Untitled - Pride of Hawaii

Untitled - Pride of Hawaii
table of contents
SectioN
PAGE
OUR WALL OF FAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
THE SONANCE STORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ARCHITECTURAL SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
NacSound FOR SONANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
INVISIBLE SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
VISUAL PERFORMANCE SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Visual
Visual
Visual
Visual
Performance
Performance
Performance
Performance
Series
Series
Series
Series
Large Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Medium Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Small Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Woofers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
26
37
40
SURFACE MOUNT SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
SONANCE ORIGINAL SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Sonance
Sonance
Sonance
Sonance
Original
Original
Original
Original
Series
Series
Series
Series
Large Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Medium Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Small Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Woofers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
49
52
61
64
contractor series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Sonance Contractor Series Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
CINEMA SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Cinema Series In-Wall & In-Ceiling Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cinema Series Cabinet Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cinema Series Subwoofers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Visual Performance & Original Series Home Theater Speakers . . . . . . . . . . . . . . . . . . . . . . . . . .
Cinema Select Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75
78
79
82
86
OUTDOOR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Sonance Extreme Series Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sonance Mariner Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sonance Outdoor Series Rock Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SoundHenge Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
91
93
96
97
COMMERCIAL SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Commercial
Commercial
Commercial
Commercial
Commercial
Series
Series
Series
Series
Series
Invisible Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wide Dispersion Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FastMount Outdoor Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indoor/Outdoor Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
In-Ceiling Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
101
102
103
105
106
speaker aCCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Speaker Grilles and Coverplates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation and Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Acoustic Enclosures, Backboxes and Backcans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cinema Series In-Wall Subwoofer Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
In-Wall Treatments and Electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ELECTRONICS and electronic accessories . . . . . . . . . . . . . . . . . . . . .
Sonance
Sonance
Sonance
Sonance
Sonance
Sonance
Sonance
Sonance
Sonance
Sonamp Amplifiers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Home Audio Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keypad Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Speaker Distribution Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Impedance-Matching Volume Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard Volume Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio/Video Automation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Balanced Audio Sender/Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OptiLinQ IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
109
119
124
126
129
130
131
137
140
142
143
144
146
147
148
iPort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
iPort Control Mount Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
iPort In-Wall Docking Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
iPort Free-Standing Docking Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Index A: Alphabetical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Index B: Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
3
ordering information
NEW DEALER PROGRAMS AND ONGOING
SUPPORT PROGRAMS
As your business partner, Sonance® offers several programs to
our new and continuing dealers for displaying, demonstrating
and selling Sonance products. Please contact your Sonance
Representative for further details.
PURCHASING OPTIONS
We accept Visa, MasterCard, and American Express.
ORDERING INFORMATION
Sonance continues to offer you the best in customer care and
product selection. For your ordering convenience, you can
order by phone, fax, or SonalinQ. SonalinQ is our businessto-business extranet, and it is available 24 hours a day, 7 days
a week. Through SonalinQ, you can place an order, check the
status of an order, and look up product specifications and pricing
when it is convenient for you.
WARRANTY
Please contact our Customer Care Department at (800) 5820772 for complete warranty details for all products (i.e., warranty
period, exclusions, additional limitations, obtaining authorized
service, etc.).
Sonance and iPort warrant, to the first end-user purchaser,
that our products, when purchased from an authorized Dealer/
Distributor and installed by a certified Installer, will be free from
defective workmanship and materials. Sonance and iPort will,
at its option and expense during the warranty period (warranty
periods vary by product), either repair the defect or replace the
product with a new or remanufactured product or a reasonable
equivalent. All warranties are non-transferable.
TO PLACE AN ORDER BY PHONE: (800) 582-0771
To qualify for the warranty, you must (1) contact your authorized
Sonance or iPort Dealer/Installer or call our Customer Care
Department at (800) 582-0772 within the warranty period,
(2) obtain a Return Materials Authorization (RMA) number, and
(3) deliver the product to Sonance or iPort (shipping prepaid)
during the warranty period, together with the original sales
receipt, invoice, or other satisfactory proof of purchase.
TO FAX AN ORDER: (800) 538-5151
(949) 361-5151
MERCHANDISE RETURN
TECHNICAL QUESTIONS: (800) 582-0772
SONALINQ®: HTTP://LOGIN.SONANCE.COM
GENERAL/ADMINISTRATION: (800) 582-7777
(949) 492-7777
SHIPPING
Sonance ensures your order will be shipped promptly. We offer
a variety of shipping methods to meet your requirements. Please
inquire at the time you place your order as to the best shipping
method.
NOTES
Grilles: Metal or cloth grilles are available where noted.
Weather Resistance: Sonance weather-resistant models include:
Prior to returning any merchandise for service, exchange, or credit,
approval must be authorized by Sonance and an RMA number
assigned. This number must appear on every shipping carton,
or the shipment will be refused and returned to the customer.
All returned products must match the authorized quantity and
part numbers issued on the RMA. The customer is responsible
for any discrepancies in quantity or product. Additional returned
products not covered by the RMA will be returned to the customer
or will be subject to a 25% restocking fee at Sonance’s discretion.
Product claimed "defective" that shows no defect will result in
return to the customer or imposition of a 25% restocking fee at
Sonance’s option. No credit will be issued when the returned
merchandise displays signs of misuse or abuse.
Painting: Speakers, grilles, and frames come in a matte white
finish that can be painted.
Please ensure all returns are packed in their original packaging.
No credit will be issued for products returned in poor packaging
that has resulted in shipping damage. Damaged product and
poor packaging will be returned to the customer of origin. No
repair will proceed if product is returned in poor packaging
that has resulted in shipping damage. Any product returned
for service will be repaired or replaced at Sonance’s option
consistent with Sonance’s repair policy.
Half-Pair Pricing: If a speaker has a standard unit of measure of
a pair, a small premium of $25.00 will be added when a pair is
broken for the sale of a single speaker.
Any merchandise returned for credit is subject to a 25% restocking
fee. This fee will be waived with a three to one offsetting order.
Customer is responsible for shipping charges.
Visual Performance® Extremes, Mariner, and Sonance Extremes.
Weather-resistant speakers feature non-corroding screws, coated
dustcaps, protected connectors, and aluminum grilles. They will
tolerate occasional exposure to moisture. These speakers are not
waterproof.
NOTE: Items returned which were not purchased from an
authorized dealer will not be repaired. They will be returned "as
is" to the sender freight collect.
Note: Discontinued items are not eligible for return but may still
qualify for a warranty
SONANCE
212 Avenida Fabricante
San Clemente, CA 92672-7531
www.sonance.com
4
©2010 Ellipse, FastMount, iPort, Mariner, OptiLinQ, Roto-Lock, SAT, Single Stereo Technology, Sonafill, Sonamp,
Sonance, Sonance Architectural Series, Sonance Cinema, Sonance Navigator, Sonance Symphony, SoundHenge,
and Visual Performance are registered trademarks of Dana Innovations. Sonance ThinLine is a pending trademark
of Dana Innovations.
BBE is a registered trademark of BBE Sound, Inc. Dacron is a registered trademark of DuPont Corporation. iPod, iPad,
iPhone and iTunes are trademarks or registered trademarks of Apple Inc. Santoprene is a registered trademark of
Monsanto Corporation. SnapTrack is a registered trademark of AUGAT. THX is a registered trademark of THX, Ltd.
A W A R D -W I NN I N G SONANCE P R OD U CTS
OUR WALL OF FAME
ASSOC I AT I ON M E M BE R S H I P S
s p o n s o r s hip s
2009
Volunteer of the Year
Excite Award for
Outstanding Design
Sonance Cinema Series
In-Ceiling Speakers
CEDIA
Manufacturer Excellence Award
2008 Best New Product
Visual Performance Series
Excite Award for Excellence
in Custom-Installed
Technologies and Electronics
Visual Performance Series
2008
CE Pro
BEST Award
Sonance Cinema Series
In-Ceiling Speakers
CEDIA
Product Hall Of Fame
Sonance I Speaker
2007
Audioholics
Consumer Excellence Award
VP67R
Excite Award for Excellence
in Custom-Installed
Technologies and Electronics
Architectural Series
Excite Award for Excellence
in Custom-Installed
Technologies and Electronics
iPort FS
CEDIA Award
Best New Product
Architectural Series
5
2007
Residential Systems Award
Best Speakers
Architectural Series
ADEX Awards
Mariner – Silver
Symphony – Gold
Electronic House
Product of the Year
Virtuoso V834dr
EHX Multi-Room Audio/Video Award
Best In-Ceiling Speakers
($1,000 or more/pair)
Symphony S625tr
TecHomeBuilder
High Impact Product of the Year
DAB1 Distributed Audio System
Audio Video International
Hi-Fi Grand Prix Award
Symphony Extreme XT
Electronic House
Product of the Year
Cinema Ultra II THX Speakers
CES Innovations Award for
Design and Engineering
Trio Triple Tuner
CES Innovations Award
ADEX Award for Design Excellence
Ellipse 1.0 LCR In-Ceiling Speakers
CEDIA – Best Custom
Installation Product of the Year
Symphony Extreme Speakers
Residential Systems Award
Product Design of the Year
Architectural Series
EHX Multi-Room
Audio/Video Award
Best Outdoor Speakers
Mariner 82
2004 & 2005
2005 & 2006
Electronic House Award
Product of the Year
Architectural Series
2003 & 2004
EHX
Distributed Audio Award
DAB1 Distributed Audio System
6
Excite Award for Excellence
in Custom-Installed
Technologies and Electronics
Ellipse 2.0
2003
CES
Innovations Award
Sonamp SAT275
Excite Award for Excellence
in Custom-Installed Technologies
and Electronics
Navigator K2 In-Wall Keypad
Electronic House Product of the Year
ADEX Award for Design Excellence
Navigator K2 In-Wall Keypad
2002
Electronic House
Product of the Year
Ellipse 1.0 LCR
In-Ceiling Speakers
Audio Video International
Hi-Fi Grand Prix Award
Sonamp ASAP2SAT Amplifier
Symphony 622tr In-Ceiling
Speakers
CEDIA Lifetime Achievement Award
S cott S truther s (S onance
cofounder )
For his innovations in the custom
installation industry. Credited with
inventing the in-wall speaker concept for
residential use.
CE Pro Product of the Year
Silhouette In-Wall Speakers
2001
Audio Video International
Hi-Fi Grand Prix Award
Virtuoso 832DR
In-Ceiling Speakers
Electronic House Product of the Year
Virtuoso In-Ceiling Speakers
Audio Video International
Hi-Fi Grand Prix Award
Symphony 634T In-Wall Speakers
Audio Video International
Hi-Fi Grand Prix Award
Mariner 200 Outdoor Speakers
2000
Audio Video International
Hi-Fi Grand Prix Award
Sonamp 1250MKII Amplifier
2000 CES Innovations Award
Silhouette In-Wall Speakers
7
I n v e n t. L e a d. R e i n v e n t.
THE SONANCE STORY
In 1982, Sonance® invented the in-wall speaker, forever changing the
relationship between audio and architecture.
Sonance founders
Scott Struthers and Geoff Spencer
founded Sonance in 1983.
With its introduction of the first in-wall speakers for the consumer
market, Sonance forever changed the way architects and interior
designers could integrate sound into the design of a room.
In originating the idea of the in-wall speaker, suddenly the placement
of speakers was limitless, with both the walls and ceilings becoming
part of the blank canvas for the architect and designer. With
Sonance, speakers could be less obtrusive, but no less acoustically
precise. With Sonance, speakers made sound an element of design
— like light, form, and color.
That creative freedom, that power to see architecture and audio
blending in new ways, is what Sonance has always offered the
design community and its clients. At the same time, Sonance
has continued to innovate, leading the industry to solutions that
designers, custom installers, and design-sensitive audiophiles
recognize as truly breakthrough.
Years after we invented the first in-wall speaker, Sonance continues
to set the standard for premium loudspeakers, bridging the gap
between aesthetic appeal and acoustic performance — and
transforming the choice of speaker from an afterthought to an
integral element of design.
Blending architecture, design, and audio, Sonance continues to
invent, lead, and reinvent the in-wall speaker category — constantly
changing the way the world looks at audio.
9
ARCHITECTURAL SERIES
The First Truly Flush-Mount, Trimless Speaker
Take a good look at Sonance Architectural Series®, and you'll never look at speakers the same way
again. The first perfectly flush, completely trimless in-wall and in-ceiling speakers precisely align with
the surrounding surface to seamlessly integrate our legendary sound quality into your unique design
vision. With Sonance Architectural Series, there's no reason for audio quality to come at the expense
of design integrity.
HOW TO ORDER
For information on how to become an Architectural Series certified dealer and to obtain pricing, please contact your Sonance
representative.
SIZES, SHAPES, MODEL NUMBERS
BPS-1 Bandpass Subwoofer
Shallow depths allow installation in areas that cannot accommodate conventional speakers.
Single-StereoX6R SSTX6S SST
Combine left and right signals into one speaker — perfect for use in small spaces.
*Requires a Sonamp® A800 amplifier (available separately, see page 65).
ACOUSTIC performance levels
(Z) Reference-quality beryllium drivers
Reference-quality beryllium drivers represent the absolute state
of the art in home audio.
(X) Audiophile-quality carbon fiber drivers
Audiophile-quality carbon fiber drivers that are sure to please
the most discriminating listener.
The Architectural Series Bandpass Subwoofer (BPS-1) adds deep, powerful bass
to any audio system. Remaining completely hidden from view, the BPS-1 delivers its bass energy utilizing an Architectural Series mounting platform and a
bandpass connector (both available separately).
The Architectural Series grille provides a
discreet complement to the surrounding
architectural space. Requires a Sonamp
A150 amplifier (available separately, see
page 43).
Mounting platforms
s o n a n c e a r c hi t e c t ur a l s e ri e s
RoundSquareRectangle
Small
Z4R / X4R
Z4S / X4S
Z4 / X4
Medium
Z6R / X6R
Z6S / X6S
Z6 / X6
Large
Z8R / X8R
Z8S / X8S
Z8 / Z8F / X8
X8WR*X8WS*X8W*
Woofer
ThinLineX6R TLX6S TLX6 TL
Gypsum Panel Bracket
Available in ½" and 5/8" depths for most drywall applications.
Universal Bracket
Designed for both new and existing construction for standard drywall applications, non-standard drywall applications
such as plaster and finishes exceeding 5/8" in thickness, and cement-based substrates. Some installations may require
Stud-mount Rails (sold separately). N ot available for L arge R ectangle A rchitectural S eries speakers .
finish options
Cloth grille
no trim*
Fascia Option (Z8F only)
Micro-perforated metal grille
no trim
micro-trim
Mounted perfectly flush with the surface and finished with a paintable
grille, Sonance Architectural Series speakers recede into subtle geometric
forms. Precision Fit finish components assure perfect alignment.
*No-trim cloth grilles are only available for medium round and square and
small round and square Architectural Series speakers.
satin black
satin white
With exposed speaker drivers and a completely
flush and smooth transition to the surrounding
wall, the Z8 is available with a flawless paintable
aluminum fascia in satin black or white.
11
11
NacSound FOR SONANCE
NACSound’s Italian hand-crafted ceramic loudspeakers are designed to become an integral element of
an architectural space: Their unique forms are designed by artists and sound engineers combining the
finest materials and acoustic components. Beautiful ceramic enclosures are hand-formed and finished
in a variety of exquisite glazes to create an architectural dimension where sound, space, color, and light
work in perfect harmony.
Sonance is the exclusive provider of NACSound products in North America.
NACSOUND FOR SONANCE
NACSound’s omni-directional technology enables the speakers to emit sound waves spherically — equally in all
directions — to stimulate the senses of the listener. Suspended from the ceiling and free from the constraints faced
by other speakers, unwanted vibration is virtually eliminated. All of this results in a sound that is rich and lifelike and
highly consistent wherever the listener is positioned.
Kayak*
With an aluminium body, it has two coaxial
multidirectional speakers that face each
other across a central reflector held in place
by steel spacers. It can be easily positioned
horizontally between two walls or pillars,
vertically between the floor and ceiling, or
diagonally, if preferred.
Omni
Omni was the first NACSound speaker to be developed using
omni-directional technology and transmission line reflex.
It was also the first to benefit from the enhanced sound
quality offered from being hung from the ceiling. With a
power handling of 70W, it offers a sound that is natural and
lifelike and, thanks to an excellent scan speak tweeter, it yields
superbly clean and precise sound imaging at all frequencies.
With its unique, three-dimensional character, the sound that
Omni provides will please the most discerning listener.
Zemi*
A spherical, ceramic speaker with its own unique
aesthetics, Zemi can be hung from the ceiling or
placed on any convenient surface using its own holder.
Zemi uses NACSound’s central reflex technology — a
specially-positioned conical ceramic enclosure that
creates natural, high-quality sound with exceptional
clarity of image. With power handling of 70W and
frequency response down to 40Hz, Zemi is designed
for all types of music and responds perfectly to any
amplifier.
Zemi
NACSO U ND FO R SONANCE
Kayak
Omni
*Illustrated mounting brackets sold separately.
omni/zemi
standard Finishes
black
matte white
omni/zemi
elegant Finishes
matte orange
platinum
graphite
kayak Finishes
brushed steel
painted steel
omni/zemi limited Finishes
blue-gold
reflected gold
HOW TO ORDER
reflected copper
striped platinum
spiral platinum
terracotta*
zebra*
* Available only on Omni
For availability and detailed pricing information, please contact your Sonance representative.
13
13
INVISIBLE SERIES
Invisible Speakers for Visionary Interiors
Imagine that. The ability to outfit any room or space with sound without creating clutter, distractions,
or disruptions to the interior design. Sonance Invisible Series speakers vanish into your room design,
delivering ambient music that emanates directly from walls and ceilings. Sonance Invisible Series
speakers complement some of the most prominent and prestigious properties in the world, including
distinctive residences, glamorous resorts, and exclusive retail establishments.
SONANCE I N V I S I BLE SE R I ES S P EAKE R S
music should be heard, not seen. The Sonance Invisible Series SA3 and SA1.5 are extended-bandwidth
speakers that combine planar diaphragm midrange/tweeter technology with the proven low-frequency
performance of a direct-radiating woofer. The SA3, SA1.5, and SAW are "finish up to" components. The SA2 is a
full-range, two-way planar diaphragm design and a "finish over" component. For information on how to become
an Invisible Series certified dealer, please contact your Sonance representative.
invisible series "finish up to" speakers
SA3
SPECIFICATIONS
PART#................. 92484
QUANTITY.......... PAIR
sa1.5
SPECIFICATIONS
Tweeter:
48 in2 (310 cm2) planar diaphragm, driven by a
1.02" (26mm) voice coil
Woofer:
33 in2 (210 cm2) low-frequency radiator, driven by a
1" (25mm) voice coil
Frequency Response:
50Hz – 20kHz ±3dB
Impedance:
8 ohms nominal
80 watts RMS
Power Handling:
Sensitivity:
88dB (1W/1 meter)
Dispersion:
140° hemispherical up to 10kHz
Finish:
Primed surface, ready to finish up to and paint
Overload Protection:Two independent self-resetting gel switches
(low-frequency and high-frequency)
Dimensions (W x H x D):
16" x 12 x 37∕ 8" (406mm x 305mm x 98mm)
Shipping Weight:
12 lbs (5.4kg) pair
PART#................. 92485
QUANTITY.......... PAIR
N V I S RI BLE CSE
R IM
ESA ® SE R I ES
H O M E T HI EATE
I NE
Tweeter:
48 in2 (310 cm2) planar diaphragm, driven by a
1.02" (26mm) voice coil
Woofer:
50 in2 (323 cm2) low-frequency radiator, driven by a
1" (25mm) voice coil
Frequency Response:
40Hz – 20kHz ±3dB
Impedance:
8 ohms nominal
Power Handling:
80 watts RMS
Sensitivity:
90dB (1W/1 meter)
Dispersion:
140° hemispherical up to 10kHz
Finish:
Primed surface, ready to finish up to and paint
Overload Protection:Two independent self-resetting gel switches
(low-frequency and high-frequency)
Dimensions (W x H x D):
16" x 24" x 37∕ 8" (406mm x 610mm x 98mm)
Shipping Weight:
20 lbs (9kg) pair
SAw*
SPECIFICATIONS
Woofer:Two 50 in2 (323 cm2) low-frequency radiators,
each driven by a 1" (25mm) voice coil
Frequency Response:
35Hz – 150Hz ±3dB
Impedance:
8 ohms nominal
Power Handling:
150 watts RMS
Sensitivity:
90dB (1W/1 meter)
Dispersion:
180° hemispherical up to 150Hz
Finish:
Primed, ready to finish up to and paint
Overload Protection:Self-resetting gel switch
Dimensions (W x H x D):
16" x 24" x 37∕ 8" (406mm x 610mm x 98mm)
Shipping Weight:
17 lbs (7.7kg) each
*Requires Sonamp® A800 (available separately, see page 65)
PART#................. 92486
QUANTITY.......... each
15
15
Sonamp power amplifiers
SONAMP A800 woofer amplifier
Required for the SAW, the Sonamp A800 provides 150 watts of power and flexible controls that
allow the woofer's performance to be optimized for a wide variety of installation situations.
SPECIFICATIONS
PART# (120V)...... 92306
QUANTITY.......... EACH
PART# (230V).......92454
QUANTITY.......... EACH
RACK EARS KIT
PART#................. 90603
QUANTITY.......... PAIR
Number of Channels:
Power Output:
Power Output (program):
Frequency Response:
Total Harmonic Distortion:
Signal-to-Noise Ratio: Input Sensitivity: Input Impedance: Power Consumption: 1
90 watts RMS @ 4 ohms
150 watts @ 4 ohms
31Hz – 78Hz (variable to 63Hz) +1/-3dB
0.05% 20Hz – 300Hz @ 8 ohms
-95dB (w/22khz A-WTG filter)
45mV for 90 watts RMS @ 4 ohms (stereo inputs);
90mV (LFE input)
20k ohms
160 watts maximum (4 ohms, full power);
13 watts idle (no signal)
AC Fuse (120V Version):
4A (T4AL ~250V)
AC Fuse (230V Version):
2A (T2AL ~250V)
Heat Output: 98 BTU/HR @ 8 ohms (rock music)
140 BTU/HR @ 4 ohms (rock music)
Dimensions (W x H x D):
16¾" x 4" x 13½" (425mm x 102mm x 343mm)
Dimensions w/Rack Ears (W x H x D):19" x 4" x 13½" (489mm x 102mm x 343mm)
Rack Space Requirements:
2U
Shipping Weight: 20 lbs (9.1kg)
sa3/sa1.5/saw accessories
sa3, saw, and sa1.5 space savers
eusable units designed to be installed in new construction to reserve locations for the speakers
R
during the early stages of construction. At the appropriate time, the speaker installer removes the
Space Saver and replaces it with the Invisible Series speaker.
Available for the SA3/SAW and the SA1.5.
SA3/SAW Space Saver SPECIFICATIONS
PART#
(SA3/SAW).......... 92723
QUANTITY.......... EACH
Dimensions (W x H x D):
Shipping Weight:
Net Weight:
SA1.5 Space Saver SPECIFICATIONS
Dimensions (W x H x D):
Shipping Weight:
Net Weight:
PART# (SA1.5)..... 92722
QUANTITY.......... EACH
16
16" x 24" x 3½" (406mm x 610mm x 89mm)
8 lbs (3.6kg) each
5 lbs (2.3kg) each
12" x 16" x 3½" (305mm x 406mm x 89mm)
5 lbs (2.3kg) each
3 lbs (1.4kg) each
invisible series "finish over" speakers
SA2*
SPECIFICATIONS
Radiating Surface:
Tweeter System:
294.0 in2 (1869 cm2) planar diaphragm
0.82 lb (0.37 kg) magnet with 1.02" (26mm) voice coil;
12dB/octave high-pass crossover @ 2kHz
Woofer System:
0.82 lb (0.37kg) magnet with 1.02" (26mm) voice coil;
12dB/octave low-pass crossover
Frequency Response:
70Hz – 20kHz ± 4dB
Impedance:
4 ohms nominal, 3.5 ohms minimum
Power Handling: 60 watts RMS as per EIA standard RS-426-A
Primary voltage: 70V; 100V
Transformer:
Primary taps (70V): 0.5W, 1W, 2W, 4W, 8W, 32W
Primary taps (100V):
1W, 2W, 4W, 8W, 16W, 32W
8-ohm bypass
Sensitivity:
90dB (1W/1 meter)
Dispersion:
140° hemispherical, up to 20kHz
Overload Protection:Two independent self-resetting gel switches (low-frequency
and high-frequency)
Dimensions (W x H x D):
14" x 21" x 3" (356mm x 534mm x 76mm)
Shipping Weight:
16 lbs (7.3kg) each
PART#................. 40046
QUANTITY.......... EACH
*Now sold as each
*The SA2 speaker replaces the SA2C and SA2R speakers.
Note: Requires PBB4 backbox for in-wall installations or PBB6 backbox for in-ceiling
installations.
sa2 accessories
SA2 backboxes
PBB4 Dimensions (W x H x D):
14¼" x 21¼" x 3¼" (362mm x 540mm x 83mm)
PBB6 Dimensions (W x H x D):
14¼" x 21¼" x 5¼" (362mm x 540mm x 133mm)
PBB4 Shipping Weight:
8.4 lbs (3.81kg)
PBB6 Shipping Weight:
10.1 lbs (4.58kg)
Certifications:UL1480
PART# (PBB4)...... 40065
PART# (PBB6)...... 40066
QUANTITY.......... EACH
i n vi s i b l e SE R I ES
Metal backboxes that reduce sound transmission into adjacent spaces and are required for all
SA2 installations in spaces deeper than 4 inches. Available in 4-inch depth for walls (PBB4) and
6-inch depth for ceilings (PBB6). UL 1480 certification.
SA2 installation compensation circuit
The ICC is a 2-channel active equalizer that is specifically designed to provide correction for
SA2 speaker performance variations due to surface finish and installation placement. Provides
variable low-frequency and high-frequency equalization tailored to maximize SA2 performance
as well as spatial enhancement circuitry that expands the stereo soundstage. Occupies 1U in a
standard 19-inch equipment rack (½-rack width). Includes rack-mount extension panel, panel
link, and hardware.
specifications
Inputs:
Unbalanced (gold-plated RCA)
Outputs:
Processed; direct (gold-plated RCA)
Controls: LF compensation, HF compensation,
spatial enhancement, output level, cavity compensation
Dimensions (W x H x D):
91∕ 2" x 123∕ 32" x 5" (241mm x 44mm x 128mm)
Rack Space Requirements:
1U (½-rack width)
Shipping Weight:
2.9 lbs (1.4kg)
PART#................. 40067
QUANTITY.......... EACH
SA2 replacement installation kit
Replacement kit contains required installation supplies that are included with the SA2. Each kit
contains the following items (enough to install two SA2 speakers):
(2)
(2)
(4)
(4)
Vellum overlays
8-oz bags of joint compound
#10 – 24 x 3 hex screws
#8 washers
(4)
(1)
(1)
(1)
High-density rubber standoffs
5/32 hex wrench
8-oz jar of overlay adhesive
Measuring cup
PART#................. 40069
QUANTITY.......... EACH
17
VISUAL PERFORMANCE SERIES
Visual Performance® series speakers offer extraordinary sound quality in an understated design,
complementing your space without competing for attention. The Visual Performance Series features
striking updated aesthetic grilles with small trim that blend gracefully into any designed environment,
allowing your music to permeate the room without disturbing the design of your space.
SONANCE V I S U AL P E R FO R M ANCE SE R I ES
MODERN STYLE, OUTSTANDING PERFORMANCE. Visual Performance Series speakers combine elegant, modern
style with outstanding audio performance. Featuring five performance levels, three sizes, and three shapes, Visual
Performance Series speakers are designed to fit the audio needs of the most discriminating listener. Using traditional
installation methods, Visual Performance Series speakers are easily installed in either new or existing construction and
feature a new one-piece grille and trim assembly, making painting a simple and quick one-step process.
In addition to the standard rectangle, round, and square shapes, Visual Performance Series speakers are also available
in special-purpose versions that dramatically increase installation options:
Bandpass Subwoofer (BPS): The Bandpass Subwoofer (BPS-1) adds deep, powerful bass to any audio system.
Remaining completely hidden from view, the BPS-1 delivers its bass energy utilizing a bandpass connector (available
separately). The Visual Performance Series grille provides a discreet complement to the surrounding architectural space.
Requires a Sonamp A150 amplifier (available separately, see page 43).
ThinLine (TL): Featuring shallow 2½" – 3" (64mm – 77mm) depths, Visual Performance Series ThinLine speakers deliver a
very high level of audio performance while allowing installation in areas that are too shallow to accommodate conventional
speakers.
Extreme (XT): Extreme speakers are engineered for high-humidity areas and are built to survive extreme temperatures —
from -30°F up to +175°F — while maintaining superior sound quality. Visual Performance Series Extreme speakers are
also shock-resistant and can withstand the pelting of the high seas and salty air, making them an excellent choice for
marine applications.
Woofer (W): Visual Performance Series woofers enhance the bass performance of any home theater or distributed audio
system without visually disturbing the designed space. Must be used in conjunction with a Sonamp® A800 amplifier
(available separately, see page 65).
Home Theater front channel (lcr): Visual Performance Series LCR speakers are ideal in all three front-channel
home theater applications or as the center-channel counterpart for a Visual Performance Series left and right channel
speaker pair.
Home Theater Surround (SUR): Visual Performance Series Surround speakers feature a precisely mounted dualtweeter array that creates a diffuse soundfield that is ideal for in-ceiling surround channel applications.
V I S U AL P E R FO R M ANCE SE R I ES
Single Stereo Technology® (SST): Visual Performance Series Single Stereo speakers combine both left and right
signals into one speaker. They are perfect for use in small spaces, such as bathrooms and hallways.
New micro-trim grilles (0.20”
of trim) give the Visual
Performance
speakers
a
clean, sleek appearance that
seamlessly integrates into any
designed space. The grilles
attach via powerful magnets for
a simple and quick installation.
A one-step paint process saves
time compared to traditional
flanged speakers.
ORIGINAL SERIES - 1.25” FLANGE
VISUAL PERFORMANCE SERIES - THIN 0.20” TRIM
19
V i s u a l P e r f o rm a n c e S e ri e s L a rg e Sp e a k e r s
Visual Performance Series Large speakers deliver legendary Sonance acoustic performance in a stunning new design that
minimizes the visual impact of the speaker frame and grille. The installed speaker is clean and modern with a low profile that
complements interior design better than any traditional architectural speaker. Ideal for both new and existing construction,
Visual Performance Large speakers fit perfectly into traditional speaker installations using standard installation methods. With
this new design, paint matching is a simple one-step process involving only the magnetic grilles. Available in three shapes
(rectangle, round, and square) and three performance levels, Sonance Visual Performance Series Large speakers provide the
perfect loudspeaker for your unique design requirements.
Visual Performance series large rectangle speakers
visual performance large rectangle speaker
special features One-piece, trimless, low-profile magnetic
grille • Simplified one-step painting process • Pivoting Sonic
Eye directs sound at listeners for life-like stereo performance,
even when placement options are limited • Advanced
driver materials for extremely accurate musical performance
• Eight-inch diameter woofers deliver deep, powerful bass
• Extended woofer pole-piece dissipates heat and increases
power handling (VP89, VP87) • Bi-wire capability for
uncompromised performance (VP89) • Three-position
tweeter adjustment switch and three-position midrange
adjustment switch fine-tune performance to the room
(VP89, VP87) • Exclusive FastMount® tabs hold speaker in
the mounting hole during installation, allowing the installer
to let go of the speaker to pick-up tools or other items
• Roto-Lock® mounting system simplifies installation
VP89
SPECIFICATIONS
PART#................. 92587
QUANTITY.......... PAIR
Tweeter:
1" (25mm) beryllium dome, ferrofluid-cooled, pivoting
4" (102mm) beryllium cone, rubber surround, pivoting
Midrange:
Woofer:8" (203mm) beryllium cone, rubber surround, extended
pole piece
Frequency Response:
30Hz – 20kHz ±3dB
Impedance:
6 ohms nominal; 4 ohms minimum
5 watts minimum; 175 watts maximum
Power Handling:
Sensitivity:
91dB SPL (2.83V/1 meter)
Perforated steel
Grille:
Adjustments:Tweeter and midrange level (±3dB)
Dimensions (W x H x D):
10" x 16" x 37∕ 8" (254mm x 406mm x 98mm)
Cut-Out Dims.(W x H):
8½" x 14½" (216mm x 368mm)
Shipping Weight:
22 lbs (10kg) pair
VP87
SPECIFICATIONS
Tweeter:
Midrange:
Woofer:
PART#................. 92586
QUANTITY.......... PAIR
20
1" (25mm) aluminum dome, ferrofluid-cooled, pivoting
4" (102mm) coated carbon fiber cone, rubber surround, pivoting
8" (203mm) coated carbon fiber cone, rubber surround,
extended pole piece
Frequency Response:
31Hz – 20kHz ±3dB
Impedance:
6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 165 watts maximum
Sensitivity:
91dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Adjustments:Tweeter and midrange level (±3dB)
Dimensions (W x H x D):
10" x 16" x 37∕ 8" (254mm x 406mm x 98mm)
Cut-Out Dims. (W x H):
8½" x 14½" (216mm x 368mm)
Shipping Weight:
22 lbs (10kg) pair
Visual Performance series large Rectangle speakers
VP85
SPECIFICATIONS
Tweeter:
Midrange: Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight: 1" (25mm) silk dome, ferrofluid-cooled, pivoting
4" (102mm) carbon fiber cone, rubber surround,
pivoting
8" (203mm) carbon fiber cone, rubber surround
36Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 140 watts maximum
91dB SPL (2.83V/1 meter)
Perforated steel
10" x 16" x 37∕ 8" (254mm x 406mm x 98mm)
8½" x 14½" (216mm x 368mm)
20 lbs (9.0kg) pair
PART#................. 92585
QUANTITY.......... PAIR
VP83
SPECIFICATIONS
1" (25mm) silk dome, ferrofluid-cooled, pivoting
4" (102mm) polypropylene cone, rubber surround, pivoting
8" (203mm) polypropylene cone, rubber surround, pivoting
38Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 125 watts maximum
90dB SPL (2.83V/1 meter)
Perforated steel
10" x 16" x 37∕ 8" (254mm x 406mm x 98mm)
8½" x 14½" (216mm x 368mm)
20 lbs (9kg) pair
PART#................. 92862
QUANTITY.......... PAIR
VP81
SPECIFICATIONS
Tweeter:
Midrange: Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight: ¾" (19mm) silk dome, ferrofluid-cooled, pivoting
4" (102mm) polypropylene cone, rubber surround, pivoting
8" (203mm) polypropylene cone, rubber surround
45Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 100 watts maximum
89dB SPL (2.83V/1 meter)
Perforated steel
10" x 16" x 37∕ 8" (254mm x 406mm x 98mm)
8½" x 14½" (216mm x 368mm)
20 lbs (9kg) pair
V I S U AL P E R FO R M ANCE SE R I ES
Tweeter:
Midrange: Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight: PART#................. 92859
QUANTITY.......... PAIR
Visual Performance series Large rectangle speaker Accessories
Visual Performance large rectangle grille Large rectangle Flex bracket Large rectangle wood acoustic enclosure Large rectangle retrofit enclosure
Large rectangle staple template Large rectangle coverplate Vapor barrier
Part #
Page #
92614 92246 91708 92242 901067 92244
91703
109 1 pair $32.00
119 5 pair
$66.50
124 each$110.00
127 1 pair
$55.00
120 5 pair
$55.50
118 1 pair
$34.50
129
12 pair
$225.00
QTY Dealer Cost
21
Visual Performance series large Round speakers
visual performance large round speaker
SPECIAL Features
One-piece, trimless, low-profile
magnetic grille • Simplified one-step painting process
• Fully-pivoting woofer assembly and pivoting Sonic Eye
direct sound at listeners for life-like stereo performance,
even when placement options are limited • Advanced
driver materials for extremely accurate musical performance
• Eight-inch diameter woofers deliver deep, powerful bass
• Graphite-Reinforced ABS (GRABS) woofer basket
reduces resonances • Three-position tweeter adjustment
switch and three-position midrange adjustment switch
fine-tunes performance for the room (VP89R, VP87R)
• Exclusive FastMount tabs hold speaker in the mounting
hole during installation, allowing the installer to let go of the
speaker to pick-up tools or other items • Roto-Lock mounting
system simplifies installation
VP89R
SPECIFICATIONS
PART#................. 92527
QUANTITY.......... PAIR
Tweeter:
1" (25mm) beryllium dome, ferrofluid-cooled, pivoting
4" (102mm) beryllium cone, rubber surround, pivoting
Midrange:
Woofer:
8" (203mm) beryllium cone, rubber surround, pivoting
Frequency Response:
30Hz – 20kHz ±3dB
Impedance:
6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 175 watts maximum
Sensitivity:
91dB SPL (2.83V/1 meter)
Perforated steel
Grille:
Adjustments:Tweeter and midrange level (±3dB)
Dimensions (Dia. x D): 115∕ 8" x 5 7∕ 8" (295mm x 149mm)
Cut-Out Diameter: 101∕ 8" (257mm)
Shipping Weight: 22 lbs (10kg) pair
VP87R
SPECIFICATIONS
PART#................. 92526
QUANTITY.......... PAIR
Tweeter:
1" (25mm) aluminum dome, ferrofluid-cooled, pivoting
Midrange:
4" (102mm) coated carbon fiber cone, rubber surround, pivoting
Woofer:
8" (203mm) coated carbon fiber cone, rubber surround, pivoting
Frequency Response:
31Hz – 20kHz ±3dB
Impedance:
6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 165 watts maximum
Sensitivity:
91dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Adjustments:Tweeter and midrange level (±3dB)
Dimensions (Dia. x D): 115∕ 8" x 5 7∕ 8" (295mm x 149mm)
Cut-Out Diameter: 101∕ 8" (257mm)
Shipping Weight: 22 lbs (10kg) pair
VP85R
SPECIFICATIONS
PART#................. 92525
QUANTITY.......... PAIR
22
Tweeter:
Midrange: Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (Dia. x D): Cut-Out Diameter: Shipping Weight: 1" (25mm) silk dome, ferrofluid-cooled, pivoting
4" (102mm) carbon fiber cone, rubber surround, pivoting
8" (203mm) carbon fiber cone, rubber surround, pivoting
36Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 140 watts maximum
91dB SPL (2.83V/1 meter)
Perforated steel
115∕ 8" x 5 7∕ 8" (295mm x 149mm)
101∕ 8" (257mm)
20 lbs (9kg) pair
R
SONANCE
®
SERIES
Visual Performance series large round speakers
vp83r
SPECIFICATIONS
Tweeter:
Midrange:
Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (Dia. x D): Cut-Out Diameter: Shipping Weight: 1" (25mm) silk dome, ferrofluid-cooled, pivoting
4" (102mm) polypropylene cone, rubber surround, pivoting
8" (203mm) polypropylene cone, rubber surround, pivoting
38Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 125 watts maximum
90dB SPL (2.83V/1 meter)
Perforated steel
115∕ 8" x 57∕ 8" (295mm x 149mm)
101∕ 8" (257mm)
20 lbs (9.0kg) pair
PART#................. 92863
QUANTITY.......... pair
vp81r
SPECIFICATIONS
¾" (19mm) silk dome, ferrofluid-cooled, pivoting
4" (102mm) polypropylene cone, rubber surround, pivoting
8" (203mm) polypropylene cone, rubber surround, pivoting
45Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 100 watts maximum
89dB SPL (2.83V/1 meter)
Perforated steel
115∕ 8" x 57∕ 8" (295mm x 149mm)
101∕ 8" (257mm)
20 lbs (9kg) pair
PART#................. 92860
QUANTITY.......... pair
Visual Performance series large round speaker accessories
Part #
Page#
QTY
Visual Performance large round grille
Large round wood acoustic enclosure
Large round retrofit enclosure
Large round Flex bracket
Large round coverplate
Fire-rated (listed) large round backcan*
(listed) deep backcan
92615
91900
92243
92247
92245
91908
92808
109
124
127
119
118
128
128
1 pair $32.00
each$110.00
1 pair
$55.00
5 pair
$66.50
1 pair
$34.50
each
$40.00 Fire-rated
each$50.00
Dealer Cost
V I S U AL P E R FO R M ANCE SE R I ES
Tweeter:
Midrange:
Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (Dia. x D): Cut-Out Diameter: Shipping Weight: * While supplies last
23
Visual Performance series large Square speakers
VP89S
SPECIFICATIONS
PART#................. 92864
QUANTITY.......... pair
Tweeter:
Midrange: Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (W x H x D): Cut-Out Dims (W x H): Shipping Weight: 1" (25mm) beryllium dome, ferrofluid-cooled, pivoting
4" (102mm) beryllium cone, rubber surround, pivoting
8" (203mm) beryllium cone, rubber surround, pivoting
30Hz – 20kHz ±3dB
6 ohms nominal; 4 ohms minimum
5 watts minimum; 175 watts maximum
91dB SPL (2.83V/1 meter)
Perforated steel
11¾" x 11¾" x 5 7∕ 8" (299mm x 299mm x 149mm)
10¼" x 10¼" (260mm x 260mm)
22 lbs (10.0kg) pair
VP85S
SPECIFICATIONS
PART#................. 92555
QUANTITY.......... PAIR
Tweeter:
Midrange:
Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (W x H x D): Cut-Out Dims. (W x H): Shipping Weight: 1" (25mm) silk dome, ferrofluid-cooled, pivoting
4" (102mm) carbon fiber cone with a rubber surround, pivoting
8" (203mm) long-throw carbon fiber cone, rubber surround
36Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 140 watts maximum
91dB SPL (2.83V/1 meter)
Perforated steel
11¾" x 11¾" x 57∕ 8" (299mm x 299mm x 149mm)
10¼" x 10¼" (260mm x 260mm)
20 lbs (9.0kg) pair
VP81S
SPECIFICATIONS
PART#................. 92861
QUANTITY.......... pair
Tweeter:
Midrange:
Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (W x H x D): Cut-Out Dims. (W x H): Shipping Weight: ¾" (19mm) silk dome, ferrofluid-cooled, pivoting
4" (102mm) polypropylene cone, rubber surround, pivoting
8" (203mm) polypropylene cone, rubber surround, pivoting
45Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 100 watts maximum
89dB SPL (2.83V/1 meter)
Perforated steel
11¾" x 11¾" x 57∕ 8" (299mm x 299mm x 149mm)
10¼" x 10¼" (260mm x 260mm)
20 lbs (9.0kg) pair
Visual Performance series large square speaker accessories
24
Part # Page #
QTY
Visual Performance Large square grille
Large square wood acoustic enclosure
Large square retrofit enclosure
Fire-rated (listed) deep backcan
Large square Flex bracket
92616
92481
92243
92808
92801
109
124
127
128
119
1 pair
$32.00
each$135.00
1 pair
$55.00
each$50.00
5 pair
$66.50
Dealer Cost
VISUAL PERFORMANCE SERIES large single stereo SPEAKERS
vp85r sst - Single Stereo Technology
SPECIFICATIONS
Tweeter:Two 1" (25mm) silk domes, ferrofluid-cooled
Midrange:Two 3" (76mm) carbon fiber cones, rubber surrounds
Woofer: 8" (203mm) carbon fiber cone, rubber surround, pivoting
Frequency Response: 36Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 91dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (Dia. x D): 115∕ 8" x 57∕ 8" (295mm x 149mm)
Cut-Out Diameter: 101∕ 8" (257mm)
Shipping Weight: 10 lbs (4.5kg) each
For accessories, see "Visual Performance series large round speaker accessories" on page 23.
PART#................. 92865
QUANTITY.......... EACH
vp85s sst - Single Stereo Technology
SPECIFICATIONS
PART#................. 92866
QUANTITY.......... EACH
VISUAL PERFORMANCE SERIES large home theater SPEAKERS
vp85r sur
SPECIFICATIONS
Tweeter:Two 1" (25mm) silk domes, ferrofluid-cooled
Midrange:Two 3" (76mm) carbon fiber cones, rubber surrounds
Woofer: 8" (203mm) long-throw carbon fiber cone, rubber surround,
pivoting
Frequency Response: 36Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 91dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (Dia. x D): 115∕ 8" x 57∕ 8" (295mm x 149mm)
Cut-Out Diameter: 101∕ 8" (257mm)
Shipping Weight: 20 lbs (9.0kg) pair
For accessories, see "Visual Performance series large round speaker accessories" on page 23.
V I S U AL P E R FO R M ANCE SE R I ES
Tweeter:Two 1" (25mm) silk domes, ferrofluid-cooled
Midrange:Two 3" (76mm) carbon fiber cones, rubber surrounds
Woofer: 8" (203mm) carbon fiber cone, rubber surround, pivoting
Frequency Response: 36Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 91dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 113∕ 4" x 113∕ 4" x 57∕ 8" (299mm x 299mm x 149mm)
Cut-Out Dims (W x H): 101∕ 4" x 101∕ 4" (257mm x 257mm)
Shipping Weight: 10 lbs (4.5kg) each
For accessories, see "Visual Performance series large square speaker accessories" on page 24.
PART#................. 92867
QUANTITY.......... pair
25
V i s u a l P e r f o rm a n c e S e ri e s M e d ium Sp e a k e r s
Visual Performance SERIES Medium speakers Our most popular speakers just got better. Low-profile, nearly trimless
magnetic grilles give Visual Performance Medium speakers a sleek modern look that makes traditional flanged in-wall and
in-ceiling speakers look dated. Visual Performance Medium speakers represent the perfect balance of acoustic and visual
performance. Available in rectangle, round, and square shapes and in three performance levels to suit any installation
requirement.
VISUAL PERFORMANCE SERIES Medium rectangle SPEAKERS
visual performance medium rectangle speaker
SPECIAL FEATURES One-piece, nearly trimless, low-profile
magnetic grille • Simplified one-step grille painting process
• Small footprint increases installation options • Advanced
woofer cone materials for robust bass • Tweeter acoustic back
chamber widens and smoothes high-frequency performance
• Pivoting tweeters direct sound at listeners • Low-resonance
¾" MDF baffles and cast aluminum woofer baskets (VP69,
VP67) • Optional retrofit molded enclosure reduces sound
spillover into adjacent spaces • Roto-Lock mounting system
simplifies installation • Exclusive FastMount tabs hold speaker
in the mounting hole during installation, allowing the installer
to let go of the speaker to pick-up tools or other items
VP69
SPECIFICATIONS
PART#................. 92577
QUANTITY.......... PAIR
Tweeter:1" (25mm) beryllium dome, ferrofluid-cooled, pivoting, in
acoustic back chamber
Woofer:61∕ 2" (165mm) beryllium cone with a rubber surround,
extended pole piece
Frequency Response:
40Hz – 20kHz ±3dB
Impedance:6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 150 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Adjustments:Tweeter level (±3dB)
Dimensions (W x H x D):
8 3∕ 8" x 12¼" x 3½" (213mm x 311mm x 89mm)
Cut-Out Dims. (W x H):
6 15∕ 16" x 10¾" (176mm x 273mm)
Shipping Weight:
12 lbs (5.45kg) pair
VP67
SPECIFICATIONS
PART#................. 92576
QUANTITY.......... PAIR
Tweeter:1" (25mm) aluminum dome, ferrofluid-cooled, pivoting, in
acoustic back chamber
Woofer:61∕ 2" (165mm) coated carbon fiber cone with a rubber
surround, extended pole piece
Frequency Response:
43Hz – 20kHz ± 3dB
Impedance:6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 140 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Adjustments:Tweeter level (±3dB)
Dimensions (W x H x D):
8 3∕ 8" x 12¼" x 3½" (213mm x 311mm x 89mm)
Cut-Out Dims. (W x H):
6 15∕ 16" x 10¾" (176mm x 273mm)
Shipping Weight:
11 lbs (5.0kg) pair
VP65
SPECIFICATIONS
PART#................. 92575
QUANTITY.......... PAIR
26
Tweeter:1" (25mm) silk dome, ferrofluid-cooled, pivoting, in acoustic
back chamber
Woofer:61∕ 2" (165mm) carbon fiber cone with a rubber surround
Frequency Response:
44Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 130 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Dimensions (W x H x D):
8 3∕ 8" x 12¼" x 3 3∕ 8" (213mm x 311mm x 86mm)
Cut-Out Dims. (W x H):
6 15∕ 16" x 10¾" (176mm x 273mm)
Shipping Weight:
10 lbs (4.5kg) pair
VISUAL PERFORMANCE SERIES Medium rectangle SPEAKERS
VP63
SPECIFICATIONS
Tweeter:
Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight: 1" (25mm) silk dome, ferrofluid-cooled, pivoting, in acoustic back chamber
6½" (165mm) polypropylene cone, rubber surround
45Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 125 watts maximum
89dB SPL (2.83V/1 meter)
Perforated steel
83∕ 8" x 12¼" x 33∕ 8" (213mm x 311mm x 86mm)
615∕ 16" x 10¾" (176mm x 273mm)
9 lbs (4.1kg) pair
PART#................. 92852
QUANTITY.......... PAIR
VP61
SPECIFICATIONS
¾" (19mm) silk dome, ferrofluid-cooled
6½" (165mm) polypropylene cone, rubber surround
50Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 100 watts maximum
88dB SPL (2.83V/1 meter)
Perforated steel
83∕ 8" x 12¼" x 33∕ 8" (213mm x 311mm x 86mm)
615∕ 16" x 10¾" (176mm x 273mm)
9 lbs (4.1kg) pair
PART#................. 92848
QUANTITY.......... PAIR
Visual Performance medium rectangle speaker accessories
Part # Page #
QTY
Visual Performance medium rectangle grille
Visual Performance Extreme rectangle grille
Medium rectangle Flex bracket
Medium rectangle staple template
Medium rectangle wood acoustic enclosure
Medium rectangle retrofit enclosure
Fire-rated (listed) shallow backcan
Medium rectangle masonry bracket
Medium rectangle coverplate
Vapor barrier
92611
92812
92336
900651
91687*
92342*
92807*
92066 92334
91703
109
110
119
120
124
127
128
120
118
129
1 pair
$32.00
each$60.00
5 pair
$66.50
5 pair
$36.50
each$90.00
1 pair
$22.00
each$50.00
1 pair
$22.00
1 pair
$17.50
12 pair
$225.00
Dealer Cost
V I S U AL P E R FO R M ANCE SE R I ES
Tweeter:
Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight: * Not for use with VP65 TL
27
VISUAL PERFORMANCE SERIES Medium round SPEAKERs
visual performance medium round speaker
SPECIAL FEATURES One-piece, nearly trimless, low-profile
magnetic grille • Simplified one-step grille painting process
• Small footprint increases installation options • Advanced
woofer cone materials for robust bass • Tweeter acoustic back
chamber widens and smoothes high-frequency performance
• Pivoting woofers and pivoting tweeters direct sound
at listeners for life-like stereo performance, even when
placement options are limited • Optional retrofit molded
enclosure reduces sound spillover into adjacent spaces •
Roto-Lock mounting system simplifies installation • Exclusive
FastMount tabs hold speaker in the mounting hole during
installation, allowing the installer to let go of the speaker to
pick-up tools or other items
VP69R
SPECIFICATIONS
PART#................. 92517
QUANTITY.......... PAIR
Tweeter:1" (25mm) beryllium dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer:61∕ 2" (165mm) beryllium cone with a rubber surround, pivoting
Frequency Response:
40Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 150 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Adjustments:Tweeter level (±3dB)
Dimensions (Dia. x D):
93∕4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
12 lbs (5.45 kg) pair
VP67R
SPECIFICATIONS
PART#................. 92516
QUANTITY.......... PAIR
Tweeter:1" (25mm) aluminum dome, ferrofluid-cooled, pivoting, in acoustic back chamber
Woofer:6½" (165mm) coated carbon fiber cone with a rubber
surround, pivoting
Frequency Response:
43Hz – 20kHz ± 3dB
Impedance:6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 140 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Adjustments:Tweeter level (±3dB)
Dimensions (Dia. x D):
93∕4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
11 lbs (5.0kg) pair
VP65R
SPECIFICATIONS
PART#................. 92515
QUANTITY.......... PAIR
28
Tweeter:1" (25mm) silk dome, ferrofluid-cooled, pivoting, in acoustic
back chamber
Woofer:61∕ 2" (165mm) carbon fiber cone with a rubber surround,
pivoting
Frequency Response:
44Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 130 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Adjustments:Tweeter level ±3dB
Dimensions (Dia. x D):
93∕4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
10 lbs (4.5kg) pair
VISUAL PERFORMANCE SERIES Medium round SPEAKERS
VP63r
SPECIFICATIONS
Tweeter:1" (25mm) silk dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer:61∕ 2" (165mm) polypropylene cone, rubber surround, pivoting
Frequency Response:
45Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
5 watts minimum; 125 watts maximum
Power Handling:
Sensitivity:
89dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Dimensions (Dia. x D):
93∕4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
9 lbs (4.1 kg) pair
PART#................. 92853
QUANTITY.......... PAIR
VP61r
SPECIFICATIONS
PART#................. 92849
QUANTITY.......... PAIR
Visual Performance medium round speaker accessories
Part #
Page #
QTY
Visual Performance medium round grille
Visual Performance Extreme round grille
Medium round Flex bracket
Medium round wood acoustic enclosure
Medium round retrofit enclosure
Medium round staple template
Fire-rated (listed) deep backcan
Medium round coverplate
92612
92813
92337
91688*
92343*
901049
92808*
92335
109
110
119
125
127
120
128
118
1 pair
$32.00
each$60.00
5 pair
$66.50
each$90.00
1 pair
$22.00
5 pair
$36.50
each$50.00
1 pair
$17.50
Dealer Cost
V I S U AL P E R FO R M ANCE SE R I ES
Tweeter:¾" (19mm) silk dome, ferrofluid-cooled
Woofer:61∕ 2" (165mm) polypropylene cone, rubber surround, pivoting
Frequency Response:
50Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 100 watts maximum
Sensitivity:
88dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Dimensions (Dia. x D):
93∕4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
9 lbs (4.1 kg) pair
* Not for use with VP65R TL
29
VISUAL PERFORMANCE SERIES medium square SPEAKERs
visual performance medium square speaker
SPECIAL FEATURES One-piece, nearly trimless, low-profile
magnetic grille with simplified one-step painting process
• Small footprint increases installation options • Tweeter
acoustic back chamber widens and smoothes high-frequency
performance • Pivoting woofers and pivoting tweeters direct
sound at listeners for life-like stereo performance, even when
placement options are limited • Optional retrofit molded
enclosure reduces sound spillover into adjacent spaces •
Roto-Lock mounting system simplifies installation • Exclusive
FastMount tabs hold speaker in the mounting hole during
installation, allowing the installer to let go of the speaker to
pick-up tools or other items
VP69S
SPECIFICATIONS
Tweeter: PART#................. 92854
QUANTITY.......... PAIR
1" (25mm) beryllium dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
6½" (165mm) beryllium cone with a rubber surround,
Woofer: pivoting
Frequency Response: 40Hz – 20kHz ±3dB
Adjustments:Tweeter level (±3dB)
6 ohms nominal; 4 ohms minimum
Impedance: Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Perforated steel
Grille: Dimensions (W x H x D): 9 7/8" x 9 7/8” x 4¾" (251mm x 251mm x 121mm)
Cut-Out Dims. (W x H): 8¼" x 8¼" (210mm x 210mm)
Shipping Weight: 9 lbs (4.1kg) pair
VP65S
SPECIFICATIONS
Tweeter: Woofer: PART#................. 92545
QUANTITY.......... PAIR
Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (W x H x D): Cut-Out Dims. (W x H): Shipping Weight: 1" (25mm) silk dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
6½" (165mm) carbon fiber cone with a rubber surround,
pivoting
44Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 130 watts maximum
90dB SPL (2.83V/1 meter)
Perforated steel
9 7/8" x 9 7/8” x 4¾" (251mm x 251mm x 121mm)
8¼" x 8¼" (210mm x 210mm)
10 lbs (4.5kg) pair
VP61S
SPECIFICATIONS
Tweeter: Woofer: PART#................. 92850
QUANTITY.......... PAIR
30
Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (W x H x D): Cut-Out Dims. (W x H): Shipping Weight: ¾" (19mm) silk dome, ferrofluid-cooled
6½" (165mm) polypropylene cone with a rubber surround,
pivoting
50Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 100 watts maximum
88dB SPL (2.83V/1 meter)
Perforated steel
9 7/8" x 9 7/8” x 4¾" (251mm x 251mm x 121mm)
8¼" x 8¼" (210mm x 210mm)
9 lbs (4.1kg) pair
VISUAL PERFORMANCE SERIES Medium square SPEAKERS
Visual Performance medium square speaker accessories
Part # Page #
QTY
Visual Performance medium square grille Visual Performance Extreme square grille
Medium square Flex bracket Medium square wood acoustic enclosure Medium square retrofit enclosure
Fire-rated (listed) deep backcan 92613 92814
92344
92474*
92243*
92808* 109
110
119
125
127
128
1 pair
$32.00
1 pair
$45.00
5 pair
$66.50
each$130.00
1 pair
$22.00
each$50.00
Dealer Cost
*Not for use with VP65S TL
VISUAL PERFORMANCE SERIES Medium single stereo SPEAKERS
VP65 SST — single stereo technology
SPECIFICATIONS
PART#................. 92734
QUANTITY.......... EACH
VP65r SST — single stereo technology
SPECIFICATIONS
Tweeter: Two 1" (25mm) silk domes, ferrofluid-cooled, pivoting, in
acoustic back chamber
Woofer: 6½" (165mm) carbon fiber cone with a rubber surround
Frequency Response: 44Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (Dia. x D): 9 3/4" x 43/4" (248mm x 121mm)
Cut-Out Diameter: 8¼" (210mm)
Shipping Weight: 5 lbs (2.3kg) each
For accessories, see "Visual Performance medium round speaker accessories" on page 29.
V I S U AL P E R FO R M ANCE SE R I ES
Tweeter: Two 1" (25mm) silk domes, ferrofluid-cooled, pivoting, in acoustic back chamber
Woofer: 6½" (165mm) carbon fiber cone, with a rubber surround
Frequency Response: 44Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 83/8" x 12¼" x 39/16" (213mm x 311mm x 91mm)
Cut-Out Dims. (W x H): 615/16" x 103/4" (176mm x 273mm)
Shipping Weight: 6 lbs (2.7kg) each
For accessories, see "Visual Performance medium rectangle speaker accessories" on page 27.
PART#................. 92730
QUANTITY.......... EACH
VP65S SST — single stereo technology
SPECIFICATIONS
Tweeter: Two 1" (25mm) silk domes, ferrofluid-cooled, pivoting, in acoustic back chamber
Woofer: 6½" (165mm) carbon fiber cone with a rubber surround
Frequency Response: 44Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 9 7/8" x 9 7/8” x 4¾" (251mm x 251mm x 121mm)
Cut-Out Dims. (W x H): 8¼" x 8¼" (210mm x 210mm)
Shipping Weight: 10 lbs (4.5kg) each
For accessories, see "Visual Performance medium square speaker accessories" on page 31.
PART#................. 92731
QUANTITY.......... EACH
31
31
VISUAL PERFORMANCE SERIES medium single stereo SPEAKERs
VP61r SST — single stereo technology
SPECIFICATIONS
PART#................. 92851
QUANTITY.......... EACH
Tweeter: Two ¾" (19mm) silk domes, ferrofluid-cooled
Woofer: 6½" (165mm) polypropylene cone, dual voice coil,
with a rubber surround, pivoting
Frequency Response: 50Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 100 watts maximum
Sensitivity: 88dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (Dia. x D): 9¾" x 4¾" (248mm x 121mm)
Cut-Out Diameter: 8¼" (210mm)
Shipping Weight: 4.5 lbs (2.0kg) each
For accessories, see "Visual Performance medium round speaker accessories" on page 29.
VISUAL PERFORMANCE SERIES medium home theater SPEAKERs
visual performance medium home theater speakers
SPECIAL FEATURES The VP67 LCR makes an ideal centerchannel counterpart for any Visual Performance series left
and right channel speaker pair in small or medium-sized
home theater systems.
SUR speakers provide a precisely mounted tweeter array
creating a diffuse sound field ideal for in-ceiling surround
channel applications.
VP67 lcR — surround
SPECIFICATIONS
PART#................. 92724
QUANTITY.......... EACH
Tweeter:
1" (25mm) aluminum dome, ferrofluid-cooled
Woofer:Two 6½" (165mm) coated carbon fiber cones with rubber
surrounds, extended pole pieces
Frequency Response:
43Hz – 20kHz ±3dB
Impedance:6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 140 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Adjustments:
±3dB tweeter level
Perforated steel
Grille:
161∕8" x 83∕8" x 39∕ 16" (410mm x 213mm x 91mm)
Grille Dims. (W x H x D):
Cut-Out Dims. (W x H):
14½" x 67∕8" (368mm x 175mm)
Shipping Weight:
8 lbs (3.6kg) each
Visual Performance medium LCR speaker accessories
Part #
Page #
Visual Performance medium LCR grille
Medium LCR Flex bracket
Medium LCR retrofit enclosure
92806
92475
92836
109 each$32.00
119 each$14.00
127 each$17.50
QTY
Dealer Cost
VP65r SUR — surround
SPECIFICATIONS
PART#................. 92732
QUANTITY.......... PAIR
32
Tweeter:Two 1" (25mm) silk domes, ferrofluid-cooled, in acoustic
back chamber
Woofer:6½" (165mm) carbon fiber cone with a rubber surround
Frequency Response:
44Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 130 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Dimensions (Dia. x D):
93∕4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
5 lbs (2.3kg) pair
For accessories, see "Visual Performance medium round speaker accessories" on page 29.
VISUAL PERFORMANCE SERIES medium home theater SPEAKERs
VP65s SUR — surround
SPECIFICATIONS
Tweeter:Two 1" (25mm) silk domes, ferrofluid-cooled, pivoting, in acoustic back chamber
Woofer:6½" (165mm) carbon fiber cone with a rubber surround
Frequency Response:
44Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 130 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Perforated steel
Grille:
Dimensions (W x H x D):
97∕8" x 97∕ 8" x 4¾" (251mm x 251mm x 121mm)
Cut-Out Dims. (W x H):
8¼" x 8¼" (210mm x 210mm)
Shipping Weight:
10 lbs (4.5kg) pair
For accessories, see "Visual Performance medium square speaker accessories" on page 31.
PART#................. 92733
QUANTITY.......... PAIR
V I S U AL P E R FO R M ANCE SE R I ES
33
33
VISUAL PERFORMANCE SERIES medium thinline SPEAKERs
visual performance medium thinline speakers
SPECIAL FEATURES Visual Performance Medium speakers are
available in three shapes (rectangular, square and round), and
each shape is available in three different audio performance
levels, so the designer and installer can select the shape that
best suits the architectural space while providing the level of
sound quality desired by the client. The VP65 is also available
in a shallow depth model in rectangle and round shapes with
2 1/2" and 3 1/32" (64mm and 77mm) depths that allow
installation in areas that will not accommodate conventional
speakers.
VP65-series speakers feature carbon fiber cone woofers and
silk dome tweeters for high-quality sound. Pivoting drivers
direct the sound at listeners for excellent stereo performance,
even if the speakers are mounted in less than ideal locations.
Visual Performance Series Medium speakers can be retrofitted
into mounting holes for Sonance Original Series Medium
speakers without modification, making upgrades exceptionally
easy. Visual Performance Series Medium speakers can also be
used with accessories for Sonance Original Series Medium
speakers, such as Flex brackets, acoustic enclosures, retrofit
backboxes and fire-rated backcans.
VP65 TL — thinline
SPECIFICATIONS
PART#................. 92600
QUANTITY.......... PAIR
Tweeter: 1" (25mm) silk dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer: 6½" (165mm) carbon fiber cone with a rubber surround
Frequency Response: 44Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 83/8" x 121/4" x 21∕2" (213mm x 311mm x 64mm)
Cut-Out Dims. (W x H): 615/16" x 103/4" (176mm x 273mm)
Shipping Weight: 10 lbs (4.5kg) pair
For accessories, see "Visual Performance medium rectangle speaker accessories" on page 27.
VP65r TL — thinline
SPECIFICATIONS
PART#................. 92601
QUANTITY.......... PAIR
Tweeter: 1" (25mm) silk dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer: 6½" (165mm) carbon fiber cone with a rubber surround
Frequency Response: 44Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (Diam. x D):
9 3/4" x 31∕ 32" (248mm x 77mm)
Cut-Out Diameter: 8¼" (210mm)
Shipping Weight: 10 lbs (4.5kg) pair
For accessories, see "Visual Performance medium round speaker accessories" on page 29.
VP65S TL — thinline
SPECIFICATIONS
PART#................. 92602
QUANTITY.......... PAIR
34
Tweeter: 1" (25mm) silk dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer: 6½" (165mm) carbon fiber cone with a rubber surround
Frequency Response: 44Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 9 7/8" x 9 7/8” x 31∕32" (251mm x 251mm x 77mm)
Cut-Out Dims. (W x H): 8¼" x 8¼" (210mm x 210mm)
Shipping Weight: 10 lbs (4.5kg) pair
For accessories, see "Visual Performance medium square speaker accessories" on page 31.
VISUAL PERFORMANCE SERIES medium thinline SPEAKERs
VP65r sst tl — thinline
SPECIFICATIONS
Tweeter: Two 1" (25mm) silk domes, ferrofluid-cooled
6½" (165mm) carbon fiber cone, dual voice coil,
Woofer: with a rubber surround
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 135 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (Diam. x D): 9 3/4" x 31∕32" (248mm x 77mm)
Cut-Out Diameter: 81/4" (210mm)
Shipping Weight: 5 lbs (2.3kg) each
For accessories, see "Visual Performance medium round speaker accessories" on page 29.
PART#................. 92858
QUANTITY.......... EACH
VP63r TL — thinline
SPECIFICATIONS
PART#................. 92856
QUANTITY.......... PAIR
VP61r TL — thinline
SPECIFICATIONS
3/ " (19mm) silk dome, ferrofluid-cooled
Tweeter: 4
Woofer: 6½" (165mm) polypropylene cone with a rubber surround
Frequency Response: 50Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 100 watts maximum
Sensitivity: 88dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (Diam. x D): 9 3/4" x 31∕32" (248mm x 77mm)
Cut-Out Diameter: 81/4" (210mm)
Shipping Weight: 9 lbs (4.1kg) pair
For accessories, see "Visual Performance medium round speaker accessories" on page 29.
V I S U AL P E R FO R M ANCE SE R I ES
Tweeter: 1" (25mm) silk dome, ferrofluid-cooled
Woofer: 6½" (165mm) polypropylene cone with a rubber surround
Frequency Response: 45Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
Impedance: 5 watts minimum; 125 watts maximum
Power Handling: Sensitivity: 89dB SPL (2.83V/1 meter)
Perforated steel
Grille: Dimensions (Diam. x D): 9 3/4" x 31∕32" (248mm x 77mm)
Cut-Out Diameter: 8¼" (210mm)
Shipping Weight: 9 lbs (4.1kg) pair
For accessories, see "Visual Performance medium round speaker accessories" on page 29.
PART#................. 92855
QUANTITY.......... PAIR
VP61r sst TL — thinline
SPECIFICATIONS
Tweeter: Two 3/4" (19mm) silk domes, ferrofluid-cooled
Woofer: 6½" (165mm) polypropylene cone, with a rubber surround
and dual voice coil
Frequency Response: 50Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
5 watts minimum; 100 watts maximum
Power Handling: Sensitivity: 88dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (Diam. x D): 9 3/4" x 31∕32" (248mm x 77mm)
Cut-Out Diameter: 8¼" (210mm)
Shipping Weight: 4.5 lbs (2.0kg) each
For accessories, see "Visual Performance medium round speaker accessories" on page 29.
PART#................. 92857
QUANTITY.......... EACH
35
35
VISUAL PERFORMANCE SERIES medium extreme SPEAKERs
visual performance medium extreme speakers SPECIAL
FEATURES Extreme speakers are engineered for high-humidity
areas and are built to survive extreme temperatures - from
-30ºF up to +175ºF (34ºC up to +79ºC) - while maintaining
superior sound quality. Visual Performance Series Extreme
speakers are also shock resistant and can withstand the
pelting of the high seas and salty air, making them an
excellent choice for marine applications.
VP65 xt — extreme
SPECIFICATIONS
PART#................. 92751
QUANTITY.......... PAIR
Tweeter: 1" (25mm) polyurethane dome
Woofer: 6½" (165mm) injection-molded polypropylene/graphite cone,
with integral Santoprene™ surround
Frequency Response: 55Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 89dB SPL (2.83V/1 meter)
Grille: Poweder-coated stainless steel
Dimensions (W x H x D): 83/8" x 121/4" x 21∕2" (213mm x 311mm x 64mm)
Cut-Out Dims. (W x H): 615/16" x 103/4" (176mm x 273mm)
Shipping Weight: 12 lbs (5.4kg) pair
For accessories, see "Visual Performance medium rectangle speaker accessories" on page 27.
VP65r xt — extreme
SPECIFICATIONS
Tweeter: Woofer: PART#................. 92752
QUANTITY.......... PAIR
1" (25mm) polyurethane dome
6½" (165mm) injection-molded polypropylene/graphite cone,
with integral Santoprene™ surround
Frequency Response: 55Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 89dB SPL (2.83V/1 meter)
Grille: Powder-coated stainless steel
Dimensions (Diam. x D): 9 3/4" x 31∕2" (248mm x 89mm)
Cut-Out Diameter: 8¼" (210mm)
Shipping Weight: 12 lbs (5.4kg) pair
For accessories, see "Visual Performance medium round speaker accessories" on page 29.
VP65s xt — extreme
SPECIFICATIONS
Tweeter: Woofer: PART#................. 92835
QUANTITY.......... PAIR
1" (25mm) polyurethane dome
6½" (165mm) injection-molded polypropylene/graphite cone,
with integral Santoprene™ surround
Frequency Response: 55Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 89dB SPL (2.83V/1 meter)
Grille: Powder-coated stainless steel
Dimensions (W x H x D): 9 7/8" x 9 7/8” x 31∕ 2" (251mm x 251mm x 89mm)
Cut-Out Dims. (W x H): 8¼" x 8¼" (210mm x 210mm)
Shipping Weight: 12 lbs (5.4kg) pair
For accessories, see "Visual Performance medium square speaker accessories" on page 31.
VP65r sst xt — extreme Single Stereo Technology
SPECIFICATIONS
PART#................. 92753
QUANTITY.......... EACH
36
Tweeter: Two 1" (25mm) polyurethane domes
Woofer: 6½" (165mm) injection-molded polypropylene/graphite cone,
with integral Santoprene™ surround
Frequency Response: 55Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 89dB SPL (2.83V/1 meter)
Grille: Powder-coated stainless steel
Dimensions (Diam. x D): 9 3/4" x 53∕16" (248mm x 132mm)
Cut-Out Diameter: 8¼" (210mm)
Shipping Weight: 4.5 lbs (2.1kg) each
For accessories, see "Visual Performance medium round speaker accessories" on page 29.
VISUAL PERFORMANCE SERIES small rectangle SPEAKERs
visual performance small rectangle speaker
SPECIAL FEATURES One-piece, nearly trimless, low-profile
magnetic grille • Simplified one-step grille painting process
• Very small footprint dramatically expands installation
options • Carbon fiber cone woofer delivers robust bass
• Pivoting tweeter directs sound at listeners • Optional
retrofit molded enclosure reduces sound spillover into
adjacent spaces • Roto-Lock mounting system simplifies
installation • Exclusive FastMount tabs hold speaker
in the mounting hole during installation, allowing the
installer to let go of the speaker to pick-up tools or other
items
VP49
SPECIFICATIONS
Tweeter:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille:
Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight:
1" (25mm) beryllium dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
4½" (114mm) beryllium cone with a rubber surround
50Hz - 20kHz ±3dB
6 ohms nominal; 4 ohms minimum
5 watts minimum; 100 watts maximum
90dB SPL (2.83V/1 meter)
Perforated steel
5 9∕ 16" x 8 7∕ 8" x 3" (142mm x 225mm x 76mm)
4 5∕8" x 8" (117mm x 203mm)
6 lbs (2.8kg) pair
PART#................. 92843
QUANTITY.......... PAIR
SPECIFICATIONS
Tweeter:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille:
Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight:
1" (25mm) silk dome, pivoting
4½" (114mm) carbon fiber cone with a rubber surround
58Hz - 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 70 watts maximum
90dB SPL (2.83V/1 meter)
Perforated steel
5 9∕ 16" x 8 7∕ 8" x 3" (142mm x 225mm x 76mm)
4 5∕8" x 8" (117mm x 203mm)
6 lbs (2.8kg) pair
PART#................. 92565
QUANTITY.......... PAIR
VP41
SPECIFICATIONS
Tweeter:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille:
Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight:
V I S U AL P E R FO R M ANCE SE R I ES
VP45
3
∕ 4" (19mm) silk dome
4½" (114mm) polypropylene cone with a rubber surround
70Hz - 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 50 watts maximum
89dB SPL (2.83V/1 meter)
Perforated steel
5 9∕ 16" x 8 7∕ 8" x 3" (142mm x 225mm x 76mm)
4 5∕8" x 8" (117mm x 203mm)
6 lbs (2.8kg) pair
PART#................. 92840
QUANTITY.......... PAIR
Visual Performance small rectangle speaker ACCESSORIES
Part #
Page #
QTY
Visual Performance small rectangle grille
Small rectangle Flex bracket
Small rectangle retrofit enclosure
Small rectangle masonry bracket
Fire-rated (listed) shallow backcan
Vapor barrier
92608
92470
92442
92067
92807
91703
109
119
127
120
128
129
1 pair
$32.00
5 pair
$66.50
1 pair
$25.00
1 pair
$15.00
each$50.00
12 pair
$225.00
Dealer Cost
37
37
VISUAL PERFORMANCE SERIES small round SPEAKERs
molded enclosure reduces sound spillover into adjacent
spaces • Roto-Lock mounting system simplifies installation
• Exclusive FastMount tabs hold speaker in the mounting
hole during installation, allowing the installer to let go of the
speaker to pick-up tools or other items
visual performance small round speaker
SPECIAL FEATURES One-piece, nearly trimless, low-profile
magnetic grille • Simplified one-step grille painting process
• Very small footprint dramatically expands installation
options • Carbon fiber cone woofer delivers robust bass
• Pivoting tweeter directs sound at listeners • Optional retrofit
VP49R
SPECIFICATIONS
Tweeter:
PART#................. 92844
QUANTITY.......... PAIR
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille:
Dimensions (Dia x D):
Cut-Out Diameter:
Shipping Weight:
1" (25mm) beryllium dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
4½" (114mm) beryllium cone with a rubber surround
50Hz – 20kHz ±3dB
6 ohms nominal; 4 ohms minimum
5 watts minimum; 100 watts maximum
90dB SPL (2.83V/1 meter)
Perforated steel
6 7∕ 8" x 3½" (175mm x 89mm)
5 7∕ 8" (149mm)
6 lbs (2.8kg) pair
VP45R
SPECIFICATIONS
PART#................. 92505
QUANTITY.......... PAIR
Tweeter:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille:
Dimensions (Dia x D):
Cut-Out Diameter:
Shipping Weight:
1" (25mm) silk dome, pivoting
4½" (114mm) carbon fiber cone with a rubber surround
58Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 70 watts maximum
90dB SPL (2.83V/1 meter)
Perforated steel
6 7∕ 8" x 3½" (175mm x 89mm)
5 7∕ 8" (149mm)
6 lbs (2.8kg) pair
VP41R
SPECIFICATIONS
PART#................. 92841
QUANTITY.......... PAIR
Tweeter:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille:
Dimensions (Dia x D):
Cut-Out Diameter:
Shipping Weight:
3
∕ 4" (19mm) silk dome
4½" (114mm) polypropylene cone with a rubber surround
70Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 50 watts maximum
89dB SPL (2.83V/1 meter)
Perforated steel
6 7∕ 8" x 3½" (175mm x 89mm)
5 7∕ 8" (149mm)
6 lbs (2.8kg) pair
Visual Performance small round speaker ACCESSORIES
38
Part #
Page #
QTY
Visual Performance small round grille
Small round Flex bracket
Small round wood acoustic enclosure*
Small round retrofit enclosure
Fire-rated (listed) deep backcan
Vapor barrier
*While supplies last
92609
92471
92445
92443
92808
91703
109
119
125
127
128
129
1 pair
$32.00
5 pair
$66.50
each$80.00
1 pair
$25.00
each$50.00
12 pair
$225.00
Dealer Cost
VISUAL PERFORMANCE SERIES small square SPEAKERs
visual performance small square speaker
SPECIAL FEATURES One-piece, nearly trimless, low-profile
magnetic grille • Simplified one-step grille painting process
• Very small footprint dramatically expands installation
options • Carbon fiber cone woofer delivers robust bass
• Pivoting tweeter directs sound at listeners • Optional
retrofit molded enclosure reduces sound spillover into
adjacent spaces • Roto-Lock mounting system simplifies
installation • Exclusive FastMount tabs hold speaker in the
mounting hole during installation, allowing the installer to
let go of the speaker to pick-up tools or other items
VP49S
SPECIFICATIONS
Tweeter:
1" (25mm) beryllium dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer:41∕ 2" (114mm) beryllium cone with a rubber surround
Frequency Response:
50Hz – 20kHz ±3dB
Impedance:
6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 100 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Dimensions (W x H x D):
6½" x 6½" x 3 5∕8" (165mm x 165mm x 92mm)
Cut-Out Dims. (W x H):
5 5/8" x 5 5/8" (143mm x 143mm)
Shipping Weight:
6 lbs (2.8kg) pair
PART#................. 92845
QUANTITY.......... PAIR
SPECIFICATIONS
Tweeter:
1" (25mm) silk dome, pivoting
Woofer:41∕ 2" (114mm) carbon fiber cone with a rubber surround
Frequency Response:
58Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 70 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Dimensions (W x H x D):
6½" x 6½" x 3 5∕8" (165mm x 165mm x 92mm)
Cut-Out Dims. (W x H):
5 5/8" x 5 5/8" (143mm x 143mm)
Shipping Weight:
6 lbs (2.8kg) pair
PART#................. 92535
QUANTITY.......... PAIR
VP41S
SPECIFICATIONS
3/ " (19mm) silk dome
Tweeter:
4
Woofer:41∕ 2" (114mm) polypropylene cone with a rubber surround
Frequency Response:
70Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 50 watts maximum
Sensitivity:
89dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Dimensions (W x H x D):
6½" x 6½" x 3 5∕8" (165mm x 165mm x 92mm)
Cut-Out Dims. (W x H):
5 5/8" x 5 5/8" (143mm x 143mm)
Shipping Weight:
6 lbs (2.8kg) pair
V I S U AL P E R FO R M ANCE SE R I ES
VP45S
PART#................. 92842
QUANTITY.......... PAIR
Visual Performance small square speaker ACCESSORIES
Part #
Page #
QTY
Visual Performance small square grille
Small square Flex bracket
Small square wood acoustic enclosure*
Small square retrofit enclosure
Fire-rated (listed) deep backcan
Vapor barrier
*While supplies last
92610
92472
92449
92453
92808
91703
109
119
125
127
128
129
1 pair
$32.00
5 pair
$66.50
each$80.00
1 pair
$25.00
each$50.00
12 pair
$225.00
Dealer Cost
39
39
VISUAL PERFORMANCE SERIES small single stereo SPEAKERs
visual performance small single stereo speakers
SPECIAL FEATURES Sonance's exclusive Single Stereo
Technology® (SST) combines the left and right stereo channels
into a single in-wall speaker. Ideal for kitchens, hallways,
bathrooms, or wherever the listener will be moving about and
a pair of stereo speakers would be impractical.
Visual Performance Series Small speakers can be retrofitted
into mounting holes for Sonance Original Series Small
speakers without modification, making upgrades exceptionally
easy. Visual Performance Series Small speakers can also be
used with accessories for Sonance Original Series Small
speakers, such as Flex brackets, acoustic enclosures, retrofit
backboxes and fire-rated backcans.
VP45R SST — single stereo technology
SPECIFICATIONS
PART#................. 92846
QUANTITY.......... EACH
Tweeter:Two 1" (25mm) silk domes
Woofer:4½" (114mm) carbon fiber cone, with rubber surround
Frequency Response:
58Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 70 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Dimensions (Dia. x D):
67∕8" x 31∕2" (175mm x 89mm)
Cut-Out Diameter:
57∕8" (149mm)
Shipping Weight:
3 lbs (1.4kg) each
For accessories, see "Visual Performance small round speaker ACCESSORIES" on page 38.
VP45s SST — single stereo technology
SPECIFICATIONS
PART#................. 92847
QUANTITY.......... EACH
Tweeter:Two 1" (25mm) silk domes
Woofer:
4½" (114mm) carbon fiber cone, with a rubber surround
Frequency Response:
58Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 70 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Dimensions (W x H x D):
61∕2" x 61∕2" x 35∕8" (165mm x 165mm x 92mm)
Cut-Out Dims (W x H):
55∕8" x 55∕8" (143mm x 143mm)
Shipping Weight:
3 lbs (1.4kg) each
For accessories, see "Visual Performance small square speaker ACCESSORIES" on page 39.
VISUAL PERFORMANCE SERIES woofers
visual performance woofers SPECIAL FEATURES Visual
Performance Series woofers enhance the bass performance of
any home theater or distributed audio system without visually
disturbing the designed space. Must be used in conjunction
with a Sonamp® A800 amplifier (available separately).
VP85 W
SPECIFICATIONS
PART#................. 92740
QUANTITY.......... EACH
40
Woofer: 8" (203mm) long-throw carbon fiber cone, rubber surround
Frequency Response: 35Hz – 250Hz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 10" x 16" x 37∕8 (254mm x 406mm x 98mm)
Cut-Out Dims. (W x H): 81∕2" x 141∕2 (216mm x 368mm)
Shipping Weight: 13 lbs (5.8kg) each
Note: Requires a Sonamp A800 amplifier (available separately (see page 41). The large rectangle
retrofit enclosure is not recommended to be used with this product.
For accessories, see "Visual Performance series Large rectangle speaker Accessories" on page 21.
VISUAL PERFORMANCE SERIES woofers
VP85R W
SPECIFICATIONS
Woofer: 8" (203mm) long-throw carbon fiber cone, rubber surround
Frequency Response: 35Hz – 250Hz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (Dia. x D): 115∕ 8" x 3 7∕ 8" (295mm x 98mm)
Cut-Out Diameter:
101∕ 8" (257mm)
Shipping Weight: 13 lbs (5.8kg) each
Note: Requires a Sonamp A800 amplifier (available separately, see page 41). The large round
retrofit enclosure is not recommended to be used with this product.
For accessories, see "Visual Performance series large round speaker accessories" on page 23.
PART#................. 92741
QUANTITY.......... EACH
VP85s W
SPECIFICATIONS
Woofer: PART#................. 92742
QUANTITY.......... EACH
sonamp woofer amplifier
SONAMP A800 woofer amplifier
Required for the VP85 W, VP85R W, and VP85S W woofers, the Sonamp A800 provides 150 watts
of power and flexible controls that allow the woofer's performance to be optimized for a wide
variety of installation situations.
SPECIFICATIONS
1
90 watts RMS @ 4 ohms
Power Output (program):150 watts @ 4 ohms
Frequency Response:
31Hz – 78Hz (variable to 63Hz) +1/-3dB
0.05% 20Hz – 300Hz @ 8 ohms
Total Harmonic Distortion:
Signal-to-Noise Ratio: -95dB (w/22khz A-WTG filter)
Input Sensitivity: 45mV for 90 watts RMS @ 4 ohms (stereo inputs);
90mV (LFE input)
20k ohms
Input Impedance: Power Consumption: 160 watts maximum (4 ohms, full power);
13 watts idle (no signal)
AC Fuse (120V Version):
4A (T4AL ~250V)
AC Fuse (230V Version):
2A (T2AL ~250V)
98 BTU/HR @ 8 ohms (rock music)
Heat Output: 140 BTU/HR @ 4 ohms (rock music)
Dimensions (W x H x D):
16¾" x 4" x 13½" (425mm x 102mm x 343mm)
Dimensions w/Rack Ears (W x H x D):19" x 4" x 13½" (489mm x 102mm x 343mm)
Rack Space Requirements:
2U
Shipping Weight: 20 lbs (9.1kg) each
V I S U AL P E R FO R M ANCE SE R I ES
8" (203mm) long-throw carbon fiber cone, with a rubber
surround
Frequency Response: 35Hz – 250Hz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 113∕ 4" x 113∕ 4" x 3 7∕ 8" (299mm x 299mm x 98mm)
Cut-Out Dims. (W x H):
101∕ 4" x 101∕ 4" (260mm x 260mm)
Shipping Weight: 13 lbs (5.8kg) each
Note: Requires a Sonamp A800 amplifier (available separately, see page 41). The large square
retrofit enclosure is not recommended to be used with this product.
For accessories, see "Visual Performance series large square speaker accessories" on page 24.
Number of Channels:
Power Output:
PART# (120V)...... 92306
QUANTITY.......... EACH
PART# (230V)....... 92454
QUANTITY.......... EACH
RACK EARS KIT
PART#................. 90603
QUANTITY.......... PAIR
41
41
VISUAL PERFORMANCE SERIES bandpass subwoofer
visual
performance
bandpass
subwoofer
SPECIAL FEATURES The
Visual Performance Bandpass
Subwoofer
(BPS-1)
adds
deep,
powerful
bass
to any audio system. Remaining completely hidden from view,
the BPS-1 delivers its bass energy utilizing a Visual Performance
Series mounting platform and a bandpass connector (both
available separately). The Visual Performance grille provides a
discreet complement to the surrounding space. Requires a
Sonamp A150 amplifier (available separately, see page 43).
BPS-1
SPECIFICATIONS
PART#................. 92478
QUANTITY.......... EACH
Woofer:
8" (203mm) long throw felted paper cone, rubber surround
Frequency Response:
35Hz x 150Hz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
5 watts minimum; 150 watts maximum
Power Handling: Sensitivity: 90dB SPL (2.83V/1 meter)
Enclosure Dims. (W x H x D):
9" x 11" x 391∕ 2" (229mm x 279mm x 1283mm)
Min. Mounting Area:
91∕ 8" x 11" x 53 1∕ 4" (232mm x 279mm x 1352mm)
Shipping Weight: 46 lbs (20.9kg) each
Note: Requires a Sonamp A150 amplifier (available separately, see page 43).
VISUAL PERFORMANCE SERIES bandpass connectors
visual performance bandpass connectors SPECIAL
FEATURES Required Bandpass Connectors allow the
BPS-1 to match the look of Small and Medium, round or
square, Visual Performance Series speakers. The Bandpass
Connectors are heavily flared to minimize port noise during
high-volume passages.
VP6R BPC
SPECIFICATIONS
PART#................. 92870
QUANTITY.......... EACH
Speaker Match:
Cutout Diameter:
Visual Performance Series Medium round speakers
81∕ 4" (210mm)
VP6S BPC
SPECIFICATIONS
PART#................. 92871
QUANTITY.......... EACH
42
Speaker Match:
Cutout Dims. (W x H):
Visual Performance Series Medium round speakers
81∕ 4" x 81∕ 4" (210mm x 210mm)
VISUAL PERFORMANCE SERIES bandpass connectors
VP4R BPC
SPECIFICATIONS
Speaker Match:
Cutout Diameter:
Visual Performance Series Small round speakers
57∕ 8" (149mm)
PART#................. 92868
QUANTITY.......... EACH
VP4S BPC
SPECIFICATIONS
Speaker Match:
Cutout Dims. (W x H):
Visual Performance Series Small square speakers
55∕ 8" x 55∕ 8" (143mm x 143mm)
PART#................. 92869
QUANTITY.......... EACH
SONAMP A150 special features For use with Visual
Performance Series BPS-1 bandpass subwoofer • 150
watts • Front-panel volume, crossover, and phase controls
• Crossover bypass switch • Built-in non-defeatable
limiter prevents overdriving the BPS-1 • Binding-post
speaker connectors • Line-level outputs for daisychaining multiple amplifiers • Defeatable auto-on signal
sensing • Active current limit, short-circuit and speaker
protection • Auto-resetting thermal protection shutoff
• In-rush current-limiting circuit • Supplied alternate
speaker fuse allows a single A150 to drive two BPS-1
subwoofer cabinets • Available in 120V and 230V versions
• Available rack-mount ears
SONAMP A150 subwoofer amplifier
SPECIFICATIONS
Number of Channels:
Power Output:
Power Output (Program): Frequency Response:
Total Harmonic Distortion:
Signal-to-Noise Ratio:
Input Sensitivity (Stereo Inputs):
Input Sensitivity ((LFE, Mono Input):
Input Impedance:
Hi-Level Out Hi-Pass Filter:
Line-Level Out Hi-Pass Filter:
Power Consumption: AC Fuse (120V Version):
AC Fuse (230V Version):
Speaker Fuse (one BPS-1):
Speaker Fuse (two BPS-1s):
Heat Output: Dimensions (W x H x D): Dimensions w/Rack Ears (W x H x D):
Rack Space Requirements:
Shipping Weight: 1
90 watts RMS @ 4 ohms
150 watts @ 4 ohms
31Hz – 150Hz (variable to 40Hz)
0.05% 20Hz – 300Hz @ 8 ohms
-95dB (w/22kHz A-WTG filter)
25mV for 90W @ 4 ohms (volume control @ max)
600mV for 90W @ 4 ohms (Bypass mode)
20k ohms
-3dB @ 200Hz, 6dB/octave
-3dB @ 150Hz, 6dB/octave
160 watts maximum (4 ohms, full power);
13 watts idle (no signal)
4A (T4AL ~250V)
2A (T2AL ~250V)
1.6A (T1.6AL ~250V)
2.0A (T2AL ~250V)
98 BTU/HR @ 8 ohms (rock music)
140 BTU/HR @ 4 ohms (rock music)
16¾" x 4" x 13½" (425mm x 102mm x 343mm)
19" x 4" x 13½" (489mm x 102mm x 343mm)
2U
20 lbs (9.1kg) each
PART# (120V)...... 92476
QUANTITY.......... EACH
V I S U AL P E R FO R M ANCE SE R I ES
sonamp subwoofer amplifier
PART# (230V)....... 92477
QUANTITY.......... EACH
RACK EARS KIT
PART#................. 90603
QUANTITY.......... PAIR
43
43
Accessory Matrix for Visual Performance Series Speakers
speakerAccessory
model
Part # & Page #
44
VP89
VP87
VP85
VP85 W
Metal GrilleFlex BracketSTAPLE templateACOUSTIC enclosure
92614109 92246119
901067120 91708124
92614109 92246119
901067120 91708124
92614109 92246119
901067120 91708124
92614
109 92246119
901067120 91708124
VP89R
VP87R
VP85R
VP85R W
92615109
92615109
92615109
92615
109
92247119
92247119
92247119
92247119
--
--
--
--
91900
91900
91900
91900
124
124
124
124
VP85S
VP85S W
VP69
VP67
VP65
VP65 TL
VP65 SST
VP65 XT
92616109 92801119
92616
109
92801119
--
--
92481
92481
124
124
Metal GrilleFlex BracketSTAPLE templateACOUSTIC enclosure
92611109 92336119
900651120 91687124
92611109 92336119
900651120 91687124
92611109 92336119
900651120 91687124
92611
109 92336119
900651120 91687124
92611
109 92336119
900651120 91687124
92812
110 92336119
900651120 91687124
VP69R
VP67R
VP65R
VP65R TL VP65R SST
VP65R SUR
VP65R XT
VP65R SST XT
92612109
92612109
92612109
92612
109
92612
109
92612
109
92813
110
92813
110
92337119
92337119
92337119
92337119
92337119
92337119
92337119
92337119
VP65S
VP65S TL
VP65S SST
VP65S SUR
92613109
92613
109
92613
109
92613
109
92344119
92344119
92344119
92344119
VP67 lcr
92806
VP45
VP45R
VP45S
Metal GrilleFlex BracketSTAPLE
92608109 92470119
92609109 92471119
92610109 92472119
901049120
901049120
901049120
901049120
901049120
901049120
901049120
901049120
109 92475119
--
--
--
--
--
91688125
91688125
91688125
91688125
91688125
91688125
91688125
91688125
92474
92474
92474
92474
125
125
125
125
--
templateACOUSTIC enclosure
--
--
--
--
92445
125
--
92449
125
Retrofit enclosureFire-rated backcan
92242127
--
92242127
--
92242127
--
--
--
128 92245118--
128 92245118--
128 92245118--
128--
--
92243127 92808128
--
92808
128
Retrofit enclosureFire-rated backcan
9234212792807
128
9234212792807
128
9234212792807
128
9234212792807
128
9234212792807
128
9234212792807
128
128
128
128
128
128
128
128
128
9234312792808
9234312792808
9234312792808
9234312792808
128
128
128
128
--
--
--
--
--
-------
coverplate
Masonry bracket
92334118
92066120
92334118
92066120
92334118
92066120
92334118
92066120
92334118
92066120
92334118
92066120
Vapor barrier
91703129
91703129
91703129
91703129
91703129
91703129
92335118
92335118
92335118
92335118
92335118
92335118
92335118
92335118
--
--
--
--
--
--
--
--
----91703 129
----
--
--
--
--
--
--
--
--
-91703 129
---
--
--
a c c e s s o ry M AT R I X
9234312792808
9234312792808
9234312792808
9234312792808
9234312792808
9234312792808
9234312792808
9234312792808
--
Vapor barrier
91703129
91703129
91703129
91703129
V I S U AL P E R FO R M ANCE SE R I ES
9224312792808
9224312792808
9224312792808
--
92808
coverplate
Masonry bracket
92244 118
--
92244 118
--
92244 118
--
92244 118
--
--
Retrofit enclosureFire-rated backcan
coverplate
Masonry bracket
Vapor barrier
--
92067 120 91703129
92442
127 92807128
92443127
92808
128
-- --
91703 129
92453127
92808
128
-- --
91703 129
45
SURFACE MOUNT SERIES
We believe in the power of architecture to shape the way we live. Like you, we expect elegant solutions to
complex design problems. So, we've created innovative products like the Surface Mount Series to give you
high-performance loudspeakers that fit onto shared walls and shallow ceilings.
S U R FACE M O U NT S P EAKE R S
Sonance Surface Mount Series speakers have a low-profile design that is ideal for installations that cannot
accommodate in-ceiling or in-wall speakers. They are extremely simple to install: Connect the mounting plate to
the speaker wire and screw the mounting plate to a junction box. The speaker attaches to the mounting plate via
powerful neodymium magnets. The rotating mounting plate allows the SM55 and SM55 SST to be aligned with
lighting fixtures or other décor features after installation.
In the SM55 and SM55 SST, Sonance engineers have created speakers that sound great, yet are décor-friendly, easy
to install, and do not require a mounting hole. A one-step paint process saves time compared to traditional flanged
speakers. Sonance Surface Mount speakers are the perfect solution for those who demand quality sound but cannot
use in-ceiling or in-wall speakers.
Surface mount speakers
SM55
SPECIFICATIONS
SM55 PART#....... 92493
QUANTITY.......... PAIR
SM55 Mounting plate
(Sold Separately)
PART#................92494
QUANTITY.......... PAIR
Surface mount single stereo speakers
SM55 SST
specifications
Tweeter:Two 1” (25mm) silk domes, ferrofluid-cooled
Woofer:5¼” (133mm) carbon fiber cone with a rubber surround,
dual voice coil
Frequency Response:
65Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 60 watts maximum
Sensitivity:
88dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (W x H x D):
12 1/8" x 12 1/8" x 3¼" (308mm x 308mm x 83mm)
Shipping Weight:
5 lbs (2.3kg) each
Installation Example:
S U R FACE M O U NT SE R I ES
Tweeter:
1" (25mm) silk dome, ferrofluid-cooled
Woofer:51∕4" (133mm) carbon fiber cone with a rubber surround
Frequency Response:
65Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 60 watts maximum
Sensitivity:
88dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (W x H x D):
12 1/8" x 12 1/8" x 3¼" (308mm x 308mm x 83mm)
Shipping Weight:
9 lbs (4.1kg) per pair
SM55 SST PART#. 92802
QUANTITY.......... each
SM55 SST
Mounting plate
(Sold Separately)
PART#................92803
QUANTITY.......... each
Mounting
Plate
Terminal
Connectors
SM55/SM55 SST
replacement GRILLE
PART#................. 92749
QUANTITY.......... EACH
SM55 Speaker
(back side)
Neodymium
Magnets
SM55 SST Speaker
(back side)
47
SONANCE ORIGINAL SERIES
Since 1982, when Sonance introduced the first architectural high-fidelity loudspeaker for residential
use, we have continued our relentless pursuit of perfection in acoustic performance, versatility, and
reliability to meet the stringent demands of professional AV integrators. Original Series delivers classic
architectural loudspeaker design with unrivaled performance, ease of installation, and selection. Our full
line of loudspeakers and accessories represents one of the broadest portfolios in the industry, providing
the integrator with the right solution for any situation.
S o n a n c e Origi n a l S e ri e s L a rg e Sp e a k e r s
Sonance ORIGINAL Series large Speakers The Sonance Original Series Large speaker line takes installed speaker
performance and technology to a higher level while making installation faster and easier than ever before. All Original
Series speakers incorporate advanced driver materials and technology that give them stunning musical performance.
Eight-inch diameter woofers deliver the kind of deep, powerful bass more commonly found in audiophile free-standing
speakers. The exclusive pivoting Sonic Eye midrange/tweeter assembly directs sound at listeners, producing superior
stereo performance even when mounting restrictions require less than ideal speaker placement. Single Stereo
Technology (SST) speakers combine the outputs of your amplifier's left and right stereo channels to play both from
just one speaker — perfect for smaller spaces like hallways, closets, and bathrooms.
ORIGINAL series large rectangle speakers
original series large rectangle speakers
special features Pivoting Sonic Eye directs sound
at listeners for life-like stereo performance, even
when placement options are limited • Advanced driver
materials for extremely accurate musical performance •
Eight-inch diameter woofers deliver deep, powerful bass
• Three-position tweeter adjustment switch finetunes performance to the room (832) • Exclusive
FastMount tabs hold speaker in the mounting hole
during installation, allowing the installer to let go of the
speaker to pick-up tools or other items • Quick and easy
installation with the Roto-Lock mounting system
832
SPECIFICATIONS
PART#................. 92232
QUANTITY.......... PAIR
831
SPECIFICATIONS
Tweeter: Midrange: Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (W x H x D): Cut-Out Dims. (W x H): Shipping Weight: ¾" (19mm) silk dome, ferrofluid-cooled, pivoting
4" (102mm) polypropylene cone, rubber surround, pivoting
8" (203mm) polypropylene cone, rubber surround
45Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 100 watts maximum
89dB SPL (2.83V/1 meter)
Perforated aluminum
97∕ 8" x 1515∕ 16" x 37∕ 8" (251mm x 405mm x 99mm)
8½" x 14½" (216mm x 368mm)
16 lbs.(7.3kg) pair
O R I G I NAL SE R I ES
Tweeter:
1" (25mm) silk dome, ferrofluid-cooled, pivoting
Midrange: 4" (102mm) polypropylene cone, rubber surround, pivoting
Woofer: 8" (203mm) polypropylene cone, rubber surround
Frequency Response: 38Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 125 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated aluminum
Adjustments: Tweeter level (±3dB)
Dimensions (W x H x D): 97∕ 8" x 1515∕ 16" x 37∕ 8" (251mm x 405mm x 99mm)
Cut-Out Dims. (W x H): 8½” x 14½” (216mm x 368mm)
Shipping Weight: 20 lbs (9kg) pair
PART#................. 92231
QUANTITY.......... PAIR
original series large rectangle speaker ACCESSORIES
Part # Original Series large rectangle metal grille 92289 Large rectangle Flex bracket 92246 Large rectangle wood acoustic enclosure 91708 Large rectangle retrofit enclosure
92242
Large rectangle coverplate
92244 Vapor barrier
91703
Page #
QTY
110
119
124
127
118
129
1 pair
$36.50
5 pair
$66.50
each$110.00
1 pair
$55.00
1 pair
$34.50
12 pair
$225.00
Dealer Cost
49
ORIGINAL series large Round speakers
original
series
large
round
speakers
SPECIAL Features Quick and easy installation • Fullypivoting woofer assembly and pivoting Sonic Eye direct
sound at listeners for life-like stereo sound even when
placement options are limited • Advanced driver materials
deliver extremely accurate musical performance • Eight-inch
diameter woofers deliver deep, powerful bass • Graphite-
Reinforced ABS (GRABS) woofer basket reduces resonances
• Three-position tweeter adjustment switch (832R)
• Exclusive new FastMount tabs hold speaker in the mounting
hole during installation, allowing the installer to let go of the
speaker to pick-up tools or other items • Roto-Lock mounting
system simplifies installation • Paintable aluminum grilles
832R
SPECIFICATIONS
PART#................. 92236
QUANTITY.......... PAIR
Tweeter: 1" (25mm) silk dome, ferrofluid-cooled, pivoting
4" (102mm) polypropylene cone, rubber surround,
Midrange: pivoting
8" (203mm) polypropylene cone, rubber surround,
Woofer: pivoting
Frequency Response: 38Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
5 watts minimum; 125 watts maximum
Power Handling: Sensitivity: 90dB SPL (2.83V/1 meter)
Perforated aluminum
Grille: Adjustments: Tweeter level (±3dB)
Dimensions (Dia. x D): 119/16" x 5 7/8" (294mm x 149mm)
Cut-Out Diameter: 10 1∕8" (257mm)
Shipping Weight: 20 lbs. (9kg) pair
831R
SPECIFICATIONS
PART#................. 92235
QUANTITY.......... PAIR
50
Tweeter: ¾" (19mm) silk dome, ferrofluid-cooled, pivoting
Midrange: 4" (102mm) polypropylene cone, rubber surround,
pivoting
Woofer: 8" (203mm) polypropylene cone, rubber surround,
pivoting
Frequency Response: 45Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 100 watts maximum
Sensitivity: 89dB SPL (2.83V/1 meter)
Grille: Perforated aluminum
Adjustments: None
Dimensions (Dia. x D): 119/16" x 5 7/8" (294mm x 149mm)
Cut-Out Diameter: 10 1∕8" (257mm)
Shipping Weight: 16 lbs. (7.3kg) pair
SONANCE
®
SERIES
ORIGINAL series large single stereo speakers
831R SST - Single Stereo Technology
SPECIFICATIONS
Tweeter: Two ¾" (19mm) silk domes, ferrofluid-cooled
Midrange: Two 3" (76mm) polypropylene cones, rubber
surrounds
8" (203mm) polypropylene cone, dual voice coil,
Woofer: rubber surround, pivoting
Frequency Response: 45Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
5 watts minimum; 100 watts maximum
Power Handling: Sensitivity: 89dB SPL (2.83V/1 meter)
Grille: Perforated aluminum
Dimensions (Dia. x D): 119/16" x 5 7/8" (294mm x 149mm)
Cut-Out Diameter: 10 1∕8" (257mm)
Shipping Weight: 8 lbs. (3.6kg) each
PART#................. 92239
QUANTITY.......... EACH
original series large ROUND speaker ACCESSORIES
Part # Page #
QTY
Original Series large round grille Large round Flex bracket Large round wood acoustic enclosure Large round retrofit enclosure
Fire-rated (listed) large round backcan*
Fire-rated (listed) deep backcan
Large round coverplate
92290 92247 91900 92243
91908
92808
92245 111
119
124
127
128
128
118
1 pair
$36.50
5 pair
$66.50
each$110.00
1 pair
$55.00
each$40.00
each$50.00
1 pair
$34.50
* While supplies last
Dealer Cost
O R I G I NAL SE R I ES
51
S o n a n c e Origi n a l S e ri e s M e d ium Sp e a k e r s
ORIGINAL SERIES medium speakers are available in rectangle,
round, and square shapes. In addition, they are also available
in these special-purpose versions that dramatically increase
installation options:
Single Stereo Technology® (SST): Original Series Single
Stereo speakers combine both left and right signals into one
speaker. They are perfect for use in small spaces, such as
bathrooms and hallways.
ThinLine (TL): Featuring shallow 3" (76mm) depths, Original
Series ThinLine speakers deliver a very high level of audio
performance while allowing installation in areas that are too
shallow to accommodate conventional speakers.
Home Theater Left/Center/Right (LCR): The 623 LCR is
the perfect choice to use as the left, center, and right channel
speaker in a home theater, complementing the look of flatpanel televisions.
Extreme (XT): Extreme speakers are engineered for highhumidity areas and are built to survive extreme temperatures
— from -30°F up to +220°F — while maintaining superior sound
quality. Original Series Extreme speakers are also shock-resistant
and can withstand the pelting of the high seas and salty air,
making them an excellent choice for marine applications.
Home Theater Surround (SUR): Original Series Surround
speakers feature a precisely-mounted dual-tweeter array that
creates a diffuse soundfield that is ideal for in-ceiling surround
channel applications.
original series medium rectangle speakers
original series medium rectangle speakers
SPECIAL FEATURES Small footprint increases installation
options • Advanced woofer cone materials for robust bass •
Tweeter acoustic back chamber widens and smoothes highfrequency performance • Pivoting tweeters direct sound at
listeners • Low-resonance ¾" MDF baffles and cast aluminum
woofer baskets (625 & 624) • Optional retrofit molded
enclosures reduce sound spillover into adjacent spaces
• Roto-Lock clamps require less installation time than
previous models • Exclusive new FastMount tabs hold speaker
in the mounting hole during installation, allowing the installer
to let go of the speaker to pick-up tools or other items
625
SPECIFICATIONS
PART#................. 92321
QUANTITY.......... PAIR
Tweeter:1" (25mm) beryllium dome, ferrofluid-cooled, pivoting, in
acoustic back chamber
Woofer:61∕ 2" (165mm) beryllium cone with a rubber surround,
extended pole piece
Frequency Response:
40Hz – 20kHz ±3dB
Impedance:6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 150 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Perforated aluminum
Grille:
Adjustments:
±3dB tweeter level
Dimensions (W x H x D):
81∕4" x 12 3∕ 16" x 3½" (210mm x 310mm x 89mm)
Cut-Out Dims. (W x H):
615/16" x 10¾" (176mm x 273mm)
Shipping Weight:
12 lbs (5.45kg) pair
624
SPECIFICATIONS
PART#................. 92320
QUANTITY.......... PAIR
52
Tweeter:1" (25mm) aluminum dome, ferrofluid-cooled, pivoting, in
acoustic back chamber
Woofer:61∕ 2" (165mm) coated carbon fiber cone with a rubber
surround, extended pole piece
Frequency Response:
43Hz – 20kHz ±3dB
Impedance:6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 140 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Adjustments:
±3dB tweeter level
Dimensions (W x H x D):
81∕4" x 123∕ 16" x 3½" (210mm x 310mm x 89mm)
Cut-Out Dims. (W x H):
615/16" x 10¾" (176mm x 273mm)
Shipping Weight:
11 lbs (5.0kg) pair
original series medium rectangle speakers
623
SPECIFICATIONS
Tweeter:1" (25mm) silk dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer:61∕ 2" (165mm) carbon fiber cone with a
rubber surround
Frequency Response:
43Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
5 watts minimum; 135 watts maximum
Power Handling:
Sensitivity:
90dB SPL (2.83V/1 meter)
Perforated aluminum
Grille:
Adjustments:
±3dB tweeter level
Dimensions (W x H x D):
81∕4" x 123∕ 16" x 33∕ 8" (210mm x 310mm x 86mm)
Cut-Out Dims. (W x H):
615/16" x 10¾" (176mm x 273mm)
Shipping Weight:
10 lbs (4.5kg) pair
PART#................. 92319
QUANTITY.......... PAIR
622
SPECIFICATIONS
PART#................. 92318
QUANTITY.......... PAIR
621
SPECIFICATIONS
3
Tweeter:
∕4" (19mm) silk dome, ferrofluid-cooled
Woofer:61∕ 2" (165mm) polypropylene cone with a rubber surround
Frequency Response: 50Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 100 watts maximum
Sensitivity:
88dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (W x H x D):
81∕4" x 123∕ 16" x 33∕ 8" (210mm x 310mm x 86mm)
Cut-Out Dims. (W x H):
615/16" x 10¾" (176mm x 273mm)
Shipping Weight:
9 lbs (4.1kg) pair
O R I G I NAL SE R I ES
Tweeter:1" (25mm) silk dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer:61∕ 2" (165mm) polypropylene cone with a rubber surround
Frequency Response:
45Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:5 watts minimum; 125 watts maximum
Sensitivity:
89dB SPL (2.83V/1 meter)
Perforated aluminum
Grille:
Dimensions (W x H x D):
81∕4" x 123∕ 16" x 33∕ 8" (210mm x 310mm x 86mm)
Cut-Out Dims. (W x H):
615/16" x 10¾" (176mm x 273mm)
Shipping Weight:
10 lbs (4.5kg) pair
PART#................. 92317
QUANTITY.......... PAIR
original series medium rectangle speaker ACCESSORIES
Part # Original Series medium rectangle grille 92100* Original Series Extreme rectangular grille 92212 Medium rectangle Flex bracket 92336 Medium rectangle masonry bracket
92066
Medium rectangle staple template
900651
Medium rectangle wood acoustic enclosure 91687 Medium rectangle retrofit enclosure
92342*
Fire-rated (listed) shallow backcan
92807
Medium rectangle coverplate
92334* 91703
Vapor barrier
Page #
QTY
110
111
119
120
120
124
127
128
118
129
1 pair
$32.00
1 pair
$45.00
5 pair
$66.50
1 pair
$22.00
5 pair
$36.50
each$90.00
1 pair
$22.00
each$50.00
1 pair
$17.50
12 pair
$225.00
Dealer Cost
* Not for use with Extreme XT
53
ORIGINAL SERIES Medium round SPEAKERS
original
series
medium
round
speakers
SPECIAL FEATURES Small footprint increases installation options
• Advanced woofer cone materials for robust bass • Tweeter
acoustic back chamber widens and smoothes high-frequency
performance • Fully-pivoting woofers and pivoting tweeters
direct sound at listeners for life-like stereo performance, even
when placement options are limited • Tweeter level control
(±3dB) fine-tunes the sound for the room • Optional retrofit
molded enclosures reduce sound spillover into adjacent spaces
• Roto-Lock clamps require less installation time than previous
models • Exclusive FastMount tabs hold the speaker in the
mounting hole during installation, allowing the installer to let
go of the speaker to pick-up tools or other items
625R
SPECIFICATIONS
PART#................. 92327
QUANTITY.......... PAIR
Tweeter:1" (25mm) beryllium dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer:61∕ 2" (165mm) beryllium cone with a rubber surround,
pivoting
Frequency Response:
40Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 150 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Adjustments:
±3dB tweeter level
Dimensions (Dia. x D):
93∕4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
12 lbs (5.45kg) pair
624R
SPECIFICATIONS
PART#................. 92326
QUANTITY.......... PAIR
Tweeter:1" (25mm) aluminum dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer:61∕ 2" (165mm) coated carbon fiber cone with a
rubber surround, pivoting
Frequency Response:
43Hz – 20kHz ±3dB
Impedance:6 ohms nominal; 4 ohms minimum
5 watts minimum; 140 watts maximum
Power Handling:
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Adjustments:
±3dB tweeter level
Dimensions (Dia. x D):
93∕ 4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
11 lbs. (5.0kg) pair
623R
SPECIFICATIONS
PART#................. 92325
QUANTITY.......... PAIR
54
Tweeter:1" (25mm) silk dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer:61∕ 2" (165mm) carbon fiber cone with a rubber
surround, pivoting
Frequency Response:
43Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 135 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Adjustments:
±3dB tweeter level
Dimensions (Dia. x D):
93∕ 4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
10 lbs. (4.5 kg) pair
SONANCE
®
SERIES
ORIGINAL SERIES Medium Round SPEAKERS
622R
SPECIFICATIONS
Tweeter:1" (25mm) silk dome, ferrofluid-cooled, pivoting,
in acoustic back chamber
Woofer:61∕ 2" (165mm) polypropylene cone with a rubber surround,
pivoting
Frequency Response:
45Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:5 watts minimum; 125 watts maximum
Sensitivity:
89dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (Dia. x D):
93∕4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
10 lbs (4.5kg) pair
PART#................. 92324
QUANTITY.......... PAIR
621R
SPECIFICATIONS
PART#................. 92323
QUANTITY.......... PAIR
original series medium round speaker ACCESSORIES
Part # Original Series medium round grille Original Series Extreme XTR/XSSTR grille Medium round Flex bracket Medium round staple template
Medium round wood acoustic enclosure Medium round retrofit enclosure
Fire-rated (listed) deep backcan
Medium round coverplate
Vapor barrier
92101* 111
92213 111
92337 119
901049
120
91688 § 125
92343* §127
92808 §128
92335* 118
91703**
129
Page #
QTY
Dealer Cost
o rigi n a l s e ri e s
Tweeter:¾" (19mm) silk dome, ferrofluid-cooled
Woofer:61∕ 2" (165mm) polypropylene cone with a rubber surround,
pivoting
Frequency Response:
50Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:5 watts minimum; 100 watts maximum
Sensitivity:
88dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (Dia. x D):
93∕4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
9 lbs (4.1kg) pair
1 pair
$32.00
1 pair
$45.00
5 pair
$66.50
5 pair
$36.50
each$90.00
1 pair
$22.00
each$50.00
1 pair
$17.50
12 pair
$225.00
* Not for use with Extreme XTR and Extreme XSSTR
§ Not for use with 623R TL, 622R TL, 621R TL, 623R TL SST
** Will only work with 623R TL, 622R TL, 621R TL, 623R TL SST
55
ORIGINAL SERIES Medium Square SPEAKERS
original
series
medium
square
speakers
SPECIAL FEATURES Small footprint increases installation
options • Carbon fiber woofer delivers impressive bass
• Tweeter acoustic back chamber widens and smoothes
high-frequency performance • Fully-pivoting woofer and
pivoting tweeter direct sound at listeners for life-like stereo
performance, even when placement options are limited
• Tweeter level control (±3dB) fine-tunes the sound for the
room • Optional retrofit molded enclosure reduces sound
spillover into adjacent spaces • Roto-Lock clamps require less
installation time than previous models • Exclusive FastMount
tabs hold speaker in the mounting hole during installation,
allowing the installer to let go of the speaker to pick-up tools
or other items
623s
SPECIFICATIONS
PART#................. 92331
QUANTITY.......... PAIR
Tweeter:1" (25mm) silk dome, ferrofluid-cooled, pivoting
Woofer:61∕ 2" (165mm) carbon fiber cone with a rubber surround,
pivoting
Frequency Response:
43Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 135 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Adjustments:
±3dB tweeter level
Dimensions (W x H x D):
93∕4" x 9¾" x 4¾" (248mm x 248mm x 121mm)
Cut-Out Dims. (W x H):
8¼" x 8¼" (210mm x 210mm)
Shipping Weight:
10 lbs (4.5kg) pair
original series medium square speaker ACCESSORIES
Part # Original Series medium square metal grille 92458
Medium square Flex bracket 92344 Fire-rated (listed) deep backcan
92808
Page #
QTY
Dealer Cost
111
1 pair
$32.00
119
5 pair
$66.50
128 each$50.00
ORIGINAL SERIES Medium cabinet SPEAKERS
S622c CABINET SPEAKER
SPECIFICATIONS
PART#................. 92116
QUANTITY.......... EACH
56
Tweeter:1" (25mm) silk dome, ferrofluid-cooled
Woofer:61∕ 2" (165mm) polypropylene cone with a rubber surround
Frequency Response:
45Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 125 watts maximum
Sensitivity:
89dB SPL (2.83V/1 meter)
Cabinet Material:1" MDF (baffle and rear panel); ½" MDF / ½" particle board
laminate (top, bottom and sides)
Grille:Black cloth
Finish:Black
Dimensions (W x H x D):
71∕ 2" x 11" x 111∕ 2" (191mm x 279mm x 292mm)
Shipping Weight:
18 lbs (8.2kg) each
ORIGINAL SERIES Medium single stereo SPEAKERS
623 SST - Single Stereo Technology
SPECIFICATIONS
Tweeter: Two 1" (25mm) silk domes, ferrofluid-cooled
6½" (165mm) carbon fiber cone with a rubber Woofer: surround
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 135 watts maximum
Sensitivity: 90dB SPL (2.83V 1 meter)
Perforated aluminum
Grille: Dimensions (W x H x D): 8¼" x 123∕ 16" x 33∕ 8" (210mm x 310mm x 86mm)
Cut-Out Dims. (W x H):
615/16" x 10¾" (176mm x 273mm)
Shipping Weight: 5 lbs (2.3kg) each
PART#................. 92322
QUANTITY.......... EACH
623R SST - Single Stereo Technology
SPECIFICATIONS
PART#................. 92330
QUANTITY.......... EACH
623R TL SST - Single Stereo Technology
SPECIFICATIONS
Tweeter: Two 1" (25mm) silk domes, ferrofluid-cooled
Woofer: 6½" (165mm) carbon fiber cone with a rubber
surround, dual voice coil
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 135 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated aluminum
Adjustments: ±3dB Tweeter level
Dimensions (Dia. x D): 9¾" x 3" (248mm x 76mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight: 5 lbs (2.3kg) each
Origi n a l S e ri e s
Tweeter: Two 1" (25mm) silk domes, ferrofluid-cooled
6½" (165mm) carbon fiber cone with a rubber
Woofer: surround, dual voice coil, pivoting
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
5 watts minimum; 135 watts maximum
Power Handling: Sensitivity: 90dB SPL (2.83V/1 meter)
Perforated aluminum
Grille: Adjustments: ±3dB Tweeter level
Dimensions (Dia. x D): 9¾" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight: 5 lbs (2.3kg) each
PART#................. 92312
QUANTITY.......... EACH
621R SST - Single Stereo Technology
SPECIFICATIONS
Tweeter:Two 3∕4" (19mm) silk domes, ferrofluid-cooled
Woofer:61∕ 2" (165mm) polypropylene cone with a
rubber surround, dual voice coil, pivoting
Frequency Response:
50Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 100 watts maximum
Sensitivity:
88dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (Dia. x D):
93∕4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
4.5 lbs (2.0kg) Each
PART#................. 92329
QUANTITY.......... EACH
57
ORIGINAL SERIES MEDIUM home theater SPEAKERS
original series medium home theater speakers
SPECIAL FEATURES Ideal for all three front-channel home
theater applications • The perfect center-channel counterpart
for an Original Series left and right channel speaker pair
• Tweeter level control (±3dB) fine-tunes performance for
the room • Fits standard 16" on-center stud construction •
Roto-Lock mounting system simplifies installation • Exclusive
FastMount tabs hold speaker in the mounting hole during
installation, allowing the installer to let go of the speaker to
pick-up tools or other items
623 LCR
SPECIFICATIONS
PART#................. 92473
QUANTITY.......... EACH
Tweeter: 1” (25mm) silk dome, ferrofluid-cooled
Woofer: Two 6½” (165mm) carbon fiber cones with rubber
surrounds
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 135 watts maximum
Sensitivity: 92dB SPL (2.83V/1 meter)
Perforated aluminum
Grille: Adjustments: ±3dB tweeter level
Dimensions (W x H x D): 16” x 8¼” x 3½" (407mm x 210mm x 89mm)
Cut-Out Dims. (W x H): 6 7/8” x 14½” (175mm x 368mm)
Shipping Weight: 8 lbs (3.6kg) each
623R SUR surround
SPECIFICATIONS
PART#................. 92328
QUANTITY.......... PAIR
Tweeter:Two 1" (25mm) silk domes, ferrofluid-cooled
Woofer:61∕ 2" (165mm) carbon fiber cone with a rubber surround
Frequency Response:
55 Hz – 20 kHz ±3dB
90dB SPL (2.83V/1 meter)
Sensitivity:
Power Handling:
5 watts min; 150 watts max
Impedance:
8 ohms nominal; 7 ohms minimum
Perforated aluminum
Grille:
Dimensions (Dia. x D):
9 3∕4" x 5 3∕ 16" (248mm x 132mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
11 lbs (5.0kg) pair
original series medium home theater speaker accessories
Part #
Page #
Original Series medium LCR grille
Medium LCR Flex bracket
Medium LCR retrofit enclosure
92738
92475
92836
111 each$20.00
119 each$14.00
127 each$17.50
QTY
Dealer Cost
Note: Additional accessories for these products are listed on pages 53 and 55 as well as in the Accessories
Matrix on page 66.
58
ORIGINAL SERIES MEDIUM thinline SPEAKERS
SONANCE
SERIES
®
623R TL thinline
SPECIFICATIONS
Tweeter: Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Adjustments: Dimensions (Dia. x D): Cut-Out Diameter: Shipping Weight: 1" (25mm) silk dome, ferrofluid-cooled, pivoting
6½" (165mm) carbon fiber cone, rubber surround
43Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 135 watts maximum
90dB SPL (2.83V/1 meter)
Perforated aluminum
±3dB Tweeter level
9¾" x 3" (248mm x 76mm)
8¼" (210mm)
10 lbs (4.5kg) pair
PART#................. 92311
QUANTITY.......... PAIR
622R TL thinline
SPECIFICATIONS
PART#................. 92310
QUANTITY.......... PAIR
621R TL thinline
SPECIFICATIONS
Tweeter: Woofer: Frequency Response: Impedance: Power Handling: Sensitivity: Grille: Dimensions (Dia. x D): Cut-Out Diameter:
Shipping Weight: ¾" (19mm) silk dome, ferrofluid-cooled
6½" (165mm) polypropylene cone with a
rubber surround
50Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 100 watts maximum
88dB SPL (2.83V/1 meter)
Perforated aluminum
9¾" x 3" (248mm x 76mm)
8¼" (210mm)
9 lbs (4.1kg) pair
O R I G I NAL SE R I ES
Tweeter:1" (25mm) silk dome, ferrofluid-cooled, pivoting
Woofer:61∕ 2" (165mm) polypropylene cone, rubber surround
Frequency Response:
45Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:5 watts minimum; 125 watts maximum
Sensitivity:
89dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (Dia. x D):
9 3∕4" x 3" (248mm x 76mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
10 lbs (4.5kg) pair
PART#................. 92309
QUANTITY.......... PAIR
Note: Accessories for these products are listed on page 55 as well as in the Accessories Matrix on page 66.
59
ORIGINAL series medium extreme speakers
EXTREME XT
SPECIFICATIONS
PART#................. 91636
QUANTITY.......... PAIR
Tweeter: 1" (25mm) polyurethane dome
Woofer: 61∕ 2" (165mm) one-piece black anodized aluminum cone
with a Santoprene surround
Frequency Response: 55Hz – 20kHz ±3dB
Impedance: 8 ohms nominal, 6 ohms minimum
5 watts minimum; 60 watts maximum
Power Handling: Sensitivity: 89dB SPL (2.83V/1 meter)
Grille: Powder-coated stainless steel
Dimensions (W x H x D):
8¼" x 12 3∕ 16" x 21∕ 2" (210mm x 310mm x 63.5mm)
Cut-Out Dims. (W x H):
615/16" x 10¾" (176mm x 273mm)
Shipping Weight: 9 lbs (4.1kg) pair
EXTREME XTR
SPECIFICATIONS
PART#................. 91637
QUANTITY.......... PAIR
Tweeter: 1" (25mm) polyurethane dome
Woofer: 61∕ 2" (165mm) one-piece black anodized aluminum cone
with a Santoprene surround
Frequency Response: 55Hz – 20kHz ±3dB
Impedance: 8 ohms nominal, 6 ohms minimum
5 watts minimum; 60 watts maximum
Power Handling: Sensitivity: 89dB SPL (2.83V/1 meter)
Powder-coated stainless steel
Grille: Dimensions (Dia x D): 9 3∕4" x 4" (248mm x 102mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight: 9 lbs (4.1kg) pair
EXTREME XTR SST - Single Stereo Technology
SPECIFICATIONS
PART#................. 91638
QUANTITY.......... EACH
Tweeter: Two 1" (25mm) polyurethane domes
Woofer: 61∕ 2" (165mm) dual voice coil, one piece black anodized
aluminum cone with a Santoprene surround
Frequency Response: 55Hz – 20kHz ±3dB
Impedance: 8 ohms nominal, 6 ohms minimum
Power Handling: 5 watts minimum; 60 watts maximum
Sensitivity: 89dB SPL (2.83V/1 meter)
Grille: Powder-coated stainless steel
Dimensions (Dia x D): 9 3∕4" x 5 3∕ 16" (248mm x 132mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight: 41∕ 2 lbs (2.1kg) each
Note: Additional accessories for these products are listed on pages 53 and 55 as well as in the
Accessories Matrix on page 66.
60
S o n a n c e Origi n a l S e ri e s Sm a l l Sp e a k e r s
Sonance Original Series Small Speakers include six different models with performance that will satisfy demanding
listeners, yet they are small enough to fit effortlessly in smaller rooms or challenging installation locations. Two rectangle models,
two round models, a square model, and a Single Stereo Technology model provide flexibility for most installation situations.
ORIGINAL series small rectangle speakers
original series small rectangle speakers
SPECIAL FEATURES Advanced woofer cone materials deliver
solid bass performance • Low-resonance die-cast woofer
basket (423) • Pivoting tweeters direct sound at listeners for
life-like stereo performance even when placement options
are limited • Removable IR plug for discreet placement of
IR receiver in the speaker's front baffle, allowing remotes to
be aimed at the front of the room even when the electronics
are placed in an inconvenient location
423
SPECIFICATIONS
1" (25mm) silk dome, pivoting
4½" (114mm) carbon fiber cone with a rubber surround,
die-cast woofer basket
55Hz - 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 80 watts maximum
90dB SPL (2.83V/1 meter)
Perforated aluminum
5½" x 87∕ 8" x 3" (140mm x 225mm x 76mm)
45∕8" x 8" (117mm x 203mm)
6 lbs (2.8kg) pair
PART#................. 92357
QUANTITY.......... PAIR
O R I G I NAL SE R I ES
Tweeter:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille:
Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight:
422
SPECIFICATIONS
Tweeter:
¾" (19mm) silk dome, pivoting
Woofer:41∕ 2" (114mm) polypropylene cone with a rubber surround
Frequency Response:
60Hz - 20kHz ±3dB
Impedance:
8 ohms nominal ; 6 ohms minimum
5 watts minimum; 60 watts maximum
Power Handling:
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (W x H x D):
5½" x 87∕ 8" x 3" (140mm x 225mm x 76mm)
Cut-Out Dims. (W x H):
45∕8" x 8" (117mm x 203mm)
Shipping Weight:
6 lbs (2.8kg) pair
PART#................. 92356
QUANTITY.......... PAIR
original series small rectangle speaker ACCESSORIES
Part # Original Series Small rectangle metal grille 92087 Small rectangle Flex bracket 92470 Small rectangle masonry bracket
92067
Small rectangle retrofit enclosure
92442
Fire-rated (listed) shallow backcan
92807
Vapor barrier
91703
Page #
QTY
110
119
120
127
128
129
1 pair
$29.00
5 pair
$66.50
1 pair
$15.00
1 pair
$25.00
each$50.00
12 pair
$225.00
Dealer Cost
61
ORIGINAL series small Round speakers
original
series
small
round
speakers
SPECIAL FEATURES Advanced woofer cone materials deliver
solid bass performance • Pivoting tweeters direct sound
at listeners for life-like stereo performance even when
placement options are limited • Single Stereo Technology
model plays left and right channels from a single speaker —
ideal for kitchens, bathrooms, and hallways
422R
SPECIFICATIONS
PART#................. 92359
QUANTITY.......... PAIR
Tweeter:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille:
Dimensions (Dia x D):
Cut-Out Diameter:
Shipping Weight:
¾" (19mm) silk dome, pivoting
4½" (114mm) polypropylene cone with a rubber surround
60Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 60 watts maximum
90dB SPL (2.83V/1 meter)
Perforated aluminum
67∕ 8" x 31∕ 2" (175mm x 89mm)
57∕ 8" (149mm)
6 lbs (2.8kg) pair
421R
SPECIFICATIONS
Tweeter:
Woofer:
PART#................. 92358
QUANTITY.......... PAIR
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille:
Dimensions (Dia x D):
Cut-Out Diameter:
Shipping Weight:
¾" (19mm) silk dome
4½" (114mm) polypropylene cone with a rubber surround
70Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 50 watts maximum
89dB SPL (2.83V/1 meter)
Perforated aluminum
67∕ 8" x 31∕2" (175mm x 89mm)
57∕ 8" (149mm)
6 lbs (2.8kg) pair
original series small round speaker accessories
Part #
Page #
QTY
Original Series small round metal grille
Small round Flex bracket
Small round retrofit enclosure
Small round wood acoustic enclosure*
Fire-rated (listed) deep backcan
92088
92471
92443
92445
92808
111
119
127
125
128
1 pair
$29.00
5 pair
$66.50
1 pair
$25.00
each$80.00
each$50.00
*While supplies last
62
Dealer Cost
ORIGINAL series small square speakers
original
series
small
square
speakers
SPECIAL FEATURES Advanced woofer cone materials deliver
solid bass performance • Pivoting tweeter directs sound
at listeners for life-like stereo performance even when
placement options are limited
422S
SPECIFICATIONS
Tweeter:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille:
Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight:
¾" (19mm) silk dome, pivoting
4½" (114mm) polypropylene cone with a rubber surround
60Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 60 watts maximum
90dB SPL (2.83V/1 meter)
Perforated aluminum
61∕ 2" x 61∕2" x 3 5∕8" (165mm x 165mm x 92mm)
5 5∕ 8" x 5 5∕ 8" (143mm x 143mm)
3 lbs (1.4kg)
PART#................. 92361
QUANTITY.......... pair
original series small square speaker accessories
Part #
Page #
QTY
Original Series Small square metal grille
Small square Flex bracket
Small square retrofit enclosure
Small square wood acoustic enclosure*
Fire-rated (listed) deep backcan
92599
92472
92453
92449
92808
111
119
127
125
128
1 pair
$29.00
5 pair
$66.50
1 pair
$25.00
each$80.00
each$50.00
Dealer Cost
* While supplies last
ORIGINAL series small Single Stereo speakers
O R I G I NAL SE R I ES
421R SST - Single Stereo Technology
SPECIFICATIONS
Tweeter:Two ¾" (19mm) silk domes
Woofer:
4½" (114mm) polypropylene cone with a rubber surround
Frequency Response:
70Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 50 watts maximum
Sensitivity:
89dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (Dia x D):
67∕ 8" x 31∕2" (175mm x 89mm)
Cut-Out Diameter:
57∕ 8" (149mm)
Shipping Weight:
3 lbs (1.4kg)
PART#................. 92360
QUANTITY.......... EACH
Note: Accessories for these products are listed on page 62 as well as in the Accessories Matrix on page 66.
63
S o n a n c e Origi n a l S e ri e s W o o f e r s
Sonance Original Series woofers enhance the bass performance of any home theater or distributed audio system. Available in
both in-wall and in-ceiling configurations and in amplified and passive versions, these woofers can be used with practically any type
of audio system. Eight-inch diameter carbon fiber cones deliver the kind of deep, powerful bass more commonly found in audiophile
free-standing speakers. Amplified versions require a Sonamp A800 amplifier (available separately). The A800 delivers 150 watts of
power and provides flexible controls, allowing the installer or listener to fine-tune the woofer and optimize its performance for a wide
variety of audio systems and listening situations. Exclusive new FastMount tabs and Roto-Lock mounting system make installing
these woofers easier than ever before.
original series Large woofers
original series woofers SPECIAL Features Three models
available: Amplified in-wall (A800D), amplified in-ceiling
(A800DR) and passive in-wall (P800D) • Amplified versions
require Sonamp A800 amplifier (available separately, see
listing on this page) • Eight-inch diameter woofers deliver
deep, powerful bass • Cast aluminum woofer baskets
• Exclusive new FastMount tabs hold speaker in the mounting
hole during installation, allowing the installer to let go
of the speaker to pick-up tools or other items • RotoLock mounting system simplifies installation • Paintable
aluminum grilles • Optional wood acoustic enclosures
optimize bass performance and reduce sound spillover
from rear to adjacent rooms
A800D amplified in-wall woofer
SPECIFICATIONS
PART# (WOOFER ONLY)
.......................... 92302
QUANTITY.......... EACH
Woofer: Frequency Response: Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight: 8" (203mm) long-throw carbon fiber cone, with
a rubber surround
35Hz – 250Hz
97∕ 8" x 1515∕ 16" x 37∕ 8" (251mm x 405mm x 99mm)
8½" x 14½" (216mm x 368mm)
9 lbs (4.1kg)
Note: Requires a Sonamp A800 amplifier (available separately, see page 41).
A800DR amplified in-ceiling woofer
SPECIFICATIONS
PART# (WOOFER ONLY)
.......................... 92305
QUANTITY.......... EACH
Woofer: Frequency Response: Dimensions (Dia x D): Cut-Out Diameter: Shipping Weight: 8" (203mm) long-throw carbon fiber cone, with
a rubber surround
35Hz – 250Hz
11¼" x 6" (286mm x 152mm)
101∕ 8" (257mm)
9 lbs (4.1kg)
Note: Requires a Sonamp A800 amplifier (available separately, see page 41).
P800D passive in-wall woofer
SPECIFICATIONS
PART#................. 92303
QUANTITY.......... EACH
64
Woofer: Frequency Response: Power Handling: Sensitivity: Crossover Frequency: Dimensions (W x H x D): Cut-Out Dims. (W x H): Shipping Weight: 8" (203mm) long-throw carbon fiber cone,
dual voice coil, with a rubber surround
35Hz – 250Hz
150 watts
90dB SPL (2.83V/1 meter)
150 Hz
97∕ 8" x 1515∕ 16" x 37∕ 8" (251mm x 405mm x 99mm)
8½" x 14½" (216mm x 368mm)
13 lbs (5.8 kg) each
Original Series Large Woofers
original series woofer ACCESSORIES
Part # Original Series Large rectangle metal grille 92289 Original Series Large round metal grille 92290 Large rectangle Flex bracket 92246 Large round Flex bracket 92247 Large rectangle wood acoustic enclosure 91708 Large round wood acoustic enclosure 91900 Large rectangle coverplate
92244 Large round coverplate
92245 Page #
QTY
110
111
119
119
124
124
118
118
1 pair
$36.50
1 pair
$36.50
5 pair
$66.50
5 pair
$66.50
each$110.00
each$110.00
1 pair
$34.50
1 pair
$34.50
Dealer Cost
Sonamp Woofer Amplifier
Line-level outputs
for daisy-chaining multiple
amplifiers • Defeatable auto-on signal sensing •
Active current limit, short-circuit and speaker
protection • Auto-resetting thermal protection shutoff
• In-rush current-limiting circuit • Available in 120V and
230V versions • Available rack-mount ears
SONAMP A800 woofer amplifier
SPECIFICATIONS
Number of Channels:
Power Output:
1
90 watts RMS @ 4 ohms
Power Output (program):150 watts @ 4 ohms
Frequency Response:
31Hz – 78Hz (variable to 63Hz) +1/-3dB
Total Harmonic Distortion:
0.05% 20Hz – 300Hz @ 8 ohms
Signal-to-Noise Ratio: -95dB (w/22khz A-WTG filter)
Input Sensitivity: 45mV for 90 watts RMS @ 4 ohms (stereo inputs);
90mV (LFE input)
Input Impedance: 20k ohms
Power Consumption: 160 watts maximum (4 ohms, full power);
13 watts idle (no signal)
AC Fuse (120V Version):
4A (T4AL ~250V)
AC Fuse (230V Version):
2A (T2AL ~250V)
Heat Output: 98 BTU/HR @ 8 ohms (rock music)
140 BTU/HR @ 4 ohms (rock music)
Dimensions (W x H x D):
16¾" x 4" x 13½" (425mm x 102mm x 343mm)
Dimensions w/Rack Ears (W x H x D):19" x 4" x 13½" (489mm x 102mm x 343mm)
Rack Space Requirements:
2U
Shipping Weight: 20 lbs (9.1kg)
PART# (120V)...... 92306
QUANTITY.......... EACH
O R I G I NAL SE R I ES
SONAMP A800 special features For use
with VP85 W, VP85R W, VP85S W, A800d,
A800dr, SAW • 150 watts
(program) • Frontpanel volume, crossover, and phase controls
• Built-in non-defeatable limiter prevents overdriving
woofers • Binding-post speaker connectors •
PART# (230V)....... 92454
QUANTITY.......... EACH
RACK EARS KIT
PART#................. 90603
QUANTITY.......... PAIR
65
Accessory Matrix for original Series Speakers
Original Series Large Speakers
speaker
Metal grilleCloth grilleFlex bracketmasonry bracket
STAPLE template
832
92289110
--
92246119
--
901067
120
831
92289110
--
92246119
--
901067
120
832R
92290111
--
92247119
--
--
831R
92290111
--
92247119
--
--
831R SST
92290
--
92247119
--
--
part#page#
111
Original Series medium Speakers
speaker
Metal grilleCloth grilleFlex bracketmasonry bracketSTAPLE template
625
92100110
--
92336 119
92066120
900651120
624
92100110
--
92336 119
92066120
900651120
623
92100110
--
92336 119
92066120
900651120
622
92100110
--
92336 119
92066120
900651120
621
92100110
--
92336 119
92066120
900651120
623 sst
92100
110
--
92336 119
92066120
900651120
Extreme XT
92212
111
--
92336 119
92066120
900651120
625R
92101111
--
92337 119
--
901049 120
624R
92101111
--
92337 119
--
901049 120
623R
92101111
--
92337 119
--
901049 120
622R
92101111
--
92337 119
--
901049 120
621R
92101111
--
92337 119
--
901049 120
623R TL
92101
111
--
92337 119
--
901049 120
622R TL
92101
111
--
92337 119
--
901049 120
621R TL
92101
111
--
92337 119
--
901049 120
623R SST
92101
111
--
92337 119
--
901049 120
621R SST
92101
111
--
92337 119
--
901049 120
623R TL SST
92101
111
--
92337 119
--
901049 120
623R SRS
92101
111
--
92337 119
--
901049 120
EXTREME XTR
92213
111
--
92337 119
--
901049 120
EXTREME XSSTR
92213
111
--
92337 119
--
901049 120
623s
92458111
--
92344 119
--
--
623 LCR
92738
111
--
92475 119
--
--
116
----
--
-- --
--
Symphony S622701114
--
Original Series small Speakers
speaker
66
Metal grilleCloth grilleFlex bracketmasonry bracketSTAPLE template
42392087
110
--
92470 119
92067120
--
422
92087110
--
92470 119
92067120
--
421R
92088111
--
92471 119
--
--
421R SST
92088
111
--
92471 119
--
--
422S
92599111
--
92472 119
--
--
RETROFIT enclosure
WOoD ACOUSTIC enclosureFire-rated backcan
coverplatevapor barrier
9224212791708 124
--
92244118
91703129
9224212791708 124
--
92244118
91703129
92243
12791900 124 91908*/92808128
92245118--
92243
12791900 124 91908*/92808128
92245118--
92243
12791900 124 91908*/92808128
92245118--
RETROFIT enclosure
WOoD ACOUSTIC enclosureFire-rated backcan
coverplatevapor barrier
9234212791687 12492807
128
92334118
91703129
9234212791687 12492807
128
92334118
91703129
9234212791687 12492807
128
92334118
91703129
9234212791687 12492807
128
92334118
91703129
9234212791687 12492807
128
92334118
91703129
9234212791687 12492807
128
92334118
91703129
--
91687
12492807
128--
91703 129
--
O R I G I NAL
9234312791688 12592808
128
92335118
9234312791688 12592808
128
92335118--
9234312791688 12592808
128
92335118--
9234312791688 12592808
128
92335118--
9234312791688 125 92808128
92335118--
--
--
--
92335 118
91703129
--
--
--
92335 118
91703129
--
--
--
92335
91703129
118
9234312791688 12592808
128
92335118--
9234312791688 12592808
128
92335118--
--
--
--
9234312791688 12592808
128
92335 118
91703129
92335118--
--
91688
12592808
128
----
--
91688
12592808
128
----
--
--
--
--
RETROFIT enclosure
92808
128--
----
WOoD ACOUSTIC enclosureFire-rated backcan
a c c e s s o ry M AT R I X
SE R I ES
--
--
coverplatevapor barrier
92242
127
--
92807
128--
91703 129
92242
127
--
92807
128--
91703 129
92443
12792445 125
92808
128--
--
92443
12792445 125
92808
128--
--
92453
12792449 125
92808 128--
--
*While supplies last.
Replacement is fire-rated
(listed) deep backcan
(#92808).
67
contractor series
Sonance Contractor Series speakers deliver high-fidelity sound and value. With a variety of speakers
available, the Sonance Contractor Series provides installers multiple options to fulfill their client's price,
design, and audio requirements.
S o n a n c e C o n t r a c t o r S e ri e s Sp e a k e r s
SONANCE Contractor SERIES SPEAKERS High fidelity sound at value prices. The Sonance Contractor Series offers
installers even more choices for distributed audio applications. Finished with the Sonance diamond-perforated
speaker grilles, Contractor Series speakers can be mix and matched with Original Series Large and Medium installs.
They are perfect for bedrooms, entryways, corridors, garages, and patio covers.
contractor series rectangle speakers
SPECIAL FEATURES Black baffles eliminate speaker
cone shadows through the grilles • Woofers
are back-mounted on the baffle for improved
isolation from the local environment • All models
are weather-resistant • Pivoting tweeter directs
sound at listeners for life-like stereo reproduction
even when placement options are limited (C201)
• Removable IR plug for discreet placement of IR receiver
in the speaker's front baffle, allowing remotes to be
aimed at the front of the room even when the electronics
are placed in an inconvenient location • Can be used
with most Original Series Medium rectangle accessories
C201
SPECIFICATIONS
PART#................. 91801
QUANTITY.......... PAIR
C101
SPECIFICATIONS
Tweeter:
½" (12mm) treated cloth dome
Woofer: 6½" (165 mm) polypropylene cone with a rubber surround
Frequency Response: 70Hz – 20kHz ±3dB
Sensitivity: 88dB SPL (2.83V/1meter)
Power Handling: 5 watts minimum; 80 watts maximum
Impedance: 8 ohms nominal
Grille: Perforated aluminum
Dimensions (W x H x D): 8¼" x 123/16" x 3¾" (210mm x 310mm x 95mm)
Cut-Out Dims. (W x H): 6¾" x 10¾" (171mm x 273mm)
Shipping Weight: 8 lbs (3.63kg) pair
c o n t r a c t o r SE R I ES
Tweeter:
¾" (19mm) treated cloth dome, pivoting
Woofer: 6½" (165 mm) polypropylene cone with a rubber surround
Frequency Response: 65Hz – 20kHz ±3dB
Sensitivity: 88dB SPL (2.83V/1meter)
Power Handling: 5 watts minimum; 100 watts maximum
Impedance: 8 ohms nominal
Grille: Perforated aluminum
Dimensions (W x H x D): 8¼" x 123/16" x 3¾" (210mm x 310mm x 95mm)
Cut-Out Dims. (W x H): 6¾" x 10¾" (171mm x 273mm)
Shipping Weight: 8 lbs (3.63kg) pair
PART#................. 91800
QUANTITY.......... PAIR
Contractor series rectangle speaker Accessories
Part #
Page#
QTY
Contractor Series medium rectangle grille
Medium rectangle Flex bracket
Medium rectangle staple template
Medium rectangle wood acoustic enclosure
Fire-rated (listed) shallow backcan
Medium rectangle coverplate
Medium rectangle masonry bracket
91943
92336
900651
91687
92807
92334
92066
112
119
120
124
128
118
120
1 pair
$32.00
5 pair
$66.50
5 pair
$36.50
each$90.00
each$50.00
1 pair
$17.50
1 pair
$22.00
Dealer Cost
69
ContRactor SERIES Round speakers
SPECIAL FEATURES Black baffles eliminate speaker cone
shadows through the grilles • Woofers are back-mounted on
the baffle for improved isolation from the local environment
•
Eight-inch
woofer
delivers
impressive
bass
(CR801)
•
All
models
are
weather-resistant
• Pivoting tweeter directs sound at listeners
for
life-like
stereo
reproduction
even
when
placement options are limited (CR801, CR201)
• Can be used with some Original Series Large (CR801),
and Medium (CR201, CR101, CR101SST) round speaker
accessories
CR801
SPECIFICATIONS
PART#................. 91807
QUANTITY.......... PAIR
Tweeter: 1" (25mm) pivoting, treated cloth dome
Woofer: 8" (203 mm) black polypropylene cone with a rubber surround
Frequency Response: 47Hz – 20kHz ±3dB
Sensitivity: 89dB SPL (2.83V/1meter)
Power Handling: 5 watts minimum; 120 watts maximum
8 ohms nominal, 6 ohms minimum
Impedance: Grille: Perforated aluminum
Dimensions (Dia x D): 12" x 4" (305mm x 102mm)
Cut-Out Diameter: 10 1/8" (257mm)
Shipping Weight: 12 lbs (5.45kg) pair
CR801 ACCESSORIES
Part # Page #
QTY
Contractor Series CR801 metal grille Large round Flex bracket Large round wood acoustic enclosure Fire-rated (listed) deep backcan
Large round coverplate
92013 92247 91900 92808
92245 112
119
124
128
118
1 pair
$36.50
5 pair
$66.50
each$110.00
each$50.00
1 pair
$34.50
Dealer Cost
CR201
SPECIFICATIONS
PART#................. 91804
QUANTITY.......... PAIR
Tweeter:
Woofer: Frequency Response: Sensitivity: Power Handling: Impedance: Grille: Dimensions (Dia x D): Cut-Out Diameter: Shipping Weight: ¾" (19mm) treated cloth dome, pivoting
6½" (165mm) polypropylene cone with a rubber surround
65Hz – 20kHz ±3dB
88dB SPL (2.83V/1meter)
5 watts minimum; 100 watts maximum
8 ohms nominal, 6 ohms minimum
Perforated aluminum
9 3∕4" x 33∕4" (248mm x 95mm)
8¼" (210mm)
8 lbs (3.63kg) pair
CR101
SPECIFICATIONS
PART#................. 91803
QUANTITY.......... PAIR
70
Tweeter: Woofer: Frequency Response: Sensitivity: Power Handling: Impedance: Grille: Dimensions (Dia x D): Cut-Out Diameter: Shipping Weight: ½" (12mm) treated cloth dome
6½" (165mm) polypropylene cone with a rubber surround
60Hz – 20kHz ±3dB
88dB SPL (2.83V/1meter)
5 watts minimum; 80 watts maximum
8 ohms nominal, 6 ohms minimum
Perforated aluminum
9 3∕4" x 33∕4" (248mm x 95mm)
8¼" (210mm)
8 lbs (3.63kg) pair
Contractor SERIES round speakers
CR101SST
SPECIFICATIONS
Tweeter: Two ½" (12mm) treated cloth domes
Woofer: 6½" (165mm) polypropylene cone with a rubber surround,
dual voice coil
Frequency Response: 70Hz – 20kHz ±3dB
Sensitivity: 88dB SPL (2.83V/1meter)
Power Handling: 5 watts minimum; 80 watts maximum
Impedance: 8 ohms nominal, 6 ohms minimum
Grille: Perforated aluminum
Dimensions (Dia x D): 9 3∕4" x 33∕4" (248mm x 95mm)
Cut-Out Diameter: 8¼" (210mm)
Shipping Weight: 4 lbs (1.8kg) each
PART#................. 91806
QUANTITY.......... EACH
ContRactor series Round speaker Accessories
Part #
Page#
QTY
Contractor Series round metal grille
Medium round Flex bracket
Medium round staple template
Medium round wood acoustic enclosure
Fire-rated (listed) deep backcan
Medium round coverplate
91944
92337
901049
91688
92808
92335
112
119
120
125
128
118
1 pair
$32.00
5 pair
$66.50
5 pair
$36.50
each$90.00
each$50.00
1 pair
$17.50
Dealer Cost
Contractor SERIES Square speakers
• Weather resistant • Pivoting tweeter directs sound at
listeners for life-like stereo reproduction, even when
placement options are limited
SE R I ES
SPECIAL FEATURES Black baffles eliminate speaker cone
shadows through the grilles • Woofers are back-mounted on
the baffle for improved isolation from the local environment
CONT R ACTO R
C201SQ
SPECIFICATIONS
Tweeter:
¾" (19mm) cloth dome, pivoting
Woofer: 61∕ 2" (165mm) polypropylene cone with a rubber surround
Frequency Response: 60Hz – 20kHz ±3dB
Impedance: 8 ohms nominal, 6 ohms minimum
Power Handling: 5 watts minimum; 100 watts maximum
Sensitivity: 88dB SPL (2.83V/1meter)
Grille: Perforated aluminum
Dimensions (W x H x D): 811∕ 16" x 811∕ 16" x 3¼" (221mm x 221mm x 83mm)
Cut-Out Dims. (W x H): 7 3∕ 8" x 7 3∕ 8" (187mm x 187mm)
Shipping Weight: 8 lbs (3.6 kg) pair
PART#................. 91635
QUANTITY.......... PAIR
Contractor series Square speaker Accessories
Contractor Series
Contractor Series
Fire-rated (listed)
Contractor Series
Part #
square grille
square flex bracket
deep backcan
square fire-rated backcan
Page#
141215
112
91942
120
92808
128
91933†128
QTY
Dealer Cost
each$15.00
1 pair
$15.00
each$50.00
each$40.00
71
Accessory Matrix for contractor Series Speakers
contractor Series Speakers
speaker
Metal grilleFlex bracketmasonry bracketSTAPLE template
c201
c101
91943112
91943112
92336119
92336119
cR801
cR201
cR101
92013112
91944112
91944112
92247119
92337119
92337119
cR101sst
91944112
141215112
c201sq
72
part#page#
92066120
92066120
WOoD ACOUSTICFir
enclosure
900651120
900651120
91687124
91687124
--
--
--
--
901049
120
901049
120
91900
124
91688 125
91688 125
92337119
--
901049
91688 125
91942120
--
120
----
CFire-rated backcan
92807
92807
128
128
coverplate
92334118
92334118
92808128
92808
128
92808
128
92245118
92335118
92335118
92808
128
92335118
91933/92808
128/128--
c o n t r ac to r
SE R I ES
M AT R I X
73
CINEMA SERIES
Like you, we are incredibly avid movie fans. We know you’re on the edge of your seat for every explosion,
splash, crash, cry, scream and squeal. With Sonance Cinema® Series home theater solutions, music, special
effects, and dialogue are reproduced perfectly without cluttering your home theater. Sonance home theater
solutions deliver every whisper of sound and every note of the soundtrack with perfect clarity…just as it was
intended.
SONANCE Ci n e m a S e ri e s
THE ULTIMATE HOME THEATER EXPERIENCE The all-new Sonance Cinema Series speakers combine the aesthetic
appeal of the award winning Sonance Visual Performance Series and the reference performance quality of Sonance
speakers. Featuring high-gloss, integrated sealed enclosures and micro-trim grilles (0.20” of trim), the new Cinema
Series combines elegant, modern style with uncompromised in-wall home theater performance. Sonance Cinema
Series speakers seamlessly integrate into the designed space to transform almost any room into a movie theater. All
Cinema Series speakers are sonically matched for flexibility in home theater requirements whether in-wall, in-ceiling
or cabinet speaker installations.
cinema series in-wall speakers
SPECIAL FEATURES Carbon fiber/Rohacell® laminated
midrange and woofer drivers deliver state-of-the-art
performance and consistent sonic signature • Silk dome
tweeters provide the clearest possible highs • One-piece,
micro-trim, low-profile magnetic grille • Grille features
simple one-step paint process • Non-resonant, integrated
¾" MDF enclosures promote natural, uncolored sound
while minimizing sound spillover into adjacent rooms
• Die-cast aluminum woofer and midrange baskets
reduce resonances • Available in two configurations —
the LCR2 and SUR2 utilize four woofers for the largest
home theaters, while the LCR1 and SUR1 have two
woofers for home theater designs up to 3000 cubic feet.
cinema LCR2
SPECIFICATIONS
Tweeter: Midrange: C I NE M A SE R I ES
1" (25mm) silk dome, ferrofluid-cooled
4" (100mm) carbon fiber/Rohacell laminated cone with a
rubber surround
Woofer: Four 5¼" (133mm) carbon fiber/Rohacell laminated cones
with rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 200 watts maximum
Sensitivity: 92dB SPL (2.83V/1 meter)
Perforated steel
Grille: Dimensions (W x H x D): 87∕8" x 347∕8" x 37∕ 8" (225mm x 886mm x 98mm)
Cut-Out Dims. (W x H):
7½" x 33½" (191mm x 851mm)
Shipping Weight: 29 lbs (13.2kg) each
PART#................. 92497
QUANTITY.......... EACH
cinema SUR2
SPECIFICATIONS
Tweeter: Two 1" (25mm) silk domes, ferrofluid-cooled
Midrange: Two 3” (76mm) carbon fiber/Rohacell laminated cones with
rubber surrounds
Woofer: Four 5¼" (133mm) carbon fiber/Rohacell laminated cones
with rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 200 watts maximum
Sensitivity: 92dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 87∕8" x 347∕8" x 37∕ 8" (225mm x 886mm x 98mm)
Cut-Out Dims. (W x H): 7½" x 33½" (191mm x 851mm)
Shipping Weight: 29 lbs (13.2kg) each
PART#................. 92498
QUANTITY.......... EACH
75
sonance
cinema
series speakers
cinema series
in-wall
Cinema LCR1
SPECIFICATIONS
Tweeter: Midrange: PART#................. 92495
QUANTITY.......... EACH
1" (25mm) silk dome, ferrofluid-cooled
4" (100mm) carbon fiber/Rohacell laminated cone with a
rubber surround
Woofer: Two 5¼" (133mm) carbon fiber/Rohacell laminated cones with
rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
6 ohms nominal; 4 ohms minimum
Impedance: Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 87∕ 8" x 21¾" x 37∕8" (225mm x 553mm x 98mm)
Cut-Out Dims. (W x H): 7½" x 20½" (191mm x 521mm)
Shipping Weight: 19 lbs (8.6kg) each
cinema SUR1
SPECIFICATIONS
PART#................. 92496
QUANTITY.......... EACH
Tweeter: Two 1" (25mm) silk domes, ferrofluid-cooled
Midrange: Two 3” (76mm) carbon fiber/Rohacell laminated cones with
rubber surrounds
Woofer: Two 5¼" (133mm) carbon fiber/Rohacell laminated cones with
rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
5 watts minimum; 150 watts maximum
Power Handling: Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 87∕ 8" x 21¾" x 37∕8" (225mm x 553mm x 98mm)
Cut-Out Dims. (W x H): 7½" x 20½" (191mm x 521mm)
Shipping Weight: 19 lbs (8.6kg) each
sonance cinema lcr1, LCR2, sur1, SUR2 Accessories
Cinema
Cinema
Cinema
Cinema
LCR1/SUR1
LCR2/SUR2
LCR1/SUR1
LCR2/SUR2
grille
grille
Flex bracket
Flex bracket
Part #
Page#
QTY
92690
92691
92499
92500
113
113
121
121
each $32.00
each $38.00
each$25.00
each $40.00
Dealer Cost
NOTE: No enclosures needed — Sonance Cinema speakers feature integrated, sealed backboxes.
76
Ci n e m a S e ri e s I n - C e i l i n g Sp e a k e r s
cinema series in-CEILING speakers Sonance Cinema® Series in-ceiling speakers deliver film soundtracks and music
with reference clarity and realism, even in the largest home theater rooms. these all-new home theater speakers combine
elegant, modern style with uncompromised in-ceiling home theater performance. The all new micro-trim grilles, 0.20”
(5mm) of trim, give the Cinema Series a clean, sleek appearance that seamlessly integrates into any designed space.
Music, special effects, and dialogue are reproduced perfectly without cluttering your home theater with imposing speaker
boxes. Sonically matched to Cinema Series in-wall and cabinet speakers for installation flexibility.
cinema series in-ceiling speakers
cinema LCR1S
SPECIFICATIONS
Tweeter: 1" (25mm) silk dome, ferrofluid-cooled
4” (100mm) carbon fiber/Rohacell lam. cone, rubber surrounds
Midrange: Woofer: Two 5¼" (133mm) carb. fiber/Rohacell lam. cone, rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 1325∕32" x 1325∕32" x 79∕ 16" (350mm x 350mm x 192mm)
Cut-Out Dims. (W x H): 123∕ 8" x 123∕8" (314mm x 314mm)
Shipping Weight: 15 lbs (7.0kg) each
PART#................. 92810
QUANTITY.......... EACH
cinema SUR1S
SPECIFICATIONS
PART#................. 92811
QUANTITY.......... EACH
C I NE M A SE R I ES
Tweeter: Two 1" (25mm) silk domes, ferrofluid-cooled
Midrange: Two 3” (76mm) carb. fiber/Rohacell lam. cones, rubber surrounds
Woofer: Two 5¼" (133mm) carb. fiber/Rohacell lam. cones, rubber
surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 1325∕ 32" x 1325∕32" x 79∕ 16" (350mm x 350mm x 192mm)
Cut-Out Dims. (W x H): 123∕8" x 123∕8" (314mm x 314mm)
Shipping Weight: 15 lbs (7.0kg) each
cinema LCR.5S
SPECIFICATIONS
Tweeter: 1" (25mm) silk dome, ferrofluid-cooled
Midrange: 4” (100mm) polypropylene cone with rubber surround
Woofer: Two 5¼" (133mm) polypropylene cones, rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 125 watts maximum
Sensitivity: 88dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 1325∕32" x 1325∕32" x 79∕ 16" (350mm x 350mm x 192mm)
Cut-Out Dims. (W x H): 123∕ 8" x 123∕8" (314mm x 314mm)
Shipping Weight: 13 lbs (6.0kg) each
PART#................. 92809
QUANTITY.......... EACH
cinema SUR.5S
SPECIFICATIONS
Tweeter: 1" (25mm) silk dome, ferrofluid-cooled
Midrange: Two 3” (76mm) polypropylene cones with rubber surrounds
Woofer: Two 5¼" (133mm) polypropylene cones with rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 125 watts maximum
Sensitivity: 88dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 1325∕ 32" x 1325∕32" x 79∕ 16" (350mm x 350mm x 192mm)
Cut-Out Dims. (W x H): 123∕8" x 123∕8" (314mm x 314mm)
Shipping Weight: 13 lbs (6.0kg) each
PART#................. 92893
QUANTITY.......... EACH
77
SONANCE CINEMA IN-CEILING SPEAKER ACCESSORIES
Part #
Page#
QTY
Dealer Cost
Cinema LCR1S/SUR1S/LCR.5S/SUR.5S
ceiling square grille
92882
114 each$38.00
Cinema ceiling Flex bracket
92800
121 each$25.00
NOTE: No enclosures needed — Sonance Cinema speakers feature integrated, sealed backboxes.
Ci n e m a S e ri e s C a b i n e t Sp e a k e r s
cinema series cabinet speakers Sonance Cinema® Series Cabinet speakers deliver film soundtracks and music with reference
clarity and realism, even in the largest home theater rooms. these all-new home theater speakers combine elegant, modern style
with uncompromised home theater performance. Music, special effects, and dialogue are reproduced perfectly without cluttering
your home theater with imposing speaker boxes. The new Cinema Cabinet LCR is designed to provide outstanding performance
in a home theater system. The advanced custom-designed drivers, crossover and full MDF enclosure combine to reproduce wide
dynamic range film soundtracks and music with startling clarity and realism. Sonically matched to both Cinema in-wall and in-ceiling
speakers, the Cinema cabinets provide install flexibility when needed.
cinema series cabinet speaker
Cinema cabinet LCR1
SPECIFICATIONS
Tweeter: Midrange: PART#................. 92829
QUANTITY.......... EACH
1" (25mm) silk dome, ferrofluid-cooled
4" (100mm) carbon fiber/Rohacell laminated cone with a
rubber surround
Woofer: Two 5¼" (133mm) carbon fiber/Rohacell laminated cones with
rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
5 watts minimum; 150 watts maximum
Power Handling: Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Black cloth
Dimensions (W x H x D): 6" x 22" x 91∕16" (153mm x 559mm x 230mm)
Shipping Weight: 25 lbs (11.4kg) each
sonance cabinet speaker Accessories
78
Part #
Page#
Cinema Cabinet LCR1 grille
92883
114 each$24.00
QTY
Dealer Cost
Ci n e m a S e ri e s Su b w o o f e r s
Cinema Series Subwoofers New Cinema Series In-Wall Subwoofer line offers true home theater performance in a
package that will fit in normal 2' x 4' stud walls. Available in 12" woofer / 500 watt and 10" woofer / 250 watt models.
The Cinema In-Wall Subwoofer systems are sold in three pieces for easy installation stage ordering; in-wall enclosure,
woofer driver/grille and separate amplifier.
cinema series in-wall subwoofers
Sonance Cinema Series In-Wall Subwoofers feature an innovative low-profile driver with an ultra low distortion motor
and 4” diameter voice coil. Dual central mount spiders are used to maximize the movement of the laminated carbon
fiber honeycomb woofer cone. Features Visual Performance micro-trim grille. The new In-Wall Subwoofers are a perfect
complement to Cinema Series In-Wall, In-Ceiling and Cabinet theater installations.
Cinema Sub12-500
SPECIFICATIONS
Woofer
Frequency Response
Impedance
Sensitivity
Grille
Requirement
PART#................. 92873
QUANTITY.......... EACH
C I NE M A SE R I ES
Dimensions Woofer (WxHxD)
Dimensions Grille (WxHxD)
12" (305mm) laminated carbon fiber cone, rubber surround
25Hz - 250Hz ±3dB
8 ohms nominal
90dB (2.83V/1) meter
Perforated steel
Requires Cinema SUB12-500 acoustic enclosure and Cinema
SUB12-500D amplifier, each sold separately.
123∕8" x 123∕8" x 35∕ 32" (314mm x 314mm x 80.2mm)
15" x 15" x 5∕32" (381mm x 381mm x 4mm)
Cinema Sub10-250
SPECIFICATIONS
Woofer:
Frequency Response:
Impedance:
Sensitivity:
Grille:
Requirement:
Dimensions Woofer (WxHxD):
Dimensions Grille (WxHxD):
10" (254mm) laminated carbon fiber cone with a rubber
surround
30Hz - 250Hz ±3dB
8 ohms nominal
88dB (2.83V/1) meter
Perforated steel
Requires Cinema SUB10-250 acoustic enclosure, sold
separately. Requires Cinema SUB10-250D amplifier, sold
separately.
107∕16" x 107∕16" x 35∕32" (265mm x 265mm x 80.2mm)
131∕16" x 131∕16" x 5∕32" (332mm x 332mm x 4mm)
PART#................. 92872
QUANTITY.......... EACH
sonance CINEMA Series In-Wall Subwoofer Accessories
Part #
Page#
Grille for in-wall 12-500 subwoofer
Grille for in-wall 10-250 subwoofer
92895
92894
113 each$24.00
113 each$20.00
QTY
Dealer Cost
79
Ci n e m a S e ri e s I n -W a l l Su b w o o f e r E n c l o s ur e s
cinema series in-wall subwoofer enclosures feature a combination of ½" and 1" MDF materials for superior isolation of
bass; extruded aluminum bracing for minimal obstruction of airflow inside the enclosure; mass damping of front and back walls
of enclosure; long-strand fiberglass internal damping for standing wave dissipation; dual positive and negative terminals for
maximum wire durability; floating enclosure design minimizes vibration transfer to adjoining rooms; fits in standard 2x4 stud bay;
blank pre-construction plate for easy installation.
Extruded aluminum vertical braces
Dual-layer mass damping applied to
front and back panels
Multiple-thickness MDF enclosure
Front and back ½” (13mm)
Sides, top and bottom 1” (25mm)
Steel mounting rails
cinema series in-wall subwoofer Enclosures
Sonance Cinema SUB12-500 Enclosure
SPECIFICATIONS
Internal Volume
Material
PART#................. 92875
QUANTITY.......... EACH
1.20 cubic feet (34.3 liters) of volume
MDF wood box with long strand fiberglass acoustic
dampening material
CompatibilityFits the Sonance Cinema SUB12-500 only
Enclosure Dimensions (WxHxD) 141∕ 4" x 707∕8" x 37∕16" (362mm x 1800mm x 87mm)
Mounting Depth
33∕ 8” (85.7mm)
Mounting Bracket Width
161∕ 4” (409.5mm)
Hardware
Integrated L-bracket mounting system included
Sonance Cinema SUB10-250 Enclosure
SPECIFICATIONS
PART#................. 92874
QUANTITY.......... EACH
80
Internal Volume.80 cubic feet (22.6 liters) of volume
Material
MDF wood box with long strand fiberglass acoustic
dampening material
CompatibilityFits the Sonance Cinema SUB10-250 only
Enclosure Dimensions (WxHxD) 141∕ 4" x 471∕4" x 37∕ 16" (362mm x 1200mm x 87mm)
Mounting Depth
33∕8” (85.7mm)
Mounting Bracket Width
161∕4” (409.5mm)
Hardware
Integrated L-bracket mounting system included
cinema series Amplifiers
Sonance Cinema In-Wall SUB12-500D Amplifier
SPECIFICATIONS
Output Power RMS: PART# (120V)..... 92877
PART# (230V)..... 92879
QUANTITY.......... EACH
H O M E T H EATE
C I NERM A SE
C I NE
R I ES
M A ® SE R I ES
400 Watts @ 8 ohms (1% THD, 26hz)
660 Watts @ 4 ohms (1% THD, 26hz)
Output Power Peak: 446 Watts @ 8 ohms (4% THD, 26hz)
776 Watts @ 4 ohms (6% THD, 26hz)
AC Fuse: 120v Model - 12 amp (T12A ~ 250V)
230v Model - 8 amp (T8A ~ 250V)
AC Power Consumption:
985w @ 4 ohms (sine wave, full power)
564w @ 4 ohms (music, full power)
45w idle (no signal)
Heat Output:
183 BTU/HR @ 8 ohms (music, full power)
285 BTU/HR @ 4 ohms (music, full power)
Signal-to-Noise Ratio:
-95dB (w/22kHz A-wtg. filter)
Line Input Impedance: 600 ohms
Line Output Impedance:
600 ohms
Auto-On Trigger Sensitivity:
7.0mV LFE Line Input
3.5mV Stereo Line Input
Low-Pass Crossover Freq
(BYPASS Switch OFF): 50Hz ~ 150Hz (variable), 12dB/octave
Low-Pass Crossover Freq
(BYPASS Switch ON): 250Hz (fixed), 12dB/octave
-3dB @ 150Hz, 6dB/octave
Hi Level Out Hi-Pass Filter:
Line Level Out Hi-Pass Filter: -3dB @ 150Hz, 6dB/octave
Controls: Variable crossover freq and output level, phase switch,
bypass switch
Dimensions (W x H x D):
163∕4" x 37∕8" x 131∕ 2" (425mm x 98mm x 343mm)
RMF Dimensions (W x H x D):
19" x 37∕8" x 131∕2" (483mm x 98mm x 343mm)
Rack Space Requirement:
2U, Rack ears included
Certifications:ETL, CE, C-Tick, FCC
Shipping Weight:
19 lbs (8.6kg) each
Sonance Cinema In-Wall SUB10-250D Amplifier
SPECIFICATIONS
Output Power RMS: Output Power Peak: AC Fuse: AC Power Consumption:
Heat Output:
Signal-to-Noise Ratio: Line Input Impedance: Line Output Impedance:
Auto-On Trigger Sensitivity: Low-Pass Crossover Freq
Low-Pass Crossover Freq
Hi Level Out Hi-Pass Filter: Line Level Out Hi-Pass Filter: Controls: 230 Watts @ 8 ohms (1% THD, 32hz)
370 Watts @ 4 ohms (1% THD, 32hz)
260 Watts @ 8 ohms (7% THD, 32hz)
470 Watts @ 4 ohms (8% THD, 32hz)
120v Model - 8 amp (T8A ~ 250V)
230v Model - 6.3 amp (T6.3A ~ 250V)
588w @ 4 ohms (sine wave, full power)
396w @ 4 ohms (music, full power)
22w idle (no signal)
102 BTU/HR @ 8 ohms (music, full power)
183 BTU/HR @ 4 ohms (music, full power)
-95dB (w/22kHz A-wtg. Filter)
600 ohms
600 ohms
7.0mV LFE Line Input
3.5mV Stereo Line Input
(BYPASS Switch OFF): 50Hz ~ 150Hz (variable), 12dB/octave
(BYPASS Switch ON): 250Hz (fixed), 12dB/octave
-3dB @ 150Hz, 6dB/octave
-3dB @ 150Hz, 6dB/octave
Variable crossover freq and output level, Phase switch,
Bypass switch
Dimensions (W x H x D):
163∕4" x 37∕8" x 131∕2" (425mm x 98mm x 343mm)
RMF Dimensions (W x H x D):
19" x 37∕8" x 131∕ 2" (483mm x 98mm x 343mm)
Rack Space Requirement:
2U, Rack ears included
Certifications:ETL, CE, C-Tick, FCC
Shipping Weight:
19 lbs (8.6kg) each
PART# (120V)..... 92876
PART# (230V)..... 92878
QUANTITY.......... EACH
81
cINEMA sERIES In-wall Subwoofer System Packages
CINEMA SUB12-500
IN-WALL SYSTEM
PART# (120V)..... 92896
QUANTITY.......... EACH
PART# (230V)..... 92899
QUANTITY.......... EACH
CINEMA SUB10-250
IN-WALL SYSTEM
PART# (120V)..... 92897
QUANTITY.......... EACH
PART# (230V)..... 92898
QUANTITY.......... EACH
82
Cinema Series In-wall Subwoofer System Packages
Complete in-wall subwoofer systems. Includes two in-wall woofers, two in-wall enclosures, and
one amplifier capable of driving both woofers. Available for both 12-500 and 10-250 systems
in 120V or 230V. Specifications are listed under the individual system components on previous
pages..
Ci n e m a S e ri e s Su b w o o f e r s
Cinema Series Subwoofers deliver film soundtracks and music with reference clarity and realism, evedeliver
powerful, low-distortion bass in any room. Anodized aluminum woofer cones combine with heavily-braced sealed
enclosures to deliver room-shaking bass.
cinema series cabinet subwoofers
SUB12–250 cabinet subwoofer
SPECIFICATIONS
Woofer:
12” (305mm) anodized aluminum cone with a rubber
surround
Frequency Response:
22Hz - 250Hz ±3dB
Amplifier Power: 250 watts
Inputs:Line-level and speaker-level
Outputs:
High-pass filtered line-level and speaker-level
Grille:Black cloth
Cabinet Finish:
High-gloss black
Adjustments:Front-accessible level, crossover, phase and bypass
Dimensions (W x H x D):
15" x 18" x 16" (381mm x 457mm x 406mm)
Shipping Weight:
70 lbs (31.5kg) each
PART# (120V)..... 92365
PART# (230V)..... 92368
QUANTITY.......... EACH
SUB10–150 cabinet subwoofer
SPECIFICATIONS
10" (254mm) anodized aluminum cone with a rubber
surround
Frequency Response:
28Hz - 250Hz ±3dB
Amplifier:
150 watts
Inputs:Line-level and speaker-level
Outputs:
High-pass filtered line-level and speaker-level
Grille:Black cloth
Cabinet Finish:
High-gloss black
Adjustments:Front-accessible level, crossover, phase and bypass
Dimensions (W x H x D):
14" x 16" x 14" (355mm x 406mm x 355mm)
Shipping Weight:
60 lbs (27kg) each
PART# (120V)..... 92364
PART# (230V)..... 92367
QUANTITY.......... EACH
C I NE M A SE R I ES
Woofer:
SUB8–100 cabinet subwoofer
SPECIFICATIONS
Woofer:
8" (203mm) anodized aluminum cone with a rubber surround
Frequency Response:
35Hz - 250Hz ±3dB
Amplifier:
100 watts
Inputs:Line-level and speaker-level
Outputs:
High-pass filtered line-level and speaker-level
Grille:Black cloth
Cabinet Finish:
High-gloss black
Adjustments:Front-accessible level, crossover, phase and bypass
Dimensions (W x H x D):
12" x 14" x 12" (305mm x 355mm x 305mm)
Shipping Weight:
40 lbs (18kg) each
PART# (120V)..... 92363
PART# (230V)..... 92366
QUANTITY.......... EACH
sonance cabinet subwoofer Accessories
Part #
Page#
QTY
Dealer Cost
SUB12-250 Cabinet Subwoofer grille
142662
116 each$26.00
SUB10-150 Cabinet Subwoofer grille142661117 each$24.00
SUB8-100 Cabinet Subwoofer grille
142660
117 each$22.50
83
visual Performance series medium home theater speakers
VP67 lcR — surround
SPECIFICATIONS
PART#................. 92724
QUANTITY.......... EACH
Tweeter:
1" (25mm) aluminum dome, ferrofluid-cooled
Woofer:Two 6½" (165mm) coated carbon fiber cones with rubber
surrounds, extended pole pieces
Frequency Response:
43Hz – 20kHz ±3dB
Impedance:6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 140 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Adjustments:
±3dB tweeter level
Grille:
Perforated steel
Grille Dims. (W x H x D):
161∕8" x 83∕8" x 39∕16" (410mm x 213mm x 91mm)
Cut-Out Dims. (W x H):
67∕8" x 14½" (175mm x 368mm)
Shipping Weight:
8 lbs (3.6kg) each
VP85R SUR
SPECIFICATIONS
PART#................. 92867
QUANTITY.......... PAIR
Tweeter:Two 1" (25mm) silk domes, ferrofluid-cooled
Midrange: Two 3" (76mm) carbon fiber cones, rubber surrounds
Woofer: 8" (203mm) carbon fiber cone, rubber surround, pivoting
Frequency Response: 36Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
5 watts minimum; 150 watts maximum
Power Handling: Sensitivity: 91dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (Diam. x D):
115∕ 8" x 57∕ 8" (295mm x 149mm)
Cut-Out Diameter:
101∕ 8" (257mm)
Shipping Weight: 20 lbs (9.0kg) pair
VP65r SUR — surround
SPECIFICATIONS
PART#................. 92732
QUANTITY.......... PAIR
Tweeter:Two 1" (25mm) silk domes, ferrofluid-cooled, in acoustic
back chamber
Woofer:6½" (165mm) carbon fiber cone with a rubber surround
Frequency Response:
44Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 130 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated steel
Dimensions (Dia. x D):
93∕4" x 4¾" (248mm x 121mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
5 lbs (2.3kg) pair
VP65S SUR — surround
SPECIFICATIONS
PART#................. 92733
QUANTITY.......... PAIR
Tweeter: Two 1" (25mm) silk dome, ferrofluid-cooled, in acoustic back
chamber
Woofer: 6½" (165mm) carbon fiber cone, with a rubber surround,
pivoting
Frequency Response: 44Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum; 130 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille: Perforated steel
Dimensions (W x H x D): 9 7/8" x 9 7/8” x 4¾" (251mm x 251mm x 121mm)
Cut-Out Dims. (W x H): 8¼" x 8¼" (210mm x 210mm)
Shipping Weight: 10 lbs (4.5kg) pair
VISUAL PERFORMANCE SERIES MEDIUM HOME THEATER SPEAKER ACCESSORIES
Please see pages 27, 29, 31, and 32 for a list of accessories for these speakers.
84
Origi n a l S e ri e s H o m e Th e at e r Sp e a k e r s
original series ELLIPSE® SPEAKERS provide tremendous performance and flexibility for in-ceiling home theater
installations. Ellipse LCR speakers feature a pivoting Sonic Eye that allows the critical frequencies required for spatial
localization to be directed toward the listening position, eliminating the perceived “out-of-sync” between picture and
sound that occurs when using conventional in-ceiling speakers in home theater applications.
original series ellipse in-ceiling speakers
ELLIPSE IN-CEILING THEATER Sonance Ellipse speakers
provide tremendous performance and flexibility for
in-ceiling home theater installations. Ellipse LCR speakers
feature a pivoting Sonic Eye that allows the critical
frequencies required for spatial localization to be directed
toward the listening position, eliminating the perceived
“out-of-sync” between picture and sound that occurs
when using conventional in-ceiling speakers in home
theater applications.
SPECIAL
FEATURES
Innovative
elliptical
footprint • Midrange and tweeter Sonic Eye
pivots up to 20 degrees in LCR model • Tweeter
incorporates a lens for superior off-axis response
• 6½" woofers reproduce bass down to below 50Hz,
allowing for an extremely low crossover point from the
ceiling speakers to the subwoofer • Graphite-Reinforced
ABS (GRABS) woofer baskets • Dual midrange/tweeter
array in Ellipse SUR creates a diffuse, enveloping
soundfield
ELLIPSE 1.0 LCR
SPECIFICATIONS
PART#................. 91902
QUANTITY.......... EACH
c i n e m a s e ri e s
1
Tweeter: ∕ 2" (13mm) cloth dome, pivoting
Midrange: 4" (102mm) polypropylene cone, pivoting
Woofer: 61∕ 2" (165mm) black woven glass fiber cone with a rubber
surround
Frequency Response: 50Hz – 20kHz ±3dB
Sensitivity: 89dB (2.83V/1 meter)
Power Handling: 5 watts minimum; 125 watts maximum
8 ohms nominal, 6 ohms minimum
Impedance: Grille: Perforated aluminum
Dimensions (W x H x D): 101∕2" x 15½" x 5 7∕8" (267mm x 394mm x 149mm)
Cut-Out Dims. (W x H): 9" x 13 7∕8 (229mm x 353mm) elliptical
Shipping Weight: 8 lbs (3.6kg) each
ELLIPSE SUR
SPECIFICATIONS
Tweeter: Two 1∕ 2" (13mm) cloth domes
Midrange: Two 3" (76mm) black woven glass fiber cones with rubber
surrounds
Woofer: 61∕ 2" (165mm) black woven glass fiber cone with a rubber
surround
Frequency Response: 50Hz – 20kHz ±3dB
Sensitivity: 90dB (2.83V/1 meter)
Power Handling: 5 watts minimum; 125 watts maximum
Impedance: 8 ohms nominal, 6 ohms minimum
Grille: Perforated aluminum
Dimensions (W x H x D): 101∕ 2" x 15½" x 41∕ 2" (267mm x 394mm x 114mm)
Cut-Out Dims. (W x H): 9" x 13 7∕ 8” (229mm x 353mm) elliptical
Shipping Weight: 16 lbs (7.3kg) pair
PART#................. 91961
QUANTITY.......... PAIR
sonance Ellipse Accessories
Ellipse
Ellipse
Ellipse
Ellipse
Ellipse
LCR grille
SUR grille
wood acoustic enclosure
Flex bracket
coverplate
Part #
Page#
QTY
92009
92010
91921
91922
91974
115
115
126
122
118
each$17.50
1 pair
$34.50
each$88.50
each$12.00
each$11.00
Dealer Cost
85
Ci n e m a S e l e c t Sp e a k e r s
THX accuracy for smaller spaces Sonance Cinema Select speakers deliver THX-certified cinema performance that is ideal
for smaller home theater rooms (up to 2,000 cubic feet, with seating 10 – 12 feet from the screen). In addition to faithfully
reproducing multi-channel film soundtracks as their creators intended them to sound, Cinema Select speakers perform just
as impressively when playing music. Paintable aluminum grilles and a small footprint let them practically disappear into
the décor.
cinema select speakers
SPECIAL FEATURES Voiced for a precise tonal match with
their corresponding in-wall versions • Exclusive ½" MDF /
½" particle board laminate cabinet material offers superior
stiffness and resonance damping • 1" MDF baffle and rear
panels • THX-certified models have a woofer boundary
compensation switch for smoother response when mounted
on TVs or in furniture
Cinema select LCR
SPECIFICATIONS
Tweeter:
Woofer:
PART#................. 92332
QUANTITY.......... EACH
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Grille:
Dimensions (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight:
1" (25mm) silk dome, ferrofluid-cooled, shielded magnet
6½" (165mm) carbon fiber cone, rubber surround,
shielded magnet
80Hz – 20kHz ±3dB
8 ohms nominal; 5 ohms minimum
5 watts minimum; 135 watts maximum
90dB SPL (2.83V/1 meter)
Perforated aluminum
81∕4" x 123∕ 16" x 33∕ 8" (210mm x 310mm x 86mm)
615/16" x 10¾" (176mm x 273mm)
5 lbs (2.3kg) each
Cinema select SUR
SPECIFICATIONS
PART#................. 92333
QUANTITY.......... PAIR
Tweeter:Two 1" (25mm) silk domes, ferrofluid-cooled
6½" (165mm) carbon fiber cone, rubber surround
Woofer:
Frequency Response:
55Hz – 20kHz ± 3dB
Impedance:
8 ohms nominal; 5 ohms minimum
5 watts minimum; 135 watts maximum
Power Handling:
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (W x H x D):
81∕4" x 123∕ 16" x 33∕ 8" (210mm x 310mm x 86mm)
Cut-Out Dims. (W x H):
615/16" x 10¾" (176mm x 273mm)
Shipping Weight:
10 lbs (4.5kg) pair
CINEMA SELECT LCR CABINET SPEAKER
SPECIFICATIONS
PART#................. 92119
QUANTITY.......... EACH
Tweeter:1" (25mm) silk dome, ferrofluid-cooled, shielded magnet
Woofer:61∕ 2" (165mm) carbon fiber cone with a rubber surround,
shielded magnet
Frequency Response:
80Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 5 ohms minimum
Power Handling:
5 watts minimum; 135 watts maximum
Sensitivity:
90dB SPL (2.83V/1 meter)
Cabinet Material:1" MDF (baffle and rear panel); ½" MDF / ½" particleboard
laminate (top, bottom, and sides)
Grille/Cabinet finish:Black cloth/Black
Adjustments:
±3dB tweeter level, boundary compensation
Dimensions (W x H x D):
71∕ 2" x 11" x 111∕ 2" (191mm x 279mm x 292mm)
Shipping Weight:
18 lbs (8.2kg) each
sonance CINEMA SELECT Accessories
86
Part #
Page#
QTY
Cinema Select metal grille
Medium rectangle Flex bracket
Medium rectangle wood acoustic enclosure
Medium rectangle staple template
Medium rectangle coverplate
Fire-rated (listed) shallow backcan
92100
92336
91687
900651
92334
92807
110
119
124
120
118
128
1 pair
$32.00
5 pair
$66.50
each$90.00
5 pair
$36.50
1 pair
$17.50
each$50.00
Dealer Cost
Original Series Home Theater Speakers
623 LCR
SPECIFICATIONS
Tweeter: 1” (25mm) silk dome, ferrofluid-cooled
Woofer: Two 6½” (165mm) carbon fiber cones with rubber surrounds
Frequency Response: 43Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
Impedance: Power Handling: 5 watts minimum; 135 watts maximum
Sensitivity: 92dB SPL (2.83V/1 meter)
Perforated aluminum
Grille: Adjustments: ±3dB tweeter level
Dimensions (W x H x D): 16” x 8¼” x 3½" (407mm x 210mm x 89mm)
Cut-Out Dims. (W x H): 6 7/8” x 14½” (175mm x 368mm)
Shipping Weight: 8 lbs (3.6kg) each
PART#................. 92473
QUANTITY.......... EACH
623r SUR
SPECIFICATIONS
PART#................. 92328
QUANTITY.......... PAIR
c i n e m a s e ri e s
Tweeter:Two 1" (25mm) silk domes, ferrofluid-cooled
Woofer:61∕ 2" (165mm) carbon fiber cone with a rubber surround
Frequency Response:
55 Hz – 20 kHz ±3dB
Sensitivity:
90dB SPL (2.83V/1 meter)
Power Handling:
5 watts min; 150 watts max
Impedance:
8 ohms nominal; 7 ohms minimum
Grille:
Perforated aluminum
Dimensions (Dia. x D):
9 3∕ 4" x 5 3∕ 16" (248mm x 132mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
11 lbs (5.0kg) pair
ORIGINAL SERIES 623 LCR CABINET SPEAKER*
SPECIFICATIONS
Tweeter:1" (25mm) aluminum dome, magnetically- shielded
Woofer:Two 61∕ 2" (165mm) black glass composite cones with rubber
surrounds, magnetically-shielded
Frequency Response:
45Hz – 20kHz ±3dB
Impedance:
6 ohms nominal; 4.5 ohms minimum
Power Handling:
5 watts minimum; 150 watts maximum
Sensitivity
90dB SPL (2.83V/1 meter)
Grille Material:Black cloth
Finish:Black
Dimensions (W x H x D):
223∕4" x 71∕ 2" x 113∕ 8" (578mm x 191mm x 289mm)
Shipping Weight:
25 lbs (11.3kg) each
PART#................. 91639
QUANTITY.......... EACH
*While supplies last
sonance cabinet speaker Accessories
Part #
Page#
Cinema Select LCR/Symphony S622c
Cabinet Speaker grille
QTY
Dealer Cost
701114
116 each$22.00
87
Accessory Matrix for Cinema Series Speakers
Cinema series In-Wall Speakers
speaker
Metal grille
cloth grilleFlex bracket
part#page#
LCR1 / SUR1
LCR2 / sur2
92690
92691
113
113
--
--
92499121
92500121
Cinema series In-Ceiling Speakers
speaker
Metal grille
cloth grilleFlex bracket
part#page#
LCR1S/.5S/SUR1S/.5S92882114
--
92800121
Cinema series In-Wall Woofers
speaker
grille
enclosure
Amplifier
part#page#
Cinema Sub12-500
Cinema Sub10-250
92895
92894
113
113
92875
92874
126
80
92877
92876
81
81
Cabinet subwoofers
speakermetal grille
cloth grille
part#page#
SUB12-250
SUB10-150
SUB8-100
--
--
--
142662116
142661117
142660117
ellipse series Speakers
speaker
Metal grille
cloth grilleFlex bracketSTAPLE templatew
part#page#
ellipse 1.0 lcr
Ellipse Sur
92009
92010
115
115
--
--
91922122
91922122
--
--
Cinema Select Speakers
speaker
Metal grille
cloth grilleFlex bracketSTAPLE templatew
part#page#
Cinema Select LCR
Cinema Select SUR
92100
92100
110
110
--
--
92336
92336
119
119
900651120
900651120
cabinet Speakers
speakermetal grille
cloth grilleFlex bracketSTAPLE templatew
part#page#
Cinema LCR1
Cinema Select LCR
Symphony 623 LCR
88
--
--
--
92883 114--
701114 116--
700493 116--
--
--
--
C I NE M A
SE R I ES
M AT R I X
wood acoustic enclosure
91921126
91921126
wood acoustic enclosure
91687 124
91687 124
wood acoustic enclosure
--
--
--
fire-rated backcan
--
--
fire-rated backcan
coverplatemasonry bracketvapor barrier
91974118--
91974118--
coverplatemasonry bracketvapor barrier
9280712892334 118
9280712892334 118
fire-rated backcan
--
--
--
---
92066120-92066120--
coverplatemasonry bracketvapor barrier
--
--
--
--
--
--
----
89
OUTDOOR Series
Sonance Outdoor Series offers the ideal product portfolio to fulfill the rapidly growing demand for outdoor
entertainment in high-end residences. With designs and materials tailored to meet the rigorous demands of
open-air applications, Outdoor Series brings the superior look and sound of Sonance to the great outdoors.
Under the eaves, around the barbeque, by the pool, and in the garden, Sonance Outdoor Series has the
right solution for every element of your outdoor audio installation.
S o n a n c e E x t r e m e S e ri e s Sp e a k e r s
sonance EXTREME series From the dry heat of a sauna, to the humidity of a shower stall, Sonance Extreme Series
speakers know no placement boundaries. They’re right for highly humid areas and are built to survive extreme
temperatures while maintaining superior sound quality. Extreme Series speakers are also shock-resistant and can
withstand the pelting of the high seas and salty air, making them an excellent choice for marine applications. Sonance
Extreme Series speakers are available in both Visual Performance Series and Original Series.
visual performance series extreme speakers
SPECIAL FEATURES One-piece, nearly trimless, lowprofile powder-coated stainless steel magnetic
grille • Simplified one-step grille painting process
• Small footprint increases installation options •
Polyurethane tweeters, injection-molded polypropylene/
graphite woofers and stainless steel grilles ensure that the
speakers remain rust-free • All exposed plastic parts are
made of durable, high-temperature materials • Baffle
O-ring gasket and neoprene frame gasket make these
speakers watertight and enhance the moisture barrier
• Superior sound quality for high-humidity areas •
Built to withstand temperature extremes from –30°F to
+175°F (–34.4° C to +79.4° C)
VP65 XT — extreme
SPECIFICATIONS
PART#................. 92751
QUANTITY.......... PAIR
SE R I ES
VP65R XT — extreme
SPECIFICATIONS
Tweeter:
1" (25mm) polyurethane dome
Woofer:6½" (165mm) injection-molded polypropylene/graphite
cone, with integral Santoprene surround
Frequency Response:
55Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 130 watts maximum
Sensitivity:
89dB SPL (2.83V/1 meter)
Grille:
Powder-coated stainless steel
Dimensions (Dia. x D):
93∕4" x 4" (248mm x 102mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
12 lbs (5.4kg) pair
O U TDOO R
Tweeter:1" (25mm) polyurethane dome
Woofer:61∕ 2" (165mm) injection-molded polypropylene/graphite,
with integral Santoprene surround
Frequency Response:
55Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
5 watts minimum; 130 watts maximum
Power Handling:
Sensitivity:
89dB SPL (2.83V/1 meter)
Grille:
Powder-coated stainless steel
Dimensions (W x H x D):
8¼" x 12 3∕ 16" x 2½" (210mm x 310mm x 64mm)
Cut-Out Dims. (W x H):
6 15∕ 16" x 10¾" (176mm x 273mm)
Shipping Weight:
12 lbs (5.4kg) pair
PART#................. 92752
QUANTITY.......... PAIR
VP65S XT — extreme
SPECIFICATIONS
Tweeter:
1" (25mm) polyurethane dome
Woofer:6½" (165mm) injection-molded polypropylene/graphite
cone, with integral Santoprene surround
Frequency Response:
55Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 130 watts maximum
Sensitivity:
89dB SPL (2.83V/1 meter)
Grille:
Powder-coated stainless steel
Dimensions (W x H x D):
97∕8" x 97∕ 8" x 3½" (251mm x 251mm x 89mm)
Cut-Out Dims. (W x H):
8¼" x 8¼" (210mm x 210mm)
Shipping Weight:
12 lbs (5.4kg) pair
PART#................. 92835
QUANTITY.......... PAIR
91
visual performance series extreme speakers
VP65R SST XT — single stereo technology extreme
SPECIFICATIONS
PART#................. 92753
QUANTITY.......... EACH
Tweeter:Two 1" (25mm) polyurethane domes
Woofer:6½" (165mm) injection-molded polypropylene/graphite cone,
with integral Santoprene surround
Frequency Response:
55Hz – 20kHz ±3dB
Impedance:8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 600 watts maximum
Sensitivity:
89dB SPL (2.83V/1 meter)
Grille:
Powder-coated stainless steel
Dimensions (Dia. x D):
93∕4" x 5 3/16" (248mm x 132mm)
Cut-Out Diameter:
8¼" (210mm)
Shipping Weight:
4.5 lbs (2.1kg) each
original series extreme speakers
SPECIAL FEATURES Polyurethane tweeters, aluminum woofers
and stainless steel grilles ensure that the speakers remain rustfree • All exposed plastic parts are made of durable, hightemperature materials • Baffle O-ring gasket and neoprene
frame gasket make these speakers watertight and enhance the
moisture barrier • Superior sound quality for high-humidity areas
• Built to withstand temperature extremes from –30°F to +175°F
(–34.4° C to +79.4° C)
EXTREME XT
SPECIFICATIONS
PART#................. 91636
QUANTITY.......... PAIR
Tweeter: 1" (25mm) polyurethane dome
Woofer: 61∕ 2" (165mm) one-piece black anodized aluminum cone with a
Santoprene surround
Frequency Response: 55Hz – 20kHz ±3dB
Impedance: 8 ohms nominal, 6 ohms minimum
5 watts minimum; 60 watts maximum
Power Handling: Sensitivity: 89dB SPL (2.83V/1 meter)
Powder-coated stainless steel
Grille: Dimensions (W x H x D):
8¼" x 12 3∕ 16" x 21∕ 2" (210mm x 310mm x 63.5mm)
Cut-Out Dims. (W x H): 615∕16" x 10¾" (176mm x 273mm)
Shipping Weight: 9 lbs (4.1kg) pair
EXTREME XTR
SPECIFICATIONS
PART#................. 91637
QUANTITY.......... PAIR
Tweeter: 1" (25mm) polyurethane dome
Woofer: 61∕ 2" (165mm) one-piece black anodized aluminum cone with a
Santoprene surround
Frequency Response: 55Hz – 20kHz ±3dB
Impedance: 8 ohms nominal, 6 ohms minimum
Power Handling: 5 watts minimum; 60 watts maximum
Sensitivity: 89dB SPL (2.83V/1 meter)
Grille: Powder-coated stainless steel
Dimensions (Dia x D): 9 3∕4" x 4" (248mm x 102mm)
Cut-Out Diameter: 8¼" (210mm)
Shipping Weight: 9 lbs (4.1kg) pair
EXTREME XSSTR - Single Stereo Technology
SPECIFICATIONS
PART#................. 91638
QUANTITY.......... EACH
92
Tweeter: Two 1" (25mm) polyurethane domes
Woofer: 61∕ 2" (165mm) dual voice coil, one piece black
anodized aluminum cone with a Santoprene surround
Frequency Response: 55Hz – 20kHz ±3dB
Impedance: 8 ohms nominal, 6 ohms minimum
Power Handling: 5 watts minimum; 60 watts maximum
Sensitivity: 89dB SPL (2.83V/1 meter)
Grille: Powder-coated stainless steel
Dimensions (Dia x D): 9 3∕4" x 5 3∕ 16" (248mm x 132mm)
Cut-Out Diameter: 8¼" (210mm)
Shipping Weight: 41∕ 2 lbs (2.1kg) each
sonance Visual Performance extreme and original series extreme Accessories
SONANCE
SERIES Part #
Page#
QTY
Dealer Cost
®
Visual Performance Extreme rectangle grille
Visual Performance Extreme square grille
Visual Performance Extreme round grille
Original Series Extreme XT rectangle grille
Original Series Extreme XTR/XSSTR grille
Medium rectangle wood acoustic enclosure
Medium round wood acoustic enclosure
Fire-rated (listed) shallow backcan
Fire-rated (listed) deep backcan
Vapor barrier
92812
92814
92813
92212
92213
91687
91688
92807
92808
91703
110
110
110
111
111
124
125
128
128
129
each$60.00
each$45.00
each$60.00
1 pair
$45.00
1 pair
$45.00
each$90.00
each$90.00
each$50.00
each$50.00
12 pair
$225.00
Note: See the Accessory Matrix on page 98 for a complete listing of accessories and compatibility information.
S o n a n c e M a ri n e r S e ri e s
MARINER INDOOR/OUTDOOR SPEAKERS Sonance Mariner® outdoor speakers bring together high musical
performance and more installation options than ever before. Featuring our exclusive FastMount bracket system
and Protected Access Connection Terminal (PACT) connector termination system that increases moisture resistance, the
eight models in the Mariner Series feature tough, paintable, sealed polypropylene enclosures and perforated aluminum
grilles that enhance their weather resistance. For installations in areas with severe weather, Mariner Extreme kits
featuring a stainless steel grille and FastMount bracket are available.
sonance mariner series speakers
across a corner or on poles • Push-and-lock speaker
installation eliminates clumsy threaded knobs • Included
bracket base assembly allows speaker to pivot in the
direction parallel to the bracket • PACT system increases
moisture resistance with a grommetted rear wire entry
port and a covered front wire connector • All models are
available in both black and white
SE R I ES
MARINER 82
SPECIFICATIONS
Tweeter:
1" (25mm) polyurethane dome
Woofer:8" (203mm) one-piece black polypropylene cone with a
rubber surround
Frequency Response:
45Hz – 20kHz ±3dB
Impedance:
6 ohms nominal; 4 ohms minimum
Power Handling:
5 watts minimum; 125 watts maximum
Sensitivity:
91dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (W x H x D):
9" x 14" x 91∕4" (229mm x 356mm x 235mm)
Shipping Weight:
20 lbs (9.0kg) pair
O U TDOO R
SPECIAL FEATURES Family of eight different models
meets any outdoor entertainment need • FastMount
bracket system is fabricated from weather resistant
aluminum • Speakers pivot up to 180° on the bracket
while remaining less than 1" from the mounting surface
• Click-stops permit precise, repeatable speaker angle
positioning • Speakers can be mounted horizontally
PART# (WHITE).... 92154
PART# (BLACK)... 92155
QUANTITY.......... PAIR
The following Mariner speakers can be used with the Extreme Accessory Kit shown on page 94.
MARINER 63
SPECIFICATIONS
Tweeter:
1" (25mm) aluminum dome
Woofer:61∕ 2" (165mm) one-piece black carbon fiber cone with a
rubber surround
Frequency Response:
50Hz – 20kHz ±3dB
Impedance:
6 ohms nominal; 4 ohms minimum
5 watts minimum; 100 watts maximum
Power Handling:
Sensitivity:
90dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (W x H x D):
71∕ 2" x 12" x 71∕ 8" (191mm x 305mm x 181mm)
Shipping Weight:
17 lbs (7.7kg) pair
PART# (WHITE).... 92150
PART# (BLACK)... 92151
QUANTITY.......... PAIR
93
sonance mariner series speakers
MARINER 62
SPECIFICATIONS
PART# (WHITE).... 92148
PART# (BLACK)... 92149
QUANTITY.......... PAIR
Tweeter:
1" (25mm) polyurethane dome
Woofer:61∕ 2" (165mm) one-piece black polypropylene cone with a
rubber surround
Frequency Response:
55Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 80 watts maximum
Sensitivity:
89dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (W x H x D):
71∕ 2" x 12" x 71∕ 8" (191mm x 305mm x 181mm)
Shipping Weight:
14 lbs (6.4kg) pair
MARINER 61
SPECIFICATIONS
PART# (WHITE).... 92146
PART# (BLACK)... 92147
QUANTITY.......... PAIR
3
Tweeter:
∕4" (19mm) polyurethane dome
Woofer:61∕ 2" (165mm) one-piece black polypropylene cone
with a rubber surround
Frequency Response:
55Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
5 watts minimum; 80 watts maximum
Power Handling:
Sensitivity:
88dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (W x H x D):
71∕ 2" x 12" x 71∕ 8" (191mm x 305mm x 181mm)
Shipping Weight:
12.5 lbs (5.7kg) pair
MARINER 62 SS - Single Stereo Technology
SPECIFICATIONS
PART# (WHITE).... 92152
PART# (BLACK)... 92153
QUANTITY.......... EACH
Tweeter:Two 1" (25mm) polyurethane domes
Woofer:61∕ 2" (165mm) one-piece black polypropylene cone with a
rubber surround, dual voice coil
Frequency Response:
55Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
5 watts minimum; 80 watts maximum
Power Handling:
Sensitivity:
89dB SPL (2.83V/1 meter)
Grille:Perforated aluminum
Dimensions (W x H x D):
71∕ 2" x 12" x 71∕ 8" (191mm x 305mm x 181mm)
Shipping Weight:
7 lbs (3.2kg) each
sonance mariner 63, 62, 61, 62 SS accessories
Part #
Page#
Extreme kit* (white)
Extreme kit* (black)
92185
92186
122 each$75.00
122 each$75.00
QTY
*Includes stainless steel grille and FastMount bracket for resistance to extreme weather
94
Dealer Cost
sonance mariner series speakers
SONANCE
SERIES
®
MARINER 52
SPECIFICATIONS
Tweeter:
1" (25mm) polyurethane dome
Woofer:51∕4" (133mm) one-piece black polypropylene cone with a
rubber surround
Frequency Response:
65Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 70 watts maximum
Sensitivity:
88dB SPL (2.83V/1 meter)
Grille:
Perforated aluminum
Dimensions (W x H x D):
61∕ 2" x 101∕4" x 6" (165mm x 260mm x 153mm)
Shipping Weight:
12 lbs (5.5kg) pair
PART# (WHITE).... 92142
PART# (BLACK)... 92143
QUANTITY.......... PAIR
MARINER 51
SPECIFICATIONS
PART# (WHITE).... 92140
PART# (BLACK)... 92141
QUANTITY.......... PAIR
SE R I ES
MARINER 52 SS - Single Stereo Technology
O U TDOO R
3
Tweeter:
∕4" (19mm) polyurethane dome
Woofer:51∕4" (133mm) one-piece black polypropylene cone with a
rubber surround
Frequency Response:
70Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 60 watts maximum
Sensitivity:
87dB SPL (2.83V/1 meter)
Perforated aluminum
Grille:
Dimensions (W x H x D):
61∕ 2" x 101∕4" x 6" (165mm x 260mm x 153mm)
Shipping Weight:
11 lbs (5.0kg) pair
SPECIFICATIONS
Tweeter:Two 1" (25mm) polyurethane domes
Woofer:51∕4" (133mm) one-piece black polypropylene cone,
with a rubber surround, dual voice coil
Frequency Response:
65Hz – 20kHz ±3dB
Impedance:
8 ohms nominal; 6 ohms minimum
Power Handling:
5 watts minimum; 70 watts maximum
Sensitivity:
88dB SPL (2.83V/1 meter)
Grille:Perforated aluminum
Dimensions (W x H x D):
61∕ 2" x 101∕4" x 6" (165mm x 260mm x 153mm)
Shipping Weight:
6 lbs (2.75 kg) each
PART# (WHITE).... 92144
PART# (BLACK)... 92145
QUANTITY.......... EACH
Mariner speakers installed dimensions (without base)
Mariner 82:
All Mariner 60-series:
All Mariner 50-series:
A:
B:
C:
D:
E:
F:
A:
B:
C:
D:
E:
F:
A: 6¾"(171mm)
B:11"(279mm)
C:7" (178mm)
D:6" (152mm)
E: 6¾"(171mm)
F: 6½"(165mm)
10" (254mm)
14¾" (375mm)
11" (279mm)
9½" (241mm)
10" (254mm)
9" (229mm)
A
9" 13" 8¾" 7½" 9" 7¾" (229mm)
(330mm)
(222mm)
(191mm)
(229mm)
(197mm)
C
B
E
D
F
95
S o n a n c e Ou t d o o r S e ri e s R o c k Sp e a k e r s
SONANCE OUTDOOR SERIES ROCK SPEAKERS The RK83 and RK63 are weather resistant outdoor speakers for enthusiasts who
want speakers that blend in with the environment. With their rock-like appearance, choice of finishes, and resistance to weather,
Sonance Rock speakers are ideal for background listening in the garden, by the pool, in the yard, or on the patio.
sonance rock speakers
SPECIAL Features Durable construction • Built with
UV, chip, and weather resistant materials to withstand
demanding outdoor environments • Rock-like appearance
and finish blends-in with outdoor environments • Clean,
articulate sound • Higher performance than typical outdoor
speakers • Weather resistant woofer cones with Santoprene
surrounds deliver warm bass • Internal wire connections
help prevent moisture from damaging connections
• Available in granite and brown
RK83
SPECIFICATIONS
PART# (GRANITE) ... 92745
PART# (BROWN)..... 92746
QUANTITY.............. PAIR
Tweeter:
Woofer:
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Available Finishes:
Dimensions (W x H x D):
Shipping Weight:
1” (25mm) polyurethane dome, ferrofluid-cooled
8” (203mm) polypropylene cone with a Santoprene surround
40Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 150 watts maximum
90dB (2.83V/1 meter)
Granite and brown
17¼" x 12½" x 14" (438mm x 318mm x 356mm)
35 lbs (15.8kg) pair
RK63
SPECIFICATIONS
Tweeter:
Woofer:
PART# (GRANITE).... 92743
PART# (BROWN...... 92744
QUANTITY.............. PAIR
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Available Finishes:
Dimensions (W x H x D):
Shipping Weight:
1” (25mm) polyurethane dome, ferrofluid-cooled
6½” (165mm) polypropylene cone with a Santoprene surround
50Hz – 20kHz ±3dB
8 ohms nominal; 6 ohms minimum
5 watts minimum; 100 watts maximum
89dB SPL (2.83V/1 meter)
Granite and brown
13¾" x 11” x 11" (349mm x 279mm x 279mm)
28 lbs (12.6kg) pair
RK10W Rock Woofer
Featuring a 10" woofer designed with built-in low-pass filters that direct the bass frequencies to
the RK10W and the rest of the sound to satellite speakers. This dramatically improves the satellite
speakers' power handling. Available in granite or brown finish.
SPECIFICATIONS
Design:
Woofer:
PART# (GRANITE).... 92887
PART# (BROWN)..... 92888
QUANTITY.............. EACH
96
Frequency Response:
Impedance:
Power Handling:
Sensitivity:
Crossover Frequency:
Dimensions (W x H x D):
Weather-resistant rock woofer
10” (254mm) black polypropylene cone, dual voice coil, with
rubber surround
35Hz – 150kHz ±3dB
8 ohms nominal
5 watts minimum; 150 watts maximum
90dB SPL (2.83V/1 meter)
150Hz (low-pass), 150Hz (high-pass)
193∕ 8" x 167∕ 8” x 143∕ 8" (492mm x 429mm x 365mm)
sonance Rock Speakers
SONANCE
SERIES
®
CRKW WOOFER*
Features a 10-inch woofer in an attractive granite enclosure. A perfect complement to
SoundHenge Redux, Mariner, RK83, and RK63 installations.
SPECIFICATIONS
Woofer: PART#................. 91960
QUANTITY.......... EACH
S o u n d H e n g e E n c l o s ur e s
SoundHenge® Redux rock enclosures are designed to
house any of the Mariner 60 Series and 50 Series outdoor
speakers while complementing landscape designs.
SoundHenge Redux offers a uniform size rock enclosure
that blends into the background of the landscape. Each
enclosure is weather resistant and is designed and textured
for a natural look. Soundhenge is available in granite
and sandstone.
SPECIAL FEATURES Durable construction—only weighs 9 lbs.
(without speaker) • UV, chip, and weather resistant materials
withstand demanding outdoor environments • Grille design
allows for optimum performance yet maintains a natural
appearance • Upgraded mounting system allows for easy
installation of Mariner 60-Series and 50-Series speakers
• Stainless steel and aluminum hardware ensures protection
from the elements
sonance soundhenge enclosures
SOUNDHENGE Redux ENCLOSURE
SPECIFICATIONS
Dimensions (W x H x D): Available Finishes: Shipping Weight:
18" x 14" x 14" (457mm x 356mm x 356mm)
Granite and sandstone
9 lbs (4.08kg) each
PART# (GRANITE)............. 92172
PART# (SANDSTONE)....... 92173
QUANTITY....................... EACH
SE RYI ®ESEXT R E M E & M A R I NE R SE R I ES
M A R I NE & O U TDOO R A U D I O U TDOO
S Y M PRH ON
10" (254mm) black polypropylene cone with a rubber surround, dual voice coil
Frequency Response:
35Hz – 150Hz ±3dB
Impedance:
8 ohms nominal
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Finish:Granite
Dimensions (W x H x D):
19 3∕ 8" x 167∕ 8" x 14 3∕ 8" (492mm x 429mm x 365mm)
Shipping Weight:
20 lbs (9kg) each
*Available while supplies last
97
Accessory Matrix for Outdoor Series Speakers
speakerAccessory
model
Part # & Page #
visual performance series extreme speakers
VP65 XT
VP65R XT
VP65S XT
VP65R SST XT
Metal GrilleFlex BracketSTAPLE templateACOUSTIC enclosure
92812
110
92336119
900651120 91687124
92813
110
92337119
901049120 91688125
92814
110
92344119
----92474
125
92813
110
92337119
901049120 91688125
original series extreme speakers
eXTREME XT
EXTREME XTR
EXTREME XSSTR
Metal GrilleFlex BracketSTAPLE templateACOUSTIC enclosure
92212
111
92336119
900651120 91687124
92213
111
92337119
901049120 91688125
92213
111
92337119
901049120 91688125
Accessory Matrix for Mariner Speakers
speakerAccessory
model
Part # & Page #
Extreme kit
extreme kitSpeaker grille
whiteBlack
white
mariner 82
--
--
92254
114
speaker grille
black
92255114
mariner 63
mariner 62
mariner 61
92252115
92252115
92252115
92253115
92253115
92253115
92250
92250
92251115
92251115
mariner 52
mariner 51
92185
92185
92185
122
122
122
--
--
mariner 62 ss 92185
122
mariner 52 SS
--
98
92186122
92186122
92186122
--
--
92186122
--
115
115
Retrofit enclosureFire-rated backcan
9234212792807
128
9234312792808
128
9234312792808
128
9234312792808
128
coverplate
Masonry bracket
92334118
92066120
92335118
-- ---
--
-- -92335118
-- --
Vapor barrier
91703129
Retrofit enclosureFire-rated backcan
-- 92807
128
-- 92808
128
-- 92808
128
coverplate
Masonry bracketvapor barrier
92334118
92066120 91703129
92335118
--
-92335118
--
--
O U TDOO R
SE R I ES
M AT R I X
99
COMMERCIAL SERIES
(70V/100V)
At Sonance we see an expanding role for our products beyond the home. Sonance Commercial Series
provides the A/V integrator with just what is needed for architects and designers who demand higher
levels of performance and aesthetics for their commercial projects. Our Commercial Series products draw
on the strengths of our residential products while meeting the unique requirements and certifications
necessary for commercial applications. All products feature transformer taps for use in 70V and 100V
applications.
C o mm e r c i a l S e ri e s I n vi s i b l e Sp e a k e r s
Sonance Invisible Speakers When it comes to specifying loudspeakers, invisibility is the leading request from
designers and architects. Sonance Invisible Series speakers' proprietary structural and engineering features make it
possible to invisibly install them in almost any standard wood/metal stud wall or ceiling. The speaker is completely
concealed and essentially becomes an integral part of the wall or ceiling surface. This allows the loudspeaker system
to be placed wherever optimal acoustics dictate, eliminating any visual concerns.
commercial series invisible speakers
SPECIAL FEATURES
Patented planar diaphragm
technology radiates sound in a 140° hemispherical pattern
with smooth, even coverage throughout its bandwidth
• Speaker diaphragm becomes part of the wall or
ceiling surface, making the speaker truly invisible • Can
be installed in new and existing wood metal stud
construction • 70V/100V transformer with multiple
power taps for compatibility with commercial installations
• Two-way, full-range planar design • Self-resetting gel
switches provide overload protection • Includes required
installation supplies
SA2*
SPECIFICATIONS
Radiating Surface:
Tweeter System:
PART#................. 40046
QUANTITY.......... EACH
*Now sold as each.
CO M M E R C I AL SE R I ES
294.0 in2 (1869 cm2) planar diaphragm
0.82 lb (0.37 kg) magnet with 1.02" (26mm) voice coil;
12dB/octave high-pass crossover @ 2kHz
Woofer System:
0.82 lb (0.37kg) magnet with 1.02" (26mm) voice coil;
12dB/octave low-pass crossover
Frequency Response:
70Hz – 20kHz ± 4dB
Impedance:
4 ohms nominal, 3.5 ohms minimum
Power Handling: 60 watts RMS as per EIA standard RS-426-A
Primary voltage: 70V; 100V
Transformer:
Primary taps (70V): 0.5W, 1W, 2W, 4W, 8W, 32W
Primary taps (100V):
1W, 2W, 4W, 8W, 16W, 32W
8-ohm bypass
Sensitivity:
90dB (1W/1 meter)
Dispersion:
140° hemispherical, up to 20kHz
Overload Protection:Two independent self-resetting gel switches (low-frequency
and high-frequency)
Dimensions (W x H x D):
14" x 21" x 3" (356mm x 534mm x 76mm)
Shipping Weight:
16 lbs (7.3kg) each
*The SA2 speaker replaces the SA2C and SA2R speakers.
Note: Requires PBB4 backbox for in-wall installations or PBB6 backbox for in-ceiling
installations. See below.
sonance INVISIBLE SERIES Accessories
SA2
SA2
SA2
SA2
backbox (in-wall installations)
backbox (in-ceiling installations)
installation compensation circuit
installation kit
Part #
Page#
QTY
40065
40066
40067
40069
128
128
129
123
each
$54.00 Open
each
$54.00 Open
each$199.00
$400.00
each$32.00
$64.00
Dealer Cost
MSRP
101
C o mm e r c i a l S e ri e s W i d e Di s p e r s i o n Sp e a k e r s
Wide Dispersion Ceiling Loudspeakers When appearance is just as important as performance, the Sonance CT8 and CT10
provide the integrator with just the right balance. The CT8 and CT10 are unique, extended-bandwidth, wide-dispersion planar
loudspeakers designed for use in commercial installations. The CT10 features concealed mounting hardware that results in a
more discreet appearance than conventional speakers. The CT10 and CT8 are UL-listed for general signaling and plenum use when
installed with the PBB8-10 Backbox.
commercial series wide dispersion speakers
SPECIAL FEATURES 140° hemispherical dispersion pattern
(up to 10kHz) with smooth, even coverage allows speakers
to be spaced farther apart, reducing the total quantity
of loudspeakers and minimizing the visual impact • The
loudspeaker surface may be finished to match almost any
decor or color requirement with water soluble material such
as latex paints using conventional brush-on, roller, or airless
spray application systems
CT10
Specifications
PART#................. 40055
QUANTITY.......... PAIR
Radiating Surface: 125 in2 (806.5cm2) planar diaphragm
(fits standard 8-inch diameter speaker openings)
Driver System: 0.82 lb (0.37kg) magnet with 1.02" (26mm) voice coil
Frequency Response: 80Hz – 15kHz ±4dB
Power Rating: 20 watts RMS as per EIA standard RS-426-A
Pressure Sensitivity: 94dB, 1W/1m
Maximum Output: 106dB @ 1m
System Impedance: 8 ohms nominal; 5.5 ohms minimum
Transformer: Primary voltage: 70 volts
Primary Taps: 0.5W, 1W, 2W, 4W, 8W, 16W
8-ohm bypass
Dimensions (Dia x D): 13" x 23∕ 8" (330mm x 60mm)
Net Weight: 4.2 lbs (1.9kg) each
Shipping Weight: 6 lbs (2.73kg) pair
Certifications:
UL1480, UL2043, NFPA-70, NFPA-90A (US and Canada)
Note: Requires PBB8-10 backbox for UL listing. See below.
CT8
Specifications
PART#................. 40054
QUANTITY.......... PAIR
Radiating Surface: Driver System: Frequency Response: Power Rating: Pressure Sensitivity: Maximum Output: System Impedance: Transformer: Dimensions (Dia x D): Net Weight: Shipping Weight: Certifications:
85.5 in2 (532.3cm2) Planar Diaphragm
(fits standard 8-inch diameter speaker openings)
0.82 lb (0.37kg) magnet with 1.02" (26mm) voice coil
80Hz – 15kHz ±4dB
20 watts RMS as per EIA standard RS-426-A
94dB, 1W/1m
106dB @ 1m
8 ohms nominal; 5.5 ohms minimum
Primary voltage: 70 volts
Primary Taps: 0.5W, 1W, 2W, 4W, 8W, 16W
8-ohm bypass
13" x 23∕ 8" (330mm x 60mm)
4.2 lbs (1.9kg) each
12.0 lbs (5.5kg) pair
UL1480, UL2043, NFPA-70, NFPA-90A (US and Canada)
Note: Requires PBB8-10 backbox for UL listing. See below.
commercial series wide dispersion speaker Accessories
102
Part #
QTY
Dealer Cost
MSRP
PBB8-10 backbox
UMB8-10 universal mounting bracket
40060
40053
10-pack
10-pack
$100.00
$121.55
$160.00
$200.00
C o mm e r c i a l SSERIES
e ri e s F a s t M o u n t Ou t d o o r Sp e a k e r s
SONANCE
FastMount outdoor speakers establish a new benchmark for performance, weather resistance,
®
FASTMOUNT SPEAKERS
and safe, easy installation in commercial/professional outdoor speakers. The exclusive FastMount bracket allows these
loudspeakers to quickly snap and lock securely into place. Once installed, the time required to precisely align an array
of speakers is greatly reduced by an indexed positioning system that ensures consistent position and alignment. All
FastMount models feature a durable, paintable, weather-resistant polypropylene enclosure and paintable perforated
aluminum grille. All models are available in black and white.
commercial series fastmount outdoor speakers
SPECIAL FEATURES FastMount bracket system is
fabricated from weather-resistant aluminum • Speakers
pivot up to 180° on the bracket while remaining less
than 1" from the mounting surface • Click-stop indexed
positioning system permits precise, repeatable speaker
angle positioning for uniform appearance and more
accurate soundfield reproduction • Push-and-lock
speaker installation eliminates clumsy threaded knobs
• Protected Access Connection Terminal (PACT) protects
wire connectors from weather corrosion while making
installation easier • Front-panel wiring connections
speed installation and protect the installer by eliminating
the need for risky acrobatics on ladders
FMS860
SPECIFICATIONS
PART# (WHITE).... 40080
PART# (BLACK)... 40081
QUANTITY.......... PAIR
CO M M E R C I AL SE R I ES
Tweeter: 1" (25mm) polyurethane dome
8" (203mm) one-piece black polypropylene cone
Woofer: with a rubber surround
Frequency Response: 45Hz – 20kHz ±3dB
Nominal Sensitivity: 91dB (2.83V/1m)
Transformer:
Primary voltage: 70V, 100V
Primary taps (70V):
7.5W, 15W, 30W, 60W
Primary taps (100V):
15W, 30W, 60W
8-ohm bypass
5 watts minimum; 125 watts maximum
Power Handling: Available Colors: Black and white
Dimensions (W x H x D): 14" x 9" x 9¼" (356mm x 229mm x 235mm)
Installed Dimensions: See diagram on page 104
Shipping Weight: 20 lbs (9.0kg) pair
FMS660
SPECIFICATIONS
Tweeter: 1" (25mm) polyurethane dome
6½" (165mm) one-piece black polypropylene cone
Woofer: with a rubber surround
Frequency Response: 55Hz – 20kHz ±3dB
Nominal Sensitivity: 89dB (2.83V/1m)
Transformer:
Primary voltage: 70V, 100V
Primary taps (70V):
7.5W, 15W, 30W, 60W
Primary taps (100V):
15W, 30W, 60W
8-ohm bypass
Power Handling: 5 watts minimum; 80 watts maximum
Available Colors: Black and white
Dimensions (W x H x D): 12" x 7½" x 71/8" (305mm x 191mm x 181mm)
Installed Dimensions:See diagram on page 104
Shipping Weight: 14 lbs (6.4kg) pair
PART# (WHITE).... 40078
PART# (BLACK)... 40079
QUANTITY.......... PAIR
103
commercial series fastmount outdoor speakers
FMS530
PART# (WHITE).... 40076
PART# (BLACK)... 40077
QUANTITY.......... PAIR
SPECIFICATIONS
Tweeter: 1" (25mm) polyurethane dome
Woofer: 5¼" (133mm) one-piece black polypropylene cone
with a rubber surround
Frequency Response: 65Hz – 20kHz ±3dB
Nominal Sensitivity: 88dB (2.83V/1m)
Transformer:
Primary voltage:
70V, 100V
Primary taps (70V):
3,8W, 7.5W, 15W, 30W
Primary taps (100V):
7.5W, 15W, 30W
8-ohm bypass
Power Handling: 5 watts minimum; 70 watts maximum
Available Colors: Black and white
Dimensions (W x H x D): 10¼" x 6½" x 6" (260mm x 165mm x 153mm)
Installed Dimensions:See diagram below
Shipping Weight: 12 lbs (5.5kg) pair
fastmount outdoor speaker Accessories
Part #
FMS860 grille (black/white)
FMS660 grille (black/white)
FMS530 grille (black/white)
40117/40116N/A
40115/40114N/A
40113/40112N/A
Page #
QTY
Dealer Cost
each
each
each
$35.00
$30.00
$29.00
FastMount outdoor speaker installed dimensions
FMS860:
A:
B:
C:
D:
E:
F:
FMS660:
10" (254mm)
14¾" (375mm)
11" (279mm)
9½" (241mm)
10" (254mm)
9" (229mm)
A:
B:
C:
D:
E:
F:
A
FMS530:
(229mm)
(330mm)
(222mm)
(191mm)
(229mm)
(197mm)
A:
B:
C:
D:
E:
F:
C
B
104
9" 13" 8¾" 7½" 9" 7¾" 6¾" 11" 7" 6" 6¾" 6½" (171mm)
(279mm)
(178mm)
(152mm)
(171mm)
(165mm)
E
D
F
C o mm e r c i a l SSERIES
e ri e s I n d o o r / Ou t d o o r
SONANCE
®
Sp e a k e r s
Sonance Commercial Series Indoor/Outdoor Speaker's weather-resistant design gives you the flexibility of use in
both indoor and outdoor installations. A rotary switch on the rear of the speaker allows selection of 70V, 100V, or
8-ohm operation. Includes C-bracket for installation on walls and columns, or under eaves.
commercial series indoor/outdoor speakers
SM516
SPECIFICATIONS
PART# (WHITE).... 40074
PART# (BLACK)... 40075
QUANTITY.......... PAIR
CO M M E R C I AL SE R I ES
5
Tweeter: ∕ 8" (16mm) polycarbonate dome
Woofer: 5¼" (133mm) polypropylene cone with a rubber surround
Frequency Range: 65Hz – 20kHz (–10dB)
Nominal Sensitivity: 88dB SPL (2.83V/1meter)
Nominal Coverage Angle: 90° horizontal, 90° vertical
Directivity Factor:
2.94 averaged from 500Hz to 4kHz
Directivity Index:
3.50 averaged from 500Hz to 4kHz
Transformer:
Primary voltage: 70V, 100V
Primary taps (70V):
2W, 4W, 8W, 16W
Primary taps (100V):
2W, 4W, 8W, 16W
8-ohm bypass
60 watts maximum program power; 40 watts continuous
Power Handling: pink noise
Enclosure Material: White ABS
White ABS
Baffle Material: Grille: Paintable weather-resistant aluminum
4-post barrier strip with two input terminals and two
Input Termination: loop-through terminals
Dimensions (W x H x D): 61∕8" x 93∕ 8" x 6½" (156mm x 238mm x 165mm)
Net Weight: 8 lbs (3.63kg) each
Shipping Weight: 19 lbs (8.61kg) pair
105
C o mm e r c i a l S e ri e s I n - C e i l i n g Sp e a k e r s
COMMERCIAL IN-Ceiling Speakers Commercial Series In-Ceiling speakers offer performance, flexibility, and pricing for almost any
commercial application. The CM860 and CM660 are extended bandwidth, wide-dispersion loudspeakers designed for ceiling mounting in
commercial or professional installations including airports, hotels, boardrooms, cruise ships, casinos, convention centers, restaurants,
offices, houses of worship, and retail stores. Commercial Series in-ceiling speakers feature excellent performance, reliability, and ease
of installation at a very attractive price.
Commercial series in-ceiling speakers
SPECIAL FEATURES Integrated backcans • Front-baffle
accessible transformer taps • Polypropylene cone woofers
and cloth dome tweeters ensure superior quality sound in
foreground music, public address, and paging applications
• Wide dispersion (120° conical) allows larger areas to be
adequately covered by fewer speakers • Integrated, deepdrawn steel backcan and integrated Roto-Lock clamps allow
installation from within the room • Fire-rated ABS baffles
meet UL94V-0 fire rating • Weather-resistant perforated
aluminum grilles can be painted to match the installation
surroundings • CM860 is compatible with Sonance Original
Series Large round Flex brackets • CM660 is compatible
with Sonance Original Series Medium round Flex brackets •
CM860 available in white and black
CM860
SPECIFICATIONS
PART# (WHITE).... 40073
PART# (BLACK)... 40122
QUANTITY.......... PAIR
Tweeter: 1" (25mm) cloth dome, pivoting
Woofer: 8" (203mm) polypropylene cone with a rubber surround
Frequency Range: 50Hz – 20kHz (–10dB)
Nominal Sensitivity: 90dB (2.83V/1meter)
Nominal Coverage Angle: 120° conical
Pressure Sensitivity:
92dB, 1W/1m
Directivity Factor: 5.9 averaged from 500Hz to 4kHz
Directivity Index: 4.6 averaged from 500Hz to 4kHz
Transformer:
Primary voltage: 70V, 100V
Primary taps (70V):
7.5W, 15W, 30W, 60W
Primary taps (100V):
15W, 30W, 60W
8-ohm bypass
Power Handling: 140 watts maximum program power;
70 watts continuous pink noise
Enclosure Type: Deep-drawn steel back can
Baffle Material: ABS (meets UL94V-0 fire rating)
Grille: Paintable weather-resistant aluminum
Input Termination: Locking removable quick-connect with two input
terminals and two loop-through terminals
Dimensions (Dia x D): 12" x 9½" (305mm x 241mm)
Cut-Out Diameter: 10" (254mm)
Net Weight: 11 lbs (5kg) each
Shipping Weight: 23 lbs (10.4kg) pair
Included Accessories: C-support plate, 2 internationally-compatible tile support rails,
cut-out template, paint plug, removable quick-connect wire
terminator
Certifications:
UL1480, UL2043, NFPA-70, NFPA-90A
(US and Canada)
Commercial series cm860 in-ceiling speaker Accessories
106
Part #
CM860 metal grille (black/white) CM860 C-mount ring assembly
CM860 metal rough-in bracket
Large round coverplate
Large round Flex bracket 40124/40121 N/A
40119N/A
40125N/A
92245 118
92247 119
Page#
QTY
Dealer Cost
each
1 pair
3 pair
1 pair
5 pair
$20.00
$38.00
$93.00
$34.50
$66.50
Commercial series in-ceiling speakers
CM660
SPECIFICATIONS
PART#................. 40072
QUANTITY.......... PAIR
Note: Not suitable for air-handling spaces
Commercial Series cm660 in-ceiling speaker Accessories
Part #
CM660 metal grille (white) CM660 C-mount ring assembly
CM660 metal rough-in bracket
Medium round coverplate
Medium round Flex bracket 40120 N/A
40118N/A
40126N/A
92335 118
92337 119
Page#
QTY
Dealer Cost
1
1
3
1
5
$32.00
$38.00
$85.00
$17.50
$66.50
pair
pair
pair
pair
pair
c o mm e r c i a l s e ri e s
Tweeter: ¾" (19mm) cloth dome, pivoting
Woofer: 61∕ 2" (165mm) polypropylene cone with a rubber surround
Frequency Range: 65Hz – 20kHz (-10dB)
Nominal Sensitivity: 89dB SPL (2.83V/1meter)
Nominal Coverage Angle: 120° conical
Directivity Factor: 5.9 averaged from 500Hz to 4kHz
Directivity Index: 4.6 averaged from 500Hz to 4kHz
Transformer:
Primary voltage: 70V, 100V
Primary taps (70V):
7.5W, 15W, 30W, 60W
Primary taps (100V):
15W, 30W, 60W
8-ohm bypass
Power Handling: 140 watts maximum program power;
70 watts continuous pink noise
Enclosure Type: Deep-drawn steel back can
Baffle Material: ABS (meets UL94V-0 fire rating)
Paintable weather-resistant aluminum
Grille: Input Termination: Locking removable quick-connect with two input terminals
and two loop-through terminals
Dimensions (Dia x D): 9¾" x 7½" (248mm x 191mm)
Cut-Out Diameter: 85∕ 32" (207mm)
Net Weight: 8 lbs (3.63kg) each
Shipping Weight: 19 lbs (8.61kg) pair
Included Accessories: C-support plate, 2 internationally-compatible tile support
rails, cut-out template, paint plug, removable quick connect
wire terminator
Certifications: UL-1480, NFPA-70, CE (US and Canada)
107
speaker aCCESSORIES
Sonance offers a full range of speaker accessories to fit all your custom installation needs for Visual Performance
Series, Original Series, Contractor Series, Cinema Series, Outdoor Series and Commercial Series speakers.
Replacement grilles, cloth grille options, wood acoustic enclosures, retrofit enclosures, fire-rated backcans,
coverplates, adapters, and a variety of brackets are available.
Sp e a k e r G ri l l e s a n d C o v e rp l at e s
Replacement grilles and cloth grille options are available for just about every Sonance in-wall and in-ceiling speaker model.
VISUAL PERFORMANCE series grilles
visual performance Rectangle GRILLE
Fits all Visual Performance Series Rectangle speakers. The one-piece grille is made of perforated
steel and plastic.
Large
Medium
Small
Part #
Quantity
MSRPDealer Price
92614PAIROPEN $32.00
92611PAIROPEN $32.00
92608PAIROPEN $32.00
visual performance Round GRILLE
Fits all Visual Performance Series Round speakers. The one-piece grille is made of perforated
steel and plastic.
Part #
Quantity
MSRPDealer Price
92615PAIROPEN $32.00
92612PAIROPEN $32.00
92609PAIROPEN $32.00
S P EAKE R a c c e s s o ri e s
Large
Medium
Small
visual performance Square GRILLE
Fits all Visual Performance Series Rectangle speakers. The one-piece grille is made of perforated
steel and plastic.
Large
Medium
Small
Part #
Quantity
MSRPDealer Price
92616PAIROPEN $32.00
92613PAIROPEN $32.00
92610PAIROPEN $32.00
Visual Performance medium LCR grille
Fits all Visual Performance Series Medium LCR speakers.
The one-piece grille is made of perforated steel and plastic.
PART#................. 92806
QUANTITY.......... EACH
109
Visual Performance series grilles
Visual Performance extreme rectangle GRILLE
Fits the VP65 XT. The one-piece grille is made of powder-coated stainless steel and plastic.
PART#................. 92812
QUANTITY.......... EACH
Visual Performance extreme round grille
Fits the VP65R XT and VP65R SST XT. The one-piece grille is made of powder-coated stainless steel
and plastic.
PART#................. 92813
QUANTITY.......... EACH
VISUAL PERFORMANCE EXTREME SQUARE GRILLE
Fits the VP65S XT. The one-piece grille is made of powder-coated stainless steel and plastic.
PART#................. 92814
QUANTITY.......... EACH
Original Series grilles
original series rectangle GRILLE
Fits all Original Series Rectangle speakers. The grille is made of perforated aluminum.
Large
Medium
Small
110
Part #
Quantity
MSRPDealer Price
92289PAIROPEN $36.50
92100PAIROPEN $32.00
92087PAIROPEN $29.00
SONANCE
®
original series grilles
SERIES
original series Round GRILLE
Fits all Original Series Round speakers. The grille is made of perforated aluminum.
Large
Medium
Small
Part #
Quantity
MSRPDealer Price
92290PAIROPEN $36.50
92101PAIROPEN $32.00
92088PAIROPEN $29.00
original series Square metal GRILLE
Fits all Original Series square speakers. The grille is made of perforated aluminum.
Medium
Small
Part #
Quantity
MSRPDealer Price
92458PAIROPEN $32.00
92599PAIROPEN $29.00
Fits Original Series 623 LCR speakers. The grille is made of perforated aluminum
Sold each.
PART#................. 92738
QUANTITY.......... EACH
NEW PRODUCT INFO
TO COME HERE
S P EAKE R a c c e s s o ri e s
original SERIES LCR METAL GRILLE
original SERIES extreme rectangle METAL GRILLE
Fits Original Series XT speakers.
stainless steel.
The grille is made of white powder-coated certified 316
Sold in pairs
PART#................. 92212
QUANTITY.......... PAIR
original SERIES extreme round METAL GRILLE
Fits Original Series XTR and XTSSR speakers. The grille is made of white powder-coated certified
316 stainless steel.
Sold in pairs.
PART#................. 92213
QUANTITY.......... PAIR
111
Contractor series grilles
CONTRACTOR SERIES cr801 METAL GRILLE
Fits CR801speakers. The grille is made of perforated aluminum.
Sold in pairs.
PART#................. 92013
QUANTITY.......... PAIR
CONTRACTOR SERIES rectangle METAL GRILLE
Fits C201 and C101 speakers. The grille is made of perforated aluminum.
Sold in pairs
PART#................. 91943
QUANTITY.......... PAIR
CONTRACTOR SERIES round METAL GRILLE
Fits CR201, CR101, and CR101SST speakers. The grille is made of perforated aluminum.
PART#................. 91944
QUANTITY.......... PAIR
Sold in pairs.
CONTRACTOR SERIES square METAL GRILLE
Fits C201SQ speakers. The grille is made of perforated aluminum.
PART#................. 141215
QUANTITY.......... EACH
112
Sold each.
cinema Series grilles
cinema LCR1/SUR1 Grille
Fits the Cinema LCR1 and SUR1. The one-piece grille is made of perforated steel and plastic.
Sold in pairs.
PART#................. 92690
QUANTITY.......... EACH
cinema LCR2/SUR2 grille
Fits the Cinema LCR2 and SUR2. The one-piece grille is made of perforated steel and plastic.
Sold in pairs
Cinema Sub10-250 grille
S P EAKE R a c c e s s o ri e s
PART#................. 92691
QUANTITY.......... EACH
Visual Performance replacement grille for Cinema In-Wall Subwoofer 10-250.
Sold each
PART#................. 92894
QUANTITY.......... EACH
Cinema Sub12-500 grille
Visual Performance replacement grille for Cinema In-Wall Subwoofer 12-500.
Sold each
PART#................. 92895
QUANTITY.......... EACH
113
cinema series grilles/Mariner Series Grilles
Cinema Cabinet LCR1 Grille
Black cloth replacement grille for Cinema Cabinet LCR1 speaker.
Sold in each
PART#................. 92883
QUANTITY.......... EACH
Cinema Ceiling Square LCR/SUR Grille
Fits the Cinema Series In-Ceiling speakers Cinema LCR1S, SUR1S and LCR.5S.
PART#................. 92882
QUANTITY.......... PAIR
Sold in pairs
cinema select metal GRILLE
Fits Cinema Select LCR and SUR speakers and all Original Series Medium rectangle speakers. The
grille is made of perforated aluminum.
PART#................. 92100
QUANTITY.......... PAIR
Sold in pairs.
Mariner series grilles
WHITE
PART#................. 92254
QUANTITY.......... PAIR
BLACK
PART#................. 92255
QUANTITY.......... PAIR
114
Mariner 82 Grille
Replacement grilles for Mariner 82 speakers. Available in white or black, sold in pairs.
Mariner Series Grilles
Mariner 63, 62 and 61 Grille
Replacement grilles for Mariner 63, 62 and 61 speakers, including SST models. Available in
black or white, sold in pairs.
WHITE
PART#................. 92252
QUANTITY.......... PAIR
BLACK
PART#................. 92253
QUANTITY.......... PAIR
Replacement grilles for Mariner 52 and 51 speakers, including SST models. Available in white
or black, sold in pairs.
WHITE
PART#................. 92250
QUANTITY.......... PAIR
BLACK
PART#................. 92251
QUANTITY.......... PAIR
Ellipse series grilles
S P EAKE R a c c e s s o ri e s
Mariner 52 and 51 Grille
ELLIPSE LCR GRILLE
Fits Ellipse 1.0 LCR speakers. The grille is made of perforated aluminum.
Sold each.
PART#................. 92009
QUANTITY.......... EACH
ELLIPSE SUR GRILLE
Fits Ellipse SUR speakers. It will also fit Ellipse LCR speakers. The grille is made of perforated
aluminum.
Sold in pairs.
PART#................. 92010
QUANTITY.......... PAIR
115
Cabinet Speaker Grilles
cinema select lcr cabinet speaker/
Original Series 622c cabinet speaker grille
PART#................. 701114
QUANTITY.......... each
eplacement cloth grille fits Cinema Select LCR Cabinet speaker and Original Series 622C Cabinet
R
speaker.
Sold each.
Symphony 623 LCR Cabinet speaker grille*
PART#................. 700493
QUANTITY.......... each
Replacement cloth grille fits Symphony 623 LCR Cabinet speaker.
*While supplies last.
sub12-250 Cabinet subwoofer grille
Replacement cloth grille fits SUB12-250 Cabinet Subwoofer.
Sold each.
PART#................. 142662
QUANTITY.......... each
116
Invisible
series
Installation accessories
Cabinet
Speaker
Grilles
sub10-150 Cabinet subwoofer grille
Replacement cloth grille fits SUB10-150 Cabinet Subwoofer.
Sold each.
PART#................. 142661
QUANTITY.......... each
sub8-100 Cabinet subwoofer grille
Replacement cloth grille fits SUB8-100 Cabinet Subwoofer.
Sold each.
PART#................. 142660
QUANTITY.......... each
S P EAKE R a c c e s s o ri e s
117
Coverplates
Rectangle COVERPLATE
This metal coverplate is designed to cover a template or bracketed hole until the speaker is
installed. It is sized slightly smaller than the actual speaker, so the speaker baffle edge will cover
any paint ridge created during painting. Discreetly stamped “Reserved for Sonance® speakers” and
painted Sonance white, the coverplate can be used with all Visual Performance Series and Original
Series rectangle speakers.
Large
Medium
Part #
Quantity
MSRPDealer Price
92244PAIROPEN $34.50
92334PAIROPEN $17.50
round COVERPLATE
This metal coverplate is designed to cover a template or bracketed hole until the speaker is
installed. It is sized slightly smaller than the actual speaker, so the speaker baffle edge will cover
any paint ridge created during painting. Discreetly stamped “Reserved for Sonance® speakers” and
painted Sonance white, the coverplate can be used with all Visual Performance Series and Original
Series round speakers.
Large
Medium
Part #
Quantity
MSRPDealer Price
92245PAIROPEN $34.50
92335PAIROPEN $17.50
ELLIPSE COVERPLATE
This metal coverplate is designed to cover a template or bracketed hole until the speaker is
installed. It is sized slightly smaller than the actual speaker, so the speaker baffle edge will cover
any paint ridge created during painting. Discreetly stamped “Reserved for Sonance® speakers” and
painted Sonance white, the coverplate can be used with all Ellipse Series speakers.
PART#................. 91974
QUANTITY.......... EACH
118
Sold each, with flex bars.
I n s ta l l at i o n a n d M o u n t i n g Br a c k e t s
Sonance offers a variety of brackets that make it easy to solve any installation riddle.
VISUAL PERFORMANCE series/original series/contractor series brackets
Rectangle Flex Bracket
This thin plastic template for new construction can be nailed, stapled, or screwed to studs before
drywall is cut and installed. The speaker then installs using its Roto-Lock clamps. The Flex bracket's
snap-on mesh metal wings will accommodate up to 24-inch (610mm) on-center installations and
are configurable horizontally or vertically. Centering marks aid in proper alignment. It can be
used with all Visual Performance Series and Original Series rectangle speakers.
Sold in 5-pair boxes.
Large
Medium
Small
Part #
92246
92336
92470
Quantity
MSRPDealer Price
5 PAIROPEN
$66.50
5 PAIROPEN
$66.50
5 PAIROPEN
$66.50
round Flex Bracket
S P EAKE R a c c e s s o ri e s
This thin plastic template for new construction can be nailed, stapled, or screwed to joists before
drywall is cut and installed. The speaker then installs using its Roto-Lock clamps. The Flex bracket's
snap-on mesh metal wings will accommodate up to 24-inch (610mm) on-center installations. It
can be used with all Visual Performance Series and Original Series round speakers.
Sold in 5-pair boxes.
Large
Medium
Small
Part #
92247
92337
92471
Quantity
MSRPDealer Price
5 PAIROPEN
$66.50
5 PAIROPEN
$66.50
5 PAIROPEN
$66.50
square Flex Bracket
This thin plastic template for new construction can be nailed, stapled, or screwed to joists
before drywall is cut and installed. The speaker then installs using its Roto-Lock clamps. The
Flex bracket's snap-on mesh metal wings will accommodate up to 24-inch (610mm) on-center
installations. Centering marks aid in proper alignment. It can be used with all Visual Performance
Series and Original Series square speakers.
Sold in 5-pair boxes.
Large
Medium
Small
Part #
92801
92344
92472
Quantity
MSRPDealer Price
5 PAIROPEN
$66.50
5 PAIROPEN
$66.50
5 PAIROPEN
$66.50
medium lcr Flex Bracket
This thin plastic template for new construction can be nailed, stapled, or screwed to studs before
drywall is cut and installed. The speaker then installs using its Roto-Lock clamps. The Flex bracket's
snap-on mesh metal wings will accommodate up to 24-inch (610mm) on-center installations and
are configurable horizontally or vertically. Centering marks aid in proper alignment. It can be
used with all Visual Performance Series and Original Series Medium LCR speakers.
Sold each.
PART#................. 92475
QUANTITY.......... EACH
119
VISUAL PERFORMANCE series/original series/contractor series brackets
Medium rectangle STAPLE TEMPLATE
PART#................. 900651
QUANTITY.......... 5 PAIR
This thin plastic template for new construction (16-inch (406mm) on-center installations
only) can be stapled to studs before drywall is cut and installed. The speaker then installs
using its Roto-Lock clamps. It can be used with all Visual Performance Series, Original
Series, and Contractor Series Medium rectangle speakers, and Cinema Select LCR/SUR
speakers. Not recommended when wall interior obstructions (studs, pipes, etc.) are closer
than 11∕4" (32mm) to the top or bottom of the drywall cut-out hole, or when drywallers
must use routers.
Sold in 5-pair boxes.
Large rectangle staple template
PART#................. 901067
QUANTITY.......... 5 PAIRS
This thin plastic template for new construction (16-inch (406mm) on-center installations
only) can be stapled to studs before drywall is cut and installed. The speaker then installs
using its Roto-Lock clamps. It can be used with all Visual Performance Series and Original
Series Large Rectangle speakers. Not recommended when wall interior obstructions (studs,
pipes, etc.) are closer than 11∕ 4" (32mm) to the top or bottom of the drywall cut-out hole,
or when drywallers must use routers.
Sold in 5-pair boxes.
medium rectangle MASONRY BRACKET
PART#................. 92066
QUANTITY.......... PAIR
This thin plastic bracket provides a surface in brick walls to use Roto-Lock mounting systems,
allowing speakers to be installed into walls constructed using brick and finished with plaster. It can
be used with all Visual Performance Series, Original Series and Contractor Series Medium rectangle
speakers and Cinema Select LCR/SUR speakers.
Sold in pairs.
medium ROUND STAPLE TEMPLATE
PART#................. 901049
QUANTITY.......... 5 PAIR
This thin plastic template for new construction (16-inch (406mm) on-center installations only) can
be stapled to studs before drywall is cut and installed. The speaker then installs using its Roto-Lock
clamps. It can be used with all Visual Performance Series, Original Series and Contractor Series
Medium round speakers. Not recommended when wall interior obstructions (studs, pipes, etc.) are
closer than 11∕4" (32mm) to the top or bottom of the drywall cut-out hole, or when drywallers must
use routers.
Sold in 5-pair boxes.
CONTRACTOR series SQUARE Flex Bracket
PART#................. 91942
QUANTITY.......... PAIR
This thin plastic template for new construction can be nailed, stapled, or screwed to studs before
drywall is cut and installed. The speaker then installs using its Roto-Lock clamps. The Flex bracket's
snap-on mesh metal wings will accommodate up to 24-inch (610mm) on-center installations.
Centering marks aid in proper alignment. It can be used only with Contractor Series C201SQ
speakers.
Sold in pairs.
small Rectangle MASONRY BRACKET
PART#................. 92067
QUANTITY.......... PAIR
120
This thin plastic bracket provides a surface in brick walls to use Roto-Lock mounting systems,
allowing speakers to be installed into walls constructed using brick and finished with plaster. It can
be used with all Visual Performance Series and Original Series Small rectangle speakers.
Sold in pairs.
cinema series brackets
cinema LCR1/SUR1 Flex Bracket
This thin plastic template for new construction can be nailed, stapled, or screwed to studs
before drywall is cut and installed. The speaker then installs using its Roto-Lock clamps. The
Flex bracket's snap-on mesh metal wings will accommodate up to 24-inch (610mm) on-center
installations and are configurable horizontally or vertically. Centering marks aid in proper
alignment. It can be used only with Cinema LCR1 and SUR1 speakers.
Sold each.
PART#................. 92499
QUANTITY.......... EACH
Cinema LCR2/SUR2 Flex Bracket
Sold each.
PART#................. 92500
QUANTITY.......... EACH
S P EAKE R a c c e s s o ri e s
This thin plastic template for new construction can be nailed, stapled, or screwed to studs
before drywall is cut and installed. The speaker then installs using its Roto-Lock clamps. The
Flex bracket's snap-on mesh metal wings will accommodate up to 24-inch (610mm) on-center
installations and are configurable horizontally or vertically. Centering marks aid in proper
alignment. It can be used only with Cinema LCR2 and SUR2 speakers.
CINEMA ceiling Flex Bracket
This thin plastic template for new construction can be nailed, stapled, or screwed to joists
before drywall is cut and installed. The speaker then installs using its Roto-Lock clamps. The
Flex bracket's snap-on mesh metal wings will accommodate up to 24-inch (610mm) on-center
installations and are configurable horizontally or vertically. Centering marks aid in proper
alignment. It can be used with the Cinema Series In-Ceiling speakers.
Sold each.
PART#................. 92800
QUANTITY.......... EACH
cinema select Flex Bracket
Thin plastic template for new construction can be nailed, stapled, or screwed to studs before
drywall is cut and installed. The speaker then installs using its Roto-Lock clamps. Snap-on mesh
metal wings will accommodate up to 24-inch (610mm) on-center installations. Configurable
horizontally or vertically. Centering marks. It can be used with Cinema Select LCR/SUR speakers,
as well as all Visual Performance Series, Original Series, and Contractor Series Medium rectangle
speakers.
PART#................. 92336
QUANTITY.......... 5 PAIRS
Sold in 5-pair boxes.
121
cinema series brackets
Cinema select STAPLE TEMPLATE
PART#................. 900651
QUANTITY.......... 5 PAIR
This thin plastic template for new construction (16-inch (406mm) on-center installations only) can
be stapled to studs before drywall is cut and installed. The speaker then installs using its Roto-Lock
clamps. It can be used with Cinema Select LCR and SUR speakers, as well as all Visual Performance
Series, Original Series, and Contractor Series Medium rectangle speakers. Not recommended
when wall interior obstructions (studs, pipes, etc.) are closer than 11∕4" (32mm) to the top or bottom
of the drywall cut-out hole, or when drywallers must use routers.
Sold in 5-pair boxes.
cinema select MASONRY BRACKET
PART#................. 92066
QUANTITY.......... PAIR
This thin plastic template for new construction (16-inch (406mm) on-center installations only) can
be stapled to studs before drywall is cut and installed. The speaker then installs using its Roto-Lock
clamps. It can be used with Cinema Select LCR/SUR speakers, as well as all Visual Performance
Series, Original Series, and Contractor Series Medium speakers. Not recommended when wall
interior obstructions (studs, pipes, etc.) are closer than 11∕4" (32mm) to the top or bottom of the
drywall cut-out hole, or when drywallers must use routers.
Sold in pairs.
Ellipse series brackets
ELLIPSE Flex Bracket
PART#................. 91922
QUANTITY.......... EACH
This thin plastic template for new construction can be nailed, stapled, or screwed to studs before
drywall is cut and installed. The speaker then installs using its Roto-Lock clamps. The Flex bracket's
snap-on mesh metal wings will accommodate up to 24-inch (610mm) on-center installations.
Centering marks aid in proper alignment. It can be used with Ellipse 1.0 LCR and SUR speakers.
Sold each.
Mariner series brackets
MARINER extreme accessory kit
PART# (WHITE).... 92185
PART# (BLACK)... 92186
QUANTITY.......... EACH
122
Designed to fit Mariner 63, Mariner 62 and Mariner 61 speakers, this kit includes one stainless steel
grille and one stainless steel FastMount bracket assembly. Mariner speakers outfitted with these
parts are ideal for use in installations where the speakers will be exposed to extreme weather,
permanent outdoor installations in severe climates or near the ocean, and in installations on boats
used at sea.
Available in black and white.
Invisible series Installation accessories
sa3, saw, and sa1.5 space savers
eusable units designed to be installed in new construction to reserve locations for the speakers
R
during the early stages of construction. At the appropriate time, the speaker installer removes
the Space Saver and replaces it with the Invisible Series speaker.
Available for the SA3/SAW and the SA1.5.
SA3/SAW Space Saver SPECIFICATIONS
Dimensions (W x H x D):
Shipping Weight:
Net Weight:
16" x 24" x 3½" (406mm x 610mm x 89mm)
8 lbs (3.6kg) each
5 lbs (2.3kg) each
PART#
(SA3/SAW).......... 92723
QUANTITY.......... EACH
SA1.5 Space Saver SPECIFICATIONS
Dimensions (W x H x D):
Shipping Weight:
Net Weight:
12" x 16" x 3½" (305mm x 406mm x 89mm)
5 lbs (2.3kg) each
3 lbs (1.4kg) each
PART# (SA1.5)..... 92722
QUANTITY.......... EACH
Replacement kit contains required installation supplies that are included with the SA speakers.
Each kit contains the following items (enough to install two SA speakers):
(2)
(2)
(4)
(4)
(4)
Vellum overlays
8-oz bags of joint compound
#10 – 24 x 3 hex screws
#8 washers
High-density rubber standoffs
(1) 5/32 hex wrench
(1) 8-oz jar of overlay adhesive
(1) Measuring cup
PART#................. 40069
QUANTITY.......... EACH
S P EAKE R a c c e s s o ri e s
SA2 replacement installation kit
123
A c o u s t i c E n c l o s ur e s , B a c k b o x e s a n d B a c k c a n s
Sonance acoustic enclosures and retrofit backboxes provide significant performance enhancement and sound spillover
reduction. Fire-rated backcans perform in accordance with various ASTM and UL safety tests.
visual performance series/original series/contractor series wood acoustic enclosures
large rectangle wood ACOUSTIC ENCLOSURE
This fully-braced ½" MDF enclosure is designed to deliver free-standing speaker
performance from Visual Performance Series and Original Series Large rectangle
speakers and woofers. It offers premium design for the finest sonic performance.
Internal Volume: Dimensions* (W x H x D): Cut-Out Dims. (W x H): Shipping Weight: 1.4 ft3
14" x 60" x 3½" (356mm x 1524mm x 89mm)
811/16" x 1411/16" (221mm x 373mm)
38 lbs (17.3kg)
*Add thickness of wall material to listed depth to arrive at total depth
PART#................. 91708
QUANTITY.......... EACH
Note: Enclosure depth is sufficient to accommodate the recommended speakers
when installed behind ½" or thicker drywall.
large Round wood ACOUSTIC ENCLOSURE
An acoustically-optimized ½" MDF enclosure that delivers free-standing speaker
performance from Visual Performance Series and Original Series Large round speakers
and woofers.
PART#................. 91900
QUANTITY.......... EACH
Internal volume:
Dimensions* (W x H x D): Cut-Out Diameter:
Shipping Weight: 1.0 ft3
14" x 27" x 6" (356mm x 152mm x 86mm)
10¼" (260mm)
38 lbs (17.3kg)
*Add thickness of wall or ceiling material to listed depth to arrive at total depth
large square wood ACOUSTIC ENCLOSURe
This fully-braced ½" MDF enclosure is designed to deliver free-standing speaker
performance from Visual Performance Series and Original Series Large square
speakers. It offers premium design for the finest sonic performance.
PART#................. 92481
QUANTITY.......... EACH
Internal Volume:
Dimensions* (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight: 1.0 ft3
14" x 27" x 6" (356mm x 152mm x 86mm)
10¼" x 10¼" (260mm x 260mm)
38 lbs (17.3kg)
*Add thickness of wall or ceiling material to listed depth to arrive at total depth
medium rectangle wood ACOUSTIC ENCLOSURe
This fully-braced ½" MDF enclosure is designed to deliver free-standing speaker
performance from Visual Performance Series, Original Series and Contractor Series
Medium rectangle speakers. It offers premium design for the finest sonic performance.
PART#................. 91687
QUANTITY.......... EACH
124
Internal Volume:
Dimensions* (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight: 0.62 ft3
14" x 36" x 31∕ 2" (356mm x 914mm x 89mm)
7 1/8" x 10 7/8" (181mm x 276mm)
22 lbs (10kg)
*Add thickness of wall material to listed depth to arrive at total depth
visual performance series/original series/contractor series wood acoustic enclosures
medium ROUND wood Acoustic Enclosure
This fully-braced ½" MDF enclosure is designed to deliver free-standing speaker performance
from Visual Performance Series, Original Series and Contractor Series Medium round speakers.
It offers premium design for the finest sonic performance.
Internal Volume:
Dimensions* (W x H x D): Cutout Diameter:
Shipping Weight:
0.62 ft3
14" x 201∕ 2" x 51∕ 4" (356mm x 521mm x 133mm)
8½" (216mm)
16 lbs (7.3kg)
PART#................. 91688
QUANTITY.......... EACH
*Add thickness of wall or ceiling material to listed depth to arrive at total depth
medium square wood ACOUSTIC ENCLOSURe
This fully-braced ½" MDF enclosure is designed to deliver free-standing speaker performance
from Visual Performance Series and Original Series Medium square speakers. It offers premium
design for the finest sonic performance.
Internal Volume:
Dimensions* (W x H x D):
Cut-Out Dims. (W x H):
Shipping Weight: 0.62 ft3
14" x 20½" x 5¼"
8 3/8" x 83/8" (213mm x 213mm)
16 lbs (7.3kg)
PART#................. 92474
QUANTITY.......... EACH
*Add thickness of wall or ceiling material to listed depth to arrive at total depth
Fully-braced ½" MDF enclosure designed to deliver free-standing speaker performance from
Visual Performance Series and Original Series Small round speakers. Premium design for the
finest sonic performance.
Internal Volume:
Dimensions* (W x H x D): Cut-Out Diameter:
Shipping Weight:
0.56 cu. ft.
14" x 12½" x 4" (356mm x 318mm x 101mm)
6" (152mm)
8 lbs (3.6kg)
PART#................. 92445
QUANTITY.......... EACH
*Add thickness of wall or ceiling material to listed depth to arrive at total depth
S P EAKE R a c c e s s o ri e s
small Round wood Acoustic enclosure
small Square wood acoustic enclosure
Fully-braced ½" MDF enclosure designed to deliver free-standing speaker performance from
Visual Performance Series and Original Series Small Square speakers. Premium design for the
finest sonic performance.
Internal Volume:
Dimensions* (W x H x D): Cut-Out Dims. (W x H):
Shipping Weight:
0.56 cu. ft.
14" x 12¼" x 4" (356mm x 311mm x 101mm)
5 5/8" x 5 5/8" (143mm x 143mm)
8 lbs (3.6kg)
PART#................. 92449
QUANTITY.......... EACH
*Add thickness of wall or ceiling material to listed depth to arrive at total depth
cinema select wood ACOUSTIC ENCLOSURE
This fully-braced ½" MDF enclosure is designed to deliver free-standing speaker performance
from Cinema Select LCR and SUR speakers. It offers premium design for the finest sonic
performance.
Internal Volume:
Dimensions* (W x H x D):
Cut-Out Dims. (W x H ):
Shipping Weight: 0.62 ft3
14" x 36" x 31∕ 2" (356mm x 914mm x 89mm)
7 1/8" x 10 7/8" (181mm x 276mm)
22 lbs (10kg)
*Add thickness of wall material to listed depth to arrive at total depth
PART#................. 91687
QUANTITY.......... EACH
125
Ellipse series wood acoustic enclosures
ELLIPSE wood ACOUSTIC ENCLOSURE
This acoustic enclosure for Ellipse 1.0 LCR and Ellipse SUR features ½" MDF construction with
damping material.
PART#................. 91921
QUANTITY.......... EACH
Internal Volume: Dimensions* (W x H x D): 0.54 ft3
14" x 151∕4" x 6" (356mm x 387mm x 152mm)
*Add thickness of wall or ceiling material to listed depth to arrive at total depth
Ci n e m a S e ri e s I n -W a l l Su b w o o f e r E n c l o s ur e s
cinema series in-wall subwoofer enclosures feature a combination of ½" and 1" MDF materials for superior
isolation of bass; extruded aluminum bracing for minimal obstruction of airflow inside the enclosure; mass damping of
front and back walls of enclosure; long-strand fiberglass internal damping for standing wave dissipation; dual positive and
negative terminals for maximum wire durability; floating enclosure design minimizes vibration transfer to adjoining rooms;
fits in standard 2x4 stud bay; blank pre-construction plate for easy installation.
cinema series eNCLOSURES
Sonance Cinema SUB12-500 Enclosure
SPECIFICATIONS
Internal Volume
1.20 cubic feet (34.3 liters) of volume
Material
MDF wood box with long strand fiberglass acoustic
dampening material
CompatibilityFits the Sonance Cinema SUB12-500 only
Enclosure Dimensions (WxHxD) 141∕4" x 707∕8" x 37∕16" (362mm x 1800mm x 87mm)
Mounting Depth
33∕ 8” (85.7mm)
Mounting Bracket Width
161∕4” (409.5mm)
Hardware
Integrated L-bracket mounting system included
PART#................. 92876
QUANTITY.......... EACH
Sonance Cinema SUB10-250 Enclosure
SPECIFICATIONS
PART#................. 92874
QUANTITY.......... EACH
126
Internal Volume.80 cubic feet (22.6 liters) of volume
Material
MDF wood box with long strand fiberglass acoustic dampening material
CompatibilityFits the Sonance Cinema SUB10-250 only
Enclosure Dimensions (WxHxD) 141∕4" x 471∕4" x 37∕ 16" (362mm x 1200mm x 87mm)
Mounting Depth
33∕ 8” (85.7mm)
Mounting Bracket Width
161∕4” (409.5mm)
Hardware
Integrated L-bracket mounting system included
SONANCE
®
SERIES
visual performance series/original series retrofit enclosures
Rectangle retrofit enclosure
This glass-reinforced polypropylene enclosure reduces sound spillover into adjacent spaces by
20dB and reduces the effect of wall cavity variations. It is retrofittable on all Visual Performance
Series and Original Series rectangle speakers.
Large
Medium
Small
Part #
Quantity
MSRPDealer Price
92242PAIR
$110.00 $55.00
92342PAIROPEN $22.00
92442PAIROPEN $25.00
round and square retrofit ENCLOSUREs
This glass-reinforced polypropylene enclosure reduces sound spillover into adjacent spaces by
20dB and reduces the effect of wall cavity variations. It is retrofittable on all Visual Performance
Series and Original Series round and square speakers.
Part #
Quantity
MSRPDealer Price
92243PAIR
$110.00 $55.00
92343PAIROPEN $22.00
92443PAIROPEN $25.00
S P EAKE R a c c e s s o ri e s
Large
Medium
Small
Enclosures also fit Visual Performance and Original Series speakers.
MEDIUM LCR Retrofit Enclosure
Glass-reinforced polypropylene enclosure reduces sound spillover into adjacent spaces by
20dB and reduces the effect of wall cavity variations. The enclosure is retrofittable on Visual
Performance Series Medium LCR speakers.
PART#................. 92836
QUANTITY.......... PAIR
127
Invisible Series Backboxes
invisible series backboxes
Metal backboxes that reduce sound transmission into adjacent spaces and are required for all SA2
installations in spaces deeper than 4 inches. Available in 4-inch depth for walls (PBB4) and 6-inch
depth for ceilings (PBB6). UL 1480 certification.
PART# (PBB4)...... 40065
PART# (PBB6)...... 40066
QUANTITY.......... EACH
PBB4 Dimensions (W x H x D):
PBB6 Dimensions (W x H x D):
PBB4 Shipping Weight:
PBB6 Shipping Weight:
14¼" x 21¼" x 3¼" (362mm x 540mm x 83mm)
14¼" x 21¼" x 5¼" (362mm x 540mm x 133mm)
8.4 lbs (3.8kg)
10.1 lbs (4.6kg)
visual performance series/original series/contractor series fire-rated backcans
Fire-rated (listed) large round backcan
Provides 1-hour rating in accordance with ASTM E814-06, ASTM E119, UL263, NFPA251, CN/ULC S 101
when installed as part of a gypsum board ceiling assembly with an appropriate Sonance Flex Bracket.
Includes ceramic fiber insulation and Snap2it wire clamps. Painted steel construction. It can be used
with all Visual Performance Series and Original Series Large round speakers. WHI Design Listing
DII/PH60-04.
PART#................. 91908
QUANTITY.......... EACH
Mounting Plate Dims. (W x H):
Can Dimensions (W x H x D):
Cut-Out Diameter:
Shipping Weight:
17¾" x 18" (451mm x 457mm)
13" x 16½" x 6½" (330mm x 419mm x 165mm)
10 7/16" (265mm)
10 lbs (4.5kg)
fire-rated (listed) deep and shallow backcans
Provides 1-hour rating in accordance with ASTM E814-06, ASTM E119, UL263, NFPA251,
CN/ULC S 101 when installed as part of a gypsum board wall (shallow) or ceiling (deep) assembly
with an appropriate Sonance Flex Bracket. WHI Design Listing DII/PH60-09. Includes ceramic fiber
insulation and Snap2it wire clamps. Painted steel construction.
Available in shallow (3 15/32" — 88mm) and deep (5 31/32" — 152mm) models, and can be used with
all Sonance in-wall and in-ceiling speaker models except for the following models:
PART# (SHALLOW).....92807
QUANTITY.................EACH
PART# (deep).............92808
QUANTITY.................EACH
• All Visual Performance Series and Original Series Large Rectangle speakers
• Visual Performance Series VP67 LCR and Original Series 623 LCR
• All Ellipse Series speakers
• Cinema Series LCR1, LCR2, SUR1, SUR2
• Cinema Ultra II LCR, SUR, Cinema SUB, and Cinema TWO.SUB
• All Silhouette Series speakers
Mounting Plate Dims (W x H):
17¾" x 18" (451mm x 457mm)
Can Dimensions (W x H):
1215/16" x 1615/16" (329mm x 430mm)
Deep Can Depth:
5 31/32" (152mm)
Shallow Can Depth:
315/32" (88mm)
Shipping Weight:
13 lbs (5.9kg) — deep; 11 lbs (5.0kg) — shallow
Note: Architectural Series 5/8" Gypsum Panel Brackets are manufactured with QuietRock® 525, a
fire-rated material. They are compatible with the Fire-Rated Deep and Shallow Backcans.
CONTRACTOR series SQUARE FIRE-RATED BACKCAN
Provides 1 hour rating in accordance with ASTM E814-06, ASTM E119, UL263, NFPA251,
CN/ULC S 101 when installed as part of a gypsum board ceiling assembly. Painted steel construction. It
can be used only with Contractor Series C201SQ speakers.
PART#................. 91933
QUANTITY.......... EACH
128
Mounting Plate Dims (W x H):
Can Dimensions (W x H x D):
Cut-Out Dims. (W x H):
233∕4" x 19" (603mm x 483mm)
13" x 16½" x 3½" (330mm x 419mm x 89mm)
7 5∕ 16" x 7 5∕ 16" (185mm x 185mm)
I n -W a l l Tr e at m e n t s a n d E l e c t r o n i c s
Sonance in-wall treatments and electronics bring installed speaker systems to their ultimate level of performance.
In-Wall Treatments
Sonafill In-wall and In-ceiling Acoustic Dampening
A two-part system providing passive resonance control, SonaFill® greatly improves the
performance of in-wall and in-ceiling speakers. Acoustic dampening tiles damp drywall
resonances while absorptive pillows absorb sound within the wall or ceiling cavity. They can
be used in new construction as well as retrofit installations. Originally developed for noise
cancellation in the hulls of submarines.
SPECIFICATIONS
Design:Acoustic damping system for in-wall and in-ceiling
applications
Mounting Method:Self-adhesive mounting plates
Dimensions (W x H x D):
In-Wall:
12" x 12" x 6" (305mm x 305mm x 152mm)
In-Ceiling:
16" x 16" x 12" (406mm x 406mm x 304mm)
1 lbs (0.45kg)
Weight (In-Wall):
2 lbs (0.9kg)
Weight (In-Ceiling):
PART# (In-wall).......91698
QUANTITY.................EACH
PART# (In-ceiling)...91928
QUANTITY.................EACH
Vapor barriers minimize the escape of warm air from the living space
through the speaker location. Sonance Vapor Barriers are thin, flexible,
and self-extinghishing. Fits 16-inch on-center stud construction. It can be
stapled or glued to studs. We recommend stuffing the Vapor Barrier with
3" of non-backing type fiberglass or other damping material to reduce
resonances.
SPECIFICATIONS
Construction:PVC
Dimensions (W x H x D): 14" x 22" x 3½"
(355mm x 559mm x 89mm)
Net Weight: 5 oz each
PART#................. 91703
QUANTITY.......... 12 PAIR
S P EAKE R a c c e s s o ri e s
VAPOR BARRIER
invisible series electronics
icc installation compensation circuit
The ICC is a 2-channel active equalizer specifically-designed to provide correction for SA2
speaker performance variations due to surface finish and installation placement. Provides
variable low-frequency and high-frequency equalization tailored to maximize SA2 performance,
as well as spatial enhancement circuitry that expands the stereo soundstage. Occupies 1U in a
standard 19 inch equipment rack (½-rack width). Includes rackmount extension panel, panel link
and hardware.
specifications
Inputs:
Unbalanced (gold-plated RCA)
Outputs:
Processed; direct (gold-plated RCA)
Controls: LF compensation, HF compensation,
Spatial enhancement, output level, cavity compensation
Dimensions (W x H x D):
91∕ 2" x 123∕ 32" x 5" (241mm x 44mm x 128mm)
1U (½-rack width)
Rack Space Requirements:
Shipping Weight:
2.9 lbs (1.4kg)
PART#................. 40067
QUANTITY.......... EACH
129
ELECTRONICS and
electronic accessories
An elite audio system is only as good as its individual components. At Sonance, we have taken this
philosophy to heart and developed a full line of amplifiers, control electronics, and accessories that allow
your system to perform at its peak. Our passion for an unparalleled audio experience shows in every detail, and the breadth of our line of accessories enables you to configure a custom system that meets your
needs precisely.
S o n a n c e S o n a mp Amp l i f i e r s
At Sonance, the engineers working on our Sonamp® amplifiers have a simple mission: Make amplifiers that are
worthy of driving our loudspeakers. They accomplish this by designing amplifiers that are focused on reliability and
that maintain the highest levels of performance in the most demanding multi-room applications. With its long history
of innovation and a reputation for rugged reliability, it's no wonder that Sonamps continue to enjoy a loyal following
among top A/V integrators.
sonamp multi-channel amplifiers
sonamp 875D MKII SPECIAL FEATURES Highly
efficient ICEpower® digital amplification • 65 watts
RMS x 8 @ 8 ohms • Bridgeable to 250 watts
RMS x 4 @ 8 ohms • Serial control capability
(including volume control) via RS-232 connection
• Compact 2U rack height chassis expands installation
options (rack-mount ears included) • Individual protection
circuitry for each zone • BBE® sound enhancement
circuitry • Versatile input connections • Buffered line
outputs • 12V input and output triggers and defeatable
auto-on signal sensing • Defeatable high-pass filter
(–3dB @ 27Hz) protects in-wall volume controls • Frontpanel Zone Status, BBE ON and Fault LEDs for each zone
• Available in 120V and 230V versions
SPECIFICATIONS
Number of Channels:
8 (four stereo pairs)
Power Output: 65 watts RMS per channel (x 8) @ 8 ohms
120 watts RMS per channel (x 8) @ 4 ohms
Power Output (Bridged):
250 watts RMS per channel (x 4) @ 8 ohms
Frequency Response:
20Hz – 20kHz, ±1dB (hi-pass filter OFF)
-3dB @ 27Hz (hi-pass filter ON)
Total Harmonic Distortion:
0.10% (1kHz, 8 ohms)
0.25% (1kHz, 4 ohms)
Signal to Noise Ratio:
-96dB (w/22kHz A-WTG filter)
Input Sensitivity:
1.0V for 65W RMS @ 8 ohms
850mV w/BBE on (+3dB)
650mV w/BBE on (+6dB)
10k ohms
Input Impedance:
Max Source Input Voltage:
4.0 VAC RMS
3.0 VAC RMS w/BBE on
Loop Output Impedance (Buffered): 100 ohms
Serial Protocol (RS-232 Connection): 9600 Baud, N, 8, 1, single CR
Power Consumption:
1,200 watts maximum (4 ohms, full power)
AC Fuse (120V Version):
10A (T10AL ~ 250V)
AC Fuse (230V Version):
6.3A (T6.3AL ~250V)
Heat Output:
288 BTU/hour (8 ohms, rock music)
553 BTU/hour (4 ohms, rock music)
Dimensions (W x H x D):
16½" x 3½" x 171∕4" (419mm x 98mm x 438mm)
Dimensions (w/Rack Ears, W x H x D): 19" x 3½" x 171∕4" (483mm x 98mm x 438mm)
Rack Space Requirements:
2U (rack-mount ears included)
Shipping Weight:
24 lbs (10.9kg) each
PART# (120V)..... 92804
QUANTITY.......... EACH
PART# (230V)..... 92805
QUANTITY.......... EACH
SONA M P mu lt i - c h a n n e l P O W E R A M P L I F I E R S
Sonamp 875D MKII Multi-Channel Amplifier
131
sonamp multi-channel amplifiers
SONAMP 1250 MKII special features 50 watts RMS x 12
@ 8 ohms, 75 watts RMS x 12 @ 4 ohms • Bridgeable to 100
watts RMS x 6 @ 8 ohms • Configurable input signal routing
(left, right, aux and direct) • Nut-mounted audiophile RCA
connectors can handle enhanced audio cables • Goldplated 5-way binding post speaker connectors • Discrete
volume control for each channel • Buffered outputs (left,
right and aux busses) allows expansion to 24/36/48
channels • Switched 12V DC output controls external devices
such as screens, relay boxes, and mechanical lifts • External
control input (5~24 volts AC/DC, opto-isolated) • Auto-On
mode switch (adjustable audio, voltage or defeat) • Available
in standard and rack-mount (RMF) versions
SONAMP 1250 MKII
SPECIFICATIONS
Number of Channels:
Power Output: Frequency Response:
Dynamic Headroom: Total Harmonic Distortion: PART#................. 91784
QUANTITY.......... EACH
IM. Distortion (SMPTE 4:1): Signal-to-Noise Ratio:
Input Sensitivity: Input Impedance: Power Consumption: AC Fuse: Heat Output: Dimensions (W x H x D): RMF Dimensions (W x H x D):
Rack Space Requirements:
Shipping Weight: 12 (six stereo pairs)
50 watts RMS per channel (x 12) @ 8 ohms;
75 watts RMS per channel (x 12) @ 4
(all channels driven)
ohms
Power Output (bridged):100 watts RMS per channel x 6 @ 8
ohms
20Hz – 20kHz +1/-3dB
+1.9dB x 12 @ 8 ohms;
+1.8dB x 12 @ 4 ohms;
±3.5dB x 6 @ 8 ohms (bridged)
<0.03% (20Hz – 20kHz @ 8 ohms, 50 watts) <0.06% (20Hz – 20kHz @ 4 ohms, 75 watts)
<0.01% (1kHz @ 8 ohms, 50 watts);
<0.01% (1kHz @ 4 ohms, 75 watts)
<0.01% (50 watts @ 8 ohms)
-100dB (w/22kHz A-WTG filter)
700 millivolts for 50 watts RMS @ 8 ohms
20k ohms
1800 watts maximum (4 ohms, full power);
8 watts idle (no signal)
15A (3AG 15A~120V)
930 BTU/HR (8 ohms, rock music)
1395BTU/HR (4 ohms, rock music)
16¾" x 9½" x 16½" (425mm x 241mm x 420mm)
19" x 8¾" x 16½" (483mm x 222mm x 420mm)
5U
55 lbs (25kg)
PART# (RMF)....... 91785
QUANTITY.......... EACH
PART#................. 141020
QUANTITY.......... EACH
SONAMP 1250 MKII RMF facePLATE ONLY
Rack-mount faceplate converts 1250 MKII to 1250 MKII RMF
132
SONAMP MULTI-CHANNEL AMPLIFIERs
SONANCE
SERIES
®
SONAMP 1230 special features 30 watts RMS x 12
@ 8 ohms, 45 watts RMS x 12 @ 4 ohms • Bridgeable
to 60 watts RMS x 6 @ 8 ohms • Configurable input
signal routing (left, right, aux and direct) with gold-plated
connectors • 5-way binding post speaker connectors
• Discrete volume control for each channel • Buffered
outputs (left, right and aux busses) allows expansion to
24/36/48 channels • Switched 12VDC output controls
external devices such as screens, relay boxes, and
mechanical lifts • External control input (5~24 volts AC/
DC, opto-isolated) • Auto-On mode switch (adjustable
audio, voltage or defeat) • Available in standard and
rack-mount (RMF) versions, both in 120V and 230V
SONAMP 1230
SPECIFICATIONS
Number of Channels:
Power Output: PART# (120V)............91779
QUANTITY.................EACH
PART# (230V)............91781
QUANTITY.................EACH
PART# (RMF, 120V).....91780
QUANTITY.................EACH
PART# (RMF, 230V).....91782
QUANTITY.................EACH
SONAMP 1230 RMF facePLATE ONLY
Rack-mount faceplate converts 1230 to 1230 RMF
SONA M P mu lt i - c h a n n e l P O W E R A M P L I F I E R S
Power Output (bridged):
Frequency Response:
Total Harmonic Distortion: IM. Distortion: (SMPTE 4:1):
Signal to Noise Ratio: Input Sensitivity: Input Impedance: Power Consumption: AC Fuse (120V Version): AC Fuse (230V Version): Heat Output: Dimensions (W x H x D): RMF Dimensions (W x H x D): Rack Space Requirements:
Shipping Weight: 12 (six stereo pairs)
30 watts RMS per channel (x 12) @ 8 ohms
(all channels driven) 45 watts RMS per channel (x 12)
@ 4 ohms
60 watts RMS per channel (x 6) @ 8 ohms
20Hz – 20kHz ±1dB
<0.03% 20Hz – 20kHz @ 8 ohms (30W RMS)
<0.10% 20Hz – 20kHz @ 4 ohms (45W RMS)
<0.01% @ 30 watts, 8 ohms
-100dB (w/22kHz A-WTG filter)
700 millivolt for 30 watts RMS @ 8 ohms
20k ohms
1400 watts maximum (4 ohms, full power);
8 watts idle (no signal)
10A (F10AL~250V)
5A (F5AL~250V)
558 BTU/hour (8 ohms, rock music)
837 BTU/hour (4 ohms, rock music)
163∕4" x 5¾" x 16½" (425mm x 146mm x 419mm)
19" x 51∕4" x 16½" (482mm x 133mm x 419mm)
3U
47 lbs (21.4kg)
PART#................. 141016
QUANTITY.......... EACH
133
sonamp two-channel amplifiers
SONAMP 275 SE special features 75 watts RMS x 2 @
8 ohms, 125 watts RMS x 2 @ 4 ohms, 135 watts RMS x
2 @ 2.6 ohms • Bridgeable to 270 watts @ 8 ohms (275
SE only) • Factory-installed BBE SAT® module • Built-in
connections and switching for 3 speaker pairs (275X3 SE
only) • Defeatable high-pass filter (–3dB @ 27Hz) protects
in-wall volume controls • Control voltage can trigger BBE
effect on/off and change effect amount • BBE status LEDs
• Line level outputs for daisy-chaining multiple amplifiers
• Tamper-resistant, recessed power switch prevents accidental
turn-off • Recessed input level and auto-on sensitivity controls
• Selectable auto-on delay prevents current surge when
using multiple amplifiers • Ground lift switch • High-current
amplifier topology can operate at 2.6 ohms • Defeatable
auto-on signal sensing • Active current limit, short-circuit and
speaker protection • Signal preset LEDs • Protect/clipping
LEDs for easy level setup • Auto-resetting thermal protection
shutoff • In-rush current-limiting circuit • Available in standard
and rack-mount (RMF) versions • Available in 120V and 230V
versions (275X3 SE only available in 120V)
sonamp 275 se
SPECIFICATIONS
PART# (120V)............92187
QUANTITY.................EACH
PART# (230V)............92191
QUANTITY.................EACH
PART# (RMF, 120V)...... 92188
QUANTITY.................EACH
Number of Channels:
2 (one stereo pair)
Power Output: 75 watts RMS (x 2) @ 8 ohms;
(both channels driven)
135 watts RMS (x 2) @ 4 ohms;
175 watts RMS (x 2) @ 2.6 ohms
250 watts RMS (x 1) @ 8 ohms
Power Output (bridged):
270 watts RMS (x 1) @ 8 ohms
Power Output (bridged, 1kHz):
Frequency Response:
20Hz – 20kHz ±1dB (hi-pass filter OFF)
-3dB @ 27Hz (hi-pass filter ON)
Total Harmonic Distortion: <0.05% (20Hz – 20kHz @ 8 ohms);
<1.0% (20Hz – 20kHz @ 4 ohms);
(stereo mode)
<0.2% (20Hz – 20kHz @ 2.6 ohms)
Signal-to-Noise Ratio:
-100dB (w/22kHz A-WTG filter)
700mv for 75 watts RMS @ 8 ohms;
Input Sensitivity: 550mV w/BBE ON +6dB;
350mV w/BBE ON +9dB
Power Consumption: 800 watts maximum (2.6 ohms, full power);
6 watts idle (no signal)
AC Fuse (120V Version):
5A (T5AL~250V)
AC Fuse (230V Version):
2.5A (T2.5AL ~250V)
232 BTU/HR @ 8 ohms (rock music)
Heat Output: 418 BTU/HR @ 4 ohms (rock music)
542 BTU/HR @ 2.6 ohms (rock music)
Dimensions (W x H x D): 163∕ 4" x 37∕ 8" x 151∕ 4" (425mm x 98mm x 387mm)
Dimensions w/Rack Ears (W x H x D): 19" x 37∕ 8" x 151∕4" (483mm x 98mm x 387mm)
Rack Space Requirements:
2U
Shipping Weight: 24 lbs (10.9kg)
PART# (RMF, 230V).....92192
QUANTITY.................EACH
sonamp 275x3 se
Identical to the 275 SE, with the addition of three built-in speaker switches for increased flexibility.
Bridging not available. Available only in 120V version.
SPECIFICATIONS (Identical to 275 SE)
PART#................. 92189
QUANTITY.......... EACH
PART# (RMF)....... 92190
QUANTITY.......... EACH
134
SONANCE
SERIES
SONAMP 2120T MKII special features 120 watts
®
sonamp two-channel amplifiers
RMS
x 2 @ 8 ohms, 160 watts RMS x 2 @ 4
ohms • Line-level outputs for daisy-chaining multiple
amplifiers • Defeatable high-pass filter (–3dB @ 27Hz)
protects in-wall volume controls • Ground lift switch
• High-current amplifier topology • Defeatable auto-
on signal sensing • Active current limit, short-circuit
and speaker protection • Recessed front-panel volume
controls • Auto-resetting thermal protection shutoff
• In-rush current-limiting circuit • Available in standard
and rack-mount (RMF) versions, both in 120V and 230V
SONAMP 2120T MKII
SPECIFICATIONS
Number of Channels:
Power Output
(both channels driven):
Dynamic Power at Clipping: I.M. Distortion (SMPTE 4:1):
Signal-to-Noise Ratio: Input Sensitivity: Input Impedance: Power Consumption: AC Fuse (120V Version):
AC Fuse (230V Version):
Heat Output: Dimensions (W x H x D):
RMF Dimensions (W x H x D): Rack Space Requirements:
Shipping Weight: PART# (120V)............91122
QUANTITY.................EACH
PART# (230V)............91602
QUANTITY.................EACH
PART# (RMF, 120V).....91131
QUANTITY.................EACH
PART# (RMF, 230V).....91649
QUANTITY.................EACH
SONA M P t w o - c h a n n e l P O W E R A M P L I F I E R S
Frequency Response:
Total Harmonic Distortion:
2 (one stereo pair)
120 watts RMS (x 2) @ 8 ohms;
160 watts RMS (x 2) @ 4 ohms
163 watts (x 2) @ 8 ohms;
242 watts (x 2) @ 4 ohms
20Hz – 20kHz ±0.25dB (hi-pass filter OFF)
-3dB @ 27Hz (hi-pass filter ON)
0.05% 20Hz – 20kHz @ 8 ohms (120 WRMS);
0.1% 20Hz to 20kHz @ 4 ohms (160 WRMS)
0.02% @ 1 watt (8 ohms);
0.02% @ 120 watts (8 ohms)
-100dB (w/22kHz A-WTG filter)
1.1V for 120 watts RMS @ 8 ohms;
1.0V for 100 watts RMS @ 8 ohms
47k ohms
750 watts maximum (4 ohms, full power);
6 watts idle (no signal)
10A (3AG 10A ~ 250V)
5A (3AG 5A ~ 250V)
372 BTU/HR @ 8ohms (rock music)
496 BTU/HR @ 4ohms (rock music)
163∕4" x 5 5∕ 8" x 12 5∕ 8" (425mm x 143mm x 321mm)
19" x 51∕4" x 12 5∕ 8" (483mm x 133mm x 321mm)
3U
26 lbs (11.8kg)
135
sonamp ASAP two-channel amplifiers
SONAMP ASAP3D SE special features Automatic House/
Local source switching • Highly efficient ICEpower digital
amplification • BBE sound enhancement • IR-controllable
(volume, muting, BBE ON/OFF, input switching) • Defeatable
high-pass filter (–3dB @ 27Hz) protects in-wall volume controls
• 12V input and output triggers • Defeatable auto-on signal
sensing • AC triggering (via rear-panel connection) • Mono
fixed/variable output allows connection of a powered subwoofer
• Recessed front-panel volume controls • House/Local source
switching delay and audio trigger sensitivity adjustments
• IR pass-thru connection passes 3rd-party control signals
to optional IR emitters • IR Bus connection links IR signals
from multiple ASAP3D SEs to a single set of emitters • 1U rack
height, ½-rack width • Available in 120V and 230V versions
ASAP3D SE
PART# (RMF, 120V).....92446
QUANTITY.................EACH
PART# (RMF, 230V).....92447
QUANTITY.................EACH
Rack Filler Panel
(1U h x ½-Rack w)
PART#........................92729
QUANTITY.................EACH
SPECIFICATIONS
Number of Channels:
Power Output: (both channels driven)
Frequency Response: Total Harmonic Distortion: Signal to Noise Ratio: Input Sensitivity: Input Impedance: Max Source Input Voltage: Power Consumption: Heat Output: AC Fuse (120V Version): AC Fuse (230V Version): Dimensions (W x H x D): Rack Space Requirements: Shipping Weight: 2 (one stereo pair)
25 watts RMS (x 2) @ 8 ohms;
50 watts RMS (x 2) @ 4 ohms
20Hz – 20kHz +1/-3dB (hi-pass filter OFF)
-3dB @ 27Hz (hi-pass filter ON)
0.10% (1kHz, 8 ohms); 0.25% (1kHz, 4 ohms)
-94dB (w/22kHz A-WTG filter);
-88dB (with AC-sensing trigger)
900mV for 25W RMS output
700mV w/BBE ON (+3dB)
500mV w/BBE ON (+6dB)
13k ohms
2.3VAC RMS; 1.3VAC RMS w/BBE ON
250 watts maximum (4 ohms, full power);
17 watts idle (no signal)
28 BTU/HR @ 8 ohms (rock music);
55 BTU/HR @ 4 ohms (rock music)
2A (T2AL ~ 250V);
1.25A (T1.25AL ~250V)
9½” x 1¾” x 12½” (241mm x 45mm x 318mm)
1U (½-rack width)
7.0 lbs (3.2kg)
sonamp ASAP two-channel amplifiers
SONAMP ASAP1D special features Automatic House/Local
source switching • Local source line-level and speaker-level
connections • House source speaker-level connections
• Mono line output connects to powered subwoofers
• Auto-on signal sensing • Video Trigger connection
• House/Local source switching delay and audio trigger
sensitivity adjustments • Included mounting kit permits wallmounting
ASAP1D
SPECIFICATIONS
PART#................. 90758
QUANTITY.......... EACH
136
Number of Channels:
Output Power: Stereo: Frequency Response:
Signal-to-Noise Ratio: Input Sensitivity:
Input Impedence:
Max. Source Voltage Input:
Power Consumption:
Heat Output:
Dimensions (W x H x D): Shipping Weight: 2 (one stereo pair)
25 watts RMS per channel, 0.10% THD, 1kHz, @8 ohms
35 watts RMS per channel, 0.25% THD, 1kHz, @4 ohms
20Hz – 20kHz +1/-3dB
-95dB (w/22kHz A-WTD filter)
485mV for 25W RMS output
47k ohms
2.3VAC RMS
140 watts maximum (4 ohms, full power);
18 watts idle (no signal)
43 BTU/hr @8 ohms (rock music)
60 BTU/hr @4 ohms (rock music)
125∕ 8" x 3" x 4 5∕ 8" (321mm x 77mm x 118mm)
7 lbs (3.2kg)
Sonance Hom
e Au d i o
SONANCE
SERIES
®
Sy s t e m s
The C4630 SE can play any of four different audio sources in up to six different zones at the same time and gives
you easy, logical control of both the system’s audio sources and the sound in each room. The C4630 SE is controlled
by C4630 SE Main and Numeric Keypad Controllers (available separately) or by the Sonance Navigator® K2 and K1
keypads. Extensive macro programming allows complex C4630 SE and source component functions to be accomplished
with a single button push. Up to four C4630 SEs can be linked to create systems of up to 24 zones with the same simplicity
of control. The C4630 SE can also be serial-controlled by third-party control systems via its RS-232 connection.
sonance c4630 se home audio system
programming software CD-R and upgrade cable included
• Extensive macro capability • RS-232 port for
external serial control • Extensive IR outputs (Six
zone-specific, four common, four programmed)
• Sync connections link multiple C4630 SE
units for unified control in expanded systems
• Upgradable firmware • Optional IR remote • Rack ears
included • Available in 120V and 230V versions
C4630 SE Home Audio System
Specifications:
Number of Channels:
12 (6 stereo zones)
Power Output: 30 watts RMS/ch x 12 @ 8 ohms
Frequency Response:
20Hz – 20kHz ±1dB
Total Harmonic Distortion:
0.1% (20Hz – 20kHz); 0.05% (1kHz)
Signal-to-Noise Ratio:
-95dB
Source Input Sensitivity/Impedance: 200mV/30k ohms
Source Input Voltage (max):
2.0VAC RMS
Source Output Impedance:
100 ohms (buffered)
Zone Line Output Impedance:
100 ohms
1:1 (unity gain)
Zone Line Output Level (Fixed):
Zone Line Output Level (Variable):
0dB ~ +19dB (all volume settings at maximum)
Source Inputs:
4 stereo RCA connectors
Source Loop Outputs:
4 stereo RCA connectors
Zone Line Outputs:
6 stereo RCA connectors
Speaker Outputs:
6 removable 4-pin screw connectors
Paging Connections:
1 mono RCA (input) 1 mono RCA (output)
Keypad Connections:
6 RJ45 connectors
IR Outputs:
6 zone-specific, 4 common, 4 programmable, 1 IR link
Serial Control:
RS-232 connector
Serial Protocol (Inbound):
19,200 baud, 8, N, 1
Serial Protocol (Outbound):Adjustable
Sync Connections:Two mono 3.5mm connectors
Computer Connection:
1 x USB
Heat Output:
603 BTU/HR @ 8 ohms (rock music)
Power Requirements: 120VAC, 60Hz
960 watts maximum (12 channels driven)
Power Consumption:
AC Convenience Outlets:
2 switched outlets
Dimensions (W x H x D):
16¾" x 6" x 15" (425mm x 152mm x 381mm)
Dimensions w/Rack Ears (W x H x D): 19" x 6" x 15" (489mm x 152mm x 381mm)
Rack Space Requirements:
3U
Shipping Weight:
33 lbs (15kg) each
PART# (120V)..... 92293
QUANTITY.......... each
PART# (230V)..... 92294
QUANTITY............EACH
SONA M P t w o - c h a n n e l / w o o f e r / s u b w o o f e r P O W E R A M P L I F I E R S
Special Features Four-source, six-zone, distributed
audio matrix and control system • Six zone speakerlevel stereo outputs • Four source inputs and four
buffered line-level audio outputs • Six zone linelevel audio outputs (fixed or variable) • Individual BBE
sound enhancement for each of the 4-source inputs •
Paging input connections • Connections for up to six
Sonance keypad controllers • Sonance Control Manager
137
sonance c4630 SE accessories
C4630 SE Main Keypad
In-wall keypad for C4630 SE. Four interchangeable Source buttons, Volume Up/Down, Mute,
and Off buttons. Three control levels (press, double-press, press-and-hold). Offers extensive
macro capability from any button. Built-in holster can accept FSMR1 or MR1 IR receiver (available
separately). Adjustable backlighting (defeatable). Source buttons can be renamed with included
button membranes. Installs in a standard single gang electrical box.
Specifications:
PART#................. 92295
QUANTITY.......... EACH
Controls:Source select (1 – 4), volume up/down, mute, off,
source control (forward, backward, pause, play)
Keypad Connection:
RJ45
Backlight Levels:Bright, dim, off
Wall Plate Bezel Color:
White (included)
Compatible IR Receivers:FSMR1, MR1 (available separately)
C4630 SE Numeric Keypad
In-wall slave keypad for C4630 SE Main Keypad. Has numeric 1 – 0, “+” and “–“ buttons. Three
control levels (press, double-press, press-and-hold). Offers extensive macro capability from any
button. Installs in a standard double gang electrical box (along with a C4630 SE Main Keypad).
Specifications:
PART#................. 92296
QUANTITY.......... EACH
Controls:Numeric 1 – 0, +, –
Backlight levels:Bright, dim, off (slaved to C4630 SE Main Keypad)
Keypad connection:
15-pin ribbon (connects to C4630 SE Main Keypad)
White (included)
Wall Plate bezel color:
C4630 SE IR Remote Control
IR remote control that duplicates all C4630 SE Main and Numeric Keypad functions, plus “All OFF”
and “OK” buttons. Operates via FSMR1 or MR1 IR receiver installed in a C4630 SE Main Keypad.
Specifications:
Part#................. 92297
Quantity.......... Each
Local-Zone Controls:
Volume, source, mute, off
All-Zone Controls:All-On, All-Off (“Party Mode”)
Numeric Controls:
0 – 9, “+”, “–”
Source Component Controls:
Play, pause, forward, backward, OK
(will mirror keypad programming)
C4630 SE Main Keypad Membrane Kit
Part#................. 92340
Quantity.......... 1 Sheet
138
Replacement for the button membrane included with the C4630 SE Main Keypad. Contains 66
popular source components that let you customize keypads for the particular sources used in the
C4630 SE system.
SONANCE
®
SERIES
sonance c4630 se accessories
C4630 SE main and numeric Keypad Faceplate Kits
Includes keypad bezel insert and Decora faceplate. Shipped 6 per package.
for Main Keypad
Part# (white)....... 92345
Part# (ivory)....... 92346
Part# (almond).. 92347
Part# (brown).... 92348
Part# (black)...... 92349
Quantity (All)..... 6-Pack
for Numeric keypad
Part# (white)....... 92350
Part# (ivory)....... 92351
Part# (almond).. 92352
Part# (brown).... 92353
Part# (black)...... 92354
Quantity (All)..... 6-Pack
Permits connecting two C4630 SE Main/Numeric keypad sets to a single C4630 SE zone keypad
connection.
Part#................. 92355
Quantity.......... Each
c 4 6 3 0 s e a c c e s s o ri e s
RJ-45 2-Female to 1-Male Adapter
139
S o n a n c e K e ypa d C o n t r o l l e r s
Sonance Navigator K2 and K1 programmable keypads provide the installer with flexible control options for the C4630 SE Home
Audio System. The K2 features hard-key and soft-key operation, providing sophisticated control options. The K1 features hardkey operation that simplifies programming and provides more basic control options. Both keypads are programmed by the
simple and easy-to-use K1/K2 Program Manager software. Shallow depth of less than two inches allows use in international
installations.
sonaNCE navigator k2 programmable keypad controller
SPECIAL FEATURES Fits in most standard new construction
double-gang electrical boxes • Self-mounts in retrofit
installations with integral dog-toggles • High-contrast, high
viewing-angle 64 x 128 pixel black and white LCD display
with white LED backlighting • Backlit source buttons • Built-
in IR receiver • Includes 72 additional hard-source button
membranes • Power button glows red, green, or orange to
indicate zone power status • Navigator K1/K2 programming
software is downloadable from www.sonance.com
NAVIGATOR K2
Includes programming cable and white wall plate.
SPECIFICATIONS
PART#................. 91975
QUANTITY.......... EACH
Hard-Key Buttons:
Volume up/down, channel up/down, power on/off,
six programmable function/source buttons
LCD Touchscreen:
64 x 128 pixel, high-contrast
IR Output: 1 (200mA)
RS-485 Connection:1 (half-duplex RJ45 connection for future capabilities —
not active at press time)
Power Sense Input:
1 (monitored)
Relay Output:
1 (100mA)
Auxiliary Input:
1 (monitored)
Keypad Sync I/O Port:
1 (syncs multiple keypads to the same page/source)
Power Requirement: 12V DC at 250mA
4½" x 4½" x 113∕ 16" (114mm x 114mm x 46.5mm)
Dimensions (W x H x D): 311∕ 16" x 3¼" x 113∕ 16" (93mm x 82mm x 46.5mm)
In-Wall Dimensions (W x H x D):
sonaNCE navigator k1 programmable keypad controller
SPECIAL FEATURES Single-gang, shallow-depth for easy
installation • Hard-key function buttons are easy to use
and program • Flexible programming capabilities for use
with a majority of control systems • Six fully-programmable
function/source buttons for component control • Dedicated
volume, channel, and power buttons • Easily programmable
with Navigator K1/K2 programming software • Includes
programming cable • Includes extra button membranes for
simple customization
NAVIGATOR K1
Includes programming cable and white wall plate.
SPECIFICATIONS
PART#................. 92001*
QUANTITY.......... EACH
140
Hard-Key Buttons:Volume up/down, channel up/down, power on/off,
six programmable function/source buttons
IR Output:
1 (200mA)
IR Pass-Through:
1
RS-485 Connection:1 half-duplex RJ45 connection for future
capabilities (not active at press time)
Power Sense Input:
1
Speaker Relay Trigger Output:
1
Keypad Sync Port:
1 (input/output)
Programming Port:
1 (3-pin, serial)
Size:Fits single-gang J-Box or P-Ring
Color:Decora white
SONANCE
®
SERIES
sonance navigator keypad accessories
Navigator k2 MEMBRANE KIT
72 buttons per kit.
PART#.................... 91949
QUANTITY............. EACH
Available in black, almond, ivory and white. Sold in 6 packs.
PART# (BLACK)...... 91945
PART# (ALMOND).. 91946
PART# (IVORY)....... 91947
PART# (WHITE)....... 91948
QUANTITY............. 6-PACK
NAVIGATOR K1 Wall plateS*
Available in black, almond, ivory and white. Sold in 6 packs.
*While supplies last.
PART# (WHITE)....... 92058
PART# (BLACK)...... 92059
PART# (ALMOND).. 92060
PART# (IVORY)....... 92061
QUANTITY............. 6-PACK
s o n a n c e n a vig at o r K e ypa d c o n t r o l l e r s a n d a c c e s s o ri e s
NAVIGATOR K2 Wall plateS
141
S o n a n c e Sp e a k e r Di s t ri b u t i o n Sy s t e m s
Independent volume control, impedance matching systems and accessories. All are designed to distribute speaker level signals from an
amplifier or receiver to up to four pairs (SS4 and SS4VC) or six pairs (SS6 and SS6VC) of speakers and single-pair volume controls.
SSVC speaker selectors feature independent 12-step volume controls and are designed to connect four and six pairs of speakers to one
receiver or amplifier. Each pair of speakers can be independently turned on or off by a flush-mount switch. All products are boating
and RV compatible.
sonance speaker distribution systems
SPECIAL FEATURES Quick install with new screwless quick
connectors • Advanced amplifier overload protection
• Defeatable impedance-protection circuit • User-friendly
button labels to customize on/off buttons with the
corresponding area • Rack-mount ears included with all
models
SS6VC Speaker selector with volume control
SPECIFICATIONS
PART#................. 91932
QUANTITY.......... EACH
Speaker Outputs:6 stereo pairs (14 AWG wire capacity)
Volume Control Type: 12-position light-touch silent rotary switch
(“Make Before Break”)
Total Attenuation: -42dB
Attenuation Steps: Top 7 steps are -3dB per step, lowest 4 steps are
-6dB per step
Frequency Response: 20Hz – 20kHz ±1dB
Speaker Impedance: 8 ohms per zone
75 watts RMS maximum input per channel
Power Rating: Dimensions (W x H x D): 167∕ 8" x 13∕4" x 101∕4" (429mm x 45mm x 260mm)
RMF Dimensions (W x H x D): 19" x 13∕4" x 101∕4" (483mm x 45mm x 260mm)
1U (Rack ears included)
Rack Space Requirements:
SS4VC Speaker selector with volume control
SPECIFICATIONS
PART#................. 91931
QUANTITY.......... EACH
(Identical to SS6VC except):
Speaker Outputs:4 stereo pairs (14 AWG wire capacity)
SS6 SPEAKER SELECTOR
SPECIFICATIONS
PART#................. 91369
QUANTITY.......... EACH
Speaker Outputs:6 stereo pairs (12AWG wire capacity)
Source Input:
1 (speaker-level)
Power Handling Capacity: 120W/ch without protection engaged;
40W/ch with protection engaged
Speaker Protection:Manual slide switch on bottom of switcher — maintains
a 5-ohm load to protect the amplifier
Ground Paths:Separate left and right channel (ensures compatibility
with all amps, even bridged)
Dimensions (W x H x D): 111∕4" x 2" x 7" (286mm x 51mm x 178mm)
Shipping Weight: 3 lbs (1.4kg)
SS4 SPEAKER SELECTOR
SPECIFICATIONS
PART#................. 91368
QUANTITY.......... EACH
142
(Identical to SS6 except):
Speaker Outputs:4 stereo pairs (12AWG wire capacity),
Dimensions (W x H x D): 8½" x 2" x 7" (286mm x 51mm x 178mm)
S o n a n c e I mp e d a n c e - M at c hi n g V o l um e C o n t r o l s
When properly implemented, the VC60SIM andVC60RIM impedance-matching stereo volume controls allow the safe
use of multiple pairs of speakers with amplifiers not specifically designed to run the low-impedance loads presented by
multiple speakers. They all feature 12 control positions, soft-touch action and silent switching capability. The VC60RIM
incorporates a rotary control; the VC60SIM incorporates a slider control. The VC60SIM and VC60RIM can be safely
used with amplifiers that deliver up to 60 watts RMS per channel.
sonance impedance-matching volume controls
60W RMS/ch, (unlike L-pads which dissipate current in
the form of heat) • Removable 4-pin screw connectors
simplify speaker and amplifier wiring • Fits standard
single or double J-boxes (with back panel removed) •
Includes Decora (both models) and standard (VC60RIM)
mounting hardware
VC60SIM 60-watt impedance-matching volume control –
SLIDER
Includes Decora wall plate.
SPECIFICATIONS
Speaker Impedance: Amplifier Impedance:
8 ohms
8 ohms (X1 setting); 16 ohms (X2 setting);
32 ohms (X4 setting); 64 ohms (X8 setting)
Connections: 4-pin screw terminals (14 AWG wire capacity)
Frequency Response: 20Hz – 20kHz ±1dB
Power Rating: 60 watts RMS maximum input/channel
Shipping Weight: 2 lbs (0.9kg)
PART# (WHITE)....... 92161
QUANTITY............. EACH
VC60RIM 60-watt impedance-matching volume control –
ROTARY
Rotary version of VC60SIM. Includes standard and Decora wall plates.
SPECIFICATIONS (Identical to VC60SIM)
PART# (WHITE)....... 92158
QUANTITY............. EACH
s o n a n c e imp e d a n c e - m at c hi n g v o l um e c o n t r o l s
SPECIAL FEATURES Allows attenuation of amplifier
volume to one pair of speakers • Impedance jumpers
allow up to 8 speaker/volume control sets (8-ohm
speakers) to be safely used with a single 8-ohm capable
amplifier • Impedance jumpers can also be used to
balance maximum output levels in different-sized rooms
• Handles high-current signal from amplifiers up to
replacement impedance jumpers
Replacement for VC60RIM/SIM impedance jumpers. Sold in packs of six.
PART# ................... 70089
QUANTITY............. 6-PACK
143
S o n a n c e S ta n d a r d V o l um e C o n t r o l s
Models that are boxed include plate and hardware • Models that are retail packaged are individually packaged in a clamshell.
Includes standard and Decora wall plates, plaster ring, and hardware
sonaNCE standard volume controls
VC60S 60-WATT VOLUME CONTROL – slider (BOXED)
This 12-step, high-quality autoformer volume control features a Decora-style slide switch and
silent slide action. It allows the attenuation or balancing of amplifier volume to one pair of
speakers. The top position is a straight through, parallel connection to the amplifier; the bottom
position is OFF. The “make before break” switch action results in smooth transitions between
steps. Fits single-gang backless retrofit boxes and standard plaster rings. Boating and RV
compatible. Decora style. Available in white. Individually boxed.
SPECIFICATIONS
PART# (WHITE).... 91521
QUANTITY.......... EACH
Power Rating: 60 watts RMS maximum input/channel
Total Attenuation: -42dB
Attenuation Steps: Top 6 steps are -3dB per step, lowest 4 steps are -6dB per
step; last step is OFF
Speaker Impedance: 8 ohms
Frequency Response: 20Hz – 20kHz ±1dB
Connections:Labeled quick-disconnect screw-to-connect terminals on
circuit board, 20-14 AWG capacity
Dimensions (W x H x D): 15∕ 8" x 4" x 3" (41mm x 102mm x 76mm)
Shipping Weight: 2 lbs (0.9kg)
VC60R 60-WATT VOLUME CONTROL – rotary (BOXED)
Rotary version of VC60S. Decora style. Available in white. Individually boxed.
PART# (WHITE).... 91505
QUANTITY.......... EACH
SPECIFICATIONS (Identical to VC60S)
VC30R 30-WATT VOLUME CONTROL – rotary (BOXED)
This high-quality autoformer volume control with 10-position light-touch switch allows the
attenuation or balancing of amplifier volume to one pair of speakers. The full-clockwise position
is a straight-through connection to the amplifier; the full counter-clockwise position is OFF.
The “make before break” switch action results in smooth transitions between steps. Fits all
single-gang backless retrofit boxes and standard plaster rings. UL/CE Listed. Boating and RV
compatible. Decora style. Available in white. Individually boxed.
specifications
PART# (WHITE).... 91497
QUANTITY.......... EACH
144
Power Rating: 30 watts RMS maximum input/channel
Total Attenuation: -30dB
Attenuation Steps: Top 7 steps are -3dB per step; lowest 2 steps are
-6dB per step; last step is OFF
Speaker Impedance:
8 ohms
Frequency Response: 20Hz – 20kHz ±2dB
Connections: Quick-disconnect screw terminal, 20-14 AWG wire capacity
Dimensions (W x H x D): 13∕ 4" x 4" x 23∕4" (44mm x 102mm x 76mm)
Weight: 1 lbs (0.45kg)
sonance standard volume controls
SONANCE
SERIES
®
ODVC60 60-WATT OUTDOOR VOLUME CONTROL
Completely weatherproof 60-watt volume control encased in a plastic enclosure.
SPECIFICATIONS
Power Rating: Switch Type: Frequency Response: Speaker Impedance: Dimensions (W x H x D):
60 watts/channel
10-position light-touch switch
20Hz – 20kHz ±2dB
8 ohms
1¾" x 4" x 2¼" (44mm x 102mm x 76mm)
PART#.................... 91903
QUANTITY............. EACH
Wall Plates
Available in white. Shipped 6 per package.
PART# (WHITE)..... 92164*
QUANTITY.......... 6-PACK
* While supplies last
v o l um e c o n t r o l s / W a l l P l at e s
DECORA TRIM PLATES
145
S o n a n c e Au d i o / V i d e o Au t o m at i o n
PROVIDING INVISIBLE SOLUTIONS FOR YOUR A/V SWITCHING NEEDS The AL2 and AS2 allow automatic switching from a
main source to a remote source, such as between whole-home audio system and a local TV. The AL2 operates at line level, while
the AS2 operates at speaker level. They default to Source A while monitoring Source B. When Source B is ON the device switches
to Source B until a signal is no longer present. It then switches back to Source A.
A/V Automatic Switchers
SPECIAL FEATURES Switching time from Source B back to
Source A is adjustable, from approximately three seconds
up to three minutes • Sensitivity adjustment compensates
for different source input signal levels • Control output links
AL2/S and AS2/S slave switchers to AL2 and AS2 • LEDs
indicate active source • Recessed mounting holes • Compatible
with 3" SnapTrack® mounts
AL2 Automatic line-level Source Selector
The AL2 performs automatic line-level switching. A 12V power supply is included, and DC in/out
connections allow multiple Audio/Video Automation components to share a single power supply.
Specifications:
PART#................. 90484
QUANTITY.......... EACH
Input and Output Signal: Input/Output Connections:
Relay Type:
Unbalanced line level audio or composite video
Gold-plated RCA jacks
High-quality, silver cadmium oxide
AS2 Automatic speaker-level Source Selector
The AS2 has the same features as the AL2, but it performs speaker-level switching.
Specifications:
PART#................. 90483
QUANTITY.......... EACH
Power Rating:
Input/Output Connections:
Relay Type:
100 watts RMS per channel
Removable quick-toggle speaker connectors
High-quality, silver cadmium oxide
AL2/S Automatic line-level Source Selector —
slave
PART#................. 90486
QUANTITY.......... EACH
The AL2/S is a “slave” unit that is controlled by an AL2 or AS2. It performs the same switching
functions as the AL2 without requiring a power supply. It receives DC voltage and a switching
trigger from the “master” AL2 or AS2 unit. The AL2/S can also be used to switch composite video
signal sources when used in conjunction with an AL2 or AS2 that is used for audio.
Specifications:
Input and Output Signal: Input/Output Connections:
Relay Type:
Unbalanced line level audio or composite video
Gold-plated RCA jacks
High-quality, silver cadmium oxide
AS2/S Automatic speaker-level Source Selector — slave
The AS2/S is a “slave” unit that is controlled by an AL2 or AS2. It performs the same switching
functions as the AS2 without requiring a power supply. It receives DC voltage and a switching
trigger from the “master” AL2 or AS2 unit.
Specifications:
PART#................. 90485
QUANTITY.......... EACH
146
Power Rating:
Input/Output Connections:
Relay Type:
100 watts RMS per channel
Removable quick-toggle speaker connectors
High-quality, silver cadmium oxide
S o n a n c e B a l a n c e d Au d i o S e n d e r / R e c e iv e r
The Sonance LS2 and LR2 form a system designed to send low-level audio signals long distances and in close proximity
to sources of noise interference without inducing noise or high frequency roll-off in the audio signal. The active LS2
circuitry converts the unbalanced signal to a balanced configuration and sends the balanced signal to the LR2, which
converts it back into an unbalanced signal. This virtually eliminates any noise picked-up over the length of the wire,
leaving only the original signal. The LS2 and LR2 are always used in conjunction with each other, except when used in
conjunction with equipment with balanced inputs or outputs (such as professional sound or recording equipment). In this
type of system the LS2 serves as an unbalanced-to-balanced converter and the LR2 serves as a balanced-to-unbalanced
converter.
sonance Balanced audio sender/receiver
LS2 BALANCED AUDIO SENDER*
One LS2 sender can be used with multiple receivers (LR2 or LR1 SAT modules) if the installation
requires multiple balanced drops to amplifiers or receivers in multiple locations. The LS2 includes
a modular, low-voltage power supply. Recessed mounting holes allow wall mounting, and the
chassis is compatible with 3" SnapTrack mounts.
(0dB ref = 0.775V)
THD + Noise:
Signal-to-Noise Ratio:
Frequency Response:
Input Impedance:
Power Consumption:
<01%, 20Hz – 20kHz
>-100dB (IHF-A wtd.)
20Hz – 20kHz ±0.2dB
47k ohms (unbalanced inputs)
55mA ±5% @ 12VDC
PART#................. 90491
QUANTITY.......... EACH
*While supplies last
LR2 BALANCED AUDIO RECEIVER*
Multiple LR2 receivers can be used with a single LS2 sender if the installation requires multiple
balanced drops to amplifiers or receivers in multiple locations. The LR2 includes a modular,
low voltage power supply. Recessed mounting holes allow wall mounting, and the chassis is
compatible with 3" SnapTrack mounts.
Specifications:
(0dB ref = 0.775V)
THD + Noise:
Signal-to-Noise Ratio:
CMRR:
Frequency Response:
Output Impedance:
Power Consumption:
<01%, 20Hz – 20kHz
>-100dB (IHF-A wtd.)
>98dB (20Hz – 5kHz); >75dB (5kHz – 20kHz)
20Hz – 20kHz ±0.2dB
60 ohms (unbalanced outputs)
30mA ±5% @ 12VDC
PART#................. 90490
QUANTITY.......... EACH
SONANCE A U D I O / V I DEO A U TO M AT I ON
Specifications:
*While supplies last
sonance audio/video automation
OP3 SPEAKER-LEVEL TO LINE-LEVEL 30dB OUTPUT PAD
The OP3 attenuates a stereo speaker-level signal to a stereo line-level signal. It can be used to
create an additional preamp-level signal from an amplifier or receiver speaker output, and it
can also be used to add line-level output capability to a TV with only external speaker leads. It
can be used in conjunction with a 2-female to 1-male Y-cord to sum left and right channels for
monaural applications. Boating and RV compatible.
SPECIFICATIONS
Dimensions (W x H x D): 19∕ 16" x 13∕ 16" x 13∕ 16" (40mm x 30mm x 30mm)
Shipping Weight: 1 lbs (0.45kg)
Note: Not compatible with bridged amplifiers or floating-ground amplifiers.
PART#................. 900346
QUANTITY.......... 10/BAG
147
S o n a n c e Op t iLi n Q I R
Sonance OptiLinQ® IR products offer a variety of convenient and reliable ways to add IR control to almost any system.
sonance optilinq ir receivers
CR1 Cabinet-Mounted Infrared Receiver
This tabletop-mounted IR receiver includes a CR1 hub connecting block (easily mountable in a
SnapTrack). A red talk-back LED tests system for correct wiring as well as indicating IR reception.
The included 7-foot cable and 3.5mm stereo mini plug permit direct plug-in to OptiLinQ
connecting blocks that have an IR RCVR or AUX jack. Boating and RV compatible.
SPECIFICATIONS
PART#................. 91343
QUANTITY.......... EACH
Nominal Reception Angle: Up to 45° off-axis
3.5mm stereo mini-plug
IR Connections: Long Cable Requirements: 3/24 to 200', 3/22 to 600', 3/20 to 2000',
3/18 to 5000' (unshielded OK)
100 milliamps
Maximum Current Output: Maximum # of IR Emitters: 4 connected in series (use OptiLinQ connecting
blocks for emitter expansion)
Power Handling: 12V DC @ 10 milliamps, PS1 power supply required
Receiver Dimensions (W x H x D): 33∕ 4" x 11∕ 8" x 31∕ 8" (95mm x 29mm x 79mm)
Hub Dimensions (W x H x D):
23∕ 8" x 3∕4" x 3" (60mm x 19mm x 76mm)
7 feet (2.1m) to junction
Wire Length: Shipping Weight: 10.4 oz (0.295kg)
MR1 Micro Infrared Receiver
This small IR receiver is extremely sensitive to IR commands. An included 3-terminal block
enables easy extension of the included 7-foot ribbon cable, allowing infrared to be received from
up to 25 feet away. The red talk-back LED tests the system for correct wiring as well as indicating
IR reception. Boating and RV compatible.
specifications
PART#................. 91344
QUANTITY.......... EACH
Nominal Reception Angle: Up to 55° off axis
IR Carrier Frequency Bandwidth: 30kHz –100kHz
Maximum Transmission Length: 1 mile (using 18-gauge wire)
Long Cable Requirements: 3/24 to 200', 3/22 to 600', 3/20 to 2000', 3/18 to
5000' (unshielded OK)
<30 feet
Reception Range: Maximum Current Output: 100 milliamps
Maximum # of IR Emitters: 4 connected in series (use OptiLinQ connecting
blocks for emitter expansion)
Mode: Normal 3-wire mode
Power Handling: 12V DC @ 10 milliamps, PS1 power supply required
Dimensions (W x H x D): 27∕ 16" x 7∕ 16" x 5∕ 16" (62mm x 11mm x 8mm)
Wire Length: 7 feet (2.1m) to junction
Shipping Weight: 2.5 oz (0.071kg)
SMR1 Surface-Mount IR Receiver
The SMR1 is extremely sensitive to IR commands. The included 3-terminal block enables easy
extension of the included 7-foot ribbon cable, allowing infrared to be received from up to 25 feet
away. A red talk-back LED tests the system for correct wiring as well as indicating IR reception.
Boating and RV compatible.
PART#................. 91345
QUANTITY.......... EACH
148
specifications (Identical to MR1 except):
Dimensions (Dia x D): Shipping Weight: 1
∕ 2" x 23∕ 8" (13mm x 60mm)
2 oz. (0.057kg)
Sonance optilinq ir receivers
SMR1P Surface-mount IR Receiver
The SMR1P is a quick-connect version of SMR1. The 7-foot cable terminates in a 3.5mm stereo
mini-plug that plugs directly into OptiLinQ connecting blocks.
Specifications
Nominal Reception Angle: Up to 55° off axis
IR Carrier Frequency Bandwidth: 30kHz –100kHz
Maximum Transmission Length: 1 mile (using 18-gauge wire)
Long Cable Requirements: 3/24 to 200', 3/22 to 600', 3/20 to 2000', 3/18 to
5000' (unshielded OK)
Reception Range: <30 feet
100 milliamps
Maximum Current Output: Mode: Normal 3-wire mode
Power Handling: 12V DC @ 10 milliamps, PS1 power supply required
1
∕ 2" x 23∕ 8" (13mm x 60mm)
Dimensions (Dia x D): Wire Length: 7 feet (2.1m) to junction
Shipping Weight: 2 oz. (0.057kg)
PART#................. 91346
QUANTITY.......... EACH
The FSMR1 is specifically designed for use with plasma televisions and other sources of IR or
fluorescent interference. Features system talk-back LED. Up to 12 units may be powered by one
PS1 power supply. Also features a 7-foot, 3-conductor ribbon cable with stripped and tinned
ends. Use with these OptiLinQ emitters: E1, E2, VE1, VE2.
specifications
Input IR Carrier Frequency
Bandwidth: Centered at 38kHz
Operational Frequency Range:
30kHz – 110kHz
Reception Range: 15 – 25 feet
Output IR Carrier Frequency: Approximately 38.510kHz
Cable Requirements: 3-conductor, 24 to 18 gauge (unshielded OK)
Maximum Transmission Length: 1,000 ft using 18 gauge wire
Maximum Current Output: 100 mA
Power Requirements: 12V DC @ 110 mA
7
∕ 16" x 5∕ 16" x 21∕ 8" (11.2mm x 8.5mm x 55mm)
Dimensions (W x H x D): PART#(SILVER).....92341*
PART# (BLACK)... 92222
QUANTITY.......... EACH
*While supplies last
S o n a n c e o p t i l i n q ir r e c e iv e r s
fsmr1 full-spectrum IR Receiver
WMR1 Wall-Mount IR Receiver*
The WMR1 fits standard-gang retro or new-construction rings, allowing in-wall mounting of the
IR receiver. The IR window bezel allows for Decora-style installation. A red talk-back LED allows
system testing. Boating and RV compatible.
SPECIFICATIONS
Nominal Reception Angle: IR Carrier Frequency Bandwidth:
Long Cable Requirements: Reception Range: Maximum Current Output: Power Handling: Dimensions (W x H x D): Shipping Weight: up to 45° off-axis
30kHz –100kHz
3/24 to 3/28 (unshielded OK)
Up to 25 feet
100 milliamps
12V DC @ 10 milliamps
111∕ 16" x 4 1∕ 16" x 1" (43mm x 104mm x 25mm)
3.8 oz (0.11kg)
PART#................. 91347
QUANTITY.......... EACH
*While supplies last
149
sonance optilinq ir receivers
E1 Mini Emitter
The E1 can be easily placed on electronic equipment. It connects to OptiLinQ connecting blocks
and C4630 SE IR ports. Includes three replacement double-sided adhesive squares and an
alcohol swab. Boating and RV compatible.
SPECIFICATIONS
PART#................. 91348
QUANTITY.......... EACH
Lead Termination: Wire Length: Shell Housing: Shipping Weight: 3.5mm mini plug
7' (2.1m) to junction, 3' (1m) to emitter
IR Opaque shell
1.2 oz (0.034 kg)
E2 Dual Mini Emitters
The E2 includes two mini emitters that are wired in series and can be easily placed on electronic
equipment. The E2 connects to OptiLinQ connecting blocks and C4630 SE IR ports. It includes
four replacement double-sided adhesive squares and an alcohol swab. Boating and RV
compatible.
PART#................. 91350
QUANTITY.......... EACH
SPECIFICATIONS (Identical to E1 except):
Wire Length: 7' (2.1m) to junction, 3' (1m) to each emitter
VE1 Visible IR Emitter
This IR emitter provides a visible output indicator with a low-output level. It is suitable for
controlling a single component and can be easily placed on electronic equipment. It connects to
OptiLinQ connecting blocks and C4630 SE IR ports. It includes two replacement double-sided
adhesive squares and an alcohol swab. Boating and RV compatible.
PART#................. 91349
QUANTITY.......... EACH
SPECIFICATIONS (Identical to E1 except):
Shell Housing: Alternate black IR opaque shell
VE2 Dual Visible IR Emitters
The VE2 includes two visible mini emitters that are wired in series and provide a visible output
indicator with a low output level. The can be easily placed on electronic equipment. It connects
to OptiLinQ connecting blocks and C4630 SE IR ports. It includes four replacement double-sided
adhesive squares and an alcohol swab. Boating and RV compatible.
SPECIFICATIONS (Identical to E1 except):
PART#................. 91351
QUANTITY.......... EACH
Shell Housing: Alternate black IR opaque shell
Wire Length: 7' (2.1m) to junction, 3' (1m) to each emitter
Mini Emitter Shield Cover
IR emitter cover shield designed to block out ambient stray IR signals. Fits over VE-1 or EM-1 IR
emitters. Attaches to component or rack surface by adhesive backing.
PART#................. 92884
QUANTITY.......... EACH
150
SPECIFICATIONS
Dimensions (W x H x D):
2.0" x 0.832" x 0.3" D (50.8mm x 21.13mm x 7.62mm)
optilinQ IR connector blocks
CB1 One-Zone Connecting Block
This single-zone connecting block mounts in SnapTrack and provides jacks for an IR receiver, four
IR emitters, and a power supply. Boating and RV compatible. Note: When used as an emitter
expander, it does not require a power supply.
Specifications
Inputs: 1 x screw type 4-terminal plug,
1 x IR Receiver (3.5mm stereo mini jack)
Outputs: 4 parallel-driven emitter ports
(3.5mm mono mini jacks)
Series Resistors: 470-ohm resistor in series with each emitter
Power Requirements: 12V DC, uses PS1or PS2 power supply
2.1mm
Power Jack: Dimensions (W x H x D): 23∕ 8" x 3∕4" x 3" (60mm x 19mm x 76mm)
Shipping Weight: 4.5 oz (0.127kg)
PART#................. 91353
QUANTITY.......... EACH
ACB1 One-Zone Amplified Connecting Block*
Designed for installations requiring multiple IR emitters, the ACB1 provides strong IR signals for
up to 10 emitters. Mounts in a SnapTrack. A side-mounted LED provides status and IR feedback
information. Boating and RV compatible.
Inputs: 1 x screw-type 4-terminal plug;
1 x IR receiver (3.5mm stereo mini jack)
Outputs:10 x parallel-driven emitter ports (3.5mm mini jacks);
1 high-level IR signal output port (3.5mm mini jack)
12V DC, uses PS1 or PS2 Power Supply
Power Requirements: 2.1mm
Power Jack: Series Resistors: 100 ohms or 470 ohms on each emitter output (selectable
with included jumpers), for high- and low-power operation
Dimensions (W x H x D): 5 7∕ 16" x 7∕ 8" x 3" (138mm x 22mm x 76mm)
Shipping Weight: 10.2 oz (0.29kg)
PART#................. 91354
QUANTITY.......... EACH
optilinq IR
Specifications
*While supplies last
CB2Z Two-Zone Connecting Block*
The CB2Z is a budget two-zone system that routes IR from each zone to a dedicated receiver
or preamp. It is compatible with both the CB1 and ACB1 connecting blocks for common emitter
expansion for source equipment. Mounts in a SnapTrack. Boating and RV compatible.
Specifications
Inputs: 2 x 4-screw removable connectors to interface with all 3 lead
IR receivers
Outputs: 2 x zone emitter ports (3.5mm mini jacks);
1 common emitter port (3.5mm mini jack)
12V DC, uses PS1 or PS2 Power Supply
Power Requirements: Power Jack: 2.1mm
Dimensions (W x H x D): 23∕ 8" x 3∕4" x 3" (60mm x 19mm x 76mm)
Shipping Weight: 4.5 oz (0.128kg)
PART#................. 91355
QUANTITY.......... EACH
*While supplies last
151
optilinQ power supplies and IR packages
PS1 Basic Power Supply
SPECIFICATIONS
Power: Supplies 12VDC (12V regulated, 0.2A)
2.1mm
Plug: Dimensions (W x H x D): 13∕ 4" x 11∕ 2" x 23∕4" (44mm x 38mm x 70mm)
6' (1.8m)
Wire Length: Shipping Weight: 1 lb (.45kg)
PART#........................91352
quantity.................each
PS2 High-Current Power Supply
SPECIFICATIONS
Power: Supplies 12VDC (12V regulated, 1A)
Plug: 2.1 mm
Wire Length: 6' (1.8m) from wall to power supply;
6' (1.8m) from supply to DC connector
Dimensions (W x H x D): 31∕ 8" x 21∕ 2" x 6" (79mm x 64mm x 152mm)
Shipping Weight: 2 lbs (0.9kg)
PART#........................91356
quantity.................each
optilinq ir packages
quantity (all).........each
msrp (all).................open
PKG 1 PART#.............92439
PKG 2 PART#.............92440
PKG 3 PART#.............92441
PKG 4 PART#.............92469
OptilinQ IR Packages
IR Package 1 Includes: 1 ea. CR1, 4 ea. E1, 1 ea. CB1 , 1 ea. PS1
IR Package 2 Includes: 1 ea. MR1, 4 ea. E1, 1 ea. CB1, 1 ea. PS1
IR Package 3 Includes: 1 ea. FSMR1, 4 ea. E1, 1 ea. CB1, 1 ea. PS1
IR Package 4 Includes: 3 ea. FSMR1, 3 ea. VE2, 1 ea. E1, 1 ea. CB1,
1 ea. CB2, 2 ea. PS1
optilinq international Ir packages
IR Package 2 Includes: 4 ea. E1, 1 ea. MR1, 2 ea. CB1
international ir packages
quantity (all).........each
PKG 2 PART#.............92831
PKG 3 PART #............92832
PKG 5 PART #............92833
152
IR Package 3 Includes: 4 ea. E1, 1 ea. FSMR1, 1 ea. CB1
IR Package 5 Includes: 4 ea. VE1, 1 ea. MR1, 1 ea. CB1
o p t i l i n q ir
153
iPort
With the invention of iPort, Sonance pioneered the integration of the iPod into residential A/V systems.
By recognizing early-on the need for integrating audio and video content from an iPod, iPort has become
recognized as the standard for controlling and playing iPod content. iPort is the only iPod solution that works
seamlessly with a large number of popular home automation and AV control systems, providing integrators
the ultimate flexbility when including iPod solutions in their projects.
154
i P o r t C o n t r oSERIES
l Mount
SONANCE
®
S e ri e s
iPort®, the inventor of the in-wall music system for the Apple iPod® and iPad®, continues to innovate solutions for the
custom installer with Apple products.
The iPort CM-IW2000P allows an Apple iPad to be used as an in-wall touch panel providing continuous charging
of the iPad and allowing a connection to a locally available wi-fi network. Supporting a variety of downloadable
applications for home automation control and common applications such as weather, stocks and news; the CM2000
provides the user with control of audio, video, lighting and climate on the mounted iPad when the control application
is connected to a compatible control system. The CM2000 securely mounts the iPad into the wall with an attractive
and discreet frame, which is magnetically secured to the in-wall mounting assembly. Installed in a portrait or
landscape orientation, the CM2000 presents the iPad in a convenient and stylish manner.
iPORT control mount series
iPort CM-IW2000P Control Mount for iPad
Features
•Allows wi-fi connection of the mounted iPad for downloads of apps, audio content and certain
upgrades
•Connects to compatible control systems via wi-fi for operating home automation systems
•Securely supports the iPad and provides a modern, elegant appearance
•Charges the iPad while it is mounted
Specifications
Dimensions (W x H x D): Cut-out Dimensions (W x H): System Components: 11.6" x 9.51" x 2.36" (294.6mm x 241.6mm x 59.9mm)
10.75" x 8.65" (273.1mm x 219.7mm)
Mounting cradle assembly with magnetic faceplate, connector and
charging board with RJ-45 jack, power wall plate, power supply
PART#................. 70091
QUANTITY.......... EACH
iPORT
The iPort CM-IW100T Control mount for iPod Touch allows an iPod touch® to be used for home
automation control and music playback. Supporting a variety of downloadable applications for control of audio,
video, lighting and climate as well as traditional touch screen applications such as weather and time. The CM100
can be installed vertically or horizontally, depending upon the desired use.
An iPod touch is securely mounted into the CM100 and trimmed with a magnetic faceplate to provide in-wall access
to the iPod touch's multi-touch display. Streaming music from a variety of internet sources may be played via the
mounted iPod touch, turning the CM100 into a discreet in-room music source which can be easily connected to a
small amplifier and speakers for a local room music system. With the audio output routed to a multi-zone audio
controller, music from the CM100 can be distributed. Using a Wi-Fi connection through the mounted iPod touch,
applications supported by iPod touch can be downloaded for integration with the control system that has been
provided by the installer.
iPort CM-IW100T Control Mount for iPod Touch
Features
•Secure mounting for iPod touch in either vertical or horizontal orientation
•Charging
•Audio output
•Faceplate with on/off and home button for iPod touch
•Includes magnetic faceplate, mounting cradle assembly, connector and charging board with
RJ-45 jack, audio wall plate, and power supply
Specifications
Power Supply: Dimensions (W x H x D): Cut-out Dimensions (W x H): 12 ~ 15V DC, regulated
4.21" x 5.76" x 2.375" (106.9mm x 146.3mm x 60.3mm)
3.56" x 5.12" (90mm x 133mm)
PART#................. 70090
QUANTITY.......... EACH
155
i P o r t I n -W a l l D o c k i n g Sy s t e m s
Play an iPoD music collection throughout the home! The iPort In-Wall Docking System
allows an iPod or iPod touch to become part of a whole-home audio-video system and/or to be used as a
source in a variety of local room systems. The iPort IW-2 series uses RJ-45 connections for audio, video,
and power over Cat5. It installs easily using Roto-lock toggles with a small footprint and appearance
similar to most light switches. Three different systems have different capabilities and components to
accommodate a wide range of installation and system requirements.
iPort in-wall docking systems
SPECIAL FEATURES Polished ABS construction complements
iPod and iPod touch styling • Designed for easy docking/
undocking of iPod • Connects to wall plates with Cat5
cable via RJ-45 connectors • Allows IR control (IW-21
and IW-22) and RS-232 control (IW-22) of iPod • IW-20
and IW-21 provide unbalanced audio output for local
system installations • IW-22 provides balanced audio
output for long-distance system installations • Built-in
preamplifier allows variable volume control (IW-21 and
IW-22) • Available upgrade kits for balanced video output
(IW-21 and IW-22), balanced audio output, and RS-232 control
(IW-21) • Regulated DC power supply connects to wall plate
and charges iPod or iPod touch while docked • As easy to install
as Sonance in-wall speakers via Roto-Lock mounting clamps
• Paintable flange • For current compatibility information, visit
www.iportmusic.com
iPort iw-22 in-wall docking system with rs-232 control
IW-22 system capabilities
PART#................. 70129
QUANTITY.......... EACH
•Delivers long-distance balanced audio up to 500 feet (152m) from the iPort.
•Built-in preamplifier allows variable volume control via IR and RS-232.
•Delivers unbalanced video (iPod video content only, not program metadata) up to 30 feet (9m).
•Optional balanced video kit (70131) provides component video up to 250 feet (76m).
•IR connection allows remote control of most iPod/iPod touch audio functions when in general
control mode.
•Integrated RS-232 control enables two-way communication (including iPod program metadata)
and control of the iPod/iPod touch via compatible control systems.
•Charges the iPod/iPod touch while it is docked.
•Compatible with most dockable iPod models, including iPod nano 5th generation, iPod
classic, and iPod touch. For current compatibility information, visit www.iportmusic.com.
Dimensions (W x H x D): 43∕ 4" x 613∕32" x 31∕2" (121mm x 163mm x 89mm)
Cut-Out Dims. (W x H):
4" x 59∕16" (102mm x 141mm)
IW-22 System components*
(1) iPort dock (faceplate and utility box)
(1) Balanced audio wall plate
(1) Balanced audio sender plug-in circuit card
(1) RS-232 control plug-in circuit card and RS-232 cable
(1) Unbalanced video wall plate and cable
(1) Regulated power supply with USA plug
*See "iPORT IW UPGRADE KITS" on page 156 for iPort IW upgrade kits.
iPort iw-21 in-wall docking system with ir control
IW-21 system capabilities
•Delivers local-zone unbalanced audio up to 30 feet (9m) from the iPort.
•Built-in preamplifier allows variable volume control via IR or the iPod's volume control.
•Delivers unbalanced video (iPod video content only, not program metadata) up to 30 feet from iPort.
•IR allows remote control of most iPod/iPod touch audio functions when in general control mode.
•Charges the iPod/iPod touch while it is docked.
•Compatible with most dockable iPod models, including iPod nano 5th generation, iPod classic,
and iPod touch. For current compatibility information, visit www.iportmusic.com.
•Optional balanced audio kit (70130) delivers audio up to 500 feet (152m) from the iPort.
•Optional balanced video kit (70131) delivers video up to 250 feet (76m) from the iPort.
Dimensions (W x H x D): 43∕ 4" x 613∕32" x 31∕2" (121mm x 163mm x 89mm)
Cut-Out Dims. (W x H):
4" x 59∕16" (102mm x 141mm)
PART#................. 70128
QUANTITY.......... EACH
IW-21 System components*
(1)
(1)
(1)
(1)
iPort dock (faceplate and utility box)
Audio wall plate
Unbalanced video wall plate and cable
Regulated power supply with USA plug
*See "iPORT IW UPGRADE KITS" on page 156 for iPort IW upgrade kits.
156
iPORT In-Wall docking systems
iPort iw-20 in-wall docking system
IW-20 System Capabilities
•Delivers local-zone unbalanced audio up to 30 feet (9m) from the iPort. Note: The audio
system must supply volume control.
•Charges the iPod/iPod touch while it is docked.
•Compatible with most dockable iPod models, including iPod nano 5th generation, iPod classic,
and iPod touch. For current compatibility information, visit www.iportmusic.com.
Dimensions (W x H x D): 43∕ 4" x 613∕32" x 31∕2" (121mm x 163mm x 89mm)
Cut-Out Dims. (W x H):
4" x 59∕16" (102mm x 141mm)
IW-20 System components
PART#................. 70127
QUANTITY.......... EACH
(1) iPort dock (faceplate and utility box)
(1) Audio wall plate
(1) Regulated power supply with USA plug
i P o r t Fr e e - S ta n d i n g D o c k i n g Sy s t e m s
Play an iPod music and video collection throughout the home! Like the iPort IW, the iPort FS-2 series
enables the iPod or iPod touch to be used as a source in a local audio-video system. The iPort can be placed on a desk,
table, or other convenient location. There are three different iPort FS-2 series systems with different capabilities and
components to accommodate a range of installations and system requirements.
iPORT Free-Standing docking systems
video upgrade kits allow long-distance system operation
• Regulated DC power supply powers iPort and
keeps iPod and iPod touch charged while docked
• Connects to computer via USB 2.0 cable (not
included) • For current compatibility information, visit
www.iportmusic.com.
iPort
Special Features • Designed for easy docking/
undocking of iPod/iPod touch • User-initiated iTunes
connection via jewel button on iPort • Selectable fixed
or variable output • IR control (FS-21 and FS-22)
and RS-232 control (FS-22) of the iPod/iPod touch •
Unbalanced audio and video output for local system
installations • Available optional balanced audio and
iPort FS-23 free-standing docking system
The iPort FS-23 free-standing digital media system for the iPod®/iPod touch® provides the
freedom to control your iPod/iPod touch from an on-screen video interface on any connected
TV. Using the included iPort remote control, an easy-to-navigate menu system may be selected
for music, videos, playlists, songs, artists, albums, and more. iPod settings for equalizer, repeat,
shuffle, and other controls may also be controlled on-screen.
FS-23 System Capabilities
•View and navigate content from the iPod/iPod touch directly on your TV.
•Charge the iPod/iPod touch while docked.
•Select music, video, song, artist, album, and playlist.
•View an elegant Now Playing screen that indicates title, artist, and album with cover art
provided by the iPod/iPod touch.
•Control iPod/iPod touch settings such as equalizer, repeat, and shuffle.
•Built-in pre-amplifier for variable volume control.
•Stop-motion screen saver with time adjustment.
•Integrated IR allows control of your iPod/iPod touch via included IR remote or IR input port.
•Compatible with most dockable iPod models, including iPod nano 5th generation, iPod
classic, and iPod touch. For current compatibility information, visit www.iportmusic.com.
•Optional balanced audio kit (70122) delivers audio up to 500 feet (152m) from the iPort.
•Optional balanced video kit (70123) delivers video up to 250 feet (76m) from the iPort.
Part#................. 70117
Quantity.......... each
FS-23 System components*
(1)
(1)
(1)
(1)
(1)
iPort dock
iPort standard IR remote
Audio cable (3.5mm stereo to 2-RCA, 2 meters)
Component video cable (3.5mm 4-pin to 3-RCA, 2 meters)
Global switching power supply with international adapters
*See "iPORT FS-2 SERIES UPGRADE KITS" on page 157 for iPort FS upgrade kits.
157
iPORT free-standing docking systems
iPort FS-22 free-standing docking system with rs-232
control
FS-22 System Capabilities
Part#................. 70116
Quantity.......... each
•Delivers unbalanced audio up to 30 feet (9m) from the iPort.
•Optional balanced audio kit (70122) provides audio up to 500 feet from the iPort.
•Delivers unbalanced component video, composite video, or S-Video up to 30 feet (9m) from
the iPort. (Note: Video content only, not program metadata. Video output format is determined
by the iPod.)
•Optional balanced video kit (70123) provides component video up to 250 feet (76m) from the
iPort
•Integrated RS-232 control enables two-way communication (including iPod program
metadata) and control of the iPod/iPod touch via compatible control systems.
•Allows iPort firmware upgrades (requires optional cable).
•Allows the iPod to be controlled via line-of-sight IR from the front of the iPort and (with
optional cable and IR receiver) from a second location via a rear panel connection.
•Allows the iPod’s volume control to control the iPort system volume (General mode only).
•Connects to a computer, allowing the iPod to be updated via iTunes while it is docked
(requires USB 2.0 cable, not included).
•Charges the iPod/iPod touch (via the regulated power supply) while it is docked.
•Compatible with most dockable iPod models, including iPod nano 5th generation, iPod classic, and
iPod touch. For current compatibility information, visit www.iportmusic.com.
FS-22 System components*
(1)
(1)
(1)
(1)
(1)
iPort dock
Audio cable (3.5mm stereo to 2-RCA, 2 meters)
Component video cable (3.5mm 4-pin to 3-RCA, 2 meters)
RS-232 extended control cable (RJ11 to female DB9, 2 meters)
Global switching power supply with international adapters
*See "iPORT FS-2 SERIES UPGRADE KITS" on page 158 for iPort FS upgrade kits.
iPort FS-21 free-standing docking system with IR
control
FS-21 System Capabilities
Part#................. 70115
Quantity.......... each
•Delivers unbalanced audio up to 30 feet (9m) from the iPort.
•Delivers unbalanced component video, composite video, or S-Video up to 30 feet (9m)
from the iPort. (Note: Video content only, not program metadata. Video output format is
determined by the iPod.)
•Allows the iPod to be controlled via line-of-sight IR from the front of the iPort and (with
optional cable and IR receiver) from a second location via a rear panel connection.
•Allows the iPod’s volume control to control the iPort system volume.
•Connects to a computer, allowing the iPod to be updated via iTunes while it is docked
(requires USB 2.0 cable, not included).
•Charges the iPod/iPod touch while it is docked.
•Compatible with most dockable iPod models, including iPod nano 5th generation, iPod classic,
and iPod touch. For current compatibility information, visit www.iportmusic.com.
•Optional balanced audio kit (70122) delivers audio up to 500 feet (152m) from the iPort.
•Optional balanced video kit (70123) delivers video up to 250 feet (76m) from the iPort.
FS-21 System components*
(1) iPort dock
(1) Audio cable (3.5mm stereo to 2-RCA, 2 meters)
(1) Component video cable (3.5mm 4-pin to 3-RCA, 2 meters)
(1) Global switching power supply with international adapters
*See "iPORT FS-2 SERIES UPGRADE KITS" on page 158 for iPort FS upgrade kits.
158
iPORT IW UPGRADE KITS
iPort IW-2 series balanced audio upgrade kit
This upgrade for the iPort IW-21 delivers balanced audio up to 500 feet from the iPort, enabling
long-distance system operation. Includes balanced audio sender card, balanced audio receiving
wall plate and Decora wall plate.
PART#................. 70130
QUANTITY.......... EACH
iPort IW-2 series balanced video upgrade kit
This upgrade for the iPort IW-21 and IW-22 delivers balanced video up to 250 feet (76m)
from the iPort, enabling long-distance system operation. Includes balanced video sender card,
balanced video receiving wall plate and Decora wall plate. Supports component video, via
selector switch inside the iPort IW-21 or IW-22.
PART#................. 70131
QUANTITY.......... EACH
iPort
iPort IW-2 Series RS-232 Control upgrade kit
Note: Requires Balanced Audio Upgrade Kit (part # 70130, see above).
PART#................. 70012
QUANTITY.......... EACH
U pgr a d e Ki t s
This upgrade for the iPort IW-21 allows long-distance RS-232 control of iPod functions with
2-way communication (requires compatible 3rd-party controller). It includes an RS-232 plug-in
circuit card (for insertion in the iPort) and an RS-232 extended control cable (RJ11 to female
DB9, 2 meters).
iPort IW main pcb upgrade kitS
These replacement main PCBs for the iPort IW-1 and for the iPort IW-2 through IW-5 support the
following upgrades:
iPort IW-1 systems
• Charges all compatible iPod/iPod touch models except for 3rd-generation iPods.
iPort IW-2 – IW-5 systems
•Charges all compatible iPod/iPod touch models except for 3rd-generation iPods.
•Selectable variable audio output. A built-in audio preamp allows the iPort to control
the iPod’s volume via IR or from the iPod when in the general control mode.
•Selectable component or composite/S-Video output.
•Selectable default iPod control mode (RS-232 enable or disable).
•Main PCB authentication unlocks the video output on the 2nd generation iPod touch.
•The ability to update iPort firmware via the optional firmware update cable
(part # 70132, see page 161).
*Note: Part #70124 can also be used to replace a damaged main PCB in iPort IW-20. Part
#70125 can also be used to replace a damaged main PCB in iPort IW-21 and IW-22 models.
For iPort IW-1
PART#................. 70124*
QUANTITY.......... EACH
for iPort IW-2 – IW-5
PART#................. 70125*
QUANTITY.......... EACH
159
iPORT FS-2 SERIES UPGRADE KITS
iPort FS-2 series balanced audio upgrade kit
PART#................. 70122
QUANTITY.......... EACH
This upgrade for the iPort FS-21, FS-22, and FS-23 delivers balanced audio up to 500 feet (152m)
from the iPort, for long-distance system requirements. It includes a balanced audio sender wall
plate, a balanced audio receiver wall plate, a regulated DC power supply, and two Decora wall
plates.
iPort FS-2 series balanced video upgrade kit
PART#................. 70123
QUANTITY.......... EACH
This upgrade for the iPort FS-21, FS-22, and FS-23 delivers balanced video up to 250 feet (76m)
from the iPort, for long-distance system requirements. It includes a balanced video sender wall
plate, a balanced video receiver wall plate, a regulated DC power supply, and two Decora wall
plates.
iPORT Accessories
iPort EX-1 Remote Control*
For use with iPort IW-21, IW-22, FS-21, and FS-22, as well as most legacy iPort IW and FS models.
Enables line-of-sight control of iPod/iPod touch. Controllable functions include:
PART# white...... 70032
PART# BLACK..... 70030
QUANTITY.......... EACH
•
•
•
•
•
•
•
•
Next/Previous Track
Volume Up/Down
Play/Pause
Shuffle mode selection
Repeat mode selection
iPort LED brightness selection
Remote controller function selections: song/album/playlist/chapter
iPod menu navigation control (up/down, select, menu (back)
*While supplies last
iPORT IW Rack-mount panel
PART#................. 70056
QUANTITY.......... EACH
Allows all iPort IW systems to be mounted in a standard 19” equipment rack.
4U rack height. Brushed, black aluminum finish.
iPORT FIRE-RATED (listed) BACKCAN
The Intertek Listed* fire-rated backcan is a component in the iPort In-wall Docking System (WHI
Design Listing SON/MP 60-01), comprised of an Intertek Listed fire-rated metal backcan (Model
70040), an unlisted ABS iPort Utility Box, and an unlisted iPort faceplate.
Can Dimensions (W x H x D):
Shipping Weight:
PART# ................ 70040
QUANTITY.......... EACH
160
171∕ 4" x 111∕ 2" x 31∕ 2" (438mm x 292mm x 89mm)
7 lbs (3.2kg) each
*See Intertek Directory of Listed Building Products at:
http://etlwhidirectory.etlsemko.com/WebClients/ITS/DLP/Products.nsf/$$Search?OpenForm
iport accessories
iPort Firmware Update cable
Connects iPort IW-21, IW-22, and FS-22 to a computer for updating firmware. iPort firmware
software updates are found at www.iportmusic.com.
PART#................. 70132
QUANTITY.......... EACH
iPort FS-2 Series composite/s-video cable
This 3.5mm to combination RCA/S-Video cable connects the iPort FS-21 and FS-22 video output
to a video distribution system or display.
PART#................. 70120
QUANTITY.......... EACH
iPort
iPort FS-2 series component video cable
PART#................. 70133
QUANTITY.......... EACH
a c c e s s o ri e s
This 3.5mm to 3-RCA cable connects the iPort FS-21, FS-22, and FS-23 video output to a video
distribution system or display. Replacement for the cable already included with the iPort FS-21,
FS-22, and FS-23.
iPort replacement control mode jumpers
Replacement for FS-22 control mode and balanced video wall plate adjustment jumpers. Sold
in packs of six.
PART# ................ 70089
QUANTITY.......... 6-PACK
iPort black faceplate
Black IW faceplate for black iPods or decor requirements.
(May require IW iPod touch Upgrade Kit (70112).
Compatible with IW-20, IW-21, IW-22, IW-1, IW-2, IW-3, IW-4, and IW-5.
PART# ................ 70020
QUANTITY.......... EACH
161
iport accessories
iPod touch upgrade kit for IW 1-5
PART# ................ 70112
QUANTITY.......... EACH
PART# ................ 70008
QUANTITY.......... EACH
The IW iPod touch Upgrade Kit is available for retrofitting an existing IW-1 through an IW-5
that was installed prior to the iPod touch being available. The faceplate is re-designed to
allow user access to the iPod touch home button. The matching utility box must also be
installed to support the interior dimension changes on the faceplate. The dealer removes
the existing internal PCB (2) from the installed IW and re-installs them in the new plastics.
There is no cut-out dimension change.
iPort iw stud-mount bracket
New constuction bracket reserves the space for any IW model.
Compatible with IW-20, IW-21, IW-22, IW-1, IW-2, IW-3, IW-4, and IW-5.
PART# ................ 70016
QUANTITY.......... 5-pack
iPort IW power supply
International power supply for the in-wall system. Includes US power cord.
PART# ................ 70015
QUANTITY.......... EACH
162
Compatible with IW-20, IW-21, IW-22, IW-1, IW-2, IW-3, IW-4, IW-5.
iPort
a c c e s s o ri e s
163
Index A: Alphabetical
PRODUCT NAME
PRODUCT NAME
275 SE (120V)
275 SE (230V)
275 SE RMF (120V)
275 SE RMF (230V)
275X3 SE
275X3 SE RMF
421R (Original series)
421R SST (Original series)
422 (Original series)
422R (Original series)
422S (Original series)
423 (Original series)
621 (Original series)
621R (Original series)
621R SST (Original series)
621R TL thinline (Original series)
622C cabinet speaker grille (Original series)
622 (Original series)
622R (Original series)
622R TL thinline (Original series)
623 LCR cabinet speaker (Original series)
623 LCR (Original series)
623 (Original series)
623R (Original series)
623R SST (Original series)
623R SUR (Original series)
623R SUR surround (Original series)
623R TL SST (Original series)
623R TL thinline (Original series)
623S (Original series)
623 SST (Original series)
624 (Original series)
624R (Original series)
625 (Original series)
625R (Original series)
831 (Original series)
831R (Original series)
831R SST (Original series)
832 (Original series)
832R (Original series)
875D MKII multi-channel amplifier (120V)
875D MKII multi-channel amplifier (230V)
1230 (120V)
1230 (230V)
1230 RMF (120V)
1230 RMF (230V)
1230 RMF faceplate
1250 MKII
1250 MKII RMF
1250 MKII RMF faceplate
2120T MKII (120V)
2120T MKII (230V)
2120T MKII RMF (120V)
2120T MKII RMF (230V)
A150 subwoofer amplifier (120V)
A150 subwoofer amplifier (230V)
A800D amplified in-wall woofer (Original series)
A800DR amplified in-ceiling woofer (Original series)
164
PART #
PART #
92187
92191
92188
92192
92189
92190
92358
92360
92356
92359
92361
92357
92317
92323
92329
92309
70114
92318
92324
92310
91639
92473
92319
92325
92330
92328
92328
92312
92311
92331
92322
92320
92326
92321
92327
92231
92235
92239
92232
92236
92804
92805
91779
91781
91780
91782
141016
91784
91785
141020
91122
91602
91131
91649
92476
92477
92302
92305
PAGE
PAGE
134
134
134
134
134
134
62
63
61
62
63
61
53
55
57
59
116
53
55
59
87
58, 87
53
54
57
87
58
57
59
56
57
52
54
52
54
49
50
51
49
50
131
131
133
133
133
133
133
132
132
132
135
135
135
135
43
43
64
64
PRODUCT NAME
PART #
PAGE
I n d e x A : A l ph a b e t i c a l
A800 woofer amplifier (120V)
92306
16, 41, 65
A800 woofer amplifier (230V)
92454
16, 41, 65
ACB1 one-zone amplified connecting block
91354
151
Accessory kit (Mariner Extreme, black)
92186
122
Accessory kit (Mariner Extreme, white)
92185
122
Acoustic dampening, in-ceiling
91928
129
Acoustic dampening, in-wall
91698
129
AL2 automatic line-level source selector
90484
146
AL2/S automatic line-level source selector (slave)
90486
146
AS2 automatic speaker-level source selector
90483
146
AS2/S automatic speaker-level source selector (slave)
90485
146
ASAP1D90758
136
ASAP3D SE RMF (120V)
92446
136
ASAP3D SE RMF (230V)
92447
136
Backbox (Invisible series, PBB4)
40065
128
Backbox (Invisible series, PBB6)
40066
128
92808
128
Backcan, deep, fire-rated (listed)
Backcan, shallow, fire-rated (listed)
92807
128
Backcan, square, fire-rated (Contractor series)
91933
128
Bandpass subwoofer (BPS-1)
92478
42
BPS-1 (Visual Performance series)
92478
42
C101 (Contractor series)
91800
69
C201 (Contractor series)
91801
69
C201SQ (Contractor series)
91635
71
C4630 SE home audio system (120V)
92293
137
C4630 SE home audio system (230V)
92294
137
C4630 SE IR remote control
92297
138
C4630 SE main keypad
92295
138
C4630 SE main keypad faceplate kit (almond)
92347
139
C4630 SE main keypad faceplate kit (black)
92349
139
C4630 SE main keypad faceplate kit (brown)
92348
139
C4630 SE main keypad faceplate kit (ivory)
92346
139
C4630 SE main keypad faceplate kit (white)
92345
139
C4630 SE main keypad membrane kit
92340
138
C4630 SE numeric keypad
92296
138
C4630 SE numeric keypad faceplate kit (almond)
92352
139
C4630 SE numeric keypad faceplate kit (black)
92354
139
C4630 SE numeric keypad faceplate kit (brown)
92353
139
C4630 SE numeric keypad faceplate kit (ivory)
92351
139
C4630 SE numeric keypad faceplate kit (white)
92350
139
Cabinet LCR1 (Cinema series)
92829
78
CB1 one-zone connecting block
91353
151
CB2Z two-zone connecting block
91355
151
Cinema cabinet LCR1 (Cinema series)
92829
78
Cinema cabinet LCR1 grille (Cinema series)
92883
114
Cinema ceiling Flex bracket
92800
121
Cinema ceiling square LCR/SUR grille (Cinema series)
92882
114
Cinema in-wall SUB10-250D amplifier (Cinema series, 120V)
92876
81
Cinema in-wall SUB10-250D amplifier (Cinema series, 230V)
92878
81
Cinema in-wall SUB12-500D amplifier (Cinema series, 120V)
92877
81
Cinema in-wall SUB12-500D amplifier (Cinema series, 230V)
92879
81
Cinema LCR1 (Cinema series)
92495
76
Cinema LCR1S (Cinema series)
92810
77
Cinema LCR1/SUR1 Flex bracket
92499
121
Cinema LCR1/SUR1 grille (Cinema series)
92690
113
Cinema LCR2 (Cinema series)
92497
75
Cinema LCR2/SUR2 Flex bracket
92500
121
Cinema LCR2/SUR2 grille (Cinema series)
92691
113
165
166
PRODUCT NAME
PART #
PAGE
Cinema LCR.5S (Cinema series)
Cinema Select Flex bracket
Cinema Select LCR cabinet speaker (Cinema series)
Cinema Select LCR cabinet speaker grille
Cinema Select LCR (Cinema series)
Cinema Select masonry bracket
Cinema Select metal grille (Cinema series)
Cinema Select staple template
Cinema Select SUR (Cinema series)
Cinema Select wood acoustic enclosure
Cinema series Cinema cabinet LCR1
Cinema series Cinema cabinet LCR1 grille
Cinema series Cinema ceiling square LCR/SUR grille
Cinema series Cinema LCR1
Cinema series Cinema LCR1S
Cinema series Cinema LCR1/SUR1 grille
Cinema series Cinema LCR2
Cinema series Cinema LCR2/SUR2 grille
Cinema series Cinema LCR.5S
Cinema series Cinema Select LCR
Cinema series Cinema Select LCR cabinet speaker
Cinema series Cinema Select metal grille
Cinema series Cinema Select SUR
Cinema series Cinema SUB10-250
Cinema series Cinema SUB10-250 enclosure
Cinema series Cinema SUB10-250 grille
Cinema series Cinema SUB12-500
Cinema series Cinema SUB12-500 enclosure
Cinema series Cinema SUB12-500 grille
Cinema series Cinema SUR1
Cinema series Cinema SUR1S
Cinema series Cinema SUR2
Cinema series Cinema SUR.5S
Cinema series in-wall SUB10-250D amplifier (120V)
Cinema series in-wall SUB10-250D amplifier (230V)
Cinema series in-wall SUB12-500D amplifier (120V)
Cinema series in-wall SUB12-500D amplifier (230V)
Cinema series SUB8-100 cabinet subwoofer (120V)
Cinema series SUB8-100 cabinet subwoofer (230V)
Cinema series SUB10-150 cabinet subwoofer (120V)
Cinema series SUB10-150 cabinet subwoofer (230V)
Cinema series SUB12-250 cabinet subwoofer (120V)
Cinema series SUB12-250 cabinet subwoofer (230V)
Cinema series VP85R SUR
Cinema SUB10-250 (Cinema series)
Cinema SUB10-250 enclosure
Cinema SUB10-250 enclosure (Cinema series)
Cinema SUB10-250 grille (Cinema series)
Cinema SUB12-500 (Cinema series)
Cinema SUB12-500 enclosure
Cinema SUB12-500 enclosure (Cinema series)
Cinema SUB12-500 grille (Cinema series)
Cinema SUR1 (Cinema series)
Cinema SUR1S (Cinema series)
Cinema SUR2 (Cinema series)
Cinema SUR.5S (Cinema series)
CM660 (Commercial series)
CM860 (Commercial series, black)
92809
92336
92119
70114
92332
92066
92100
900651
92333
91687
92829
92883
92882
92495
92810
92690
92497
92691
92809
92332
92119
92100
92333
92872
92874
92894
92873
92876
92895
92496
92811
92498
92893
92876
92878
92877
92879
92363
92366
92364
92367
92365
92368
92867
92872
92874
92874
92894
92873
92876
92876
92895
92496
92811
92498
92893
40072
40122
77
121
86
116
86
122
114
122
86
125
78
114
114
76
77
113
75
113
77
86
86
114
86
79
80
113
79
80
113
76
77
75
77
81
81
81
81
83
83
83
83
83
83
84
79
126
80
113
79
126
80
113
76
77
75
77
107
106
PART #
PAGE
CM860 (Commercial series, white)
CM-IW100T iPod touch control mount
CM-IW2000P iPad control mount
Commercial series CM660
Commercial series CM860 (black)
Commercial series CM860 (white)
Commercial series CT8
Commercial series CT10
Commercial series FMS530 (black)
Commercial series FMS530 (white)
Commercial series FMS660 (black)
Commercial series FMS660 (white)
Commercial series FMS860 (black)
Commercial series FMS860 (white)
Commercial series SM516 (black)
Commercial series SM516 (white)
Contractor series C101
Contractor series C201
Contractor series C201SQ
Contractor series CR101
Contractor series CR101SST
Contractor series CR201
Contractor series CR801
Contractor series CR801 metal grille
Contractor series round metal grille
Contractor series square fire-rated backcan
Contractor series square flex bracket
Contractor series square metal grille
Coverplate, ellipse
Coverplate (rectangle, large)
Coverplate (rectangle, medium)
CR1 cabinet-mounted infrared receiver
CR101 (Contractor series)
CR101SST (Contractor series)
CR201 (Contractor series)
CR801 (Contractor series)
CR801 metal grille (Contractor series)
CRKW woofer (Outdoor series)
CT8 (Commercial series)
CT10 (Commercial series)
Decora trim plates
Deep backcan, fire-rated (listed)
E1 mini emitter
E2 dual mini emitters
Ears, rack kit
Ellipse 1.0 LCR (Original series)
Ellipse coverplate
Ellipse Flex bracket
Ellipse LCR grille (Ellipse series)
Ellipse series Ellipse LCR grille
Ellipse series Ellipse SUR grille
Ellipse SUR grille (Ellipse series)
Ellipse SUR (Original series)
Ellipse wood acoustic enclosure
Extreme rectangle grille (Visual Performance series)
Extreme rectangle metal grille (Original series)
Extreme round grille (Visual Performance series)
Extreme round metal grille (Original series)
40073
70090
70091
40072
40122
40073
40054
40055
40077
40076
40079
40078
40081
40080
40075
40074
91800
91801
91635
91803
91806
91804
91807
92013
91944
91933
91942
141215
91974
92244
92334
91343
91803
91806
91804
91807
92013
91960
40054
40055
92164
92808
91348
91350
90603
91902
91974
91922
92009
92009
92010
92010
91961
91921
92812
92212
92813
92213
106
155
155
107
106
106
102
102
104
104
103
103
103
103
105
105
69
69
71
70
71
70
70
112
112
128
120
112
118
118
118
148
70
71
70
70
112
97
102
102
145
128
150
150
41, 43, 65
85
118
122
115
115
115
115
85
126
110
111
110
111
I n d e x A : A l ph a b e t i c a l
PRODUCT NAME
167
168
PRODUCT NAME
PART #
PAGE
Extreme square grille (Visual Performance series)
Extreme XSSTR (Original series)
Extreme XT (Original series)
Extreme XTR (Original series)
Extreme XTR SST (Original series)
Faceplate (iPort, black)
Fire-rated (listed) backcan (iPort)
Fire-rated (listed) deep backcan
Fire-rated (listed) large round backcan
Fire-rated (listed) shallow backcan
Flex bracket (Ellipse)
FMS530 (Commercial series, black)
FMS530 (Commercial series, white)
FMS660 (Commercial series, black)
FMS660 (Commercial series, white)
FMS860 (Commercial series, black)
FMS860 (Commercial series, white)
FS-2 series balanced audio upgrade kit
FS-2 series balanced video upgrade kit
FS-2 series component video cable
FS-2 series composite/S-Video cable
FS-21 free-standing docking system with IR control
FS-22 free-standing docking system with RS-232 control
FS-23 free-standing docking system
FSMR1 full-spectrum IR receiver (black)
FSMR1 full-spectrum IR receiver (silver)
ICC installation compensation circuit
Impedance jumpers, replacement
Installation compensation circuit (ICC)
Invisible series backbox (PBB4)
Invisible series backbox (PBB6)
Invisible series SA1.5
Invisible series SA2
Invisible series SA3
Invisible series SAW
iPod touch upgrade kit for IW 1-5
iPort black faceplate
iPort CM-IW100T iPod touch control mount
iPort CM-IW2000P iPad control mount
iPort EX-1 remote control (black)
iPort EX-1 remote control (white)
iPort fire-rated (listed) backcan
iPort firmware update cable
iPort FS-2 series balanced audio upgrade kit
iPort FS-2 series balanced video upgrade kit
iPort FS-2 series component video cable
iPort FS-2 series composite/S-Video cable
iPort FS-21 free-standing docking system with IR control
iPort FS-22 free-standing docking system with RS-232 control
iPort FS-23 free-standing docking system
iPort IW-1 main PCB upgrade kit
iPort IW-2~IW-5 main PCB upgrade kit
iPort IW-2 series balanced audio upgrade kit
iPort IW-2 series balanced video upgrade kit
iPort IW-2 series RS-232 control upgrade kit
iPort IW-20 in-wall docking system
iPort IW-21 in-wall docking system with IR control
iPort IW-22 in-wall docking system with RS-232 control
92814
91638
91636
91637
91638
70020
70040
92808
91908
92807
91922
40077
40076
40079
40078
40081
40080
70122
70123
70133
70120
70115
70116
70117
92222
92341
40067
70089
40067
40065
40066
92485
40046
92484
92486
70012
70020
70090
70091
70030
70032
70040
70132
70122
70123
70133
70120
70115
70116
70117
70124
70125
70130
70131
70012
70127
70128
70129
110
92
60, 92
60, 92
60
161
160
128
128
128
122
104
104
103
103
103
103
160
160
161
161
158
158
157
149
149
129
143
129
128
128
15
17, 101
15
15
162
161
155
155
160
160
160
161
160
160
161
161
158
158
157
159
159
159
159
159
157
156
156
PART #
PAGE
iPort IW power supply
iPort IW rack-mount panel
iPort IW stud-mount bracket
iPort IW stud-mount bracket (5-pack)
iPort replacement control mode jumpers
IR international package 2
IR international package 3
IR international package 5
IR package 1
IR package 2
IR package 3
IR package 4
IW-1 main PCB upgrade kit
IW-2~IW-5 main PCB upgrade kit
IW-2 series balanced audio upgrade kit
IW-2 series balanced video upgrade kit
IW-2 series RS-232 control upgrade kit
IW-20 in-wall docking system
IW-21 in-wall docking system with IR control
IW-22 in-wall docking system with RS-232 control
IW power supply
IW rack-mount panel
K1 Navigator
K2 Navigator
Large rectangle staple template
Large rectangle wood acoustic enclosure
Large round wood acoustic enclosure
Large square wood acoustic enclosure
LCR1 (Cinema series)
LCR1S (Cinema series)
LCR2 (Cinema series)
LCR.5S (Cinema series)
LCR cabinet speaker (Cinema Select, Cinema series)
LCR cabinet speaker grille (Cinema Select)
LCR (Cinema Select, Cinema series)
LCR flex bracket (medium)
LCR metal grille (Original series)
LCR retrofit enclosure (medium)
LR2 balanced audio receiver
LS2 balanced audio sender
Main keypad faceplate kit (C4630 SE, almond)
Main keypad faceplate kit (C4630 SE, ivory)
Main keypad faceplate kit (C4630 SE, white)
Mariner 51/52 grille (Mariner series, black)
Mariner 51/52 grille (Mariner series, white)
Mariner 51 (Mariner series, black)
Mariner 51 (Mariner series, white)
Mariner 52 (Mariner series, black)
Mariner 52 (Mariner series, white)
Mariner 52 SS (Marine series, black)
Mariner 52 SS (Marine series, white)
Mariner 61/62/63 grille (Mariner series, black)
Mariner 61/62/63 grille (Mariner series, white)
Mariner 61 (Mariner series, black)
Mariner 61 (Mariner series, white)
Mariner 62 (Mariner series, black)
Mariner 62 (Mariner series, white)
Mariner 62 SS (Mariner series, black)
70015
70056
70008
70016
70089
92831
92832
92833
92439
92440
92441
92469
70124
70125
70130
70131
70012
70127
70128
70129
70015
70056
92001
91975
901067
91708
91900
92481
92495
92810
92497
92809
92119
70114
92332
92475
92738
92836
90490
90491
92347
92346
92345
92251
92250
92141
92140
92143
92142
92145
92144
92253
92252
92147
92146
92149
92148
92153
162
160
162
162
161
152
152
152
152
152
152
152
159
159
159
159
159
157
156
156
162
160
140
140
120
124
124
124
76
77
75
77
86
116
86
119
111
127
147
147
139
139
139
115
115
95
95
95
95
95
95
115
115
94
94
94
94
94
I n d e x A : A l ph a b e t i c a l
PRODUCT NAME
169
170
PRODUCT NAME
PART #
PAGE
Mariner 62 SS (Mariner series, white)
Mariner 63 (Mariner series, black)
Mariner 63 (Mariner series, white)
Mariner 82 grille (Mariner series)
Mariner 82 (Mariner series)
Mariner Extreme accessory kit (black)
Mariner Extreme accessory kit (white)
Mariner series Mariner 51/52 grille (black)
Mariner series Mariner 51/52 grille (white)
Mariner series Mariner 51 (black)
Mariner series Mariner 51 (white)
Mariner series Mariner 52 (black)
Mariner series Mariner 52 (white)
Mariner series Mariner 61/62/63 grille (black)
Mariner series Mariner 61/62/63 grille (white)
Mariner series Mariner 61 (black)
Mariner series Mariner 61 (white)
Mariner series Mariner 62 (black)
Mariner series Mariner 62 SS (black)
Mariner series Mariner 62 SS (white)
Mariner series Mariner 62 (white)
Mariner series Mariner 63 (black)
Mariner series Mariner 63 (white)
Mariner series Mariner 82
Mariner series Mariner 82 grille
Marine series Mariner 52 SS (black)
Marine series Mariner 52 SS (white)
Masonry bracket (Cinema Select)
Medium LCR Flex bracket
Medium LCR grille (Visual Performance series)
Medium LCR retrofit enclosure
Medium rectangle masonry bracket
Medium rectangle staple template
Medium rectangle wood acoustic enclosure
Medium round staple template
Medium round wood acoustic enclosure
Medium square wood acoustic enclosure
Membrane kit (Navigator K2)
Mini emitter shield cover
MR1 micro infrared receiver
Navigator K1
Navigator K1 wall plate (almond)
Navigator K1 wall plate (black)
Navigator K1 wall plate (ivory)
Navigator K1 wall plate (white)
Navigator K2
Navigator K2 membrane kit
Navigator K2 wall plate (almond)
Navigator K2 wall plate (black)
Navigator K2 wall plate (ivory)
Navigator K2 wall plate (white)
Numeric keypad faceplate kit (C4630 SE, almond)
Numeric keypad faceplate kit (C4630 SE, black)
Numeric keypad faceplate kit (C4630 SE, brown)
Numeric keypad faceplate kit (C4630 SE, ivory)
Numeric keypad faceplate kit (C4630 SE, white)
ODVC60 60W outdoor volume control
OP3 speaker-level to line-level output pad
92152
92151
92150
92254
92154
92186
92185
92251
92250
92141
92140
92143
92142
92253
92252
92147
92146
92149
92153
92152
92148
92151
92150
92154
92254
92145
92144
92066
92475
92806
92836
92066
900651
91687
901049
91688
92474
91949
92884
91344
92001
92060
92059
92061
92058
91975
91949
91946
91945
91947
91948
92352
92354
92353
92351
92350
91903
900346
94
93
93
114
93
122
122
115
115
95
95
95
95
115
115
94
94
94
94
94
94
93
93
93
114
95
95
122
119
109
127
120
120
124
120
125
125
141
150
148
140
141
141
141
141
140
141
141
141
141
141
139
139
139
139
139
145
147
PART #
PAGE
OptiLinQ IR international package 2
OptiLinQ IR international package 3
OptiLinQ IR international package 5
OptiLinQ IR package 1
OptiLinQ IR package 2
OptiLinQ IR package 3
OptiLinQ IR package 4
Original series 421R
Original series 422
Original series 422R
Original series 422S
Original series 423
Original series 621
Original series 621R
Original series 621R SST
Original series 621R TL
Original series 622
Original series 622C cabinet speaker grille
Original series 622R
Original series 622R TL
Original series 623
Original series 623 LCR
Original series 623 LCR cabinet speaker
Original series 623R
Original series 623R SST
Original series 623R SUR
Original series 623R TL
Original series 623R TL SST
Original series 623S
Original series 623 SST
Original series 624
Original series 624R
Original series 625
Original series 625R
Original series 831
Original series 831R
Original series 831R SST
Original series 832
Original series 832R
Original series A800D amplified in-wall woofer
Original series A800DR amplified in-ceiling woofer
Original series Ellipse 1.0 LCR
Original series Ellipse SUR
Original series Extreme rectangle metal grille
Original series Extreme round metal grille
Original series Extreme XSSTR
Original series Extreme XT
Original series Extreme XTR
Original series Extreme XTR SST
Original series LCR metal grille
Original series P800D passive in-wall woofer
Original series rectangle grille (large)
Original series rectangle grille (medium)
Original series rectangle grille (small)
Original series round grille (large)
Original series round grille (medium)
Original series round grille (small)
Original series S622C cabinet speaker
92831
92832
92833
92439
92440
92441
92469
92358
92356
92359
92361
92357
92317
92323
92329
92309
92318
70114
92324
92310
92319
92473
91639
92325
92330
92328
92311
92312
92331
92322
92320
92326
92321
92327
92231
92235
92239
92232
92236
92302
92305
91902
91961
92212
92213
91638
91636
91637
91638
92738
92303
92289
92100
92087
92290
92101
92088
92116
152
152
152
152
152
152
152
62
61
62
63
61
53
55
57
59
53
116
55
59
53
58, 87
87
54
57
58, 87
59
57
56
57
52
54
52
54
49
50
51
49
50
64
64
85
85
111
111
92
60, 92
60, 92
60
111
64
110
110
110
111
111
111
56
I n d e x A : A l ph a b e t i c a l
PRODUCT NAME
171
172
PRODUCT NAME
PART #
PAGE
Original series square metal grille (medium)
Original series square metal grille (small)
Outdoor series CRKW woofer
Outdoor series RK10W rock woofer (brown)
Outdoor series RK10W rock woofer (granite)
Outdoor series RK63 (brown)
Outdoor series RK63 (granite)
Outdoor series RK83 (brown)
Outdoor series RK83 (granite)
Outdoor series Soundhenge Redux enclosure (brown)
Outdoor series Soundhenge Redux enclosure (granite)
P800D passive in-wall woofer (Original series)
PS1 basic power supply
PS2 high-current power supply
Rack ears kit
Rack filler panel
Rectangle coverplate (large)
Rectangle coverplate (medium)
Rectangle Flex bracket (large)
Rectangle Flex bracket (medium)
Rectangle Flex bracket (small)
Rectangle grille (Original series, large)
Rectangle grille (Original series, medium)
Rectangle grille (Original series, small)
Rectangle grille (Visual Performance series, large)
Rectangle grille (Visual Performance series, medium)
Rectangle grille (Visual Performance series, small)
Rectangle masonry bracket (medium)
Rectangle masonry bracket (small)
Rectangle metal grille (Contractor series)
Rectangle retrofit enclosure (large)
Rectangle retrofit enclosure (medium)
Rectangle retrofit enclosure (small)
Rectangle staple template (large)
Rectangle staple template (medium)
Rectangle wood acoustic enclosure (large)
Rectangle wood acoustic enclosure (medium)
Replacement impedance jumpers
Replacement installation kit (SA2)
RJ-45 2-female to 1-male adapter
RK10W rock woofer (Outdoor series, brown)
RK10W rock woofer (Outdoor series, granite)
RK63 (Outdoor series, brown)
RK63 (Outdoor series, granite)
RK83 (Outdoor series, brown)
RK83 (Outdoor series, granite)
Round coverplate (large)
Round coverplate (medium)
Round Flex bracket (large)
Round Flex bracket (medium)
Round Flex bracket (small)
Round grille (Original series, large)
Round grille (Original series, medium)
Round grille (Original series, small)
Round grille (Visual Performance series, large)
Round grille (Visual Performance series, medium)
Round grille (Visual Performance series, small)
Round metal grille (Contractor series)
92458
92599
91960
92888
92887
92744
92743
92746
92745
92173
92172
92303
91352
91356
90603
92729
92244
92334
92246
92336
92470
92289
92100
92087
92614
92611
92608
92066
92067
91943
92242
92342
92442
901067
900651
91708
91687
70089
40069
92355
92888
92887
92744
92743
92746
92745
92245
92335
92247
92337
92471
92290
92101
92088
92615
92612
92609
91944
111
111
97
96
96
96
96
96
96
97
97
64
152
152
41, 43, 65
136
118
118
119
119
119
110
110
110
109
109
109
120
120
112
127
127
127
120
120
124
124
143
123
139
96
96
96
96
96
96
118
118
119
119
119
111
111
111
109
109
109
112
PART #
PAGE
Round retrofit enclosure (large)
Round retrofit enclosure (medium)
Round retrofit enclosure (small)
Round staple template (medium)
Round wood acoustic enclosure (large)
Round wood acoustic enclosure (medium)
Round wood acoustic enclosure (small)
S622C cabinet speaker (Original series)
SA1.5 (Invisible Series)
SA1.5 space saver
SA2 backbox (4-inch depth)
SA2 backbox (6-inch depth)
SA2 installation compensation circuit
SA2 (Invisible series)
SA2 replacement installation kit
SA3 (Invisible series)
SA3 space saver
SAW (Invisible series)
SAW space saver
Shallow backcan, fire-rated (listed)
SM55 mounting plate (Surface Mount series)
SM55/SM55 SST replacement grille (Surface Mount series)
SM55 SST mounting plate (Surface Mount series)
SM55 SST (Surface Mount series)
SM55 (Surface Mount series)
SM516 (Commercial series, black)
SM516 (Commercial series, white)
Small rectangle masonry bracket
Small round wood acoustic enclosure
Small square wood acoustic enclosure
SMR1P surface-mount IR receiver
SMR1 surface-mount IR receiver
Sonafill in-ceiling acoustic dampening
Sonafill in-wall acoustic dampening
Sonamp 275 SE (120V)
Sonamp 275 SE (230V)
Sonamp 275 SE RMF (120V)
Sonamp 275 SE RMF (230V)
Sonamp 275X3 SE
Sonamp 275X3 SE RMF
Sonamp 875D MKII multi-channel amplifier (120V)
Sonamp 875D MKII multi-channel amplifier (230V)
Sonamp 1230 (120V)
Sonamp 1230 (230V)
Sonamp 1230 RMF (120V)
Sonamp 1230 RMF (230V)
Sonamp 1230 RMF faceplate
Sonamp 1250 MKII
Sonamp 1250 MKII RMF
Sonamp 1250 MKII RMF faceplate
Sonamp 2120T MKII (120V)
Sonamp 2120T MKII (230V)
Sonamp 2120T MKII RMF (120V)
Sonamp 2120T MKII RMF (230V)
Sonamp A150 subwoofer amplifier (120V)
Sonamp A150 subwoofer amplifier (230V)
Sonamp A800 woofer amplifier (120V)
Sonamp A800 woofer amplifier (230V)
92243
92343
92443
901049
91900
91688
92445
92116
92485
92722
40065
40066
40067
40046
40069
92484
92723
92486
92723
92807
92494
92749
92803
92802
92493
40075
40074
92067
92445
92449
91346
91345
91928
91698
92187
92191
92188
92192
92189
92190
92804
92805
91779
91781
91780
91782
141016
91784
91785
141020
91122
91602
91131
91649
92476
92477
92306
92454
127
127
127
120
124
125
125
56
15
16, 123
17
17
17
17, 101
17, 123
15
16, 123
15
16, 123
128
47
47
47
47
47
105
105
120
125
125
149
148
129
129
134
134
134
134
134
134
131
131
133
133
133
133
133
132
132
132
135
135
135
135
43
43
16, 41, 65
16, 41, 65
I n d e x A : A l ph a b e t i c a l
PRODUCT NAME
173
174
PRODUCT NAME
PART #
PAGE
Soundhenge Redux enclosure (Outdoor series, brown)
Soundhenge Redux enclosure (Outdoor series, granite)
Space saver (SA1.5)
Space saver (SA3)
Space saver (SAW)
Square fire-rated backcan (Contractor series)
Square flex bracket (Contractor series)
Square Flex bracket (large)
Square Flex bracket (medium)
Square Flex bracket (small)
Square grille (Visual Performance series, large)
Square grille (Visual Performance series, medium)
Square grille (Visual Performance series, small)
Square metal grille (Contractor series)
Square metal grille (Original series, medium)
Square metal grille (Original series, small)
Square retrofit enclosure (large)
Square retrofit enclosure (medium)
Square retrofit enclosure (small)
Square wood acoustic enclosure (large)
Square wood acoustic enclosure (medium)
Square wood acoustic enclosure (small)
SS4 speaker selector
SS4VC speaker selector with volume control
SS6 speaker selector
SS6VC speaker selector with volume control
Staple template (Cinema Select)
SUB8-100 cabinet subwoofer (Cinema series, 120V)
SUB8-100 cabinet subwoofer (Cinema series, 230V)
SUB8-100 cabinet subwoofer grille
SUB10-150 cabinet subwoofer (Cinema series, 120V)
SUB10-150 cabinet subwoofer (Cinema series, 230V)
SUB10-150 cabinet subwoofer grille
SUB10-250 (Cinema series)
SUB10-250 enclosure
SUB10-250 enclosure (Cinema series)
SUB12-250 cabinet subwoofer (Cinema series, 120V)
SUB12-250 cabinet subwoofer (Cinema series, 230V)
SUB12-250 cabinet subwoofer grille
SUB12-500 (Cinema series)
SUB12-500 enclosure
SUB12-500 enclosure (Cinema series)
SUR1 (Cinema series)
SUR1S (Cinema series)
SUR2 (Cinema series)
SUR.5S (Cinema series)
SUR (Cinema Select, Cinema series)
Surface Mount series SM55
Surface Mount series SM55 mounting plate
Surface Mount series SM55/SM55 SST replacement grille
Surface Mount series SM55 SST
Surface Mount series SM55 SST mounting plate
Symphony 623 LCR cabinet speaker grille
System package for Cinema SUB10-250 (120V)
System package for Cinema SUB10-250 (230V)
System package for Cinema SUB12-500 (120V)
System package for Cinema SUB12-500 (230V)
Trim plates, Decora
92173
92172
92722
92723
92723
91933
91942
92801
92344
92472
92616
92613
92610
141215
92458
92599
92243
92343
92443
92481
92474
92449
91368
91931
91369
91932
900651
92363
92366
142660
92364
92367
14266
92872
92874
92874
92365
92368
142662
92873
92876
92876
92496
92811
92498
92893
92333
92493
92494
92749
92802
92803
700493
92897
92898
92896
92899
92164
97
97
123
123
123
128
120
119
119
119
109
109
109
112
111
111
127
127
127
124
125
125
142
142
142
142
122
83
83
117
83
83
117
79
126
80
83
83
116
79
126
80
76
77
75
77
86
47
47
47
47
47
116
82
82
82
82
145
PART #
PAGE
Vapor barrier
VC30R 30W volume control, rotary (boxed, white)
VC60R 60W volume control, rotary (boxed, white)
VC60RIM 60W volume control, rotary (white)
VC60S 60W volume control, slider (boxed, white)
VC60SIM 60W volume control, slider (white)
VE1 visible IR emitter
VE2 dual visible IR emitters
Visual Performance series BPS-1
Visual Performance series extreme rectangle grille
Visual Performance series Extreme round grille
Visual Performance series Extreme square grille
Visual Performance series medium LCR grille
Visual Performance series rectangle grille (large)
Visual Performance series rectangle grille (medium)
Visual Performance series rectangle grille (small)
Visual Performance series round grille (large)
Visual Performance series round grille (medium)
Visual Performance series round grille (small)
Visual Performance series square grille (large)
Visual Performance series square grille (medium)
Visual Performance series square grille (small)
Visual Performance series VP4R BPC
Visual Performance series VP4S BPC
Visual Performance series VP6R BPC
Visual Performance series VP6S BPC
Visual Performance series VP41
Visual Performance series VP41R
Visual Performance series VP41S
Visual Performance series VP45
Visual Performance series VP45R
Visual Performance series VP45R SST
Visual Performance series VP45S
Visual Performance series VP45S SST
Visual Performance series VP49
Visual Performance series VP49R
Visual Performance series VP49S
Visual Performance series VP61
Visual Performance series VP61R
Visual Performance series VP61R SST
Visual Performance series VP61R SST TL
Visual Performance series VP61R TL
Visual Performance series VP61S
Visual Performance series VP63
Visual Performance series VP63R
Visual Performance series VP63R TL
Visual Performance series VP65
Visual Performance series VP65R
Visual Performance series VP65R SST
Visual Performance series VP65R SST TL
Visual Performance series VP65R SST XT
Visual Performance series VP65R SUR surround
Visual Performance series VP65R TL thinline
Visual Performance series VP65R XT extreme
Visual Performance series VP65S
Visual Performance series VP65S SST
Visual Performance series VP65 SST
Visual Performance series VP65S SUR surround
91703
91497
91505
92158
91521
92161
91349
91351
92478
92812
92813
92814
92806
92614
92611
92608
92615
92612
92609
92616
92613
92610
92868
92869
92870
92871
92840
92841
92842
92565
92505
92846
92535
92847
92843
92844
92845
92848
92849
92851
92857
92855
92850
92852
92853
92856
92575
92515
92730
92858
92753
92732
92601
92752
92545
92731
92734
92733
129
144
144
143
144
143
150
150
42
110
110
110
109
109
109
109
109
109
109
109
109
109
43
43
42
42
37
38
39
37
38
40
39
40
37
38
39
27
29
32
35
35
30
27
29
35
26
28
31
35
36, 92
32, 84
34
36, 91
30
31
31
33, 84
I n d e x A : A l ph a b e t i c a l
PRODUCT NAME
175
176
PRODUCT NAME
PART #
PAGE
Visual Performance series VP65S TL thinline
Visual Performance series VP65S XT extreme
Visual Performance series VP65 TL thinline
Visual Performance series VP65 XT Extreme
Visual Performance series VP67
Visual Performance series VP67 LCR surround
Visual Performance series VP67R
Visual Performance series VP69
Visual Performance series VP69R
Visual Performance series VP69S
Visual Performance series VP81
Visual Performance series VP81R
Visual Performance series VP81S
Visual Performance series VP83
Visual Performance series VP83R
Visual Performance series VP85
Visual Performance series VP85R
Visual Performance series VP85R SST
Visual Performance series VP85R SUR
Visual Performance series VP85R W
Visual Performance series VP85S
Visual Performance series VP85S SST
Visual Performance series VP85s W
Visual Performance series VP85 W
Visual Performance series VP87
Visual Performance series VP87R
Visual Performance series VP89
Visual Performance series VP89R
Visual Performance series VP89S
VP4R BPC (Visual Performance series)
VP4S BPC (Visual Performance series)
VP6R BPC (Visual Performance series)
VP6S BPC (Visual Performance series)
VP41R (Visual Performance series)
VP41S (Visual Performance series)
VP41 (Visual Performance series)
VP45R SST (Visual Performance series)
VP45R (Visual Performance series)
VP45S SST (Visual Performance series)
VP45S (Visual Performance series)
VP45 (Visual Performance series)
VP49R (Visual Performance series)
VP49S (Visual Performance series)
VP49 (Visual Performance series)
VP61R SST TL (Visual Performance series)
VP61R SST (Visual Performance series)
VP61R TL (Visual Performance series)
VP61R (Visual Performance series)
VP61S (Visual Performance series)
VP61 (Visual Performance series)
VP63R TL (Visual Performance series)
VP63R (Visual Performance series)
VP63 (Visual Performance series)
VP65R SST TL (Visual Performance series)
VP65R SST (Visual Performance series)
VP65R SST XT (Visual Performance series)
VP65R SUR surround (Visual Performance series)
VP65R TL thinline (Visual Performance series)
92602
92835
92600
92751
92576
92724
92516
92577
92517
92854
92859
92860
92861
92862
92863
92585
92525
92865
92867
92741
92555
92866
92742
92740
92586
92526
92587
92527
92864
92868
92869
92870
92871
92841
92842
92840
92846
92505
92847
92535
92565
92844
92845
92843
92857
92851
92855
92849
92850
92848
92856
92853
92852
92858
92730
92753
92732
92601
34
36,
34
36,
26
32,
28
26
28
30
21
23
24
21
23
21
22
25
25
41
24
25
41
40
20
22
20
22
24
43
43
42
42
38
39
37
40
38
40
39
37
38
39
37
35
32
35
29
30
27
35
29
27
35
31
36,
32,
34
91
91
84
92
84
PART #
PAGE
VP65R (Visual Performance series)
VP65R XT extreme (Visual Performance series)
VP65S SST (Visual Performance series)
VP65 SST (Visual Performance series)
VP65S SUR surround (Visual Performance series)
VP65S TL thinline (Visual Performance series)
VP65S (Visual Performance series)
VP65S XT extreme (Visual Performance series)
VP65 TL thinline (Visual Performance series)
VP65 (Visual Performance series)
VP65 XT Extreme (Visual Performance series)
VP67 LCR surround (Visual Performance series)
VP67R (Visual Performance series)
VP67 (Visual Performance series)
VP69R (Visual Performance series)
VP69S (Visual Performance series)
VP69 (Visual Performance series)
VP81R (Visual Performance series)
VP81S (Visual Performance series)
VP81 (Visual Performance series)
VP83R (Visual Performance series)
VP83 (Visual Performance series)
VP85R SST (Visual Performance series)
VP85R SUR (Cinema series)
VP85R SUR (Visual Performance series)
VP85R (Visual Performance series)
VP85R W (Visual Performance series)
VP85S SST (Visual Performance series)
VP85S (Visual Performance series)
VP85 (Visual Performance series)
VP85 W (Visual Performance series)
VP87R (Visual Performance series)
VP87 (Visual Performance series)
VP89R (Visual Performance series)
VP89S (Visual Performance series)
VP89 (Visual Performance series)
Wall plate (Navigator K1, almond)
Wall plate (Navigator K1, black)
Wall plate (Navigator K1, ivory)
Wall plate (Navigator K1, white)
Wall plate (Navigator K2, almond)
Wall plate (Navigator K2, black)
Wall plate (Navigator K2, ivory)
Wall plate (Navigator K2, white)
WMR1 wall-mount IR receiver
Wood acoustic enclosure (Cinema Select)
Wood acoustic enclosure (Ellipse)
92515
92752
92731
92734
92733
92602
92545
92835
92600
92575
92751
92724
92516
92576
92517
92854
92577
92860
92861
92859
92863
92862
92865
92867
92867
92525
92741
92866
92555
92585
92740
92526
92586
92527
92864
92587
92060
92059
92061
92058
91946
91945
91947
91948
91347
91687
91921
28
36, 91
31
31
33, 84
34
30
36, 91
34
26
36, 91
32, 84
28
26
28
30
26
23
24
21
23
21
25
84
25
22
41
25
24
21
40
22
20
22
24
20
141
141
141
141
141
141
141
141
149
125
126
I n d e x A : A l ph a b e t i c a l
PRODUCT NAME
177
Index B: Part Numbers
PRODUCT NAME
PART #
PRODUCT NAME
PART #
14266SUB10-150 cabinet subwoofer grille
40046
Invisible series SA2
40054Commercial series CT8
40055Commercial series CT10
40065
Invisible series backbox (PBB4)
40066
Invisible series backbox (PBB6)
40067SA2 installation compensation circuit
40069
Replacement installation kit (SA2)
40072Commercial series CM660
40073Commercial series CM860 (white)
40074Commercial series SM516 (white)
40075Commercial series SM516 (black)
40076Commercial series FMS530 (white)
40077Commercial series FMS530 (black)
40078Commercial series FMS660 (white)
40079Commercial series FMS660 (black)
40080Commercial series FMS860 (white)
40081Commercial series FMS860 (black)
40122Commercial series CM860 (black)
70008
iPort IW stud-mount bracket
70012
iPort IW-2 series RS-232 control upgrade kit
iPort IW power supply
70015
70016
iPort IW stud-mount bracket (5-pack)
70020
iPort black faceplate
70030
iPort EX-1 remote control (black)
70032
iPort EX-1 remote control (white)
70040
iPort fire-rated (listed) backcan
70056
iPort IW rack-mount panel
70089
iPort replacement control mode jumpers
70090
iPort CM-IW100T iPod touch control mount
70091
iPort CM-IW2000P iPad control mount
70114Original series 622C cabinet speaker grille
70115
iPort FS-21 free-standing docking system with IR control
70116
iPort FS-22 free-standing docking system with RS-232 control
70117
iPort FS-23 free-standing docking system
70120
iPort FS-2 series composite/S-Video cable
70122
iPort FS-2 series balanced audio upgrade kit
70123
iPort FS-2 series balanced video upgrade kit
70124
iPort IW-1 main PCB upgrade kit
70125
iPort IW-2~IW-5 main PCB upgrade kit
70127
iPort IW-20 in-wall docking system
iPort IW-21 in-wall docking system with IR control
70128
70129
iPort IW-22 in-wall docking system with RS-232 control
70130
iPort IW-2 series balanced audio upgrade kit
70131
iPort IW-2 series balanced video upgrade kit
70132
iPort firmware update cable
70133
iPort FS-2 series component video cable
90483AS2 automatic speaker-level source selector
90484AL2 automatic line-level source selector
90485AS2/S automatic speaker-level source selector (slave)
90486AL2/S automatic line-level source selector (slave)
90490LR2 balanced audio receiver
90491LS2 balanced audio sender
90603
Rack ears kit
90758ASAP1D
91122Sonamp 2120T MKII (120V)
91131Sonamp 2120T MKII RMF (120V)
91343CR1 cabinet-mounted infrared receiver
178
PAGE
PAGE
117
17, 101
102
102
128
128, 17
17, 129
17, 123
107
106
105
105
104
104
103
103
103
103
106
162
159, 162
162
162
161
160
160
160
160
161
155
155
116
158
158
157
161
160
160
159
159
157
156
156
159
159
161
161
146
146
146
146
147
147
41, 43, 65
136
135
135
148
PART #
PRODUCT NAME
148
148
149
149
150
150
150
150
152
151
151
151
152
142
142
144
144
144
135
71
60, 92
60, 92
60, 92
87
135
124
125
129
129
124
133
133
133
133
132
132
69
69
70
70
71
70
124
85
145
128
126
122
129
142
142
128
120
112
112
141
141
141
I n d e x B : Pa r t Num b e r s
91344
MR1 micro infrared receiver
91345SMR1 surface-mount IR receiver
91346SMR1P surface-mount IR receiver
91347
WMR1 wall-mount IR receiver
91348E1 mini emitter
91349
VE1 visible IR emitter
91350E2 dual mini emitters
91351
VE2 dual visible IR emitters
91352
PS1 basic power supply
91353CB1 one-zone connecting block
91354
ACB1 one-zone amplified connecting block
91355CB2Z two-zone connecting block
91356
PS2 high-current power supply
91368SS4 speaker selector
91369SS6 speaker selector
VC30R 30W volume control, rotary (boxed, white)
91497
91505
VC60R 60W volume control, rotary (boxed, white)
91521
VC60S 60W volume control, slider (boxed, white)
91602Sonamp 2120T MKII (230V)
91635Contractor series C201SQ
91636Original series Extreme XT
91637Original series Extreme XTR
91638Original series Extreme XSSTR
91639Original series 623 LCR cabinet speaker
91649Sonamp 2120T MKII RMF (230V)
91687
Medium rectangle wood acoustic enclosure
91688
Medium round wood acoustic enclosure
91698
Sonafill in-wall acoustic dampening
91703
Vapor barrier
91708Large rectangle wood acoustic enclosure
91779Sonamp 1230 (120V)
91780Sonamp 1230 RMF (120V)
91781Sonamp 1230 (230V)
91782Sonamp 1230 RMF (230V)
91784Sonamp 1250 MKII
91785Sonamp 1250 MKII RMF
91800Contractor series C101
91801Contractor series C201
91803Contractor series CR101
91804Contractor series CR201
91806Contractor series CR101SST
91807Contractor series CR801
91900Large round wood acoustic enclosure
91902Original series Ellipse 1.0 LCR
91903ODVC60 60W outdoor volume control
91908Fire-rated (listed) large round backcan
91921Ellipse wood acoustic enclosure
91922Ellipse Flex bracket
91928
Sonafill in-ceiling acoustic dampening
91931SS4VC speaker selector with volume control
91932SS6VC speaker selector with volume control
91933
Contractor series square fire-rated backcan
91942
Contractor series square flex bracket
91943
Rectangle metal grille (Contractor series)
91944Contractor series round metal grille
91945Navigator K2 wall plate (black)
91946Navigator K2 wall plate (almond)
91947Navigator K2 wall plate (ivory)
PAGE
179
PART #
PRODUCT NAME
91948Navigator K2 wall plate (white)
91949Navigator K2 membrane kit
91960Outdoor series CRKW woofer
91961Original series Ellipse SUR
91974Ellipse coverplate
91975Navigator K2
92001Navigator K1
92009Ellipse series Ellipse LCR grille
92010Ellipse series Ellipse SUR grille
92013Contractor series CR801 metal grille
92058Navigator K1 wall plate (white)
92059Navigator K1 wall plate (black)
92060Navigator K1 wall plate (almond)
92061Navigator K1 wall plate (ivory)
92066
Medium rectangle masonry bracket
92067Small rectangle masonry bracket
92087Original series rectangle grille (small)
92088Original series round grille (small)
92100Original series rectangle grille (medium)
92101Original series round grille (medium)
92116Original series S622C cabinet speaker
92119Cinema series Cinema Select LCR cabinet speaker
92140
Mariner series Mariner 51 (white)
92141
Mariner series Mariner 51 (black)
92142
Mariner series Mariner 52 (white)
92143
Mariner series Mariner 52 (black)
92144
Marine series Mariner 52 SS (white)
92145
Marine series Mariner 52 SS (black)
92146
Mariner series Mariner 61 (white)
92147
Mariner series Mariner 61 (black)
92148
Mariner series Mariner 62 (white)
92149
Mariner series Mariner 62 (black)
92150
Mariner series Mariner 63 (white)
92151
Mariner series Mariner 63 (black)
92152
Mariner series Mariner 62 SS (white)
92153
Mariner series Mariner 62 SS (black)
92154
Mariner series Mariner 82
92158
VC60RIM 60W volume control, rotary (white)
92161
VC60SIM 60W volume control, slider (white)
92164Decora trim plates
92172Outdoor series Soundhenge Redux enclosure (granite)
92173Outdoor series Soundhenge Redux enclosure (brown)
92185
Mariner Extreme accessory kit (white)
Mariner Extreme accessory kit (black)
92186
92187Sonamp 275 SE (120V)
92188Sonamp 275 SE RMF (120V)
92189Sonamp 275X3 SE
92190Sonamp 275X3 SE RMF
92191Sonamp 275 SE (230V)
92192Sonamp 275 SE RMF (230V)
92212Original series Extreme rectangle metal grille
92213Original series Extreme round metal grille
92222FSMR1 full-spectrum IR receiver (black)
92231Original series 831
92232Original series 832
92235Original series 831R
92236Original series 832R
92239Original series 831R SST
180
PAGE
141
141
97
85
118
140
140
115
115
112
141
141
141
141
120
120
110
111
110
111
56
86
95
95
95
95
95
95
94
94
94
94
93
93
94
94
93
143
143
145
97
97
122
122
134
134
134
134
134
134
111
111
149
49
49
50
50
51
PART #
PRODUCT NAME
PAGE
127
127
118
118
119
119
115
115
115
115
114
110
111
137
137
138
138
138
64
64
64
16, 41, 65
59
59
59
57
53
53
53
52
52
57
55
55
54
54
54
58, 87
57
57
56
86
86
118
118
121
119
138
149
127
127
119
139
139
139
139
139
139
I n d e x B : Pa r t Num b e r s
92242
Rectangle retrofit enclosure (large)
92243
Round & square retrofit enclosure (large)
92244
Rectangle coverplate (large)
92245
Round coverplate (large)
92246
Rectangle Flex bracket (large)
92247
Round Flex bracket (large)
92250
Mariner series Mariner 51/52 grille (white)
92251
Mariner series Mariner 51/52 grille (black)
92252
Mariner series Mariner 61/62/63 grille (white)
92253
Mariner series Mariner 61/62/63 grille (black)
92254
Mariner series Mariner 82 grille
92289Original series rectangle grille (large)
92290Original series round grille (large)
92293C4630 SE home audio system (120V)
92294C4630 SE home audio system (230V)
92295C4630 SE main keypad
92296C4630 SE numeric keypad
92297C4630 SE IR remote control
92302
Original series A800D amplified in-wall woofer
92303Original series P800D passive in-wall woofer
92305
Original series A800DR amplified in-ceiling woofer
92306
Sonamp A800 woofer amplifier (120V)
92309Original series 621R TL
92310Original series 622R TL
92311Original series 623R TL
92312Original series 623R TL SST
92317Original series 621
92318Original series 622
92319Original series 623
92320Original series 624
92321Original series 625
92322Original series 623 SST
92323Original series 621R
92324Original series 622R
92325Original series 623R
92326Original series 624R
92327Original series 625R
92328Original series 623R SUR
92329Original series 621R SST
92330Original series 623R SST
92331Original series 623S
92332Cinema series Cinema Select LCR
92333Cinema series Cinema Select SUR
92334
Rectangle coverplate (medium)
92335
Round coverplate (medium)
92336Cinema Select Flex bracket
92337
Round Flex bracket (medium)
92340C4630 SE main keypad membrane kit
92341FSMR1 full-spectrum IR receiver (silver)
92342
Rectangle retrofit enclosure (medium)
92343
Round & square retrofit enclosure (medium)
92344Square Flex bracket (medium)
92345C4630 SE main keypad faceplate kit (white)
92346C4630 SE main keypad faceplate kit (ivory)
92347C4630 SE main keypad faceplate kit (almond)
92348C4630 SE main keypad faceplate kit (brown)
92349C4630 SE main keypad faceplate kit (black)
92350C4630 SE numeric keypad faceplate kit (white)
181
PART #
PRODUCT NAME
92351C4630 SE numeric keypad faceplate kit (ivory)
92352C4630 SE numeric keypad faceplate kit (almond)
92353C4630 SE numeric keypad faceplate kit (brown)
92354C4630 SE numeric keypad faceplate kit (black)
92355
RJ-45 2-female to 1-male adapter
92356Original series 422
92357Original series 423
92358Original series 421R
92359Original series 422R
421R SST (Original series)
92360
92361Original series 422S
92363Cinema series SUB8-100 cabinet subwoofer (120V)
92364Cinema series SUB10-150 cabinet subwoofer (120V)
92365Cinema series SUB12-250 cabinet subwoofer (120V)
92366Cinema series SUB8-100 cabinet subwoofer (230V)
92367Cinema series SUB10-150 cabinet subwoofer (230V)
92368Cinema series SUB12-250 cabinet subwoofer (230V)
92439OptiLinQ IR package 1
92440OptiLinQ IR package 2
92441OptiLinQ IR package 3
92442
Rectangle retrofit enclosure (small)
92443
Round & square retrofit enclosure (small)
92445Small round wood acoustic enclosure
92446ASAP3D SE RMF (120V)
92447ASAP3D SE RMF (230V)
92449Small square wood acoustic enclosure
92454
Sonamp A800 woofer amplifier (230V)
92458Original series square metal grille (medium)
92469OptiLinQ IR package 4
92470
Rectangle Flex bracket (small)
92471
Round Flex bracket (small)
92472Square Flex bracket (small)
92473Original series 623 LCR
92474
Medium square wood acoustic enclosure
92475
Medium LCR Flex bracket
92476
Sonamp A150 subwoofer amplifier (120V)
92477
Sonamp A150 subwoofer amplifier (230V)
92478
Visual Performance series BPS-1
92481Large square wood acoustic enclosure
Invisible series SA3
92484
92485
Invisible series SA1.5
Invisible series SAW
92486
92493Surface Mount series SM55
92494Surface Mount series SM55 mounting plate
92495Cinema series Cinema LCR1
92496Cinema series Cinema SUR1
92497Cinema series Cinema LCR2
92498Cinema series Cinema SUR2
92499Cinema LCR1/SUR1 Flex bracket
92500Cinema LCR2/SUR2 Flex bracket
92505
Visual Performance series VP45R
92515
Visual Performance series VP65R
92516
Visual Performance series VP67R
92517
Visual Performance series VP69R
92525
Visual Performance series VP85R
92526
Visual Performance series VP87R
92527
Visual Performance series VP89R
92535
Visual Performance series VP45S
182
PAGE
139
139
139
139
139
61
61
62
62
63
63
83
83
83
83
83
83
152
152
152
127
127
125
136
136
125
16, 41, 65
111
152
119
119
119
58, 87
125
119
43
43
42
124
15
15
15
47
47
76
76
75
75
121
121
38
28
28
28
22
22
22
39
PART #
PRODUCT NAME
30
24
37
26
26
26
21
20
20
111
34
34
34
109
109
109
109
109
109
109
109
109
113
113
16, 123
16, 123
32, 84
136
31
31
32, 84
33, 84
31
111
40
41
41
96
96
96
96
47
36, 91
36, 91
36, 92
121
119
47
47
131
131
109
128
128
77
77
77
110
I n d e x B : Pa r t Num b e r s
92545
Visual Performance series VP65S
92555
Visual Performance series VP85S
92565
Visual Performance series VP45
92575
Visual Performance series VP65
92576
Visual Performance series VP67
92577
Visual Performance series VP69
92585
Visual Performance series VP85
92586
Visual Performance series VP87
92587
Visual Performance series VP89
92599Original series square metal grille (small)
92600
Visual Performance series VP65 TL thinline
92601
Visual Performance series VP65R TL thinline
92602
Visual Performance series VP65S TL thinline
92608
Visual Performance series rectangle grille (small)
92609
Visual Performance series round grille (small)
92610
Visual Performance series square grille (small)
Visual Performance series rectangle grille (medium)
92611
92612
Visual Performance series round grille (medium)
92613
Visual Performance series square grille (medium)
92614
Visual Performance series rectangle grille (large)
92615
Visual Performance series round grille (large)
92616
Visual Performance series square grille (large)
92690Cinema series Cinema LCR1/SUR1 grille
92691Cinema series Cinema LCR2/SUR2 grille
92722SA1.5 space saver
92723SA3/SAW space saver
92724
Visual Performance series VP67 LCR surround
92729
Rack filler panel
92730
Visual Performance series VP65R SST
92731
Visual Performance series VP65S SST
92732
Visual Performance series VP65R SUR surround
92733
Visual Performance series VP65S SUR surround
92734
Visual Performance series VP65 SST
92738Original series LCR metal grille
92740
Visual Performance series VP85 W
92741
Visual Performance series VP85R W
92742
Visual Performance series VP85s W
92743Outdoor series RK63 (granite)
92744Outdoor series RK63 (brown)
92745Outdoor series RK83 (granite)
92746Outdoor series RK83 (brown)
92749Surface Mount series SM55/SM55 SST replacement grille
92751
Visual Performance series VP65 XT Extreme
92752
Visual Performance series VP65R XT extreme
92753
Visual Performance series VP65R SST XT
92800Cinema ceiling Flex bracket
92801Square Flex bracket (large)
92802Surface Mount series SM55 SST
92803Surface Mount series SM55 SST mounting plate
92804
Sonamp 875D MKII multi-channel amplifier (120V)
92805
Sonamp 875D MKII multi-channel amplifier (230V)
92806
Visual Performance series medium LCR grille
92807Fire-rated (listed) shallow backcan
92808Fire-rated (listed) deep backcan
92809Cinema series Cinema LCR.5S
92810Cinema series Cinema LCR1S
92811Cinema series Cinema SUR1S
92812
Visual Performance series extreme rectangle grille
PAGE
183
PART #
PRODUCT NAME
92813
Visual Performance series Extreme round grille
92814
Visual Performance series Extreme square grille
92829Cinema series Cinema cabinet LCR1
92831OptiLinQ IR international package 2
92832OptiLinQ IR international package 3
92833OptiLinQ IR international package 5
92835
Visual Performance series VP65S XT extreme
92836
Medium LCR retrofit enclosure
92840
Visual Performance series VP41
92841
Visual Performance series VP41R
92842
Visual Performance series VP41S
92843
Visual Performance series VP49
92844
Visual Performance series VP49R
Visual Performance series VP49S
92845
92846
Visual Performance series VP45R SST
92847
Visual Performance series VP45S SST
92848
Visual Performance series VP61
92849
Visual Performance series VP61R
92850
Visual Performance series VP61S
92851
Visual Performance series VP61R SST
92852
Visual Performance series VP63
92853
Visual Performance series VP63R
92854
Visual Performance series VP69S
92855
Visual Performance series VP61R TL
92856
Visual Performance series VP63R TL
92857
Visual Performance series VP61R SST TL
92858
Visual Performance series VP65R SST TL
92859
Visual Performance series VP81
92860
Visual Performance series VP81R
92861
Visual Performance series VP81S
92862
Visual Performance series VP83
92863
Visual Performance series VP83R
92864
Visual Performance series VP89S
92865
Visual Performance series VP85R SST
92866
Visual Performance series VP85S SST
92867
Visual Performance series VP85R SUR
92868
Visual Performance series VP4R BPC
92869
Visual Performance series VP4S BPC
92870
Visual Performance series VP6R BPC
92871
Visual Performance series VP6S BPC
92872Cinema series Cinema SUB10-250
92873Cinema series Cinema SUB12-500
92874Cinema series Cinema SUB10-250 enclosure
92876Cinema series Cinema SUB12-500 enclosure
92877
Cinema series in-wall SUB12-500D amplifier (120V)
92878
Cinema series in-wall SUB10-250D amplifier (230V)
92879
Cinema series in-wall SUB12-500D amplifier (230V)
92882Cinema series Cinema ceiling square LCR/SUR grille
92883Cinema series Cinema cabinet LCR1 grille
92884
Mini emitter shield cover
92887Outdoor series RK10W rock woofer (granite)
92888Outdoor series RK10W rock woofer (brown)
92893Cinema series Cinema SUR.5S
92894Cinema series Cinema SUB10-250 grille
92895Cinema series Cinema SUB12-500 grille
92896System package for Cinema SUB12-500 (120V)
92897System package for Cinema SUB10-250 (120V)
92898System package for Cinema SUB10-250 (230V)
184
PAGE
110
110
78
152
152
152
36, 91
127
37
38
39
37
38
39
40
40
27
29
30
32
27
29
30
35
35
35
35
21
23
24
21
23
24
25
25
25
43
43
42
42
79
79
80, 126
80, 126
81
81
81
114
114
150
96
96
77
113
113
82
82
82
PART #
PRODUCT NAME
92899System package for Cinema SUB12-500 (230V)
141016Sonamp 1230 RMF faceplate
141020Sonamp 1250 MKII RMF faceplate
141215Contractor series square metal grille
142660SUB8-100 cabinet subwoofer grille
142662SUB12-250 cabinet subwoofer grille
700493Symphony 623 LCR cabinet speaker grille
900346OP3 speaker-level to line-level output pad
900651
Medium rectangle staple template
901049
Medium round staple template
901067Large rectangle staple template
PAGE
82
133
132
112
117
116
116
147
120
120
120
I n d e x B : Pa r t Num b e r s
185
notes
186
N ot e s
187
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement