How do I scan the channels on my LG TV? Before you begin • Some steps on your TV may differ from the steps shown below. • Do not insert your CI+ module into your TV until after you have scanned the channels! • If you are asked to enter a PIN code and have forgotten it, try one of the default PIN codes: 0000, 1111 or 1234. Scan the channels 1. Press the Menu button on your remote control. 2. Select Setup and press OK on your remote control. 3. Select Automatic tuning and press OK on your remote control. 4. Select Cable and press OK on your remote control. Attention: do not press Close. 5. Select Other operators and press OK on your remote control. 6. Enter the following values: - Frequency: 322000 - Symbol rate: 6875 - Modulation: 256QAM - Network ID: the code for your region (22 for Flanders and 12 for Brussels) 7. Select OK on the TV screen and press OK on your remote control. 8. Select Start and press OK on your remote control. 9. Your TV now scans the channels Attention: do not press Next (Cable TV) while the channels are being scanned. 10. Channel scanning is complete once you see the message: Auto tuning complete. - Now choose Close. - Press OK and then press the Back button on your remote control. Now continue with steps 4, 5 and 6 in the ‘TV with a card’ manual.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project