HD-SDI Converter - Flight Display Systems

HD-SDI Converter - Flight Display Systems
FDCONV-HDSDI-S Ver SW/FDCONV-HDSDI-D Ver SW
HD-SDI Converter
Key Facts:
Features
The FDCONV-HDSDI-S Ver SW accepts HDMI, VGA, and
Composite signals to be converted to HD-SDI. The converter
accepts one HD-SDI input and through dual selection
switching is capable, via an external switch, of toggling
between the HD-SDI input and one of the other three available
inputs; ie: HDMI, VGA or Composite. When switching from
HD-SDI to HDMI, VGA or Composite, the converter selects the
input based on priority sourcing (highest resolution to lowest).
•
FDCONV-HDSDI-D Ver SW - converts (2) VGA, (2) HDMI,
and (2) Composite to HD-SDI
u
Converts HDMI, VGA,
and Composite to
HD-SDI
u
Features HD-SDI loop
through
u
Output controlled by
an external switch
Specifications
Interface
DO-160 TESTED
Dimensions
8.890”(W) x 5.830”(H) x 2.020” (D)
Weight
1 lbs 10 oz
Operating Temperature
-20° C to 60° C
Control
Momentary Ground
Power
28V DC @ 1 Amps
PC Input
VGA (Analog RGB) - FDCONV-HDSDI-S
2 VGA (Analog RGB) - FDCONV-HDSDI-D
Video Input
FDCONV-HDSDI-S: HDMI, HD-SDI, and Composite
FDCONV-HDSDI-D2: HDMI, 2 HD-SDI, and 2 Composite
6435 Shiloh Road
Alpharetta, Georgia 30005
678.867.6717 phone
678.607.6432 fax
www.FlightDisplay.com
© 2015 Flight Display Systems
01/29/2015
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement