DS9400 Fire Alarm Control Panels
DS9400
Fire Alarm Control Panels
Smoke Detector Compatibility List
The following is a list of 2-wire smoke detectors that have proven to be compatible with the DS9400 Series Fire Alarm Control/Communicators
under the method required by Underwriters Laboratories.
The following list of 2-wire smoke detectors have also been proven to be compatible with the DS9400 Series when used with the DS9411
Class A Zone Converter under the method required by Underwriters Laboratories.
• 2-wire smoke detectors that are not listed as compatible should not be used with the DS9400 Series.
• When mixing different model number detectors manufactured by Detection Systems, a maximum of 20 detectors may be used per loop.
• 2-wire smoke detectors of different manufacturers or detectors of different model numbers not manufactured by Detection Systems may not
be mixed on the same circuit.
Manufacturer
Detector
Model
Detector
Identifier
Mounting Base Model
Base
Identifier
Detectors
per Point
Detection Systems
DS230/230F/DS233F
A or B
MB2W or MB2WL
A
20
Detection Systems
DS250/DS250TH
A or B
MB2W or MB2WL
A
20
Detection Systems
DS260
A or B
MB2W or MB2WL
A
20
Detection Systems
DS282/DS282TH
B
N/A
N/A
20
Detection Systems
DS282S/D282THS
B
N/A
N/A
20
Detection Systems
DS290
A or B
N/A
N/A
20
Bosch Security Systems
F220-P/F220-PTH/F220-PC/F220-PTHC*
A
F220-B6
A
20
Bosch Security Systems
F220-135/F220-135F/F220-190F*
A
F220-B6
A
20
Radionics
D263/D263TH
B
N/A
N/A
20
Radionics
D263S/D263THS
B
N/A
N/A
20
Radionics
D285/D285TH
A or B
D287 or D288
A
20
Radionics
D286
A or B
D287 or D288
A
20
20
Radionics
D340
A or B
N/A
N/A
Radionics
D603/D604/D605
A or B
D287 or D288
A
20
Electro Signal Lab
429C
S10A
N/A
N/A
20
Electro Signal Lab
429CRT
S11A
N/A
N/A
20
Electro Signal Lab
429CST
S11A
N/A
N/A
20
Electro Signal Lab
429CT
S10A
N/A
N/A
20
Electro Signal Lab
521BXT/528BXT
S10A
N/A
N/A
20
Electro Signal Lab
521CRXT/528CRXT
S10A
N/A
N/A
20
Electro Signal Lab
521B/528B
S10A
N/A
N/A
20
Electro Signal Lab
711U
S10A
701E, 701U, 702E, 702U
S00
20
Electro Signal Lab
712U
S10A
701E, 701U, 702E, 702U
S00
20
Electro Signal Lab
713-5U
S10A
701E, 701U, 702E, 702U
S00
20
Electro Signal Lab
713-6U
S10A
701E, 701U, 702E, 702U
S00
20
Electro Signal Lab
721U
S10A
702E, 702U
S00
20
Electro Signal Lab
721UT
S10A
702E, 702U
S00
20
Electro Signal Lab
722U
S10A
702E, 702U
S00
20
Electro Signal Lab
731U
S11A
702E, 702U, 702RE, 702RU
S00
20
Electro Signal Lab
732U
S11A
702E, 702U, 702RE, 702RU
S00
20
System Sensor
1100
A
N/A
N/A
20
System Sensor
1151
A
B110LP
A
20
System Sensor
1451
A
B401B
A
20
System Sensor
2100
A
N/A
N/A
20
System Sensor
2151
A
B110LP
A
20
System Sensor
2400
A
N/A
N/A
20
System Sensor
2451
A
B401B
A
20
System Sensor
2100T
A
N/A
N/A
20
System Sensor
2400TH
A
N/A
N/A
20
System Sensor
2451TH
A
B401B
A
20
System Sensor
2100S/2100TS
A
N/A
N/A
20
®
* Compatible with CleanMe .
Disclaimer Notice: Detection Systems, Inc. makes no claim either written, oral, or implied that any smoke detectors, other than the ones
listed here, will work with the DS9400 Series Fire Alarm Control/Communicators.
The following is a list of 4-wire smoke detectors that have proven to be compatible with the DS9400 Series Fire Alarm Control/Communicators
under the method required by Underwriters Laboratories.
• 4-wire smoke detectors that are not listed as compatible should not be used with the DS9400 Series.
• 4-wire smoke detectors of different manufacturers or detectors of different model numbers not manufactured by Detection Systems may not
be mixed on the same circuit.
Manufacturer
Detector
Model
Mounting Base Model
Detection Systems
DS230/DS230F/DS233F
MB4W, MB4WA, MB4WE, MB4WS
Detection Systems
DS240
N/A
Detection Systems
DS250/DS250TH
MB4W, MB4WA, MB4WE, MB4WS
Detection Systems
DS260
MB4W, MB4WA, MB4WE, MB4WS
Detection Systems
DS284/DS284TH
N/A
Detection Systems
DS291/DS292
N/A
Bosch Security Systems
F220-P/F220-PTH/F220-PC/F220-PTHC*
F220-B6C/F220-B6R/F220-B6E/F220-B6RS
Bosch Security Systems
F220-135/F220-135F/F220-190F*
F220-B6C/F220-B6R/F220-B6E/F220-B6RS
Radionics
D254/D255
D290
Radionics
D273/D273TH
N/A
Radionics
D281A
D290
Radionics
D282A
D290
Radionics
D283A
D290
Radionics
D285/D285TH
D292, D293A, D293E, D293S
Radionics
D286
D292, D293A, D293E, D293S
Radionics
D294
N/A
Radionics
D295
N/A
Radionics
D296
N/A
Radionics
D299
N/A
Radionics
D341/D342
N/A
Radionics
D603/D604/D605
D292, D293A, D293E, D293S
Electro Signal Lab
541C/548C
N/A
Electro Signal Lab
541CXT/548CXT
N/A
Electro Signal Lab
541AXT/548AXT
N/A
Electro Signal Lab
449CLT
N/A
Electro Signal Lab
741U
N/A
Electro Signal Lab
741UT
N/A
Electro Signal Lab
742U
N/A
System Sensor
6424 Beam
N/A
System Sensor
DH-400ACDC
N/A
* Compatible with CleanMe®.
Disclaimer Notice: Detection Systems, Inc. makes no claim either written, oral, or implied that any smoke detectors, other than the ones
listed here, will work with the DS9400 Series Fire Alarm Control/Communicators.
© 2003 Detection Systems, Inc.
130 Perinton Parkway, Fairport, New York, USA 14450-9199
(585) 223-4060 • (888) 289-0096 • (585) 223-9180
31142K
Smoke Detector Compatibility List
11/03
DS9400
Page 2 of 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising