- No category
advertisement
KDS-50A3000
KDS-55A3000
KDS-60A3000
Quick Setup Guide
3-212-543-11(1)
For further information, see the Operating Instruction Manual supplied with the TV.
Please retain this guide for your future reference.
1
Your New
BRAVIA
™
SXRD Projection HDTV
Congratulations! Your new BRAVIA™ TV opens the door to the “Full HD Experience”.
This guide will explain how to get the most from your new High Definition TV.
Learn more. Visit the Sony HDTV Learning Center www.sony.com/HDTV
Please take these steps before you power up your BRAVIA™:
■
Register online at: www.sony.com/registration (from U.S.A.) www.SonyStyle.ca/registration (from Canada)
Make sure you’ve removed all accessory contents from packaging.
Install 2 AA batteries (supplied separately) in your remote control.
Give your TV 4 inches (10 cm) of space on both sides to properly ventilate.
The Four Steps to a Full HD Experience: Set, Sound, Source, and Setup
Along with your BRAVIA™ TV set, a complete HD system requires an HD sound system, a
source of HD content, and proper setup connection with components such as your HD cable or satellite box.
You must get HD programming to experience the full detail of HDTV.
The quality of the image you see on your BRAVIA™ can only be as high as the quality of the signal it is displaying. This chart shows the different signal types and how to access them.
Best Signal
Performance
High Definition
Content
Digital Content
Analog Content
Comments
Best picture quality 16:9 aspect ratio
Good picture quality aspect ratio based on program
Original TV format 4:3 aspect ratio
Sources
HD Over-The-Air Antenna
HD Cable Subscription/
Programming
HD Satellite Subscription
Over-The-Air Antenna
Digital Cable Subscription
Digital Satellite
Subscription
Over-The-Air Antenna
Cable Subscription
Contact your cable or satellite provider to upgrade your service to HD. Receive over-the-air
HD broadcasts with an HD-quality antenna (www.antennaweb.org) and discover the wealth of entertainment now available on super-high-resolution Blu-ray Disc™.
For Your Convenience
Please contact Sony directly if you have questions on the use of your television after reading your Quick Setup Guide and Operating Instruction Manual.
Contact Sony Customer Support at: http://www.sony.com/tvsupport
Or to speak with a support representative:
United States Canada
1-800-222-SONY (7669) 1-877-899-SONY (7669)
Please Do Not Return the Product to the Store
©2007 Sony Corporation Printed in U.S.A.
3
Running Initial Setup
Initial Setup instructions are displayed on the screen when your BRAVIA™ is powered on for the first time.
1
Select the language for the OSD (on-screen display).
Step 1 of 5
Initial Setup
Please select a language. Language settings will apply to on screen display as well as default audio for digital channels. Highlight a choice and press to continue.
English
Español
Français
2
Connect either Antenna or Cable to your TV.
Step 2 of 5
Initial Setup
Auto Program allows the TV to tune channels directly from your cable or antenna feed. If you are using only a cable or satellite set top box, it is not necessary to run Auto Program. In this case, choose “Skip”. Auto Program may take 30+ minutes to complete.
Select Auto Program to advance to the
Auto Programming.
Auto Program
Skip
VHF/UHF/CABLE
If you are not using the VHF/UHF/CABLE connection to TV, you can cancel the Auto
Program by selecting the Skip option.
3
Your TV will detect the type of signal connected and will start scanning for the channels.
Initial Setup Step 3 of 5
Please allow 30+ minutes to complete.
Pressing or will cancel auto program.
Channels Found
Analog:
Digital:
58
0
Searching...
To Access Initial Setup by Remote Control
If you did not follow the Initial Setup screen the first time, press HOME on your remote
Settings category.
1
XMB™ appears.
HDMI Settings
General
1.2.3
2
Select Initial Setup icon.
Settings
1.2.3
Start Initial Setup now?
Some channels may be overwritten.
Yes No
TV
4
Follow on-screen instructions to complete setup and begin viewing your TV.
Step 5 of 5
Initial Setup
Select “ OK ” to use your TV
OK
To Do List
When the Initial Setup is completed, consider carrying out these items:
Set Clock
Set Closed Captions (CC)
Set Parental Lock
Show/Hide Channels
Label Inputs (skip inputs)
Speakers On/Off
For details, refer to your BRAVIA™ Operating Instruction Manual.
2
Connecting Your TV
Your BRAVIA™ TV must be properly connected to components such as sound system and cable or satellite box.
See reverse side of this guide for sample connection diagrams.
Turn off and unplug all components before making connections.
Do not turn on the TV until connection setup is completed.
Audio/Video
Performance
Input
Connector
HDMI 1
HDMI 2
HDMI 3
Component 1
Component 2
Video Connection
HDMI connection*
Audio Connection
HDMI cable carries both video and audio signals.
Separate audio cable is not needed.
(*When HDMI is connected to DVI with an adapter, a separate audio L/R is necessary.)
High or Standard Definition Quality
1080/24p, 1080p, 1080i, 720p, 480p, 480i, PC
(Compatible with HD or SD content)
1080p, 1080i, 720p, 480p, 480i
(Compatible with HD or SD content)
Audio L/R Component connection
Video 1
Audio L/R S VIDEO connection
(Use this connector in place of composite video connector) 480i
(SD content)
Video 1
Video 2
Video 3
Composite video connection
(Shown with video and audio connectors)
4
Watching Your TV
Select Your Content Source
Whether you are watching cable, satellite or broadcast TV; playing a VCR, DVD or Blu-ray
Disc™; or connecting to your PC, you need to choose the correct input using your remote
■
■
Press HOME on your remote control to display on-screen the TV mode or External
Inputs selection menu; OR
Press INPUT repeatedly until your selection is highlighted on-screen.
Adjust Screen Shape and Aspect Ratio
High Definition and Standard Definition signals are transmitted with different aspect ratios
(the width-to-height shape of the image). Most HD signals use a widescreen aspect ratio of
16:9. Most SD signals use a boxy 4:3 aspect ratio. The 16:9 aspect ratio looks perfect on your
BRAVIA™, but a 4:3 image must be adjusted to look right. You can:
■
■
■
■
Adjust your TV so boxy 4:3 images are automatically re-configured (zoomed or stretched) to fit the wide TV screen; OR
Watch SD content in its original, boxy format with wide black bars surrounding the image to fill in unused space (for example, you may prefer to watch an old classic movie in its original 4:3 format, not reconfigured for a wide screen).
Press WIDE on your remote control to display the Wide Mode setting of your preference.
Visit www.learningcenter.sony.us/HomeAudioandVideo/Televisions/Research1/TheBasicsofDTV for more information.
Customize Sound and Picture Quality
You can choose optimum sound and picture settings to match the content you are displaying on your TV:
■
■
■
Press HOME on your remote control and select Picture or Sound. Choose the appropriate setting for your content.
Use the OPTIONS button on your remote control to quickly adjust sound and picture quality.
Refer to your BRAVIA™ Operating Instruction Manual for more information.
To learn more about HDTV, visit www.sony.com/HDTV
Audio L/R
What is HDMI™?
HDMI (High-Definition Multimedia Interface) cables are the standard for connecting HDTV. They are built to properly handle high bandwidth, uncompressed video and multi-channel audio—all in one cable.
May require DVI-to-HDMI adapter and separate audio connector.
Connect PC’s audio output when using a Digital Video Interface (DVI) or HD15 connection.
Press PC’s FUNCTION Key + Select Output to transmit to TV.
When using an HD15 connection, adjust TV’s Pitch and Phase to correct sharpness.
Refer to your BRAVIA™ Operating Instruction Manual for more information.
Connect with an HDMI cable when using an HDMI compatible PC.
To learn more about HDTV, visit www.sony.com/HDTV
WIDE
INPUT
OPTIONS
HOME
Product Support
Clock/Timers
Sound
Screen
Video Options channels from here or use the 0-9 number buttons on your remote control.
7
8
Cable 8.1
KFMB-DT
9
10
10.1
11
Select connected device from here or use the INPUT button on your remote control.
Video2
Video3
Component2
HDMI1
HDMI2
TV
TV
TV
KDS-50/55/60A3000 3-212-543-11(1)
HD Basic Connection
Cable/Antenna
Splitter
Side of TV
VHF/UHF/CABLE
S VIDEO 1
DMe x /
SERVICE
VIDEO IN
2 3
COMPONENT IN
(1080p/1080i/720p/480p/480i)
1
Y
2
VIDEO
(MONO)
L
AUDIO
R
L
AUDIO
R
P B
P
R
L R
DIGITAL OUT
(OPTICAL)
AUDIO OUT
(VAR/FIX)
AUDIO
RGB
1
L
AUDIO
R
2
PC IN
HD Cable Box or HD Satellite
Receiver
3
Blu-ray Disc™/DVD
HD Basic Connection with A/V Receiver
Cable/Antenna
Splitter
Side of TV
VHF/UHF/CABLE
S VIDEO 1
DMe x /
SERVICE
VIDEO IN
2 3
COMPONENT IN
(1080p/1080i/720p/480p/480i)
1
Y
2
VIDEO
(MONO)
L
AUDIO
R
L
AUDIO
R
P B
P
R
L R
DIGITAL OUT
(OPTICAL)
AUDIO OUT
(VAR/FIX)
AUDIO
RGB
1
L
AUDIO
R
2
PC IN
3
SAT
(dish)
Blu-ray Disc™/DVD
A/V Receiver
HD Basic Connection with Home Theater System
HD Antenna
Side of TV
VHF/UHF/CABLE
S VIDEO 1
DMe x /
SERVICE
VIDEO IN
2 3
COMPONENT IN
(1080p/1080i/720p/480p/480i)
1
Y
2
VIDEO
P
B
P
R
(MONO)
L
AUDIO
R
L
AUDIO
R
L R
DIGITAL OUT
(OPTICAL)
AUDIO OUT
(VAR/FIX)
AUDIO
RGB
1
L
AUDIO
R
2
PC IN
3
Blu-ray Disc™/DVD
Or
Cable/SAT
(dish)
SD Cable Box or
SD Satellite Receiver
Home Theater System
SAT (dish)
HD Cable Box or HD Satellite Receiver
Coaxial
HDMI
HD15
VCR
VCR/DVD Combo
Required Cable Types for Connection
DVI-to-HDMI Composite
Component
Audio (L/R)
Basic Connection with SD VCR/DVD
Cable/Antenna
Splitter
Side of TV
VHF/UHF/CABLE
S VIDEO 1
DMe x /
SERVICE
VIDEO IN
2 3
COMPONENT IN
(1080p/1080i/720p/480p/480i)
1
Y
2
P
B
VIDEO
P
R
(MONO)
L
AUDIO
R
L
AUDIO
R
L R
DIGITAL OUT
(OPTICAL)
AUDIO OUT
(VAR/FIX)
AUDIO
RGB
1
L
AUDIO
R
2
PC IN
3
DVD
Mini-Pin Audio
Audio (L/R) with Mini-Pin
Digital Optical Audio
SAT
(dish)
PC Connection
Cable/Antenna
Splitter
Side of TV
VHF/UHF/CABLE
S VIDEO 1
DMe x /
SERVICE
VIDEO IN
2 3
COMPONENT IN
(1080p/1080i/720p/480p/480i)
1
Y
2
P
B
VIDEO
(MONO)
L
AUDIO
R
P R
L
AUDIO
R
L R
DIGITAL OUT
(OPTICAL)
AUDIO OUT
(VAR/FIX)
AUDIO
RGB
1
L
AUDIO
R
2
PC IN
3
PC
HD Cable Box or
HD Satellite Receiver
■
■
Notes on Connection:
Your TV is equipped with three HDMI inputs, connect your incoming signal source (HD Cable Box, HD Satellite Receiver, or DVD) with an HDMI or component video for the best possible picture quality.
If your connecting equipment has DVI output instead of the HDMI output, you must use DVI-to-HDMI cable for the video and also connect an audio cable for the sound. If this is the case, connect the cable to HDMI IN 1 (input) of your TV.
When receiving High-Definition content signal by over-the-air antenna, it is best to use the HD antenna.
When using a DVI-to-HDMI cable, make sure to connect the DVI side first.
Notebook PC
Programming the Remote Control
Your remote control can be programmed to use other equipment. The remote control is preset as shown below for Sony equipment.
2
3
2
4
Sony Equipment
BD
DVD
STB
Programmable Code Number
101 (Sony Blu-ray Disc Player)
751 (Sony DVD Player)
801 (Sony Satellite Receiver)
Programming Non-Sony Video Equipment
Follow the steps below to program your TV’s remote control.
1
In the space provided below, write down the three-digit code of your equipment found on the Manufacturer’s Codes List (see Operating Instructions).
If more than one code is listed, try entering the code listed first.
Code No. ______________
2
Press and hold , or and simultaneously to light the FUNCTION button.
3
Enter the three-digit code using - while the selected button is lit. If the code is not entered within 10 seconds, you must repeat step 2.
4
Press while the FUNCTION button is lit.
The selected FUNCTION button will blink twice if your equipment is programmed correctly and five times if it is not.
To Confirm the Programming
If you can turn on and off the equipment by pressing the green button, then the programming is complete. If you can’t, try the next code listed.
■
■
In some cases, you may not be able to program your remote control. If this is the case, use your equipment’s own remote control.
Any one of the FUNCTION buttons can be programmed to operate other equipment regardless of the labeling. For example, if programmed with the correct code, can operate DVD/VCR combo equipment. This is useful if your equipment does not match the labeled buttons available. Make note of your equipment’s programmed button.
KDS-50/55/60A3000 3-212-543-11(1)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project