Klipsch Buyers Guide 2016
1
KLIPSCH | BUYERS GUIDE SPRING 2016
THE GENESIS OF SOMETHING VERY,
VERY SPECIAL OCCURRED IN A TINY
TIN SHED IN HOPE, ARKANSAS in 1946
when Paul W. Klipsch, genius, madman and maverick, designed
and hand-built the legendary Klipschorn® speaker with the
goal of bringing live music into his living room. He was an
American audio pioneer, a true eccentric and a proud member
of the Engineering and Science Hall of Fame. He gave rise to
speaker technologies that would forever impact generations of
music lovers. His passion enabled theirs.
Over time, Klipsch speakers have become the stuff of legends.
People swear by our breakthroughs in modern acoustics, citing
something akin to a religious experience with every listen.
Remember great sound? We never forgot. We are here to keep
the flame burning for our legions of loyal, rabid fans. We’re
here to pass the legacy along. We are knights and humble
servants of audio’s holy grail.
We are the KEEPERS OF THE SOUND .
®
1
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
TABLE OF CONTENTS
COMPONENT AUDIO
POWERED AUDIO SYSTEMS
HEADPHONES
REFERENCE PREMIERE
4
HD WIRELESS
21
REFERENCE
26
DOLBY ATMOS®
8
SOUNDBARS
23
X SERIES
27
REFERENCE
11
OVAL EAR TIPS
29
SUBWOOFERS
14
KLIPSCH GALLERY®
16
THX ULTRA2
18
ARCHITECTURAL
OUTDOOR
PROFESSIONAL THX
31
CP SERIES
41
REFERENCE
33
ALL-WEATHER
42
2
KLIPSCH | BUYERS GUIDE SPRING 2016
3
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
REFERENCE PREMIERE SPEAKERS
We had a mission for the brand new Klipsch Reference Premiere home theater system: blow the doors
off the expectations of our loyal following, and get our fans so close to their music they can touch it.
We have melded our engineering expertise and state of the art technology together to produce home
theater speakers that will have people falling in love with their music again!
FLOORSTANDERS
RP-280F
FREQUENCY RESPONSE
31Hz - 24 kHz +/- 3dB
SENSITIVITY
98dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK) 150W / 600W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
1400Hz
HIGH FREQUENCY DRIVER
1" Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
Dual 8" Cerametallic Cone Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex via rear-firing Tractrix port
INPUTS
Dual binding posts / bi-wire / bi-amp
HEIGHT
43.06” (109.4cm)
WIDTH
10.55” (26.8cm)
DEPTH
18.32” (46.5cm)
WEIGHT
62.5 lbs (28.35 kg)
FINISH
Ebony, Cherry
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 73 lbs
PART NUMBER
1060679 (Ebony)
1060680 (Cherry)
RP-260F
FREQUENCY RESPONSE
35-24kHz +/- 3dB
SENSITIVITY
97dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK) 125W/500W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
1500Hz
HIGH FREQUENCY DRIVER
1" Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
Dual 6.5" Cerametallic Cone Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex via dual rear-firing Tractrix ports
INPUTS
Dual binding posts / bi-wire / bi-amp
HEIGHT
36.6” (100.6cm)
WIDTH
9.01” (22.9cm)
DEPTH
17.65” (44.8cm)
WEIGHT
49.5 lbs (22.45 kg)
FINISH
Ebony, Cherry
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 60 lbs
PART NUMBER
1060681 (Ebony)
1060682 (Cherry)
4
KLIPSCH | BUYERS GUIDE SPRING 2016
COMPONENT AUDIO
REFERENCE PREMIERE SPEAKERS
RP-250F
FREQUENCY RESPONSE
35 - 24kHz +/- 3dB
SHIPPING QUANTITY: Single
SENSITIVITY
97dB @ 2.83V / 1m
SHIPPING WEIGHT: 44 lbs
POWER HANDLING (CONT/PEAK) 125W/500W
PART NUMBER
NOMINAL IMPEDANCE
8 Ohms Compatible
1060683 (Ebony)
CROSSOVER FREQUENCY
1700Hz
1060684 (Cherry)
HIGH FREQUENCY DRIVER
1" Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
Dual 5.25" Cerametallic Cone Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex via dual rear-firing Tractrix ports
INPUTS
Dual binding posts / bi-wire / bi-amp
HEIGHT
36.10” (91.7cm)
WIDTH
7.87” (20.0 m)
DEPTH
14.82” (37.7cm)
WEIGHT
37.6 lbs (17.06 kg)
FINISH
Ebony, Cherry
MONITORS
RP-160M
FREQUENCY RESPONSE
43-24kHz +/- 3dB
SHIPPING QUANTITY: Pair
SENSITIVITY
95dB @ 2.83V / 1m
SHIPPING WEIGHT: 44 lbs
POWER HANDLING (CONT/PEAK) 100W/400W
PART NUMBER
NOMINAL IMPEDANCE
8 Ohms Compatible
1060685 (Ebony)
CROSSOVER FREQUENCY
1500Hz
1060686 (Cherry)
HIGH FREQUENCY DRIVER
1" Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
6.5" Cerametallic Cone Woofer
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex via rear-firing Tractrix port
INPUTS
Dual binding posts/bi-wire/bi-amp
HEIGHT
16.67” (42.4cm)
WIDTH
8.81” (22.4cm)
DEPTH
12.86” (32.7cm)
WEIGHT
19.9 lbs (9.03 kg)
FINISH
Ebony, Cherry
RP-150M
FREQUENCY RESPONSE
48-25kHz +/- 3dB
SHIPPING QUANTITY: Pair
SENSITIVITY
93dB @ 2.83V / 1m
SHIPPING WEIGHT: 32 lbs
POWER HANDLING (CONT/PEAK) 75W/300W
5
PART NUMBER
NOMINAL IMPEDANCE
8 Ohms Compatible
1060687 (Ebony)
CROSSOVER FREQUENCY
1500Hz
1060688 (Cherry)
HIGH FREQUENCY DRIVER
1” Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
5.25" Cerametallic Cone Woofer
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex via rear-firing Tractrix port
INPUTS
Single binding posts
HEIGHT
14.57” (37.0cm)
WIDTH
7.67” (19.5cm)
DEPTH
10.67” (27.1 cm)
WEIGHT
14.7 lbs (6.67 kg)
FINISH
Ebony, Cherry
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
CENTER CHANNELS
RP-450C
FREQUENCY RESPONSE
58-25kHz +/- 3dB
SHIPPING QUANTITY: Single
SENSITIVITY
97dB @ 2.83V / 1m
SHIPPING WEIGHT: 41 lbs
POWER HANDLING (CONT/PEAK)
150W/600W
NOMINAL IMPEDANCE
8 Ohms Compatible
1060689 (Ebony)
CROSSOVER FREQUENCY
500Hz/1500Hz
1060690 (Cherry)
HIGH FREQUENCY DRIVER
1” Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
Quad 5.25" Cerametallic Cone Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex via rear-firing Tractrix port
INPUTS
Single Binding Posts
HEIGHT
6.81 “ (17.3cm)
WIDTH
31.13” (79.1cm)
DEPTH
14.51” (36.8cm)
WEIGHT
35.7 lbs (16.19 kg)
FINISH
Ebony, Cherry
PART NUMBER
RP-440C
FREQUENCY RESPONSE
59-25kHz +/- 3dB
SHIPPING QUANTITY: Single
SENSITIVITY
97dB @ 2.83V / 1m
SHIPPING WEIGHT: 32 lbs
POWER HANDLING (CONT/PEAK) 150W/600W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
500Hz/1500Hz
HIGH FREQUENCY DRIVER
1” Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
Quad 4" Cerametallic Cone Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass reflex via dual front-firing ports
INPUTS
Single Binding Posts
HEIGHT
5.67” (14.4cm)
WIDTH
26” (66.0cm)
DEPTH
13.54” (34.4cm)
WEIGHT
28.9 lbs (13.11 kg)
FINISH
Ebony, Cherry
PART NUMBER
1060691 (Ebony)
1060692 (Cherry)
RP-250C
SHIPPING QUANTITY: Single
FREQUENCY RESPONSE
60-25kHz +/- 3dB
SENSITIVITY
96dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK)
125W/500W
NOMINAL IMPEDANCE
8 Ohms Compatible
1060693 (Ebony)
CROSSOVER FREQUENCY
1800Hz
1060694 (Cherry)
HIGH FREQUENCY DRIVER
1” Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
Dual 5.25" Cerametallic Cone Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass reflex via dual front-firing ports
INPUTS
Single Binding Posts
HEIGHT
6.81” (17.3cm)
WIDTH
18.5” (47.0cm)
DEPTH
9.96” (25.3cm)
WEIGHT
18.4 lbs (8.35 kg)
FINISH
Ebony, Cherry
SHIPPING WEIGHT: 21 lbs
PART NUMBER
6
KLIPSCH | BUYERS GUIDE SPRING 2016
COMPONENT AUDIO
REFERENCE PREMIERE SPEAKERS
SURROUNDS
RP-250S
FREQUENCY RESPONSE
58-25kHz +/- 3dB
SENSITIVITY
95dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK)
100W/400W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
1400Hz
HIGH FREQUENCY DRIVER
Dual 1" Titanium LTS Tweeters with Hybrid Tractrix Horns
LOW FREQUENCY DRIVER
Dual 5.25" Cerametallic Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Sealed
INPUTS
Single Binding Posts
HEIGHT
13.5” (34.3cm)
WIDTH
12” (30.5cm)
DEPTH
7.92” (20.1cm)
WEIGHT
15.7 lbs (7.12 kg)
FINISH
Black
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 18 lbs
PART NUMBER
1060695
RP-240S
7
FREQUENCY RESPONSE
62-25kHz +/- 3dB
SENSITIVITY
93dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK)
75W/300W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
1500Hz
HIGH FREQUENCY DRIVER
Dual 1" Titanium LTS Tweeters with Hybrid Tractrix Horns
LOW FREQUENCY DRIVER
Dual 4" Cerametallic Cone Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Sealed
INPUTS
Single Binding Posts
HEIGHT
11.61” (29.5cm)
WIDTH
10.38” (26.4cm)
DEPTH
6.93” (17.6cm)
WEIGHT
13.2 lbs (5.99 kg)
FINISH
Black
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 15 lbs
PART NUMBER
1060696
REFERENCE PREMIERE WITH DOLBY ATMOS®
Dolby Atmos is the greatest advancement in cinema and home theater technology since the
introduction of surround sound. Audio comes from all directions, including overhead. You are literally
inside all of the action.
Klipsch proprietary speaker technologies are ideal for delivering the most immersive, dynamic Dolby
Atmos listening experience. Controlled directivity and high-performance have been an integral part of
Klipsch acoustic design principals since 1946. Your music and movies will never sound the same.
FLOORSTANDERS
RP-280FA
MAIN CHANNEL
SHIPPING QUANTITY: Single
FREQUENCY RESPONSE
32-25kHz +/- 3dB
SENSITIVITY
98dB @ 2.83V / 1m
POWER HANDLING (CONT/PEAK)
150W/600W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
1750Hz
HIGH FREQUENCY DRIVER
1” Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
Dual 8" Cerametallic Cone Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex via rear-firing Tractrix port
INPUTS
Dual Binding Posts
HEIGHT
43 “ (109.22cm)
WIDTH
10.5” (26.67cm)
DEPTH
19” (48.26cm)
WEIGHT
71.75 lbs (32.5 kg)
FINISH
Walnut Wood Veneer or Black Wood Veneer
SHIPPING WEIGHT: 87 lbs
PART NUMBER
1062294 (Black)
1062293 (Walnut)
HEIGHT CHANNEL
FREQUENCY RESPONSE
Conforms to Dolby Atmos Specification
SENSITIVITY
Conforms to Dolby Atmos Specification
POWER HANDLING (CONT/PEAK)
75W/300W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
2 kHz
HIGH FREQUENCY DRIVER
1” Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
6.5" Cerametallic Cone Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Acoustic Suspension
INPUTS
Single Binding Posts
8
KLIPSCH | BUYERS GUIDE SPRING 2016
9
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
ELEVATION
SPEAKERS
RP-140SA
Pair
FREQUENCY RESPONSE
Conforms to Dolby Atmos Specification
SHIPPING QUANTITY:
SENSITIVITY
Conforms to Dolby Atmos Specification
SHIPPING WEIGHT: 19.99 lbs
POWER HANDLING (CONT/PEAK)
50W/200W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
2 kHz
HIGH FREQUENCY DRIVER
1” Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
4" Cerametallic Cone Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Acoustic Suspension
INPUTS
Single Binding Posts
HEIGHT
7 “ (17.78cm)
WIDTH
6” (15.24cm)
DEPTH
11.25” (28.56cm)
WEIGHT
7.6 lbs (3.4 kg)
FINISH
Brushed Black Polymer Veneer
PART NUMBER
1062295
CENTER CHANNELS
RP-450CA
FREQUENCY RESPONSE
58-25kHz +/- 3dB
SHIPPING QUANTITY: Single
SENSITIVITY
97dB @ 2.83V / 1m
SHIPPING WEIGHT: 41 lbs
POWER HANDLING (CONT/PEAK)
150W/600W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
500Hz/1500Hz
HIGH FREQUENCY DRIVER
1” Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
Quad 5.25" Cerametallic Cone Woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex via rear-firing Tractrix port
INPUTS
Single Binding Posts
HEIGHT
6.81 “ (17.3cm)
WIDTH
31.13” (79.1cm)
DEPTH
14.51” (36.8cm)
WEIGHT
35.7 lbs (16.19 kg)
FINISH
Walnut Wood Veneer or Black Wood Veneer
PART NUMBER
1062298 (Black)
1062297 (Walnut)
10
KLIPSCH | BUYERS GUIDE SPRING 2016
REFERENCE SPEAKERS
The Klipsch Reference home theater speaker systems embody the same advanced acoustic engineering,
inspired industrial design and quality materials as its iconic predecessors in the current Reference II
series, delivering a legendary, powerful sonic signature at an affordable price.
These Reference Series systems capture every detail and bring movies and music to life using our
exclusive Tractrix® Horn technology, Linear Travel Suspension (LTS) tweeters, copper-spun Injection
Molded Graphite (IMG) woofers, and exclusive Wide Dispersion Surround Technology (WDST).
FLOORSTANDERS
R-28F
FREQUENCY RESPONSE
35 Hz - 24 kHz +/- 3dB
SENSITIVITY
98dB
POWER HANDLING (CONT/PEAK) 150W/600W
NOMINAL IMPEDANCE
8 Ohms Compatible
LOW FREQUENCY EXTENSION
32Hz
CROSSOVER FREQUENCY
1800Hz
HIGH FREQUENCY DRIVER
1" (2.54cm) Aluminum diaphragm compression driver mated to
90° x 90° square Tractrix® Horn
LOW FREQUENCY DRIVER
Dual 8" (20.3cm), copper spun magnetically shielded IMG woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass-reflex via front-firing port
INPUTS
Dual binding posts / bi-wire / bi-amp
HEIGHT
42" (106.6cm)
WIDTH
9.5” (24.1cm)
DEPTH
15.7” (39.8 m)
WEIGHT
56.67 lbs (25.68kg)
FINISH
Brushed Black Polymer Veneer
SHIPPING QUANTITY:
Single
SHIPPING WEIGHT: 66.1 lbs
PART NUMBER
1060672
R-26F
FREQUENCY RESPONSE
38Hz - 24 kHz +/- 3dB
SENSITIVITY
97dB
POWER HANDLING (CONT/PEAK) 100W400W
11
NOMINAL IMPEDANCE
8 Ohms Compatible
LOW FREQUENCY EXTENSION
35Hz
CROSSOVER FREQUENCY
1800Hz
HIGH FREQUENCY DRIVER
1” (2.54cm) Aluminum diaphragm compression driver mated to
90° x 90° square Tractrix® Horn
LOW FREQUENCY DRIVER
Dual 6.5" (16.5cm), copper spun magnetically shielded IMG woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass-reflex via front-firing port
INPUTS
Dual binding posts / bi-wire / bi-amp
HEIGHT
39" (99.1 cm)
WIDTH
13.5" (34.5cm)
DEPTH
7.8" (19.8cm)
WEIGHT
41.9 lbs (19.02kg)
FINISH
Brushed Black Polymer Veneer
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY:
Single
SHIPPING WEIGHT: 47.4 lbs
PART NUMBER
1060673
COMPONENT AUDIO
REFERENCE SPEAKERS
R-24F
FREQUENCY RESPONSE
38Hz - 24kHz +/- 3dB
SENSITIVITY
97dB
POWER HANDLING (CONT/PEAK) 100W/400W
NOMINAL IMPEDANCE
8 Ohms Compatible
LOW FREQUENCY EXTENSION
35Hz
CROSSOVER FREQUENCY
1800Hz
HIGH FREQUENCY DRIVER
1” (2.54cm) Aluminum diaphragm compression driver mated to
90° x 90° square Tractrix® Horn
LOW FREQUENCY DRIVER
Dual 6.5" (16.5cm), copper spun magnetically shielded IMG woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass-reflex via front-firing port
INPUTS
Dual binding posts / bi-wire / bi-amp
HEIGHT
39" (99.1cm)
WIDTH
13.5" (34.5cm)
DEPTH
7.8" (19.8cm)
WEIGHT
41.9 lbs (19.02 kg)
FINISH
Brushed Black Polymer Veneer
SHIPPING QUANTITY:
Single
SHIPPING WEIGHT: 47.4 lbs
PART NUMBER
1060673
MONITORS
R-15M
FREQUENCY RESPONSE
62 Hz - 24 kHz +/- 3dB
SENSITIVITY
94dB
POWER HANDLING (CONT/PEAK) 85W/340W
NOMINAL IMPEDANCE
8 Ohms Compatible
LOW FREQUENCY EXTENSION
54Hz
CROSSOVER FREQUENCY
1800Hz
HIGH FREQUENCY DRIVER
1” (2.54cm) Aluminum diaphragm compression driver mated to
90° x 90° square Tractrix® Horn
LOW FREQUENCY DRIVER
5.25" (13.3cm), copper spun magnetically shielded IMG woofer
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass-reflex via rear-firing port
INPUTS
Single binding posts
HEIGHT
12.5" (31.8cm)
WIDTH
8.11" (20.6cm)
DEPTH
7" (178cm)
WEIGHT
10.3 lbs (4.67 kg)
FINISH
Brushed Black Polymer Veneer
SHIPPING QUANTITY:
Pair
SHIPPING WEIGHT: 23.6 lbs
PART NUMBER
1060675
12
KLIPSCH | BUYERS GUIDE SPRING 2016
R-14M
FREQUENCY RESPONSE
64 Hz - 24 kHz +/- 3dB
SENSITIVITY
90dB
POWER HANDLING (CONT/PEAK) 50W/200W
NOMINAL IMPEDANCE
8 Ohms Compatible
LOW FREQUENCY EXTENSION
58Hz
CROSSOVER FREQUENCY
2250Hz
HIGH FREQUENCY DRIVER
1” (2.54cm) Aluminum diaphragm compression driver mated to
90° x 90° square Tractrix® Horn
LOW FREQUENCY DRIVER
4" (10.2cm) copper spun magnetically shielded IMG woofer
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass-reflex via rear-firing port
INPUTS
Single binding posts
HEIGHT
9.75" (24.8cm)
WIDTH
5.88" (14.9cm)
DEPTH
7.5" (19.1cm)
WEIGHT
7.13 lbs (3.2kg)
FINISH
Brushed Black Polymer Veneer
SHIPPING QUANTITY:
Pair
SHIPPING WEIGHT: 16.31 lbs
PART NUMBER
1061247
CENTER CHANNELS
R-25C
FREQUENCY RESPONSE
82 Hz - 24 kHz +/- 3dB
SENSITIVITY
98dB
POWER HANDLING (CONT/PEAK) 100W/400W
NOMINAL IMPEDANCE
8 Ohms Compatible
LOW FREQUENCY EXTENSION
74Hz
CROSSOVER FREQUENCY
1800Hz
HIGH FREQUENCY DRIVER
1” (2.54cm) Aluminum diaphragm compression driver mated to
90° x 90° square Tractrix® Horn
LOW FREQUENCY DRIVER
Dual 5.25" (13.3cm), copper spun magnetically shielded IMG woofers
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass-reflex
INPUTS
Single binding posts
HEIGHT
7.25" (184.2cm)
WIDTH
18.75" (47.6 cm)
DEPTH
7.25" (18.42cm)
WEIGHT
14.8 lbs (6.73kg)
FINISH
Brushed Black Polymer Veneer
SHIPPING QUANTITY:
Single
SHIPPING WEIGHT: 16.6 lbs
PART NUMBER
1060677
SURROUNDS
R-14S
FREQUENCY RESPONSE
83 Hz - 24 kHz +/- 3dB
SENSITIVITY
89dB
POWER HANDLING (CONT/PEAK) 50W/200W
13
NOMINAL IMPEDANCE
8 Ohms Compatible
LOW FREQUENCY EXTENSION
78Hz
CROSSOVER FREQUENCY
2200Hz
HIGH FREQUENCY DRIVER
Dual 1” (2.54cm) Aluminum diaphragm compression driver mated to
90° x 90° square Tractrix® Horn
LOW FREQUENCY DRIVER
4" (10.2cm) copper spun IMG woofer
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Sealed (WDST)
INPUTS
Single binding posts
HEIGHT
6.66" (16.9cm)
WIDTH
15" (38.1cm)
DEPTH
6.5" (16.5cm)
WEIGHT
8 lbs (3.6kg)
FINISH
Brushed Black Polymer Veneer
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY:
Pair
SHIPPING WEIGHT: 18.5 lbs
PART NUMBER
1060678
COMPONENT AUDIO
REFERENCE SPEAKERS / REFERENCE SUBWOOFERS
REFERENCE SUBWOOFERS
Prepare to be moved. Reference subwoofers are the perfect combination of power, sophistication and
heart-pounding bass. Packing a serious punch, these subwoofers will not only wake your neighbors,
they’ll piss them off. The way only Klipsch can.
Reference Subwoofers provide thunderous, detailed bass and create a solid foundation for any
audio system.
SUBWOOFERS
R-115SW
FREQUENCY RESPONSE
18 Hz - 125 Hz +/- 3dB
MAXIMUM ACOUSTIC OUTPUT
122dB
AMPLIFIER
All digital
AMPLIFIER POWER
400W / 800W
DRIVE COMPONENTS
15" (38.1 cm) long-throw copper spun cerametallic, front-firing woofer
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex
INPUTS
L/R line-level/LFE RCA jacks, Wireless WA-2 Port
HEIGHT
21.5" (54.61cm)
WIDTH
19.5" (49.53cm)
DEPTH
22.3" (56.64cm)
WEIGHT
75.4 lbs (34.2kg)
FINISH
Brushed Black Polymer Veneer
FEATURES
Gain, Lowpass, Phase, Auto Power
PHASE
Switchable 0-180 degrees
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 79 lbs
PART NUMBER
1060701 (120V)
1060942 (230V)
R-112SW
Single
FREQUENCY RESPONSE
24 Hz - 125 Hz +/- 3dB
MAXIMUM ACOUSTIC OUTPUT
118dB
AMPLIFIER
All digital
AMPLIFIER POWER
300W / 600W
1060700 (120V)
DRIVE COMPONENTS
12" (30.5 cm) long-throw copper spun cerametallic, front-firing woofer
1060941 (230V)
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex
INPUTS
L/R line-level/LFE RCA jacks, Wireless WA-2 Port
HEIGHT
17.38" (41.4cm)
WIDTH
15.5" (39.37cm)
DEPTH
18.25" (46.36cm)
WEIGHT
48.75 lbs (22.1kg)
FINISH
Brushed Black Polymer Veneer
FEATURES
Gain, Lowpass, Phase, Auto Power
PHASE
Switchable 0-180 degrees
SHIPPING QUANTITY:
SHIPPING WEIGHT: 55.6 lbs
PART NUMBER
14
KLIPSCH | BUYERS GUIDE SPRING 2016
R-110SW
FREQUENCY RESPONSE
27 Hz - 125 Hz +/- 3dB
MAXIMUM ACOUSTIC OUTPUT
114dB
AMPLIFIER
All digital
AMPLIFIER POWER
200W / 450W
DRIVE COMPONENTS
10" (25.4 cm) long-throw copper spun cerametallic, front-firing woofer
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex
INPUTS
L/R line-level/LFE RCA jacks, Wireless WA-2 Port
HEIGHT
16.3" (41.4cm)
WIDTH
14.75" (37.37cm)
DEPTH
15.8" (40.13cm)
WEIGHT
39.25 lbs (17.8kg)
FINISH
Brushed Black Polymer Veneer
FEATURES
Gain, Lowpass, Phase, Auto Power
PHASE
Switchable 0-180 degrees
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 43 lbs
PART NUMBER
1060699 (120V)
1060940 (230V)
R-12SW
FREQUENCY RESPONSE
29 Hz - 120 Hz +/- 3dB
MAXIMUM ACOUSTIC OUTPUT
116dB
AMPLIFIER
All digital
AMPLIFIER POWER
200W / 400W
DRIVE COMPONENTS
12" (30.5 cm) high excursion, IMG, front-firing woofer
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex
INPUTS
L/R line-level RCA jacks, L/R high level speaker binding posts
HEIGHT
16" (40.64cm) 16.5" with feet
WIDTH
14" (35.56cm)
DEPTH
18.5" (47 cm) 19.2" with grille
WEIGHT
33 lbs (15kg)
FINISH
Brushed Black Polymer Veneer
FEATURES
Volume, Lowpass, Phase, Auto Power
PHASE
Switchable 0-180 degrees
SHIPPING QUANTITY:
Single
SHIPPING WEIGHT: 34.4 lbs
PART NUMBER
1060699 (120V)
1060940 (230V)
R-10SW
FREQUENCY RESPONSE
32 Hz - 120 Hz +/- 3dB
MAXIMUM ACOUSTIC OUTPUT
112dB
AMPLIFIER
All digital
AMPLIFIER POWER
150W / 300W
DRIVE COMPONENTS
10" (25.4cm) high excursion, IMG, front-firing woofer
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex
INPUTS
Line level/LFE RCA jacks
HEIGHT
14" (35.56 cm) 14.5" with feet
WIDTH
12.5" (31.75cm)
DEPTH
15.7" (39.8cm) 16.4" with grille
WEIGHT
25.5 lbs (11.6kg)
FINISH
Brushed Black Polymer Veneer
FEATURES
Volume, Lowpass, Phase, Auto Power
PHASE
Switchable 0-180 degrees
SHIPPING QUANTITY:
Single
SHIPPING WEIGHT: 27.3 lbs
PART NUMBER
1016570 (120V)
1060929 (230V)
WIRELESS KIT
WA-2 WIRELESS SUBWOOFER KIT
15
FREQUENCY OF OPERATION
2.4 GHz ISM band
CHANNEL SELECTION
Automatic
SIGNAL RANGE
50 feet (15m)
FREQUENCY RESPONSE
15 Hz - 150 Hz +/- 3 dB
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY:
Single
SHIPPING WEIGHT: 1.01 lbs
PART NUMBER
1011669
COMPONENT AUDIO
REFERENCE SUBWOOFERS / GALLERY SERIES
KLIPSCH GALLERY® SERIES
Klipsch Gallery is the first true cross-over home audio solution, offering minimalist home theater system
speakers that add beauty to any room.
Combining powered and passive speaker product offerings, the series is a true manifestation of how
audio and video content is and will be consumed in the future. With its modern-day aesthetic and
legendary sonic signature, a new brand era begins.
SOUNDBARS
G-42
FREQUENCY RESPONSE
65 Hz - 24 kHz +/- 3dB
SENSITIVITY
92dB
POWER HANDLING (CONT/PEAK) 50W/200W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
2200Hz
HIGH FREQUENCY DRIVER
Three 1” (2.54cm) Titanium diaphragm compression drivers mated to
90° x 90° square Tractrix Horn
LOW FREQUENCY DRIVER
Four 3.5” (8.89cm) active long-throw IMG woofers
(One each for left and right channels, two for center channel)
ENCLOSURE TYPE
Bass-reflex
INPUTS
Single wire 5-way binding posts (3 sets)
HEIGHT
6” (15.24cm)
WIDTH
42” (106.68cm)
DEPTH
2.4” (6.10cm)
WEIGHT
12 lbs (5.44 kg)
FINISH
High Gloss Black
SHIPPING QUANTITY:
Single
SHIPPING WEIGHT: 18.28 lbs
PART NUMBER
1012669
LCR SPEAKERS
G-28
FREQUENCY RESPONSE
55 Hz - 24 kHz +/- 3dB
SENSITIVITY
94dB
POWER HANDLING (CONT/PEAK) 75W/300W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
2200Hz
HIGH FREQUENCY DRIVER
1” (2.54cm) Titanium diaphragm compression drivers mated to
90° x 90° square Tractrix Horn
LOW FREQUENCY DRIVER
Two 3.5” (8.89 cm) active long-throw IMG woofers,
Four 3.5” (8.89 cm) passive IMG woofers
ENCLOSURE TYPE
Bass-reflex via passive radiators
INPUTS
Single wire 5-way binding posts
HEIGHT
28.5” (72.39cm)
WIDTH
6” (15.24cm)
DEPTH
2.4” (6.10cm)
WEIGHT
8 lbs (3.63 kg)
MOUNTING
Dual keyhole mounts, mounting bracket and template
FINISH
High Gloss Black
SHIPPING QUANTITY: Single
SHIPPING WEIGHT:
14 lbs
PART NUMBER
1012670
16
KLIPSCH | BUYERS GUIDE SPRING 2016
G-16
FREQUENCY RESPONSE
67 Hz - 24 kHz +/- 3dB
SENSITIVITY
94dB
POWER HANDLING (CONT/PEAK) 75W/300W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
2200Hz
HIGH FREQUENCY DRIVER
1” (2.54cm) Titanium diaphragm compression driver mated to
90° x 90° square Tractrix Horn
LOW FREQUENCY DRIVER
Two 3.5” (8.89 cm) long-throw IMG woofers
ENCLOSURE TYPE
Bass-reflex
INPUTS
Single wire 5-way binding posts
HEIGHT
16” (40.64cm)
WIDTH
6” (15.24 cm)
DEPTH
2.4” (6.10cm)
WEIGHT
5.25 lbs (2.38 kg)
MOUNTING
Dual keyhole mounts
FINISH
High Gloss Black
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 10.1 lbs
PART NUMBER
1012954
G-12
FREQUENCY RESPONSE
69 Hz - 24 kHz +/- 3dB
SENSITIVITY
91dB
POWER HANDLING (CONT/PEAK) 50W/200W
17
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
2200Hz
HIGH FREQUENCY DRIVER
1” (2.54cm) Titanium diaphragm compression driver mated to
90° x 90° square Tractrix Horn
LOW FREQUENCY DRIVER
3.5” (8.89 cm) long-throw IMG woofer
ENCLOSURE TYPE
Bass-reflex
INPUTS
Single wire 5-way binding posts
HEIGHT
12” (30.48cm)
WIDTH
6” (15.24 cm)
DEPTH
2.4” (6.10cm)
WEIGHT
3.75 lbs (1.7kg)
MOUNTING
Dual keyhole mounts
FINISH
High Gloss Black
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 7.5 lbs
PART NUMBER
1012955
COMPONENT AUDIO
GALLERY SERIES / THX ULTRA2 SERIES
THX® ULTRA2™ SERIES
Utilizing the same professional-grade technology as our renowned commercial theater systems, every
Klipsch THX® Ultra2 speaker brings real cinema sound to the comforts of home. Expertly delivering the raw
explosiveness and fine detail of any film format, these products, which can be assembled in a variety of
combinations, will forever shatter your expectations for home theater performance.
LCR SPEAKERS
KL-650-THX
FREQUENCY RESPONSE
48 Hz - 20 kHz +/- 3dB
SENSITIVITY
97dB
POWER HANDLING (CONT/PEAK) 150W/600W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
1400Hz
HIGH FREQUENCY DRIVER
1” (2.5cm) magnetically shielded, titanium-dome compression driver
with 9.6 oz ceramic magnet structure with a 10” x 6” rectangular 90ºx 60º Tractrix Horn
LOW FREQUENCY DRIVER
Two 6.5” (16.5cm) magnetically shielded, Cerametallic cone, cast aluminum frame woofers
ENCLOSURE MATERIAL
Medium density fiberboard (MDF)
ENCLOSURE TYPE
Bass reflex via front-firing port
INPUTS
Two sets of binding post speaker terminals (connected via bass strap jumpers)
HEIGHT
15” (38.1cm)
WIDTH
17” (43.2cm)
DEPTH
12.5” (31.8cm)
WEIGHT
39 lbs (17.7 kg)
MOUNTING
4-bolt pattern 1/4”-20 threaded inserts
FINISH
Galaxy Black cabinet with Black anodized aluminum fascia
SHIPPING QUANTITY:
Single
SHIPPING WEIGHT:
45.5 lbs
PART NUMBER
1010651 (Left)
1010650 (Right)
KL-525-THX
FREQUENCY RESPONSE
80 Hz - 20 kHz +/- 3dB
SENSITIVITY
94dB
POWER HANDLING (CONT/PEAK) 100W/400W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
1500Hz
HIGH FREQUENCY DRIVER
1” (2.5cm) magnetically shielded, titanium-dome compression driver
with 9.6 oz ceramic magnet structure with a 10” x 6” rectangular 90ºx 60º Tractrix Horn
LOW FREQUENCY DRIVER
Two 5.25” (13.3cm) magnetically shielded, Cerametallic cone, cast aluminum frame woofers
ENCLOSURE MATERIAL
Medium density fiberboard (MDF)
ENCLOSURE TYPE
Sealed
INPUTS
Two sets of binding post speaker terminals (connected via bass strap jumpers)
HEIGHT
12.75” (32.4cm)
WIDTH
16” (40.6cm)
DEPTH
12.5” (31.8cm)
WEIGHT
32 lbs (14.5kg)
MOUNTING
4-bolt pattern 1/4”-20 threaded inserts
FINISH
Galaxy Black cabinet with Black anodized aluminum fascia
SHIPPING QUANTITY:
Single
SHIPPING WEIGHT:
45.5 lbs
PART NUMBER
1010648
18
KLIPSCH | BUYERS GUIDE SPRING 2016
SURROUNDS
KS-525-THX
FREQUENCY RESPONSE
80 Hz - 20 kHz +/- 3dB
SENSITIVITY
96dB
POWER HANDLING (CONT/PEAK) 100W/400W
NOMINAL IMPEDANCE
8 Ohms Compatible
CROSSOVER FREQUENCY
2100Hz
HIGH FREQUENCY DRIVER
Two 1” (2.5cm) magnetically shielded, titanium-dome compression driver
with 9.6 oz ceramic magnet structure with a 5” square 90ºx 60º Tractrix Horn
LOW FREQUENCY DRIVER
Two 5.25” (13.3cm) magnetically shielded, Cerametallic cone, cast aluminum frame woofers
ENCLOSURE MATERIAL
Medium density fiberboard (MDF)
ENCLOSURE TYPE
Sealed
INPUTS
Two sets of binding post speaker terminals (connected via bass strap jumpers)
HEIGHT
13.75” (35cm)
WIDTH
13” (33cm)
DEPTH
8.5” (21.6cm)
WEIGHT
20 lbs (9.1kg)
MOUNTING
Dual keyholes and 2-bolt pattern 1/4”-20 threaded inserts
FINISH
Galaxy Black cabinet with Black anodized aluminum fascia
SHIPPING QUANTITY:
Pair
SHIPPING WEIGHT: 44.75 lbs
PART NUMBER
1010647
SUBWOOFER
KW-120-THX
FREQUENCY RESPONSE
20 Hz - 200 Hz +/- 3dB
MAX ACOUSTIC OUTPUT
130dB @ 30Hz, 122dB @ 20Hz, [email protected] 15Hz 1/8 space,
1 meter (2 enclosures side-by-side per THX Ultra2)
AMPLIFIER
Use only with KA-1000-THX
NOMINAL IMPEDANCE
8 Ohms Compatible
LOW FREQUENCY DRIVER
12” (30.5cm) front-firing, Cerametallic cone, cast aluminum frame drivers
with a 240oz ceramic magnet structure
ENCLOSURE MATERIAL
Medium density fiberboard (MDF)
ENCLOSURE TYPE
Bass reflex via front-firing port
INPUTS
1 Speakon NL2 jack and included cable
HEIGHT
20.25” (51.4cm)
WIDTH
17.75” (45.1cm)
DEPTH
17.75” (31.8cm)
WEIGHT
80 lbs (36.3kg)
FINISH
Galaxy Black cabinet with Black anodized aluminum fascia
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 93 lbs
PART NUMBER
1010649
AMPLIFIERS
KA-1000-THX
19
FREQUENCY RESPONSE
20 Hz - 1 kHz +/- 3dB
AMPLIFIER
High-Efficiency Class D
AMPLIFIER POWER
FTC Rated Power: 500W into 8 ohms, 1000W into 4 ohms, 20Hz-1kHz @ <1.5% THD
Dynamic Power: 2050W into 8 ohms, 3025W into 4 ohms @ 5% THD
AUTO POWER ON
2 second ON delay, 15 minute off delay
LOW PASS CROSSOVER
Continuously variable from 40Hz-120Hz, 24dB/octave slope above 120z (non-THX mode)
INPUTS
2 Gold-plated RCA phono jacks
OUTPUTS
2 Gold-plated RCA phono jacks (unfiltered)
2 Speakon® NL2 jacks
DIMENSIONS
4.75” (12.1cm) H x 17.5” (44.5cm) W x 12.25” (31.1cm) D
FINISH
Black anodized aluminum
VOLTAGE
110/120 VAC 60Hz
EXPORT VOLTAGE
230 VAC 50/60Hz
FEATURES
THX On/Off
Boundary Gain Compensation On/Off
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 31 lbs
PART NUMBER
221200080011 (12OV)
221200080012 (230V)
20
KLIPSCH | BUYERS GUIDE SPRING 2016
REFERENCE PREMIERE | HD WIRELESS
70 years of Klipsch acoustic development integrate wireless technology to bring you Reference Premiere HD
Wireless. This award winning system is extremely simple to set up, yet delivers lossless, high-fidelity audio.
Whether you’re an audiophile that prefers stereo playback of high quality music files, a movie enthusiast
that wants a true cinema experience, or just want great sound without the hassle of wires and an
A/V receiver - Klipsch Reference Premiere HD Wireless will reinvent and simplify the way you enjoy
your music and movies - with all the power, detail and emotion you expect from Klipsch.
HD CONTROL CENTER (RP-HUB1)
NEW!
• 4x HDMI with 4k Pass-through
(1 port includes HDMI 2.0 and HDCP 2.2 support)
• 2x Digital Audio (1x Coaxial and 1x Optical)
• 1x Analog Audio
• Bluetooth ® wireless technology
• 3.5mm IR input
INPUTS
AUDIO FORMATS SUPPORTED
• 2 channel PCM up to 192kHz (HDMI and SPDIF)
• 6 channel PCM up to 192khz (HDMI)
• 8 channel PCM up to 96kHz (HDMI)
• Dolby® Digital Plus bitstream (HDMI and SPDIF)
• DTS® bitstream (HDMI and SPDIF)
AUDIO POST PROCESSING
• Dolby Pro-Logic IIx
• DTS Neo:6
• Proprietary Bass Management (when used with Klipsch speakers)
• Voice Enhance and Night Modes
OUTPUTS
• 8 channel WiSA-compliant wireless audio up to 24-bit/96kHz
• 1 HDMI 2.0 port with HDCP 2.2 support
HEIGHT
1.9" (48.3mm)
WIDTH
9.3" (236.2mm)
DEPTH
6.0" (152.4mm)
WEIGHT
1.2 lbs (0.54kg)
FINISH
Black
RP-440WF
FREQUENCY RESPONSE
SHIPPING WEIGHT: 3 lbs
PART NUMBER
1062372
NEW!
48 Hz - 25 kHz +/- 3dB
AMPLIFIER POWER (CONT/PEAK) 125W/250W
21
SHIPPING QUANTITY: Single
CROSSOVER FREQUENCY
Tapered array 200 Hz (2 lower woofers), 1.8 kHz (2 upper woofers)
HIGH FREQUENCY DRIVER
1” Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
4 x 4.5” Cerametallic Cone Woofers
WIRELESS TECHNOLOGY
WiSA wireless technology, Up to 24 bit / 96 kHz
LATENCY
≤5mS
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex via rear-firing Tractrix port
HEIGHT
41.1" (1042.9mm)
WIDTH
8.6" (219.5mm)
DEPTH
11.7" (297.3mm)
WEIGHT
36.5 lbs (16.6kg)
FINISH
Brushed Black Polymer Veneer
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 34.98 lbs
PART NUMBER
1062365
POWERED AUDIO SYSTEMS
RP-140WM
REFERENCE PREMIERE | HD WIRELESS
NEW!
FREQUENCY RESPONSE
56 Hz - 25 kHz +/- 3dB
AMPLIFIER POWER (CONT/PEAK)
50W/100W
CROSSOVER FREQUENCY
1.8 kHz
HIGH FREQUENCY DRIVER
1” Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
1 x 4.5” Cerametallic Cone Woofer
WIRELESS TECHNOLOGY
WiSA wireless technology, Up to 24 bit / 96 kHz
LATENCY
≤5mS
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex via rear-firing Tractrix port
HEIGHT
13.1" (331.6mm)
WIDTH
7.2" (181.6mm)
DEPTH
11.0" (278.7mm)
WEIGHT
13.0 lbs (5.9kg)
FINISH
Brushed Black Polymer Veneer
RP-440WC
FREQUENCY RESPONSE
48 Hz - 25 kHz +/- 3dB
CROSSOVER FREQUENCY
Tapered array 200 Hz (2 outer woofers), 1.8 kHz (2 inner woofers)
HIGH FREQUENCY DRIVER
1” Titanium LTS Tweeter with Hybrid Cross-Section Tractrix Horn
LOW FREQUENCY DRIVER
4 x 4.5” Cerametallic Cone Woofers
WIRELESS TECHNOLOGY
WiSA wireless technology, Up to 24 bit / 96 kHz
LATENCY
≤5mS
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex via rear-firing Tractrix port
HEIGHT
41.1" (1042.9mm)
WIDTH
8.6" (219.5mm)
DEPTH
11.7" (297.3mm)
WEIGHT
36.5 lbs (16.6kg)
FINISH
Brushed Black Polymer Veneer
FREQUENCY RESPONSE
Pair
PART NUMBER
1062366
NEW!
AMPLIFIER POWER (CONT/PEAK) 125W/250W
RP-110WSW
SHIPPING QUANTITY:
SHIPPING WEIGHT: 31.98 lbs
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 34.98 lbs
PART NUMBER
1062360
NEW!
27 Hz - 125 Hz +/- 3dB
AMPLIFIER POWER (CONT/PEAK) 250W/500W
LOW FREQUENCY DRIVER
1 x 10” (25.4cm) long-throw copper spun cerametallic, front firing woofer
WIRELESS TECHNOLOGY
WiSA wireless technology, Up to 24 bit / 96 kHz
LATENCY
≤5mS
ENCLOSURE MATERIAL
MDF
ENCLOSURE TYPE
Bass Reflex
HEIGHT
16.3" (413.7mm)
WIDTH
14" (355.6mm)
DEPTH
17.1" (434.2mm)
WEIGHT
41.8 lbs (19.0kg)
FINISH
Brushed Black Polymer Veneer
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 44.99 lbs
PART NUMBER
1062371
22
KLIPSCH | BUYERS GUIDE SPRING 2016
REFERENCE SOUNDBARS
Combining the left, right and center channels into one slick package, our soundbars will free you from
underperforming TV speakers and deliver a world of powerful, crisp sound in an extremely thin package.
A soundbar should be more than just a larger and louder version of the diminutive TV speakers it is replacing.
Another primary function should be to increase sonic details, especially in the midrange frequency area and
above, in order to significantly improve dialogue clarity that is extremely lacking with most of today’s flat panel TVs.
The Reference soundbars address this need with a proven technology consistently refined over Klipsch’s
legendary 70 years plus loudspeaker experience: horn-loading.
R-20B
SPEAKER SYSTEM
2-way soundbar with 10” wireless subwoofer
SHIPPING QUANTITY: Single
PEAK AMPLIFIER OUTPUT
250 Watts peak system power
SHIPPING WEIGHT: 49.4 lbs
SYSTEM FREQUENCY RESPONSE 27.5Hz – 20kHz +/- 3dB
SUBWOOFER FREQUENCY RESPONSE 27.5Hz – 129Hz +/- 3dB
MAX ACOUSTIC OUTPUT
113dB
HIGH FREQUENCY DRIVER
Two .75” (19mm) textile dome tweeters mated to dual 90° x 90° Tractrix Horns
MIDRANGE
Four 3” (76mm) polypropylene drivers
SUBWOOFER
One 10” (254mm) side-firing fiber composite cone/ported enclosure. MDF cabinet
INPUTS
1 Optical digital, 1 Stereo RCA, Bluetooth®
SOUNDBAR DIMENSIONS
40” (1015.8mm) W x 2.8” (71mm) D x 4.1” (105.1mm) H
SUBWOOFER DIMENSIONS
9.1” (230mm) W x 18” (457mm) D x 13.7” (349mm) H
WEIGHT
Soundbar: 8.5 lbs (3.9kg))
Subwoofer: 26 lbs (11.8 KG)
MOUNTING
Two built-in keyhole mounts for wall mounting, also includes removable rubber feet
for tabletop positioning
FINISH
Soundbar: Satin black
Subwoofer: Brushed Black Vinyl
INCLUDED ACCESSORIES
(1) 1.5m optical cable
(1) Pair of rubber feet
(1) Wall mounting template
(1) Ergonomic remote control
(1) Power supply
PART NUMBER
1061190
R-10B
23
SPEAKER SYSTEM
2-way soundbar with 8” wireless subwoofer
PEAK AMPLIFIER OUTPUT
250 Watts peak system power
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 42.1 lbs
SYSTEM FREQUENCY RESPONSE 29Hz – 20kHz +/- 3dB
PART NUMBER
SUBWOOFER FREQUENCY RESPONSE 29Hz – 142Hz +/- 3dB
1060902
MAX ACOUSTIC OUTPUT
110dB
HIGH FREQUENCY DRIVER
Two .75” (19mm) textile dome tweeters mated to dual 90° x 90° Tractrix Horns
MIDRANGE
Two 3” (76mm) polypropylene drivers
SUBWOOFER
One 8” (203mm) side-firing fiber composite cone/ported enclosure. MDF cabinet
INPUTS
1 Optical digital, 1 Stereo RCA, Bluetooth®
SOUNDBAR DIMENSIONS
40” (1015.8mm) W x 2.8” (71mm) D x 4.1” (105.1mm) H
SUBWOOFER DIMENSIONS
8.3” (210mm) W x 16” (406.4mm) D x 13.2” (336.4mm) H
WEIGHT
Soundbar: 7 lbs (3.2 kg)
Subwoofer: 25.1 lbs (11.4 kg)
MOUNTING
Two built-in keyhole mounts for wall mounting, also includes removable rubber feet
for tabletop positioning
FINISH
Soundbar: Satin black
Subwoofer: Brushed Black Vinyl
INCLUDED ACCESSORIES
(1) 1.5m optical cable
(1) Pair of rubber feet
(1) Wall mounting template
(1) Remote control
(1) Power supply
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
POWERED AUDIO SYSTEMS
R-4B
REFERENCE SOUNDBARS / R-15PM
NEW!
SPEAKER SYSTEM
2-way soundbar with 6” wireless subwoofer
SHIPPING QUANTITY: Single
MAX ACOUSTIC OUTPUT
106dB
SHIPPING WEIGHT: 18.49 lbs
HIGH FREQUENCY DRIVER
2 x .75” Soft dome tweeters mated to 90 x 90 Tractrix horns
MIDRANGE
2 X 2.5” Fiber composite cone woofers
SUBWOOFER
6.5” Down firing Fiber composite cone
INPUTS
1 Optical, Stereo Analog, Bluetooth ® wireless technology, USB Type A
SOUNDBAR DIMENSIONS
40” (1016mm) W x 3.375” (85.7mm) D x 3.5” (88.9mm) H
SUBWOOFER DIMENSIONS
6.3” (160mm) W x 14.17” (360mm) D x 10.4”(255mm) H (including feet)
SOUNDBAR WEIGHT
5.8 lbs (2.6kg)
SUBWOOFER WEIGHT
8 lbs (3.6kg)
FINISH
Soundbar: Satin black
Subwoofer: Wood/brushed black vinyl
INCLUDED ACCESSORIES
(1) Wall Mounting Template
(1) Remote Control
(1) Optical Cable (1.8m)
(1) Power Supply
PART NUMBER
1062351
24
KLIPSCH | BUYERS GUIDE SPRING 2016
25
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
REFERENCE SERIES HEADPHONES
After 70 years of making legendary loudspeakers, we built upon our bold audio heritage to revolutionize
the headphone industry. Since 2007 we have been creating the most innovative headphones on the
market. We are the performance and comfort winners. Period.
The same advanced acoustic engineering and industrial design from our legendary Reference home
theater speakers provide the performance, voice and design for the Klipsch Reference headphones.
They are engineered for pure performance and designed to be the best sounding most comfortable
headphones on Earth and the embodiment of legendary Klipsch sound.
ON-EAR
REFERENCE ON-EAR
SHIPPING QUANTITY: Single
DRIVER DESIGN
Dynamic 40mm Moving Coil
DRIVER COMPONENTS
Full Range KG-105
DRIVER DIAMETER
40 mm
PART NUMBER
MIC/REMOTE
mic+3-button remote
1060417 (Black)
FREQUENCY RESPONSE
20Hz-20kHz
1060420 (White)
SENSITIVITY (1mW)
110dB
IMPEDANCE (1kHz)
32 ohms
INPUT CONNECTIONS
3.5mm
WEIGHT
200 g
COLORS
Black, White
SHIPPING WEIGHT: 1.25 lbs
R6i ON-EAR
DRIVER DESIGN
Dynamic 40mm Moving Coil
DRIVER COMPONENTS
Full Range KG-105
DRIVER DIAMETER
40 mm
MIC/REMOTE
mic+3-button remote
FREQUENCY RESPONSE
20Hz-20kHz
SENSITIVITY (1mW)
110dB
IMPEDANCE (1kHz)
32 ohms
INPUT CONNECTIONS
3.5mm
WEIGHT
160.3 g
COLORS
Black
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 1.21 lbs
PART NUMBER
1062410
R6 ON-EAR
DRIVER DESIGN
Dynamic 40mm Moving Coil
DRIVER COMPONENTS
Full Range KG-105
DRIVER DIAMETER
40 mm
FREQUENCY RESPONSE
20Hz-20kHz
SENSITIVITY (1mW)
110dB
IMPEDANCE (1kHz)
32 ohms
INPUT CONNECTIONS
3.5mm
WEIGHT
160.3 g
COLORS
Black
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: .79 lbs
PART NUMBER
1062411
26
KLIPSCH | BUYERS GUIDE SPRING 2016
HEADPHONES
REFERENCE SERIES
IN-EAR
R6i
SHIPPING QUANTITY: Single
DRIVER DESIGN
Dual Magnet, Dynamic Moving Coil Micro Speaker
DRIVER DIAMETER
6.5 mm
MIC/REMOTE
mic+3-button remote
FREQUENCY RESPONSE
10Hz-19kHz
1060400 (Black)
SENSITIVITY (1mW)
110dB
1060403 (White)
IMPEDANCE (1kHz)
18 ohms
NOISE ISOLATION
-22 dB
INPUT CONNECTIONS
3.5mm
WEIGHT
15.2 g
COLORS
Black, White
R6 BLUETOOTH®
SHIPPING WEIGHT: .22 lbs
PART NUMBER
NEW!
DRIVER DESIGN
KG-065 Dynamic Moving Coil Micro Speaker
DRIVER DIAMETER
6.5 mm
FREQUENCY RESPONSE
10Hz-19kHz
NOISE ISOLATION
-22 dB
WEIGHT
23.5 g
BATTERY
85 mAh
COLORS
Black
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: .66 lbs
PART NUMBER
1061151
REFERENCE X SERIES HEADPHONES
X6i
HIGH CLARITY
BALANCED ARMATURE
NEW!
Taking the next step from our legendary, award-winning R6i in-ear headphones,
the Klipsch Reference X6i in-ear headphones are packed with a single highclarity, full range balanced armature, offering flat frequency response with an
incredible fit.
SHIPPING WEIGHT: .48 lbs
PART NUMBER
1015195 (Black)
1062387 (White)
Hear all the nuance and detail without sacrificing long-term comfort.
27
SHIPPING QUANTITY: Single
DRIVER DESIGN
Full range balanced armature
DRIVER COMPONENTS
KG-723 Balanced Armature
MIC/REMOTE
mic+3-button remote
FREQUENCY RESPONSE
10Hz-19kHz
SENSITIVITY (1mW)
110dB
IMPEDANCE (1kHz)
50 ohms
NOISE ISOLATION
-26 dB
INPUT CONNECTIONS
3.5mm
WEIGHT
18 g
COLORS
Black, White
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
XR8i HYBRID
HIGH CLARITY
BALANCED ARMATURE
FULL BASS
DYNAMIC DRIVER
Combining the thundering, rich bass of R6i’s custom 6.5mm dual magnet
dynamic driver with the exceptional tonal balance and high frequency definition
of the KG-723 balanced armature, the Klipsch XR8i Hybrid In-Ear Headphones
deliver sound only paralleled by a home theater. Built with a true downwardfiring subwoofer, the XR8i makes no compromises.
DRIVER DESIGN
KG-2365 AcuPass(R) Two-Way Hybrid
DRIVER COMPONENTS
KG-723 Balanced Armature Tweeter, KG-065 Dynamic Woofer
MIC/REMOTE
mic+3-button remote
FREQUENCY RESPONSE
10Hz-20kHz
SENSITIVITY (1mW)
110dB
IMPEDANCE (1kHz)
50 ohms
NOISE ISOLATION
-26 dB
INPUT CONNECTIONS
3.5mm
WEIGHT
25 g
COLORS
Black
X12i
AUDIOPHILE
BALANCED ARMATURE
FEATHER-LIGHT
SMALL-SIZE
BALANCED ARMATURE
HIGH DEFINITION
SUPER TWEETER
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: .48 lbs
PART NUMBER
1062168
NEW!
With a milled aluminum chassis less than 6mm in diameter, the X12i is one of the
smallest headphones on the planet. Aided by the use of aluminum, not only is
the X12i incredibly durable, but it also becomes unnoticeable during wear due to
its diminutive weight.
DRIVER DESIGN
Full range balanced armature
DRIVER COMPONENTS
KG-926 Balanced Armature
MIC/REMOTE
mic+3-button remote
FREQUENCY RESPONSE
5Hz-20kHz
SENSITIVITY (1mW)
110dB
IMPEDANCE (1kHz)
50 ohms
NOISE ISOLATION
-26 dB
INPUT CONNECTIONS
3.5mm
WEIGHT
15 g
COLORS
Black
X20i
AUDIOPHILE
NEW!
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: .61 lbs
PART NUMBER
1062169
NEW!
X20i is the most revealing in-ear headphone Klipsch has ever made. High
frequencies are reproduced with unheard-of accuracy and bass is clear, full and
warm. Breaking all barriers, X20i sets a new standard in headphone acoustics.
Powered by a true two-way dual armature design, the high-horsepower KG-926T
woofer is mated to a high-resolution KG-125B super tweeter. This results in
a palpable sound character and makes X20i the broadest bandwidth in-ear
headphone available from Klipsch.
DRIVER DESIGN
KG-2625 AcuPass™ Two-Way
DRIVER COMPONENTS
KG-125B Balanced Armature Super Tweeter, KG-926T Balanced Armature Woofer
MIC/REMOTE
mic+3-button remote
FREQUENCY RESPONSE
5Hz-40kHz
SENSITIVITY (1mW)
111dB
IMPEDANCE (1kHz)
50 ohms
NOISE ISOLATION
-26 dB
INPUT CONNECTIONS
3.5mm
WEIGHT
22 g
COLORS
Black
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: .97 lbs
PART NUMBER
1062167
28
KLIPSCH | BUYERS GUIDE SPRING 2016
HEADPHONES
REFERENCE X SERIES
OVAL EAR TIPS
Klipsch in-ear headphones utilize patented contour ear gels that are anatomically designed to
accurately fit inside the human ear canal. These soft oval silicon tips reduce ear fatigue as well as
provide an amazing seal for excellent noise isolation and bass response.
Because ear canal measurements vary Klipsch headphones come with different washable ear gel sizes.
Such variety allows these earphones to fit more of the population than the competition.
OVAL EAR TIPS
PART NUMBER
• 4 PAIR PER PACKAGE
• AVAILABLE IN CLEAR ONLY
• CHOOSE FROM 5 SIZES FOR A CUSTOM FIT
• PATENTED DESIGN
1008371 (Large)
1008373 (Large Double Flange)
1008370 (Medium)
1008369 (Small)
1008372 (Small Double Flange)
29
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
30
KLIPSCH | BUYERS GUIDE SPRING 2016
PROFESSIONAL THX® SERIES
This extraordinary custom home theater series brings cinema-quality sound to the comforts of home by
using Klipsch’s renowned, professional-grade technology.
These THX Ultra2 and Select2 certified speakers expertly deliver the raw explosiveness and fine detail of any
film format and will shatter your expectations for home theater performance.
Our new edge-to-edge grille allows these in-wall and in-ceiling speakers to melt seamlessly into your
home theater.
IN-WALL
PRO-7800-L-THX
THX ULTRA2™
FREQUENCY RESPONSE
80Hz-23kHz +/- 3dB
SHIPPING QUANTITY: Single
SENSITIVITY
91dB @ 2.83V/1 meter
SHIPPING WEIGHT: 19.9 lbs
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2300Hz
PART NUMBER
1062256
POWER HANDLING (CONT/PEAK) 150W /600W
HIGH FREQUENCY DRIVER
1” (2.54cm) Titanium dome compression driver mated to 80° x 80° Tractrix Horn
LOW FREQUENCY DRIVER
8” (20cm) Aluminum Cone Woofer
DIMENSIONS
20.8” (52.7cm) H x 11.8” (29.8cm) W
MOUNTING DEPTH
3.7” (9.4cm)
CUTOUT DIMENSIONS
19” (48.3cm) H x 10” (25.4cm) W
WEIGHT
17.5 lbs. (7.9kg)
INSTALLATION KIT
IK-802-W (sold separately)
PRO-7800-S-THX
THX ULTRA2™
FREQUENCY RESPONSE
80Hz-20kHz +/- 3dB
SENSITIVITY
90dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2130Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 18.9 lbs
PART NUMBER
1062261
POWER HANDLING (CONT/PEAK) 100W /400W
HIGH FREQUENCY DRIVER
Two 1” (2.5cm) Titanium dome neodymium tweeters in a diffuse Tractrix horn array
LOW FREQUENCY DRIVER
8” (20cm) Aluminum Cone Woofer
DIMENSIONS
20.8” (52.7cm) H x 11.8” (29.8cm) W
MOUNTING DEPTH
3.7” (9.4cm)
CUTOUT DIMENSIONS
19” (48.3cm) H x 10” (25.4cm) W
WEIGHT
17.5 lbs. (7.9kg)
INSTALLATION KIT
IK-802-W (sold separately)
PRO-6504-L-THX
THX SELECT2™
FREQUENCY RESPONSE
46Hz-20kHz +/- 3dB
SENSITIVITY
92dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
250 Hz & 2100 Hz
POWER HANDLING (CONT/PEAK) 150W /600W
31
HIGH FREQUENCY DRIVER
1” (2.54cm) Titanium diaphragm compression driver
mated to 90° x 90° square Tractrix Horn
LOW FREQUENCY DRIVER
Four 5.25” (13.3cm) high-output, fiberglass cone woofers
DIMENSIONS
28.5” (72.4cm) H x 8” (20.3cm) W
MOUNTING DEPTH
3.75” (9.5cm)
CUTOUT DIMENSIONS
27.25” (69.2cm) H x 6.5” (16.5cm) W
WEIGHT
18.3 lbs (8.3kg)
INSTALLATION KIT
IK-504-W (sold separately)
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 19.9 lbs
PART NUMBER
1062259
ARCHITECTURAL SPEAKERS
PRO-6502-L-THX
PROFESSIONAL THX SERIES
THX SELECT2™
FREQUENCY RESPONSE
46Hz-20kHz +/- 3dB
SENSITIVITY
92dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2100Hz & 1200Hz
POWER HANDLING (CONT/PEAK) 100W /400W
HIGH FREQUENCY DRIVER
1” (2.54cm) Titanium diaphragm compression driver
mated to 90° x 90° square Tractrix Horn
LOW FREQUENCY DRIVER
Dual 5.25” (13.3cm) high-output, fiberglass cone woofers
DIMENSIONS
17.75” (45.1cm) H x 8” (20.3cm) W
MOUNTING DEPTH
3.75” (9.5cm)
CUTOUT DIMENSIONS
16.5” (41.9cm) H x 6.5” (16.5cm) W
WEIGHT
9.6 lbs (4.4kg)
INSTALLATION KIT
IK-502-W (sold separately)
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 11.9 lbs
PART NUMBER
1062260
IN-CEILING
PRO-7502-L-THX
THX ULTRA2™
FREQUENCY RESPONSE
45Hz-20kHz +/- 3dB
SENSITIVITY
93dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
1200 Hz & 1800 Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 15.9 lbs
PART NUMBER
1062257
POWER HANDLING (CONT/PEAK) 100W /400W
HIGH FREQUENCY DRIVER
1” (2.5cm) Titanium tweeter in a 7.5 x 3.75” 60-90-110 VCT 45° Skewed horn
LOW FREQUENCY DRIVER
Two 5.25” (16.51cm) Cerametallic Woofers
DIMENSIONS
Ø15.25” (38.7cm)
MOUNTING DEPTH
9.5” (24.1cm)
CUTOUT DIMENSIONS
Ø13.25” (33.7cm)
WEIGHT
12 lbs (5.4kg)
INSTALLATION KIT
IK-502-C (sold separately)
PRO-7502-S-THX
THX ULTRA2™
FREQUENCY RESPONSE
45Hz-20kHz +/- 3dB
SENSITIVITY
93dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2500Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 13.9 lbs
PART NUMBER
1062258
POWER HANDLING (CONT/PEAK) 100W /400W
HIGH FREQUENCY DRIVER
Two 1” Titanium tweeters in vertically stacked Tractrix horns
LOW FREQUENCY DRIVER
Two 5.25” (16.51cm) Cerametallic Woofers
DIMENSIONS
Ø15.25” (38.7cm)
MOUNTING DEPTH
9.5” (24.1cm)
CUTOUT DIMENSIONS
Ø13.25” (33.7cm)
WEIGHT
11 lbs. (5.0kg)
INSTALLATION KIT
IK-502-C (sold separately)
32
KLIPSCH | BUYERS GUIDE SPRING 2016
REFERENCE SERIES
Creating a benchmark in architectural audio excellence, the installer-friendly Reference Series
architectural products deliver a level of realism and subtlety that surpasses and even intimidates
competing designs.
Heard but not seen, our speakers will blend seamlessly into any environment without compromising the
legendary Klipsch sound.
IN-WALL
R-5800-W II
5000 SERIES
FREQUENCY RESPONSE
40Hz-23kHz +/- 3dB
SENSITIVITY
94dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2600Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 9 lbs
PART NUMBER
1014135
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
1” (2.54cm) Titanium dome compression driver mated to a
90° x 60° pivoting Tractrix Horn
LOW FREQUENCY DRIVER
8” (20.32cm) Cerametallic cone woofer
DIMENSIONS
16.1” (40.9cm) H x 10.6” (26.9cm) W
MOUNTING DEPTH
3.75” (9.5cm)
CUTOUT DIMENSIONS
14.75” (37.47cm) H x 9.25” (23.50cm) W
WEIGHT
7.9 lbs (3.6kg)
INSTALLATION KIT
IK-800-W (sold separately)
R-5650-W II
5000 SERIES
FREQUENCY RESPONSE
52Hz-23KHz +/- 3dB
SENSITIVITY
93dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2500Hz
POWER HANDLING (CONT/PEAK) 50W /200W
33
HIGH FREQUENCY DRIVER
1” (2.54cm) Titanium dome compression driver mated to a
90° x 60° pivoting Tractrix Horn
LOW FREQUENCY DRIVER
6.5” (16.51cm) Cerametallic cone woofer
DIMENSIONS
14.3” (36.32cm) H x 9.3” (23.62cm) W
MOUNTING DEPTH
3.75” (9.5cm)
CUTOUT DIMENSIONS
13” (33.02cm) H x 8” (20.32cm) W
WEIGHT
7.2 lbs (3.25kg)
INSTALLATION KIT
IK-650-W (sold separately)
FIRE RATED ENCLOSURE
ME-650-W (sold separately)
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 8 lbs
PART NUMBER
1014133
ARCHITECTURAL SPEAKERS
REFERENCE SERIES
R-5502-W II
5000 SERIES
FREQUENCY RESPONSE
46Hz-20KHz +/- 3dB
SENSITIVITY
92dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
PART NUMBER
CROSSOVER FREQUENCY
2200Hz and 1300Hz
1014132
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 10 lbs
POWER HANDLING (CONT/PEAK) 75W /300W
HIGH FREQUENCY DRIVER
1” (2.54cm) Titanium dome compression driver mated to a
90° x 90° pivoting Tractrix Horn
LOW FREQUENCY DRIVER
Dual 5.25” (16.51cm) Cerametallic cone woofers
DIMENSIONS
17.75” (45.09cm) H x 8” (20.32cm) W
CUTOUT DIMENSIONS
16.5” (41.91cm) H x 6.5” (16.51cm) W
MOUNTING DEPTH
3.5” (8.89cm)
WEIGHT
6.5 lbs (2.95kg)
INSTALLATION KIT
IK-502-W (sold separately)
R-5650-S II
5000 SERIES
FREQUENCY RESPONSE
60Hz-23KHz +/- 3dB
SENSITIVITY
92dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
3400Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 8 lbs
PART NUMBER
1014134
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
Dual 1” (2.54cm) Titanium dome compression drivers mated
to a dual Tractrix Horn array for surround sound
LOW FREQUENCY DRIVER
6.5” (16.51cm) Cerametallic™ cone woofer
DIMENSIONS
14.3” (36.32cm) H x 9.3” (23.62cm) W
CUTOUT DIMENSIONS
13” H (33.02cm) H x 8” (20.32cm) W
MOUNTING DEPTH
3.75” (9.5cm)
WEIGHT
7.2 lbs (3.25kg)
INSTALLATION KIT
IK-650-W (sold separately)
FIRE RATED ENCLOSURE
ME-650-W (sold separately)
R-3800-W II
3000 SERIES
FREQUENCY RESPONSE
46Hz-20kHz +/- 3dB
SENSITIVITY
93dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2200Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 9 lbs
PART NUMBER
1014131
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
1” (2.5cm) titanium dome compression tweeter with
a swiveling 90ºx 60º Tractrix Horn
LOW FREQUENCY DRIVER
8” (20.32cm) IMG cone woofer
DIMENSIONS
16.1” (40.9cm) H x 10.6” (26.9cm) W
MOUNTING DEPTH
3.75” (9.5cm)
CUTOUT DIMENSIONS
14.8” (37.6cm) H x 9.3” (23.6cm) W
WEIGHT
7.9 lbs (3.58kg)
INSTALLATION KIT
IK-800-W (sold separately)
34
KLIPSCH | BUYERS GUIDE SPRING 2016
ARCHITECTURAL SPEAKERS
R-3650-W II
3000 SERIES
FREQUENCY RESPONSE
60Hz-23KHz +/- 3dB
SENSITIVITY
92dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2200Hz
REFERENCE SERIES
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 8 lbs
PART NUMBER
1014130
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
1” (2.5cm) titanium dome compression tweeter with
a swiveling 90ºx 60º Tractrix Horn
LOW FREQUENCY DRIVER
6.5” (16.51cm) IMG cone woofer
DIMENSIONS
14.3” (36.32cm) H x 9.3” (23.62cm) W
MOUNTING DEPTH
3.75” (9.5cm)
CUTOUT DIMENSIONS
13” (33.02cm) H x 8” (20.32cm) W
WEIGHT
7.2 lbs (3.25kg)
INSTALLATION KIT
IK-650-W (sold separately)
FIRE RATED ENCLOSURE
ME-650-W (sold separately)
R-2502-W II
2000 SERIES
FREQUENCY RESPONSE
47Hz-20kHz +/- 3dB
SENSITIVITY
91dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2200Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 9 lbs
PART NUMBER
1014128
POWER HANDLING (CONT/PEAK) 60W /240W
HIGH FREQUENCY DRIVER
1” (2.5cm) silk dome tweeter
LOW FREQUENCY DRIVER
Dual 5.25” (13.34cm) Polypropylene cone woofers
DIMENSIONS
17.75” (45.09cm) H x 8” (20.32cm) W
MOUNTING DEPTH
3.5” (8.89cm)
CUTOUT DIMENSIONS
16.5” (41.91cm) H x 6.5” (16.51cm) W
WEIGHT
6.25 lbs. (2.83kg)
INSTALLATION KIT
IK-502-W (sold separately)
R-2650-W II
2000 SERIES
FREQUENCY RESPONSE
65Hz-20KHz +/- 3dB
SENSITIVITY
91dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
1800Hz
POWER HANDLING (CONT/PEAK) 50W /200W
35
HIGH FREQUENCY DRIVER
1” (2.5cm) silk dome tweeter
LOW FREQUENCY DRIVER
6.5” (16.51cm) Polypropylene cone woofer
DIMENSIONS
14.3” (36.32cm) H x 9.3” (23.62cm) W
MOUNTING DEPTH
3.75” (9.5cm)
CUTOUT DIMENSIONS
13” (33.02cm) H x 8” (20.32cm) W
WEIGHT
7.2 lbs (3.25kg)
INSTALLATION KIT
IK-650-W (sold separately)
FIRE RATED ENCLOSURE
ME-650-W (sold separately)
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 8 lbs
PART NUMBER
1014129
R-1650-W
1000 SERIES
FREQUENCY RESPONSE
53Hz-20kHz +/- 3dB
SENSITIVITY
88dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
1800Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 7.5 lbs
PART NUMBER
1007212
POWER HANDLING (CONT/PEAK) 30W /120W
HIGH FREQUENCY DRIVER
1” (2.5cm) polymer dome tweeter
LOW FREQUENCY DRIVER
6.5” (16.5cm) aluminum cone woofer
DIMENSIONS
14.3” (36.3cm) H x 9.3” (23.6cm) W
MOUNTING DEPTH
3.75” (9.5cm)
CUTOUT DIMENSIONS
13” (33.02cm) H x 8” (20.32cm) W
WEIGHT
6.5 lbs (3 kg)
INSTALLATION KIT
IK-650-W (sold separately)
IN-CEILING
CDT-5800-C II
5000 SERIES
FREQUENCY RESPONSE
49Hz-23KHz +/- 3dB
SENSITIVITY
95dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2230Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 8.5 lbs
PART NUMBER
1014144
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
1” (2.5cm) titanium dome compression tweeter with a swiveling 100° Tractrix Horn
LOW FREQUENCY DRIVER
8” (20.32cm) pivoting Cerametallic cone woofer
DIAMETER
11” (27.94cm)
CUTOUT DIAMETER
9.8” (24.89cm)
MOUNTING DEPTH
5.4” (13.72cm)
WEIGHT
7.4 lbs (3.36kg)
INSTALLATION KIT
IK-800-C (sold separately)
FIRE RATED ENCLOSURE
ME-800-C (sold separately)
CDT-5650-C II
5000 SERIES
FREQUENCY RESPONSE
60Hz-23KHz +/- 3dB
SENSITIVITY
94dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2440Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 8 lbs
PART NUMBER
1014143
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
1” (2.5cm) titanium dome compression tweeter with a swiveling 100° Tractrix Horn
LOW FREQUENCY DRIVER
6.5” (16.51cm) pivoting Cerametallic cone woofer
DIAMETER
9.5” (24.13cm)
CUTOUT DIAMETER
8.3” (21.08cm)
MOUNTING DEPTH
4.5” (13.72cm)
WEIGHT
7 lbs (3.18kg)
INSTALLATION KIT
IK-650-C (sold separately)
FIRE RATED ENCLOSURE
ME-650-C (sold separately)
36
KLIPSCH | BUYERS GUIDE SPRING 2016
CDT-3800-C II
ARCHITECTURAL SPEAKERS
REFERENCE SERIES
3000 SERIES
FREQUENCY RESPONSE
56Hz-23KHz +/- 3dB
SENSITIVITY
92dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
3455Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 8.4 lbs
PART NUMBER
1014142
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
1” (2.5cm) aluminum dome compression tweeter with a swiveling Tractrix Horn
LOW FREQUENCY DRIVER
8” (20.32cm) pivoting IMG cone woofer
DIAMETER
11” (27.94cm)
CUTOUT DIAMETER
9.8” (24.89cm)
MOUNTING DEPTH
5.4” (13.72cm)
WEIGHT
7.3 lbs. (3.31kg)
INSTALLATION KIT
IK-800-C (sold separately)
FIRE RATED ENCLOSURE
ME-800-C (sold separately)
CDT-3650-C II
3000 SERIES
FREQUENCY RESPONSE
63Hz-23KHz +/- 3dB
SENSITIVITY
93dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2800Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 8 lbs
PART NUMBER
1014141
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
1” (2.5cm) aluminum dome compression tweeter with a swiveling Tractrix Horn
LOW FREQUENCY DRIVER
6.5” (16.51cm) pivoting IMG cone woofer
DIAMETER
9.5” (24.13cm)
CUTOUT DIAMETER
8.3” (21.08cm)
MOUNTING DEPTH
4.5” (13.72cm)
WEIGHT
6.8 lbs (3.08kg)
INSTALLATION KIT
IK-650-C (sold separately)
FIRE RATED ENCLOSURE
ME-650-C (sold separately)
CDT-2800-C II
2000 SERIES
FREQUENCY RESPONSE
65Hz-20KHz +/- 3dB
SENSITIVITY
93dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2177Hz
POWER HANDLING (CONT/PEAK) 50W /200W
37
HIGH FREQUENCY DRIVER
1” (2.5cm) silk dome tweeter with a swiveling 100º Tractrix Horn
LOW FREQUENCY DRIVER
8” (20.3cm) pivoting poly woofer
DIAMETER
11” (27.9cm)
CUTOUT DIAMETER
9.8” (24.9cm)
MOUNTING DEPTH
5.4” (13.7cm)
WEIGHT
7.1 lbs. (3.2 kg)
INSTALLATION KIT
IK-800-C (sold separately)
FIRE RATED ENCLOSURE
ME-800-C (sold separately)
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 8.2 lbs
PART NUMBER
1014140
CDT-2650-C II
2000 SERIES
FREQUENCY RESPONSE
77Hz-20KHz +/- 3dB
SENSITIVITY
91dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
3070Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 7.8 lbs
PART NUMBER
1014139
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
1” (2.5cm) aluminum dome compression tweeter with a swiveling Tractrix Horn
LOW FREQUENCY DRIVER
6.5” (16.51cm) pivoting Polypropylene cone woofer
DIAMETER
9.5” (24.13cm)
CUTOUT DIAMETER
8.3” (21.08cm)
MOUNTING DEPTH
4.5” (13.72cm)
WEIGHT
6.6 lbs. (2.99kg)
INSTALLATION KIT
IK-650-C (sold separately)
FIRE RATED ENCLOSURE
ME-650-C (sold separately)
R-2800-CSM II
2000 SERIES
FREQUENCY RESPONSE
52Hz-20KHz +/- 3dB
SENSITIVITY
94dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
3400Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 8.5 lbs
PART NUMBER
1014138
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
Dual .75” (1.9cm) silk dome tweeters
LOW FREQUENCY DRIVER
8” (20.32cm) Polypropylene cone dual voicecoil woofer
DIAMETER
11” (27.9cm)
CUTOUT DIAMETER
9.75” (24.77cm)
MOUNTING DEPTH
4.5” (11.43cm)
WEIGHT
7.9 lbs. (3.58kg)
INSTALLATION KIT
IK-800-C (sold separately)
FIRE RATED ENCLOSURE
ME-800-C (sold separately)
R-2650-C II
2000 SERIES
FREQUENCY RESPONSE
77Hz-20KHz +/- 3dB
SENSITIVITY
91dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2700Hz
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 8 lbs
PART NUMBER
1014136
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
1” (2.5cm) silk dome tweeter
LOW FREQUENCY DRIVER
6.5” (16.51cm) pivoting Polypropylene cone woofer
DIAMETER
9.5” (24.13cm)
CUTOUT DIAMETER
8.3” (21.08cm)
MOUNTING DEPTH
4.5” (13.72cm)
WEIGHT
7.2 lbs (3.25 kg)
INSTALLATION KIT
IK-650-C (sold separately)
FIRE RATED ENCLOSURE
ME-650-C (sold separately)
38
KLIPSCH | BUYERS GUIDE SPRING 2016
ARCHITECTURAL SPEAKERS
R-2650-CSM II
2000 SERIES
FREQUENCY RESPONSE
75Hz-20KHz +/- 3dB
SENSITIVITY
94dB @ 2.83V/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
3000Hz
POWER HANDLING (CONT/PEAK) 50W /200W
39
REFERENCE SERIES
HIGH FREQUENCY DRIVER
Dual .75” (1.9cm) silk dome tweeters
LOW FREQUENCY DRIVER
6.5” (16.51cm) Polypropylene cone dual voicecoil woofer
DIAMETER
9.5” (24.13cm)
CUTOUT DIAMETER
8.25” (20.96cm)
MOUNTING DEPTH
4.2” (10.67cm)
WEIGHT
7.2 lbs (3.25 kg)
INSTALLATION KIT
IK-650-C (sold separately)
FIRE RATED ENCLOSURE
ME-650-C (sold separately)
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 10 lbs
PART NUMBER
1014137
40
KLIPSCH | BUYERS GUIDE SPRING 2016
COMPACT PERFORMANCE SERIES
The Klipsch Compact Performance Series is designed for high-performance sound indoors or out. Both
models, in paintable Black or White, are designed to quickly wall-mount with their included brackets or
rest on a shelf or bookcase in equally appealing form.
Traditional Klipsch lifelike sound with Tractrix horns, utilize them for deck or patio sound, as part of a
2-channel music system or as surrounds in a Home Theater system. Their versatility is endless.
CP-6
FREQUENCY RESPONSE
70Hz-22KHz +/- 3dB
SENSITIVITY
94dB @ 1 watt/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
3000Hz
POWER HANDLING (CONT/PEAK) 75W /300W
HIGH FREQUENCY DRIVER
.75” (1.9cm) aluminum dome tweeter with a 90° x 90° Tractrix Horn
LOW FREQUENCY DRIVER
5.25” (13.3cm) long-throw IMG woofer
TERMINALS
Front baffle mounted accessed via rear pull-through
DIMENSIONS
11.0”(27.9cm) H x 7.0”(17.8cm) W x 6.1”(15.5cm) D
MOUNTING DEPTH
6.9”(17.5cm) D
WEIGHT
5.8 lbs (2.6kg)
FINISH
Black or White enclosure and grille
SHIPPING QUANTITY:
Pair
SHIPPING WEIGHT: 17.19 lbs
PART NUMBER
1016297 (Black)
1060387 (White)
CP-4
FREQUENCY RESPONSE
80Hz-22KHz +/- 3dB
SENSITIVITY
91dB @ 1 watt/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
3200Hz
POWER HANDLING (CONT/PEAK) 50W /200W
41
HIGH FREQUENCY DRIVER
.75” (1.9cm) aluminum dome tweeter with a 90° x 90° Tractrix Horn
LOW FREQUENCY DRIVER
3.5” (8.9cm) long-throw IMG woofer
TERMINALS
Front baffle mounted accessed via rear pull-through
DIMENSIONS
8.8”(22.4cm) H x 5.5”(14.0cm) W x 4.7”(11.9cm) D
MOUNTING DEPTH
5.5”(14.0cm) D
WEIGHT
4.8 lbs. (2.2kg)
FINISH
Black or White enclosure and grille
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
SHIPPING QUANTITY:
Pair
SHIPPING WEIGHT: 17.19 lbs
PART NUMBER
1016297 (Black)
1060387 (White)
OUTDOOR SPEAKERS
CP SERIES / AW SERIES
ALL-WEATHER SERIES
When you want to listen to your favorite music by the pool or want to provide background music while
you entertain guests on your patio, our line of outdoor speakers has you covered. The Klipsch All-Weather
loudspeaker line delivers clear, dynamic performances while providing more sound per watt than
comparably sized speakers, allowing for better sound coverage in a smaller package.
FULL-RANGE
AW-650
FREQUENCY RESPONSE
70Hz-20KHz +/- 3dB
SENSITIVITY
95dB @ 1 watt/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
3400Hz
POWER HANDLING (CONT/PEAK) 75W /300W
HIGH FREQUENCY DRIVER
1” (2.5 cm) titanium dome tweeter with a 90° x 90° Tractrix Horn
LOW FREQUENCY DRIVER
6.5” (16.5cm) IMG woofer
DIMENSIONS
15” (38.1cm) H x 9.5” (21.4cm) W x 11” (27.9) cm) D
WEIGHT
9 lbs (4.1 kg)
FINISH
Black or White enclosure and grille
SHIPPING QUANTITY:
Pair
SHIPPING WEIGHT: 26 lbs
PART NUMBER
1009316 (Black)
097093000001 (White)
AW-525
FREQUENCY RESPONSE
80Hz-20KHz +/- 3dB
SENSITIVITY
94dB @ 1 watt/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2450Hz
POWER HANDLING (CONT/PEAK) 75W /300W
HIGH FREQUENCY DRIVER
1” (2.5 cm) titanium dome tweeter with a 90° x 90° Tractrix Horn
LOW FREQUENCY DRIVER
5.25” (13.3cm) IMG woofer
DIMENSIONS
11.8” (30cm) H x 8” (20.3cm) W x 9” (22.9 cm) D
WEIGHT
6.5 lbs (3kg)
FINISH
Black or White enclosure and grille
SHIPPING QUANTITY:
Pair
SHIPPING WEIGHT: 18 lbs
PART NUMBER
1009313 (Black)
097090000001 (White)
AW-500
FREQUENCY RESPONSE
95Hz-20KHz +/- 3dB
SENSITIVITY
92dB @ 1 watt/1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2600Hz
POWER HANDLING (CONT/PEAK) 65W /260W
HIGH FREQUENCY DRIVER
1” (2.5 cm) titanium dome tweeter with a 90° x 90° Tractrix Horn
LOW FREQUENCY DRIVER
5” (12.7cm) IMG woofer
DIMENSIONS
11.8” (30cm) H x 8” (20.3cm) W x 9” (22.9) cm) D
WEIGHT
6 lbs (2.7 kg)
FINISH
White enclosure and grille
SHIPPING QUANTITY:
Pair
SHIPPING WEIGHT: 16.4 lbs
PART NUMBER
097087000001
ROCK SPEAKERS
AWR-650-SM
FREQUENCY RESPONSE
66Hz-20KHz +/- 3dB
SENSITIVITY
94dB @ 2.83V / 1 meter
IMPEDANCE
8 ohms compatible
CROSSOVER FREQUENCY
2500Hz
POWER HANDLING (CONT/PEAK) 50W /200W
HIGH FREQUENCY DRIVER
Two .75” (1.9cm) polymer dome tweeters
LOW FREQUENCY DRIVER
6.5” (16.5cm) polymer cone dual voice coil woofer
DIMENSIONS
17” (43.2cm) H x 15” (38.1cm) W x 11” (27.9cm) D
WEIGHT
13 lbs (5.9kg)
FINISH
Granite or Sandstone
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 16 lbs
PART NUMBER
1007160 (Granite)
1007161 (Sandstone)
42
KLIPSCH | BUYERS GUIDE SPRING 2016
3502 WOODVIEW TRACE, INDIANAPOLIS, IN, USA
KLIPSCH.COM
©2016 KLIPSCH GROUP, INC. KLIPSCH, KEEPERS ON THE SOUND, TRACTRIX, KLIPSCH GALLERY, AND GROOVE ARE TRADEMARKS OF KLIPSCH GROUP, INC. REGISTERED IN THE U.S. AND OTHER COUNTRIES. A WHOLLY OWNED
SUBSIDIARY OF VOXX INTERNATIONAL CORPORATION. THE BLUETOOTH ® WORD MARK AND LOGOS ARE REGISTERED TRADEMARKS OWNED BY BLUETOOTH SIG, INC. AND ANY USE OF SUCH MARKS BY KLIPSCH GROUP, INC. IS UNDER LICENSE.
THE APTXTM SOFTWARE IS COPYRIGHT CSR PLC OR ITS GROUP COMPANIES. ALL RIGHTS RESERVED. THE APTXTM MARK IS A TRADEMARK OF CSR PLC OR ONE OF ITS COMPANIES AND MAY BE REGISTERED IN ONE OR MORE JURISDICTIONS.
THE TERMS HDMI AND HDMI HIGH-DEFINITION MULTIMEDIA INTERFACE, AND THE HDMI LOGO ARE TRADEMARKS OR REGISTERED TRADEMARKS OF HDMI LICENSING LLC IN THE UNITED STATES AND OTHER COUNTRIES.
DOLBY, PRO LOGIC, ATMOS AND THE DOUBLE-D SYMBOL ARE REGISTERED ARE REGISTERED TRADEMARKS OF DOLBY LABORATORIES. FOR DTS PATENTS, SEE HTTP://PATENTS.DTS.COM. MANUFACTURED UNDER LICENSE
FROM DTS LICENSING LIMITED. DTS, THE SYMBOL, & DTS AND THE SYMBOL TOGETHER ARE REGISTERED TRADEMARKS, AND DTS DIGITAL SURROUND IS A TRADEMARK OF DTS, INC. © DTS, INC. ALL RIGHTS RESERVED
V01 - 0406
43
FOR THE LASTEST SPECS AND PRICES VISIT K LIPSC H.CO M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement