Crib Attachment - Fisher

Crib Attachment - Fisher
Please keep this instruction sheet for future reference,
as it contains important information.
Requires four “AA” batteries for operation (included).
Batteries included are for demonstration purposes only.
Adult assembly is required for crib attachment and battery replacement.
Tool required: Phillips screwdriver (not included).
To clean, wipe the surface of this toy with a damp cloth. Do not immerse this toy.
Do not drop this toy on a hard surface.
This toy has no consumer serviceable parts. Please do not take this toy apart.
Battery Safety
1,5V x 4
“AA” (LR6)
For best performance, we recommend replacing the batteries that
came with this toy with four, new
“AA” (LR6) batteries.
• Locate the battery compartment on
the back of the toy.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver and remove the door.
Remove the exhausted batteries
and dispose of them properly.
• Insert four, new “AA” (LR6)
alkaline batteries.
• Replace the battery compartment
door and tighten the screws. Do not
• If this toy begins to operate erratically, you may need to reset the
electronics. Slide the power/volume
switch off and back on.
• If sounds or lights become faint or
stop, it's time for an adult to change
the batteries.
• Protect the environment by
not disposing of this product
with household waste
(2002/96/EC). Check your
local authority for recycling
advice and facilities.
In exceptional circumstances,
batteries may leak fluids that can
cause a chemical burn injury or
ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the product.
Dispose of batteries safely. Do not
dispose of product in a fire. The
batteries inside may explode or leak.
• Never short-circuit the
battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
Crib Attachment
Prevent Entanglement Injury
• This product may not
attach to all crib designs.
Do not add additional strings
or straps to attach to a crib
or playpen.
• Use ONLY attached to a crib
or playpen.
IMPORTANT! Always use the straps
provided to attach this toy to a crib.
Crib Rail
• Slide the end of the attachment strap
through the slot on the back of the
toy. Pull the end of the attachment
strap up and fasten to the slot on the
peg on the back of the toy.
Note: This toy should be snug against
the crib rail and spindles. Use the
strap slot that provides the tightest fit.
• Position the toy inside the crib.
• Wrap the toy’s attachment strap
around the crib top rail.
Crib Attachment
• If you have excess strap, slide the
free end of the attachment strap
under the slot at the top of the
attachment strap.
of Toy
• Wrap the toy’s strings around the
crib spindles and tie in a knot.
Note: It is better to tie the strings in
a knot than a bow, since a bow may
be easily untied.
At least
7 inches
(18 cm)
• If the distance between the bottom
of the toy and the mattress is less
than 7 inches (18 cm), lower the
crib mattress.
Gentle Soothing
Press to scroll through
music choices
Power/Volume Switch
• Slide to ON with low volume
ON with high volume
or OFF
Mode Switch
• Slide to choose:
Music Only
Plays up to 20 minutes
of lullabies.
Music and Lights
Plays music along with
a light show.
Sounds and Lights
Plays ocean sounds and
displays soothing lights.
Hint: This product automatically goes
into sleep mode after approximately
20 minutes. Press the start button on
the front of the toy to restart music/
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2;
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
This Class B digital apparatus
complies with Canadian ICES-003.
Operation is subject to the following
two conditions: (1) this device may
not cause harmful interference and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
Cet appareil numérique de la classe
B est conforme à la norme NMB-003
du Canada. L’utilisation de ce dispositif
est autorisée seulement aux conditions
suivantes : (1) il ne doit pas produire
de brouillage et (2) l’utilisateur du
dispositif doit être prêt à accepter tout
brouillage radioélectrique reçu, même
si ce brouillage est susceptible de
compromettre le fonctionnement
du dispositif.
FCC Statement (United States Only)
This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the
receiving antenna.
• Increase the separation between the
equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
© Disney/Pixar
©2012 Mattel. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, except as noted.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF