Edelbrock - Mustangs Plus

Edelbrock - Mustangs Plus
Edelbrock
Performer RPM Pro-Flo® EFI System
Up to 450 HP from 1500 to 7000 rpm for Small-Block Fords
FOR NON-EMISSION ENGINES:
The new Pro-Flo®2 (second generation)
offers a complete fully-sequential EFI system with an all-new, powerful electronics
package that includes everything you need
to convert a carbureted engine to a modern
fuel injection system. Starting with a new
“flash-programmable” engine control unit
(ECU) powered by EFI Technology, a leader
in advanced electronic engine management
and monitoring systems, the Pro-Flo®
Gen-2 allows for more tuning features,
fully sequential injector firing and limitless
calibrations in a compact package. The
Pro-Flo® Gen-2 includes a new software
package with a graphic user interface that
is user-friendly with an updated look. Additional software features include choice of
Edelbrock exclusive hand-held calibration
module (for tuning without a laptop) and new
for Pro-Flo® Gen-2 has the option to laptop
tune also, giving you the best of both worlds!
Two tuning strategies include speed density
(engine speed vs. manifold absolute pressure) and alpha-N (engine speed vs. throttle
position). Included are base calibrations for
common AMC, Chevy, Ford, and Chrysler
applications. A narrow band O2 sensor is included and is also wide-band 02 compatible
(wide band O2 not included). The complete
package includes: intake manifold, throttle
body assembly, fuel rails, fuel injectors, all
sensors, wiring harness, ecu, hand-held
calibration module, software, brackets and
attaching hardware.
All
All
289, 302; 400+ HP;
1500-7000 RPM
....................... #11037
351; 400+ HP;
1500-7000 RPM
....................... #11038
#11037
$3,385.95
$3,424.95
Performer RPM Pro-Flo EFI Nitrous System
Designed for use with EDELBROCK PERFORMER RPM PRO-FLO EFI SYSTEMS using our
4V air valve, these Nitrous Systems include a 10-lb. capacity nitrous bottle (shipped empty),
nitrous and fuel solenoids, spray bar plate, aircraft quality steel braided hose, nitrous and
gasoline filters, jet selection, aircraft quality fittings and all necessary switches, brackets, and
hardware for a complete installation.
All
Performer RPM Pro Flo system, single stage 100-150 HP.
......................................................................................... #10962
$681.95
kit
SINGLE STAGE: 100-150 HP
(ADJUSTABLE)
228 EDELBROCK
www.mustangsplus.com
CALL TOLL FREE 1-800-999-4289
MUSTANGS PLUS
STEREOS 228
1964½ - ‘73
CATALOG
Edelbrock
Edelbrock Endurashine Carburetors
#12157
Now, Edelbrock engineers have taken a great carb and made it even better
with the exciting Edelbrock Thunder Series AVS! Designed and calibrated to
deliver optimum street performance in hundreds of applications, Edelbrock
Thunder Series AVS carbs are undeniably the most innovative and dependable street performance carburetors available today. Thunder Series AVS
carbs have outstanding features like the Qwik-Tune secondary air valve
and share all the performance advantages of the popular Edelbrock Performer Series. Features like a sturdy 2-piece body, no power valves to blow
for superior reliability and a design that’s simple to tune to your needs make
the Edelbrock AVS Thunder Series carburetors the best you can buy.
All
All
All
All
All
All
All
Edelbrock 500 cfm w/manual choke
requires special fuel line ............................. #12054
Edelbrock 650 cfm 289-302-351 electric choke
calibrated for optimal street performance
................................................................... #12157
Edelbrock 650 cfm 289-302-351 manual choke
calibrated for optimal street performance
................................................................... #12158
Edelbrock 500 cfm square flange, electric choke
................................................................... #13417
Edelbrock 500 cfm square flange , electric choke
(non-EGR) w/ Endurashine finish ............... #13418
Edelbrock 500cfm square flange, manual choke
(non-EGR)................................................... #13419
Edelbrock 500 cfm square flange, manual choke
(non-EGR) w/ Endurashine finish ............... #13420
#12141
MANUAL CHOKE
Designed and calibrated for optimum street performance in small-block
and some big-block engines. Match with a variety of manifolds that include
Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker
II and other brands of similar design. Includes both timed and full vacuum
ports for ignition advance. Electric choke #1478 can be added if needed.
Comes with: Metering Jets – Primary .100, Secondary .095; Metering Rods
– .070 x .047; Step-Up Spring – orange (5” Hg).
$349.95 ea
All
$359.95 ea
ELECTRIC CHOKE
Designed for small-block and small displacement big-block engines, these
carbs are recommended only for stock to Performer level applications. They
are not recommended for use on RPM or Torker II intake manifolds. Match
with an Edelbrock Performer or Performer EPS manifold and other brands
of similar design. Calibrated 2% leaner than #1405. Includes both timed and
full vacuum ports for ignition advance. Comes with: Metering Jets – Primary
.098, Secondary .095; Metering Rods – .075 x .047; Step-Up Spring – yellow (4” Hg).
$354.95 ea
$358.95 ea
$452.95 ea
$323.95 ea
All
$399.95 ea
Edelbrock Endurashine 600 cfm manual
choke calibrated for performance! .......... #12141
600 cfm w/electric choke calibrated for
2% leaner than manual choke ................ #12142
#11002
$439.95 ea
Performer® Manifolds
Square-Bore Carburetors
Performer Series Carburetor
#11001
$379.95 ea
(idle to 5500 pm)
#12159
Edelbrock square-bore carburetors complete the Edelbrock Power Package
System for a smooth running and great performing “no guesswork” parts
combination. Read below to find out about carburetion and how Edelbrock
carbs work. You’ll see specifically what our carburetors can do for your
engine’s performance and why the Performer square-bore carburetor has
been a hit among well-informed automotive enthusiasts since its introduction
in 1989.
All
Edelbrock 600 cfm Carb w/Electric Choke
Calibrated 2% beter than Manual Choke .... #11000 $299.95 ea
All
Edelbrock 600cfm Carb w/Manual Choke
(Electric Choke Can Be Added) .................. #11001 $289.95 ea
All
Edelbrock 500cfm Carb w/Electric Choke... #11002 $329.95 ea
All
Edelbrock 500 cfm Carb w/Manual Choke
(Electric Choke Can Be Added) .................. #11003 $299.95 ea
All
Edelbrock 750cfm Carb w/Manual Choke...
( Electric Choke Can Be Added) ................. #11004 $299.95 ea
All
Edelbrock 750 cfm w/ electric choke & calibrated
2% cleaner than manual carburetor ............ #12159 $338.95 ea
#11013
Performer manifolds are dual-plane, low-rise intake manifolds with a 180°
firing order and patented runner design that you won’t find in other brands.
This patented design greatly improves torque over a wide rpm range,
especially off-idle through the mid-range. Throttle response is excellent.
All
Performer 260, 289, 302 w/o EGR Intake Manifold;
Stock Replacement; 4BBL; Idle to 5500 RPM
................................................................ #11009 $169.95 ea
83-85 Edelbrock Performer 302 Intake w/EGR;
Stock Replacement ................................. #11012 $204.95 ea
65-66 Edelbrock Performer RPM 302 Intake;
1500-6500; Stock Replacement for Shelby,
GT 350 .................................................... #11013 $199.95 ea
www.mustangsplus.com
EDELBROCK 229
Edelbrock
Performer® Manifolds
Performer RPM E-Boss 302 Manifold
(idle to 5500 rpm)
#11056
All
All
Performer 351-4v Cleavland, Boss 351w
w/4V Heads; Idle-5500 RPM ................... #11056
Performer 351-2v Cleavland Designed
To Accept 4V Carb Onto Cleaveland
2V Heads; Idle-5500 RPM....................... #11057
$229.95 ea
$266.95 ea
With the new Performer RPM E-Boss 302 manifold, you can build a mock
Boss engine by using a standard 302 block and Performer RPM Cleveland
cylinder heads. For high-performance street and competition, our dual-plane
design makes outstanding power from 1500 to 6500 rpm. The Cleveland port
layout and intake bolt hole pattern fit both 2V and 4V heads. Features include
8.2” deck height, Windsor end rails, water neck and distributor clearance plus
front and rear water bosses. Match with an Edelbrock Performer or Thunder
Series AVS carburetor.
Will not fit OE Boss 302 engines.
All
302 . ........................................................ #14348
$320.95 ea
Performer RPM E-Boss 351 Manifold
72-85 Performer 302 4 bbl intake w/ 2 bbl EGR plate
................................................................ #12153
72-87 Performer 351W 4 bbl intake w/ 2 bbl EGR plate
................................................................ #12154
84-86 Performer 351W 4 bbl EGR intake
................................................................ #12155
$298.95 ea
$284.95 ea
$259.95 ea
Build a mock Boss 351 engine with a standard 351 block and Edelbrock
Performer RPM Cleveland heads using the new Performer RPM E-Boss
351 manifold #7183. For both high performance street and competition, the
dual-plane design makes outstanding power from 1500 to 6500 rpm and the
Cleveland port layout and intake bolt hole pattern fit both 2V and 4V heads.
It features 9.5” deck height. Windsor end rails, water neck and distributor
hole clearance, front and rear water bosses with a standard square bore
carburetor pad. Edelbrock carbs will work with Ford automativc overdrive
trans (AOD) when used with Lokar bracket SRK-4000.
All
351 .......................................................... #13904 $260.95 ea
Performer® RPM Manifolds
(1500 to 6500 rpm)
Performer 390 Intake Manifold
69-up Performer RPM 351w; No Provision for
Choke or Rear Water CRO, 1500-6500 RPM
................................................................ #11058
$219.95 ea
Ford 332-428 V8 PERFORMER 390 (idle-5500 rpm) 1966-72 (1973 nonCA); except stock equipped EGR. Manifold not equipped with EGR; will not
accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 c.i.d.
and 391 c.i.d. Ford truck V8s.
69-72 Edelbrock Performer 351w; Except Stock
w/EGR; Idle-5500 .................................... #11059
230 EDELBROCK
$214.95 ea
66-72 332-352-360-406-410-428 V8
w/ med or low rise cyl. heads .................. #12365
CALL TOLL FREE 1-800-999-4289
$336.95 ea
MUSTANGS PLUS
1964½ - ‘73
CATALOG
Edelbrock
Edelbrock EndurashineTM
Performer 5.0 EFI
Air Gap Manifolds
All
All
351w, Air Gap 1500-6000 Rpm ............... #12150
289-302, Air Gap, 1500-6500 rpm ........... #12149
$379.95 ea
$379.95 ea
Victor Series Manifolds
86-95 Performer 5.0 Manifold; w/5.0 EFI
(Idle-5500 RPM) ...................................... #11061
$584.95 ea
Deliver Race-Winning Performance for Competition Engines
Edelbrock’s engineers work closely with engine builders from all forms of
racing to produce manifolds with superior horsepower and torque potential
for competition. Victor Series manifolds have extra material for port matching
and customizing to maximize performance. Edelbrock Victor Series manifolds
provide race-winning power!
Performer 5.0 RPM II EFI
All
All
All
86-95 Performer 5.0 RPM II Manifold; w/5.0 EFI
(1500-6500 RPM) ................................... #11060
Victor Jr. Intake; 289, 302, Racing Manifold,
Modified/Aftermarket Heads;
3500-8000 RPM ...................................... #11032
Victor Jr. 351w Intake; Race Engines w/9.5”
Deck Height, w/Performer Heads
w/1.90 Intake. .......................................... #11034
Victor Jr. 9.2 deck 351W 2 bbl Victor Jr
sportsman intake manifold., Aluminum.... #14170
$279.95 ea
$329.95 ea
$359.95 ea
$636.95 ea
Air Gap Manifolds
Edelbrock EndurashineTM
Performer Intake Manifold
All
NEW ENDURASHINETM FINISH
• Bright silver finish with powder coated durability.
• Resists discoloratrion from heat.
• Clear top coat enhances polished aluminum look for a great
appearance.
• Three step Vacuum Metalizing Process: base coat, aluminum coat,
and clear top coat to enhance abrasion and chemical resistance.
• Offers a bright, durable, maintenance-free polished aluminum look.
All
All
260, 289, 302 w/out EGR ........................ #11505
289-302, 1500-6500 rpm non EGR ......... #12151
$289.95 ea
$301.95 ea
RPM Air-Gap 289, 302 intake; No Exhaust
Heat Crossover; 1500-6500 RPM ........... #11011
All
Edelbrock RPM Air-Gap 351w intake;
Dual Plane; 1500-6500RPM.................... #11033
70-73 Edelbrock 351C intake 2bbl head
dual plane,1500-6500 rpm ...................... #12156
$257.95 ea
$279.95 ea
$330.95 ea
Edelbrock Intake Manifold Gaskets
All
Small block intake manifold gaskets, end
seals are not included, use RTV silcone. ...#11508 $ 15.95 set
www.mustangsplus.com
EDELBROCK
231
Edelbrock
Edelbrock Manifold & Carburetor S/B Kit
Edelbrock RPM Air Gap Dual Quad Manifold
All
Edelbrock is making it easy to upgrade your induction system with the best
combination of proven Edelbrock performance in a single box. The new
Manifold and Carb Kits feature our show-quality EnduraShine™ finish and
provide everything needed to install an Edelbrock manifold and carburetor
on street rods or muscle cars.
All
All
All
Edelbrock Manifold and Carburetor kits include:
• Performer, RPM, or RPM Air-Gap intake manifold
with EnduraShine finish
• Varying manifold and carburetor combinations to suit your engine’s
air and fuel requirements
• Performer Series or Thunder Series AVS carburetor with the
EnduraShine finish
• Chrome fuel inlet
• High-quality Edelbrock intake gasket set
• All necessary hardware including, intake bolt set and carburetor stud kit
All
289-302 Performer w/ performer 600 cfm carburetor
w/ Endurashine finish .............................. #12718 $719.95 ea
289-302 Performer RPM w/ Thunder AVS 800 cfm carburetor
w/ Endurashine finish ............................. #12719 $819.95 ea
289-302 Performer RPM Air Gap w/ Thunder AVS 800 cfm
carburetor w/ Endurashine finish ............ #12720 $879.95 ea
351W Performer RPM Air Gap w/ Thunder AVS 800 cfm
carburetor w/ Endurashine finish ............ #12721 $879.95 ea
FE Performer RPM w/ Thunder AVS 800 CFM carburetor
w/ Endurashine finish .............................. #12722 $1,009.95 ea
All
All
All
All
Edelbrock RPM Air Gap Dual Quad Kit
232
289-302 Ford standard finish .................. #13405
289-302 Ford Endurashine finish ............ #13406
351W Ford standard finish ...................... #13407
351W Ford Endurashine finish................ #13408
EDELBROCK
$1,089.95
$1,299.95
$1,069.95
$1,319.95
$336.95 ea
$409.95 ea
$319.95 ea
$389.95 ea
Edelbrock Top End Kit Small Block
POWER PACKAGE™ TOP END KIT FOR SMALL-BLOCK FORD
The Edelbrock Total Power Package is a concept that we pioneered in the
1980s that provides you with performance-matched components designed
and engineered to work together as a package. This dyno-proven combination ensures that you have everything you need to meet your performance
goals with proven results.
To make things easier in the parts selection process, we have taken the
Total Power Package to the next level by actually placing the power package components together under a single part number. That’s right…the
Edelbrock Power Package Top End Kits provides proven performance in
one box, without the guesswork.
Each kit includes: intake, heads, cam & lifters (except roller lifters), head &
intake bolt kits, a complete gasket set as well as a timing chain and gear set.
Push rods and rocker arms not included. Simply finish the system with the
Edelbrock carburetor that best matches your application. Kit carton dimensions
are 12” high x 12-3/4” wide x 14-1/2” deep, approximately 98 lbs.
Edelbrock RPM Air-Gap Dual-Quad kits include:
• All New design RPM Air-Gap Dual-Quad intake manifold engi
neered for increased horsepower and torque
• As-Cast (standard) or EnduraShine (optional) finish
• Thunder Series AVS carburetor precision tuned for accurate twocarburetor calibration
• Endura finished fuel inlet
• Progressive throttle linkage for accurate throttle position and carb
timing
• High-quality Edelbrock intake gasket set
• American Made Performance and Quality
All
All
All
All
289-302 Small block Ford standard finish
................................................................ #13411
289-302 Small block Ford Endurashine finish
................................................................ #13412
351W Small block Ford standard finish .. #13413
351W Small block Ford Endurashine finish
................................................................ #13414
All
All
289-302 Ford 367 HP ........................... #13409
351W Ford 400 HP ............................... #13410
$1,879.95 ea
$1,826.95 ea
FOR EDELBROCK & RUSSEL FUEL LINES AND
FITTINGS PLEASE SEE OUR FUEL SECTION
LOCATED IN THIS CATALOG!
kit
kit
kit
kit
CALL TOLL FREE 1-800-999-4289
MUSTANGS PLUS
1964½ - ‘73
CATALOG
Edelbrock
Performer Ford Heads
Performer RPM Roller Camshaft Kit
#11036
Performer 50-state street legal heads provide outstanding bolt-on
performance for 1965-95 289, 302 and 351 Windsor V8s. Capable of 300+
hp when matched with the Edelbrock Performer Power Package.
All
All
Performer Head 1.90” Intake A.I.R. Passage;
289, 302, 351w; Aluminum Head w/haust
Crossover ................................................ #11035 $634.95 ea
All
Performer RPM Head 2.02” Intake 289,302,
351w; Non Emission Head, Must Notch
Pistons;.................................................... #11036 $582.95 ea
All
Performer RPM Head, 289,302,351W
polished w/ 1.90” intake valves ............... #12568 $629.95 ea
All
Performer RPM Head, 351C2.05” intake/1.60 exhaust valves,
based on 2bbl heads............................... #12160 $979.95 ea
61-76 Performer, FE engine, Complete aluminum
head 2.09” intake / 1.66” exhaust valves
............................................................... #12400 $819.95 ea
82-95 Edelbrock 5.0/5.8 head 2.02 intake
complete aluminum head
w/ exhaust crossover .............................. #12227 $629.95 ea
Small block Ford 351W, incl.
hydraulic roller camshafts, lifters,
pushrods. Uses cam #13415 .................. #13905
$723.95 kit
Hydraulic Roller Camshaft
All
351Wperformer RPM camshaft .573 / .582 lift 1500-6500 RPM
................................................................ #13415 $199.95 ea
65-85 Hydraulic roller camshaft duration
289/302 lift .520/.520, 1500-6500 RPM .. #12230 $231.95 ea
Performer-Link
True-Rolling Timing Chain Sets
Performer Camshaft & Lifter Kits
#11043
Designed for optimum torque from the low-end to the mid-range, PerformerPlus camshafts match with Performer manifolds for vehicles operating from
off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks,
vans, RVs and 4x4s. You can expect a major improvement in throttle response
and torque. In the manifold section you’ll find torque graphs showing the power
gains from Performer manifolds and Performer-Plus cams. All camshafts
come with hydraulic lifters (except for cams designed for use with stock roller
lifters), assembly lube and instructions. Many of our most popular PerformerPlus camshafts for small-block Fords are 50-state street legal.
All
All
All
All
Camshaft Kit, 289, 302; Idle-5500 RPM;
Cam & Lifters.......................................... #11039
Camshaft Kit; 351w, Idle-5500 RPM;
Cam & Lifters.......................................... .#11040
RPM Camshaft Kit; 289, 302,
Hi Performance; 1500-6500 RPM;
Cam & Lifters.......................................... #11041
RPM Camshaft Kit; 351w, 1500-6500 RPM;
Cam & Lifters.......................................... #11042
All
Timing Set; 62-65, 73-95: 221, 260, 289,
302, 351w; Steel Gears, Multi Gears; .... #11043 $ 59.95 set
65-72 Timing Set; 221, 260, 289, 302,
Boss 302, 351w; .................................... #11044 $ 51.95 set
70-82 351C-351M-400steel gear multiple keyways
................................................................ #12232 $ 57.95 set
$166.95 kit
Head Bolts & Bushings
$179.95 kit
FOR USE WITH EDELBROCK HEADS
All
All
Small block, 7/16” head bolt Set................#12138 $ 59.95 set
289, 302 , 20 pc. head bolt bushing Set. ....#11932 $ 52.95 set
$222.95 kit
Edelbrock Head Gasket Set
$229.95 kit
Edelbrock Performer Plus Camshaft
70-82 Hydraulic flat tappet camshaft duration
282/292 lift ..484/.510 Idle - 5500 RPM . #12231
Performer-Link timing chain sets are for use with Edelbrock or stock
cams. They have a solid-bushing chain for a true bearing surface that rolls
with the sprockets, eliminating chain stretch. Crank gears are machined
from SAE-1144 stressproof steel. Three Performer-Link sets are stock
replacement parts and 50-state legal.
$178.95 ea
260, 289, 302, 351w; Head gasket set includes intake, exhaust head,
waterneck and valve cover gaskets
All
...................................................................#11509 $ 94.95 set
www.mustangsplus.com
EDELBROCK 233
Edelbrock
Spring Assortment
Heat Insulator
Edelbrock Divided Heat Insulator Gasket, For Use w/Edelbrock Carbs,
Performer/Performer RPM Manifolds.
All
...................................................................#11019
$ 17.95 ea
1” Phenolic Carb Spacer
All
Setup Spring Assortment; 3” HG (blue), 4HG(yellow),
5” HG (orange), 7” HG (pink), 8” HG (plain).
...................................................................#11014 $
6.95 pk
Off Road Needles & Seats
All
1” Carb Spacer; Enhances Low RPM
Torque/Throttle Reponse; With Studs ........#11030
$ 29.95 ea
All
Banjo Fitting
Edelbrock Off- Road Spring Loaded .0935
Needles & Seats.........................................#11015
$ 12.95 pr
High Flow Needles & Seats
All
All
Edelbrock Performer Banjo Fitting; 3/8” Inlet,
5/8”-20 Bolt, Fuel Inlet Fitting .....................#11018
Edelbrock 90 Degree Vacuum Fitting;
Low Profile On Manifold. ............................#11031
$ 11.95 ea
$ 12.95 ea
All
Metering Jets For Edelbrock Carburetors
Edelbrock metering jets .100 ..................................#11020
Edelbrock metering jets .101 ..................................#11021
$
$
Edelbrock High Flow Needles & .110 Seats
...................................................................#11016
$
9.95 pr
Electric Choke Conversion
4.95 pr
4.95 pr
Metering Rods For Edelbrock Carburetors
All
Edelbrock metering rods .070 X .037 .....................#11022
Edelbrock metering rods .070 X .042 .....................#11023
Edelbrock metering rods .070 X .047 .....................#11024
Edelbrock metering rods .073 X .037 .....................#11025
Edelbrock metering rods .073 X .057 .....................#11026
Edelbrock metering rods .075 X .042 .....................#11027
Metering Rods .073 x .042. ....................................#11062
234
EDELBROCK
$
$
$
$
$
$
$
8.95
8.95
8.95
8.95
8.95
8.95
8.95
pr
pr
pr
pr
pr
pr
pr
Electric Choke Conversion Kit; To Convert
Manual Choke To Electric Choke. ..............#11017
$ 49.95 kit
Throttle Lever Adapter
68-up Edelbrock Throttle Lever Adapter; Cars with
Throttle Cables, AT w/out AOD ...................#11028
CALL TOLL FREE 1-800-999-4289
$ 19.95 ea
MUSTANGS PLUS
1964½ - ‘73
CATALOG
Edelbrock
Calibration Kits
Performer series, 1403, 1404 .............................. #11983
Performer series, 1405 ........................................ #11984
Performer series, 1406 ........................................ #13550
Thunder series AVS, 12157, 12158, 1805, 1806 . #13551
Performer series ,12159, 1411 ............................ #13552
Thunder series AVS, 12054, 1803, 1804 ............. #13553
Performer series, 11004, 1407, 1410, 1412, 1413#13554
Thunder series AVS, 1812, 1813 ......................... #13555
Performer series, 1409 ........................................ #13556
Thunder series AVS, 1825, 1826 ......................... #13557
Intake Manifold Bolt Kit
$
$
$
$
$
$
$
$
$
$
57.95
61.95
39.95
54.95
48.95
5895
55.95
66.95
54.95
53.95
kit
kit
kit
kit
kit
kit
kit
kit
kit
kit
All
260, 302, Intake Manifold Bolt Kit..............#10963
$ 26.95 kit
All
Edelbrock 351-W intake manifold bolt kit #10964
$ 26.95 kit
All
360, 390, w/Edelbrock #2105 Intake;
Intake Manifold, Bolt Kit............................ #10965
$ 21.95 kit
Progressive Linkage Kit
Performer IAS Shock
Progressive Linkage; Use w/ Dual Quad Manifolds,
Carbs; High Quality ..............................................#11029
#11055
$ 51.95 kit
Carbruetor Stud Kit
All
Carb Studs + Washers 5/16”x18x3/8” ......#10966
$
3.95 kit
• Absolutely the Most Advanced, Best Performing Shock Absorber
Available Today
• Specifically Calibrated and Tested for Each Vehicle
• The Same Mono-Tube Construction Used in Racing Shock Absorbers
• Large, 46mm Piston for More Consistent Damping
• Mono-Tube Design Provides Excellent Heat Dissipation Resulting in
Consistent Performance Under All Conditions
• The Patented IAS Valve combined with High-Pressure Gas Charging
Provides the Best Ride and Handling of Any Shock Absorber Made
• Manufactured by Edelbrock in the USA for Outstanding Quality and
Performance
• Limited Lifetime Warranty
65-70 Performer IAS Front Shock;
Mono Tube Gas Shock;Mustang,
Cougar/Shelby GT350/500........................#11053 $ 87.95 ea
All
Carb Studs + Washers 5/16”x18x1¾” ......#10967
$
7.95 kit
65-73 Performer IAS Rear Shock;
Mono Tube Shock;Mustang, Cougar,
Shelby GT350/500 ....................................#11054 $ 87.95 ea
www.mustangsplus.com
EDELBROCK 235
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement