Amazon Web Services AWS Database Migration Service User Guide
Reklama
Reklama
AWS Database Migration Service
User Guide
API Version API Version 2016-01-01
AWS Database Migration Service User Guide
AWS Database Migration Service: User Guide
Copyright © 2017 Amazon Web Services, Inc. and/or its affiliates. All rights reserved.
Amazon's trademarks and trade dress may not be used in connection with any product or service that is not Amazon's, in any manner that is likely to cause confusion among customers, or in any manner that disparages or discredits Amazon. All other trademarks not owned by Amazon are the property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by
Amazon.
AWS Database Migration Service User Guide
Table of Contents
API Version API Version 2016-01-01 iii
AWS Database Migration Service User Guide
Configuring a Microsoft SQL Server Database as a Replication Source for AWS Database
Prerequisites When Using MongoDB as a Source for AWS Database Migration Service ................ 91
Prerequisites When Using CDC with MongoDB as a Source for AWS Database Migration Service ... 91
Security Requirements When Using MongoDB as a Source for AWS Database Migration Service ... 92
Limitations When Using MongoDB as a Source for AWS Database Migration Service ................... 92
Configuration Properties When Using MongoDB as a Source for AWS Database Migration
Security Requirements When Using SQL Server as a Target for AWS Database Migration Service .. 98
API Version API Version 2016-01-01 iv
AWS Database Migration Service User Guide
Prerequisites for Using an Amazon Redshift Database as a Target for AWS Database Migration
Configuring an Amazon Redshift Database as a Target for AWS Database Migration Service ...... 102
Using Enhanced VPC Routing with an Amazon Redshift as a Target for AWS Database Migration
API Version API Version 2016-01-01 v
AWS Database Migration Service User Guide
Error: Oracle CDC stopped 122301 Oracle CDC maximum retry counter exceeded. ................... 166
CDC Task Failing for Amazon RDS DB Instance Endpoint Because Binary Logging Disabled ........ 168
Loading into a Amazon Redshift Cluster in a Different Region Than the AWS DMS Replication
Seeing Tables in Cluster with Names Like dms.awsdms_changes000000000XXXX .................... 174
API Version API Version 2016-01-01 vi
AWS Database Migration Service User Guide
API Version API Version 2016-01-01 vii
AWS Database Migration Service User Guide
What Is AWS Database Migration
Service?
AWS Database Migration Service (AWS DMS) can migrate your data to and from most widely used commercial and open-source databases such as Oracle, PostgreSQL, Microsoft SQL Server, Amazon
Redshift, Amazon Aurora, Amazon DynamoDB, Amazon S3, MariaDB, and MySQL. The service supports homogeneous migrations such as Oracle to Oracle, and also heterogeneous migrations between different database platforms, such as Oracle to MySQL or MySQL to Amazon Aurora. The source or target database must be on an AWS service.
To perform a database migration, AWS DMS connects to the source database, reads the source data, formats the data for consumption by the target database, and loads the data into the target database.
Most of this processing happens in memory, though large transactions might require some buffering to disk. Cached transactions and log files are also written to disk.
AWS DMS creates the target schema objects necessary to perform the migration. However, AWS DMS takes a minimalist approach and creates only those objects required to efficiently migrate the data. In other words, AWS DMS creates tables, primary keys, and in some cases unique indexes, but it doesn't create any other objects that are not required to efficiently migrate the data from the source. For example, it doesn't create secondary indexes, non-primary key constraints, or data defaults.
In most cases, when performing a migration, you will also want to migrate most or all of the source schema. If you are performing a homogeneous migration (between two databases of the same engine type), you migrate the schema by using your engine’s native tools to export and import the schema itself, without any data. If your migration is heterogeneous (between two databases that use different engine types), you can use the AWS Schema Conversion Tool to generate a complete target schema for you. If you use the tool, any dependencies between tables such as foreign key constraints need to be disabled during the migration's “full load” and “cached change apply” phases. If performance is an issue, removing or disabling secondary indexes during the migration process will help. For more information on the AWS Schema Conversion Tool, see AWS Schema Conversion Tool .
For information on the cost of database migration, go to the AWS Database Migration Service pricing page .
AWS DMS is currently available in the following regions:
Region
Asia Pacific (Tokyo) Region
Name
ap-northeast-1
API Version API Version 2016-01-01
1
AWS Database Migration Service User Guide
Migration Planning
Region
Asia Pacific (Seoul) Region
Asia Pacific (Mumbai) Region
Asia Pacific (Singapore) Region
Asia Pacific (Sydney) Region
Canada (Central) Region
EU (Frankfurt) Region
EU (Ireland) Region
EU (London) Region
South America (São Paulo) Region
US East (N. Virginia) Region
US East (Ohio) Region
US West (N. California) Region
US West (Oregon) Region
Name
ap-northeast-2 ap-south-1 ap-southeast-1 ap-southeast-2 ca-central-1 eu-central-1 eu-west-1 eu-west-2 sa-east-1 us-east-1 us-east-2 us-west-1 us-west-2
Migration Planning for AWS Database Migration
Service
When planning a database migration using AWS Database Migration Service, consider the following:
• You will need to configure a network that connects your source and target databases to a AWS DMS replication instance. This can be as simple as connecting two AWS resources in the same VPC as the replication instance to more complex configurations such as connecting an on-premises database to an
Amazon RDS DB instance over VPN. For more information, see Network Configurations for Database
• Source and Target Endpoints – You will need to know what information and tables in the source database need to be migrated to the target database. AWS DMS supports basic schema migration, including the creation of tables and primary keys. However, AWS DMS doesn't automatically create secondary indexes, foreign keys, user accounts, and so on in the target database. Note that, depending on your source and target database engine, you may need to set up supplemental logging or modify other settings for a source or target database. See the
Sources for Data Migration (p. 67) and
Targets for Data Migration (p. 94)
sections for more information.
• Schema/Code Migration – AWS DMS doesn't perform schema or code conversion. You can use tools such as Oracle SQL Developer, MySQL Workbench, or pgAdmin III to convert your schema. If you want to convert an existing schema to a different database engine, you can use the AWS Schema Conversion
Tool. It can create a target schema and also can generate and create an entire schema: tables, indexes, views, and so on. You can also use the tool to convert PL/SQL or TSQL to PgSQL and other formats.
For more information on the AWS Schema Conversion Tool, see AWS Schema Conversion Tool .
• Unsupported Data Types – Some source data types need to be converted into the parallel data types
AWS Database Migration Service Including Data Conversion Reference and Additional Topics (p. 176) .
API Version API Version 2016-01-01
2
AWS Database Migration Service User Guide
Migration: A High-Level View
Introduction to AWS DMS
AWS Database Migration Service (AWS DMS) is a web service that you can use to migrate data from a source database to a target database. To work with AWS DMS, one of your databases must be on an AWS service. You can't migrate from an on-premises database to another on-premises database.
Migration: A High-Level View
To perform a database migration, AWS DMS connects to the source database, reads the source data, formats the data for consumption by the target database, and loads the data into the target database.
Most of this processing happens in memory, though large transactions might require some buffering to disk. Cached transactions and log files are also written to disk.
At a high level, when using AWS DMS, you do the following:
• Provision a replication server
• Define source and target endpoints (databases)
• Create one or more tasks to migrate data between the source and target databases.
A typical task consists of three major phases:
• The full load of existing data
• The application of cached changes
• Ongoing replication
During the full load, AWS DMS loads data from tables on the source database to tables on the target database, eight tables at a time. While the full load is in progress, any changes made to the tables being loaded are cached on the replication server; these are the cached changes. It’s important to note that change capture for a given table doesn't begin until the full load for that table is started. In other words, the point when change capture starts will be different for each individual table.
When the full load for a given table is complete, AWS DMS immediately begins to apply the cached changes for that table. When all tables have been loaded, AWS DMS begins to collect changes as transactions for the ongoing replication phase. After AWS DMS applies all cached changes, tables are
API Version API Version 2016-01-01
3
AWS Database Migration Service User Guide
AWS DMS Components transactionally consistent. At this point, AWS DMS moves to the ongoing replication phase, applying changes as transactions.
At the start of the ongoing replication phase, a backlog of transactions generally causes some lag between the source and target databases. The migration eventually reaches a steady state after working through this backlog of transactions. At this point, you can shut down your applications, allow any remaining transactions to be applied to the target, and bring your applications up, now pointing at the target database.
AWS DMS creates the target schema objects necessary to perform the migration. However, AWS DMS takes a minimalist approach and creates only those objects required to efficiently migrate the data. In other words, AWS DMS creates tables, primary keys, and in some cases unique indexes, but it doesn't create any other objects that are not required to efficiently migrate the data from the source. For example, it doesn't create secondary indexes, non-primary key constraints, or data defaults.
In most cases, when performing a migration, you will also want to migrate most or all of the source schema. If you are performing a homogeneous migration (between two databases of the same engine type), you migrate the schema by using your engine’s native tools to export and import the schema itself, without any data. If your migration is heterogeneous (between two databases that use different engine types), you can use the AWS Schema Conversion Tool to generate a complete target schema for you. If you use the tool, any dependencies between tables such as foreign key constraints need to be disabled during the migration's “full load” and “cached change apply” phases. If performance is an issue, removing or disabling secondary indexes during the migration process will help. For more information on the AWS Schema Conversion Tool, see AWS Schema Conversion Tool .
AWS DMS Components
The components you work with when using AWS DMS include the following:
Replication instance
The AWS DMS replication instance runs on an Amazon Elastic Compute Cloud (Amazon EC2) instance. The replication instance provides high-availability and failover support using a Multi-
AZ deployment. In a Multi-AZ deployment, AWS DMS automatically provisions and maintains a synchronous standby replica of the replication instance in a different Availability Zone. The primary replication instance is synchronously replicated across Availability Zones to a standby replica. This approach provides data redundancy, eliminate I/O freezes, and minimize latency spikes during system backups.
AWS DMS uses a replication server that connects to the source database, reads the source data, formats the data for consumption by the target database, and loads the data into the target database. Most of this processing happens in memory. However, large transactions might require some buffering on disk. Cached transactions and log files are also written to disk. When creating your replication server, you should consider the following:
• EC2 instance class — Some of the smaller EC2 instance classes are sufficient for testing the service or for small migrations. If your migration involves a large number of tables, or if you intend to run multiple concurrent replication tasks, you should consider using one of the larger instances. We recommend this approach because AWS DMS consumes a fair amount of memory and CPU.
• Storage — Depending on the EC2 instance class you select, your replication server comes with either 50 GB or 100 GB of data storage. This storage is used for log files and any cached changes collected during the load. If your source system is busy or takes large transactions, or if you’re running multiple tasks on the replication server, you might need to increase this amount of storage. Usually the default amount is sufficient.
Source endpoint
The change capture process that AWS DMS uses when replicating ongoing changes from a source endpoint collects changes to the database logs by using the database engine's native API. Each
API Version API Version 2016-01-01
4
AWS Database Migration Service User Guide
Sources source engine has specific configuration requirements for exposing this change stream to a given user account. Most engines require some additional configuration to make the change data consumable in a meaningful way, without data loss, for the capture process. For example, Oracle requires the addition of supplemental logging, and MySQL requires row-level bin logging. When using Amazon RDS as a source, we recommend ensuring that backups are enabled and that the source database is configured to retain change logs for a sufficient time (24 hours is usually enough).
Target endpoint
Task
Whenever possible, AWS DMS attempts to create the target schema for you. Sometimes, AWS DMS can't create the schema—for example, AWS DMS won't create a target Oracle schema for security reasons. For MySQL database targets, you can use extra connection parameters to have AWS DMS migrate all objects to the specified database and schema or create each database and schema for you as it finds the schema on the source.
You can create one of three possible types of migration tasks:
• Migrate existing data — If you can afford an outage long enough to copy your existing data, this option is a good one to choose. This option simply migrates the data from your source database to your target database, creating tables when necessary.
• Migrate existing data and replicate ongoing changes — This option performs a full data load while capturing changes on the source. Once the full load is complete, captured changes are applied to the target. Eventually the application of changes reaches a steady state. At this point you can shut down your applications, let the remaining changes flow through to the target, and then restart your applications pointing at the target.
• Replicate data changes only — In some situations it might be more efficient to copy existing data using a method other than AWS DMS. For example, in a homogeneous migration, using native export/import tools might be more efficient at loading the bulk data. In this situation, you can use AWS DMS to replicate changes starting when you start your bulk load to bring and keep your source and target databases in sync
By default AWS DMS starts your task as soon as you create it. However, in some situations, you might want to postpone the start of the task. For example, when using the AWS Command Line Interface
(AWS CLI), you might have a process that creates a task and a different process that starts the task based on some triggering event. As needed, you can postpone your task's start.
Schema and code migration
AWS DMS doesn't perform schema or code conversion. You can use tools such as Oracle SQL
Developer, MySQL Workbench, or pgAdmin III to move your schema if your source and target are the same database engine. If you want to convert an existing schema to a different database engine, you can use the AWS Schema Conversion Tool. It can create a target schema and also can generate and create an entire schema: tables, indexes, views, and so on. You can also use the tool to convert PL/
SQL or TSQL to PgSQL and other formats. For more information on the AWS Schema Conversion
Tool, see AWS Schema Conversion Tool .
Sources for AWS Database Migration Service
You can use the following databases as a source for data migration using AWS Database Migration
Service.
On-premises and EC2 instance databases
• Oracle versions 10.2 and later, 11g, and up to 12.1, for the Enterprise, Standard, Standard One, and
Standard Two editions
API Version API Version 2016-01-01
5
AWS Database Migration Service User Guide
Targets
• Microsoft SQL Server versions 2005, 2008, 2008R2, 2012, and 2014, for the Enterprise, Standard,
Workgroup, and Developer editions. The Web and Express editions are not supported.
• MySQL versions 5.5, 5.6, and 5.7
• MariaDB (supported as a MySQL-compatible data source)
• PostgreSQL version 9.4 and later
• MongoDB
• SAP Adaptive Server Enterprise (ASE) 15.7 and later
Amazon RDS instance databases
• Oracle versions 11g (versions 11.2.0.3.v1 and later) and 12c, for the Enterprise, Standard, Standard
One, and Standard Two editions
• Microsoft SQL Server versions 2008R2, 2012, and 2014, for the Enterprise, Standard, Workgroup, and
Developer editions. Note that change data capture (CDC) operations are not supported. The Web and
Express editions are not supported.
• MySQL versions 5.5, 5.6, and 5.7
• MariaDB (supported as a MySQL-compatible data source)
• PostgreSQL 9.4 and later. Note that Change Data Capture (CDC) is only supported for versions 9.4.9
and higher and 9.5.4 and higher. The rds.logical_replication
parameter, which is required for CDC, is supported only in these versions and later.
• Amazon Aurora (supported as a MySQL-compatible data source)
Targets for AWS Database Migration Service
You can use the following databases as a target for data replication using AWS Database Migration
Service.
On-premises and Amazon EC2 instance databases
• Oracle versions 10g, 11g, 12c, for the Enterprise, Standard, Standard One, and Standard Two editions
• Microsoft SQL Server versions 2005, 2008, 2008R2, 2012, and 2014, for the Enterprise, Standard,
Workgroup, and Developer editions. The Web and Express editions are not supported.
• MySQL, versions 5.5, 5.6, and 5.7
• MariaDB (supported as a MySQL-compatible data target)
• PostgreSQL, versions 9.3 and later
• SAP Adaptive Server Enterprise (ASE) 15.7 and later
Amazon RDS instance databases, Amazon Redshift, Amazon DynamoDB, and Amazon S3
• Oracle versions 11g (versions 11.2.0.3.v1 and later) and 12c, for the Enterprise, Standard, Standard
One, and Standard Two editions
• Microsoft SQL Server versions 2008R2, 2012, and 2014, for the Enterprise, Standard, Workgroup, and
Developer editions. The Web and Express editions are not supported.
• MySQL, versions 5.5, 5.6, and 5.7
• MariaDB (supported as a MySQL-compatible data target)
• PostgreSQL, versions 9.3 and later
API Version API Version 2016-01-01
6
AWS Database Migration Service User Guide
Replication Instances
• Amazon Aurora (supported as a MySQL-compatible data target)
• Amazon Redshift
• Amazon S3
• Amazon DynamoDB
Replication Instances for AWS Database Migration
Service
AWS DMS creates a replication instance that runs on an Amazon Elastic Compute Cloud (Amazon
EC2) instance in a VPC based on the Amazon Virtual Private Cloud (Amazon VPC) service. You use this replication instance to perform the database migration. The replication instance provides highavailability and failover support using a Multi-AZ deployment when you select the Multi-AZ option.
In a Multi-AZ deployment, AWS DMS automatically provisions and maintains a synchronous standby replica of the replication instance in a different Availability Zone. The primary replication instance is synchronously replicated across Availability Zones to a standby replica to provide data redundancy, eliminate I/O freezes, and minimize latency spikes.
AWS DMS currently supports the T2 and C4 instance classes for replication instances. The T2 instance classes are low-cost standard instances designed to provide a baseline level of CPU performance with the ability to burst above the baseline. They are suitable for developing, configuring, and testing your database migration process, and for periodic data migration tasks that can benefit from the CPU burst capability. The C4 instance classes are designed to deliver the highest level of processor performance and achieve significantly higher packet per second (PPS) performance, lower network jitter, and lower network latency. You should use C4 instance classes if you are migrating large databases and want to minimize the migration time.
Each replication instance has a specific configuration of memory and vCPU. The following table shows the configuration for each replication instance type. For pricing information, see the Amazon Database
Migration Service pricing page .
Replication Instance Type
General Purpose dms.t2.micro
dms.t2.small
dms.t2.medium
dms.t2.large
Compute Optimized dms.c4.large
dms.c4.xlarge
vCPU
1
1
2
2
2
4
Memory (GB)
1
2
4
8
3.75
7.5
API Version API Version 2016-01-01
7
AWS Database Migration Service User Guide
Public and Private Replication Instances
Replication Instance Type
dms.c4.2xlarge
dms.c4.4xlarge
vCPU
8
16
Memory (GB)
15
30
Public and Private Replication Instances
You can specify whether a replication instance has a public or private IP address that the instance uses to connect to the source and target databases. A replication instance should have a public IP address if the source or target database is located in a network that is not connected to the replication instance's VPC by using a virtual private network (VPN), AWS Direct Connect, or VPC peering.
A private replication instance has a private IP address that cannot be accessed outside the replication network. A replication instance should have a private IP address when both the source and target databases are located in the same network that is connected to the replication instance's VPC by using a
VPN, AWS Direct Connect, or VPC peering.
A VPC peering connection is a networking connection between two VPCs that enables routing using each
VPC’s private IP addresses as if they were in the same network. For more information about VPC peering, see VPC Peering in the Amazon VPC User Guide.
AWS DMS Maintenance Window
Periodically, AWS DMS performs maintenance on AWS DMS resources. Maintenance most often involves updates to the replication instance or the replication instance's operating system (OS). You can manage the time period for your maintenance window and see maintenance updates using the AWS CLI or AWS
DMS API. The AWS DMS console is not currently supported for this work.
You can manually apply maintenance items at your convenience, or wait for the automatic maintenance process initiated by AWS DMS during your weekly maintenance window. You can find out whether a maintenance update is available for your replication instance by using the AWS CLI or AWS DMS API.
Maintenance items require that AWS DMS take your replication instance offline for a short time.
Maintenance that requires a resource to be offline includes required operating system or instance patching. Required patching is automatically scheduled only for patches that are related to security and instance reliability. Such patching occurs infrequently (typically once or twice a year) and seldom requires more than a fraction of your maintenance window.
Use the
DescribeReplicationInstances
API action to determine if there are pending modifications to your replication instance and to see the current time period for your maintenance window.
The
PendingModifiedValues
parameter indicates what parameter changes are pending. The
PreferredMaintenanceWindow
parameter shows the current time period for your maintenance window.
To change the time of the maintenance window, use the
ModifyReplicationInstance
API action and set the
PreferredMaintenanceWindow
parameter to your preferred time period.
The default maintenance window time period is determined by the AWS Region. The following table lists the maintenance window for each AWS Region that supports AWS DMS.
Region
Asia Pacific (Sydney) Region
Asia Pacific (Tokyo) Region
Time Block
12:00–20:00 UTC
13:00–21:00 UTC
API Version API Version 2016-01-01
8
AWS Database Migration Service User Guide
Setting Up a Network for Database Migration
Region Time Block
Asia Pacific (Mumbai) Region 17:30–01:30 UTC
Asia Pacific (Seoul) Region 13:00–21:00 UTC
14:00–22:00 UTC Asia Pacific (Singapore)
Region
Canada (Central) Region 06:29–14:29 UTC
EU (Frankfurt) Region
EU (Ireland) Region
EU (London) Region
South America (São Paulo)
Region
US East (N. Virginia) Region
US East (Ohio) Region
US West (N. California)
Region
US West (Oregon) Region
20:00–04:00 UTC
22:00–06:00 UTC
06:00–14:00 UTC
23:00–07:00 UTC
03:00–11:00 UTC
03:00–11:00 UTC
06:00–14:00 UTC
06:00–14:00 UTC
Setting Up a Network for Database Migration
AWS DMS always creates the replication instance in an Amazon Virtual Private Cloud (Amazon VPC), and you specify the VPC where your replication instance is located. You can use your default VPC for your account and region, or you can create a new VPC. The VPC must have two subnets in at least one
Availability Zone.
The Elastic Network Interface (ENI) allocated for the replication instance in your VPC must be associated with a security group that has rules that allow all traffic on all ports to leave (egress) the VPC. This approach allows communication from the replication instance to your source and target database endpoints, as long as correct egress rules are enabled on the endpoints. We recommend that you use the default settings for the endpoints, which allows egress on all ports to all addresses.
The source and target endpoints access the replication instance that is inside the VPC either by connecting to the VPC or by being inside the VPC. The database endpoints must include network
ACLs and security group rules (if applicable) that allow incoming access from the replication instance.
Depending on the network configuration you are using, you can use the replication instance VPC security group, the replication instance's private or public IP address, or the NAT Gateway's public IP address.
These connections form a network that you use for data migration.
Network Configurations for Database Migration
You can use several different network configurations with AWS Database Migration Service. The following are common configurations for a network used for database migration.
Topics
•
Configuration with All Database Migration Components in One VPC (p. 10)
•
Configuration with Two VPCs (p. 10)
API Version API Version 2016-01-01
9
AWS Database Migration Service User Guide
Network Configurations for Database Migration
•
Configuration for a Network to a VPC Using AWS Direct Connect or a VPN (p. 11)
•
Configuration for a Network to a VPC Using the Internet (p. 11)
•
Configuration with an Amazon RDS DB instance not in a VPC to a DB instance in a VPC Using
Configuration with All Database Migration Components in One
VPC
The simplest network for database migration is for the source endpoint, the replication instance, and the target endpoint to all be in the same VPC. This configuration is a good one if your source and target endpoints are on an Amazon Relational Database Service (Amazon RDS) DB instance or an Amazon
Elastic Compute Cloud (Amazon EC2) instance.
The following illustration shows a configuration where a database on an Amazon EC2 instance connects to the replication instance and data is migrated to an Amazon RDS DB instance.
The VPC security group used in this configuration must allow ingress on the database port from the replication instance. You can do this by either ensuring that the security group used by the replication instance has ingress to the endpoints, or by explicitly allowing the private IP address of the replication instance.
Configuration with Two VPCs
If your source endpoint and target endpoints are in different VPCs, you can create your replication instance in one of the VPCs and then link the two VPCs by using VPC peering.
A VPC peering connection is a networking connection between two VPCs that enables routing using each VPC’s private IP addresses as if they were in the same network. We recommend this method for connecting VPCs within a region. You can create VPC peering connections between your own VPCs or with a VPC in another AWS account within the same AWS region. For more information about VPC peering, see VPC Peering in the Amazon VPC User Guide.
The following illustration shows a configuration where the source database on an Amazon EC2 instance in a VPC is connected by using VPC peering to a VPC containing the replication instance and the target database on an Amazon RDS DB instance.
The VPC security groups used in this configuration must allow ingress on the database port from the replication instance.
API Version API Version 2016-01-01
10
AWS Database Migration Service User Guide
Network Configurations for Database Migration
Configuration for a Network to a VPC Using AWS Direct Connect or a VPN
Remote networks can connect to a VPC using several options such as AWS Direct Connect or a software or hardware VPN connection. These options are often used to integrate existing on-site services, such as monitoring, authentication, security, data, or other systems, by extending an internal network into the AWS cloud. By using this type of network extension, you can seamlessly connect to AWS-hosted resources such as a VPC.
The following illustration shows a configuration where the source endpoint is an on-premises database in a corporate data center. It is connected by using AWS Direct Connect or a VPN to a VPC that contains the replication instance and a target database on an Amazon RDS DB instance.
In this configuration, the VPC security group must include a routing rule that sends traffic destined for a specific IP address or range to a host that can bridge traffic from the Amazon VPC into the on-premises
VPN. In this case, the NAT host includes its own security group settings that must allow traffic from the replication instance’s private IP address or security group into the NAT instance.
Configuration for a Network to a VPC Using the Internet
If you don't use a VPN or AWS Direct Connect to connect to AWS resources, you can use the Internet to migrate a database to an Amazon EC2 instance or Amazon RDS DB instance. This configuration involves a public replication instance in a VPC with an Internet gateway that contains the target endpoint and the replication instance.
To add an Internet gateway to your VPC, see Attaching an Internet Gateway in the Amazon VPC User
Guide.
The VPC security group must include routing rules that send traffic not destined for the VPC by default to the Internet gateway. In this configuration, the connection to the endpoint will appear to come from the public IP address of the replication instance, not the private IP address.
Configuration with an Amazon RDS DB instance not in a VPC to a DB instance in a VPC Using ClassicLink
You can use ClassicLink, in conjunction with a proxy server, to connect an Amazon RDS DB instance that is not in a VPC to a AWS DMS replication server and DB instance that reside in a VPC. ClassicLink allows you to link an EC2-Classic DB instance to a VPC in your account, within the same region. After you've created the link, the source DB instance can communicate with the replication instance inside the VPC using their private IP addresses. Since the replication instance in the VPC cannot directly access
API Version API Version 2016-01-01
11
AWS Database Migration Service User Guide
Creating a Replication Subnet Group the source DB instance on the EC2-Classic platform using ClassicLink, you must use a proxy server to connect the source DB instance to the VPC containing the replication instance and target DB instance.
The proxy server uses ClassicLink to connect to the VPC, and port forwarding on the proxy server allows communication between the source DB instance and the target DB instance in the VPC.
AWS Database Migration Service (p. 204) .
Creating a Replication Subnet Group
As part of the network to use for database migration, you need to specify what subnets in your Amazon
Virtual Private Cloud (Amazon VPC) you plan to use. A subnet is a range of IP addresses in your VPC in a given Availability Zone. These subnets can be distributed among the Availability Zones for the region where your VPC is located.
You create a replication instance in a subnet that you select, and you can manage what subnet a source or target endpoint uses by using the AWS DMS console.
You create a replication subnet group to define which subnets will be used. You must specify at least one subnet in two different Availability Zones.
To create a replication subnet group
1. Sign in to the AWS Management Console and choose AWS Database Migration Service. Note that if you are signed in as an AWS Identity and Access Management (IAM) user, you must have the appropriate permissions to access AWS DMS. For more information on the permissions required for
database migration, see IAM Permissions Needed to Use AWS DMS (p. 42)
.
2. In the navigation pane, choose Subnet Groups.
3. Choose Create Subnet Group.
4. On the Edit Replication Subnet Group page, shown following, specify your replication subnet group information. The following table describes the settings.
API Version API Version 2016-01-01
12
AWS Database Migration Service User Guide
Setting an Encryption Key
For This Option
Identifier
Do This
Type a name for the replication subnet group that contains from 8 to 16 printable ASCII characters
(excluding /,", and @). The name should be unique for your account for the region you selected. You can choose to add some intelligence to the name such as including the region and task you are performing, for example
DMSdefault-VPC
.
Type a brief description of the replication subnet group.
Description
VPC
Choose the VPC you want to use for database migration.
Keep in mind that the VPC must have at least one subnet in at least two Availability Zones.
Available Subnets
Choose the subnets you want to include in the replication subnet group. You must select subnets in at least two
Availability Zones.
5. Choose Add to add the subnets to the replication subnet group.
6. Choose Create.
Setting an Encryption Key for AWS Database
Migration Service
AWS DMS encrypts the storage used by a replication instance and the endpoint connection information.
To encrypt the storage used by a replication instance, AWS DMS uses a master key that is unique to your
AWS account. You can view and manage this master key with AWS Key Management Service (AWS KMS).
API Version API Version 2016-01-01
13
AWS Database Migration Service User Guide
Tagging
You can use the default master key in your account ( aws/dms
) or a custom master key that you create. If you have an existing AWS KMS encryption key, you can also use that key for encryption.
You can specify your own encryption key by supplying a KMS key identifier to encrypt your AWS DMS resources. When you specify your own encryption key, the user account used to perform the database migration must have access to that key. For more information on creating your own encryption keys and giving users access to an encryption key, see the
KMS Developer Guide
.
If you don't specify a KMS key identifier, then AWS DMS uses your default encryption key. KMS creates the default encryption key for AWS DMS for your AWS account. Your AWS account has a different default encryption key for each AWS region.
To manage the keys used for encrypting your AWS DMS resources, you use KMS. You can find KMS in the
AWS Management Console by choosing Identity & Access Management on the console home page and then choosing Encryption Keys on the navigation pane. KMS combines secure, highly available hardware and software to provide a key management system scaled for the cloud. Using KMS, you can create encryption keys and define the policies that control how these keys can be used. KMS supports AWS
CloudTrail, so you can audit key usage to verify that keys are being used appropriately. Your KMS keys can be used in combination with AWS DMS and supported AWS services such as Amazon RDS, Amazon
Simple Storage Service (Amazon S3), Amazon Elastic Block Store (Amazon EBS), and Amazon Redshift.
Once you have created your AWS DMS resources with a specific encryption key, you cannot change the encryption key for those resources. Make sure to determine your encryption key requirements before you create your AWS DMS resources.
Tagging AWS Database Migration Service
Resources
You can use AWS Database Migration Service tags to add metadata to your AWS DMS resources. In addition, these tags can be used with IAM policies to manage access to AWS DMS resources and to control what actions can be applied to the AWS DMS resources. Finally, these tags can be used to track costs by grouping expenses for similarly tagged resources.
All AWS DMS resources can be tagged:
• Replication instances
• Endpoints
• Replication tasks
• Certificates
An AWS DMS tag is a name-value pair that you define and associate with an AWS DMS resource. The name is referred to as the key. Supplying a value for the key is optional. You can use tags to assign arbitrary information to an AWS DMS resource. A tag key could be used, for example, to define a category, and the tag value could be a item in that category. For example, you could define a tag key of
“project” and a tag value of “Salix,” indicating that the AWS DMS resource is assigned to the Salix project.
You could also use tags to designate AWS DMS resources as being used for test or production by using a key such as environment=test or environment =production. We recommend that you use a consistent set of tag keys to make it easier to track metadata associated with AWS DMS resources.
Use tags to organize your AWS bill to reflect your own cost structure. To do this, sign up to get your AWS account bill with tag key values included. Then, to see the cost of combined resources, organize your billing information according to resources with the same tag key values. For example, you can tag several
API Version API Version 2016-01-01
14
AWS Database Migration Service User Guide
API resources with a specific application name, and then organize your billing information to see the total cost of that application across several services. For more information, see Cost Allocation and Tagging in
About AWS Billing and Cost Management.
Each AWS DMS resource has a tag set, which contains all the tags that are assigned to that AWS DMS resource. A tag set can contain as many as ten tags, or it can be empty. If you add a tag to an AWS DMS resource that has the same key as an existing tag on resource, the new value overwrites the old value.
AWS does not apply any semantic meaning to your tags; tags are interpreted strictly as character strings.
AWS DMS might set tags on an AWS DMS resource, depending on the settings that you use when you create the resource.
The following list describes the characteristics of an AWS DMS tag.
• The tag key is the required name of the tag. The string value can be from 1 to 128 Unicode characters in length and cannot be prefixed with "aws:" or "dms:". The string might contain only the set of
Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\
\-]*)$").
• The tag value is an optional string value of the tag. The string value can be from 1 to 256 Unicode characters in length and cannot be prefixed with "aws:" or "dms:". The string might contain only the set of Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\
\-]*)$").
Values do not have to be unique in a tag set and can be null. For example, you can have a key-value pair in a tag set of project/Trinity and cost-center/Trinity.
You can use the AWS CLI or the AWS DMS API to add, list, and delete tags on AWS DMS resources. When using the AWS CLI or the AWS DMS API, you must provide the Amazon Resource Name (ARN) for the AWS
DMS resource you want to work with. For more information about constructing an ARN, see
Constructing an Amazon Resource Name (ARN) for Use with AWS Database Migration Service (p. 16)
.
Note that tags are cached for authorization purposes. Because of this, additions and updates to tags on
AWS DMS resources might take several minutes before they are available.
API
You can add, list, or remove tags for a AWS DMS resource using the AWS DMS API.
• To add a tag to an AWS DMS resource, use the
AddTagsToResource
operation.
• To list tags that are assigned to an AWS DMS resource, use the
ListTagsForResource
operation.
• To remove tags from an AWS DMS resource, use the
RemoveTagsFromResource
operation.
To learn more about how to construct the required ARN, see Constructing an Amazon Resource Name
(ARN) for Use with AWS Database Migration Service (p. 16) .
When working with XML using the AWS DMS API, tags use the following schema:
<Tagging>
<TagSet>
<Tag>
<Key>Project</Key>
<Value>Trinity</Value>
</Tag>
<Tag>
API Version API Version 2016-01-01
15
AWS Database Migration Service User Guide
Constructing an ARN
<Key>User</Key>
<Value>Jones</Value>
</Tag>
</TagSet>
</Tagging>
The following table provides a list of the allowed XML tags and their characteristics. Note that values for
Key and Value are case dependent. For example, project=Trinity and PROJECT=Trinity are two distinct tags.
Tagging element
TagSet
Tag
Key
Value
Description
A tag set is a container for all tags assigned to an Amazon RDS resource.
There can be only one tag set per resource. You work with a TagSet only through the AWS DMS API.
A tag is a user-defined key-value pair. There can be from 1 to 10 tags in a tag set.
A key is the required name of the tag. The string value can be from 1 to 128
Unicode characters in length and cannot be prefixed with "dms:" or "aws:".
The string might only contain only the set of Unicode letters, digits, whitespace, '_', '.', '/', '=', '+', '-' (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\\-]*)$").
Keys must be unique to a tag set. For example, you cannot have a key-pair in a tag set with the key the same but with different values, such as project/
Trinity and project/Xanadu.
A value is the optional value of the tag. The string value can be from 1 to
256 Unicode characters in length and cannot be prefixed with "dms:" or
"aws:". The string might only contain only the set of Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\
\-]*)$").
Values do not have to be unique in a tag set and can be null. For example, you can have a key-value pair in a tag set of project/Trinity and cost-center/
Trinity.
Constructing an Amazon Resource Name (ARN) for
Use with AWS Database Migration Service
If you use the AWS CLI or AWS Database Migration Service API to automate your database migration, then you need to know about working with an Amazon Resource Name (ARN). Resources that are created in Amazon Web Services are identified by an ARN, which is a unique identifier. If you use the AWS CLI or
AWS DMS API to set up your database migration, you must supply the ARN of the resource you want to work with.
An ARN for an AWS DMS resource uses the following syntax: arn:aws:dms:
<region>
:
<account number>
:
<resourcetype>
:
<resourcename>
In this syntax:
•
<region>
is the AWS Region ID of the region where the AWS DMS resource was created, such as uswest-2
.
API Version API Version 2016-01-01
16
AWS Database Migration Service User Guide
Constructing an ARN
The following table shows AWS region names and the values you should use when constructing an
ARN.
Region
Asia Pacific (Tokyo) Region
Asia Pacific (Seoul) Region
Asia Pacific (Mumbai) Region
Asia Pacific (Singapore) Region
Asia Pacific (Sydney) Region
Canada (Central) Region
EU (Frankfurt) Region
EU (Ireland) Region
EU (London) Region
Name
ap-northeast-1 ap-northeast-2 ap-south-1 ap-southeast-1 ap-southeast-2 ca-central-1 eu-central-1 eu-west-1 eu-west-2
South America (São Paulo) Region
US East (N. Virginia) Region
US East (Ohio) Region
US West (N. California) Region sa-east-1 us-east-1 us-east-2 us-west-1
US West (Oregon) Region us-west-2
•
<account number>
is your account number with dashes omitted. To find your account number, log in to your AWS account at http://aws.amazon.com, choose My Account/Console, and then choose My
Account.
•
<resourcetype>
is the type of AWS DMS resource.
The following table shows the resource types you should use when constructing an ARN for a particular AWS DMS resource.
AWS DMS Resource
Type
ARN Format
Replication instance
Endpoint arn:aws:dms:<
region
>: <
account
>:rep: <
resourcename
> arn:aws:dms:<
region
>:<
account
>:endpoint: <
resourcename
>
Replication task arn:aws:dms:<
region
>:<
account
>: task:<
resourcename
>
•
<resourcename>
is the resource name assigned to the AWS DMS resource. This is a generated arbitrary string.
The following table shows examples of ARNs for AWS DMS resources with an AWS account of
123456789012, which were created in the US East (N. Virginia) region, and has a resource name :
Resource Type
Replication instance
Sample ARN
arn:aws:dms:us-east-1:123456789012:rep:QLXQZ64MH7CXF4QCQMGRVYVXAI
API Version API Version 2016-01-01
17
Resource Type
Endpoint
Migration task
AWS Database Migration Service User Guide
Supported DDL Statements
Sample ARN
arn:aws:dms:useast-1:123456789012:endpoint:D3HMZ2IGUCGFF3NTAXUXGF6S5A arn:aws:dms:us-east-1:123456789012:task:2PVREMWNPGYJCVU2IBPTOYTIV4
DDL Statements Supported by AWS Database
Migration Service
You can execute data definition language (DDL) statements on the source database during the data migration process. These statements will be replicated to the target database by the replication server.
Supported DDL statements include the following:
• Create table
• Drop table
• Rename table
• Add column
• Drop column
• Rename column
• Change column data type
For information about which DDL statements are supported for a specific source, see the topic describing that source.
LOB Support for Source Databases
For This Option
Include LOB columns in replication
Do This
Large objects, (LOBs) can sometimes be difficult to migrate between systems. AWS DMS offers a number of options to help with the tuning of LOB columns. To see which and when datatypes are considered LOBS by AWS DMS, see the
AWS DMS documentation.
Don't include LOB columns - When you migrate data from one database to another, you might take the opportunity to rethink how your LOBs are stored, especially for heterogeneous migrations. If you want to do so, there’s no need to migrate the LOB data.
Full LOB mode - In full LOB mode AWS DMS migrates all LOBs from source to target regardless of size. In this configuration, AWS DMS has no information about the maximum size of LOBs to expect. Thus, LOBs are migrated one at a time, piece by piece. Full LOB mode can be quite slow.
API Version API Version 2016-01-01
18
For This Option
Max LOB size (K)
LOB chunk size (K)
AWS Database Migration Service User Guide
LOB Support for Source Databases
Do This
Limited LOB mode - In limited LOB mode, you set a maximum size LOB that AWS DMS should accept. Doing so allows AWS DMS to pre-allocate memory and load the LOB data in bulk. LOBs that exceed the maximum LOB size are truncated and a warning is issued to the log file. In
limited
LOB mode you get significant performance gains over full
LOB mode. We recommend that you use limited LOB mode whenever possible.
Note
With Oracle, LOBs are treated as VARCHAR data types whenever possible. This approach means
AWS DMS fetches them from the database in bulk, which is significantly faster than other methods.
The maximum size of a VARCHAR in Oracle is 64K, therefore a limited LOB size of less than 64K is optimal when Oracle is your source database.
When a task is configured to run in limited LOB mode, this option determines the maximum size LOB that AWS DMS accepts. Any LOBs that are larger than this value will be truncated to this value.
When a task is configured to use full LOB mode, AWS DMS retrieves LOBs in pieces. This option determines the size of each piece. When setting this option, pay particular attention to the maximum packet size allowed by your network configuration. If the LOB chunk size exceeds your maximum allowed packet size, you might see disconnect errors.
API Version API Version 2016-01-01
19
AWS Database Migration Service User Guide
Sign Up for AWS
Setting Up
Before you use AWS Database Migration Service (AWS DMS) for the first time, you'll need to complete the following tasks:
1.
2.
3.
Determine Requirements (p. 22)
Sign Up for AWS
When you sign up for Amazon Web Services (AWS), your AWS account is automatically signed up for all services in AWS, including AWS DMS. You are charged only for the services that you use.
With AWS DMS, you pay only for the resources you use. The AWS DMS replication instance that you create will be live (not running in a sandbox). You will incur the standard AWS DMS usage fees for the instance until you terminate it. For more information about AWS DMS usage rates, see the AWS DMS product page . If you are a new AWS customer, you can get started with AWS DMS for free; for more information, see AWS Free Usage Tier .
If you have an AWS account already, skip to the next task. If you don't have an AWS account, use the following procedure to create one.
To create an AWS account
1. Open https://aws.amazon.com/ , and then choose Create an AWS Account.
2. Follow the online instructions.
Part of the sign-up procedure involves receiving a phone call and entering a PIN using the phone keypad.
Note your AWS account number, because you'll need it for the next task.
Create an IAM User
Services in AWS, such as AWS DMS, require that you provide credentials when you access them, so that the service can determine whether you have permission to access its resources. The console requires
API Version API Version 2016-01-01
20
AWS Database Migration Service User Guide
Create an IAM User your password. You can create access keys for your AWS account to access the command line interface or
API. However, we don't recommend that you access AWS using the credentials for your AWS account; we recommend that you use AWS Identity and Access Management (IAM) instead. Create an IAM user, and then add the user to an IAM group with administrative permissions or and grant this user administrative permissions. You can then access AWS using a special URL and the credentials for the IAM user.
If you signed up for AWS but have not created an IAM user for yourself, you can create one using the IAM console.
To create an IAM user for yourself and add the user to an Administrators group
1. Sign in to the IAM console at https://console.aws.amazon.com/iam/ .
2. In the navigation pane, choose Users, and then choose Add user.
3. For User name, type a user name, such as
Administrator
. The name can consist of letters, digits, and the following characters: plus (+), equal (=), comma (,), period (.), at (@), underscore (_), and hyphen (-). The name is not case sensitive and can be a maximum of 64 characters in length.
4. Select the check box next to AWS Management Console access, select Custom password, and then type the new user's password in the text box. You can optionally select Require password reset to force the user to select a new password the next time the user signs in.
5. Choose Next: Permissions.
6. On the Set permissions for user page, choose Add user to group.
7. Choose Create group.
8. In the Create group dialog box, type the name for the new group. The name can consist of letters, digits, and the following characters: plus (+), equal (=), comma (,), period (.), at (@), underscore (_), and hyphen (-). The name is not case sensitive and can be a maximum of 128 characters in length.
9. For
Filter, choose Job function.
10. In the policy list, select the check box for AdministratorAccess. Then choose Create group.
11. Back in the list of groups, select the check box for your new group. Choose Refresh if necessary to see the group in the list.
12. Choose Next: Review to see the list of group memberships to be added to the new user. When you are ready to proceed, choose Create user.
You can use this same process to create more groups and users, and to give your users access to your
AWS account resources. To learn about using policies to restrict users' permissions to specific AWS resources, go to Access Management and Example Policies for Administering AWS Resources .
To sign in as this new IAM user, sign out of the AWS console, then use the following URL, where
your_aws_account_id
is your AWS account number without the hyphens (for example, if your AWS account number is
1234-5678-9012
, your AWS account ID is
123456789012
): https://
your_aws_account_id
.signin.aws.amazon.com/console/
Enter the IAM user name and password that you just created. When you're signed in, the navigation bar displays "your_user_name @ your_aws_account_id".
If you don't want the URL for your sign-in page to contain your AWS account ID, you can create an account alias. On the IAM dashboard, choose Customize and type an alias, such as your company name.
To sign in after you create an account alias, use the following URL.
https://
your_account_alias
.signin.aws.amazon.com/console/
To verify the sign-in link for IAM users for your account, open the IAM console and check under
AWS
Account Alias on the dashboard.
API Version API Version 2016-01-01
21
AWS Database Migration Service User Guide
Determine Requirements
Determine Requirements
A database migration requires thorough testing and a sound backup strategy. To successfully migrate a database using AWS DMS, you must have expertise, time, and knowledge about your source database, your network, the AWS network, your requirements, and your target database schema, as described following.
Available Regions
Ensure that AWS DMS is available in the region that you need. AWS DMS is currently available in the following regions:
Region
Asia Pacific (Tokyo) Region
Asia Pacific (Seoul) Region
Asia Pacific (Mumbai) Region
Asia Pacific (Singapore) Region
Asia Pacific (Sydney) Region
Canada (Central) Region
EU (Frankfurt) Region
EU (Ireland) Region
EU (London) Region
South America (São Paulo) Region
US East (N. Virginia) Region
US East (Ohio) Region
US West (N. California) Region
US West (Oregon) Region
Name
ap-northeast-1 ap-northeast-2 ap-south-1 ap-southeast-1 ap-southeast-2 ca-central-1 eu-central-1 eu-west-1 eu-west-2 sa-east-1 us-east-1 us-east-2 us-west-1 us-west-2
Expertise
A database migration requires expertise in several areas.
• You should have a thorough knowledge of the database engine you are migrating from and the database engine you are migrating to.
• You should understand both the network you are migrating from and how that network connects to AWS.
• You should have a thorough knowledge of the AWS service you are migrating to and the AWS
Identity and Access Management (IAM) service.
Time
• In most cases, it helps if you have an understanding of software architecture.
Migration projects can take from two weeks to several months to complete.
• A successful migration can require several iterations.
• The migration process can take more time than you anticipate.
API Version API Version 2016-01-01
22
AWS Database Migration Service User Guide
Determine Requirements
• Do you have a hard date on when your database migration must be completed?
• Migration planning can often take longer than the migration itself.
Knowledge of your source database
The size of your database and the data types it contains can have a dramatic impact on your migration.
• How many schemas and tables does your database contain?
• Does your database have any very large tables (more than 5 GB in size)?
• Do you know what the transaction boundaries look like?
• Does your database have data types that AWS DMS does not support?
• Do you have LOBs in your tables? If so, how large are the LOBs?
• Do your tables with LOBs have primary keys?
• How busy is your source database?
• What kind of users, roles, and permissions do you have on the source database?
• When was the last time you vacuumed or compacted your source database?
Knowledge of your network and the AWS network
You must connect the network that the source database uses to AWS.
• How will your database access the AWS network?
• Which Amazon Virtual Private Cloud (Amazon VPC) will you use?
• Which Amazon Elastic Compute Cloud (Amazon EC2) security group will you use?
• How much bandwidth will you need to move all your data?
An understanding of your requirements
The following questions make up much of your migration planning:
• How much downtime can you afford?
• Do you need the source database to be available after migration?
• Do you know why you preferred one target database engine over another database engine?
• What are your high availability requirements?
• Does all the data needs to be migrated?
• Does all the data need to be migrated to the same database?
• Do you understand the benefits of using Amazon RDS (automated backups, high availability, and so on)?
• Do you understand the limits of using Amazon RDS (storage size, admin user, and so on)?
• What happens to your application during the migration process?
• What is your contingency plan if the migration is unsuccessful?
Knowledge of your target database schema
AWS DMS creates only tables and primary keys in the target database. You must recreate any other database requirements.
• You can use the AWS Schema Conversion Tool (AWS SCT) to migrate a database schema. It works best when migrating from one database engine to a different database engine. For more information on the AWS Schema Conversion Tool, see AWS Schema Conversion Tool .
• The AWS SCT does not support schema conversions from and to the same database engine type. If you need to convert a schema when going to the same database engine, use the database engine's native tools for the conversion.
• The AWS SCT does not currently support orchestration.
• Postpone any schema changes until after the migration.
API Version API Version 2016-01-01
23
AWS Database Migration Service User Guide
Start a Database Migration
Getting Started
AWS Database Migration Service (AWS DMS) helps you migrate databases to AWS easily and securely.
You can migrate your data to and from most widely used commercial and open-source databases, such as Oracle, MySQL, and PostgreSQL. The service supports homogeneous migrations such as Oracle to
Oracle, and also heterogeneous migrations between different database platforms, such as Oracle to
PostgreSQL or MySQL to Oracle.
For information on the cost of database migration using AWS Database Migration Service, see the AWS
Database Migration Service pricing page .
Topics
•
Start a Database Migration with AWS Database Migration Service (p. 24)
•
•
Step 2: Create a Replication Instance (p. 25)
•
Step 3: Specify Database Endpoints (p. 28)
•
•
Start a Database Migration with AWS Database
Migration Service
There are several ways to begin a database migration. You can select the AWS DMS console wizard that will walk you through each step of the process, or you can do each step by selecting the appropriate task from the navigation pane. You can also use the AWS CLI; for information on using the CLI with AWS DMS, see DMS .
To use the wizard, select Getting started for from the navigation pane on the AWS DMS console. You can use the wizard to help create your first data migration. Following the wizard process, you allocate a replication instance that performs all the processes for the migration, specify a source and a target database, and then create a task or set of tasks to define what tables and replication processes you want to use. AWS DMS then creates your replication instance and performs the tasks on the data being migrated.
API Version API Version 2016-01-01
24
AWS Database Migration Service User Guide
Step 1: Welcome
Alternatively, you can create each of the components of an AWS DMS database migration by selecting the items from the navigation pane. For a database migration, you must do the following:
• Complete the tasks outlined in
• Allocate a replication instance that performs all the processes for the migration
• Specify a source and a target database endpoint
• Create a task or set of tasks to define what tables and replication processes you want to use
Step 1: Welcome
If you start your database migration using the AWS DMS console wizard, you will see the Welcome page, which explains the process of database migration using AWS DMS.
To start a database migration from the console's Welcome page
• Choose Next.
Step 2: Create a Replication Instance
Your first task in migrating a database is to create a replication instance that has sufficient storage and processing power to perform the tasks you assign and migrate data from your source database to the target database. The required size of this instance varies depending on the amount of data you need to migrate and the tasks that you need the instance to perform. For more information about replication instances, see
Replication Instances for AWS Database Migration Service (p. 7)
.
API Version API Version 2016-01-01
25
AWS Database Migration Service User Guide
Step 2: Create a Replication Instance
The procedure following assumes that you have chosen the AWS DMS console wizard. Note that you can also do this step by selecting Replication instances from the AWS DMS console's navigation pane and then selecting Create replication instance.
To create a replication instance by using the AWS console
1. On the Create replication instance page, specify your replication instance information. The following table describes the settings.
For This Option
Name
Description
Instance class
VPC
Do This
Type a name for the replication instance that contains from 8 to 16 printable ASCII characters (excluding /,", and @). The name should be unique for your account for the region you selected. You can choose to add some intelligence to the name, such as including the region and task you are performing, for example
west2mysql2mysql-instance1
.
Type a brief description of the replication instance.
Choose an instance class with the configuration you need for your migration. Keep in mind that the instance must have enough storage, network, and processing power to successfully complete your migration. For more information on how to determine which instance class is best for your migration, see
Database Migration Service (p. 7) .
Choose the Amazon Virtual Private Cloud (Amazon VPC) you want to use. If your source or your target database is in an VPC, choose that VPC. If your source and your target databases are in different VPCs, ensure that they are both in public subnets and are publicly accessible,
API Version API Version 2016-01-01
26
AWS Database Migration Service User Guide
Step 2: Create a Replication Instance
For This Option
Multi-AZ
Do This
and then choose the VPC where the replication instance is to be located. The replication instance must be able to access the data in the source VPC. If neither your source nor your target database is in a VPC, select a VPC where the replication instance is to be located.
Use this optional parameter to create a standby replica of your replication instance in another Availability Zone for failover support. If you intend to use change data capture (CDC) or ongoing replication, you should enable this option.
Publicly accessible
Choose this option if you want the replication instance to be accessible from the Internet.
2. Choose the Advanced tab, shown following, to set values for network and encryption settings if you need them.
3. Specify the additional settings. The following table describes the settings.
For This Option
Allocated storage (GB)
Do This
Storage is primarily consumed by log files and cached transactions. For caches transactions, storage is used only
API Version API Version 2016-01-01
27
AWS Database Migration Service User Guide
Step 3: Specify Database Endpoints
For This Option
Replication Subnet Group
Availability zone
VPC Security group(s)
KMS master key
Do This
when the cached transactions need to be written to disk.
Therefore, AWS DMS doesn’t use a significant amount of storage.Some exceptions include the following:
• Very large tables that incur a significant transaction load. Loading a large table can take some time, so cached transactions are more likely to be written to disk during a large table load.
• Tasks that are configured to pause prior to loading cached transactions. In this case, all transactions are cached until the full load completes for all tables. With this configuration, a fair amount of storage might be consumed by cached transactions.
• Tasks configured with tables being loaded into Amazon
Redshift. However, this configuration isn't an issue when Aurora is the target.
In most cases, the default allocation of storage is sufficient. However, it’s always a good idea to pay attention to storage related metrics and scale up your storage if you find you are consuming more than the default allocation.
Choose the replication subnet group in your selected VPC where you want the replication instance to be created.
If your source database is in a VPC, choose the subnet group that contains the source database as the location for your replication instance. For more information about replication subnet groups, see
.
Choose the Availability Zone where your source database is located.
The replication instance is created in a VPC. If your source database is in a VPC, select the VPC security group that provides access to the DB instance where the database resides.
Choose the encryption key to use to encrypt replication storage and connection information. If you choose
(Default) aws/dms, the default AWS Key Management
Service (AWS KMS) key associated with your account and region is used. For more information on using the encryption key, see
Specifying KMS Permissions (p. 54) .
4. Choose Next.
Step 3: Specify Database Endpoints
While your replication instance is being created, you can specify the source and target databases. The source and target databases can be on an Amazon Elastic Compute Cloud (Amazon EC2) instance, an
Amazon Relational Database Service (Amazon RDS) DB instance, or an on-premises database.
API Version API Version 2016-01-01
28
AWS Database Migration Service User Guide
Step 3: Specify Database Endpoints
The procedure following assumes that you have chosen the AWS DMS console wizard. Note that you can also do this step by selecting Endpoints from the AWS DMS console's navigation pane and then selecting
Create endpoint. When using the console wizard, you create both the source and target endpoints on the same page. When not using the console wizard, you create each endpoint separately.
To specify source or target database endpoints using the AWS console
1. On the Connect source and target database endpoints page, specify your connection information for the source or target database. The following table describes the settings.
API Version API Version 2016-01-01
29
AWS Database Migration Service User Guide
Step 3: Specify Database Endpoints
For This Option
Endpoint identifier
Source engine and Target engine
Server name
Do This
Type the name you want to use to identify the endpoint.
You might want to include in the name the type of endpoint, such as
oracle-source
or
PostgreSQL-target
.
The name must be unique for all replication instances.
Choose the type of database engine that is the endpoint.
Type the server name. For an on-premises database, this can be the IP address or the public hostname.
For an Amazon RDS DB instance, this can be the endpoint (also called the DNS name) for the DB instance, such as
mysqlsrvinst.abcd12345678.uswest-2.rds.amazonaws.com
.
Type the port used by the database.
Port
SSL mode
User name
Choose an SSL mode if you want to enable connection encryption for this endpoint. Depending on the mode you select, you might be asked to provide certificate and server certificate information.
Type the user name with the permissions required to allow data migration. For information on the permissions required, see the security section for the source or target database engine in this user guide.
Password
Type the password for the account with the required permissions. If you want to use special characters in your password, such as "+" or "&", enclose the entire password in curly braces "{}".
2. Choose the Advanced tab, shown following, to set values for connection string and encryption key if you need them. You can test the endpoint connection by choosing Run test.
API Version API Version 2016-01-01
30
AWS Database Migration Service User Guide
Step 3: Specify Database Endpoints
For This Option
Extra connection attributes
KMS master key
Do This
Type any additional connection parameters here. For more information about extra connection attributes, see
Using Extra Connection Attributes with AWS Database
.
Choose the encryption key to use to encrypt replication storage and connection information. If you choose
(Default) aws/dms, the default AWS Key Management
Service (AWS KMS) key associated with your account and region is used. For more information on using the encryption key, see
Specifying KMS Permissions (p. 54) .
API Version API Version 2016-01-01
31
AWS Database Migration Service User Guide
Step 4: Create a Task
Step 4: Create a Task
Create a task to specify what tables to migrate, to map data using a target schema, and to create new tables on the target database. As part of creating a task, you can choose the type of migration: to migrate existing data, migrate existing data and replicate ongoing changes, or replicate data changes only.
Using AWS DMS, you can specify precise mapping of your data between the source and the target database. Before you specify your mapping, make sure you review the documentation section on data type mapping for your source and your target database.
You can choose to start a task as soon as you finish specifying information for that task on the
Create task page, or you can start the task from the Dashboard page once you finish specifying task information.
The procedure following assumes that you have chosen the AWS DMS console wizard and specified replication instance information and endpoints using the console wizard. Note that you can also do this step by selecting Tasks from the AWS DMS console's navigation pane and then selecting Create task.
To create a migration task
1. On the Create Task page, specify the task options. The following table describes the settings.
For This Option
Task name
Do This
Type a name for the task.
API Version API Version 2016-01-01
32
AWS Database Migration Service User Guide
Step 4: Create a Task
For This Option
Task description
Source endpoint
Target endpoint
Do This
Type a description for the task.
Shows the source endpoint that will be used.
Shows the target endpoint that will be used.
Replication instance
Migration type
Start task on create
Shows the replication instance that will be used.
Choose the migration method you want to use. You can choose to have just the existing data migrated to the target database or have ongoing changes sent to the target database in addition to the migrated data.
When this option is selected, the task begins as soon as it is created.
2. Choose the Task Settings tab, shown following, and specify values for your target table, LOB support, and to enable logging. The task settings shown depend on the Migration type value you select. For example, when you select Migrate existing data, the following options are shown:
For This Option
Target table preparation mode
Include LOB columns in replication
Do This
Do nothing - Data and metadata of the target tables are not changed.
Drop tables on target - The tables are dropped and new tables are created in their place.
Truncate - Tables are truncated without affecting table metadata.
Don't include LOB columns - LOB columns will be excluded from the migration.
Full LOB mode - Migrate complete LOBs regardless of size. LOBs are migrated piecewise in chunks controlled by the LOB chunk size. This method is slower than using
Limited LOB Mode.
API Version API Version 2016-01-01
33
AWS Database Migration Service User Guide
Step 4: Create a Task
For This Option
Max LOB size (kb)
Do This
Limited LOB mode - Truncate LOBs to ‘Max LOB Size’
This method is faster than using Full LOB Mode.
For more information about LOB support in AWS DMS, see
LOB Support for Source Databases (p. 18)
In Limited LOB Mode, LOB columns which exceed the setting of Max LOB Size will be truncated to the specified
Max LOB Size.
Enables logging by Amazon CloudWatch.
Enable logging
When you select Migrate existing data and replicate for Migration type, the following options are shown:
For This Option
Target table preparation mode
Do This
Do nothing - Data and metadata of the target tables are not changed.
Drop tables on target - The tables are dropped and new tables are created in their place.
Truncate - Tables are truncated without affecting table metadata.
API Version API Version 2016-01-01
34
AWS Database Migration Service User Guide
Monitor Your Task
For This Option
Stop task after full load completes
Include LOB columns in replication
Do This
Don't stop - Do not stop the task, immediately apply cached changes and continue on.
Stop before applying cached changes - Stop the task prior to the application of cached changes. This will allow you to add secondary indexes which may speed the application of changes.
Stop after applying cached changes - Stop the task after cached changes have been applied. This will allow you to add foreign keys, triggers etc. if you are using
Transactional Apply.
Don't include LOB columns - LOB columns will be excluded from the migration.
Full LOB mode - Migrate complete LOBs regardless of size. LOBs are migrated piecewise in chunks controlled by the LOB chunk size. This method is slower than using
Limited LOB Mode.
Limited LOB mode - Truncate LOBs to ‘Max LOB Size’
This method is faster than using Full LOB Mode.
Max LOB size (kb)
In Limited LOB Mode, LOB columns which exceed the setting of Max LOB Size will be truncated to the specified
Max LOB Size.
Enables logging by Amazon CloudWatch.
Enable logging
3. Choose the Table mappings tab, shown following, to set values for schema mapping and the mapping method. If you choose Custom, you can specify the target schema and table values. For more information about table mapping, see
Using Table Mapping with an Task to Select and Filter
4. Once you have finished with the task settings, choose Create task.
Monitor Your Task
If you select Start task on create when you create a task, your task begins immediately to migrate your data when you choose Create task. You can view statistics and monitoring information for your task
API Version API Version 2016-01-01
35
AWS Database Migration Service User Guide
Monitor Your Task by choosing the running task from the AWS Management Console. The following screenshot shows the
table statistics of a database migration. For more information about monitoring, see Monitoring AWS
Database Migration Service Tasks (p. 148)
API Version API Version 2016-01-01
36
AWS Database Migration Service User Guide
Improving Performance
Best Practices
To use AWS Database Migration Service (AWS DMS) most effectively, see this section's recommendations on the most efficient way to migrate your data.
Topics
•
Improving the Performance of an AWS Database Migration Service Migration (p. 37)
•
Determining the Optimum Size for a Replication Instance (p. 38)
•
Reducing Load on Your Source Database (p. 39)
•
Using the Task Log to Troubleshoot Migration Issues (p. 39)
•
•
Migrating Large Binary Objects (LOBs) (p. 40)
•
•
Changing the User/Schema for an Oracle Target (p. 40)
Improving the Performance of an AWS Database
Migration Service Migration
A number of factors affect the performance of your AWS DMS migration:
• Resource availability on the source
• The available network throughput
• The resource capacity of the replication server
• The ability of the target to ingest changes
• The type and distribution of source data
• The number of objects to be migrated
In our tests, we've migrated a terabyte of data in approximately 12 to 13 hours under ideal conditions.
These ideal conditions included using source databases running on Amazon Elastic Compute Cloud
(Amazon EC2) and in Amazon Relational Database Service (Amazon RDS) with target databases in
Amazon RDS. Our source databases contained a representative amount of relatively evenly distributed data with a few large tables containing up to 250 GB of data.
API Version API Version 2016-01-01
37
AWS Database Migration Service User Guide
Sizing a replication instance
Your migration's performance can be limited by one or more bottlenecks long the way. The following list shows a few things you can do to increase performance:
Load multiple tables in parallel
By default, AWS DMS loads eight tables at a time. You might see some performance improvement by increasing this slightly when using a very large replication server, such as a dms.c4.xlarge or larger instance. However, at some point increasing this parallelism reduces performance. If your replication server is relatively small, such as a dms.t2.medium, you'll want to reduce this number.
Remove bottlenecks on the target
During the migration, try to remove any processes that might compete with each other for write resources on your target database. As part of this process, disable unnecessary triggers, validation, and secondary indexes. When migrating to an Amazon RDS database, it’s a good idea to disable backups and Multi-AZ on the target until you’re ready to cut-over. Similarly, when migrating to non-
Amazon RDS systems, disabling any logging on the target until cut over is usually a good idea.
Use multiple tasks
Sometimes using multiple tasks for a single migration can improve performance. If you have sets of tables that don’t participate in common transactions, you might be able to divide your migration into multiple tasks. Transactional consistency is maintained within a task, so it’s important that tables in separate tasks don't participate in common transactions. Additionally, each task independently reads the transaction stream, so be careful not to put too much stress on the source system.
Improving LOB performance
For information about improving LOB migration, see
Migrating Large Binary Objects
.
Optimizing change processing
By default, AWS DMS processes changes in a transactional mode, which preserves transactional integrity. If you can afford temporary lapses in transactional integrity, you can use the batch
optimized apply option instead. This option efficiently groups transactions and applies them in batches for efficiency purposes. Note that using the batch optimized apply option almost certainly violates any referential integrity constraints, so you should disable these during the migration process and enable them again as part of the cut-over process.
Determining the Optimum Size for a Replication
Instance
Determining the correct size of your replication instance depends on several factors. The following information can help you understand the migration process and how memory and storage are used.
Tables are loaded individually; by default, eight tables are loaded at a time. While each table is loaded, the transactions for that table are cached in memory. After the available memory is used, transactions are cached to disk. When the table for those transactions is loaded, the transactions and any further transactions on that table are immediately applied to the table.
When all tables have been loaded and all outstanding cached transactions for the individual tables have been applied by AWS DMS, the source and target tables will be in sync. At this point, AWS DMS will apply transactions in a way that maintains transactional consistency. (As you can see, tables will be out of sync during the full load and while cached transactions for individual tables are being applied.)
From the preceding explanation, you can see that relatively little disk space is required to hold cached transactions. The amount of disk space used for a given migration will depend on the following:
API Version API Version 2016-01-01
38
AWS Database Migration Service User Guide
Reducing Load on Your Source Database
• Table size – Large tables take longer to load and so transactions on those tables must be cached until the table is loaded. Once a table is loaded, these cached transactions are applied and are no longer held on disk.
• Data manipulation language (DML) activity – A busy database generates more transactions. These transactions must be cached until the table is loaded. Remember, though, that transactions to an individual table are applied as soon as possible after the table is loaded, until all tables are loaded. At that point, AWS DMS applies all the transactions.
• Transaction size – Data generated by large transactions must be cached. If a table accumulates 10 GB of transactions during the full load process, those transactions will need to be cached until the full load is complete.
• Total size of the migration – Large migrations take longer and the log files that are generated are large.
• Number of tasks – The more tasks, the more caching will likely be required, and the more log files will be generated.
Anecdotal evidence shows that log files consume the majority of space required by AWS DMS. The default storage configurations are usually sufficient. Replication instances that run several tasks might require more disk space. Additionally, if your database includes large and active tables, you may need to account for transactions that are cached to disk during the full load. For example, if your load will take
24 hours and you produce 2GB of transactions per hour, you may want to ensure you have 48GB of space to accommodate cached transactions.
Reducing Load on Your Source Database
During a migration, AWS DMS performs a full table scan of the source table for each table processed in parallel. Additionally, each task will periodically query the source for change information. To perform change processing, you might be required to increase the amount of data written to your databases change log. If you find you are overburdening your source database you can reduce the number of tasks and/or tables per task for your migration. If you prefer not to add load to your source, you might consider performing the migration from a read copy of your source system. However, using a read copy does increase the replication lag.
Using the Task Log to Troubleshoot Migration
Issues
At times DMS may encounter issues (warnings or errors) which are only currently visible when viewing the task log. In particular, data truncation issues or row rejections due to foreign key violations are currently only visible via the task log. Therefore, it is important to review the task log when migrating a database.
Schema Conversion
AWS DMS doesn't perform schema or code conversion. You can use tools such as Oracle SQL Developer,
MySQL Workbench, or pgAdmin III to move your schema if your source and target are the same database engine. If you want to convert an existing schema to a different database engine, you can use the AWS
Schema Conversion Tool. It can create a target schema and also can generate and create an entire schema: tables, indexes, views, and so on. You can also use the tool to convert PL/SQL or TSQL to
PgSQL and other formats. For more information on the AWS Schema Conversion Tool, see AWS Schema
Conversion Tool .
API Version API Version 2016-01-01
39
AWS Database Migration Service User Guide
Migrating Large Binary Objects (LOBs)
Migrating Large Binary Objects (LOBs)
Migration of LOB data is done in two phases. First, the row in the LOB column is created in the target table without the LOB data. Next, the row in the target table is updated with the LOB data. This means that during the migration, the LOB columns of a table must be NULLABLE on the target database. If AWS
DMS creates the target tables, it sets LOB columns to NULLABLE, even if they are NOT NULLABLE on the source table. If you create the target tables using some other mechanism, such as Import/Export, the
LOB columns must be NULLABLE.
Replication tasks, by default, are set to run in Full LOB support mode. While this setting moves all of the
LOBS in your tables, the process is also slow. To increase the speed with which your migration task runs, you should create a new task and set the task to use “Limited Size LOB” mode. When you choose this mode you need to ensure that the setting of the MAX LOB parameter is correct. This parameter should be set to the largest LOBS size for all of your tables.
Whenever possible, use the limited LOB mode parameter for best performance. If you have a table that contains a few large LOBs and mostly smaller LOBs, consider breaking up the table before migration and consolidating the table fragments as part of migration.
AWS Database Migration Service provides full support for using large object data types (BLOBs, CLOBs, and NCLOBs). The following source endpoints have full LOB support:
• Oracle
• Microsoft SQL Server
• ODBC
The following target endpoints have full LOB support:
• Oracle
• Microsoft SQL Server
The following target endpoints have limited LOB support. You cannot use an unlimited LOB size for these target endpoints.
• Amazon Redshift
For endpoints that have full LOB support, you can also set a size limit for LOB data types.
Ongoing Replication
AWS DMS provides comprehensive ongoing replication of data, although it replicates only a limited amount of data definition language (DDL). AWS DMS doesn't propagate items such as indexes, users, privileges, stored procedures, and other database changes not directly related to table data.
If you want to use ongoing replication, you must enable the Multi-AZ option on your replication instance. The Multi-AZ option provides high availability and failover support for the replication instance.
Changing the User/Schema for an Oracle Target
When using Oracle as a target, we assume the data should be migrated into the schema/user which is used for the target connection. If you want to migrate data to a different schema, you'll need to use a
API Version API Version 2016-01-01
40
AWS Database Migration Service User Guide
Changing the User/Schema for an Oracle Target schema transformation to do so. For example, if my target endpoint connects to the user RDSMASTER and you wish to migrate from the user PERFDATA to PERFDATA, you'll need to create a transformation as follows:
{
"rule-type": "transformation",
"rule-id": "2",
"rule-name": "2",
"rule-action": "rename",
"rule-target": "schema",
"object-locator": {
"schema-name": "PERFDATA"
},
"value": "PERFDATA"
}
For more information about transformations, see Selection and Transformation Table Mapping using
.
API Version API Version 2016-01-01
41
AWS Database Migration Service User Guide
IAM Permissions Needed to Use AWS DMS
Security
AWS Database Migration Service (AWS DMS) uses several processes to secure your data during migration.
The service encrypts the storage used by your replication instance and the endpoint connection information using an AWS Key Management Service (AWS KMS) key that is unique to your AWS account.
Secure Sockets Layer (SSL) is supported. AWS Database Migration Service also requires that you have the appropriate permissions if you sign in as an AWS Identity and Access Management (IAM) user.
The VPC based on the Amazon Virtual Private Cloud (Amazon VPC) service that you use with your replication instance must be associated with a security group that has rules that allow all traffic on all ports to leave (egress) the VPC. This approach allows communication from the replication instance to your source and target database endpoints, as long as correct ingress is enabled on those endpoints.
If you want to view database migration logs, you need the appropriate Amazon CloudWatch Logs permissions for the IAM role you are using.
Topics
•
IAM Permissions Needed to Use AWS DMS (p. 42)
•
Creating the IAM Roles to Use With the AWS CLI and AWS DMS API (p. 44)
•
Fine-grained Access Control Using Resource Names and Tags (p. 47)
•
Setting an Encryption Key and Specifying KMS Permissions (p. 54)
•
Network Security for AWS Database Migration Service (p. 55)
•
Using SSL With AWS Database Migration Service (p. 56)
•
Changing the Database Password (p. 63)
IAM Permissions Needed to Use AWS DMS
You need to use certain IAM permissions and IAM roles to use AWS DMS. If you are signed in as an IAM user and want to use AWS DMS, your account administrator must attach the following policy to the IAM user, group, or role that you use to run AWS DMS. For more information about IAM permissions, see the
IAM User Guide
.
The following set of permissions gives you access to AWS DMS, and also permissions for certain actions needed from other Amazon services such as AWS KMS, IAM, Amazon Elastic Compute Cloud (Amazon
EC2), and Amazon CloudWatch. CloudWatch monitors your AWS DMS migration in real time and collects and tracks metrics that indicate the progress of your migration. You can use CloudWatch Logs to debug problems with a task.
{
API Version API Version 2016-01-01
42
AWS Database Migration Service User Guide
IAM Permissions Needed to Use AWS DMS
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Action": "dms:*",
"Resource": "*"
},
{
"Effect": "Allow",
"Action": [
"kms:ListAliases",
"kms:DescribeKey"
],
"Resource": "*"
},
{
"Effect": "Allow",
"Action": [
"iam:GetRole",
"iam:PassRole",
"iam:CreateRole",
"iam:AttachRolePolicy"
],
"Resource": "*"
},
{
"Effect": "Allow",
"Action": [
"ec2:DescribeVpcs",
"ec2:DescribeInternetGateways",
"ec2:DescribeAvailabilityZones",
"ec2:DescribeSubnets",
"ec2:DescribeSecurityGroups",
"ec2:ModifyNetworkInterfaceAttribute",
"ec2:CreateNetworkInterface",
"ec2:DeleteNetworkInterface"
],
"Resource": "*"
},
{
"Effect": "Allow",
"Action": [
"cloudwatch:Get*",
"cloudwatch:List*"
],
"Resource": "*"
},
{
"Effect": "Allow",
"Action": [
"logs:DescribeLogGroups",
"logs:DescribeLogStreams",
"logs:FilterLogEvents",
"logs:GetLogEvents"
],
"Resource": "*"
},
{
"Effect": "Allow",
"Action": [
"redshift:Describe*",
"redshift:ModifyClusterIamRoles"
],
"Resource": "*"
}
]
API Version API Version 2016-01-01
43
AWS Database Migration Service User Guide
Creating the IAM Roles to Use With the AWS CLI and AWS DMS API
}
The AWS DMS console creates several roles that are automatically attached to your AWS account when you use the AWS DMS console. If you use the AWS Command Line Interface (AWS CLI) or the AWS DMS
API for your migration, you need to add these roles to your account. For more information on adding these roles, see
Creating the IAM Roles to Use With the AWS CLI and AWS DMS API (p. 44)
.
Creating the IAM Roles to Use With the AWS CLI and AWS DMS API
If you use the AWS CLI or the AWS DMS API for your database migration, you must add three IAM roles to your AWS account before you can use the features of AWS DMS. Two of these are dms-vpc-role
and dmscloudwatch-logs-role
. If you use Amazon Redshift as a target database, you must also add the IAM role dms-access-for-endpoint
to your AWS account.
Updates to managed policies are automatic. If you are using a custom policy with the IAM roles, be sure to periodically check for updates to the managed policy in this documentation. You can view the details of the managed policy by using a combination of the get-policy
and get-policy-version
commands.
For example, the following get-policy
command retrieves information on the role.
$ aws iam get-policy --policy-arn arn:aws:iam::aws:policy/service-role/
AmazonDMSVPCManagementRole
The information returned from the command is as follows.
{
"Policy": {
"PolicyName": "AmazonDMSVPCManagementRole",
"Description": "Provides access to manage VPC settings for AWS managed customer
configurations",
"CreateDate": "2015-11-18T16:33:19Z",
"AttachmentCount": 1,
"IsAttachable": true,
"PolicyId": "ANPAJHKIGMBQI4AEFFSYO",
"DefaultVersionId": "v3",
"Path": "/service-role/",
"Arn": "arn:aws:iam::aws:policy/service-role/AmazonDMSVPCManagementRole",
"UpdateDate": "2016-05-23T16:29:57Z"
}
}
The following get-policy-version
command retrieves policy information.
$ aws iam get-policy-version --policy-arn arn:aws:iam::aws:policy/service-role/
AmazonDMSVPCManagementRole --version-id v3
The information returned from the command is as follows.
API Version API Version 2016-01-01
44
AWS Database Migration Service User Guide
Creating the IAM Roles to Use With the AWS CLI and AWS DMS API
{
"PolicyVersion": {
"CreateDate": "2016-05-23T16:29:57Z",
"VersionId": "v3",
"Document": {
"Version": "2012-10-17",
"Statement": [
{
"Action": [
"ec2:CreateNetworkInterface",
"ec2:DescribeAvailabilityZones",
"ec2:DescribeInternetGateways",
"ec2:DescribeSecurityGroups",
"ec2:DescribeSubnets",
"ec2:DescribeVpcs",
"ec2:DeleteNetworkInterface",
"ec2:ModifyNetworkInterfaceAttribute"
],
"Resource": "*",
"Effect": "Allow"
}
]
},
"IsDefaultVersion": true
}
}
The same commands can be used to get information on the
AmazonDMSCloudWatchLogsRole
and the
AmazonDMSRedshiftS3Role
managed policy.
Note
If you use the AWS DMS console for your database migration, these roles are added to your AWS account automatically.
The following procedures create the dms-vpc-role
, dms-cloudwatch-logs-role
, and dms-access-forendpoint
IAM roles.
To create the
dms-vpc-role
IAM role for use with the AWS CLI or AWS DMS API
1. Create a JSON file with the IAM policy following. Name the JSON file dmsAssumeRolePolicyDocument.json
.
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Principal": {
"Service": "dms.amazonaws.com"
},
"Action": "sts:AssumeRole"
}
]
}
Create the role using the AWS CLI using the following command.
API Version API Version 2016-01-01
45
AWS Database Migration Service User Guide
Creating the IAM Roles to Use With the AWS CLI and AWS DMS API aws iam create-role --role-name dms-vpc-role --assume-role-policy-document file:// dmsAssumeRolePolicyDocument.json’
2. Attach the
AmazonDMSVPCManagementRole
policy to dms-vpc-role
using the following command.
aws iam attach-role-policy --role-name dms-vpc-role --policy-arn
arn:aws:iam::aws:policy/service-role/AmazonDMSVPCManagementRole
To create the
dms-cloudwatch-logs-role
IAM role for use with the AWS CLI or AWS DMS API
1. Create a JSON file with the IAM policy following. Name the JSON file dmsAssumeRolePolicyDocument2.json
.
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Principal": {
"Service": "dms.amazonaws.com"
},
"Action": "sts:AssumeRole"
}
]
}
Create the role using the AWS CLI using the following command.
aws iam create-role --role-name dms-cloudwatch-logs-role --assume-role-policy-document
file://dmsAssumeRolePolicyDocument2.json’
2. Attach the
AmazonDMSCloudWatchLogsRole
policy to dms-cloudwatch-logs-role
using the following command.
aws iam attach-role-policy --role-name dms-cloudwatch-logs-role --policy-arn
arn:aws:iam::aws:policy/service-role/AmazonDMSCloudWatchLogsRole
If you use Amazon Redshift as your target database, you must create the IAM role dms-access-forendpoint
to provide access to Amazon S3 (S3).
To create the
dms-access-for-endpoint
IAM role for use with Amazon Redshift as a target database
1. Create a JSON file with the IAM policy following. Name the JSON file dmsAssumeRolePolicyDocument3.json
.
{
API Version API Version 2016-01-01
46
AWS Database Migration Service User Guide
Fine-grained Access Control
Using Resource Names and Tags
"Version": "2012-10-17",
"Statement": [
{
"Sid": "1",
"Effect": "Allow",
"Principal": {
"Service": "dms.amazonaws.com"
},
"Action": "sts:AssumeRole"
},
{
"Sid": "2",
"Effect": "Allow",
"Principal": {
"Service": "redshift.amazonaws.com"
},
"Action": "sts:AssumeRole"
}
]
}
2. Create the role using the AWS CLI using the following command.
aws iam create-role --role-name dms-access-for-endpoint --assume-role-policy-document
file://dmsAssumeRolePolicyDocument3.json
3. Attach the
AmazonDMSRedshiftS3Role
policy to dms-access-for-endpoint
role using the following command.
aws iam attach-role-policy --role-name dms-access-for-endpoint --policy-arn
arn:aws:iam::aws:policy/service-role/AmazonDMSRedshiftS3Role
You should now have the IAM policies in place to use the AWS CLI or AWS DMS API.
Fine-grained Access Control Using Resource Names and Tags
You can use ARN-based resource names and resource tags to manage access to AWS DMS resources. You do this by defining permitted action or including conditional statements in IAM policies.
Using Resource Names to Control Access
You can create an IAM user account and assign a policy based on the AWS DMS resource's Amazon
Resource Name (ARN).
The following policy denies access to the AWS DMS replication instance with the ARN arn:aws:dms:us-
east-1:152683116:rep:DOH67ZTOXGLIXMIHKITV:
{
"Version": "2012-10-17",
API Version API Version 2016-01-01
47
AWS Database Migration Service User Guide
Using Resource Names to Control Access
"Statement": [
{
"Action": [
"dms:*"
],
"Effect": "Deny",
"Resource": "arn:aws:dms:us-east-1:152683116:rep:DOH67ZTOXGLIXMIHKITV"
}
]
}
For example, the following commands would fail when the policy is in effect:
$ /apollo/env/AmazonAwsCli/bin/aws dms delete-replication-instance
--replication-instance-arn "arn:aws:dms:us-east-1:152683116:rep:DOH67ZTOXGLIXMIHKITV"
A client error (AccessDeniedException) occurred when calling the DeleteReplicationInstance operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:DeleteReplicationInstance on resource: arn:aws:dms:useast-1:152683116:rep:DOH67ZTOXGLIXMIHKITV
$ /apollo/env/AmazonAwsCli/bin/aws dms modify-replication-instance
--replication-instance-arn "arn:aws:dms:us-east-1:152683116:rep:DOH67ZTOXGLIXMIHKITV"
A client error (AccessDeniedException) occurred when calling the ModifyReplicationInstance operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:ModifyReplicationInstance on resource: arn:aws:dms:useast-1:152683116:rep:DOH67ZTOXGLIXMIHKITV
You can also specify IAM policies that limit access to AWS DMS endpoints and replication tasks.
The following policy limits access to an AWS DMS endpoint using the endpoint's ARN:
{
"Version": "2012-10-17",
"Statement": [
{
"Action": [
"dms:*"
],
"Effect": "Deny",
"Resource": "arn:aws:dms:us-east-1:152683116:endpoint:D6E37YBXTNHOA6XRQSZCUGX"
}
]
}
For example, the following commands would fail when the policy using the endpoint's ARN is in effect:
$ /apollo/env/AmazonAwsCli/bin/aws dms delete-endpoint
--endpoint-arn "arn:aws:dms:us-east-1:152683116:endpoint:D6E37YBXTNHOA6XRQSZCUGX"
A client error (AccessDeniedException) occurred when calling the DeleteEndpoint operation:
User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform:
dms:DeleteEndpoint on resource: arn:aws:dms:us-east-1:152683116:endpoint:D6E37YBXTNHOA6XRQSZCUGX
API Version API Version 2016-01-01
48
AWS Database Migration Service User Guide
Using Tags to Control Access
$ /apollo/env/AmazonAwsCli/bin/aws dms modify-endpoint
--endpoint-arn "arn:aws:dms:us-east-1:152683116:endpoint:D6E37YBXTNHOA6XRQSZCUGX"
A client error (AccessDeniedException) occurred when calling the ModifyEndpoint operation:
User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform:
dms:ModifyEndpoint on resource: arn:aws:dms:us-east-1:152683116:endpoint:D6E37YBXTNHOA6XRQSZCUGX
The following policy limits access to an AWS DMS task using the task's ARN:
{
"Version": "2012-10-17",
"Statement": [
{
"Action": [
"dms:*"
],
"Effect": "Deny",
"Resource": "arn:aws:dms:us-east-1:152683116:task:UO3YR4N47DXH3ATT4YMWOIT"
}
]
}
For example, the following commands would fail when the policy using the task's ARN is in effect:
$ /apollo/env/AmazonAwsCli/bin/aws dms delete-replication-task
--replication-task-arn "arn:aws:dms:us-east-1:152683116:task:UO3YR4N47DXH3ATT4YMWOIT"
A client error (AccessDeniedException) occurred when calling the DeleteReplicationTask
operation:
User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform:
dms:DeleteReplicationTask on resource: arn:aws:dms:us-east-1:152683116:task:UO3YR4N47DXH3ATT4YMWOIT
Using Tags to Control Access
AWS DMS defines a set of common key/value pairs that are available for use in customer defined policies without any additional tagging requirements. For more information about tagging AWS DMS resources,
see Tagging AWS Database Migration Service Resources (p. 14)
.
The following lists the standard tags available for use with AWS DMS:
• aws:CurrentTime – Represents the request date and time, allowing the restriction of access based on temporal criteria.
• aws:EpochTime – This tag is similar to the aws:CurrentTime tag above, except that the current time is represented as the number of seconds elapsed since the Unix Epoch.
• aws:MultiFactorAuthPresent – This is a boolean tag that indicates whether or not the request was signed via multi-factor authentication.
• aws:MultiFactorAuthAge – Provides access to the age of the multi-factor authentication token (in seconds).
• aws:principaltype - Provides access to the type of principal (user, account, federated user, etc.) for the current request.
• aws:SourceIp - Represents the source ip address for the user issuing the request.
API Version API Version 2016-01-01
49
AWS Database Migration Service User Guide
Using Tags to Control Access
• aws:UserAgent – Provides information about the client application requesting a resource.
• aws:userid – Provides access to the ID of the user issuing the request.
• aws:username – Provides access to the name of the user issuing the request.
• dms:InstanceClass – Provides access to the compute size of the replication instance host(s).
• dms:StorageSize - Provides access to the storage volume size (in GB).
You can also define your own tags. Customer-defined tags are simple key/value pairs that are persisted in the AWS Tagging service and can be added to AWS DMS resources, including replication instances, endpoints, and tasks. These tags are matched via IAM “Conditional” statements in policies, and are referenced using a specific conditional tag. The tag keys are prefixed with "dms", the resource type, and the "tag" prefix. The following shows the tag format: dms:{resource type}-tag/{tag key}={tag value}
For example, suppose you want to define a policy that only allows an API call to succeed for a replication instance that contains the tag “stage=production”. The following conditional statement would match a resource with the given tag:
"Condition":
{
"streq":
{
"dms:rep-tag/stage":"production"
}
}
You would add the following tag to a replication instance that would match this policy condition: stage production
In addition to tags already assigned to AWS DMS resources, policies can also be written to limit the tag keys and values that may be applied to a given resource. In this case, the tag prefix would be "req".
For example, the following policy statement would limit the tags that a user can assign to a given resource to a specific list of allowed values:
"Condition":
{
"streq":
{
"dms:req-tag/stage": [ "production", "development", "testing" ]
}
}
The following policy examples limit access to an AWS DMS resource based on resource tags.
The following policy limits access to a replication instance where the tag value is "Desktop" and the tag key is "Env":
{
"Version": "2012-10-17",
"Statement": [
{
"Action": [
"dms:*"
API Version API Version 2016-01-01
50
AWS Database Migration Service User Guide
Using Tags to Control Access
],
"Effect": "Deny",
"Resource": "*",
"Condition": {
"StringEquals": {
"dms:rep-tag/Env": [
"Desktop"
]
}
}
}
]
}
The following commands succeed or fail based on the IAM policy that restricts access when the tag value is "Desktop" and the tag key is "Env":
$ /apollo/env/AmazonAwsCli/bin/aws dms list-tags-for-resource
--resource-name arn:aws:dms:us-east-1:152683116:rep:46DHOU7JOJYOJXWDOZNFEN
--endpoint-url http://localhost:8000
{
"TagList": [
{
"Value": "Desktop",
"Key": "Env"
}
]
}
$ /apollo/env/AmazonAwsCli/bin/aws dms delete-replication-instance
--replication-instance-arn "arn:aws:dms:us-east-1:152683116:rep:46DHOU7JOJYOJXWDOZNFEN"
A client error (AccessDeniedException) occurred when calling the DeleteReplicationInstance operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:DeleteReplicationInstance on resource: arn:aws:dms:useast-1:152683116:rep:46DHOU7JOJYOJXWDOZNFEN
$ /apollo/env/AmazonAwsCli/bin/aws dms modify-replication-instance
--replication-instance-arn "arn:aws:dms:us-east-1:152683116:rep:46DHOU7JOJYOJXWDOZNFEN"
A client error (AccessDeniedException) occurred when calling the ModifyReplicationInstance operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:ModifyReplicationInstance on resource: arn:aws:dms:useast-1:152683116:rep:46DHOU7JOJYOJXWDOZNFEN
$ /apollo/env/AmazonAwsCli/bin/aws dms add-tags-to-resource
--resource-name arn:aws:dms:us-east-1:152683116:rep:46DHOU7JOJYOJXWDOZNFEN
--tags Key=CostCenter,Value=1234
A client error (AccessDeniedException) occurred when calling the AddTagsToResource operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:AddTagsToResource on resource: arn:aws:dms:useast-1:152683116:rep:46DHOU7JOJYOJXWDOZNFEN
$ /apollo/env/AmazonAwsCli/bin/aws dms remove-tags-from-resource
--resource-name arn:aws:dms:us-east-1:152683116:rep:46DHOU7JOJYOJXWDOZNFEN
--tag-keys Env
A client error (AccessDeniedException) occurred when calling the RemoveTagsFromResource operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:RemoveTagsFromResource on resource: arn:aws:dms:useast-1:152683116:rep:46DHOU7JOJYOJXWDOZNFEN
API Version API Version 2016-01-01
51
AWS Database Migration Service User Guide
Using Tags to Control Access
The following policy limits access to a AWS DMS endpoint where the tag value is "Desktop" and the tag key is "Env":
{
"Version": "2012-10-17",
"Statement": [
{
"Action": [
"dms:*"
],
"Effect": "Deny",
"Resource": "*",
"Condition": {
"StringEquals": {
"dms:endpoint-tag/Env": [
"Desktop"
]
}
}
}
]
}
The following commands succeed or fail based on the IAM policy that restricts access when the tag value is "Desktop" and the tag key is "Env":
$ /apollo/env/AmazonAwsCli/bin/aws dms list-tags-for-resource
--resource-name arn:aws:dms:us-east-1:152683116:endpoint:J2YCZPNGOLFY52344IZWA6I
{
"TagList": [
{
"Value": "Desktop",
"Key": "Env"
}
]
}
$ /apollo/env/AmazonAwsCli/bin/aws dms delete-endpoint
--endpoint-arn "arn:aws:dms:us-east-1:152683116:endpoint:J2YCZPNGOLFY52344IZWA6I"
A client error (AccessDeniedException) occurred when calling the DeleteEndpoint operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:DeleteEndpoint on resource: arn:aws:dms:useast-1:152683116:endpoint:J2YCZPNGOLFY52344IZWA6I
$ /apollo/env/AmazonAwsCli/bin/aws dms modify-endpoint
--endpoint-arn "arn:aws:dms:us-east-1:152683116:endpoint:J2YCZPNGOLFY52344IZWA6I"
A client error (AccessDeniedException) occurred when calling the ModifyEndpoint operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:ModifyEndpoint on resource: arn:aws:dms:useast-1:152683116:endpoint:J2YCZPNGOLFY52344IZWA6I
$ /apollo/env/AmazonAwsCli/bin/aws dms add-tags-to-resource
--resource-name arn:aws:dms:us-east-1:152683116:endpoint:J2YCZPNGOLFY52344IZWA6I
--tags Key=CostCenter,Value=1234
A client error (AccessDeniedException) occurred when calling the AddTagsToResource operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:AddTagsToResource on resource: arn:aws:dms:useast-1:152683116:endpoint:J2YCZPNGOLFY52344IZWA6I
API Version API Version 2016-01-01
52
AWS Database Migration Service User Guide
Using Tags to Control Access
$ /apollo/env/AmazonAwsCli/bin/aws dms remove-tags-from-resource
--resource-name arn:aws:dms:us-east-1:152683116:endpoint:J2YCZPNGOLFY52344IZWA6I
--tag-keys Env
A client error (AccessDeniedException) occurred when calling the RemoveTagsFromResource operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:RemoveTagsFromResource on resource: arn:aws:dms:useast-1:152683116:endpoint:J2YCZPNGOLFY52344IZWA6I
The following policy limits access to a replication task where the tag value is "Desktop" and the tag key is
"Env":
{
"Version": "2012-10-17",
"Statement": [
{
"Action": [
"dms:*"
],
"Effect": "Deny",
"Resource": "*",
"Condition": {
"StringEquals": {
"dms:task-tag/Env": [
"Desktop"
]
}
}
}
]
}
The following commands succeed or fail based on the IAM policy that restricts access when the tag value is "Desktop" and the tag key is "Env":
$ /apollo/env/AmazonAwsCli/bin/aws dms list-tags-for-resource
--resource-name arn:aws:dms:us-east-1:152683116:task:RB7N24J2XBUPS3RFABZTG3
{
"TagList": [
{
"Value": "Desktop",
"Key": "Env"
}
]
}
$ /apollo/env/AmazonAwsCli/bin/aws dms delete-replication-task
--replication-task-arn "arn:aws:dms:us-east-1:152683116:task:RB7N24J2XBUPS3RFABZTG3"
A client error (AccessDeniedException) occurred when calling the DeleteReplicationTask operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:DeleteReplicationTask on resource: arn:aws:dms:useast-1:152683116:task:RB7N24J2XBUPS3RFABZTG3
$ /apollo/env/AmazonAwsCli/bin/aws dms add-tags-to-resource
--resource-name arn:aws:dms:us-east-1:152683116:task:RB7N24J2XBUPS3RFABZTG3
--tags Key=CostCenter,Value=1234
API Version API Version 2016-01-01
53
AWS Database Migration Service User Guide
Setting an Encryption Key
A client error (AccessDeniedException) occurred when calling the AddTagsToResource operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:AddTagsToResource on resource: arn:aws:dms:useast-1:152683116:task:RB7N24J2XBUPS3RFABZTG3
$ /apollo/env/AmazonAwsCli/bin/aws dms remove-tags-from-resource
--resource-name arn:aws:dms:us-east-1:152683116:task:RB7N24J2XBUPS3RFABZTG3
--tag-keys Env
A client error (AccessDeniedException) occurred when calling the RemoveTagsFromResource operation: User: arn:aws:iam::152683116:user/dmstestusr is not authorized to perform: dms:RemoveTagsFromResource on resource: arn:aws:dms:useast-1:152683116:task:RB7N24J2XBUPS3RFABZTG3
Setting an Encryption Key and Specifying KMS
Permissions
AWS DMS encrypts the storage used by a replication instance and the endpoint connection information.
To encrypt the storage used by a replication instance, AWS DMS uses an AWS Key Management Service
(KMS) key that is unique to your AWS account. You can view and manage this key with KMS. You can use the default KMS key in your account ( aws/dms
) or you can create a custom KMS key. If you have an existing KMS key, you can also use that key for encryption.
The default KMS key ( aws/dms
) is created when you first launch a replication instance and you have not selected a custom KMS master key from the Advanced section of the Create Replication Instance page.
If you use the default KMS key, the only permissions you need to grant to the IAM user account you are using for migration are kms:ListAliases
and kms:DescribeKey
. For more information about using the default KMS key, see
IAM Permissions Needed to Use AWS DMS (p. 42) .
To use a custom KMS key, assign permissions for the custom KMS key using one of the following options.
• Add the IAM user account used for the migration as a Key Administrator/Key User for the KMS custom key. This will ensure that necessary KMS permissions are granted to the IAM user account. Note that this action is in addition to the IAM permissions that you must grant to the IAM user account to use
AWS DMS. For more information about granting permissions to a key user, see Allows Key Users to
Use the CMK .
• If you do not want to add the IAM user account as a Key Administrator/Key User for your custom KMS key, then add the following additional permissions to the IAM permissions that you must grant to the
IAM user account to use AWS DMS.
{
"Effect": "Allow",
"Action": [
"kms:ListAliases",
"kms:DescribeKey",
"kms:CreateGrant",
"kms:Encrypt",
"kms:ReEncrypt*"
],
"Resource": "*"
},
API Version API Version 2016-01-01
54
AWS Database Migration Service User Guide
Network Security for AWS Database Migration Service
AWS DMS does not work with KMS Key Aliases, but you can use the KMS key's Amazon Resource Number
(ARN) when specifying the KMS key information. For more information on creating your own KMS keys and giving users access to a KMS key, see the
KMS Developer Guide
.
If you don't specify a KMS key identifier, then AWS DMS uses your default encryption key. KMS creates the default encryption key for AWS DMS for your AWS account. Your AWS account has a different default encryption key for each AWS region.
To manage the KMS keys used for encrypting your AWS DMS resources, you use KMS. You can find
KMS in the AWS Management Console by choosing Identity & Access Management on the console home page and then choosing Encryption Keys on the navigation pane. KMS combines secure, highly available hardware and software to provide a key management system scaled for the cloud. Using KMS, you can create encryption keys and define the policies that control how these keys can be used. KMS supports AWS CloudTrail, so you can audit key usage to verify that keys are being used appropriately.
Your KMS keys can be used in combination with AWS DMS and supported AWS services such as Amazon
RDS, Amazon Simple Storage Service (Amazon S3), Amazon Redshift, and Amazon Elastic Block Store
(Amazon EBS).
Once you have created your AWS DMS resources with the KMS key, you cannot change the encryption key for those resources. Make sure to determine your encryption key requirements before you create your AWS DMS resources.
Network Security for AWS Database Migration
Service
The security requirements for the network you create when using AWS Database Migration Service depend on how you configure the network. The general rules for network security for AWS DMS are as follows:
• The replication instance must have access to the source and target endpoints. The security group for the replication instance must have network ACLs or rules that allow egress from the instance out on the database port to the database endpoints.
• Database endpoints must include network ACLs and security group rules that allow incoming access from the replication instance. You can achieve this using the replication instance's security group, the private IP address, the public IP address, or the NAT gateway’s public address, depending on your configuration.
• If your network uses a VPN Tunnel, the EC2 instance acting as the NAT Gateway must use a security group that has rules that allow the replication instance to send traffic through it.
By default, the VPC security group used by the AWS DMS replication instance has rules that allow egress to 0.0.0.0/0 on all ports. If you modify this security group or use your own security group, egress must, at a minimum, be permitted to the source and target endpoints on the respective database ports.
The network configurations you can use for database migration each require specific security considerations:
•
Configuration with All Database Migration Components in One VPC (p. 10)
— The security group used by the endpoints must allow ingress on the database port from the replication instance. Ensure that the security group used by the replication instance has ingress to the endpoints, or you can create a rule in the security group used by the endpoints that allows the private IP address of the replication instance access.
•
Configuration with Two VPCs (p. 10)
— The security group used by the replication instance must have a rule for the VPC range and the DB port on the database.
API Version API Version 2016-01-01
55
AWS Database Migration Service User Guide
Using SSL With AWS Database Migration Service
•
Configuration for a Network to a VPC Using AWS Direct Connect or a VPN (p. 11)
— a VPN tunnel allowing traffic to tunnel from the VPC into an on- premises VPN. In this configuration, the VPC includes a routing rule that sends traffic destined for a specific IP address or range to a host that can bridge traffic from the VPC into the on-premises VPN. If this case, the NAT host includes its own
Security Group settings that must allow traffic from the Replication Instance’s private IP address or security group into the NAT instance.
•
Configuration for a Network to a VPC Using the Internet (p. 11) — The VPC security group must
include routing rules that send traffic not destined for the VPC to the Internet gateway. In this configuration, the connection to the endpoint appears to come from the public IP address on the replication instance.
•
Configuration with an Amazon RDS DB instance not in a VPC to a DB instance in a VPC Using
ClassicLink (p. 11) — When the source or target Amazon RDS DB instance is not in a VPC and does not
share a security group with the VPC where the replication instance is located, you can setup a proxy server and use ClassicLink to connect the source and target databases.
• Source endpoint is outside the VPC used by the replication instance and uses a NAT gateway — You can configure a network address translation (NAT) gateway using a single Elastic IP Address bound to a single Elastic Network Interface, which then receives a NAT identifier (nat-#####). If the VPC includes a default route to that NAT Gateway instead of the Internet Gateway, the replication instance will instead appear to contact the Database Endpoint using the public IP address of the Internet Gateway.
In this case, the ingress to the Database Endpoint outside the VPC needs to allow ingress from the NAT address instead of the Replication Instance’s public IP Address.
Using SSL With AWS Database Migration Service
You can encrypt connections for source and target endpoints by using Secure Sockets Layer (SSL). To do so, you can use the AWS DMS Management Console or AWS DMS API to assign a certificate to an endpoint. You can also use the AWS DMS console to manage your certificates.
Not all databases use SSL in the same way. Amazon Aurora uses the server name, the endpoint of the primary instance in the cluster, as the endpoint for SSL. An Amazon Redshift endpoint already uses an
SSL connection and does not require an SSL connection set up by AWS DMS. An Oracle endpoint requires
additional steps; for more information, see SSL Support for an Oracle Endpoint (p. 59)
.
Topics
•
Limitations on Using SSL with AWS Database Migration Service (p. 57)
•
•
Enabling SSL for a MySQL-compatible, PostgreSQL, or SQL Server Endpoint (p. 58)
•
SSL Support for an Oracle Endpoint (p. 59)
To assign a certificate to an endpoint, you provide the root certificate or the chain of intermediate
CA certificates leading up to the root (as a certificate bundle), that was used to sign the server SSL certificate that is deployed on your endpoint. Certificates are accepted as PEM formatted X509 files, only.
When you import a certificate, you receive an Amazon Resource Name (ARN) that you can use to specify that certificate for an endpoint. If you use Amazon RDS, you can download the root CA and certificate bundle provided by Amazon RDS at https://s3.amazonaws.com/rds-downloads/rds-combined-cabundle.pem
.
You can choose from several SSL modes to use for your SSL certificate verification.
• none – The connection is not encrypted. This option is not secure, but requires less overhead.
• require – The connection is encrypted. This option is more secure, and requires more overhead.
• verify-ca – The connection is encrypted. This option is more secure, and requires more overhead. This option verifies the server certificate.
API Version API Version 2016-01-01
56
AWS Database Migration Service User Guide
Limitations on Using SSL with
AWS Database Migration Service
• verify-full – The connection is encrypted. This option is more secure, and requires more overhead.
This option verifies the server certificate and verifies that the server hostname matches the hostname attribute for the certificate.
Not all SSL modes work with all database endpoints. The following table shows which SSL modes are supported for each database engine.
SSL Mode none require verify-ca verify-full
MySQL/MariaDB/
Amazon Aurora
Default
Not supported
Supported
Supported
Microsoft
SQL
Server
PostgreSQL Amazon
Redshift
Default Default Default
Supported Supported SSL not enabled
Not
Supported
Supported SSL not enabled
Supported Supported SSL not enabled
Oracle
Default
Not
Supported
SAP ASE
Supported SSL not
Not
Supported
Default
SSL not enabled enabled
Supported
Limitations on Using SSL with AWS Database
Migration Service
• SSL connections to Amazon Redshift target endpoints are not supported. AWS DMS uses an S3 bucket to transfer data to the Redshift database. This transmission is encrypted by Amazon Redshift by default.
• SQL timeouts can occur when performing CDC tasks with SSL-enabled Oracle endpoints. If you have this issue, where CDC counters don't reflect the expected numbers, set the
MinimumTransactionSize parameter from the
ChangeProcessingTuning
section of task settings to a lower value, starting with a value as low as 100. For more information about the
MinimumTransactionSize
Processing Tuning Settings (p. 128)
.
• Certificates can only be imported in the .PEM and .SSO (Oracle wallet) formats.
• If your server SSL certificate is signed by an intermediate CA, make sure the entire certificate chain leading from the intermediate CA up to the root CA is imported as a single .PEM file.
• If you are using self-signed certificates on your server, choose require as your SSL mode. The require
SSL mode implicitly trusts the server’s SSL certificate and will not try to validate that the certificate was signed by a CA.
Managing Certificates
You can use the DMS console to view and manage your SSL certificates. You can also import your certificates using the DMS console.
API Version API Version 2016-01-01
57
AWS Database Migration Service User Guide
Enabling SSL for a MySQL-compatible,
PostgreSQL, or SQL Server Endpoint
Enabling SSL for a MySQL-compatible, PostgreSQL, or SQL Server Endpoint
You can add an SSL connection to a newly created endpoint or to an existing endpoint.
To create an AWS DMS endpoint with SSL
1. Sign in to the AWS Management Console and choose AWS Database Migration Service.
Note
If you are signed in as an AWS Identity and Access Management (IAM) user, you must have the appropriate permissions to access AWS DMS. For more information on the permissions
required for database migration, see IAM Permissions Needed to Use AWS DMS (p. 42) .
2. In the navigation pane, choose Certificates.
3. Choose Import Certificate.
4. Upload the certificate you want to use for encrypting the connection to an endpoint.
Note
You can also upload a certificate using the AWS DMS console when you create or modify an endpoint by selecting Add new CA certificate on the Create database endpoint page.
5. Create an endpoint as described in
Step 3: Specify Database Endpoints (p. 28)
To modify an existing AWS DMS endpoint to use SSL:
1. Sign in to the AWS Management Console and choose AWS Database Migration Service.
Note
If you are signed in as an AWS Identity and Access Management (IAM) user, you must have the appropriate permissions to access AWS DMS. For more information on the permissions
required for database migration, see IAM Permissions Needed to Use AWS DMS (p. 42) .
2. In the navigation pane, choose Certificates.
3. Choose Import Certificate.
4. Upload the certificate you want to use for encrypting the connection to an endpoint.
API Version API Version 2016-01-01
58
AWS Database Migration Service User Guide
SSL Support for an Oracle Endpoint
Note
You can also upload a certificate using the AWS DMS console when you create or modify an endpoint by selecting Add new CA certificate on the Create database endpoint page.
5. In the navigation pane, choose
Endpoints, select the endpoint you want to modify, and choose
Modify.
6. Choose an SSL mode.
If you select either the verify-ca or verify-full mode, you must specify the CA certificate that you want to use, as shown following.
7. Choose Modify.
8. When the endpoint has been modified, select the endpoint and choose
Test connection to determine if the SSL connection is working.
After you create your source and target endpoints, create a task that uses these endpoints. For more
information on creating a task, see Step 4: Create a Task (p. 32) .
SSL Support for an Oracle Endpoint
Oracle endpoints in AWS DMS support none
and verify-ca
SSL modes. To use SSL with an Oracle endpoint, you must upload the Oracle wallet for the endpoint instead of .pem certificate files.
Topics
•
Using an Existing Certificate for Oracle SSL (p. 60)
API Version API Version 2016-01-01
59
AWS Database Migration Service User Guide
SSL Support for an Oracle Endpoint
•
Using a Self-Signed Certificate for Oracle SSL (p. 60)
Using an Existing Certificate for Oracle SSL
To use an existing Oracle client installation to create the Oracle wallet file from the CA certificate file, do the following steps.
To use an existing Oracle client installation for Oracle SSL with AWS DMS
1. Set the ORACLE_HOME system variable to the location of your dbhome_1 directory by running the following command: prompt>export ORACLE_HOME=/home/user/app/user/product/12.1.0/dbhome_1
2. Append $ORACLE_HOME/lib to the LD_LIBRARY_PATH system variable.
prompt>export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
3. Create a directory for the Oracle wallet at $ORACLE_HOME/ssl_wallet.
prompt>mkdir $ORACLE_HOME/ssl_wallet
4. Put the CA certificate .pem file in the ssl_wallet directory. Amazon RDS customers can download the
RDS CA certificates file from https://s3.amazonaws.com/rds-downloads/rds-ca-2015-root.pem
.
5. Run the following commands to create the Oracle wallet: prompt>orapki wallet create -wallet $ORACLE_HOME/ssl_wallet -auto_login_only prompt>orapki wallet add -wallet $ORACLE_HOME/ssl_wallet -trusted_cert –cert
$ORACLE_HOME/ssl_wallet/ca-cert.pem -auto_login_only
When you have completed the steps previous, you can import the wallet file with the ImportCertificate
API by specifying the certificate-wallet parameter. You can then use the imported wallet certificate when you select verify-ca
as the SSL mode when creating or modifying your Oracle endpoint.
Note
Oracle wallets are binary files. AWS DMS accepts these files as-is.
Using a Self-Signed Certificate for Oracle SSL
To use a self-signed certificate for Oracle SSL, do the following.
To use a self-signed certificate for Oracle SSL with AWS DMS
1. Create a directory you will use to work with the self-signed certificate.
mkdir
<SELF_SIGNED_CERT_DIRECTORY>
API Version API Version 2016-01-01
60
AWS Database Migration Service User Guide
SSL Support for an Oracle Endpoint
2. Change into the directory you created in the previous step.
cd
<SELF_SIGNED_CERT_DIRECTORY>
3. Create a root key.
openssl genrsa -out self-rootCA.key 2048
4. Self sign a root certificate using the root key you created in the previous step.
openssl req -x509 -new -nodes -key self-rootCA.key
-sha256 -days 1024 -out self-rootCA.pem
5. Create an Oracle wallet directory for the Oracle database.
mkdir $ORACLE_HOME/self_signed_ssl_wallet
6. Create a new Oracle wallet.
orapki wallet create -wallet $ORACLE_HOME/self_signed_ssl_wallet
-pwd
<password>
-auto_login_local
7. Add the root certificate to the Oracle wallet.
orapki wallet add -wallet $ORACLE_HOME/self_signed_ssl_wallet
-trusted_cert -cert self-rootCA.pem -pwd
<password>
8. List the contents of the Oracle wallet. The list should include the root certificate.
orapki wallet display -wallet $ORACLE_HOME/self_signed_ssl_wallet
9. Generate the Certificate Signing Request (CSR) using the ORAPKI utility.
orapki wallet add -wallet $ORACLE_HOME/self_signed_ssl_wallet
-dn "CN=`hostname`, OU=Sample Department, O=Sample Company,
L=NYC, ST=NY, C=US" -keysize 1024 -pwd
<password>
10. List the contents of the Oracle wallet. The list should include the CSR.
orapki wallet display -wallet $ORACLE_HOME/self_signed_ssl_wallet
11. Export the CSR from the Oracle wallet.
orapki wallet export -wallet $ORACLE_HOME/self_signed_ssl_wallet
-dn "CN=`hostname`, OU=Sample Department, O=Sample Company,
L=NYC, ST=NY, C=US" -request self-signed-oracle.csr -pwd
<password>
12. Sign the CSR using the root certificate.
openssl x509 -req -in self-signed-oracle.csr -CA self-rootCA.pem
-CAkey self-rootCA.key -CAcreateserial -out self-signed-oracle.crt
-days 365 -sha256
13. Add the Client certificate to the server wallet.
orapki wallet add -wallet $ORACLE_HOME/self_signed_ssl_wallet
-user_cert -cert self-signed-oracle.crt -pwd
<password>
API Version API Version 2016-01-01
61
AWS Database Migration Service User Guide
SSL Support for an Oracle Endpoint
14. List the content of the Oracle wallet.
orapki wallet display -wallet $ORACLE_HOME/self_signed_ssl_wallet
15. Configure sqlnet.ora file ($ORACLE_HOME/network/admin/sqlnet.ora).
WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = <ORACLE_HOME>/self_signed_ssl_wallet)
)
)
SQLNET.AUTHENTICATION_SERVICES = (NONE)
SSL_VERSION = 1.0
SSL_CLIENT_AUTHENTICATION = FALSE
SSL_CIPHER_SUITES = (SSL_RSA_WITH_AES_256_CBC_SHA)
16. Stop the Oracle listener.
lsnrctl stop
17. Add entries for SSL in the listener.ora file (($ORACLE_HOME/network/admin/listener.ora).
SSL_CLIENT_AUTHENTICATION = FALSE
WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = <ORACLE_HOME>/self_signed_ssl_wallet)
)
)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = <SID>)
(ORACLE_HOME = <ORACLE_HOME>)
(SID_NAME = <SID>)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCPS)(HOST = localhost.localdomain)(PORT = 1522))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
)
18. Configure the tnsnames.ora file ($ORACLE_HOME/network/admin/tnsnames.ora).
<SID>=
(DESCRIPTION=
(ADDRESS_LIST =
(ADDRESS=(PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = <SID>)
API Version API Version 2016-01-01
62
AWS Database Migration Service User Guide
Changing the Database Password
)
)
<SID>_ssl=
(DESCRIPTION=
(ADDRESS_LIST =
(ADDRESS=(PROTOCOL = TCPS)(HOST = localhost.localdomain)(PORT = 1522))
)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = <SID>)
)
)
19. Restart the Oracle listener.
lsnrctl start
20. Show the Oracle listener status.
lsnrctl status
21. Test the SSL connection to the database from localhost using sqlplus and the SSL tnsnames entry.
sqlplus -L
<ORACLE_USER>
@
<SID>
_ssl
22. Verify that you successfully connected using SSL.
SELECT SYS_CONTEXT('USERENV', 'network_protocol') FROM DUAL;
SYS_CONTEXT('USERENV','NETWORK_PROTOCOL')
-------------------------------------------------------------------------------tcps
23. Change directory to the directory with the self-signed certificate.
cd <SELF_SIGNED_CERT_DIRECTORY>
24. Create a new client Oracle wallet that AWS DMS will use.
orapki wallet create -wallet ./ -auto_login_only
25. Add the self-signed root certificate to the Oracle wallet.
orapki wallet add -wallet ./ -trusted_cert -cert rootCA.pem -auto_login_only
26. List the contents of the Oracle wallet that AWS DMS will use. The list should include the self-signed root certificate.
orapki wallet display -wallet ./
27. Upload the Oracle wallet you just created to AWS DMS.
Changing the Database Password
In most situations, changing the database password for your source or target endpoint is straightforward. If you need to change the database password for an endpoint that you are currently
API Version API Version 2016-01-01
63
AWS Database Migration Service User Guide
Changing the Database Password using in a migration or replication task, the process is slightly more complex. The procedure following shows how to do this.
To change the database password for an endpoint in a migration or replication task
1. Sign in to the AWS Management Console and choose AWS DMS. Note that if you are signed in as an AWS Identity and Access Management (IAM) user, you must have the appropriate permissions to access AWS DMS. For more information on the permissions required, see
.
2. In the navigation pane, choose Tasks.
3. Choose the task that uses the endpoint you want to change the database password for, and then choose Stop.
4. While the task is stopped, you can change the password of the database for the endpoint using the native tools you use to work with the database.
5. Return to the DMS Management Console and choose Endpoints from the navigation pane.
6. Choose the endpoint for the database you changed the password for, and then choose Modify.
7. Type the new password in the Password box, and then choose Modify.
8. Choose Tasks from the navigation pane.
9. Choose the task that you stopped previously, and choose Start/Resume.
10. Choose either Start or Resume, depending on how you want to continue the task, and then choose
Start task.
API Version API Version 2016-01-01
64
AWS Database Migration Service User Guide
Limits for AWS Database Migration Service
Limits for AWS Database Migration
Service
This topic describes the resource limits and naming constraints for AWS Database Migration Service (AWS
DMS).
The maximum size of a database that AWS DMS can migrate depends on your source environment, the distribution of data in your source database, and how busy your source system is. The best way to determine whether your particular system is a candidate for AWS DMS is to test it out. Start slowly so you can get the configuration worked out, then add some complex objects, and finally, attempt a full load as a test.
Limits for AWS Database Migration Service
Each AWS account has limits, per region, on the number of AWS DMS resources that can be created. Once a limit for a resource has been reached, additional calls to create that resource will fail with an exception.
The 6 TB limit for storage applies to the DMS replication instance. This storage is used to cache changes if the target cannot keep up with the source and for storing log information. This limit does not apply to the target size; target endpoints can be larger than 6 TB.
The following table lists the AWS DMS resources and their limits per region.
Resource
Replication instances
Total amount of storage
Event subscriptions
Replication subnet groups
Subnets per replication subnet group
Endpoints
Tasks
20
20
100
200
Default Limit
20
6 TB
100
API Version API Version 2016-01-01
65
Resource
Endpoints per instance
AWS Database Migration Service User Guide
Limits for AWS Database Migration Service
Default Limit
20
API Version API Version 2016-01-01
66
AWS Database Migration Service User Guide
Sources for Data Migration
AWS Database Migration Service (AWS DMS) can use many of the most popular databases as a source for data replication. The source can be on an Amazon Elastic Compute Cloud (Amazon EC2) instance, an
Amazon Relational Database Service (Amazon RDS) instance, or an on-premises database. The source databases include the following.
On-premises and Amazon EC2 instance databases
• Oracle versions 10.2 and later, 11g, and up to 12.1, for the Enterprise, Standard, Standard One, and
Standard Two editions
• Microsoft SQL Server versions 2005, 2008, 2008R2, 2012, and 2014, for the Enterprise, Standard,
Workgroup, and Developer editions. The Web and Express editions are not supported.
• MySQL versions 5.5, 5.6, and 5.7
• MariaDB (supported as a MySQL-compatible data source)
• PostgreSQL 9.3 and later
• SAP Adaptive Server Enterprise (ASE) 15.7 and later
• MongoDB versions 2.6.x and 3.x and later
Amazon RDS instance databases
• Oracle versions 11g (versions 11.2.0.3.v1 and later), and 12c, for the Enterprise, Standard, Standard
One, and Standard Two editions
• Microsoft SQL Server versions 2008R2, 2012, and 2014, for the Enterprise and Standard editions. Note that change data capture (CDC) operations are not supported. The Web, Workgroup, Developer, and
Express editions are not supported.
• MySQL versions 5.5, 5.6, and 5.7. Note that Change Data Capture (CDC) is only supported for versions
5.6 and later.
• PostgreSQL 9.4 and later. Note that Change Data Capture (CDC) is only supported for versions 9.4.9
and higher and 9.5.4 and higher. The rds.logical_replication
parameter, which is required for CDC, is supported only in these versions and later.
• MariaDB (supported as a MySQL-compatible data source)
• Amazon Aurora (supported as a MySQL-compatible data source)
Topics
API Version API Version 2016-01-01
67
AWS Database Migration Service User Guide
Using Oracle as a Source
•
Using an Oracle Database as a Source for AWS Database Migration Service (p. 68)
•
Using a Microsoft SQL Server Database as a Source for AWS Database Migration Service (p. 76)
•
Using a PostgreSQL Database as a Source for AWS Database Migration Service (p. 80)
•
Using a MySQL-Compatible Database as a Source for AWS Database Migration Service (p. 85)
•
Using a SAP ASE Database as a Source for AWS Database Migration Service (p. 88)
•
Using MongoDB as a Source for AWS Database Migration Service (p. 90)
Using an Oracle Database as a Source for AWS
Database Migration Service
You can migrate data from one or many Oracle databases using AWS Database Migration Service (AWS
DMS). With an Oracle database as a source, you can migrate data to either another Oracle database or one of the other supported databases.
AWS DMS supports as a migration source all Oracle database editions for versions 10.2 and later, 11g, and up to 12.1 on an on-premises or EC2 instance, and all Oracle database editions for versions 11g
(versions 11.2.0.3.v1 and later) and up to 12.1 for an Amazon RDS DB instance. An Oracle account with the specific access privileges is required.
You can use SSL to encrypt connections between your Oracle endpoint and the replication instance. For more information on using SSL with an Oracle endpoint, see
Using SSL With AWS Database Migration
.
If you plan to use change data capture (CDC) from your Oracle database, you need to set up supplemental logging. For information on setting up supplemental logging, see
For additional details on working with Oracle databases and AWS DMS, see the following sections.
Topics
•
Using Oracle LogMiner or Oracle Binary Reader for Change Data Capture (CDC) (p. 68)
•
Limitations on Using Oracle as a Source for AWS Database Migration Service (p. 71)
•
Supported Compression Methods (p. 71)
•
User Account Privileges Required for Using Oracle as a Source for AWS Database Migration
•
Configuring Oracle as a Source (p. 73)
•
Configuring Oracle on an Amazon RDS DB Instance as a Source (p. 74)
Using Oracle LogMiner or Oracle Binary Reader for
Change Data Capture (CDC)
Oracle offers two methods for reading the logs when doing change processing: Oracle LogMiner and
Oracle Binary Reader.
By default, AWS DMS uses Oracle LogMiner for change data capture (CDC). Alternatively, you can choose to use the Oracle Binary Reader. The Oracle Binary Reader bypasses LogMiner and reads the logs directly.
To enable the Binary Reader, you need to modify your source connection to include the following extra connection parameters:
API Version API Version 2016-01-01
68
AWS Database Migration Service User Guide
Using Oracle LogMiner or Oracle Binary
Reader for Change Data Capture (CDC) useLogminerReader=N; useBfile=Y
To enable Logminer, you need to modify your source connection to include the following extra connection parameter or leave the Extra Connection Attribute blank (Logminer is the default): useLogminerReader=Y
To use LogMiner or Binary Reader, you must set the correct permissions. For information on setting these permissions, see the following section,
Access Privileges Required for Change Data Capture (CDC) on an
Oracle Source Database (p. 69)
The advantages to using LogMiner with AWS DMS, instead of Binary Reader, include the following:
• LogMiner supports most Oracle options, such as encryption options and compression options. Binary
Reader doesn't support all Oracle options, in particular options for encryption and compression.
• LogMiner offers a simpler configuration, especially compared to Oracle Binary Reader's direct access setup or if the redo logs are on Automatic Storage Management (ASM).
• LogMiner can be used with Oracle sources that use Oracle transparent data encryption (TDE).
The advantages to using Binary Reader with AWS DMS, instead of LogMiner, include the following:
• For migrations with a high volume of changes, LogMiner might have some I/O or CPU impact on the computer hosting the Oracle source database. Binary Reader has less chance of having I/O or CPU impact.
• For migrations with a high volume of changes, CDC performance is usually much better when using
Binary Reader compared with using Oracle LogMiner.
• Binary Reader supports CDC for LOBS in Oracle version 12c. LogMiner does not.
In general, use Oracle LogMiner for migrating your Oracle database unless you have one of the following situations:
• You need to run several migration tasks on the source Oracle database.
• The volume of changes or the REDO log volume on the source Oracle database is large.
• You need to propagate changes to LOBs in Oracle 12c.
Access Privileges Required for Change Data Capture (CDC) on an
Oracle Source Database
The access privileges required depend on whether you use Oracle LogMiner or Oracle Binary Reader for
CDC.
The following privileges must be granted to the user account used for data migration when using Oracle
LogMiner for change data capture (CDC) with an Oracle source database:
For Oracle versions prior to version 12c, grant the following:
• CREATE SESSION
• EXECUTE on DBMS_LOGMNR
• SELECT ANY TRANSACTION
• SELECT on V_$LOGMNR_LOGS
• SELECT on V_$LOGMNR_CONTENTS
API Version API Version 2016-01-01
69
AWS Database Migration Service User Guide
Using Oracle LogMiner or Oracle Binary
Reader for Change Data Capture (CDC)
For Oracle versions 12c and higher, grant the following:
• LOGMINING (for example, GRANT LOGMINING TO
<user account>
)
• CREATE SESSION
• EXECUTE on DBMS_LOGMNR
• SELECT on V_$LOGMNR_LOGS
• SELECT on V_$LOGMNR_CONTENTS
The following privileges must be granted to the user account used for data migration when using Oracle
Binary Reader for change data capture (CDC) with an Oracle source database:
• SELECT on v_$transportable_platform
Grant the SELECT on v_$transportable_platform privilege if the Redo logs are stored in Automatic
Storage Management (ASM) and accessed by AWS DMS from ASM.
• BFILE read - Used when AWS DMS does not have file-level access to the Redo logs, and the Redo logs are not accessed from ASM.
• DBMS_FILE_TRANSFER package - Used to copy the Redo log files to a temporary folder (in which case the EXECUTE ON DBMS_FILE_TRANSFER privilege needs to be granted as well)
• DBMS_FILE_GROUP package - Used to delete the Redo log files from a temporary/alternate folder (in which case the EXECUTE ON DBMS_FILE_ GROUP privilege needs to be granted as well).
• CREATE ANY DIRECTORY
Oracle file features work together with Oracle directories. Each Oracle directory object includes the name of the folder containing the files which need to be processed.
If you want AWS DMS to create and manage the Oracle directories, you need to grant the CREATE ANY
DIRECTORY privilege specified above. Note that the directory names will be prefixed with amazon_. If you do not grant this privilege, you need to create the corresponding directories manually. If you create the directories manually and the Oracle user specified in the Oracle Source endpoint is not the user that created the Oracle Directories, grant the READ on DIRECTORY privilege as well.
If the Oracle source endpoint is configured to copy the Redo log files to a temporary folder, and the
Oracle user specified in the Oracle source endpoint is not the user that created the Oracle directories, the following additional privileges are required:
• READ on the Oracle directory object specified as the source directory
• WRITE on the directory object specified as the destination directory in the copy process.
Limitations for Change Data Capture (CDC) on an Oracle Source
Database
The following limitations apply when using an Oracle database as a source for AWS Database Migration
Service (AWS DMS) change data capture.
• Oracle LogMiner, which AWS DMS uses for change data capture (CDC), doesn't support updating large binary objects (LOBs) when the UPDATE statement updates only LOB columns.
• For Oracle 11, Oracle LogMiner doesn't support the UPDATE statement for XMLTYPE and LOB columns.
• On Oracle 12c, LogMiner does not support LOB columns.
• AWS DMS doesn't capture changes made by the Oracle DBMS_REDEFINITION package, such as changes to table metadata and the OBJECT_ID value.
API Version API Version 2016-01-01
70
AWS Database Migration Service User Guide
Limitations on Oracle as a Source
• AWS DMS doesn't support index-organized tables with an overflow segment in change data capture
(CDC) mode when using BFILE. An example is when you access the redo logs without using LogMiner.
• AWS DMS doesn't support table clusters when you use Oracle Binary Reader.
• AWS DMS doesn't support virtual columns.
Limitations on Using Oracle as a Source for AWS
Database Migration Service
The following limitations apply when using an Oracle database as a source for AWS Database Migration
Service (AWS DMS). If you are using Oracle LogMiner or Oracle Binary Reader for change data capture
(CDC), see
Limitations for Change Data Capture (CDC) on an Oracle Source Database (p. 70) for
additional limitations.
• AWS DMS supports Oracle transparent data encryption (TDE) tablespace encryption and AWS Key
Management Service (AWS KMS) encryption when used with Oracle LogMiner. All other forms of encryption are not supported.
• AWS DMS supports the rename table <table name> to <new table name>
syntax with Oracle version
11 and higher.
• Oracle source databases columns created using explicit CHAR Semantics are transferred to a target
Oracle database using BYTE semantics. You must create tables containing columns of this type on the target Oracle database before migrating.
• AWS DMS doesn't replicate data changes resulting from partition or subpartition operations (ADD,
DROP, EXCHANGE, and TRUNCATE). To replicate such changes, you need to reload the table being replicated. AWS DMS replicates any future data changes to newly added partitions without your needing to reload the table again. However, UPDATE operations on old data records in these partitions fail and generate a
0 rows affected
warning.
• The data definition language (DDL) statement
ALTER TABLE ADD <column> <data_type> DEFAULT
<>
doesn't replicate the default value to the target, and the new column in the target is set to NULL.
If the new column is nullable, Oracle updates all the table rows before logging the DDL itself. As a result, AWS DMS captures the changes to the counters but doesn't update the target. Because the new column is set to NULL, if the target table has no primary key or unique index, subsequent updates generate a
0 rows affected
warning.
• Data changes resulting from the
CREATE TABLE AS
statement are not supported. However, the new table is created on the target.
• When limited-size LOB mode is enabled, AWS DMS replicates empty LOBs on the Oracle source as
NULL values in the target.
• When AWS DMS begins CDC, it maps a timestamp to the Oracle system change number (SCN). By default, Oracle keeps only five days of the timestamp to SCN mapping. Oracle generates an error if the timestamp specified is too old (greater than the five day retention). For more information, see the
Oracle documentation .
Supported Compression Methods
AWS Database Migration Service supports all compression methods supported by LogMiner.
User Account Privileges Required for Using Oracle as a Source for AWS Database Migration Service
To use an Oracle database as a source in an AWS DMS task, the user specified in the AWS
DMS Oracle database definitions must be granted the following privileges in the Oracle
API Version API Version 2016-01-01
71
AWS Database Migration Service User Guide
User Account Privileges for Oracle as a Source database. To grant privileges on Oracle databases on Amazon RDS, use the stored procedure rdsadmin.rdsadmin_util.grant_sys_object
. For more information, see Granting SELECT or EXECUTE privileges to SYS Objects .
Note
When granting privileges, use the actual name of objects (for example,
V_$OBJECT
including the underscore), not the synonym for the object (for example,
V$OBJECT
without the underscore).
• SELECT ANY TRANSACTION
• SELECT on V_$ARCHIVED_LOG
• SELECT on V_$LOG
• SELECT on V_$LOGFILE
• SELECT on V_$DATABASE
• SELECT on V_$THREAD
• SELECT on V_$PARAMETER
• SELECT on V_$NLS_PARAMETERS
• SELECT on V_$TIMEZONE_NAMES
• SELECT on V_$TRANSACTION
• SELECT on ALL_INDEXES
• SELECT on ALL_OBJECTS
• SELECT on DBA_OBJECTS (required if the Oracle version is earlier than 11.2.0.3)
• SELECT on ALL_TABLES
• SELECT on ALL_USERS
• SELECT on ALL_CATALOG
• SELECT on ALL_CONSTRAINTS
• SELECT on ALL_CONS_COLUMNS
• SELECT on ALL_TAB_COLS
• SELECT on ALL_IND_COLUMNS
• SELECT on ALL_LOG_GROUPS
• SELECT on SYS.DBA_REGISTRY
• SELECT on SYS.OBJ$
• SELECT on DBA_TABLESPACES
• SELECT on ALL_TAB_PARTITIONS
• SELECT on ALL_ENCRYPTED_COLUMNS
For the requirements specified following, grant the additional privileges named:
• If views are exposed, grant SELECT on ALL_VIEWS.
• When you use a specific table list, for each replicated table grant SELECT.
• When you use a pattern for a specific table list, grant SELECT ANY TABLE.
• When you add supplemental logging, grant ALTER ANY TABLE.
• When you add supplemental logging and you use a specific table list, grant ALTER for each replicated table.
• When migrating from Oracle RAC, grant permission to materialized views with the prefixes g_$ and v_
$.
API Version API Version 2016-01-01
72
AWS Database Migration Service User Guide
Configuring Oracle as a Source
Configuring Oracle as a Source
Before using an Oracle database as a data migration source, you need to perform several tasks. For an
Oracle database on Amazon RDS, see the following section. You can also use extra connection attributes to configure the Oracle source. For more information about extra connection attributes, see
Connection Attributes with AWS Database Migration Service (p. 197)
.
For an Oracle database on premises or on an Amazon EC2 instance, you should do the following:
• Provide Oracle Account Access – You must provide an Oracle user account for AWS Database
Migration Service. The user account must have read/write privileges on the Oracle database, as specified in
User Account Privileges Required for Using Oracle as a Source for AWS Database Migration
.
• Ensure that ARCHIVELOG Mode Is On – Oracle can run in two different modes, the ARCHIVELOG mode and the NOARCHIVELOG mode. To use Oracle with AWS Database Migration Service, the database in question must be in ARCHIVELOG mode.
• Set Up Supplemental Logging – The following steps, required only when using change data capture
(CDC), show how to set up supplemental logging for an Oracle database. For information on setting
up supplemental logging on a database on an Amazon RDS DB instance, see Configuring Oracle on an
Amazon RDS DB Instance as a Source (p. 74) .
To set up supplemental logging for an Oracle database
1. Determine if supplemental logging is enabled for the database:
• Run the following query:
SELECT name, value, description FROM v$parameter WHERE name = 'compatible';
The return result should be from
GE to 9.0.0
.
• Run the following query:
SELECT supplemental_log_data_min FROM v$database;
The returned result should be
YES
or
IMPLICIT
.
• Enable supplemental logging by running the following query:
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA
2. Make sure that the required supplemental logging is added for each table:
• If a primary key exists, supplemental logging must be added for the primary key, either by using the format to add supplemental logging on the primary key or by adding supplemental logging on the primary key columns.
• If no primary key exists and the table has a single unique index, then all of the unique index’s columns must be added to the supplemental log. Using
SUPPLEMENTAL LOG DATA (UNIQUE
INDEX) COLUMNS
doesn't add the unique index columns to the log.
• If no primary key exists and the table has multiple unique indexes, AWS DMS selects the first unique index. AWS DMS uses the first index in an alphabetically ordered ascending list in this case. Supplemental logging must be added on the selected index's columns. Using
API Version API Version 2016-01-01
73
AWS Database Migration Service User Guide
Configuring an RDS Oracle DB Instance as a Source
SUPPLEMENTAL LOG DATA (UNIQUE INDEX) COLUMNS doesn't add the unique index columns to the log.
• If there is no primary key and no unique index, supplemental logging must be added on all columns.
When the target table primary key or unique index is different than the source table primary key or unique index, you should add supplemental logging manually on the source table columns that make up the target table primary key or unique index.
• If you change the target table primary key, you should add supplemental logging on the selected index's columns, instead of the columns of the original primary key or unique index.
3. Perform additional logging if necessary, for example if a filter is defined for a table.
If a table has a unique index or a primary key, you need to add supplemental logging on each column that is involved in a filter if those columns are different than the primary key or unique index columns. However, if ALL COLUMNS supplemental logging has been added to the table, you don't need to add any additional logging.
ALTER TABLE EXAMPLE.TABLE ADD SUPPLEMENTAL LOG GROUP example_log_group (ID,NAME)
ALWAYS;
Note
You can also turn on supplemental logging using a connection attribute. If you use this option, you still need to enable supplemental logging at the database level using the following statement:
ALTER DATABASE ADD SUPPLEMENTAL LOG DATA
For more information on setting a connection attribute, see
Configuring Oracle on an Amazon RDS DB Instance as a Source
Using an Oracle database on an Amazon RDS DB instance as a data migration source requires several settings on the DB instance, including the following:
• Set Up Supplemental Logging – AWS DMS requires database-level supplemental logging to be enabled. To enable database-level supplemental logging, run the following command: exec rdsadmin.rdsadmin_util.alter_supplemental_logging('ADD');
Note
You can also turn on supplemental logging using a connection attribute. If you use this option, you still need to enable supplemental logging at the database level using the following statement:
exec rdsadmin.rdsadmin_util.alter_supplemental_logging('ADD');
API Version API Version 2016-01-01
74
AWS Database Migration Service User Guide
Configuring an RDS Oracle DB Instance as a Source
For more information on setting a connection attribute, see Oracle (p. 200)
In addition to running this command, we recommend that you turn on PRIMARY KEY logging at the database level to enable change capture for tables that have primary keys. To turn on PRIMARY KEY logging, run the following command: exec rdsadmin.rdsadmin_util.alter_supplemental_logging('ADD','PRIMARY KEY');
If you want to capture changes for tables that don't have primary keys, you should alter the table to add supplemental logging using the following command: alter table
table_name
add supplemental log data (ALL) columns;
Additionally, when you create new tables without specifying a primary key, you should either include a supplemental logging clause in the create statement or alter the table to add supplemental logging.
The following command creates a table and adds supplemental logging: create table
table_name
(
column data type
, supplemental log data(ALL) columns);
If you create a table and later add a primary key, you need to add supplemental logging to the table.
The following command alters the table to include supplemental logging: alter table
table_name
add supplemental log data (PRIMARY KEY) columns;
• Enable Automatic Backups – For information on setting up automatic backups, see the
Amazon RDS
User Guide
.
• Set Up Archiving – To retain archived redo logs of your Oracle database instance, which lets AWS DMS retrieve the log information using LogMiner, execute the following command. In this example, logs are kept for 24 hours.
exec rdsadmin.rdsadmin_util.set_configuration('archivelog retention hours',24);
Make sure that your storage has sufficient space for the archived redo logs during the specified period.
API Version API Version 2016-01-01
75
AWS Database Migration Service User Guide
Using SQL Server as a Source
Using a Microsoft SQL Server Database as a Source for AWS Database Migration Service
You can migrate data from one or many Microsoft SQL Server databases using AWS Database Migration
Service (AWS DMS). With a SQL Server database as a source, you can migrate data to either another SQL
Server database or one of the other supported databases.
AWS DMS supports, as a source, on-premises and Amazon EC2 instance databases for Microsoft SQL
Server versions 2005, 2008, 2008R2, 2012, and 2014. The Enterprise, Standard, Workgroup, and
Developer editions are supported. The Web and Express editions are not supported.
AWS DMS supports, as a source, Amazon RDS DB instance databases for SQL Server versions 2008R2,
2012, and 2014. The Enterprise and Standard editions are supported. Change data capture (CDC) is not supported for source databases on Amazon RDS. The Web, Workgroup, Developer, and Express editions are not supported.
You can have the source SQL Server database installed on any computer in your network. A SQL Server account with the appropriate access privileges to the source database for the type of task you chose is also required for use with AWS DMS.
You can use SSL to encrypt connections between your SQL Server endpoint and the replication instance.
For more information on using SSL with a SQL Server endpoint, see Using SSL With AWS Database
.
To capture changes from a source SQL Server database, the database must be configured for full backups and must be either the Enterprise, Developer, or Standard Edition. For a list of requirements
and limitations when using CDC with SQL Server, see Special Limitations When Capturing Data Changes
(CDC) from a SQL Server Source (p. 77) .
For additional details on working with SQL Server source databases and AWS DMS, see the following.
Topics
•
General Limitations on Using SQL Server as a Source for AWS Database Migration Service (p. 76)
•
Special Limitations When Capturing Data Changes (CDC) from a SQL Server Source (p. 77)
•
Supported Compression Methods (p. 78)
•
Working with Microsoft SQL Server AlwaysOn Availability Groups (p. 78)
•
Configuring a Microsoft SQL Server Database as a Replication Source for AWS Database Migration
•
Using MS-Replication to Capture Data Changes in Microsoft SQL Server (p. 79)
•
Using MS-CDC to Capture Data Changes in Microsoft SQL Server (p. 79)
•
Capturing Changes If You Can't Use MS-Replication or MS-CDC (p. 80)
General Limitations on Using SQL Server as a Source for AWS Database Migration Service
The following limitations apply when using a SQL Server database as a source for AWS DMS:
• The identity property for a column is not migrated to a target database column.
• Changes to rows with more than 8000 bytes of information, including header and mapping information, are not processed correctly due to limitations in the SQL Server TLOG buffer size.
• The Microsoft SQL Server endpoint does not support the use of sparse tables.
API Version API Version 2016-01-01
76
AWS Database Migration Service User Guide
SQL Server CDC Limitations
• Windows Authentication is not supported.
• Changes to computed fields in a Microsoft SQL Server are not replicated.
• Microsoft SQL Server partition switching is not supported.
• A clustered index on the source will be created as a non-clustered index on target.
• When using the WRITETEXT and UPDATETEXT utilities, AWS DMS does not capture events applied on the source database.
• The following data manipulation language (DML) pattern is not supported:
SELECT <*> INTO <new_table> FROM <existing_table>
• When using Microsoft SQL Server as a source, column-level encryption is not supported.
• Due to a known issue with Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2, AWS
Database Migration Service doesn't support server level audits on Microsoft SQL Server 2008 and
Microsoft SQL Server 2008 R2 as a source endpoint.
For example, running the following command causes AWS Database Migration Service to fail:
USE [master]
GO
ALTER SERVER AUDIT [my_audit_test-20140710] WITH (STATE=on)
GO
Special Limitations When Capturing Data Changes
(CDC) from a SQL Server Source
The following limitations apply specifically when trying to capture changes from a SQL Server database as a source for AWS DMS:
• You must use either the Enterprise, Standard, or Developer Edition.
• SQL Server must be configured for full backups and a backup must be made before beginning to replicate data.
• Recovery Model must be set to Bulk logged or Full.
• Microsoft SQL Server backup to multiple disks is not supported. If the backup is defined to write the database backup to multiple files over different disks, AWS DMS will not be able to read the data and the AWS DMS task will fail.
• Microsoft SQL Server Replication Publisher definitions for the source database used in a DMS CDC task are not removed when you remove a task. A Microsoft SQL Server system administrator must delete these definitions from Microsoft SQL Server.
• During CDC, AWS DMS needs to look up SQL Server transaction log backups to read changes. AWS
DMS does not support using SQL Server transaction log backups that were created using third party backup software.
• SQL Server does not capture changes on newly created tables until they have been published. When tables are added to a SQL Server source, AWS DMS manages the creation of the publication. However, this process might take several minutes. Operations made to newly created tables during this delay will not be captured or replicated to the target.
• The AWS DMS user account must have the sysAdmin fixed server role on the Microsoft SQL Server database you are connecting to.
API Version API Version 2016-01-01
77
AWS Database Migration Service User Guide
Supported Compression Methods
• AWS DMS change data capture requires FULLOGGING to be turned on in SQL Server; the only way to turn on FULLLOGGING in SQL Server is to either enable MS-REPLICATION or CHANGE DATA CAPTURE
(CDC).
• The SQL Server tlog cannot be reused until the changes have been processed.
• CDC operations are not supported on memory optimized tables. This limitation applies to Microsoft
SQL Server 2014 (when the feature was first introduced) and above.
Supported Compression Methods
The following table shows the compression methods AWS DMS supports for each Microsoft SQL Server version.
Microsoft SQL Server Version
2005
2008
2012
2014
Row/Page Compression (at
Partition Level)
No
Yes
Yes
Yes
Vardecimal Storage Format
No
No
No
No
Note
Sparse columns and columnar structure compression are not supported.
Working with Microsoft SQL Server AlwaysOn
Availability Groups
The Microsoft SQL Server AlwaysOn Availability Groups feature is a high-availability and disasterrecovery solution that provides an enterprise-level alternative to database mirroring.
To use AlwaysOn Availability Groups as a source in AWS DMS, do the following:
• Enable the Distribution option on all Microsoft SQL Server instances in your Availability Replicas.
• In the AWS DMS console, open the Microsoft SQL Server source database settings. For Server Name, specify the Domain Name Service (DNS) name or IP address that was configured for the Availability
Group Listener.
When you start an AWS Database Migration Service task for the first time, it might take longer than usual to start because the creation of the table articles is being duplicated by the Availability Groups
Server.
Configuring a Microsoft SQL Server Database as a Replication Source for AWS Database Migration
Service
You can configure a Microsoft SQL Server database as a replication source for AWS Database Migration
Service (AWS DMS). For the most complete replication of changes, we recommend that you use the
Enterprise, Standard, or Developer edition of Microsoft SQL Server. One of these versions is required
API Version API Version 2016-01-01
78
AWS Database Migration Service User Guide
Using MS-Replication to Capture Data
Changes in Microsoft SQL Server because these are the only versions that include MS-Replication(EE,SE) and MS-CDC(EE,DEV). The source
SQL Server must also be configured for full backups. In addition, AWS DMS must connect with a user (a
SQL Server instance login) that has the sysAdmin fixed server role on the SQL Server database you are connecting to.
Following, you can find information about configuring SQL Server as a replication source for AWS DMS.
Using MS-Replication to Capture Data Changes in
Microsoft SQL Server
To use MS-REPLICATION to replicate changes, each source table must have a primary key. If a source table doesn't have a primary key, you can use MS-CDC for capturing changes. If you haven't previously enabled MS-REPLICATION, you must enable your SQL Server database to use MS-REPLICATION. To enable MS-REPLICATION, take the steps following or see the Microsoft SQL Server documentation .
Setting up MS_REPLICATION adds a new SYSTEM database called
Distribution
to your source SQL
Server database.
To open the Configure Distribution wizard from Microsoft SQL Server
1. In Microsoft SQL Server Management Studio, open the context (right-click) menu for the
Replication
folder, and then choose Configure Distribution.
2. In the
Distributor step, choose <Microsoft SQL Server Name> will act as its own distributor. SQL
Server creates a distribution database and log.
Using MS-CDC to Capture Data Changes in Microsoft
SQL Server
If you need to replicate tables that don't have a primary key, the Use MS-CDC and Do Not Use MS-
Replication or MS-CDC options are available, as described following.
Important
Replicating tables that don't have a primary key or a unique index can adversely affect performance, because additional database resources are required to capture the changes.
However, you can prevent performance issues related to the absence of primary keys or a unique index by manually adding indexes to the target tables.
Note
SQL Server might not delete log entries. Log entries are not reused unless they are replicated and backed up.
Setting Up MS-CDC
To set up MS-CDC, you first need to enable MS-CDC for the database by running the following command.
use [DBname]
EXEC sys.sp_cdc_enable_db
Next, you need to enable MS-CDC for each of the source tables by running the following command.
EXECUTE sys.sp_cdc_enable_table @source_schema = N'MySchema', @source_name =
N'MyTable', @role_name = NULL;
For more information on setting up MS-CDC for specific tables, see the Microsoft SQL Server documentation .
API Version API Version 2016-01-01
79
AWS Database Migration Service User Guide
Capturing Changes If You Can't
Use MS-Replication or MS-CDC
Capturing Changes If You Can't Use MS-Replication or
MS-CDC
If your database is not set up for MS-REPLICATION or MS-CDC, and it is listed as a supported configuration for CDC as discussed at the beginning of this section, you can still capture some changes to tables. However, such a setup only captures INSERT and DELETE data manipulation language (DML) events. UPDATE and TRUNCATE TABLE events are ignored. Depending on what operations occur, this setup can result in the target database no longer being consistent with the source.
Also in this setup, a DELETE event will not be applied to a row that has previously been modified on the source but not on the target (a row where a previous UPDATE event that was ignored).
Using a PostgreSQL Database as a Source for AWS
Database Migration Service
You can migrate data from one or many PostgreSQL databases using AWS Database Migration Service
(AWS DMS). With a PostgreSQL database as a source, you can migrate data to either another PostgreSQL database or one of the other supported databases. AWS DMS supports a PostgreSQL version 9.4
database as a source for on-premises databases, databases on an EC2 instance, and databases on an
Amazon RDS DB instance.
You can use SSL to encrypt connections between your PostgreSQL endpoint and the replication instance.
For more information on using SSL with a PostgreSQL endpoint, see Using SSL With AWS Database
.
AWS DMS supports change data capture (CDC) for PostgreSQL tables with primary keys; if a table does not have a primary key, the WAL logs do not include a before image of the database row and AWS DMS cannot update the table.
AWS DMS supports CDC on Amazon RDS PostgreSQL databases when the DB instance is configured to use logical replication. Amazon RDS supports logical replication for a PostgreSQL DB instance version
9.4.9 and higher and 9.5.4 and higher.
For additional details on working with PostgreSQL databases and AWS DMS, see the following sections.
Topics
•
Prerequisites for Using a PostgreSQL Database as a Source for AWS Database Migration
•
Security Requirements When Using a PostgreSQL Database as a Source for AWS Database Migration
•
Limitations on Using a PostgreSQL Database as a Source for AWS Database Migration
•
Setting Up an Amazon RDS PostgreSQL DB Instance as a Source (p. 82)
•
Removing AWS Database Migration Service Artifacts from a PostgreSQL Source Database (p. 84)
•
Additional Configuration Settings When Using a PostgreSQL Database as a Source for AWS Database
Prerequisites for Using a PostgreSQL Database as a
Source for AWS Database Migration Service
For a PostgreSQL database to be a source for AWS DMS, you should do the following:
API Version API Version 2016-01-01
80
AWS Database Migration Service User Guide
Security Requirements for PostgreSQL as a Source
• Use a PostgreSQL database that is version 9.4.x or later.
• Grant superuser permissions for the user account specified for the PostgreSQL source database.
• Add the IP address of the AWS DMS replication server to the pg_hba.conf
configuration file.
• Set the following parameters and values in the postgresql.conf
configuration file:
• Set wal_level = logical
• Set max_replication_slots >=1
The max_replication_slots
value should be set according to the number of tasks that you want to run. For example, to run five tasks you need to set a minimum of five slots. Slots open automatically as soon as a task starts and remain open even when the task is no longer running. You need to manually delete open slots.
• Set max_wal_senders >=1
The max_wal_senders
parameter sets the number of concurrent tasks that can run.
• Set wal_sender_timeout =0
The wal_sender_timeout
parameter terminates replication connections that are inactive longer than the specified number of milliseconds. Although the default is 60 seconds, we recommend that you set this parameter to zero, which disables the timeout mechanism.
Security Requirements When Using a PostgreSQL
Database as a Source for AWS Database Migration
Service
The only security requirement when using PostgreSQL as a source is that the user account specified must be a registered user in the PostgreSQL database.
Limitations on Using a PostgreSQL Database as a
Source for AWS Database Migration Service
The following change data capture (CDC) limitations apply when using PostgreSQL as a source for AWS
DMS:
• A captured table must have a primary key. If a table doesn't have a primary key, AWS DMS ignores
DELETE and UPDATE record operations for that table.
• AWS DMS ignores an attempt to update a primary key segment. In these cases, the target identifies the update as one that didn't update any rows, but since the results of updating a primary key in
PostgreSQL is unpredictable, no records are written to the exceptions table.
.
• AWS DMS doesn't support the Start Process Changes from Timestamp run option.
• AWS DMS supports full load and change processing on Amazon RDS for PostgreSQL. For information
on how to prepare a PostgreSQL DB instance and to set it up for using CDC, see Setting Up an Amazon
RDS PostgreSQL DB Instance as a Source (p. 82) .
• AWS DMS doesn't map some PostgreSQL data types, including the JSON data type. The JSON is converted to CLOB.
• Replication of multiple tables with the same name but where each name has a different case (for example table1, TABLE1, and Table1) can cause unpredictable behavior, and therefore AWS DMS doesn't support it.
API Version API Version 2016-01-01
81
AWS Database Migration Service User Guide
Setting Up an Amazon RDS
PostgreSQL DB Instance as a Source
• AWS DMS supports change processing of CREATE, ALTER, and DROP DDL statements for tables unless the tables are held in an inner function or procedure body block or in other nested constructs.
For example, the following change is not captured:
CREATE OR REPLACE FUNCTION attu.create_distributors1() RETURNS void
LANGUAGE plpgsql
AS $$
BEGIN create table attu.distributors1(did serial PRIMARY KEY,name varchar(40) NOT NULL);
END;
$$;
• AWS DMS doesn't support change processing of TRUNCATE operations.
• AWS DMS doesn't support replication of partitioned tables. When a partitioned table is detected, the following occurs:
• The endpoint reports a list of parent and child tables.
• AWS DMS creates the table on the target as a regular table with the same properties as the selected tables.
• If the parent table in the source database has the same primary key value as its child tables, a
“duplicate key” error is generated.
Note
To replicate partitioned tables from a PostgreSQL source to a PostgreSQL target, you first need to manually create the parent and child tables on the target. Then you define a separate task to replicate to those tables. In such a case, you set the task configuration to
Truncate before
loading.
Setting Up an Amazon RDS PostgreSQL DB Instance as a Source
You can use the AWS master user account for the PostgreSQL DB instance as the user account for the
PostgreSQL source endpoint for AWS DMS . The master user account has the required roles that allow it to set up change data capture (CDC). If you use an account other than the master user account, the account must have the rds_superuser role and the rds_replication role. The rds_replication role grants permissions to manage logical slots and to stream data using logical slots.
If you don't use the master user account for the DB instance, you must create several objects from the master user account for the account that you use. For information about creating the needed objects, see
Migrating an Amazon RDS for PostgreSQL Database Without Using the Master User Account (p. 83)
.
Using CDC with an Amazon RDS for PostgreSQL DB Instance
You can use PostgreSQL's native logical replication feature to enable CDC during a database migration of an Amazon RDS PostgreSQL DB instance. This approach reduces downtime and ensures that the target database is in sync with the source PostgreSQL database. Amazon RDS supports logical replication for a
PostgreSQL DB instance version 9.4.9 and higher and 9.5.4 and higher.
To enable logical replication for an RDS PostgreSQL DB instance, do the following:
• In general, use the AWS master user account for the PostgreSQL DB instance as the user account for the PostgreSQL source endpoint. The master user account has the required roles that allow the it to set up CDC. If you use an account other than the master user account, you must create several objects
API Version API Version 2016-01-01
82
AWS Database Migration Service User Guide
Setting Up an Amazon RDS
PostgreSQL DB Instance as a Source
from the master account for the account that you use. For more information, see Migrating an Amazon
RDS for PostgreSQL Database Without Using the Master User Account (p. 83)
.
• Set the rds.logical_replication
parameter in your DB parameter group to 1. This is a static parameter that requires a reboot of the DB instance for the parameter to take effect. As part of applying this parameter, AWS DMS sets the wal_level
, max_wal_senders
, max_replication_slots
, and max_connections
parameters. Note that these parameter changes can increase WAL generation so you should only set the rds.logical_replication
parameter when you are using logical slots.
Migrating an Amazon RDS for PostgreSQL Database Without
Using the Master User Account
If you don't use the master user account for the Amazon RDS PostgreSQL DB instance that you are using as a source, you need to create several objects to capture data definition language (DDL) events. You create these objects in the account other than the master account and then create a trigger in the master user account.
Note
If you set the captureDDL
parameter to N on the source endpoint, you will not have to create the following table/trigger on the source database.
Use the following procedure to create these objects. The user account other than the master account is referred to as the NoPriv account in this procedure.
1. Choose a schema where the objects will be created. The default schema is public
. Ensure that the schema exists and is accessible by the NoPriv account.
2. Log in to the PostgreSQL DB instance using the NoPriv account.
3. Create the table awsdms_ddl_audit
by running the following command, replacing <objects_schema> in the code following with the name of the schema to use: create table <objects_schema>.awsdms_ddl_audit
(
c_key bigserial primary key,
c_time timestamp, -- Informational
c_user varchar(64), -- Informational: current_user
c_txn varchar(16), -- Informational: current transaction
c_tag varchar(24), -- Either 'CREATE TABLE' or 'ALTER TABLE' or 'DROP TABLE'
c_oid integer, -- For future use - TG_OBJECTID
c_name varchar(64), -- For future use - TG_OBJECTNAME
c_schema varchar(64), -- For future use - TG_SCHEMANAME. For now - holds
current_schema
c_ddlqry text -- The DDL query associated with the current DDL event
)
4. Create the function awsdms_intercept_ddl
by running the following command, replacing
<objects_schema> in the code following with the name of the schema to use:
CREATE OR REPLACE FUNCTION <objects_schema>.awsdms_intercept_ddl()
RETURNS event_trigger
LANGUAGE plpgsql
AS $$
declare _qry text;
BEGIN
API Version API Version 2016-01-01
83
AWS Database Migration Service User Guide
Removing Artifacts from a PostgreSQL Source
if (tg_tag='CREATE TABLE' or tg_tag='ALTER TABLE' or tg_tag='DROP TABLE') then
SELECT current_query() into _qry;
insert into <objects_schema>.awsdms_ddl_audit
values
(
default,current_timestamp,current_user,cast(TXID_CURRENT()as
varchar(16)),tg_tag,0,'',current_schema,_qry
);
delete from <objects_schema>.awsdms_ddl_audit; end if;
END;
$$;
5. Log out of the NoPriv account and log in with an account that has the rds_superuser role assigned to it.
6. Create the event trigger awsdms_intercept_ddl
by running the following command:
CREATE EVENT TRIGGER awsdms_intercept_ddl ON ddl_command_end
EXECUTE PROCEDURE <objects_schema>.awsdms_intercept_ddl();
When you have completed the procedure preceding, you can create the AWS DMS source endpoint using the NoPriv account.
Removing AWS Database Migration Service Artifacts from a PostgreSQL Source Database
To capture DDL events, AWS DMS creates various artifacts in the PostgreSQL database when a migration task starts. When the task completes, you might want to remove these artifacts. To remove the artifacts, issue the following statements (in the order they appear), where
{AmazonRDSMigration}
is the schema in which the artifacts were created: drop event trigger awsdms_intercept_ddl;
Note that the event trigger doesn't belong to a specific schema.
drop function {AmazonRDSMigration}.awsdms_intercept_ddl() drop table {AmazonRDSMigration}.awsdms_ddl_audit
drop schema {AmazonRDSMigration}
Note
Dropping a schema should be done with extreme caution, if at all. Never drop an operational schema, especially not a public one.
Additional Configuration Settings When Using a
PostgreSQL Database as a Source for AWS Database
Migration Service
You can add additional configuration settings when migrating data from a PostgreSQL database in two way.
API Version API Version 2016-01-01
84
AWS Database Migration Service User Guide
Using MySQL as a Source
• You can add values to the Extra Connection attribute to capture DDL events and to specify the schema in which the operational DDL database artifacts are created. For more information, see
• You can override connection string parameters. Select this option if you need to do either of the following:
• Specify internal AWS DMS parameters. Such parameters are rarely required and are therefore not exposed in the user interface.
• Specify pass-through (passthru) values for the specific database client. AWS DMS includes passthrough parameters in the connection sting passed to the database client.
Using a MySQL-Compatible Database as a Source for AWS Database Migration Service
You can migrate data from one or many MySQL, MariaDB, or Amazon Aurora databases using AWS
Database Migration Service. With a MySQL-compatible database as a source, you can migrate data to either another MySQL-compatible database or one of the other supported databases. MySQL versions
5.5, 5.6, and 5.7, as well as MariaDB and Amazon Aurora, are supported for on-premises, Amazon RDS, and Amazon EC2 instance databases. To enable change data capture (CDC) with Amazon RDS MySQL, you must use Amazon RDS MySQL version 5.6 or higher.
Note
Regardless of the source storage engine (MyISAM, MEMORY, etc.), AWS DMS creates the MySQLcompatible target table as an InnoDB table by default. If you need to have a table that uses a storage engine other than InnoDB, you can manually create the table on the MySQL-compatible target and migrate the table using the "Do Nothing" mode. For more information about the "Do
Nothing" mode, see
Full Load Task Settings (p. 123)
.
You can use SSL to encrypt connections between your MySQL-compatible endpoint and the replication
instance. For more information on using SSL with a MySQL-compatible endpoint, see Using SSL With
AWS Database Migration Service (p. 56) .
For additional details on working with MySQL-compatible databases and AWS Database Migration
Service, see the following sections.
Topics
•
Prerequisites for Using a MySQL Database as a Source for AWS Database Migration Service (p. 85)
•
Prerequisites for Using an Amazon RDS for MySQL Database as a Source for AWS Database Migration
•
Limitations on Using a MySQL Database as a Source for AWS Database Migration Service (p. 87)
•
Security Requirements for Using a MySQL Database as a Source for AWS Database Migration
•
Configuring a MySQL Database as a Source for AWS Database Migration Service (p. 88)
Prerequisites for Using a MySQL Database as a Source for AWS Database Migration Service
Before you begin to work with a MySQL database as a source for AWS DMS, make sure that you have the following prerequisites:
• A MySQL account with the required security settings. For more information, see
.
API Version API Version 2016-01-01
85
AWS Database Migration Service User Guide
Prerequisites for Using MySQL as a Source
• A MySQL-compatible database with the tables that you want to replicate accessible in your network.
• MySQL Community Edition
• MySQL Standard Edition
• MySQL Enterprise Edition
• MySQL Cluster Carrier Grade Edition
• MariaDB
• Amazon Aurora
• If your source is an Amazon RDS MySQL or MariaDB DB instance or an Amazon Aurora cluster, you must enable automatic backups. For more information on setting up automatic backups, see the
Amazon RDS User Guide
.
• If you use change data capture (CDC), you must enable and configure binary logging. To enable binary logging, the following parameters must be configured in MySQL’s my.ini
(Windows) or my.cnf
(UNIX) file:
Parameter
server_id log-bin binlog_format expire_logs_days
Value
Set this parameter to a value of 1 or greater.
Set the path to the binary log file, such as log-bin=E:\MySql_Logs\BinLog
.
Don't include the file extension.
Set this parameter to row
.
Set this parameter to a value of 1 or greater. To prevent overuse of disk space, we recommend that you don't use the default value of 0.
binlog_checksum binlog_row_image
Set this parameter to none
.
Set this parameter to full
.
• In order to use change data capture (CDC) with an Amazon RDS MySQL DB instance as a source, AWS
DMS needs access to the binary logs. Amazon RDS is fairly aggressive in clearing binary logs from the
DB instance. To use CDC with a MySQL DB instance on Amazon RDS, you should increase the amount of time the binary logs remain on the MySQL DB instance. For example, to increase log retention to 24 hours, you would run the following command:
call mysql.rds_set_configuration('binlog retention hours', 24);
• To replicate clustered (NDB) tables using AWS Database Migration Service, the following parameters must be configured in MySQL’s my.ini
(Windows) or my.cnf
(UNIX) file. Replicating clustered (NDB) tables is required only when you use CDC.
Parameter Value
ndb_log_bin ndb_log_updated_only
Set this parameter to on
. This value ensures that changes in clustered tables are logged to the binary log.
ndb_log_update_as_write
Set this parameter to
OFF
. This value prevents writing UPDATE statements as INSERT statements in the binary log.
Set this parameter to
OFF
. This value ensures that the binary log contains the entire row and not just the changed columns.
API Version API Version 2016-01-01
86
AWS Database Migration Service User Guide
Prerequisites for Using Amazon RDS for MySQL as a Source
Prerequisites for Using an Amazon RDS for MySQL
Database as a Source for AWS Database Migration
Service
When using an Amazon RDS for MySQL database as a source for AWS DMS, make sure that you have the following prerequisites:
• You must enable automatic backups. For more information on setting up automatic backups, see the
Amazon RDS User Guide
.
• In order to use change data capture (CDC) with an Amazon RDS MySQL DB instance as a source, AWS
DMS needs access to the binary logs. Amazon RDS is fairly aggressive in clearing binary logs from the
DB instance. To use CDC with a MySQL DB instance on Amazon RDS, you should increase the amount of time the binary logs remain on the MySQL DB instance to 24 hours or greater. For example, to increase log retention to 24 hours, you would run the following command:
call mysql.rds_set_configuration('binlog retention hours', 24);
• The binlog_format parameter should be set to "ROW."
Limitations on Using a MySQL Database as a Source for AWS Database Migration Service
When using a MySQL database as a source, AWS DMS doesn't support the following:
• The DDL statements Truncate Partition, Drop Table, and Rename Table.
• Using an
ALTER TABLE
<table_name>
ADD COLUMN
<column_name>
statement to add columns to the beginning or the middle of a table.
• Capturing changes from tables whose names contain both uppercase and lowercase characters.
• The AR_H_USER header column.
• The AUTO_INCREMENT attribute on a column is not migrated to a target database column.
• Capturing changes when the binary logs are not stored on standard block storage. For example, CDC does not work when the binary logs are stored on Amazon S3.
Security Requirements for Using a MySQL Database as a Source for AWS Database Migration Service
As a security requirement, the AWS DMS user must have the ReplicationAdmin role with the following privileges:
• REPLICATION CLIENT – This privilege is required for change data capture (CDC) tasks only. In other words, full-load-only tasks don't require this privilege.
• REPLICATION SLAVE – This privilege is required for change data capture (CDC) tasks only. In other words, full-load-only tasks don't require this privilege.
•
SUPER – This privilege is required only in MySQL versions prior to 5.6.6.
The AWS DMS user must also have SELECT privileges for the source tables designated for replication.
API Version API Version 2016-01-01
87
AWS Database Migration Service User Guide
Configuring a MySQL Database as a Source for AWS Database Migration Service
Configuring a MySQL Database as a Source for AWS
Database Migration Service
You can use extra connection attributes to configure the MySQL source. For more information about
MySQL extra connection attributes, see
Using Extra Connection Attributes with AWS Database Migration
.
Using a SAP ASE Database as a Source for AWS
Database Migration Service
You can migrate data from a SAP Adaptive Server Enterprise (ASE) database–formerly known as Sybase– using AWS Database Migration Service. With a SAP ASE database as a source, you can migrate data to any of the other supported AWS DMS target databases.
For additional details on working with SAP ASE databases and AWS Database Migration Service, see the following sections.
Topics
•
Prerequisites for Using a SAP ASE Database as a Source for AWS Database Migration
•
Limitations on Using SAP ASE as a Source for AWS Database Migration Service (p. 88)
•
User Account Permissions Required for Using SAP ASE as a Source for AWS Database Migration
•
Removing the Truncation Point (p. 89)
Prerequisites for Using a SAP ASE Database as a
Source for AWS Database Migration Service
For a SAP ASE database to be a source for AWS DMS, you should do the following:
• SAP ASE replication must be enabled for tables by using the sp_setreptable
command.
•
RepAgent
must be disabled on the SAP ASE database.
• When replicating to SAP ASE version 15.7 installed on a Windows EC2 instance configured with a non-
Latin language (for example, Chinese), AWS DMS requires SAP ASE 15.7 SP121 to be installed on the target SAP ASE machine.
Limitations on Using SAP ASE as a Source for AWS
Database Migration Service
The following limitations apply when using an SAP ASE database as a source for AWS Database
Migration Service (AWS DMS):
• Only one AWS DMS task can be run per SAP ASE database.
• Rename table is not supported, for example: sp_rename 'Sales.SalesRegion', 'SalesReg;
• Rename column is not supported, for example: sp_rename 'Sales.Sales.Region', 'RegID',
'COLUMN';
API Version API Version 2016-01-01
88
AWS Database Migration Service User Guide
User Account Permissions for SAP ASE as a Source
• Zero values located at the end of binary data type strings are truncated when replicated to the target database. For example,
0x0000000000000000000000000100000100000000
in the source table will become
0x00000000000000000000000001000001
in the target table.
• AWS DMS creates the target table with columns that do not allow NULL values, if the database default is not to allow NULL values. Consequently, if a Full Load or CDC replication task contains empty values, errors will occur.
You can prevent these errors from occurring by allowing nulls in the source database by using the following commands: sp_dboption
<database name>
, 'allow nulls by default', 'true' go use
<database name>
CHECKPOINT go
• The reorg rebuild
index command is not supported.
User Account Permissions Required for Using SAP
ASE as a Source for AWS Database Migration Service
To use an SAP ASE database as a source in an AWS DMS task, the user specified in the AWS DMS SAP ASE database definitions must be granted the following permissions in the SAP ASE database.
• sa_role
• replication_role
• sybase_ts_role
• If you have set the enableReplication
connection property to
Y
, then your must also be granted the sp_setreptable
permission. For more information on connection properties see Using Extra
Connection Attributes with AWS Database Migration Service (p. 197)
.
Removing the Truncation Point
When a task starts, AWS DMS establishes a
$replication_truncation_point
entry in the syslogshold system view, indicating that a replication process is in progress. While AWS DMS is working, it advances the replication truncation point at regular intervals, according to the amount of data that has already been copied to the target.
Once the
$replication_truncation_point
entry has been established, the AWS DMS task must be kept running at all times to prevent the database log from becoming excessively large. If you want to stop the
AWS DMS task permanently, the replication truncation point must be removed by issuing the following command: dbcc settrunc('ltm','ignore')
After the truncation point has been removed, the AWS DMS task cannot be resumed. The log continues to be truncated automatically at the checkpoints (if automatic truncation is set).
API Version API Version 2016-01-01
89
AWS Database Migration Service User Guide
Using MongoDB as a Source
Using MongoDB as a Source for AWS Database
Migration Service
AWS DMS supports MongoDB versions 2.6.x and 3.x as a database source. A MongoDB database is a
JSON document database where there are multiple MongoDB collections made up of JSON documents.
In MongoDB, a collection is somewhat equivalent to a relational database table and a JSON document is somewhat equivalent to a row in that relational database table. Internally, a JSON document is stored as a binary JSON (BSON) file in a compressed format that includes a type for each field in the document.
Each document has a unique ID.
AWS DMS supports two migration modes when using MongoDB as a source:
Document Mode
In document mode, the MongoDB document is migrated “as is,” meaning that its JSON data becomes a single column in a target table named “_doc”.
You can optionally set the extractDocID
parameter to true to create a second column named “_id” that will act as the primary key. You must set this parameter to true if you are going to use change data capture (CDC).
Document mode is the default setting when you use MongoDB as a source. To explicitly specify document mode, add nestingLevel=NONE
to the extra connection attribute on the MongoDB source endpoint.
Here is how AWS DMS manages documents and collections in document mode:
• When adding a new collection, the collection is replication as a CREATE TABLE.
• Renaming a collection is not supported.
Table Mode
In table mode, AWS DMS scans a specified number of MongoDB documents and creates a set of all the keys and their types. This set is then used to create the columns of the target table. In this mode, a MongoDB document is transformed into a table data row. Each top level field is transformed into a column. For each MongoDB document, AWS DMS adds each key and type to the target table’s column set. Nested values are flattened into a column containing dot-separated key names. For example, a JSON document consisting of {"a" : {"b" : {"c": 1}}} is migrated into a column named a.b.c.
You can specify how many documents are scanned by setting the docsToInvestigate
parameter.
The default value is 1000. You can enable table mode by adding nestingLevel=ONE
to the extra connection attributes of the MongoDB source endpoint.
Here is how AWS DMS manages documents and collections in table mode:
• When you add a document to an existing collection, the document (row) is replicated. If there are fields that do not exist in the collection, those fields are not replicated.
• When you update a document, the updated document is replicated. If there are fields that do not exist in the collection, those fields are not replicated.
• Deleting a document is fully supported.
• Adding a new collection will not result in a new table on the target when done during a CDC task.
• Renaming a collection is not supported.
API Version API Version 2016-01-01
90
AWS Database Migration Service User Guide
Prerequisites When Using MongoDB as a
Source for AWS Database Migration Service
Prerequisites When Using MongoDB as a Source for
AWS Database Migration Service
The user account used for the MongoDB endpoint needs to have access to the operations log of the replica set you create.
Prerequisites When Using CDC with MongoDB as a
Source for AWS Database Migration Service
To use change data capture (CDC) with a MongoDB source, you you'll need to do several things. First, you deploy the replica set to create the operations log. Next, you create the system user administrator.
Finally, you set the extractDocID parameter to true to extract the document ID that is used during CDC.
The MongoDB operations log (oplog) is a special capped collection that keeps a rolling record of all operations that modify the data stored in your databases. MongoDB applies database operations on the
primary and then records the operations on the primary's oplog. The secondary members then copy and apply these operations in an asynchronous process.
Deploying a Replica Set for Use with CDC
You need to deploy a replica set to use MongoDB as an AWS DMS source. When you deploy the replica set, you create the operations log that is used for CDC. Do the following steps to deploy the replica set.
For more information, see the MongoDB documentation .
To deploy a replica set
1. Using the command line, connect to mongo.
mongo localhost
2. Run in mongo shell.
rs.initiate() root
3. Verify the deployment.
rs.conf()
4. Set a different database path. Run with --dbpath the-path.
Next, create the system user administrator role.
To create the root user
1. Create a user to be the root account, as shown in the following code. In this example, we call that user root
.
use admin db.createUser(
{
user: "root",
pwd: "rootpass",
roles: [ { role: "root", db: "admin" } ]
}
API Version API Version 2016-01-01
91
AWS Database Migration Service User Guide
Security Requirements When Using MongoDB as a Source for AWS Database Migration Service
)
2. Stop mongod.
3. Restart mongod using the following command: mongod --replSet "rs0" --auth
4. Test that the operations log is readable using the following commands: mongo localhost/admin -u root -p rootpass mongo --authenticationDatabase admin -u root -p rootpass
5. If you are unable to read from operations log, run the following command: rs.initiate();
The final requirement to use CDC with MongoDB is to set the extractDocID
parameter. Set the extractDocID
parameter to true to create a second column named “_id” that will act as the primary key.
Security Requirements When Using MongoDB as a
Source for AWS Database Migration Service
AWS DMS supports two authentication methods for MongoDB. The two authentication methods are used to encrypt the password, so they are only used when the authType
parameter is set to password.
The MongoDB authentication methods are:
• MONOGODB-CR — the default when using MongoDB 2.x authentication.
• SCRAM-SHA-1 — the default when using MongoDB version 3.x authentication.
If an authentication method is not specified, AWS DMS uses the default method for the version of the
MongoDB source. The two authentication methods are used to encrypt the password, so they are only used when the authType
parameter is set to password.
Limitations When Using MongoDB as a Source for
AWS Database Migration Service
The following are limitations when using MongoDB as a source for AWS DMS:
• When the extractDocID
parameter is set to true, the ID string cannot exceed 200 characters.
• The MongoDB parameter
ObjectId
is a string with a limit of 200 characters. It includes the JSON structure of the id object: { "_id" : { "$oid" : "581730b9e85de3f180fd571e" } } and is used as the primary key in the target database.
• Collection names cannot include the dollar symbol ($).
Configuration Properties When Using MongoDB as a
Source for AWS Database Migration Service
When you set up your MongoDB source endpoint, you can specify additional configuration settings attributes. Attributes are specified by key-=value pairs and separated by semicolons. For example, the
API Version API Version 2016-01-01
92
AWS Database Migration Service User Guide
Configuration Properties When Using MongoDB as a Source for AWS Database Migration Service following code specifies that user name and password are not used for authentication, and that table mode is used.
The following table describes the configuration properties available when using MongoDB databases as an AWS Database Migration Service source database.
Attribute
Name
authType
Valid Values
NO
PASSWORD authMechanism DEFAULT
MONGODB_CR nestingLevel
SCRAM_SHA_1
NONE extractDocID
ONE true authSource false docsToInvestigateA positive integer greater than 0.
A valid MongoDB database name.
Default Value and Description
PASSWORD – When NO is selected, user name and password parameters are not used and can be empty.
DEFAULT – For MongoDB version 2.x, use MONGODB_CR.
For MongoDB version 3.x, use SCRAM_SHA_1. This attribute is not used when authType=No.
NONE – Specify NONE to use document mode. Specify
ONE to use table mode.
false – Use this attribute when
NONE.
1000 – Use this attribute when nestingLevel nestingLevel
is set to
is set to ONE.
admin – This attribute is not used when authType=No.
API Version API Version 2016-01-01
93
AWS Database Migration Service User Guide
Targets for Data Migration
AWS Database Migration Service (AWS DMS) can use many of the most popular databases as a target for data replication. The target can be on an Amazon Elastic Compute Cloud (Amazon EC2) instance, an
Amazon Relational Database Service (Amazon RDS) instance, or an on-premises database.
Note
Regardless of the source storage engine (MyISAM, MEMORY, etc.), AWS DMS creates the MySQLcompatible target table as an InnoDB table by default. If you need to have a table that uses a storage engine other than InnoDB, you can manually create the table on the MySQL-compatible target and migrate the table using the "Do Nothing" mode. For more information about the "Do
Nothing" mode, see
Full Load Task Settings (p. 123)
.
The databases include the following:
On-premises and EC2 instance databases
• Oracle versions 10g, 11g, 12c, for the Enterprise, Standard, Standard One, and Standard Two editions
• Microsoft SQL Server versions 2005, 2008, 2008R2, 2012, 2014 for the Enterprise, Standard,
Workgroup, and Developer editions. The Web and Express editions are not supported.
• MySQL versions 5.5, 5.6, and 5.7
• MariaDB (supported as a MySQL-compatible data target)
• PostgreSQL versions 9.3 and later
• SAP Adaptive Server Enterprise (ASE) 15.7 and later
Amazon RDS instance databases, Amazon Redshift, Amazon S3, and Amazon DynamoDB
• Amazon RDS Oracle versions 11g (versions 11.2.0.3.v1 and later) and 12c, for the Enterprise, Standard,
Standard One, and Standard Two editions
• Amazon RDS Microsoft SQL Server versions 2008R2, 2012, and 2014, for the Enterprise, Standard,
Workgroup, and Developer editions. The Web and Express editions are not supported.
• Amazon RDS MySQL versions 5.5, 5.6, and 5.7
• Amazon RDS MariaDB (supported as a MySQL-compatible data target)
• Amazon RDS PostgreSQL versions 9.3 and later
• Amazon Aurora
API Version API Version 2016-01-01
94
AWS Database Migration Service User Guide
Using Oracle as a Target
• Amazon Redshift
• Amazon S3
• Amazon DynamoDB
Using an Oracle Database as a Target for AWS
Database Migration Service
You can migrate data to Oracle database targets using AWS DMS, either from another Oracle database or from one of the other supported databases.
You can use SSL to encrypt connections between your Oracle endpoint and the replication instance. For more information on using SSL with an Oracle endpoint, see
Using SSL With AWS Database Migration
.
AWS DMS supports Oracle versions 10g, 11g, and 12c for on-premises and EC2 instances for the
Enterprise, Standard, Standard One, and Standard Two editions as targets. AWS DMS supports Oracle versions 11g (versions 11.2.0.3.v1 and later) and 12c for Amazon RDS instance databases for the
Enterprise, Standard, Standard One, and Standard Two editions.
When using Oracle as a target, we assume the data should be migrated into the schema/user which is used for the target connection. If you want to migrate data to a different schema, you'll need to use a schema transformation to do so. For example, if my target endpoint connects to the user RDSMASTER and you wish to migrate from the user PERFDATA to PERFDATA, you'll need to create a transformation as follows:
{
"rule-type": "transformation",
"rule-id": "2",
"rule-name": "2",
"rule-action": "rename",
"rule-target": "schema",
"object-locator": {
"schema-name": "PERFDATA"
},
"value": "PERFDATA"
}
For more information about transformations, see Selection and Transformation Table Mapping using
.
Limitations on Oracle as a Target for AWS Database
Migration Service
Limitations when using Oracle as a target for data migration include the following:
• AWS DMS does not create schema on the target Oracle database. You have to create any schemas you want on the target Oracle database. The schema name must already exist for the Oracle target. Tables from source schema are imported to user/schema, which AWS DMS uses to connect to the target instance. You must create multiple replication tasks if you have to migrate multiple schemas.
• AWS DMS doesn't support the
Use direct path full load
option for tables with INDEXTYPE
CONTEXT. As a workaround, you can use array load.
API Version API Version 2016-01-01
95
AWS Database Migration Service User Guide
User Account Privileges for Oracle as a Target
• In Batch Optimized Apply mode, loading into the net changes table uses Direct Path, which doesn't support XMLType. As a workaround, you can use Transactional Apply mode.
User Account Privileges Required for Using Oracle as a Target
To use an Oracle target in an AWS Database Migration Service task, for the user account specified in the
AWS DMS Oracle database definitions you need to grant the following privileges in the Oracle database:
• SELECT ANY TRANSACTION
• SELECT on V$NLS_PARAMETERS
• SELECT on V$TIMEZONE_NAMES
• SELECT on ALL_INDEXES
• SELECT on ALL_OBJECTS
• SELECT on DBA_OBJECTS
• SELECT on ALL_TABLES
• SELECT on ALL_USERS
• SELECT on ALL_CATALOG
• SELECT on ALL_CONSTRAINTS
• SELECT on ALL_CONS_COLUMNS
• SELECT on ALL_TAB_COLS
• SELECT on ALL_IND_COLUMNS
• DROP ANY TABLE
• SELECT ANY TABLE
• INSERT ANY TABLE
• UPDATE ANY TABLE
• CREATE ANY VIEW
• DROP ANY VIEW
• CREATE ANY PROCEDURE
• ALTER ANY PROCEDURE
• DROP ANY PROCEDURE
• CREATE ANY SEQUENCE
• ALTER ANY SEQUENCE
• DROP ANY SEQUENCE
For the requirements specified following, grant the additional privileges named:
• To use a specific table list, grant SELECT on any replicated table and also ALTER on any replicated table.
• To allow a user to create a table in his default tablespace, grant the privilege GRANT UNLIMITED
TABLESPACE.
• For logon, grant the privilege CREATE SESSION.
• If you are using a direct path, grant the privilege LOCK ANY TABLE.
• If the "DROP and CREATE table" or "TRUNCATE before loading" option is selected in the full load settings, and the target table schema is different from that for the AWS DMS user, grant the privilege
DROP ANY TABLE.
API Version API Version 2016-01-01
96
AWS Database Migration Service User Guide
Configuring Oracle as a Target
• To store changes in change tables or an audit table when the target table schema is different from that for the AWS DMS user, grant the privileges CREATE ANY TABLE and CREATE ANY INDEX.
Read Privileges Required for AWS Database Migration Service on the Target Database
The AWS DMS user account must be granted read permissions for the following DBA tables:
• SELECT on DBA_USERS
• SELECT on DBA_TAB_PRIVS
• SELECT on DBA_OBJECTS
• SELECT on DBA_SYNONYMS
• SELECT on DBA_SEQUENCES
• SELECT on DBA_TYPES
• SELECT on DBA_INDEXES
• SELECT on DBA_TABLES
• SELECT on DBA_TRIGGERS
If any of the required privileges cannot be granted to V$xxx, then grant them to V_$xxx.
Configuring an Oracle Database as a Target for AWS
Database Migration Service
Before using an Oracle database as a data migration target, you must provide an Oracle user account to
AWS DMS. The user account must have read/write privileges on the Oracle database, as specified in the
section User Account Privileges Required for Using Oracle as a Target (p. 96) .
Using a Microsoft SQL Server Database as a Target for AWS Database Migration Service
You can migrate data to Microsoft SQL Server databases using AWS DMS. With an SQL Server database as a target, you can migrate data from either another SQL Server database or one of the other supported databases.
For on-premises and Amazon EC2 instance databases, AWS DMS supports as a target SQL Server versions
2005, 2008, 2008R2, 2012, and 2014, for the Enterprise, Standard, Workgroup, and Developer editions.
The Web and Express editions are not supported.
For Amazon RDS instance databases, AWS DMS supports as a target SQL Server versions 2008R2, 2012, and 2014, for the Enterprise, Standard, Workgroup, and Developer editions are supported. The Web and
Express editions are not supported.
For additional details on working with AWS DMS and SQL Server target databases, see the following.
Topics
•
Limitations on Using SQL Server as a Target for AWS Database Migration Service (p. 98)
•
Security Requirements When Using SQL Server as a Target for AWS Database Migration
API Version API Version 2016-01-01
97
AWS Database Migration Service User Guide
Limitations on Using SQL Server as a
Target for AWS Database Migration Service
Limitations on Using SQL Server as a Target for AWS
Database Migration Service
The following limitations apply when using a SQL Server database as a target for AWS DMS:
• When you manually create a SQL Server target table with a computed column, full load replication is not supported when using the BCP bulk-copy utility. To use full load replication, disable the
Use BCP
for loading tables option in the console's Advanced tab.
• When replicating tables with SQL Server spatial data types (GEOMETRY and GEOGRAPHY), AWS DMS replaces any spatial reference identifier (SRID) that you might have inserted with the default SRID. The default SRID is 0 for GEOMETRY and 4326 for GEOGRAPHY.
Security Requirements When Using SQL Server as a
Target for AWS Database Migration Service
The following describes the security requirements for using AWS DMS with a Microsoft SQL Server target.
• AWS DMS user account must have at least the db_owner user role on the Microsoft SQL Server database you are connecting to.
• A Microsoft SQL Server system administrator must provide this permission to all AWS DMS user accounts.
Using a PostgreSQL Database as a Target for AWS
Database Migration Service
You can migrate data to PostgreSQL databases using AWS DMS, either from another PostgreSQL database or from one of the other supported databases.
PostgreSQL versions 9.3 and later are supported for on-premises, Amazon RDS, and EC2 instance databases.
Limitations on Using PostgreSQL as a Target for AWS
Database Migration Service
The following limitations apply when using a PostgreSQL database as a target for AWS DMS:
• The JSON data type is converted to the Native CLOB data type.
Security Requirements When Using a PostgreSQL
Database as a Target for AWS Database Migration
Service
For security purposes, the user account used for the data migration must be a registered user in any
PostgreSQL database that you use as a target.
API Version API Version 2016-01-01
98
AWS Database Migration Service User Guide
Using MySQL as a Target
Using a MySQL-Compatible Database as a Target for AWS Database Migration Service
You can migrate data to MySQL databases using AWS DMS, either from another MySQL database or from one of the other supported databases.
MySQL versions 5.5, 5.6, and 5.7, as well as MariaDB and Amazon Aurora, are supported.
Prerequisites for Using a MySQL-Compatible
Database as a Target for AWS Database Migration
Service
Before you begin to work with a MySQL database as a target for AWS DMS, make sure that you have the following prerequisites:
• A MySQL account with the required security settings. For more information, see
When Using MySQL as a Target for AWS Database Migration Service (p. 100) .
• A MySQL database with the tables that you want to replicate accessible in your network. AWS DMS supports the following MySQL editions:
• MySQL Community Edition
• MySQL Standard Edition
• MySQL Enterprise Edition
• MySQL Cluster Carrier Grade Edition
• MariaDB
• Amazon Aurora
• During a load, you should consider disabling foreign keys. In order to disable foreign key checks on a MySQL-compatible database during a load, you can add the following command to the
Extra
Connection Attributes in the Advanced section of the target MySQL, Aurora, MariaDB endpoint connection information: initstmt=SET FOREIGN_KEY_CHECKS=0
Limitations on Using MySQL as a Target for AWS
Database Migration Service
When using a MySQL database as a target, AWS DMS doesn't support the following:
• The DDL statements Truncate Partition, Drop Table, and Rename Table.
• Using an
ALTER TABLE
<table_name>
ADD COLUMN
<column_name>
statement to add columns to the beginning or the middle of a table.
In addition, when you update a column's value to its existing value, MySQL returns a
0 rows affected warning. In contrast, Oracle performs an update of one row in this case. The MySQL result generates an entry in the awsdms_apply_exceptions control table and the following warning:
API Version API Version 2016-01-01
99
AWS Database Migration Service User Guide
Security Requirements for MySQL as a Target
Some changes from the source database had no impact when applied to the target database. See awsdms_apply_exceptions table for details.
Security Requirements When Using MySQL as a
Target for AWS Database Migration Service
When using MySQL as a target for data migration, you must provide MySQL account access to the AWS
DMS user account. This user must have read/write privileges in the MySQL database.
To create the necessary privileges, run the following commands:
CREATE USER '<user acct>'@'%' IDENTIFIED BY <user password>';
GRANT ALTER, CREATE, DROP, INDEX, INSERT, UPDATE, DELETE, SELECT ON myschema.* TO '<user
acct>'@'%';
GRANT ALL PRIVILEGES ON awsdms_control.* TO '<user acct>'@'%';
Using an Amazon Redshift Database as a Target for AWS Database Migration Service
You can migrate data to Amazon Redshift databases using AWS Database Migration Service. Amazon
Redshift is a fully-managed, petabyte-scale data warehouse service in the cloud. With an Amazon
Redshift database as a target, you can migrate data from all of the other supported source databases.
The Amazon Redshift cluster must be in the same AWS account and same AWS Region as the replication instance.
During a database migration to Amazon Redshift, AWS DMS first moves data to an S3 bucket. Once the files reside in an S3 bucket, AWS DMS then transfers them to the proper tables in the Amazon Redshift data warehouse. AWS DMS creates the S3 bucket in the same AWS Region as the Amazon Redshift database. The AWS DMS replication instance must be located in that same region.
If you use the AWS Command Line Interface (AWS CLI) or the AWS DMS API to migrate data to Amazon
Redshift, you must set up an AWS Identity and Access Management (IAM) role to allow S3 access. For more information about creating this IAM role, see
Creating the IAM Roles to Use With the AWS CLI and
The Amazon Redshift endpoint provides full automation for the following:
• Schema generation and data type mapping
• Full load of source database tables
• Incremental load of changes made to source tables
• Application of schema changes in data definition language (DDL) made to the source tables
• Synchronization between full load and change data capture (CDC) processes.
AWS Database Migration Service supports both full load and change processing operations. AWS DMS reads the data from the source database and creates a series of comma-separated value (CSV) files.
API Version API Version 2016-01-01
100
AWS Database Migration Service User Guide
Prerequisites for Using an Amazon Redshift Database as a Target for AWS Database Migration Service
For full-load operations, AWS DMS creates files for each table. AWS DMS then copies the table files for each table to a separate folder in Amazon S3. When the files are uploaded to Amazon S3, AWS DMS sends a copy command and the data in the files are copied into Amazon Redshift. For change-processing operations, AWS DMS copies the net changes to the CSV files. AWS DMS then uploads the net change files to Amazon S3 and copies the data to Amazon Redshift.
Topics
•
Prerequisites for Using an Amazon Redshift Database as a Target for AWS Database Migration
•
Limitations on Using Redshift as a Target for AWS Database Migration Service (p. 101)
•
Configuring an Amazon Redshift Database as a Target for AWS Database Migration Service (p. 102)
•
Using Enhanced VPC Routing with an Amazon Redshift as a Target for AWS Database Migration
Prerequisites for Using an Amazon Redshift Database as a Target for AWS Database Migration Service
The following list describe the prerequisites necessary for working with Amazon Redshift as a target for data migration:
• Use the AWS Management Console to launch an Amazon Redshift cluster. You should note the basic information about your AWS account and your Amazon Redshift cluster, such as your password, user name, and database name. You will need these values when creating the Amazon Redshift target endpoint.
• The Amazon Redshift cluster must be in the same AWS account and the same AWS Region as the replication instance.
• The AWS DMS replication instance needs network connectivity to the Redshift endpoint (hostname and port) that your cluster uses.
• AWS DMS uses an Amazon S3 bucket to transfer data to the Redshift database. For AWS DMS to create the bucket, the DMS console uses an Amazon IAM role, dms-access-for-endpoint
. If you use the AWS
CLI or DMS API to create a database migration with Amazon Redshift as the target database, you must
With the AWS CLI and AWS DMS API (p. 44) .
Limitations on Using Redshift as a Target for AWS
Database Migration Service
When using a Redshift database as a target, AWS DMS doesn't support the following:
• When migrating from MySQL/Aurora to Redshift, you cannot use DDL to alter a column from the
BLOB data type to the NVARCHAR data type.
For example, the following DDL is not supported.
ALTER TABLE table_name MODIFY column_name NVARCHAR(n);
API Version API Version 2016-01-01
101
AWS Database Migration Service User Guide
Configuring an Amazon Redshift Database as a Target for AWS Database Migration Service
Configuring an Amazon Redshift Database as a
Target for AWS Database Migration Service
AWS Database Migration Service must be configured to work with the Amazon Redshift instance. The following table describes the configuration properties available for the Amazon Redshift endpoint.
Property
server port username password database
Description
The name of the Amazon Redshift cluster you are using.
The port number for Amazon Redshift. The default value is 5439.
An Amazon Redshift user name for a registered user.
The password for the user named in the username property.
The name of the Amazon Redshift data warehouse (service) you are working with.
If you want to add extra connection string attributes to your Amazon Redshift endpoint, you can specify the maxFileSize
and fileTransferUploadStreams
attributes. For more information on these attributes,
.
Using Enhanced VPC Routing with an Amazon
Redshift as a Target for AWS Database Migration
Service
If you're using the Enhanced VPC Routing feature with your Amazon Redshift target, the feature forces all COPY traffic between your Redshift cluster and your data repositories through your Amazon VPC.
Because Enhanced VPC Routing affects the way that Amazon Redshift accesses other resources, COPY commands might fail if you haven't configured your VPC correctly.
AWS DMS can be affected by this behavior since it uses the COPY command to move data in S3 to a
Redshift cluster.
Following are the steps AWS DMS takes to load data into an Amazon Redshift target:
1. AWS DMS copies data from the source to CSV files on the replication server.
2. AWS DMS uses the AWS SDK to copy the CSV files into an S3 bucket on your account.
3. AWS DMS then uses the COPY command in Redshift to copy data from the CSV files in S3 to an appropriate table in Redshift.
If Enhanced VPC Routing is not enabled, Amazon Redshift routes traffic through the Internet, including traffic to other services within the AWS network. If the feature is not enabled, you do not have to configure the network path. If the feature is enabled, you must specifically create a network path between your cluster's VPC and your data resources. For more information on the configuration required, see Enhanced VPC Routing in the Amazon Redshift documentation.
API Version API Version 2016-01-01
102
AWS Database Migration Service User Guide
Using SAP ASE as a Target
Using a SAP ASE Database as a Target for AWS
Database Migration Service
You can migrate data to SAP Adaptive Server Enterprise (ASE)–formerly known as Sybase–databases using AWS DMS, either from any of the supported database sources.
SAP ASE version 15.7 and later are supported.
Prerequisites for Using a SAP ASE Database as a
Target for AWS Database Migration Service
Before you begin to work with a SAP ASE database as a target for AWS DMS, make sure that you have the following prerequisites:
• You must provide SAP ASE account access to the AWS DMS user. This user must have read/write privileges in the SAP ASE database.
• When replicating to SAP ASE version 15.7 installed on a Windows EC2 instance configured with a non-
Latin language (for example, Chinese), AWS DMS requires SAP ASE 15.7 SP121 to be installed on the target SAP ASE machine.
Using Amazon S3 as a Target for AWS Database
Migration Service
You can migrate data to Amazon S3 using AWS DMS from any of the supported database sources.
When using S3 as a target in an AWS DMS task, both full load and change data capture (CDC) data is written to comma-separated-values (CSV) format. AWS DMS names files created during a full load using incremental counters, for example LOAD00001.csv, LOAD00002, and so on. AWS DMSnames CDC files using timestamps, for example 20141029-1134010000.csv. For each source table, AWS DMS creates a folder under the specified target folder. AWS DMS writes all full load and CDC files to the specified S3 bucket.
The parameter bucketFolder
contains the location where the .csv files are stored before being uploaded to the S3 bucket. Table data is stored in the following format in the S3 bucket:
<schema_name>/<table_name>/LOAD001.csv
<schema_name>/<table_name>/LOAD002.csv
<schema_name>/<table_name>/<time-stamp>.csv
{
You can specify the column delimiter, row delimiter, null value indicator, and other parameters using the extra connection attributes. For more information on the extra connection attributes, see
Connection Attributes (p. 104) at the end of this section.
Prerequisites for Using Amazon S3 as a Target
The AWS account you use for the migration must have write and delete access to the Amazon S3 bucket you are using as a target. The role assigned to the user account used to create the migration task must have the following set of permissions.
API Version API Version 2016-01-01
103
AWS Database Migration Service User Guide
Limitations to Using Amazon S3 as a Target
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Action": [
"s3:PutObject",
"s3:DeleteObject"
],
"Resource": [
"arn:aws:s3:::buckettest2*"
]
},
{
"Effect": "Allow",
"Action": [
"s3:ListBucket"
],
"Resource": [
"arn:aws:s3:::buckettest2*"
]
}
]
}
Limitations to Using Amazon S3 as a Target
The following limitations apply to a file in Amazon S3 that you are using as a target:
• Only the following data definition language (DDL) commands are supported: TRUNCATE TABLE, DROP
TABLE, and CREATE TABLE.
• Full LOB mode is not supported.
• UPDATE and DELETE statements are not supported.
• Changes to the source table structure during full load are not supported. Changes to the data is supported during full load.
Security
To use Amazon S3 as a target, the account used for the migration must have write and delete access to the Amazon S3 bucket that is used as the target. You must specify the Amazon Resource Name (ARN) of an IAM role that has the permissions required to access Amazon S3.
Extra Connection Attributes
You can specify the following options as extra connection attributes.
Option
csvRowDelimiter csvDelimiter
Description
The delimiter used to separate rows in the source files. The default is a carriage return (
\n
).
Example:
csvRowDelimiter=\n;
The delimiter used to separate columns in the source files. The default is a comma.
API Version API Version 2016-01-01
104
AWS Database Migration Service User Guide
Using Amazon DynamoDB as a Target
Option
bucketFolder bucketName compressionType
Description
Example:
csvDelimiter=,;
An optional parameter to set a folder name in the S3 bucket. If provided, tables are created in the path <bucketFolder>/<schema_name>/
<table_name>/. If this parameter is not specified, then the path used is
<schema_name>/<table_name>/.
Example:
bucketFolder=testFolder;
The name of the S3 bucket.
Example:
bucketName=buckettest;
An optional parameter to use GZIP to compress the target files. Set to NONE
(the default) or do not use to leave the files uncompressed.
Example:
compressionType=GZIP;
Using an Amazon DynamoDB Database as a Target for AWS Database Migration Service
You can use AWS DMS to migrate data to an Amazon DynamoDB table. Amazon DynamoDB is a fully managed NoSQL database service that provides fast and predictable performance with seamless scalability. AWS DMS supports using a relational database or MongoDB as a source.
In DynamoDB, tables, items, and attributes are the core components that you work with. A table is a collection of items, and each item is a collection of attributes. DynamoDB uses primary keys, called partition keys, to uniquely identify each item in a table. You can also use keys and secondary indexes to provide more querying flexibility.
You use object mapping to migrate your data from a source database to a target DynamoDB table.
Object mapping lets you determine where the source data is located in the target.
Migrating from a Relational Database to a DynamoDB
Table
AWS DMS supports migrating data to DynamoDB’s scalar data types. When migrating from a relational database like Oracle or MySQL to DynamoDB, you may want to restructure how you store this data.
Currently AWS DMS supports single table to single table restructuring to DynamoDB scalar type attributes. If you are migrating data into DynamoDB from a relational database table, you would take data from a table and reformat it into DynamoDB scalar data type attributes. These attributes can accept data from multiple columns and you can map a column to an attribute directly.
AWS DMS supports the following DynamoDB scalar data types:
API Version API Version 2016-01-01
105
AWS Database Migration Service User Guide
Prerequisites for DynamoDB as a Target
• String
• Number
• Boolean
Note
NULL data from the source are ignored on the target.
Prerequisites for Using a DynamoDB as a Target for
AWS Database Migration Service
Before you begin to work with a DynamoDB database as a target for AWS DMS, make sure you create an IAM role that allows AWS DMS to assume and grants access to the DynamoDB tables that are being migrated into. The minimum set of access permissions is shown in the following sample role policy:
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Principal": {
"Service": "dms.amazonaws.com"
},
"Action": "sts:AssumeRole"
}
]
}
The user account that you use for the migration to DynamoDB must have the following permissions:
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Action": [
"dynamodb:PutItem",
"dynamodb:CreateTable",
"dynamodb:DescribeTable",
"dynamodb:DeleteTable",
"dynamodb:DeleteItem"
],
"Resource": [
"arn:aws:dynamodb:us-west-2:account-id:table/Name1",
"arn:aws:dynamodb:us-west-2:account-id:table/OtherName*",
]
},
{
"Effect": "Allow",
"Action": [
"dynamodb:ListTables",
],
"Resource": "*"
}
]
}
API Version API Version 2016-01-01
106
AWS Database Migration Service User Guide
Limitations for DynamoDB as a Target
Limitations When Using DynamoDB as a Target for
AWS Database Migration Service
The following limitations apply when using Amazon DynamoDB as a target:
• DynamoDB limits the precision of the Number data type to 38 places. Store all data types with a higher precision as a String. You need to explicitly specify this using the object mapping feature.
• Because Amazon DynamoDB doesn’t have a Date data type, data using the Date data type are converted to strings.
• AWS DMS only supports replication of tables with non-composite primary keys, unless you specify an object mapping for the target table with a custom hash or range key, or both.
• AWS DMS doesn’t support LOB data unless it is a CLOB. AWS DMS converts CLOB data into a
DynamoDB string when migrating data.
Using Object Mapping to Migrate Data to DynamoDB
AWS DMS uses table mapping rules to map data from the source to the target DynamoDB table. To map data to a DynamoDB target, you use a type of table mapping rule called object-mapping. Object mapping lets you define the attribute names and the data to be migrated to them. Amazon DynamoDB doesn't have a preset structure other than having a partition key and an optional sort key. If you have a noncomposite primary key, AWS DMS will use it. If you have a composite primary key or you want to use a sort key, you need to define these keys and the other attributes in your target DynamoDB table.
To create an object mapping rule, you specify the rule-type
as object-mapping. This rule specifies what type of object mapping you want to use.
The structure for the rule is as follows:
{ "rules": [
{
"rule-type": "object-mapping",
"rule-id": "<id>",
"rule-name": "<name>",
"rule-action": "<valid object-mapping rule action>",
"object-locator": {
"schema-name": "<case-sensitive schema name>",
"table-name": ""
},
"target-table-name": "<table_name>",
}
}
]
}
AWS DMS currently supports map-record-to-record and map-record-to-document as the only valid values for the rule-action
parameter. map-record-to-record and map-record-to-document specify what AWS
DMS does by default to records that aren’t excluded as part of the exclude-columns
attribute list; these values don’t affect the attribute-mappings in any way.
• map-record-to-record can be used when migrating from a relational database to DynamoDB. It uses the primary key from the relational database as the partition key in Amazon DynamoDB and creates an attribute for each column in the source database. When using map-record-to-record
, for any column in the source table not listed in the exclude-columns
attribute list, AWS DMS creates a corresponding attribute on the target DynamoDB instance regardless of whether that source column is used in an attribute mapping.
API Version API Version 2016-01-01
107
AWS Database Migration Service User Guide
Using Object Mapping with DynamoDB
• map-record-to-document puts source columns into a single, flat, DynamoDB map on the target using the attribute name "_doc." When using map-record-to-document
, for any column in the source table not listed in the exclude-columns
attribute list, AWS DMS places the data into a single, flat,
DynamoDB map attribute on the source called “_doc”.
One way to understand the difference between the rule-action
parameters map-record-to-record and map-record-to-document is to see the two parameters in action. For this example, assume you are starting with a relational database table row with the following structure and data:
To migrate this information to DynamoDB, you would create rules to map the data into a DynamoDB table item. Note the columns listed for the exclude-columns
parameter. These columns are not directly mapped over to the target; instead, attribute mapping is used to combine the data into new items, such as where FirstName and LastName are grouped together to become CustomerName on the DynamoDB target. Note also that NickName and income are not excluded.
{
"rules": [
{
"rule-type": "object-mapping",
"rule-id": "1",
"rule-name": "TransformToDDB",
"rule-action": "map-record-to-record",
"object-locator": {
"schema-name": "test",
"table-name": "customer",
},
"target-table-name": "customer_t",
"mapping-parameters": {
"partition-key-name": "CustomerName",
"exclude-columns": [
"FirstName",
"LastName",
"HomeAddress",
"HomePhone",
"WorkAddress",
"WorkPhone"
],
"attribute-mappings": [
{
"target-attribute-name": "CustomerName",
"attribute-type": "scalar",
"attribute-sub-type": "string",
"value": "${FirstName},${LastName}"
},
{
"target-attribute-name": "ContactDetails",
"attribute-type": "document",
"attribute-sub-type": "dynamodb-map",
"value": {
"M": {
“Home": {
"M": {
"Address": {
"S": "${HomeAddress}"
},
"Phone": {
"S": "${HomePhone}"
API Version API Version 2016-01-01
108
AWS Database Migration Service User Guide
Using Object Mapping with DynamoDB
}
}
},
"Work": {
"M": {
"Address": {
"S": "${WorkAddress}"
},
"Phone": {
"S": "${WorkPhone}"
}
}
}
}
}
}
]
}
}
]
}
By using the rule-action
parameter map-record-to-record, the data for NickName and income are mapped to items of the same name in the DynamoDB target.
If you use the exact same rules but change the rule-action
parameter to map-record-to-document, the columns not listed in the exclude-columns
parameter, NickName and income, are mapped to a _doc item.
API Version API Version 2016-01-01
109
AWS Database Migration Service User Guide
Using Object Mapping with DynamoDB
Using Custom Condition Expressions with Object Mapping
You can use a feature of Amazon DynamoDB called conditional expressions to manipulate data that is being written to a DynamoDB table. For more information about condition expressions in DynamoDB, see Condition Expressions .
A condition expression member consists of:
• an expression (required)
• expression attribute values (optional) . Specifies a DynamoDB json structure of the attribute value
• expression attribute names (optional)
• options for when to use the condition expression (optional). The default is apply-during-cdc = false and apply-during-full-load = true
The structure for the rule is as follows:
"target-table-name": "customer_t",
"mapping-parameters": {
"partition-key-name": "CustomerName",
"condition-expression": {
"expression":"<conditional expression>",
"expression-attribute-values": [
{
"name":"<attribute name>",
"value":<attribute value>
}
],
"apply-during-cdc":<optional Boolean value>,
"apply-during-full-load": <optional Boolean value>
}
The following sample highlights the sections used for condition expression.
API Version API Version 2016-01-01
110
AWS Database Migration Service User Guide
Using Object Mapping with DynamoDB
Using Attribute Mapping with Object Mapping
Attribute mapping lets you specify a template string using source column names to restructure data on the target. There is no formatting done other than what the user specifies in the template.
The following example shows the structure of the source database and the desired structure of the
DynamoDB target. First is shown the structure of the source, in this case an Oracle database, and then the desired structure of the data in DynamoDB. The example concludes with the JSON used to create the desired target structure.
The structure of the Oracle data is as follows:
Oracle
FirstName LastName StoreId
PrimaryKey
Randy Marsh
N/A
5
HomeAddressHomePhone WorkAddressWorkPhone DateOfBirth
221B
Baker
Street
123456789031
Spooner
Street,
Quahog
987654321002/29/1988
API Version API Version 2016-01-01
111
AWS Database Migration Service User Guide
Using Object Mapping with DynamoDB
The structure of the DynamoDB data is as follows:
DynamoDB
CustomerName
HashKey
Randy,Marsh
StoreId
SortKey
5
ContactDetails
{
N/A
"Name":Randy,
"Home":{
"Address":"221B Baker
Street",
"Phone":1234567890
},
"Work":{
"Address":"31 Spooner
Street, Quahog",
}
}
"Phone":9876541230
DateOfBirth
02/29/1988
The following JSON shows the object mapping and column mapping used to achieve the DynamoDB structure:
{
"rules": [
{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "Test",
"table-name": "%"
},
"rule-action": "include"
}
]
{
{
"rule-type": "object-mapping",
"rule-id": "1",
"rule-name": "TransformToDDB",
"rule-action": "map-record-to-record",
"object-locator": {
"owner-name": "test",
"table-name": "customer",
},
"target-table-name": "customer_t",
"mapping-parameters": {
API Version API Version 2016-01-01
112
AWS Database Migration Service User Guide
Using Object Mapping with DynamoDB
"partition-key-name": "CustomerName",
"sort-key-name": "StoreId",
"exclude-columns": [
"FirstName", "LastName", "HomeAddress", "HomePhone", "WorkAddress", "WorkPhone"
],
"attribute-mappings": [
{
"target-attribute-name": "CustomerName",
"attribute-type": "scalar",
"attribute-sub-type": "string",
"value":
"${FirstName},${LastName}"
},
{
"target-attribute-name": "StoreId",
"attribute-type": "scalar",
"attribute-sub-type": "string",
"value":
"${StoreId}"
},
{
"target-attribute-name": "ContactDetails",
"attribute-type": "scalar",
"attribute-sub-type": "string",
"value":
"{
\"Name\":\"${FirstName}\",
\"Home\":{
\"Address\":\"${HomeAddress}\",
\"Phone\":\"${HomePhone}\"
},
\"Work\":{
\"Address\":\"${WorkAddress}\",
\"Phone\":\"${WorkPhone}\"
}
}”
},
{
"target-attribute-name": "StoreId",
"attribute-type": "scalar",
"attribute-sub-type": "string",
"value": {
"${StoreId}"
}
}
]
}
}
]
}
Another way to use column mapping is to use DynamoDB format as your document type. The following code example uses dynamodb-map as the attribute-sub-type
for attribute mapping.
{
"rules": [
{
"rule-type": "object-mapping",
"rule-id": "1",
"rule-name": "TransformToDDB",
"rule-action": "map-record-to-record",
API Version API Version 2016-01-01
113
AWS Database Migration Service User Guide
Using Object Mapping with DynamoDB
"object-locator": {
"schema-name": "test",
"table-name": "customer",
},
"target-table-name": "customer_t",
"mapping-parameters": {
"partition-key-name": "CustomerName",
"sort-key-name": "StoreId",
"exclude-columns": [
"FirstName",
"LastName",
"HomeAddress",
"HomePhone",
"WorkAddress",
"WorkPhone"
],
"attribute-mappings": [
{
"target-attribute-name": "CustomerName",
"attribute-type": "scalar",
"attribute-sub-type": "string",
"value": "${FirstName},${LastName}"
},
{
"target-attribute-name": "StoreId",
"attribute-type": "scalar",
"attribute-sub-type": "string",
"value": "${StoreId}"
},
{
"target-attribute-name": "ContactDetails",
"attribute-type": "document",
"attribute-sub-type": "dynamodb-map",
"value": {
"M": {
"Name": {
"S": "${FirstName}"
}"Home": {
"M": {
"Address": {
"S": "${HomeAddress}"
},
"Phone": {
"S": "${HomePhone}"
}
}
},
"Work": {
"M": {
"Address": {
"S": "${WorkAddress}"
},
"Phone": {
"S": "${WorkPhone}"
}
}
}
}
}
}
]
}
}
]
}
API Version API Version 2016-01-01
114
AWS Database Migration Service User Guide
Using Object Mapping with DynamoDB
Example 1: Using Attribute Mapping with Object Mapping
The following example migrates data from two MySQL database tables, nfl_data and sport_team , to two
DynamoDB table called NFLTeams and SportTeams. The structure of the tables and the JSON used to map the data from the MySQL database tables to the DynamoDB tables are shown following.
The structure of the MySQL database table nfl_data is shown below: mysql> desc nfl_data;
+---------------+-------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+---------------+-------------+------+-----+---------+-------+
| Position | varchar(5) | YES | | NULL | |
| player_number | smallint(6) | YES | | NULL | |
| Name | varchar(40) | YES | | NULL | |
| status | varchar(10) | YES | | NULL | |
| stat1 | varchar(10) | YES | | NULL | |
| stat1_val | varchar(10) | YES | | NULL | |
| stat2 | varchar(10) | YES | | NULL | |
| stat2_val | varchar(10) | YES | | NULL | |
| stat3 | varchar(10) | YES | | NULL | |
| stat3_val | varchar(10) | YES | | NULL | |
| stat4 | varchar(10) | YES | | NULL | |
| stat4_val | varchar(10) | YES | | NULL | |
| team | varchar(10) | YES | | NULL | |
+---------------+-------------+------+-----+---------+-------+
The structure of the MySQL database table sport_team is shown below: mysql> desc sport_team;
+---------------------------+--------------+------+-----+---------+----------------+
| Field | Type | Null | Key | Default | Extra |
+---------------------------+--------------+------+-----+---------+----------------+
| id | mediumint(9) | NO | PRI | NULL | auto_increment |
| name | varchar(30) | NO | | NULL | |
| abbreviated_name | varchar(10) | YES | | NULL | |
| home_field_id | smallint(6) | YES | MUL | NULL | |
| sport_type_name | varchar(15) | NO | MUL | NULL | |
| sport_league_short_name | varchar(10) | NO | | NULL | |
| sport_division_short_name | varchar(10) | YES | | NULL | |
The table mapping rules used to map the two tables to the two DynamoDB tables is shown below:
{
"rules":[
{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "dms_sample",
"table-name": "nfl_data"
API Version API Version 2016-01-01
115
AWS Database Migration Service User Guide
Using Object Mapping with DynamoDB
},
"rule-action": "include"
},
{
"rule-type": "selection",
"rule-id": "2",
"rule-name": "2",
"object-locator": {
"schema-name": "dms_sample",
"table-name": "sport_team"
},
"rule-action": "include"
},
{
"rule-type":"object-mapping",
"rule-id":"3",
"rule-name":"MapNFLData",
"rule-action":"map-record-to-record",
"object-locator":{
"schema-name":"dms_sample",
"table-name":"nfl_data"
},
"target-table-name":"NFLTeams",
"mapping-parameters":{
"partition-key-name":"Team",
"sort-key-name":"PlayerName",
"exclude-columns": [
"player_number", "team", "Name"
],
"attribute-mappings":[
{
"target-attribute-name":"Team",
"attribute-type":"scalar",
"attribute-sub-type":"string",
"value":"${team}"
},
{
"target-attribute-name":"PlayerName",
"attribute-type":"scalar",
"attribute-sub-type":"string",
"value":"${Name}"
},
{
"target-attribute-name":"PlayerInfo",
"attribute-type":"scalar",
"attribute-sub-type":"string",
"value":"{\"Number\": \"${player_number}\",\"Position\": \"${Position}\",
\"Status\": \"${status}\",\"Stats\": {\"Stat1\": \"${stat1}:${stat1_val}\",\"Stat2\":
\"${stat2}:${stat2_val}\",\"Stat3\": \"${stat3}:${ stat3_val}\",\"Stat4\": \"${stat4}:${stat4_val}\"}"
}
]
}
},
{
"rule-type":"object-mapping",
"rule-id":"4",
"rule-name":"MapSportTeam",
"rule-action":"map-record-to-record",
"object-locator":{
"schema-name":"dms_sample",
"table-name":"sport_team"
},
"target-table-name":"SportTeams",
"mapping-parameters":{
"partition-key-name":"TeamName",
API Version API Version 2016-01-01
116
AWS Database Migration Service User Guide
Using Object Mapping with DynamoDB
"exclude-columns": [
"name", "id"
],
"attribute-mappings":[
{
"target-attribute-name":"TeamName",
"attribute-type":"scalar",
"attribute-sub-type":"string",
"value":"${name}"
},
{
"target-attribute-name":"TeamInfo",
"attribute-type":"scalar",
"attribute-sub-type":"string",
"value":"{\"League\": \"${sport_league_short_name}\",\"Division\":
\"${sport_division_short_name}\"}"
}
]
}
}
]
}
The sample output for the NFLTeams DynamoDB table is shown below:
"PlayerInfo": "{\"Number\": \"6\",\"Position\": \"P\",\"Status\": \"ACT\",\"Stats\":
{\"Stat1\": \"PUNTS:73\",\"Stat2\": \"AVG:46\",\"Stat3\": \"LNG:67\",\"Stat4\": \"IN
20:31\"}",
"PlayerName": "Allen, Ryan",
"Position": "P",
"stat1": "PUNTS",
"stat1_val": "73",
"stat2": "AVG",
"stat2_val": "46",
"stat3": "LNG",
"stat3_val": "67",
"stat4": "IN 20",
"stat4_val": "31",
"status": "ACT",
"Team": "NE"
}
The sample output for the SportsTeams DynamoDB table is shown below:
{
"abbreviated_name": "IND",
"home_field_id": 53,
"sport_division_short_name": "AFC South",
"sport_league_short_name": "NFL",
"sport_type_name": "football",
"TeamInfo": "{\"League\": \"NFL\",\"Division\": \"AFC South\"}",
"TeamName": "Indianapolis Colts"
}
API Version API Version 2016-01-01
117
AWS Database Migration Service User Guide
Working with AWS DMS Tasks
An AWS Database Migration Service (AWS DMS) task is where all the work happens. You use tasks to specify what tables and schemas to use for your migration and to apply specific replication requirements to a database migration. To create a replication task, you must have at least one source and one target database to work with AWS DMS. You must also have a replication instance set up. Then, you can configure the task using task settings and specify tables to be replicated.
Once you create a task, you can run it immediately. The target tables with the necessary metadata definitions are automatically created and loaded, and you can specify that the CDC replication process be started. You can monitor, stop, or restart replication tasks using the AWS DMS console, AWS CLI, or AWS
DMS API.
The following are features you can use when performing an AWS DMS task
Task
Choosing a Task Migration Method
When you create a task, you specify the migration method, which includes either a full load of the existing data, a full load of the data plus ongoing changes, or just a replication of the ongoing changes.
Running Multiple Tasks
In some migration scenarios, you might have to create several migration tasks.
Modifying a Task
When a task is stopped, you can modify the settings for the task.
Reloading Tables During a Task
You can reload a table during a task if an error occurs during the task.
Using Table Mapping
Relevant Documentation
Migration Methods for AWS Database Migration
Creating Multiple Tasks (p. 121)
Reloading Tables During a Task (p. 120)
Selection Rules
API Version API Version 2016-01-01
118
AWS Database Migration Service User Guide
Modifying a Task
Task
Table mapping uses several types of rules to specify the data source, source schema, data, and any transformations that should occur during the task.
Relevant Documentation
Selection Rules and Actions (p. 138)
Transformation Rules
Transformation Rules and Actions (p. 139)
Applying Filters
You can use source filters to limit the number and type of records transferred from your source to your target.
For example, you can specify that only employees with a location of headquarters are moved to the target database. You apply filters on a column of data.
Applying Task Settings
Each task has settings that you can configure according to the needs of your database migration. You create these settings in a JSON file or, with some settings, you can specify the settings using the AWS DMS console.
Monitoring a Task
Task Settings for AWS Database Migration Service
There are several ways to get information on the performance of a task and the tables used by the task.
Monitoring AWS Database Migration Service Tasks (p. 148)
For more information, see the following topics:
Topics
•
•
Reloading Tables During a Task (p. 120)
•
Creating Multiple Tasks (p. 121)
•
Migration Methods for AWS Database Migration Service (p. 122)
•
Task Settings for AWS Database Migration Service Tasks (p. 122)
•
Using Table Mapping with an Task to Select and Filter Data (p. 133)
Modifying a Task
You can modify a task if you need to change the task settings, table mapping, or other settings. You modify a task in the DMS console by selecting the task and choosing
Modify. You can also use the AWS
CLI or AWS DMS API command
ModifyReplicationTask
.
There are a few limitations to modifying a task. These include:
• You cannot modify the source or target endpoint of a task.
• You cannot change the migration type from CDC to either Full_Load or Full_Load_and_CDC.
• You cannot change the migration type from Full Load to either CDC or Full_Load_and_CDC.
• A task that have been run must have a status of Stopped or Failed to be modified.
API Version API Version 2016-01-01
119
AWS Database Migration Service User Guide
Reloading Tables During a Task
Reloading Tables During a Task
While a task is running, you can reload a target database table using data from the source. You may want to reload a table if, during the task, an error occurs or data changes due to partition operations (for example, when using Oracle). You can reload up to 10 tables from a task.
To reload a table, the following conditions must apply:
• The task must be running.
• The migration method for the task must be either Full Load or Full Load with CDC.
• Duplicate tables are not allowed.
AWS Management Console
To reload a table using the AWS DMS console
1. Sign in to the AWS Management Console and choose AWS DMS. Note that if you are signed in as an AWS Identity and Access Management (IAM) user, you must have the appropriate permissions to access AWS DMS. For more information on the permissions required, see
.
2. Select Tasks from the navigation pane.
3. Select the running task that has the table you want to reload.
4. Click the Table Statistics tab.
API Version API Version 2016-01-01
120
AWS Database Migration Service User Guide
Creating Multiple Tasks
5. Select the table you want to reload. Note that if the task is no longer running, you will not be able to reload the table.
6. Choose Drop and reload table data.
When AWS DMS is preparing to reload a table, the console changes the table status to
The table is being
reloaded.
Creating Multiple Tasks
In some migration scenarios, you might have to create several migration tasks. Note that tasks work independently and can run concurrently; each task has its own initial load, CDC, and log reading process.
Tables that are related through data manipulation language (DML) must be part of the same task.
Some reasons to create multiple tasks for a migration include the following:
• The target tables for the tasks reside on different databases, such as when you are fanning out or breaking a system into multiple systems.
• You want to break the migration of a large table into multiple tasks by using filtering.
Note
Because each task has its own change capture and log reading process, changes are not coordinated across tasks. Therefore, when using multiple tasks to perform a migration, make sure that source transactions are wholly contained within a single task.
API Version API Version 2016-01-01
121
AWS Database Migration Service User Guide
Migration Methods
Migration Methods for AWS Database Migration
Service
AWS Database Migration Service can migrate your data in several ways:
• Migrating Data to the Target Database – This process creates files or tables in the target database, automatically defines the metadata that is required at the target, and populates the tables with data from the source. The data from the tables is loaded in parallel for improved efficiency. This process is the Migrate existing data option in the AWS console and is called
Full Load
in the API.
• Capturing Changes During Migration – This process captures changes to the source database that occur while the data is being migrated from the source to the target. When the migration of the originally requested data has completed, the change data capture (CDC) process then applies the captured changes to the target database. Changes are captured and applied as units of single committed transactions, and several different target tables can be updated as a single source commit.
This approach guarantees transactional integrity in the target database. This process is the
Migrate
existing data and replicate ongoing changes option in the AWS console and is called full-load-andcdc
in the API.
• Replicating Only Data Changes on the Source Database – This process reads the recovery log file of the source database management system (DBMS) and groups together the entries for each transaction. If AWS DMS can't apply changes to the target within a reasonable time (for example, if the target is not accessible), AWS DMS buffers the changes on the replication server for as long as necessary. It doesn't reread the source DBMS logs, which can take a large amount of time. This process is the Replicate data changes only option in the AWS DMS console.
Note
If you restart a task, any tables that have not completed their initial load are restarted.
Task Settings for AWS Database Migration Service
Tasks
Each task has settings that you can configure according to the needs of your database migration. You create these settings in a JSON file or, with some settings, you can specify the settings using the AWS
DMS console.
There are several main types of task settings:
•
Target Metadata Task Settings (p. 123)
•
Full Load Task Settings (p. 123)
•
Logging Task Settings (p. 124)
•
Control Table Task Settings (p. 125)
•
Change Processing Tuning Settings (p. 128)
•
Stream Buffer Task Settings (p. 128)
•
Change Processing DDL Handling Policy Task Settings (p. 129)
•
Error Handling Task Settings (p. 129)
To see an example JSON file with sample task settings, see
.
API Version API Version 2016-01-01
122
AWS Database Migration Service User Guide
Target Metadata Task Settings
Target Metadata Task Settings
Target metadata settings include the following:
•
TargetSchema
– The target table schema name. If this metadata option is empty, the schema from the source table is used. AWS DMS automatically adds the owner prefix for the target database to all tables if no source schema is defined. This option should be left empty for MySQL-type target endpoints.
•
LOB settings
– Settings that determine how large objects (LOBs) are managed. If you set
SupportLobs=true
, you must set one of the following to true
:
•
FullLobMode
– If you set this option to true
, then you must enter a value for the
LobChunkSize option. Enter the size, in kilobytes, of the LOB chunks to use when replicating the data to the target.
The
FullLobMode
option works best for very large LOB sizes but tends to cause slower loading.
•
LimitedSizeLobMode
– If you set this option to true
, then you must enter a value for the
LobMaxSize option. Enter the maximum size, in kilobytes, for an individual LOB.
•
LoadMaxFileSize
– An option for PostgreSQL and MySQL target endpoints that defines the maximum size on disk of stored, unloaded data, such as .csv files. This option overrides the connection attribute.
You can provide values from 0, which indicates that this option doesn't override the connection attribute, to 100,000 KB.
•
BatchApplyEnabled
– Determines if each transaction is applied individually or if changes are committed in batches. The default value is false
.
If set to true
, AWS DMS commits changes in batches by a pre-processing action that groups the transactions into batches in the most efficient way. Setting this value to true
can affect transactional integrity, so you must select
BatchApplyPreserveTransaction
in the
ChangeProcessingTuning
section to specify how the system handles referential integrity issues.
If set to false
, AWS DMS applies each transaction individually, in the order it is committed. In this case, strict referential integrity is ensured for all tables.
When LOB columns are included in the replication,
BatchApplyEnabled can only be used in
Limited-
size LOB mode.
Full Load Task Settings
Full load settings include the following:
• To enable or disable full load and change data capture (CDC), set the following:
•
FullLoadEnabled
– Set this option to true
if the task needs to perform a full load on target tables.
•
ApplyChangesEnabled
– Set this option to true
if the task needs to keep target tables up-to-date by applying changes using CDC.
If both
FullLoadEnabled=true
and
ApplyChangesEnabled=true
, the task loads the tables first and then keeps applying incoming changes. While updating a task, you can use these settings only to toggle on and off full load or CDC, or both.
• To indicate how to handle loading the target at full-load startup, specify one of the following values for the
TargetTablePrepMode
option:
•
DO_NOTHING
– Data and metadata of the existing target table are not affected.
•
DROP_AND_CREATE
– The existing table is dropped and a new table is created in its place.
•
TRUNCATE_BEFORE_LOAD
– Data is truncated without affecting the table metadata.
• To delay primary key or unique index creation until after full load completes, set the
CreatePkAfterFullLoad
option.
When this option is selected, you cannot resume incomplete full load tasks.
API Version API Version 2016-01-01
123
AWS Database Migration Service User Guide
Logging Task Settings
• For full load and CDC-enabled tasks, you can set the following
Stop task after full load completes options:
•
StopTaskCachedChangesApplied
– Set this option to true
to stop a task after a full load completes and cached changes are applied.
•
StopTaskCachedChangesNotApplied
– Set this option to true
to stop a task before cached changes are applied.
• To allow tables to resume processing from the point of interruption during a full load, set the
ResumeEnabled
option to true
. Otherwise, table loading restarts from the beginning.
Allowing table loading to restart from the point of interruption can cause a slowdown in full-load processing. However, starting extremely large tables from the beginning can cause long delays in completing the full load. In addition, for a table load to be restarted from the point of interruption, the table must have a unique index, and we also recommend that it have a clustered primary key.
If
ResumeEnabled
is set to true
, the following options should be set:
•
ResumeMinTableSize
– Indicates which tables should resume loading when the full-load operation begins again. Tables with fewer rows than the number set for this option restart the full load. The default value is 1,000,000.
•
ResumeOnlyClusteredPKTables
– Indicates whether to resume loading only tables that have clustered primary keys.
• To indicate the maximum number of tables to load in parallel, set the
MaxFullLoadSubTasks
option.
• To set the number of seconds that AWS DMS waits for transactions to close before beginning a fullload operation, if transactions are open when the task starts, set the
TransactionConsistencyTimeout option. The default value is 600 (10 minutes). AWS DMS begins the full load after the timeout value is reached, even if there are open transactions.
• To indicate the maximum number of events that can be transferred together, set the
CommitRate option.
Logging Task Settings
Logging task settings are written to a JSON file and they let you specify which component activities are logged and what amount of information is written to the log. The logging feature uses Amazon
CloudWatch to log information during the migration process.
There are several ways to enable Amazon CloudWatch logging. You can select the
EnableLogging
option on the AWS Management Console when you create a migration task or set the
EnableLogging
option to true
when creating a task using the AWS DMS API. You can also specify
"EnableLogging": true
in the
JSON of the logging section of task settings.
You can specify logging for the following component activities:
• SOURCE_UNLOAD — Data is unloaded from the source database.
• SOURCE_CAPTURE — Data is captured from the source database.
• TARGET_LOAD — Data is loaded into the target database.
• TARGET_APPLY — Data and DDL are applied to the target database.
• TASK_MANAGER — The task manager triggers an event.
Once you specify a component activity, you can then specify the amount of information that is logged.
The following list is in order from the lowest level of information to the highest level of information. The higher levels always include information from the lower levels. These severity values include:
• LOGGER_SEVERITY_ERROR — Error messages are written to the log.
• LOGGER_SEVERITY_WARNING — Warnings and error messages are written to the log.
API Version API Version 2016-01-01
124
AWS Database Migration Service User Guide
Control Table Task Settings
• LOGGER_SEVERITY_INFO — Informational messages, warnings, and error messages are written to the log.
• LOGGER_SEVERITY_DEFAULT — Debug messages, informational messages, warnings, and error messages are written to the log.
• LOGGER_SEVERITY_DEBUG — Debug messages, informational messages, warnings, and error messages are written to the log.
• LOGGER_SEVERITY_DETAILED_DEBUG — All information is written to the log.
For example, the following JSON section gives task settings for logging for all component activities:
…
"Logging": {
"EnableLogging": true,
"LogComponents": [{
"Id": "SOURCE_UNLOAD",
"Severity": "LOGGER_SEVERITY_DEFAULT"
},{
"Id": "SOURCE_CAPTURE",
"Severity": "LOGGER_SEVERITY_DEFAULT"
},{
"Id": "TARGET_LOAD",
"Severity": "LOGGER_SEVERITY_DEFAULT"
},{
"Id": "TARGET_APPLY",
"Severity": "LOGGER_SEVERITY_INFO"
},{
"Id": "TASK_MANAGER",
"Severity": "LOGGER_SEVERITY_DEBUG"
}]
},
…
Control Table Task Settings
Control tables provide information about the AWS DMS task, as well as useful statistics that you can use to plan and manage both the current migration task and future tasks. You can apply these task settings in a JSON file or using the Advanced Settings link on the Create task page in the AWS DMS console. In addition to the Apply Exceptions (dmslogs.awsdms_apply_exceptions) table, which is always created, you can choose to create additional tables including the following:
• Replication Status (dmslogs.awsdms_status) – This table provides details about the current task including task status, amount of memory consumed by the task, number of changes not yet applied to the target, and the position in the source database from which AWS DMS is currently reading. It also indicates if the task is a full load or change data capture (CDC).
• Suspended Tables (dmslogs.awsdms_suspended_tables) – This table provides a list of suspended tables as well as the reason they were suspended.
• Replication History (dmslogs.awsdms_history) – This table provides information about the replication history including the number and volume of records processed during the task, latency at the end of a CDC task, and other statistics.
The Apply Exceptions (dmslogs.awsdms_apply_exceptions) table contains the following parameters:
Column
TASK_NAME
Type
nvchar
Description
The name of the AWS DMS task.
API Version API Version 2016-01-01
125
AWS Database Migration Service User Guide
Control Table Task Settings
Column
TABLE_OWNER
TABLE_NAME
ERROR_TIME
STATEMENT
ERROR
Type
nvchar nvchar timestamp nvchar nvchar
Description
The table owner.
The table name.
The time the exception (error) occurred.
The statement that was being run when the error occurred.
The error name and description.
The Replication History (dmslogs.awsdms_history) table contains the following parameters:
Column
SERVER_NAME
TASK_NAME
TIMESLOT_TYPE
Type
nvchar nvchar varchar
Description
The name of the machine where the replication task is running.
The name of the AWS DMS task.
One of the following values:
• FULL LOAD
• CHANGE PROCESSING (CDC)
TIMESLOT
TIMESLOT_DURATION
TIMESLOT_LATENCY
RECORDS
TIMESLOT_VOLUME timestamp int int int int
If the task is running both full load and CDC, two history records are written to the time slot.
The ending timestamp of the time slot.
The duration of the time slot.
The target latency at the end of the time slot. This value is only applicable to CDC time slots.
The number of records processed during the time slot.
The volume of data processed in MB.
The Replication Status (dmslogs.awsdms_status) table contains the current status of the task and the target database. It has the following settings:
Column
SERVER_NAME
TASK_NAME
Type
nvchar nvchar
Description
The name of the machine where the replication task is running.
The name of the AWS DMS task.
API Version API Version 2016-01-01
126
AWS Database Migration Service User Guide
Control Table Task Settings
Column
TASK_STATUS
STATUS_TIME
PENDING_CHANGES
DISK_SWAP_SIZE
TASK_MEMORY
SOURCE_CURRENT
_POSITION
SOURCE_CURRENT
_TIMESTAMP
SOURCE_TAIL
_POSITION
SOURCE_TAIL
_TIMESTAMP
SOURCE_TIMESTAMP
_APPLIED
Type
varchar timestamp int int int varchar timestamp varchar timestamp timestamp
Description
One of the following values:
• FULL LOAD
• CHANGE PROCESSING (CDC)
Task status is set to FULL LOAD as long as there is at least one table in full load. After all tables have been loaded, the task status changes to CHANGE PROCESSING if CDC is enabled.
The timestamp of the task status.
The number of change records that were not applied to the target.
The amount of disk space used by old or offloaded transactions.
Current memory used, in MB.
The position in the source database that AWS DMS is currently reading from.
The timestamp in the source database that AWS DMS is currently reading from.
The position of the oldest start transaction that is not committed.
This value is the newest position that you can revert to without losing any changes.
The timestamp of the oldest start transaction that is not committed.
This value is the newest timestamp that you can revert to without losing any changes..
The timestamp of the last transaction commit. In a bulk apply process, this value is the timestamp for the commit of the last transaction in the batch.
Additional control table settings include the following:
•
ControlSchema
– Use this option to indicate the database schema name for the AWS DMS target
Control Tables. If you do not enter any information in this field, then the tables are copied to the default location in the database.
•
HistoryTimeslotInMinutes
– Use this option to indicate the length of each time slot in the Replication
History table. The default is 5 minutes.
API Version API Version 2016-01-01
127
AWS Database Migration Service User Guide
Stream Buffer Task Settings
Stream Buffer Task Settings
You can set stream buffer settings using the AWS CLI, include the following:
•
StreamBufferCount
– Use this option to specify the number of data stream buffers for the migration task. The default stream buffer number is 3. Increasing the value of this setting may increase the speed of data extraction. However, this performance increase is highly dependent on the migration environment, including the source system and instance class of the replication server. The default is sufficient for most situations.
•
StreamBufferSizeInMB
– Use this option to indicate the maximum size of each data stream buffer. The default size is 8 MB. You might need to increase the value for this option when you work with very large LOBs or if you receive a message in the log files stating that the stream buffer size is insufficient.
When calculating the size of this option you can use the following equation: [Max LOB size (or LOB chunk size)]*[number of LOB columns]*[number of stream buffers]*[number of tables loading in parallel per task(MaxFullLoadSubTasks)]*3
•
CtrlStreamBufferSizeInMB
– Use this option to set the size of the control stream buffer. Value is in
MB, and can be from 1 to 8. The default value is 5. You may need to increase this when working with a very large number of tables, such as tens of thousands of tables.
Change Processing Tuning Settings
The following settings determine how AWS DMS handles changes for target tables during change data capture (CDC). Several of these settings depend on the value of the target metadata parameter
BatchApplyEnabled
. For more information on the
BatchApplyEnabled
parameter, see
.
Change processing tuning settings include the following:
The following settings apply only when the target metadata parameter
BatchApplyEnabled
is set to true
.
•
BatchApplyPreserveTransaction
– If set to true
, transactional integrity is preserved and a batch is guaranteed to contain all the changes within a transaction from the source. The default value is true
.
If set to false
, there can be temporary lapses in transactional integrity to improve performance. There is no guarantee that all the changes within a transaction from the source will be applied to the target in a single batch.
•
BatchApplyTimeoutMin
– Sets the minimum amount of time in seconds that AWS DMS waits between each application of batch changes. The default value is 1.
•
BatchApplyTimeoutMax
– Sets the maximum amount of time in seconds that AWS DMS waits between each application of batch changes before timing out. The default value is 30.
•
BatchApplyMemoryLimit
– Sets the maximum amount of memory in (MB) to use for pre-processing in
Batch optimized apply mode. The default value is 500.
•
BatchSplitSize
– Sets the number of changes applied in a single change processing statement. Select the check box and then optionally change the default value. The default value is 10,000. A value of 0 means there is no limit applied.
The following settings apply only when the target metadata parameter
BatchApplyEnabled
is set to false
.
•
MinTransactionSize
– Sets the minimum number of changes to include in each transaction. The default value is 1000.
•
CommitTimeout
– Sets the maximum time in seconds for AWS DMS to collect transactions in batches before declaring a timeout. The default value is 1.
API Version API Version 2016-01-01
128
AWS Database Migration Service User Guide
Change Processing DDL Handling Policy Task Settings
•
HandleSourceTableAltered
– Set this option to true
to alter the target table when the source table is altered.
AWS DMS attempts to keep transaction data in memory until the transaction is fully committed to the source and/or the target. However, transactions that are larger than the allocated memory or that are not committed within the specified time limit are written to disk.
The following settings apply to change processing tuning regardless of the change processing mode.
•
MemoryLimitTotal
– Sets the maximum size (in MB) that all transactions can occupy in memory before being written to disk. The default value is 1024.
•
MemoryKeepTime
– Sets the maximum time in seconds that each transaction can stay in memory before being written to disk. The duration is calculated from the time that AWS DMS started capturing the transaction. The default value is 60.
•
StatementCacheSize
– Sets the maximum number of prepared statements to store on the server for later execution when applying changes to the target. The default value is 50. The maximum value is
200.
Change Processing DDL Handling Policy Task Settings
The following settings determine how AWS DMS handles DDL changes for target tables during change data capture (CDC). Change processing DDL handling policy settings include the following:
•
HandleSourceTableDropped
– Set this option to true
to drop the target table when the source table is dropped
•
HandleSourceTableTruncated
– Set this option to true
to truncate the target table when the source table is truncated
•
HandleSourceTableAltered
– Set this option to true
to alter the target table when the source table is altered.
Error Handling Task Settings
You can set the error handling behavior of your replication task during change data capture (CDC) using the following settings:
•
DataErrorPolicy
– Determines the action AWS DMS takes when there is an error related to data processing at the record level. Some examples of data processing errors include conversion errors, errors in transformation, and bad data. The default is
LOG_ERROR
.
•
IGNORE_RECORD
– The task continues and the data for that record is ignored. The error counter for the
DataErrorEscalationCount
property is incremented so that if you set a limit on errors for a table, this error will count toward that limit.
•
LOG_ERROR
– The task continues and the error is written to the task log.
•
SUSPEND_TABLE
– The task continues but data from the table with the error record is moved into an error state and the data is not replicated.
•
STOP_TASK
– The task stops and manual intervention is required.
•
DataTruncationErrorPolicy
– Determines the action AWS DMS takes when data is truncated. The default is
LOG_ERROR
.
•
IGNORE_RECORD
– The task continues and the data for that record is ignored. The error counter for the
DataErrorEscalationCount
property is incremented so that if you set a limit on errors for a table, this error will count toward that limit.
•
LOG_ERROR
– The task continues and the error is written to the task log.
API Version API Version 2016-01-01
129
AWS Database Migration Service User Guide
Error Handling Task Settings
•
SUSPEND_TABLE
– The task continues but data from the table with the error record is moved into an error state and the data is not replicated.
•
STOP_TASK
– The task stops and manual intervention is required.
•
DataErrorEscalationPolicy
– Determines the action AWS DMS takes when the maximum number of errors (set in the
DataErrorsEscalationCount
parameter) is reached. The default is
SUSPEND_TABLE
.
•
LOG_ERROR
– The task continues and the error is written to the task log.
•
SUSPEND_TABLE
– The task continues but data from the table with the error record is moved into an error state and the data is not replicated.
•
STOP_TASK
– The task stops and manual intervention is required.
•
DataErrorEscalationCount
– Sets the maximum number of errors that can occur to the data for a specific record. When this number is reached, the data for the table that contains the error record is handled according to the policy set in the
DataErrorEscalationCount
. The default is 0.
•
TableErrorPolicy
– Determines the action AWS DMS takes when an error occurs when processing data or metadata for a specific table. This error only applies to general table data and is not an error that relates to a specific record. The default is
SUSPEND_TABLE
.
•
SUSPEND_TABLE
– The task continues but data from the table with the error record is moved into an error state and the data is not replicated.
•
STOP_TASK
– The task stops and manual intervention is required.
•
TableErrorEscalationPolicy
– Determines the action AWS DMS takes when the maximum number of errors (set using the
TableErrorEscalationCount
parameter). The default and only user setting is
STOP_TASK
, where the task is stopped and manual intervention is required.
•
TableErrorEscalationCount
– The maximum number of errors that can occur to the general data or metadata for a specific table. When this number is reached, the data for the table is handled according to the policy set in the
TableErrorEscalationPolicy
. The default is 0.
•
RecoverableErrorCount
– The maximum number of attempts made to restart a task when an environmental error occurs. After the system attempts to restart the task the designated number of times, the task is stopped and manual intervention is required. Set this value to -1 to attempt a restart six times. Set this value to 0 to never attempt to restart a task. The default is 1.
•
RecoverableErrorInterval
– The number of seconds that AWS DMS waits between attempts to restart a task. The default is 5.
•
RecoverableErrorThrottling
– When enabled, the interval between attempts to restart a task is increased each time a restart is attempted. The default is true
.
•
RecoverableErrorThrottlingMax
– The maximum number of seconds that AWS DMS waits between attempts to restart a task if
RecoverableErrorThrottling
is enabled. The default is 1800.
•
ApplyErrorDeletePolicy
– Determines what action AWS DMS takes when there is a conflict with a
DELETE operation. The default is
IGNORE_RECORD
.
•
IGNORE_RECORD
– The task continues and the data for that record is ignored. The error counter for the
ApplyErrorEscalationCount
property is incremented so that if you set a limit on errors for a table, this error will count toward that limit.
•
LOG_ERROR
– The task continues and the error is written to the task log.
•
SUSPEND_TABLE
– The task continues but data from the table with the error record is moved into an error state and the data is not replicated.
•
STOP_TASK
– The task stops and manual intervention is required.
•
ApplyErrorInsertPolicy
– Determines what action AWS DMS takes when there is a conflict with an
INSERT operation. The default is
LOG_ERROR
.
•
IGNORE_RECORD
– The task continues and the data for that record is ignored. The error counter for the
ApplyErrorEscalationCount
property is incremented so that if you set a limit on errors for a table, this error will count toward that limit.
•
LOG_ERROR
– The task continues and the error is written to the task log.
•
SUSPEND_TABLE
– The task continues but data from the table with the error record is moved into an error state and the data is not replicated.
API Version API Version 2016-01-01
130
AWS Database Migration Service User Guide
Saving Task Settings
•
STOP_TASK
– The task stops and manual intervention is required.
•
UPDATE_RECORD
– If there is an existing target record with the same primary key as the inserted source record, the target record is updated.
•
ApplyErrorUpdatePolicy
– Determines what action AWS DMS takes when there is a conflict with an
UPDATE operation. The default is
LOG_ERROR
.
•
IGNORE_RECORD
– The task continues and the data for that record is ignored. The error counter for the
ApplyErrorEscalationCount
property is incremented so that if you set a limit on errors for a table, this error will count toward that limit.
•
LOG_ERROR
– The task continues and the error is written to the task log.
•
SUSPEND_TABLE
– The task continues but data from the table with the error record is moved into an error state and the data is not replicated.
•
STOP_TASK
– The task stops and manual intervention is required.
•
UPDATE_RECORD
– If the target record is missing, the missing target record will be inserted into the target table. Selecting this option requires full supplemental logging to be enabled for all the source table columns when Oracle is the source database.
•
ApplyErrorEscalationPolicy
– Determines what action AWS DMS takes when the maximum number of errors (set using the
ApplyErrorsEscalationCount
parameter) is reached.
•
LOG_ERROR
– The task continues and the error is written to the task log.
•
SUSPEND_TABLE
– The task continues but data from the table with the error record is moved into an error state and the data is not replicated.
•
STOP_TASK
– The task stops and manual intervention is required.
•
ApplyErrorEscalationCount
– Sets the maximum number of APPLY conflicts that can occur for a specific table during a change process operation. When this number is reached, the data for the table is handled according to the policy set in the
ApplyErrorEscalationPolicy
parameter. The default is 0.
•
FulloadIgnoreConflicts
– Determines if AWS DMS loads the conflicting data when carrying out a fullload operation after the change processing is complete.
Saving Task Settings
You can save the settings for a task as a JSON file, in case you want to reuse the settings for another task.
For example, the following JSON file contains settings saved for a task:
{
"TargetMetadata": {
"TargetSchema": "",
"SupportLobs": true,
"FullLobMode": false,
"LobChunkSize": 64,
"LimitedSizeLobMode": true,
"LobMaxSize": 32,
"BatchApplyEnabled": true
},
"FullLoadSettings": {
"FullLoadEnabled": false,
"ApplyChangesEnabled": true,
"TargetTablePrepMode": "DO_NOTHING",
"CreatePkAfterFullLoad": false,
"StopTaskCachedChangesApplied": false,
"StopTaskCachedChangesNotApplied": false,
"ResumeEnabled": false,
"ResumeMinTableSize": 100000,
"ResumeOnlyClusteredPKTables": true,
API Version API Version 2016-01-01
131
AWS Database Migration Service User Guide
Saving Task Settings
"MaxFullLoadSubTasks": 8,
"TransactionConsistencyTimeout": 600,
"CommitRate": 10000
},
"Logging": {
"EnableLogging": false
},
"ControlTablesSettings": {
"ControlSchema":"",
"HistoryTimeslotInMinutes":5,
"HistoryTableEnabled": false,
"SuspendedTablesTableEnabled": false,
"StatusTableEnabled": false
},
"StreamBufferSettings": {
"StreamBufferCount": 3,
"StreamBufferSizeInMB": 8
},
"ChangeProcessingTuning": {
"BatchApplyPreserveTransaction": true,
"BatchApplyTimeoutMin": 1,
"BatchApplyTimeoutMax": 30,
"BatchApplyMemoryLimit": 500,
"BatchSplitSize": 0,
"MinTransactionSize": 1000,
"CommitTimeout": 1,
"MemoryLimitTotal": 1024,
"MemoryKeepTime": 60,
"StatementCacheSize": 50
},
"ChangeProcessingDdlHandlingPolicy": {
"HandleSourceTableDropped": true,
"HandleSourceTableTruncated": true,
"HandleSourceTableAltered": true
},
"ErrorBehavior": {
"DataErrorPolicy": "LOG_ERROR",
"DataTruncationErrorPolicy":"LOG_ERROR",
"DataErrorEscalationPolicy":"SUSPEND_TABLE",
"DataErrorEscalationCount": 50,
"TableErrorPolicy":"SUSPEND_TABLE",
"TableErrorEscalationPolicy":"STOP_TASK",
"TableErrorEscalationCount": 50,
"RecoverableErrorCount": 0,
"RecoverableErrorInterval": 5,
"RecoverableErrorThrottling": true,
"RecoverableErrorThrottlingMax": 1800,
"ApplyErrorDeletePolicy":"IGNORE_RECORD",
"ApplyErrorInsertPolicy":"LOG_ERROR",
"ApplyErrorUpdatePolicy":"LOG_ERROR",
"ApplyErrorEscalationPolicy":"LOG_ERROR",
"ApplyErrorEscalationCount": 0,
"FullLoadIgnoreConflicts": true
}
}
API Version API Version 2016-01-01
132
AWS Database Migration Service User Guide
Table Mapping
Using Table Mapping with an Task to Select and
Filter Data
Table mapping uses several types of rules to specify the data source, source schema, data, and any transformations that should occur during the task. You can use table mapping to specify individual tables in a database to migrate and the schema to use for the migration. In addition, you can use filters to specify what data from a given table column you want replicated and you can use transformations to modify the data written to the target database.
Selection and Transformation Table Mapping using the AWS Console
You can use the AWS console to perform table mapping, including specifying table selection and transformations. In the AWS Console user interface, you use the Where section to specify the schema, table, and action (include or exclude). You use the Filter section to specify the column name in a table and the conditions you want to apply to the replication task. Together these two actions create a selection rule.
Transformations can be included in a table mapping after you have specified at least one selection rule.
Transformations can be used to rename a schema or table, add a prefix or suffix to a schema or table, or remove a table column.
The following example shows how to set up selection rules for a table called Customers in a schema called EntertainmentAgencySample. Note that the Guided tab, where you create selection rules and transformations, only appears when you have a source endpoint that has schema and table information.
To specify a table selection, filter criteria, and transformations using the AWS console
1. Sign in to the AWS Management Console and choose AWS DMS. Note that if you are signed in as an AWS Identity and Access Management (IAM) user, you must have the appropriate permissions to access AWS DMS. For more information on the permissions required, see
.
2. On the Dashboard page, choose Tasks.
3. Select Create Task.
4. Enter the task information, including Task name, Replication instance, Source endpoint, Target
endpoint, and Migration type. Select Guided from the Table mappings section.
API Version API Version 2016-01-01
133
AWS Database Migration Service User Guide
Selection and Transformation Table
Mapping using the AWS Console
5. In the Table mapping section, select the schema name and table name. You can use the "%" as a wildcard value when specifying the table name. Specify the action to be taken, to include or exclude data defined by the filter.
API Version API Version 2016-01-01
134
AWS Database Migration Service User Guide
Selection and Transformation Table
Mapping using the AWS Console
6. You specify filter information using the Add column filter and the Add condition links. First, select
Add column filter to specify a column and conditions. Select Add condition to add additional conditions. The following example shows a filter for the
Customers
table that includes
AgencyIDs
between
01
and
85
.
API Version API Version 2016-01-01
135
AWS Database Migration Service User Guide
Selection and Transformation Table
Mapping using the AWS Console
7. When you have created the selections you want, select Add selection rule.
8. After you have created at least one selection rule, you can add a transformation to the task. Select
add transformation rule.
9. Select the target you want to transform and enter the additional information requested. The following example shows a transformation that deletes the
AgencyStatus
column from the
Customer
table.
API Version API Version 2016-01-01
136
AWS Database Migration Service User Guide
Selection and Transformation Table
Mapping using the AWS Console
10. Choose Add transformation rule.
11. You can add additional selection rules or transformations by selecting the add selection rule or add
transformation rule. When you are finished, choose Create task.
API Version API Version 2016-01-01
137
AWS Database Migration Service User Guide
Selection and Transformation Table Mapping using JSON
Selection and Transformation Table Mapping using
JSON
Table mappings can be created in the JSON format. If you create a migration task using the AWS DMS
Management Console, you can enter the JSON directly into the table mapping box. If you use the AWS
Command Line Interface (AWS CLI) or AWS Database Migration Service API to perform migrations, you can create a JSON file to specify the table mappings that you want to occur during migration.
You can specify what tables or schemas you want to work with, and you can perform schema and table transformations. You create table mapping rules using the selection
and transformation
rule types.
Selection Rules and Actions
Using table mapping, you can specify what tables or schemas you want to work with by using selection rules and actions. For table mapping rules that use the selection rule type, the following values can be applied:
Parameter
rule-type rule-id rule-name rule-action
Possible Values
selection
A numeric value.
An alpha-numeric value.
include
, exclude
Description
You must have at least one selection rule when specifying a table mapping.
A unique numeric value to identify the rule.
A unique name to identify the rule.
Include or exclude the object selected by the rule.
Example Migrate All Tables in a Schema
The following example migrates all tables from a schema named
Test
in your source to your target endpoint:
{
"rules": [
{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "Test",
"table-name": "%"
},
"rule-action": "include"
}
]
}
Example Migrate Some Tables in a Schema
The following example migrates all tables except those starting with
DMS
from a schema named
Test
in your source to your target endpoint:
{
"rules": [
API Version API Version 2016-01-01
138
AWS Database Migration Service User Guide
Selection and Transformation Table Mapping using JSON
{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "Test",
"table-name": "%"
},
"rule-action": "include"
},
{
"rule-type": "selection",
"rule-id": "2",
"rule-name": "2",
"object-locator": {
"schema-name": "Test",
"table-name": "DMS%"
},
"rule-action": "exclude"
}
]
}
Transformation Rules and Actions
You use the transformation actions to specify any transformations you want to apply to the selected schema or table. Transformation rules are optional.
For table mapping rules that use the transformation rule type, the following values can be applied:
Parameter
rule-type rule-id rule-name object-locator rule-action rule-target value
Possible Values
transformation
A numeric value.
An alpha-numeric value.
schema-name
The name of the schema.
table-name
The name of the table. You can use the "%" percent sign to be a wildcard.
• rename
• remove-column
• convert-lowercase
, convertuppercase
• add-prefix
, remove-prefix
, replace-prefix
• add-suffix
, remove-suffix
, replace-suffix schema
, table
, column
An alpha-numeric value that follows the naming rules for the target type.
Description
Applies a to the object specified by the selection rule.
A unique numeric value to identify the rule.
A unique name to identify the rule.
The schema and table the rule applies to.
The transformation you want to apply to the object. All transformation rule actions are case sensitive.
The type of object you are transforming.
The new value for actions that require input, such as rename
.
API Version API Version 2016-01-01
139
AWS Database Migration Service User Guide
Selection and Transformation Table Mapping using JSON
Parameter
old-value
Possible Values
An alpha-numeric value that follows the naming rules for the target type.
Description
The old value for actions that require replacement, such as replace-prefix
.
Example Rename a Schema
The following example renames a schema from
Test
in your source to
Test1
in your target endpoint:
{
"rules": [
{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "Test",
"table-name": "%"
},
"rule-action": "include"
},
{
"rule-type": "transformation",
"rule-id": "2",
"rule-name": "2",
"rule-action": "rename",
"rule-target": "schema",
"object-locator": {
"schema-name": "Test"
},
"value": "Test1"
}
]
}
Example Rename a Table
The following example renames a table from
Actor
in your source to
Actor1
in your target endpoint:
{
"rules": [
{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "Test",
"table-name": "%"
},
"rule-action": "include"
},
{
"rule-type": "transformation",
"rule-id": "2",
"rule-name": "2",
"rule-action": "rename",
"rule-target": "table",
"object-locator": {
"schema-name": "Test",
"table-name": "Actor"
},
API Version API Version 2016-01-01
140
AWS Database Migration Service User Guide
Selection and Transformation Table Mapping using JSON
"value": "Actor1"
}
]
}
Example Rename a Column
The following example renames a column in table
Actor
from
first_name
in your source to
fname
in your target endpoint:
{
"rules": [
{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "test",
"table-name": "%"
},
"rule-action": "include"
},
{
"rule-type": "transformation",
"rule-id": "4",
"rule-name": "4",
"rule-action": "rename",
"rule-target": "column",
"object-locator": {
"schema-name": "test",
"table-name": "Actor",
"column-name" : "first_name"
},
"value": "fname"
}
]
}
Example Remove a Column
The following example transforms the table named
Actor
in your source to remove all columns starting with the characters
col
from it in your target endpoint:
{
"rules": [{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "test",
"table-name": "%"
},
"rule-action": "include"
}, {
"rule-type": "transformation",
"rule-id": "2",
"rule-name": "2",
"rule-action": "remove-column",
"rule-target": "column",
"object-locator": {
"schema-name": "test",
"table-name": "Actor",
API Version API Version 2016-01-01
141
AWS Database Migration Service User Guide
Selection and Transformation Table Mapping using JSON
"column-name": "col%"
}
}]
}
Example Convert to Lowercase
The following example converts a table name from
ACTOR
in your source to
actor
in your target endpoint:
{
"rules": [{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "test",
"table-name": "%"
},
"rule-action": "include"
}, {
"rule-type": "transformation",
"rule-id": "2",
"rule-name": "2",
"rule-action": "convert-lowercase",
"rule-target": "table",
"object-locator": {
"schema-name": "test",
"table-name": "ACTOR"
}
}]
}
Example Convert to Uppercase
The following example converts all columns in all tables and all schemas from lowercase in your source to uppercase in your target endpoint:
{
"rules": [
{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "test",
"table-name": "%"
},
"rule-action": "include"
},
{
"rule-type": "transformation",
"rule-id": "2",
"rule-name": "2",
"rule-action": "convert-uppercase",
"rule-target": "column",
"object-locator": {
"schema-name": "%",
"table-name": "%",
"column-name": "%"
}
}
API Version API Version 2016-01-01
142
AWS Database Migration Service User Guide
Selection and Transformation Table Mapping using JSON
]
}
Example Add a Prefix
The following example transforms all tables in your source to add the prefix
DMS_
to them in your target endpoint:
{
"rules": [{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "test",
"table-name": "%"
},
"rule-action": "include"
}, {
"rule-type": "transformation",
"rule-id": "2",
"rule-name": "2",
"rule-action": "add-prefix",
"rule-target": "table",
"object-locator": {
"schema-name": "test",
"table-name": "%"
},
}
"value": "DMS_"
}]
Example Replace a Prefix
The following example transforms all columns containing the prefix
Pre_
in your source to replace the prefix with
NewPre_
in your target endpoint:
{
"rules": [
{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "test",
"table-name": "%"
},
"rule-action": "include"
},
{
"rule-type": "transformation",
"rule-id": "2",
"rule-name": "2",
"rule-action": "replace-prefix",
"rule-target": "column",
"object-locator": {
"schema-name": "%",
"table-name": "%",
"column-name": "%"
},
"value": "NewPre_",
"old-value": "Pre_"
API Version API Version 2016-01-01
143
AWS Database Migration Service User Guide
Using Source Filters
}
]
}
Example Remove a Suffix
The following example transforms all tables in your source to remove the suffix
_DMS
from them in your target endpoint:
{
"rules": [{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "test",
"table-name": "%"
},
"rule-action": "include"
}, {
"rule-type": "transformation",
"rule-id": "2",
"rule-name": "2",
"rule-action": "remove-suffix",
"rule-target": "table",
"object-locator": {
"schema-name": "test",
"table-name": "%"
},
"value": "_DMS"
}]
}
Using Source Filters
You can use source filters to limit the number and type of records transferred from your source to your target. For example, you can specify that only employees with a location of headquarters are moved to the target database. Filters are part of a selection rule. You apply filters on a column of data.
Source filters must follow these constraints:
• A selection rule can have no filters or one or more filters.
• Every filter can have one or more filter conditions.
• If more than one filter is used, the list of filters will be combined as if using an AND operator between the filters.
• If more than one filter condition is used within a single filter, the list of filter conditions will be combined as if using an OR operator between the filter conditions.
• Filters are only applied when rule-action = 'include'
.
• Filters require a column name and a list of filter conditions. Filter conditions must have a filter operator and a value.
• Column names, table names, and schema names are case sensitive.
Filtering by Time and Date
When selecting data to import, you can specify a date or time as part of your filter criteria. AWS DMS uses the date format YYYY-MM-DD and the time format YYYY-MM-DD HH:MM:SS for filtering. The AWS
API Version API Version 2016-01-01
144
AWS Database Migration Service User Guide
Using Source Filters
DMS comparison functions follow the SQLite conventions. For more information about SQLite data types and date comparisons, see Datatypes In SQLite Version 3 .
The following example shows how to filter on a date.
Example Single Date Filter
The following filter replicates all employees where empstartdate >= January 1, 2002
to the target database.
{
"rules": [{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "test",
"table-name": "employee"
},
"rule-action": "include",
"filters": [{
"filter-type": "source",
"column-name": "empstartdate",
"filter-conditions": [{
"filter-operator": "gte",
"value": "2002-01-01"
}]
}]
}]
}
Creating Source Filter Rules in JSON
You can create source filters by specifying a column name, filter condition, filter operator, and a filter value.
The following table shows the parameters used for source filtering.
Parameter
filter-type column-name
filter-conditions
filter-operator value
Value
source
The name of the source column you want the filter applied to. The name is case sensitive.
This parameter can be one of the following:
• ste
– less than or equal to
• gte
– greater than or equal to
• eq
– equal to
• between
– equal to or between two values
The value of the filter-operator parameter. If the filter-operator is between
, provide two values, one for start-value and one for end-value.
The following examples show some common ways to use source filters.
API Version API Version 2016-01-01
145
AWS Database Migration Service User Guide
Using Source Filters
Example Single Filter
The following filter replicates all employees where empid >= 100
to the target database.
{
"rules": [{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "test",
"table-name": "employee"
},
"rule-action": "include",
"filters": [{
"filter-type": "source",
"column-name": "empid",
"filter-conditions": [{
"filter-operator": "gte",
"value": "100"
}]
}]
}]
}
Example Multiple Filter Operators
The following filter applies multiple filter operators to a single column of data. The filter replicates all employees where
(empid <=10)
OR
(empid is between 50 and 75)
OR
(empid >= 100)
to the target database.
{
"rules": [{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "test",
"table-name": "employee"
},
"rule-action": "include",
"filters": [{
"filter-type": "source",
"column-name": "empid",
"filter-conditions": [{
"filter-operator": "ste",
"value": "10"
}, {
"filter-operator": "between",
"start-value": "50",
"end-value": "75"
}, {
"filter-operator": "gte",
"value": "100"
}]
}]
}]
}
API Version API Version 2016-01-01
146
AWS Database Migration Service User Guide
Using Source Filters
Example Multiple Filters
The following filter applies multiple filters to two columns in a table. The filter replicates all employees where
(empid <= 100)
AND
(dept= tech)
to the target database.
{
"rules": [{
"rule-type": "selection",
"rule-id": "1",
"rule-name": "1",
"object-locator": {
"schema-name": "test",
"table-name": "employee"
},
"rule-action": "include",
"filters": [{
"filter-type": "source",
"column-name": "empid",
"filter-conditions": [{
"filter-operator": "ste",
"value": "100"
}]
}, {
"filter-type": "source",
"column-name": "dept",
"filter-conditions": [{
"filter-operator": "eq",
"value": "tech"
}]
}]
}]
}
API Version API Version 2016-01-01
147
AWS Database Migration Service User Guide
Task Status
Monitoring AWS Database Migration
Service Tasks
You can monitor the progress of your task by checking the task status and by monitoring the task's control table. For more information about control tables, see
Control Table Task Settings (p. 125)
.
You can also monitor the progress of your tasks using Amazon CloudWatch. By using the AWS
Management Console, the AWS Command Line Interface (CLI), or AWS DMS API, you can monitor the progress of your task and also the resources and network connectivity used.
Finally, you can monitor the status of your source tables in a task by viewing the table state.
For more information, see the following topics.
Topics
•
•
Table State During Tasks (p. 149)
•
Monitoring Tasks Using Amazon CloudWatch (p. 150)
•
Data Migration Service Metrics (p. 152)
•
Logging AWS DMS API Calls Using AWS CloudTrail (p. 155)
Task Status
The task status indicated the condition of the task. The following table shows the possible statuses a task can have:
Task Status
Creating
Running
Stopped
Stopping
Deleting
Description
AWS DMS is creating the task.
The task is performing the migration duties specified.
The task is stopped.
The task is being stopped. This is usually an indication of user intervention in the task.
The task is being deleted, usually from a request for user intervention.
API Version API Version 2016-01-01
148
AWS Database Migration Service User Guide
Table State During Tasks
Task Status
Failed
Starting
Ready
Modifying
Description
The task has failed. See the task log files for more information.
The task is connecting to the replication instance and to the source and target endpoints. Any filters and transformations are being applied.
The task is ready to run. This status usually follows the
"creating" status.
The task is being modified, usually due to a user action that modified the task settings.
The task status bar gives an estimation of the task's progress. The quality of this estimate depends on the quality of the source database’s table statistics; the better the table statistics, the more accurate the estimation. For tasks with only one table that has no estimated rows statistic, we are unable to provide any kind of percentage complete estimate. In this case, the task state and the indication of rows loaded can be used to confirm that the task is indeed running and making progress.
Table State During Tasks
The AWS DMS console updates information regarding the state of your tables during migration. The following table shows the possible state values:
API Version API Version 2016-01-01
149
State
Table does not exist
Before load
Full load
Table completed
Table cancelled
Table error
AWS Database Migration Service User Guide
Monitoring Tasks Using Amazon CloudWatch
Description
AWS DMS cannot find the table on the source endpoint.
The full load process has been enabled, but it hasn't started yet.
The full load process is in progress.
Full load or CDC has completed.
Loading of the table has been cancelled.
An error occurred when loading the table.
Monitoring Tasks Using Amazon CloudWatch
You can use Amazon CloudWatch alarms or events to more closely track your migration. For more information about Amazon CloudWatch, see What Are Amazon CloudWatch, Amazon CloudWatch
Events, and Amazon CloudWatch Logs?
in the Amazon CloudWatch User Guide
The AWS DMS console shows basic CloudWatch statistics for each task, including the task status, percent complete, elapsed time, and table statistics, as shown following. Select the replication task and then select the Task monitoring tab.
API Version API Version 2016-01-01
150
AWS Database Migration Service User Guide
Monitoring Tasks Using Amazon CloudWatch
The AWS DMS console shows performance statistics for each table, including the number of inserts, deletions, and updates, when you select the Table statistics tab.
API Version API Version 2016-01-01
151
AWS Database Migration Service User Guide
Data Migration Service Metrics
In addition, if you select a replication instance from the Replication Instance page, you can view performance metrics for the instance by selecting the Monitoring tab.
Data Migration Service Metrics
AWS DMS provides statistics for the following:
• Host Metrics – Performance and utilization statistics for the replication host, provided by Amazon
CloudWatch. For a complete list of the available metrics, see Replication Instance Metrics (p. 153)
.
• Replication Task Metrics – Statistics for replication tasks including incoming and committed changes, and latency between the replication host and both the source and target databases. For a complete list
of the available metrics, see Replication Task Metrics (p. 154) .
• Table Metrics – Statistics for tables that are in the process of being migrated, including the number of insert, update, delete, and DDL statements completed.
Task metrics are divided into statistics between the replication host and the source endpoint, and statistics between the replication host and the target endpoint. You can determine the total statistic for
API Version API Version 2016-01-01
152
AWS Database Migration Service User Guide
Replication Instance Metrics a task by adding two related statistics together. For example, you can determine the total latency, or replica lag, for a task by combining the CDCLatencySource and CDCLatencyTarget values.
Task metric values can be influenced by current activity on your source database. For example, if a transaction has begun, but has not been committed, then the CDCLatencySource metric will continue to grow until that transaction has been committed.
Replication Instance Metrics
Replication instance monitoring include Amazon CloudWatch metrics for the following statistics:
CPUUtilization
The amount of CPU used.
Units: Bytes
FreeStorageSpace
The amount of available storage space.
Units: Bytes
FreeableMemory
The amount of available random access memory.
Units: Bytes
WriteIOPS
The average number of disk I/O operations per second.
Units: Count/Second
ReadIOPS
The average number of disk I/O operations per second.
Units: Count/Second
WriteThroughput
The average number of bytes written to disk per second.
Units: Bytes/Second
ReadThroughput
The average number of bytes read from disk per second.
Units: Bytes/Second
WriteLatency
The average amount of time taken per disk I/O operation.
Units: Seconds
ReadLatency
The average amount of time taken per disk I/O operation.
Units: Seconds
SwapUsage
The amount of swap space used on the replication instance.
API Version API Version 2016-01-01
153
AWS Database Migration Service User Guide
Replication Task Metrics
Units: Bytes
NetworkTransmitThroughput
The outgoing (Transmit) network traffic on the replication instance, including both customer database traffic and AWS DMS traffic used for monitoring and replication.
Units: Bytes/second
NetworkReceiveThroughput
The incoming (Receive) network traffic on the replication instance, including both customer database traffic and AWS DMS traffic used for monitoring and replication.
Units: Bytes/second
Replication Task Metrics
Replication task monitoring includes metrics for the following statistics:
FullLoadThroughputBandwidthSource
Incoming network bandwidth from a full load from the source in kilobytes (KB) per second.
FullLoadThroughputBandwidthTarget
Outgoing network bandwidth from a full load for the target in KB per second.
FullLoadThroughputRowsSource
Incoming changes from a full load from the source in rows per second.
FullLoadThroughputRowsTarget
Outgoing changes from a full load for the target in rows per second.
CDCIncomingChanges
Total row count of changes for the task.
CDCChangesMemorySource
Amount of rows accumulating in a memory and waiting to be committed from the source.
CDCChangesMemoryTarget
Amount of rows accumulating in a memory and waiting to be committed to the target.
CDCChangesDiskSource
Amount of rows accumulating on disk and waiting to be committed from the source.
CDCChangesDiskTarget
Amount of rows accumulating on disk and waiting to be committed to the target.
CDCThroughputBandwidthTarget
Outgoing task network bandwidth for the target in KB per second.
CDCThroughputRowsSource
Incoming task changes from the source in rows per second.
CDCThroughputRowsTarget
Outgoing task changes for the target in rows per second.
API Version API Version 2016-01-01
154
AWS Database Migration Service User Guide
Logging AWS DMS API Calls Using AWS CloudTrail
CDCLatencySource
Latency reading from source in seconds.
CDCLatencyTarget
Latency writing to the target in seconds.
Logging AWS DMS API Calls Using AWS CloudTrail
The AWS CloudTrail service logs all AWS Database Migration Service (AWS DMS) API calls made by or on behalf of your AWS account. AWS CloudTrail stores this logging information in an S3 bucket. You can use the information collected by CloudTrail to monitor AWS DMS activity, such as creating or deleting a replication instance or an endpoint. For example, you can determine whether a request completed successfully and which user made the request. To learn more about CloudTrail, see the AWS CloudTrail
User Guide .
If an action is taken on behalf of your AWS account using the AWS DMS console or the AWS DMS command line interface, then AWS CloudTrail logs the action as calls made to the AWS DMS
API. For example, if you use the AWS DMS console to describe connections, or call the AWS CLI describe-connections command, then the AWS CloudTrail log shows a call to the AWS DMS API
DescribeConnections action. For a list of the AWS DMS API actions that are logged by AWS CloudTrail, see the AWS DMS API Reference .
Configuring CloudTrail Event Logging
CloudTrail creates audit trails in each region separately and stores them in an S3 bucket. You can configure CloudTrail to use Amazon Simple Notification Service (Amazon SNS) to notify you when a log file is created, but that is optional. CloudTrail will notify you frequently, so we recommend that you use Amazon SNS with an Amazon Simple Queue Service (Amazon SQS) queue and handle notifications programmatically.
You can enable CloudTrail using the AWS Management Console, CLI, or API. When you enable CloudTrail logging, you can have the CloudTrail service create an S3 bucket for you to store your log files. For details, see Creating and Updating Your Trail in the AWS CloudTrail User Guide. The AWS CloudTrail User
Guide also contains information on how to aggregate CloudTrail logs from multiple regions into a single
S3 bucket .
There is no cost to use the CloudTrail service. However, standard rates for S3 usage apply, and also rates for Amazon SNS usage should you include that option. For pricing details, see the S3 and Amazon SNS pricing pages.
AWS Database Migration Service Event Entries in
CloudTrail Log Files
CloudTrail log files contain event information formatted using JSON. An event record represents a single
AWS API call and includes information about the requested action, the user that requested the action, the date and time of the request, and so on.
CloudTrail log files include events for all AWS API calls for your AWS account, not just calls to the AWS
DMS API. However, you can read the log files and scan for calls to the AWS DMS API using the eventName element.
For more information about the different elements and values in CloudTrail log files, see CloudTrail
Event Reference in the AWS CloudTrail User Guide.
API Version API Version 2016-01-01
155
AWS Database Migration Service User Guide
AWS Database Migration Service
Event Entries in CloudTrail Log Files
You might also want to make use of one of the Amazon partner solutions that integrate with CloudTrail to read and analyze your CloudTrail log files. For options, see the AWS partners page.
API Version API Version 2016-01-01
156
AWS Database Migration Service User Guide
Working with Events and
Notifications
AWS Database Migration Service (AWS DMS) uses Amazon Simple Notification Service (Amazon SNS) to provide notifications when an AWS DMS event occurs, for example the creation or deletion of a replication instance. You can work with these notifications in any form supported by Amazon SNS for an
AWS Region, such as an email message, a text message, or a call to an HTTP endpoint.
AWS DMS groups events into categories that you can subscribe to, so you can be notified when an event in that category occurs. For example, if you subscribe to the Creation category for a given replication instance, you are notified whenever a creation-related event occurs that affects your replication instance.
If you subscribe to a Configuration Change category for a replication instance, you are notified when the replication instance's configuration is changed. You also receive notification when an event notification
subscription changes. For a list of the event categories provided by AWS DMS, see AWS DMS Event
Categories and Event Messages (p. 158) , following.
AWS DMS sends event notifications to the addresses you provide when you create an event subscription.
You might want to create several different subscriptions, such as one subscription receiving all event notifications and another subscription that includes only critical events for your production DMS resources. You can easily turn off notification without deleting a subscription by setting the
Enabled
option to No in the AWS DMS console or by setting the
Enabled
parameter to false using the AWS DMS
API.
Note
AWS DMS event notifications using SMS text messages are currently available for AWS DMS resources in all regions where AWS DMS is supported. For more information on using text messages with SNS, see Sending and Receiving SMS Notifications Using Amazon SNS .
AWS DMS uses a subscription identifier to identify each subscription. You can have multiple AWS DMS event subscriptions published to the same Amazon SNS topic. When you use event notification, Amazon
SNS fees apply; for more information on Amazon SNS billing, see Amazon SNS Pricing .
To subscribe to AWS DMS events, you use the following process:
1. Create an Amazon SNS topic. In the topic, you specify what type of notification you want to receive and to what address or number the notification will go to.
2. Create an AWS DMS event notification subscription by using the AWS Management Console, AWS CLI, or AWS DMS API.
3. AWS DMS sends an approval email or SMS message to the addresses you submitted with your subscription. To confirm your subscription, click the link in the approval email or SMS message.
API Version API Version 2016-01-01
157
AWS Database Migration Service User Guide
AWS DMS Event Categories and Event Messages
4. When you have confirmed the subscription, the status of your subscription is updated in the AWS DMS console's Event Subscriptions section.
5. You then begin to receive event notifications.
For the list of categories and events that you can be notified of, see the following section. For more
details about subscribing to and working with AWS DMS event subscriptions, see Subscribing to AWS
DMS Event Notification (p. 160)
.
AWS DMS Event Categories and Event Messages
AWS DMS generates a significant number of events in categories that you can subscribe to using the
AWS DMS console or the AWS DMS API. Each category applies to a source type; currently AWS DMS supports the replication instance and replication task source types.
The following table shows the possible categories and events for the replication instance source type.
Category
Configuration
Change
Configuration
Change
Configuration
Change
Configuration
Change
Configuration
Change
Configuration
Change
Configuration
Change
Configuration
Change
Creation
Creation
Deletion
DMS Event ID
DMS-EVENT-0012
DMS-EVENT-0014
DMS-EVENT-0018
DMS-EVENT-0017
DMS-EVENT-0024
DMS-EVENT-0025
DMS-EVENT-0030
DMS-EVENT-0029
DMS-EVENT-0067
DMS-EVENT-0005
DMS-EVENT-0066
Description
REP_INSTANCE_CLASS_CHANGING – The replication instance class for this replication instance is being changed.
REP_INSTANCE_CLASS_CHANGE_COMPLETE – The replication instance class for this replication instance has changed.
BEGIN_SCALE_STORAGE – The storage for the replication instance is being increased.
FINISH_SCALE_STORAGE – The storage for the replication instance has been increased.
BEGIN_CONVERSION_TO_HIGH_AVAILABILITY – The replication instance is transitioning to a Multi-AZ configuration.
FINISH_CONVERSION_TO_HIGH_AVAILABILITY – The replication instance has finished transitioning to a
Multi-AZ configuration.
BEGIN_CONVERSION_TO_NON_HIGH_AVAILABILITY –
The replication instance is transitioning to a Single-AZ configuration.
FINISH_CONVERSION_TO_NON_HIGH_AVAILABILITY
– The replication instance has finished transitioning to a Single-AZ configuration.
CREATING_REPLICATION_INSTANCE – A replication instance is being created.
CREATED_REPLICATION_INSTANCE – A replication instance has been created.
DELETING_REPLICATION_INSTANCE – The replication instance is being deleted.
API Version API Version 2016-01-01
158
AWS Database Migration Service User Guide
AWS DMS Event Categories and Event Messages
Category
Deletion
Maintenance
Maintenance
Maintenance
LowStorage
Failover
Failover
Failover
Failover
Failure
Failure
DMS Event ID
DMS-EVENT-0003
DMS-EVENT-0047
DMS-EVENT-0026
DMS-EVENT-0027
DMS-EVENT-0007
DMS-EVENT-0013
DMS-EVENT-0049
DMS-EVENT-0050
DMS-EVENT-0051
DMS-EVENT-0031
DMS-EVENT-0036
Description
DELETED_REPLICATION_INSTANCE – The replication instance has been deleted.
FINISH_PATCH_INSTANCE – Management software on the replication instance has been updated.
BEGIN_PATCH_OFFLINE – Offline maintenance of the replication instance is taking place. The replication instance is currently unavailable.
FINISH_PATCH_OFFLINE – Offline maintenance of the replication instance is complete. The replication instance is now available.
LOW_STORAGE – Free storage for the replication instance is low.
FAILOVER_STARTED – Failover started for a Multi-AZ replication instance.
FAILOVER_COMPLETED – Failover has been completed for a Multi-AZ replication instance.
MAZ_INSTANCE_ACTIVATION_STARTED – Multi-AZ activation has started.
MAZ_INSTANCE_ACTIVATION_COMPLETED – Multi-AZ activation completed.
REPLICATION_INSTANCE_FAILURE – The replication instance has gone into storage failure.
INCOMPATIBLE_NETWORK – The replication instance has failed due to an incompatible network.
The following table shows the possible categories and events for the replication task source type.
Category
StateChange
StateChange
Failure
Deletion
Creation
DMS Event ID
DMS-EVENT-0069
DMS-EVENT-0077
DMS-EVENT-0078
DMS-EVENT-0073
DMS-EVENT-0074
Description
REPLICATION_TASK_STARTED – The replication task has started.
REPLICATION_TASK_STOPPED – The replication task has stopped.
REPLICATION_TASK_FAILED – A replication task has failed.
REPLICATION_TASK_DELETED – The replication task has been deleted.
REPLICATION_TASK_CREATED – The replication task has been created.
API Version API Version 2016-01-01
159
AWS Database Migration Service User Guide
Subscribing to AWS DMS Event Notification
Subscribing to AWS DMS Event Notification
You can create an AWS DMS event notification subscription so you can be notified when an AWS DMS event occurs. The simplest way to create a subscription is with the AWS DMS console. If you choose to create event notification subscriptions using AWS DMS API, you must create an Amazon SNS topic and subscribe to that topic with the Amazon SNS console or API. In this case, you also need to note the topic's Amazon Resource Name (ARN), because this ARN is used when submitting CLI commands or API actions. For information on creating an Amazon SNS topic and subscribing to it, see Getting Started with
Amazon SNS .
In a notification subscription, you can specify the type of source you want to be notified of and the
AWS DMS source that triggers the event. You define the AWS DMS source type by using a
SourceType
value. You define the source generating the event by using a SourceIdentifier value. If you specify both SourceType and SourceIdentifier, such as
SourceType = db-instance
and
SourceIdentifier = myDBInstance1
, you receive all the DB_Instance events for the specified source. If you specify
SourceType
but not SourceIdentifier, you receive notice of the events for that source type for all your AWS DMS sources. If you don't specify either SourceType or SourceIdentifier, you are notified of events generated from all AWS DMS sources belonging to your customer account.
AWS Management Console
To subscribe to AWS DMS event notification by using the console
1. Sign in to the AWS Management Console and choose AWS DMS. Note that if you are signed in as an AWS Identity and Access Management (IAM) user, you must have the appropriate permissions to access AWS DMS.
2. In the navigation pane, choose Event Subscriptions.
3. On the Event Subscriptions page, choose Create Event Subscription.
4. On the Create Event Subscription page, do the following: a. For Name, type a name for the event notification subscription.
b. Either choose an existing Amazon SNS topic for Send notifications to, or choose create topic.
You must have either an existing Amazon SNS topic to send notices to or you must create the topic. If you choose create topic, you can enter an email address where notifications will be sent.
c.
For Source Type, choose a source type. The only option is replication instance.
d. Choose Yes to enable the subscription. If you want to create the subscription but not have notifications sent yet, choose No.
e. Depending on the source type you selected, choose the event categories and sources you want to receive event notifications for.
API Version API Version 2016-01-01
160
AWS Database Migration Service User Guide
AWS DMS API f.
Choose Create.
The AWS DMS console indicates that the subscription is being created.
AWS DMS API
To subscribe to AWS DMS event notification by using the AWS DMS API
• Call
CreateEventSubscription
.
API Version API Version 2016-01-01
161
AWS Database Migration Service User Guide
Slow Running Migration Tasks
Troubleshooting Migration Tasks
The following sections provide information on troubleshooting issues with AWS Database Migration
Service (AWS DMS).
Topics
•
Slow Running Migration Tasks (p. 162)
•
Task Status Bar Not Moving (p. 163)
•
Missing Foreign Keys and Secondary Indexes (p. 163)
•
Amazon RDS Connection Issues (p. 163)
•
•
CDC Stuck After Full Load (p. 164)
•
Primary Key Violation Errors When Restarting a Task (p. 164)
•
Initial Load of Schema Fails (p. 165)
•
Tasks Failing With Unknown Error (p. 165)
•
Task Restart Loads Tables From the Beginning (p. 165)
•
Number of Tables Per Task (p. 165)
•
Troubleshooting Oracle Specific Issues (p. 165)
•
Troubleshooting MySQL Specific Issues (p. 168)
•
Troubleshooting PostgreSQL Specific Issues (p. 171)
•
Troubleshooting Microsoft SQL Server Specific Issues (p. 172)
•
Troubleshooting Amazon Redshift Specific Issues (p. 174)
•
Troubleshooting Amazon Aurora Specific Issues (p. 175)
Slow Running Migration Tasks
There are several issues that may cause a migration task to run slowly, or for subsequent tasks to run slower than the initial task. The most common reason for a migration task running slowly is that
API Version API Version 2016-01-01
162
AWS Database Migration Service User Guide
Task Status Bar Not Moving there are inadequate resources allocated to the AWS DMS replication instance. Check your replication instance's use of CPU, Memory, Swap, and IOPs to ensure that your instance has enough resources for the tasks you are running on it. For example, multiple tasks with Amazon Redshift as an endpoint are IO intensive. You can increase IOPS for your replication instance or split your tasks across multiple replication instances for a more efficient migration.
For more information about determining the size of your replication instance, see Determining the
Optimum Size for a Replication Instance (p. 38)
You can increase the speed of an initial migration load by doing the following:
• If your target is an Amazon RDS DB instance, ensure that Multi-AZ is not enabled for the target DB instance.
• Turn off any automatic backups or logging on the target database during the load, and turn back on those features once the migration is complete.
• If the feature is available on the target, use Provisioned IOPs.
Metadata Task Settings (p. 123)
for more information on optimizing for LOBs.
Task Status Bar Not Moving
The task status bar gives an estimation of the task's progress. The quality of this estimate depends on the quality of the source database’s table statistics; the better the table statistics, the more accurate the estimation. For a task with only one table that has no estimated rows statistic, we are unable to provide any kind of percentage complete estimate. In this case, the task state and the indication of rows loaded can be used to confirm that the task is indeed running and making progress.
Missing Foreign Keys and Secondary Indexes
AWS DMS creates tables, primary keys, and in some cases unique indexes, but it doesn't create any other objects that are not required to efficiently migrate the data from the source. For example, it doesn't create secondary indexes, non-primary key constraints, or data defaults.
To migrate secondary objects from your database, use the database's native tools if you are migrating to the same database engine as your source database. Use the Schema Conversion Tool if you are migrating to a different database engine than that used by your source database to migrate secondary objects.
Amazon RDS Connection Issues
There can be several reasons why you are unable to connect to an Amazon RDS DB instance that you set as an endpoint. These include:
• Username and password combination is incorrect.
• Check that the endpoint value shown in the Amazon RDS console for the instance is the same as the endpoint identifier you used to create the AWS DMS endpoint.
• Check that the port value shown in the Amazon RDS console for the instance is the same as the port assigned to the AWS DMS endpoint.
• Check that the security group assigned to the Amazon RDS DB instance allows connections from the
AWS DMS replication instance.
API Version API Version 2016-01-01
163
AWS Database Migration Service User Guide
Error Message: Incorrect thread connection string: incorrect thread value 0
• If the AWS DMS replication instance and the Amazon RDS DB instance are not in the same VPC, check that the DB instance is publicly accessible.
Error Message: Incorrect thread connection string: incorrect thread value 0
This error can often occur when you are testing the connection to an endpoint. The error indicates that there is an error in the connection string, such as a space after the host IP address or a bad character was copied into the connection string.
Networking Issues
The most common networking issue involves the VPC security group used by the AWS DMS replication instance. By default, this security group has rules that allow egress to 0.0.0.0/0 on all ports. If you modify this security group or use your own security group, egress must, at a minimum, be permitted to the source and target endpoints on the respective database ports.
Other configuration related issues include:
• Replication instance and both source and target endpoints in the same VPC — The security group used by the endpoints must allow ingress on the database port from the replication instance. Ensure that the security group used by the replication instance has ingress to the endpoints, or you can create a rule in the security group used by the endpoints that allows the private IP address of the replication instance access.
• Source endpoint is outside the VPC used by the replication instance (using Internet Gateway) —
The VPC security group must include routing rules that send traffic not destined for the VPC to the
Internet Gateway. In this configuration, the connection to the endpoint appears to come from the public IP address on the replication instance.
• Source endpoint is outside the VPC used by the replication instance (using NAT Gateway) — You can configure a network address translation (NAT) gateway using a single Elastic IP Address bound to a single Elastic Network Interface which then receives a NAT identifier (nat-#####). If the VPC includes a default route to that NAT Gateway instead of the Internet Gateway, the replication instance will instead appear to contact the Database Endpoint using the public IP address of the Internet Gateway.
In this case, the ingress to the Database Endpoint outside the VPC needs to allow ingress from the NAT address instead of the Replication Instance’s public IP Address.
CDC Stuck After Full Load
Slow or stuck replication changes can occur after a full load migration when several AWS DMS settings conflict with each other. For example, if the Target table preparation mode parameter is set to Do
nothing or Truncate, then you have instructed AWS DMS to do no setup on the target tables, including creating primary and unique indexes. If you haven't created primary or unique keys on the target tables, then AWS DMS must do a full table scan for each update, which can significantly impact performance.
Primary Key Violation Errors When Restarting a
Task
This error can occur when data remains in the target database from a previous migration task. If the
Target table preparation mode parameter is set to Do nothing, AWS DMS does not do any preparation
API Version API Version 2016-01-01
164
AWS Database Migration Service User Guide
Initial Load of Schema Fails on the target table, including cleaning up data inserted from a previous task. In order to restart your task and avoid these errors, you must remove rows inserted into the target tables from the previous running of the task.
Initial Load of Schema Fails
If your initial load of your schemas fails with an error of
Operation:getSchemaListDetails:errType=, status=0, errMessage=, errDetails=
, then the user account used by AWS DMS to connect to the source endpoint does not have the necessary permissions.
Tasks Failing With Unknown Error
The cause of these types of error can be varied, but often we find that the issue involves insufficient resources allocated to the AWS DMS replication instance. Check the replication instance's use of CPU,
Memory, Swap, and IOPs to ensure your instance has enough resources to perform the migration. For
more information on monitoring, see Data Migration Service Metrics (p. 152) .
Task Restart Loads Tables From the Beginning
AWS DMS restarts table loading from the beginning when it has not finished the initial load of a table.
When a task is restarted, AWS DMS does not reload tables that completed the initial load but will reload tables from the beginning when the initial load did not complete.
Number of Tables Per Task
While there is no set limit on the number of tables per replication task, we have generally found that limiting the number of tables in a task to less than 60,000 is a good rule of thumb. Resource use can often be a bottleneck when a single task uses more than 60,000 tables.
Troubleshooting Oracle Specific Issues
The following issues are specific to using AWS DMS with Oracle databases.
Topics
•
Pulling Data from Views (p. 166)
•
Migrating LOBs from Oracle 12c (p. 166)
•
Switching Between Oracle LogMiner and BinaryReader (p. 166)
•
Error: Oracle CDC stopped 122301 Oracle CDC maximum retry counter exceeded. (p. 166)
•
Automatically Add Supplemental Logging to an Oracle Source Endpoint (p. 167)
•
LOB Changes not being Captured (p. 167)
•
Error: ORA-12899: value too large for column <column-name> (p. 167)
•
NUMBER data type being misinterpreted (p. 167)
API Version API Version 2016-01-01
165
AWS Database Migration Service User Guide
Pulling Data from Views
Pulling Data from Views
To be able to extract data from views, you must add the following code to the
Extra connection
attributes in the Advanced section of the Oracle source endpoint. Note that when you extract data from a view, the view is shown as a table on the target schema.
exposeViews=true
Migrating LOBs from Oracle 12c
AWS DMS can use two methods to capture changes to an Oracle database, BinaryReader and Oracle
LogMiner. By default, AWS DMS uses Oracle LogMiner to capture changes. However, on Oracle 12c,
Oracle LogMiner does not support LOB columns. To capture changes to LOB columns on Oracle 12c, use
BinaryReader.
Switching Between Oracle LogMiner and
BinaryReader
AWS DMS can use two methods to capture changes to a source Oracle database, BinaryReader and
Oracle LogMiner. Oracle LogMiner is the default. To switch to using BinaryReader for capturing changes, do the following:
To use BinaryReader for capturing changes
1. Sign in to the AWS Management Console and select DMS.
2. Select Endpoints.
3. Select the Oracle source endpoint that you want to use BinaryReader.
4. Select Modify.
5. Select Advanced, and then add the following code to the Extra connection attributes text box: useLogminerReader=N
6. Use an Oracle developer tool such as SQL-Plus to grant the following additional privilege to the
AWS DMS user account used to connect to the Oracle endpoint:
SELECT ON V_$TRANSPORTABLE_PLATFORM
Error: Oracle CDC stopped 122301 Oracle CDC maximum retry counter exceeded.
This error occurs when the needed Oracle archive logs have been removed from your server before AWS
DMS was able to use them to capture changes. Increase your log retention policies on your database server. For an Amazon RDS database, run the following procedure to increase log retention. For example, the following code increases log retention on an Amazon RDS DB instance to 24 hours.
API Version API Version 2016-01-01
166
AWS Database Migration Service User Guide
Automatically Add Supplemental
Logging to an Oracle Source Endpoint
Exec rdsadmin.rdsadmin_util.set_configuration(‘archivelog retention hours’,24);
Automatically Add Supplemental Logging to an
Oracle Source Endpoint
By default, AWS DMS has supplemental logging turned off. To automatically turn on supplemental logging for a source Oracle endpoint, do the following:
To add supplemental logging to a source Oracle endpoint
1. Sign in to the AWS Management Console and select DMS.
2. Select Endpoints.
3. Select the Oracle source endpoint that you want to add supplemental logging to.
4. Select Modify.
5. Select Advanced, and then add the following code to the Extra connection attributes text box: addSupplementalLogging=Y
6. Choose
Modify.
LOB Changes not being Captured
Currently, a table must have a primary key for AWS DMS to capture LOB changes. If a table that contains
LOBs doesn't have a primary key, there are several actions you can take to capture LOB changes:
• Add a primary key to the table. This can be as simple as adding an ID column and populating it with a sequence using a trigger.
• Create a materialized view of the table that includes a system generated ID as the primary key and migrate the materialized view rather than the table.
• Create a logical standby, add a primary key to the table, and migrate from the logical standby.
Error: ORA-12899: value too large for column
<column-name>
The error "ORA-12899: value too large for column <column-name>" is often caused by a mismatch in the character sets used by the source and target databases or when NLS settings differ between the two databases. A common cause of this error is when the source database NLS_LENGTH_SEMANTICS parameter is set to CHAR and the target database NLS_LENGTH_SEMANTICS parameter is set to BYTE.
NUMBER data type being misinterpreted
The Oracle NUMBER data type is converted into various AWS DMS datatypes, depending on the precision
and scale of NUMBER. These conversions are documented here Using an Oracle Database as a Source for
AWS Database Migration Service (p. 68) . The way the NUMBER type is converted can also be affected by
using Extra Connection Attributes for the source Oracle endpoint. These Extra Connection Attributes are documented in
Using Extra Connection Attributes with AWS Database Migration Service (p. 197) .
API Version API Version 2016-01-01
167
AWS Database Migration Service User Guide
Troubleshooting MySQL Specific Issues
Troubleshooting MySQL Specific Issues
The following issues are specific to using AWS DMS with MySQL databases.
Topics
•
CDC Task Failing for Amazon RDS DB Instance Endpoint Because Binary Logging Disabled (p. 168)
•
Connections to a target MySQL instance are disconnected during a task (p. 168)
•
Adding Autocommit to a MySQL-compatible Endpoint (p. 169)
•
Disable Foreign Keys on a Target MySQL-compatible Endpoint (p. 169)
•
Characters Replaced with Question Mark (p. 169)
•
"Bad event" Log Entries (p. 169)
•
Change Data Capture with MySQL 5.5 (p. 170)
•
Increasing Binary Log Retention for Amazon RDS DB Instances (p. 170)
•
•
Error: Identifier too long (p. 170)
•
Error: Unsupported Character Set Causes Field Data Conversion to Fail (p. 170)
CDC Task Failing for Amazon RDS DB Instance
Endpoint Because Binary Logging Disabled
This issue occurs with Amazon RDS DB instances because automated backups are disabled. Enable automatic backups by setting the backup retention period to a non-zero value.
Connections to a target MySQL instance are disconnected during a task
If you have a task with LOBs that is getting disconnected from a MySQL target with the following type of errors in the task log, you might need to adjust some of your task settings.
[TARGET_LOAD ]E: RetCode: SQL_ERROR SqlState: 08S01 NativeError:
2013 Message: [MySQL][ODBC 5.3(w) Driver][mysqld-5.7.16-log]Lost connection to MySQL server during query [122502] ODBC general error.
[TARGET_LOAD ]E: RetCode: SQL_ERROR SqlState: HY000 NativeError:
2006 Message: [MySQL][ODBC 5.3(w) Driver]MySQL server has gone away
[122502] ODBC general error.
To solve the issue where a task is being disconnected from a MySQL target, do the following:
• Check that you have your database variable max_allowed_packet
set large enough to hold your largest
LOB.
• Check that you have the following variables set to have a large timeout value. We suggest you use a value of at least 5 minutes for each of these variables.
• net_read_timeout
• net_write_timeout
• wait_timeout
API Version API Version 2016-01-01
168
AWS Database Migration Service User Guide
Adding Autocommit to a MySQL-compatible Endpoint
• interactive_timeout
Adding Autocommit to a MySQL-compatible
Endpoint
To add autocommit to a target MySQL-compatible endpoint
1. Sign in to the AWS Management Console and select DMS.
2. Select Endpoints.
3. Select the MySQL-compatible target endpoint that you want to add autocommit to.
4. Select Modify.
5. Select Advanced, and then add the following code to the Extra connection attributes text box:
Initstmt= SET AUTOCOMMIT=1
6. Choose
Modify.
Disable Foreign Keys on a Target MySQL-compatible
Endpoint
You can disable foreign key checks on MySQL by adding the following to the
Extra Connection
Attributes in the Advanced section of the target MySQL, Aurora, or MariaDB endpoint.
To disable foreign keys on a target MySQL-compatible endpoint
1. Sign in to the AWS Management Console and select DMS.
2. Select Endpoints.
3. Select the Oracle target endpoint that you want to disable foreign keys.
4. Select Modify.
5. Select Advanced, and then add the following code to the Extra connection attributes text box:
Initstmt=SET FOREIGN_KEY_CHECKS=0
6. Choose Modify.
Characters Replaced with Question Mark
The most common situation that causes this issue is when the source endpoint characters have been encoded by a character set that AWS DMS doesn't support. For example, AWS DMS does not support the
UTF8MB4 character set.
"Bad event" Log Entries
"Bad event" entries in the migration logs usually indicate that an unsupported DDL operation was attempted on the source database endpoint. Unsupported DDL operations cause an event that the
API Version API Version 2016-01-01
169
AWS Database Migration Service User Guide
Change Data Capture with MySQL 5.5
replication instance cannot skip so a bad event is logged. To fix this issue, restart the task from the beginning, which will reload the tables and will start capturing changes at a point after the unsupported
DDL operation was issued.
Change Data Capture with MySQL 5.5
AWS DMS change data capture (CDC) for Amazon RDS MySQL-compatible databases requires full image row-based binary logging, which is not supported in MySQL version 5.5 or lower. To use AWS DMS CDC, you must up upgrade your Amazon RDS DB instance to MySQL version 5.6.
Increasing Binary Log Retention for Amazon RDS DB
Instances
AWS DMS requires the retention of binary log files for change data capture. To increase log retention on an Amazon RDS DB instance, use the following procedure. The following example increases the binary log retention to 24 hours.
Call mysql.rds_set_configuration(‘binlog retention hours’, 24);
Log Message: Some changes from the source database had no impact when applied to the target database.
When AWS DMS updates a MySQL database column’s value to its existing value, a message of zero rows affected
is returned from MySQL. This behavior is unlike other database engines such as Oracle and SQL
Server that perform an update of one row, even when the replacing value is the same as the current one.
Error: Identifier too long
The following error occurs when an identifier is too long:
TARGET_LOAD E: RetCode: SQL_ERROR SqlState: HY000 NativeError:
1059 Message: MySQLhttp://ODBC 5.3(w) Driverhttp://mysqld-5.6.10Identifier name ‘<name>’ is too long 122502 ODBC general error. (ar_odbc_stmt.c:4054)
When AWS DMS is set to create the tables and primary keys in the target database, it currently does not use the same names for the Primary Keys that were used in the source database. Instead, AWS
DMS creates the Primary Key name based on the tables name. When the table name is long, the autogenerated identifier created can be longer than the allowed limits for MySQL. The solve this issue, currently, pre-create the tables and Primary Keys in the target database and use a task with the task setting Target table preparation mode set to Do nothing or Truncate to populate the target tables.
Error: Unsupported Character Set Causes Field Data
Conversion to Fail
The following error occurs when an unsupported character set causes a field data conversion to fail:
API Version API Version 2016-01-01
170
AWS Database Migration Service User Guide
Troubleshooting PostgreSQL Specific Issues
“[SOURCE_CAPTURE ]E: Column ‘<column name>' uses an unsupported character set [120112]
A field data conversion failed. (mysql_endpoint_capture.c:2154)
This error often occurs because of tables or databases using UTF8MB4 encoding. AWS DMS does not support the UTF8MB4 character set. In addition, check your database's parameters related to connections. The following command can be used to see these parameters:
SHOW VARIABLES LIKE '%char%';
Troubleshooting PostgreSQL Specific Issues
The following issues are specific to using AWS DMS with PostgreSQL databases.
Topics
•
Columns of a user defined data type not being migrated correctly (p. 171)
•
Error: No schema has been selected to create in (p. 171)
•
Deletes and updates to a table are not being replicated using CDC (p. 171)
•
Truncate statements are not being propagated (p. 172)
•
Preventing PostgreSQL from capturing DDL (p. 172)
•
Selecting the schema where database objects for capturing DDL are created (p. 172)
•
Oracle tables missing after migrating to PostgreSQL (p. 172)
•
Task Using View as a Source Has No Rows Copied (p. 172)
Columns of a user defined data type not being migrated correctly
When replicating from a PostgreSQL source, AWS DMS creates the target table with the same data types for all columns, apart from columns with user-defined data types. In such cases, the data type is created as “character varying” in the target.
Error: No schema has been selected to create in
The error "SQL_ERROR SqlState: 3F000 NativeError: 7 Message: ERROR: no schema has been selected to create in" can occur when your JSON table mapping contains a wild card value for the schema but the source database doesn't support that value.
Deletes and updates to a table are not being replicated using CDC
Delete and Update operations during change data capture (CDC) are ignored if the source table does not have a primary key. AWS DMS supports change data capture (CDC) for PostgreSQL tables with primary keys; if a table does not have a primary key, the WAL logs do not include a before image of the database row and AWS DMS cannot update the table. Create a primary key on the source table if you want delete operations to be replicated.
API Version API Version 2016-01-01
171
AWS Database Migration Service User Guide
Truncate statements are not being propagated
Truncate statements are not being propagated
When using change data capture (CDC), TRUNCATE operations are not supported by AWS DMS.
Preventing PostgreSQL from capturing DDL
You can prevent a PostgreSQL target endpoint from capturing DDL statements by adding the following
Extra Connection Attribute statement. The Extra Connection Attribute parameter is available in the
Advanced tab of the source endpoint.
captureDDLs=N
Selecting the schema where database objects for capturing DDL are created
You can control what schema the database objects related to capturing DDL are created in. Add the following Extra Connection Attribute statement. The Extra Connection Attribute parameter is available in the Advanced tab of the target endpoint.
ddlArtifactsSchema=xyzddlschema
Oracle tables missing after migrating to PostgreSQL
Oracle defaults to uppercase table names while PostgreSQL defaults to lowercase table names. When performing a migration from Oracle to PostgreSQL you will most likely need to supply transformation rules under the table mapping section of your task to convert the case of your table names.
Your tables and data are still accessible; if you migrated your tables without using transformation rules to convert the case of your table names, you will need to enclose your table names in quotes when referencing them.
Task Using View as a Source Has No Rows Copied
A View as a PostgreSQL source endpoint is not supported by AWS DMS.
Troubleshooting Microsoft SQL Server Specific
Issues
The following issues are specific to using AWS DMS with Microsoft SQL Server databases.
Topics
•
Special Permissions for AWS DMS user account to use CDC (p. 173)
•
SQL Server Change Data Capture (CDC) and Amazon RDS (p. 173)
•
Errors Capturing Changes for SQL Server Database (p. 173)
•
Missing Identity Columns (p. 173)
API Version API Version 2016-01-01
172
AWS Database Migration Service User Guide
Special Permissions for AWS DMS user account to use CDC
•
Error: SQL Server Does Not Support Publications (p. 173)
•
Changes Not Appearing in Target (p. 173)
Special Permissions for AWS DMS user account to use
CDC
The user account used with AWS DMS requires the SQL Server SysAdmin role in order to operate correctly when using change data capture (CDC). CDC for SQL Server is only available for on-premises databases or databases on an EC2 instance.
SQL Server Change Data Capture (CDC) and Amazon
RDS
AWS DMS currently does not support change data capture (CDC) from an Amazon RDS SQL Server DB instance. CDC for SQL Server is only available for on-premises databases or databases on an Amazon EC2 instance.
Errors Capturing Changes for SQL Server Database
Errors during change data capture (CDC) can often indicate that one of the pre-requisites was not met.
For example, the most common overlooked pre-requisite is a full database backup. The task log indicates this omission with the following error:
SOURCE_CAPTURE E: No FULL database backup found (under the 'FULL' recovery model).
To enable all changes to be captured, you must perform a full database backup.
120438 Changes may be missed. (sqlserver_log_queries.c:2623)
Review the pre-requisites listed for using SQL Server as a source in Using a Microsoft SQL Server
Database as a Source for AWS Database Migration Service (p. 76) .
Missing Identity Columns
AWS DMS does not support identity columns when you create a target schema. You must add them after the initial load has completed.
Error: SQL Server Does Not Support Publications
The following error is generated when you use SQL Server Express as a source endpoint:
RetCode: SQL_ERROR SqlState: HY000 NativeError: 21106
Message: This edition of SQL Server does not support publications.
AWS DMS currently does not support SQL Server Express as a source or target.
Changes Not Appearing in Target
AWS DMS requires that a source SQL Server database be in either ‘FULL’ or ‘BULK LOGGED’ data recovery model in order to consistently capture changes. The ‘SIMPLE’ model is not supported.
API Version API Version 2016-01-01
173
AWS Database Migration Service User Guide
Troubleshooting Amazon Redshift Specific Issues
The SIMPLE recovery model logs the minimal information needed to allow users to recover their database. All inactive log entries are automatically truncated when a checkpoint occurs. All operations are still logged, but as soon as a checkpoint occurs the log is automatically truncated, which means that it becomes available for re-use and older log entries can be over-written. When log entries are overwritten, changes cannot be captured, and that is why AWS DMS doesn't support the SIMPLE data recovery model. For information on other required pre-requisites for using SQL Server as a source, see
Using a Microsoft SQL Server Database as a Source for AWS Database Migration Service (p. 76)
.
Troubleshooting Amazon Redshift Specific Issues
The following issues are specific to using AWS DMS with Amazon Redshift databases.
Topics
•
Loading into a Amazon Redshift Cluster in a Different Region Than the AWS DMS Replication
•
Error: Relation "awsdms_apply_exceptions" already exists (p. 174)
•
Errors with Tables Whose Name Begins with "awsdms_changes" (p. 174)
•
Seeing Tables in Cluster with Names Like dms.awsdms_changes000000000XXXX (p. 174)
•
Permissions Required to Work with Amazon Redshift (p. 175)
Loading into a Amazon Redshift Cluster in a Different
Region Than the AWS DMS Replication Instance
This can't be done. AWS DMS requires that the AWS DMS replication instance and a Redshift cluster be in the same region.
Error: Relation "awsdms_apply_exceptions" already exists
The error "Relation "awsdms_apply_exceptions" already exists" often occurs when a Redshift endpoint is specified as a PostgreSQL endpoint. To fix this issue, modify the endpoint and change the
Target engine
to "redshift."
Errors with Tables Whose Name Begins with
"awsdms_changes"
Error messages that relate to tables with names that begin with "awsdms_changes" often occur when two tasks that are attempting to load data into the same Amazon Redshift cluster are running concurrently. Due to the way temporary tables are named, concurrent tasks can conflict when updating the same table.
Seeing Tables in Cluster with Names Like dms.awsdms_changes000000000XXXX
AWS DMS creates temporary tables when data is being loaded from files stored in S3. The name of these temporary tables have the prefix "dms.awsdms_changes." These tables are required so AWS DMS can store data when it is first loaded and before it is placed in its final target table.
API Version API Version 2016-01-01
174
AWS Database Migration Service User Guide
Permissions Required to Work with Amazon Redshift
Permissions Required to Work with Amazon Redshift
To use AWS DMS with Amazon Redshift, the user account you use to access Amazon Redshift must have the following permissions:
• CRUD (Select, Insert, Update, Delete)
• Bulk Load
• Create, Alter, Drop (if required by the task's definition)
To see all the pre-requisites required for using Amazon Redshift as a target, see
Redshift Database as a Target for AWS Database Migration Service (p. 100)
.
Troubleshooting Amazon Aurora Specific Issues
The following issues are specific to using AWS DMS with Amazon Aurora databases.
Topics
•
Error: CHARACTER SET UTF8 fields terminated by ',' enclosed by '"' lines terminated by '\n' (p. 175)
Error: CHARACTER SET UTF8 fields terminated by ',' enclosed by '"' lines terminated by '\n'
If you are using Amazon Aurora as a target and see an error like the following in the logs, this usually indicates that you have ANSI_QUOTES as part of the SQL_MODE parameter. Having ANSI_QUOTES as part of the SQL_MODE parameter causes double quotes to be handled like quotes and can create issues when you run a task. To fix this error, remove ANSI_QUOTES from the SQL_MODE parameter.
2016-11-02T14:23:48 [TARGET_LOAD ]E: Load data sql statement. load data local infile
"/rdsdbdata/data/tasks/7XO4FJHCVON7TYTLQ6RX3CQHDU/data_files/4/LOAD000001DF.csv" into
table
`VOSPUSER`.`SANDBOX_SRC_FILE` CHARACTER SET UTF8 fields terminated by ',' enclosed by '"' lines terminated by '\n'( `SANDBOX_SRC_FILE_ID`,`SANDBOX_ID`,
`FILENAME`,`LOCAL_PATH`,`LINES_OF_CODE`,`INSERT_TS`,`MODIFIED_TS`,`MODIFIED_BY`,
`RECORD_VER`,`REF_GUID`,`PLATFORM_GENERATED`,`ANALYSIS_TYPE`,`SANITIZED`,`DYN_TYPE`,
`CRAWL_STATUS`,`ORIG_EXEC_UNIT_VER_ID` ) ; (provider_syntax_manager.c:2561)
API Version API Version 2016-01-01
175
AWS Database Migration Service User Guide
Reference for AWS Database
Migration Service Including Data
Conversion Reference and Additional
Topics
This reference section includes additional information you may need when using AWS Database
Migration Service (AWS DMS), including data type conversion information and additional procedures.
There are several ways to begin a database migration. You can select the AWS DMS console wizard that walks you through each step of the process, or you can do each step by selecting the appropriate task from the navigation pane. You can also use the AWS CLI; for information on using the AWS CLI with AWS
DMS, see DMS .
There are a few important things to remember about data types when migrating a database:
• The FLOAT data type is inherently an approximation. The FLOAT data type is special in the sense that when you insert a specific value, it may be represented differently in the database, as it is not an accurate data type, such as a decimal data type like NUMBER or NUMBER(p,s). As a result, the internal value of FLOAT stored in the database might be different than the value that you insert, so the migrated value of a FLOAT might not match exactly the value on the source database.
Here are some articles on the topic:
IEEE floating point https://en.wikipedia.org/wiki/IEEE_floating_point
IEEE Floating-Point Representation https://msdn.microsoft.com/en-us/library/0b34tf65.aspx
Why Floating-Point Numbers May Lose Precision https://msdn.microsoft.com/en-us/library/ c151dt3s.aspx
• The UTF-8 4-byte character set (utf8mb4) is not supported and could cause unexpected behavior in a source database. Plan to convert any data using the UTF-8 4-byte character set before migrating.
Topics
•
•
API Version API Version 2016-01-01
176
AWS Database Migration Service User Guide
Source Data Types
•
Data Types for AWS Database Migration Service (p. 196)
•
Using Extra Connection Attributes with AWS Database Migration Service (p. 197)
•
Using ClassicLink with AWS Database Migration Service (p. 204)
Source Data Types
You can find data type conversion tables for databases used as a source for AWS Database Migration
Service following.
Topics
•
Source Data Types for Oracle (p. 177)
•
Source Data Types for Microsoft SQL Server (p. 179)
•
Source Data Types for PostgreSQL (p. 182)
•
Source Data Types for MySQL (p. 184)
•
Source Data Types for SAP ASE (p. 185)
•
Source Data Types for MongoDB (p. 187)
Source Data Types for Oracle
The Oracle endpoint for AWS DMS supports most Oracle data types. The following table shows the
Oracle source data types that are supported when using AWS DMS and the default mapping to AWS DMS data types.
For additional information about AWS DMS data types, see
Data Types for AWS Database Migration
.
Oracle Data Type
BINARY_FLOAT
BINARY_DOUBLE
BINARY
FLOAT (P)
AWS DMS Data Type
REAL4
REAL8
BYTES
If precision is less than or equal to 24, use REAL4.
NUMBER (P,S)
NUMBER according to the "Expose number as" property in the Oracle source database settings.
If precision is greater than 24, use REAL8.
When scale is less than 0, use REAL8
When scale is 0:
• And precision is 0, use REAL8.
• And precision is greater than or equal to 2, use INT1.
• And precision is greater than 2 and less than or equal to 4, use INT2.
• And precision is greater than 4 and less than or equal to 9, use INT4.
• And precision is greater than 9, use NUMERIC.
• And precision is greater than or equal to scale, use NUMERIC.
DATE
In all other cases, use REAL8.
DATETIME
API Version API Version 2016-01-01
177
AWS Database Migration Service User Guide
Source Data Types for Oracle
Oracle Data Type AWS DMS Data Type
INTERVAL_YEAR TO MONTH STRING (with interval year_to_month indication)
INTERVAL_DAY TO SECOND STRING (with interval day_to_second indication)
TIME DATETIME
DATETIME
STRING (with timestamp_with_timezone indication)
TIMESTAMP
TIMESTAMP WITH TIME
ZONE
TIMESTAMP WITH LOCAL
TIME ZONE
CHAR
VARCHAR2
NCHAR
STRING (with timestamp_with_local_ timezone indication)
STRING
STRING
WSTRING
NVARCHAR2
RAW
REAL
BLOB
CLOB
WSTRING
BYTES
REAL8
BLOB
To use this data type with AWS DMS, you must enable the use of BLOB data types for a specific task. AWS DMS supports BLOB data types only in tables that include a primary key.
CLOB
NCLOB
LONG
LONG RAW
To use this data type with AWS DMS, you must enable the use of CLOB data types for a specific task. During change data capture (CDC), AWS
DMS supports CLOB data types only in tables that include a primary key.
NCLOB
To use this data type with AWS DMS, you must enable the use of
NCLOB data types for a specific task. During CDC, AWS DMS supports
NCLOB data types only in tables that include a primary key.
CLOB
The LONG data type is not supported in batch-optimized apply mode
(TurboStream CDC mode). To use this data type with AWS DMS, you must enable the use of LOBs for a specific task. During CDC, AWS DMS supports LOB data types only in tables that have a primary key.
BLOB
The LONG RAW data type is not supported in batch-optimized apply mode (TurboStream CDC mode). To use this data type with AWS DMS, you must enable the use of LOBs for a specific task. During CDC, AWS
DMS supports LOB data types only in tables that have a primary key.
API Version API Version 2016-01-01
178
AWS Database Migration Service User Guide
Source Data Types for SQL Server
Oracle Data Type
XMLTYPE
AWS DMS Data Type
CLOB
Support for the XMLTYPE data type requires the full Oracle Client
(as opposed to the Oracle Instant Client). When the target column is a CLOB, both full LOB mode and limited LOB mode are supported
(depending on the target).
Oracle tables used as a source with columns of the following data types are not supported and cannot be replicated. Replicating columns with these data types result in a null column.
• BFILE
• ROWID
• REF
• UROWID
• Nested Table
• User-defined data types
• ANYDATA
Note
Virtual columns are not supported.
Source Data Types for Microsoft SQL Server
Data migration that uses Microsoft SQL Server as a source for AWS DMS supports most SQL Server data types. The following table shows the SQL Server source data types that are supported when using AWS
DMS and the default mapping from AWS DMS data types.
For information on how to view the data type that is mapped in the target, see the section for the target endpoint you are using.
For additional information about AWS DMS data types, see
Data Types for AWS Database Migration
.
SQL Server Data Types
BIGINT
BIT
DECIMAL
INT
MONEY
NUMERIC (p,s)
SMALLINT
SMALLMONEY
TINYINT
REAL
AWS DMS Data Types
INT8
BOOLEAN
NUMERIC
INT4
NUMERIC
NUMERIC
INT2
NUMERIC
UINT1
REAL4
API Version API Version 2016-01-01
179
AWS Database Migration Service User Guide
Source Data Types for SQL Server
SQL Server Data Types
FLOAT
DATETIME
DATETIME2 (SQL Server 2008 and later)
SMALLDATETIME
DATE
TIME
DATETIMEOFFSET
CHAR
VARCHAR
VARCHAR (max)
NCHAR
NVARCHAR (length)
NVARCHAR (max)
BINARY
VARBINARY
AWS DMS Data Types
REAL8
DATETIME
DATETIME
DATETIME
DATE
TIME
WSTRING
STRING
STRING
CLOB
TEXT
To use this data type with AWS DMS, you must enable the use of CLOB data types for a specific task.
For SQL Server tables, AWS DMS updates
LOB columns in the target even for UPDATE statements that don't change the value of the
LOB column in SQL Server.
During CDC, AWS DMS supports CLOB data types only in tables that include a primary key.
WSTRING
WSTRING
NCLOB
NTEXT
To use this data type with AWS DMS, you must enable the use of NCLOB data types for a specific task.
For SQL Server tables, AWS DMS updates
LOB columns in the target even for UPDATE statements that don't change the value of the
LOB column in SQL Server.
During CDC, AWS DMS supports CLOB data types only in tables that include a primary key.
BYTES
BYTES
API Version API Version 2016-01-01
180
AWS Database Migration Service User Guide
Source Data Types for SQL Server
SQL Server Data Types
VARBINARY (max)
TIMESTAMP
UNIQUEIDENTIFIER
HIERARCHYID
XML
GEOMETRY
GEOGRAPHY
AWS DMS Data Types
BLOB
IMAGE
For SQL Server tables, AWS DMS updates
LOB columns in the target even for UPDATE statements that don't change the value of the
LOB column in SQL Server.
To use this data type with AWS DMS, you must enable the use of BLOB data types for a specific task.
AWS DMS supports BLOB data types only in tables that include a primary key.
BYTES
STRING
Use HIERARCHYID when replicating to a SQL
Server target endpoint.
Use WSTRING (250) when replicating to all other target endpoints.
NCLOB
For SQL Server tables, AWS DMS updates
LOB columns in the target even for UPDATE statements that don't change the value of the
LOB column in SQL Server.
To use this data type with AWS DMS, you must enable the use of NCLOB data types for a specific task.
During CDC, AWS DMS supports NCLOB data types only in tables that include a primary key.
Use GEOMETRY when replicating to target endpoints that support this data type.
Use CLOB when replicating to target endpoints that don't support this data type.
Use GEOGRAPHY when replicating to target endpoints that support this data type.
Use CLOB when replicating to target endpoints that do not support this data type.
AWS DMS does not support tables that include fields with the following data types:
• CURSOR
• SQL_VARIANT
API Version API Version 2016-01-01
181
AWS Database Migration Service User Guide
Source Data Types for PostgreSQL
• TABLE
Note
User-defined data types are supported according to their base type. For example, a user-defined data type based on DATETIME is handled as a DATETIME data type.
Source Data Types for PostgreSQL
The following table shows the PostgreSQL source data types that are supported when using AWS DMS and the default mapping to AWS DMS data types.
For additional information about AWS DMS data types, see
Data Types for AWS Database Migration
.
PostgreSQL Data Types
INTEGER
SMALLINT
BIGINT
NUMERIC (p,s)
DECIMAL(P,S)
REAL
DOUBLE
SMALLSERIAL
SERIAL
BIGSERIAL
MONEY
CHAR
CHAR(N)
VARCHAR(N)
TEXT
BYTEA
TIMESTAMP
TIMESTAMP (z)
AWS DMS Data Types
INT4
INT2
INT8
If precision is from 0 through 38, then use
NUMERIC.
If precision is 39 or greater, then use STRING.
If precision is from 0 through 38, then use
NUMERIC.
If precision is 39 or greater, then use STRING.
REAL4
REAL8
INT2
INT4
INT8
NUMERIC(38,4)
Note: The MONEY data type is mapped to FLOAT in SQL Server.
WSTRING (1)
WSTRING (n)
WSTRING (n)
NCLOB
BLOB
TIMESTAMP
TIMESTAMP
API Version API Version 2016-01-01
182
PostgreSQL Data Types
TIMESTAMP with time zone
DATE
TIME
TIME (z)
INTERVAL
LINE
LSEG
BOX
PATH
POLYGON
CIRCLE
JSON
ARRAY
COMPOSITE
INT4RANGE
INT8RANGE
NUMRANGE
STRRANGE
BOOLEAN
ENUM
CIDR
INET
MACADDR
BIT (n)
BIT VARYING (n)
UUID
TSVECTOR
TSQUERY
XML
POINT
AWS Database Migration Service User Guide
Source Data Types for PostgreSQL
AWS DMS Data Types
Not supported
DATE
TIME
TIME
STRING (128)—1 YEAR, 2 MONTHS, 3 DAYS, 4
HOURS, 5 MINUTES, 6 SECONDS
CHAR (5) false or true
STRING (64)
STRING (50)
STRING (50)
STRING (18)
STRING (n)
STRING (n)
STRING
CLOB
CLOB
CLOB
STRING (255) "(x,y)"
STRING (255) "(x,y,z)"
STRING (255) "((x1,y1),(x2,y2))"
STRING (255) "((x1,y1),(x2,y2))"
CLOB "((x1,y1),(xn,yn))"
CLOB "((x1,y1),(xn,yn))"
STRING (255) "(x,y),r"
NCLOB
NCLOB
NCLOB
STRING (255)
STRING (255)
STRING (255)
STRING (255)
API Version API Version 2016-01-01
183
AWS Database Migration Service User Guide
Source Data Types for MySQL
Source Data Types for MySQL
The following table shows the MySQL database source data types that are supported when using AWS
DMS and the default mapping from AWS DMS data types.
Note
The UTF-8 4-byte character set (utf8mb4) is not supported and could cause unexpected behavior in a source database. Plan to convert any data using the UTF-8 4-byte character set before migrating.
For additional information about AWS DMS data types, see
Data Types for AWS Database Migration
.
MySQL Data Types
INT
MEDIUMINT
BIGINT
TINYINT
DECIMAL(10)
BINARY
BIT
BIT(64)
BLOB
LONGBLOB
MEDIUMBLOB
TINYBLOB
DATE
DATETIME
TIME
TIMESTAMP
YEAR
DOUBLE
FLOAT
VARCHAR (45)
AWS DMS Data Types
INT4
INT4
INT8
INT1
NUMERIC (10,0)
BYTES(1)
BOOLEAN
BYTES(8)
BYTES(66535)
BLOB
BLOB
BYTES(255)
DATE
DATETIME
STRING
DATETIME
INT2
REAL8
REAL(DOUBLE)
The supported FLOAT range is -1.79E+308 to
-2.23E-308, 0 and 2.23E-308 to 1.79E+308
If the FLOAT values are not in the range specified here, map the FLOAT data type to the STRING data type.
WSTRING (45)
API Version API Version 2016-01-01
184
AWS Database Migration Service User Guide
Source Data Types for SAP ASE
MySQL Data Types
VARCHAR (2000)
VARCHAR (4000)
VARBINARY (4000)
VARBINARY (2000)
CHAR
TEXT
LONGTEXT
MEDIUMTEXT
TINYTEXT
GEOMETRY
POINT
LINESTRING
POLYGON
MULTIPOINT
MULTILINESTRING
MULTIPOLYGON
GEOMETRYCOLLECTION
BLOB
BLOB
BLOB
BLOB
BLOB
BLOB
BLOB
BLOB
AWS DMS Data Types
WSTRING (2000)
WSTRING (4000)
BYTES (4000)
BYTES (2000)
WSTRING
WSTRING (65535)
NCLOB
NCLOB
WSTRING (255)
Note
If the DATETIME and TIMESTAMP data types are specified with a “zero” value (that is,
0000-00-00), you need to make sure that the target database in the replication task supports
"zero" values for the DATETIME and TIMESTAMP data types. Otherwise, they are recorded as null on the target.
The following MySQL data types are supported in full load only:
MySQL Data Types
ENUM
SET
AWS DMS Data Types
STRING
STRING
Source Data Types for SAP ASE
Data migration that uses SAP ASE as a source for AWS DMS supports most SAP ASE data types. The following table shows the SAP ASE source data types that are supported when using AWS DMS and the default mapping from AWS DMS data types.
For information on how to view the data type that is mapped in the target, see the section for the target endpoint you are using.
API Version API Version 2016-01-01
185
AWS Database Migration Service User Guide
Source Data Types for SAP ASE
For additional information about AWS DMS data types, see
Data Types for AWS Database Migration
.
SAP ASE Data Types
BIGINT
BINARY
BIT
CHAR
DATE
DATETIME
DECIMAL
DOUBLE
FLOAT
IMAGE
INT
MONEY
NCHAR
NUMERIC
NVARCHAR
REAL
SMALLDATETIME
SMALLINT
SMALLMONEY
TEXT
TIME
TINYINT
UNICHAR
UNITEXT
UNIVARCHAR
VARBINARY
VARCHAR
AWS DMS Data Types
INT8
BYTES
BOOLEAN
STRING
DATE
DATETIME
NUMERIC
REAL8
REAL8
BLOB
INT4
NUMERIC
WSTRING
NUMERIC
WSTRING
REAL4
DATETIME
INT2
NUMERIC
CLOB
TIME
UINT1
UNICODE CHARACTER
NCLOB
UNICODE
BYTES
STRING
AWS DMS does not support tables that include fields with the following data types:
• User-defined type (UDT)
API Version API Version 2016-01-01
186
AWS Database Migration Service User Guide
Source Data Types for MongoDB
Source Data Types for MongoDB
Data migration that uses MongoDB as a source for AWS DMS supports most MongoDB data types. The following table shows the MongoDB source data types that are supported when using AWS DMS and the default mapping from AWS DMS data types. For more information about MongoDB data types, see https://docs.mongodb.com/manual/reference/bson-types .
For information on how to view the data type that is mapped in the target, see the section for the target endpoint you are using.
For additional information about AWS DMS data types, see
Data Types for AWS Database Migration
.
MongoDB Data Types
Boolean
Binary
Date
Timestamp
Int
Long
Double
String (UTF-8)
Array
OID
REGEX
CODE
INT8
REAL8
CLOB
CLOB
String
CLOB
CLOB
AWS DMS Data Types
Bool
BLOB
Date
Date
INT4
Target Data Types
You can find data type conversion tables for databases used as a target for AWS Database Migration
Service following.
Topics
•
Target Data Types for Oracle (p. 188)
•
Target Data Types for Microsoft SQL Server (p. 189)
•
Target Data Types for PostgreSQL (p. 190)
•
Target Data Types for MySQL (p. 192)
•
Target Data Types for SAP ASE (p. 193)
•
Target Data Types for Amazon Redshift (p. 194)
•
Target Data Types for Amazon DynamoDB (p. 196)
API Version API Version 2016-01-01
187
AWS Database Migration Service User Guide
Target Data Types for Oracle
Target Data Types for Oracle
A target Oracle database used with AWS DMS supports most Oracle data types. The following table shows the Oracle target data types that are supported when using AWS DMS and the default mapping from AWS DMS data types. For more information about how to view the data type that is mapped from the source, see the section for the source you are using.
AWS DMS Data Type
BOOLEAN
BYTES
DATE
TIME
DATETIME
INT1
INT2
INT4
INT8
NUMERIC
REAL4
REAL8
STRING
UINT1
UINT2
UINT4
UINT8
WSTRING
BLOB
Oracle Data Type
NUMBER (1)
RAW (length)
DATETIME
TIMESTAMP (0)
TIMESTAMP (scale)
NUMBER (3)
NUMBER (5)
NUMBER (10)
NUMBER (19)
NUMBER (p,s)
FLOAT
FLOAT
With date indication: DATE
With time indication: TIMESTAMP
With timestamp indication: TIMESTAMP
With timestamp_with_timezone indication: TIMESTAMP WITH
TIMEZONE
With timestamp_with_local_timezone indication: TIMESTAMP WITH
LOCAL TIMEZONE With interval_year_to_month indication: INTERVAL
YEAR TO MONTH
With interval_day_to_second indication: INTERVAL DAY TO SECOND
In all other cases: VARCHAR2 (Length)
NUMBER (3)
NUMBER (5)
NUMBER (10)
NUMBER (19)
NVARCHAR2 (length)
BLOB
API Version API Version 2016-01-01
188
AWS Database Migration Service User Guide
Target Data Types for SQL Server
AWS DMS Data Type
CLOB
NCLOB
XMLTYPE
Oracle Data Type
To use this data type with AWS DMS, you must enable the use of BLOBs for a specific task. BLOB data types are supported only in tables that include a primary key
CLOB
To use this data type with AWS DMS, you must enable the use of CLOBs for a specific task. During CDC, CLOB data types are supported only in tables that include a primary key.
NCLOB
To use this data type with AWS DMS, you must enable the use of NCLOBs for a specific task. During CDC, NCLOB data types are supported only in tables that include a primary key.
The XMLTYPE target data type is only relevant in Oracle-to-Oracle replication tasks.
When the source database is Oracle, the source data types are replicated "as is" to the Oracle target. For example, an XMLTYPE data type on the source is created as an XMLTYPE data type on the target.
Target Data Types for Microsoft SQL Server
The following table shows the Microsoft SQL Server target data types that are supported when using
AWS DMS and the default mapping from AWS DMS data types. For additional information about AWS
DMS data types, see Data Types for AWS Database Migration Service (p. 196)
.
INT1
INT2
INT4
INT8
AWS DMS Data Type
BOOLEAN
BYTES
DATE
TIME
DATETIME
SQL Server Data Type
TINYINT
VARBINARY(length)
For SQL Server 2008 and later, use DATE.
For earlier versions, if the scale is 3 or less use DATETIME. In all other cases, use VARCHAR (37).
For SQL Server 2008 and later, use DATETIME2 (%d).
For earlier versions, if the scale is 3 or less use DATETIME. In all other cases, use VARCHAR (37).
For SQL Server 2008 and later, use DATETIME2 (scale).
For earlier versions, if the scale is 3 or less use DATETIME. In all other cases, use VARCHAR (37).
SMALLINT
SMALLINT
INT
BIGINT
API Version API Version 2016-01-01
189
AWS Database Migration Service User Guide
Target Data Types for PostgreSQL
AWS DMS Data Type
NUMERIC
REAL4
REAL8
STRING
UINT1
UINT2
UINT4
UINT8
WSTRING
BLOB
CLOB
NCLOB
SQL Server Data Type
NUMBER (p,s)
REAL
FLOAT
If the column is a date or time column, then do the following:
• For SQL Server 2008 and later, use DATETIME2.
• For earlier versions, if the scale is 3 or less use DATETIME. In all other cases, use VARCHAR (37).
If the column is not a date or time column, use VARCHAR (length).
TINYINT
SMALLINT
INT
BIGINT
NVARCHAR (length)
VARBINARY(max)
IMAGE
To use this data type with AWS DMS, you must enable the use of BLOBs for a specific task. AWS DMS supports BLOB data types only in tables that include a primary key.
VARCHAR(max)
To use this data type with AWS DMS, you must enable the use of CLOBs for a specific task. During CDC, AWS DMS supports CLOB data types only in tables that include a primary key.
NVARCHAR(max)
To use this data type with AWS DMS, you must enable the use of
NCLOBs for a specific task. During CDC, AWS DMS supports NCLOB data types only in tables that include a primary key.
Target Data Types for PostgreSQL
The PostgreSQL database endpoint for AWS DMS supports most PostgreSQL database data types. The following table shows the PostgreSQL database target data types that are supported when using AWS
DMS and the default mapping from AWS DMS data types. Unsupported data types are listed following the table.
For additional information about AWS DMS data types, see
Data Types for AWS Database Migration
.
API Version API Version 2016-01-01
190
AWS Database Migration Service User Guide
Target Data Types for PostgreSQL
AWS DMS Data Type
BOOL
BYTES
DATE
TIME
TIMESTAMP
INT1
INT2
INT4
INT8
NUMERIC
REAL4
REAL8
STRING
UINT1
UINT2
UINT4
UINT8
WSTRING
BCLOB
NCLOB
CLOB
PostgreSQL Data Type
BOOL
BYTEA
DATE
TIME
If the scale is from 0 through 6, then use TIMESTAMP.
If the scale is from 7 through 9, then use VARCHAR (37).
SMALLINT
SMALLINT
INTEGER
BIGINT
DECIMAL (P,S)
FLOAT4
FLOAT8
If the length is from 1 through 21,845, then use VARCHAR (length in bytes).
If the length is 21,846 through 2,147,483,647, then use VARCHAR
(65535).
SMALLINT
INTEGER
BIGINT
BIGINT
If the length is from 1 through 21,845, then use VARCHAR (length in bytes).
If the length is 21,846 through 2,147,483,647, then use VARCHAR
(65535).
BYTEA
TEXT
TEXT
Note
When replicating from a PostgreSQL source, AWS DMS creates the target table with the same data types for all columns, apart from columns with user-defined data types. In such cases, the data type is created as "character varying" in the target.
API Version API Version 2016-01-01
191
AWS Database Migration Service User Guide
Target Data Types for MySQL
INT1
INT2
INT4
INT8
NUMERIC
REAL4
REAL8
STRING
Target Data Types for MySQL
The following table shows the MySQL database target data types that are supported when using AWS
DMS and the default mapping from AWS DMS data types.
For additional information about AWS DMS data types, see
Data Types for AWS Database Migration
.
AWS DMS Data Types
BOOLEAN
BYTES
DATE
TIME
TIMESTAMP
UINT1
UINT2
UINT4
UINT8
WSTRING
BLOB
MySQL Data Types
BOOLEAN
If the length is from 1 through 65,535, then use
VARBINARY (length).
If the length is from 65,536 through
2,147,483,647, then use LONGLOB.
DATE
TIME
"If scale is => 0 and =< 6, then: DATETIME (Scale)
If scale is => 7 and =< 9, then: VARCHAR (37)"
TINYINT
SMALLINT
INTEGER
BIGINT
DECIMAL (p,s)
FLOAT
DOUBLE PRECISION
If the length is from 1 through 21,845, then use
VARCHAR (length).
If the length is from 21,846 through
2,147,483,647, then use LONGTEXT.
UNSIGNED TINYINT
UNSIGNED SMALLINT
UNSIGNED INTEGER
UNSIGNED BIGINT
If the length is from 1 through 32,767, then use
VARCHAR (length).
If the length is from 32,768 through
2,147,483,647, then use LONGTEXT.
If the length is from 1 through 65,535, then use
BLOB.
API Version API Version 2016-01-01
192
AWS Database Migration Service User Guide
Target Data Types for SAP ASE
AWS DMS Data Types
NCLOB
CLOB
MySQL Data Types
If the length is from 65,536 through
2,147,483,647, then use LONGBLOB.
If the length is 0, then use LONGBLOB (full LOB support).
If the length is from 1 through 65,535, then use
TEXT.
If the length is from 65,536 through
2,147,483,647, then use LONGTEXT with ucs2 for
CHARACTER SET.
If the length is 0, then use LONGTEXT (full LOB support) with ucs2 for CHARACTER SET.
If the length is from 1 through 65535, then use
TEXT.
If the length is from 65536 through 2147483647, then use LONGTEXT.
If the length is 0, then use LONGTEXT (full LOB support).
Target Data Types for SAP ASE
The following table shows the SAP ASE database target data types that are supported when using AWS
DMS and the default mapping from AWS DMS data types.
For additional information about AWS DMS data types, see
Data Types for AWS Database Migration
.
AWS DMS Data Types
BOOLEAN
BYTES
DATE
TIME
TIMESTAMP
INT1
INT2
INT4
INT8
NUMERIC
REAL4
SAP ASE Data Types
BIT
VARBINARY (Length)
DATE
TIME
If scale is => 0 and =< 6, then: BIGDATETIME
If scale is => 7 and =< 9, then: VARCHAR (37)
TINYINT
SMALLINT
INTEGER
BIGINT
NUMERIC (p,s)
REAL
API Version API Version 2016-01-01
193
AWS Database Migration Service User Guide
Target Data Types for Amazon Redshift
AWS DMS Data Types
REAL8
STRING
UINT1
UINT2
UINT4
UINT8
WSTRING
BLOB
CLOB
NCLOB
SAP ASE Data Types
DOUBLE PRECISION
VARCHAR (Length)
TINYINT
UNSIGNED SMALLINT
UNSIGNED INTEGER
UNSIGNED BIGINT
VARCHAR (Length)
IMAGE
UNITEXT
TEXT
AWS DMS does not support tables that include fields with the following data types. Replicated columns with these data types will show as null.
• User-defined type (UDT)
Target Data Types for Amazon Redshift
The Amazon Redshift endpoint for AWS DMS supports most Amazon Redshift data types. The following table shows the Amazon Redshift target data types that are supported when using AWS DMS and the default mapping from AWS DMS data types.
For additional information about AWS DMS data types, see
Data Types for AWS Database Migration
.
AWS DMS Data Types
BOOLEAN
BYTES
DATE
TIME
DATETIME
INT1
INT2
INT4
Amazon Redshift Data Types
BOOL
VARCHAR (Length)
DATE
VARCHAR(20)
If the scale is => 0 and =< 6, then:
TIMESTAMP (s)
If the scale is => 7 and =< 9, then:
VARCHAR (37)
INT2
INT2
INT4
API Version API Version 2016-01-01
194
AWS DMS Data Types
INT8
NUMERIC
REAL4
REAL8
STRING
UINT1
UINT2
UINT4
UINT8
WSTRING
BLOB
NCLOB
CLOB
AWS Database Migration Service User Guide
Target Data Types for Amazon Redshift
Amazon Redshift Data Types
INT8
If the scale is => 0 and =< 37, then:
NUMERIC (p,s)
If the scale is => 38 and =< 127, then:
VARCHAR (Length)
FLOAT4
FLOAT8
If the length is => 1 and =< 65535, then:
VARCHAR (Length in Bytes)
If the length is => 65536 and =< 2147483647, then:
VARCHAR (65535)
INT2
INT2
INT4
NUMERIC (20,0)
If the length is => 1 and =< 65535, then:
NVARCHAR (Length in Bytes)
If the length is => 65536 and =< 2147483647, then:
NVARCHAR (65535)
VARCHAR (Max LOB Size *2)
Note: The maximum LOB size cannot exceed 31
KB.
NVARCHAR (Max LOB Size)
Note: The maximum LOB size cannot exceed 63
KB.
VARCHAR (Max LOB Size)
Note: The maximum LOB size cannot exceed 63
KB.
API Version API Version 2016-01-01
195
AWS Database Migration Service User Guide
Target Data Types for Amazon DynamoDB
Target Data Types for Amazon DynamoDB
The Amazon DynamoDB endpoint for Amazon AWS DMS supports most Amazon DynamoDB data types.
The following table shows the Amazon AWS DMS target data types that are supported when using AWS
DMS and the default mapping from AWS DMS data types.
For additional information about AWS DMS data types, see
Data Types for AWS Database Migration
.
When AWS DMS migrates data from heterogeneous databases, we map data types from the source database to intermediate data types called AWS DMS data types. We then map the intermediate data types to the target data types. The following table shows each AWS DMS data type and the data type it maps to in DynamoDB:
Real8
UINT1
UINT2
UINT4
UINT8
CLOB
AWS DMS Data Type
String
WString
Boolean
Date
DateTime
INT1
INT2
INT4
INT8
Numeric
Real4
DynamoDB Data Type
String
String
Boolean
String
String
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
Number
String
Data Types for AWS Database Migration Service
AWS Database Migration Service uses built-in data types to migrate data from one database to another.
The following table shows the built-in data types and their descriptions.
AWS DMS Data Types
STRING
Description
A character string.
API Version API Version 2016-01-01
196
AWS Database Migration Service User Guide
Extra Connection Attributes
AWS DMS Data Types
WSTRING
BOOLEAN
BYTES
DATE
TIME
DATETIME
REAL4
REAL8
UINT1
UINT2
UINT4
UINT8
BLOB
INT1
INT2
INT4
INT8
NUMERIC
CLOB
NCLOB
Description
A double-byte character string.
A Boolean value.
A binary data value.
A date value: year, month, day.
A time value: hour, minutes, seconds.
A timestamp value: year, month, day, hour, minute, second, fractional seconds. The fractional seconds have a maximum scale of 9 digits.
A one-byte, signed integer.
A two-byte, signed integer.
A four-byte, signed integer.
An eight-byte, signed integer.
An exact numeric value with a fixed precision and scale.
A single-precision floating-point value.
A double-precision floating-point value.
A one-byte, unsigned integer.
A two-byte, unsigned integer.
A four-byte, unsigned integer.
An eight-byte, unsigned integer.
Binary large object. This data type can be used only with Oracle endpoints.
Character large object.
Native character large object.
Using Extra Connection Attributes with AWS
Database Migration Service
You can specify additional connection attributes when creating an endpoint for AWS Database Migration
Service. The following database engine specific sections show possible settings.
MySQL
Role
Source
Name
eventsPollInterval
Description
Specifies how often to check the binary log for new changes/events when the database is idle.
API Version API Version 2016-01-01
197
Role
Target
Name
AWS Database Migration Service User Guide
MySQL initstmt=SET time-zone afterConnectScript targetDbType parallelLoadThreads initstmt=SET
FOREIGN_KEY_CHECKS=0
Description
Default value: 5
Valid values: 1 - 60
Example: eventsPollInterval=5
Specifies the time zone for the source MySQL database.
Default value: UTC
Valid values: Any three or four character abbreviation for the time zone you want to use. Valid values are the standard time zone abbreviations for the operating system hosting the source MySQL database.
Example: initstmt=SET time_zone=UTC
Specifies a script to run immediately after AWS
DMS connects to the endpoint.
Valid values: Any SQL statement separated by a semi-colon.
Example: afterConnectScript=ALTER SESSION
SET CURRENT_SCHEMA = system;
Specifies where to migrate source tables on the target, either to a single database or multiple databases.
Default value:
MULTIPLE_DATABASES
Valid values: {
SPECIFIC_DATABASE
,
MULTIPLE_DATABASES
}
Example: targetDbType=MULTIPLE_DATABASES
Improves performance when loading data into the MySQL target database. Specifies how many threads to use to load the data into the
MySQL target database. Note that setting a large number of threads may have an adverse effect on database performance since a separate connection is required for each thread.
Default value: 2
Valid values: 1-5
Example: parallelLoadThreads=1
Disables foreign key checks.
API Version API Version 2016-01-01
198
AWS Database Migration Service User Guide
PostgreSQL
Role Name
initstmt=SET time-zone
Description
Specifies the time zone for the target MySQL database.
Default value: UTC
Valid values: A three or four character abbreviation for the time zone you want to use. Valid values are the standard time zone abbreviations for the operating system hosting the target MySQL database.
Example: initstmt=SET time_zone=UTC afterConnectScript=SET
Improves the performance of certain operations on the target MySQL database when converting from Latin1 to UTF8.
PostgreSQL
Role
Source
Name
captureDDLs ddlArtifactsSchema
Description
In order to capture DDL events, AWS DMS creates various artifacts in the PostgreSQL database when the task starts. You can later remove these artifacts as described in the section
AWS Database Migration Service Artifacts from a
PostgreSQL Source Database (p. 84)
.
If this value is set to N, you do not have to create table/triggers on the source database. For more information, see
PostgreSQL Database Without Using the Master
Streamed DDL events are captured.
Default value: Y
Valid values: Y/N
Example: captureDDLs=Y
The schema in which the operational DDL database artifacts are created.
Default value: public
Valid values: String
Example: ddlArtifactsSchema=xyzddlschema
API Version API Version 2016-01-01
199
AWS Database Migration Service User Guide
Oracle
Oracle
Role
Source
Name
addSupplementalLogging
Description
Set this attribute to automatically set up supplemental logging for the Oracle database.
Default value: N
Valid values: Y/N
Example: addSupplementalLogging=Y
Note
If you use this option, you still need to enable supplemental logging at the database level using the following statement: useLogminerReader retryInterval
ALTER DATABASE ADD SUPPLEMENTAL LOG
DATA
Set this attribute to Y to capture change data using the LogMiner utility (the default). Set this option to N if you want AWS DMS to access the redo logs as a binary file. When set to N, you must also add the setting useBfile=Y. For more information, see
Oracle Binary Reader for Change Data Capture
Default value: Y
Valid values: Y/N
Example: useLogminerReader=N; useBfile=Y
Specifies the number of seconds that the system waits before resending a query.
Default value: 5
Valid values: number starting from 1
Example: retryInterval=6
API Version API Version 2016-01-01
200
Role
Target
Name
AWS Database Migration Service User Guide
Oracle archivedLogDestId archivedLogsOnly numberDataTypeScale afterConnectScript useDirectPathFullLoad
Description
Specifies the destination of the archived redo logs. The value should be the same as the
DEST_ID number in the $archived_log table. When working with multiple log destinations (DEST_ID), we recommended that you to specify an Archived redo logs location identifier. This will improve performance by ensuring that the correct logs are accessed from the outset.
Default value:0
Valid values: Number
Example: archivedLogDestId=1
When this field is set to Y, AWS DMS will only access the archived redo logs. If the archived redo logs ares stored on ASM only, the AWS DMS user needs to be granted the ASM privileges.
Default value: N
Valid values: Y/N
Example: archivedLogDestId=Y
Specifies the Number scale. You can select a scale up to 38 or you can select FLOAT. By default the
NUMBER data type is converted to precision 38, scale 10.
Default value: 10
Valid values: -1 to 38 (-1 for FLOAT)
Example: numberDataTypeScale =12
Specifies a script to run immediately after AWS
DMS connects to the endpoint.
Valid values: Any SQL statement separated by a semi-colon.
Example: afterConnectScript=ALTER SESSION
SET CURRENT_SCHEMA = system;
Use direct path full load, specify this to enable/ disable the OCI direct path protocol for bulk loading Oracle tables.
Default value: Y
Valid values: Y/N
Example: useDirectPathFullLoad=N
API Version API Version 2016-01-01
201
Role Name
AWS Database Migration Service User Guide
SQL Server charLengthSemantics
Description
Column length semantics specifies whether the length of a column is in bytes or in characters. Set this value to
CHAR
.
Example: charLengthSemantics=CHAR
SQL Server
Role
Source
Name
safeguardPolicy
Description
For optimal performance, AWS DMS tries to capture all unread changes from the active transaction log (TLOG). However, sometimes due to truncation, the active TLOG may not contain all of the unread changes. When this occurs,
AWS DMS accesses the backup log to capture the missing changes. To minimize the need to access the backup log, AWS DMS prevents truncation using one of the following methods:
1. Start transactions in the database: This is the default method. When this method is used, AWS
DMS prevents TLOG truncation by mimicking a transaction in the database. As long as such a transaction is open, changes that appear after the transaction started will not be truncated. If you need Microsoft Replication to be enabled in your database, then you must choose this method.
2.
Exclusively use sp_repldone within a single
task: When this method is used, AWS DMS reads the changes and then uses sp_repldone to mark the TLOG transactions as ready for truncation.
Although this method does not involve any transactional activities, it can only be used when
Microsoft Replication is not running. Also, when using this method, only one AWS DMS task can access the database at any given time. Therefore, if you need to run parallel AWS DMS tasks against the same database, use the default method.
Default value:
RELY_ON_SQL_SERVER_REPLICATION_AGENT
Valid values: {
EXCLUSIVE_AUTOMATIC_TRUNCATION
,
RELY_ON_SQL_SERVER_REPLICATION_AGENT
}
Example: safeguardPolicy=
RELY_ON_SQL_SERVER_REPLICATION_AGENT
API Version API Version 2016-01-01
202
Role
Target
AWS Database Migration Service User Guide
SQL Server
Name
useBCPFullLoad
BCPPacketSize controlTablesFileGroup
Description
Use this to attribute to transfer data for fullload operations using BCP. When the target table contains an identity column that does not exist in the source table, you must disable the
use BCP for
loading table option.
Default value: Y
Valid values: Y/N
Example: useBCPFullLoad=Y
The maximum size of the packets (in bytes) used to transfer data using BCP.
Default value: 16384
Valid values: 1 - 100000
Eg :
BCPPacketSize=16384
Specify a filegroup for the AWS DMS internal tables. When the replication task starts, all the internal AWS DMS control tables
(awsdms_ apply_exception, awsdms_apply, awsdms_changes) will be created on the specified filegroup.
Default value: n/a
Valid values: String
Example: controlTablesFileGroup=filegroup1
The following is an example of a command for creating a filegroup:
ALTER DATABASE replicate ADD FILEGROUP
Test1FG1;
GO ALTER DATABASE replicate
ADD FILE (
NAME = test1dat5,
FILENAME = 'C:\temp\DATA\t1dat5.ndf',
SIZE = 5MB,
MAXSIZE = 100MB,
FILEGROWTH = 5MB
)
TO FILEGROUP Test1FG1;
GO
API Version API Version 2016-01-01
203
AWS Database Migration Service User Guide
Amazon Redshift
Amazon Redshift
Role
Target
Name
maxFileSize fileTransferUploadStreams
Description
Specifies the maximum size (in KB) of any CSV file used to transfer data to Amazon Redshift.
Default value: 1024
Valid values: 1 - 1048576
Example: maxFileSize=512
Specifies the number of threads used to upload a single file.
Default value: 10
Valid values: 1 - 64
Example: fileTransferUploadStreams=20
SAP Adaptive Server Enterprise (ASE)
Role
Target
Name
enableReplication
Description
Set to
Y
to automatically enable SAP ASE replication. This is only required if SAP ASE replication has not been enabled already.
additionalConnectionProperties
Any additional ODBC connection parameters that you want to specify.
Note
If the user name or password specified in the connection string contains non-Latin characters
(for example, Chinese), the following property is required: charset=gb18030
Using ClassicLink with AWS Database Migration
Service
You can use ClassicLink, in conjunction with a proxy server, to connect an Amazon RDS DB instance that is not in a VPC to a AWS DMS replication server and DB instance that reside in a VPC.
The following procedure shows how to use ClassicLink to connect an Amazon RDS source DB instance that is not in a VPC to a VPC containing an AWS DMS replication instance and a target DB instance.
• Create an AWS DMS replication instance in a VPC. (All replication instances are created in a VPC).
• Associate a VPC security group to the replication instance and the target DB instance. When two instances share a VPC security group, they can communicate with each other by default.
• Set up a proxy server on an EC2 Classic instance.
• Create a connection using ClassicLink between the proxy server and the VPC.
API Version API Version 2016-01-01
204
AWS Database Migration Service User Guide
DB Instance not in a VPC to VPC Using ClassicLink
• Create AWS DMS endpoints for the source and target databases.
• Create an AWS DMS task.
To use ClassicLink to migrate a database on a DB instance not in a VPC to a database on a DB instance in a VPC
1. Step 1: Create an AWS DMS replication instance.
To create a AWS DMS replication instance and assign a VPC security group
1. Sign in to the AWS Management Console and choose AWS Database Migration Service. Note that if you are signed in as an AWS Identity and Access Management (IAM) user, you must have the appropriate permissions to access AWS DMS. For more information on the permissions required for database migration, see
IAM Permissions Needed to Use AWS DMS (p. 42) .
2. On the Dashboard page, choose Replication Instance. Follow the instructions at
Step 2: Create a Replication Instance (p. 25)
to create a replication instance.
3. After you have created the AWS DMS replication instance, open the EC2 service console. Select
Network Interfaces from the navigation pane.
4. Select the DMSNetworkInterface, and then choose
Change Security Groups from the Actions menu.
5. Select the security group you want to use for the replication instance and the target DB instance.
2. Step 2: Associate the security group from the last step with the target DB instance.
To associate a security group with a DB instance
1. Open the Amazon RDS service console. Select Instances from the navigation pane.
2. Select the target DB instance. From Instance Actions, select Modify.
3. For the Security Group parameter, select the security group you used in the previous step.
4. Select Continue, and then Modify DB Instance.
3. Step 3: Set up a proxy server on an EC2 Classic instance using NGINX. Use an AMI of your choice to launch an EC2 Classic instance. The example below is based on the AMI Ubuntu Server 14.04 LTS
(HVM).
To set up a proxy server on an EC2 Classic instance
1. Connect to the EC2 Classic instance and install NGINX using the following commands:
Prompt> sudo apt-get update
Prompt> sudo wget http://nginx.org/download/nginx-1.9.12.tar.gz
Prompt> sudo tar -xvzf nginx-1.9.12.tar.gz
Prompt> cd nginx-1.9.12
Prompt> sudo apt-get install build-essential
Prompt> sudo apt-get install libpcre3 libpcre3-dev
Prompt> sudo apt-get install zlib1g-dev
Prompt> sudo ./configure --with-stream
Prompt> sudo make
Prompt> sudo make install
2. Edit the NGINX daemon file, /etc/init/nginx.conf, using the following code:
# /etc/init/nginx.conf – Upstart file
API Version API Version 2016-01-01
205
AWS Database Migration Service User Guide
DB Instance not in a VPC to VPC Using ClassicLink description "nginx http daemon" author “email" start on (filesystem and net-device-up IFACE=lo) stop on runlevel [!2345] env DAEMON=/usr/local/nginx/sbin/nginx env PID=/usr/local/nginx/logs/nginx.pid
expect fork respawn respawn limit 10 5 pre-start script
$DAEMON -t
if [ $? -ne 0 ]
then exit $?
fi end script exec $DAEMON
3. Create an NGINX configuration file at /usr/local/nginx/conf/nginx.conf. In the configuration file, add the following:
# /usr/local/nginx/conf/nginx.conf - NGINX configuration file worker_processes 1; events {
worker_connections 1024;
} stream {
server {
listen <DB instance port number>; proxy_pass <DB instance identifier>:<DB instance port number>;
}
}
4. From the command line, start NGINX using the following commands:
Prompt> sudo initctl reload-configuration
Prompt> sudo initctl list | grep nginx
Prompt> sudo initctl start nginx
4. Step 4: Create a ClassicLink connection between the proxy server and the target VPC that contains the target DB instance and the replication instance
Use ClassicLink to connect the proxy server with the target VPC
1. Open the EC2 console and select the EC2 Classic instance that is running the proxy server.
2. Select ClassicLink under Actions, then select Link to VPC.
3. Select the security group you used earlier in this procedure.
4. Select Link to VPC.
API Version API Version 2016-01-01
206
AWS Database Migration Service User Guide
DB Instance not in a VPC to VPC Using ClassicLink
5. Step 5: Create AWS DMS endpoints using the procedure at
. You must use the internal EC2 DNS hostname of the proxy as the server name when specifying the source endpoint.
6. Step 6: Create a AWS DMS task using the procedure at
Step 4: Create a Task (p. 32) .
API Version API Version 2016-01-01
207
AWS Database Migration Service User Guide
Document History
The following table describes the important changes to the documentation since the last release of the
AWS Database Migration Service.
• API version: 20160101
• Latest documentation update: March 7, 2017
Change
New feature
New feature
New feature
New feature
New feature
New feature
New feature
Description
Added support for using Amazon Dynamo as a target.
For more information, see
Database as a Target for AWS Database Migration
Added support for using MongoDB as a source. For more information, see
Using MongoDB as a Source for AWS
Database Migration Service (p. 90)
.
Added support for using Amazon S3 as a target. For more information, see
Using Amazon S3 as a Target for AWS
Database Migration Service (p. 103)
.
Adds support for reloading database tables during a
migration task. For more information, see Reloading
Tables During a Task (p. 120) .
Added support for events and event subscriptions.
For more information, see
Added support for SSL endpoints for Oracle. For
more information, see SSL Support for an Oracle
Added support for using Change Data Capture (CDC) with an Amazon RDS PostgreSQL DB instance. For more information, see
Setting Up an Amazon RDS PostgreSQL
DB Instance as a Source (p. 82)
.
Date Changed
April 10, 2017
April 10, 2017
March 27, 2017
March 7, 2017
January 26, 2017
December 5, 2016
September 14, 2016
API Version API Version 2016-01-01
208
AWS Database Migration Service User Guide
Change Description
New region support Added support for the Asia Pacific (Mumbai), Asia Pacific
(Seoul), and South America (São Paulo) regions. For a
list of supported regions, see What Is AWS Database
.
New feature Added support for ongoing replication. For more information, see
.
New feature
New feature
Added support for secured connections using SSL. For
more information, see Using SSL With AWS Database
Added support for SAP Adaptive Server Enterprise (ASE) as a source or target endpoint. For more information, see
Using a SAP ASE Database as a Source for AWS Database
Using a SAP ASE Database as a Target for AWS Database Migration Service (p. 103)
.
New feature
New feature
Added support for filters to move a subset of rows from the source database to the target database. For more information, see
Using Source Filters (p. 144) .
Added support for Amazon Redshift as a target endpoint.
For more information, see
Database as a Target for AWS Database Migration
General availability Initial release of AWS Database Migration Service.
Public preview release
Released the preview documentation for AWS Database
Migration Service.
Date Changed
August 3, 2016
July 13, 2016
July 13, 2016
July 13, 2016
May 2, 2016
May 2, 2016
March 14, 2016
January 21, 2016
API Version API Version 2016-01-01
209
Stiahnuť
Verejný odkaz bol aktualizovaný
Verejný odkaz na váš chat bol aktualizovaný. You may view and manage your chat links after registration here.
Verejný odkaz na dokument
Reklama
