HP 2510 Switch Series
QuickSpecs
HP 2510 Switch Series
Overview
HP 2510 Switch Series (Retired)
HP 2510 Switch Series
Models
HP 2510-48 Switch
HP 2510-24 Switch
J9020A
J9019B
Key features





Managed Layer 2 feature set
24 or 48 10/100 ports
Two mini-GBIC slots for fiber connectivity
Quiet fanless design (J9019B)
Industry-leading warranty
Product overview
Designed to provide essential solutions to small and medium businesses, the HP 2510 Switch Series consists of two Layer 2managed switches that provide reliable 10/100 connectivity. Building off of the popularity of the HP 2510-24 Switch, a 24-port
10/100 switch with two dual-personality ports, the 2510 switch series has expanded to include a higher-density HP 2510-48
Switch, with 48 10/100 ports and four Gigabit Ethernet uplinks.
Features and Benefits
Quality of Service (QoS)

IEEE 802.1p prioritization: delivers data to devices based on the priority and type of traffic
Connectivity



10/100 and 10/100/1000 connectivity: provides customers with the choice of selecting the network connectivity speed
that best meets their needs, with a consistent user experience
Gigabit uplinks:
o 2510-24 and 2510-48 switches: the 2510-24 switch has two dual-personality ports for either 10/100/1000 or
mini-GBIC connectivity; the 2510-48 switch has four Gigabit Ethernet ports, which can all be used concurrently
with two 10/100/1000 ports and two open mini-GBIC slots
HP Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 copper
ports
Resiliency and high availability


IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple
spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w
IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP trunking:
o 2510-24 switch supports up to two 10/100 trunks each with four links/ports plus one Gigabit Ethernet trunk
o 2510-48 switch supports up to 24 trunks with eight links/ports per trunk
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 1
QuickSpecs
HP 2510 Switch Series
Overview
Manageability









IEEE 802.1AB Link Layer Discovery Protocol (LLDP): provides automated device discovery protocol for easy mapping by
network management applications
RMON: provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Full-featured console: provides complete control of the switch with a familiar command-line interface (CLI)
Web interface: allows configuration of the switch from any Web browser on the network
Single IP Address Management: provides single IP address management for a virtual stack of up to 16 switches
Find-Fix-Inform: finds and fixes common network problems automatically, then informs administrator
Dual flash images: provides independent primary and secondary operating system files for backup while upgrading
Software updates: free downloads from the Web
Friendly port names: allow assignment of descriptive names to ports
Layer 2 switching



VLAN support and tagging: support up to 64 port-based VLANs and dynamic configuration of IEEE 802.1Q VLAN tagging,
providing security between workgroups
GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
Jumbo packet support: supports up to 9216-byte frame size to improve the performance of large data transfers (2510G
models only)
Security









Protected ports: provides increased security by allowing specified ports to be isolated from all other ports on the switch;
the protected port or ports can communicate only with the uplinks or shared resources
Multiple user authentication methods:
o IEEE 802.1X: is an industry-standard method of user authentication using an IEEE 802.1X supplicant on the client
in conjunction with a RADIUS server
o Web-based authentication: similar to IEEE 802.1X, it provides a browser-based environment to authenticate
clients that do not support the IEEE 802.1X supplicant
o MAC-based authentication: client is authenticated with the RADIUS server based on the client's MAC address
Guest VLAN: isolates guest and unauthorized user traffic to a separate VLAN
Port security: allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout: prevents particular configured MAC addresses from connecting to the network
Multiple IEEE 802.1X users per port: provides authentication of up to two IEEE 802.1X users per port; prevents user
"piggybacking" on another user's IEEE 802.1X authentication
STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing
forged BPDU attacks
Secure management access: securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL, and/or SNMPv3
TACACS+: eases switch management security administration by using a password authentication server
Convergence

IP multicast snooping: automatically prevents flooding of IP multicast traffic
Flexibility


Fanless design: reduces noise and distractions when deployed in open spaces (2510-24 switch only)
Multiple port density and connectivity speed options: provide choice and flexibility with a consistent user experience
Warranty and support
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 2
QuickSpecs
HP 2510 Switch Series
Overview



Lifetime warranty: for as long as you own the product with advance replacement and next-business-day delivery
(available in most countries)*
Electronic and telephone support: limited electronic and telephone support is available from HP; refer to:
http://www.hp.com/networking/warranty for details on the support provided and the period during which support is
available
Software releases: refer to: www.hp.com/networking/warranty for details on the software releases provided and the
period during which software releases are available for your product(s)
* Hardware warranty replacement for as long as you own the product, with next business day advance replacement (available in
most countries) with a five-year hardware warranty replacement for the disk drive included with HP AllianceONE Services zl
Module, HP Threat Management Services zl Module, HP PCM+ Agent with AllianceONE Services zl Module, and HP MSM765 zl
Mobility Controller. For details, refer to the HP Software License, Warranty, and Support booklet at:
http://www.hp.com/networking/warranty.
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 3
QuickSpecs
HP 2510 Switch Series
Configuration
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
HP 2510-24 Switch
 24 autosensing 10/100 ports
 2 RJ-45 10/100/1000 port or an open mini-GBIC slot
 min=0 \ max=2 SFP Transceivers
 1U - Height
J9019B
See Configuration
Note:1, 2
HP 2510-48 Switch
 48 autosensing 10/100 ports
 2 SFP 100/1000 Mbps ports
 min=0 \ max=2 SFP Transceivers
 1U - Height
J9020A
See Configuration
Note:1, 2
HP 2510-48G Switch
 44 autosensing 10/100 ports
 4 SFP 100/1000 Mbps ports
 min=0 \ max=4 SFP Transceivers
 1U - Height
J9280A
See Configuration
Note:1, 2
Configuration Rules:
Note 1
Note 2
The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X111 100M SFP LC FX Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
HP X121 1G SFP LC LH Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
J4858C
J4859C
J9054C
J8177C
J9099B
J9100B
J4860C
J9142B
J9143A
Localization required. (See Localization Menu for list.)
Factory Racked Models
HP 2510-24 Switch
 24 autosensing 10/100 ports
 2 RJ-45 10/100/1000 port or an open mini-GBIC slot
 min=0 \ max=2 SFP Transceivers
 1U - Height
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
J9019B
See Configuration
Note:1, 2
Page 4
QuickSpecs
HP 2510 Switch Series
Configuration
HP 2510-24 Factory Integrated Switch
J9019BZ
See Configuration
Note:1, 2
HP 2510-48 Switch
 48 autosensing 10/100 ports
 2 SFP 100/1000 Mbps ports
 min=0 \ max=2 SFP Transceivers
 1U - Height
J9020A
See Configuration
Note:1, 2
HP 2510-48 Factory Integrated Switch
J9020AZ
See Configuration
Note:1, 2
HP 2510-48G Switch
 44 autosensing 10/100 ports
 4 SFP 100/1000 Mbps ports
 min=0 \ max=4 SFP Transceivers
 1U - Height
J9280A
See Configuration
Note:1, 2
HP E2510-48G Rack Shippable Switch
J9280AZ
See Configuration
Note:1, 2
Configuration Rules:
Note 1
The following Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X111 100M SFP LC FX Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
HP X121 1G SFP LC LH Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
Note 3
J4858C
J4859C
J9054C
J8177C
J9099B
J9100B
J4860C
J9142B
J9143A
If this switch is factory installed in HP Universal Racks, Then the J9583A#0D1 or J9583AZ is required.
AMS then J9583AZ is required.
EMEA then J9583A#0D1 is required.
APD, Japan and China then J9583A#0D1 is required.
CLIC Only - Allow the J9583AZ in all regions.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 5
QuickSpecs
HP 2510 Switch Series
Configuration
SFP Transceivers
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X111 100M SFP LC FX Transceiver
HP X121 1G SFP LC LH Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
J4858C
J4859C
J9054C
J4860C
J8177C
J9142B
J9143B
J9099B
J9100B
Internal Power Supplies
No Power supplies
Cables
Multi-Mode Cables
HP .5m Multi-mode OM3 LC/LC FC Cable
HP 1m Multi-mode OM3 LC/LC FC Cable
HP 2 m Multimode OM3 LC/LC FC Cable
HP 5 m Multimode OM3 LC/LC FC Cable
HP 15 m Multimode OM3 LC/LC FC Cable
HP 30 m Multimode OM3 LC/LC FC Cable
HP 50 m Multimode OM3 LC/LC FC Cable
HP Premier Flex LC/LC OM4 2f 1m Cbl
HP Premier Flex LC/LC OM4 2f 2m Cbl
HP Premier Flex LC/LC OM4 2f 5m Cbl
HP Premier Flex LC/LC OM4 2f 15m Cbl
HP Premier Flex LC/LC OM4 2f 30m Cbl
HP Premier Flex LC/LC OM4 2f 50m Cbl
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Switch Enclosure Options
Rack Mount Kit
HP X410 1U Univ 4-post Rack Mnt Kit
J9583A
See Configuration
Note:1
HP X410 1U Integ Univ 4-post Rck Mnt Kit
J9583AZ
See Configuration
Note:1
Cofiguration Rules:
Note 1
If this Mounting Kit is order with #0D1 or Z then it integrates to the HP Universal Rack. (not the switch)
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 6
QuickSpecs
HP 2510 Switch Series
Configuration
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 7
QuickSpecs
HP 2510 Switch Series
Technical Specifications
HP 2510-48 Switch
(J9020A)
Ports
48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type:
Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full
only
2 open mini-GBIC (SFP) slots
1 RJ-45 serial console port
Physical characteristics Dimensions
9.3(d) x 17.42(w) x 1.73(h) in. (23.62 x 44.25 x
4.39 cm) (1U height)
Weight
6.05 lb. (2.74 kg), Fully loaded
Memory and processor
Processor
MIPS 32 @ 300 MHz, 16 MB flash, 128 MB
SDRAM; packet buffer size: 512 KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance
100 Mb Latency
< 4.9 µs (64-byte packets)
1000 MB latency
< 2.9 µs (64-byte packets)
Throughput
up to 13 million pps (64-byte packets)
Switching capacity
17.6 Gbps
MAC address table size
8000 entries
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/ Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/ Storage 15% to 90% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 15,000 ft. (4.6 km)
Acoustic
Power: 43.6 dB; DIN 45635T.19 per ISO 7779
Electrical characteristics Maximum heat
92 BTU/hr (97 kJ/hr)
dissipation
Voltage
100-127/200-240 VAC
Current
1.2/0.7 A
Maximum power rating 27 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
Safety
cUL (CSA 22.2 No. 60950); UL 60950-1; IEC 60950; EN 60950
Emissions
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A; IEC/EN 61000-3-2;
IEC/EN 61000-3-3
Immunity
Generic
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 8
QuickSpecs
HP 2510 Switch Series
Technical Specifications
Management
Notes
Services
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
HP PCM+; HP PCM; command-line interface; Web browser; out-of-band
management
When using mini-GBICs with this product, mini-GBICs with revision "B" or
later (product number ending with the letter "B" or later, e.g., J4858B,
J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone
support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware
(HR849E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware
(HR850E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7
software phone support (HR851E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing
(U4830E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 24x7 software phone support, software updates + Next Business
Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business
Day
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business
Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business
Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 9
QuickSpecs
HP 2510 Switch Series
Technical Specifications
Exchange (HS561E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP 2510-24 Switch
(J9019B)
Ports
24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
2 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port or an open mini-GBIC slot (for use with mini-GBIC
transceivers)
Physical characteristics Dimensions
9.3(d) x 17.42(w) x 1.73(h) in. (23.62 x 44.25 x
4.39 cm) (1U height)
Weight
4.89 lb. (2.22 kg), Fully loaded
Memory and processor
Processor
MIPS 32 @ 264 MHz, 8 MB flash, 64 MB SDRAM;
packet buffer size: 384 KB
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance
100 Mb Latency
< 4.9 µs (64-byte packets)
1000 MB latency
< 2.6 µs (64-byte packets)
Throughput
up to 6.5 million pps (64-byte packets)
Switching capcity
8.8 Gbps
MAC address table size
8000 entries
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
15% to 95% @ 104°F (40°C), noncondensing
humidity
Nonoperating/ Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage
15% to 95% @ 149°F (65°C), noncondensing
relative humidity
Altitude
up to 10,000 ft. (3 km)
Acoustic
Power: 0 dB no fan
Electrical characteristics Maximum heat
68 BTU/hr (71.74 kJ/hr)
dissipation
Voltage
100-127/200-240 VAC
Current
0.7/0.4 A
Maximum power rating 20 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.
Safety
cUL (CSA 22.2 No. 60950); UL 60950-1; IEC 60950; EN 60950
Emissions
FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A; IEC/EN 61000-3-2;
IEC/EN 61000-3-3
Immunity
Generic
EN 55024, CISPR 24
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 10
QuickSpecs
HP 2510 Switch Series
Technical Specifications
Management
Notes
Services
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
magnetic field
Voltage dips and
IEC 61000-4-11
interruptions
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
HP PCM+; HP PCM; command-line interface; Web browser; out-of-band
management
When using mini-GBICs with this product, mini-GBICs with revision "B" or
later (product number ending with the letter "B" or later, e.g., J4858B,
J4859C) are required.
3-year, 4-hour onsite, 13x5 coverage for hardware (U4683E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U4835E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone
support
and SW updates (U6321E)
3-year, 24x7 SW phone support, software updates (UF792E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware
(HR849E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware
(HR850E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7
software phone support (HR851E)
Installation with minimum configuration, system-based pricing (U4826E)
Installation with HP-provided configuration, system-based pricing
(U4830E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR948E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR949E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR950E)
4-year, 24x7 SW phone support, software updates (UR951E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR952E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR953E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone
(UR954E)
5-year, 24x7 SW phone support, software updates (UR955E)
3 Yr 6 hr Call-to-Repair Onsite (UW368E)
4 Yr 6 hr Call-to-Repair Onsite (UW369E)
5 Yr 6 hr Call-to-Repair Onsite (UW370E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR853E)
1-year, 24x7 software phone support, software updates (HR852E)
1-year, 24x7 software phone support, software updates + Next Business
Day
Hardware Exchange (HS554E)
1-year, 24x7 software phone support, software updates + 4 hour hardware
exchange (HS555E)
3-year, 24x7 software phone support, software updates + Next Business
Day
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 11
QuickSpecs
HP 2510 Switch Series
Technical Specifications
Hardware Exchange (HS556E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS557E)
4-year, 24x7 software phone support, software updates + Next Business
Day
Hardware Exchange (HS558E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS559E)
5-year, 24x7 software phone support, software updates + Next Business
Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
Refer to the HP website at: http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
Standards and protocols Device management
(applies to all products in HTML and telnet management
series)
General protocols
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 951 BOOTP
RFC 1542 BOOTP Extensions
RFC 2030 Simple Network Time Protocol (SNTP) v4
IP multicast
RFC 3376 IGMPv3
MIBs
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1573 SNMP MIB II
RFC 2021 RMONv2 MIB
RFC 2096 IP Forwarding Table MIB
RFC 2613 SMON MIB
RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 2863 The Interfaces Group MIB
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 12
QuickSpecs
HP 2510 Switch Series
Technical Specifications
RFC 3418 MIB for SNMPv3
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
RFC 2819 Four groups of RMON: 1 (statistics), 2
(history), 3 (alarm) and 9 (events)
SNMPv1/v2c/v3
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 2138 RADIUS Authentication
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv1/SSHv2 Secure Shell
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 13
QuickSpecs
HP 2510 Switch Series
Accessories
HP 2510 Switch Series accessories
Transceivers
HP X111 100M SFP LC FX Transceiver
HP X112 100M SFP LC BX-D Transceiver
HP X112 100M SFP LC BX-U Transceiver
HP X121 1G SFP LC LH Transceiver
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X122 1G SFP LC BX-D Transceiver
HP X122 1G SFP LC BX-U Transceiver
J9054C
J9099B
J9100B
J4860C
J4858C
J4859C
J8177C
J9142B
J9143B
Cables
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
QK732A
QK733A
QK734A
QK735A
QK736A
QK737A
Mounting Kit
HP X410 1U Universal 4-post Rack Mounting Kit
J9583A
HP 2510-48 Switch
(J9020A)
HP X121 1G SFP RJ45 T Transceiver
J8177C
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 14
QuickSpecs
HP 2510 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP X111 100M SFP LC FX Ports
Transceiver (J9054C)
Physical characteristics
HP X111 100M SFP LC FX
Transceiver: An SFP
format 100-megabit
transceiver with LC
connectors using FX
technology.
Environment
Cabling
Notes
Services
HP X112 100M SFP LC BX- Ports
D Transceiver (J9099B)
Physical characteristics
A small form-factor
pluggable (SFP) 100Megabit BX (biEnvironment
directional) "downstream"
transceiver that provides
100 Mbps full-duplex
connectivity up to 10 km
on one strand of
singlemode fiber. The
Cabling
J9099B connects to the
J9100B "upstream"
transceiver, or to any
IEEE-standard 100BASEBX10-U ("upstream")
device.
1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full
Dimensions: 2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 95%
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 5% to 85%
Altitude: up to 10,000 ft. (3 km)
Cable type:
62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively; Maximum distance:
• 2 km (full duplex) or 412 m (half duplex)
Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J9054C 100-FX SFPLC Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.
Refer to the HP website at http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D); Duplex:
full only
Dimensions
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22
cm)
Weight
0.04 lb. (0.03 kg)
Operating temperature 32ºF to 158ºF (0ºC to 70ºC)
Operating relative
0% to 95%, noncondensing
humidity
Nonoperating/Storage
-40ºF to 185ºF (-40ºC to 85ºC)
temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:

Notes
0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX Transceivers"
on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9099B connects to the J9100B "upstream" transceiver, or to any IEEEc04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 15
QuickSpecs
HP 2510 Switch Series
Accessory Product Details
Services
HP X112 100M SFP LC BX- Ports
U Transceiver (J9100B)
Physical characteristics
A small form-factor
pluggable (SFP) 100Megabit BX (biEnvironment
directional) "upstream"
transceiver that provides
100 Mbps full-duplex
connectivity up to 10 km
on one strand of
singlemode fiber. The
Cabling
J9100B connects to the
J9099B "downstream"
transceiver, or to any
IEEE-standard 100BASEBX10-D ("downstream")
device.
Notes
Services
HP X121 1G SFP LC LH
Transceiver (J4860C)
Ports
Physical characteristics
A small form-factor
pluggable (SFP) Gigabit LH Environment
transceiver that provides a
full-duplex Gigabit
solution up to 70 km on
single-mode fiber.
Cabling
standard 100BASE-BX10-U ("upstream") device. (A 100-BX-D transceiver
can only connect to a 100-BX-U product. You cannot connect two 100-BX-D
transceivers together.)
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U); Duplex:
full only
Dimensions
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22
cm)
Weight
0.07 lb. (.03 kg)
Operating temperature 32ºF to 158ºF (0ºC to 70ºC)
Operating relative
0% to 95%, noncondensing
humidity
Nonoperating/Storage
-40ºF to 185ºF (-40ºC to 85ºC)
temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:

0.5-10,000 m (single-mode fiber)
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX Transceivers"
on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9100B connects to the J9099B "downstream" transceiver, or to any
IEEE-standard 100BASE-BX10- D ("downstream") device. (A 100-BX-U
transceiver can only connect to a 100-BX-D product. You cannot connect
two 100-BX-U transceivers together.)
Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.
Power consumption is 1.1 watts maximum.
Refer to the HP website at http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics);
Duplex: full only
Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)
Operating temperature: -40°F to 185°F (-40°C to 85°C)
Operating relative humidity: 0% to 95% @ 77°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Cable type:

Low metal content, single-mode fiber-optic, complying with ITU-T
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 16
QuickSpecs
HP 2510 Switch Series
Accessory Product Details
G.652 and ISO/IEC 793-2 Type B1;
Maximum distance:

Notes
Services
HP X121 1G SFP LC SX
Transceiver (J4858C)
10-70,000 m (single-mode fiber)
Power consumption is 0.8 watts typical with 1 watt maximum at 100%
utilization.
For distances less than 20 km, a 10 dB attenuator must be used.
For distances between 20 km and 40 km, a 5 dB attenuator must be used.
Attenuators can be purchased from most cable vendors.
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Ports
Physical characteristics
1 LC 1000BASE-SX port; Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP
A small form-factor
pluggable (SFP) Gigabit SX Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
transceiver that provides a
Operating relative humidity: 5% to 85%, noncondensing
full-duplex Gigabit
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
solution
Altitude: up to 10,000 ft. (3 km)
up to 550 m on multimode
Electrical characteristics Power consumption typical: 0.4 W
fiber.
Power consumption maximum: 0.7 W
Cabling
Type:

62.5/125 µm or 50/125 µm (core/cladding) diameter, gradedindex, low metal content, multimode fiber optic, complying with
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;
Maximum distance:




Services
HP X121 1G SFP LC LX
Transceiver (J4859C)
Ports
Physical characteristics
HP X121 1G SFP LC LX
Transceiver: An SFP
format
Environment
2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode
Refer to the HP website at http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only
Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 17
QuickSpecs
HP 2510 Switch Series
Accessory Product Details
gigabit transceiver with LC
connectors using LX
Cabling
technology.
Altitude: up to 10,000 ft. (3 km)
Type:

Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, singlemode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2
Type B1;
Maximum distance:




Notes
Services
HP X121 1G SFP RJ45 T
Transceiver (J8177C)
Ports
Physical characteristics
HP X121 1G SFP RJ45 T
Transceiver: An SFP
Environment
format gigabit transceiver
with RJ45 connectors
using 1000BaseT
technology.
Cabling
Notes
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km
bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km
bandwidth)
2-10,000 m (single-mode fiber)
A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full
only
Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)
Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM airflow
over the SFP module)
Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),
noncondensing
Altitude: up to 10,000 ft. (3000 km)
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
• 100 m
Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J8177C 1000Base-T
Mini-GBIC" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.
The J8177C Gigabit copper mini-GBIC is not supported on dual-personality
ports.
The J8177C is capable of 100 Mb operation. This is supported on only the
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 18
QuickSpecs
HP 2510 Switch Series
Accessory Product Details
Services
HP X122 1G SFP LC BX-D
Transceiver (J9142B)
Ports
Physical characteristics
A small form-factor
pluggable (SFP) GigabitBX (bi-directional)
Environment
"downstream" transceiver
that provides a fullduplex Gigabit solution up
to 10 km on one strand of
single-mode fiber. The
J9142B connects to the
Cabling
J9143B "upstream"
transceiver, or to any
IEEE-standard 1000BASEBX10-U ("upstream")
device.
Notes
Services
HP X122 1G SFP LC BX-U
Transceiver (J9143B)
Ports
Physical characteristics
A small form-factor
pluggable (SFP) GigabitBX (bi-directional)
"upstream" transceiver
that provides a full-
Environment
HP ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software
version K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb
operation.
Important: The earlier J8177B does not support 100 Mb operation.
When used in the ProCurve Switch gl 20-Port 10/100/1000 Module
(J4908A), the J8177C mini-GBIC can be installed in either the upper or lower
mini-GBIC port, but will block access to the other port.
Refer to the HP website at http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D);
Duplex: full only
Dimensions
2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x
1.18 cm)
Weight
0.04 lb. (0.02 kg)
Operating temperature 32ºF to 158ºF (0ºC to 70ºC)
Operating relative
0% to 95%, non-condensing
humidity
Non-operating/
–40ºF to 185ºF –40ºC to 85ºC)
Storage temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:

0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1490 nm. Receive wavelength: 1310 nm.
Power consumption is 1 watt maximum.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX Transceivers"
on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9142B connects to the J9143B "upstream" transceiver, or to any
IEEE-standard 1000BASE-BX10-U ("upstream") device. (A 1000-BX-D
transceiver can only connect to a 1000-BX-U product. You cannot connect
two 1000-BX-D transceivers together.)
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U); Duplex:
full only
Dimensions
2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x
1.18 cm)
Weight
0.04 lb. (0.02 kg)
Operating temperature 32ºF to 158ºF (0ºC to 70ºC)
Operating relative
0% to 95%, non-condensing
humidity
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 19
QuickSpecs
HP 2510 Switch Series
Accessory Product Details
duplex Gigabit solution up
to 10 km on one strand of
single-mode fiber. The
Cabling
J9143B connects to the
J9142B "downstream"
transceiver, or to any
IEEE-standard 1000BASEBX10-D ("downstream")
device.
Notes
Services
HP 0.5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ833A)
Notes
Non-operating/
–40ºF to 185ºF –40ºC to 85ºC)
Storage temperature
Type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:

0.5-10,000 m (single-mode fiber)
Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the HP BX Transceivers"
on the "HP Mini-GBICs and SFPs" Manuals Web page.
The J9143B connects to the J9142B "downstream" transceiver, or to any
IEEE-standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U
transceiver can only connect to a 1000-BX-D product. You cannot connect
two 1000-BX-U transceivers together.)
Power consumption is 1 watt maximum.
Refer to the HP website at http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.










Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 20
QuickSpecs
HP 2510 Switch Series
Accessory Product Details

HP 1 m Multimode OM3
LC/LC Optical Cable
(AJ834A)
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes











HP 2 m Multimode OM3
LC/LC Optical Cable
(AJ835A)
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
Cabling
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Notes
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 21
QuickSpecs
HP 2510 Switch Series
Accessory Product Details
end and LC duplex connectors on other end.











HP 5 m Multimode OM3
LC/LC Optical Cable
(AJ836A)
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cabling
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Notes
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable
and Ethernet assembly with LC duplex connectors on one end and LC
duplex connectors on other end.






Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 22
QuickSpecs
HP 2510 Switch Series
Accessory Product Details





Services
HP 15 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ837A)
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes











Services
HP 30 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ838A)
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 23
QuickSpecs
HP 2510 Switch Series
Accessory Product Details
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.
Notes











Services
HP 50 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ839A)
Notes
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.




Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 24
QuickSpecs
HP 2510 Switch Series
Accessory Product Details







HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
1m Cable (QK732A)
Services
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
2m Cable (QK733A)
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Notes
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 25
QuickSpecs
HP 2510 Switch Series
Accessory Product Details
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
5m Cable (QK734A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
15m Cable (QK735A)
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Notes
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 26
QuickSpecs
HP 2510 Switch Series
Accessory Product Details
sales office.
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
30m Cable (QK736A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
50m Cable (QK737A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.
Services
HP X410 1U Universal 4post Rack Mounting Kit
(J9583A)
Notes
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um,
Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m
added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
The rack mounting kit supports the 1U, full width switches in the following
switch series and the power supply: V1810 Series, E2510 Series, E2520
Series, E2610 Series, E2810 Series, E2910 Series, E3500 Series, and the
E620 Power Supply
This universal rack mounting kit is design to fit the following racks: HP 10K
10642, HP 10K 10842, Panduit CN, Panduit CS, Wrightline Vantage S2, APC
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 27
QuickSpecs
HP 2510 Switch Series
Accessory Product Details
Services
Netshelter 600mm, and APC Netshelter 800mm. It may well fit many other
brands and models too.
Refer to the HP website at: http://www.hp.com/networking/services for
details on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your local
HP sales office.
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 28
QuickSpecs
HP 2510 Switch Series
Summary of Changes
Date
24-Jul-2015
02-Dec-2014
17-Jan-2014
05-Nov-2013
06-Sep-2013
10-Jun-2013
25-Oct-2011
27-Sep-2011
11-Aug-2011
10-Sep-2010
02-Jun-2010
Version History
From Version 20 to
21
From Version 19 to
20
From Version 18 to
19
From Version 17 to
18
From Version 16 to
17
From Version 15 to
16
From Version 14 to
15
From Version 12 to
14
From Version 11 to
12
From Version 10 to
11
From Version 9 to 10
Action
Changed
Changed
Changed
Description of Change:
This QuickSpecs was retired; no further updates will be
made.
SKU J9054B changes to J9054C
Added
Factory Racked Models and Switch Enclosure Options
were revised.
Configuration was added.
Changed
Removed two EOL models from the document,
Added
OM4 cables were added.
Changed
The QuickSpec was completely revised, including
changing the title.
Accessory Product Details was added.
Added
Changed
Changed
Changed
Minor edits were made in Key Features, Features and
Benefits, Accessories, and in each model's specifications.
The QuickSpec was completely revised, including
changing the title.
Updated the Notes section of Technical Specifications.
Updated Standards and Protocols
06-Nov-2009
From Version 8 to 9
Changed
23-Sep-2009
From Version 7 to 8
Changed
17-Mar-2009
From Version 6 to 7
Changed
17-Mar-2009
From Version 6 to 7
Changed
26-Jun-2008
From Version 4 to 5
Added
13-May-2008
21-Apr-2008
31-Oct-2007
From Version 3 to 4
From Version 2 to 3
From Version 1 to 2
Changed
Changed
Changed
Added new cables to the Accessories section.
Revised the Accessories section, revised the Key features
section, and revised the Introduction.
Revised the Accessories section, added a Key features
section, and removed a bullet point underneath
"Convergence" in Features and Benefits.
Completely revised the Warranty and Support section in
the Features and Benefits, added "HP" throughout the
document, Guest VLAN to the Security section and RADIUS
VLAN voice to the Convergence section. Note the title has
changed.
Completely revised the Warranty and Support section in
the Features and Benefits, added "HP" throughout the
document, Guest VLAN to the Security section and RADIUS
VLAN voice to the Convergence section. Note the title has
changed.
Models 2510G-24 and 2510G-48, 10/100/1000
Connectivity and Multiple port density and connectivity
speed were added within the QuickSpec.
Changes were made throughout the QuickSpec.
Changes were made throughout the QuickSpec.
The Features and Benefits and Accessory part numbers
were revised.
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 29
QuickSpecs
HP 2510 Switch Series
Summary of Changes
To learn more, visit: www.hp.com/networking
© Copyright 2015 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
c04111642 — DA – 12599 Worldwide — Version 21 — July 24, 2015
Page 30
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement