BDP-3130 Blu-ray Disc PLAYER | Manualzz
BDP-3130
Operating Instructions
Blu-ray Disc PLAYER
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to
operate your model properly. After you have finished reading the instructions, put them away in a safe place for future
reference.
CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
D3-4-2-1-1_B1_En
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC 60825-1:2007,
but this product contains a laser diode higher than
Class 1. To ensure continued safety, do not remove
any covers or attempt to gain access to the inside of
the product.
Refer all servicing to qualified personnel.
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c*_A1_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.
K041_A1_En
CLASS 1 LASER PRODUCT
(Symbol examples for batteries)
The following caution label appears on your unit.
Location: inside of the unit
These symbols are only valid
in the European Union.
Pb
K058c_A1_En
POWER-CORD CAUTION
D58-5-2-2b*_B1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 10 cm at top, 10 cm at rear, and 10 cm at each
side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
D3-4-2-1-7b*_A1_En
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
D3-4-2-1-3_A1_En
CA
The
com
Sin
dev
AC
sur
cor
cas
cor
wh
exa
o
ure
H
n
(or
1_En
y
s
es
_En
d
_En
he
a
he
er
hey
rd
ck
1_En
1_En
CAUTION
Theġ STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
example, when on vacation).
D3-4-2-2-2a*_A1_En
Condensation
If the player is moved suddenly from a cold place into a
warm room (in winter, for example) or if the
temperature in the room in which the player is installed
rises suddenly due to a heater, etc., water droplets
(condensation) may form inside (on operating parts and
the lens). When condensation is present, the player will
not operate properly and playback is not possible. Let
the player stand at room temperature for 1 or 2 hours
with the power turned on (the time depends on the
extent of condensation). The water droplets will
dissipate and playback will become possible.
Condensation can also occur in the summer if the
player is exposed to the direct wind from an
air-conditioner. If this happens, move the player to a
different place.
S005_A1_En
“Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo
are trademarks of Blu-ray Disc Association.
is a trademark of DVD Format/Logo
Licensing Corporation.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and other
countries.
“BONUSVIEW” is trademark of Blu-ray Disc
Association.
The player support the BD-ROM profile version 2,
you can use bonusview functions, such as the
secondary Video (Picture-in-Picture) play and the
secondary Audio. With bonusview function (the
secondary Video (Picture-in-Picture) and the
secondary Audio) may be stored in memory
together the data.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872 &
other U.S. and worldwide patents issued &
pending. DTS, DTS-HD, the Symbol, & DTS or
DTS-HD and the Symbol together are registered
trademarks of DTS, Inc. ©DTS, Inc. All Rights
Reserved.
“BD-LIVE” logo is trademark of Blu-ray Disc
Association.
For BD-ROM format, You can use the BD-J
(Java) application to create a highly interactive
title.
ABOUT DIVX VIDEO: DivX® is a digital video
format created by DivX, LLC, a subsidiary of Rovi
Corporation. This is an official DivX Certified®
device that plays DivX video. Visit divx.com for
more information and software tools to convert
your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu.
Go to vod.divx.com for more information on how
to complete your registration.
DivX®, DivX Certified®, DivX PlusTM HD and
associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under
license.
Oracle and Java are registered trademarks of
Oracle and/or its affiliates. Other names may be
trademarks of their respective owners
“AVCHD” and the “AVCHD” logo are trademarks
of Panasonic Corporation and Sony Corporation.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
“x.v.Color” and
Sony Corporation.
are trademarks of
Real RMVB logo is a trademark or a registered
trademark of RealNetworks, Inc.
Contents
Chapter 1 Before you start
Checking the Accessories ............................ 6
Propare the remote control ........................... 6
Types of discs/files that can be played ......... 7
Playable discs .......................................... 7
Playable files ............................................ 9
Part Names and Functions ..........................11
Remote Control ........................................11
Front Panel ...............................................12
Rear Panel ...............................................12
Chapter 2 Connecting up
Connecting using an HDMI cable ................13
About HDMI ..............................................13
About others makers’s discreteness of
connection (Supporting HDMI CEC
function) ...................................................13
Connecting a TV ......................................14
Connecting an AV receiver or
amplifier ....................................................14
Connecting an AV receiver or amplifier using
an coaxial digital audio cable ......................15
Connecting components to the USB port ....15
About USB devices ..................................15
Connecting the USB device .....................16
Network connection .....................................16
Connecting via an Ethernet hub ..............16
Connecting the power cord (Asean model
only)...............................................................16
Chapter 3 Getting Started
Making settings using the Setup Navigator
menu ............................................................17
Chapter 4 Playback
Playing discs or files ....................................18
Pause .......................................................18
Stop ..........................................................19
Quick View (Quick view with audio) .........19
Fast Forward and Fast Reverse ...............19
Playing specific chapters, tracks or files....19
Previous and Next ....................................19
To return to a position a short while ago .... 19
To advance to a position slightly ahead ....19
Step ..........................................................19
A-B ............................................................20
Repeat ......................................................20
Zoom ........................................................20
Playing photos as slideshows ...................20
Switching the camera angles ...................20
Switching the subtitles .............................20
Moving subtitles .......................................21
Switching the audio ..................................21
Displaying the disc information ................21
Continuing playback from a specified
position (Continued Viewing Playback) .....21
Playback functions ...................................22
Using the FUNCTION menu .........................23
Using the Play Mode functions ....................24
Playing a specific title, chapter or track
(Search) ....................................................24
Playing in random order
(Random Play) .........................................24
Playing from the Home Media Gallery .........25
Playing discs ............................................25
Playing video files ....................................25
Playing image files ...................................26
Playing audio files ....................................26
Playing in the desired order (Playlist)........27
Chapter 5 Advanced settings
General Setting ............................................28
System.......................................................28
Language..................................................29
Playback....................................................30
Parental Lock............................................30
Network.....................................................31
Video Output ................................................32
Display Setting..........................................32
Video Process...........................................33
Mode selection..........................................33
Audio Output ................................................33
Audio Setting.............................................34
System Information ......................................34
About how digital audio formats are
output............................................................35
Chapter 6 Additional information
Cautions on use ...........................................36
Moving the player .....................................36
Place of installation ...................................36
Turn the power off when not using the
player ........................................................36
About Condensation .................................36
Cleaning the player ...................................36
Caution for when the unit is installed in a
rack with a glass door ...............................36
Cleaning the pickup lens ..........................37
Handling discs ..........................................37
Troubleshooting ............................................38
Playback ...................................................38
Network ....................................................41
Others .......................................................41
Glossary........................................................43
Specifications ...............................................45
Chapter 1
01
Before you start
Check the Accessories
• Remote control unit x 1
• AAA/R03 size battery x 2
• Power cord x 1 (Asean model only)
• Software license notice
• Operating instrusctions (this document)
Prepare the remote control
1. Open the battery compartment.
2. Insert 2 batteries (AAA/R03 size battery)
with correct polarity (
/
) as indicated.
3. Close the battery compartment.
6
Notes:
• Do not use any battery other than the ones
specified. Also, do not use a new battery
together with an old one.
• When loading the batteries into the remote
control, set them in the proper directin, as
indicated by the polarity marks(
/
).
• When inserting the batteries, make sure
not to damage the springs on the batteryis
(
) terminals. This can cause batteries
to leak or overheat.
• Do not heat batteries, disassemble them,
or throw them into flames or water.
• Batteries may have different voltages, even
if they look similar. Do ot use different
kinds of batteries together.
• To prevent leakage of battery fluid, remove
the batteries if you do not plan to use the
remote control for a long period of time (1
month or more). If the fluid should leak,
wipe it carefully off the inside of the case,
then insert new batteries. If a battery
should leak and the fluid should get on
your skin, flush it off with large quantities of
water.
• When disposing of used batteries, please
comply with governmental regulations or
environmental pubic institution's rules that
apply in your country/area.
Warning
• Do not use or store batteries in direct
sunlight or other excessively hot place,
such as inside a car or near a heater. This
can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the
life or performance of batteries.
• The batteries included with the unit are to
check initial operations; they may not last
over a long period.
Types of discs/files that can be played
01
Playable discs
Discs with the logo marks below indicated on the disc label, package or jacket can be played.
Notes:
• Only the discs that have been finalized can be played.
Application format
Disc types
BD
2
DVD
CD
Logo
BDMV
BDAV
DVDVideo
DVD VR
CD-DA
DTS-CD
DATADISC1
BD-ROM
1
1
x
x
x
x
BD-R
1
1
x
x
x
1
BD-RE
1
1
x
x
x
1
DVD-ROM
1
x
1
x
x
1
DVD-R2,3,4
1
1
6
1
1
x
1
DVD-RW3,7
1
5
1
6
1
1
x
1
DVD+R2,3
1
x
1
x
x
1
DVD+RW3
1
x
1
x
x
1
CD-DA
(Audio CD)8
x
x
x
x
1
x
CD-R3
x
x
x
x
1
1
CD-RW3
x
x
x
x
1
1
CD-ROM
x
x
x
x
1
1
5
1. Discs on which video, image or audio files are recorded.
2. Including dual-layered discs.
3. Finalize them before playing them on this player.
4. DVD-R for Authoring discs (3.95 and 4.7 GB) cannot be played.
5. Including the AVCHD format.
6. Including the AVCREC format.
7. Version 1.0 DVD-RW discs cannot be played.
8. Including Video CDs.
7
01 * Discs that cannot be played
• FUJICOLOR-CD
• Kodak Picture Discs
• DVD-RAM Discs
• SACD Discs
It is possible that some discs other than the
ones listed above may not be playable either.
Notes:
• Some discs cannot be played, even if one
of the logo marks on the previous page is
indicated.
• When playing a 8cm disc, set the disc in the
disc tray’s 8cm ring. No adapter is
necessary. Do not play 8 cm BD-ROM
discs.
* About playback of unauthorized copies
Cinavia Notice
This product uses Cinavia technology to
limit the use of unauthorized copies of
some commercially-produced film and
videos and their soundtracks. When a
prohibited use of an unauthorized copy is
detected, a message will be displayed and
playback or copying will be interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.
com. To request additional information
about Cinavia by mail, send a postcard with
your mailing address to: Cinavia Consumer
Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
Copyright 2004-2010 Verance Corporation.
Cinavia? is a Verance Corporation
trademark. Protected by U.S. Patent
7,369,677 and worldwide patents issued
and pending under license from Verance
Corporation. All rights reserved.
* About copyright protection
Copyright protection technology is used for
some Blu-ray Discs™, DVDs and contents
played over the Internet or other networks.
Copyright protection technology restricts
playback and analog output. Due to
updates in copyright protection provisions,
the restrictions may differ depending on the
date this product was purchased.
Furthermore, the restrictions may be
updated when the software is updated after
purchase.
* For Audio formats
The following audio formats are supported on
this player:
8
• Dolby Digital ( Dolby TrueHD, Dolby Digital
Plus and Dolby Digital )
• DTS-HD Master Audio
• DTS-HD High Resolution Audio
• DTS Digital surround
• MPEG audio (AAC)
• Linear PCM
To enjoy the surround sound of Dolby TrueHD,
Dolby Digital Plus, DTS-HD Master Audio and
DTS-HD High Resolution Audio, it is
recommended to connect the player to an AV
receiver or amplifier compatible with these
audio formats using an HDMI cable. After
loading a BD containing sound in one of these
audio formats, select the audio format on the
menu screen.
* Playing BDs
• BDs (BDMV) compatible with the formats
below can be played.
- Blu-ray Disc Read-Only (ROM) Format
Version 2
- Blu-ray Disc Recordable (R) Format
Version 2
- Blu-ray Disc Rewritable (RE) Format
Version 3
• BDs (BDAV) compatible with the formats
below can be played.
- Blu-ray Disc Recordable (R) Format
Version 1
- Blu-ray Disc Rewritable (RE) Format
Version 2
* Playing DVDs
This label indicates playback compatibility with
DVD-RW discs recorded in VR format (Video
Recording format). However, for discs
recorded with a record-only-once encrypted
program, playback can only be achieved using
a CPRM compatible device.
The AVCHD is a high definition (HD) digital
video camera recorder format recording highdefinition onto certain media by using highly
efficient codec technologies.
* About region numbers
Blu-ray Disc Player and BD-ROM or DVDVideo discs are assigned region numbers
according to the region in which they are sold.
This player's region numbers are:
• BD-ROM: A
• DVD-Video: 3
Discs not including these numbers cannot be
played. Discs playable on this player are as
shown below.
• BD: A (Include A) and ALL
• DVD: 3 (Include 3) and ALL
* Playing CDs
Regarding copy protected CDs: This player is
designed to conform to the specifications of
the Audio CD format. This player does not
support the playback or function of discs that
do not conform to these specifications.
* DualDisc playback
A DualDisc is a new two-sided disc, one side
of which contains DVD content — video,
audio, etc. — while the other side contains
non-DVD content such as digital audio
material.
The DVD side of a DualDisc can be played on
this player (excluding any DVD-Audio content).
The non-DVD, audio side of the disc is not
compatible with this player.
It is possible that when loading or ejecting a
DualDisc, the opposite side to that being
played will be scratched. Scratched discs may
not be playable.
For more detailed information on the DualDisc
specification, please refer to the disc
manufacturer or disc retailer.
* Playing discs created on computers or
BD/DVD recorders
•It may not be possible to play discs
recorded using a computer due to the
application settings or computer’s
environment settings. Record discs in a
format playable on this player. For details,
contact the dealer.
•It may not be possible to play discs
recorded using a computer or a BD/DVD
recorder, if burn quality is not good due to
characteristics of the disc, scratches, dirt
on the disc, dirt on the recorder’s lens, etc.
* About video, audio, and image files and
folders
Audio and image files can be played on this
player when the folders on the disc or USB
device are created as described below.
Example of folder structure:
Root
001.jpg/001.mp3
*
xxx.jpg/xxx.mp3
01 Folder
*
001.jpg/001.mp3
Folder
xxx.jpg/xxx.mp3
001.jpg/001.mp3
XX Folder
xxx.jpg/xxx.mp3
*
001.jpg/001.mp3
*
xxx.jpg/xxx.mp3
* The number of folders and files within a
01
single folder (including the root directory) is
limited to a maximum of 256. Also, keep the
number of folder layers to a maximum of 5.
Notes:
•The file and folder names displayed on this
player may differ from those displayed on a
computer.
•Files are played in ASCII code order for
discs, in the order in which they were
recorded for USB devices.
•For discs and USB devices, it is not
possible to play files in different folders.
Playable files
Video, image and audio files recorded on DVDs
and CDs can be played.
* Supported video file formats
• Real RMVB
• DivX Plus HD
DivX Certified® to play DivX® and DivX PlusTM
HD (H.264/MKV) video up to 1080p HD
including premium content.
Note:
• This DivX® Certified device must be
registered in order to play DivX Video-onDemand (VOD) content. First generate the
DivX VOD registration code for your device
and submit it during the registration
process. [Important: DivX VOD content is
protected by a DivX DRM (Digital Rights
Management) system that restricts
playback to registered DivX Certified
devices. If you try to play DivX VOD
content not authorized for your device, the
message Authorization Error will be
displayed and your content will not play.]
Learn more at www.divx.com/vod.
- This player’s DivX VOD registration code
can be checked at General setting d
Playback d DivX® VOD d Registration
Code
- The number of views is restricted for
some DivX VOD files. When such files are
played on this player, the remaining
number of views is displayed. Files for
which the remaining number of views has
reached 0 cannot be played (Rental
Expired is displayed). Files for which the
number of views is not restricted can be
played as many times as you like (the
remaining number of views is not
displayed).
9
* Table of Playable Files
01
Playable media
BD-R/RE/-R DL/
RE DL/-R LTH,
DVD-R/RW/-R DL/
+R/+RW/+R DL,
CD-R/RW
USB devices1
MP3
(.mp3)
1
1
• Sampling frequencies: Up to 48 kHz
• Bit rate: Up to 320 kbps
• Audio type: MPEG-1 Audio Layer 3
WMA2
(.wma)
1
1
• Sampling frequencies: Up to 48 kHz
• Bit rate: Up to 192 kbps
• Audio type: WMA version 9
AAC3
(.m4a)
1
1
• Sampling frequencies: Up to 96 kHz
• Bit rate: Up to 192 kbps
• Audio type: MPEG4-AAC
LPCM
(.wav)
1
1
• Sampling frequencies: Up to 192 kHz
• Quantization bitrate: 16 bit
• Channel: 2ch
FLAC
(.flac)
1
1
• Sampling frequencies: Up to 192 kHz
• Quantization bitrate: 16 bit, 24 bit
• Channel: 2ch
JPEG
(.jpg/.jpeg)
1
1
Playable files
(Extensions)
File specifications
• Maximum resolution: 4 000 x 3 000 pixels
DivX
(.avi/.divx/.
mkv)
1
1
• Supported versions: Through DivX® PLUS HD
• Maximum resolution:
• Up to 1 920 x 1 080 (DivX® PLUS HD)
• Up to 1 280 x 720 (MKV)
MP4
(.mp4)
1
1
• Maximum resolution: Up to 1 920 x 1 080
• Video: MPEG4, MPEG-4 AVC (level 4.1)
• Audio: AAC, MP3
WMV
(.wmv)
1
1
• Maximum resolution: Up to 1 280 x 720
• Video: WMV9, WMV9AP (VC-1)
• Audio: WMA
AVI
(.avi)
1
1
• Maximum resolution: Up to 1 920 x 1 080
• Video: MPEG4
• Audio: MP3, AAC
3GP
(.3gp)
1
1
• Maximum resolution: Up to 1 920 x 1 080, 8 Mbps
• Video: H.263, MPEG4, H.264
• Audio: MPEG-4 AAC
FLV
(.flv)
1
1
• Video: Sorenson H.263 (FLV1), VP6 (FLV4), H.264
• Audio: MP3, AAC
RMVB
(.rm/.rmvb)
1
1
• Maximum resolution: Up to 1 280 x 720
• Video: RealVideo ®
• Audio: RealAudio ®, AAC
1. This unit supports FAT16, FAT32 and NTFS file systems.
2. WMA Pro, Lossless and Voice are not supported.
3. Apple lossless encoding is not supported.
Note:
• Depending on the file structure, it may not be possible to play certain files, even for files indicated on the table of playable files
above.
• Files protected by DRM (Digital Rights Management) cannot be played (not including DivX VOD files).
10
Part Names and Functions
01
Remote control
1
13
2
14
3
15
4
16
5
17
6
7
8
9
10
11
12
REPLAY SHORT SKIP
1 STANDBY/ON - Press to turn the power
on and off.
2 Number buttons - Use these to select
and play the title/chapter/track you want to
view or listen to and to select items from
menus.
3 TOP MENU - Press to display the top
menu of the BD-ROM or DVD-Video.
4 MEDIA GALLERY - Visit or exit Home
Media Gallery menu.
5 a/b/c/d - Use to select items, change
settings and move the cursor.
ENTER - Press to execute the selected
item or enter a setting that has been
changed, etc.
6 HOME MENU - Visit or exit setup menu.
7 A-B - To repeat from A to B.
REPEAT - Selects various repeat mode.
/ - To farward playback frame by
frame.
DISPLAY - To display a window to locate a
title, chapter or track.
8  - Start playback.
 - PAUSE/STOP playback.
 - PAUSE playback.
 - Press to skip to the beginning of the
previous title/chapter/track/file.
 - Press to skip to the beginning
of the next title/chapter/track/file.
/ - Press to scan Fast Reverse/
Forward search.
9 PROGRAM - To set track/chapter in a
favourite order during CD/DVD/VCD
playback.
BOOKMARK - To bookmark at any point
during playback.
ZOOM - During playback to zoom out/in.
Press repeatedly to select different picture
available in your player.
INDEX - During playback a JPEG disc,
press to view a page of 12 thumbnail
images. This button is only available in
JPEG mode.
10 SUBTITLE - Press repeatedly to select
different subtitles available in your disc.
AUDIO - Press repeatedly to select
different audio streams availble in your
disc.
HDMI - To switch to a resolution at which
the video and audio signals are output.
FUNCTION - To display a window to
control information.
11 REPLAY - Press during playback to return
to a position 10 seconds earlier.
12 SHORT SKIP - Press during playback to
forward to a position 30 seconds later.
13  OPEN/CLOSE - Open/Close the disc
tray.
14 CONTINUED - Start a playback from a
marked point.
15 CLEAR - Press to clear the numeric
number, etc.
16 POPUP MENU/MENU - Press to display
the BD-ROM or DVD-Video menus.
17 RETURN - Press to return to the previous
screen.
11
01 Front panel
1
2
USB
5V
0.5 A
 STANDBY/ON
 OPEN/CLOSE
3
4
1  OPEN/CLOSE - Press to open and
close the disc tray.
2  STANDBY/ON - Press to turn the
power on and off.
3 Disc tray
4 Remote control sensor - Point the
remote control to this, then operate it within
approximately 7 m.The player may have
trouble capturing remote control signals if
there is a fluorescent light nearby. If this
happens, move the player away from the
fluorescent light.
5
6
7
8
9
5 Front panel display
6 USB port - (page 15)
7 Reset button - If the power cannot be
turned off (set to standby), use a thin rod to
press this button. The unit restarts, at which
point it is again operable.
8 d - Press to start playback.
9 g - Press to stop playback.
Rear panel
2
1
3
4
5
AC IN
L
COAXIAL
DIGITAL OUT
R
AUDIO OUT
HDMI OUT
LAN (10/100)
1 Power cord (Asean model only) Connect the supplied power cord.
2 DIGITAL OUT (COAXIAL) Port - Output
digital audio signals when connecting the
coaxial digital cable.
3 AUDIO OUT Port - Outputs audio signals.
12
4 HDMI OUT Port - Outputs video/audio
signals.
5 LAN Port - Use this to connect to a
network with an always-on broadband
connection.
Chapter 2
Connecting up
Be sure to turn off the power and unplug the
power cord from the power outlet whenever
making or changing connections.
Also refer to the operating instructions of the
device being connected.
Connecting using an HDMI
cable
The audio and video signals can be transferred
to HDMI-compatible devices as digital signals
with no loss of sound or video quality.
Notes:
.• Make the settings at the Setup menu
according to connected HDMI-compatible
device.
.• 1080p video signals may not be output,
depending on the HDMI cable being used.
About HDMI
This player incorporates High-Definition Multimedia Interface (HDMI™) technology.
The player supports Deep Color.The conventional players can transmit a video signal with
8 bit color depth in the YCbCr 4:4:4 or RGB
formats, the players supporting Deep Color
can transmit a video signal with a color bit
depth of greater than 8 bits per color component. Subtle color gradations can be reproduced when connected to a TV that supports
Deep Color.
This product is compatible with “x.v.Color” that
have the capability to realize a wide-gamut
color space based on the xvYCC specifications. Playing video signals conforming to
“xvYCC” standards on this player when
connected to an “x.v.Color”-compatible TV,
etc., expands color reproduction capabilities,
allowing natural colors to be reproduced more
faithfully than ever.
“x.v.Color” is a promotion name given to the
products that have the capability to realize a wide-gamut color space based on the
international standard specifications defined
as xvYCC.
* About the HDMI high speed transmission
This player outputs 1080p and Deep Color
video signals. If your TV supports 1080/50p,
1080/60p or Deep Color signals, use a
High Speed HDMI ®/™ cable in order to take
advantage of the maximum performance the
player and TV can offer.
High Speed HDMI®/™ cables are tested to
carry signals up to 1080p. 1080i, 1080p and
720p video signals that are capable of Deep
Color can also be carried.
* When connected to a DVI device
• It is not possible to connect DVI devices
(computer displays, for example) that are
not compatible with HDCP. HDCP is a
specification to protect audiovisual content
across the DVI/HDMI interface.
• No audio signals are output. Connect using
an audio cable, etc.
• This player is designed for connection with
HDMI-compatible devices. When
connected to a DVI device, it may not
operate properly depending on the DVI
device.
About others makers’s discreteness
of connection (Supporting HDMI CEC
function)
Supporting HDMI CEC function of TV or
AV Systems (AV receiver or amplifier, etc.)
Converter is connected to the player using an
HDMI cable. And use below function.
• Auto-select function
• Unified language function
Note:
• some TV or AV system (AV receiver or
amplifier, etc.) maybe be not used above
all function.
* Audio signals that can be transferred
with the player’s HDMI OUT terminal
• Dolby Digital(Dolby TrueHD, Dolby Digital
Plus and Dolby Digital)
• DTS-HD Master Audio
• DTS-HD High Resolution Audio
• DTS Digital Surround
• MPEG-2 AAC
• Linear PCM
13
02
Connecting an AV receiver or amplifier
02 Connecting a TV
See Connecting an AV receiver or amplifier
below to connect an AV receiver or amplifier
using an HDMI cable.
Notes:
• Hold the plug when connecting and
disconnecting the cable.
• Placing a load on the plug could result in
faulty contact and no video signals being
output.
Player’s rear panel
AC IN
AUDIO OUT
TV
AC IN
To HDMI
input
terminal
AUDIO OUT
Match the direction
of the plug to the
terminal and
insert straight.
HDMI
HDMI OUT
OUT
To HDMI
input
terminal
LAN (10/100)
HDMI cable
(commercially
available)
Direction of signal flow
LAN (10/100)
Player’s rear panel
HDMI cable
(commercially
available)
Match the direction
of the plug to the
terminal and insert
straight.
It is also possible to connect to an
AV receiver or amplifier using an
HDMI cable (on the right column).
HDMI
HDMI OUT
OUT
Connect to an AV receiver or amplifier in order
to enjoy the surround sound of Dolby TrueHD,
Dolby Digital Plus, Dolby Digital, DTS-HD
Master Audio, DTS-HD High Resolution Audio
or DTS Digital Surround. For instructions on
connecting the TV and speakers to the AV
receiver or amplifier, refer to the operating
instructions of AV receiver or amplifier.
Notes:
• Hold the plug when connecting and
disconnecting the cable.
• Placing a load on the plug could result in
faulty contact and no video signals being
output.
AV receiver
or amplifier
To HDMI
From HDMI
input terminal output terminal
Direction of signal flow
14
HDMI cable
(commercially
available)
TV
Connecting an AV receiver
or amplifier using an coaxial
digital audio cable
Player’s rear panel
UT
White
AC IN
L
COAXIAL
DIGITAL OUT
R
AUDIO OUT
Red
HDMI OUT
LAN (10/100)
Coaxial digital audio
cable (commercially
available)
To coaxial digital
audio input terminal
AV receiver
or amplifier
2-channel analog
audio can also be
connected.
To audio
input
terminals
Audio cable
(commercially available)
Direction of signal flow
Connecting the USB device
02
Notes:
•Be sure to turn the player’s power off
before connecting or disconnecting USB
devices.
•When using an external hard disk as the
external storage device, be sure to turn on
the hard disk’s power before turning on the
player's power.
•If the USB device is write-protected, be
sure to disable the write-protection.
•When connecting the USB cable, hold onto
the plug, set the plug in the proper direction
for the port and insert it horizontally.
•Placing excessive loads on the plug may
result in poor contact, making it impossible
to write data on the USB device.
•When a USB device is connected and the
player’s power is turned on, do not unplug
the power cord.
Player’s front panel
Connecting components to
the USB port
About USB devices
The USB devices that can be connected to the
player are as shown below.
•USB 2.0-compatible USB flash drive
(capacity of 1 GB or greater, 2 GB or
greater recommended) or HDD (capacity 2
TB or less)
•File system: FAT16, FAT32 or NTFS
Notes:
•Devices formatted with a file system other
than the above cannot be used.
•USB devices may not be recognized if they
contain multiple partitions.
•Some USB devices may not operate with
this player.
•Operation of USB devices is not
guaranteed.
•BD-LIVE cannot be used with NTFS file
systems. Use it with FAT16 or FAT32.
USB
5V
0.5 A
 STANDBY/ON
USB flash drive
USB cable
(commercially
available)
Hard disk, etc.
Notes:
•Devices may not work if connected to the
USB port via a memory card reader or USB
hub.
•Use a USB cable with a length of 2 meters
or less.
15
02
Network connection
BD-LIVE functions such as downloading
movie trailers or additional audio and subtitle
languages and playing on-line games can be
enjoyed over the Internet.
Be sure to use a 10BASE-T/100BASE-TX
compatible Ethernet hub or router.
Connecting the power cord
(Asean model only)
Connect the power cord after all the
connections between devices have been
completed.
Player’s rear panel
AC IN
Connecting via an Ethernet hub
L
COAXIAL
DIGITAL OUT
R
AUDIO OUT
HDMI OUT
LAN (10/100)
The player can be connected to an Ethernet
hub using a LAN cable.
Power cord (supplied)
Player’s rear panel
To wall outlet
AC IN
COAXIAL
DIGITAL OUT
AUDIO OUT
LAN (10/100)
HDMI OUT
LAN cable
(commercially
available)
Internet
Modem
LAN
WAN
1
2
3
Ethernet hub
(router with hub
functionality)
Notes:
• If there is an available DHCP server in
your local area network, the IP address is
obtained automatically. Otherwise, set IP
address manually.
• For some Internet service providers, you
may have to set the individual network
configuration manually.
• Pioneer is not responsible for any
malfunction of the player due to
communication error/malfunctions
associated with your network connection
and/or your connected equipment. Please
contact your Internet service provider or
network device manufacturer.
16
Chapter 3
Getting Started
03
Making settings using the Setup Navigator menu
Be sure to perform these settings when using
the player for the first time.
Notes:
• Before turning on the power, check that the
connections between the player and other
devices are correct. Also, turn on the power
of the devices connected to the player
before turning on the player’s power.
• When using a Flat Screen TV or front
projector compatible with the HDMI CEC
function, set HDMI CEC to On on the
connected device before turning on the
player’s power.
4 Select and set the video and audio
output terminals.
Use a/b to select, then press ENTER. See
page 32.
QBHFὉ
$IPPTF
BSFTPMVUJPOUIBUGJUZPVS57
$IBOHFXJMMCFBQQMJFEJNNFEJBUFMZZPVIBWFTUP
EFUFSNJOFXIFUIFSUPTBWFUIFTFUUJOHPSSPMMCBDLUP
QSJPSSFTPMVUJPO#FUUFSQFSGPSNBODFXJMMCFQSPWJEFE
CZB)%.*DPOOFDUJPO
4FUVQ/FWJHBUPS
ᒭү
JJ
QQ
Q
J
Q
1SFWJPVT
0,
/FYU
5 Select the aspect ratio of your TV.
Use a/b to select, then press ENTER. See
page 32.
QBHFὉ
1 Turn on the TV’s power and switch the
input.
See the TV’s operating instructions for
instructions on operating the TV.
2 Turn on the player’s power.
Press  STANDBY/ON.
Check that the Setup Navigator menu is
displayed.
* If the Setup Navigator menu is not
displayed
 Press HOME MENU to display the Home
Menu, select General setting d System d
Setup Navigator, then press ENTER.
3 Select the OSD language.
Use a/b to select, then press ENTER.
page:2/5
Choose
an OSD language before starting.
Setup Nevigator
$IBOHFXJMMCFBQQMJFEJOOFYUQBHFZPVTIPVME
EFUFSNJOFXIFUIFSUPTBWFUIFTFUUJOHPSSPMMCBDLUP
QSJPSBTQFDUSBUJP
1SFWJPVT
'VMM
/PSNBM
1BO4DBO
-FUUFSCPY
0,
/FYU
6 Finish the Setup Navigator menu.
Press ENTER.
To redo the settings from the start, select Go
Back.
QBHFὉ
4FUVQ/FWJHBUPS
4FUUJOH
XJ[BSEJTUPCFGJOJTIFE
/PXQSFTT'JOJTICVUUPOUPHPUP)PNF.FOV1MFBTF
FOKPZJU
中文(繁体)
English
The language selected will be applied not only here
but aslo in other OSD windows, menus etc.
Previous
$IPPTF
BOBTQFDUSFUJPUIBUGJUZPVS57
4FUVQ/FWJHBUPS
1SFWJPVT
OK
0,
'JOJTI
Next
When a Pioneer Flat Screen TV that is
compatible with HDMI CEC is connected to
this player’s HDMI OUT terminal, language
settings are imported from the Pioneer Flat
Screen TV’s language settings before Setup
Navigator begins.
17
Chapter 4
04
Playback
Playing discs or files
This section describes the player’s main
operations. For the types of discs that can be
played, see Playable discs on page 7. For the
types of files that can be played, see Playable
files on page 9. Video, image and audio files
recorded on discs are played with the Home
Media Gallery .
Notes:
• Some discs start playing automatically
when the disc tray is closed.
• DVD-Video discs have parental lock
features. Input the password registered in
the player’s settings to unlock the parental
lock.
• For some BD-R/-RE, playback protection is
set for the disc or titles. Input the code
number set for the disc to unlock the
protection.
• Check Troubleshooting on page 38 if video
or audio signals are not being output
properly.
* If the disc menu is displayed
For some discs, the disc menu is displayed
automatically when playback starts. The
contents of the disc menu and the way to
operate differ from disc to disc.
* Resuming playback from where it was
stopped (resume playback function)
• When  is pressed during playback,
the point at which the disc stopped is
stored in the memory. When  is pressed,
playback resumes from that point.
• If the stop mode was set while playing a
slideshow of image files, playback starts
from the image file last displayed.
• To cancel the resume playback function,
press  again while playback is stopped.
REPLAY SHORT SKIP
1 Press  STANDBY/ON to turn on the
power.
Turn the TV’s power on and switch its input
beforehand.
2 Press  OPEN/CLOSE to open the disc
tray and load the disc.
Notes:
• Load the disc with the printed side facing up.
• Several dozen seconds are required to
read the disc. Once reading is completed,
the type of disc is displayed on the player’s
front panel display.
3 Press  to play the disc.
• To pause, press  during
playback.  on the player’s front panel
display lights when playback is paused.
• To stop, press  during playback.
18
Notes:
• The resume playback function is canceled
automatically in the following cases:
- When you switch to the standby mode.
- When the disc tray is opened.
- When the file list window is switched.
• If you cannot use the resume playback
function, use the continued viewing
playback function. With continued viewing
playback, you can specify the place you
want to play.
• The resume playback function cannot be
used for some discs.
• Set Last Memory to On to save the point at
which you last stopped playback, even
after the disc tray is opened or you switch
to the standby mode.
Pause
 During playback, press .
• Press . The sound will be muted.
The picture will be stop playback.
• Press  to resume the playback
again.
Stop
Playing specific chapters, tracks or files
 During playback, press .
• Press  button once to go to Prestop mode, the TV screen will show the
Pre-stop logo.
• Press  twice to stop the playback
completely.
• In the stop mode, playback picture files.
Press  to resume playback from the point
where playback is pre-stopped or from the
beginning of the disc after the playback is
completely stopped.
• When playback function is canceled, please
press  again.
Note:
• Not all Blu-ray Discs support the resume
feature.
 During playback, input the number of the
chapter/track/file you want to select.
•Use the number buttons (0 to 9) to input
the number, then press ENTER.
•Press CLEAR to clear the values you have
input.
Quick View (Quick view with audio)
Audio is being output while the video images
are played back at about 1.5 times the normal
speed.
 Press  while playing back BD-ROM or
DVD video images.
• If  is pressed during quick playback, it
will switch to fast forward.
* To return to normal playback
Press .
•When you cancel pause mode, it returns to
normal playback.
Note:
• During quick playback, it will become PCM
output.
•It is not possible to switch the audio during
quick playback.
•Depending on the audio format, such as
Dolby TreHD and DTS-HD Master Audio,
there may be instances in which quick
playback cannot be performed.
Fast Forward and Fast Reverse
 During playback, press  or .
• The scanning speed switches each time
the button is pressed. The speed steps
depend on the disc or file (the speed is
displayed on the TV screen). The speed is see
below:
2x → 4x → 8x → 16x →
32x
2x → 4x → 8x → 16x →
32x
* To resume normal playback
Press .
Previous and Next
 Press  or .
• During playback, press , it will
allow you to skip the playback to next
chapter/track/title/file of beginning.
• During playback, press , and
you can skip back to the start of the
chapter/track/title/file. Each press of this
button will allow you to skip a chapter or
track till the beginning of the disc.
To return to a position a short while ago
Press during playback to return to a position
10 seconds earlier.
 During playback, press REPLAY.
To advance to a position slightly ahead
Press during playback to forward to a position
30 seconds later.
 During playback, press SHORT SKIP.
Step
 During , press /.
• The step playback switches each time the
button is pressed.
• Press  to resume playback.
 During playback, press /.
• The slow forward speed mode switches
each time the button is pressed.
following sequence: 1/16X → 1/8X → 1/4X
→ 1/2X → normal.
• Press  to resume playback.
19
04
04 A-B
 During playback, Press A-B.
• Press A-B to set the start-point.
The point is A (start-point).
• Press A-B again to set the end-point.
The point is B (end-point).
Start A-B repeat.
* Cancel A-B repeat
• Press A-B the third time to cancel.
• During playback, press .
Note:
• During below thing, cancel A-B repeat.
- During begin other repeat or random
repeat.
Playing photos as slideshows
This function plays the photos, switching them
automatically.
 During playback, press INDEX.
•Display the thumbnail of image files. The
maximum number is 12 at once.
•If you select one of the image and press
ENTER, slideshow will start from the image
you selected.
* Rotating/inverting photos
When a slideshow is playing or paused, the
display switches as shown below when the
a/b/c/d buttons are pressed.
d button: Rotates 90° clockwise
c button: Rotates 90° counterclockwise
a button: Flips horizontally
b button: Flips vertically
Repeat
Switching the camera angles
 During playback, Press REPEAT.
• Press REPEAT repeatedly to select
different repeat modes.
as the BD/DVD following looped
sequences: CH, TT and All.
as the CD/JPEG/MP3 following looped
sequences: Only repeat normal or ALL.
Notes:
CH-Chapter
TT-Title
All-All
For BD-ROM and DVD-Video discs on which
multiple angles are recorded, the angles can
be switched during playback.
Zoom
 During playback, press ZOOM.
•Press ZOOM button repeatedly to Zoom in/
out playback in the video (the zoom model
is displayed on the TV screen).
Zoom mode: Zoom 2x → Zoom 3x →
Zoom 4x → Zoom 1/2 → Zoom 1/3 →
Zoom 1/4 → normal (not display)
Note:
• Not all Blu-ray Discs support the Zoom
function.
20
 During playback, select Angle from the
FUNCTION menu.
• The current angle and total number of
recorded angles are displayed on the TV
screen and on the player’s front panel
display.
Switching the subtitles
For discs or files on which multiple subtitles
are recorded, the subtitles can be switched
during playback.
Note
• The subtitles cannot be switched for discs
recorded on a DVD or BD recorder. Also
refer to the operating instructions of the
device used for recording.
 During playback, press SUBTITLE.
• The current subtitle and total number
of recorded subtitles are displayed on
the TV screen and on the player’s front
panel display.To switch the subtitle, press
SUBTITLE again.
• If the subtitles are not switched when
SUBTITLE is pressed, switch them from
the menu screen.
* Turning the subtitles off
 Press FUNCTION to select Subtitle
Language, and then select OFF.
* About displaying external subtitle files
while playing DivX media files
In addition to the subtitles recorded in DivX
media files, this player also supports the
display of external subtitle files. If a file has the
same name as a DivX media file aside from
the file extension and the extension is one of
the extensions listed below, the file is treated
as an external subtitle file. Note that DivX
media files and external subtitle files must be
located in the same folder.Only one external
subtitle file can be displayed on this player.
Use a computer, etc., to delete any external
subtitle files you do not want to display from
the disc.
Text files with the extensions “.smi”, “.srt”, “.
sub” and “.txt”are supported.
Note
• Depending on the file, the external subtitles
may not be displayed properly.
Displaying the disc information
Moving subtitles
Notes:
•In the cases below, the continued viewing
playback confirmation screen is displayed.
For BD videos
- The screen is displayed after the main
featured has been played.
For recorded discs
- The screen is displayed after the folder
is selected and the title set for continued
viewing playback has been played.
The position of the subtitles displayed while
playing BD-ROMs or DVDs can be moved.
1 Play the BD-ROM or DVD video and
display the subtitles on the TV screen.
2 Press and hold the SUBTITLE for at
least 2 seconds.
• The Subtitle shift mode is set.
• [Subtitle shift mode] is displayed on the TV
screen.
3 Use the a/b to move the position of the
subtitles.
•Use the ▲/▼ to move the position of the
subtitles.
•Once the setting is complete, press ENTER.
Switching the audio
For discs or files on which multiple audio
streams/channels are recorded, audio
streams/channels can be switched during
playback.
 During playback, press AUDIO.
•The current audio and total number of
recorded audio streams are displayed on
the TV screen. To switch the audio, press
AUDIO again.
•The audio can also be switched by
selecting Audio from the FUNCTION menu.
•If the audio is not switched when AUDIO is
pressed, switch it from the disc menu
screen.
04
 Press DISPLAY.
The disc information appears on the TV
screen. To switch off the information display,
press DISPLAY again. The information
display differs during playback and when
playback is stopped.
Continuing playback from a specified
position (Continued Viewing Playback)
This function allows you to continue playback
from a position you specify to be played next
time, even after turning the power off.
* Setting
 During playback, press CONTINUED at
the position from which you want to start
continued viewing playback.
The elapsed playing time at the specified
position is displayed on the TV screen.
* Playing
1 Press d to play the title for which you
have set continued viewing playback.
The continued viewing playback confirmation
screen appears.
2 Use c/d to select Yes, then press
ENTER.
Playback starts from the specified position.
Notes:
•The continued viewing playback setting is
canceled when h OPEN/CLOSE is
pressed.
•Continued viewing playback may not work
properly with some discs.
21
04 Playback functions
The functions that can be used differ according to the type of disc and file. In some cases, some
of the functions cannot be used. Check the usable functions on the table below.
Disc/file type
Function1
BDROM
BD-R
/-RE
DVDVideo
DVD-R
/-RW
(VR
format)
AVCREC
AVCHD
Video
file
Image
file
Audio
file
Audio
CD
PAUSE
1
1
1
1
1
1
1
1
1
1
Quick
playback2
1
1
1
1
1
1
x
x
x
x
Fast Forward
and Fast
Reverse3
14
14
14
14
14
14
14
x
15
15
Short Skip/
Replay
1
1
1
1
1
1
1
x
1
1
Continuing
playback
1
1
1
1
1
1
1
1
1
1
Slow motion
play6,7
1
1
1
1
1
1
1
x
x
x
Step3
1
1
1
1
1
1
1
x
x
x
Previous and
Next
1
1
1
1
1
1
1
1
1
1
A-B3
1
1
1
1
1
1
1
x
1
1
Repeat
1
1
1
1
1
1
1
1
1
1
ZOOM Files
1
1
1
1
1
1
1
1
x
x
Switching the
camera
angles8
1
x
1
x
x
x
x
x
x
x
Switching the
subtitles9
1
1
1
1
1
1
1
x
x
x
Switching the
audio
1
1
1
1
1
1
1
x
x
x
Displaying the
disc
information
1
1
1
1
1
1
1
1
1
1
1. Some functions may not work for some discs or files, even if indicated [1] on the table.
2. Depending on the audio format, such as Dolby TreHD and DTS-HD Master Audio, there may be instances in
which quick playback cannot be performed.
3. For some discs, normal playback resumes automatically when the chapter switches.
4. No sound is produced during forward and reverse scanning.
5. Sound is produced during forward and reverse scanning.
6. No sound is output during slow motion playback.
7. Reverse slow motion playback is not possible.
8. There are also disks that do not store more than one angle.
9. • The types of recorded subtitles depend on the disc and file.
• In some cases the subtitle may switch or the switching screen provided on the disc may be displayed
immediately, without the current subtitle or the total number of subtitles recorded on the disc being displayed.
22
Using the FUNCTION menu
Various functions can be called out according
to the player’s operating status.
1 Display the FUNCTION menu.
Press FUNCTION. (EX: BDMV Discs)
2 Select and set the item.
Use a/b to select, then press ENTER.
Note:
• Items that cannot be changed are displayed
in gray. The items that can be selected
depend on the player’s status.
* To change the setting of the selected item
Use c/d to change.
* To close the FUNCTION menu
Press FUNCTION.
* FUNCTION menu item list
04
Item
Description
Title
Display current title information.
Select your favorite title.
Chapter
Display current chapter information.
Select your favorite chapter.
File
Display current file information.
Select your favorite file.
Time
Display time of information. Select
your playing time.
Mode
Switch play mode.
Audio Language
Switch audio language in the
BD-ROM and DVD discs. Use /
selecting your language.
Angle
Switch the BD-ROM/DVD-Video
disc’s camera angles.
Subtitle Language
Switch Subtitle language.
Subtitle Style
Select subtitle style.
Code Page
Switch the subtitle code page.
Secondary Video
Open/Close Second Video.
Secondary Audio
Open/Close Second Audio.
Bitrate
Switch to Audio/Video Bitrate.
Still Off
Switch off the BD-ROM’s still picture.
Short Skip
Forward to a position 30 seconds
later.
Replay
Return to a position 10 seconds
earlier.
Slide Show
Switch the playback speed while
playing the picture slide show.
Transition
Change the style of the slide show
while playing the picture slide show.
Note
• The item of operating will be changed for
disc type. when the disc is only supported,
some item can be operated.
•The types of recorded secondary audio
streams depend on the disc and file.
•Some discs do not include secondary
audio/secondary video.
•In some cases, the secondary audio/
secondary video may switch or the
switching screen provided on the disc may
be displayed immediately, without the
current secondary audio/secondary video
or the total number of secondary audio/
secondary video streams recorded on the
disc being displayed.
•Secondary audio mark is displayed for
scenes at which secondary audio is
recorded if Angle/Secondary Indicator is
set to On.
23
04
Using the Play Mode
functions
Playing a specific title, chapter or track
(Search)
1 Press FUNCTION to display the Play
Mode screen.
2 Select the type of search.
Use a/b to select, then press ENTER.
3 Input the number.
Use the number buttons (0 to 9) or a/b to
input the number. Use c/d to move the
cursor.
• To search for title 32, input 3 and 2, then
press ENTER.
4 Starting playback from the specified
title, chapter or track.
Use c/d to select Search, then press ENTER.
Playing in random order (Random Play)
Use this procedure to play the tracks or files in
random order.
1 During playback, press FUNCTION to
display the Play Mode screen.
2 Select Normal/Random.
Use a/b to select, then press ENTER.
REPLAY SHORT SKIP
3 Select Random.
Use a/b to select, then press ENTER.
* To cancel Random Play
• Select Normal from the Random screen,
then press ENTER.
• During playback, press .
Note
• Random Play is canceled in the following
cases:
– When you use the search function.
– When you start Repeat Play.
24
Playing from the Home Media Gallery
The Home Media Gallery lets you display a list
of the titles, tracks or files recorded on the
disc. The discs that can be played from the
Home Media Gallery are as shown below (see
also page 7).
• BD-R/-RE discs
• DVD-R/-RW (VR format) discs
• Audio CD (CD-DA and DTS-CD)
• DVDs/CDs on which only data files of
video, image or audio files, etc. are recorded.
04
* Closing the Home Media Gallery
Press MEDIA GALLERY.
Notes:
• When playing an audio CD (CD-DA or
DTS-CD), the Now Playing screen is
displayed.
• Some BD-R/-RE discs have playback
protection. To cancel the protection, input
the password set for the disc.
Playing video files
1 Press MEDIA GALLERY to display the
Home Media Gallery.
2 Select discs or USB devices.
Use a/b to select, then press ENTER.
*UFN
)PNF.FEJB(BMMFSZ
64#7JEFP.1&(
4USFBNT
-BZFS
G
G
G
G
Notes:
•Depending on the connected devices and
conditions, some time may be required for
playback to start and for the image to
switch.
5ZQF.1
5PUBM5JNF
7JEFP3FTPMVUJPO
'SBNF3BUF
Media
Gallery
&YJU
3 Select [video] folders.
Use a/b to select video files, then press
ENTER.
Playing discs
1 Press MEDIA GALLERY to display the
Home Media Gallery.
2 Select discs.
Use a/b to select, then press ENTER.
*UFN
#%.7
64#
1MBZMJTU
)PNF.FEJB(BMMFSZ
5ZQF%JTD
4J[F.
'46%'
Media
Gallery
&YJU
3 Select folders.
4 Select titles.
Use a/b to select, then press ENTER.
4 Select the folder or containing the video
file you want to play.
Use a/b to select, then press ENTER.
• Folders - The files in the selected folder
are displayed.
• Video file - Playback starts video files.
Playback starts from the selected file, and
continues until the end of the list is reached.
Use / to play the previous or next file.
Notes:
• It may take a few seconds before playback
starts. This is normal.
• It may not be possible to play some files
properly.
• The number of views may be restricted.
Playback starts.
25
04 Playing image files
Playing audio files
1 Press MEDIA GALLERY to display the
Home Media Gallery.
1 Press MEDIA GALLERY to display the
Home Media Gallery.
2 Select discs or USB devices.
Use a/b to select, then press ENTER .
2 Select discs or USB devices.
Use a/b to select, then press ENTER .
3 Select [Image] folders.
Use a/b to select video files, then press
ENTER.
3 Select [Music] folders.
Use a/b to select video files, then press
ENTER.
4 Select the folder or containing the image
file you want to play.
4 Select the folder or containing the music
file you want to play.
Use a/b to select, then press ENTER.
• Folders - The files in the selected folder
are displayed.
• Image file - Playback starts slide show.
Use a/b to select, then press ENTER.
• Folders - The files in the selected folder
are displayed.
• Music file - Playback starts music.
Playback starts from the selected file, and
continues until the end of the list is reached.
Use / to play the previous or next file.
The now playing screen (shown below) is
display.
*UFN
)PNF.FEJB(BMMFSZ
64#1IPUP
"/&8@'0'POUUFTU
5ZQF+1(
4J[F.
7JEFP3FTPMVUJPO9
1MBZ
Media
Gallery
&YJU
A slide show starts from the selected file, and
continues until the end of the list is reached.
Use / to display the previous or next
file.
* About Slideshow
A display of the files on the disc or in the folder
that switches automatically.
26
5ZQF.1
5PUBM5JNF
5JNFBNBOUF
"SUJTU"NBEB
"MCVN
(FOSF
Playing in the desired order (Playlist)
* Deleting tracks/files from the Playlist
The discs that can add tracks and files to the
Playlist are as shown below.
•DVDs/CDs/USB devices on which audio
files are recorded.
1 Select the track/file to be deleted, then
press POP UP MENU to display the POP UP
MENU menu.
04
2 Use a/b to select Remove from Playlist,
then press ENTER.
* Adding tracks/files
Use this procedure to add tracks and files, and
create the Playlist.
1 Press HOME MEDIA GALLERY to
display the Home Media Gallery.
The Home Media Gallery can also be
displayed by selecting Home Media Gallery
from Home Menu, then pressing ENTER.
2 Select Disc or USB.
Load the disc beforehand.
Use a/b to select, then press ENTER.
3 Select the track/file to be added.
Use d to select.
4 Press POP UP MENU to display the POP
UP MENU menu.
5 Select Add to Playlist to add to Playlist.
Use a/b to select, then press ENTER.
The track or file selected in step 3 is added to
the Playlist.
•To add more tracks or files, repeat steps 3
to 5.
* Playing the Playlist
1 Press HOME MEDIA GALLERY to
display the Home Media Gallery.
The Home Media Gallery can also be
displayed by selecting Home Media Gallery
from Home Menu, then pressing ENTER.
2 Select Playlist.
Use a/b to select, then press ENTER.
3 Select the track/file to be played.
Use a/b to select, then press ENTER.
Playback starts from the selected track/file and
continues until the end of the list is reached.
Use o/p to play the previous or next
track/file. The Now Playing screen is
displayed.
27
Chapter 5
05
Advanced settings
General Setting
1 When playback is stopped or open Bluray disc player , display the Home Menu
screen.
Press HOME MENU.
2 Select and set Initial Setup.
Use a/b/c/d to select, then press ENTER.
3 Select the item and change the setting.
Use a/b/c/d to select, then press ENTER.
General Setting
System
Screen Saver
On
Language
Auto Power Off
Off
Playback
Disc Auto Playback
On
Parental Lock
Control with HDMI
On
Network
Setup Nevigator
More...
Use cursor key to move focus, use “Enter” key
to select
Exit
{10 min}, {20 min}, {30 min} - The power will
be automatically turned off if no operation has
been performed for more than 10 minutes/20
minutes/30 minutes.
• [Disc Auto Playback]
{On} - Turn on disc auto playback mode.
{Off} - Turn off disc auto playback mode.
• [Control with HDMI]
This player supports Easylink which uses the
HDMI CEC (Consumer Electronics Control)
protocol. You can use one single remote
control to control all HDMI CEC functions of
devices that are connected through HDMI
connectors.
{On} - Turn on HDMI CEC features.
{Off} - Turn off HDMI CEC features.
• [Setup Navigator]
Set BD player’s language, Resolution and
TV’S Aspect ratio.
• [Load Default]
Reset all settings of BD player to intial default
state.
- Follow the instruction on the TV screen to
confirm the default setting operation.
1. Select Load Default.
2. A dialog box pops up shown as below.
Select OK.
Load Default
Do you want to load default?
Return
* Closing the Initial Setup screen
Press HOME MENU.
Note:
• If the item is gray, then it cannot select.
OK
Cancel
3. Load Default it in progress, which may take
a while. Please wait...
Load Default
Loading default, please wait...
System
To change the following system option to
personalize your BD player.
4. When Load Default will be completed. TV
will display as follows:
QBHFὉ
• [Screen Saver]
Turn on or Off the screen saver mode. It helps
to protect the TV screen.
{ On } - Turn on the screen saver mode: the
screen saver mode will be automatic turn on
after 10 minutes no operating program.
{ Off } - Turn off the screen saver mode.
• [Auto Power Off]
{Off} - Select this if you do not want the power
to turn off automatically.
28
4FUVQ/FWJHBUPS
8FMDPNF
UPVTF#%1MBZFS4FUUJOH8J[BSE
4PNFTJNQMFTFUUJOHTBSFOFFEFECFGPSFZPVFOKPZJU
1MFBTFNBLFEFUBJMTFUUJOHTPGIPNFNFOVMBUFS
0,
/FYU
5. Press ENTER to enter language setting.
Press a/b select to language.
page:2/5
Setup Nevigator
Choose
an OSD language before starting.
中文(繁体)
English
The language selected will be applied not only here
but aslo in other OSD windows, menus etc.
Previous
OK
Next
6. Press ENTER to enter Resolution setting.
QBHFὉ
4FUVQ/FWJHBUPS
$IPPTF
BSFTPMVUJPOUIBUGJUZPVS57
$IBOHFXJMMCFBQQMJFEJNNFEJBUFMZZPVIBWFTUP
EFUFSNJOFXIFUIFSUPTBWFUIFTFUUJOHPSSPMMCBDLUP
QSJPSSFTPMVUJPO#FUUFSQFSGPSNBODFXJMMCFQSPWJEFE
CZB)%.*DPOOFDUJPO
ᒭү
JJ
QQ
Q
J
Q
1SFWJPVT
0,
/FYU
Press a/b to select an option. Press ENTER.
Use a/b to select an “Yes” or “No”.
QBHFὉ
7JEFP3FTPMVUJPO
IBTCFFODIBOHFE
4FUVQ/FWJHBUPS
T
%PFTFWFSZUIJOHMPDLTBMMSJHIUXJUIUIJTSFTPMVUJPO
1SFTT:FTJGZPVXBOUUPBQQMZJU1SFTT/PUP
SPMMCBDLUPQSFWJPVTPOF
:FT
8. Press ENTER to return Gereral Setting
05
Menu.
• [Upgrade]
You may select to Upgrade the software from
the USB flash drive.
1. Connect the USB flash drive which contains
the upgrade file package.
2. Follow the instruction on the TV screen to
confirm upgrade operation.
- Upgrade complete the software, the
system will reboot after 5s or Enter key is
pressed.
Notes:
• Do not unplug the power cord or remove
the USB flash drive/disc during software
updating. Also, do not press the reset button
during updating. Otherwise, the updating will
be aborted and malfunction may occur with
the player.
• If the upgrade file package did not pass
the verification, error prompt is displayed ,
check the package again (such as the
package is not complete)
• Make sure the firmware version is not an
old version.
• [BUDA]
During insert more than 1GB empty USB
device, you can operate BD-Live function.
And Blu-ray DVD system will be automatic
name a BUDA content.
BUDA will display Information.
1. Press ENTER.
2. Follow the instruction on the TV screen to
select {BUDA Information}.
/P
(FOFSBM4FUUJOH
1SFWJPVT
0,
/FYU
4ZTUFN
#6%"*OGPSNBUJPO
-BOHVBHF
7. Press ENTER to enter Aspect ratio setting.
QBHFὉ
$IPPTF
BOBTQFDUSFUJPUIBUGJUZPVS57
$IBOHFXJMMCFBQQMJFEJOOFYUQBHFZPVTIPVME
EFUFSNJOFXIFUIFSUPTBWFUIFTFUUJOHPSSPMMCBDLUP
QSJPSBTQFDUSBUJP
1SFWJPVT
4FUVQ/FWJHBUPS
'VMM
/PSNBM
-FUUFSCPY
0,
/FYU
4FUVQ/FWJHBUPS
/FUXPSL
'NUCVEB
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
&YJU
3FUVSO
3. Press ENTER to select “Fmt buda”, BUDA
of files will be cleaned.
• [Quick Start]
{ On } - Select to shorten the required time to
boot up.
{ Off } - Select to perform normal bootup.
Language
Select the OSD(On-Screen Display)
Language, Disc Menu Language, Audio
Language, Subtitle Language default
language for the player.
4FUUJOH
XJ[BSEJTUPCFGJOJTIFE
/PXQSFTT'JOJTICVUUPOUPHPUP)PNF.FOV1MFBTF
FOKPZJU
1SFWJPVT
'SFFTJ[F.#
1BSFOUBM-PDL
1BO4DBO
Press a/b to select an option. Press ENTER.
QBHFὉ
1MBZCBDL
0,
'JOJTI
29
05
(FOFSBM4FUUJOH
4ZTUFN
04%-BOHVBHF
-BOHVBHF
%JTD.FOV-BOHVBHF ˗஡
1MBZCBDL
"VEJP-BOHVBHF
˗஡
1BSFOUBM-PDL
4VCUJUMF-BOHVBHF
˗஡
&OHMJTI
/FUXPSL
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
3FUVSO
&YJU
• [OSD Language]
Select the default on-screen display
language.
• [Disc Menu Language]
Select the Disc Menu Language.
• [Audio Language]
Select the default audio language.
• [Subtitle Language]
Select the default subtitle language.
Playback
(FOFSBM4FUUJOH
4ZTUFN
"OHMF.BSL
0O
-BOHVBHF
1*1.BSL
0O
1MBZCBDL
4FDPOEBSZ"VEJP.BSL 0O
1BSFOUBM-PDL
-BTU.FNPSZ
0O
/FUXPSL
1#$.FOV
0O
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
&YJU
3FUVSO
• [Angle Mark]
Some DVDs/BDs contain the scenes
recorded with multiple angles, which allow
you to enjoy the videos with your desired
angles, therefore the angle mark is displayed
only when the
DVD/BD disc is supportable for multi-angle
and Angle Mark is set to ON.
{On} – Dispaly the angle mark.
{Off} –Hide the angle mark.
• [PIP Mark]
The Picture -In- Picture (PIP) mode display
two pictures on the TV screen at the same
time, the full screen picture is called Main
Window and the small inset windows is called
Sub Windows. The PIP mark is displyed when
in PIP mode and PIP Mark is set to ON.
{On} – Dispaly the PIP mark.
{Off} – Hide the PIP mark.
• [Secondary Audio Mark]
{On} – Dispaly Secondary Audio Mark.
{Off} – Hide the Secondary Audio Mark.
30
• [Last Memory]
If you open a disc or switch this player to
standby state during normal playback, the BD
Player can memory the end playing point, the
player will start playback from the memory
point next time.
{On} – Active Last Memory feature.
{Off} – Disable Last Memory feature.
Note:
• Not all Blu-ray Discs support the function.
• [PBC Menu]
VCD2.0 has PBC control (Playback Control)
menu, which allow you to interact with the
system via menu.
{On} – Open PBC and Display playback
control menu, use NUMBER keys to select
desired option.
{Off} – Close PBC and Hiden playback
control menu and start playback from track1
automatically.
• [DivX® VOD DRM]
Select DivX® VOD DRM option to see your
registration code in order to view DivX®
Video.
Parental Lock
(FOFSBM4FUUJOH
4ZTUFN
$IBOHF1BTTXPSE
.PSF
-BOHVBHF
1BSFOUBM$POUSPM
.PSF
1MBZCBDL
$PVOUSZ$PEF
.PSF
1BSFOUBM-PDL
/FUXPSL
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
3FUVSO
&YJU
• [Change password]
Follow the instruction on the TV set or change
the password for locked discs and play
restricted DVDs/BDs.
(FOFSBM4FUUJOH
4ZTUFN
-BOHVBHF
1MBZCBDL
$IBOHF1BTTXPSE
1MFBTFFOUFSDVSSFOUQBTTXPSEὉ
1BSFOUBM-PDL
/FUXPSL
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
&YJU
3FUVSO
1. Use number keys to enter four digit old
password.
2. Enter the new password.
General Setting
System
Change Password
Language
New password:
Playback
Parental Lock
• The ratings are country-depended. To
05
allow all disc to play, select ‘Off’.
• [Country Code]
This ensures you see the scenes intended for
your current residential region/country. Use
0-9 enter your password. Press a/b to select
the country code. And press ENTER to reture.
Network
Confirm password:
Network
Use cursor key to move focus, use “Enter” key
to select
Return
Exit
3. Enter the new password again to confirm.
• [Parental Control]
Restricts access to discs that are unsuitable
for children. These discs must be recorded
with rating.
1. Press ENTER.
2. Use number keys to enter the password.
(FOFSBM4FUUJOH
4ZTUFN
1BSFOUBM$POUSPM
-BOHVBHF
1MBZCBDL
&OUFS1BTTXPSEὉ
1BSFOUBM-PDL
/FUXPSL
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
3FUVSO
&YJU
3. Select a rating level, then press ENTER.
(FOFSBM4FUUJOH
4ZTUFN
-BOHVBHF
1BSFOUBM$POUSPM
4FMFDU-FWFMὉ
1MBZCBDL
1BSFOUBM-PDL
/FUXPSL
0GG
,*%4"'&
(2)G
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
4ZTUFN
*OUFSOFU$POOFDUJPO
-BOHVBHF
*OGPSNBUJPO
1MBZCBDL
$POOFDUJPO5FTU
1BSFOUBM-PDL
*14FUUJOH
/FUXPSL
#%-JWF$POOFDUJPO
&OBCMF
1FSNJUUFE
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
&YJU
3FUVSO
To setup the network connection, enjoy BDDVD additional content.
Note:
• Ensure that the network cable is properly
connected and the router is switched on.
1. Connect the disc player to the broadband
modem or router.
2. Insert a BD disc with Bonus View/BD-Live.
3. In the Setup menu, Select [Network], then
press d.
4. Select [IP Setting] in the menu, then press
ENTER to select [Auto]. An IP address is
obtained automatically.
If no IP address is obtained, select [Manual]
input IP Address, Subnet Mask, Default
Gateway, DNS and press ENTER to reconnect again to the network. It will be try to
obtain the IP address again.
5. Press [Return] or press ENTER to exit.
3FUVSO
&YJU
Items
(FOFSBM4FUUJOH
Description
Off
KID SAFE Safe for kids
G
All children and general guidance
PG
Parental guidance
PG-13
Parental guidance for children under 13
PGR
Parental guidance Recommended
R
Restricted viewing
NC-17
No one 17 and under allowed
ADULT
Adult only
Notes:
• Rated discs above the level you set in
[Parental Control] require a password to
be played
Notes:
• Use internet Connection between provider.
• This player does not support automatic
detection of cross-cables. Use the straight
(standard) LAN cable.
• Loading BD-Live content from the internet
may take some time, depending on the file
size and the speed of the internet
connection.
• [Information]
Display the Network Information page. In this
page, you can view the info of Interface,
Address Type, IP Address, Subnet Mask,
Default Gateway and DNS.
31
05 • [Connection Test]
Display network connection message.
• [IP Setting]
{Auto} – Auto obtain network information.
{Manual} – Manual setup network
information.
• [BD-Line Connection]
{Permitted} – During playback BD-Live disc,
the disc may automatically downloading all
information from appointed network.
{Partial Permitted} – During playback BDLive disc, the disc may automatically
downloading the part of information from
appointed network.
{Prohibited} – Disable downloading
information from network.
Video Output
1. Press HOME MENU.
[General Setting] menu is displayed.
2. Press d to select [Video Output], then
press b.
3. Select an option, press d to access.
7JEFP0VUQVU
%JTQMBZ4FUUJOH
57"TQFDU3BUJP
7JEFP1SPDFTT
7JEFP3FTPMVUJPO
Q
.PEF4FMFDUJPO
$PMPS4QBDF
:$C$S
)%.*%FFQ$PMPS
0GG
QPVUQVU
0O
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
&YJU
3FUVSO
4. Press a/b to select a setup option and
press d.
5. Select the setting you wish to change
and press OK to confirm.
- Press c to return to the previous menu.
- Press HOME MENU to exit the menu.
Display Setting
• [TV Aspect Ratio]
Select Video output Aspect Ratio according
to your TVs spec.
{16:9 Full} – Select this when connecting to a
wide (16:9) TV.
{16:9 Normal} – Select this when connected
to a wide (16:9) TV. 4:3 pictures are displayed
with vertical black bars along the sides.
{4:3 Pan&Scan} – Select this when
connecting to a 4:3 screen TV and playing a
16:9 video. The video will be played with the
left and right sides of the image cut off to
display on the 4:3 screen. (This function works
32
if the disc is labeled for 4:3PS.)
{4:3 Letterbox} – Select this when connecting
to a 4:3 screen TV and playing a 16:9 video.
The video will be played with black bands at
the top and bottom.
• [Video Resolution]
Select a video output resolution that is
compatible with your TV display capability.
{Auto} – Select the most suitable resolution
according to the input video.
{480I/576I},{480P/576P}, {720P}, {1080I},
{1080P} – Select a video resolution setting
that is best supported by the TV, See TV
manual for details.
• [Color Space]
Select a predefined color space of picture.
{RGB} – Select this to output the video
signals as RGB signals. Choose FULL RGB if
the colors seem too dense and all the dark
colors are displayed in a uniform black when
RGB is selected.
{YCbCr} – Select the video output YCbCr
color space.
{YCbCr422} – Select the video output
YCbCr422 color space
{Full RGB} – Select this to output the video
signals as RGB signals. Choose this if the
colors seem too faint and the black seems too
bright when FULL RGB is selected.
• [HDMI Deep Color]
This feature is available only when the display
device is connected by a HDMI cable, and
when it supports deep color feature.
{30 bits} – Output 30 bits color.
{36 bits} – Output 36 bits color.
{Off} – Output standard 24 bit color.
• [1080/24P output]
{On} – Enable to select this video resolution
setting.
{Off} – Disable to select this video resolution
setting.
About HDMI 1080p 24F Notes:
• If you want the 24Hz output, it should fulfill
below 3 conditions:
1.TV supports the 24Hz display:
2.Player choose the 24Hz option in the
setup menu;
3.Media must be the 24Hz video.
Notes:
• This resolution becomes effective only
when the playing BD-Disc contents are Film
source.
• During HDMI 1080p 24F playback, there
will be no composite output.
Video Process
7JEFP0VUQVU
%JTQMBZ4FUUJOH
7JEFP"EKVTU
.PSF
7JEFP1SPDFTT
4IBSQOFTT
.JEEMF
.PEF4FMFDUJPO
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
3FUVSO
&YJU
• [Video Adjust]
Select a predefined set of the video.
1. Press ENTER .
2. Press c/d to adjust the video
Brightness, Contrast, Hue and Saturation.
{Brightness}- press c/d to adjust the
brightness of display, goes left means dark
and right means bright
{Contrast}- press c/d to adjust the
contrast of display, goes left means low
contrast and right means high contrast.
{Hue}- press c/d to adjust the Hue of
display, goes left means low hue and right
means high hue.
{Saturation}- press c/d to adjust the
saturation of display, goes left means low
Saturation and right means high saturation.
3. Press HOME MENU to exit the menu.
Brightness
Contrast
• [Detail]
Select the output mode of video,options
include: Standard, Fine, Soft, these can
change the output display.
{Normal} output video signal without any
processing and in standard mode.
{Fine} output video signal in Fine mode.
{Soft} output video signal in Soft mode.
05
Audio Output
1. Press HOME MENU.
[General Setting] menu is displayed.
2. Press d to select [Audio Output],
then press b .
3. Select an option, press d to access.
"VEJP0VUQVU
"VEJP4FUUJOH
%JHJUBM0VUQVU
1$.
)%.*"VEJP
1$.
%PXO@TBNQ
,[
%3$
"VUP
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
&YJU
3FUVSF
4. Press a/b to select a setup option and
press d .
5. Select the setting you wish to change
and press OK to confirm.
- Press c to return to the previous menu.
- Press HOME MENU to exit the menu.
Audio Setting
Hue
Saturation
Change
Return
• [Sharpness]
Select the level of sharpness: High, Middle,
Low
{High} - Select High sharpness level.
{Middle} - Select Middle sharpness level.
{Low} - Select Low sharpness level.
Mode selection
7JEFP0VUQVU
%JTQMBZ4FUUJOH
%FUBJM
7JEFP1SPDFTT
.PEF4FMFDUJPO
• [Digital output]
Select the output mode of coaxial jack,
options include Bitstream, PCM, Auto and
Off.
{Bitstream} – output digital signal without any
processing.
{PCM} – output digital signal with processing,
only two channels export. When Connect a
HDMI cable from the HDMI OUTPUT jack on
this product to the HDMI input jack on the TV,
output multi channels export.
{Reencode} – When a BD containing
secondary audio and interactive audio is
played, the two audio signals are mixed and
converted to Dolby Digital audio or DTS audio
for output.
{Off} – Disconnet bit stream export.
6TFDVSTPSLFZUPNPWFGPDVTVTFþ&OUFSÿLFZ
UPTFMFDU
&YJU
3FUVSO
33
05 • [HDMI Audio]
Select the output mode of HDMI Digital Out
jack, options include Bitstream, PCM, Auto
and Off.
{Bitstream} – output HDMI digital signal
without any processing.
{PCM} – output digital signal with processing,
only two channels export.
{Reencode} – When a BD containing
secondary audio and interactive audio is
played, the two audio signals are mixed and
converted to Dolby Digital audio or DTS audio
for output.
{Off} – Disconnet bit stream export.
• [Max Sampling Frequency]
Select the digital audio signal sampling
frequency.
{48K}, {96K}, {192K} – Outputs audio signals
that are limited to a sampling frequency below
the set sampling frequency from the Digital
Out jack. Select according to the
performance of the connected device.
Note:
•When playing back a sampling frequency
file or a disk having a lower than or equal
setting compared to the present setting,
you can output it at the unchanged
sampling frequency.
•Sources with sampling frequencies of over
192 kHz cannot be played.
•When playing copyright-protected discs or
files, the signals are output with the
sampling frequency limited to 48 kHz or
below, regardless of this setting.
• [DRC]
{Off} – Select this to output audio signals
without using the DRC function.
{On} – Select this to adjust the range between
the loudest and softest sounds (dynamic
range) for playback at average volume. Use
this when it is hard to hear dialog or when
watching movies at midnight.
{Auto} – Select to switch the DRC setting On/
Off automatically according to the input audio
signal from the disc. This only affects Dolby
TrueHD signals.
34
Note:
•This affects such audio signals as Dolby
Digital, Dolby TrueHD, and Dolby Digital
Plus.
•DRC affects audio signals output from the
following audio output terminals:
– Analog audio signals output from the
AUDIO OUT terminals
– Linear PCM audio signals output from
the DIGITAL OUT or HDMI OUT
terminals
•Depending on the disc, the effect may be
weak.
•The effect may differ depending on the
speakers, the AV amplifier settings, etc.
• [Downmix]
{Stereo}-Surround audio signals converted to
linear PCM audio signals are converted into
2-channel (stereo) signals for output.
{Lt/R}-Surround audio signals converted to
linear PCM audio signals are converted into
2-channel signals compatible with Dolby
Surround for output (when the connected AV
receiver or amplifier, etc., is compatible with
Dolby Pro Logic, the AV receiver or amplifier
outputs the linear PCM audio signals as
surround audio signals).
System Information
1. Press HOME MENU.
[General Setting] menu is displayed.
2. Press d to select [System
Information],
- The current software version and MAC
address display
- Press c to return to the previous menu.
- Press HOME MENU to exit the menu.
System Information
Home Menu
Software Version: XXXXXXXXXXXX
MAC:XXXXXXXXXXXX
Use cursor key to move focus, use “Enter” key
to select
Exit
05
About how digital audio formats are output
Setting
Method of
conversion
Bitstream
Only the primary audio
(the main sound for
movies, etc.) is output.
The secondary audio
and interactive audio are
not output.
Output
terminal(s)
HDMI OUT
terminal
DIGITAL
OUT
terminal
PCM
The primary audio,
secondary audio and
interactive audio are
converted into PCM
audio and output
simultaneously.1
HDMI OUT
terminal
DIGITAL
OUT
terminal
Reencode
The primary audio,
secondary audio and
interactive audio are
converted into PCM
audio then converted
again into Dolby Digital
audio or DTS audio and
output simultaneously.2
HDMI OUT
terminal
DIGITAL
OUT
terminal
Dolby
Digital
Dolby
Digital
AUDIO
OUTPUT
terminal
Audio type
Dolby Digital
Dolby Digital
Plus
Dolby TrueHD3
DTS Digital
Surround
DTS-HD High
Resolution
Audio3
DTS-HD
Master Audio3
PCM
AAC
Dolby
Dolby
Digital
Digital
Dolby
Dolby
Digital Plus
Digital
Dolby
Dolby
TrueHD
Digital
DTS Digital DTS Digital
Surround Surround
PCM 5.1ch
PCM 7.1ch
PCM 7.1ch
PCM 5.1ch
DTSPCM 2ch4
HD High DTS Digital
DTS Digital DTS Digital
PCM 7.1ch
Resolution Surround
Surround Surround
Audio
DTS-HD
Master
Audio
DTS Digital
PCM 7.1ch
Surround
PCM 7.1ch PCM 2ch4 PCM 7.1ch
AAC
2ch4
AAC
PCM 5.1ch
Dolby
Digital
AAC
Dolby
Digital
AAC
1 In case of Quick View (Quick view with audio), the audio output will be equal to the PCM setting
regardless of any other settings. The LFE channel, however, is not output (5.1 → 5.0, 7.1 → 7.0).
2 If there is no secondary audio or interactive audio, depending on the disc the signals may be output
without being reencoded.
3 Quick View (Quick view with audio) function cannot be performed.
4 For multi-channel audio, the sound is converted into 2-channel audio for output.
Note:
•Depending on the disc, the number of channels may differ.
•Depending on the connected HDMI device, the HDMI output audio and number of channels
may differ.
•The HDMI output audio and number of channels may differ when Resolution is set to 480I or
480P, as well as when set to Auto if the connected device only supports 480i/480p.
•Three types of audio are recorded on BD video discs.
– Primary audio: The main sound.
– Secondary audio: Additional sound added supplementarily, such as comments by
directors, actors, etc.
– Interactive audio: Sounds such as clicks heard when operations are performed. The
interactive audio differs from disc to disc.
35
Chapter 6
06
Additional information
Cautions on use
Moving the player
If you need to move this unit, first remove the
disc if there’s one loaded, and close the disc
tray. Next, press  STANDBY/ON to switch
the power to standby, checking that the
POWER OFF indication on the front panel
display goes off. Wait at least 10 seconds.
Lastly, disconnect the power cord.Never lift or
move the unit during playback — discs rotate
at a high speed and may be damaged.
Place of installation
Select a stable place near the TV and AV
system to which the unit is connected.Do not
place the player on top of a TV or color
monitor. Keep it away from cassette decks or
other components easily affected by
magnetism.Avoid the following types of places:
Places exposed to direct sunlight
Humid or poorly ventilated places
Extremely hot or cold places
Places subject to vibration
Places in which there is much dust or
cigarette smoke
Places exposed to soot, steam or heat (in
kitchens, etc.)
this happens, turn the player’s power off. In
the same way, noise may be heard in the
sound of a radio.
About Condensation
If the player is moved suddenly from a cold
place into a warm room (in winter, for
example) or if the temperature in the room in
which the player is installed rises suddenly
due to a heater, etc., water droplets
(condensation) may form inside (on operating
parts and the lens). When condensation is
present, the player will not operate properly
and playback is not possible. Let the player
stand at room temperature for 1 or 2 hours
with the power turned on (the time depends on
the extent of condensation). The water
droplets will dissipate and playback will
become possible.Condensation can also occur
in the summer if the player is exposed to the
direct wind from an air-conditioner. If this
happens, move the player to a different place.
Cleaning the player
* Keep away from heat
Do not place the player on top of an amplifier
or other device generating heat. When
installing in a rack, to avoid the heat generated
by the amplifier and other devices, place it on
a shelf below the amplifier whenever possible.
Normally, wipe the player with a soft cloth. For
tough dirt, apply some neutral detergent
diluted in 5 to 6 parts water to a soft cloth,
wring out thoroughly, wipe off the dirt, then
wipe again with a dry cloth.
Note that getting alcohol, thinner, benzene or
insecticide on the player could cause the print
and coating to peel off. Also, avoid leaving
rubber or vinyl products in contact with the
player for long periods of time, as this could
damage the cabinet.
When using chemical-impregnated wipes, etc.,
read the wipe’s cautions carefully.Unplug the
power cord from the power outlet when
cleaning the player.
Turn the power off when not using the
player
Caution for when the unit is installed in a
rack with a glass door
Depending on the conditions of the TV
broadcast signals, striped patterns may
appear on the screen when the TV is turned
on while the player’s power is turned on. This
is not a malfunction with the player or TV. If
Do not press the  OPEN/CLOSE on the
remote control to open the disc tray while the
glass door is closed. The door will hamper the
movement of the disc tray, and the unit could
be damaged.
* Do not place objects on top
Do not place objects on top of the player.
* Do not obstruct the ventilation holes
Do not use the player on a shaggy rug, bed, or
sofa, and do not cover the player with a cloth,
etc. Doing so will prevent heat dissipation and
could lead to damage.
36
Cleaning the pickup lens
The player’s lens should not become dirty in
normal use, but if for some reason it should
malfunction due to dust or dirt, consult your
nearest Pioneer authorized service center.
Although lens cleaners for players are
commercially available, we advise against
using them since some may damage the lens.
Handling discs
Do not use damaged (cracked or warped)
discs.Do not scratch the disc’s signal surface
or let it get dirty.Do not load more than one
disc into the player at a time.
Do not glue paper or put stickers onto the disc,
or use a pencil, ball-point pen or other sharptipped writing instrument. These could all
damage the disc.
* Storing discs
Always store discs in their cases, and place
the cases vertically, avoiding places exposed
to high temperature or humidity, direct sunlight
or extremely low temperatures.Be sure to read
the cautions included with the disc.
* Cleaning discs
It may not be possible to play the disc if there
are fingerprints or dust on it. In this case, using
a cleaning cloth, etc., to wipe the disc gently
from the center toward the outer edge. Do not
use a dirty cleaning cloth.
06
Do not use benzene, thinner or other volatile
chemicals. Also do not use record spray or
antistatic agents.For tough dirt, apply some
water to a soft cloth, wring out thoroughly,
wipe off the dirt, then wipe off the moisture
with a dry cloth.
* Specially shaped discs
Specially shaped discs (heart-shaped,
hexagonal, etc.) cannot be used on this player.
Never use such discs, as they will damage the
player.
* Condensation on discs
If the disc is moved suddenly from a cold place
into a warm room (in winter, for example),
water droplets (condensation) may form on the
disc surface. Discs will not play properly if
there is condensation on them. Carefully wipe
off the water droplets from the disc surface
before using the disc.
37
06
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie in
another component. Inspect the other components and electrical appliances being used. If the
trouble cannot be rectified even after checking the points below, ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
Playback
Problem
Check
Remedy
• Disc does not play.
• Disc tray opens
automatically.
Is the disc one that is playable on
this player?
Check whether the disc is one that can
be played on this player (page 7).
Is the file one that is playable on this
player?
• Check whether the file is one that can
be played on this player (page 9).
• Check whether or not the file is
damaged.
Is the disc scratched?
It may not be possible to play scratched
discs.
Is the disc dirty?
Clean the disc (page 37).
Is there a piece of paper or sticker
attached to the disc?
The disc may be warped and unplayable.
Is the disc properly set in the disc
tray?
• Set the disc with the printed side facing
up.
• Set the disc properly in the depression
in the disc tray.
Is the region number correct?
See About region numbers on page 7 for
the region numbers of discs that can be
played on this player.
Is the HDMI cable properly
connected?
• Connect the cable properly according to
the connected devices (page 13).
• Insert the cable firmly and all the way in.
Is the HDMI cable damaged?
If the cable is damaged, replace it with a
new one..
Is the input setting on the connected
TV or AV receiver or amplifier right?
Read the operating instructions of the
connected components and switch to the
proper input.
Is the output video resolution
properly set?
Use HDMI to switch to a resolution at
which the video and audio signals are
output.
Is the player connected with an
HDMI cable other than a High Speed
HDMI®/™ cable (with a Standard
HDMI®/™ cable)?
Connect the player to the TV using a
High Speed HDMI®/™ cable.
Is a DVI device connected?
The picture may not be displayed
properly if a DVI device is connected.
Is HDMI Color Space properly set?
Change the HDMI Color Space setting.
No picture is displayed
or the picture is not
displayed properly.
Playback stops.
38
• Playback may stop if the unit is subject to shocks or set in an unstable place.
• Playback may stop when a USB device is connected or disconnected during
playback. Do not connect or disconnect USB devices during playback.
Problem
Check
Picture freezes and the
front panel and remote
control buttons stop
working.
• Picture is stretched.
• Picture is cropped.
• Aspect ratio cannot
be switched.
06
Remedy
• Press  to stop playback, then restart
playback.
• If the playback cannot be stopped,
press  STANDBY/ON on the player’s
front panel to turn off the power, then turn
the power back on.
• If the power cannot be turned off (set to
standby), use a thin rod to press the reset
button on the main unit’s front panel. The
unit restarts, at which point it is again
operable.
Is the TV’s aspect ratio properly set?
Read the TV’s operating instructions and
set the TV’s aspect ratio properly.
Is TV Aspect Ratio properly set?
Set TV Aspect Ratio properly.
When video signals with a resolution of
1080i, 1080p or 720p are being output
from the HDMI OUT terminal, they may
be output with an aspect ratio of 16:9
even if TV Aspect Ratio is set to 4:3.
Picture is interrupted.
The picture may be interrupted when the
resolution of the recorded video signal
switches. Press HDMI to select a setting
other than Auto or Source Direct.
The subtitles cannot
be switched.
The subtitles cannot be switched for
discs recorded on a DVD or BD recorder.
Sound and picture are
not synchronized.
Is Output Terminal properly set?
Set Output Terminal properly.
• No sound is output.
• Sound is not output
properly.
Is the disc played back in slow motion?
Is the disc played back in fast
forward or fast reverse?
No sound is output during slow motion
play and forward and reverse scanning.
Are the audio cables properly
connected?
• Connect the cable properly according
to the connected devices (page 15)
• Insert the cable firmly and all the way in.
Is the audio cable damaged?
If the cable is damaged, replace it with a
new one.
Are the connected components (AV
receiver or amplifier, etc.) properly
set?
Read the operating instructions of the
connected components and check the
volume, input, speaker settings, etc.
Is HDMI Audio Out properly set?
Set HDMI Audio Out to Auto or PCM.
Is a DVI device connected?
The sound will not be output from the
HDMI OUT terminal if a DVI device is
connected. Connect the device to a
DIGITAL OUT terminal or the AUDIO
OUT terminals.
For some BDs, audio signals are only
output from DIGITAL OUT terminal or the
HDMI OUT terminal.
39
06
Problem
Check
Remedy
Multi-channel sound
is not output.
Is the audio output of
the connected AV
receiver or amplifier,
etc., properly set?
Read the operating instructions of the connected AV
receiver or amplifier and check the audio output settings
of AV receiver or amplifier.
Is multi-channel sound
selected?
Use the menu screen or AUDIO to switch the disc’s
sound to multi-channel.
Is the connected AV
receiver or amplifier
compatible with DTS
Digital Surround?
If an AV receiver or amplifier that is not compatible with
DTS Digital Surround is connected to the DIGITAL OUT
terminal, set DTS Digital Surround and HDMI Surround
to PCM.
Noise can be heard
when outputting
DTS Digital
Surround signals
from the DIGITAL
OUT terminal.
• Copyright-protected audio is converted to 48 kHz or
less before output.
• Set Max Sampling Frequency to 96 kHz or 192 kHz.
192 kHz or 96 kHz
digital audio signals
cannot be output
from the DIGITAL
OUT terminal.
Secondary audio or
interactive audio is
not output.
Is HDMI Audio properly
set?
When listening to the sound from an HDMI OUT
terminal, set HDMI Audio to PCM.
Are Digital Output
properly set?
When listening to the sound from an DIGITAL OUT
terminal, set Digital Output to Re-encode or PCM.
After a disc is
inserted, Loading
stays displayed and
playback does not
start.
Are there too many files
recorded on the disc?
When a disc on which files are recorded is inserted,
depending on the number of files recorded on the disc,
loading may take several dozen minutes.
■ is displayed in file
names, etc.
The characters that cannot be displayed on this player
are displayed in ■. When you are input characters via
media and peripheral equipment ,etc. The characters
which include simplified character of part or all simplified
character is no true display.
A message
indicating low
memory appears
while playing a
BD-ROM disc.
• Connect a USB device.
• Erase the data stored on the connected USB device
from BUDA Setup.
HDMI CEC function
does not work.
40
Is the HDMI cable
properly connected?
To use the Control function, connect the Flat Screen TV,
and AV system (AV receiver or amplifier, etc.) and HD
AV Converter to the HDMI OUT terminal.
Is the HDMI cable you
are using a High Speed
HDMI®/ TM Cable?
Use a High Speed HDMI®/ TM Cable. The Control function
may not work properly if an HDMI cable other than a
High Speed HDMI®/ TM Cable is used.
Is HDMI CEC set to On
on the player?
Set HDMI CEC to On on the player.
Does the connected
device support the
HDMI CEC function?
• The HDMI CEC function will not work with devices of
other brands that do not support the HDMI CEC function,
even when connected using an HDMI cable.
• The HDMI CEC function will not work if devices that do
not support the HDMI CEC function are connected
between the HDMI CEC-compatible device and the
player.
• See About connections to components of other makes
supporting the HDMI CEC function on page13.
• Even when connected to a Pioneer product compatible
with the HDMI CEC function, some of the functions may
not work. Also refer to the operating instructions of the
connected device.
Problem
06
Check
Remedy
Is HDMI CEC set to
On on the connected
device?
Set HDMI CEC to On on the connected device. The HDMI
CEC function operates when HDMI CEC is set to On for all
devices connected to the HDMI OUT terminal. Once
connections and settings of all the devices are finished, be
sure to check that the player’s picture is output to the Flat
Screen TV. (Also check after changing the connected
devices and connecting and/or disconnecting HDMI
cables.) If the player’s picture is not being output to the Flat
Screen TV, the HDMI CEC function may not work properly.
For details, refer to the operating instructions of the
connected device.
Are multiple players
connected?
The HDMI CEC function may not work if 4 or more players,
including this player, are connected by HDMI cable.
Network
Problem
Check
Remedy
• Check your network connection or confirm your network
settings.
• The USB flash drive of files have been cleaned.
• Confirm BD-ROMs to support BD-Live function.
BD-LIVE function
(connection to the
Internet) cannot be
used.
Is “Network is
FAILED.”
displayed?
• Check that this player and the Ethernet hub (or router
with a hub functionality) are properly connected.
• If the IP address is obtained using the DHCP server
function, check the setting is correct at the Information. For
details on the DHCP server function, see the operating
instructions for the Ethernet hub (or router with a hub
functionality).
• Set the IP address manually.
• Check the operation and settings of the DHCP server
function of the Ethernet hub (or router with hub
functionality). For details on the DHCP server function, see
the operating instructions for the Ethernet hub (or router
with a hub functionality).
• If this player has been set manually, reset the IP address
of this player or other components.
Is the Ethernet hub
(or router with a
hub functionality)
operating properly?
• Check the settings and operation the Ethernet hub (or
router with a hub functionality). For details, see the
operating instructions for the Ethernet hub.
• Reboot the Ethernet hub (or router with a hub
functionality).
Problem
Check
Remedy
The player’s power
turns off automatically.
Is HDMI CEC set
to On?
The player’s power may turn on together with the power of
the TV connected to the HDMI OUT terminal. If you do not
want the player’s power to turn off when the TV’s power is
turned on, set HDMI CEC to Off.
Is Auto Power Off
set to 10 min/20
min/30 min?
If Auto Power Off is set to 10 min/20 min/30 min, the
player’s power turns off automatically if no operation is
performed for over 30 minutes.
Is HDMI CEC set
to On?
The player’s power may turn on together with the power of
the TV connected to the HDMI OUT terminal. If you do not
want the player’s power to turn off when the TV’s power is
turned on, set HDMI CEC to Off.
A message other than
“Networks is OK.” is
displayed when
Connection Test is
performed.
Others
The player’s power
turns on automatically.
41
06
Problem
Check
Remedy
• Use within the specified usage temperature range.
• If the power cannot be turned off (set to standby), use a
thin rod to press the reset button on the main unit’s front
panel. The unit restarts, at which point it is again operable.
This unit cannot be
operated.
Are you operating
the remote control
from a point too far
away from the
player?
Operate from within 7 m of the remote control sensor.
Are the batteries
dead?
Replace the batteries.
Input of connected TV,
and AV system and HD
AV Converter switches
automatically.
Is HMDI CEC set
to On?
The input of the TV, and AV system (AV receiver or
amplifier, etc.) and HD AV Converter connected to the
HDMI OUT terminal may automatically switch to the player
when playback starts on the player or the menu screen
(Home Media Gallery, etc.) is displayed. If you do not want
the inputs of the connected TV, and AV system (AV
receiver or amplifier, etc.) and HD AV Converter to switch
automatically, set HDMI to Off.
Settings you have
made have been
cleared.
• Have you
disconnected the
power cord while
the player’s power
was on?
• Has there been a
power failure?
Always press  STANDBY/ON on the player’s front panel
or  STANDBY/ON on the remote control and check that
POWER OFF has turned off from the player’s front panel
display before disconnecting the power cord. Be
particularly careful when the power cord is connected to
the AC outlet on another device because the player turns
off in conjunction with the device.
USB (external storage)
device does not work
with this player
properly.
Is the USB device
properly
connected?
• Turn the player’s power off, then turn the power back on.
• Turn the player’s power off, then reconnect the external
storage device.
Is the USB device
connected via an
extension cable?
Do not use an extension cable. The player may not work
properly with it.
Is the external
storage device
connected to the
USB port via a
memory card
reader or USB
hub?
External storage device may not work if connected to the
USB port via a memory card reader or USB hub.
Does the external
storage device
contain multiple
partitions?
External storage devices may not be recognized if they
contain multiple partitions.
Player cannot be
operated with remote
control.
Some external storage devices may not operate.
Is the external
storage device
write-protected?
Turn the player’s power off, then disable the writeprotection.
Is the external
storage device’s
file system FAT32,
FAT16 or NTFS?
USB devices formatted in the FAT32, FAT16 or NTFS file
system can be used.
Turn the player’s power off, then turn the power back on.
42
Glossary
06
* Angle (Multi angle)
Up to 9 camera angles can be recorded
simultaneously on BD-ROM or DVD-Video
discs, letting you view the same scene from
different angles.
* Dolby Digital
Dolby Digital is an audio format to record the
sound in up to 5.1 channels with a fraction of
the amount of data as compared to linear PCM
audio signals.
* AVCHD (Advanced Video Codec High
Definition)
See page 4.
* Dolby Digital Plus
Dolby Digital Plus is an audio format for highdefinition media. Built on Dolby Digital, it
combines the efficiency and flexibility to
provide high quality multi-channel audio. With
BD-ROMs, up to 7.1 channels of digital sound
can be recorded.
* BDAV
Of the BD format, the Audio Visual Format
Specifications for HD digital broadcast
recording is referred to as BDAV on this player
and in this operating instructions.
* BD-LIVE
See page 4.
* BDMV
Of the BD format, the Audio Visual Format
Specifications designed for pre-packaged high
definition (HD) movie contents is referred to as
BDMV on this player and in this operating
instructions.
* BONUSVIEW
See page 4.
* Deep Color
See About HDMI on page13.
* Default Gateway
A default gateway is a communication device
such as a router which passes data between
networks. It is used to direct data to networks
on which the destination gateway is not
explicitly specified.
* Dolby TrueHD
Dolby TrueHD is an audio format using
lossless coding. With BD-ROMs, up to 8
channels can be recorded at 96 kHz/24 bits, or
up to 6 channels at 192 kHz/24 bits.
* DRM
A technology for protecting copyrighted digital
data. Digitized videos, images and audio retain
the same quality even when they are copied or
transferred repeatedly. DRM is a technology
for restricting the distribution or playback of
such digital data without the authorization of
the copyright holder.
* DTS Digital Surround
DTS Digital Surround is an audio format to
record 48 kHz/24 bits audio signals in 5.1
channels.
* DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is an audio
format using lossy coding. It can record 7.1
channels at 96 kHz/24 bits.
* DHCP (Dynamic Host Configuration
Protocol)
This protocol provides configuration
parameters (IP address, etc.) for computers
and other devices connected to the network.
* DTS-HD Master Audio
DTS-HD Master Audio is an audio format
using lossless coding. With BD-ROMs, 7.1
channels can be recorded at 96 kHz/24 bits, or
5.1 channels at 192 kHz/24 bits.
* DivX
See page 4.
* Ethernet
A standard for local area networks (LANs)
used to connect multiple computers, etc. in the
same location. This player supports
10/100BASE-TX.
* DNS (Domain Name System)
This is a system for associating Internet host
names with IP addresses.
43
06 * Frames and fields
A frame is the unit for one of the still pictures
which compose motion pictures. One frame
consists of a picture of odd lines and a picture
of even lines called fields in video signal with
interlaced scan method (576i, 1080i, etc.).
* HDMI (High-Definition Multimedia
Interface)
See page 3.
* Interactive audio
The audio signals recorded in the titles of BDROMs. They include for example the clicking
sound made when the menu screen is
operated.
* Interlaced scan
With this method, one picture is displayed by
scanning it twice. The odd lines are displayed
in the first pass, the even lines are displayed in
the second, to form a single picture (frame).
Interlaced scan is indicated in this player and
operating instructions by an “i” after the
resolution value (for example, 576i).
* IP address
An address that identifies a computer or other
device connected to the Internet or local area
network. It is represented a number in four
sections.
* PCM
This is referred as the audio signals that are
not compressed.
* MAC (Media Access Control) address
A hardware identification number assigned
specifically to the network device (LAN card,
etc.).
* MPEG (Moving Picture Experts Group)
The name of a family of standards used to
encode video and audio signals in a digital
compressed format. The video encoding
standards include MPEG-1 Video, MPEG-2
Video, MPEG-4 Visual, MPEG-4 AVC, etc.
The audio encoding standards include MPEG1 Audio, MPEG-2 Audio, MPEG-2 AAC, etc.
* Parental Lock
See Changing the Parental Lock level for
viewing DVDs and Changing the Age
Restriction for viewing BD-ROMs on page 30.
44
* Picture-in-Picture (P-in-P)
This is a function for superimposing a sub
video on the main video. Some BD-ROMs
include secondary video, which can be
superimposed on the primary video.
* Port number
This is a sub-address provided below the IP
address for simultaneously connecting to
multiple parties during Internet
communications.
* Progressive scan
With this method, one picture is consisted of a
single picture, without dividing it in two
pictures. Progressive scan provides clear
pictures with no flicker, in particular for still
pictures that contain much text, graphics, or
horizontal lines. Progressive scan is indicated
in this player and operating instructions by a
“p” after the resolution value (for example,
576p).
* Region number
See About region numbers on page 8.
* Secondary audio
Some BD-ROMs include sub audio streams
mixed with the main audio stream. These sub
audio streams are called “secondary audio”.
On some discs this secondary audio is
recorded as the audio for the secondary video.
* Secondary video
Some BD-ROMs include sub videos
superimposed on the main videos using the
Picture-in-Picture function. These sub videos
are called “secondary video”.
* Subnet mask
This is used to identify which part of the IP
address corresponds to the subnet (a
separately managed network). The subnet
mask is expressed as ‘255.255.255.0’.
* USB(Universal Serial Bus)
USB is the industry standard for connecting
peripherals to PCs.
* x.v.Color
See page 4.
Specifications
06
Model
BDP-3130
Type
Blu-ray Disc PLAYER
Rated voltage
AC 110 V to 240 V
Rated frequency
50 Hz/60 Hz
Power consumption
13 W
Power consumption
(standby)
0.3 W
Power consumption
(quick start)
4W
Weight
1.2 Kg
External dimensions
(including projecting parts)
360 mm (W) X 39 mm (H) X 208 mm (D)
Tolerable operating
temperature
+5 °C to +35 °C
Tolerable operating humidity
5 % to 85 % (no condensation)
Output terminals
1set, 19pin: 5 V, 250 mA
HDMI
Audio
outputs
Digital
audio
outputs
2-channel (left/
right)
1set, RCA jack
Audio output level
200 mVrms (1 kHz, -20 dB)
Frequency
response
4 Hz to 88 kHz (192 kHz sampling)
Coaxial
1 set, Coaxial digital jack
LAN
1set, Ethernet jack (10BASE-T/
100BASE-TX)
USB
1 set, Type A
Notes:
• The specifications and design of this product are subject to change without notice.
• This item incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are prohibited.
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by
copyright protection systems and the picture will be distorted on the television.
• Corporation and product names mentioned herein are trademarks or registered trademarks
of the respective corporations.
45
06
46
06
47
Please refer to our website for information regarding software updates and service to this product.
Contact information:
U.K.
http://www.pioneer.co.uk/uk/content/support/support/upgrade.html
http://www.pioneer.eu/support
Australia, New Zealand and other Oceania area
http://www.pioneer.com.au
Hong Kong
Pioneer (HK) Limited - Customer Service Center
Unit 2, 17/F, Vanta Industrial Centre, 21-33 Tai Lin Pai Road, Kwai Chung, Hong Kong
(852) 3583 3288
https://www.pioneerhongkong.com.hk
Singapore
Pioneer Electronics AsiaCentre Pte Ltd
253 Alexandra Road (Komoco Building)#04-01, Lobby 2 Singapore 159936
(65) 6472-7555
http://www.pioneer.com.sg/firmwaredownload
Malaysia
Pioneer Technology (Malaysia) Sdn Bhd
16th Floor, Menara Uni. Asia, 1008, Jalan Sultan Ismail 50250, Kuala Lumpur, Malaysia
(03) 2697-2920
http://www.pioneer.com.sg/firmwaredownload
Thailand
Pioneer Electronics (Thailand) CO.,LTD
91/1 Floor 1&7 Chaiyo Building, Rama 9 Road, Huaykwang District Bangkok 10320, Thailand
(662) 6439-444
http://www.pioneer.com.sg/firmwaredownload
Taiwan
Pioneer High Fidelity Taiwan Co. Ltd
13th Floor, No.44, Chung Shan North Road, Sec.2 Taipei, Taiwan
(886 2) 2521-3166
http://www.pioneer-twn.com.tw
Indonesia
PT. Adab Alam Electronic
Jl. K.H. Zainul Arifin No. 13A Jakarta-Pusat Indonesia
(21) 6331-924
http://www.pioneer.com.sg/firmwaredownload
© 2014 PIONEER HOME ELECTRONICS CORPORATION.
All rights reserved.
72-BD3130-GBRB1
PIONEER HOME ELECTRONICS CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270
K002_B3_En
Printed in China
<72-BD3130-GBRB1>
Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Download PDF

advertisement