HBM-240 유럽향(16).qxd
Description of parts
(Multi-Funtion Button)
LED indicator
Charging Port
Volume UP /
Down Button
LG Electronics
BLUETOOTH ® Mono Headset
HBM-240 User manual
Included in package
Ear bud
All rights reserved.
LG Electronics Inc., 2010
User Manual
Note : For the best performance and
to prevent any damage to, or misuse of the
HBM-240, please read all of the information
carefully prior to using the HBM-240.
Any modifications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
Charging Your Headset
How to use
Easy Pairing (First Time Pairing)
1. Press and hold the MFB Button for 3 seconds, to turn on the HBM-240. When the
headset enters Pairing Mode, the LED indicator will show a solid blue light.
2. Using your handset, find the Bluetooth Menu and “search for” or “add” new devices.
•Select “LG HBM-240” from the list of devices and pair it with your handset.
3. If asked for the Pass/PIN code please enter “0000” (4 Zeros).*
* Note : If your handset supports Secure Simple Pairing (SSP), you will not need to
enter Pass/PIN code.
•Once pairing has completed successfully, you will hear a beep.
4. Some handsets might ask for permission to access the phone’s contact list. If you
receive a message from your handset, please select “OK” or “Allow access”
•The HBM-240 will automatically turn off if not paired within 3 minutes.
Manual Pairing (Pairing with another phone or re-pairing)
Bluetooth® specification
Standby time / Talk time
Charging time
Operation temperature
Dimension / Weight
V2.1 (Headset / HFP)
Battery 3.7V / 125mAh Li-Polymer
Up to 450Hrs / Up to 11Hrs
< 2Hrs
-10°C ~ 60°C
20.8mm(W) X 45.1mm(L) X 9.8mm, with Clip
21.0mm(H) / 14.2g
•With the Power off, press and hold the MFB button for 6 seconds.
•When the headset enters Pairing Mode, the LED indicator will show a solid blue light.
After the procedure repeat Easy Pairing steps 2 through 4.
Sounds Settings
LG HBM-240
LG HBM-240
Display Settings
Phone Settings
LG HBM-240
The handsfree is
now ready for use
Call Setting
- Before using the headset for the first time, you must pair it with a Bluetooth-enabled
- To pair your headset with an additional handset, the headset must be placed in Pairing
- There are 2 Pairing Mode Methods with the HBM-240.
Transferring a call*
- While on a call on your handset, briefly press the MFB button on the headset to transfer
the audio to the headset. And to transfer a call from the headset to handset, press and hold
VOLUME UP button for 3 seconds.
Power on / Power off
- Press the MFB button for 3 seconds.
Volume Control
- Briefly press the VOLUME button.
- When the charger is connected, with the power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid blue light.
- When charging is complete, the LED indicator will turn off.
Call Reject*
- Press the MFB button for 1 second when the handset rings.
Battery status check
- Press and hold the VOLUME DOWN button for 3 seconds.
- There are 3 levels of battery status
Battery status
Number of blue LED flashes
10 flashes
5 flashes
Call waiting*
- Answer a second call without hanging up the first call by pressing the MFB button for 1
second (you will hear a beep). Press the MFB button for 1 second to turn to the original
- Briefly press the MFB button to terminate the active call or both calls at once.
(subject to handset's support)
1 flash
Low battery
- An announcement will be made once every 30 seconds.
- If the battery is not charged, the headset will turn off.
Out of range
- Operating range up to 10 meters (approximately 33 ft)
- If the headset and handset do not automatically reconnect when they are back within
the required range, briefly press the MFB button on the HBM-240 to reconnect
* It is possible to use these functions only when your handset supports them. For further
information about using these features, please consult your handset’s user manual.
Answering a call / Ending a call
- Briefly press the MFB button.
Last number redial*
- Press and hold the MFB button for 1 second to activate “Last Number Redial”.
The headset will beep, and call the last number dialed.
Making a call
- If you make a call from the handset, the call will (subject to phone settings) automatically
transfer to the headset. If the call is not automatically transferred, you can manually
transfer the call by briefly pressing the MFB button.
Voice dialing*
- Briefly press the MFB button to activate “Voice Command”.
NOTE: If the handset does not support Voice Dialing, it is possible that performing this action
will activate Last Number Redial.
How to use
How to use
HBM-240 Status
Power on
Power off
Pairing mode
Headset / hands-free
profile connected
Call connected
Charging complete
The blue LED light flickers 4 times.
The blue LED light flickers 4 times
and then turns off.
The blue LED light stays on.
The blue LED light flickers
2 times every 5 seconds.
The blue LED light flickers
2 times every 5 seconds.
The blue LED stays on.
LED turns off.
Do not drop the unit from high places.
Do not modify, repair, or take apart.
LED indication
Do not expose directly to water, alcohol, benzene, etc. for cleaning.
Do not expose directly to flammables.
Do not place or keep the unit near flammables.
Keep unit away from humidity & dust.
Do not place heavy objects on the unit.
Only use the headset with an original LG charger, otherwise it may be damaged.
•Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
•There is a risk of explosion if the battery is replaced by an incorrect type.
•Dispose of used batteries according to the instructions.
Does not turn on
Unable to
communicate with
the LG Bluetooth®
Headset HBM-240
Unable to pair the
HBM-240 with the
Bluetooth® device
Check whether the battery
of the HBM-240 is fully
Check whether
the handset supports
the headset or hands-free
Bluetooth profiles.
Check whether the battery
of the HBM-240 is low.
Check and make sure the
headset is on.
Check and make sure
the headset is placed
in pairing mode.
Low sound (speaker)
Check the speaker volume.
Charge the battery.
Determine whether your
handset supports
the headset or hands-free
Bluetooth profiles.
Charge the battery.
Press and hold the MFB
button for 3 seconds to turn
on the headset.
With the power off, press and
hold the MFB button for
6 seconds to manually place the
headset in pairing mode.
lncrease the volume level.
Declaration of Confirmation
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
To comply with the FCC RF exposure compliance requirements, no change to the
antenna or the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user's authority to
operate the device.
Hereby, LG Electronics Inc. declares that this HBM-240 is in compliance with the essential
requirements and other relevant provisions of Directive
1. Radio frequency exposure
This Bluetooth® Headset, HBM-240, is a radio transmitter and receiver. When in
operation, it communicates with a Bluetooth® equipped mobile device by receiving and
transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency
range 2.4 to 2.4835 GHz. The output power of the radio transmitter is low, 0.001 watt.
Your Bluetooth® Headset is designed to operate in compliance with the RF exposure
guidelines and limits set by national authorities and international health agencies when
used any compatible LG Electronics mobile phone.
2. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially explosive atmosphere.
It is rare, but your electronic device could generate sparks. Sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially
explosive atmosphere are often, but not always, clearly marked.
3. Battery information
A rechargeable battery has a long service life if treated properly. A new battery or one
that has not been used for a long period of time could have reduced capacity the first few
times it is used. Do not expose the battery to extreme temperatures, never above
+60°(+140°F) or under -20°(-4°F). For maximum battery capacity, use the battery in room
temperature. If the battery is used in low temperatures, the battery capacity will be
reduced. The battery can only be charged in temperatures between +10°(+50°F) and
+45°(+113°F). For your safety, do not remove the battery incorperated in the product. If
you need to replace the battery, take it to the nearest authorised LG Electronics service
point or dealer for assistance.
- This warranty does not cover product failures due to improper repair installations,
modifications or service performed by a non-LG Electronics authorized person.
Tampering with any of the seals on the product will void the warranty.
6.Do no use for emergency calls.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics warrants this product
to be free from defects in design, material and workmanship at the time of its original
purchase by a consumer, and for a subsequent period of one (1) year. Should your
product need warranty service, please return it to the dealer from whom it was
purchased or contact your local LG Electronics contact center to get further information.
Important safety information
4. Recycling the battery in your Bluetooth® Headset
Avoiding hearing damage Permanent hearing loss may occur if you use your Headset
at a high volume. Set the volume to a safe level. You can adapt over time to a higher
volume of sound that may sound normal but can be damaging to your hearing. If you
experience ringing in your ears or muffled speech, stop listening and have your hearing
checked. The louder the volume, the less time is required before your hearing could be
affected. Hearing experts suggest that to protect your hearing:
The battery in your Bluetooth® Headset must be disposed of properly and should never
be placed in municipal waste. The LG Electronics service partner removing battery will
dispose of it according to local regulations.
•Limit the amount of time you use Headset at high volume.
•Avoid turning up the volume to block out noisy surroundings.
•Turn the volume down if you can't hear people speaking near you.
5. Conditions
Please refer to your handset user guide for more information on how to adjust listening
levels on your handset.
- The warranty is valid only if the original receipt issued to the original purchaser by the
dealer, specifying the date of purchase and serial number, is presented with the product
to be repaired or replaced. LG Electronics reserves the right to refuse warranty service
if this information has been removed or changed after the original purchase of the
product from the dealer.
- This Warranty does not cover any failure of the product due to normal wear and tear,
or due to misuse, including but not limited to use in other than the normal and customary
manner, in accordance with instructions for use and maintenance of the product. Nor
does this warranty cover any failure of the product due to accident, modification or
adjustment, acts of God or damage resulting from liquid.
Additional Information
Using Headsets safely Use of Headsets to listen to music while operating a vehicle is
not recommended and is illegal in some areas. Be careful and attentive while driving.
Stop using this device if you find it disruptive or distracting while operating any type of
vehicle or performing any other activity that requires your full attention.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF