P1 SUBS - Rockford Fosgate
THE
NEW LINE-UP
OF PUNCH AMPLIFIERS
QUICK, EASY, C.L.E.A.N. LEVEL SETUP
P1 SUBS
NOW AVAILABLE IN 2OHM
$5.99 US
$6.99 CAN
6 PRIME
AMPLIFIER ADDITIONS
PRIME COAXIALS WITH
NEW MIX NEW LOOK
MOTORSPORTS
MARINE
MOBILE
TABLE OF
CONTENTS
5
13
PUNCH AMPS
15
17
C.L.E.A.N.
25
33
PRIME COAX
35
37
P1 SUBS
AMPLIFIER
45
TECHNOLOGIES
53
LINE UP
55
GUTS
57
SUBWOOFER
67
TECHNOLOGIES
73
LINE UP
77
FAMILIES
AMPLIFIER
AMPS COMPARED
OF AN AMPLIFIER
FAMILIES
SUBWOOFER
SUBS COMPARED
SPEAKER
FAMILIES
TECHNOLOGIES
SPEAKER
LINE UP
SPEAKERS COMPARED
FRAMEWORK
OF A SPEAKER
MARINE
PRODUCTS
TECHNOLOGIES
MARINE
VEHICLE
INTERGRATION
ANATOMY
OF A SUBWOOFER
©2013 Rockford Corporation. All Rights Reserved. ROCKFORD FOSGATE®, PUNCH®, 3SIXTY® and associated logos where applicable, are registered trademarks of Rockford Corporation in the United States and/or other countries. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rockford
Corporation is under license. All other trademarks are the property of their respective owners. Specifications subject to change without notice.
“Made for iPod” and “Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
3
2013 BUYERS GUIDE
CLEAN AD
CLEAN.
The NEW lineup of Punch amplifiers is now available.
Visit your local authorized Rockford Fosgate retailer
to discover our secret behind a clean sound.
rockfordfosgate.com • 800.366.2349
AMPLIFIERS
30 YEARS OF PUSHING THE ENVELOPE
dB/OCT
24
CROSSOVER
SLOPE
YEAR
OHMS
YEAR
2 1
2/1
LIMITED
WARRANTY
FREE*
EXTENDED
WARRANTY
IMPEDANCE
STABILITY
PUNCH HAS REVOLTIONIZED THE INDUSTRY
dB/OCT
12
CROSSOVER
SLOPE
YEAR
OHMS
YEAR
1 1
4/2
LIMITED
WARRANTY
FREE*
EXTENDED
WARRANTY
IMPEDANCE
STABILITY
BREAKING NEW GROUND IN PERFORMANCE & VALUE
LIMITED
WARRANTY
OHMS
YEAR
dB/OCT
12
1
4/2
CROSSOVER
SLOPE
IMPEDANCE
STABILITY
*WITH QUALIFYING ROCKFORD FOSGATE INSTALLATION KIT PURCHASE
500WATTS
1000WATTS
1500WATTS
2500WATTS
400WATTS
600WATTS
400WATTS
600WATTS
800WATTS
1000WATTS
300WATTS
400WATTS
500WATTS
1000WATTS
9
2013 BUYERS GUIDE
300WATTS
400WATTS
500WATTS
1000WATTS
400WATTS
600WATTS
1000WATTS
300WATTS
500WATTS
300WATTS
300WATTS
BOOSTED RAIL
11 2013 BUYERS GUIDE
250WATTS
500WATTS
750WATTS
1200WATTS
150WATTS
250WATTS
300WATTS
400WATTS
600WATTS
600WATTS
PROPRIETARY
ROCKFORD TECHNOLOGY
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has
lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and
make it Rockford.
+20
+18
+16
+14
+12
PUNCH EQUALIZATION
+10
U.S. Patent (21,323)
+8
+6
+4
+2
-0
-2
20
50
100
200
500
BASS
Hz
1k
2k
5k
10k 20k
TREBLE
In the early 70’s, Jim Fosgate studied the acoustical properties of automobiles by using a
real time analyzer. Jim discovered multiple problems common in all vehicles; a midbass
hump, a steep high frequency roll off and reduced bass response. This research lead to
adding Punch EQ to Rockford Fosgate amps to help correct the acoustical deficiencies
found in the automotive listening environment. The new Punch EQ2 is an on-board
equalization circuit that when set to Low-Pass (LP) operation, becomes a variable
Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and
Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are
boosted.
Products Featuring on-board PUNCH EQ
HEATSINK
ALUMINIUM
MOSFET
THERMAL
GREASE
CERAMIC
MAXIMUM EFFICIENCY HEAT
SINK APPLICATION
MEHSA3 heat management technology takes heat sink efficiency to a new level. The key was to
create a dielectric layer between the ceramic topside and the aluminum base that retains all of the
electrical isolation and capacitive coupling of the early material increasing its thermal conductivity.
The higher power handling results in a 20% reduction in thermal impedance.
Products Featuring MEHSA
4/2/1
The ability to deliver continuous total RMS rated power to the speaker(s) in any impedance ranging
between 4 ohm through 1 ohm.
Products Featuring 4/2/1
YOUTUBE.COM/ROCKFORDFOSGATE
WATCH DETAILED VIDEOS ON OUR AMPLIFIER TECHNOLOGIES.
13 2013 BUYERS GUIDE
T2500-1bdCP
WITH
WITHOUT
Output Power
4000
CONSTANT POWER
3500
U.S. Patent (7,994,857)
3000
2500
Frequency
240
220
200
180
160
140
120
80
100
60
40
20
2000
Music and speakers have a dynamic relationship. As the frequency of music varies, so does the
impedance of the speaker. Rockford Fosgate’s Constant Power circuit design actively monitors
and increases voltage and current as the speaker’s impedance rises with music. Resulting in up
to a 25% increase in total amplifier power.
Products Featuring CONSTANT POWER
DYNAMIC THERMAL MANAGEMENT
THERMAL IMAGE WITHOUT
Our engineers at Rockford Fosgate have developed an award winning cooling design called
Thermal Management). This patent pending design seamlessly manages the
output and power supply temperatures, while evenly distributing the excess heat across the
entire amplifier.
T H E R M A DTM
L I M A G(Dynamic
E WITH
Products Featuring DTM
HERMAL IMAGE WITHOUT
THERMAL IMAGE WITH
NON MULTIPLYING ADVANCED DECISION
Safe output protection is handled by our proprietary NOMAD circuit. NOMAD is an analog
computer designed to calculate the maximum level of safe current allowable for each output
device (based on their instantaneous voltage drop). This allows the protection to be much more
precise than ever before; offering protection against:
• Reverse Polarity
• Short Circuit
• Thermal
• Low Impedance
• Under/Over Voltage
Products Featuring NOMAD
CEA-2006
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These
guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated
marketing ratings.
Products Compliant with CEA-2006
C.L.E.A.N.
Time and sophisticated test equipment have been replaced, with Rockford’s integrated level setting
technology called CLEAN (Calibrated Level Eliminates Audible Noise). Using simple LED indicators
to identify both signal clipping from the audio source and the output level clipping to the speakers.
This precise level set-up eliminates speaker damaging distortion.
Products Featuring CLEAN
AMPLIFIER PERFORMANCELINEUP
TOPOLOGIESEXPLAINED -
Amplifier topology is the arrangement of parts in an amplifier design. These designs are
broken out into ‘classes’. Each class has tradeoffs, making the various classes suited for
various applications…like Class D or BD with higher RMS power, but undesirable noise
in the higher frequencies making it better suited to power subwoofers.
CLASS BD (Patent RE40550) -The Rockford Fosgate
bd topology is more efficient than typical class AB and has
lower distortion than class D designs. Rockford bd amplifiers
are 75-80% efficient vs. 20-60% efficient class ab amplifiers.
Delivering more power from your amplifier with less drain on
your vehicles electrical and charging system.
CLASS AD -The Rockford Fosgate ad topology brings
our high efficiency bd amplifier design to a full range application. Using our Dynamic Frequency Switching to increase
the switching frequency during lower output levels for better
signal resolution. Coupled with Post Choke Feedback Filtering to compare the input signal to the output signal at the
speaker connector removing any unwanted distortion. These
technologies eliminate the inherent switching noise associated with typical class D designs.
CLASS D -High efficiency amplifier design that reduces
current consumption from the charging system
CLASS TA -The trans•ana topology operates the
output stage with its full voltage gain, which allows the
input stage to operate from a low voltage regulated
supply. The signal is then shifted up in level to the high
voltage section by the driver stage which forms an active
node at ultrasonic frequencies. This results in a very
stable, highly linear operation.
CLASS BR (Patent 8,212,620) -To achieve higher
efficiency with lower distortion, Rockford’s br topology
combines, Cycle-by-Cycle, an indirectly coupled high/
low voltage rail linear topology with a switched high/low
voltage linear rail topology. This combination yields an
unsurpassed power density (watts per cubic inch).
CLASS AB -The combination of a class B power
output with the class A low distortion attributes make
class AB the most common amplifier topology in the
electronics industry.
FULL RANGE CLASS D -High efficiency
amplifier design that reduces current consumption from
the charging system
EFFICIENCY
RMS
CLASS
1 CHANNEL
500-2500watts
500-1000watts
500-1200watts
85%
85%
90%
amplifier cross sections show the amount of heatsink material (Thermal Mass). A greater thermal mass means increased play
THERMAL MASS PER INCH - These
time and lower device distortion.
326
GRAMS
15 2013 BUYERS GUIDE
299
GRAMS
CLASS
RMS
EFFICIENCY
150-300watts
70%
70%
68%
RMS
400-600watts
85%
85%
1CH / 2CH / 4CH
RMS
CLASS
EFFICIENCY
800-1000watts
EFFICIENCY
300-500watts
73%
101
GRAMS
BOOSTED RAIL
1CH / 2CH / 4CH
CLASS
300-1000watts
1CH / 2CH / 4CH
400-600watts
137
GRAMS
of a amplifier
Organizing the combination of parts that make up the guts of an amplifier tremendously
impacts their performance capabilities. A change in topology type matched with a variation
of power supply components deliver a higher power output and enhanced audio quality.
Rockford’s proprietary amplifier topologies and electrical technologies in our amplifier
lineup will drive your system to new heights.
HEAT SINK
MOSFETS
POWER SUPPLY
CIRCUIT BOARD
TERMINALS
MATERIAL HIEARCHY
RCA
BESt
Heat Sink - This heavy outer shell
protects the parts inside by transferring away the heat made reproducing
an audio signal (music).
MOSFETs - A type of transistor used
to amplify audio signal(music). You’ll
see more of these guys lined up as
wattage demands increase.
Circuit Board - Sometimes referred
to as the PCB, is used to connect
this-to-that through tiny lines of copper
across multiple layers of pathways.
Power Supply - A.K.A the transformer, as the name suggest it takes the
incoming voltage and converts it to a
useable voltage for speakers.
Terminals - These are the connection points for the speakers
or subwoofers and the power
source(battery) for the amplifier.
RCA - These are the connection
points for the audio signal(music)
coming from the audio source(radio).
RCA connectors are most commonly
used.
HEAT SINK
• Die-Cast Aluminum w/ DTM™
• Die-Cast Aluminum
• Extruded Aluminum
GOOD
TERMINALS
• C-Clamp compression
• Set-Screw
• Molex; Set-Screw or Pigtail
RCA
• Balanced Differential; HighLevel Capable with Auto
Turn-On
• Balanced Differential; HighLevel Capable
• Balanced Differential
Die-Cast Aluminum w/
DTM™
C-Clamp compression
Balanced Differential
TO-247 MOSFETs w/
MEHSA™
Ferrite Core Coated/Booted Transformer,
with CONSTANT POWER™
4 layer 3 oz. Copper Circuit
Board
Die-Cast Aluminum w/
DTM™
C-Clamp compression
Balanced Differential
TO-247 MOSFETs w/
MEHSA™
Ferrite Core Coated/Booted Transformer,
with CONSTANT POWER™
4 layer 3 oz. Copper
Circuit Board
•
•
•
•
MOSFETS
TO-247 MOSFETs w/ MEHSA™
TO-220 MOSFETs w/ MEHSA™
TO-220 MOSFETs
TO-220 Bipolar Transistors
POWER SUPPLY
• Ferrite Core Coated/Booted
Transformer, with CONSTANT
POWER™
• Ferrite Core Coated/Booted
Transformer
• Ferrite Core Transformer
• Storage Capacitor
CIRCUIT BOARD
• 4 layer 3 oz. Copper Circuit
Board
• 4 layer 2 oz. Copper Circuit
Board
• 2 layer 2 oz. Copper Circuit
Board
Die-Cast Aluminum w/
DTM™
C-Clamp compression
Balanced Differential; High-Level Capable
with Auto Turn -On
TO-220 MOSFETs w/
MEHSA™
Ferrite Core Coated/Booted
Transformer POWER™
4 layer 2 oz. Copper
Circuit Board
Extruded Aluminum
Molex; Set-Screw or Pigtail
Balanced Differential; High-Level Capable
with Auto Turn -On
TO-220 MOSFETs w/
MEHSA™
Storage Capacitor
MATERIAL HIEARCHY
4 layer 2 oz. Copper
Circuit Board
BESt
HEAT SINK
• Die-Cast Aluminum w/ DTM™
• Die-Cast Aluminum
• Extruded Aluminum
GOOD
TERMINALS
• C-Clamp compression
• Set-Screw
• Molex; Set-Screw or Pigtail
RCA
• Balanced Differential; HighLevel Capable with Auto
Turn-On
• Balanced Differential; HighLevel Capable
• Balanced Differential
Die-Cast Aluminum
Set-Screw
Balanced Differential;
High-Level Capable
TO-220 Bipolar Transistors
Ferrite Core Transformer
2 layer 2 oz. Copper
Circuit Board
full range
Die-Cast Aluminum
Set-Screw
Balanced Differential
TO-220 MOSFETs
Ferrite Core Transformer
2 layer 2 oz. Copper
Circuit Board
•
•
•
•
MOSFETS
TO-247 MOSFETs w/ MEHSA™
TO-220 MOSFETs w/ MEHSA™
TO-220 MOSFETs
TO-220 Bipolar Transistors
POWER SUPPLY
• Ferrite Core Coated/Booted
Transformer, with CONSTANT
POWER™
• Ferrite Core Coated/Booted
Transformer
• Ferrite Core Transformer
• Storage Capacitor
CIRCUIT BOARD
• 4 layer 3 oz. Copper Circuit
Board
• 4 layer 2 oz. Copper Circuit
Board
• 2 layer 2 oz. Copper Circuit
Board
S/N Ratio
Channel
Separation
Dimensions
<0.05%
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x
L11.41” (Small chassis)
T600-2
200x2 @ 4 ohms
300x2 @ 2 ohms
600x1 @ 4 ohms bridged
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x
L13.66” (Medium chassis)
T400-4
60x4 @ 4 ohms
100x4 @ 2 ohms
200x2 @ 4 ohms bridged
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x
L13.66” (Medium chassis)
T600-4
100x4 @ 4 ohms
150x4 @ 2 ohms
300x2 @ 4 ohms bridged
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x
L14.91” (Large chassis)
150x4 @ 4 ohms
150x4 @ 2 ohms
200x4 @ 1 ohm
300x2 @ 4 ohms bridged
400x2 @ 2 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 5V
>95dB
>50dB
T800-4ad
H 2.14” x W 8.14” x
L13.66” (Medium chassis)
Class ad w/ Constant
Power
20Hz - 20kHz
<1.0%
150mV - 5V
>95dB
>50dB
T1000-4ad
250x4 @ 4 ohms
250x4 @ 2 ohms
250x4 @ 1 ohm
500x2 @ 4 ohms bridged
500x2 @ 2 ohms bridged
H 2.14” x W 8.14” x
L14.91” (Large chassis)
Class ad w/ Constant
Power and 4/2/1
T500-1bdCP
300x1 @ 4 ohms
500x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 250Hz
<0.5%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x
L11.41” (Small chassis)
T1000-1bdCP
700x1 @ 4 ohms
1000x1 @ 2 ohms
1000x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x
L13.66” ( Medium c hassis)
T1500-1bdCP
1000x1 @ 4 ohms
1500x1 @ 2 ohms
1500x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x
L14.91” (Large chassis)
1500x1 @ 4 ohms
2500x1 @ 2 ohms
2500x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x
L21.9” (X-Large chassis)
P300X2
100x2 @ 4 ohms
150x2 @ 2 ohms
300x1 @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
P400X2
125x2 @ 4 ohms
200x2 @ 2 ohms
400x1 @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 11.0”
(Small chassis)
P500X2
150x2 @ 4 ohms
250x2 @ 2 ohms
500x1 @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 13.3”
(Medium chassis)
P1000X2
300x2 @ 4 ohms
500x2 @ 2 ohms
1000x1 @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 15.0”
(Large chassis)
P400X4
50x4 @ 4 ohms
100x4 @ 2 ohms
200x2 @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 11.0”
(Small chassis)
60x4 @ 4 ohms
125x4 @ 2 ohms
250x2 @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
H 2.4” x W 7.8” x L 13.3”
(Medium chassis)
75x4 + 200x1 @ 4 ohms
125x4 + 400x1 @ 2 ohms
N/A + 500x1 @ 1 ohm
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
>50dB
P300X1
200x1 @ 4 ohms
300x1 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
>105dB
P400X1
200x1 @ 4 ohms
400x1 @ 2 ohms
20Hz - 20kHz
<1.0%
150mV - 12V
P500X1bd
150x1 @ 4 ohms
300x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 250Hz
<1.0%
P1000X1bd
250x1 @ 4 ohms
500x1 @ 2 ohms
1000x1 @ 1 ohm
20Hz - 250Hz
100x2 @ 4 ohms
150x2 @ 2 ohms
300x1 @ 4 ohms bridged
T2500-1bdCP
P500X4
P1000X5
PBR300X2
PBR300X4
PBR300X1
PBR500X1
TRANS•ana
Variable
Crossover
Input Sensitivity
20Hz - 20kHz
Circuit Board
THD+N @
Rated Power
120x2 @ 4 ohms
200x2 @ 2 ohms
400x1 @ 4 ohms bridged
Topology
Frequency
Response
Rated Power
AMPLIFIER SPECIFICATIONS
T400-2
4 layer 3 oz. copper
circuit board
24 dB/oct - variable
High or Low Pass and
All Pass
Class bd w/ Constant
Power
4 layer 3 oz. copper
circuit board
24 dB/oct - variable
Low Pass
TRANS•ana
4 layer 2 oz. copper
circuit board
12 dB/oct - variable
High or Low Pass and
All Pass
H 2.4” x W 7.8” x L 15.0”
(Large chassis)
TRANS•ana &
Class bd
4 layer 2 oz. copper
circuit board
12 dB/oct - variable
High or Low Pass and
All Pass
12 dB/oct - fixed
infrasonic
N/A
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
TRANS•ana
4 layer 2 oz. copper
circuit board
>105dB
N/A
H 2.4” x W 7.8” x L 9.9”
(Mini chassis)
12 dB/oct - variable
High or Low Pass and
All Pass
150mV - 12V
>100dB
N/A
H 2.4” x W 7.8” x L 11.0”
(Small chassis)
<1.0%
150mV - 12V
>100dB
N/A
H 2.4” x W 7.8” x L 13.3”
(Medium chassis)
20Hz - 20kHz
<0.5%
150mV - 11V
>100dB
>50dB
H 1.5” x W 4.25” x L 6.75”
75x4 @ 4 ohms
20Hz - 20kHz
<0.5%
150mV - 11V
>100dB
>50dB
H 1.5” x W 4.25” x L 6.75”
75x1 @ 4 ohms
150x1 @ 2 ohms
300x1 @ 1 ohm
20Hz - 250Hz
<0.2%
150mV - 11V
>105dB
N/A
H 1.5” x W 4.25” x L 6.75”
175x1 @ 4 ohms
300x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 20kHz
<0.1%
150mV - 11V
>105dB
N/A
H 1.5” x W 4.25” x L 8.25”
Class bd
Class br
12 dB/oct - variable
Low Pass
6 layer 2 oz. copper
circuit board
12 dB/oct - 80Hz fixed
High or Low Pass and
All Pass
4 layer 2 oz. copper
circuit board
12 dB/oct - variable
Low Pass
Speaker
Terminals
Additional
Features
Focused mass die-cast heatsink /
DTM™- Dynamic Thermal Management / MEHSA™- Maximum
Efficiency HeatSink Application
Power
Terminals
Status
Indicators
Discrete light pipe Power,
Thermal and Protection
indicators
RCA Inputs
Protection
NOMAD circuit
• Reverse Polarity
• Short Circuit
• Thermal
• Low Impedance
• Under/Over Voltage
Heatsink
Design
Impedance
Stability
1 ohm stereo / 2 ohm mono
stable
Balanced differential RCA
inputs and RCA pass thru
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Punch EQ variable from 0dB
to +18dB @ 45Hz and/or
0dB to +12dB @ 12KHz with
optional PEQ
Balanced differential RCA
inputs and RCA pass thru
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Punch EQ variable from 0dB to
+18dB @ 45Hz with optional
Punch Equalization
Balanced differential panel
mount RCA and RCA pass
thru
stealth proprietary 1/0 Ga.
4mm allen head
set-screw cast
zinc connector
stealth
proprietary 8 Ga.
4mm allen head
set-screw cast
zinc connector
Punch EQ variable from 0dB to
+18dB @ 45Hz with optional
Punch Equalization and BDSync
or Master/Slave
High level capable with auto
turn-on balanced differential
RCA inputs and RCA pass
thru
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Punch EQ variable from 0dB to
+18dB @ 45Hz and/or 0dB to
+14dB @ 12.5KHz with optional
Punch Level Control(PLC2)
Differential RCA inputs
Differential RCA inputs and
RCA pass thru
Focused mass die-cast heatsink
/ 4-Point Thermal Monitoring /
MEHSA™- Maximum Efficiency
HeatSink Application
Differential RCA inputs
Differential RCA inputs and
RCA pass thru
1 ohm mono rated
NOMAD circuit
• Reverse Polarity
• Short Circuit
• Thermal
• Low Impedance
• Under/Over Voltage
Discrete light pipe Power,
Thermal and Protection
indicators
Focused mass die-cast heatsink /
DTM™- Dynamic Thermal Management / MEHSA™- Maximum
Efficiency HeatSink Application
Discrete light pipe Power,
Thermal and Protection
indicators / In Mold Roll LED
backlit signal/power Volume
Units meters
2 ohm stereo / 4 ohm mono
rated
NOMAD circuit
• Reverse Polarity
• Short Circuit
• Thermal
• Low Impedance
• Under/Over Voltage
Discrete light pipe Power,
Thermal and Protection
indicators
Focused mass die-cast heatsink /
DTM™- Dynamic Thermal Management / MEHSA™- Maximum
Efficiency HeatSink Application
High level capable with auto
turn-on balanced differential
RCA inputs
High level capable with auto
turn-on balanced differential
RCA inputs and RCA pass
thru
2 ohm stereo / 1 ohm mono
rated
NOMAD circuit
• Reverse Polarity
• Short Circuit
• Thermal
• Low Impedance
• Under/Over Voltage
Discrete light pipe Power,
Thermal and Protection
indicators
Focused mass die-cast heatsink /
DTM™- Dynamic Thermal Management / MEHSA™- Maximum
Efficiency HeatSink Application
High level capable with auto
turn-on balanced differential
RCA inputs
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Punch EQ variable from 0dB to
+18dB @ 45Hz and/or 0dB to
+14dB @ 12.5KHz with optional
Punch Level Control(PLC2)
2 ohm mono rated
NOMAD circuit
• Reverse Polarity
• Short Circuit
• Thermal
• Low Impedance
• Under/Over Voltage
Discrete light pipe Power,
Thermal and Protection
indicators
Focused mass die-cast heatsink /
DTM™- Dynamic Thermal Management / MEHSA™- Maximum
Efficiency HeatSink Application
High level capable with auto
turn-on balanced differential
RCA inputs and RCA pass
thru
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Punch EQ variable from 0dB to
+18dB @ 45Hz and/or 0dB to
+14dB @ 12.5KHz with optional
Punch Level Control(PLC2)
• Reverse Polarity
• Short Circuit
• Thermal
• Low Impedance
• Under/Over Voltage
LED Power/Protection and
boost mode indicators
Inter-locking extruded aluminum
heatsinks w/ pierced metal
recessed badge
RCA/Speaker level pigtailed
Molex connector with auto
turn-on
10 Ga. Molex
connector
16 Ga. pigtailed
Molex connector
Optional PEQ variable from 0dB
to +18dB @ 45Hz and/or 0dB to
+12dB @ 12KHz, variable highlevel adjust and 6V DC offset w/
remote out
1 ohm mono rated
2 ohm stereo / 4 ohm mono
rated
4 ohm stereo ONLY
Variable high-level adjust and
6V DC offset w/ remote out
1 ohm mono rated
Optional PEQ Variable from
0dB to +18dB @ 45Hz, variable
high-level adjust and 6V DC
offset w/ remote out
8 Ga. Molex
connector
12 Ga. pigtailed
Molex connector
S/N Ratio
Channel
Separation
<1.0%
150mV - 12V
>100dB
>50dB
R250X4
40x4 @ 4 ohms
60x4 @ 2 ohms
125x2 @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 12V
>100dB
>50dB
H 2.0” x W 6.8” x L 11.2”
R300X4
50x4 @ 4 ohms
75x4 @ 2 ohms
150x2 @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 12V
>100dB
>50dB
H 2.0” x W 6.8” x L 13.2”
R400-4D
75x4 @ 4 ohms
100x4 @ 2 ohms
200x2 @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 5V
>90dB
>50dB
H 2.0” x W 6.8” x L 9.1”
R600-4D
100x4 @ 4 ohms
150x4 @ 2 ohms
300x2 @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 5V
>90dB
>50dB
H 2.0” x W 6.8” x L 11.1”
50x4 + 200x1 @ 4 ohms
75x4 + 300x1 @ 2 ohms
150x2 + N/A @ 4 ohms bridged
20Hz - 20kHz
<1.0%
150mV - 12V
>100dB
>50dB
R250X1
150x1 @ 4 ohms
250x1 @ 2 ohms
20Hz - 250Hz
<1.0%
150mV - 12V
>100dB
R500X1D
300x1 @ 4 ohms
500x1 @ 2 ohms
20Hz - 250Hz
<1.0%
150mV - 12V
R750-1D
250x1 @ 4 ohms
500x1 @ 2 ohms
750x1 @ 1 ohm
20Hz - 250Hz
<1.0%
R1200-1D
400x1 @ 4 ohms
800x1 @ 2 ohms
1200x1 @ 1 ohm
20Hz - 250Hz
<1.0%
R600X5
23 2013 BUYERS GUIDE
Circuit Board
Input Sensitivity
20Hz - 20kHz
H 2.0” x W 6.8” x L 11.2”
Class ab
Single layer 2 oz. copper circuit board
Full Range Class d
4 layer 2 oz. copper
circuit board
H 2.0” x W 6.8” x L 13.2”
Class ab & Class d
Single layer 2 oz. copper circuit board
12 dB/oct - variable
High or Low Pass and
All Pass
N/A
H 2.0” x W 6.8” x L 11.2”
Class ab
Single layer 2 oz. copper circuit board
12 dB/oct - variable
Low Pass
>100dB
N/A
H 2.0” x W 6.8” x L 8.5”
Class d
150mV - 4V
>100dB
N/A
H 2.0” x W 6.8” x L 9.1”
4 layer 2 oz. copper
circuit board
150mV - 4V
>100dB
N/A
H 2.0” x W 6.8” x L 11.1”
12 dB/oct - variable
Low Pass
12 dB/oct - variable
infrasonic
Variable
Crossover
Topology
THD+N @
Rated Power
50x2 @ 4 ohms
75x2 @ 2 ohms
150x1 @ 4 ohms bridged
Dimensions
Frequency
Response
Rated Power
R150X2
12 dB/oct - variable
High or Low Pass and
All Pass
Speaker
Terminals
Additional
Features
Focused mass die-cast heatsink
Power
Terminals
Status
Indicators
LED Power and Protection
indicators
RCA Inputs
Protection
• Short Circuit
• Thermal
Heatsink
Design
Impedance
Stability
2 ohm stereo / 4 ohm mono
rated
RCA or speaker level pigtailed Molex connector input
and RCA pass thru
4 Ga. set-screw
connector
10 Ga. set-screw
connector
Punch EQ variable from 0dB to
+12dB @ 45Hz
RCA input or speaker level
pigtailed Molex connector
input
Punch EQ selectable from
0dB/+6dB/+12dB @ 45Hz
RCA input and RCA pass thru
Punch EQ variable from 0dB to
+18dB @ 45Hz
2 ohm stereo / 4 ohm mono
rated(Front/Rear) and 2 ohm
mono rated(Sub)
• Short Circuit
• Thermal
LED Power and Protection
indicators
Focused mass die-cast heatsink
RCA input or speaker level
pigtailed Molex connector
input
4 Ga. set-screw
connector
10 Ga. set-screw
connector
Punch EQ selectable
from 0dB/+6dB/+12dB @
45Hz(Front/Rear) and Variable from 0dB to +12dB @
45Hz(Sub)
2 ohm mono rated
• Short Circuit
• Thermal
LED Power and Protection
indicators
Focused mass die-cast heatsink
RCA or speaker level pigtailed Molex connector input
and RCA pass thru
4 Ga. set-screw
connector
10 Ga. set-screw
connector
Punch EQ variable from 0dB to
+12dB @ 45Hz and included
Punch Level Control(PLC)
1 ohm mono rated
RCA input and RCA pass thru
ROCKFORDFOSGATE.COM
Don’t forget to use our Woofer Wiring Wizard to properly
wire woofers to your amplifier or our Amp Wire Calculator to
optimize output with properly sized wire.
Punch EQ variable from 0dB to
+18dB @ 45Hz and included
Punch Level Control(PLC)
SUBWOOFER
WE’VE RAISED THE BAR...AGAIN
YEAR
WATTS
1200
”
1 4
44
UP TO
RMS POWER
HANDLING
LIMITED
WARRANTY
M
M
VOICE COIL
XMAX
PEAK TO PEAK
DON’T JUST REACH YOUR SYSTEM’S POTENTIAL
YEAR
WATTS
600
”
1 2.5
28
UP TO
RMS POWER
HANDLING
LIMITED
WARRANTY
VOICE COIL
M
M
XMAX
PEAK TO PEAK
PERFECT STEP INTO PERFORMANCE AUDIO
YEAR
WATTS
250
”
1 2
13
LIMITED
WARRANTY
M
M
UP TO
RMS POWER
HANDLING
VOICE COIL
XMAX
PEAK TO PEAK
27 2013 BUYERS GUIDE
T0 Subwoofers include an intergrated/removable grille.
T1 Subwoofers include an intergrated/removable grille.
DUAL 2Ω
DUAL 4Ω
DUAL 2Ω
DUAL 4Ω
DUAL 2Ω
DUAL 4Ω
DUAL 2Ω
DUAL 4Ω
29 2013 BUYERS GUIDE
DUAL 2Ω
DUAL 4Ω
OPTIONAL
ENCLOSURE
and / or
GRILLE
Optional integrated grille available for ALL PUNCH subwoofers. Loaded encolsures available for all
10” or 12” PUNCH subwoofers and 8”, 10” or 12” PUNCH SHALLOW subwoofers.
SINGLE 2Ω
SINGLE 4Ω
DUAL 2Ω
DUAL 4Ω
SHALLOW
31 2013 BUYERS GUIDE
DUAL 2Ω
DUAL 4Ω
SINGLE 4Ω
OPTIONAL
ENCLOSURE
Loaded encolsures available for all 10” or 12” PRIME R1 and R2 Shallow subwoofers.
DUAL 2Ω
DUAL 4Ω
SHALLOW
PROPRIETARY
ROCKFORD TECHNOLOGY
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has
lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and
make it Rockford.
VERTICAL ATTACH SURROUND TECHNIQUE
Rockford’s proprietary surround technique, VAST, provides up to a 25% increase in
the speakers effective radiating cone area without complicated installation issues.
This design alters the typical design and manufacturing technique by eliminating the
large flat glue surface area (the landing) which allows the surround to be shifted for
increased cone area. In turn, both nominal efficiency and maximum output capabilities
are dramatically improved.
Products Featuring VAST
SHALLOW
SHALLOW
FLEX FIT
The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible)
instead of single screw sized holes. This allows slight adjustment of the speaker when
mounted.
Products Featuring FLEX FIT
SHALLOW
SHALLOW
YOUTUBE.COM/ROCKFORDFOSGATE
WATCH DETAILED VIDEOS ON OUR SUBWOOFER TECHNOLOGIES.
33 2013 BUYERS GUIDE
SELECTABLE WOOFER IMPEDANCE FUSED TERMINATION
Removing and inverting the center plug allows nominal impedance of voice coils
to quickly be configured in a Series or Parallel wiring configuration. This removable
impedance selection jumper also provides fused protection in severe overload
conditions.
Products Featuring SWIFT
SHALLOW
SHALLOW
INDUCTIVE DAMPING HEAT SINK
Secures directly to the top of magnet structure to improve system efficiency by
reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to
reduce voice coil temperature.
Products Featuring IDHS
SHALLOW
SHALLOW
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry
standards. This means your speaker has the capacity to handle power under continuous
demand, not instantaneous power handling that over time can damage voice coils.
Products Compliant with CEA
SHALLOW
SHALLOW
VERIFIED WITH KLIPPEL
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker
engineering personnel must be trained and certified by Klippel prior to using the three
separate Klippel systems to design, develop and test.
•
•
•
Klippel DA-2 (Designed)
Klippel PM-8 (Developed)
Klippel QC (Tested)
Products Verified with KLIPPEL
SHALLOW
SHALLOW
SUBWOOFER PERFORMANCE LINEUP
SPL - Sound Pressure Level numbers reflect an incar response utilizing dual subwoofers in a typical
sedan size cabin at peak power.
SPL
XMAX
OUTWARD
EXCURSION
PEAK
POWER
Sound
Pressure
Level
148dB
Sound
Pressure
Level
144dB
Sound
Pressure
Level
140dB
Sound
Pressure
Level
137dB
35 2013 BUYERS GUIDE
REST
=
INWARD
EXCURSION
XMAX - The measured excursion of the subwoofer
in one direction, with Peak-to-Peak covering its entire travel. The more air a woofer moves the higher
the SPL.
PEAK POWER - The maximum amount of amplifier
power that can be applied to a subwoofer prior to
entering into an unsafe operating scenario.
PEAK
POWER
X-MAX
PEAK TO PEAK
PEAK
POWER
X-MAX
PEAK TO PEAK
PEAK
POWER
X-MAX
PEAK TO PEAK
PEAK
POWER
X-MAX
PEAK TO PEAK
Sound
Pressure
Level
135dB
Sound
Pressure
Level
133dB
Sound
Pressure
Level
132dB
Sound
Pressure
Level
129dB
PEAK
POWER
X-MAX
PEAK TO PEAK
PEAK
POWER
X-MAX
PEAK TO PEAK
PEAK
POWER
X-MAX
PEAK TO PEAK
PEAK
POWER
X-MAX
PEAK TO PEAK
S H A L L O W
Sound
Pressure
Level
133dB
SHALLOW
Sound
Pressure
Level
130dB
SHALLOW
PEAK
POWER
X-MAX
PEAK TO PEAK
PEAK
POWER
X-MAX
PEAK TO PEAK
of a subwoofer
Variations in the anatomy of a subwoofer dramatically changes their performance
characteristics. An increase in voicecoil size coupled with a stronger cone material yields
a higher power handling and increased output. By combining quality materials with
Rockford’s proprietary acoustic technologies, our subwoofer lineup is sure to meet your
system’s demands.
SURROUND
CONE
BASKET
SPIDER
VOICE COIL
MATERIAL HIEARCHY
MAGNET
BESt
GOOD
Basket - Also referred to as the frame
or chassis, this is the skeletal system
of the speaker. Here to keep everything in its place.
Surround - First part in the speakers
suspension, attached to the cone to
maintain the centering of the voice
coil in the magnetic gap.
Spider - Second part of the speakers
suspension, connects the cone and
voice coil to the basket and controls
the travel of the cone assembly.
Cone - A.K.A the diaphragm, this is
the voice of the speaker. Shape and
material dramatically change tonality.
Voice Coil - The brains of the operation, directing the force from the
magnet to push or pull based on the
applied electrical signal.
Magnet - The heart of speaker, creating the force to push and pull cone
assembly. Size, material, and design
may differ, depending on performance goals.
SURROUND
• Tall Profile, Santoprene™ w/
VAST™
• M-Roll, Santoprene™ w/
VAST™
• Tall Profile, Santoprene™
• Half-Roll, Nitrile Butadiene
Rubber
• Half-Roll, Sealed Polyetherester Foam
CONE
• Hard Anodized Aluminum
• Kevlar Fiber Paper w/ Hard
Anodized Aluminum dustcap
• Kevlar Fiber Paper
• Injection Molded Polypropylene
• Polypropylene
SPIDER
• Dual Mirror Imaged w/
Stitched Lead Wire and Cooling Vents
• Dual Laminated w/ Embedded Lead Wire Cooling Vents
• Single w/ Stitched Lead Wire
and Cooling Vents
• Single Spider
Tall Profile, Santoprene™
Hard Anodized Aluminum
Dual Mirror Imaged w/ Stitched Lead
Wire and Cooling Vents
4” 4-Layer High Temp. Aluminum
w/ NomexTM collar
Die Cast Aluminum
Triple Stack Ferrite Magnet
w/ IDHSTM
Tall Profile, Santoprene™
w/ VAST™
Kevlar Fiber Paper/ Hard
Anodized Aluminum
Dual Mirror Imaged w/ Stitched Lead
Wire and Cooling Vents
3” 4-Layer High Temp.Aluminum w/
NomexTM collar
Die-Cast Aluminum
w/ FlexFitTM
Double Stack Ferrite
Magnet w/ IDHSTM
VOICE COIL
• 4” 4-Layer High Temp. Aluminum w/
NomexTM collar
• 3” 4-Layer High Temp. Aluminum w/
NomexTM collar
• 2.50” 4-Layer High Temp. Aluminum
w/ NomexTM collar
• 2.25” 4-Layer High Temp. Aluminum
w/ NomexTM collar
• 2” 4-Layer High Temp. Aluminum w/
NomexTM collar
BASKET
• Die-Cast Aluminum w/ FlexFitTM
• Die-Cast Aluminum
• StampCastTM w/ FlexFitTM
• Stamped Steel
MAGNET
• Triple Stack Ferrite Magnet w/
IDHSTM
• Double Stack Ferrite Magnet
w/ IDHSTM
• Double Stack Ferrite Magnet
• Single Ferrite Magnet
Tall Profile, Santoprene™
w/ VAST™
Kevlar Fiber Paper/ Hard
Anodized Aluminum
Dual Mirror Imaged w/ Stitched Lead
Wire and Cooling Vents
3” 4-Layer High Temp. Aluminum
w/ NomexTM collar
Die-Cast Aluminum
w/ FlexFitTM
Double Stack Ferrite Magnet
Tall Profile, Santoprene™
w/ VAST™
Hard Anodized Aluminum
Dual Mirror Imaged w/ Stitched Lead
Wire and Cooling Vents
2.50” 4-Layer High Temp. Aluminum w/
NomexTM collar
StampCastTM w/ FlexFitTM
MATERIAL HIEARCHY
Double Stack Ferrite Magnet
BESt
GOOD
SURROUND
• Tall Profile, Santoprene™ w/
VAST™
• M-Roll, Santoprene™ w/
VAST™
• Tall Profile, Santoprene™
• Half-Roll, Nitrile Butadiene
Rubber
• Half-Roll, Sealed Polyetherester Foam
CONE
• Hard Anodized Aluminum
• Kevlar Fiber Paper w/ Hard
Anodized Aluminum dustcap
• Kevlar Fiber Paper
• Injection Molded Polypropylene
• Polypropylene
SPIDER
• Dual Mirror Imaged w/
Stitched Lead Wire and Cooling Vents
• Dual Laminated w/ Embedded Lead Wire Cooling Vents
• Single w/ Stitched Lead Wire
and Cooling Vents
• Single Spider
Tall Profile, Santoprene™
w/ VAST™
Kevlar Fiber Paper
Dual Mirror Imaged w/ Stitched Lead
Wire and Cooling Vents
2.25” 4-Layer High Temp. Aluminum w/
NomexTM collar
StampCastTM w/ FlexFitTM
Double Stack Ferrite Magnet
Half-Roll, Nitrile Butadiene
Rubber
Kevlar Fiber Paper
Single Stitched Lead Wire and Cooling
Vents
2” 4-Layer High Temp. Aluminum w/
NomexTM collar
StampCastTM w/ FlexFitTM
Single Stack Ferrite Magnet
VOICE COIL
• 4” 4-Layer High Temp. Aluminum w/
NomexTM collar
• 3” 4-Layer High Temp. Aluminum w/
NomexTM collar
• 2.50” 4-Layer High Temp. Aluminum
w/ NomexTM collar
• 2.25” 4-Layer High Temp. Aluminum
w/ NomexTM collar
• 2” 4-Layer High Temp. Aluminum w/
NomexTM collar
BASKET
• Die-Cast Aluminum w/ FlexFitTM
• Die-Cast Aluminum
• StampCastTM w/ FlexFitTM
• Stamped Steel
MAGNET
• Triple Stack Ferrite Magnet w/
IDHSTM
• Double Stack Ferrite Magnet
w/ IDHSTM
• Double Stack Ferrite Magnet
• Single Ferrite Magnet
Half-Roll, Sealed
Polyether-ester Foam
Polypropylene
Single Spider
2” 4-Layer High Temp. Aluminum
w/ NomexTM collar
Stamped Steel
Single Ferrite Magnet
Half-Roll, Nitrile
Butadiene Rubber
Polypropylene
Single Spider
2” 4-Layer High Temp. Aluminum w/
NomexTM collar
StampCast
MATERIAL HIEARCHY
Single Ferrite Magnet
BESt
GOOD
SURROUND
• Tall Profile, Santoprene™ w/
VAST™
• M-Roll, Santoprene™ w/
VAST™
• Tall Profile, Santoprene™
• Half-Roll, Nitrile Butadiene
Rubber
• Half-Roll, Sealed Polyetherester Foam
CONE
• Hard Anodized Aluminum
• Kevlar Fiber Paper w/ Hard
Anodized Aluminum dustcap
• Kevlar Fiber Paper
• Injection Molded Polypropylene
• Polypropylene
SPIDER
• Dual Mirror Imaged w/
Stitched Lead Wire and Cooling Vents
• Dual Laminated w/ Embedded Lead Wire Cooling Vents
• Single w/ Stitched Lead Wire
and Cooling Vents
• Single Spider
SHALLOW
M-Roll, Santoprene™
w/ VAST™
Hard Anodized Aluminum
Dual Laminated w/ Embedded Lead Wire
and Cooling Vents
2.50” 4-Layer High Temp. Aluminum w/
NomexTM collar
StampCastTM w/ FlexFitTM
Single Ferrite Magnet
SHALLOW
Half-Roll, Sealed Polyether-ester
Foam
Injection Molded Polypropylene
Single Spider
2” 4-Layer High Temp. Aluminum w/
NomexTM collar
Stamped Steal
Single Ferrite Magnet
VOICE COIL
• 4” 4-Layer High Temp. Aluminum w/
NomexTM collar
• 3” 4-Layer High Temp. Aluminum w/
NomexTM collar
• 2.50” 4-Layer High Temp. Aluminum
w/ NomexTM collar
• 2.25” 4-Layer High Temp. Aluminum
w/ NomexTM collar
• 2” 4-Layer High Temp. Aluminum w/
NomexTM collar
BASKET
• Die-Cast Aluminum w/ FlexFitTM
• Die-Cast Aluminum
• StampCastTM w/ FlexFitTM
• Stamped Steel
MAGNET
• Triple Stack Ferrite Magnet w/
IDHSTM
• Double Stack Ferrite Magnet
w/ IDHSTM
• Double Stack Ferrite Magnet
• Single Ferrite Magnet
Sensitivity
RMS Power
Handling
(watts)
Peak Power
Handling
(watts)
Mounting
Diameter
Mounting
Depth
Speaker
Displacement
(cu. ft.)
Sealed Enclosure (cu. ft.)
22.08
85 dB
1200
2400
10.8"
9.0"
0.151
N/A
T2D215/T2D415
15”
Dual 2 Ω or 4 Ω
22.0
87 dB
1200
2400
13.94"
10.0"
0.176
N/A
2.75 cu ft. Port: (1) 6”x17”
T1D210/T1D410
10”
Dual 2 Ω or 4 Ω
16.4
83 dB
600
1200
9.13"
6.5"
0.203
0.75
1.50 cu ft. Port: (1) 4”x11”
T1D212/T1D412
12”
Dual 2 Ω or 4 Ω
16.4
86 dB
800
1600
11.25"
6.9"
0.308
1.25
1.75 cu ft. Port: (1) 4”x9”
T1D215/T1D415
15”
Dual 2 Ω or 4 Ω
16.4
88 dB
1000
2000
13.94"
8.4"
0.547
2.25
2.66 cu ft. Port: (1) 4”x10”
T0D210/T0D410
10”
Dual 2 Ω or 4 Ω
14.8
81 dB
550
1100
9.13"
6.5"
0.203
0.75
1.50 cu ft. Port: (1) 4”x11”
T0D212/T0D412
12”
Dual 2 Ω or 4 Ω
14.8
84 dB
700
1400
11.25"
6.9"
0.308
1.25
1.75 cu ft. Port: (1) 4”x9”
T0D215/T0D415
15”
Dual 2 Ω or 4 Ω
14.8
87 dB
800
1600
13.94"
8.4"
0.547
2.25
2.66 cu ft. Port: (1) 4”x10”
P3D2-10/P3D4-10
10”
Dual 2 Ω or 4 Ω
13.9
82 dB
500
1000
9.13"
6.2"
0.127
0.59
1.40 cu ft. Port: (1) 4”x14”
P3D2-12/P3D4-12
12”
Dual 2 Ω or 4 Ω
13.9
85 dB
600
1200
11.25"
6.7"
0.194
1.02
1.79 cu ft. Port: (1) 4”x10”
P3D2-15/P3D4-15
15”
Dual 2 Ω or 4 Ω
13.9
86 dB
600
1200
13.94"
7.6"
0.247
1.58
2.66 cu ft. Port: (1) 4”x10”
8”
Dual 2 Ω or 4 Ω
7.8
83 dB
250
500
7.13"
4.8"
0.071
0.23
0.65 cu ft. Port: (1) 2”x8”
P2D2-10/P2D4-10
10”
Dual 2 Ω or 4 Ω
11
84 dB
300
600
9.13"
5.9"
0.088
0.59
1.40 cu ft. Port: (1) 4”x14”
P2D2-12/P2D4-12
12”
Dual 2 Ω or 4 Ω
13.3
86 dB
400
800
11.25"
6.4"
0.170
1.02
1.79 cu ft. Port: (1) 4”x10”
P2D2-15/P2D4-15
15”
Dual 2 Ω or 4 Ω
13.3
86 dB
400
800
13.94"
7.3"
0.219
1.58
2.66 cu ft. Port: (1) 4”x10”
8”
Single 2 Ω or 4 Ω
7.6
83.5 dB
200
400
7.13"
4.4"
0.053
0.23
0.65 cu ft. Port: (1) 2”x6”
P1S2-10/P1S4-10
10”
Single 2 Ω or 4 Ω
9.4
85 dB
250
500
9.13"
5.3"
0.085
0.59
1.40 cu ft. Port: (1) 3”x8”
P1S2-12/P1S4-12
12”
Single 2 Ω or 4 Ω
9.4
86 dB
250
500
11.25"
6.0"
0.113
1.02
1.79 cu ft. Port: (1) 3”x6”
P1S2-15/P1S4-15
15”
Single 2 Ω or 4 Ω
9.4
87.5 dB
250
500
13.94"
7.0"
0.191
1.58
2.66 cu ft. Port: (1) 4”x8”
R2D2-10/R2D4-10
10”
Dual 2 Ω or 4 Ω
6.5
89 dB
250
500
9.13"
4.3"
0.101
0.59
1.40 cu ft. Port: (1) 4”x13”
R2D2-12/R2D4-12
12”
Dual 2 Ω or 4 Ω
6.5
87 dB
250
500
11.25"
5.1"
0.150
1.02
1.79 cu ft. Port: (1) 4”x9.3”
R1S410
10”
Single 4 Ω
5.8
86 dB
150
300
9.13"
4.6"
0.024
0.75
N/A
R1S412
12”
Single 4 Ω
6.3
87 dB
150
300
10.94"
5.0"
0.043
1.02
N/A
8”
Dual 2 Ω or 4 Ω
8.4
82 dB
150
300
7.13”
2.7”
0.040
0.25
0.75 cu ft. Port: (1) 3”x9”
P3SD2-10/P3SD4-10
10”
Dual 2 Ω or 4 Ω
8.4
83 dB
300
600
9.13”
3.5”
0.074
0.50
1.00 cu ft. Port: (1) 4”x12”
P3SD2-12/P3SD4-12
12”
Dual 2 Ω or 4 Ω
8.4
85 dB
400
800
11.25”
3.7”
0.086
1.00
1.25 cu ft. Port: (1) 4”x12”
R2SD2-10/R2SD4-10
10”
Dual 2 Ω or 4 Ω
8
83 dB
200
400
9.13"
3.4"
0.037
0.70
1.40 cu ft. Port: (1) 4”x13.7”
R2SD2-12/R2SD4-12
12”
Dual 2 Ω or 4 Ω
10
85 dB
250
500
11.25"
3.6"
0.039
0.90
1.79 cu ft. Port: (1) 4”x11.8”
P2D2-8/P2D4-8
P1S2-8/P1S4-8
P3SD2-8/P3SD4-8
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
P3-2X12
(2) P3D4-12
1Ω
1200 Watts
2400 Watts
15.125” x 33.875” x 15.75”
P3-1X12
(1) P3D2-12
1Ω
600 Watts
1200 Watts
15.125” x 19.125” x 15.75”
P3-2X10
(2) P3D4-10
1Ω
1000 Watts
2000 Watts
13.125” x 31.125” x 15.125”
Dustcap
Material
Xmax (mm)
Dual 2 Ω or 4 Ω
Surround
Material
Nominal
Impedance
12”
Ported
Enclosure
Speaker Size
SUBWOOFER SPECIFICATIONS
SHALLOW
T2D212/T2D412
2.00 cu ft. Port: (3) 3”x12”
Tall profile, high density
Santoprene™
Hard anodized
aluminum
Tall profile, Santoprene™
with VAST™
Hard anodized
aluminum
Tall profile, Santoprene™
with VAST™
Hard anodized
aluminum
Tall profile, Santoprene™
with VAST™
Hard anodized
aluminum
Tall profile, Santoprene™
with VAST™
Kevlar fiber reinforced
semi-pressed paper
Half-roll, high density
Nitrile Butadiene Rubber
Kevlar fiber reinforced
semi-pressed paper
Half-roll, Sealed
Polyether-ester foam
Polypropylene
Half-roll, Nitrile Butadiene Rubber
Polypropylene
M-roll, Santoprene™ with
VAST™
Hard anodized
aluminum
Half-roll, Sealed
Polyether-ester foam
Injection molded
Polypropylene
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
P1-2X12
(2) P1S4-12
2Ω
500 Watts
1000 Watts
15.125” x 33.875” x 15.75”
P1-1X12
(1) P1S4-12
4Ω
250 Watts
500 Watts
15.125” x 19.125” x 15.75”
P1-2X10
(2) P1S4-10
2Ω
500 Watts
1000 Watts
13.125” x 31.125” x 15.125”
P1-1X10
(1) P1S4-10
4Ω
250 Watts
500 Watts
13.125” x 17.0” x 15.125”
P3-1X10
(1) P3D2-10
1Ω
500 Watts
1000 Watts
13.125” x 17.0” x 15.125”
P2-2X12
(2) P2D4-12
1Ω
800 Watts
1600 Watts
15.125” x 33.875” x 15.75”
R1L-1X10
(1) R1S410
4Ω
150 Watts
300 Watts
12.0” x 15.825” x 12.25”
P2-1X12
(1) P2D2-12
1Ω
400 Watts
800 Watts
15.125” x 19.125” x 15.75”
R1L-2X10
(2) R1S410
2Ω
300 Watts
600 Watts
12.0” x 30.0” x 12.25”
P2-2X10
(2) P2D4-10
1Ω
600 Watts
1200 Watts
13.125” x 31.125” x 15.125”
R1L-1X12
(1) R1S412
4Ω
150 Watts
300 Watts
14.0” x 17.5” x 12.25”
P2-1X10
(1) P2D2-10
1Ω
300 Watts
600 Watts
13.125” x 17.0” x 15.125”
R1L-2X12
(2) R1S412
2Ω
300 Watts
600 Watts
14.0” x 33.75” x 12.25”
43 2013 BUYERS GUIDE
Motor
Structure
Motor Cover
Terminal
Connectors
Die-cast aluminum
Triple stack ferrite magnet with
extended vented pole and bumped
vented backplate with IDHS™
Die-cast motor
cover/heat
sink
Dual 8 Ga. custom
insulated/isolated
compression style
Reversible die-cast aluminum w/ Soft Touch paint
Kevlar® fiber
reinforced semipressed paper
3" 4-layer ultra-high temp. aluminum
voice coil with spun-laced Nomex™
insulating reinforcement collar
Dual mirror imaged, progressive roll tear
& fatigue resistant poly-cotton spider with
multipoint stitched lead wire technique and
proprietary spider cooling vents
Die-cast aluminum
with FlexFit™
Double stack ferrite magnet with
extended vented pole and bumped
vented backplate with IDHS™
Frame
integrated
Dual 10 Ga.
proprietary SWIFT™
terminal
Reversible die-cast
aluminum w/ Soft Touch
paint and integrated/removable grille
Kevlar® fiber
reinforced semipressed paper
3" 4-layer ultra-high temp. aluminum
voice coil with spun-laced Nomex™
insulating reinforcement collar
Dual mirror imaged, progressive roll tear
& fatigue resistant poly-cotton spider with
multipoint stitched lead wire technique and
proprietary spider cooling vents
Die-cast aluminum
with FlexFit™
Double stack ferrite magnet with
extended vented pole and bumped
vented backplate
Frame
integrated
Dual 10 Ga.
proprietary SWIFT™
terminal
Reversible die-cast
aluminum w/ Soft Touch
paint and integrated/removable grille
Hard anodized
aluminum
2.5" 4-layer ultra-high temp.
aluminum voice coil with spun-laced
Nomex™ insulating reinforcement
collar
Dual mirror imaged, progressive roll tear
& fatigue resistant poly-cotton spider with
multipoint stitched lead wire technique and
proprietary spider cooling vents
StampCast™ with
FlexFit™
Double stack ferrite magnet with
extended vented pole and bumped
vented backplate.
Removable
Semi-flexible
Polyvinyl Chloride (PVC)
8 Ga. custom
insulated/isolated
compression style
Reversible die-cast aluminum w/ Soft Touch paint
and optional integrated grille
Kevlar® fiber
reinforced semipressed paper
2.25" 4-layer high temp. aluminum
voice coil with spun-laced Nomex™
insulating reinforcement collar
Dual mirror imaged, progressive roll tear
& fatigue resistant poly-cotton spider with
multipoint stitched lead wire technique and
proprietary spider cooling vents
StampCast™ with
FlexFit™
Double stack ferrite magnet
structure with extended vented
pole and bumped backplate.
Removable
Semi-flexible
Polyvinyl Chloride (PVC)
8 Ga. custom
insulated/isolated
compression style
Reversible die-cast aluminum w/ Soft Touch paint
and optional integrated grille
Kevlar® fiber
reinforced semipressed paper
2" 4-layer high temp. aluminum
voice coil with spun-laced Nomex™
insulating reinforcement collar
Tear & fatigue resistant poly-cotton spider
with multipoint stitched lead wire technique
and proprietary spider cooling vents.
StampCast™ with
FlexFit™
Ferrite magnet structure with
extended vented pole and bumped
backplate.
Removable
Semi-flexible
Polyvinyl Chloride (PVC)
8 Ga. custom
insulated/isolated
compression style
Reversible Acrylonitrile
Butadiene Styrene with
optional integrated grille
Polypropylene
2" 4-layer high temp. aluminum
voice coil with spun-laced Nomex™
insulating reinforcement collar
Tear & fatigue resistant poly-cotton spider
with multipoint stitched lead wire technique
and spider cooling vents.
Stamped steel
Ferrite magnet structure with
extended vented pole and bumped
backplate.
Removable
Semi-flexible
Polyvinyl Chloride (PVC)
Standard 10 Ga.
Integrated Polyvinyl
Chloride trim ring
Polypropylene
2" 4-layer high temp. aluminum
voice coil with spun-laced Nomex™
insulating reinforcement collar
Tear & fatigue resistant poly-cotton spider
Stamped steel
Ferrite magnet structure with
extended vented pole and bumped
backplate.
Hard anodized
aluminum
2.5” 4-layer ultra-high temp.
aluminum voice coil with spun-laced
Nomex™ insulating reinforcement
collar
Dual laminated, progressive roll tear &
fatigue resistant poly-cotton spiders with embedded lead wire technique and proprietary
spider cooling vents
StampCast™ with
FlexFit™
Ferrite magnet structure with
extended vented pole and bumped
vented backplate.
Injection molded
Polypropylene
2" 4-layer high temp. aluminum
voice coil with spun-laced Nomex™
insulating reinforcement collar
Tear & fatigue resistant poly-cotton spider
with multipoint stitched lead wire technique
and spider cooling vents.
Stamped steel
Ferrite magnet structure with
extended vented pole and bumped
backplate.
Spider
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
P3S-1X10
(1) P3SD2-10
1Ω
300 Watts
600 Watts
13.5" x 19.0" x 5.3"/3.3"
P3S-1X12
(1) P3SD2-12
1Ω
400 Watts
800 Watts
13.5" x 27.4" x 5.3"/3.3"
Trim Ring
Frame
Structure
Dual mirror imaged, progressive roll tear
& fatigue resistant poly-cotton spider with
multipoint stitched lead wire technique
Voice Coil
4" 4-layer ultra-high temp. aluminum
flat-wound voice coil with spun-laced
Nomex™ insulating reinforcement
collar
Cone
Material
Hard anodized
aluminum
Standard 10 Ga.
Removable
Semi-flexible
Polyvinyl Chloride (PVC)
8 Ga. custom
insulated/isolated
compression style
Reversible die-cast aluminum w/ Soft Touch paint
and optional grille
Standard 10 Ga.
Integrated Polyvinyl
Chloride trim ring
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
R2S-1X10
(1) R2SD4-10
2Ω
200 Watts
400 Watts
13.5” x 19.0” x 5.3”/3.3”
R2S-1X12
(1) R2SD4-12
2Ω
250 Watts
500 Watts
13.5” x 27.4” x 5.3”/3.3”
ROCKFORDFOSGATE.COM
Don’t forget to use our Woofer Wiring Wizard to properly
wire woofers to your amplifier or our Woofer Box Advisor for
optimized enclosure bass performance.
SPEAKERS
150
1
WATTS
ONCE YOU HEAR THEM...YOU’LL KNOW
UP TO
RMS POWER
HANDLING
YEAR
LIMITED
WARRANTY
45 - 40
Hz
kHz
FREQUENCY
RESPONSE
DON’T JUST LISTEN TO YOUR MUSIC, FEEL IT
YEAR
WATTS
75
1
UP TO
RMS POWER
HANDLING
LIMITED
WARRANTY
60 - 24
Hz
kHz
FREQUENCY
RESPONSE
THE PERFECT FACTORY SPEAKER REPLACEMENT
YEAR
WATTS
60
1
UP TO
RMS POWER
HANDLING
LIMITED
WARRANTY
65 - 22
Hz
kHz
FREQUENCY
RESPONSE
2WAY
6.5 Inch
COMPONENTS
2WAY
6.5 Inch
2WAY
6.5 Inch
5.25 Inch
Tweeter Kit
2WAY
6.75 Inch
6.5 Inch
6.0 Inch
5.25 Inch
Tweeter Kit
47 2013 BUYERS GUIDE
2WAY
6.75 Inch
6.5 Inch
6 Inch
5.25 Inch
4 Inch
2WAY
6x9 Inch
6x8 Inch
5x7 Inch
4x6 Inch
3WAY
6x9 Inch
COAXIALS
2WAY
6.75 Inch
6.5 Inch
6.0 Inch
5.25 Inch
Tweeter Kit
49 2013 BUYERS GUIDE
COMPONENTS
3WAY
2WAY
6.5 Inch 4.0 Inch
6.75 Inch
6.0 Inch 3.5 Inch
5.25 Inch Tweeter Kit
2WAY
6x9 Inch
5x7 Inch
4x6 Inch
3WAY
6x8 Inch
4WAY
6x9 Inch
COAXIALS
HIGH OUTPUT
EXTREME LEVELS OF MID TO HIGH RANGE WILL BE EXPERIENCED
SCENARIOS TO CONSIDER WHEN USING
THIS PRODUCT:
A superior sensitivity yields low power (Watts)
requirements.
To all the Rockford Fosgate Fanatics we would
like to introduce the speakers to accompany your
two strapped T2500-1bdCP pushing (4) T2 15’s…
the PUNCH PRO speakers are guaranteed to
provide HIGH OUTPUT full range for extreme SQL
(Sound Quantity Level) systems.
Their unique structure gives opportunity to an equally
unique fitment.
It is HIGHLY encouraged to incorporate a generous quantity
of this product in one application for a preferred outcome.
CROSSOVER
4 ohm
8 ohm
TWEETER
1.5 Inch
MIDRANGE
6 Inch
8 Inch
10 Inch
COMPONENTS
2WAY
6.75 Inch
6.5 Inch
6 Inch
5.25 Inch
Tweeter Kit
COMPONENTS
2WAY
6.75 Inch
5.25 Inch
4 Inch
3WAY
6.5 Inch
2WAY
6x9 Inch
6x8 Inch
3WAY
6x9 Inch
COAXIALS
PROPRIETARY
ROCKFORD TECHNOLOGY
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has
lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and
make it Rockford.
VERTICAL ATTACH SURROUND TECHNIQUE
Rockford’s proprietary surround technique, VAST, provides up to a 25% increase in
the speakers effective radiating cone area without complicated installation issues. This
design alters the typical design and manufacturing technique by eliminating the large flat
glue surface area (the landing) which allows the surround to be shifted for increased cone
area. In turn, both nominal efficiency and maximum output capabilities are dramatically
improved.
Products Featuring VAST
FLEX FIT
The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible)
instead of single screw sized holes. This allows slight adjustment of the speaker when
mounted.
Products Featuring FLEX FIT
RF LINK
Rockford’s proprietary RF Link is a bus-power component connection system enabling
integration and control of all RF Link equipped products. The use of this systems allows
for the expansion of auxiliary controls and managed system turn on.
Products Featuring RFLINK
YOUTUBE.COM/ROCKFORDFOSGATE
WATCH DETAILED VIDEOS ON OUR SPEAKER TECHNOLOGIES.
53 2013 BUYERS GUIDE
DISCREET DUAL CLAMP
Rockford’s proprietary tweeter mounting design provides concentric clamping
pressure around the perimeter of the mounting hole, utilizing a single center screw.
This applies balanced pressure to both faces of the mounting surface. From there, the
tweeter simply snaps into place and is finished with a snap on trim ring.
Products Featuring DDC
INDUCTIVE DAMPING HEAT SINK
Secures directly to the top of magnet structure to improve system efficiency by
reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to
reduce voice coil temperature.
Products Featuring IDHS
INTEGRATED CONCEALED CROSSOVER
The Integrated Concealed Crossover hides the crossover inside the basket, creating
a cleaner look and easier installation.
Products Featuring IC
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry
standards. This means your speaker has the capacity to handle power under
continuous demand, not instantaneous power handling that over time can damage
voice coils.
Products Compliant with CEA-2031
VERIFIED WITH KLIPPEL
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker
engineering personnel must be trained and certified by Klippel prior to using the three
separate Klippel systems to design, develop and test.
•
•
•
Klippel DA-2 (Designed)
Klippel PM-8 (Developed)
Klippel QC (Tested)
Products Verified with KLIPPEL
SPEAKER PERFORMANCELINEUP
Accuracy Score - Is derived from calculating the
magnitude deviations from the speaker’s frequency response against a reference flat magnitude.
response.
ACCURACY
SCORE
FREQ.
RESPONSE
RANGE
PEAK
POWER
=
Accuracy
Score
96
100
COMPONENTS
out of
100
Accuracy
Score
85
out of
100
Accuracy
Score
82
MID
HIGH
Peak Power - The maximum amount of amplifier
power that can be applied to a speaker prior to entering into an unsafe operating scenario.
FREQUENCY
RESPONSE RANGE
out of
Accuracy
Score
91
BASS
Frequency Response Range - The frequency response range or width tells you how high or low
the speaker plays.
out of
100
55 2013 BUYERS GUIDE
PEAK
POWER
FREQUENCY
RESPONSE RANGE
PEAK
POWER
FREQUENCY
RESPONSE RANGE
PEAK
POWER
FREQUENCY
RESPONSE RANGE
PEAK
POWER
COAXIALS
COMPONENTS
COAXIALS
COMPONENTS
COAXIALS
COMPONENTS
Accuracy
Score
80
out of
100
Accuracy
Score
79
out of
100
Accuracy
Score
78
100
out of
100
Accuracy
Score
72
out of
100
Accuracy
Score
75
PEAK
POWER
FREQUENCY
RESPONSE RANGE
PEAK
POWER
FREQUENCY
RESPONSE RANGE
out of
Accuracy
Score
73
FREQUENCY
RESPONSE RANGE
out of
100
PEAK
POWER
FREQUENCY
RESPONSE RANGE
PEAK
POWER
FREQUENCY
RESPONSE RANGE
PEAK
POWER
FREQUENCY
RESPONSE RANGE
PEAK
POWER
Modifications to the framework of a speaker significantly impact their sonic signature.
Combining various materials will strengthen, add volume and resonate the music to a
desired sound. By intertwining superior speaker designs with Rockford’s proprietary
acoustic technologies in our speaker lineup we are sure to bring your music to life.
SURROUND
CONE
TWEETER
BASKET
CROSSOVEr
MATERIAL HIEARCHY
MAGNET
BESt
GOOD
•
•
•
•
Tweeter - Composed of the same
parts as an speaker, surround,
cone, voice coil, basket and magnet. Just on a smaller scale.
Cone - A.K.A the diaphragm, this
is the voice of the speaker. Shape
and material dramatically change
tonality.
Crossover - Works like a switch board,
directing the audio signal through
caps, filters and switches to the appropriate speaker.
Basket - Also referred to as the frame
or chassis, this is the skeletal system
of the speaker. Here to keep everything in their place.
Surround - Works in harmony with
the spider, attached to the cone to
maintain the centering of the voice
coil in the magnetic gap.
Magnet - The heart of speaker,
creating the force to push and pull
cone assembly. Size, material, and
design may differ, depending on
performance goals.
TWEETER
Liquid Crystal Polymer Fiber
Aluminum Dome
Treated Fabric Dome
Plated Polyether Imide (PEI)
Dome
• Mylar Balanced Dome
CROSSOVER
• RFLink™ Equipped External
Component Crossover w/ 1%
Mil-Spec Parts
• External Component Crossover w/ 5% (Tol) Parts
• ICC™ Component Crossover
w/ 5% (Tol) Parts
• ICC™ Component Crossover
w/ 10% (Tol) Parts
• Integrated High-Pass Crossover
SURROUND
• Butyl rubber w/ VAST™
• Nitrile Butadiene Rubber w/
VAST™
• Nitrile Butadiene Rubber
• W-Style, Treated Cloth
• SPE Foam
1”(25mm) Liquid Crystal Polymer Fiber
Ring Radiator Dome, Dual Neodymium
Magnets w/ IDHS™, Low Resonant
Chamber and DDC™
RFLink™ Equipped External Component
Crossover w/ 1% Mil-Spec Parts and Inelligent Protection w/ Integrated/Remote
Tuning Module
Butyl Rubber w/ VAST™
Tri-laminate Liquid Crystal Polymer
Fiber w/ Machined
Copperphase Plug
Die-Cast Aluminum
w/ FlexFitTM
Multi-Pole™ Dual Neodymium Magnet w/
IDHS™
1”(25mm) Liquid Crystal Polymer Fiber
Dome w/ Neodymium
Magnet and DDC™
External Audiophile Grade Component
Crossover w/ 5% (Tol) Parts
Butyl Rubber w/ VAST™
Woven Liquid Crystal
Polymer Fiber
Die-Cast Aluminum
w/ FlexFitTM
Neodymium Magnet
w/ IDHS™
CONE
• Liquid Crystal Polymer Fiber
• Injection Molded Polypropylene-carbon Fiber Blend
• Injection Molded Mineral Filled
Polypropylene
• Vacuum Formed Polypropylene
• Fiber Reinforced Paper
BASKET
• Die-Cast Aluminum w/ FlexFitTM
• StampCastTM w/ FlexFitTM
• Stamped Steel
MAGNET
• Multi-pole™ Dual Neodymium Magnet w/ IDHS™
• Neodymium Magnet w/
IDHS™
• Single Ferrite Magnet
1”(25mm) Aluminum Dome w/ Neodymium Motor and DDC™
External Audiophile Grade Component
Crossover w/ 5% (Tol) Parts
Butyl Rubber w/ VAST™
Injection Molded Polypropylene-Carbon
Fiber Blend w/ Machined Aluminum
Phase Plug
StampCastTM w/ FlexFitTM
Single Ferrite Magnet
1”(25mm) Treated Fabric Dome w/
Neodymium Motor and DDC™
External Audiophile Grade Component
Crossover w/ 5% (Tol) Parts
Butyl Rubber w/ VAST™
Injection Molded Polypropylene-Carbon
Fiber Blend
StampCastTM w/ FlexFitTm
MATERIAL HIEARCHY
Single Ferrite Magnet
BESt
GOOD
•
•
•
•
TWEETER
Liquid Crystal Polymer Fiber
Aluminum Dome
Treated Fabric Dome
Plated Polyether Imide (PEI)
Dome
• Mylar Balanced Dome
CROSSOVER
• RFLink™ Equipped External
Component Crossover w/ 1%
Mil-Spec Parts
• External Component Crossover w/ 5% (Tol) Parts
• ICC™ Component Crossover
w/ 5% (Tol) Parts
• ICC™ Component Crossover
w/ 10% (Tol) Parts
• Integrated High-Pass Crossover
SURROUND
• Butyl rubber w/ VAST™
• Nitrile Butadiene Rubber w/
VAST™
• Nitrile Butadiene Rubber
• W-Style, Treated Cloth
• SPE Foam
1”(25mm) Plated Polyether Imide (PEI)
Dome w/ Neodymium Motor
and DDC™
ICC™ Component Crossover w/ 10%
(Tol) Parts
Nitrile Butadiene Rubber
w/ VAST™
Injection Molded Mineral Filled Polypropylene
StampCastTM w/ FlexFitTM
Single Ferrite Magnet
1”(25mm) Mylar Balanced
Dome
Integrated High-Pass Crossover
SPE Foam
Vacuum Formed Polypropylene
Stamped Steel
Single Ferrite Magnet
CONE
• Liquid Crystal Polymer Fiber
• Injection Molded Polypropylene-carbon Fiber Blend
• Injection Molded Mineral Filled
Polypropylene
• Vacuum Formed Polypropylene
• Fiber Reinforced Paper
BASKET
• Die-Cast Aluminum w/ FlexFitTM
• StampCastTM w/ FlexFitTM
• Stamped Steel
MAGNET
• Multi-pole™ Dual Neodymium Magnet w/ IDHS™
• Neodymium Magnet w/
IDHS™
• Single Ferrite Magnet
1”(25mm) Aluminum Dome w/ Neodymium Motor
ICC™ Component Crossover w/ 5% (Tol)
Parts
Butyl Rubber w/ VAST™
Injection Molded Polypropylene-Carbon
Fiber Blend
StampCastTM w/ FlexFitTM
Single Ferrite Magnet
1”(25mm) Plated Polyether Imide (PEI)
Dome w/ Neodymium
Motor and DDC™
ICC™ w/ 10% (Tol) Parts
Nitrile Butadiene Rubber
w/ VAST™
Injection Molded Mineral Filled Polypropylene
StampCastTM w/ FlexFitTM
MATERIAL HIEARCHY
Single Ferrite Magnet
BESt
GOOD
•
•
•
•
TWEETER
Liquid Crystal Polymer Fiber
Aluminum Dome
Treated Fabric Dome
Plated Polyether Imide (PEI)
Dome
• Mylar Balanced Dome
CROSSOVER
• RFLink™ Equipped External
Component Crossover w/ 1%
Mil-Spec Parts
• External Component Crossover w/ 5% (Tol) Parts
• ICC™ Component Crossover
w/ 5% (Tol) Parts
• ICC™ Component Crossover
w/ 10% (Tol) Parts
• Integrated High-Pass Crossover
SURROUND
• Butyl rubber w/ VAST™
• Nitrile Butadiene Rubber w/
VAST™
• Nitrile Butadiene Rubber
• W-Style, Treated Cloth
• SPE Foam
1/2”(13mm) Embedded Phase Coherent
Mylar Balanced Dome
Integrated High-Pass Crossover
Nitrile Butadiene Rubber
Vacuum Formed Polypropylene
Stamped Steel
Single Ferrite Magnet
1.5”(38mm) Horn Design
External Audiophile Grade Component
Crossover w/ 5% (Tol) Parts
W-Style, Treated Cloth
Fiber Reinforced Paper w/ Machined
Aluminum Phase Plug
StampCastTM w/ FlexFitTM
Single Ferrite Magnet
CONE
• Liquid Crystal Polymer Fiber
• Injection Molded Polypropylene-carbon Fiber Blend
• Injection Molded Mineral Filled
Polypropylene
• Vacuum Formed Polypropylene
• Fiber Reinforced Paper
BASKET
• Die-Cast Aluminum w/ FlexFitTM
• StampCastTM w/ FlexFitTM
• Stamped Steel
MAGNET
• Multi-pole™ Dual Neodymium Magnet w/ IDHS™
• Neodymium Magnet w/
IDHS™
• Single Ferrite Magnet
Frequency
Response
Sensitivity
(1W/1M)
Sensitivity
(2.83V/1M)
45Hz-40kHz
88.5dB
91.5dB
T3652-S
6.5”
1”
125 watts
250 watts
48Hz-24kHz
87dB
90dB
2.48”
T252-S
5.25”
1”
75 watts
150 watts
65Hz-22kHz
87dB
90dB
1.97”
T2652-S
6.5”
1”
100 watts
200 watts
50Hz-22kHz
88dB
91dB
2.48”
T2T-S
N/A
1”
100 watts
200 watts
3kHz-22kHz
90dB
93dB
*0.91”
T152-S
5.25”
1”
75 watts
150 watts
65Hz-22kHz
87dB
90dB
1.99”
2.48”
Butyl rubber with
VAST™
Tri-laminate Liquid Crystal
Polymer Fiber w/ machined copper phase plug
Nomex™ w/ balanced
stitched woven embedded
fiber/flat lead wires
Die-cast aluminum with
FlexFit™
Butyl rubber with
VAST™
Woven Liquid Crystal
Polymer Fiber™
Nomex™ w/ balanced
stitched woven embedded
fiber/flat lead wires
Die-cast aluminum with
FlexFit™
Butyl rubber with
VAST™
Injection molded
Polypropylene-carbon
fiber blend w/ machined
aluminum phase plug
Fatigue resistant poly-cotton
linear spider w/ woven fiber
reinforced lead wire
StampCast™ with Flex-fit™
Fatigue resistant poly-cotton
linear spider w/ woven fiber
reinforced lead wire
StampCast™ with Flex-fit™
T16-S
6.0”
1”
80 watts
160 watts
60Hz-22kHz
86dB
89dB
1.93”
T165-S
6.5”
1”
80 watts
160 watts
60Hz-22kHz
86dB
89dB
1.93”
T1675-S
6.75”
1”
100 watts
200 watts
55Hz-22kHz
89dB
92dB
2.51”
T1T-S
N/A
1”
100 watts
200 watts
3kHz-22kHz
90dB
93dB
*0.91”
T142
4”
0.75”
40 watts
80 watts
85Hz-22kHz
86dB
89dB
1.79”
T152
5.25”
1”
60 watts
120 watts
65Hz-22kHz
86.5dB
89.5dB
1.99”
T16
6.0”
1”
70 watts
140 watts
65Hz-22kHz
88dB
91dB
1.93”
T165
6.5”
1”
70 watts
140 watts
65Hz-22kHz
88dB
91dB
1.93”
T1675
6.75”
1”
75 watts
150 watts
50Hz-22kHz
89dB
92dB
2.51”
T1462
4”x6”
0.75”
45 watts
90 watts
75Hz-22kHz
85.5dB
88.5dB
2.00”
T1572
5”x7”
1”
70 watts
140 watts
60Hz-22kHz
87dB
90dB
2.35”
T1682
6”x8”
1”
80 watts
160 watts
55Hz-22kHz
88dB
91dB
2.60”
T1692
6”x9”
1”
100 watts
200 watts
50Hz-22kHz
90dB
93dB
3.39”
T1693
6”x9”
1”
100 watts
200 watts
50Hz-22kHz
91dB
94dB
3.39”
P152-S
5.25”
1”
50 watts
100 watts
70Hz-22kHz
87dB
90dB
1.91”
P16-S
6.0”
1”
60 watts
120 watts
60Hz-22kHz
87.2dB
90.2dB
1.93”
P165-S
6.5”
1”
60 watts
120 watts
60Hz-22kHz
87.2dB
90.2dB
1.93”
P1675-S
6.75”
1”
60 watts
120 watts
55Hz-22kHz
89dB
92dB
2.24”
P1T-S
N/A
1”
60 watts
120 watts
3.5kHz-22kHz
90dB
93dB
*0.91”
P132
3.5”
0.5”
20 watts
40 watts
120Hz-22kHz
85dB
88dB
1.46”
P142
4”
0.75”
30 watts
60 watts
100Hz-22kHz
86.5dB
89.5dB
1.75”
P152
5.25”
0.75”
40 watts
80 watts
70Hz-22kHz
87dB
90dB
1.91”
P16
6.0”
0.75”
55 watts
110 watts
65Hz-22kHz
88dB
91dB
1.93”
P165
6.5”
0.75”
55 watts
110 watts
65Hz-24kHz
88dB
91dB
1.93”
P1675
6.75”
0.75”
60 watts
120 watts
60Hz-24kHz
89dB
92dB
2.24”
P1462
4”x6”
0.75”
35 watts
70 watts
90Hz-22kHz
87.5dB
90.5dB
1.89”
P1572
5”x7”
0.75”
60 watts
120 watts
75Hz-22kHz
89dB
92dB
2.30”
P1683
6”x8”
0.75”
65 watts
130 watts
65Hz-24kHz
90dB
93dB
2.32”
P1692
6”x9”
0.75”
75 watts
150 watts
60Hz-22kHz
91dB
94dB
3.07”
P1694
6”x9”
0.75”
75 watts
150 watts
60Hz-24kHz
91dB
94dB
3.07”
PPS4-6
6.5”
N/A
100 watts
200 watts
85Hz-5kHz
92.5dB
95.5dB
2.24”
PPS8-6
6.5”
N/A
100 watts
200 watts
87Hz-5kHz
91.5dB
94.5dB
2.24”
PPS4-8
8.0”
N/A
125 watts
250 watts
80Hz-5kHz
94.5dB
97.5dB
2.91”
PPS8-8
8.0”
N/A
125 watts
250 watts
82Hz-5kHz
93dB
96dB
2.91”
63 2013 BUYERS GUIDE
Frame
Structure
Spider
Peak Power
Handling
(watts)
300 watts
Cone
Material
RMS Power
Handling
(watts)
150 watts
Surround
Material
Tweeter Size
1”
Mounting
Depth
Speaker Size
SPEAKER SPECIFICATIONS
6.5”
T5652-S
Aluminum dome w/
integral suspension &
tuned chamber
Butyl rubber with
VAST™
Injection molded
Polypropylene-carbon
fiber blend
Treated fabric dome w/
integral suspension &
tuned chamber
Butyl rubber with
VAST™
Injection molded
Polypropylene-carbon
fiber blend
Fatigue resistant poly-cotton
linear spider w/ woven fiber
reinforced lead wire
StampCast™ with Flex-fit™
Nitrile Butadiene
Rubber with
VAST™
Injection molded mineral
filled Polypropylene
Fatigue resistant poly-cotton
linear spider w/ woven fiber
reinforced lead wire
StampCast™ with Flex-fit™
Plated Polyether Imide
(PEI) dome
Nitrile Butadiene
Rubber with
VAST™
Injection molded mineral
filled Polypropylene
Fatigue resistant poly-cotton
linear spider w/ woven fiber
reinforced lead wire
StampCast™ with Flex-fit™
W-Style, Treated
Cloth
Fiber reinforced paper
w/ machined aluminum
phase plug
Fatigue resistant polycotton
linear spider w/ woven
lead wire
StampCast™ with Flex-fit™
Terminal
Connectors
Accessories
Cat 5 remote extension cable,
grilles and mounting hardware
Neodymium magnet w/
IDHS™
1"(25mm) Liquid Crystal Polymer Fiber™
dome w/ neodymium magnet and DDC™
External audiophile grade component crossover w/ 5%
(Tol) parts
3-way connection terminal
Grilles and mounting hardware
1”(25mm) aluminum dome w/ neodymium
motor and DDC™
External audiophile grade component crossover w/ 5%
(Tol) parts
Unified tab
Multi-OEM™ adaptor plates, grilles
and mounting hardware
18 Ga. Pigtail
Flush w/ DDC™, surface and angle
mounting hardware
External audiophile grade component crossover w/ 5%
(Tol) parts
Unified tab
Multi-OEM™ adaptor plates, grilles
and mounting hardware
External audiophile grade component crossover w/ 5%
(Tol) parts
18 Ga. Pigtail
Flush w/ DDC™, surface and angle
mounting hardware
Ferrite magnet structure
Removable Semi-flexible
Polyvinyl Chloride
Crossover
3-way connection terminal
Tweeter
Single chassis stereo w/ audiophile 1% mil-spec components and dual micro-controller for intelligent protection w/
integrated/remote tuning module and RFLink™ equipped
Motor
Cover
1"(25mm) Liquid Crystal Polymer Fiber
ring radiator dome, dual neodymium
magnets w/ IDHS™, low resonant chamber
and DDC™
Motor
Structure
Multi-pole™ dual neodymium
magnet w/ IDHS™
Neodymium
Ferrite magnet structure
Removable Semi-flexible
Polyvinyl Chloride
1”(25mm) treated fabric dome w/
neodymium motor and DDC™
Neodymium
Ferrite magnet structure
Removable Semi-flexible
Polyvinyl Chloride
1”(25mm) aluminum dome w/ neodymium
motor and DDC™
ICC™ component crossover with 5% (Tol) parts
Unified tab
Multi-OEM™ adaptor plates, grilles
and mounting hardware
Ferrite magnet structure
Removable Semi-flexible
Polyvinyl Chloride
1”(25mm) plated Polyether Imide (PEI)
dome w/ neodymium motor and DDC™
ICC™ component crossover with 10% (Tol) parts
Unified tab
Multi-OEM™ adaptor plates, grilles
and mounting hardware
External component crossover w/ 10% (Tol) parts
18 Ga. Pigtail
Flush w/ DDC™, surface and angle
mounting hardware
Neodymium
Ferrite magnet structure
Removable Semi-flexible
Polyvinyl Chloride
3/4”(20mm) pole mounted plated Polyether Imide (PEI) dome w/ neodymium
motor
ICC™ with 10% (Tol) parts
Unified tab
Multi-OEM™ adaptor plates, grilles
and mounting hardware
Ferrite magnet structure
Removable Semi-flexible PVC
N/A
ICC™ with 10% (Tol) parts
12 Ga. compression style
Grilles and mounting hardware
*Flush Mount
Frequency
Response
Sensitivity
(1W/1M)
Sensitivity
(2.83V/1M)
700watts
40Hz-3kHz
95dB
98dB
PPS8-10
10.0”
N/A
350 watts
700watts
40Hz-3kHz
95dB
98dB
4.17”
PP4-T
N/A
1.5”
50 watts
100 watts
3kHz-20kHz
103dB
106dB
2.59”
PP8-T
N/A
1.5”
50 watts
100 watts
3kHz-20kHz
103dB
106dB
2.59”
R152-S
5.25”
1”
40 watts
80 watts
58Hz-20kHz
85dB
88dB
1.91”
R16-S
6.0”
1”
40 watts
80 watts
60Hz-20kHz
89dB
92dB
1.97”
R165-S
6.5”
1”
40 watts
80 watts
60Hz-20kHz
89dB
92dB
1.97”
R1675-S
6.75”
1”
40 watts
80 watts
55Hz-20kHz
89dB
92dB
2.00”
R1T-S
N/A
1”
40 watts
80 watts
2.5kHz-22kHz
72.5dB
75.5dB
*0.76”
R14X2
4”
0.5”
30 watts
60 watts
100Hz-20kHz
85dB
88dB
1.72”
R1525X2
5.25”
0.5”
40 watts
80 watts
62Hz-20kHz
88dB
91dB
1.93”
4.17”
W-Style, Treated
Cloth
Fiber reinforced paper
w/ machined aluminum
phase plug
Fatigue resistant polycotton
linear spider w/ woven
lead wire
StampCast™ with Flex-fit™
N/A
N/A
N/A
Die-cast aluminum with
FlexFit™
SPE Foam
Vacuum formed PP
Fatigue resistant spider
Stamped steel
Fatigue resistant spider
Stamped steel
R165X3
6.5”
0.5”
45 watts
90 watts
52Hz-20kHz
91dB
94dB
2.15”
R1675X2
6.75”
0.5”
45 watts
90 watts
52Hz-20kHz
91dB
94dB
2.19”
R168X2
6”x8”
0.5”
55 watts
110 watts
51Hz-20kHz
87dB
91dB
2.54”
R169X2
6”x9”
0.5”
65 watts
130 watts
48Hz-20kHz
90dB
93dB
2.85”
R169X3
6”x9”
0.5”
65 watts
130 watts
47Hz-20kHz
90dB
93dB
2.85”
65 2013 BUYERS GUIDE
Frame
Structure
Spider
Peak Power
Handling
(watts)
350 watts
Cone
Material
RMS Power
Handling
(watts)
N/A
Surround
Material
Tweeter Size
10.0”
Mounting
Depth
Speaker Size
PPS4-10
Mylar balanced dome
Nitrile Butadiene
Rubber
Vacuum formed Polypropylene
Motor
Structure
Motor
Cover
Tweeter
Crossover
Terminal
Connectors
Accessories
Ferrite magnet structure
Removable Semi-flexible PVC
N/A
ICC™ with 10% (Tol) parts
12 Ga. compression style
Grilles and mounting hardware
Ferrite magnet structure
N/A
1.5”(38mm) horn design
ICC™ with 10% (Tol) parts
12 Ga. compression style
Mounting hardware
Ferrite magnet structure
N/A
1”(25mm) mylar balanced dome
Integrated high-pass crossover
Standard spade connector
Grilles and mounting hardware
18 Ga. Pigtail
Flush, surface and angle mounting
hardware
Standard spade connector
Grilles and mounting hardware
Ferrite magnet structure
N/A
1/2”(13mm) Embedded Phase Coherent
mylar balanced dome
Integrated high-pass crossover
1/2”(13mm) pole mounted mylar balanced
dome
*Flush Mount
ROCKFORDFOSGATE.COM
Don’t forget to use our Woofer Wiring Wizard to properly
wire woofers to your amplifier or our Woofer Box Advisor for
optimized enclosure bass performance.
MARINE
AMPLIFIERS
BRING YOUR SYSTEM TO LIFE & CRANK IT
SUBWOOFERS
MAKE WAVES WITH HUGE BASS, ANY PLACE
SPEAKERS
ROCKING THE LATEST SINGLE NOT MOTOR DRONE
SOURCE UNITS
MP3, CD, OR MOBILE DEVICE...PLUG-IN & GO
AMPLIFIERS
750WATTS
1200WATTS
69 2013 BUYERS GUIDE
SUBWOOFERS
400WATTS
600WATTS
SINGLE 4Ω
OPTIONAL COLOR
SUBS | SPEAKERS | WAKE TOWER
ENCLOSURE
SPEAKERS
2WAY
6.5 Inch
8.0 Inch
RFX5000
SOURCE UNITS
RFX9700CD
RFX9900DM
®
®
RFXMR5BB
RFXMR7
RFXMR8
RFXMR6
REMOTES
RFX30
RFX33SD
RFXBT
ACCESSORIES
PROPRIETARY
ROCKFORD TECHNOLOGY
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has
lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and
make it Rockford.
M2 MARINE GRADE
Rockford’s M2 marine grade standard takes into account
the devastating effects of the outdoor environment and
takes extreme measures to ensure optimum performance.
MARINE GRADE
• 100% UV stable CENTREX® injection molded plastic
• Corrosion resistant gold plated polarized terminals
• Injection molded polypropylene cone with UV inhibitors
• Internal full magnetic shielding
• Stainless steel grilles and mounting hardware
• UV and salt fog resistant thermo-plastic elastomer
surround
ASTM B117 – SALT/FOG &
D4329 – UV TEST STANDARDS
ASTM B117 salt/fog test standard provides accelerated
aging in a controlled corrosive environment to produce
relative corrosion resistance information for specimens
of metals and coated metals.
ASTM D4329 test standard is intended to induce
property changes associated with end-use conditions,
including the effects of sunlight, moisture, and heat.
CEA-2031
Power handling on Rockford Fosgate speakers
conform to CEA-2031 industry standards. This means
your speaker has the capacity to handle power under
continuous demand, not instantaneous power handling
that over time can damage voice coils.
CEA-2006
Power ratings on Rockford Fosgate amplifiers conform
to CEA-2006 industry standards. These guidelines
mean your amplifier’s output power ratings are REAL
POWER numbers, not inflated marketing ratings.
73 2013 BUYERS GUIDE
VERTICAL ATTACH SURROUND TECHNIQUE
U.S. Patent (Patent Pending)
Rockford’s proprietary surround technique,VAST,
provides up to a 25% increase in the speakers
effective radiating cone area without complicated
installation issues. This design alters the typical design
and manufacturing technique by eliminating the large
flat glue surface area (the landing) which allows the
surround to be shifted for increased cone area. In
turn, both nominal efficiency and maximum output
capabilities are dramatically improved.
FLEX FIT
The slot mounted frame pattern of the Flex Fit basket
utilizes slots (where feasible) instead of single screw
sized holes. This allows slight adjustment of the
speaker when mounted.
INTEGRATED CONCEALED CROSSOVER
The Integrated Concealed Crossover hides the
crossover inside the basket, creating a cleaner look
and easier installation.
YOUTUBE.COM/ROCKFORDFOSGATE
WATCH DETAILED VIDEOS ON OUR MARINE PRODUCTS.
Dimensions
Topology
Circuit Board
Variable
Crossover
12 dB/oct - variable
Low Pass
>50dB
H 2.0” x W 6.8” x L 11.1”
M750-1D
250x1 @ 4 ohms
500x1 @ 2 ohms
750x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.0” x W 6.8” x L 9.1”
M1200-1D
400x1 @ 4 ohms
800x1 @ 2 ohms
1200x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.0” x W 6.8” x L 11.1”
1.25 cu ft. Port: (1) 4”x8.52”
*Infinite Baffle compatible
Tall profile, Santoprene™
with VAST™
Injection molded
Polypropylene
M212S4/M212S4B
12”
Single 4 Ω
12
87 dB
300
600
11.25"
6.58"
0.258
1.00”
1.50 cu ft. Port: (1) 3”x5.7 4”
*Infinite Baffle compatible
M262/M262B
6.5”
1”
75 watts
150 watts
53Hz-22kHz
88dB
91dB
2.80”
M282/M282B
8”
1”
100 watts
200 watts
48Hz-22kHz
90dB
93dB
3.42”
Ultraviolet &
salt-fog resistant
Thermo-Plastic
Elastomer
Injection molded,
parabolic shape mineral
filled Polypropylene w/ UV
inhibitors
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
M262-WAKE/M262B-WAKE
(1pair) M262 or M262B
4Ω
75 Watts
150 Watts
10.96" x 7.03" x 11.26"
M282-WAKE/M282B-WAKE
(1pair) M282 or M282B
4Ω
100 Watts
200 Watts
13.25" x 9.06" x 13.09"
75 2013 BUYERS GUIDE
Frame
Structure
0.75”
Spider
0.154
Cone
Material
5.54"
Surround
Material
9.13"
Mounting
Depth
500
Sensitivity
(2.83V/1M)
250
Sensitivity
(1W/1M)
86 dB
Frequency
Response
10
Peak Power
Handling
(watts)
Single 4 Ω
RMS Power
Handling
(watts)
10”
Tweeter Size
M210S4/M210S4B
Speaker Size
Dustcap
Material
>90dB
*Surround
Material
150mV - 5V
Ported
Enclosure
<0.1%
Sealed Enclosure (cu. ft.)
20Hz - 20kHz
Speaker
Displacement
(cu. ft.)
100x4 @ 4 ohms
150x4 @ 2 ohms
300x2 @ 4 ohms bridged
Mounting
Depth
M600-4D
Mounting
Diameter
>50dB
Peak Power
Handling
(watts)
>90dB
RMS Power
Handling
(watts)
150mV - 5V
Sensitivity
<0.1%
Xmax (mm)
20Hz - 20kHz
Nominal
Impedance
Channel
Separation
Conformal coated 4
layer 2 oz. copper
circuit board
S/N Ratio
Class d
Input Sensitivity
12 dB/oct - variable
High or Low Pass and
All Pass
THD+N @
Rated Power
Conformal coated 4
layer 2 oz. copper
circuit board
Frequency
Response
Full Range Class d
75x4 @ 4 ohms
100x4 @ 2 ohms
200x2 @ 4 ohms bridged
Speaker Size
Rated Power
H 2.0” x W 6.8” x L 9.1”
M400-4D
Moisture, tear and fatigue
resistant aramid fiber spider
Injection molded 100% UV
stable Centrex® w/ Flex-fit™
Additional
Features
1 ohm mono rated
• Short Circuit
• Thermal
LED Power and Protection
indicators
Focused mass die-cast heatsink
RCA input and RCA pass thru
4 Ga. set-screw
connector
10 Ga. set-screw
connector
Punch EQ variable from 0dB to
+18dB @ 45Hz with optional
PEQ level control and infrasonic
filter
Tweeter
Injection molded 100%
Ultraviolet stable Centrex®
1”(25mm) bridge mounted coated
aluminum alloy dome tweeter
Description
Shielded ferrite magnet structure
with extended vented pole and
bumped backplate.
Sealed Centrex™ motor
cover
Proprietary gold
plated compression
terminal. 8 Ga.
Water draining Centrex™
trim ring with integrated
stainless steel grille
ICC™ component crossover with 10% (Tol) parts
Features
Accessories
Motor
Cover
Ferrite magnet structure
Centrex™
Terminal
Connectors
Tear & fatigue resistant Nomex™ blend
spider with multipoint stitched lead wire
technique.
Crossover
2" 4-layer high temp. aluminum
voice coil with spun-laced Nomex™
insulating reinforcement collar
Motor
Structure
Injection molded
Polypropylene
Trim Ring
Speaker
Terminals
Punch EQ variable from 0dB to
+18dB @ 45Hz
Terminal
Connectors
Power
Terminals
10 Ga. set-screw
connector
Motor Cover
RCA Inputs
4 Ga. set-screw
connector
Motor
Structure
Heatsink
Design
RCA input and RCA pass thru
Frame
Structure
Status
Indicators
Focused mass die-cast heatsink
Spider
Protection
LED Power and Protection
indicators
Voice Coil
Impedance
Stability
• Short Circuit
• Thermal
Cone
Material
2 ohm stereo / 4 ohm mono
rated
Corrosion resistant gold plated
polarized input terminals w/ a
spare terminal set for optional
additional tweeters
Removable Centrex® trim ring
w/ 18 gauge corrosion resistant
integrated/removable stainless steel
grille and mounting hardware
Dimensions
Flip down AM/FM Stereo CD Player 40 watts x 4
AM/FM Tuner, Disc Player, MP3, SiriusXM Ready, Made
for iPod, USB Input, SD card
DIN size chassis with 1.5 DIN face
Digital Media Receiver 40 watts x 4
AM/FM Tuner, MP3, SiriusXM Ready, Made for iPod,
USB Input, BLUETOOTH
DIN size chassis with 1.8 DIN face
RFX3000
Hide-away box w/ AM/FM Stereo for RFXMR5BB 50
watts x 4
AM/FM Tuner, SiriusXM Ready, iPod Support, USB
Input, AUX Input, Video In/Out, Dual Zone, Disc
Changer Ready
H 2.50” x W 6.875” x L 8.375”
RFX5000
Hide-away box w/ AM/FM Stereo for RFXMR5BB 50
watts x 4
AM/FM Tuner, SiriusXM Ready, iPod Support, USB Input, AUX Input, Video In/Out, Dual Zone, Disc Changer
Ready, BLUETOOTH ready
H 2.50” x W 6.875” x L 8.375”
Waterproof wired remote w/ digital display for
RFX3000 & RFX5000
3-Line LCD Display, Full Function Control
H 3.90” x W 6.70” x D 0.70”
RFXMR6
Waterproof wired remote for RFX3000, RFX5000
RFX9700CD & RFX9900DM
Full Function Control
Overall Diameter 2.5” (64mm)
(Mounting Diameter 2.2” (55mm), Depth .5” (12.5mm))
RFXMR7
Waterproof wired remote w/ digital display for
RFX3000,RFX5000, RFX9700CD & RFX9900DM
Capactive Touch LCD Display, Full
Function Control
Overall Diameter 3.5” (90mm)
(Mounting Diameter 3” (76mm), Depth 1.1” (29mm))
RFXMR8
Waterproof wired remote w/ digital display for
RFX3000,RFX5000, RFX9700CD & RFX9900DM
Full Function Control w/ LCD Display
Overall Diameter 3.5” (90mm)
(Mounting Diameter 3” (76mm), Depth 1.1” (29mm))
RFX9700CD
RFX9900DM
RFXMR5BB
RFX10
RFX16
IPODEC
RFX30
RFX33SD
RFXBT
10 foot 5-Pin Mini DIN extension cable for RFXMR5BB
10 FT
16 foot 8-Pin DIN extension cable for RFXMR6,
RFXMR7, RFXMR8
16 FT
9-Pin mini DIN to 30-Pin Apple connector for use with
RFX30 & RFX33SD
6 FT
USB and 3.5mm input socket for use with RFX3000
& RFX5000
Overall Diameter 2” (49mm) w/ 6 FT cable
(Mounting Diameter 1.5” (37mm), Depth 1.1” (28mm))
USB, 3.5mm, SD card, iPod input socket for use with
RFX5000 & RFX9900DM
Overall Diameter 2” (49mm) w/ 6 FT cable
(Mounting Diameter 1.5” (37mm), Depth 1.1” (28mm))
Bluetooth dongle for use with RFX5000
Receiver: 1.08” (27mm) x 2.06” (52mm) x 0.5” (13mm)
Cable: 9.33” (237mm)
VEHICLE INTEGRAT
TION
DIGITAL PROCESSORS
ULTIMATE SIGNAL MANAGEMENT
SIGNAL CONVERTERS
HIGH TO LOW...GOOD TO GO
POWERED LOADED
THE QUICK AND EASY SOLUTION FOR BASS
ACCESSORIES
THE LIFE LINE TO ANY SYSTEM
DIGITAL PROCESSORS
PROPRIETARY 3SIXTY TECHNOLOGY
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone.
Our constant desire to push the performance envelope has lead us to develop proprietary
amplifier topologies and acoustic/electrical technologies that put a spin on the normal and
make it Rockford.
®
BLUETOOTH®
A2DP wireless audio streaming via the included dongle allows you to listen to audio from any BLUETOOTH
enabled device.
RF LINK
Rockford’s proprietary RF Link is a bus-power component connection system enabling integration and control of
all RF Link equipped products. The use of this system allows for the expansion of auxiliary controls and managed
system turn on.
FREQUENCY NORMALIZATION OF AUDIO
SIGNALS
U.S. Patent (7,778,718,B2)
Frequency normalization is achieved by characterizing the frequency response of the audio source based on a
reference input signal. This reference input signal is used to establish a reference frequency response, which is
stored in memory and used to select equalizer settings. The system restores missing spectral content by summing
multiple input signals from the audio source. The system then normalizes the frequency response based on
characterizations of the signal by utilizing equalizer settings from memory.
3SIXTY GRAPHIC USER INTERFACE (GUI)
3Sixty interactive graphic user interface allows for
control of the crossover type, slope, high/low pass filter,
the 248 band parametric eq, phase, and time delay.
79 2013 BUYERS GUIDE
INPUT CHANNEL CONFIGURATOR
OUTPUT CHANNEL CONFIGURATOR
CHANNEL SUMMING
CONFIGURATOR
ADJUSTING INPUT GAIN
3 S I X T Y. 3 S I G N A L P R O C E S S O R
The new 3sixty.3 interactive
signal processor is the
perfect solution for those
customers who want to
add aftermarket equipment
to their factory source
unit, integrate their mobile
devices, or have complete
control over their audio
signal. With features like
Bluetooth streaming,
selectable crossover types
and a USB interface, the
versatility is endless.
3SIXTY.3
3SIXTY.3
Input/Output
AUX Inputs
Input Voltage
Output Voltage
8 Speaker/RCA
Balanced/Unbalanced
Stereo/Digital
(SPDIF)
2V-24V
8V RMS
Unbalanced/Balanced
Auto
Turn-On
6V DC Offset
Remote
Dimensions
Master or
Sub Level/
PEQ/ EQ
Presets/
Input
H 1.75” x W 5.125” x L 9.25”
D A 2 D I G I TA L & A N A L O G P R E - A M P
The DA2 provides a connection between
the MOST system in the vehicle with any
aftermarket digital or analog amplifier.
Providing 8 channels of RCA analog
outputs, a digital Toslink output, and
an amplifier turn on/off control. With
full retention of the factory controls
(volume, balance, fader, and equalizer).
M1000-M-DA2
Visit for Vehicle Compatibility http://www.mobridge.us/compatibility/vehicles
3SIXTY
SIGNALCONVERTERS
SIGNAL PROCESSORS
/ POWERED LOADED
BALANCED LINE DRIVER
Rockford’s 2 channel Balanced Line Driver
improves the performance of any aftermarket
or factory radio. Designed to eliminates
system noise and compatible with high level
(speaker) inputs or low level (RCA) inputs.
RF-BLD
HIGH TO LOW CONVERT
What happens when your radio isn’t equipped
with RCA inputs? Rockford offers high
(speaker) to low (RCA) level converters in 2 or 4
channel versions.
RF-HLC4
RCA TO SPEAKER WIRE ADAPTER
Bought an amplifier without high level inputs
or looking to adapt speaker wire to an RCA
connectors...these adapters allow you to
quickly connect speaker wire to female or male
RCA ends.
RFIF2SW
Input/Output
AUX Inputs
Input Voltage Output Voltage
Auto
Turn-On
Remote
Dimensions
2 Speaker/RCA
Balanced/Unbalanced
N/A
650mV-10.5V
11V RMS Unbalanced
22V RMS Balanced
6V DC Offset
N/A
H 1.32” x W 5.90” x L 4.09”
RF-HLC4
4 Speaker/4 RCA
N/A
Up to 10.5V
Up to 3v
N/A
N/A
H 1” x W 3” x L 3.5”
RF-HLC
2 Speaker/2 RCA
N/A
Up to 10.5V
Up to 3v
N/A
N/A
H 1” x W 1.56” x L 3.5”
RFI2SW
2 Speaker/2 RCA
(MALE)
N/A
N/A
N/A
N/A
N/A
N/A”
RFIF2SW
2 Speaker/2 RCA
(FEMALE)
N/A
N/A
N/A
N/A
N/A
N/A
RF-BLD
81 2013 BUYERS GUIDE
PUNCH POWERED
LOADED
Punch Powered Loaded
enclosures are the quick and
easy to install bass solution
to upgrade your factory or
aftermarket stereo system.
With removable power
and signal connectors
quick connection and
disconnection of the
Punch bass solution
can be made.
P300-12
AVAILABLE in 10”or 12”
Powered Loaded Solutions
Three different
automatic turn
on modes;
REM (+12V),
DC Offset, and
Audio Signal.
Integrated grille included.
Speaker
Size
P300-10
P300-12
Rated Power
Signal Input
10”
300 watts RMS/
600 watts PEAK
Low-Level (RCA) or
High-Level (Speaker)
12”
300 watts RMS/
600 watts PEAK
Low-Level (RCA) or
High-Level (Speaker)
Auto
Turn-On
Remote
Dimensions
12v REM, 6V DC
Offset, Audio Signal
Included Punch Level
Control (PLC)
H 13.3” x W 18.38” x L 9.37”
12v REM, 6V DC
Offset, Audio Signal
Included Punch Level
Control (PLC)
H 14.96” x W 20.35” x L 11.5”
RF ACCESSORIES
EXCEEDING THE STANDARD
The American Wire Gauge standard was developed to rationalize selecting wire for a particular
purpose. In an electronic environment wire size can have a significant impact on performance.
Rockford Fosgate products are designed and engineered to perform at a superior level. It is
only fitting that the accessories linking them together perform with the same expectation.
THE AMERICAN WIRE
GAUGE STANDARD
The American Wire Gauge standard specifies the
exact amount of copper needed to indicate a
specific wire diameter or gauge. Rockford Fosgate
accessories are all designed and engineered in
accordance with the AWG specification.
ANATOMY OF WIRE
The construction of wire is broken out into three
elements, strands, clusters and bundles. Varying
these combinations will directly change the wire
gauge and significantly effect the flexibility of the
wire.
WIRE SIZE IMPACTS SYSTEM
PERFORMANCE
The smaller the wire gauge (copper content) the
greater the resistance which results in a loss in
power to your amplifier(s) and speaker(s), thus
creating a poor performing audio system!
ROCKFORDFOSGATE.COM
Don’t forget to use our Amp Wire Calculator to optimize
output with properly sized wire.
4 AWG
8 AWG
RFK1D
RFK4I
RFK8I
RFK1D - Dual Amp Kit
RFK1 - Power Only Kit
RFK4D - Dual Amp Kit
RFK4X - Complete Kit
RFK4i - Power w/ Interconnect Kit
RFK4 - Power Only Kit
RFK8X - Complete Kit
RFK8i - Power w/Interconnect Kit
RFK8 - Power Only Kit
Dual Twisted Pair
Twisted Pair
Coupler
RFK10I
• Couplers
Battery Clamps
Fuses
Terminals
RFDB1
INTERCONNECTS
• Available 3ft - 20ft
Length
• Y-Adapters
Battery Post Adapters
Fuse Holders
RFFU30
RFT1
RFDGM
RFFANL
RFDB1 - 1/0 AWG +/- Battery Clamp
• ANL Style 500-100A
• MAXI Style 100-50A
• AGU Style 60-30A
• Set Screw - 1/0 AWG &
4 AWG
• Crimp - 1/0 AWG, 4AWG
& 8 AWG
• Barrier Spades - 4 AWG &
8 AWG
RFDGM - GM Battery
Post Adapter
RFDGML - GM Battery
Post Adapter for Double
Stacked Terminals
1/0 AWG
4 AWG
8 AWG
Speaker Wire
RFFANL - Inline ANL or MAXI
Fuse Holder
RFFAGU - Inline AGU Fuse
Holder
RFFMAXI - Inline MAXI Fuse
Holder
RFFDAGU - Fused AGU
Distribution Block
RFD1 - 1/0 AWG Distribution
Block
RFD4 - 4 AWG Distribution
Block
RFW4R
RFW1R-51
RFW4B
• Red or Black
• 51ft Spool
• Red or Black
• 100ft Spool
Hybrid
RFC10HB
RFWP12
• 12 AWG, 16 AWG,
18 AWG
• 250/1000 ft Spool or
Packaged
• Red or Black
• 250ft Spool
Electrolytic
RFC10HB - 10 Farad Hybrid Digital
Capacitor
RFC2D - 2 Farad Hybrid Digital
Capacitor
RFW8B
Deadskin
RFC1
RFC1D - 1 Farad Digital Capacitor
RFC1 - 1 Farad Capacitor
DISTRIBUTION
RFIS
• Available 3ft - 20ft Length
• Y-Adapters
POWER WIRE
RFI-20
RFK10i - Power w/
Interconnect Kit
RFK10 - Power Only Kit
RFDS
RFDS - Sound Damping
Material 20’ square feet
FOR ADDITIONAL INFORMATION ON ACCESSORIES, PLEASE VISIT ROCKFORDFOSGATE.COM
CAPACITORS / DEADSKIN
RFIT-20
10 AWG
POWER KITS
1/0 AWG
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising