owner`s manual

OWNER’S MANUAL
HRX217VYA
HRX217HYA
HRX217VYA
LAWN MOWER
Before operating the mower for the first time, please read this
Owner’s Manual. Even if you have operated other mowers,
take time to become familiar with how this mower works and
practice in a safe area until you build up your skills.
Click to Save As
QUICK FIND
Air Filter
Add Fuel
Blade Control System
Blade Inspection
12
7
8
11
Check the Oil Level
Cleaning
Dealer Locator Information
How to Contact Honda
6
14
19
19
Maintenance Schedule
Oil Change
Serial Number Locations
Spark Plug
10
12
16
13
CONTENTS
FOR YOUR SAFETY
PARTS AND CONTROLS
INITIAL MOWER SETUP
Adjust the Handlebar
Add Engine Oil
Assemble the Grass Bag
BEFORE EACH OPERATION
Check Your Mower
Check Your Mowing Area
Clip Director®
Cutting Height Adjustment
Check the Oil Level
Add Fuel
OPERATION
Safe Mowing Practices
Operating the Controls
Blade Control System
Starting the Engine
Stopping the Engine
2
3
3
3
4
4
4
4
4
5
6
6
7
7
7
8
8
9
9
SERVICING YOUR MOWER
Maintenance Safety
Maintenance Schedule
Blade Inspection
Blade Mounting Bolt Inspection
Blade Replacement
Oil Change
Air Filter
Spark Plug
Spark Arrester (optional part)
Select Drive Cable Adjustment
TRANSPORTING
STORAGE
Fuel
Oil
Cleaning
Storage Location
Handlebar
Removing From Storage
9
9
10
11
11
11
12
12
13
13
13
14
14
14
14
14
14
15
15
TROUBLESHOOTING
15
Engine Will Not Start
15
Loss of Power
15
Vibration
15
Mowing and Bagging Problems
15
TECHNICAL INFORMATION
16
Serial Number Locations
16
High Altitude Operation
16
Emission Control System
16
Air Index
17
Specifications
17
AVOIDING FUEL-RELATED PROBLEMS 18
CUSTOMER INFORMATION
19
Parts, Accessories, and Service Items 19
Dealer Locator Information
19
How to Contact Honda
19
19
Honda Publications
DISTRIBUTOR’S LIMITED WARRANTY 21
EMISSION SYSTEM WARRANTY
22
PRODUCT REGISTRATION
23
QUESTIONS?
Contact your Honda dealer.
There is a dealer locator at
powerequipment.honda.com
00X31VH7 M010
© 2014 American Honda Motor Co., Inc. All Rights Reserved
WELCOME

Congratulations on your selection of a Honda lawn mower!
The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
We are certain you will be pleased with your purchase of one of the
finest lawn mowers on the market. We want to help you get the best
results from your new mower and to operate it safely. This manual
contains information on how to do that; please read it carefully.
When your mower needs scheduled maintenance, keep in mind that
Honda Power Equipment servicing dealership personnel are specially
trained in servicing Honda mowers and are supported by the parts
and service divisions of American Honda.
Please read the DISTRIBUTOR’S LIMITED WARRANTY on page 21
and the EMISSION CONTROL SYSTEM WARRANTY on page 22 to
fully understand what is covered by warranty and your responsibilities
of ownership.
FOR YOUR SAFETY
WARNING

California Proposition 65
This product contains or emits
chemicals known to the State of
California to cause cancer, birth
defects, or other reproductive harm.
Important Message to Parents
The safety of your children is very important to Honda. Lawn mowers
are tools, not toys. As with any equipment, bad judgments can result
in serious injuries. Your child must be big enough, strong enough, and
have the coordination necessary to comfortably reach and operate the
controls. Anyone who takes unnecessary risks and doesn’t obey rules
should not operate this lawn mower.
Safety Label Locations
Your safety and the safety of others are very important. We have
provided important safety messages in this manual and on the mower.
This information alerts you to potential hazards that could hurt you or
others. Please read these messages carefully.
Of course, it is not practical or possible to warn you about all the
hazards associated with operating or maintaining a lawn mower. You
must use your own good judgment.
Safety Instructions
You will find important safety information in a variety of forms:
• Safety Labels – on the lawn mower
• Instructions – how to use this mower correctly and safely
• Safety Messages – preceded by a safety alert  symbol and one
of three signal words: DANGER, WARNING, or CAUTION.
Each message tells you what the hazard is, what can happen, and
what you can do to avoid or reduce injury.
These signal words mean:

DANGER
You WILL be KILLED or SERIOUSLY
HURT if you don’t follow instructions.

WARNING
You CAN be KILLED or SERIOUSLY
HURT if you don’t follow instructions.

CAUTION
You CAN be HURT if you don’t follow
instructions.
• Damage Prevention Messages – you will also see other
important messages that are preceded by the word NOTICE. This
word means:
NOTICE
2
Your engine or other property can be
damaged if you don’t follow instructions.
These labels warn you of potential hazards that can cause serious
injury. Read them carefully. If a label comes off or becomes hard to
read, contact an authorized Honda servicing dealer for a replacement.
PARTS AND CONTROLS
INITIAL MOWER SETUP
BLADE CONTROL
LEVER (P. 8)
REAR
DISCHARGE
GUARD (P. 5)
FUEL TANK CAP (P. 7)
ROTO-STOP®
BUTTON (P. 8)
HANDLEBAR
ADJUST KNOB (2)
List of Parts
With help from an assistant, carefully remove the mower and loose
parts from the carton and compare the loose parts against the
following list. Contact the authorized Honda dealer from whom you
purchased the mower if any of the loose parts shown are not included
with your mower.
Ref.
No.
Description
Qty.

Grass bag frame
1

Grass bag
1

Engine oil and owner’s manual
1

(P. 4)
OIL FILLER CAP
(P. 12)
MUFFLER
(P. 13)


SELECT DRIVE
CONTROL (P. 8)
RECOIL
STARTER
GRIP (P. 9)
Adjust the Handlebar
1. With the handlebar adjust knobs in the unlocked position, raise the
handlebar into the mowing position.
CUTTING HEIGHT
ADJUSTMENT
LEVER (4) (P. 6)
THROTTLE
LEVER (P. 8)
GRASS BAG
(P. 6)
HANDLEBAR ADJUST
KNOBS
CLIP DIRECTOR®
KNOB (P. 5)
SPARK PLUG
CAP (P. 13)
AIR FILTER
CARBURETOR
(P. 12)
UNLOCKED
FUEL VALVE ON
FUEL VALVE OFF
LOCKED
2. Align the adjust knobs with one of the three holes on each handle
stay. Setting the adjust knobs in the lowest holes raises the
handlebar to its highest position.
3. Turn the handlebar adjust knobs 90 degrees into the lock position,
making sure both sides are positioned at the same height.
4. Remove all the cardboard from around the handlebar.
3
Add Engine Oil
Before Using Your Lawn Mower
The mower is shipped WITHOUT
OIL in the engine. Remove the
oil filler cap/dipstick and add the
entire contents of the included
bottle of oil into the oil filler
opening.
All Mower operators must read the following sections:
• FOR YOUR SAFETY (page 2)
• BEFORE EACH OPERATION (page 4)
• OPERATION (page 7)
• MAINTENANCE SCHEDULE (page 10)
All Honda engines are run at the
factory prior to packaging. Most
of the oil is removed prior to
shipment; however, some oil
remains in the engine. The
amount of oil left in the engine
varies.
BEFORE EACH OPERATION
Your safety is your responsibility. A little time spent in preparation will
significantly reduce your risk of injury.
If you don’t use the supplied oil, add enough SAE 10W-30 API service
category SJ or later oil to bring the oil level between the upper and
lower limit marks on the dipstick—without screwing the dipstick in
(approximately 12 to 13.5 ounces is required). See page 12.
Do not overfill the engine with oil. If the engine is overfilled, the
excess oil may get transferred to the air cleaner housing and air filter.
An indication of overfilling is white or blue smoke coming from the
muffler when the engine is running.
After filling the engine with oil, screw the filler/cap dipstick in and
remove the hang tag near the recoil starter grip that says “The engine
has no oil.”
Assemble the Grass Bag
Read and understand this manual. Know what the controls do and
how to operate them.
Familiarize yourself with the lawn mower and its operation before you
begin using it. Know how to quickly shut off the lawn mower in case of
an emergency.
Check Your Mower
For your safety, and to maximize the service life of your lawn mower, it
is very important to take a few moments before you operate the lawn
mower to check its condition. Be sure to take care of any problem you
find, or have your servicing dealer correct it, before you operate the
lawn mower.

WARNING
1. Turn the grass bag right-side out.
2. Pull the frame support legs outward and slide them into the eyelets
as shown.
Improperly maintaining this lawn mower, or failing to
correct a problem before operation, could cause a
malfunction in which you could be seriously injured.
3. Install the assembled frame into the fabric grass bag, keeping the
grass bag handle exposed.
Always perform a pre-operation inspection before each
operation, and correct any problem.
GRASS BAG HANDLE
FABRIC GRASS BAG
• Make sure the lawn mower is on a level surface
• Look around and underneath the lawn mower for signs of oil or
gasoline leaks
• Look for signs of damage
• Check each control for proper operation
• Check the blades for wear. Replace as necessary (page 11)
SUPPORT LEGS
• Check that the blade bolts are tight (page 11)
• Check that all nuts, bolts, and screws are tightened
EYELETS
• Check the air filter (page 12) and oil level (page 6)
TOP PLASTIC CLIP
(Route under the
handle and frame)
• Check the fuel level (page 7). Starting with a full tank will help to
eliminate or reduce operating interruptions for refueling.
Check Your Mowing Area
PLASTIC CLIP
Please Register Your Mower
Please take a few minutes and register your purchase with Honda.
You can register:
• By completing and mailing the registration card on the back cover
of this book
• Going on-line to powerequipment.honda.com and clicking on
Product Registration
• By scanning the QR code
4
For your safety and the safety of others, always inspect the area
before operating the lawn mower.
Anything that can be picked up by the blades and thrown is a potential
hazard to you and others. Look for things like stones, sticks, nails, and
wire, and remove them from the lawn area.
People and animals near the lawn area can move into your lawn
mower’s path or into a position where they could be struck by thrown
objects. Clear the area of pets and people, especially children. Their
safety is your responsibility.
Check the condition of the grass. Adjust your lawn mower ground
speed and mowing swath accordingly.
Clip Director®
The Clip Director can be adjusted to any one of the ten positions to
achieve the desired mowing results (bag, bag and mulch, or mulch).
FULL BAGGING OR
REAR DISCHARGE
FULL MULCHING
To adjust the Clip Director knob, pull the knob downward and towards
the rear of the mower. The knob adjusts a sliding door from the fully
open BAG position to the fully closed MULCH position.
KNOB (BAG POSITION)
KNOB (MULCH POSITION)
Some grass accumulation in the discharge opening is normal when
the Clip Director is fully closed in the MULCH position. To remove this
grass, close the discharge guard, fully open the Clip Director in the
BAG position, engage the blade control lever, and start the engine.
If a high resistance is noticed when moving the Clip Director knob
from side-to-side, excessive grass may have built up on top of the
sliding door.
SLIDING DOOR
(fully open)
CLIP DIRECTOR KNOB
SLIDING DOOR
(fully closed)
Rear Discharge
To discharge clippings to the rear, remove the grass bag and position
the Clip Director knob in the BAG range. Maximum rear discharge will
occur when the Clip Director knob is all the way to the left (BAG)
position. As the Clip Director knob is moved toward the right (MULCH)
position, less grass will be discharged through the rear discharge
guard.
SLIDING DOOR
(fully closed)
DISCHARGE
GUARD
Important Safety Precaution
Always release the blade control lever and disconnect the spark plug
cap (page 13) before lifting the discharge guard to view or clean
around the sliding door. This will prevent contact with the rotating
blades and prevent objects from being thrown into the discharge area.
Sliding Door Position
The sliding door can be positioned to produce different mowing
results. If the preferred sliding door position is unknown, install the
grass bag and begin mowing with the Clip Director knob all the way to
the BAG position. Check the appearance of the lawn. As the knob is
moved towards the MULCH position, more grass will be recycled back
into the lawn. Adjust the Clip Director knob until the desired result is
achieved.
CLIP DIRECTOR KNOB
BAGGING OR REAR DISCHARGE
AND SOME MULCHING
Fallen Leaves
Use the Clip Director to shred and collect fallen leaves for disposal.
Set the front wheels so they are one or two settings higher than the
rear. Set the Clip Director in position #9 (not quite full mulching), and
adjust the setting from this point for best results.
Collecting leaves while they are damp will help to control dust and
result in more effective mulching of the leaves.
Rear Shield
During normal use the rear shield is subject to deterioration and wear.
Remove the grass bag and raise the discharge guard to check the
rear shield for cracks or tears. If the rear shield is excessively worn,
have it replaced by your authorized Honda servicing dealer.
DISCHARGE GUARD
SLIDING DOOR
(50% open)
REAR SHIELD
5
Grass Bag
A lawn mower works like a vacuum cleaner; it blows air through the
bag fabric, which traps the grass clippings. Always empty the grass
bag before it becomes filled to the limit of its capacity. Bagging
performance will diminish after the bag becomes about 90% filled.
Also, the bag is easier to empty when it is not packed full.
You can leave the grass bag on the mower during mowing, even
when full mulching is selected.
To adjust cutting height, pull
each adjustment lever toward
the wheel, and move it into
another notch.
ADJUSTMENT LEVERS
Move all four adjustment levers
to the same position, forward
for tall grass and rearward for
short grass.
To minimize dust and fine particles from passing through the grass
bag fabric, it is best to mow grass in the morning when the ground is
slightly damp and the grass is dry.
Inspection
During use, the grass bag material is subject to normal wear and tear.

THE CUTTING HEIGHT FIGURES ARE APPROXIMATE.
3/4 in (20 mm)
1-1/4 in (32 mm)
2 in (46 mm)
2-1/2 in (62 mm)
3 in (75 mm)
3-1/2 in (88 mm)
4 in (100 mm)
CAUTION
An excessively worn grass bag may allow objects to be
thrown toward the operator.
Replace a worn grass bag to prevent possible injury.
1
Grass bag replacement is explained on page 14.
Clean any grass
clippings from the
hook channel.
•
•
3
DISCHARGE GUARD
•
GRASS BAG
HANDLE
4
1. Raise the discharge
guard and hook the
grass bag onto the
mower deck as
shown.
FORWARD
DIRECTION
2
Installation
BAG
2. Release the
discharge guard to
secure the grass
bag.
If you are not sure what cutting height to select, start with a high
setting and check the appearance of the lawn after mowing a small
area. Then readjust the cutting height if necessary.
Check the Oil Level
Removal
1. Unscrew and remove the
filler cap/dipstick and wipe
it clean.
1. Raise the discharge
guard, grasp the
grass bag handle,
and remove the
grass bag.
2. Insert and remove the
dipstick without screwing
it into the filler neck.
Check the oil level shown
on the dipstick.
2. Release the
discharge guard.
3. When the grass bag is clear of the discharge guard, you can lift it
through the handlebar opening or remove it to the rear of the
mower below the handlebar.
Cutting Height Adjustment
Each wheel of the mower can be adjusted to one of seven settings.
The actual height of cut grass will vary with lawn and soil conditions.
Be sure the engine is not running when adjusting the cutting height.
3. If the oil level is low, add oil
to reach the upper limit
mark on the dipstick.
Do not overfill. If the
engine is overfilled, the
excess oil may get
transferred to the air
cleaner housing and air
filter. An indication of
overfilling is white or blue
smoke coming from the
muffler when the engine is running.
FILLER CAP
/DIPSTICK
UPPER
LIMIT
LOWER
LIMIT
Use 10W-30 API Service category SJ oil for normal conditions. For
additional oil recommendations, see page 12.
NOTICE
Running the engine with a low oil level can cause engine damage.
4. Screw in the filler cap/dipstick securely.
6
Add Fuel
This engine is certified to operate on regular gasoline with a pump
octane rating of 86 or higher.
Never use stale or contaminated gasoline or an oil/gasoline mixture.
Avoid getting dirt or water in the fuel tank.
You may use regular unleaded gasoline containing no more than 10%
ethanol (E10) or 5% methanol by volume. In addition, methanol must
contain cosolvents and corrosion inhibitors.
Use of fuels with content of ethanol or methanol greater than shown
above may cause starting and/or performance problems. It may also
damage metal, rubber, and plastic parts of the fuel system.
Engine damage or performance problems that result form using a fuel
with percentages of ethanol or methanol greater than shown above
are not covered under warranty.

WARNING
Gasoline is highly flammable and explosive, and you can
be burned or seriously injured when refueling.
• Stop the engine and let it cool before refueling
• Keep heat, sparks, and flame away
OPERATION
For your safety, avoid starting or operating the engine in an enclosed
area, such as a garage. Your mower’s exhaust contains poisonous
carbon monoxide gas, which can collect rapidly in an enclosed area
and cause illness or death.

WARNING
Exhaust contains poisonous carbon monoxide gas that
can build up to dangerous levels in closed areas.
Breathing carbon monoxide can cause unconsciousness
or death.
Never run the lawn mower in a closed, or even partially
closed area where people may be present.
You may hear a clicking noise as you push the lawn mower forward
with the engine OFF. This is normal and will not damage the mower.
Safe Mowing Practices
Most injuries and property damage with walk-behind mowers can be
prevented if you follow all instructions in this manual and on the
mower. The most common hazards are discussed below, along with
the best way to protect yourself and others.
Avoid Rotating Blades
• Refuel only outdoors
• Wipe up spills immediately
If your equipment will be used on an infrequent or intermittent basis,
(more than 4 weeks before next use), refer to “AVOIDING
FUEL-RELATED PROBLEMS” on page 18 for information regarding
fuel deterioration.
Rotating blades can cause serious cuts and even amputate fingers,
hands, toes, or feet. Keep away from the mower deck whenever the
engine is running. If you need to adjust the cutting height or work
around the deck for any other reason, always shut off the engine.
Wear heavy gloves and disconnect the spark plug cap when you need
to clean the mower deck or handle the blades.
1. Remove the fuel tank cap.
2. Add fuel to the bottom of the red fuel level gauge in the neck of the
fuel tank. Do not overfill. Wipe up spilled fuel before starting the
engine.
RED FUEL LEVEL GAUGE

WARNING
The blades are sharp and spin at high speed. A spinning
blade can cut you severely and can amputate fingers and
toes.
• Wear protective footwear
• Keep you hands and feet away from the mower deck
while the engine is running
MAXIMUM
FUEL LEVEL
• Stop the engine before performing any adjustment,
inspection, or maintenance
Clear Mowing Area
Mower blades can throw rocks and other objects with enough force to
cause serious injury. Before mowing, carefully inspect the area and
remove all sticks, stones, pieces of wire, and other loose objects.
Never operate the blades over gravel.
NOTICE
3. Tighten the fuel tank cap until it clicks.
Move the mower at least 10 feet (3 meters) away from the fueling
source and site before starting the engine.
NOTICE
Fuel can damage paint and plastic. Be careful not to spill fuel when
filling your fuel tank. Damage caused by spilled fuel is not covered by
the DISTRIBUTOR’S LIMITED WARRANTY (page 21).
Striking objects with the spinning blades can cause severe engine
damage, which is not covered by the DISTRIBUTORS LIMITED
WARRANTY (page 21).
Keep Shields in Place
Guards and shields are designed to protect you from being hit by
thrown objects and from hot engine parts and moving components.
For your safety and the safety of others, keep all shields in place
when the engine is running.
7
Wearing protective clothing will reduce your risk of injury. Long pants
and eye protection reduce the risk of injuries from thrown objects.
Sturdy shoes with aggressive soles will help protect your feet and give
you better traction on slopes or uneven ground.
STOP
FAST
W
OP
ST


O
SL
Wear Protective Clothing
For best cut quality, always mow
with the throttle lever in the FAST
position. When the blades rotate at
the preset fast speed, they create a
strong fan action that lifts and cuts
grass more efficiently.
ST
FA
Throttle Lever
Operating the Controls
Gasoline is extremely flammable and gasoline vapor can explode.
Refuel only outdoors, in a well-ventilated area, with the engine OFF.
Never smoke near gasoline, and keep other flames and sparks away.
Always store gasoline in an approved container.
Refuel With Care
Do not try to increase the preset
FAST engine speed; the blade
could fracture and come apart.
Stop the Engine When Not Mowing
Avoid Slopes
Avoid steep slopes of more than
20°.
Mow across slopes, not up and
down. Be careful when changing
direction. Mowing on a slope
when the grass is damp or wet
could cause you to slip, fall, and
lose control of the mower.
NOTICE
Mowing on steep slopes can
starve the engine of oil, causing engine damage that is not covered by
the DISTRIBUTORS LIMITED WARRANTY (page 21).
Keep all four wheels on the ground, and be careful to avoid losing
your footing and your control of the mower. Keep a firm grip on the
handlebar, and walk, never run, with the mower. Be very careful when
mowing uneven or rough ground.
If stuck, do not kick or shove the mower with your foot. Use the
handlebar to control the mower.
Avoid Obstacles
Gravel, loose stones, and landscaping material can be picked up by
the mower and thrown many feet with enough force to cause serious
personal injury and/or property damage. The best way to prevent
potential injury from thrown objects is to release the blade control
lever to stop the blades before reaching areas with gravel, loose
stones, or landscaping material.
Be careful when mowing over obstacles that stick up above the
surface of the lawn such as sprinkler heads, paving, edging, raised
tree roots, etc.
If the blade hits something, or if the mower starts to vibrate, stop the
engine immediately, disconnect the spark plug cap, and check for
damage (page 11). Striking objects may damage the blades, bend the
crankshaft, and/or break the mower deck or other components.
Vibration usually indicates serious trouble.

WARNING
A worn, cracked, or damaged blade can break, and
pieces of the damaged blade can become dangerous
projectiles.
Thrown objects can cause serious injury.
Inspect the blades regularly (see page 11), and do not
operate the mower with a worn or damaged blade.
The DISTRIBUTOR’S LIMITED WARRANTY (page 21) does not
cover parts damaged by accidental impact collision.
8
Blade Control System
To start blade rotation, make
sure the engine is running
and the throttle lever is in the
FAST position.
 ROTO-STOP BUTTON
1. Push down and hold the
Roto-Stop® button .
2. Pull the blade control lever
 quickly against the
handlebar allowing the
engine to bring the blades
up to full speed. Then
release the Roto-Stop
button.

BLADE
CONTROL
LEVER
Continue to hold the blade control lever against the handlebar to
maintain blade rotation. Always keep the blade control lever fully
engaged while mowing. Do not partially disengage - doing so will
reduce the life of the blade clutch system.
Release the blade control lever quickly to stop blade rotation.
Always release the blade control lever before starting the engine to
prevent the blades from rotating.
Select Drive Control
With the engine running and
the blades rotating, slowly
push the Select Drive control
to propel the mower forward.
SELECT DRIVE
MIN
Normal operation is with your
hand comfortably around the
handle bar and Select Drive
control.
MAX
If you need to leave the mower for any reason, even just to inspect the
lawn ahead, stop the engine by releasing the blade control lever.
CONTROL
SELECT DRIVE CONTROL
Push the Select Drive control
with your thumb into the
indentation for extra torque
(up a hill, or through thick grass).
You can reduce the ground speed by partially releasing the Select
Drive control.
Ground speed varies with terrain, grass height, slope, and grass bag
weight. Moving the Select Drive knob (page 9) or varying how far you
push the Select Drive control forward allows you to maintain the
desired ground speed under constantly changing mowing conditions.
Release the Select Drive control to disengage (stop) the rear wheels.
Disengage the drive when mowing around trees and other obstacles.
Push the mower around obstacles for better directional control.
Adjusting the Select Drive Control Knob
The Select Drive control
knob allows you to adjust the
maximum ground speed
when the Select Drive lever
is fully engaged.
Proper maintenance is essential for safe, economical, and
trouble-free operation. It also helps reduce air pollution.
N
MI

MAX
Adjustment is from MIN to
MAX. With the Select Drive
lever fully engaged:
MIN will propel the lawn
mower at its slowest speed.
MAX will propel the lawn
mower at its fastest speed.
SERVICING YOUR MOWER
CONTROL
SELECT DRIVE CONTROL KNOB
Improper maintenance, or failure to correct a problem
before operation, can cause a malfunction in which you
can be seriously hurt or killed.
Always follow the inspection and maintenance
recommendations and schedules in this owner’s manual.
To help you properly care for your mower, the following pages include
a maintenance schedule, routine inspection procedures, and simple
maintenance procedures using basic hand tools. Other service tasks
that are more difficult or require special tools are best handled by
professionals and are normally performed by a Honda technician or
other qualified mechanic.
Starting the Engine
1. Turn the fuel valve to the ON position (page 3).
2. Move the throttle lever to the FAST
position.
SL
O
W

P
STO
FAST
ST
FA
3. Pull the starter grip lightly until you
feel resistance, and then pull briskly.
Return the starter grip gently.
WARNING
To ensure easy restarting and
maximum performance from the Auto
Choke System, allow the engine to
run for at least three minutes after starting a cold engine before
stopping the engine. This minimum run time will be longer if the
temperature is below 70°F (21°C).
The maintenance schedule applies to normal operating conditions. If
you operate your mower under severe conditions, such as sustained
high load, high temperature, or unusually wet or dusty conditions,
consult your servicing dealer for recommendations applicable to your
individual needs and use.
Remember that an authorized Honda servicing dealer knows your
mower best and is fully equipped to maintain and repair it. To ensure
the best quality and reliability, use only new, Honda Genuine parts or
their equivalents for repair and replacement.
Stopping the Engine
Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any engine repair
establishment or individual, using parts that are “certified” to
EPA standards.
1. Release the blade control lever quickly to stop blade rotation.
Maintenance Safety
2. Move the throttle lever
to the STOP position.
Some of the most important safety precautions follow. However, we
cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task.
3. When you finish
mowing, turn the fuel
valve OFF.
4. If your mower will not
be used for 3 to 4
weeks, run the
engine’s carburetor out
of fuel. You can do this
by leaving the fuel
valve OFF, restarting
the engine and running
it until it stops. See
“AVOIDING
FUEL-RELATED
PROBLEMS” on
page 18 if you don’t
plan to use your
mower for a month or
more.
BLADE
CONTROL
LEVER

STOP

WARNING
Failure to properly follow maintenance instructions and
precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this
manual.
Safety Precautions
THROTTLE
LEVER
5. Clean your mower after each mowing; refer to “Cleaning” on
page 14
• Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
– Carbon monoxide poisoning from engine exhaust.
Be sure there is adequate ventilation whenever you operate
the engine.
– Burns from hot parts.
Let the engine and exhaust system cool before touching.
– Injury from moving parts.
Do not run the engine unless instructed to do so.
• Read the instructions before you begin, and make sure you have
the tools and skills required.
• To reduce the possibility of fire or explosion, be careful when
working around gasoline. Use only a nonflammable solvent, not
gasoline, to clean parts. Keep cigarettes, sparks, and flames away
from all fuel-related parts.
9
Maintenance Schedule
Item
Action
Before
each use
5 hours
of use
or first
month
First
25 hours
of use
50 hours
of use
or every
6 months
100 hours
of use
or every
year
150 hours
of use
or every
two years
See page
Rear shield
Check
O
5
Blades
Inspect
O
11
Blade mounting bolts
Inspect
O
11
Engine oil
Check
O
6
O
Change
Air filter
Check
O (2)
O
O
O
12
12
O (1)
Clean
O (1)
O (1)
O
Replace
Grass bag
Check
O
Blade control
operation
Check
O
Spark plug
Check
6
O
8
O
13
O
Replace
O
Spark arrester
(optional part)
Clean
Select Drive cable
Adjust
Throttle cable
Adjust
Idle speed
Adjust
O (3)
Fuel tank/filter
Clean
O (3)
—
Valve clearance
Checkadjust
O (3)
—
Pinion gears
Grease
O (3)
—
Rear wheel adjuster
bushings
Inspectgrease
Fuel lines
Check
O
O
O (3)
O
O
13
O
13
O (3)
O (3)
Check every 2 years and replace if necessary (3)
—
—
(1) Service more frequently when used in dusty areas.
(2) Change engine oil every 25 hours when used under heavy load or in high outside air temperatures.
(3) These items should be serviced by an authorized Honda servicing dealer unless you have the proper tools and are mechanically proficient.
Refer to the Honda shop manual for service procedures. See “Honda Publications” on page 19 for ordering information
Failure to follow this Maintenance Schedule could result in non-warrantable failures.
10
Blade Inspection
Blade Replacement
1. Turn the fuel valve OFF (page 3).
1. Remove the two blade bolts with a 14 mm (6 point) socket wrench.
Use a wooden block to prevent the blades from turning when
removing the bolts. Remove the blades.
2. Disconnect the spark plug cap from the spark plug (page 13).
3. Tilt the mower to the right side so that the fuel cap side is up. This
will help to prevent fuel leakage and hard starting due to carburetor
flooding.
4. Inspect the blades for damage, cracks, and excessive rust or
corrosion.
UPPER BLADE
LOWER
BLADE
BLADE
BOLT (2)
BLADE BOLTS
SPECIAL
WASHER (2)
BLADES
2. Clean dirt and grass from around the blade mounting area.

3. Install the sharpened or replacement blades using the two blade
bolts and special washers as shown below.
WARNING
A worn, cracked, or damaged blade can break, and
pieces of the damaged blade can become dangerous
projectiles.
Thrown objects can cause serious injury.
Inspect the blades regularly, and do not operate the
mower with worn or damaged blades.
A dull blade can be sharpened, but a blade that is excessively worn,
bent, cracked, heavily rusted, or otherwise damaged must be
replaced.

WARNING
Operating the mower with only one blade will result in an
improperly seated blade that can be thrown from the
mower and seriously hurt or kill someone.
Always install both blades as a set.
The blade bolts and washers are specially designed for this
application. When replacing bolts and washers, use only Honda
Genuine replacement parts.
UPPER BLADE
NORMAL
TRAILING EDGE
LOWER BLADE
EXCESSIVELY WORN
TRAILING EDGE
NORMAL
WORN
BENT
BLADE BOLT [2]
AND WASHER [2]
CRACKED
If a blade is bent, take the lawn mower to an authorized Honda
servicing dealer for inspection.
Blade Mounting Bolt Inspection
Inspect the blade bolts for any signs of damage
or looseness. If they are damaged, they must
be replaced.
Blade bolt torque: 36 ~ 43 ft-lb (49 ~ 59 N·m)
If they appear loose, a torque wrench must be
used to accurately tighten the blade bolts to the
required torque. If you do not have a torque
wrench, take your lawn mower to an authorized
dealer to have the bolts replaced or tightened.
Use only Honda Genuine blade bolts and
special washers, since they are specifically
designed for this purpose. Replacement part
numbers are on page 21.
INSPECT WASHERS
AND BOLT HEADS
FOR LOOSENESS
AND DAMAGE
SPECIAL WASHER
DIRECTION
4. Tighten the blade bolts with a torque wrench to the specified
torque. Use a wooden block to prevent the blades from turning
when tightening the bolts, as shown on page 12.
Blade bolt torque: 36 ~ 43 ft-lb (49 ~ 59 N·m)
If you do not have a torque wrench, have an authorized Honda
servicing dealer tighten the blade bolts.

WARNING
If the blade bolts are not torqued properly, the blades
could loosen and be thrown from the mower and seriously
hurt or kill someone.
Ensure the blade bolts are torqued properly.
11
Engine Oil Recommendations
BLADES
Oil is a major factor affecting performance and service life. Always
change the oil in accordance with the Maintenance Schedule
(page 10).
Recommended oil for general use: SAE 10W-30
Other viscosities shown in the chart may be used when the average
temperature in your area is within the recommended range.
30
5W-30 • 10W-30
TORQUE
WRENCH
0
TORQUE:
36 ~ 43 ft-lb
(49 ~ 59 N•m)
20
-20 -10
40
0
60
10
80 100°F
20
30
40°C
WOODEN
BLOCK
Oil Change
The SAE oil viscosity and service category are in the API label on the
oil container. Honda recommends API service category SJ or later oil.
Change the oil after the first month or 5 hours of use. Thereafter,
change the oil every 6 months or 50 hours of use. Change the oil
more frequently when used under heavy load or high outdoor
temperatures. See “Engine Oil Recommendations” on this page for
recommended oil properties.
Air Filter
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
A properly maintained air filter will help prevent dirt from entering your
engine. Dirt entering the carburetor can be drawn into small passages
in the carburetor and cause premature engine wear. These small
passages can become blocked, causing starting or running problems.
To reduce the chance of scratching the side of the mower deck or
wheels when tipping, place a piece of cardboard or drop cloth on the
ground.
1. Turn the fuel valve OFF (page 3). This will reduce the possibility of
fuel leakage
2. Wipe the oil filler area clean, and then remove the oil filler
cap/dipstick.
3. Place a suitable container
next to the mower to catch
the used oil, and then tilt the
mower on its right side.
The used oil will drain
through the filler neck. Allow
the oil to drain completely.
After draining, take the oil to
your local recycling center or
service station. Do not throw
it in the trash, pour it on the
ground, or pour it down a
drain.
4. Fill with the recommended oil.
Do not overfill. Allow a couple
of minutes for the oil to settle
in the engine, and then
measure
the
oil
level
(page 4).
Refill amount:
12.0 ~ 13.5 oz.
(0.35 ~ 0.40 L)
NOTICE
Using non detergent oil can
shorten the engine’s service
life, and using 2-stroke oil can damage the engine.
12
Clean the air filter after the first 25 hours of use. Thereafter, clean the
filter every 6 months or 50 hours of use. Clean the filter more often
when used in dusty areas. Replace the filter every 2 years or 150
hours of use.
NOTICE
Operating the engine without an air filter, with a damaged air filter, or
with an improperly installed air filter cover will allow dirt to enter the
engine, causing rapid engine wear. This type of damage is not
covered by the DISTRIBUTOR’S LIMITED WARRANTY (page 21).
We recommend the use of a Honda Genuine air filter to ensure it
seals and performs as designed. Using a non-Honda air filter can
result in dirt bypassing the filter, causing damage to the engine or fuel
system.
1. Press down on the cover tabs and remove the cover.
2. Remove the filter from the air cleaner housing.
AIR CLEANER
HOUSING
FILTER
COVER
TABS
COVER
3. Inspect the filter; replace if damaged.
4. Clean the filter by tapping it several times on a hard surface to
remove dirt, or blow compressed air (not exceeding 30 psi
[207 kPa]) through the air filter from the inside. Never try to brush
off dirt; brushing will force dirt into the fibers.
5. Wipe dirt from the inside of the air cleaner housing and cover using
a moist rag. Be careful to prevent dirt from entering the air duct
that leads to the carburetor.
6. Reinstall the filter and cover. Be sure both tabs are fully locked in
place.
Spark Plug
Spark Arrester (optional part)
Replace the spark plug every 2 years or after 150 hours of use.
The spark arrester must be serviced every 100 hours to keep it
functioning as designed.
Recommended Spark Plug: NGK - BPR5ES
NOTICE
An incorrect spark plug can cause engine damage.
For good performance, the
spark plug must be properly
gapped and free of deposits.
SPARK PLUG
Your lawn mower engine is not factory-equipped with a spark arrester.
In some areas, it is illegal to operate an engine without a spark
arrester. Check local laws and regulations. An optional USDA
approved spark arrester is available from an authorized Honda
servicing dealer. See See “Honda Parts, Accessories, and Apparel”
on page 21 for part numbers.
1. Allow the engine to cool and disconnect the spark plug cap.
1. Allow the engine to cool,
disconnect the spark plug
cap, and remove any dirt
from around the spark plug
area.
2. Remove the spark plug
with a 13/16 in (21 mm)
spark plug wrench.
3. Inspect the spark plug.
Replace it if the electrodes
are worn, or if the insulator
is cracked or chipped.
4. Measure the spark plug
electrode gap with a suitable
gauge.
2. Remove the three flange bolts and the heat shield. Remove the
setscrew and the spark arrester from the muffler.
3. Check for carbon deposits on the spark arrester and the exhaust
port. Use a brush to remove any carbon deposits from the screen.
Replace the screen if it is torn or damaged.
SPARK
PLUG
CAP
4. Installation is the reverse of removal. Tighten all hardware
securely.
5. Reconnect the spark plug cap.
SPARK ARRESTER
SETSCREW
0.028 ~ 0.031 in
(0.7 ~ 0.8 mm)
Gap: 0.028 ~ 0.031 in
(0.7 ~ 0.8 mm)
Correct the gap, if necessary,
by carefully bending the side
electrode.
SEALING
WASHER
5. Install
the
spark
plug
carefully, by hand, to avoid
cross-threading.
6. After the spark plug seats,
tighten with a 13/16 in (21
mm) spark plug wrench to
compress the washer
If reinstalling the old spark plug, tighten 1/8 to 1/4 turn after the
spark plug seats.
FLANGE BOLT (3)
HEAT SHIELD
If installing a new spark plug, tighten 1/2 turn after the spark plug
seats.
Select Drive Cable Adjustment
Spark plug torque: 14 ft-lb (20 N·m)
With the engine off, loosen the jam
nut one revolution.
NOTICE
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.
7. Install the spark plug cap on the spark plug.
With the Select Drive control
released, TIGHTEN the adjuster by
turning clockwise 1 revolution by
hand, and then pull the lawn mower
rearward to check resistance.
ADJUSTER
MARK
JAM NUT
TIGHTEN
LOOSEN
If no wheel resistance exists, repeat
the above procedure until the
wheels lock when pulling rearward.
It will usually take more than 8 turns
for the wheels to lock up.
Next, mark the adjuster and
LOOSEN the adjuster
counterclockwise 8 complete
revolutions.
Hold the adjuster and tighten the
lock nut against the adjuster. Push the lawn mower forward and pull
backward and check for little or no resistance.
Start the engine to ensure the lawn mower does not move forward
without pushing the Select Drive control.
13
TRANSPORTING
If the engine has been running, allow it to cool before loading the
mower on the transport vehicle. A hot engine and exhaust system can
burn you and can ignite some materials.
Turn the fuel valve to the OFF position. This will prevent carburetor
flooding and reduce the possibility of fuel leakage.
If installed, remove the grass bag.
If a suitable loading ramp is not available, two people should lift the
mower on and off the transport vehicle while holding the mower level.
Position the mower so all four wheels are on the bed of the transport
vehicle. Tie the mower down with rope or straps, and block the
wheels. Keep the tie-down rope or straps away from the controls,
adjustment levers, cables, and the carburetor.
Fold the handlebar so the mower will take up less space. See
“Handlebar” on page 15.
Grass Bag
Remove the bag from the mower, and wash it with a garden hose or
pressure washer. Allow the bag to dry completely before storage.
Drying
After washing the lawn mower, wipe dry all accessible surfaces.
Place the mower with its wheels on a level surface. Start the engine
outdoors and let it run until it reaches normal operating temperature to
evaporate any water remaining on the engine.
Stop the engine and allow it to cool.
After the lawn mower is clean and dry, touch up any damaged paint,
and coat other areas that may rust with a light film of oil.
Oil
Change the engine oil (see page 12) if planned storage is 3 months or
longer or when storing in a high humidity environment.
Add oil in the engine cylinder to prevent rust.
1. Remove the spark plug (page 13).
STORAGE
2. Pour a teaspoon (5 cc) of clean
engine oil into the cylinder to
keep it from rusting.
Proper storage preparation is essential for keeping your lawn mower
trouble free and looking good. To help keep rust and corrosion from
impairing your lawn mower’s function and appearance, and to make
the engine easier to start after storage, follow the instructions
described in this section to:
3. Pull the starter rope several
times to distribute the oil in the
cylinder.
•
•
•
•
5. Pull the starter rope slowly until
resistance is felt, and then
return the starter grip gently. SPARK
This will close the valves so PLUG
moisture cannot enter the HOLE
engine cylinder.
Drain or treat the fuel
Change the oil and coat the engine cylinder
Clean the mower, engine, and grass bag
Choose a storage location
Fuel
See “AVOIDING FUEL-RELATED PROBLEMS” on page 18 for a list
of recommended procedures to avoid fuel related problems.
The DISTRIBUTOR’S LIMITED WARRANTY (page 21) does not
cover fuel system damage or engine performance problems resulting
from neglected storage preparation.
Cleaning
Mower Deck
Before washing the underside of the mower deck, stop the engine and
turn the fuel valve to the OFF position. Rest the mower on its right
side, so the fuel cap side is up. This will help to prevent fuel leakage
and hard starting due to carburetor flooding. Wear heavy gloves to
protect your hands from the blades.
Be careful to avoid getting water into controls and cables.
Engine
Wash the engine by hand, and be careful to prevent water from
entering the air cleaner and exhaust opening.
NOTICE
Using a garden hose or pressure washing equipment can force water
into the air filter. Water in the air cleaner will soak the paper element
and can enter the carburetor or engine cylinder, causing damage.
Water contacting a hot engine can cause damage. If the engine has
been running, allow it to cool before washing.
14
OIL
4. Reinstall the spark plug.
Storage Location
If your mower will be stored with gasoline in the fuel tank and
carburetor, it is important to reduce the hazard of gasoline vapor
ignition. Select a well-ventilated dry storage area away from any
appliance that operates with a flame, such as a furnace, water heater,
or clothes dryer. Also avoid any area with a spark-producing electric
motor, or where power tools are operated.
Make sure the fuel valve is in the OFF position to reduce the
possibility of fuel leakage.
Place the mower with its wheels on a level surface. Tilting can cause
fuel or oil leakage.
With the engine and exhaust system cool, cover the mower to keep
out dust. A hot engine and exhaust system can ignite or melt some
materials. Do not use sheet plastic as a dust cover. A nonporous
cover will trap moisture around the mower, promoting rust and
corrosion.
Handlebar
Loss of Power
Remove the grass bag if installed. You can place it on top of the
engine with the bag opening to the front.
UNLOCKED
1. Turn the handlebar adjust knobs 90 degrees to unlock the locating
pins 
2. Fold the handlebar forward ; do not pinch or kink the cable.
Removing From Storage
When unfolding the handlebar, be sure to lock the handlebar adjust
knobs to secure the handlebar in the mowing position.
Check your mower as described in “BEFORE EACH OPERATION” on
page 4.
If the cylinder was coated with oil during storage preparation, the
engine may smoke briefly at startup.
TROUBLESHOOTING
Engine Will Not Start
Possible Cause
Correction
Throttle lever in the wrong position
Move the throttle lever to the
FAST position (page 9)
Fuel valve OFF
Turn the fuel valve ON
(page 3).
Possible Cause
Correction
Grass is too tall
•
•
•
•
Grass is too wet
Allow the grass to dry
Mower deck is clogged
Clean out the mower deck
(page 14).
Air filter is clogged
Clean or replace the air filter
(page 12).
Bad fuel; mower stored without
treating gasoline, or refueled with
bad gasoline
Refuel with fresh gasoline
(page 7).
Fuel filter clogged, carburetor
malfunction, ignition malfunction,
valves stuck, etc.
Take the mower to an
authorized Honda servicing
dealer for repair.
Vibration
Possible Cause
Correction
Grass and debris lodged under the
mower deck
Clean out the mower deck
(page 14).
Blades loose
Tighten loose blade bolts
(page 11).
Blades bent, damaged, or
unbalanced by improper
sharpening
Take the mower to an
authorized Honda servicing
dealer for repair.
Mechanical damage, such as a
bent crankshaft
Mowing and Bagging Problems
Possible Cause
Out of fuel
Refuel (page 7).
Bad fuel; mower stored without
treating gasoline, or refueled with
bad gasoline
Refuel with fresh gasoline
(page 7).
Spark plug faulty, fouled, or
improperly gapped
Gap or replace the spark plug
(page 13).
Spark plug wet with fuel (flooded
engine)
Dry and reinstall the spark
plug.
Fuel filter clogged, carburetor
malfunction, ignition malfunction,
valves stuck, etc.
Take the mower to an
authorized Honda servicing
dealer for repair.
Raise the cutting height
Cut a narrower swath
Use a slower ground speed
Cut more frequently
Correction
Mower is moving too fast for lawn
conditions
Adjust the Select Drive knob
toward MIN position (page 9).
Cutting height adjustment levers
set at different positions
Set all levers at the same
cutting height position
(page 6).
Grass bag is clogged
Wash the grass bag
(page 14).
Mower deck is clogged
Clean out the mower deck
(page 14).
Grass is too wet
Allow the grass to dry
Grass is too tall
•
•
•
•
Blades dull, worn, or damaged
Sharpen or replace the
blades if necessary
(page 11).
Wrong blades installed
Install correct blades
(page 11).
Raise the cutting height
Cut a narrower swath
Use a slower ground speed
Cut more frequently
15
Emission Control System
TECHNICAL INFORMATION
Source of Emissions
The combustion process produces carbon monoxide, oxides of
nitrogen, and hydrocarbons. Control of hydrocarbons and oxides of
nitrogen is very important because, under certain conditions, they
react to form photochemical smog when subjected to sunlight. Carbon
monoxide does not react in the same way, but it is toxic.
Serial Number Locations
Honda utilizes appropriate air/fuel ratios and other emissions control
systems to reduce the emissions of carbon monoxide, oxides of
nitrogen, and hydrocarbons. Additionally, Honda fuel systems utilize
components and control technologies to reduce evaporative
emissions.
U.S. and California Clean Air Acts, and Canadian
Environment Protection Act
ENGINE
SERIAL NUMBER
MODEL NAME AND
FRAME SERIAL NUMBER
CONFORMS TO ANSI B 71.1-SAFETY STANDARD
HRX2175VYA
MAGA –– XXXXXXX
GH
American Honda Motor Co., Inc.
Alpharetta, GA 30005-8847
There are two serial numbers, one for the engine and one for the
mower frame. Record the engine and frame serial numbers in the
space below. You will need these serial numbers when ordering parts
and when making technical or warranty inquiries.
Engine serial number: _________________________________
Frame serial number: __________________________________
Date of purchase: _____________________________________
High Altitude Operation
At high altitudes, the standard carburetor air-fuel mixture will be too
rich. Performance will decrease, and fuel consumption will increase. A
very rich mixture will also foul the spark plug and cause hard starting.
Operation at an altitude that differs from that at which this engine was
certified, for extended periods of time, may increase emissions.
High altitude performance can be improved by specific modifications
to the carburetor. If you always operate your lawn mower at altitudes
above 5,000 feet (1,500 meters), have your servicing dealer perform
this carburetor modification. This engine, when operated at high
altitude with the carburetor modifications for high altitude use, will
meet each emission standard throughout its useful life.
Even with carburetor modification, engine horsepower will decrease
about 3.5% for each 1,000-foot (300-meter) increase in altitude. The
effect of altitude on horsepower will be greater than this if no
carburetor modification is made.
NOTICE
When the carburetor has been modified for high altitude operation,
the air-fuel mixture will be too lean for low altitude use. Operation at
altitudes below 5,000 feet (1,500 meters) with a modified carburetor
may cause the engine to overheat and result in serious engine
damage. For use at low altitudes, have your servicing dealer return
the carburetor to original factory specifications.
16
U.S. EPA, California, and Canadian regulations require all
manufacturers to furnish written instructions describing the operation
and maintenance of emissions control systems.
The following instructions and procedures must be followed in order to
keep the emissions from your Honda engine within the emissions
standards.
Tampering and Altering
NOTICE
Tampering is a violation of Federal and California law.
Tampering with or altering the emissions control system may increase
emissions beyond the legal limit. Among those acts that constitute
tampering are:
• Removal or alteration of any part of the intake, fuel, or exhaust
systems
• Altering or defeating the speed-adjusting mechanism to cause the
engine to operate outside its design parameters
Problems That May Affect Emissions
If you are aware of any of the following symptoms, have your engine
inspected and repaired by your servicing dealer.
•
•
•
•
Hard starting or stalling after starting
Rough idle
Misfiring, backfiring under load, or afterburning
Black exhaust smoke or high fuel consumption
Replacement Parts
The emissions control systems on your new Honda engine were
designed, built, and certified to conform with EPA, California, and
Canadian emissions regulations. We recommend the use of Honda
Genuine parts whenever you have maintenance done. These
original-design replacement parts are manufactured to the same
standards as the original parts, so you can be confident of their
performance. The use of replacement parts that are not of the original
design and quality may impair the effectiveness of your emissions
control system.
A manufacturer of an aftermarket part assumes the responsibility that
the part will not adversely affect emissions performance. The
manufacturer or rebuilder of the part must certify that use of the part
will not result in a failure of the engine to comply with emissions
regulations.
Maintenance
Follow the Maintenance Schedule on page 10. Remember this
schedule is based on the assumption that your machine will be used
for its designed purpose. Sustained high-load or high-temperature
operation, or use in unusually wet or dusty conditions, will require
more frequent service.
Air Index
Maintenance
An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.
Fuel
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating the engine’s emission durability period. The descriptive term
indicates the useful life period for the engine’s emission control
system. See your EMISSION SYSTEM WARRANTY (page 22) for
additional information.
Descriptive Term
Unleaded gasoline with a pump
octane rating of 86 or higher containing
no more than 10% ethanol by volume
page 7
Capacity: 0.25 US gal (0.93 L)
See “AVOIDING FUEL-RELATED
PROBLEMS” on page 18
Blade Bolt
Torque
Engine Oil
Applicable to Emissions
Durability Period
36 ~ 43 ft-lb (49 ~ 59 N•m)
SAE 10W-30, API SJ or later
Capacity: 17.0 oz (0.50 L)
Refill amount: 12.0 ~ 13.5 oz
(0.35 ~ 0.40 L)*
page 11
page 12
Moderate
50 hours (0 ~ 80 cc)
125 hours (greater than 80 cc)
Spark Plug
Type: NGK - BPR5ES
Gap: 0.028 ~ 0.031 in (0.7 ~ 0.8 mm)
page 13
Intermediate
125 hours (0 ~ 80 cc)
250 hours (greater than 80 cc)
Select Drive
Cable
Adjust for proper operation.
page 13
Extended
300 hours (0 ~ 80 cc)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)
Idle speed
(lever at
SLOW)
1,700 +/- 150 rpm
Shop
manual
Maximum
Governed
Speed
3,100 +0/-150 rpm **
Shop
manual
Valve
clearance
(cold)
Intake: 0.15 ± 0.04 mm
Exhaust: 0.20 ± 0.04 mm
Shop
manual
Specifications
Mower Features
HRX2175VYA
Honda rotary mower, 21-inch mower
deck, Clip Director, Select Drive variable
speed transmission, Roto-Stop blade
brake clutch, Auto Choke System
Dimensions and Weights
Length
64.5 in (1638 mm)
Width
23 in (585 mm)
Overall height *
40.0 in (1016 mm)
Dry weight
96.1 lb (43.6 kg)
Cutting width
21.0 in (530 mm)
Cutting heights (7)
* Actual amount will vary due to residual oil in the engine. Always
use the dipstick to confirm the actual level (page 6).
**Do not try to increase the engine speed above the maximum
governed speed; the blades could fracture and come apart.
3/4 ~ 4 in (20 ~ 102 mm)
* 1-1/4 inch cutting height and handle in highest position
Engine Design and Performance
Model
GCV190
Type
4-stroke, overhead-cam,
single-cylinder, air-cooled
Displacement
Bore and stroke
Compression ratio
Ignition system
11.4 cu in (186 cc)
2.71 x 1.97 in (69.0 x 50.0 mm)
8.5:1
Transistorized magneto
Transmission Design and Performance
Transmission type
Variable speed
Ground speeds
0 ~ 4.0 mph
(0 ~ 1.78 m/s)
17
AVOIDING FUEL-RELATED PROBLEMS
When properly maintained, your Honda lawn mower should provide years of trouble-free operation. This includes the fuel system. However,
gasoline can quickly deteriorate (in as little as 30 days) causing starting or running problems and, in some cases, damage to the fuel system.
Most fuel-related problems can be avoided by following the precautions listed below. Fuel system damage and engine performance problems
resulting from deteriorated gasoline are not covered by the Distributor’s Limited Warranty (see page 21).
Follow These Precautions to Prevent Most Fuel-Related Problems
During the Normal Mowing Season
Reason
Do not use gasoline containing more than 10% ethanol (E10). Not
all automotive gasoline is safe to use in your lawn mower.
Higher levels of ethanol in gasoline attract water, and can corrode or
damage the fuel system and cause performance problems.
Store gasoline in a clean, plastic, sealed container approved for fuel
storage.
Store your fuel supply container away from direct sunlight; if the
container has a vent, keep it closed.
A plastic container eliminates the risk of rust and metallic
contaminants from a metal container entering the fuel system.
Gasoline will deteriorate faster when exposed to air and sunlight.
Purchase only enough gasoline to last for 1 to 2 months (about 30 to
60 days).
If you purchase enough gasoline to last for more than 60 days, add
a fuel stabilizer to your storage container when you fill it.
Gasoline deteriorates with age so try to avoid storing it for long
periods, especially in summer heat.
Fuel stabilizer will extend the shelf life of gasoline, but it will not
reconstitute stale fuel.
Keep your lawn mower’s fuel tank full of fresh fuel when not in use.
Turn the fuel valve OFF.
If the fuel tank is only partially filled, air in the tank will promote fuel
deterioration.
Keep the air filter clean and properly serviced. Check it before each
use.
A properly maintained air filter will help prevent dirt from entering the
carburetor. The small passages inside the carburetor can become
blocked.
3 to 4 Weeks Before Next Use
Reason
Keep your lawn mower’s fuel tank full of fresh fuel when not in use.
Turn the fuel valve OFF.
If the fuel tank is only partially filled, air in the tank will promote fuel
deterioration.
Turn the fuel valve to the OFF position, start the engine and let it run
approximately 3 minutes until the carburetor is empty and the
engine stops.
The small amount of gasoline in your engine’s carburetor will
deteriorate faster than the fuel in the fuel tank due to its small
volume and heat from the engine.
1 to 3 Months Before Next Use
Reason
If you did not add fuel stabilizer to your fuel storage container when
you filled it up, fill your lawn mower’s fuel tank with fresh gasoline.
If the fuel tank is only partially filled, air in the tank will promote fuel
deterioration.
Add fuel stabilizer to the lawn mower’s fuel tank according to the
stabilizer manufacturer’s instructions.
Fuel stabilizer will extend the life of gasoline, but it will not
reconstitute stale gasoline.
Run the engine outdoors for 10 minutes.
This makes sure treated gasoline has replaced untreated gasoline
throughout the fuel system.
Turn the fuel valve to the OFF position, start the engine, and let it
run approximately 3 minutes until the carburetor is empty and the
engine stops.
The small amount of gasoline in your engine’s carburetor will
deteriorate faster than the fuel in the fuel tank due to its small
volume and heat from the engine.
More Than 3 Months Before Next Use
Start the engine and let it run long enough to empty all the gasoline
from the entire fuel system, including the fuel tank.
Do not allow gasoline to remain in your lawn mower’s fuel tank for
more than 3 months (about 90 days) of inactivity.
Reason
All fuel stabilizers have a shelf life. It is good practice to empty the
fuel system for long term inactivity.
If you have fuel left in your storage container at the end of the operating season, recycle the fuel into your car’s fuel tank or dispose of it
properly.
18
CUSTOMER INFORMATION
Dealer Locator Information
To find an Authorized Honda Servicing Dealer anywhere in the United
States:
Parts, Accessories, and Service Items
Visit powerequipment.honda.com and click on Find a Dealer.
Contact an authorized Honda servicing dealer to purchase any of
these (or other) Honda Genuine items for your lawn mower.
How to Contact Honda
Replacement Parts
Honda Power Equipment dealership personnel are trained
professionals. They should be able to answer any question you may
have. If you encounter a problem that your dealer does not solve to
your satisfaction, please discuss it with the dealership's management.
The Service Manager or General Manager can help. Almost all
problems are solved in this way.
Item
Spark plug
Part Number
98079-55846
Notes
NGK (brand) BPR5ES
Air filter
17211-Z8B-901
Paper
Lower blade
72511-VH7-000
Upper blade
72531-VH7-000
Always use an upper
and lower blade as a
set.
Blade bolt
90105-960-710
2 required, 10 x 20 mm
Spring washer
90502-VG3-000
Grass bag
81320-VH7-D00
Wheel/tire
Spark arrester
kit
Lawn mower
cover
Or telephone: (770) 497-6400
42710-VH7-010ZA
Rear
44710-VH7-010ZA
Front
•
•
•
•
•
•
Part Number
06180-Z0J-000
08P59-VE2-000AH
Part Number
These publications will give you information for maintaining and
repairing your lawn mower.
Custom fitted,
waterproof, and
breathable
Keep this owner’s manual handy so you can refer to it at any time.
Consider this owner’s manual a permanent part of the lawn mower;
please give it to the new owner if you resell the lawn mower.
Notes
NO-SPILL®
gas cans
06176-1415-C6
1-1/4 gallon
06176-1405-C6
2-1/2 gallon
Matte black
touch-up paint
08707-NH105
Model and serial numbers (page 16)
Name of the dealer who sold the lawn mower to you
Name and address of the dealer who services your lawn mower
Date of purchase
Your name, address, and telephone number
A detailed description of the problem
Honda Publications
08207-10W30
08732-0800
When you write or call, please give us this information.
Includes spark
arrester, ID plate, and
screw
SAE 10W-30
engine oil
Fuel stabilizer
M-F, 8:30 a.m. - 7:00 p.m. ET
Notes
Service Items
Item
American Honda Motor Co., Inc.
Power Equipment Division
Customer Relations Office
4900 Marconi Drive
Alpharetta, GA 30005-8847
Fabric bag only, no
frame
Accessories
Item
If you are dissatisfied with the decision made by the dealership's
management, contact the Honda Power Equipment Customer
Relations Office. You can write:
1 quart
8 ounces
For short and
long term storage
For handlebar only
(aerosol can)
® NO-SPILL is a registered trademark of NoSpill LLC.
Owner’s Manual
The information and specifications included in this publication were in
effect at the time of approval for printing. American Honda Motor Co.,
Inc. reserves the right, however, to discontinue or change
specifications or design at any time without notice and without
incurring any obligation whatever. No part of this publication may be
reproduced without written permission.
Shop Manual
This manual covers complete maintenance and overhaul procedures.
It is intended to be used by a skilled technician. Available through
your Honda dealer or visit powerequipment.honda.com and click on
Product Support and then click on Shop Manuals.
Parts Catalog
This manual provides complete, illustrated parts lists, and is available
through your Honda dealer.
Frequently Asked Questions
The Honda Power Equipment web site provides
additional information for users of Honda power
equipment. Visit powerequipment.honda.com and
click on FAQs or scan the QR code shown.
19
20
DISTRIBUTOR’S LIMITED WARRANTY
Honda Power Equipment
This warranty is limited to the following Honda Power Equipment products when
distributed by American Honda Motor Co., Inc., Power Equipment Division, 4900 Marconi
Drive, Alpharetta, Georgia 30005-8847, purchased at retail or placed in rental service on
or after January 1, 2010.
PRODUCTS COVERED
BY THIS WARRANTY
HRX Mower and deck(2)
LENGTH OF WARRANTY
(from date of original retail purchase)
PRIVATE
RESIDENTIAL(1)
COMMERCIAL/RENTAL/
INSTITUTIONAL
60 months
3 months
(1) Private residential: Used in maintaining owner’s primary and/or secondary residence.
Any other use, including but not limited to informal “for hire” use, is considered
commercial/rental/institutional use.
(2) Limited lifetime warranty on mower deck is valid for the original purchaser for private
residential use only.
To Qualify for This Warranty:
The product must be purchased in the United States, Puerto Rico, or the U.S. Virgin
Islands from American Honda or a dealer authorized by American Honda to sell
those products. This warranty applies to first retail purchaser and each subsequent
owner during the applicable warranty time period, unless noted otherwise.
What American Honda Will Repair or Replace Under Warranty:
American Honda will repair or replace, at its option, any part that is proven to be
defective in material or workmanship under normal use during the applicable
warranty time period. Warranty repairs and replacements will be made without
charge for parts or labor. Anything replaced under warranty becomes the property of
American Honda Motor Company, Inc. All parts replaced under warranty will be
considered as part of the original product, and any warranty on those parts will
expire coincident with the original product warranty.
To Obtain Warranty Service:
You must, at your expense, take the Honda Power Equipment product, accessory,
replacement part, apparel, or the power equipment on which the
accessory or replacement part is installed, and proof of purchase to any Honda
Power Equipment dealer in the United States, Puerto Rico, or the
U.S. Virgin Islands who is authorized to sell and/or service that product, during the
dealer’s normal business hours. To locate a dealer near you, visit
our web site at http://PowerEquipment.Honda.com and click on Find a Dealer.
If you are unable to obtain warranty service or are dissatisfied with the warranty
service you receive, contact the owner of the dealership involved;
normally this will resolve the problem. However, if you should require further
assistance, write or call the Power Equipment Customer Relations Department of
American Honda Motor Co., Inc. See “How to Contact Honda” on page 19.
Exclusions:
1. Any damage or deterioration resulting from the following:
•
•
•
•
•
•
•
2.
3.
4.
Neglect of the periodic maintenance as specified in this manual
Improper repair or maintenance
Operating methods other than those indicated in this manual
The use of non-genuine Honda parts, accessories, lubricants, and fluids other
than those approved by Honda
Exposure of the product to soot and smoke, chemical agents, bird droppings,
sea water, sea breeze, salt or other environmental phenomena
Collision, fuel contamination or deterioration, neglect, unauthorized alteration,
misuse, incorporation or use of unsuitable attachments or parts
Normal wear and tear (including, but not limited to, normal fading of painted or
plated surfaces, sheet peeling, and other natural deterioration)
Consumable parts: Honda does not warrant parts deterioration due to normal
wear and tear. The following parts are not covered by warranty (unless they are
needed as a part of another warranted repair): spark plug, fuel filter, air cleaner
element, clutch disc, tire, wheel bearing, recoil starter rope, cable, belt, cutter
blade, oil, and grease.
Cleaning, adjustment, and normal periodic maintenance work (carburetor
cleaning, engine oil draining, blade sharpening, belt and cable adjustments).
Any product that has ever been declared a total loss or sold for salvage by a
financial institution or insurer.
Auger and paddle assemblies of snow throwers, tiller tines of roto-tillers, mower
blades and mower deck housings, are specifically not warranted against impact
damage, including but not limited to, abrasive damage.
Any implied warranties are limited to the duration of this written limited warranty.
Some states do not allow limitations on how long an implied warranty lasts and/or
do not allow the exclusion or limitation of incidental or consequential damages, so
the above exclusions and limitations may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to
state.
Honda Parts, Accessories, and Apparel
This warranty is limited to Honda Power Equipment parts, accessories, and apparel when
distributed by American Honda Motor Co., Inc., 4900 Marconi Drive, Alpharetta, Georgia
30005-8847.
PRODUCTS COVERED
BY THIS WARRANTY
LENGTH OF WARRANTY
(from date of original retail purchase)
PRIVATE
RESIDENTIAL
COMMERCIAL/RENTAL/
INSTITUTIONAL
Parts
6 months
3 months
Accessories
12 months
3 months
Apparel
6 months
3 months
To Qualify for This Warranty:
The parts, accessories, or apparel must be purchased from American Honda or a
dealer authorized by American Honda to sell those products in the United States,
Puerto Rico, and the U.S. Virgin Islands. Parts and Accessories must be purchased
for installation on original Honda equipment or engines to be eligible for warranty
coverage. Installing parts and accessories on non-Honda products or engines voids
this warranty.
You must be the first retail purchaser. This warranty is not transferable to
subsequent owners.
What American Honda Will Repair or Replace Under Warranty:
American Honda will repair or replace, at its option, any Honda Power Equipment
parts, accessories, replacement parts, or apparel that are proven to be defective in
material or workmanship under normal use during the applicable warranty time
period. Anything replaced under warranty becomes the property of American Honda
Motor Company, Inc. The warranty on all parts, accessories, and apparel replaced
under warranty will expire coincident with the original warranty on the replaced
parts, accessories, or apparel.
Parts and accessories installed by a dealer who is authorized by American Honda to
sell them will be repaired or replaced under warranty without charge for parts or
labor. If installed by anyone else, parts and accessories will be repaired or replaced
under warranty without charge for parts, but any labor charges will be the
responsibility of the purchaser.
Apparel will be repaired or replaced under warranty without any charge.
To Obtain Warranty Service:
You must, at your expense, take the Honda Power Equipment part, accessory,
apparel or the Honda Power Equipment on which the part or accessory is installed,
and proof of purchase to any Honda Power Equipment dealer in the United States,
Puerto Rico, or the U.S. Virgin Islands who is authorized to sell that product, during
the dealer's normal business hours. To locate a dealer near you, visit our web site at
http://PowerEquipment.Honda.com and click on Find a Dealer.
If you are unable to obtain warranty service or are dissatisfied with the warranty
service you receive, contact the owner of the dealership involved; normally this will
resolve the problem. However, if you should require further assistance, write or call
the Power Equipment Customer Relations Department of American Honda Motor
Co., Inc. See “How to Contact Honda” on page 19.
Exclusions:
This warranty does not extend to parts, accessories, or apparel affected or
damaged by collision, normal wear, use in an application for which the product was
not designed or any other misuse, neglect, incorporation or use of unsuitable
attachments or parts, unauthorized alteration, improper installation, or any causes
other than defects in material or workmanship of the product. Installing parts and
accessories on non-Honda products or engines voids this warranty.
Disclaimer of Consequential Damage and Limitation of Implied
Warranties:
Disclaimer of Consequential Damage and Limitation of Implied
Warranties:
American Honda disclaims any responsibility for loss of time or use of the product,
or the power equipment on which the product is installed, transportation,
commercial loss, or any other incidental or consequential damage. Any implied
warranties are limited to the duration of this written warranty. Some states do not
allow limitations on how long an implied warranty lasts and/or do not allow the
exclusion or limitation of incidental or consequential damages, so the above
exclusions and limitations may not apply to you.
American Honda disclaims any responsibility for loss of time or use of the product,
transportation, commercial loss, or any other incidental or consequential damage.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
PWL50623-S
5.
21
EMISSION SYSTEM WARRANTY
Your new Honda Power Equipment engine complies with the U.S. EPA,
Environment Canada, and State of California emission regulations (models certified
for sale in California only). American Honda Motor Co., Inc. provides the emission
warranty coverage for engines in the United States and its territories. Honda
Canada Inc. provides the emission warranty for engines in the 13 provinces and
territories of Canada. In the remainder of this Emission Control System Warranty,
American Honda Motor Company Inc. and Honda Canada Inc. will be referred to as
Honda.
YOUR WARRANTY RIGHTS AND OBLIGATIONS:
CALIFORNIA
The California Air Resources Board and Honda are pleased to explain the emission
control system warranty on your 2014 and later Honda Power Equipment engine. In
California, new spark-ignited small off-road equipment engines must be designed,
built, and equipped to meet the state's stringent anti-smog standards. Specific
Honda products that do not meet the California emissions regulations can be
identified by a “Not for sale in California” decal.
OTHER STATES, U.S. TERRITORIES, AND CANADA
In other areas of the United States and in Canada, your engine must be designed,
built, and equipped to meet the U.S. EPA and Environment Canada emission
standards for spark-ignited engines at or below 19 kilowatts.
ALL OF THE UNITED STATES AND CANADA
Honda must warrant the emission control system on your power equipment
engine for the period of time listed below, provided there has been no abuse,
neglect, or improper maintenance of your power equipment engine. Where a
warrantable condition exists, Honda will repair your power equipment engine at
no cost to you including diagnosis, parts, and labor.
Your emission control system may include such parts as the carburetor or fuel
injection system, the ignition system, and catalytic converter. Also included
may be hoses, connectors, and other emission-related assemblies (see page
2 for additional covered parts).
OWNER'S WARRANTY RESPONSIBILITY:
As the power equipment engine owner, you are responsible for completing all
required maintenance listed in your owner's manual. Honda recommends that
you retain all receipts covering maintenance on your power equipment engine,
but Honda cannot deny warranty coverage solely for the lack of receipts or for
your failure to ensure that all scheduled maintenance has been completed.
As the power equipment engine owner, you should however be aware Honda
may deny you warranty coverage if your power equipment engine or a part has
failed due to abuse, neglect, improper maintenance, or unapproved
modifications.
You are responsible for presenting your power equipment engine to a Honda
Power Equipment dealer as soon as a problem exists. The emission related
warranty repairs should be completed in a reasonable amount of time, not to
exceed 30 days.
warranted part during the warranty period.
The use of replacement parts not equivalent to the original parts may impair
the effectiveness of your engine emission control system. If such a
replacement part is used in the repair or maintenance of your engine, and an
authorized Honda dealer determines it is defective or causes a failure of a
warranted part, your claim for repair of your engine may be denied. If the part
in question is not related to the reason your engine requires repair, your claim
will not be denied.
TO OBTAIN WARRANTY SERVICE:
You must, at your own expense, take your Honda Power Equipment engine or
the product on which it is installed, along with your sales registration card or
other proof of original purchase date, to any Honda Power Equipment dealer
who is authorized by Honda to sell and service that Honda product during their
normal business hours. Claims for repair or adjustment found to be caused
solely by defects in material or workmanship will not be denied because the
engine was not properly maintained and used.
If you are unable to obtain emission warranty service or are dissatisfied with
the warranty service you received, contact the owner of the dealership
involved. Normally this should resolve your problem. However, if you require
further assistance, contact the Honda office in your region. Refer to adjacent
column for contact information.
EXCLUSIONS:
Failures other than those resulting from defects in material or workmanship are
not covered by this warranty. This warranty does not extend to emission control
systems or parts that are affected or damaged by owner abuse, neglect,
improper maintenance, misuse, misfueling, improper storage, collision, the
incorporation of, or use of, unsuitable attachments, or the unauthorized
alteration of any part.
This warranty does not cover replacement of expendable maintenance items
made in connection with required maintenance service after the item’s first
scheduled replacement as listed in the maintenance section of the product
owner’s manual, such as: spark plugs and filters.
DISCLAIMER OF CONSEQUENTIAL DAMAGE AND LIMITATION
OF IMPLIED WARRANTIES:
American Honda Motor Co., Inc. and Honda Canada Inc. disclaim any
responsibility for incidental or consequential damages such as loss of time or
the use of the power equipment, or any commercial loss due to the failure of the
equipment; and any implied warranties are limited to the duration of this written
warranty. This warranty is applicable only where the California, U.S. EPA, or
Environment Canada emission control system warranty regulation is in effect.
SYSTEMS COVERED
BY THIS WARRANTY:
PARTS
DESCRIPTION:
Fuel Metering
Carburetor assembly, (includes starting
enrichment system), Engine temperature sensor,
Engine control module, Fuel regulator, Intake
manifold
Evaporative
Fuel tank, Fuel cap, Fuel hoses, Vapor hoses,
Carbon canister, Canister mounting brackets,
Fuel strainer, Fuel cock, Fuel pump, Fuel hose
joint, Canister purge hose joint
Exhaust
Catalyst, Exhaust manifold
Air Induction
Air filter housing, Air filter element*
Ignition
Flywheel magneto, Ignition pulse generator,
Crankshaft position sensor, Power coil, Ignition
coil
assembly, Ignition control module, Spark plug
cap, Spark plug*
Crankcase Emission Control
Crankcase breather tube, Oil filler cap
Miscellaneous Parts
Tubing, fittings, seals, gaskets, and clamps
associated with these listed systems.
If you have any questions regarding your emission warranty rights and
responsibilities, you should contact the Honda office in your region.
American Honda Motor Co., Inc.
Power Equipment Customer
Relations
4900 Marconi Drive
Alpharetta, Georgia 30005-8847
Telephone: (888) 888-3139
or
Honda Canada Inc.
Power Equipment Customer
Relations
180 Honda Blvd.
Markham, ON, L6C 0H9
Telephone: (888) 946-6329
Email: powerequipmentemissions
@ahm.honda.com
WARRANTY COVERAGE:
Honda power equipment engines sold in the United States and Canada are
covered by this warranty for a period of two years from the date of delivery to
the original retail purchaser or the length of the Honda Distributor’s Limited
Warranty, whichever is longer. This warranty is transferable to each subsequent
purchaser for the duration of the warranty period.
If any emission-related part on your engine is defective, the part will be repaired
or replaced by Honda without charge for diagnosis, parts, or labor. All defective
parts replaced under this warranty become the property of Honda. Only Honda
approved replacement parts may be used in the performance of any warranty
repairs and must be provided without charge to the owner. A list of warranted
parts is on the reverse side of this warranty statement. Normal maintenance
items, such as spark plugs and filters, that are on the warranted parts list are
warranted up to their required replacement interval only.
Honda will also replace other engine components damaged by a failure of any
22
Note: This list applies to parts supplied by Honda and does not cover parts
supplied by the equipment manufacturer. Please see the original
equipment manufacturer’s emissions warranty for non-Honda parts.
* Covered up to the first required replacement only. See the Maintenance
Schedule on page 10.
PWL50975-O
PRODUCT REGISTRATION
Thank you for choosing Honda!
Please register your lawn mower within 30 days of purchase to ensure you receive
important service information in the event of a product update or recall
and for added coverage during certain sales promotions.
Your information will remain confidential.
It will not be released to any other company or organization.
There are three ways to register, select one:
Complete and mail the postage paid card shown below
• Complete and submit the on-line form at powerequipment.honda.com
Scan the QR code below and then complete and submit the on-line form
•
•
CONFORMS TO ANSI B 71.1-SAFETY STANDARD
HRX2175VYA
MAGA –– XXXXXXX
GH
American Honda Motor Co., Inc.
Alpharetta, GA 30005-8847
Print your 7 digit serial number here.
* Dealer Store number
Serial number
* Dealer ZIP code
M A G A—
*If available
Owner's Last Name
First Name
Company Name (commercial/rental users)
Telephone
(
)
Address
City
y
State
ZIP Code
E-mail address
Purchased Via (check one)
Date of Purchase
In Store
MONTH
Application (check one)
DAY
Online
YEAR
Commercial
(professional use)
Non-commercial
(private, homeowner use)
Rental
(for-hire use)
23
1. Go to: powerequipment.honda.com to register your unit.
2. Click on Product Registration.
3. Complete the required information and click Submit.
It’s that simple!
NO POSTAGE
NECESSARY
IF MAILED
IN THE
UNITED STATES
Product Registration
BUSINESS REPLY MAIL
FIRST-CLASS MAIL
PERMIT NO. 117
ALPHARETTA GA
POSTAGE WILL BE PAID BY ADDRESSEE
Power Equipment Division
American Honda Motor Co. Inc.
4900 Marconi Dr
Alpharetta GA 30005-9956
24
EM5
K5
HPE.2014.08
PRINTED IN U.S.A.