Owner`s Manual - English

Owner`s Manual - English
Features .................................................................................................................................... 1
Read this Before Installation ..................................................................................................... 2
FCC Statement .......................................................................................................................... 2
The FCC Wants You to Know .................................................................................................... 2
Lightning .................................................................................................................................... 2
Mounting the Phone .................................................................................................................. 3
On a Desk ................................................................................................................................. 3
On a Wall Plate or Wall ............................................................................................................. 3
Connecting, Charging, and Replacing The Battery Pack .......................................................... 4
A Quick Look at the Handset ..................................................................................................... 6
Setting the Ringers .................................................................................................................... 7
Setting the Dialing Mode ........................................................................................................... 7
Making and Receiving Calls ...................................................................................................... 7
Adjusting the 3-Band Equalizer ................................................................................................. 7
Using Tone Services on a Pulse Line ........................................................................................ 8
Using Page ................................................................................................................................ 8
Memory Dialing ......................................................................................................................... 8
Storing a Number in Memory .................................................................................................... 8
Dialing a Memory Number ......................................................................................................... 9
Entering a Pause in a Memory Number .................................................................................... 9
Chain Dialing Service Numbers ................................................................................................ 9
Testing Stored Emergency Numbers ......................................................................................... 9
Troubleshooting ....................................................................................................................... 10
Care ......................................................................................................................................... 11
900 MHz Big Button Cordless Telephone with
Lighted Keypad and 3-Band Equalizer
OWNER’S MANUAL — Please read before using this equipment.
FEATURES
Your RadioShack 900Mhz Big Button Cordless Telephone offers the latest advances in
cordless phone technology including a space
saving design. Its headset jack lets you connect an optional headset (available at your
local RadioShack store) for hands-free convenience while you use the phone.
Your phone includes these additional features:
10-Channel Auto Scan — automatically selects a clear channel when you make or answer a call.
Page — lets you send a paging signal from
the base to the handset to help locate a misplaced handset or page someone at the
handset.
WARNING: To reduce the risk of fire or
shock hazard, do not expose this product to rain
or moisture.
3-Emergency and 10-Memory Speed Dial
— stores up to 3 emergency numbers and 10
frequently called numbers for easy dialing.
Incoming Call and Battery Indicator — the
antenna’s built-in indicator lights when the
phone is in use, when you have an incoming
call (even when the ringer is off), and when
the battery is low.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
3-Band Equalizer/Tone Control — lets you
control the frequency and volume of the
sound you hear through the handset.
This symbol is intended to alert
you to the presence of uninsulated dangerous voltage within
the product’s enclosure that might
be of sufficient magnitude to constitute a risk of electric shock. Do
not open the product’s case.
Lighted Handset Keypad — lights when
you press any key or receive a call, making
the phone easy to use, even in total darkness.
Ample Talk and Standby Time —
when fully charged (about 12 hours), the
supplied battery provides about 7 hours
(when the equalizer is off) or 5 hours (when
the equalizer is on) of talk time or 7 days of
standby time.
Security Access-Protection Code — prevents other cordless phone users from using
your phone line.
!
!
This symbol is intended to inform
you that important operating and
maintenance instructions are
included in the literature accompanying this product.
Your phone is ETL listed to UL standards
and meets all applicable FCC standards.
© 2001 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by RadioShack Corporation.
READ THIS BEFORE
INSTALLATION
take the necessary steps to prevent interruption of your telephone service.
Each device that you connect to the phone
line draws power from the phone line. We refer to this power draw as the device’s ringer
equivalence number, or REN. The REN is on
the bottom of the base.
This equipment complies with the limits for a
Class B digital device as specified in Part 15
of the FCC Rules. These limits provide reasonable protection against radio and TV interference in a residential area. However, your
equipment might cause TV or radio interference even when it is operating properly. To
eliminate interference, you can try one or
more of the following corrective measures:
If you are using more than one phone or other
device on the line, add up all the RENs. If the
total is more than five (three in rural areas),
your phone might not ring. If ringer operation
is impaired, remove a device from the line.
• Reorient
antenna.
FCC STATEMENT
or
relocate
the
receiving
• Increase the distance between the equipment and the radio or TV.
This telephone complies with Part 68 of the
FCC Rules. You must, upon request, provide
the FCC registration number and the REN to
your phone company. These numbers are on
the bottom of the base.
• Use outlets on different electrical circuits
for the equipment and the radio or TV.
Consult your local RadioShack store if the
problem still exists.
Note: You must not connect your phone to
any of the following:
Warning: Changes or modifications to this
phone not expressly approved by the party responsible for compliance could void the user’s
authority to operate the phone.
• coin-operated systems
• party-line systems
LIGHTNING
• most electronic key phone systems
Your telephone has built-in lightning protection to reduce the risk of damage from surges
in telephone line and power line current. This
lightning protection meets or exceeds FCC requirement. However, lightning striking the
telephone or power lines can damage your
telephone.
THE FCC WANTS YOU TO
KNOW
In the unlikely event that your phone causes
problems on the phone line, the phone company can temporarily discontinue your service. If this happens, the phone company
attempts to notify you in advance. If advance
notice is not practical, the phone company notifies you as soon as possible and advises you
of your right to file a complaint with the FCC.
Lightning damage is not common. Nevertheless, if you live in an area that has severe
electrical storms, we suggest that you unplug
your phone when storms approach to reduce
the possibility of damage.
Also, the phone company can make changes
to its lines, equipment, operations, or procedures that could affect the operation of this
telephone. The telephone company notifies
you of these changes in advances, so you can
2
MOUNTING THE PHONE
that does not meet these specifications
could damage the phone or the adapter.
Choosing a Location
• Always connect the AC adapter to the
phone before you connect it to AC power.
When you finish, disconnect the adapter
from AC power before you disconnect it
from the phone.
You can place the phone on a desk or table,
or mount it on a standard wall plate or directly
on a wall.
Select a location that is:
On a Desk
• near an easily accessible AC outlet
Follow these steps to place the base on a
desk or table using the supplied bracket.
• near a telephone line jack
• out of the way of normal activities
1. Insert the bracket’s tabs into the base’s
upper tab slots in the direction
of DESKTOP marked on the bracket, then
press down on the bracket’s clips and
insert them into the clip slots.
• away from electrical machinery, electrical
appliances, metal walls, filing cabinets,
wireless intercoms, security alarms, and
room monitors
2. Plug one end of the supplied modular
cord into the TEL LINE jack on the back of
the base.
The base’s location affects the phone’s range.
If you have a choice of several locations, try
each to see which provides the best performance.
3. Plug the modular cord’s other end into a
modular phone line jack.
Notes:
4. Insert the supplied AC adapter’s barrel
plug into the DC 12V 200mA jack on the
back of the base.
• Your telephone connects directly to a
modular telephone line jack. If your
phone line jack is not a modular jack, you
can update the wiring yourself, using
jacks and adapters available at your local
RadioShack store. Or, you can let the
phone company update the wiring for
you.
5. Route the adapter’s cord through the
strain relief slot on the bracket.
6. Plug the adapter into a standard AC outlet.
• The USOC number of the jack to be
installed is RJ11C or RJ11W.
7. Lift the base’s antenna to a vertical position.
Use the supplied 12V, 200 mA AC/DC adapter to power the phone.
On a Wall Plate or Wall
1. Insert the supplied bracket’s tabs into the
base’s lower tab slots in the direction of
WALL MOUNT marked on the bracket,
then press down on the bracket’s clips
and insert them into the clip slots.
Cautions:
You must use a Class 2 power
source that supplies 12V DC
and delivers at least 200 mA.
Its center tip must be set to positive and
its plug must fit the phone's DC 12V
200mA jack. The supplied adapter meets
these specifications. Using an adapter
!
2. Plug one end of the supplied short modular cord into the TEL LINE jack on the
back of the base.
3
3. Insert the supplied AC adapter’s barrel
plug into the DC 12V 200mA jack on the
back of the base.
4. Route the adapter’s cord through the narrow groove on the bottom of the bracket.
5. Plug the modular cord into the wall plate
jack, then align the bracket’s keyhole
slots with the wall plate studs and slide
the base downward to secure it.
CONNECTING, CHARGING,
AND REPLACING THE
BATTERY PACK
6. Plug the adapter into a standard AC outlet.
7. Press and lift out the handset holder, turn
it over and upside down so its tabbed
edge faces up, then slide it back down
into its slot.
The phone comes with a rechargeable nickelcadmium battery pack. You must connect the
battery pack and charge it for at least 12
hours before you use the phone for the first
time.
8. Lift the base’s antenna to a vertical position.
1. Press down and slide off the battery pack
compartment cover.
Note: To mount the phone directly on a wall,
you need two screws (not supplied) with
heads that fit into the keyhole slots on the bottom of the base. Follow the steps under “On a
Wall Plate or Wall” on Page 3, then apply
these additional instructions.
1. Drill two holes 3 15/16
inches (100 mm) apart.
Then thread a screw
into each hole, letting
the heads extend about
5/16 inch (8 mm) from
the wall.
2. Unfasten the retainer strap and lift the
battery pack out of the compartment.
3. Plug the battery pack’s connector into the
socket in the compartment (the connector
fits only one way), then replace the battery pack and fasten the retainer strap.
/16 "
5
4. Replace the cover.
To charge the battery pack, place the handset
facedown or face up on the base. The
CHARGE/IN USE indicator lights.
3 15/16“
2. Plug one end of the
supplied long modular
cord into the TEL LINE
jack on the back of the
base.
Notes:
• Recharge the battery pack if the handset
beeps twice every 7 seconds and the
indicator in the handset’s antenna flashes
while you are using the phone. Or, if the
indicator in the handset’s antenna flashes
when the phone is not in use.
3. Align the keyhole slots with the mounting
screws and slide the base downward to
secure it.
4
• When you first use the phone after charging or recharging the battery pack, the
phone might not work. Return the handset to the base for about 5 seconds to
reset the security access-protection code.
store. Install the new battery pack, place the
handset on the base, and charge the battery
for 12 hours before using it.
Note: To avoid losing numbers stored in
memory, you must install and begin charging
the new battery pack within 2 minutes of removing the old one.
• About once a month, fully discharge the
battery pack by keeping the phone off the
base until the indicator in the antenna
flashes slowly and the handset beeps
twice every 7 seconds when the phone is
in use. (When the phone is not in use, the
indicator in the antenna flashes slowly.)
Otherwise, the battery pack loses its ability to fully recharge.
Warning: Dispose of the old battery pack
promptly and properly. Do not burn or bury it.
Cautions:
• You must use a replacement battery pack
of the same size and type.
• If the CHARGE/IN USE indicator does
not light when you place the handset on
the base, be sure the AC adapter is correctly and securely connected. Also,
check the charging contacts on the handset and base. If the contacts are dirty or
tarnished, clean them with a pencil
eraser.
• Do not dispose of the battery pack in a
fire because it might explode.
• Do not open or mutilate the battery pack.
• Be careful not to short the battery pack by
touching the connector’s pins with conducting materials, such as rings, bracelets, and keys. The battery pack or
conductor might overheat and burn.
• When the handset is on the base, the
CHARGE/IN USE indicator lights even
when the battery pack is not connected. If
your phone does not work, be sure the
battery pack is properly connected.
If you have trouble replacing the battery pack,
take the phone to your local RadioShack store
for assistance.
• If the battery pack becomes completely
discharged or the base loses power while
the handset is away from it, place the
handset on the base for about 5 seconds
to reset the security access-protection
code. If the handset loses power, leave it
on the base to charge the battery pack.
Important: The EPA certified
RBRC® Battery Recycling Seal
on the nickel-cadmium (Ni-Cd)
battery indicates RadioShack is
voluntarily participating in an industry program to collect and recycle these
batteries at the end of their useful life, when
taken out of service in the United States or
Canada. The RBRC program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste
stream, which may be illegal in your area.
Please call 1-800-THE-SHACK (1-800-8437422) for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. RadioShack’s involvement in this program
is part of the company’s commitment to preserving our environment and conserving our
natural resources.
• If you will not use your phone for a long
time, disconnect its battery pack. This
helps increase the battery pack’s life.
The supplied battery pack should last about a
year. If the battery pack does not hold a
charge for more than 2 hours after an overnight charge, replace it with a new 3.6V, 600
mAh NiCd rechargeable battery pack with a
connector that fits the socket in the battery
compartment. You can order a replacement
battery pack through your local RadioShack
5
A QUICK LOOK AT THE HANDSET
Incoming Call and
Battery Indicator
Use an optional headset for handsfree
convenience. Insert the 3/32-inch plug into
the headset jack to make or answer calls.
Press the desired Emergency
Memory Icon to dial a stored
emergency number (see “Dialing
a Memory Number” on Page 9).
Use TALK to make,
answer, or end a
call (see “Making
and Receiving
Calls” on Page 7).
Press CH during a call to
change the phone’s channel
and eliminate interference. The
phone automatically selects a
clear channel when you press
TALK.
Press MEM to store or recall numbers in memory (see “Memory Dialing” on Page 8).
∗/
TONE to use your phone
Press
company’s special tone services
when you are on a pulse line (see
“Using Tone Services on a Pulse
Line” on Page 8).
Press REDIAL/PAUSE to redial the
last number dialed, redial a number
that is busy without hanging up, or
enter a pause in a memory number.
The redial memory also stores tone
and pause entries (see “Entering a
Pause in a Memory Number” on
Page 9 and “Using Tone Services on a
Pulse Line” on Page 8).
Use FLASH for special phone services
such as Call Waiting. If you have Call
Waiting, press FLASH to answer an incoming call without disconnecting the
current call. If you do not have Call
Waiting, pressing FLASH might disconnect your current call.
Press EQ LOUD to activate
the 3-Band Equalizer (see
“Adjusting the 3-Band Equalizer” on Page 7).
6
SETTING THE RINGERS
If the dial tone continues, you have pulse
service.
RINGER OFF/ON on the side of the handset
and RINGER ON/OFF on the back of the base
If you have tone service, leave TONE/PULSE
set to TONE. If you have pulse service, set
TONE/PULSE to PULSE.
control the handset and base ringers respectively. To have the handset and base ring
when a call comes in, set both ringers to ON
and leave the handset off the base. To turn
the ringers off, set RINGER to OFF.
To hang up, place the handset on the base or
press TALK.
When both ringers are set to OFF, the handset
and base do not ring, but you can still make
outgoing calls. If you hear an extension telephone ring, you can answer the incoming call
on this phone. The indicator in the handset’s
antenna and the CHARGE/IN USE indicator
on the base flash until you answer the call.
MAKING AND RECEIVING
CALLS
To make a call, lift the handset from the base,
then press TALK. You hear a dial tone, and
the base’s CHARGE/IN USE and the handset
antenna’s indicators light. Dial the desired
number.
Note: If you set both ringers to ON and the
handset is on the base, only the base rings
when a call comes in; the handset does not
ring. If the base ringer is set to OFF and the
handset is on the base with the handset ringer
ON, you will not hear the phone ring when
there is an incoming call.
To answer a call, lift the handset off the base,
then press TALK. The CHARGE/IN USE indicator on the base and the handset antenna’s
indicator light.
Notes:
• When you press a button, a single tone
indicates that the phone has accepted the
command. Three tones indicate that you
pressed a button in error or there is
severe interference. (See “A Quick Look
at the Handset” on Page 6).
SETTING THE DIALING
MODE
Set TONE/PULSE on the bottom of the base for
the type of service you have. If you are not
sure which type you have, do this simple test
after charging the battery pack.
• If interference is severe, the handset
might lose communication with the base
and the call might disconnect. If this happens, return the handset to the base for
about 5 seconds to reset the security
access-protection code.
1. Set TONE/PULSE to TONE.
2. Lift the handset from the base and press
TALK so the base’s CHARGE/IN USE
and the handset antenna’s indicators
light, then listen for a dial tone.
ADJUSTING THE 3-BAND
EQUALIZER
3. Press any number other than 0 and 1.
Note: If your phone system requires that
you dial an access code (9, for example)
before you dial an outside number, do not
press the access code either.
You can control the handset’s frequency and
volume by adjusting the 3-band (HI, MID, LOW
frequency) equalizer on the back of the handset. Press EQ OFF/ON on the side of the handset or EQ LOUD on the keypad to turn on the
equalizer. EQ LOUD lights when you press either EQ OFF/ON or EQ LOUD to indicate the
If the dial tone stops, you have touchtone service.
7
MEMORY DIALING
equalizer is on. Adjust the 3-band equalizer
located on the back of the handset to the desired level. Slide the bands toward MAX to increase the sound, or towards MIN to decrease
the sound level within each range. When you
finish, press EQ OFF/ON or EQ LOUD to turn
the equalizer off. EQ LOUD turns off.
You can store up to 3 direct emergency numbers and 10 indirect memory numbers of 16
digits each in the phone’s memory.
Notes:
• To keep your accounts secure, we recommend you do not store your personal
access code for services such as bank by
phone in a memory location.
Notes:
• The equalizer resets to the normal level
whenever you hang up the handset.
• When storing numbers for special services (such as alternate long-distance or
bank by phone), store the service’s main
phone number in one memory location
and numbers for additional information in
other locations.
• You can adjust the frequency and volume
only when the equalizer is turned on.
USING TONE SERVICES ON
A PULSE LINE
Some special services, such as bank by
phone, require tone signals. If you have pulse
service, you can still use these tone services
by following these steps:
Storing a Number in Memory
1. Press MEM. The handset antenna’s indicator flashes.
1. Dial the service’s main number.
2. Dial the desired number (up to 16 digits).
2. When the service answers, press TONE/
∗. Any additional numbers you dial are
sent as tone signals.
3. Press MEM again.
4. Press a memory location number (1–0) or
one of the three emergency icons to store
the number. The handset sounds two
long beeps.
3. After you complete the call, press TALK or
return the handset to the base. The
phone automatically resets to pulse dialing.
Note: If you hear three short beeps, you
did not store the number successfully or
you entered more than 16 digits. Start
again from step 1.
USING PAGE
You can send a page to the handset to locate
it when it is away from the base and not in
use. To page the handset, press PAGE on the
base. The handset beeps for about 15 seconds. To find the handset, press and hold
PAGE. The handset beeps for about 1 minute.
Press any key on the handset or PAGE on the
base to silence it sooner.
Pull the memory label out from the right side
of the base and write the name in the respective memory location number on the memory
label.
Notes:
• The handset beeps twice every 7 seconds and the indicator in the antenna
flashes slowly while the phone is in use.
When the phone is not in use, the indicator in the antenna flashes slowly. If this
8
Chain Dialing Service Numbers
happens, recharge the battery within 2
minutes, or the numbers stored in memory will be lost.
To quickly recall special services numbers
(such as alternate long distance or bank by
phone), store each group of numbers in its
own memory location. When calling special
services, dial the service’s main number first.
Then, at the appropriate place in call, press
MEM, then the number for the location where
the additional numbers are stored.
• If you receive a call while you are storing
a number in memory, press TALK to
answer the call. After the call, begin again
at step 1.
• To change a number stored in memory,
simply store a new number in that memory location.
Note: If you use pulse dialing, be sure you
have stored a tone entry in another memory
location (see “Using Tone Services on a Pulse
Line” on Page 8).
Dialing a Memory Number
To dial a direct emergency number, press
TALK. When you hear the dial tone, press the
desired emergency icon. The phone dials the
number.
Testing Stored
Emergency Numbers
If you store an emergency service’s number
(police department, fire department, or ambulance, for example) and you want to test the
stored number, make the test call during the
late evening or early morning to avoid peak
demand periods. Remain on the line to explain the reason for your call.
To dial an indirect memory number, press
TALK. When you hear a dial tone, press MEM
then the memory location number (1–0). The
phone dials the number.
Entering a Pause in
a Memory Number
In some telephone systems, you must dial an
access code (9, for example) and wait for a
second dial tone before you can dial an outside number. You can store the access code
with the phone number. However, if you do,
you should also store a pause after the access code to allow the outside line time to
connect. After entering the access code,
press REDIAL to enter a 2-second pause.
9
TROUBLESHOOTING
We do not expect you have any problem with your telephone, but if you do, these suggestions
might help.
Problem
The handset does not work.
Suggestion
Move the handset closer to the base.
Raise the base’s antenna to a vertical position.
Make sure the phone’s modular cord and the AC adapter are correctly
and securely connected.
Recharge the handset’s battery pack.
Return the handset to the base for about 5 seconds to reset the security
access-protection code.
Make sure the handset’s battery pack is connected and charged.
The call is noisy.
Keep the handset and the base away from interference sources such as
computers, remote control toys, wireless alarm systems, wireless intercoms and room monitors, fluorescent lights, and electrical appliances. If
the interference is severe, turn off the interfering device.
Move the handset closer to the base.
Hang up and redial the number.
Press CH to change the channel.
The range decreases.
Recharge the handset’s battery pack.
The handset battery pack does
not charge.
Check the charging contacts on the handset and base. If they are dirty,
clean them with a pencil eraser.
Be sure the battery pack is connected correctly.
Be sure the handset is properly seated on the base.
Replace the battery pack (see “Connecting, Charging, and Replacing
The Battery Pack” on Page 4).
You can receive calls, but you
cannot make calls.
Set TONE/PULSE correctly for the type of service you have (see “Setting
the Dialing Mode” on Page 7).
You cannot adjust the 3-band
equalizer.
Be sure the equalizer is turned on (see “Adjusting the 3-Band Equalizer”
on Page 7).
If you still have problems, disconnect the phone. If other phones on the same line work properly,
the fault is in this phone or its installation. If you cannot find the problem, take the phone to your
local RadioShack store for assistance.
10
CARE
Keep the phone dry; if it gets wet, wipe it dry
immediately. Use and store the phone only in
normal temperature environments. Handle the
phone carefully; do not drop it. Keep the
phone away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it looking new.
Modifying or tampering with the phone’s internal components can cause a malfunction and
might invalidate its warranty and void your
FCC authorization to operate it. If your phone
is not performing as it should, take it to your
local RadioShack store for assistance. If the
trouble is affecting the telephone lines, the
phone company can ask you to disconnect
your phone until you have resolved the problem.
11
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from RadioShack company-owned
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING
THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY
LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS
OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to
you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
We Service What We Sell
RadioShack Corporation
Fort Worth, Texas 76102
12/99
43-3506
02A01
Printed in China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement