TOA Audio Catalog

TOA Audio Catalog
s
ne
ho
M
icr
op
TOA Electronics Full Line Audio Catalog 2016
s
t,
m
e
en hers
t
s
m
t
Sy
uip d O
s
q
E an
les
nt dio
u
ire
o u
W
k Mork A
c
Ra et w
N
ers
Mix
s
lifier
Amp
rs
Speake
Conference System
Mega
phone
s
Inte
rcom
Se
Re
fe
cu
re
n
rity
ce
&S
afe
ty
TOA Audio Catalog
We Supply Sound,
Not Equipment.
That’s Our Corporate
Philosophy.
Since being founded in 1934, as a manufacturer of
commercial and professional audio equipment and
security equipment, we have exported our products from Kobe to more than 100 other countries
throughout the world.
In every company within the TOA group, which
consists of the main company and 19 subsidiaries,
we utilize the technical expertise and know-how
that we have accumulated throughout the years in
every aspect of production, from product planning
manand development right through to sales and man
agement.
We are constantly improving our technological
capabilities in areas such as acoustics, graphics
and networks, and developing innovative products
in order to provide customers with the ultimate in
good sound and peace of mind to help make their
lives more comfortable.
S O U N D
&
Basic Management Policy (Three Confidence)
• Total confidence of our customers in the use of all products.
• Total confidence of our associates in all business transactions.
• Total confidence of our employees in all their effort.
TOA’s Environmental Principles
TOA recognizes preservation of the Earth’s environment
as an important aspect of doing business in the world
today. Our staff as a whole remains actively committed to
pursuing all corporate activities in ways that give strong
consideration to environmental protection.
Declaration of Social Contribution
TOA voluntarily conducts activities to resolve diverse
social issues and contribute to society in general as a
“good corporate citizen” trusted by society. We aim to
grow together with society and become viewed by society as an “indispensable company,” by effectively using
company resources and conducting original activities
with a strong awareness of our relationship with “sound
and video,” a business field we specialize in.
01
TOA Audio Catalog
Microphones
Wireless Systems
Rack Mount Equipment,
Network Audio and Others
Planning and Design
Carried Out in Japan
Thorough Proving of Product Design and
Production Processes
Mixers
The basis of our quality assurance activities is the
product planning and design that is carried out pri-marily in Japan in response to market needs and in
compliance with ISO9001:14001 standards. Our
dedicated professional staff inspect products at
every stage of the production process using their
years of experience and their high levels of technological expertise.
Amplifiers
Quality Control by TOA HQ
Speakers
TOA production plants both within Japan and overseas are part of TOA
Group. Numerous technicians from Japan are sent to our overseas production plants where they use state-of-the-art equipment to produce products under the same stringent quality control system as is used in our production facilities in Japan. Furthermore, twice a year, staff from our Quality Control Division visit overseas production facilities to carry out inspections and ensure that quality standards are being maintained.
Conference System
C O M M U N I C A T I O N
Megaphones
Intercom
Security & Safety
CONTENTS
Speakers ........................................ 42
Wireless Systems ........................... 05
Conference System ........................ 59
Rack Mount Equipment, Network
Audio and Others............................ 15
Megaphones ................................... 62
Mixers............................................. 18
Security & Safety............................ 77
Amplifiers....................................... 25
Reference ....................................... 83
Reference
Microphones................................... 03
Intercom ......................................... 63
TOA Audio Catalog
02
Microphones
Microphones
Wireless
Systems
Dynamic Microphones
Rack Mount Equipment,
Network Audio and Others
vUnidirectional Microphone
vUnidirectional Microphone
DM-1200
DM-1300
• Rigid diecast zinc microphone body
• Switching and handling noise suppression
• 10 m phone plug cable supplied with unit
• Balanced output for long distance connection
• Dynamic hand-held microphone for speech use
• Microphone holder provided as standard accessory
• Rigid diecast zinc microphone body
• Switching and handling noise suppression
• 10 m phone plug cable supplied with unit
• Balanced output for long distance connection
• Microphone holder provided as standard accessory
• Dynamic hand-held microphone for vocal/speech use
Mixers
DM-1200
Type
DM-1300
Moving coil microphone (Dynamic microphone)
Directivity
Unidirectional: Cardioid
Rated Impedance
600 Ω, balanced
Amplifiers
Rated Sensitivity
–55 dB (1k Hz 0 dB = 1 V/Pa)
–54 dB (1k Hz 0 dB = 1 V/Pa)
Frequency Response
50 Hz – 12 kHz
70 Hz – 15 kHz
Weight
265 g (without connection cable)
245 g (without connection cable)
Dimensions (W x H x D)
39.5 x 163 mm (1.6” x 6.4”)
51 x 170 mm (2” x 6.7”)
Talk switch
Short-off type, slide on/off switch
Speakers
Finish
Body: Die cast zinc, painted metallic gray
Head: Die cast aluminum, zinc plated steel
wire, painted metallic gray
Body: Die cast zinc, painted metallic gray
Head: Aluminum, zinc plated steel wire,
painted metallic gray
Standard accessory
Microphone holder
(W 5/16”, W 5/8”, W3/8”)
Microphone holder (W 5/16”)
Array Microphone
Conference
Systesm
The Real-time Steering Array Microphone System has achieved the unique function of detecting the sound source location and steering its angle
automatically in real-time to capture the targeted sound more efficiently. In addition, the special, user-friendly app and firmware allow the user to
monitor the status of the sound source tracking and make changes to its setting parameters with an iPad or a PC. With this technology, the presenter
would no longer need to be “microphone-conscious” to get a uniform sound level while speaking and moving.
Megaphones
AM-1BSET (Black)
AM-1WSET (White)
Intercom
• Detect sound source location and steer its beam angle automatically to focus on that sound source
• The dedicated user-friendly GUI is available as a free app for iPadTM and a firmware for PC browsing.
It allows monitoring and setting the following key items.
System
• Real time monitoring:
• Detection of sound source location
• Signal level of 8 individual microphone elements
• Parameter settings:
• Tracking range (Horizontal angle and distance), sensitivity, speed
• Gain compensation ON/OFF, Distance adjustment threshold
GUI
• Duration (Time monitoring of sound source footprint)
• Disabling of MUTE switch function on the microphone
• Output gain level adjustment
• Mute ON/OFF operation
Security
& Safety
Array Microphone Accessories
Reference
vWall/Ceiling Mount Bracket
WB-AM1BWC AM (Black)
WB-AM1WWC AM (White)
3
TOA Electronics, Inc.
Configuration
Microphones
EM-600
EM-700
• Electret condenser microphone for conference room
recording and security monitoring
• Wide frequency range (30Hz-20kHz) provides well-balanced sound with clarity and a satisfying tonal response
• Unobtrusive design allows easy flush-mounting in walls,
ceilings, and desktops
• Optimized to deliver best performance when used on a
desk or attached to a ceiling
• A 50 Hz low-cut filter reduces intrusive noise, such as
air conditioner rumble or door opening/closing
• Two rubber isolation rings provided as an accessory
serving to reduce vibration
• Electret condenser microphone for speech and recording
applications
• Design, optimized to deliver best performance when used
on a desk
• Slim, stylish design suits interior decor
• Rejection of undesirable off-axis sound minimizes possible
feedback
• Low-cut filter switch prevents interference from ambient
noise from being picked up
• Wide frequency range of 35 to 20 kHz provides well-balanced sound with clarity and a satisfying tonal response
vGooseneck Microphone
vMicrophone Desk Stand
EM-800
ST-800
• Electret condenser microphone for such speech
applications as meetings, lectures, and religious
services
• Excellent high-frequency response of 60 to 20k Hz
delivers clear output
• High sensitivity (-35dB) provides a satisfying tonal
response
• Gooseneck with two adjustment points allows more
flexible microphone positioning angles
• Rejection of undesirable off-axis sound minimizes
possible feedback
• Pictured with microphone
EM-800 and stand ST-800
Amplifiers
120, balanced
-36 dB (1k Hz 0 db = 1 V/Pa)
-33 dB (1k Hz 0 db = 1 V/Pa)
-35 dB (1k Hz 0 db = 1 V/Pa)
9-52V DC
30 Hz - 20kHz
35 Hz - 20kHz
60 Hz - 20kHz
XLR-3-12 equivalent
Finish
Body: Steel, white, semi-gloss, paint
Head: Zinc-plated steel wire, white,
semi-gloss, paint
Body: Die-cast, aluminum, black,
mat finish, paint
Punch net: Surface-treated steel
plate, black, mat finish, paint
Body, shaft: Copper alloy, black
semi-gloss, paint
Dimensions
28 x 68mm (1.1” x 2.7”)
83 (W) x 23 (H) x 83 (D)mm (3.2”
x 0.9” x 3.2”) (core excluded)
12 x 420mm (0.5” x 16.5”)
Weight
85g
290g
135g
Accessory
Rubber Isolation Ring x 2, M20 Nut x 1
-
Windscreen x 1
Megaphones
Output Connector
Conference
Systesm
Phantom Power
Frequency Response
EM-800
Cardioid
Rated Impedance
Rated Sensitivity
Speakers
EM-700
Omnidirectional
Intercom
Paging Microphones
PM-660U
PM-222U
• Dynamic paging microphone without plug
• Large talk switch with locking lever
• Extra switch contact for mute or relay control
• Fitted with 2.5m, 2-core shielded cable without plug
• Noise-canceling for high noise environments
• Lock-on push-to-talk switch for continuous use
• Pig-tail cord with external control contacts and conductors
• Mounting sleeve included for wall-mounting
PM-660U
Rated Impedance
Rated Sensitivity
PM-222U
600, balanced
-58 dB (1kHz, 0 dB = 1 V/Pa)
Frequency Response
-47 dB (1kHz, 0 dB = 1 V/Pa)
100 Hz to 10kHz
Remote Switch
Leaf spring contact (interlocked with talk switch), 30 V DC,
under 500 mA
Make contact (linked with talk switch) 30 V DC, 500
mA or less
Finish
Head: Zinc plated steel wire, gray, paint Body: ABS resin, gray
ABS resin, gray
Dimensions
100 (W) x 215 (H) x 150 (D) mm (3.94” x 8.46” x 5.91”)
44 (W) x 160 (H) x 38 (D)mm (1.73” x 6.29” x 1.49”)
Weight
440g (0.97 lbs) (cable excluded)
200g (0.44 lbs)
Reference
Model
Security
& Safety
EM-600
Directivity
Wireless
Systems
vUnidirectional Microphone
Mixers
vFlush-Mount Boundary Microphone
Rack Mount Equipment,
Network Audio and Others
Condenser Microphones
TOA Electronics, Inc. 4
Microphones
Wireless Systems
Wireless
Systems
UHF Wireless Solution
S5.3 UHF Professional Wireless Microphone System incorporates the latest technological advances, enabling it to satisfy the demands of a wide
range of theater and broadcast applications. The high quality audio and RF dynamics combine with true diversity operation to provide a system with
excellent multi-channel capability, enabling up to 12 channels to operate simultaneously without interference. Microphone size and running costs
have been reduced, thanks to single AA cell battery operation, providing over 10 hours of continuous use.
Rack Mount Equipment,
Network Audio and Others
Frequency Band Selection: E2: 668-698MHz; F2: 636-668MHz; G7: 606-636MHz; H2: 576-606MHz, UHF
[Note: for part numbers with frequency bands and ordering information see page 13/14.]
vReceiver
Model
S5.3-RX
S5.3-RX
Diversity System
Space diversity (true diversity)
Audio Output
Line: -22 dB/Mic: 62 dB
Line/Mic selectable, 600Ω, balanced, KLR-3-32 type connector
Headphone: max, 100 mW 16Ω, unbalanced, phone jack
-23 dB, 600Ω, unbalanced, phone jack
Receiving Sensitivity
0 dB V or less (12 dB SINAD)
Squelch Sensitivity
6 - 63 dB V variable
Mixers
• True diversity operation
• Up to 640 selectable frequencies
(12 Simultaneous channels)
• USB based computer monitoring
• Frequency scan function
• Integral triple tone grip/noise and signal strength mute circuit for
protectionagainst external interference
• Simple programming of transmitter with built-in Infraed data link
• Clear and intuitive LCD display
• Professional metal enclosure
Amplifiers
Squelch System
Using together of noise SQ, carrier SQ and tone SQ
Indicator
LCD, Power lamp, Mute lamp, ANT A/B lamp
S/N Ratio
110 dB or more (A-weight)
Harmonic Distortion
1% or less (typical)
Frequency Response
50 Hz - 20 kHz, ±3 dB
Dimensions
210 (W) x 46 (H) x 210 (D) mm (8.3” x 1.8” x 8.3”) (excluding antenna)
Weight
1.3kg (2.87lbs)
Speakers
Conference
Systesm
vHandheld Microphone
vTransmitters
S5.3-HDX (Dynamic)
S5.3-HCX (Condenser)
S5.3-BTX (Bodypack)
S5.3-B (Beltpack)
• Simple programming of transmitter with built-in Infra-red data link
• Frequency & Power lock facility
• Single AA operation of transmitters with battery life of over 10 hours
• Integral antenna
• Clear and intuitive LCD display
• Color coded ID band
• Professional metal enclosure
• Credit card size beltpack
• Simple programming of transmitter with built-in Infra-red data link
• Frequency & Power lock facility
• Clear and intuitive LCD display
• Single AA operation of transmitters with battery life of over 10 hours
• Detachable antenna
• Professional metal enclosure
• Microphone sold separately
Megaphones
S5.3-HDX
S5.3-HCX
RF Carrier Power
S5.3-BTX
Less than 50mW (Factory preset 10mW ERP)
Modulation System
-
-
Maximum Input Level
146 dB SPL (microphone sensitivity: Gain “0”)
142 dB SPL (microphone sensitivity: Gain “0”)
120 dB SPL (microphone sensitivity: Gain “0”)
Audio Frequency Response
60 Hz - 20 kHz
90 Hz - 20 kHz
-
Dynamic Range
Intercom
Audio Inout Connector
PLL synthesizer
110 dB or more
-
-
-
Battery
TA-4 (Mini-XLR 4 pins)
LR6 (AA)
Battery Life
10 hours (Alkaline)
Indicator
LCD display, Power lamp
Dimensions
50 x 247.9 mm (2” x 9.8”)
50 x 232.9 mm (2” x 9.2”)
55 (W) x 80 (H) x 22 (D) mm (2.1 x 3.1” x 0.9”)
Weight
380g (13.4oz) (with battery)
300g (10.6oz) (with battery)
140g (4.9oz) (with battery)
Security
& Safety
Trantec S5.3 Series Kits
vLavaliere Microphone Set
vDynamic Handheld Mic Set
S5.3-HD S5.3-RX+S5.3-HDX Set
Reference
vCondenser Handheld Mic Set
S5.3-L S5.3-RX+S5.3-BTX+Lavaliere Mic Set
S5.3-HC S5.3-RX+S5.3-HCX Set
5
TOA Electronics, Inc.
For S5.3 Series optional microphone/accessories, see page 8. For Ordering Information see pages 13 and 14.
Microphones
TRANTEC Wireless Microphone Systems S5 and S4 Series
S4.16-RX
S4.16-RX
• 16 selectable frequencies
• Up to 12 simultaneous channels
• Fully synthesized PLL quartz tuning technology
• Receiver LED’s show AF Peak level, RF Level, and Diversity
Channel A or B
• Diversity operation with detachable antenna
• Professional metal enclosure
• 19” rack mount option for one or two receivers
*1 0dB = 0.775 V
Audio Output
Balanced output: +16 dB(*1)(max), 600 Ω, balanced, XLR-3-31 type
connector
Unbalanced output: +10 dB(*1)(max), 600 Ω, unbalanced, phone jack
Receiving Sensitivity
Over 90 dB, S/N ratio (20 dB V input, 40 kHz deviation)
Squelch Sensitivity
18 - 40 dBµV variable
Squelch System
Using together of noise SQ, carrier SQ and tone SQ
Indicator
ANT A/B, Audio (peak), RF level, Power
S/N Ratio
Over 95 dB (A-weight, unbalanced output)
Harmonic Distortion
Under 1% (typical)
Frequency Response
60 - 16,000 Hz, ±3 dB
Dimensions
214(W) x 35(H) x 100.5(D) mm (8.4”x1.4”x4”) (excluding antenna)
Weight
580g (20.5oz)
vHandheld Microphone
vBeltpack Transmitter
S4.16-HDX (Dynamic)
S4.16-BTX
• 16 selectable frequencies
• Fully synthesized PLL quartz tuning technology
• Detachable antenna
• Single 9V transmitter battery life of approx. 10 hours
• 16 selectable frequencies
• Fully synthesized PLL quartz tuning technology
• Detachable antenna
• Locking 3.5mm jack
• Integral switch for selection between instrument and microphone
• Single 9V transmitter battery life of approx. 10 hours
• Microphone sold separately
S4.16-HDX
RF Carrier Power
Max. 10 mW
-
3.5 mini jack
Battery
6LR61 (PP3 9V)
Battery Life
10 hours (Alkaline)
Indicator
Battery Status LED
Dimensions
50 x 270 mm (2” x 10.6”)
62 (W) x 102 (H) x 31.5 (D) mm (2.4” x 4” x 1.2”) (excluding antenna)
Weight
220g (7.8oz)
90g (3.2oz)
Trantec S4.16 Series Kits
vLavaliere Microphone Set
S4.16-H S4.16-RX+S4.16-HDX Set
S4.16-L S4.16-RX+S4.16-BTX+Lavaliere Mic Set
For S5.3 Series optional microphone/accessories, see page 8. For Ordering Information see pages 13 and 14.
TOA Electronics, Inc. 6
Reference
Security
& Safety
vDynamic Handheld Mic Set
Megaphones
PLL Synthesizer
Intercom
Modulation System
Mic Input Connector
S4.16-BTX
Rack Mount Equipment,
Network Audio and Others
vReceiver
Mixers
[Note: for part numbers with frequency bands and ordering information see page 13/14.]
Amplifiers
Frequency Band Selection: E2: 668-698MHz; F2: 636-668MHz, UHF
Speakers
Multichannel wireless simply does not get any easier. The S4.16 is 16 channels of tough, reliable quality that is priced to suit the tightest of budgets.
This multifunction system is optimized for use with handheld, lapel mic and a range of headsets – or switch to use with a musical instrument. A
single 9V battery gives approximately 10 hours of quality performance with a range of up to 100 meters.
Conference
Systesm
UHF Wireless Solution
Wireless
Systems
The Trantec S5 and S4 Series is synonymous with quality among vocalists, musicians and theatrical performers. Additionally, presenters and the like also enjoy the wide variety of accessories that Trantec has to offer, allowing them to meet their professional needs.
Microphones
S4.4 Series Wireless Starter Pack
Wireless
Systems
Trantec S4.4 is a function-packed system designed to launch you into the world of wireless. Tough, reliable and compact, this multi-function system
is optimized for use with handheld, lapel mic and a range of headsets – or switch to use with a musical instrument. Not only does the S4.4 come
with a bargain basement price tag, it is also extremely economical to run. A single 9V battery will give you approximately 10 hours of quality performance with a range of up to 100 meters.
Frequency Band Selection: E2: 668-698MHz; G7: 606-636MHz, UHF
[Note: for part numbers with frequency bands and ordering information see page 13/14.]
Rack Mount Equipment,
Network Audio and Others
vReceiver
S4.4-RX
S4.4-RX
Mixers
• Four switchable frequencies
• Fully synthesized PLL quartz tuning technology
• Receiver LED’s show AF Peak level, RF Level, and Diversity
Channel A or B
• Professional metal enclosure
• 19” rack mount option for one or two receivers
*1 0dB = 0.775 V
Audio Output
Balanced output: +16 dB(*1)(max), 600 Ω, balanced, XLR-3-31 type
connector
Unbalanced output: +10 dB(*1)(max), 600 Ω, unbalanced, phone jack
Receiving Sensitivity
Over 90 dB, S/N ratio (20 dB V input, 40 kHz deviation)
Squelch Sensitivity
18 - 40 dBµV variable
Indicator
ANT A/B, Audio (peak), RF level, Power
S/N Ratio
Over 95 dB (A-weight, unbalanced output)
Harmonic Distortion
1% or less (typical)
Frequency Response
100 - 15,000 Hz, ±3 dB
Dimensions
214 (W) x 35 (H) x 100.5 (D) mm (8.4” x 1.4” x 4”) (excluding antenna)
Weight
580g (20.5oz)
Amplifiers
Speakers
vHandheld Microphone
vBodypack Transmitters
S4.4-HDX (Dynamic)
S4.4-BTX
• Four switchable licence-free frequencies
• Fully synthesized PLL quartz tuning technology
• Detachable antenna
• Single 9V transmitter battery life of approx. 10 hours
• Four switchable free frequencies
• Fully synthesized PLL quartz tuning technology
• Detachable antenna
• Locking 3.5mm jack
• Integral switch for selection between instrument and microphone
• Single 9V transmitter battery life of approx. 10 hours
• Microphone sold separately
S4.4-HDX
Conference
Systesm
RF Carrier Power
Max. 10 mW
Modulation System
Mic Input Connector
S4.4-BTX
PLL Synthesizer
-
3.5 mini jack
Battery
6LR61 (PP3 9V)
Battery Life
10 hours (Alkaline)
Indicator
Battery Status LED
Megaphones
Dimensions
50 x 270 mm (2” x 10.6”)
62 (W) x 102 (H) x 31.5 (D) mm (2.4” x 4” x 1.2”) (excluding antenna)
Weight
220g (7.8oz)
90g (3.2oz)
Trantec S4.4 Series Kits
Intercom
vDynamic Handheld Mic Set
vLavaliere Microphone Set
S4.4-H S4.4-RX+S4.4-HDX Set
S4.4-L S4.4-RX+S4.4-BTX+Lavaliere Mic Set
Security
& Safety
S5.3 & S4.16/S4.4 Optional Microphones
vLavaliere Microphone
MIC-X2 for S5 Series
vLapel Microphone for S4 Body-Pack
Transmitter, 1/8” plug
vHeadworn Microphone
vLavaliere Microphone
MIC-LP2
MIC-XEM77-P for S5 Series
*Q-EM77 available for S4.4 & S4.16
MIC-X212-P-R (Beige)
MIC-X212-B-R (Black)
Reference
NO
IMAGE
for S5 Series
For S5.3 Series optional microphone/accessories, see page 8. For Ordering Information see pages 13 and 14.
7
TOA Electronics, Inc.
Microphones
vDirectional Antenna
v19” Rack tray for two receivers
YW-7000 G
YW-7570
ACC-S4.16RK for S4.16 Series
vInstrument Cable
vRack Mounting Bracket
vRack Mounting Bracket
vPouch for S5 Body-Pack Transmitter
LD-X-JAC
ACC-S5RX-MB1 for single S5 tuner
ACC-S5RX-MB2 for two S5 tuners
ACC-S5-POUCH
NO
IMAGE
Infrared Wireless Classroom System (sold as IR-802PA)
Wireless
Systems
vAntenna Booster
YW-4500
Rack Mount Equipment,
Network Audio and Others
vWall Mount Antenna
Mixers
S5.3 & S4.16/S4.4 Series Accessories
vInfrared Wireless Tuner
IR-802T
Approx.15m (In an unobstructed space)
Input Sensitivity
Adjustment
Adjustment range: 2 levels (High, Low)
Microphone Unit
Unidirectional electret condenser microphone
Frequency Response
100 Hz – 12 kHz
Preemphasis
300 μs
Input
External microphone input (ø3.5 monaural mini jack)
Battery Operation Time
Approx. 8 hours (one piece of IR-200BT-2)
Finish
Control Section: ABS resin, white/
Filter Section: Polycarbonate, optical cut filter
54 (W) x 109 (H) x 27 (D)mm / 2.1 (W) x 4.3 (H) x 1.1 (D)in
Weight
100g / 3.5oz (with battery and strap)
Power Source
AC mains, 50/60 Hz (supplied AC adapter must be used)
Accessories
Neck strap x 1
Receiving Frequency
Teacher (Channel A): 3.100 MHz Student (Channel B): 3.350 MHz
Receiver Sensitivity
50 dB or more, Signal-to-noise ratio
(40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation)
S/N Ratio
Tuner: 60 dB or more (60 dBμV input, 1 kHz modulation,
±4.8 kHz deviation, A-weighted, Equalization: Centered)
AUX: 75 dB or more (A-weighted, Equalization: Centered)
Input AUX PC:
AUX DVD/TV:
AUX MP3:
Mute:
line, -10 dB*, 10 kΩ, unbalanced, stereo mini jack (internal mixing)
line, -10 dB*, 10 kΩ, unbalanced, 2P RCA jack (internal mixing)
line, -10 dB*, 10 kΩ, unbalanced, stereo mini jack (internal mixing)
25 V line signals of telephone paging from a school intercom system
Power Source
24 V DC (supplied from IR-802T)
Output
LD (Assistive Listening Device): line, -10 dB*, 10 kΩ, unbalanced,
monaural mini jack
Speaker: RJ45 (dedicated terminal for IR-820SP connection)
Rated Output
20 W
Equalization
High: ±10 dB at 10 kHz/Mid: ±10 dB at 1.3 kHz/Low: ±10 dB at 100 Hz
Frequency Response
100 Hz – 20 kHz (-10 dB) at installation in 1/2 free sound field
Mute Function
Muted by 25 V line signals
Amplification System
Class D
Dimensions
210 (W) × 46 (H) x 312 (D) mm / 8.3 (W) x 1.8 (H) x 12.3 (D) in
Speaker Component
12 cm (4.72”) cone-type
Weight
1.8 kg (4 lbs)
Infrared Wireless
Receiver
Wavelength
Carrier Frequency
Megaphones
Dimensions
IR-802T
Speakers
IR-310BC
typ.250 mA (1.2 V)
Infrared Emitter
Transmission Distance
Conference
Systesm
vBattery Charger
Current Consumption
vInfrared Speaker
IR-820SP
IR-820SP
(Measured by installing the unit in the center of a ceiling.)
Reception Angle
870 nm
Teacher (Channel A) : 3.100 MHz
Student (Channel B) : 3.350 MHz
360° (Horizontal)
Connection Terminal
RJ-45
Connection Cable
CAT-5 UTP
Operating Temperature
-10°C to 50°C
Dimensions
320 × 205 (D) mm / 12.6 x 8.1 (D) in
Weight
3.4 kg (7.5 lbs)
TOA Electronics, Inc. 8
Security
& Safety
• Usable as hands-free or hand-held microphone
• Lightweight body with unobtrusive styling
• 8-hour operation with single AA battery
• Microphone sensitivity adjustable to suit application
• Sturdy clothing clip to prevent wobbling or rotation during hands-free use
Batteries
Reference
IR-310M
IR-310M
One piece of IR-200BT-2 rechargeable battery for the
infrared wireless microphone (option)
Intercom
vInfrared Wireless Microphone
Amplifiers
TOA’s educational microphone system offers uniform classroom-wide sound quality with a single wide-dispersion speaker which provides ample
100 m² coverage. Quick & easy installation requiring just one CAT-5 cable.
Microphones
UHF Wireless Solution
Wireless
Systems
The Series lineup consists of microphones operating on a single battery, as well as microphones and a transmitter powered by rechargeable
batteries. Battery chargers have also been added, for use with TOA-exclusive batteries. The chargers are available in different capacities, while the
transmitter is now a standalone unit, to allow users to select the type of microphone best suited to their needs. The WT-5100 receiver, a new addition
to the 5000 Series, expands the range of applications, including museums, conferences and theaters, and enhances the Series’ versatility and
usability.
Frequency Band Selection: E01: 668-698MHz; F01: 636-668MHz; G02: 606-636MHz; H01: 576-606MHz, UHF
Rack Mount Equipment,
Network Audio and Others
[Note: for part numbers with frequency bands and ordering information see page 13/14.]
WT-5800, WT-5805 and WT-5810
• Phase Locked Loop (PLL) synthesis operation
• 64 selectable channels
• Auto mixing input function
• Squelch function (carrier, noise, tone)
• Usable frequencies scanning and vacant channel search function
• Compact half-rack size body
• Compander circuitry for minimizing ambient noise
• Low-battery indicator (wireless microphone’s battery voltage becomes low)
vReceiver
WT-5800
Mixers
vReceiver
WT-5800 and WT-5805
• True diversity technology
• Two-line LCD display
• 6 points audio level meter for microphone sensitivity adjustment
WT-5805
Amplifiers
WT-5800
• Antenna distribution output
WT-5810
• TOA space diversity technology
• Balanced output (XLR connector) and phone jack output
vReceiver
WT-5810
Speakers
WT-5800
WT-5805
Power Source
Channel Selectable
Diversity System
64 channel capability (Max. 16 Simultaneous channels)
Space diversity (true diversity)
Mixing Output
16 channels
Space diversity
Conference
Systesm
MIC: –60dB*1, 600Ω, balanced, XLR-3-31 type connector
LINE: –20dB*1, 600Ω, unbalanced, phone jack
Mixing Input
–20dB*1, 10 kΩ, unbalanced, phone jack
Antenna Input
Antenna Output
WT-5810
AC mains (supplied AC-DC adapter must be used)
75Ω, BNC (phantom powering for antenna) 9V DC, 30mA (max.)
-
75Ω, BNC (Gain 0dB)
-
Receiving Sensitivity
90dB or more, S/N ratio (20dBμV input, 40kHz deviation)
Squelch Sensitivity
18 – 40dBμV variable
Megaphones
Squelch System
Using together of noise SQ, carrier SQ and tone SQ
Indicator
Audio (6 step), RF (6 step), ANT A/B, Audio (peak), battery alarm
S/N Ratio
110dB or more (A-weight, unbalanced output)
Harmonic Distortion
Intercom
Weight
104dB or more (A-weight, unbalanced output)
1% or less (typical)
Frequency Response
Dimensions
ANT A/B, Audio (peak), battery alarm
100 – 15kHz, ±3 dB
210(W) × 44(H) × 205.1(D) mm (8.3” x 1.7” x 8.1”)
206(W) × 40.6(H) × 152.7(D) mm (8.1” x 1.6” x 6”)
700 g (24.7 oz)
590 g (20.8 oz)
vReceiver
WT-4820
WT-4820
Security
& Safety
• Modular dual channel wireless receiver
• 16 selectable channel frequencies
• Antenna cascade output function (parallel connection possible for linking two
WT-4820 units)
• TOA space diversity technology
• Auto mixing input function
• Antenna distribution output
• Accept up to two WTU-4800 tuner units
• Compact half-rack size body
• External antenna input
Power Source
vReceiver Unit
WTU-4800
12 – 18 V DC
Channel Selectable
16 channels
Mixing Input
–20dB*1, 10 kΩ, unbalanced, phone jack
Antenna Input
75 Ω, BNC (phantom powering for antenna)
9 V DC, 30 mA (max.)
Antenna Output
75 Ω, BNC (Gain 0dB)
Indicator
ANT A/B, Audio (peak), Power
S/N Ratio
Over 102dB (A-weight, unbalanced output)
Reference
Harmonic Distortion
Under 1%
Frequency Response
50 – 18,000 Hz, ±3 dB
Dimensions
210(W) × 44(H) × 181(D) mm (8.3” x 1.7” x 7.1”)
Weight
770 g / 27.2 oz (without receiver unit)
For Ordering Information see pages 13 and 14.
9
TOA Electronics, Inc.
Microphones
UHF Wireless Solution
vWireless Portable Receiver
Output Level
4 mW (16Ω load, 10% distortion)
Battery
WB-2000-2 rechargeable battery (option) or
LR6/AA alkaline dry cell battery
Battery Life
16 h (when the WB-2000-2 rechargeable battery
is used)
15 h (when the alkaline battery is used)
Dimensions
62 (W) × 163.6 (H) × 32.5 (D)mm (2.4” x 6.4” x 1.3”)
Weight
125 g / 4.4 oz (battery included)
vHandheld Microphone
vHandheld Microphone
WM-5225
WM-5265
• Electret condenser microphone unit: Unidirectional
• 64 selectable channels
• ON/OFF switch prevents the microphone from rolling.
• WB-2000 rechargeable battery or single AA battery operation for compact and lightweight body
• Built-in antenna
• Dynamic microphone unit: Unidirectional
• 64 selectable channels
• ON/OFF switch prevents the microphone from rolling
• WB-2000 rechargeable battery or single AA battery operation for compact and lightweight body
• Built-in antenna
vHandheld Microphone
vBeltpack Transmitter
WM-5270
WM-5325
• Dynamic microphone unit: Unidirectional
• 64 selectable channels
• Rolling stopper prevents the microphone from rolling
• Single AA battery operation for more compact and light weight body
• Built-in antenna
• 64 selectable channels
• Maximum input level: -14 dB to -29 dB
• Built-in circuitry minimizes ambient noise effects
• Connector for ø3.5 mini-plugs
• Built-in antenna
• Microphone sold separately
• WB-2000 rechargeable battery or single AA battery operation for compact and lightweight body
WM-5270
WM-5265
WM-5225
Oscillator
PLL synthesizer
Audio Input Connector
Audio Frequency
Response
132 dB SPL
-
126 dB SPL
-
-
80Hz – 15kHz
Dynamic Range (AF
Circuit)
-14dB to -29dB*1
(Audio level control: Min. to Max.)
100Hz – 15kHz
95dB or more (with WT-5800)
Battery
AA alkaline dry cell battery
Battery Life
Approx. 10h
(when the alkaline battery is used)
3.5mm (0.14”) mini plug
-
Intercom
142 dB SPL
WB-2000 (Ni-MH battery) or LR6(AA)
Approx. 13h (when the WB-2000 rechargeable battery is used)
Approx. 10h (when the alkaline battery is used))
Indicator
Power/Battery lamps
Dimensions
48 × 244 mm (1.9” x 9.6”)
50 × 229 mm (2” x 9”)
43.6 × 231.5 mm (1.7” x 9.1”)
62(W)×102.5(H)×23(D)mm (2.4”x4”x0.9”)
Weight
340g / 12oz (with battery)
205g / 7.2oz (with battery)
180g / 6.3oz (with battery)
90g / 3.2oz (with battery)
Reference
*1 0dB = 1 V
Security
& Safety
Maximum Input
Level
WM-5325
Less than 50mW (Factory preset 10mW ERP)
Megaphones
RF Carrier Power
Rack Mount Equipment,
Network Audio and Others
200 Hz – 5 kHz (Portable transmitter to Portable
receiver)
Mixers
Frequency Response
Amplifiers
*When using an earphone not made by TOA, use the one with a ø3.5mm plug and impedance of over 16Ω.
Better than 60 dB Signal to Noise ratio
(20 dBμV input, ±40 kHz deviation)
Speakers
• Commercial earphones can also be used* (ø3.5 mm, impedance:
over 16Ω)
• Allows up to 16 different frequencies to be received by selection
• An optimized PLL-synthesizer minimizes the oscillation frequency
drift resulting from the ambient temperature or voltage fluctuation.
• WB-2000 rechargeable battery or single AA battery operation for
compact and lightweight body
vRechargeable Battery
• Built-in antenna
WB-2000-2
1.5 V DC (Battery)
Receiving Sensitivity
Conference
Systesm
WT-5100
Wireless
Systems
WT-5100
Power Source
For Ordering Information see pages 13 and 14.
TOA Electronics, Inc. 10
Microphones
UHF Wireless Solution
Wireless
Systems
5000 Series Optional Microphones
vSingle Ear Microphone
Q-EM-77
Rack Mount Equipment,
Network Audio and Others
• Unidirectional electret condenser microphone
• Ideal for sports applications
• Omnidirectional electret condenser
Mixers
vLavaliere Microphone
YP-M5300
vHeadworn Microphone
WH-4000A
• Unidirectional electret condenser microphone
• Unidirectional electret condenser microphone element
• Connector for 3.5 mini-plug
microphone element
• Compatible with WM-5325
• 3.5mm connector
vEarphone
YP-E5000
vHeadworn Microphone
WH-4000H
vLavaliere Microphone
YP-M5300
• Omidirectional electret condenser microphone element
• Connector for 3.5 mini-plug
5000 Series Kits
Amplifiers
vHandheld mic. (unidirectional) set
vDynamic handheld mic. (unidirectional) set
vLavaliere mic. (unidirectional) with beltpack
WS-5225
WS-5265
WS-5325U WM-5325+YP-M5300+WT-5810 Set
WM-5225+WT-5810 Set
WM-5265+WT-5810 Set
Speakers
vHeadworn mic. with beltpack set
vLavaliere mic. (omnidirectional) with beltpack
WS-5325H WM-5325+WH-4000H+WT-5810 Set
WS-5325M WM-5325+YP-M5310+WT-5810 Set
Conference
Systesm
5000 Series Accessories
vAC Adapter
vBattery Charger
vBattery Charger
AD-5000-2 US
AD-5000-6 US
BC-5000-2
BC-5000-6
vRechargeable Battery
vWaist Pouch
vWindscreen
vWall Mount Antenna
vRack Mount Bracket
WB-2000-2
WH-4000P
WH-4000S
YW-4500
MB-15B
vAC Adapter
vBattery Charger
Megaphones
BC-5000-6
Intercom
Security
& Safety
vRack Mount Bracket
vRack Mount Bracket
vAntenna Distributor
vAntenna
MB-WT3
MB-WT4
WD-4800 US
XWT-4800ANT
NO
IMAGE
Reference
(Please note that the power supplies/AC Adapter (AD-5000-6, AD-5000-2) for the 5000 Series UHF Wireless Battery Chargers (BC-5000-12; BC-5000-6; BC-5000-2) are sold separately)
For Ordering Information see pages 13 and 14.
11
TOA Electronics, Inc.
Microphones
vInfrared Wireless Tuner
vInfrared Wireless Distributor
IR-702T US
IR-700D US
• Built-in 2-channel fixed-frequency tuner
• Up to 4 infrared light receivers per unit
• Equipped with signal reception light and knob for microphone
volume control
• Two line outputs, one with a MIX output switch allowing output of
mixed voice from channels A and B
• Equipped with 4 receiver mixingoutputs and 2 distributor outputs
• By using the IR-700D in conjunctionwith IR-702T and YW-1022/
YW-1024, a system with up to 16 infrared receivers is configurable
IR-200BT-2
AC mains 50/60Hz (supplied from the accessory AC adaptor)
S/N ratio over 50dB (40dBμ V input, 1 kHz modulation, ±4.8 kHz deviation)
75 Ω, BNC jack × 2 (Infrared wireless receiver’s power source: 24V DC, max. 220mA in total of 2 terminals)
Output
Channel A and B: –10 dB* (±4.8kHz deviation, at volume level max.), 600 Ω, electronically balanced, 3 pole phone jack Note: Channel A switchable to mixer output
Frequency Response
100Hz – 12kHz
Dimensions
210 (W) × 44 (H) × 210.9 (D) mm (8.2” x 1.7” x 8.3”)
Weight
630g / 22.2oz (unit only)
Amplifiers
Infrared Receiver Input
vInfrared Wireless Microphone
vInfrared Wireless Microphone
IR-200M Y
IR-300M Y
• Lightweight
• Two selectable channels
• Antibacterial treatment
• Low-battery indicator
• Stable voice transmission
• Electret condenser microphone unit
• Infrared light emission intensity adjustable
• Intelligent positioning of the emitter avoids drop-outs through
user’s handling
• 2 selectable channels
• Antibacterial treatment
• Low-battery indicator
• Ready-to-wear design with neck strap
• Built-in electret condenser microphone
• Infrared light emission intensity adjustable
• An external MIC input level adjustable
• Connection of optional external microphone possible
• Intelligent positioning of the emitter avoids drop-outs through user’s handling
vInfrared Wireless Microphone
vBattery Charger
IR-310BC
IR-200BC US
• Usable as hands-free or hand-held microphone
• Lightweight body with unobtrusive styling
• 8-hour operation with single AA battery
• Microphone sensitivity adjustable to suit
application
• Sturdy clothing clip to prevent wobbling or
rotation during hands-free use
vCeiling-mount Receiver
vWall-mount Receiver
IR-500R Y
IR-510R Y
IR-520R Y
• Reception area approx. 15m
• Adjustable reception angle
• Reception radius approx. 8m
• Reception area approx. 15m
Reference
Security
& Safety
vInfrared Wireless Microphone
Intercom
Megaphones
IR-310M
vBattery Charger
Speakers
Channel A: 3.100MHz/Channel B: 3.350MHz
Receiver Sensitivity
Conference
Systesm
Receiving Frequency
Mixers
vRechargable Battery
IR-702T US
Power Source
Wireless
Systems
TOA’s Infrared Wireless Microphone System incorporates a range of conference and communication enhancing features that will appeal to users
who want confidentiality as well as interference-free communication. Because the microphones use infrared signals, sensitive matters being discussed in a meeting room won’t leave the room, and the wireless microphones can be used in several adjacent classrooms simultaneously without
interference.
Rack Mount Equipment,
Network Audio and Others
Infrared Wireless Microphone System
TOA Electronics, Inc. 12
Microphones
Wireless Microphone Ordering Information
Wireless
Systems
Model / Description
E Band: 668 - 698 MHz
F Band: 636 - 668 MHz
G Band: 606 - 636 MHz
H Band: 576 - 606 MHz
Part Number
Part Number
Part Number
Part Number
TRANTEC S5.3 Series 12 Channel Wireless Solution
KITS
Rack Mount Equipment,
Network Audio and Others
S5.3HD - Handheld Dynamic Kit
S5.3-HD-E2USQ
S5.3-HD-F2USQ
S5.3-HD-G7USQ
S5.3-HD-H2USQ
S5.3HC - Handheld Condenser Kit
S5.3-HC-E2USQ
S5.3-HC-F2USQ
S5.3-HC-G7USQ
S5.3-HC-H2USQ
S5.3L - Lavaliere Kit
S5.3-L-E2US Q
S5.3-L-F2US Q
S5.3-L-G7US Q
S5.3-L-H2US Q
TOA 5000 Series 16 Channel Wireless Solution
KITS
Mixers
WS-5225 - Handheld Condenser Kit
WS-5225 E01US
WS-5225 F01US
WS-5225 G02US
WS-5225 H01US
WS-5265 - Handheld Dynamic Kit
WS-5265 E01US
WS-5265 F01US
WS-5265 G02US
WS-5265 H01US
WS-5365U - Lavaliere (uni) Kit
WS-5365U E01US
WS-5365U F01US
WS-5365U G02US
WS-5365U H01US
WS-5365M - Lavaliere (omni) Kit
WS-5365M E01US
WS-5365M F01US
WS-5365M G02US
WS-5365M H01US
WS-5365H - Headworn (uni) Kit
WS-5365H E01US
WS-5365H F01US
WS-5365H G02US
WS-5365H H01US
WT-5800 - Receiver
WT-5800 E01US
WT-5800 F01US
WT-5800 G02US
WT-5800 H01US
WT-5805 - Receiver
WT-5805 E01US
WT-5805 F01US
WT-5805 G02US
WT-5805 H01US
WT-5810 - Receiver
WT-5810 E01US
WT-5810 F01US
WT-5810 G02US
WT-5810 H01US
WTU-4800 - Receiver Unit
WTU-4800 E01
WTU-4800 F01
WTU-4800 G02
WTU-4800 H01
WM-5270 - Handheld Dynamic Mic
WM-5270 E01
WM-5270 F01
WM-5270 G02
WM-5270 H01
WM-5265 - Handheld Dynamic Mic
WM-5265 E01
WM-5265 F01
WM-5265 G02
WM-5265 H01
WM-5225 - Handheld Electret Mic
WM-5225 E01
WM-5225 F01
WM-5225 G02
WM-5225 H01
WM-5325 - Belt Pack
WM-5325 E01
WM-5325 F01
WM-5325 G02
WM-5325 H01
INDIVIDUAL UNITS
Amplifiers
WT-4820 US - Receiver (add WT-4800)
Speakers
TRANTEC S4.16 Series 12 Channel Wireless Solution
KITS
S4.16H - Handheld Dynamic Kit
S4.16-H-E3-USQ
S4.16-H-G4-USQ
S4.16L - Lavaliere Kit
S4.16-L-E3-USQ
S4.16-L-G4-USQ
Conference
Systesm
TRANTEC S4.4 Series Wireless Starter Pack
KITS
S4.4H - Handheld Dynamic Kit
S4.4-H-E4-US Q
S4.4-H-G5-US Q
S4.4L - Lavaliere Kit
S4.4-L-E4-US Q
S4.4-L-G5-US Q
Megaphones
Stay up-to-date with our latest
product information by
visiting our website at
www.toaelectronics.com!
Intercom
Security
& Safety
Reference
13
TOA Electronics, Inc.
Microphones
Wireless Microphone Selection Guide
TOA 5000 Series Wireless Microphone Selection Guide
Model
Replaces
Handheld microphone, condenser, unidirectional
WM-5225
WM-5220
Handheld microphone, dynamic, unidirectional
WM-5265
Handheld microphone, dynamic, unidirectional
WM-5270
Compatible With
Handheld Wireless Microphones
Receiver: WT-5800; WT-5805; WT-5810; WT-4820
Wireless
Systems
Description
WM-5320
YP-M5310
100012769A
Headset microphone, condenser, unidirectional
WH-4000H
WM-5320H
Aerobic headset microphone, condenser, unidirectional
WH-4000A
WM-5320A
Single ear microphone, condenser, omnidirectional
Q-EM-77
Transmitter: WM-5325
Receiver: WT-5800; WT-5805; WT-5810; WT-4820
Optional Accessories - Microphones
Microphone/Beltpack: WM-5225; WM-5265; WM-5325; AC Adapter:
AD-5000-2
Battery charger for 2 microphones (AC adapter sold separately)
BC-5000-2
Battery charger for 6 microphones (AC adapter sold separately)
BC-5000-6
Battery charger for 12 microphones (AC adapter sold separately)
BC-5000-12
Microphone/Beltpack: WM-5225; WM-5265; WM-5325
AC Adapter: AD-5000-6
AC adapter (sold separately)
AD-5000-2
Battery charger: BC-5000-2
AC adapter (sold separately)
AD-5000-6
Battery charger: BC-5000-6; BC-5000-12
Battery
WB-2000-2
Microphone/Beltpack: WM-5225; WM-5265; WM-5325
Aerobics waist pack (belt)
WH-4000P
Microphone: WH-4000A
Replacement windscreen
WH-4000S
Microphone: WH-4000A; WH-4000H
Wireless Receivers
True diversity receiver
WT-5800
Space diversity receiver
WT-5805
Space diversity receiver
WT-5810
Wireless microphone receiver
WT-4820
UHF wireless tuner module
WTU-4800
Module for WT-4820
Antenna distributor
WD-4800
Receiver: WT-5800; WT-5805; WT-4820
UHF wireless antenna
YW-4500
Receiver: WT-5800; WT-5805; WT-4820; WTU-4800
Rack mount for single receiver (1RU)
MB-WT3
Rack mount for dual receiver (1RU)
MB-WT3
Rack mount kit
MB-15B
Microphone: WM-5225; WM-5265; WM-5270; WM-5325
Optional Accessories - Receivers
Antenna distributor: WD-4800
WS-5265
Lavaliere condenser (unidirectional) kit
WS-5325U
Lavaliere condenser (omnidirectional) kit
WS-5325M
Headworn condenser (unidirectional) kit
WS-5325H
WS-5200
WS-5300
Microphone: Q-EM-77; WH-4000A; WH-4000H; YP-M5300; YP-M5310
WS-5300H
Intercom
WS-5225
Handheld dynamic kit
TRANTEC Series Wireless Microphone Selection Guide
Description
Model
Compatible With
Lavaliere microphone
MIC-X2; MIC-X212-P-R; MIC-X212-B-R
Beltpack: S5.3-BTX
Lavaliere microphone
MIC-LP2
Beltpack: S4.4-BTX
Guitar cable
LD-X-JAC
Beltpack: S5.3-BTX
Headworn microphone
MIC-XEM77; Q-EM-77; WH-4000A; WH-4000H
Beltpack: S4.4-BTX
Pouch for S5 bodypack transmitter
ACC-S5-POUCH
Beltpack: S5.3-BTX
Megaphones
Receiver: WT-5800; WT-5805; WT-4820
Wireless Microphone Kits (includes Microphone and Receiver)
Handheld condenser kit
Mixers
YP-M5300
Lavaliere microphone, condenser, omnidirectional
Wireless Microphones
Amplifiers
Lavaliere microphone, condenser, unidirectional
Microphones: WH-4000A; WH-4000H; YP-M5300; YP-M5310; Battery:
WB-2000-2; Battery Charger: BC-5000-2; BC-5000-6; BC-5000-12
Speakers
WM-5320; WM-5320A;
WM-5320H
Conference
Systesm
WM-5325
Wireless beltpack transmitter
Rack Mount Equipment,
Network Audio and Others
Beltpack Transmitter (microphone sold separately)
Security
& Safety
Optional Microphones
Optional Accessories - Receivers
YW-7000 RF
Directional antenna
YW-7570
Wall mount antenna
YW-4500
Rack mount kit
ACC-S5RX-MB1; ACC-S5RX-MB2
Antenna distributor
WD-4800
19” rack tray for 2 S4.16 series tuners
ACC-S4.16RK
Receiver: S5.3-RX; S4.4-RX
Reference
Antenna booster
Receiver: S5.3-RX
TOA Electronics, Inc. 14
Microphones
Rack Mount Equipment,
Network Audio and Others
Wireless
Systems
Equalizers
v2-Channel 2/3 Octave Graphic Equalizer
E-232 L
Rack Mount Equipment,
Network Audio and Others
• 14 filters on 2/3 octave center frequencies from 40 Hz to 16k Hz (+/- 6 or 12 dB)
• Noiseless center-detent slide controls with precision-calibrated linear scales
• Independent selection for boost and cut of 6 or 12 dB
• ±12 dB input gain control and high pass filter
• In/out peak level indicator
• Automatic bypass if power fails EQ in/out with “hardwire” bypass if power fails
• Security cover and rack-mount brackets included (1 RU)
Mixers
Multi-Channel Monitors
Amplifiers
vMonitor Panel
vMulti-Channel Monitor
MP-032B
MP-1216 US
• VU meter
• Ten input channels for monitoring high impedance speaker lines
• Internal speaker with selector switch for individual channel monitoring
• Built-in rack-mount brackets (3 RU)
• Sixteen transformer-isolated, bridging inputs for monitoring line level or
low and high impedance speaker line signals
• Separate bar graph meter for each input
• Internal speaker with selector switch for individual channel monitoring
• Two units can be linked for 32 channel monitoring using optional cable,
model YA-8
• Built-in rack-mount brackets (2 RU)
Speakers
Program Timer
vProgram Timer
TT-104B 304L
Conference
Systesm
• For timed control of external equipment and events
• Four independent outputs with 30 programmable steps per output
• Outputs features 0.5A (24V DC) five second dry contact closures
• Weekly program with pause mode for vacations/holidays
• -/+5 second per month clock accuracy with four day backup battery if power fails
Megaphones
AM/FM Tuner
vSynthesized AM/FM Tuner
DT-930 UL
Intercom
• Presets for any combination of 40 AM (monaural) and/or FM (capable of receiving stereo broadcast) stations
• Frequency synthesized digital tuning with multi-function digital display
• Automatic station scanning and manual tuning
• Automatic station storage to memory using auto-scan mode
• Direct station frequency tuning entry
• Stereo output is available
• FM dipole and AM loop antenna included
• Optional rack mount kit available (MB-15B)
Security
& Safety
Reference
15
TOA Electronics, Inc.
Microphones
Digital Message Repeaters
Wireless
Systems
vSound Repeater
EV-20RPS US
Rack Mount Equipment,
Network Audio and Others
• For paging applications with a distributed speaker system
• Front panel-mounted recording inputs (mic/line switchable)
• PC connection via USB. A CD-ROM with various chimes is included
• Pre-recorded message can be transferred via USB-interface
• Up to 4 separate message selections or announcements to a total maximum of six minutes may be recorded
• Built-in interval timer allows messages to be repeated at various time intervals (0.5 seconds up to ∞)
• 3W / 8Ω amplifier section built-in for direct speaker connection.Volume control for level adjustment of an external source
• A line input and output for connecting various program sources including CD players or dedicated BGM inputs
vSound Repeater
Mixers
EV-700PS QCEA00
Amplifiers
• Recording in high-quality WAV format (44.1kHz/32kHz, 16 bit)
• Emergency broadcasts prioritized in emergency situations
• Automatic gain control (AGC) function for adjusting the playback volume to a reference level
• Users can create or edit/update sound source files by directly inputting new phrases or combining prerecorded
phrases to create audio programs that meet their particular PA needs.
• Creation/editing/storage on a memory card (storage capacity 32,768 sound source files and 256 audio programs)
• 35 preinstalled sound source files
• On-screen GUI facilitating intuitive remote storage of sound source files and activation of broadcasts.
• Playback of sound source files activates broadcasting patterns in a connected matrix device.
Differences between the NX-100 and NX-100S
NX-100
NX-100S
Audio transport
Yes
Yes
Switch transport
Yes
Yes
RS-232C transport
Yes
No
AC or 24 V DC
AC only
Input signal LED
No
Yes
Input peak level LED
No
Yes
Phantom power supply
No
Yes
Power source
TOA Electronics, Inc. 16
Conference
Systesm
Megaphones
NX-100SPS US
Intercom
vNetwork Audio Adapter Economy Version
Security
& Safety
NX-100PS US
• Converts analog audio (mic or line) to packet audio IP format for transmission over existing local or wide area networks (LAN/WAN) including
the Internet
• Bi-directional audio transport plus contact closures and serial RS-232
(NX-100 only)
• Reduces installation and operational costs when distributing audio
signals to remote locations
• Balanced mic/line input with adjustable volume control
• Phantom power for condenser microphones (NX-100S only)
• Balanced line output
• Built-in Ethernet port (10/100BaseT)
• Point-to-point transmission (Unicast) of audio signals to up to four locations (LAN/WAN/Internet)
• Simultaneous transmission (Multicast) of audio signals to up to 64 locations (LAN/WAN)
• Control inputs can initiate and terminate audio transmissions without the
need for dedicated PC-based or other control equipment
• Eight control inputs with adjustable contact off delay time
• Eight control outputs: open collector output
• Adjustable sample rate and audio bandwidth allows efficient use of
network resources
• Minimum delay: 20 ms
• Multiple error correction modes
• Intuitive Configuration, Operating and Management software
• Browser-based software allows control and monitoring from any network-based PC
• Convenient End User features including customizable Operation software, Operation logs and password protection
• Front panel indication: Link/Active, Full-Duplex/Collision, Status, Error,
Run
• Signal and Peak Indicators (NX-100S only)
• Front panel reset button
• External 24 VDC input for battery backup operation (NX-100 only)
• Easy to upgrade flash memory firmware
• Compact, half-rack size unit (1 RU)
• Includes AC power supply, model AD-246 (order NX-100PS/NX-100SPS)
• Optional rack-mount kits (1 RU), model MB-15B-BK (1 NX-100/NX100S), model MB-15B-J (2 NX-100/NX-100S)
Reference
vNetwork Audio Adapter
Speakers
Network Audio Adapters
Microphones
Network Audio Adapters
Wireless
Systems
The NX-300 uses an advanced implementation of its Packet Audio™ streaming technology (same as NX-100) with improved broadcast capacity
& system expandability, WAV file record functions and addition of other advanced features. The NX-300 can be used to create wide area PA and
announcement systems over any IP network. Ideal for railway systems, airports, regional business broadcasts, Bank ATMs, parking system communications & industrial facilities.
vNetwork Audio Adapter
Rack Mount Equipment,
Network Audio and Others
NX-300
Mixers
• Transmits16 bit audio w/sample rates up 48kHz for better than CD audio quality
• Up to 500 NX-300s can be connected to each other via LAN or WAN
• Up to 1,000 links can be established and broadcast patterns
• Up to 64 NX-300s can be programmed for use over extremely wide areas
• High or low broadcast priority can b set to allow for paging override with alert tones, or announcements
• Broadcast patterns may be activated via contact closures or via the on-screen GUI
• Dual-channel capable of one-way stereo signal paths or bi-directional (full-duplex) dual mono signals
• Transformer balanced ins & outs to accommodate virtually any mic or line level signal
• A built-in WAV-file recorder allows record/playback of up to 8 messages each up to 2-minutes in length
• The rear panel features a complement of 8 contact inputs and outputs
• Adjustable output volume of a broadcast based on a programmed scheduler
• System configuration, control and monitoring via the supplied GUI software and also via web browser
Amplifiers
Speakers
Conference
Systesm
Megaphones
Intercom
Security
& Safety
Reference
17
TOA Electronics, Inc.
Microphones
Mixers
Stereo Input (L, R)
-10 dB*, 10 kΩ, unbalanced, RCA jack
Auxiliary Stereo Input
+4 dB*, 50 kΩ, unbalanced, phone jack
Stereo Output (L, R)
+4 dB*, 1 kΩ, unbalanced, phone jack
Monaural Output (1, 2)
+4 dB*, 1 kΩ, unbalanced, RCA jack
REC Output (L, R)
-10 dB*, 1 kΩ, unbalanced, RCA jack
Frequency Response
20 - 20,000 Hz (+1, -2 dB)
T.H.D.
0.01 % or less (1,000 Hz, rated input/output)
Noise Level (IHF-A)
When all volume controls are in minimum position: Stereo Output
(L, R): -105 dB* or less; Monaural Output (1, 2): -98 dB* or less
When the stereo, monaural (1, 2) are in maximum position: Stereo
Output (L, R): -94 dB* or less; Monaural Output (1, 2): -95 dB* or
less
Finish
Front Panel: Alumite, black Case: Steel, black
Dimensions
19.02” (W) × 1.81” (D) × 11.88” (H)
483 (W) × 46 (H) × 301.8 (D) mm
Weight
8.38lbs (3.8kg)
Accessory
Rack mounting screw x 4, Rubber foot x 4, Knob (blue, small) x 2,
Knob (red, small) x 2, Knob (blue, large) x 1, Knob (red, large) x 1
M-633D CU
M-633D CU
• Stereo mixer with 12 input channels (6 monaural inputs and 3 stereo
inputs) and 6 output channels (2 monaural outputs, 1 stereo output, and
1 stereo recording output)
• 2 monaural bus lines allow each input signal to be assigned to each bus
line individually
• Automatic Resonance Control function, Feedback Suppression function,
and Automatic Clipguard enhance sound intelligibility
• Reduces unpleasant room resonance and feedback to deliver clear,
highly articulate sound
• Ideal for houses of worship, gymnasiums, meeting rooms, and more
*0 dB = 1V
Input
6 monaural input channels, switchable LINE, MIC or PHANTOM
LINE: -10dB*, 2.4k Ω; MIC:-46 dB*, 2.4k Ω
PHANTOM:-46 dB*, 2.4k Ω, +24V Dc, electronically balanced
Removable terminal block (3 pins), phone jack,
3 stereo inputs (L, R)
-10 dB* / 10k Ω, RCA jack, stereo mini jack
Bus Line
Monaural channel x 2, stereo channel x 1
Frequency Response
20 Hz - 20kHz
Sampling Frequency
48 kHz / 24 bits
Dynamic Range
90 dB or more (IHF-A weighted)
Output
3 monaural outputs; 0 dB*, electronically balanced, removable
terminal block (3 pins)
1 stereo output (L, R); 0 dB*, electronically balanced, removable
terminal block (3 pins)
1 stereo recording output (L, R); -10 dB*, RCA jack
Signal Processing
Automatic Resonance Control (ARC); Feedback Suppressor (FBS);
Automatic Clipguard (ACG); Automatic Mute
Dimensions
16.54” (W) x 1.73” (D) x 13.44” (H)
420 (W) x 44 (H) x 341.1 (D) mm
Weight
8.82lbs (4kg)
D-2000 Series Digital Mixing System
vRemote Console Unit
vConsole Case for Q-D-2012C
Q-D-2012C
Q-D-2012AS
Reference
The Q-D-2012C is a 6U rack mountable Remote Console Unit designed for exclusive use with the D-2008SP Digital Mixing Processor Unit. Assigned
to any desired channels inside the D-2008SP by the dedicated software, the Q-D-2012C’s 12 motorized faders and 8 rotary encoders can remotely
adjust their volumes. Desired preset memories can be recalled using 8 function keys. It is equipped with 1 channel line input (stereo), which allows
the audio signal to be transmitted to the D-2008SP via monitor bus. Audio signals inside the D-2008SP can be monitored via monitor bus through
headphones connected to a stereo headphone output. The Q-D-2012C can be installed on a desk with the additional use of an optional Q-D-2012AS
Console Case.
Conference
Systesm
vDigital Stereo Mixer
Speakers
Digital Stereo Mixer
Rack Mount Equipment,
Network Audio and Others
Line: -10 dB*, 10 kΩ, unbalanced, phone jack; Mic: -60 dB*, 1 kΩ,
balanced, XLR3-pin connector; Mic (Pad): -40 dB*, 1 kΩ, balanced,
XLR3-pin connector
Mixers
10 W
Monaural Input
Megaphones
*0 dB = 0.775 V
120 V AC, 50/60 Hz
Power Consumption
Intercom
• Two mono mic/line inputs, each with compressor and high pass filter
• Four stereo inputs with RCA and 1/4” phone plug connectors
• Stereo output with separate paralleled record outputs
• Two mono outputs, switchable to stereo sum
• Inputs independently assignable to any combination of stereo and mono
outputs
• Stereo and mono sub-inputs for direct access to individual mixing buses
• Auto-priority of mono over stereo inputs for paging/BGM applications
• Low and high frequency EQ for stereo output (with clipping indicators)
• Security cover and rack-mount kit included (1 RU)
Power Source
Amplifiers
M-243 L
M-243 L
Security
& Safety
v6-Channel Stereo Mixer
Wireless
Systems
Stereo Mixer
TOA Electronics, Inc. 18
Microphones
D-2000 Series Digital Mixing System
Wireless
Systems
vDigital Mixing Processor Unit
D-2008SP CU
Rack Mount Equipment,
Network Audio and Others
Mixers
Amplifiers
• Ideal for applications including; hotel banquet and function rooms, indoor sports facilities, multi-purpose halls, houses of worship, and more
• NOM (Number of Open Microphones) - automatically adjusts output levels based on the total number of open microphones
• Ducker function (auto-mute function) - automatically attenuates outputs of channels with low priority
• Highly effective feedback suppression: providing feedback elimination for up to 4 channels. In addition, each channel can control 12 problem frequencies, making it convenient for feedback suppression in different areas of the same hall.
• 4 bus assignable feedback suppressions with 2 versatile suppression modes: Auto mode or realtime
dynamic mode
• Delay, high-pass, low-pass and notch filters, parametric equalizers, compressor/auto leveler, gate,
crossovers and crosspoint gain
• 32 preset memories for user convenience
• Intuitive GUI helps streamline settings and adjustments
• D-2000 Series units can be used in conjunction with the optional D-911 VCA Fader Unit providing
analog mixer user interface
• RS-232C port allows external control when connected to external devices such as AMX and Crestron control units
• User-specific configurations
• 24-bus matrix: flexible input-to-output signal routing for zoning or room-combining
• A 128 combined input and/or output system can be constructed by connecting four D-2008SP units
using the CobraNet* module. LAN-connected D-2008SP units can be remotely operated from TOA’s
PC software
• Works with optional Q-D-2012C fader controller using LAN connection
D-2000 Series Modules
Speakers
vMic/Line Input Module
vLine Output Module
vCobraNet Interface Module
D-2000AD1
D-2000DA1
D-2000CB
• 4-channel, XLR connectors
• A/D converter: 24 bit
• Phantom power supply (48V)
• THD: 0.008% or less
• 4-channel, XLR connectors
• D/A converter: 24 bit
• THD: 0.008% or less
• Allows audio transmission among
D-2008SP’s.
Conference
Systesm
Megaphones
D-2000AD1
D-2000DA1
D-2000CB
4 channels, Mic/Line selectable; Mic: -50/36dB, 2.6kΩ, electronically-balanced
Line: -10dB , 2.6kΩ/+4dB 7kΩ, electronically-balanced
Connector: XLR-3-31 equivalent, Phantom
power supply (48V DC can be used when
set for the Mic)
Ground lift switch
Output
4 channels, +4dB /-10dB (changeable),
adaptable load of 600Ω or more, balanced
(electronically-balanced)/ unbalanced
(changeable), XLR-3-32 equivalent
Network I/F
CobraNet*: 100BASE-TX, PRIMARY/
SECONDARY 2 system, RJ45 connector,
enables decentralized installation. (audio
transmission only)
Connection Cable: shielded twisted pair
(STP) CAT-5 or higher LAN cable (note
network should be completely independent of other LAN.)
Number of D-2008SP Connection: Max. 4
Switching Sub Stage: Max 7
Max Extend Distance: 100m (328.1ft)
(connected via a switching hub)
A/D Converter
24 bit
D/A Converter
24 bit
Input
16 channels, 20/24 bit
THD
0.008% or less (+4dB input)
THD
0.008% or less
Output
16 channels, 20/24 bit
Intercom
Input
Security
& Safety
* CobraNet* was developed by Cirrus Logic, a US company,
and is network protocol utilizing Ethernet networks to perform
high-quality multi-channel digital transmission. It allows using
existing Ethernet equipment such as CAT-5 switching hubs.
* CobraNet is a registered trademark of Cirrus Logic Corporation
Reference
19
TOA Electronics, Inc.
Microphones
Digital Mixer
Wireless
Systems
vDigital Modular Mixer
D-901 US
The DP-K1 is a 3U rack mountable Digital Audio Processor. It features Automatic Resonance Control (ARC) that automatically generates an optimum filter curve to improve sound clarity after measuring the acoustic characteristics in architectural space. It permits flexible configuration of inputs
and outputs, from 2-IN/4-OUT to 8-IN/8-OUT using the optional modules. Each function is set by a PC using the dedicated software. The settings
can be stored in the unit’s internal memory and the stored preset memories can be recalled from the unit without connecting the PC. This rackmount digital mixer / processor is suitible for installed sound applications such as houses of worship, sports facilities, convention centers, airports,
and others.
vDigital Audio Processor
DP-K1 CU
vVCA Control Module
D-911
D-984VC
Security
& Safety
• Interface to D-911 Remote Controller via Cat5 cables or configure
custom interface
• Eight RJ-45 connectors
• Control up to 12 inputs, eight outputs
• Eight programmable switch closure inputs for activation of memory,
volume up/down, channel on/off and stereo input selection
• Eight programmable relay outputs of memory, channel on/off, contact
input status and stereo input selection
Reference
• Remote control of up to twelve inputs and eight outputs
• Eight programmable control switches and LED’s
• Connects to D-984VC module via Cat5 cables (maximum distance
100m / 328ft using Cat5)
Megaphones
vVCA Fader Unit
Intercom
Digital Mixing Systems Optional Accessories and Modules
Conference
Systesm
Speakers
• Modular design allows up to 8 mic/line inputs and 8 line outputs (modules not included)
• Auto Resonance Control (ARC): Advanced measurement and processing algorithm
improves speech intelligibility and sound quality in facilities with challenging acoustic
environments
• Automatically identifies room mode frequencies and applies an inverse response curve to
compensate for the measured room response
• Essential audio processing tools — compressors, gates, crossovers, multi-band filtering,
parametric, high/low-pass, all-pass and notch filters, horn EQ, high/low shelving and
output delay
Amplifiers
Integrated DSP and Control System
Mixers
Rack Mount Equipment,
Network Audio and Others
• Modular design allows versatile configurations of up to 12 inputs and 8 outputs
• Auto-Mixing allows “set-and-forget” operation
• Feedback Suppression automatically attenuates up to 12 problem frequencies
• Eight bus matrix with crosspoint gain control allows flexible input-to-output
signal routing for zoning or room-combining
• PC software for offsite programming and archiving settings
• 16 internal memories for storage and recall of different signal routing and
parameter configurations
• AMX and Crestron software modules available - connects via RS-232
TOA Electronics, Inc. 20
Microphones
Digital Mixing Systems Optional Accessories and Modules
Wireless
Systems
Digital Mixing Systems Optional Modules
Rack Mount Equipment,
Network Audio and Others
Mixers
Amplifiers
Speakers
vMic/Line Input Module (24 bit/ Monaural Type)
vMic/Line Input Module (24 bit/ Monaural Type)
D-921E
D-921F
• Two balanced mic or line level inputs
• 24-bit A/D converters
• Adjustable input gain
• Phantom power
• Phoenix-style terminal block
• Two balanced mic or line level inputs
• 24-bit A/D converters
• Adjustable input gain
• Phantom power
• XLR-F connectors
vMic/Line Input Module (20 bit/ Monaural Type)
vMic/Line Input Module (20 bit/ Monaural Type)
D-922E
D-922F
• Two balanced mic or line level inputs
• 20-bit A/D converters
• Adjustable input gain
• Phantom power
• Phoenix-style terminal block connectors
• Two balanced mic or line level inputs
• 20-bit A/D converters
• Adjustable input gain
• Phantom power
• XLR-F connectors
vStereo Select Input Module
vAES/EBU Digital Input Module
D-936R
D-972AE
• Four stereo connector pairs
• Unbalanced line level
• Individual input gain
• Programmable switching between
connector pairs or summing mode
• Occupies two input channels
• RCA pin jack connectors
• Four digital outputs
• AES/EBU format
• XLR-M connectors
• Maximum distance: 328ft (100m)
Conference
Systesm
D-921E*2
Input
Connector Type
D-921F
D-922E*2
2 channels, Mic/Line changeable
Mic: –50/–36dB*1 , 4.7k Ω , electronically-balanced
Line: –10/+4dB*1 , 10k Ω , electronically-balanced
Phantom power supply (+15V, can be used when set for the
microphone)
Ground lift switch
Removable terminal block
Megaphones
A/D Converter
XLR-3-31
2 channels, –50/–36/–10/+4dB*1 (Selectable with the DIP
switch), 4.7k Ω , electronically-balanced
Phantom power supply (15V, can be set with the DIP switch)
Ground lift switch (can be set with the DIP switch)
Removable terminal block
24 bits
XLR-3-31
D-936R
4 stereo inputs (selection of 1
stereo or mixing or all 4 stereo inputs) –10dB*1 , 10k Ω
RCA pin jack
20 bits
Frequency Response
20 – 20,000Hz, ± 1dB (+4dB*1 input)
Sampling Frequency
48kHz
Dynamic range
Over 100 dB (IHF-A weighted) (+4dB*1 input)
Over 85 dB (IHF-A weighted) (+4dB*1 input)
Under 0.05% (+4dB*1 input)
Under 0.2% (+4dB*1 input)
Total Harmonic Distortion
Finish
Over 100dB (IHF-A weighted)
Under 0.5%
Panel: Pre-coated steel plate, black, 30% gloss
Intercom
Dimensions
Weight
D-922F
1.4” (W) x 4.7” (H) x 7” (D) [35 (W) x 119.5 (H) x 178.4 (D) mm]
0.31lbs (140 g)
0.33lbs (150 g)
0.28 (125g)
0.3lbs (135 g)
0.32lbs (145 g)
*1 0dB = 0.775V
*2 Accessory: (D-921E/D-922E). Removable terminal block type connector (preinstalled on the unit) x 2
Security
& Safety
Reference
21
TOA Electronics, Inc.
vLine Output Module
D-923AE
D-971M
• Two digital inputs
• AES/EBU format
• XLR-F connector
• Maximum distance: 328ft (100m)
• Four balanced line level outputs
• XLR-M connectors
vLine Output Module
vLine Output Module
D-971E
D-971R
• Four balanced line level outputs
• Phoenix-style terminal block connectors
• Four stereo or mono sum line level outputs
• RCA pin jack connectors
D-971R
4 channels, +4dB*1, adaptable load of over 600 Ω, electronically-balanced
Removable terminal block
RCA pin jack
24 bits
Sampling Frequency
48kHz
Frequency Response
20 – 20,000Hz, ± 1dB
Under 0.05%
Finish
Panel: Pre-coated steel plate, black, 30% gloss
Dimensions
Weight
1.38” (W) x 4.7” (H) x 7” (D) [35 (W) x 119.5 (H) x 178.4 (D)mm]
0.36lbs (165g)
0.31lbs (140g)
0.33lbs (150g)
vRemote Control Module
vRemote Control Module
D-981
D-983
• Eight programmable switch closure inputs for activation of memory, volume up/down, channel on/off
and stereo input selection
• Eight programmable relay outputs of memory,
channel on/off, contact input status and stereo input
selection
• Twenty-four programmable switch closure inputs for
activation of memory, volume up/down, channel on/
off and stereo input selection
• Sixteen programmable relay outputs of memory,
channel on/off, contact input status and stereo input
selection
Contact input
D-981*2
D-983
COM + terminals 1-8: Open voltage: 5V DC, short-circuit current:
5mA removable terminal block type connector
COM + terminals 1-24: Open voltage: 5V DC, short-circuit
current: 5mA RJ45 connector x 4
Control
Preset memory selection
Volume control
Any preset memory can be recalled. Control method: No-voltage make of over 100ms/no-voltage make single pulse of over 100ms
Any input/output channel volume can be turned UP or DOWN.
Control method: 1 step variation for no-voltage make single pulse of over 100ms
1 step continuous operation for every 70ms for no-voltage make of over 100ms. Can be reset when at break.
Variable range; - ∞ dB to +10dB
Channel
Stereo selection
Contact output
Any input/output channels can be turned ON and OFF.
Control method: No-voltage make of over 100ms/no-voltage make single pulse of over 100ms
Input channel lines of the D-936R (optional) or the D-937SP (optional) (4 stereo input module) can be selected.
Control method: No-voltage make of over 100ms/no-voltage make single pulse of over 100ms
COM + terminals 1-8: No-voltage make contact input, contact capacity: 24V DC, 100mA removable terminal block type connector
Finish
Panel: Pre-coated steel plate, black, 30% gloss
Dimensions
Weight
COM + terminals 1-16: No-voltage make contact input, contact
capacity: 24V DC, 100mA RJ45 connector x 4
Conference
Systesm
Total Harmonic Distortion
Speakers
Over 100dB (IHF-A weighted)
Megaphones
Dynamic range
Intercom
XLR-3-32
D/A Converter
1.38” (W) x 4.7”(H) x 7” (D) [35 (W) x 119.5 (H) x 178.4 (D)mm]
0.28lbs (125g)
0.37lbs (170g)
*1 0dB = 0.775V
*2 Accessory: (D-971E, D-981) Removable terminal block type connector (preinstalled on the unit); (D-972AE) Ferrite clamp x 2
TOA Electronics, Inc. 22
Reference
Connector Type
4 channels (2 outputs for each channel),
–10dB*1, adaptable load of over 600 Ω
Amplifiers
D-971E*2
Security
& Safety
D-971M
Output
Mixers
vAES/EBU Digital Input Module
Rack Mount Equipment,
Network Audio and Others
Wireless
Systems
Digital Mixing Systems Optional Modules
Microphones
Digital Mixing Systems Optional Accessories and Modules
Microphones
Digital Stereo Mixer
Wireless
Systems
The M-864D is a 4U rack mountable Digital stereo mixer having 8 monaural Mic/Line input channels and 2 stereo input channels (7 sources), 6
output channels including 4 bus assignable monaural output channels and 1 stereo recording output channel. It is equipped with digital signal processing functions such as Automatic Resonance Control function (ARC) Feedback Suppressor function (FBS), Automatic stereo input mute function
(AUTO MUTE or Ducker), and Parametric Equalizer. Advanced acoustic compensation can be automatically performed without using any acoustic
measuring instruments. Furnished with various function setting buttons and 14 analog volume faders, the M-864D can be operated without the need
for a PC. However, it can also be operated by connecting the PC or optional Remote control panel. It can be mounted in an EIA standard component
rack (4U size).
Rack Mount Equipment,
Network Audio and Others
vDigital Stereo Mixer
M-864D CU
• Automatic Resonance Control function (ARC)
• Feedback Suppressor function (FBS)
• Automatic stereo input mute function (AUTO MUTE or Ducker)
• Parametric Equalizer
Mixers
M-864D Optional Remote Control Modules
Amplifiers
Speakers
vAssignable Remote Button Panel
vAssignable Volume Controller
ZM-9011
ZM-9012
• Fits in a standard dual-gang electrical box
• Four assignable buttons each with LED status indicator
can control Xpoint settings (on/off, select), paging activation, scene and relay activation
• Assignable ID rotary adjustment on box
• Supplied matching decor plate
• Required RC-001T
• Fits standard single-gang electrical box
• Rotary encoder can be assigned to control any input or
output volume
• Multiple input or outputs may be “ganged” for master volume control
• Multi-segment LED indicator provides visual volume level status
• Supplied matching decor plate
• Removable terminal block
vAssignable Remote Button Panel
vAssignable Remote Button Panel
w/Volume Control
ZM-9013
Conference
Systesm
ZM-9014
Megaphones
• Fits in a standard dual-gang electrical box
• Eight assignable buttons each with LED status
indicator can control Xpoint settings (on/off, select),
paging activation, scene and relay activation
• Assignable ID rotary adjustment on box
• Supplied matching decor plate
• Removable terminal block
• Required RC-001T
Intercom
M-864D GUI Software
Security
& Safety
Reference
23
TOA Electronics, Inc.
• Fits in a standard dual-gang electrical box
• Four assignable buttons each with LED
status indicator can control Xpoint settings
(on/off, select), paging activation, scene
and relay activation
• Assignable ID rotary adjustment on box
• Supplied matching decor plate
• Removable terminal block
• Required RC-001T
M-864D App for iOS only
Microphones
Rack Mount Equipment,
Network Audio and Others
The DP-SP3 Digital Speaker Processor enables you to enhance your sound system easily and inexpensively. Designed specifically to work with
speakers, the processor taps into characteristics of individual speakers and draws out their best possible performance, to help realize richer, more
expressive sound in a variety of venues. The DP-SP3 has a built-in library of presets for the most popular TOA speakers, which enables you to
enjoy well-balanced sound immediately, without going to the trouble of inputting complex parameter settings. In addition, a preset memory of up to
16 setting patterns allows you to instantly recall the setting you need for a particular venue. The processor is also packed with such essential audio
processing functions as Equalizer, Crossover, Matrix, Compressor and Delay.
Wireless
Systems
Signal Processing Equipment
vDigital Speaker Processor
DP-SP3 CU
vDigital Ambient Noise Controller
DP-L2 CU
Reference
Security
& Safety
Intercom
Megaphones
Conference
Systesm
Speakers
• Digital ambient noise control (ANC) function with 4-LED metering automatically adjusts output gain to match changes in ambient noise levels
• Exclusive TOA algorithm distinguishes unit output sound level from ambient noise levels, for more accurate control
• Monitor output for sound picked up by the ambient noise sensor microphone
• Automatic level control feature with 4-LED metering maintains input signal at a constant level by adjusting input signals to appropriate levels when
the sound level is too low
Amplifiers
Mixers
• 24-bit, 96 kHz sampling for clear, high-quality and realistic sound, with a full sense of presence
• 10 filters on each input and 12 filters on each output
• 2 inputs & 6 outputs, and processor can work with a 3-way multi-amp system
• Setting and operation via a LAN connected PC with installation of the supplied intuitive control/ operation software
• Preset memory for up to 16 different setting patterns, for instant recall of patterns best suited to a particular venue
TOA Electronics, Inc. 24
Microphones
Amplifiers
Wireless
Systems
Micro Amplifiers
vMicro Amplifier
Rack Mount Equipment,
Network Audio and Others
AV-20D AM
AV-60S-AM (not shown)
Mixers
• Micro Class D amplifier for use in meeting/board rooms & signage applications
• UL 2043-rated for plenum installation
• Energy Star certified including Auto Off/Standby
• AV-20D: 20W x 2 @ 4 Ohms / 40W @ 8 Ohms in Bridge Mode
• AV-60S: 60W x 1 @ 4 Ohms or 70V
• Small size (approx. 6” x 6” x 1.75”) allows convenient & flexible placement.
• L/R Line inputs via: removable Transformer-Balanced Terminal Block, 1/8” TRS mini-jack and RCA connections
• Bass & Treble Controls
• Input signal present (-20dB) and Peak LED indicators
• Clip Limiter prevents distortion due to overload.
• Remote Volume Control port for use with 10kOhm pot
Amplifiers
AV-20D & AV-60S Optional Accessories
Speakers
vMetal Pole Mount Bracket
vMetal Desk-mount Bracket
MB-AV20PM AM
MB-DM820 AM
vMetal Rack Mount Kit
vMatching Transformer
MB-AV20RM AM
MT-S0301
• 1 or 2 amplifiers are mountable in 1 unit
• The MT-S0301 allows for a 30W @ 70V output
by connecting to the bridge output of the AV-20D.
Conference
Systesm
MA Series Matrix Mixer Amplifiers
Megaphones
Comprised of a pre-amp, a digital signal processor (DSP), and a powerful, 250 W × 4 multi-channel digital amp, this single versatile unit with
enhanced functionality caters to both background music and paging applications. Control preferences tailored to venue needs, as well as matrix
and DSP settings, can be made simply, without the need for a computer. Wiring, installation and time spent on adjustments are all greatly reduced.
The paging function has a two-level order of priority for manual activation or automatic activation upon sensing a certain level of voice input. Ideally
suited for establishments where different kinds of background music are required for different locales and where staff paging announcements are
selectively directed to one of certain areas such as the restaurant or sales area.
Intercom
Security
& Safety
vMatrix Mixer Amplifier
vMatrix Mixer Amplifier
MA-725F-AM
MM-700F-AM
• 4 BGM/Audio source selection on each output
• 2 levels of priority paging/mute functions
• Can be assigned to all 4 output channels individually
• DSP preset selection
• Rotary encoder + Dip switches
• 16 presets x 4 memory banks
• For typical speaker EQs and general crossover settings
• Wall remote controls for each output
• Output link, Remote link and many more functions
• 4-Channel Matrix Mixer w/ DSP
MA Series Matrix Mixer Amplifiers Accessories
vWall Panel Remote
Reference
WP-700-AM
• MA/MM-700 Volume/Select Wall Panel Remote
• Up to four may be used with MA-725F or MM-700F
25
TOA Electronics, Inc.
Microphones
A-2000 Series Mixer Power Amplifier
Wireless
Systems
vMixer Power Amplifier
A-2240 CU
Rack Mount Equipment,
Network Audio and Others
• Cost effective and durable mixer power amplifier
• User friendly front panel allows easy operation
• 2 electronically balanced microphone inputs, 2 AUX inputs and recording output
• Phantom power at MIC 1
• Wide tone-control adjustment range of -/+10 dB for both bass and treble
• 100V / 70V line or 4Ω speaker outputs
• Booster amplifier for additional power
Mixers
A-5000 Series Mixer Amplifiers
vPower Amplifier
60W
120W
A-5006
Speakers
Amplifiers
• 1U-half size compact and simple hardware for easy setting
• Hi-/Low-Z speaker connection
• 2 x mic/line inputs with mute
• Intuitive GUI software for sound optimization
• 5-band Parametric Equalizer for each input and output
• Remote Master Volume Control
• Mute (Mic 1 priority: Manual mute)
• Compressor for each input 1 and 2
A-5012
Power Source
100 - 240 V AC, 50/60 Hz
60 W
120 W
106 W(rated output), 20 W(based on cULus standards)
207 W (rated output), 39 W(based on cULus standards)
Consumption
Max. 2 A
Max. 3 A
Frequency Response
50 Hz - 20 kHz, 1/8 output
Distortion
1 % or less (1 kHz, rated output)
INPUT 1, 2: MIC -60 dB*, LINE -20 dB*, MIC/LINE selectable
2.2k ohms, electronically-balanced, removable terminal block (5 pins)
INPUT 3, 4: LINE -20 dB*, 10k ohms, unbalanced, RCA pin jack
Input
Output
Conference
Systesm
Rated Output
Power/Current
Speaker: 4 ohms, 70 V (83 ohms), 100 V (170 ohms)
removable terminal block (5 pins)
Speaker: 4 ohms, 70 V (42 ohms) , 100 V (83 ohms)
removable terminal block (5 pins)
MIC 1, 2: 60 dB or more, LINE 1 - 4: 80 dB or more (A-weighted)
Function
Parametric equalizer: 5 points settable on each input and output, 20 Hz - 20k Hz +/-15 dB, Q: 0.267 - 69.249
Compressor: ON/OFF settable on Inputs 1 and 2 (OFF by default)
Threshold, Ratio, Attack time, Release time, and Gain are settable independently on each input
Control
Mute control, Remote master volume control, Power ON/OFF switch, Ground lift
Indicator
Intercom
S/N Ratio
Power, Signal, Peak, Protect
Dimensions
8.27" x 2.07" x 14.76" (210 (W) X 52.5 (H) X 375 (D) mm)
Weight
7.94 lbs. (3.6 kg)
Accessory
1 x CD(setting software), 1 x Large type removable terminal plug (5 pins), 2 x Small type removable terminal plug (5 pins), 6 x Bracket mounting screw, 6
x Plain washer, 1 x Power supply cord (2 m (6.56 ft.))
8.6 lbs. (3.9 kg)
Security
& Safety
Rack mounting brackets: MB-15-BK, MB-15B-J, YA-706
A-5000 GUI
Reference
Options
Megaphones
A-5006 3CUD00
A-5012 3CUD00
TOA Electronics, Inc. 26
Microphones
9000M2 Series Modular Digital Matrix Mixer/Amplifiers
Wireless
Systems
The TOA 9000M2 Series Digital Matrix Mixer/Amplifiers redefines the conventional mixer/amplifier category by combining a modular matrix mixer,
digital signal processor (DSP) and amplifiers in a compact, two rack space package. This versatile series is ideal for multi-zone paging, music
distribution and room-combining applications. The 9000 Series allows for easily configured, custom systems with up to eight mic/line inputs and
eight outputs. Each 9000M2 Series chassis has two output channels with built-in DSP, including ; ten band parametric EQ, compressor, delay and
more. Input and output modules include additional DSP. A new integrated operating mode provides powerful functionality for both simple mixing and
complex multi-zone paging applications. Features include telephone zone paging, automatic microphone mixing and ambient noise control.
Rack Mount Equipment,
Network Audio and Others
vModular Digital Matrix Mixer
M-9000M2 CU
Mixers
• Flexible modular design - up to 8 mic/line inputs and 8 outputs
• Detailed GUI software screens make even complex settings intuitive and easy to understand
• Any of the 30 EQ presets appropriate to the TOA speakers used may be selected for each output
• Up to 16 flush-mount remote panels connectable
• Programmed operating system - 32 scene memories and 32 paging memories
• Dual Channel Digital Signal Processor (DSP) on Input & Output channels:
• 10-Band Parametric EQ/High and Low Pass Filters/Bass and Treble/Loudness/Compressor/Gate/Ducker/NOM (Automix)/Delay (Output channel
only)/TOA Speaker EQ Presets (Output channel only)/DSP included on M-9000M2 Mainframe Outputs,D-001T, D-001R and T-001T modules
A-9120SM2 CU
A-9240SHM2 CU
Power Source
Amplifiers
Power Consumption
150W
250W
Audio Input
Audio Output
40W
Max. 8 channels, modular construction (modules optional)
Power amplifier input: 0 dB, 10 kΩ, RCA pin jack
Speakers
Module Slot
Speaker output: 240 W, 21 Ω, BTL output,
removable terminal block (4 pins)
Conference
Systesm
Total Harmonic Distortion
S/N Ratio
-20 dBFS
(D): 20 - 20,000 Hz, 0.02% THD
(T): 50 - 20,000 Hz, 0.5% THD
20 - 20,000 Hz, 0.008% THD
Power amplifier section: 20 - 20,000 Hz, +0, -1 dB
Analog input module to speaker output: 20 - 20,000 Hz, +1, -3 dB
Power amplifier section: 0.008% (22 kHz LPF,
1 kHz, rated power)
Analog input module to speaker output:
0.008% (22 kHz LPF, 1 kHz, rated power)
Power amplifier section: 0.0008% (22 kHz
LPF, 1 kHz, rated power)
Analog input module to speaker output:
0.008% (22 kHz LPF, 1 kHz, rated power)
Megaphones
At Input short, 20 - 20,000 Hz, set to ALL FLAT or OFF setting;
Output volume min.: 90 dB (preamplifier output); Output volume max.: 61 dB
(preamplifier output, input 1 volume: 0 dB, other inputs: OFF); Power amplifier section: 110 dB
Cross Talk
0.008% (at 22 kHz LPF, 1 kHz, +10 dB output)
At Input short, 20 - 20,000 Hz, set to ALL
FLAT or OFF setting; Output volume min.:
90 dB; Output volume max.: 61 dB (Input 1
volume: 0 dB, Other Inputs: OFF)
Bass: ±12 dB (at 100 Hz), Treble: ±12 dB (at 10 kHz)
Parametric Equalizer
10 bands, Frequency: 20 - 20,000 Hz, 31 points, Variable range:
Speaker Equalizer
10 (set up software has 30 TOA speaker presets)
High-pass Filter
Intercom
-12 dB/oct, Variable frequency range: 20 - 20 kHz, 31 points
Low-pass Filter
Compressor
Depth: 1 - 5
Delay
0 - 40 ms (1 ms steps), maximum 40 ms (CH 1 + CH 2) (mixer mode only)
Scene/Event Memory
32
Auxiliary Function
Key lock function
Security
& Safety
RS-232C, D-sub connector (9P, female); Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC, short-circuit
current: Under 1 mA, removable terminal block (14 pins); Control output: 4 outputs, open collector output, with stand voltage: 27 V DC,
control current: 50 mA, removable terminal block (14 pins); Remote volume: 2 channels, connect a 10 kΩ/linear taper variable resistor or
input DC voltage of 0 to +10 V, removable terminal block (14 pins)
Operating Temperature
-10oC to +40oC (14°F to 104°F)
Operating Humidity
35% to 80% RH (no condensation)
Finish
Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black, paint
Reference
Dimensions
16.54” (W) x 4.24” (H) x 13.98” (D)
420 (W) × 107.6 (H) × 355 (D) mm
16.54” (W) x 4.24” (H) x 15.55” (D)
420 (W) × 107.6 (H) × 395 (D) mm
16.54” (W) x 4.24” (H) x 13.9” (D)
420 (W) × 107.6 (H) × 353 (D) mm
Weight
28.66lbs (13kg)
24.25lbs (11kg)
13.23lbs (6kg)
Accessory
27
20 - 20,000 Hz, +1, -3 dB
Over 64 dB (at 20 kHz)
Tone Control
Control Input/Output
Preamplifier output 1, 2: 0 dB, 600 Ω, balanced, removable terminal block (3 pins)
Analog input (slot 1 - 8): -10 dB, 10 k Ω, unbalanced; Digital input (slot 1 - 4): 24 bit/48 kHz;
MIX output (slot 1 - 8): -14 dB, 330 Ω (CH 1 prefader output), unbalanced; Digital output (slot 5 - 7): 24 bit/48 kHz;
Power supply (slot 1 - 8): +24 V, -24 V, +6 V DC
Digital Audio Signal Reference Level
Frequency Response
Max. 8 channels, modular construction
(modules optional)
Preamplifier output 1: 0 dB, 300 Ω, unbalanced, RCA pin jack
Preamplifier output 2: 0 dB, 600 Ω, unbalanced, removable terminal block (3 pins)
Speaker output: Removable terminal block (7
pins); Direct: 120 W, 4Ω, unbalanced; Transformer: 120 W, 8Ω 25V & 70V, balanced
Power Bandwidth
M-9000M2 CU
120 V AC, 60 Hz
TOA Electronics, Inc.
Power cord (6.56ft [2m]) x 1, Rack mounting bracket x 2, Bracket mounting screw x 4, Blank panel x 7, Blank panel mounting screw x 14,
Removable terminal plug (3 pins) x 1, Removable terminal plug (7 pins) x 1, Removable terminal plug (14 pins) x 1 , CD x 1
A-9060DHM2 CU
A-9120DHM2 CU
Power Source
150 W
200 W
Microphones
100 W
Preamplifier output 1: 0dBV, 300Ω, unbalanced, RCA pin jack; Preamplifier output 2:
0 dBV, 600Ω, balanced, removable terminal
block (3 pins)
Preamplifier output 1, 2: 0dBV, 300Ω, unbalanced, RCA pin jack
Audio Output
Speaker output 1, 2: 60W, 70.7V line, 83Ω
x 2, BTL output, removable terminal block
(4 pins)
Analog input (slot 1 - 8): -10 dB, 10 kΩ, unbalanced; Digital input (slot 1 - 4): 24 bit/48 kHz; MIX output (slot 1 - 8): -14 dB, 330Ω (CH 1 prefader
output), unbalanced; Digital output (slot 5 - 7): 24 bit/48 kHz; Power supply (slot 1 - 8): +24 V, -24V, +6V DC
Digital Audio Signal Reference Level
-20 dBFS
Power Bandwidth
Power amplifier section: 0.0008% (22 kHz LPF, 1 kHz, rated power); Analog input module to
speaker output: 0.008% (22 kHz LPF, 1 kHz rated power)
Power amplifier section: 0.008% (22 kHz LPF,
1 kHz, rated power); Analog input module to
speaker output: 0.008% (22 kHz, 1 kHz LPF)
At Input short, 20 - 20,000 Hz, ALL FLAT or OFF setting; Output volume min.: 90dB (preamplifier output); Output volume max.: 61dB (preamplifier
output, input 1 volume: 0 dB, other inputs: OFF); Power amplifier section: 110dB
Cross Talk
Over 64 dB (at 20 kHz)
Tone Control
Bass: ±12 dB (at 100 Hz) Treble: ±12 dB (at 10 kHz)
10 bands, Freq: 20 - 20,000 Hz, 31 points, various range: ± 12 dB, Q: 0.3 - 5
Speaker Equalizer
10 (set up software has 30 TOA speaker presets)
High-pass Filter
-12 dB/oct, variable frequency range: 20 Hz - 20 kHz, 31 points
Low-pass Filter
-12 dB/oct, variable frequency range: 20 Hz - 20 kHz, 31 points
Compressor
Depth: 1 - 5
Delay
0 - 40 ms (1 ms steps), maximum 40 ms (CH1 + CH2) (Mixer mode only)
Scene/Event Memory
32
Auxiliary Function
Control Input/Output
Key lock function
RS-232C; D-sub connector (9P, female); Control input: 4 input, no-voltage make contact input, open voltage: 3.3V DC, short-circuit current: Under
1 mA, removable terminal block (14 pins); Control output: 4 outputs, open collector output, withstand voltage: 27V DC, control current: 50 mA,
removable terminal block (14 pins); Remote volume: 2 channels, connect a 10k Ω/linear taper variable register or input the DC voltage of 0 to +10
V, removable terminal block (14 pins)
Operating Temperature
-10oC to +40oC (14°F to 104°F)
Operating Humidity
35% to 80% RH (no condensation)
Finish
Dimensions
Weight
Accessory
Megaphones
Parametric Equalizer
Conference
Systesm
Power amplifier section: 20 - 20,000 Hz, +0, -1 dB; Analog input module to speaker output: 20 - 20,000 Hz, +1, -3 dB
Intercom
S/N Ratio
(D): 20 - 20,000 Hz, 0.02% THD
(T): 50 - 20,000 Hz, 0.5% THD
20 - 20,000 Hz, 0.008% THD
Frequency Response
Total Harmonic Distortion
Removable terminal block (7 pins); Direct:
60W, 4Ω, unbalanced, Transformer: 60W, 8Ω
25V and 70V, balanced
Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black paint
16.54” (W) x 4.24” (H) x 13.98” (D)
420(W) × 107.6(H) × 355(D) mm
16.54” (W) x 4.24” (H) x 15.55” (D) / 420 (W) × 107.6 (H) × 395 (D) mm
19.84lbs (9kg)
24.25lbs (11kg)
Power cord (2 m (6.56ft)) x 1, Rack mounting bracket x 2, Bracket mounting screw x 4, Blank
panel x 7, Blank panel mounting screw x 14, Removable terminal plug (4 pins) x 1, CD x 1,
Removable terminal plug (14 pins) x 1
Power cord (2 m (6.56ft)) x 1, Rack mounting
bracket x 2, Bracket mounting screw x 4,
Blank panel x 7, Blank panel mounting screw
x 14, Removable terminal plug (3 pins) x 1,
CD x 1, Removable terminal plug (14 pins) x 1
TOA Electronics, Inc. 28
Security
& Safety
Module Slot
Speaker output 1, 2: 120W, 70.7V line, 41Ω
x 2, BTL output, removable terminal block
(4 pins)
Amplifiers
Max. 8 channels, modular construction (modules optional); Power amplifier input 1, 2: 0 dBV, 10k Ω, RCA pin jack
Speakers
Audio Input
Reference
Power Consumption
A-9060SM2 CU
120 V AC, 60 Hz
Wireless
Systems
A-9060DHM2 CU
A-9120DHM2 CU
A-9060SM2 CU
A-9120SM2 CU
A-9240SHM2 CU
Rack Mount Equipment,
Network Audio and Others
• Flexible modular design - up to 8 mic/line inputs and 8 outputs
• Detailed GUI software screens make even complex settings intuitive and
easy to understand
• Any of the 30 EQ presets appropriate to the TOA speakers used may be
selected for each output
• Up to 16 flush-mount remote panels connectable
• Programmed operating system - 32 scene memories and 32 paging
memories
• Up to 12 filters plus compressor setting can be applied to each input-output channel
vDigital Matrix Mixer/Amplifier
Mixers
9000M2 Series Modular Digital Matrix Mixer/Amplifiers
Microphones
9000M2 Series Modular Digital Matrix Mixer/Amplifiers
Wireless
Systems
vPower Amplifier
P-9060DH CU
P-9120DH CU
60W
120W
Rack Mount Equipment,
Network Audio and Others
• 2-Channel Power Amplifiers with 70.7V outputs
• 2-Channel Power Amplifier models feature flexible output power allowing 50% power from one amplifier
channel to be allocated to the second amplifier channel
• Channel 1 & 2 inputs balanced (H=Hot, C=Cold and E=Shield) with selectable input sensitivity: 0dB or -20dB)
• Channel 1 input to ALL selectable switch
• 2 RU Rack Mounting hardware included
• Front panel LED indicators for: Protect, Peak, Signal and Power
9000 Series Modules
Mixers
Amplifiers
Speakers
Conference
Systesm
Megaphones
Intercom
Security
& Safety
Reference
29
vAmbient Noise Control Module
vInput/Output Control Module
AN-001T
C-001T
• Automatically adjusts output gain to compensate for
changes in ambient noise level
• Each input can be assigned to control a specific output
• Two inputs with +24VDC phantom power for condenser mics
• 14 preset gain ratios
• Accessory sensing microphone available, model AN-9001
• Maximum two per chassis
• Eight assignable control inputs for activating event volume,
up/down, mute, power on/off, emergency mute or synch on/off
• Eight assignable control outputs for activating external relays
• Removable terminal block
• Maximum one per chassis
vLine Input Module with DSP
vDual Mic/Line Input Module with DSP
D-001R
D-001T
• Two RCA phono inputs per channel provides stereo
summing
• Digital signal processing
• 10-Band parametric EQ
• Bass/Treble
• Loudness
• High and low pass filters
• Compressor
• Two balanced Mic / Line inputs
• Digital signal processing (10-Band Parametric EQ, Bass/
Treble, Loudness, High and Low Pass Filters, Compressor)
• Adjustable sensitivity (nine levels, -60 to -10 dBV)
• Phantom power (24 VDC)
• Removable terminal block
• Maximum four per chassis
• Required for VOX (Voice-Operated Switch) function and
input level metering
vSIP Module
vDual Line Output Expansion Module with DSP
SP-11NPS QAM
T-001T
• Allows paging from SIP phone systems
• Settings can be done via browser with a PC connected to
the network
• Five dry contact outputs can be activated by the dial operation on the phone while the communication is established
• Priority function is available
• Two balanced line outputs
• Digital signal processing (10-Band Parametric EQ, Bass/
Treble, Loudness, High and Low Pass Filters, Compressor,
TOA speaker EQ presets)
• Removable terminal block
• Maximum three per chassis
vRemote Control Module
vTelephone Zone Paging Module
RC-001TPS
ZP-001T
• Allows use of up to 16 RS-485 remote control panels
• Bi-directional RS-485 communication provides control
and status feedback display for each remote function
• Dual ports allow independent home runs for up to 8 modules ea.
• 24 VDC power adapter (optional accessory AD-246) required for
each port used
• May be used in any control option slot on 9000M2 frame and
even in addition to a C-001T when spare slots are available
• Required Module: ZM-9011, ZM-9012, ZM-9013, ZM-9014
• AD-246 - AC adapter supplied
• Telephone access paging to up to eight zones
• Uses DTMF dialing to access amplifier and/or line outputs
• Dial up to eight output zones in one operation
• Analog extension or page port compatible
• Page port operation requires contact closure activation
• RJ-11 telephone jack and removable terminal blocks
• Maximum one per chassis
TOA Electronics, Inc.
Microphones
9000M2 Series Modular Digital Matrix Mixer/Amplifiers
ZM-9001
• Switch up to four speaker lines on one amplifier output
• Two speaker amplifier inputs for Paging/BGM applications
• Works with built in 9000M2 I/O control output or optional
C-001T module only
• Wall-mount bracket included
• Supplied with 24VDC power supply, model AD-246
• Six buttons to activate preset selection or volume up/down
• Wiring: only one pair to chassis remote volume terminals
• Max. loop resistance: 100 ohms (3000 ft. 22AWG)
• Fits one gang electrical box
• Maximum two ZM-9001/ZM-9002 per chassis
• Uses built in 9000M2 REMT VOL port
vRemote Volume Switch Panel
vContact Closure Remote
ZM-9002
ZM-9003
• Volume control knob
• Wiring: only one pair to chassis remote volume terminals
• Max. loop resistance: 100 ohms (3000 ft. 22AWG)
• Four push buttons to activate preset selection or volume up/down
• Fits one gang electrical box
• Maximum two ZM-9001/ZM-9002 per chassis
• Uses built in 9000M2 REMT VOL port
• Fits in a standard dual-gang electrical box
• Removable screw terminal connector block
• Two momentary buttons and four latching buttons
• Works with contact inputs on 9000M2 mainframe and on C-001T
• May be assigned to control program change, volume up/down, channel
on/mute, emergency mute, power and paging prohibit function
• Removable terminal block
• Used built in 9000M2 REMT VOL port
vAssignable Remote Button Panel
vAssignable Volume Controller
ZM-9011
ZM-9012
• Fits in a standard dual-gang electrical box
• Four assignable buttons each with LED status indicator can
control Xpoint settings (on/off, select), paging activation, scene
and relay activation
• Assignable ID rotary adjustment on box
• Supplied matching decor plate
• Required RC-001T
• Fits standard single-gang electrical box
• Supplied matching decor plate
• Multi-segment LED indicator provides visual volume level status
• Rotary encoder can be assigned to control any input or output volume
• Multiple input or outputs may be “ganged” for master volume control
• Removable terminal block
vAssignable Remote Button Panel
vAssignable Remote Button Panel w/Volume Control
ZM-9013
ZM-9014
• Fits in a standard dual-gang electrical box
• Eight assignable buttons each with LED status
indicator can control Xpoint settings (on/off, select),
paging activation, scene and relay activation
• Assignable ID rotary adjustment on box
• Supplied matching decor plate
• Removable terminal block
• Required RC-001T
• Fits in a standard dual-gang electrical box
• Four assignable buttons each with LED status
indicator can control Xpoint settings (on/off, select),
paging activation, scene and relay activation
• Assignable ID rotary adjustment on box
• Supplied matching decor plate
• Removable terminal block
• Required RC-001T
Mixers
SS-9001PS
Amplifiers
vRemote Panel
Speakers
v4-Zone Speaker Selector
Conference
Systesm
• Generates band-limited pink noise for use in sound masking
applications
• In/Out processor loop for external EQ
• Compatible with Toa modular mixer-amps (BG-1000/2000, 700,
900MkII, 9000M2)
Megaphones
• Ceiling or wall-mount condenser microphone
• Fits one gang electrical box
• Use with AN-001T module or DP-L2 processor
Intercom
NM-01 AM
Security
& Safety
vNoise Generator
AN-9001
Reference
vAmbient Noise Sensing Microphone
Rack Mount Equipment,
Network Audio and Others
Wireless
Systems
9000 Series Modules
TOA Electronics, Inc. 30
Microphones
9000M2 Series Modular Digital Matrix Mixer/Amplifiers
Wireless
Systems
9000 Series Optional Accessories
Rack Mount Equipment,
Network Audio and Others
The cost-effective Multi-Zone Paging System is achieved with TOA’s zone selectable remote paging microphone and speaker line selector. The
Q-SS9012PS Multi-Zone Speaker Selector has 2 amplifier inputs and 12 individual relay switches to select the amplifier connected to each 12
speaker line/zone. This allows up to 12 zones for paging and BGM distribution with a dual channel amplifier or simple paging system with only a one
channel amplifier. TOA’s new concept offers a real cost effective multi-zone paging system. TOA’s multi zone paging system allows paging up to12
zones, utilizing a single channel amplifier by activating the speaker line selector from the desktop remote microphone.
vRemote Microphone
Q-RM9012PS
Mixers
• High-sensitivity electret-condenser gooseneck mic for clear voice
• 12 zone select buttons, All Call, Clear
• 12 Contact Outs corresponding to buttons (RJ-45 connector for use with shielded Cat5 wiring)
• Connects to C-IN on 9000M2 (mainframe & equipped with C-001T)
• Supplied with AD-246 AC Adapter
vSpeaker Selector
Q-SS9012PS
Amplifiers
• May work with internal or external amplifier
• 12 contact inputs and 12 speaker outputs. Power amp input is split into 12 zones with activation via contact closure
• Possible to expand number of 9000M2 paging zones along with conventional output zones (T-001T) up to 19 zones
• Can facilitate paging over BGM by switching between BGM output (amp input 2) and Page output (amp input 1)
• 19” rack-mountable (using optional MB-15B)
• Supplied with AD-246 AC Adapter
• IB-9012 AM supplied by request
Speakers
9000 Series Optional Accessories
Conference
Systesm
Megaphones
Intercom
Security
& Safety
Reference
31
TOA Electronics, Inc.
Microphones
• Eight module slots accept any combination of TOA plug-in
modules for custom system configurations
• Balanced, transformer-isolated output with selectable impedance, screw terminal connector and protective cover plate
• Dual mute bus permits multiple levels of paging priority using
optional mute-type modules
• External mute terminals for activating mute function with external
switch-closure
• Remote master volume terminals for control with an external 10k
ohm linear-taper potentiometer
• Individual channel and master volume controls
• Auxiliary output for connecting an external mixer or recording
device
• Bridging input/output for input expansion or recording device
• Normal, clip, power, protect, and signal indicators provide unit
status
• Optional rack-mount kit, model MB-25B (2 RU)
A-903MK2
30W
60W
120W
• Eight module slots accept any combination of TOA plug-in
modules for custom system configurations
• Direct low-impedance output mode bypasses output transformer
• Dual mute bus permits multiple levels of paging priority using
optional mute-type modules
• External mute terminals for activating mute function with external
switch-closure
• Low cut switch to limit low frequency response
• Bridging input/output for input expansion or recording device
• Over-current and thermal protection circuitry prevents potential
damage from overload, short-circuit and over-heating
• Optional rack-mount kit, model MB-25B (2 RU)
A-906MK2
Type
A-912MK2
Wireless
Systems
A-903MK2 UL
A-906MK2 UL
A-912MK2 UL
Rack Mount Equipment,
Network Audio and Others
v8-Channel Mixer Amplifier (UL version)
M-900MK2 UL
Mixers
v8-Channel Mixer Preamplifier (UL version)
Amplifiers
900 Series Amplifiers
8-channel mixer power amplifier
AC mains, 120 V, 60 Hz
Power Consumption
60W
100W
180W
Output Power
30 W RMS
60 W RMS
120 W RMS
Power Band Width
Speakers
Power Requirement
(D) 20 - 20,000 Hz, 0.5% THD, (T) 50 - 20,000 Hz, 0.5% THD
T.H.D
0.02% at 1 kHz, rated output
Inputs
Eight Input Ports: Each port accepts any input modules. One Bridging Input/Output
Input Sensitivity /Impedance
Input Port #1 to #8: 100 mV/10 kΩ Bridging Input/Output: 100 mV/3.3 kΩ
Preamp OUT /Power Amp IN
1000 mV into 600 Ω/1000 mV, 10 kΩ
Outputs
Main (T): 4 Ω, 25 and 70 volts, balanced, Main (D): 8 Ω, unbalanced Aux: 10 kΩ, 1 V
(D) Less than 0.5 dB, no load to full load, (T) Less than 1.0 dB, no load to full load
S/N Ratio
(Band Pass 20 - 20,000 Hz)
Tone defeat switch on
Megaphones
Output Regulation (1kHz)
Conference
Systesm
(D) 20 - 20,000 Hz, ±1 dB
(T) 20 - 15,000 Hz, ±1 dB, (T) 20 - 20,000 Hz, +1 dB, -3 dB
Frequency Response
Master volume min: 90 dB
Master volume max: 77 dB
Power amplifier only: 105 dB
Tone Controls
Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
8 Input gain control 1 Master gain control 1 Bass control
1 Treble control 1 Power ON/OFF switch 1 Tone defeat switch
1 Low-Cut switch (60 Hz, 6 dB/octave)
Controls
Self-protection, with AC fuse (inside)
Input No.1 to No.8: Card-edge connector
Bridging, Mixer preamp. output, Power amp. input, Aux output: RCA phono jack
Output: Screw-terminal strip
Mute, Remote VR: Screw-terminal strip
AC outlet: 3-pin grounding type
AC power cord/plug: SJT, 3-prong type
Connectors
Temperature Range
-10oC - +60oC (12oF - 140oF)
Finish
Black
Weight
17.20lbs (7.8kg)
16.54” (W) x 3.90” (H) x 14.09” (D)
420 × 99.1 × 358 mm
21.16lbs (9.6kg)
Accessories
Volume control cover (YA-920) x 4
Option
Rack mounting bracket (MB-25B)
25.13lbs (11.4kg)
Reference
Dimensions (W×H×D)
16.54” (W) x 3.90” (H) x 12.52” (D)
420 × 99.1 × 318 mm
Intercom
1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED
Protection
Security
& Safety
Indicators
TOA Electronics, Inc. 32
Microphones
900 Series Amplifiers
Wireless
Systems
vPower Amplifier (UL version)
P-906MK2 UL
P-912MK2 UL
P-924MK2 UL
60W
120W
240W
Rack Mount Equipment,
Network Audio and Others
• Modular single channel power amplifiers for paging, background/ foreground music distribution and music/messaging-on-hold
• Input module slot accepts most TOA plug-in modules for custom system configurations
• Direct low-impedance output mode bypasses output transformer
• Direct input for connecting an external mixer or other source
• Selectable input sensitivity to accommodate high or low input levels
• Low cut switch to limit low frequency response
• Optional rack-mount kits: P-906/P-912MK2 UL: MB-25B (2 RU); P-924MK2 UL: MB-35B (3 RU)
P-906MK2 UL
P-912MK2 UL
Mixers
Type
P-924MK2 UL
Power amplifier
Power Requirement
AC mains, 120 V, 60 Hz
Power Consumption
100 W
180 W
120 V / 3 A
Output Power
60 W RMS
120 W RMS
(D) 240 W RMS
(T) 220 W RMS
(D) 20 - 20,000 Hz, 0.5% THD
(T) 50 - 20,000 Hz, 0.5% THD
Amplifiers
Power Band Width
(D) 20 - 20,000 Hz, ±1 dB
(T) 20 - 15,000 Hz, ±1 dB, (T) 20 - 20,000 Hz, +1 dB, -3 dB
Frequency Response
T.H.D.
0.01% at 1 kHz, rated output
Inputs
One Input Port: Port accepts any input module except T-01
One Direct Input
(Use of direct input prohibits use of modular input port.)
Speakers
Input Port: 100 mV or 1000 mV (switchable)/10 kΩ
Direct Input: 100 mV or 1000 mV (switchable)/10 kΩ
Input Sensitivity /Impedance
Outputs
Main (T): 8 Ω, 25 and 70 volts, balanced
Main (D): 4 Ω, unbalanced
Output Regulation (1kHz)
(D) Less than 0.5 dB, no load to full load
(T) Less than 1.0 dB, no load to full load
Conference
Systesm
S/N Ratio
(Band Pass 20 - 20,000 Hz)
Input level switch in 0 dBV (1000 mV) position: 108 dB
Input level switch in -20 dBV (100 mV) position: 90 dB
Controls
1 Input gain control, 1 Input level switch, 1 Power ON/OFF switch, 1 Low-Cut switch
Indicators
1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED
Protection
Megaphones
Input: Card-edge connector and screw-terminal strip
Output: Screw-terminal strip
AC outlet: 3-pin grounding type
AC power cord/plug: SJT, 3-prong type
Connectors
Temperature Range
-10oC - +60oC (12oF - 140oF)
Finish
Black
16.54” (W) x 3.9” (H) x 14.09” (D)
420 (W) × 99.1 (H) × 358 (D) mm
Dimensions (W×H×D)
Intercom
Weight
Accessory
Option
Self-protection with 2 AC fuses (inside),
plus 2 DC fuses
Self-protection, with AC fuse (inside)
20.06lbs (9.1kg)
24.03lbs (10.9kg)
16.54” (W) x 6” (H) x 13.16” (D)
420 (W) × 151.3 (H) × 334.2 (D) mm
43lbs (19.5kg)
Volume control cover (YA-920) x 1
Rack mounting bracket (MB-25B)
Rack mounting bracket (MB-35B)
(T)=Transformer (D)=Direct
Security
& Safety
Reference
33
TOA Electronics, Inc.
Microphones
900 Series Amplifiers
vMicrophone Input with Mute-Receive
M-11S T
• For unbalanced, high impedance mics
• High and low cut filters for tone control
• Connector: 1/4” phone jack
Rack Mount Equipment,
Network Audio and Others
• For balanced, low impedance microphone
• High and low cut filters for tone control
• Phantom power for condenser-type microphones
• Connectors: female XLR (M-01F), male XLR (M-01M), 1/4” phone jack
(M-01P), removable terminal block (M-01S T)
vMicrophone Preamplifier with Remote
Volume Control
M-21S
• For balanced, low impedance microphone
• High and low cut filters for tone control
• Phantom power for condenser-type microphones
• Allows remote control of input signal using an
external 10kohm linear-taper potentiometer
• Connector: screw terminal
vMicrophone Paging Input with Mute-Send
vMicrophone Input with Voice Gate
M-41S
M-51 Series
(M-51F/S T)
• For balanced, low impedance microphones
• For voice-activated over-ride of mute-receive modules
• High and low cut filters for tone control
• Phantom power for condenser-type microphones
• Signal at input terminals activates mute bus
• Connector: removable terminal block
Speakers
• For balanced, low impedance microphone
• High and low cut filters for tone control
• Phantom power for condenser-type microphones
• Responds to mute bus activation via mute send module or
switch-closure
• Two mute response modes: Normally-on (OFF during mute
activation) or Normally-off (ON during mute activation)
• Connector: removable terminal block
Mixers
M-03P
Amplifiers
M-01 Series
(M-01F/M/P/S T)
• For balanced, low impedance microphones
• Low cut filter for tone control
• Phantom power for condenser-type microphones
• Gate function keeps module muted until input signal exceeds threshold
• Connectors: female XLR (M-51F), removable terminal block (M-51S T)
vMicrophone Input with Compressor
vMic/Line Input w/Mute/Send Receive
M-61 Series
(M-61F/S T)
ML-11
Reference
Security
& Safety
Intercom
• Switchable mic/lin input
• Adjustable Mute-Send threshold (VOX sensitivity)
• For balanced, low impedance microphones
• High and Low Cut Filters
• High and low cut filters for tone control
• Combination Mute Send and Receive function
• Phantom power for condenser-type microphones
• Assign mute send or receive to each mute bus
• Compressor function prevents overload and distortion
• Connectors: female XLR (M-61F) or removable terminal block (M-61S T)
Conference
Systesm
vHigh Impedance Microphone Input
Megaphones
vMicrophone Input Modules
Wireless
Systems
900 Series Modules
TOA Electronics, Inc. 34
Microphones
900 Series Amplifiers
Wireless
Systems
900 Series Modules - Line Input Modules
Rack Mount Equipment,
Network Audio and Others
vBalanced Line Input
vBalanced Line Input with Mute-Receive
B-01 Series
(B-01F/S)
B-11S
• For balanced or unbalanced line level sources such as
mixer outputs, signal processors and wireless microphone receivers
• Transformer isolation (10kΩ)
• Connector: female XLR (B-01F), removable terminal block (B-01S)
Mixers
Amplifiers
Speakers
vBalanced Line Input with Remote Volume Control
vBalanced Line with Input with Mute-Send
B-21S
B-41S
• For balanced or unbalanced, line level equipment such as
tuners, tape decks and CD players
• Transformer isolation (10kΩ)
• Allows remote control of input signal using an external 10k ohm
linear-taper potentiometer
• Connector: screw terminal
• For balanced or unbalanced, line level equipment
• For signal-active over-ride of mute-receive modules
• Transformer isolation (10kΩ)
• Signal at input terminals activates mute bus
• Connector: removable terminal block
• Recommended for phone paging applications
vLine Matching Input
vLine Matching Input with Mute-Receive
L-01 Series
(L-01F/S)
L-11S
Conference
Systesm
• For applications requiring 600Ω line-matching
• Transformer isolation (600Ω)
• Connector: female XLR (L-01F); removable terminal block (L-01S)
• For applications requiring 600Ω line-matching
• Responds to mute bus activation
• Transformer isolation (600Ω)
• Responds to mute bus activation via mute send
module or switch-closure
• Connector: removable terminal block
vLine Matching Input with Mute-Send
vUnbalanced Line Input
L-41S
U-01 Series
(U-01F/P/R/S)
Megaphones
• For applications requiring 600 Ω line-matching
• Responds to mute bus activation
• Transformer isolation (600Ω)
• Signal at input terminals activates mute bus
• Connector: removable terminal block
Intercom
Security
& Safety
• For unbalanced, line level sources such as tuners, cassette
decks, CD players, computer sound cards, jukeboxes, mixers
and satellite receivers
• Use for adjacent sources (less than 15ft from the host unit)
• Connectors: female XLR (U-01F), 1/4” phone jack (U-01P),RCA jack
(U-01R), removable terminal block (U-01S)
vUnbalanced Line Input with High/Low Cut Filters
vUnbalanced Line Input with Mute-Receive
U-03 Series
(U-03R/S)
U-11 Series
(U-11R/S)
• For unbalanced, line level sources such as tuners,
cassettedecks, CD players, computer sound cards,
jukeboxes,mixers and satellite receivers
• Use for adjacent sources (less than 15ft from the host unit)
• High and low cut filters for tone control
• Connectors: dual RCA jack w/ passive summing (U-03R),
removable terminal block (U-03S)
• For unbalanced, line level sources such as tuners, cassette
decks, CD players, computer sound cards, jukeboxes, mixers and
satellite receivers
• Use for adjacent sources (less than 15ft from the host unit)
• Responds to mute bus activation via mute send module or
switch-closure
• Connectors: RCA jack (U-11R), removable terminal block (U-11S)
Reference
35
• For balanced or unbalanced line level sources such as mixer
outputs, signal processors and wireless microphone receivers
• Transformer isolation (10kΩ)
• Responds to mute bus activation via mute send module or
switch-closure
• Connector: removable terminal block
TOA Electronics, Inc.
Microphones
• For unbalanced, line level sources such as tuners, cassette decks, CD
players, computer sound cards, jukeboxes, mixers and satellite receivers
• Use for adjacent sources (less than 15ft from the host unit)
• High and low cut filters for tone control
• Responds to mute bus activation via mute send moduleor switch-closure
• Connectors: dual RCA jack w/passive summing (U-13R), removable
terminal block (U-13S)
vDual Input Priority Module w/AGC
vUnbalanced Line Input with Remote Volume Control
U-14R
U-21S
• Dual input module for applications with business music
plus an on-premises CD jukebox or other source
• Two line inputs – Jukebox and BGM
• Auto-mute function with adjustable mute threshold (jukebox
overrides BGM)
• Automatic Gain Control (AGC) on jukebox input for consistent
signal levels
• Individual input level controls
• Stereo-summing dual RCA jacks
• For unbalanced, line level sources such as tuners,
cassette decks, CD players, computer sound cards,
jukeboxes, mixers and satellite receivers
• Use for adjacent sources (less than 15ft from the host unit)
• Allows remote control of input signal using an external 10kΩ
linear-taper potentiometer
• Master Remote Volume mode
• Connector: screw terminal
vUnbalanced Line Input with High/Low Filters and
Mute-Send
vUnbalanced Line Input with Compressor
• For unbalanced, line level sources such as tuners, cassette decks,
CD players, computer sound cards, jukeboxes, mixers and satellite
receivers
• Use for adjacent sources (less than 15ft from the host unit)
• High and low cut filters for tone control
• Signal at input terminals activates mute bus
• Connectors: dual RCA jack w/ passive summing (U-43R),
removable terminal block (U-43S)
U-61S
• For unbalanced, line level sources such as tuners,
cassette decks, CD players, computer sound cards,
jukeboxes, mixers and satellite receivers
• For adjacent sources (less than 15ft from the host unit)
• Compressor function prevents overload and distortion
• Master compressor mode
• Connector: removable terminal block
Megaphones
U-43 Series
(U-43R/S)
vEqualization for TOA Speakers
vEqualization for TOA Speakers
E-03R
(F-122CU)
E-04R (H-1),
E-05R (H-2/H-2WP),
E-07S (FB-120 and HB-1)
• Optimized preset equalization curve for TOA speakers
• Connects between pre-amp output and power amp input (except E-07S)
• Dual RCA cable included
• Connector: dual RCA (in/out); removable terminal block (E-07S)
* The E-07S is a low-pass-filter output module with a mix
bus output to drive a dedicated external subwoofer amplifier
Reference
• Optimized preset equalization for F-122CU speakers
• Connects between pre-amp output and power amp input
• Low pass output filter for powered subwoofer
• Subwoofer output is balanced or unbalanced
• Subwoofer phase can be changed
Intercom
900 Series Modules - Line Input Modules
Security
& Safety
• For unbalanced, line level sources such as tuners, cassette
decks, CD players, computer sound cards, jukeboxes, mixers
and satellite receivers
• Use for adjacent sources (less than 15ft from the host unit)
• Responds to mute bus activation via mute send module or
switch-closure
• Adjustable depth provides “ducking” rather than full muting
• Connector: removable terminal block
Wireless
Systems
U-13 Series
(U-13R/S)
Rack Mount Equipment,
Network Audio and Others
U-12S
Mixers
vUnbalanced Line Input with High/Low Cut Filters and
Mute-Receive
Amplifiers
vUnbalanced Line Input with Variable
Mute-Receive Depth
Speakers
900 Series Modules - Line Input Modules
Conference
Systesm
900 Series Amplifiers
TOA Electronics, Inc. 36
Microphones
900 Series Amplifiers
Wireless
Systems
900 Series Modules - Line Input Modules
Rack Mount Equipment,
Network Audio and Others
vEqualization for TOA Speakers
vNoise Generator
E-06R
(H-3/H-3WP)
NM-01
Mixers
Amplifiers
Speakers
• Optimized preset equalization for H-3/H-3WP speakers
• Connects between pre-amp output and power amp input
• Generates band-limited pink noise for use in sound
masking applications
• In/Out processor loop for external EQ
• Compatible with Toa modular mixer-amps (BG-1000/2000,
700, 900MkII, 9000M2)
v1 kHz Sine Wave Test Tone
vBuzzer/Yelp Tone Generator
S-01S
S-02S
• Generates 1 kHz sine wave tone via switch-closure
• Ideal as a test tone for the audio system
• Connector: removable terminal block
• Generates buzzer or yelp tones via switch-closure
• Connector: removable terminal block
vSwitch-Selectable Tone Generator
vSIP Module
S-04S
SP-11N
• Generates one of eight tones via switch-closure
• Single or continuous tone activation
• Connector: removable terminal block
• Settings can be done via browser with a PC connected to
the network
• Five dry contact outputs can be activated by the dial operation on the phone while the communication is established
• Priority function is available
• Requires AD-1210P 12VDC Power supply, order kit referred
as SP-11NPS
vBalanced Line Output
vUnbalanced Line Input with Music-On-Hold
Output
T-01S
Conference
Systesm
• Transformer-Isolated line output of the mixing bus
signal to feed other remote mixers, amplifiers, and
tape recorders
• Output level control
• Connector: removable terminal block
Megaphones
vUnbalanced Line Input with Music-On-Hold
Output and Input Mute-Receive
T-12S
Intercom
• Unbalanced line input for AM/FM tuners, cassette decks,
CD players, computer sound cards, jukeboxes, mixers and
satellite receivers
• Balanced transformer-isolated uninterrupted output of
module’s input signal
• Output level control for adjusting the MOH output signal level
• Responds to mute bus activation via mute send module
orswitch-closure
• Connector: screw terminal
Security
& Safety
vTwo Input Expander Kit
WE-2
Reference
• Two input expander kit (W-906A, W-912A)
[Requires 900 series modules]
37
TOA Electronics, Inc.
T-02S
• Unbalanced line input for AM/FM tuners, cassette decks,
CD players, computer sound cards, jukeboxes, mixers and
satellite receivers
• Balanced transformer-isolated uninterrupted output of
module’s input signal
• Output level control for adjusting the MOH output signal level
• Connector: screw terminal
vRemote Master Volume Control (VCA) Module
V-01S
• Voltage Controlled Amplifier (VCA) for applications
requiring preset remote master volume control
• Line input and output connect to host amplifier’s pre-amp
output and power amp input
• 24 VDC output and control input interfaces directly to RDL
RLC3 remote level control
• RCA and phoenix-style connectors
• For 10k potentiometer volume control, use U-21S
Microphones
A-700 Series Mixer Power Amplifiers
A-712
A-724
120 V AC, 60 Hz
Rated Output
60 W
120 W
240 W
Power/Current Consumption
155 W (rated output), 68 W (based on
UL60065), under 250 mA (when power switch
is OFF)
285 W (rated output), 110 W (based on
UL60065), under 400 mA (when power switch
is OFF)
565 W (rated output), 215 W (based on
UL60065), under 60 mA (when power switch
is OFF)
Frequency Response
50 - 20,000 Hz (±3 dB)
Distortion
Under 2% at 1 kHz, rated power
Input
REC OUT: 0 dB*, 600 Ω, unbalanced, RCA jack
PRE AMP OUT: 0 dB*, 600 Ω, unbalanced, RCA jack
SPEAKER OUT: 70 V line (83 Ω), 25 V line (10 Ω), and 4 - 16 Ω, removable terminal block (4 pins)
Output
Phantom Power (+23 V DC)
ON or OFF for each INPUT 1 - 6 (MIC input) with switch setting
S/N Ratio
(Band pass: 20 - 20,000 Hz)
Over 55 dB (INPUT 1 - 6, mic trim volume: max., 600 Ω terminated)
Over 70 dB (INPUT 1 - 6, mic trim volume: min., 600 Ω terminated)
Over 76 dB (Master volume: max.)
Over 90 dB (All input volume: min.)
Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz
Control Input
REMOTE VOLUME: Removable terminal block
POWER REMOTE: No-voltage make contact input, open voltage: under 14 V DC, short-circuit: under 0.5 mA, removable terminal block
MUTE CONTROL: No-voltage make contact input, open voltage: under 17 V DC, short-circuit: under 1.5 mA, removable terminal block
Indicator
5-point LED output level meter, Power indicator LED
-10oC to +40oC (14°F to 104°F)
Finish
Panel: ABS resin, black, hair line Case: Steel plate, black
Accessory
Option
16.53” (W) x 4.24” (H) x 13.84” (D) / 420 (W) × 107.7 (H) × 351.5 (D) mm
21lbs (9.5kg)
26lbs (12kg)
30lbs (13.5kg)
AC power cord (6.6ft/2m) x 1, Removable terminal plug (3 pins) x 6, Removable terminal plug (4 pins) x 1,
Removable terminal plug (6 pins) x 1, Volume control cover x 4
Rack mounting bracket: MB-25B, Input transformer: IT-450, Volume control cover: YA-920
* 0 dB = 1 V
Reference
Dimensions
Weight
Intercom
Tone Control
Operating Temperature
Rack Mount Equipment,
Network Audio and Others
Conference
Systesm
INPUT 1 - 6: -70 to -50 dB*, 600 Ω (MIC)/ -10 dB*, 600 Ω (LINE)
INPUT 1: Transformer-balanced, removable terminal block (3 pins)
INPUT 2 - 6: Electronically-balanced, removable terminal block (3 pins)
INPUT 7 - 8 (LINE): -20 dB*, 10 kΩ, unbalanced, RCA jack
MODULE: -20 dB*, 10 kΩ
PWR AMP IN: 0 dB*, 10 kΩ, unbalanced, RCA jack (An equalizer or other signal
processor connectable between PRE AMP OUT and PWR AMP IN terminals)
Megaphones
A-706
Power Source
Mixers
• Nine channel integrated mixer/amplifiers for paging and background/foreground music distribution
• Proven TOA quality and reliability with wide frequency response, very low noise and distortion, and excellent output regulation
• Six Mic/Line inputs, balanced, with mic trim, 23 VDC phantom power and removable terminal block connector
• Two Auxiliary inputs, unbalanced, with dual-RCA jacks for convenient connection of stereo sources
• Module slot accepts 900 Series plug-in modules with additional features
• Transformer-isolation for telephone paging applications (Input #1) (optional on additional channels)
• 25 V, 70.7 V and 4 ohm speaker outputs with removable terminal block connector
• Auto-mute priority function assignable via external switches: Channels 1-3 and Module configurable as Mute Send; Channels 1-8 and Module
configurable as Mute Receive
• Auto-mute sense control for adjusting mute activation threshold
• External mute terminals for activating mute function with external switch-closure
• Remote AC turn-on for activating power with an external switch-closure
• Turn-On delay disconnects output during power-up
• Over-current and thermal protection circuitry prevents potential damage from overloads, short-circuit and overheating
• Optional rack-mount kit, model MB-25B (2 RU)
• UL/cUL Listed
Amplifiers
120W
240W
Speakers
60W
Security
& Safety
A-706
A-712
A-724
Wireless
Systems
vA-700 Series Mixer Power Amplifiers
TOA Electronics, Inc. 38
Microphones
BG-2000 Series Mixer Power Amplifiers
Wireless
Systems
v BG-2000 Series Mixer/Amplifiers
BG-2035
BG-2060
BG-2120
35W
60W
120W
Rack Mount Equipment,
Network Audio and Others
• Compact five channel Mixer-Amplifier for paging, background/foreground music distribution and music/messaging-on-hold
• All inputs/outputs with removable terminal blocks allow quick and easy installation
• Any of five inputs assignable to MOH/ZONE 2 output
• RCA pin jacks for Lines 2 and 3
• Line 2 and 3 inputs equipped with summing RCA jacks
• Phantom Power (+ 24V DC) incorporated for MIC input
• Module slot accepts optional 900 Series plug-in modules for custom system configurations
• Rear panel-mounted DIP switches allow easy configuring of settings
• Provides auto/manual mute function with adjustable muting sensitivity
• Incorporates Remote volume control connection
• 2-channel broadcast capability together with zone 2 expansion capability in conjunction with BA-200 Series
• Tamper-proof, front-panel bass and treble controls are recessed to protect their settings
• Thermal protection circuitry prevents potential damage from excessive heat build-up
• AC Mains Circuit Breaker
• Supplied accessory security knobs for volume controls prevent unauthorized volume setting changes
• Optional rack-mount kit (MB-1000)
• UL/cUL Listed.
Mixers
Amplifiers
BG-2035
BG-2060
Power Source
BG-2120
120 V AC, 60 Hz
Speakers
Rated Output
35 W
60 W
120 W
Power Consumption
94 W (rated output), 50 W (based on UL/CSA
standards)
163 W (rated output), 80 W (based on UL/
CSA standards)
265 W (rated output), 120 W (based on UL/
CSA standards)
Frequency Response
50 - 20,000 Hz
Total Harmonic Distortion
Conference
Systesm
Input
Output
Megaphones
Output Regulation
S/N Ratio
0.05%, at 1 kHz, rated output
Mic: -60 dB*, 600 Ω, electronically balanced, removable terminal block
Line 1: -10 dB*/ TEL: -20 dB*
Line 1/TEL selectable, 10 kΩ, electronically balanced, removable terminal block
Line 2, 3: -10 dB*, 10 kΩ, unbalanced, removable terminal block and RCA jacks
Module
Speaker: 4 Ω, 25 V (18 Ω), 70 V (140 Ω), balanced, removable terminal block; MOH: 0 dB*,
600 Ω, balanced, removable terminal block;
Line: 0 dB*, 600 Ω, unbalanced, removable
terminal block
Speaker: 4 Ω, 25 V (10 Ω), 70 V (83 Ω), balanced, removable terminal block; MOH: 0 dB*,
600 Ω, balanced, removable terminal block;
Line: 0 dB*, 600 Ω, unbalanced, removable
terminal block
2 dB or less, no load to full load (1 kHz)
Mic: 60 dB or more, Line 1/TEL, Line 2, 3, Module: 75 dB or more (Band Pass: 20 Hz - 20 kHz, Tone Controls: Centered)
Muting
Tone Controls
Control
Intercom
Indicator
Manual mute/Automatic mute
Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Mic gain control, Line 1/TEL gain control, Line 2 gain control, Line 3 gain control, Module gain control, Bass tone control, Treble tone control,
MOH out gain control, Mute control (Manual mute), Remote volume control, Mute sense control, Line 1/TEL selector switch, Phantom power
switch (Mic), Auto mute switch (Mic, Line 1/TEL, Module), Mute receive switch (Mic, Line 1/TEL, Line 2, 3, Module), MOH assign switch (Mic,
Line 1/TEL, Line 2, 3, Module), Power ON/OFF switch
Power LED, Signal LED, Peak LED
Other Feature
Automatic electronic drive limiter
Operating Temperature
Operating Humidity
Finish
Security
& Safety
Dimensions
Weight
Accessory
Option
Speaker: 4 Ω, 25 V (5.2 Ω), 70 V (42 Ω), balanced, removable terminal block; MOH: 0 dB*,
600 Ω, balanced, removable terminal block;
Line: 0 dB*, 600 Ω, unbalanced, removable
terminal block
0° C to +40° C (32° F to 104° F)
35% to 80% RH (no condensation)
Panel: ABS resin, black Case: Steel plate, black, paint
10.39” (W) x 3.71” (H) x 10.52” (D) / 264 (W) × 94.3 (H) × 267.3 (D) mm
11.68lbs (5.3kg)
13.23lbs (6kg)
Volume control cover: YA-920 x 5, Removable terminal plug (2 pins) x 4, Removable terminal plug (3 pins) x 2, Removable terminal plug (4 pins)
x 1, Removable terminal plug (5 pins) x 1
Rack mounting bracket: MB-1000
*1 0 dB = 1 V
Reference
*2 Distance between barriers on the above screw terminal: 6 mm
39
TOA Electronics, Inc.
Microphones
The BG-2240D-AM represents the most powerful model to date in the BG-2000 Series. Sporting a Class D amplifier section, the BG-2240D-AM
is more efficient and cooler running than conventional amplifiers and is also lighter weight (nice if you plan on placing in on a shelf). Beyond these
upgrades, the BG-2240D-AM has the same basic feature set as the other BG-2000 models. Ideal for single zone BGM/Paging applications where
more power is needed but with minimal input requirements.
vClass D Mixer/Amplifier
Rack Mount Equipment,
Network Audio and Others
240W
BA 200 Series PA Amplifiers
vPower Amplifier
BA-235
BA-260
35W
60W
• Ideal for background music and paging applications
• 2-channel broadcast possible for system expansion as required through
MOH/ZONE 2 output on BG Series Amplifiers
• Tamper-proof bass and treble controls preserve system settings
• Security knobs for volume control included
• Remote master volume control possible by usingg an external volume control
• RCA line input jacks
• Thermal protection circuits against overheating
• Meets UL/cUL regulations
• Optional rack kits: MB-25B-BK (2 RU) and MB-25B-J (two units, 2 RU)
CA Series Mobile Mixer Amplifiers
vMobile Mixer Amplifiers
CA-115
CA-130
CA-160
15W
30W
60W
• Mobile mixer/amplifiers for remote applications
• 12 VDC powered
• Two microphone inputs with volume controls
• Supports 4 or 8 ohm speaker loads
• Handheld microphone included - unidirectional, dynamic-type with talk
switch, 6’ cord and mounting hardware
• Auxiliary input for connecting an external CD player, radio, tape deck or tone
generator
• Mounting hardware included - mounts under dashboard or into standard
DIN-size console cutout
• Applications: Automobiles; Boats; Buses; Construction Vehicles; Emergency
Vehicles; Law Enforcement Vehicles; Parade Floats; Theme Park Rides
TOA Electronics, Inc. 40
Speakers
35W
Conference
Systesm
20W
Megaphones
BG-220
BG-235
• Ideal for background music and paging applications
• 2-channel broadcasts possible for system expansion as required through
MOH/ZONE 2 output on BG Series Amplifiers
• Tamper-proof bass and treble controls preserve system settings
• Security knobs for volume control included
• Any of 3 inputs can be assigned to MOH/ZONE 2 output
• Line 2 and 3 outputs equipped with RCA pin jacks
• Line 2 and 3 inputs equipped with summing RCA jacks
• Automatic Mute sensing control to set mute activation threshold and manual
mute function also provided
• Removable terminal blocks and rear-mounted DIP switches for fast and easy
installation/setup
• Thermal protection circuits against overheating
• Meets UL/cUL regulations
• Optional rack and wall-mount kits: MB-25B-BK (2 RU) and MB-25B-J (two
units, 2 RU)
Intercom
vMixer Amplifier
Security
& Safety
BG 200 Series PA Amplifiers
Amplifiers
Mixers
• 240W output @ 70V
• Dual balanced priority mic/line inputs
• Dual unbalanced line inputs for BGM sources
• Assignable 2nd zone/MOH output
• Front panel bass & treble controls
• Remote volume control port
• Assignable mute function
• Module option slot (accepts any of a range of compatible 900 Series input & special function modules)
Reference
BG-2240D-AM
Wireless
Systems
BG-2000 Series Mixer Power Amplifiers
Microphones
Digital Power Amplifiers
High reliability
Wireless
Systems
vDual-Channel Power Amplifier
DA-250D
DA-250DH
• The DA amplifier has a comprehensive protection circuitry for protection
against excessive current flow due to overload, short circuit, unusual DC
voltage output, and power amplifier heat sink temperature rise ( over
100°C), temperature rise inside the unit (over 80°C).
v4-Channel Power Amplifier
• Installation has become much easier thanks to the light-weight design.
Rack Mount Equipment,
Network Audio and Others
Amplifier with lightweight design
DA-250F
DA-250FH
High efficiency
• Extremely high amplification efficiency of 80-90%, resulting in reduction in
power consumption by more than 60% compared with Class-AB amplifiers.
Highly durable
• Stands up to extended hours of operation. The DA amplifier has undergone
a large number of rigorous tests to prove its durability. In addition,TOA has
been conducting a “non-stop driving test” of the DA Series.
Mixers
v4-Channel Power Amplifier
DA-550F
DA-500F-HL
Compact design
Amplifiers
• The DA-250 Series is 1-unit size, and they can be efficiently mounted on a
rack, so they require only a small installation space. Because the amplifiers
do not generate much heat, 5 units can be stacked together in a rack.
Independent power supply
Speakers
• DA-250D
• 2x 250W (8 Ω)
• 2x 170W (8 Ω)
• DA-250F
• 4x 250W (4 Ω)
• 4x 170W (8 Ω)
• 2x 500W bridged (8 Ω)
• Limiter
• DA-500F-HL
• 4x 500W (70V)
• 4x 550W (8 Ω)
• 4x 100W (4 Ω)
• 2x 1000W bridged (140V)
• 2x 1000W (16 Ω)
• DA-250DH
• 2x 250W (70V)
• 1x 500W bridged (140V)
• High pass filter
• DA-250FH
• 4x 250W (70V)
• 2x 500W bridged (140V)
• Limiter and High pass filter
• DA-500F
• 4x 550W (4 Ω)
• 4x 350W (8 Ω)
• 2x 1000W (8 Ω)
Conference
Systesm
DA-250D
DA-250DH
• Each of the channels has its own power supply. If the power supply of
Channel 1 should fail, this won’t affect the operation of Channel 2. It is also
possible to use either channel as a spare amplifier.
DA-250F
Power Source
DA-250FH
DA-550F
DA-500F-HL
120V AC, 50/60Hz
Number of Channels
2
4
Power Consumption*
Rated power consumption
Megaphones
1kHz 8 ohms
420W, 5.9A
--
850W, 11.7A
--
1650W, 22.4A
2600W, 33.2A
4 ohms
650W, 8.7A
--
1300W, 16.9A
--
2800W, 35.5A
580W, 9.1A
70 Volts
--
580W, 7.8A
--
1200W, 15.9A
--
2350W, 30.4A
S/N Ratio (A weighted)
100dB
Crosstalk at 10kHz
(A weighted)
70dB
Intercom
Input impedance
10kΩ (unbalanced), 20kΩ (balanced)
Input sensitivity
+4dB (1.23V)
Input clipping
Security
& Safety
Rated Output
14V (25.1dBu)
2 channels: 250 W x
2 (4 Ω),
170 W x 2 (8 Ω)
1 channel (BRIDGE):
500 W (8 Ω)
2 channels: 250 W x 2
(70 V line, 19.6 Ω)
1 channel (BRIDGE):
500 W (140 V line,
39.2 Ω)
12V (23.8dBu)
4 channels: 250 W x
4 (4 Ω),
170 W x 4 (8 Ω)
2 channels (BRIDGE):
500 W x 2 (8 Ω)
4 channels: 250 W x 4
(70 V line, 19.6 Ω)
2 channels (BRIDGE):
500 W x 2 (140 V line,
39.2 Ω)
4 channels: 550 W x
4 (4 Ω),
350 W x 4 (8 Ω)
2 channels (BRIDGE):
1,100 W x 2 (8 Ω)
4 channels: 500 W x 4
(70 V line, 9.8 Ω),
550 W x 4 (8 Ω), 100 W
x 4 (4 Ω)
2 channels (BRIDGE):
1,000 W x 2 (140 V line,
19.6 Ω),
1,100 W x 2 (16 Ω)
M4 screw terminal, distance between barriers: 8.8 mm (0.35”)
Protection Circuit
Amplifier section
DC output, overheat protection, load shorting, overload current, maximum output
Reference
Power supply section
Dimensions
Weight
Overheat protection, AC rush current
482 (W) × 44 (H) × 401.8 (D)mm (19” x 1.7” x 15.8” )
6.6kg (14.5 lbs)
5kg (11 lbs)
482 (W) × 88.4 (H) × 404.2 (D)mm (19”x3.5”x15.9”)
8.8kg (19.4 lbs)
* 0dB=0.775Vrms
41
TOA Electronics, Inc.
Microphones
Speakers
vClean Room Ceiling Speaker
PC-3CL
PC-5CL
• Clean room / shower room speaker
• For humid or high temperature areas
• IP64 certified weatherproof construction
• Resistant against formalin and iodine solutions
• Wide temperature range of -4ºF to 140ºF
• Fits in 100 mm holes
• Sealed high-molecular speaker membrane to prevent
floating dust particles from contaminating the environment
• Resistant against formalin
• Wide temperature range -4ºF to 131ºF
• Fits in 98mm holes
PC-3CL
PC-5CL
Rated Input (100V line)
3W
5W
Rated Impedance
100V line: 3.3kΩ/3W, 10kΩ/1W
70V line: 3.3kΩ/1.5W, 10kΩ/0.5W
100V line: 2 kΩ(5W)
70V line: 2 kΩ(2.5W)
Sensitivity (1W, 1m)
87 dB
Frequency Response
150 – 20k Hz
Frame: Alloy-coated ABS resin/Grille: Stainless steel punching net
Panel: Alloy-coated ABS resin/Enclosure: ABS resin, off-white/
Punching net: Stainless steel/Exposed fixing screw: Stainless steel
Dimensions
139 x 104.5 (D)mm
116 x 110 (D) mm
Weight
550g
620 g
Operating Temperature
20ºC to 60ºC
-20°C to +55°C
vCeiling Mount Speaker
Optional Accessories
PC-580RU
PC-580RVU
vBack Box
LBS8-R1-AM
vTile Rail
Q-HY-TB2
PC-580RU
Conference
Systesm
• 8” in-ceiling speaker for high quality applications
• 25V & 70V transformer taps up to 5W
• Fits standard ceiling speaker template (PC-671R & others) perfect for retrofits
• Unique “monocoque” design provides better structural integrity
• High-performance, cost effective ceiling speaker for use in mass notification
systems, voice evacuation, emergency paging and everyday paging and
background music
• Meets UL 2572 (UL 1480 UUMW) (Fire alarm signaling) and UL 2043 (use in
air handling spaces) when using the HY-BC580U back can
vTile Bridge
HY-BC580U
PC-580RVU
Rated Input (100V line)
10W (speaker), 5 W (transformer, 70.7 V line and 25 V line)
70.7V line: 20K (0.25W), 10K, (0.5W), 5K (1W), 2.5K (2W), 1K (5W) Ω
25V line: 2.5K (0.25W), 1.25K (0.5W), 625 (1W), 312.5 (2W), 125 (5W) Ω
Rated Impedance
Frequency Response
50 - 16.5 kHz
Speaker Component
200mm (8”) dual cone type
Intercom
97 dB
Baffle: Steel plate, white
Grille: Surface-treated steel plate net, white
Finish
Dimensions
Dia. 324 x 87.3 (d) mm (12.8” x 3.4”)
Dia. 324 x 87.3 (d) mm (12.8” x 3.4)
Weight
1.50 kg (3.31 lbs)
1.52 kg (3.35 lbs)
UL Standards
Optional Accessories
UL 2572 (ULC S541, UL 1480 UUMW) and UL 2043 when used with HY-BC580U
Back can (for UL/ULC certified installation): HY-BC580U
Tile rail, Q-HY-TB2; Tile bridge, LBS8-R1-AM
vFlush Mount Type Ceiling Speakers
PC-648R
PC-2369
• Spring clamp mechanism for easy
speaker mounting to the ceiling
• High cost performance
• PP Resin, SECC punching net
• Speaker designs that harmonize with the venue’s architecture and decor
• Quick and easy installation thanks to new SUS spring clamp installation
method
• Wide frequency response
• Greater variety of ceiling speaker diameters (5”, 6”, 8” (12, 16, 20cm))
• Thin panel does not clash with interior design
TOA Electronics, Inc. 42
Security
& Safety
Sensitivity (1W, 1m)
Speakers
Finish
Amplifiers
98 mm
8 cm cone-type
Megaphones
100 mm
Speaker Component
Reference
Mounting Hole Diameter
Mixers
vSplashproof Ceiling Speaker
Rack Mount Equipment,
Network Audio and Others
Wireless
Systems
Ceiling Speakers
Microphones
Combination Type Reflex Horn Speakers
Wireless
Systems
Rack Mount Equipment,
Network Audio and Others
vWide Range Horn Speaker
vWide Range Horn Speaker
CS-64
CS-64U*
CS-154/CS-154U*
CS-304/CS-304U*
• Wide-range paging speaker for voice paging, background
music and tone signaling distribution
• Exponential horn improves directivity characteristics and
ensure uniform and clear sound dispersion
• Weatherproof polyurethane resin paint and impact-proof
lightweight ABS resin enclosure
• Stainless steel hardware protects the speaker from corrosion
• *UL 1460 UEAY listed
• Wide-range paging speaker for voice paging, background music and tone
signaling distribution
• Constant directivity horn improves directivity characteristics and ensure uniform and clear sound dispersion
• High sensitivity: up to 98 dB (1W/1m)IP65 certified weatherproof construction
• Weatherproof polyurethane resin paint and impact-proof lightweight ABS
resin enclosure
• Stainless steel hardware protects the speaker from corrosion
• *UL 1480 UEAY listed
Mixers
CS-64
CS-154
Rated Input (100V line)
6W
15W
CS-304
30W
Rated Impedance
100V line: 1.7kΩ, 3.3kΩ, 10kΩ
70V line: 830Ω, 1.7kΩ, 3.3kΩ, 10kΩ
100V line: 670Ω, 1kΩ, 2kΩ
70V line: 330Ω, 670Ω, 1kΩ, 2kΩ
100V line: 330Ω, 500Ω, 1kΩ
70V line: 170Ω, 330Ω, 500Ω, 1kΩ
Amplifiers
Sensitivity (1W, 1m)
96 dB
97 dB
98 dB
Frequency Response
130 – 13.000 Hz
150 – 15.000 Hz
120 – 15.000 Hz
Speaker Component
12cm cone-type (Treated for splash proof)
Finish
Horn, cover: ABS resin, off-white, paint; Bracket: Stainless steel
Punched net: Surface treated steel plate, dark-gray, powder coating
Dimensions
233 (W) x 224 (H) x 208 (D) mm
9.2 (W) x 8.8 (H) x 8.2 (D) in
Speakers
Weight
1.5kg (3.3lbs)
Dust/Water Protection
Equivalent to IPX4
12cm cone-type
Horn, cover: ABS resin, off-white, paint
Bracket: Stainless steel/Net: Aluminium, gray
366 (W) x 230 (H) x 272 (D) mm
14.4 (W) x 9.1 (H) x 10.7 (D) in
2.8kg (6.2lbs)
3.1kg (6.8lbs)
IP65
Conference
Systesm
vPaging Horn Speaker
vPaging Horn Speaker
vPaging Horn Speaker
SC-610
SC-610T
SC-615
SC-615T
SC-630
SC-630TU*
• Both high-impedance (70V/100V lines) models and low impedance (8Ω) models available
• Stainless steel brackets and hardware (screws, bolts), and powder-coated horn ensure superb weatherproofing and corrosion-resistance
• Shock-resistant aluminum oval horn
• IP65 certified weatherproof construction
• *UL 1480 UUMW version
Megaphones
SC-610
SC-610T
Rated Input (100V line)
Rated Impedance
SC-615
SC-615T
10W
70V line: 500Ω, 1kΩ,
2kΩ, 3.3kΩ, 10kΩ
8Ω
70V line: 330Ω, 670Ω,
1kΩ, 2kΩ, 3.3kΩ
8Ω
SC-630TU*
30W (8Ω)
30W
70V line: 170Ω, 330Ω,
670Ω, 1kΩ, 2kΩ
8Ω
Sensitivity (1W, 1m)
110 dB
112 dB
113 dB
Frequency Response
315 – 12,500 Hz
280 – 12,500 Hz
250 – 10.000 Hz
Finish
Horn flare: Aluminum, off-white, powder coating/Reflector horn: ABS resin, off-white/Bracket holder: Aluminum, gray, powder coating/Bracket: Stainless steel
Intercom
172 (W) x 161 (H) x 188 (D) mm
6.8 (W) x 6.3 (H) x 7.4 (D) in
Dimensions
Weight
1kg (2.2lbs)
1.2kg (2.6lbs)
222 (W) x 179 (H) x 234 (D) mm
8.8 (W) x 7 (H) x 9.2 (D) in
1.1kg (2.4lbs)
1.3kg (2.9lbs)
Dust/Water Protection
IP65
Operating Temperature
-20°C to +55°C
Security
& Safety
vPaging Horn Speaker
SC-651
Reference
43
SC-630
15W
TOA Electronics, Inc.
285 (W) x 227 (H) x 277 (D) mm
11.2 (W) x 8.9 (H) x 10.9 (D) in
1.7kg (3.7lbs)
2kg (4.4lbs)
SC-651
Rated Input (100V line)
50W
Rated Impedance
16Ω
Sensitivity (1W, 1m)
109 dB
Frequency Response
250 – 6,000 Hz
Finish
Horn flare: Aluminum, off-white, powder coating; Reflector horn: ABS resin, off-white;
Bracket holder: Aluminum, gray, powder coating; Bracket: Stainless steel
Dimensions
430 (W) x 297.5 (H) x 327 (D) mm (16.9 (W) x 11.7 (H) x 12.9 (D) in)
Weight
3.4kg (7.5lbs)
Dust/Water Protection
IP65
Operating Temperature
-20°C to +55°C
Microphones
vPublic Address Speaker
BS-678
BS-680FC
BS-680U*
• Stylish, compact and unobtrusive design
• Quick and easy installation, which saves time on setting-up
• Horizontal / vertical installation
• A push-type input terminal allows easy cable connections
and bridge wiring
• Ideally suited for BGM and announcements
• Quick and easy installation
• Innovative design based on the Golden Ratio (1:1.618)
• Strong all-metal body
• Horizontal / vertical installation
• Wall / in-wall mounting
• Ideally suited for voice alarm system application
• Two steatite screw terminal blocks and thermal fuse
• *UL 1480 UUMW version
BS-680FC
Rated Input (100V line)
6W
Rated Impedance
100V line: 1.7kΩ, 3.4kΩ, 6.7kΩ, 13kΩ/70V line: 1 .7kΩ, 3.4kΩ, 6.7kΩ, 13kΩ
100V line: 1.7kΩ, 3.3kΩ, 6.7kΩ, 13kΩ/70V line: 1.7kΩ, 3.3kΩ, 6.7kΩ, 13kΩ
Sensitivity (1W, 1m)
94 dB
96 dB
Frequency Response
Mixers
BS-678
Rack Mount Equipment,
Network Audio and Others
vPublic Address Speaker
Wireless
Systems
Wall Mount Box Speakers
150 – 20.000 Hz
Finish
Enclosure: Steel plate, off-white/Grille: Stainless steel punching net, off-white
Dimensions
250(W) x 190(H) x 110(D)mm [9.8(W) x 7.5(H) x 4.3(D)in]
310(W) x 190(H) x 87.2(D) mm [12.2(W) x 7.5(H) x 3.4(D)in]
Weight
1.7kg (3.7lbs)
2.6kg (5.7lbs)
BS-1034
BS-1034S
BS-1034
BS-1034S
Rated Input (100V line)
Rated Impedance
• Easy and quick installation
• Low profile, beautiful design due to
• the Golden Ratio (1: 1.618)
• Creates a distinctly different
• impression depending on whether it
• is installed horizontally or vertically
• Two colors selectable: off-white, which matches any interior
style, and silver, which adds a quality appearance
• Ideally suited for BGM and announcements
10W
100V line: 1kΩ, 2kΩ, 3.3kΩ, 10kΩ/70V line: 500Ω, 1kΩ, 2kΩ, 3.3kΩ, 10kΩ
Sensitivity (1W, 1m)
90 dB
Frequency Response
120 – 18,000 Hz
Speaker Component
Low: 12cm cone-type, High: Balance dome-type
Enclosure: HIPS resin, off-white
Grille: Steel plate net, off-white
Finish
Speakers
vWall-Mount Public Address Speakers
Amplifiers
16cm double cone-type
Enclosure: Wood, off-white or black
Grille: Surface-treated steel plate net, off-white or black
Dimensions
Enclosure: HIPS resin, silver
Grille: Steel plate net, silver
210(W) x 330(H) x 80(D)mm [8.3(W) x 13(H) x 3.1(D)in]
Weight
1.4kg (3.1lbs)
vMusic/Paging Speakers
Conference
Systesm
Speaker Component
Sensitivity (1W, 1m)
90 dB
Frequency Response
80 – 20.000 Hz
Speaker Component
12cm dynamic cone-type + dome-type
Finish
Enclosure: ABS resin, black or white/
Grille:Surface treated steel plate, black or white, powder coating
Dimensions
196 (W) x 290 (H) x 150 (D) mm [7.7 (W) x 11.4 (H) x 5.9 (D) in]
Weight
2.5kg (5.5lbs)
Intercom
SP-410
Rated Impedance
Security
& Safety
vWall Mount Bracket
30W
8Ω/100V line: 330Ω, 500Ω, 200kΩ, 670Ω, 1kΩ, 2kΩ/
70V line: 170Ω, 250Ω,330Ω, 500Ω, 1kΩ
Combination Type Reflex Horn Speakers Optional Accessories
vPole Mount Bracket
vWall Mount Bracket
vPole Band
vWall and Pole Mount Bracket
SP-131
SP-301
YS-60B
SP-201
TOA Electronics, Inc. 44
Reference
• 2-Way bass reflex speaker
• Cost-effective high power PA box speaker
• Aesthetically pleasing design blends in modern buildings and other facilities,
such as boutique, restaurant and amusement park
• Low impedance (8Ω) or high impedance (100V/70V) selectable by rotary switch
• Splashproof construction in compliance with IPX4
Rated Input (100V line)
Megaphones
BS-1030B/W
BS-1030B
BS-1030W
Microphones
F Series Wide-dispersion Ceiling Speakers
Wireless
Systems
• Expanded listening coverage area through extra-wide dispersion characteristics
• Minimal high frequency roll off allows clear and well-balanced sound reproduction over a wide listening area
• Designed to blend into ceilings with a smooth, low-profile design
• Extra ease of use and higher cost-effectiveness with metal “back can” enclosure for speaker back. (F-122C, F-2352C,F-2852C, F-2322C models)
Rack Mount Equipment,
Network Audio and Others
Mixers
Amplifiers
Speakers
F-122C
F-122CU2
F-2852C
F-2852CU2
• Equalizing controlled type full range speaker for
medium ceiling height (2 to 4 m)
• Cost effective if many speakers are installed
• Heat-resistant back can
• Optimized for use with optional digital processors
• Diffuser for wide dispersion of high frequencies
• Is UL 1480UUMW rated
• CU2 is UL 2043 plenum rated
• 2-way speaker for high power (60W)
applications e.g. for high ceilings (3 to 6 m)
• Diffuser for wide dispersion of high frequencies
• Metal back can
• CU2 is UL 2043 plenum rated
F-2322C
F-2322CU2
F-2352C
F-2352CU2
• Full range speaker for medium ceiling height (2 to 4 m)
• Metal back can
• CU2 is UL 2043 plenum rated
• 2-way speaker for medium ceiling height (2 to 4 m)
• Diffuser for wide dispersion of high frequencies
• Metal back can
• CU2 is UL 2043 plenum rated
F-2352SC
F-1522SC
• 2-way wide range speaker with diffuser for low power
applications and medium ceilingheight (2 to 4m)
• Easy installation
• Diffuser for wide dispersion of high frequencies
• For use in ceilings with minimal depth
• Cost-effective compact full range speaker
for medium ceiling height (2 to 4 m)
• Only 117 mm mounting depth
• Flat front panel
F-2852C
Rated Input (100V line)
F-2322C
F-2352C
60W
F-122C
F-2352SC
30W
Conference
Systesm
Sensitivity (1W, 1m)
91dB
Frequency Response
80 – 20,000 Hz
Mounting Hole Diameter
250 mm
90dB
70 – 20,000 Hz
40 – 20,000 Hz
89dB
88dB
80 – 20,000 Hz
65 – 18,000 Hz
200mm
Megaphones
Low: 16cm cone-type,
High: Dome-type
12cm cone-type
Low: 12cm cone-type,
High: Balanced dometype
ø135mm
12cm cone-type
Low: 12cm cone-type,
High: Balanced dometype
Intercom
Dimensions
280 x 236(D) mm
(11” x 9.29”)
Weight
5.8kg (12.79 lbs)
230 x 209 (D) mm
(9.1” x 8.23”)
230 x 238(D) mm (9.06” x 9.37”)
4.3kg (9.48 lbs)
230 x 154(D) mm
(9.1” x 6.1”)
155 x 117(D) mm
(6.1” X 4.6”)
1.5kg (3.3 lbs)
1kg (2.2 lbs)
F Series Wide-dispersion Ceiling Speakers Optional Accessories
Security
& Safety
Reference
vBack Can
vTile Rails
vTrim Ring
HY-BC1
HY-TB1
HY-TR1
vReinforcement Ring
vReinforcement Ring
vEqualization for F-122C
HY-RR1
HY-RR2
(900 Series module)
• For F-1522SC
• For F-2352SC
507-07-239-50 - CU2 version tile bridge included with F-122CU2, F-2322CU2, F-2352CU2
507-07-240-30 - CU2 version tile bridge included with F-2852CU2
7020116720 - Ceiling reinforcement ring, fits model F-2852C
TOA Electronics, Inc.
10cm cone-type
Baffle: Fire-resistant ABS resin, black/
Rim: Fire-resistant ABS resin, white/
Punched net: Steel plate, white, paint/
Dust proof bag: Artificial fiber, black
Enclosure: Steel plate, plating/Baffle: Fire-resistant ABS resin,
black/Rim: Fire-resistant ABS resin, white/Punched net: Steel plate, white, paint
Finish
45
F-1522SC
6W
70V line: 83Ω (60W), 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 3.3kΩ (1.5W)
25V line: 83Ω (7.5W), 170Ω (3.7W), 330Ω (1.9W), 670Ω (0.9W), 3.3kΩ (0.2W)
Low (adjustable): 16Ω, 8Ω
Rated Impedance
Speaker Component
Note: CU2 version comes with 2 speakers in a box and 2 tile bridges.
E-03R
Microphones
• Splashproof design in compliance with IPX4, available on models
“BTWP/WTWP”
• Great variety of brackets available
• Paintable enclosure and front grille
F-1300BT
F-1300BTWP
F-1300WT
F-1300WTWP
F-2000BT
F-2000BTWP
F-2000WT
F-2000WTWP
• LF Driver: 4” cone woofer
• HF Driver: balanced dome tweeter
• Dispersion: 90°H x 90°V
• LF Driver: 5” cone woofer
• HF Driver: 1” dome tweeter
• Dispersion: 110°H x 100°V
• LF Driver: 8” cone woofer
• HF Driver: 1” hard-dome dome tweeter
• Dispersion (adjustable): 110°H x 100°V;
80°H x 80°V (with supplied throat adapter)
F-2000BT
F-2000WT
F-2000BTWP
F-2000WTWP
15W
30W
60W
8Ω/100V line: 670Ω (15W), 2kΩ (5W), 3,3kΩ (3W),
10kΩ (1W)
70V line: 330Ω (15W), 670Ω (7.5W), 2kΩ (2.5W),
3,3kΩ (1.5W), 10kΩ (0.5W)
8Ω/100V line: 330Ω (30W), 1kΩ (10W), 3,3kΩ
(3W), 10kΩ (1W)
70V line: 170Ω (30W), 330Ω (15W), 1kΩ (5W),
3,3kΩ (1.5W), 10kΩ (0.5W)
8Ω/100V line: 170Ω (60W), 330Ω (30W), 670Ω
(15W), 3.3kΩ (3W)
8Ω/70V line: 83Ω (60W), 170Ω (30W), 330Ω
(15W), 670Ω (7.5W), 3.3kΩ (1.5W)
Sensitivity (1W, 1m)
87 dB
90dB
92dB
Frequency Response
85 – 20,000 Hz
80 – 20,000 Hz
65 – 20,000 Hz
Speaker Component
Low: 10cm cone-type, High: Balanced dome tweeter
Low: 13cm cone-type, High: 2.5cm dome tweeter
Low: 20cm cone-type, High: 2.5cm dome tweeter
Enclosure: HIPS resin, black or white/
Punched net: Surface-treated steel plate, black or
white, paint
Enclosure: HIPS resin, black or white/
Punched net: Surface-treated steel plate, black or
white, paint
Enclosure: HIPS resin, black or white/
Punched net: Surface-treated steel plate, black or
white, paint
130 (W) x 202 (H) x 131(D) mm (5.1” x 8” x 5.2”)
162 (W) x 250 (H) x 161(D) mm (6.4” x 9.8” x 6.3”)
244 (W) x 373 (H) x 235(D) mm (9.6” x 14.7” x 9.3”)
Finish
Dimensions
Weight
1.8kg (4 lbs)
2kg (4.4 lbs)
Dust/Water Protection
--
IPX4
3.6kg (7.9 lbs)
--
IPX4
7.4kg (16.3 lbs)
--
IPX4
F Series Wide-dispersion Speakers Optional Accessories
vCeiling Mounting Bracket
vCeiling Mounting Bracket
vBoard Hanger Bracket
HY-CL10B*
HY-CM10B*
HY-CM10W*
HY-BH10B*
vCluster Bracket
vCeiling Mounting Bracket
vCeiling Mounting Bracket
vPole Mounting Bracket
HY-CL20B*
HY-CM20B*
HY-CM20W*
SP-131
Security
& Safety
vCluster Bracket
Speakers
F-1300BTWP
F-1300WTWP
Conference
Systesm
Rated Impedance
F-1300BT
F-1300WT
Megaphones
Rated Input (100V line)
F-1000BTWP
F-1000WTWP
Intercom
F-1000BT
F-1000WT
Amplifiers
Mixers
F-1000BT
F-1000BTWP
F-1000WT
F-1000WTWP
Wireless
Systems
• Compact box speaker for music and voice paging distribution
• Octagonal horn design for smooth coverage
• Adjustable high frequency dispersion (F-2000 models)
• Extruded cabinet design improves low frequency performance
Rack Mount Equipment,
Network Audio and Others
F Series Wide-dispersion Speakers
YS-60B
*Indoor use only.
TOA Electronics, Inc. 46
Reference
vPole Mounting Bracket
Microphones
Pendant/Projection Speakers
Wireless
Systems
vPendant Speaker
vPendant Speaker UL1480UUMW rated)
PE-304
Q-PE-304BK
PE-64
PE-304BU
PE-304WU
PE-604BU
PE-604WU
Rack Mount Equipment,
Network Audio and Others
• Stylish and outstanding design inspired by
the finest lighting fixtures
• Sturdy cable extendable up to 5 meters
• Paintable
• Input impedance easily changeable
• Ideally suited for BGM and announcements
• Q-PE-304BK Black version
• Directly attached 5m (16.4ft) hanging wire
allows speaker to be suspended from high ceilings
• Driven on both high impedance (100V, 70V, and 25V)
and low impedance (8Ω) lines
• Certified to UL 1480 UUMW standards
• Using supplied GRIPPLE® hangers will failitate the
speaker mounting height adjustment
Mixers
Amplifiers
PE-304/Q-PE-304BK
PE-64
PJ-304
Rated Input (100V line)
30W
6W (100V line), 3W (70V line)
30W
Rated Impedance
100 line: 330Ω (30W), 500Ω (20W), 670Ω
(15W), 1kΩ (10W), 2kΩ (5W)
70V line: 170Ω (30W), 250Ω (20W), 330Ω
(15W), 500Ω (10W), 1kΩ (5W)
100 line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W)
70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 10Ω (0.5W)
100 line: 330Ω (30W),500Ω (20W), 670Ω
(15W), 1kΩ (10W), 2kΩ (5W)
70V line: 170Ω (30W), 250Ω (20W), 330Ω
(15W), 500Ω (10W, 1kΩ (5W)
Sensitivity (1W, 1m)
91 dB
90 dB
91 dB
Frequency Response
70 – 20,000 Hz
100 - 18,000 Hz (peak -20dB)
70 – 20,000 Hz
Speaker Component
12cm cone-type + balanced
dome tweeter
12cm (5”) cone-type
12cm cone-type + balanced
dome tweeter
Finish
Enclosure: HIPS resin, off-white / Grille: Surface-treated steel plate net, off-white
Dimensions
Speakers
Weight
186 x 251(H) mm (unit only) (7.3” x 9.9”)
2.1kg (4.6 lbs)
186 x 369 (H) mm (7.3” x 14.5”)
1.5kg (3.31lbs) (unit only)
2.1kg (4.6 lbs)
vProjection Speaker
PJ-304
Conference
Systesm
• Stylish and outstanding design inspired by the finest lighting fixtures
• Flexible speaker direction adjustment with accessory brackets
• Paintable
• Input impedance easily changeable
• Ideally suited for BGM and announcements
Garden Speaker
Megaphones
vGarden Speaker
GS-302
Intercom
• Compact Garden Speaker ideal for paging and background music
broadcast in such places as gardens, theme parks and resort facilities
• Corrosion resistant material is adopted to the speaker exterior, ensuring prolonged use of the speaker in a water-splashed environment
• The appearance of Garden Speaker is designed so inconspicuous that
the speaker can be installed in shrubberies of garden blending with the
surroundings
Security
& Safety
Reference
47
TOA Electronics, Inc.
GS-302
Enclosure
Sealed type
Rated Input
30W (100V line), 15W (70V line)
Rated Impedance
100V line: 330Ω (30W), 670Ω (15W), 1kΩ (10W), 2kΩ (5W), 3.3kΩ (3W)
70V line: 330Ω (15W), 670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W), 3.3kΩ (1.5W)
Sensitivity
87dB (1W, 1m)
Frequency Response
100 – 8,000Hz
Speaker Component
12cm splash-proof cone-type
Input Terminal
Push-in terminal
Applicable Cable
Solid copper wire: ø0.8 – ø1.6mm
Stranded copper wire: 0.75 – 1.25mm2
Water Capability
Meets IPX4 requirements
Finish
Top cover and base: FRP resin, dark gray, semi-gloss, paint
Speaker panel: ABS resin, dark gray, semi-gloss, paint
Legs: Aluminum, dark gray, semi-gloss, paint
Dimensions
ø270 × 335 (H)mm
Weight
2.4kg
Microphones
Interior Design Speakers
Rated Input (100V line)
12W (16Ω)
H-2WP
12W (16Ω)
30W (16Ω)
85 dB
Frequency Response
120Hz – 20kHz
Speaker Component
Low: 8 x 5cm cone-type,
High: Balanced dome-type
Finish
Adapter frame: Stainless steel/
Cover: Fire-resistant ABS resin,
white/Punched net: Steel plate,
white paint
Frame: Fire-resistant ABS resin, white/
Base frame: Steel plate/
Punched net: Steel plate, white paint
Dimensions
312 (W) x 126 (H) x 90(D) mm
(12.3” x 5” x 3.5”)
268 x 111 (H) mm (10.5” x 4.4”)
Weight
1.5kg (3.3 lbs)
--
88dB
89dB
100Hz – 20kHz
Low: 10cm cone-type x 2,
High: 2.5cm dome-type (neodymium magnet)
Low: 10cm cone-type, High: Balanced dome-type
Enclosure: Fire-resistant ABS
resin, black/
Frame: Fire-resistant ABS
resin, off-white
Punched net: Stainless plate,
off-white, paint/
Base Frame: Steel plate,
plating
3.3kg (7.3 lbs)
IPX4
--
vWall/Ceiling Mount Subwoofer System
HB-1
IPX4
HB-1
Power Handling Capacity
• High-power 8” woofer with 110mm ferrite magnet and
aluminum bobbin
• Acoustic super-woofer with acoustical bandpass filtering
construction
• Thin-wall metal frame, with large interior volume for excellent
low-frequency audio response, plus efficient heat dispersion
• Installs Between standard studs on 16 inches centers
• TOA designed brackets allow simplified “blind” flush mounting in wall or ceiling
Enclosure: Fire-resistant ABS
resin, black/
Frame: Fire-resistant ABS
resin, off-white/
Punched net: Steel plate (zinc
plating),off-white, powder
coating/
Base Frame: Stainless steel
295 (W) x 318 (H) x 129 (D) mm (11.6” x 12.5” x 5.1”)
2.1kg (4.6 lbs)
--
240W (continuous program)
Rated Impedance
8Ω
Sensitivity (1W, 1m)
91dB
Frequency Response
45 – 200Hz
Speaker Component
20cm cone speaker
Finish
Enclosure; Steel plat, black paint
Front Frame; Fire-resistant ABS resin, off-white, paint
Punched net; Steel plate, off-white, paint
Dimensions
430 (W) x 544 (H) x 135 (D) mm
(16.9” x 21.4” x 5.3”)
Weight
11kg (24.3 lbs)
Interior Design Speakers Optional Accessories
vAdapter Frame
vMatching Transformer
HY-H1
MT-S0601
Reference
v900 Series Equalization Modules
E-04R (H-1)
E-05R (H-2/H-2WP)
E-06R (H-3/H-3WP)
E-07S (HB-1)
Rack Mount Equipment,
Network Audio and Others
4Ω or 16Ω/100V line: 330Ω (30W), 670Ω (15W), 1.3kΩ (7.5W)
70V line: 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 1.3kΩ (3.75W)
Sensitivity (1W, 1m)
Dust/Water Protection
H-3WP
150W (continuous program)
4Ω or 16Ω/100V line: 830Ω (12W), 1.7kΩ (6W), 3.3kΩ (3W)
70V line: 420Ω (12W), 830Ω (6W), 1.7kΩ (3W), 3.3kΩ
Rated Impedance
Mixers
H-3
120W (continuous program)
Amplifiers
H-2
90W (continuous program)
Security
& Safety
H-1
Power Handling Capacity
H-3
H-3WP
Speakers
H-2
H-2WP
Conference
Systesm
H-1
v2-Way Wall Mount Speaker System
Megaphones
v2-Way Surface Mount
Speaker System
Intercom
v2-Way Flush Mount
Speaker System
Wireless
Systems
• Sleek, stylish appearance blends well with modern architecture for background/foreground music and paging systems
• Minimum reflection design reduces sound wave reflections typical of conventional bracket-mounted “box” type speakers
• Two-way, sealed enclosure
• Weather-resistant versions (H-2WP/H-3WP)
• Wide coverage area:
• (H-1) 120°H x 100°V
• (H-2/H-2WP) 100°H x 60°V
• (H-3/H-3WP) 140°H x 70°V
• Loudspeaker components rotate internally to allow flexible aiming (H-1/H-2/H-2WP)
• Built-in passive crossover with optimized filter slopes
• Paintable grille
• Fire-resistant ABS resin enclosure (H-1/ H-2)
TOA Electronics, Inc. 48
Microphones
Plane Wave Speakers
Wireless
Systems
• Flat speaker system equipped with a plane wave unit consisting of a diaphragm, bugger, magnet and case
• Sound radiated in narrow horizontal and vertical directivity patterns to deliver clear audio to a limited targeted area withminimal attenuation
• Splash-proof, rust resistant construction, IPX4
• Beam tilting function directs sound radiation about five degrees downward of the horizontal axis
• Built-in high-pass filter
• This speaker is ideal for information broadcast applications and can be found in railway stations
Rack Mount Equipment,
Network Audio and Others
Mixers
vCompact Double-Sided Radiation Type
vLarge Double-Sided Radiation Type
PW-1230DB
PW-1230DW
PW-1430DB
PW-1430DW
vCompact Single-Sided Radiation Type
vCompact Single-Sided Radiation Type
PW-1230SB
PW-1230SW
PW-1430SB
PW-1430SW
PW-1230DB
Type of Radiation
PW-1230DW
PW-1230SB
PW-1203SW
Amplifiers
Double-sided radiation
(The side with the TOA logo affixed: Positive pressure wave, Rear: Negative
pressure wave)
Single-side radiation
Rated Impedance
100V line: 330Ω (30W), 670Ω (15W), 1kΩ (10W), 2kΩ (5W); 70V line: 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W)
Sensitivity
86 dB (1W, 1m equivalent measured at 4m, 1-10 kHz)
86 dB (1W, 1m measured at 1m, 1-10 kHz)
(Beam tliting: FLAT, High pass filter: OFF)
87 dB (1W, 1m equivalent measured at 4m, 1-10 kHz)
87 dB (1W, 1m measured at 1m, 1-10 kHz)
(Beam tliting: FLAT, High pass filter: OFF)
300 Hz – 17.5 kHz (beam tilting: FLAT, high pass filter: OFF)
450 Hz – 17.5 kHz (beam tilting: FLAT, High pass filter: OFF)
Frequency Response
Speakers
Speaker Unit
Plane wave unit (152 x 214 mm (5.98” x 8.43”)) x 2
Directivity Angle
Finish
Horizontal: 38° (2 kHz, 1/3 octave band), / Vertical: 75° (2 kHz, 1/3 octave band)
Enclosure, Punched net and
Mounting bracket: Stainless, black,
semi-gloss, paint
Dimensions
Enclosure, Punched net and
Mounting bracket: Stainless, light
ivory, semi-gloss, paint
Enclosure, Punched net and
Mounting bracket: Stainless, light
ivory, semi-gloss, paint
524 (W) x 355 (H) x 60 (D)mm (20.63” x 13.98” x 2.36”) (including mounting bracket)
Conference
Systesm
Weight
7.3 kg (16.09 lb) (including mounting bracket)
Water Protection
7.8 kg (17.2 lb) (including mounting bracket)
IPX4
PW-1230DB
Type of Radiation
Enclosure, Punched net and
Mounting bracket: Stainless, black,
semi-gloss, paint
PW-1230DW
PW-1230SB
PW-1203SW
Double-sided radiation
(The side with the TOA logo affixed: Positive pressure wave, Rear: Negative
pressure wave)
Single-side radiation
Megaphones
Rated Impedance
100V line: 330Ω (30W), 670Ω (15W), 1kΩ (7.5W), 2kΩ (5W); 70V line: 170Ω (30W), 330Ω (15W), 670Ω (7.5W), 1kΩ (5W), 2kΩ (2.5W)
Sensitivity
88 dB (1W, 1m equivalent measured at 4m, 1-10 kHz)
85 dB (1W, 1m measured at 1m, 1-10 kHz)
(Beam tliting: FLAT, High pass filter: OFF)
90 dB (1W, 1m equivalent measured at 4m, 1-10 kHz)
87 dB (1W, 1m measured at 1m, 1-10 kHz)
(Beam tliting: FLAT, High pass filter: OFF)
250 Hz – 17.5 kHz (beam tilting: FLAT, high pass filter: OFF)
400 Hz – 17.5 kHz (beam tilting: FLAT, High pass filter: OFF)
Frequency Response
Speaker Unit
Plane wave unit (152 x 214 mm (5.98” x 8.43”)) x 2
Directivity Angle
Intercom
Finish
Horizontal: 38° (2 kHz, 1/3 octave band), / Vertical: 75° (2 kHz, 1/3 octave band)
Enclosure, Punched net and
Mounting bracket: Stainless, black,
semi-gloss, paint
Dimensions
Weight
Water Protection
Enclosure, Punched net and
Mounting bracket: Stainless, light
ivory, semi-gloss, paint
Enclosure, Punched net and
Mounting bracket: Stainless, black,
semi-gloss, paint
Enclosure, Punched net and
Mounting bracket: Stainless, light
ivory, semi-gloss, paint
831 (W) x 355 (H) x 60 (D)mm (32.72” x 13.98” x 2.36”) (including mounting bracket)
11.4 kg (25.13 lb) (including mounting bracket)
11.9 kg (26.23 lb) (including mounting bracket)
IPX4
Security
& Safety
Impedance Meter
Reference
vImpedance Meter
ZM-104A
49
TOA Electronics, Inc.
• Measures impedance of speaker lines up to 100k ohms
• Batteries: 4 (AA) (not included)
• Zero adjustment for accuracy on all ranges
• Easy to read meter calibrates directly in ohms
• Includes carrying case, test leads and impedance to power reference chart
Microphones
Horn Array Speaker
Wireless
Systems
vHorn Array Speaker
HA-450H
HA-450L
High intelligibility
Speakers
Amplifiers
Mixers
Up to 1km
Rack Mount Equipment,
Network Audio and Others
• Outdoor long range speaker incorporating “line array speaker technology”
• Less sound decay and can deliver sound about twice as far as conventional outdoor speakers for wireless
system (when compared with reflex horn speaker and straight horn speaker made by TOA Corporation)
• The sound is mild near-by the speaker and clear far away from the speaker
Conference
Systesm
Long Range Slim Array Speaker
vLong Range Slim Array Speaker
HA-1010-AM
Reference
Security
& Safety
Intercom
Megaphones
The Long Range Slim Array Speaker is composed of multiple horn speakers
positioned in an array. It features long-range sound coverage further than
conventional horn speakers, and narrowly focused vertical directivity that allows
excessive volume to be controlled at closer proximity.
90O horizontal x 15O vertical wide directivity high-frequency array horn speaker.
TOA Electronics, Inc. 50
Microphones
Line Array Speakers Type A
Wireless
Systems
TOA’s Type A Full Size, Two-Way Line Array Speakers feature a linear wave front control technology that creates sound fields with uniform sound
pressure and high sound clarity. The SR-A12L and SR-A12S are two-way line array speakers ideal for long (SR-A12L) or short (SR-A12S) distance
sound transmission. The SR-A Series can utilize bi-amplification methods for improved frequency tuning and is complimented by using the optional
D-901 or D-2008 Digital Signal Processors.
Rack Mount Equipment,
Network Audio and Others
SR-A12L
SR-A12LWP
SR-A12S
SR-A12SWP
Mixers
SR-A12L
• Designed for wide bandwidth response
• Compact and powerful 2-way modular speaker units used in multiple
configurations as required to deliver greater output power with a more
extended frequency response
• High-performance driver units
• Each Type A Series speaker module contains a 30cm (12”) low
frequency unit and a high-frequency horn attached to two
compression drivers for greater output
• Wavefront control throat function to obtain the best possible performance from the high frequency drivers
• Simple maintenance and servicing for permanent installations
SR-A12LWP
Power Handling Capacity
Rated Impedance
SR-A12SWP
Low Frequency: 8Ω, High Frequency: 16Ω
Sensitivity (1W, 1m)
Low Frequency: 98dB, High Frequency: 110dB
Frequency Response
Low Frequency: 98dB, High Frequency: 109dB
50 – 20,000 Hz (when using an optional DSP processor)
Amplifiers
Low Frequency: 30cm cone type; High Frequency: Wave front control horn
90° (horizontal) x 5° (vertical) + compression driver x 2
Speaker Component
Directivity Angle
Finish
SR-A12S
Continuous program, Low Frequency: 450W, High Frequency 180W
Low Frequency: 30cm cone type; High Frequency: Wave front control horn
90° (horizontal) x 15° (vertical) + compression driver x 2
Horizontal: 90°, Vertical: 5°
Horizontal: 90°, Vertical: 15°
Enclosure:
Plywood, black, paint
Plywood, black, urethane coating
Plywood, black, paint
Plywood, black, urethane coating
Front grille:
Punched steel plate, black, acrylic paint
Punched stainless steel, black, paint
Punched steel plate, black, acrylic paint
Punched stainless steel, black, paint
Dimensions
740 (W) x 433 (H) x 469 (D)mm [29.1 (W) x 17 (H) x 18.5 (D)in]
740 (W) x 433 (H) x 467 (D)mm [29.1 (W) x 17 (H) x 18.4 (D)in]
Speakers
Weight
49 kg (108 lbs)
51 kg (112.4 lbs)
47kg (103.6 lbs)
48kg (106 lbs)
Water Protection
--
IPX4
--
IPX4
Line Array Speakers Type A Subwoofer
Conference
Systesm
SR-A18B
SR-A18B
Power Handling Capacity
Megaphones
• Designed for use in conjunction with the SR-A
Series Line Array Speakers
• Compact indoor subwoofer system
• High-power 18” woofer, 720W, 8 ohm
• Ideal for reproducing dynamic low-frequency
sound for both permanent
and temporary installations
Continuous program: 720W
Rated Impedance
8Ω
Sensitivity (1W, 1m)
95 dB
Frequency Response
40 – 400Hz (when using optional DSP processor)
Speaker Component
46 cm cone-type
Finish
Enclosure: Plywood, black, paint;
Front Grille: Punched steel plate, black, acrylic paint
Dimensions
740 (W) x 573 (H) x 698 (D)mm [29.1 (W) x 22.6 (H) x 27.5 (D)in]
Weight
66 kg [145.5 lbs] (including accessories)
Line Array Speakers Type A Optional Accessories
Intercom
vMid-type - rigging for SR-A18B
vMid-type - rigging frame, weather resistant
vMid-type - tilt joint plate
SR-RF12
SR-RF12WP
SR-TP12
Security
& Safety
Connection Diagram
Biamp drive
Reference
HF
Processor
51
TOA Electronics, Inc.
LF
SR-C8L
SR-C8LWP
Microphones
SR-C8S
SR-C8SWP
SR-C8L
• Superior sound quality - Sync-Drive technology keeps the audio in phase
with its sources at the speakers to create an ideal linear sound source
• High-fidelity sound - due to the design of the speakers phase wave-front
control technology, high-fidelity sound is produced without causing
attenuation of high-frequency sound
• Adjustable sound coverage
• Resistant to feedback and enjoy reflection-free operation
• Single or bi-amp mode - by changing the position of an internal connector
SR-C8LWP
Power Handling Capacity
SR-C8SWP
Continuous program: 360 W(Single-amp mode; Low 360 W, High: 180 W (Bi-amp mode)
98 dB (single-amp mode) Low: 95dB, High: 110dB (bi-amp mode)
65 – 20,000 Hz (when using an optional DSP processor)
Low Frequency: 20 cm cone type; High Frequency: Wave front control horn
110° (horizontal) x 5° (vertical) + compression driver x 2
Horizontal: 90°, Vertical: 5°
Horizontal: 90°, Vertical: 15°
Enclosure:
Plywood, black, urethane paint
Plywood, black, urethane coating
Plywood, black, urethane paint
Plywood, black, urethane coating
Front grille:
Punched steel plate, black, paint
Punched stainless steel, black, paint
Punched steel plate, black, paint
Punched stainless steel, black, paint
Dimensions
526.6 (W) x 293 (H) x 296 (D) mm (20.73” x 11.54” x 11.65”)
Weight
17 kg (37.48 lb)
Water Protection
--
526.6 (W) x 293 (H) x 294 (D) mm (20.73” x 11.54” x 11.57”)
16 kg (35.27 lb)
IPX4
--
IPX4
Line Array Speakers Type C Subwoofer
SR-C15B
SR-C15BWP
SR-C15B
Power Handling Capacity
SR-C15BWP
Continuous program: 450 W
Rated Impedance
• Designed for use in conjunction with the SR-C
Series Line Array Speakers
• Indoor and outdoor versions available,
weather-resistant version has cable connection
• 15” high power woofer
• 450 W continuous power handling
8Ω
Sensitivity (1W, 1m)
93 dB
Frequency Response
40 – 400Hz (when using optional DSP processor)
Speaker Component
Finish
38 cm (15” ) cone-type
Enclosure:
Plywood, black, urethane paint
Plywood, black, urethane coating
Front grille:
Punched steel plate, black, paint
Punched stainless steel, black, paint
Dimensions
526.6 (W) x 594.8 (H) x 550 (D) mm (20.73” x 23.42” x 21.65”)
Weight
Water Protection
Amplifiers
Directivity Angle
Low Frequency: 30cm cone type; High Frequency: Wave front control horn
110° (horizontal) x 15° (vertical) + compression driver x 2
Speakers
Speaker Component
Conference
Systesm
Frequency Response
Mixers
16Ω (single-amp mode); Low: 16Ω, High: 16Ω (bi-amp mode)
Sensitivity (1W, 1m)
41 kg (90.39 lb)
--
IPX4
Line Array Speakers Type C Optional Accessories
vRigging frame
vRigging frame, weather resistant
SR-CL8
SR-RF8
SR-RF8WP
SR-SB8
SR-TP8
Security
& Safety
vTilt joint bracket
Reference
vRigging support bracket
Intercom
vCluster bracket, black
Megaphones
Rated Impedance
Finish
SR-C8S
Wireless
Systems
TOA’s Type C Mid-Size, Two-Way Line Array Speakers feature wave front control technology which creates a sound field with high sound clarity and
uniform sound pressure level. Recommended digital processor is the D-901 or D-2008 (optional). They can be converted to operate in bi-amplifier or
full-range modes with simple internal adjustment.
Rack Mount Equipment,
Network Audio and Others
Line Array Speaker Type C
TOA Electronics, Inc. 52
Microphones
Compact Array Speakers
Wireless
Systems
HX-5B
HX-5B-WP
HX-5W
HX-5W-WP
Rack Mount Equipment,
Network Audio and Others
• Innovative modular speaker design includes four preassembled
modules with four LF drivers and twelve HF dome tweeters
• Adjustable dispersion angle to 60, 45, 30 or 15 degrees
• Improved intelligibility through tailored coverage
• In-line driver arrangement for superior vertical coverage control
• Contoured waveguide-baffle for distortion-free coverage control
• High power handling; 600W continuous (200W pink noise)
• Splashproof versions (HX-5B-WP/HX-5W-WP)
• Parallel connectors - dual speakon and screw terminal
• A wide variety of optional mounting hardware is available
HX-5B/W
HX-5B-WP/W-WP
Power Handling Capacity
Continuous program: 600W
Rated Impedance
8Ω
Sensitivity (1W, 1m)
Mixers
Frequency Response
96dB (60° mode), 97dB (45° mode), 98dB (30° mode, 99dB (15° mode)
70 – 20,000Hz (60° mode)
Speaker Component
95 – 20,000Hz (60° mode)
Low: 12cm cone-type x 4, High: Balanced dome-type x 12
Directivity Angle
Horizontal: 100°/Vertical: 60°, 45°, 30°, 15° variable
Finish
Enclosure: Polypropylene, black or white/Punched net: Surface-treated steel plate, black or white
Dimensions
408 (W) x 546 (H) x 342(D)mm [16 (W) x 21.5 (H) x 13.5 (D)in]
Amplifiers
Weight
16kg (35.3lbs)
Dust/Water Protection
--
IPX4
vSubwoofer
FB-120B/W
FB-120B
FB-120W
Power Handling Capacity
Speakers
• Compact subwoofer
• Extremely wide frequency range
• For floor-, wall-, corner- or ceiling-mount
• 600W continuous program high-power
subwoofer system
Continuous program: 600W
Rated Impedance
8Ω
Sensitivity (1W, 1m)
90 dB
Frequency Response
40 – 1,200Hz
Conference
Systesm
Speaker Component
30cm cone-type
Finish
Enclosure: Plywood, black or white, paint/Steel plate, black or white, paint
Dimensions
408 (W) x 408 (H) x 450(D)mm [16.1 (W) x 16.1 (H) x 17.7(D)in]
Weight
15kg (33lbs)
Megaphones
Compact Array Speakers Optional Accessories
Intercom
Security
& Safety
Reference
53
vExtension Bracket
vExtension Bracket
vExtension Bracket
vExtension Bracket
vCeiling Mount Bracket
HY-CN1B
HY-CN1W
HY-CN1B-WP
HY-CN1W-WP
HY-CW1B
vRigging Frame
vRigging Frame
vRigging Frame
vMount Bracket
vCeiling Mount Bracket
HY-PF1B
HY-PF1W
HY-PF1WP
HY-WM1B
HY-CW1W
vMount Bracket
vMount Bracket
vMount Bracket
vMount Bracket
vSpeaker Stand Adapter
HY-WM1W
HY-WM1WP
HY-WM2B
HY-WM2W
HY-ST1
vMount Bracket
vMatching Transformer
HY-WM2WP
MT-200
TOA Electronics, Inc.
HX-7W
HX-7W-WP
Microphones
• 4 cell configuration each incorporating:
• (2) 5 ½“ Low-frequency drivers
• (1) Center-mounting, waveguide-loaded 1” compression driver
• Flexible vertical angle adjustment between 0˚ and 45˚ (60˚ w/optional
adapter)
• Power handling: 750W Continuous Program @ 8 Ohms
• Frequency response: 75Hz to 20kHz
• 100dB sensitivity (1W @ 1m)
• Optional hardware for stand, wall, ceiling & flown installations
• Black or White & weather-proof (WP) versions available
HX-7B/HX-7W
Bass-reflex type
Sealed type
Power Handling Capacity
Continuous pink noise: 250 W (IEC60268-5: 350 W); Continuous program: 750 W
Rated Impedance
8 Ω
75 Hz - 20 kHz
105 Hz - 20 kHz
Crossover Frequency
1.7 kHz
Directivity Angle
Horizontal: 100°; Vertical: Depending on directivity angle mode
Low frequency: 13 cm (5.5”) cone-type x 8; High frequency: Wave front control horn with compression driver x 4
Input Terminal
Speakon NL4MP x 2 and M4 screw terminal, distance between barriers: 9 mm (0.35”)
M4 screw terminal, distance between barriers: 9 mm (0.35”)
Water Protection
--
IPX4 (Install with every speaker module tilted downward from the horizontal.)
Finish
Enclosure: Polypropylene, black or white (HX-7B/W)
Punched net: Surface-treated steel plate, black or white (HX-7B/W), paint
Hanging bracket: Steel plate, t3.0, black or white (HX-7B/W), paint
Enclosure: Polypropylene, black or white (HX-7B/W-WP)
Punched net: Surface-treated steel plate, black & white (HX-7B/W-WP), rust
proof coating
Dimensions
Amplifiers
Speaker Component
497 (W) x 664 (H) x 274 (D) mm (19.57” x 26.14” x 10.79”)
vSubwoofer
FB-150B
FB-150W
• Partner Subwoofer for HX-7 (may be used with other TOA speakers)
• High-compliance 15” low-frequency speaker
• Bass-reflex enclosure
• Screw-terminal & Speakon™ connectors
• Power handling 600W Continuous Program @ 8 Ohm
• Black or White versions available
Continuous pink noise: 200 W; Continuous program: 600 W
Rated Impedance
8 Ω
Sensitivity
93 dB (1 W, 1 m)
Frequency Response
40 Hz - 400 Hz (-10 dB)
Speaker Component
38 cm (15”) cone-type
Input Terminal
Speakon NL4MP x 2 and M5 screw terminal,
distance between barriers: 12.2 mm (0.48”)
Finish
Enclosure: MDF, black or white (FB-150B/W), urethane paint
Punched net: Surface-treated steel plate, black & white (FB150B/W), paint
Dimensions
505 (W) x 528 (H) x 477 (D) mm (19.88” x 20.79” x 19.17”)
Weight
30 kg (66.14 Ib)
Variable Dispersion Loudspeakers Optional Accessories
vCeiling Bracket Set
vCeiling Bracket Set
vJoining Bracket
vJoining Bracket
vAngle Adjustment Bracket
HY-CM7BSET
HY-CM7WSET
HY-CN7B-WP
HY-CN7W-WP
HY-60DB-WP-3
vRigging Frame
vRigging Frame
vT Rigging Bracket
vT Rigging Bracket
vAngle Adjustment Bracket
HY-PF7B
HY-PF7W
HY-TM7B-WP
HY-TM7W-WP
HY-60DW-WP-3
vMatching Transformer Adapter
vWall Mount Bracket Set
vWall Mount Bracket Set
HY-MT7
HY-WM7BSET
HY-WM7WSET
Reference
vSpeaker Stand Adapter
Conference
Systesm
FB-150B/FB-150W
Power Handling Capacity
Speakers
30 kg (66.14 Ib)
Megaphones
Weight
Intercom
Frequency Response
100 dB (1 W, 1 m)
Mixers
Sensitivity
Security
& Safety
Enclosure
HX-7B-WP/HX-7W-WP
Wireless
Systems
HX-7B
HX-7B-WP
Rack Mount Equipment,
Network Audio and Others
Variable Dispersion Loudspeakers
HY-ST7
TOA Electronics, Inc. 54
Microphones
Line Array Speaker Type D
Wireless
Systems
TOA brought together it s proprietary line array technology and digital signal processing (DSP) technology in developing the SR-D8 Steerable Line
Array Speaker. As well as processing both analog and digital audio input, this innovative speaker harnesses 8 built-in digital amplifiers to project
sound waves to targeted areas with greater precision than is possible with conventional speakers. By digitally shaping the width and angle of
acoustic beams, it can steer sound precisely to desired areas without requiring a change of installation location.
vSteerable Active Line Array Speaker - Master
Rack Mount Equipment,
Network Audio and Others
SR-D8-M
vSteerable Active Line Array Speaker - Slave
SR-D8-S
Mixers
• A maximum total of 16 speakers (in up to four stacks) an be controlled as a single unit via GUI-operated software.
• The intuitive control software enables instant simulations that reduce the time required for designing systems and tuning
their acoustic performance.
• The speaker comes with a DSP functions, including gain, mute, compression, delay, auto -mixing, high/low pass filters,
high/low shelving filters, and a notch filter.
• Equipped with two analog audio input terminals and four digital audio input terminals for CobraNet connection, the
speaker supports 6 x 2 matrix mixing.
SR-D8-S
SR-D8-M
Amplifiers
Power Consumption
320 W (rated output), 72 W (based on UL/CSA standards)
Coverage
315 W (rated output), 72 W (based on UL/CSA standards)
Horizontal: 90°
Vertical Beam Width: up to 45°
Vertical Beam Angle: ±45° (adjustable by using the supplied SR-D8 setting software)
Frequency Response
130 Hz – 20 kHz
Speaker Component
Low Frequency: 10 cm cone-type x 8; High Frequency: 2.5 cm balanced dome-type x 24
Maximum SPL
Speakers
Finish
Dimensions
SR-D8-M
SR-D8-S
Max. 93 dB SPL (A-weighted, pink noise, 30 m)
Enclosure: MDF, white, paint; Front Grille: Punched steel plate, white, acrylic paint
160 (W) x 895 (H) x 255 (D) mm (6.3” x 35.24” x 10.04”)
Weight
21 kg (46.3 lb)
Line Array Speaker Type D Optional Accessories
Conference
Systesm
vWall mounting adapter
vWall mounting adapter
vExtension plate
SR-D8CL
SR-D8CS
SR-D8EP
Megaphones
vFixing bar
SR-D8FB
Line Array Speaker Type D System Example
Analog audio
CobraNet
Handheld mic
Intercom
vHoisting bracket
SR-D8-M
SR-D8HB
( Main )
Digital Mixing System
D-2008SP
Security
& Safety
vWall mounting bracket
SR-D8-S
( Sub )
Lavalier mic
SR-D8WB
SR-D8-S
( Sub )
CD Recorder
Reference
Remote Console Unit
(with case)
D-2012C
SR-D8-S
( Sub )
PC
55
TOA Electronics, Inc.
LAN
*In this case, either analog audio or CobraNet will be used.
Microphones
SR-S4S
SR-S4SWP
• 2-way line array speaker with 8 10-cm (4”) woofers and 24
high-frequency drivers, installed vertically
• Clear sound with reduced attenuation over distance
• Speakers are reflection-free and feedback resistant
• Splashproof versions (SR-S4LWP/SR-S4SWP)
• Biamp or single amp drive possible
• A wide variety of optional mounting bracket is available
• Optional matching transformer MT-S0601 for high-impedance operation
SR-S4L
SR-S4LWP
SR-S4S
Power Handling Capacity
Rated Impedance
8Ω
Sensitivity (1W, 1m)
94dB
93dB
70 – 20,000Hz
Low: 10cm cone-type x 8, High: 2.5cm balanced dome-type x 24
Horizontal: 90°/Vertical: 0°
Plywood, white, urethane coating
MDF, white, paint
Plywood, white, urethane coating
Punched steel plate, white, acrylic paint
Punched stainless steel (SUS304),
white paint
Punched steel plate, white, acrylic paint
Punched stainless steel (SUS304),
white paint
Amplifiers
160 (W) x 892 (H) x 303(D)mm
16kg
Dust/Water Protection
--
IPX4
--
IPX4
Line Array Speakers Type S Optional Accessories
vExtension Plate
vExtension Plate
vFlying Bracket
v Floor Stand
vWall Mounting Bracket
SR-EP4
SR-EP4WP
SR-FB4
SR-FS4
SR-WB4
vStand Adapter
vWall Tilt Bracket
vWall Tilt Bracket
vProtection Pad
vWall Mounting Bracket
SR-SA4
SR-TB4
SR-TB4WP
SR-PP4
SR-WB4WP
Line Array Speakers Type H
SR-H2L
SR-H2S
SR-H3L
SR-H3S
SR-H2L
Power Handling Capacity
• Slim line array with excellent directivity
• Narrow 84 mm design allows speakers to fit in well withthe interior decor
of the venue
• Sync-Drive (Synchronous Nexus Control) technology create ideal linear
sound source
• Clear sound with reduced attenuation over distance
• Speakers are reflection-free and feedback resistant
• Curved speaker models for improved vertical dispersion
• A wide variety of optional mounting bracket is available
• Optional matching transformer MT-S0301 for high-impedance operation
SR-H2S
SR-H3L
Continuous program: 180W
Continuous program: 360W
Rated Impedance
8Ω
Sensitivity (1W, 1m)
Frequency Response
92dB
80 – 18,000Hz
Speaker Component
90 – 17,000Hz
95dB
92dB
110 – 18,000Hz
90 – 17,000Hz
7cm cone-type x 9
Directivity Angle
Finish
SR-H3S
Speakers
160 (W) x 895 (H) x 255(D)mm
Weight
Conference
Systesm
Dimensions
7cm cone-type x 16
Horizontal: 90°/Vertical: 0°
Horizontal: 90°/Vertical: 20°
Enclosure:
MDF, white, paint
Front grille:
Punched steel plate, white, acrylic paint
Dimensions
84 (W) x 668.4 (H) x 115 (D)mm
84 (W) x 663.4 (H) x 115 (D)mm
84 (W) x 1,186 (H) x 115 (D)mm
84 (W) x 1,177.2 (H) x 157 (D)mm
Weight
4.4kg
4.2kg
7.6kg
7.9kg
TOA Electronics, Inc. 56
Security
& Safety
Front grille:
Horizontal: 90°/Vertical: 10°
MDF, white, paint
Reference
Enclosure:
Megaphones
Directivity Angle
Intercom
Speaker Component
Mixers
Frequency Response
Finish
SR-S4SWP
Continuous program: 600W
Wireless
Systems
SR-S4L
SR-S4LWP
Rack Mount Equipment,
Network Audio and Others
Line Array Speaker Type S
Microphones
Line Array Speakers Type H Optional Accessories
Wireless
Systems
Rack Mount Equipment,
Network Audio and Others
vExtension Plate
vFlying Bracket
vMatching Transformer
SR-EP3
SR-FB3
MT-S0301
vStand Adapter
vWall Tilt Bracket
vWall Mounting Bracket
SR-SA3
SR-TB3
SR-WB3
Mixers
Mechanically Steerable Line Array Speaker System
SR-MF1B
SR-MF1W
SR-ML1B
SR-ML1W
Speakers
• This slim system utilizes the line array speaker’s characteristics to provide uniform sound with little attenuation over distance
• Optimal sound coverage is assured by a built-in steering mechanism
that permits manual adjustment of the tilt and dispersion angles
• One or two low-frequency expander speakers can be combined with the
full-range speaker in any of several configurations to optimize performance for specific needs
• The system’s slim-line design featuring 4.5”-wide (114mm) enclosures,
and its availability in a choice of black or white, enables it for specific
needs
SR-MF1B/W
Enclosure
SR-ML1B/W
Sealed type
Bass-reflex type
Conference
Systesm
Power Handling Capacity
Continuous program: 240W
Rated Impedance
12Ω
24Ω
Sensitivity
89 dB (1W, 1m equivalent, measured at 8m)
84 dB (1W, 1m equivalent, measured at 8m)
Megaphones
Frequency Response
130Hz – 18kHz (when using an optional processor)
60 – 700Hz (when using an optional processor)
Speaker Components
2.8” (7cm) cone-type 4 and 2” (5cm) cone-type x 8
3.5” (9cm) cone-type
Directivity Angle
Horizontal: 100°
Vertical: Tilt 0 or -3°, Dispersion: 10, 15, 20, 25 or 30°
--
Input Terminal
Removable screw terminal
Enclosure
Finish
Front Grille
Aluminium
SR-MF1B; Punched-steel plate, black paint
SR-MF1W; Punched-steel plate, white paint
Dimensions
Intercom
Weight
SR-ML1B; Punched-steel plate, black paint
SR-ML1W; Punched-steel plate, white paint
158 (D)mm)× 872 (H) × 6.22” (D) (114 (W) × 34.33” (H) ×4.49” (W)
18.5 lb (8.4kg)
Tilt = -3°
16.1 lb (7.3kg)
Dispersion image
Tilt = 0°
Bolt positions
and
angles
30°
(Dispersion Angle)
Amplifiers
The Mechanical Steerable Array Speaker System consists of passive FR (Full-Range) Module and LF (Low-Frequency) Module to establish a simple
speaker system with a single FR Module or combination system with FR and LF Modules. The key feature is that the tilt and dispersion angle of the
FR Module are mechanically and manually adjustable on its hardware. Provides a low cost solution for spaces where the speakers need to aim at
downward seating/audience areas while they are mounted flat on the wall.
-3° (T
ilt Angle
) 0°
25°
20°
15°
10°
Security
& Safety
0°
-3°
Reference
10°
10°
15°
20°
25°
30°
57
TOA Electronics, Inc.
0°
15°
20°
25°
30°
Microphones
• For mobile or fixed installation e.g. in clubs, banquet rooms or schools,
etc
• Can be used as a floor monitor
• 2-way unit system equipped with a large diameter woofer (12”/15”) and
array tweeter
• Twin input terminal connectors (Speakon and screw terminals)
• Well-controlled sound coverage: 90°horizontal x 40°vertical
• Offers a built-in matching transformer, for use in high-impedance
applications
• A wide variety of optional mounting bracket is available
HS-1200BT/WT
HS-1500BT/WT
Continuous pink noise: 100W (Low impedance)
Sensitivity (1W, 1m)
97 dB
98 dB
Rated Impedance
8Ω/100V line; 170Ω, 330Ω, 670Ω/
70V line; 83Ω, 170Ω, 330Ω, 670Ω
8Ω/100V line; 170Ω, 330Ω, 670Ω/
70V line; 83Ω, 170Ω, 330Ω, 670Ω
Frequency Response
70 – 20,000 Hz
60 – 20,000 Hz
Speaker Component
Low: 30cm cone-type, High: Balanced dome tweeter x 6
Low: 38cm cone-type, High: Balanced dome tweeter x 6
Enclosure: Polypropylene, black or white/Punched net: Surface-treated steel plate, black or white
Dimensions
361 (W) x 448 (H) x 320 (D) mm [14.2 (W) x 17.6 (H) x 12.6 (D) in]
451 (W) x 560 (H) x 400(D) mm [17.8 (W) x 22 (H) x 15.7 (D) in]
Weight
10kg (22lbs)
14kg (30.9lbs)
vWall-Mount Bracket
vCeiling-Mount Bracket
vCeiling-Mount Angle Bracket
HY-1200HB
HY-1200HW
HY-1200VB
HY-C0801*
vCeiling-Mount Bracket
vWall-Mount Bracket
vWall-Mount Bracket
vCeiling-Mount Angle Bracket
HY-1200VW
HY-1500HB
HY-1500HW
HY-C0801W*
vCeiling-Mount Bracket
vCeiling-Mount Bracket
vWall-Mount Angle Bracket vWall-Mount Angle Bracket
HY-1500VB
HY-1500VW
HY-W0801*
vAttenuator
AT-025
AT-100
AT-100EMG
AT-10K
• Flush-mounted wall attenuators
• Volume can be adjusted in thirteen steps (AT-10K continuous)
• Push-in terminals
• Accepts two conductors for easy bridging
• 2 wire connection for normal speaker line attenuation
• 3 wire connection for emergency paging attenuator override (AT-100EMG)
TOA Electronics, Inc. 58
Reference
70 Volt Stepped Wall Attenuators
Security
& Safety
Intercom
HY-W0801W*
Megaphones
Conference
Systesm
vWall-Mount Bracket
Amplifiers
Finish
Mixers
Power Handling Capacity
Wireless
Systems
HS-1500BT
HS-1500WT
Speakers
HS-1200BT
HS-1200WT
Rack Mount Equipment,
Network Audio and Others
Coaxial Array Speakers
Microphones
Conference System
Wireless
Systems
Infrared Conference System TS-800/TS-900 Series
Rack Mount Equipment,
Network Audio and Others
• For efficient communications in any kind of conference
• Safe and secure infrared wireless technology
• Up to 96 active units (TS-900) or 64 active units (TS-800) per system
• Chairman unit features a priority speech key
• Auto Mic-Off function
• System with voting function (TS-900) or standard system (TS-800)
• Compact and lightweight chairman and delegate units
• No cabling makes installation easy
• Speaker restriction function
• Installation status checkup function
TS-900 Series System Example
TS-905/ TS-907
CD Player
PC
Mixers
TS-911
Switcher
Monitor
YM-1024
Amplifiers
TS-919
Amplifier
DA-250F
M-9000M2
TS-900
Speakers
TS-901
Ceiling Speaker
F-2852C
TS-912
TS-919 B4
TS-902
Microphone
Conference
Systesm
Image Drawing
Megaphones
F-2852C
Ceiling Speaker
Wired Microphone
TS-900 Series
Intercom
IR Versions
Wired Versions
Security
& Safety
vChairman Unit
vDelegate Unit
vChairman Unit
vDelegate Unit
TS-901
TS-902
TS-911
TS-912
Reference
• 3 voting keys
• Channel selector for conference language
• 2 different versions for chairman and delegates
• To prevent feedback, the built-in speaker is turned off while the microphone is on
• 2 headphone jacks
59
TOA Electronics, Inc.
Microphones
TS-905/ TS-907
YM-1024
DVD Player
Recorder
TS-800
TS-801
TS-802
Mixers
Rack Mount Equipment,
Network Audio and Others
TS-800 Series System Example
Wireless
Systems
Infrared Conference System TS-800/TS-900 Series
IR Versions
TS-801
TS-802
Wired Versions
vChairman Unit
vDelegate Unit
TS-811
TS-812
vCentral Unit
TS-800
• 2 different versions for chairman and delegates
• To prevent feedback, the built-in speaker is
turned off while the microphone is on
• 2 headphone jacks
• Up to 64 active units per system
• Audio input from a wired microphone or other sound source
• 1 line and 1 recording output
Infrared Conference System TS-800/TS-900 Series Optional Accessories
vAC Adapter
vBattery Charger
AD-0910
BC-900 UL
vRechargeable
Lithium-Ion Battery
vMicrophone
vMicrophone
vTS-918 US
vInfrared Transmitter/Receiver
TS-903
TS-904
TS-918 US
TS-905
vTS-919 B1
vTS-919 B4
vDistributor
vInfrared Transmitter/Receiver
TS-919 B1
TS-919 B4
YW-1022
TS-907
BP-900 UL
vRack Mount Bracket
Conference
Systesm
Speakers
vDelegate Unit
Megaphones
• Works with TS-811/812 & TS-911/912 wired stations
(requires TS-918 and TS-919 B1 or B4)
• Compatible with exisitingTS-800/900 IR stations (replaces TS-900 controller)
• Adds voting & interpretation features to wired configurations
• Wired & wireless stations may be combined to create larger “hybrid”
configurations
• Total station capacity: 192 stations (combined wired & wireless)
• Includes Feedback Suppressor function
• Control & monitoring via free PC Software using USB connection
• Individual station volume control via RS-232
vChairman Unit
MB-TS900
Reference
vDistributor
Intercom
TS-910
Security
& Safety
vCentral Unit
Amplifiers
Microphone
YW-1024
TOA Electronics, Inc. 60
Microphones
Wired Conference System TS-770 Series
Wireless
Systems
• Maximum 70 Chairman and Delegate Units (up to 35 units* per line) are connectable to one Central Unit
• *If the TS-775 Remote Delegate Interface Unit is used, up to 35 TS-775 Remote Delegate Interface Units can be connected per line also
• Expandable to maximum 210 units by connecting 2 additional Central Units
• Equipped with an All-Mic-On function that simultaneously turns on all microphones for sound collecting and recording of all units
• Remote conferencing is possible, enabling people at a remote location to participate in the conference
• The Test Function feature enables easy checking of the connection status of all connected units
• Number of simultaneously usable delegate units can be selected
• Automatic Mic-Off function (TIME OUT)
Rack Mount Equipment,
Network Audio and Others
TS-770 Series System Example
Mixers
TS-771 Chairman unit
TS-770 Central unit
Amplifiers
TS-770 Central unit
TS-771 Chairman unit
TS-772 Delegate units
TS-772 Delegate unit
TS-775 Remote Delegate Interface unit
Handset modular
connector
PABX
C/O
Speakers
Telephone body
TS-770 Central unit
TS-771 Chairman unit
Telephone handset
TS-772 Delegate unit
TS-775 Remote Delegate Interface unit
Conference
Systesm
PC
PC
Internet
Megaphones
Intercom
vCentral Unit
vRemote Delegate Interface Unit
TS-770
TS-775
• Supplies DC Power to all units, with lamp indicator
• Jack for microphone input, and AUX input
• Microphone, AUX, line (for conference unit’s built-in speaker)
and chime (on chairman’s unit) volume controls
• Equalizer input
• Recording output
• For connection of external delegates via telephone, IP
telephone (up to 70 PCs per TS-770) and mobile phone
• Line input for other conference units
• Speech method selectable; Auto: Voice-activated automatic
switching; Manual: Talk-key activated
vChairman Unit
vDelegate Unit
TS-771
TS-772
• To prevent feedback, the built-in speaker is
turned off while the microphone is on
• Press-to-talk priority speech button activates
chime and overrides delegate unit (TS-771 only)
• Headphone/recording output
Security
& Safety
Wired Conference System TS-770 Series Optional Accessories
Reference
61
vMicrophone
vMicrophone
vExtension Cord
vExtension Cord
TS-773
TS-774
YR-770-2M
YR-770-10M
TOA Electronics, Inc.
Microphones
• Long-lasting battery life
• Compact and lightweight
• Neodymium magnets for high audio performance
• Extended audible range
Splashproof Hand Grip Type Megaphones
ER-1203
ER-1206
• 10W max.
• IPX5*
ER-1206S
• 10W max.
• IPX5*
• with siren
ER-1206W
• 10W max.
• IPX5*
• with whistle
vWall Mount Bracket
SP-1100
• Applicable models:
ER-1203/ER-1206/
ER-1206S/ER-1206W
Hand Grip Type Megaphones
ER-1215
• 23W max.
ER-1215S
• 23W max.
• with siren
ER-3215
• 23W max.
Speakers
ER-520W
• 10W max.
• with whistle
Shoulder Type Megaphones
• 23W max.
ER-2215W
• 23W max.
• with whistle
ER-2230W
• 45W max.
• with whistle
ER-2930W
• 45W max.
• with whistle and wireless
function
vUHF Wireless
Tuner Unit
WTU-4800
Megaphones
ER-2215
Conference
Systesm
ER-520S
• 10W max.
• with siren
Hands-Free Type Megaphones
vPersonal PA System
ER-1000
• Compact and lightweight body
• Maximum output power of 10 W
• Built-in electronic whistle
• 2 mic inputs and 1 aux input
• Battery status indicator
• Supplied hand-held type microphone equipped with press-to-talk
switch and volume control
• Approx. 10 hours of operation with 8 R6P manganese dioxide
batteries (without use of whistle)
• Ideal for school teachers, sports instructors, tour
guides, trade show personnel, and police officers,
all of whom can benefit from the system’s hands free convenience
• Ultra-light body of only about 480 g, yet with a maximum output of 10W
and a maximum audible range of 80 meters
• Supplied headset microphone
• 80 cm long elastic waist belt extendable to up to 120 cm
• A 30 cm extension belt is included.
• Large rotating volume control and the independent power on/off switch
for easy knob and switch operation even with a gloved hand
• AUX input terminal
• 8 hours operation with 6 alkaline AA batteries
Reference
vCompact Power Megaphone
ER-604W
Intercom
• 10W max.
Security
& Safety
ER-520
Amplifiers
Mixers
• 4W max.
• IPX5*
Wireless
Systems
• Anti-bacterial treatment for all models (mouth/microphone and handle)
• High durability ABS or ASA resin construction
• Wide frequency range for enhanced audio quality
• Polyimide speaker diaphragms
• Wireless Function (ER-2930W only)
Rack Mount Equipment,
Network Audio and Others
Megaphones
TOA Electronics, Inc. 62
Microphones
Intercom
Wireless
Systems
IP Network Intercom
Rack Mount Equipment,
Network Audio and Others
The N-8000 Series IP Network Intercom Series offers flexible communications for up to 3,072 stations on existing corporate local and wide area
data networks. It is a network-compatible intercom system using packet audio technology. Built on TOA’s proven NX-100 network audio technology,
the IP Intercom products occupy minimal network bandwidth (130 kbps maximum) for station-to-station calls and can be controlled and monitored
through software or web browser. Programmable system functions include 192 paging zones, time-based call forwarding and scan monitoring. Monitoring can be real-time over the internet as the system is not server based. System frequency response extends to 7 kHz, allowing even PA-delivered announcements to be extremely clear and easily intelligible. Communications can be selected by the user as needed -- the “Master-to-Master”
system optimized for full duplex conversation at such venues as factories and hospitals, or the “Master-to-Sub” (half duplex) system which is particularily suited for schools, prisons, and similar locations.
N-8000 Series IP Base Station
Mixers
Amplifiers
vIP Multifunctional Master Station
vIP Standard Master Station
N-8600MS
N-8510MS
• System Allows Full-duplex conversation in
Hands-free mode with new stations
• External mic and headset connections for hands
free operation
• LCD, speed-dial, Power-over-Ethernet
• PoE or external power
• Full Duplex communication with use of handset
• Connects directly to network (10/100Base TX)
• Occupies one network node (192 max)
• Two RJ-45 network connectors (one for network,
one for PC)
• Contact input terminal
• Optional wall-mount bracket, model YC-280
• PoE or external power
vIP Remote Microphone Station
N-8610RM
Speakers
• Allows multi-zone paging• Employs packet audio technology
• Connects to a LAN or WAN network
• Power can be supplied to the microphone using a
PoE-compatible switching hub
• PTT key
• PoE or external power
Conference
Systesm
N-8600MS
Power Source
N-8510MS
N-8610RM
Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))
Power Consumption
Use of the AC adapter (12 V DC): 4W (microphone only),
8.5W (when connecting 4 RM-210 Extension units)
Use of the PoE (48 V DC): 5.2W (microphone only),
7.5W (when connecting 4 RM-210 Extension units)
3W (max.)
Speech Method
Hands-free conversation (use of goose-neck microphone)
Hands-free or handset conversation
Megaphones
Audio Frequency Range
300 Hz – 7 kHz
External Speaker Terminal
Maximum output 0.5W, 8Ω, screwless
connector (2P)
--
--
External Control Input Terminal
--
No-voltage contact input, open voltage: 5V DC
short-circuit current: 5mA or less, screwless
connector (2 pins)
--
No. of Connectable Expansion
--
--
Max.4 units (maximum 2 units at PoE power supply)
Intercom
Network Section
Network I/F
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission System
Unicast, Multicast
Voice Packet Loss Recovery
Silence insertion
Audio Delay Time
80ms, 320ms (controllable on the software)
Security
& Safety
Finish
Body, Handset: ABS resin, gray
148 (W) x 208 (H) x 70.5 (D)mm (excluding a curl cord section)
5.8 (W) x 8.2 (H) x 2.8 (D)in (excluding a curl cord section)
Dimensions
Weight
Option
Reference
63
TOA Electronics, Inc.
770g (1.7lbs)
740g (1.6lbs)
Wall mounting bracket: YC-280
AC adapter: AD-1215P
ABS resin, blueishgray
190 (W) x 76.5 (H) x 215 (D)mm (excluding microphone)
7.5 (W) x 3 (H) x 8.5 (D)in (excluding microphone)
700g (1.5lbs)
Remote microphone extension: RM-210 S
AC adapter: AD-1215P
Microphones
vIP Door Station Board Unit
N-8640DS
N-8640SB
• Outdoor IP door station
• IP65 rated, for dust and water protection, chemical
resistant for use in industrial/harsh environments
• Equipped with 1 channel of control input, 5 channels
of control outputs (including 1 channel of relay control output)
• External speaker connection 0.5W @ 8 Ohms.
• Full-duplex conversation with Master Stations via AEC (Automatic Echo
Canceller)
• PoE or external power
• Board unit for custom application
• Equipped with 1 channel of control input, 5 channels of control outputs
(including 1 channel of relay control output)
• External speaker connection 0.5W @ 8 Ohms
• Full-duplex conversation with Master Stations via AEC (Automatic Echo
Canceller)
Wireless
Systems
vIP Door Station
Rack Mount Equipment,
Network Audio and Others
N-8000 Series IP Base Station
vIP Indoor Station
• Indoor IP door station
• Equipped with 1 channel of control input, 5 channels of
control outputs (including 1 channel of relay control output)
• External speaker connection 0.5W @ 8 Ohms
• Full-duplex conversation with Master Stations via AEC
(Automatic Echo Canceller)
• PoE or external power
N-8640DS
Power Source
N-8650DS
N-8640SB
Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option))
Power Consumption
5W (max.)
Hands-free conversation
Audio Frequency Range
300 Hz – 7 kHz
Contact Input
1 channel, no-voltage make contact input, open circuit voltage: 5V DC, short circuit current: 10mA or less, unterminated ends
Open collector output, 4 channels, withstand voltage: 30V DC, control current; Max. 50mA (4 output 1COMMON), unterminated ends
Relay contact output, 1 channel, withstand voltage; 30V DC. control current: Max. 500mA, unterminated ends
Contact Output
External Speaker Terminal
Speakers
Speech Method
0.5W, 8Ω
Network I/F
Conference
Systesm
Network Section
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission System
Unicast, Multicast
Voice Packet Loss Recovery
Silence insertion
80ms, 320ms (controllable on the software)
Dust/Water Protection
IP65 (Note that panel edges must be sealed at installation.)
--
Finish
Panel: Stainless steel, hairline/ Call button: Metal
ABS resin, dark gray
--
Dimensions
115 (W) x 162 (H) x 58.5 (D)mm
4.5 (H) x 6.4 (H) x 2.3 (D)in
117.2 (W) x 162 (H) x 60 (D)mm
4.6 (W) x 6.4 (H) x 2.3 (D)in
79 (W) x 134 (H) x 53 (D)mm
3.1 (W) x 5.3 (H) x 2.1 (D)in
Weight
780g (1.7lbs)
400g (0.8lbs)
350g (0.8lbs)
For flush-mount: 3-gang electrical box or Back Box YC-150, Wall surface-mount: Wall mount Box YS-13A,
AC adapter: AD-1215P
Megaphones
Audio Delay Time
AC adapter: AD-1215P
Intercom
Option
Amplifiers
Mixers
N-8650DS
Security
& Safety
Paging Function
N-8600MS
WAN
LAN
N-8600MS
or
N-8000AF
PA Amplifier
Speaker
N-8000MI
TOA Electronics, Inc. 64
Reference
Internet
IP-VPN
Microphones
N-8000 Series 2-Wire Type Station
Wireless
Systems
Rack Mount Equipment,
Network Audio and Others
Mixers
vMultifunctional Master Station
vStandard Master Station
N-8000MS
N-8010MS
• Full-Duplex communication is supported by
this station
• Two-wire connection to N-8000EX or
N-8010EX Exchange
• Handset or hands-free duplex communication
• Full-Duplex communication is supported by this
station
• Two-wire connection to N-8000EX or N-8010EX
Exchange
• Handset or hands-free duplex communication
vIndustrial-Use Master Station
vStandard Hands-Free Master Station
N-8020MS
N-8011MS
• Full-Duplex communication is supported by this
station
• Heavy duty dustproof and waterproof construction (IP54 rating)
• External speaker terminal (0.6 W / 8 ohms)
• Full-Duplex communication is supported by this
station (handset mode only)
• Two-wire connection to N-8000EX or N-8010EX
Exchange
• Hands-free duplex communication
N-8000MS
N-8010MS
Power Source
N-8011MS
Power Consumption
2.4W (max.)
Amplifiers
Wiring Method
1 set of twisted pair cable
Speech Method
Hands-free or handset conversation
Hands-free conversation
Audio Frequency Range
Max. 1500m (0.65mm. Loop resistance 170Ω)
Speakers
--
--
Open collector output (The contacts have
polarity.)/Withstand voltage: Max. 30V DC,
Control current: Max. 50mA, screwless
connector (2P)
0.6W, 8Ω, screwless connector (2P)
--
--
0.6W, 8Ω, screwless connector (2P)
--
--
--
IP54
Body: ABS resin, gray
Body, Handset: ABS resin, gray
92 (W) x 195 (H) x 56.1 (D)mm
3.6 (W) x 7.7 (H) x 2.2 (D)in
170 (W) x 220 (H) x 97.8 (D)mm
(excluding a curl cord section)
6.7 (W) x 8.7 (H) x 3.9 (D)in
(excluding a curl cord section)
400g (0.9lbs)
1kg (2.2lbs)
Wall mounting bracket: YC:290
Wall mounting bracket: YC-280
Dial-in Contact Output
--
External Speaker Terminal
Dust/Water Protection
Finish
Body, Handset: ABS resin, gray
Conference
Systesm
148 (W) x 208 (H) x 70.5 (D)mm(excluding a curl cord section)
5.2 (W) x 8.2 (H) x 2.8 (D)in (excluding a curl cord section)
Dimensions
800g (1.8lbs)
700g (1.5lbs)
Options
Wall mounting bracket: YC-280
Megaphones
Bank
Application
Example
Hands-free or handset conversation
300 – 7,000Hz
Transmission Range
Weight
N-8020MS
48V DC (supplied from the IP network intercom exchange)
Security office
Monitoring center
Recoding target station
Monitoring center
Control center
7:00~24:00
24:00~7:00
Forward busy
N-8600MS
Nighttime transfer
N-8600MS
N-8600MS
PC equipped with the N-8000
Recording Software
RS-170
Intercom
TOA
LAN
Security
& Safety
Speaker
Reference
Intercom
TOA
system
Intercom
N-8640DS
ATM
65
TOA Electronics, Inc.
system
•••
Intercom
N-8640DS
ATM
RS-170
Speaker
TOA
TOA
N-8640DS
system
N-8640DS
ATM
system
RS-170
Intercom
system
•••
TOA
Speaker
N-8000RS
Intercom
TOA
Intercom
system
Microphones
• Full-Duplex communication is supported by this station
(handset mode only)
• Two-wire connection to N-8000EX or N-8010EX Exchange
• Hands-free duplex communication
• External dial inputs (7, 8, 9 and C keys)
• Optional Handset, model RS-191
vHands-Free Master Station Board Unit
vDoor Station
N-8031SB
N-8050DS
• N-8031 PCB for custom station applications
• Speaker and microphone included
• Full-Duplex communication is supported by this station
• External dial inputs (7, 8, 9 and C keys) plus switch matrix connection
• LED Status Indicator output
• Half-Duplex communication is supported by this station
• Hands-free duplex communication
• Separate mic and speaker
• Control output (open collector)
• IP-54 rated
vHands-Free Substation Board Unit
vDoor Station
N-8050SB
Q-N-8050WP
• N-8050DS PCB for custom station applications
• Speaker and microphone included
• Full-Duplex communication is supported by this station
• Control output (open collector)
• Call switch input
• LED Status Indicator output
• Half-Duplex communication is supported by this station
• Hands-free duplex communication
• Separate mic and speaker
• Control output (open collector)
• IP-54 rated
• Weather-proof
N-8052-DS-Q
• Half-Duplex communication is supported by this station
• Hands-free duplex communication
• Separate mic and speaker
• Control output (open collector)
• IP-54 rated
N-8033MS
N-8031MS
N-8031SB
N-8050DS
Audio Frequency Range
Hands-free conversation
300 – 7,000Hz
Transmission Range
Max. 1500m (0.65mm. Loop resistance 170Ω)
--
--
No-voltage make contact input, open voltage: 5V DC,
short-circuit current: 1mA, screwless connector (5 pins)
External Dial Input
Open collector output, withstand voltage: Max. 30V DC, control current:
Max. 50mA, one shot: can be set from 1 to 9 sec, screw terminal (polarized)
---
--
--
Housing Protection
--
--
--
BS EN62262: 2002:
IK02 equivalent
--
--
Dust/Water Protection
IP65 (Note that panel
edges must be sealed at
installation.)
--
--
IP65 (Note that panel
edges must be sealed
at installation.)
--
--
Resistance to Environment
Chemical Resistant
--
--
--
--
--
--
Panel: Stainless steel,
hairline/ Call button:
Metal
--
Panel: Stainless steel,
hairline
Call Switch: Metal, silver
115 (W) x 254 (H) x 54.6 (D)mm
4.5 (W) x 10 (H) x 2.1 (D)in
70 (W) x 185 (H) x 20.6
(D)mm
2.6 (W) x 7.3 (H) x 0.8
(D)in
115 (W) x 162 (H) x 54
(D)mm
4.5 (W) x 6.4 (H) x 2.1
(D)in
67 (W) x 128.3 (H) x 26
(D)mm
2.6 (W) x 5 (H) x 1 (D)in
4.72” (W) × 4.72” (H) ×
1.95” (D)
119.9 (W) x 119.9 (H) x
49.5 (D)
850g (1.9lbs)
205g (including accessories (0.6lbs)
680g (1.5lbs)
100g (including accessories (0.2lbs)
0.6kg (1.27lbs)
Handset: RS-191
Flush-mount: 3-gang
electrical
box or Back Box YC-150
Wall surface-mount:
Wall mount Box YS-13A
--
2-gang electrical box:
YC-302, Indoor wallmount box: YC-822
Finish
Dimensions
Membrane switch (Front
pasting): Polyester film
Weight
Options
Back Box YC-841
Panel: Stainless steel
(SUS304), hairline
Flush-mount: Back Box,
YC-241
Wall surface-mount:
Wall mount Box YC-251
Handset: RS-191
TOA Electronics, Inc. 66
Intercom
Hands-free or handset conversation
Security
& Safety
1 set of twisted pair cable
Hands-free conversation
Megaphones
2.4W (max.)
Wiring Method
Contact Output
N-8052-DS-Q
Reference
Power Consumption
Speech Method
N-8050SB
48V DC (supplied from the IP network intercom exchange)
Conference
Systesm
vDoor Station
Power Source
Wireless
Systems
• IP-65 rated outdoor in-wall Master Station
• Chemical resistant for use in industrial/harsh environments
• One input for use with foot switch dialing
• Four contact outputs
Rack Mount Equipment,
Network Audio and Others
N-8031MS
Mixers
vFlush-Mount Hands-Free Master Station
N-8033MS
Speakers
vFlush-Mount Master Station
Amplifiers
N-8000 Series 2-Wire Type Station
Microphones
N-8000 Series Exchanges and Interface Units
Wireless
Systems
Rack Mount Equipment,
Network Audio and Others
vIP Network Intercom Exchange
vIP Network Intercom Exchange
N-8000EX
N-8010EX
• 10/100BaseTX Ethernet network connection
• Occupies one network node ( 192 max.)
• Sixteen (16) station capacity
• Speech links: 4 internal / 8 external
• Two (2) audio paging outputs (0 dBV)
• Two (2) relay outputs
• Stations connect to exchange via two-wire twisted pair
• Provides 48 VDC to each station
• Speech links: 1 internal / 2 external
• 10/100BaseTX Ethernet network connection
• Occupies one network node ( 192 max.)
• Includes rack-mount and wall-mount brackets
N-8000EX
N-8010EX
Power Source
120V AC, 50/60Hz
Power Consumption
50W (at rated), 75W (max.)
Interface Section or Station
Mixers
Speech Link
Internal: 4/External: 8
Internal: 1/External: 2
Line Capacity
Up to 16 stations
Wiring Method
1 set of twisted pair cables
Transmission Range
Paging Output
Max. 1500m (0.65mm. Loop resistance 170Ω)
Amplifiers
Audio: 2 channels Max. 0dB*, 600Ω, balanced, detachable terminal block
Control: 2 channels, no-voltage make contact output (24V DC/0.5A), removable terminal block
Station paging only
Network Section
Network I/F
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission System
Unicast, Multicast
Audio Packet Omission
Silence insertion
Speakers
Audio Delay Time
80ms, 320ms (Controllable on the software)
Finish
Pre-coated steel plate, black, 30% gloss
Dimensions
Weight
420 (W) x 44.3 (H) x 356 (D)mm / 16.5 (W) x 1.7 (H) x 14 (D)in
4.1kg (9lbs)
4.2kg (9.3lbs)
Conference
Systesm
Megaphones
vTelephone Interface Unit
vC/O Interface Unit
N-8000AL
N-8000CO
• 10/100BaseTX Ethernet network connection
• Occupies one network node (192 max.)
• Single telephone line allowing an analog telephone to be connected
• Allows any analog telephone to function as a master station
• 10/100BaseTX Ethernet network connection
• Occupies one network node (191 max - at least one node must be a
master station or N-8000/8010EX exchange)
• Analog central office line circuit allowing the stations to make and
receive calls to and from the telephone line
N-8000AL
Power Source
Power Consumption
N-8000CO
120V AC, 50/60Hz
8W (Max.)
7W (Max.)
Line: Public Switched telephone networks
Number of Lines
1 line
Intercom
Selective Signal Type
DTMF Signal
Signal System
--
Compatible with loop start signaling
Monitor Function
Line Loop detection
--
Control Function
Caller ID function
Wiring Method
-1 pair of twisted pair cable
Network Section
Security
& Safety
Network I/F
Network Protocol
Audio Packet Transmission System
Finish
Dimensions
Reference
67
10BASE-T/100BASE-TX (Automatic-Negotiation)
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Unicast, Multicast
Pre-coated steel plate, black, 30% gloss
210 (W) x 44.3 (H) x 267 (D)mm / 8.3 (W) x 1.7 (H) x 10.5 (D)in
Weight
1.7kg (3.7lbs)
Options
Rack mounting bracket: MB-15B-BK, MB-15B-J; Wall mounting bracket: YC-850
TOA Electronics, Inc.
Microphones
N-8000 Series Interface Units
vMulti Interface Unit
N-8000AF
N-8000MI
• 10/100BaseTX Ethernet network connection
• Occupies one network node (192 max.)
• One MIC/LINE audio line input
• One audio line output
• Eight contact inputs
• Time Synchronization input
• Built-in timer and chime
• 10/100BaseTX Ethernet network connection
• Occupies one network node (192 max.)
• Contact Bridge
• Sixteen contact inputs
• Sixteen relay outputs
• Telephone Interface (E&M type), two channels
vIP Interface Module (to interface with the SX-2000 system)
vDirect Select Unit
SX-200IP
N-8000DI
• 10BASE-T/100BASE-TX (Automatic-Negotiation)
• Voice sampling frequency of 16 kHz, 8 kHz (controllable
on the software); 48 kHz, sample rate is used for
SX-2000 system only
• Voice encoding method - Sub-band ADPCM, Cryptosystem
• Voice Packet Loss Recovery - Silence insertion
• Audio delay time of 80ms, 320ms (controllable on the software)
• 10/100BaseTX Ethernet network connection
• Occupies one network node (192 max.)
• 32 contact inputs
• 32 contact outputs
• Events may be activated by contact closures or master station dialing
commands
• Provides control interface to CCTV, door access and other external systems
Rack Mount Equipment,
Network Audio and Others
Power Consumption
21W (330mA) (max.)
16W (Max.)
7W (Max.)
Audio Input
Input: 2 inputs (2P/input), Max. 0dB*, under
600Ω, balanced, with a semi-fixed volume
for adjustment (0 to –25dB); Control: 2 inputs
(2P/input), no-voltage make contact input,
open voltage: 12V DC, short-circuit current:
10mA; Removable terminal block (8 pins)
--
1 input (transformer isolated), -58dB* to 0dB*,
2kΩ, balanced (MIC/LINE input, controllable on
the software) with input volume control knob,
removable terminal block (3 pins)
Audio Output
Output: 2 outputs (2P/output), Max. 0dB*,
under 600Ω, balanced; Control: 2 outputs
(2P/output), relay contact output, contact
capacity: 24V DC/0.5A Removable terminal
block (8 pins)
--
1 output (transformer isolated), 0dB*, 600Ω,
balanced, removable terminal block (3 pins)
Contact Input
16 inputs, no-voltage make contact input,
open voltage; 12V DC, short-circuit current:
10mA, removable terminal block (18 pins), (1
common terminal for 4 inputs)
32 inputs, no-voltage make contact input, open
voltage: 24V DC, short-circuit current: 5mA or
less, removable terminal block (20 pins)
8 inputs, no-voltage make contact input, open
voltage: 24V DC, short-circuit current: 5mA or
less, removable terminal block (10 pins), (1
common terminal for 4 inputs)
Contact Output
16 outputs, relay contact output, contact
capacity: 24V DC/0.5A, removable terminal
block (18 pins)
32 outputs, relay contact output, contact capacity: 24V DC/2 – 500mA, removable terminal
block (32 pins)
8 outputs, relay contact output, contact capacity:
24V DC/2 – 500mA, removable terminal block
(16 pins)
10BASE-T/100BASE-TX (Automatic-Negotiation)
Network Protocol
TCP/IP, UDP, ARP, ICMP, HTTP, RTP, IGMP
Audio Packet Transmission System
Unicast, Multicast
Voice Packet Loss Recovery
Silence insertion
--
Audio Delay Time
80ms, 320ms (Controllable on the software)
--
80ms, 320ms (Controllable on the software)
420 (W) x 44.3 (H) x 267 (D)mm
16.5 (W) x 1.7 (H) x 10.5 (D)in
2.8kg / 6.2lbs
--
Wall mounting bracket: YC-850
210 (W) x 44.3 (H) x 267 (D)mm
8.3 (W) x 1.7 (H) x 10.5 (D)in
1.7kg / 3.7lbs
Rack mounting bracket: MB-15B-BK, MB-15B-J
Wall mounting bracket: YC-850
Security
& Safety
420 (W) x 44.3 (H) x 239.5 (D)mm
16.5 (W) x 1.7 (H) x 9.4 (D)in
Intercom
Pre-coated steel plate, black, 30% gloss
Weight
Options
Silence insertion
Reference
Finish
Dimensions
Megaphones
Network Section
Network I/F
Mixers
Amplifiers
N-8000AF
120V AC, 50/60Hz
Speakers
N-8000DI
Conference
Systesm
N-8000MI
Power Source
Wireless
Systems
vAudio Interface Unit
TOA Electronics, Inc. 68
Microphones
N-8000 Series 2-Core Shielded Cable Type
Wireless
Systems
Rack Mount Equipment,
Network Audio and Others
Mixers
Amplifiers
Speakers
vSub-station Interface Unit
vSub-station Interface Unit
N-8000RS
N-8010RS
• 10/100BaseTX Ethernet network connection
• Occupies one network node (191 max - at least one node must be a
master station or N-8000/8010EX exchange)
• Up to 16 substations connectable using twisted pair shielded cable
• Speech links: 2
• 10/100BaseTX Ethernet network connection
• Occupies one network node (191 max - at least one node must be a
master station or N-8000/8010EX exchange)
• Up to 16 substations connectable using twisted pair shielded cable
• Speech links: 1
vSub-station (Indoor Type)
vSub-station (Indoor Vandal-Resistant Type)
RS-150
RS-160
• Provides half-duplex communication
• Hairline brushed stainless steel faceplate, #14 Gauge
• Connects to N-8000RS/N-8010RS
• May be programmed to communicate with a single master station
• Provides half-duplex communication
• Heavy-duty brushed stainless steel faceplate, #11 Gauge
• Vandal resistant call button and speaker plate
• May be programmed to communicate with a single master station
v Sub-station (Outdoor Vandal-Resistant Type)
vSubstation (ADA-Compliant Emergency Outdoor type)
RS-170
Q-RS-180BZ
• Provides half-duplex communication
• Vandal resistant call button and speaker plate
• Heavy-duty brushed stainless steel faceplate, #11 Gauge
• May be programmed to communicate with a single master station
• Weather resistant conformal printed circuit board coating
• ADA compliant with Braille labeling
• Large easy-access mushroom button
• Contact output for use with emergency lighting or access
control systems
• Works with N-8000RS & N-8010RS exchanges using shielded
twisted pair connection
vSub-station (Emergency Use)
vN-8000RS Adapter
RS-180
Q-N8000LC
• Vandal resistant call button and speaker plate
• Red Call Assurance LED for ADA-compliance
• Heavy-duty brushed stainless steel faceplate, #11 Gauge
• Weather resistant conformal printed circuit board coating
• Equipped with four channel outputs with level selection switch
• Accessory adapter for N-8000RS or N-8010RS Substation Interface Unit
• Converts the output signal of the interface unit into a line level audio
signal or a 25V line speaker output
Conference
Systesm
Megaphones
RS-180
RS-170
RS-160
RS-150
Control
Output
Open collector output: 24V DC, 30mA (The open collector
output is kept turned on till the conversation is finished
after the call button was pressed.)
--
--
--
Finish
Panel: Stainless steel (SUS304), hairline; Call Button:
Metal, red; Printed Circuit Board: Weather-resistant coating
Dimensions
4.72” (W) × 4.72” (H) × 2.30” (D)
119.9 (W) x 119.9 (H) x 58.4 (D)
Weight
1.26 lb (0.6kg)
Options
2-gang electrical box: YC-302, Indoor wall-mount box: YC-822, Outdor wall-mount box: YC-823
Panel: Stainless steel (SUS304), hairline
Call Button: Metal; Call Button: Resin, black
Panel: Stainless steel (SUS304), hairline
4.72” (W) × 4.72” (H) × 2.26” (D)
119.9 (W) x (119.9 (H) x 57.4 (D)
4.72” (W) × 4.72” (H) × 1.91” (D)
119.9 (W) x 119.9 (H) x 48.5 (D)
1.19 lb (0.5kg)
0.90 lb
2-gang electrical box: YC-302, Indoor wall-mount box: YC-822
Hospital Application Example
Intercom
Employee exit
Operation Room -1
Door Station
N-8050DS
Operation Room -20
Security
& Safety
N-8000EX
N-8033MS
N-8033MS
N-8000EX
Foot Control Switch
(3 stations)
N-8033MS
Electric Lock,
for unlocking, etc.
N-8033MS
Foot Control Switch
(1 station)
Control room
Reference
SW HUB
N-8011MS
N-8000DI
Indication Board LED
Pilot Lamp
69
TOA Electronics, Inc.
Microphones
RS-143
• Call button and privacy button with LED Indicators
• Connects to N-8000RS & N-8010RS exchanges via shielded
• Supports two-way (half-duplex) communication
twisted pair wire and 25V speaker for half-duplex
• Private, handset conversation is available using the RS-141
communication with assigned master station
• Prevents incoming calls, pages & scans by pushing the privacy switch • Optional RS-141 handset may also be used
• Connects to N-8000RS/8010RS using twisted two-core, shielded cable
vIP Intercom Switch Board
vIP Intercom Switch Panel
RS-142
RS-144
• Allows configuration with custom housing and switch
• May be programmed for dual-priority call or call into two
different master stations
• Connects to N-8000RS & N-8010RS exchanges via shielded
twisted pair wire and 25V speaker for half-duplex communication
with assigned master station
• Optional RS-141 handset may also be used
• May be programmed for dual-priority call or call into two
different masterstations
• Connects to N-8000RS & N-8010RS exchanges via shielded
twisted pair wire and 25V speaker for half-duplex communication
with assigned master station
• Optional RS-141 handset may also be used
RS-143
Momentary (EMERGENCY, NORMAL)
Privacy Switch
--
vOption Handset
RS-140
RS-141
Momentary
Amplifiers
RS-144
Call-in Switch
Latching
Wiring
Two-core shielded cable
Panel: Stainless steel, hairline
Call-in Switch: Resin, red
Privacy Switch (normal): Resin, white
Panel: Stainless steel, hairline
Call-in Switch: Resin, red
Privacy Switch (normal): Resin, white
2.76” (W) × 4.53” (H) × 1.13” (D) [70.1 (W) x 115.1 (H) x 28.7 (D)]
Weight
0.18 lb (81.7g)
Options
Handset: RS-141
Speakers
Dimensions
Panel: Stainless steel, hairline
Call-in Switch: Resin, red
Office
Conference
Systesm
School Application Example
Building 2
Building 1
Classrooms
RS-160
17
N-8600MS
1
16
32
33
48
Classrooms
RS-140
N-8000RS Exchange
Classrooms
N-8000RS Exchange
Megaphones
Finish
Rack Mount Equipment,
Network Audio and Others
vIP Intercom Switch Panel
RS-140
Mixers
vSwitch Panel
Wireless
Systems
N-8000 Series 2-Core Shielded Cable Type
Intercom
N-8000RS Exchange
LAN
N-8000MI
N-8000CO
8 zones selectable
16 zones selectable
other areas
Zone 1
Zone 6
Zone 1
Voice Alarm System /
Public Address System
Zone 12
TOA Electronics, Inc. 70
Reference
Telephone
PABX
Audio Interface for
Timer / Gong
Security
& Safety
N-8000AF
Microphones
N-8000 Series 4-Wire Type
Wireless
Systems
Rack Mount Equipment,
Network Audio and Others
Mixers
Amplifiers
Speakers
Conference
Systesm
vSub-station Interface Unit
vOption Handset
N-8400RS
RS-481
• 10/100BaseTX Ethernet network connection
• Occupies one network node (191 max - at least one node must be a
master station or N-8000/8010EX exchange)
• Up to 16 substations connectable using 2 sets of twisted pair cables
• Speech links: 1
• Two-way, half-duplex communication using any 25V
wall/ceiling speaker
• Prevents incoming calls by pushing a privacy switch
vAnalog Standard Master Station
vSub-station (Video Intercom)
N-8410MS
RS-480VSET
• Low-cost analog Master Station operates on 4-wire
connection with N-8400RS
• Complete system can be configured on one exchange
with RS-4xx substations
• Color video camera
• Indoor and outdoor use
• Easy connection via CAT5
• Supplied power interface
vSub-station (Emergency Use)
vSub-station (Outdoor Vandal-Resistant Type)
RS-480
RS-470
• Provides half-duplex communication
• Dustproof and waterproof construction (IP54 rating)
• Heavy-duty brushed stainless steel faceplate
• Red vandal resistant call button
• Control output - open collector type for external relay control
• Weather resistant conformal printed circuit board coating
• Built-in electret condenser microphone
• Provides half-duplex communication
• Dustproof and waterproof construction (IP54 rating)
• Heavy-duty brushed stainless steel faceplate
• Vandal resistant call button
• Weather resistant conformal printed circuit board coating
• Built-in electret condenser microphone
• Connects to N-8400RS using two twisted pair cable
vSub-station (Indoor Vandal-Resistant Type)
vSub-station (Indoor Type)
RS-460
RS-450
• Provides half-duplex communication
• Heavy-duty brushed stainless steel faceplate
• Vandal resistant call button and speaker plate
• Built-in electret condenser microphone
• Connects to N-8400RS using two twisted pair cable
• Provides half-duplex communication
• Hairline brushed stainless steel faceplate
• Built-in electret condenser microphone
• Connects to N-8400RS using two twisted pair cable
vIP Intercom Switch Board
RS-442
Megaphones
• Switch board designed for use with the N-8400RS 4-Wire Substation Interface Unit
• Switch panels can be created to meet intended purposes by combining the RS-142 with
the separately prepared operation panel having 3 switches to be used as call buttons
• Also can be used in connection with the RS-481 Ip Intercom Optional Handset
RS-480
RS-470
Call-in Switch
Control Output
-Twisted pair cables (2-pair)
Intercom
Dust/Water Protection
IP54
--
Security
& Safety
Finish
Panel: Stainless steel, hairline
Call Switch: Metal, red
Circuit board: Weather-resistant coating
Dimensions
4.72” (W) × 4.72” (H) × 1.99” (D)
119.9 (W) x 119.9 (H) x 50.6 (D)
Weight
1.27 lb (0.6kg)
1.21 lb (0.5kg)
Options
2-gang electrical box: YC-302,
Handset: RS-481,
Indoor wall-mount box: YC-822, Outdor
wall-mount box: YC-823
2-gang electrical box: YC-302,
Indoor wall-mount box: YC-822,
Outdor wall-mount box: YC-823
Reference
TOA Electronics, Inc.
RS-450
Momentary (Emergency call: Press twice within 400 ms)
Open collector output: 30V DC, 30mA
Wiring
71
RS-460
Panel: Stainless steel, hairline
Call Switch: Metal, silver
4.72” (W) × 4.72” (H) × 1.95” (D)
119.9 (W) x 119.9 (H) x 49.5 (D)
1.19 lb (0.5kg)
Panel: Stainless steel, hairline
Call Switch: Resin, black
4.72” (W) × 4.72” (H) × 1.63” (D)
119.9 (W) x 119.9 (H) x 41.4 (D)
1.12 lb (0.5kg)
2-gang electrical box: YC-302, Indoor wall-mount box: YC-822
Microphones
The N-8000SG Q SIP Gateway allows you to connect the N-8000 IP Intercom System to a SIP phone system. Communication can be established from the N-8000 to the SIP phone system and vice versa. This also allows up to five
conversations at one time with the ability to initiate a page and access the door remote control features.
Wireless
Systems
SIP Gateway
Interconnection between N-8000 system and SIP system
Rack Mount Equipment,
Network Audio and Others
• Call and transfer from N-8000 to SIP, and vice versa
Digital domain connection
• Audio conversion from N-8000 to SIP and vice versa
• N-8000 uses G.722, fs=16kHz/8kHz, 16bit; SIP uses G.711 u-law
5 speech paths at the same time
Mixers
• 5 conversations with SIP and N-8000 at the same time
• 5 paging zones from SIP telephone at the same time
• e.g., 2 conversations and 3 paging zones in total at the same time|
Additional functions from SIP system
Reference
Security
& Safety
Intercom
Megaphones
Conference
Systesm
Speakers
Amplifiers
• Paging function from SIP telephone to N-8000 system
• “Door remote control” from SIP telephone to N-8050DS, N-8640/50DS
TOA Electronics, Inc. 72
Microphones
N-8000 Series Optional Accessories
Wireless
Systems
Rack Mount Equipment,
Network Audio and Others
Mixers
Amplifiers
Speakers
Conference
Systesm
Megaphones
vAC Adapter
vSurface-Mount Back Box
AD-1215P
YS-13A
• AC adapter to operate the IP Station on AC
• Designed to surface-mount N-8050DS and N-8640DS on a wall
vFlush-Mount Back Box
vFlush-Mount Back Box
YC-150
YC-241
• Designed to flush-mount N-8050DS and N-8640DS on a wall
• Designed to surface-mount N-8031MS on a wall
vSurface-Mount Back Box
vWall-Mount Bracket
YC-251
YC-290
• Designed to mount N-8031MS on a wall
• Designed to mount N-8011MS on a wall
vWall-Mount Bracket
v2-Gang Electrical Box
YC-280
YC-302
• Designed to mount N-8000MS, N-8010MS, N-8020MS,
N-8410MS, N-8510MS and N-8600MS on a wall
• Designed to mount RS-150, RS-160, RS-170,RS-180,
RS-450, RS-460, RS-470 and RS-480 on a wall
vIndoor Wall-Mount Box
vWall-Mount Bracket
YC-822
YC-850
• Designed to mount RS-150, RS-160, RS-170, RS-180,
RS-450, RS-460, RS-470 and RS-480 on a wall
• Designed to mount N-8000RS, N-8010RS,N-8400RS,
N-8000DI, N-8000AF, N-8000AL and N-8000CO on a wall
vOutdoor Wall-Mount Box
vBack Box
YC-841
• Designed to mount RS-170, RS-180, RS-470 and RS-480 on a wall
• Designed to flush-mount N-8033MS on a wall
vHalf Width Blank Panel
vRack Joint Bracket
MB-15B-BK
MB-15B-J
• Used to mount a one-unit size component that is
210 mm ( 8.27”) in width in a component rack
• Used for side-by-side connection of two one-unit size components
that are 210 mm (8.27”) in width in a component rack
Intercom
YC-823
Security
& Safety
Reference
73
TOA Electronics, Inc.
Desk-top
Microphones
Applicable Exchanges/
Interfaces
Wall-mount
Optional
Bracket
Wireless
Systems
Station Selection Chart
N-8610RM
Rack Mount Equipment,
Network Audio and Others
Master/
Door Stations
IP Base
WB-200RM
N-8640SB
YC-280
N-8600MS
N-8640DS
Mixers
YC-280
N-8650DS
N-8510MS
Amplifiers
YC-280
N-8050DS
YC-280
N-8000EX
Speakers
N-8010MS
YC-290
N-8031MS
N-8033MS
N-8011MS
N-8010EX
YC-280
N-8020MS
N-8050SB
N-8031SB
RS-150
RS-160
RS-140
RS-170
N-8000RS
Megaphones
Outdoor type
RS-142
RS-143
Q-RS-180BZ
RS-450
RS-460
RS-470
N-8410MS
N-8400RS
RS-442
RS-480
Reference
YC-280
Security
& Safety
N-8010RS
RS-144
Intercom
RS-180
RS Sub-stations
4-wire Type
2-core Shielded Type
Vandal-resistant type
Conference
Systesm
Master/Door Stations
2-Wire Type
N-8000MS
RS-480VSET
TOA Electronics, Inc. 74
Microphones
N-8000 System Overview
Direct Network Connection
Wireless
Systems
LAN
N-8510MS
N-8600MS
Speaker
Rack Mount Equipment,
Network Audio and Others
N-8650DS
N-8610RM
N-8640DS
Door control
Speaker
Mixers
2-Wire Connection
Amplifiers
N-8000EX / 8010EX
PA Amplifier
Speaker
Speakers
Conference
Systesm
N-8020MS
N-8033MS
N-8000MS
Megaphones
Foot Control Switch
N-8010MS
N-8011MS
Speaker
RS-191
N-8031MS
Revolving Light
Speaker
N-8050DS
Door Control
Foot Control Switch
Intercom
System Specifications
Security
& Safety
LAN Connections
BGM
Max. 192 units (total no. of Exchanges,
Interface Units and IP stations)
Max. 8 channels (number of channels
selectable from a station)
Reference
External Contact Output
[Network Relations]
Audio Delay Time
80 ms/320 ms; changeable
Max. 768 links (4 links for each of 192
connected N-8000EX Exchanges)
Max. 384 units (2 units for each of 192
connected Multi-Interface units)
N-8000MI
Max. 3,072 (16 outputs for each of 192
connected Multi-Interface units)
N-8000DI
Max. 6,144 (32 outputs for each of 192
connected Direct Select units)
N-8000AF
Max. 1,536 (8 outputs for each of 192
connected Audio Interface units)
Station Connections
PBX Interface
Max. 3,072 stations (16 stations
connected to each of 192 Exchanges)
Max. 384 units (2 units for each of 192
connected Multi-Interface units)
Voice Links
Tie-Line Interface
Paging
Outside-Line Interface
External Contact Input
Max. 130 Kbps (two-way)/per call
Zones
Max. 192 zones
Telephone Interface
Paging Outputs
Max. 384 outputs (2 outputs for each of
192 connected N-8000 Exchanges or
Multi-Interface units)
75
TOA Electronics, Inc.
Max. 192 units
Max. 192 units (when 192 Telephone
Interface units are connected)
N-8000MI
Max. 3,072 (16 inputs for each of 192
connected Multi-Interface units)
N-8000DI
Max. 6,144 (32 inputs for each of 192
connected Direct Select units)
N-8000AF
Max. 1,536 (8 inputs for each of 192
connected Audio Interface units)
Connection Delay Time
Max. 1 second (when 191 multicast
paging destinations are set)
Bandwidth Used
Max. 2.08 Mbps (one-way)/unicast
paging to 16 locations
N-8000AF
N-8400RS
N-8000DI
N-8410MS
Digital announcer
RS-450
Amplifier
2
10
1
20
3
10
2
20
4
10
3
20
RS-460
4
20
Recorder
Operation panel
RS-470
(enables colorstation display & remote call from)
N-8000MI
RS-480
Speaker
Revolving Light
RS-481
N-8000AL
Contact
Input
Digital Announcer
Microphones
Mixers
101
Amplifiers
Ex. Activate Alarm
equipment.
2-Core Shielded Wire Connection
N-8000RS/8010RS
Contact
Output
Speakers
Contact
Output
Contact
Input
Rack Mount Equipment,
Network Audio and Others
WAN
Wireless
Systems
4-Wire Connection
Conference
Systesm
Analog Telephone
Amplifier
PBX
RS-150
Megaphones
N-8000CO
Speaker
RS-160
• PBX Connection • Office line connection
• Tie-line connection • BGM
• External equipment control
• Remote door control • Conversation recording
• External input broadcast • Paging
• Paging interlock contact output control
• Call station indicator • CCTV interlock
• Remote dialing • Direct select
• Contact bridge • System diagnosis
• Time signal • Time correction
Intercom
RS-170
A variety of convenient functions
• Voice calling
• Hands-free conversation
• Automatic connection
• Continuous call
• One-touch dialing
• Call hold
• Automatic call forwarding
• Busy call
• Emergency call interruption
• Paging call
• Emergency all-group paging
• Emergency message broadcasts
• Paging response
• Scan monitor
• Three-party conference
• Door remote
• Emergency paging
• Audio trigger
RS-180
Security
& Safety
Permits the creation of a wide
variety of system configurations
through the free combination of
individual interface units
Telephone
RS-140
RS-143
RS-144
RS-141
Speaker
TOA Electronics, Inc. 76
Reference
EXES-7000/6000/2000
Microphones
Security & Safety
Wireless
Systems
Voice Evacuation Systems
Rack Mount Equipment,
Network Audio and Others
Introducing a scalable new system for configuring versatile and highly effective PA applications. The SX-2000 Series is in compliance with the EN 54
Standard, and features new matrixing capabilities, so a single system can have its components distributed in different locations, yet under centralized control. Ideal for large-scale installations ranging over multiple buildings as well as local systems, the versatile SX-2000 Series is particularly
well-suited for airports and railway stations, factories, shopping malls and large offices. Versatility is ensured by such features as a dual power
source and redundant backups for fail-safe operation, making it a cost-effective solution for virtually any installation, and without long lead times
or the expense of a custom system. A fireman’s microphone feature is also included, for enhanced effectiveness in an emergency. SX-2000 Series
components enable creation of an ideal system for all sorts of application requirements.
SX-2000 Series Audio Management System
Mixers
vSystem Manager
vAudio Output Unit
SX-2000SM
SX-2000AO
Amplifiers
• Used in combination with an optional audio input unit audio output unit • One control IN/OUT interface allows the
and remote microphone
number of control inputs and outputs to be increased
• Performs audio signal routing and priority control for the entire system • It is equipped with an emergency audio input and a 24 V
• Equipped with 8 control inputs, 8 control outputs, failure status outputs, emergency cutoff input
failure data inputs/switches, access indicators, mode indicators and
• Has two power inputs and can support a dual-redundant
failure indicators
power supply system
• Memory storage for 32 message files
Speakers
Conference
Systesm
Megaphones
vAudio Input Unit
vAudio Output Unit
SX-2100AI
SX-2100AO
• It features modular construction that
allows it to handle from two to eight inputs per unit
• Audio signals are transmitted digitally to the audio output
unit, but an analog audio output function (1 channel) enables
simultaneous all-zone calls for use in emergency situations
• Two channels of local audio inputs
with control inputs are provided as the dedicated audio inputs
• Includes an amplifier switching function that automatically switches
the power amplifier to the standby amplifier if the power amplifier fails,
and a surveillance function that self-diagnoses the speaker lines
vControl Output Unit
vControl Input Unit
SX-2000CO
SX-2000CI
• Equipped with 32 control output channels
• The indicators on the front panel monitor the control output line status
• Control output status when the CPU turns off can be set
• Equipped with 32 control input channels
• Control input line failure can be detected by connecting resistors to its line
• Has a function to supply a stabilized 24 V DC
vPower Amplifier
Intercom
VP-2064
VP-2122
VP-2241
VP-2421
Security
& Safety
• Requires VP-2000VX input module per channel
• DC power input
• Available in:
• [email protected][email protected][email protected][email protected]
Reference
77
TOA Electronics, Inc.
Microphones
vMic/Line Input Module (20 bits Monaural Type)
D-922E
D-922F
• Two balanced mic or line level inputs
• 20-bit A/D converters
• Adjustable input gain
• Phantom power
• Phoenix-style terminal block connectors
• Two balanced mic or line level inputs
• 20-bit A/D converters
• Adjustable input gain
• Phantom power
• XLR-F connectors
vStereo Select Input Module
vRemote Microphone Interface Module
D-936R
SX-200RM
• Four stereo connector pairs
• Unbalanced line level
• Individual input gain
• Programmable switching between connector pairs or summing mode
• Occupies two input channels
• RCA pin jack connectors
• Dedicated remote microphone module for the audio
input unit
• Can be used to connect two remote microphones
• Input sensitivity can be adjusted using the knobs
located near the RJ45 connector
SX-2000 Series Audio Management System Microphones and Optional Accessories
vRemote Microphone
RM-200SF
RM-200SA
• Equipped with an Emergency key, permitting it to be
used as a remote microphone for emergency broadcast
• Zone selection and microphone announcement can be
made at the time of emergency broadcast
• Offers a surveillance function to detect failures including
microphone element failure
• Equipped with 13 function switches
• Can be used to select individual zones or zone
groups a covered switch and corresponding indicators
• An external microphone input terminal is provided to
allow using a headset microphone, along with built-in
internal compressor circuitry
• TALK button may be a PTT or lock-type
• Emergency activation button is equipped with a cover
vTerminal Unit
vEmergency Power Supply Unit
RM-200RJ
VX-2000DS
• Designed to convert the RJ45 connector into a screw
terminal block
• Used to connect between a trunk cable and a feeder cable
in wiring a remote microphone
• Built-in indicator shows the voltage status of DC power
cable
• Supplies DC power to equipment
• Supports 2x/2v battery units for backup supply
• Distribution for 6 DC units
Intercom
vFireman’s Microphone
Wireless
Systems
vMic/Line Input Module (20 bits Monaural Type)
Rack Mount Equipment,
Network Audio and Others
• Two balanced mic or line level inputs
• 24-bit A/D converters
• Adjustable input gain
• Phantom power
• XLR-F connectors
Mixers
• Two balanced mic or line level inputs
• 24-bit A/D converters
• Adjustable input gain
• Phantom power
• Phoenix-style terminal block
Amplifiers
D-921F
Speakers
vMic/Line Input Module (24 bits Monaural Type)
D-921E
Conference
Systesm
vMic/Line Input Module (24 bits Monaural Type)
Megaphones
SX-2000 Series Audio Management System Modules
vRemote Microphone Extension Unit
Security
& Safety
RM-210
Reference
• Up to four remote microphones can be connected to a remote microphone
TOA Electronics, Inc. 78
Microphones
SX-2000 Series Audio Management System Optional Accessories
Wireless
Systems
Rack Mount Equipment,
Network Audio and Others
vIP Interface Module (to interface with the N-8000 System)
vPower Amplifier Input Module
SX-200IP
VP-200VX
• 10BASE-T/100BASE-TX (Automatic-Negotiation)
• Voice sampling frequency of 16 kHz, 8 kHz (controllable on the
software); 48 kHz, sample rate is used for SX-2000 system only
• Voice encoding method - Sub-band ADPCM, Cryptosystem
• Voice Packet Loss Recovery - Silence insertion
• Audio delay time of 80ms, 320ms (controllable on the software)
• Designed to be used in conjunction with
the VP-2241 power amplifier
SX-2000 + N-8000 System Example
Integration of SX-2000 with N-8000 IP Intercom strengthens system capabilities.
Mixers
A large system with up to 2048 zones is realized on the IP Network.
From a remote location, IP Station* can make a paging call to any selected zone(s).
* N-8610RM and N-8600MS.
Example: Distributed Factory Application
Amplifiers
WAN
LAN
N-8000
Speakers
SX-2000
LAN
Paging
(1 way)
2 way
communication
N-8000
SX-2000
Factory in China
Factory in Japan
Conference
Systesm
Fire alarm
SX-2000 System #1
Failure Indication
SX-2000CI
SX-2000CO
SX-2000SM
N-8000 IP Intercom System
Megaphones
2 way
communication
SW-HUB
SX-2100AO
SX-2100AI
SX-200IP
LAN
VP-3304
N-8610RM
Paging
Intercom
RM-200SA
VP-3304
SX-2100AI
RM-200SA
DC power
Security
& Safety
Auto
Announcement
Machines
BGM
Reference
LAN
SX LINK* (100Base/T)
RM LINK (DC power, Audio, Data)
PA LINK (Audio, Data)
CI/CO LINK
* Make the SX Link terminals completely independent from other LAN.
79
TOA Electronics, Inc.
Standby amplifier (VP-3304)
Max.
2048
zones
VX-3000DS
Lead-acid Battery
SX-2000 System #8
SX-2000SM
SW-HUB
SX-2100AI
SX-2100AO
vMeanwell Power Supply Frame
vRail Power Supply
RCP-100024
RCP-1UIU
SDR-480-24
• 24V- 40A Hot-swappable
power supply (Requires
RCP-1UIU Frame)
• 1U Power Supply Frame
for 3 RCP-100024
• 24V- 20A Fanless- DIN
Rail Power Supply
Microphones
NO
IMAGE
Rack Mount Equipment,
Network Audio and Others
vMeanwell Power Supply
Distributed Control System Example (University)
Campus C
Campus A
SX-2100AI
SW-HUB
SX-2000SM
SX-2100AI
SX-2000AO
Mixers
SX-2100AO
VP-2064
Amplifiers
DA-500FH
VP-2064
DA-500FH
Standby amplifier (VP-2064)
SX-2100AO
Auto Announcement
Machines
Speakers
Auto Announcement
Machines
Wireless
Systems
SX-2000 Series Audio Management System Optional Accessories
BGM
BGM
Campus B
SX-2100AI
VP-2064
SX-2100AI
Standby amplifier (VP-2064)
SX-2100AO
SX-2000CI
SW-HUB
Auto Announcement
Machines
SW-HUB
SW-HUB
BGM
VP-2064
Auto Announcement
Machines
DC power
VP-2064
Megaphones
Optical
fiber
network
Conference
Systesm
SX-2000CO
Standby amplifier (VP-2064)
SX-2100AO
SW-HUB
Lead-acid Battery
* Make the SX Link terminals completely independent from other LAN.
VP-2064
Standby amplifier (VP-2064)
Reference
SX LINK* (100Base/T)
RM LINK (DC power, Audio, Data)
PA LINK (Audio, Data)
CI/CO LINK
Security
& Safety
VX-2000DS
Intercom
BGM
TOA Electronics, Inc. 80
Microphones
VM-3000 Series Integrated Voice Evacuation System
Wireless
Systems
The UL-rated VM-3000 Series is an Integrated Voice Evacuation System ideal for small and medium-sized applications. It incorporates such emergency functions as continuous speaker line monitoring and a built-in voice alarm. This easy-to-install system also offers PA broadcasting, paging
and BGM functions that ensure consistently high intelligibility. The VM-3000 Series is digitally audio processed and controlled, and may be set up
and operated directly by using the controls and LCD display on the front panel. A dedicated PC software configuration capability is also provided for
establishing settings via LAN. The incorporation of wide-ranging functional capabilities, superb reliability and versatility make the VM-3000 a highly
cost-effective emergency broadcast system.
Rack Mount Equipment,
Network Audio and Others
Mixers
Amplifiers
vVoice Alarm System Amplifier
vVM Extension Amplifier
VM-3240VA AM
VM-3240E AM
• Multifunction amplifier that comes with audio inputs including
a background music input, and a speaker output section which
has an internal attenuator and a 6-output selector
• Permits not only general-purpose broadcast, but also Emergency broadcast which gives pre-recorded instructions in an
emergency situation
• Features a surveillance function which automatically checks the
system for failures
• Emergency broadcasts can be made from am optional RM-300MF
Fireman’s Microphone as well as from the amplifier, and can be
remotely controlled from external equipment
• Adds additional zones to the VA system
VM-3000 Series Integrated Voice Evacuation System Example
Speakers
VM-3240VA (240W)
Conference
Systesm
Megaphones
VM-3240E (240W)
Intercom
VM-3240E (240W)
Security
& Safety
Reference
81
TOA Electronics, Inc.
RM-300MF/
RM-320F
VX-2000DS
I/F
Fire
Alarm
for BGM
• Equipped with an emergency activation key, permitting
pre-recorded evacuation and alert announcements to
be activated, and microphone announcements to be
made in emergency situations
Microphones
Wireless
Systems
Rack Mount Equipment,
Network Audio and Others
vRemote Microphone Extension Unit
RM-210
vFireman’s Microphone Extension
VP-2241
RM-320F
VP-2241
• By connecting the RM-320F Fireman’s Microphone
Extension to the RM-300MF, the number of function keys
can be expanded
• Zone selection or failure acknowledgement function can be
assigned to such function keys
VM-3240E
Mixers
RM-300MF
• Up to four can be connected to a remote microphone
for up to 50 zone selection buttons
• Emergency activation button is equipped with a cover
CDplayer
VM-3240VA
vFireman’s Microphone
Amplifiers
RM-200M/
RM-210
Lead-3cid
Battery
Speakers
Lead-3cid
Battery
• Up to four remote microphones can be
connected but the maximum connection length
for all cables is approximately 800 meters
• Emergency activation button is equipped with a
cover in case of accidental selection
• An external microphone input terminal is provided to allow using a
headset microphone, along with built-in internal compressor circuitry
• TALK button may be a PTT or lock-type
• UL2572 Listed
vMeanwell Power Supply
RCP-100024
vMeanwell Power Supply Frame
Intercom
F-2322C
F-2322C
• 24V- 40A Hot-swappable power supply (Requires
RCP-1UIU Frame)
RCP-1UIU
• 1U Power Supply Frame for 3 RCP-100024
vRail Power Supply
SDR-480-24
Conference
Systesm
Surveillance
Amplifier and speaker line failures are detected with built-in
surveillance function.
RM-200M S AM
Megaphones
Voice Alarm
Emergency pre-recorded message activated by fire alarm and
announcement from the Fireman’s microphone (RM-300MF) are
transmitted to specified areas. Normal broadcasting programs
are automatically muted. In case of power failure, emergency
broadcasting works with battery backup.
vRemote Microphone
NO
IMAGE
• 24V- 20A Fanless- DIN Rail Power Supply
Security
& Safety
Paging and BGM
Announcements from Remote microphone (RM-200M) with
pre-announcement chime and selection of broadcasting area.
BGM(CD player) is automatically muted during announcement.
VM-3000 Series Integrated Voice
Evacuation System Optional
Accessories
vEmergency Power Supply Unit
VX-2000DS AM
• Supplies DC power to equipment
• Supports 2 x 12 V sealed lead batteries fully charged
• DC distribution for up to 6 units
TOA Electronics, Inc. 82
Reference
VM-3000 Series Integrated Voice
Evacuation System Office Building
Application
Microphones
Reference
Wireless
Systems
Optional Accessories - Mixers/Amplifiers
Rack Mount Equipment,
Network Audio and Others
Mixers
Amplifiers
Product Series
Model
A-700 Series
A-706, A-712, A-724
Series Picture
Optional Accessories
MB-25B
A-900 Series
A-903MK2, A-906MK2, A-912MK2, M-900MK2
MB-25B
YA-920(included)
P-900 Series
P-906MK2, P-912MK2
MB-25B
YA-920(included)
P-924MK2
MB-35B
YA-920(included)
In-Wall Amplifier
W-906A, W-912A
BX-9F
BG-2000
BG-2035, BG-2060, BG-2120
MB-1000
BA-200 / BG-200 Series
BG-220, BG-235
MB-25B-BK
Speakers
BA-235, BA-260
Conference
Systesm
DA Series
DA-250DH, DA-250FH, DA-500F-HL
Micro Amplifier
AV-20D, AV-60S
All Models
PF-511
Perforated Vent Panel
IT-450
BX-9S
YA-920(included)
WE-2
YA-920(included)
MB-25B-J
YA-920(included)
YA-920(included)
MT-251H
MB-AV20RM
MB-AV20PM
MB-DM820
[All Models]
Megaphones
Optional Accessories - Rack Mount Equipment, Network Audio and Others
Intercom
Security
& Safety
Product Series
Model
Network Audio
NX-100, NX-100S
Program Timer
TT-104B
Digital Message Repeater
EV-20R
AM/FM Synthesized Tuner
DT-930 UL
Megaphone
ER-604W
Series Picture
Optional Accessories
AD-246
AD-246
MB-15B
ER-1203, ER-1206, ER-1206W, ER-1206S
SP-1100
Reference
TOA Electronics, Inc.
MB-15B-BK
MB-15B
WH-4000H
83
MB-15B-J
MB-WT3
MB-WT4
Microphones
Optional Accessories - Microphones and Conference Systems
Model
WT-5800
Series Picture
Optional Accessories
MB-WT3
WT-5805
MB-WT4
WD-4800
YW-4500
WTU-4800(forWT-4820)
Wireless
Systems
Product Series
UHF Wireless
Microphone Systems
HEADSET MICS
WD-4800
(for WT-4800, WT-5805, WT-4820, S5 Series)
Infrared Wireless
Microphone System
IR-200M
(WM-5325H, WM-5325A)
7000112490
100012769A
WH-4000A
WH-4000H
Q-EM-77
WH-4000P
YPM-5300
YPM-5310
WH-4000S
Mixers
WM-5325
MB-15B
IR-200BT-2
Rack Mount Equipment,
Network Audio and Others
WT-4820
IR-310BC(forIR-310M)
YP-M101
Amplifiers
IR-300M
IR-310M
IR-820SP
HY-WB802
Boundary Microphone
IR-700D
YW-1022Y(forIR-700D)
IR-702T (MB-WT3, MB-WT4 only)
MB-WT3
YW-1024Y(forIR-700D)
MB-WT4
EM-800
Conference
Systesm
IR-802T
Speakers
HY-BC802
TS-770
YR-770-2M
YR-770-10M
Infrared Conference
Systems
TS-800 UL / TS-910 UL
AD-0901UL
BP-900UL
TS-903
TS-901; TS-911
TS-904
Security
& Safety
TS-802; TS-812
MB-TS900
TS-918 US
TS-902; TS-912
TS-919_B1
TS-919_B4
TS-905 / TS-907
YW-1022Y
YW-1024Y
TOA Electronics, Inc. 84
Reference
TS-801; TS-811
Intercom
Conference Systems
Megaphones
ST-800
Microphones
Speaker Mounting Accessories Charts
Wide-Dispersion Box Speakers
Wireless
Systems
Model
F-1000BT/WT/BTWP/WTWP
F-1300BT/WT/BTWP/WTWP
F-2000BT/WT/BTWP/WTWP
Rack Mount Equipment,
Network Audio and Others
Cluster Bracket
HY-CL10B
Ceiling Mount Bracket
HY-CL20B
HY-CM10B
HY-CM10W
HY-CM20B
HY-CM20W
Mixers
Board Hanging Bracket
HY-BH10B
--
Amplifiers
Pole Mounting Bracket
YS-60B
Line Array Speakers Type A
Model
Indoor Use
Outdoor Use
Speakers
SR-A12L
Conference
Systesm
Rigging Frame
SR-A12S
SR-A18B
SR-RF12
SR-A12LWP
SR-A12SWP
SR-RF12WP
Tilt Joint Plate
SR-TP12
Megaphones
Line Array Speakers Type C
Model
Indoor Use
Outdoor Use
SR-C8L
SR-C8S
SR-C15B
SR-C8LWP
SR-C8SWP
Intercom
Rigging Frame
SR-RF8
SR-RF8WP
Security
& Safety
Cluster Bracket
SR-CL8
Rigging Support Bracket
SR-SB8
Reference
Tilt Joint Plate
SR-TP8
85
TOA Electronics, Inc.
SR-C15BWP
Microphones
Speaker Mounting Accessories Chart
SR-S4LWP
SR-S4S
SR-S4SWP
SR-EP4
SR-EP4WP
SR-EP4
SR-EP4WP
SR-TB4
SR-TB4WP
SR-TB4
SR-TB4WP
SR-WB4
SR-WB4WP
SR-WB4
SR-WB4WP
Rack Mount Equipment,
Network Audio and Others
SR-S4L
Wireless
Systems
Line Array Speakers Type S
Model
Mixers
Extension Plate
Wall Tilt Bracket
Flying Bracket
SR-FB4
Floor Stand
SR-FS4
Protection Pad
SR-PP4
MT-S0601
Conference
Systesm
Matching Transformer
Speakers
SR-SA4
TOA Speaker Software (SPV)
Free download at: www.toaelectronics.com! Design distributed ceiling or wall-mount speaker systems in minutes! The
newest version of the TOA Speaker System Software is available with added features and more data files for all of your
favorite TOA ceiling and wall-mount speakers. And, best of all, it’s FREE!
• Easy to Use — design and layout systems in minutes!
• Automatic or Manual Layout Modes
Reference
Security
& Safety
Intercom
• Color Display of Sound Pressure Level with adjustable resolution
• Interactive Frequency Response Display — changes in real-time as
you move the mouse through the coverage area
• Updated Speaker Database includes most TOA models plus generic
4”, 5” and 8” ceiling speakers
• Rectangular or Hexagonal Layout Patterns — Maximum Overlap,
Minimum Overlap and Edge-to-Edge
• Adjust Individual Speakers — location, power and placement angles
• Minimum, Maximum and Average SPL Display for both pink noise
and music/speech
• Selectable Frequency Centers — 1/12, 1/6, 1/3, 1, 2 and 4th octave
• Print Function includes color plots and speaker locations
with Print Preview
• Recommended amplifier power calculation
• Energy or interference modes
• Normal or reverse polarity for individual speakers
• Metric or imperial units
• Zoom in/out and fit modes
• Distance between columns/rows
Megaphones
Stand Adapter
Amplifiers
Wall Mounting Bracket
TOA Electronics, Inc. 86
Microphones
Speaker Mounting Accessories Charts
Line Array Speakers Type H
Wireless
Systems
Model
SR-H2L
SR-H2S
Rack Mount Equipment,
Network Audio and Others
SR-EP3
Extension Plate
SR-H3L
SR-H3S
SR-EP3
--
--
Mixers
Amplifiers
Speakers
Wall Mount Bracket
SR-WB3
Wall Tilt Mount Bracket
SR-TB3
Flying Bracket
SR-FB3
Speaker Stand Adapter
SR-SA3
Matching Transformer
MT-S0301
Conference
Systesm
SR-D8 Active Line Array Speaker System
Model
SR-D8-M
SR-D8-S
Megaphones
Ceiling Speakers
Model
Intercom
Security
& Safety
Extension Plate
SR-D8EP
Fixing Bar
SR-D8FB
Hoisting Bracket
SR-D8HB
SR-D8CS
Wall Mount Adaptors
Reference
87
TOA Electronics, Inc.
Back Can
Tile Bridge
SR-D8CL
SR-D8WB
Tile Rails
PC-580RU / PC-580RVU
Microphones
Speaker Mounting Accessories Charts
Subwoofers
HX-7W-WP
FB-150B
FB-150B
HY-PF7B
HY-PF7W
--
--
--
--
--
--
--
--
--
--
--
--
--
--
WP=Weather Proof
HY-PF7B
HY-PF7W
HY-CM7BSET
HY-CM7WSET
Rigging/Hanging Frame
Ceiling Mount Bracket Set
HY-WM7BSET
HY-WM7WSET
Wall Mount Bracket Set
HY-TM7W-WP
T Rigging Bracket
Angle Adjustment Bracket
HY-60DB-WP-3
HY-60DW-WP-3
HY-CN7B-WP
HY-CN7W-WP
Speaker Joining Bracket
HY-ST7
Speaker Stand Adapter
Amplifiers
HY-TM7B-WP
Wireless
Systems
HX-7W
Rack Mount Equipment,
Network Audio and Others
HX-7B-WP
Speakers
HX-7B
Mixers
Variable Dispersion Loudspeakers (HX-7 Series)
Model
Interior Design Speakers
Subwoofer
H-2 EX/H-2WP EX
H-3 EX/H-3WP EX
HB-1
--
--
--
E-05R
E-06R
E-07S
Megaphones
H-1 EX
HY-H1
Ceiling Mount Bracket
E-04R
Security
& Safety
Equalization Module
Horn Speakers
Swivel Bracket
SC-610/SC-610T; SC-615/SC-615T; SC-630/SC-630T; SC-651
Reference
Model
Intercom
Model
Conference
Systesm
HY-MT7
Matching Transformer Adapter
YS-151S
TOA Electronics, Inc. 88
Microphones
Speaker Mounting Accessories Charts
Compact Array Speakers (HX-5 Series)
Wireless
Systems
Model
Subwoofer
Rack Mount Equipment,
Network Audio and Others
HX-5B
HX-5W
HX-5B-WP
HX-5W-WP
HY-PF1B
HY-PF1W
HY-PF1WP
HY-CW1B
HY-CW1W
HY-CW1WP
FB-120B
FB-120W
HY-PF1B
HY-PF1W
--
--
--
--
--
--
Rigging Frame
Mixers
Ceiling Mount Bracket
HY-WM1B
HY-WM2B
HY-WM1W
HY-WM2W
HY-WM1WP
HY-WM2WP
Mounting Bracket
Amplifiers
HY-CN1B
HY-CN1W
HY-CN1B-WP
HY-CN1W-WP
Extension Bracket
Speakers
Speaker Stand Adapter
HY-ST1
--
--
Matching Transformer
MT-200
--
--
Coaxial Array Speakers
Conference
Systesm
Models
HS-1200BT
HS-1200WT
HS-1500BT
HS-1500WT
Megaphones
HY-1200VB
HY-1200VW
HY-1500VB
HY-1500VW
HY-1200HB
HY-1200HW
HY-1500HB
HY-1500HW
Wall/Ceiling Mount Bracket
Vertical Installation
Intercom
Wall/Ceiling Mount Bracket
Horizontal Installation
HY-C0801
HY-C0801W
HY-W0801
HY-W0801W
Security
& Safety
Ceiling Mount Bracket
Wall Mount Bracket
Reference
89
TOA Electronics, Inc.
Microphones
Speaker Mounting Accessories Chart
F-1522SC
F-2322C/F-2322CU2
F-2352C/F-2352CU2
HY-TB1
F-2352SC
F-2852C/F-2852CU2
Rack Mount Equipment,
Network Audio and Others
F-122C/F-122CU2
HY-TB1
Note: F-2352SC:
When using the HY-TB1 the
HY-RR2 is required.
|Supplied with CU2 versions.
Tile Support Rails
HY-RR2
HY-RR1
Wireless
Systems
F Series Ceiling Speakers
Model
HY-RR2
HY-TR1
Mixers
Ceiling Reinforcement
Ring
HY-TR1
Note: F-2352SC:
When using the HY-TR1 the
HY-RR2 is required.
|Supplied with CU2 versions.
Trim Ring
Amplifiers
HY-BC1
Back Can
HY-AH1
HY-AH1
Note: F-2352SC:
When using the HY-AH1 the
HY-RR2 is required.
|Supplied with CU2 versions.
Surface Mount Bracket
Tile Bridge
TB-200
Tile Bridge
Tile Bridge
TB-200
TB-250
Speakers
HY-BC1
EASE Focus - Generic Aiming & Acoustic Modeling Software
EASE Focus is a software that allows the modeling of acoustic sources, in particular line arrays, in two dimensions. It
considers the direct field created by the complex addition of the sound contributions of the individual loudspeakers or
array elements. Based on an intuitive and consistent interface, the design of EASE Focus is targeted at the end user,
but also at the R&D engineer.
Reference
Security
& Safety
• Aiming and color mapping display
• Zoomed rigging display
• Extended report for printing
• Levels over audience areas
• COM and tilt angle calculation for multiple selected pinpoint
• Presets for audience areas and array setup
• Acoustic calculation
• SPL in 1/3rd octave, octave, 3 octaves, broadband
• RMS, program and peak levels
• Flat and A-weighted levels
• Air attenuation according to ISO 9613
• Complex modeling of cabinets with multiple sources per cabinet
• Amplitude shading
• Optimized SPL calculation routines for interactive aiming
Intercom
E-03R
Equalization Module
Megaphones
Conference
Systesm
C2 Version Tile Bridge
TOA Electronics, Inc. 90
Microphones
Amplifier Selection Chart
Wireless
Systems
Inputs
Model
Number
Power
Mic
Aux
Tel
Rack Mount Equipment,
Network Audio and Others
Mixers
W-906A
60W
120W
AV-20D
20W x 2
AV-60S
60W x 1
BA-235
35W
BA-260
60W
Amplifiers
BG-220
20W
BG-235
35W
BG-2035
35W
BG-2060
60W
BG-2120
120W
Speakers
A-9060DHM2
60W x 2
A-9120DHM2
120W x 2
A-9060SM2
60W
A-9120SM2
120W
A-9240SHM2
60W x 2
P-9120DH
120W x 2
Conference
Systesm
CA-115
15W
CA-130
30W
CA-160
60W
Optional
No
Yes
Yes
Yes
Yes
1
1
(900 Series)
6 module slots
6
(900 Series)
Yes
Yes
Yes
Yes
3
Yes
Yes
Yes
Yes
Yes
1
Yes
Yes
Yes
Yes
1
2 (3)**
Yes
Yes
Yes
Yes
Yes
Optional
1
2 (3)**
1
1
(900 Series)
Yes
Yes
Yes
Yes
Yes
Optional
4 dual
module
slots
4 dual
module
slots
1
8
(9000 Series)
Yes
Yes
3 dual
module slots
Yes
Yes
2
2
Yes
Yes
Optional
Yes
Yes
Yes
Yes
4
DA-250FH
4
Megaphones
See DA power
output chart
below
Yes
Yes
1
DA-250F
DA-250D
Yes
Yes
Yes
4 ohm 8 ohm
240W
P-9060DH
DA-250DH
Optional
8
(900 Series)
30W
W-912A
Optional
8 module slots
A-903MK2
240W
Yes
Yes
1*
P-924MK2
Yes
Yes
2
240W
60W
Optional
Yes
120W
A-724
120w
Optional
Yes
A-712
P-912MK2
Yes
Yes
1
P-906MK2
Optional
1
(900 Series)
2
6
(Mic or
Line)
60W
Optional
Yes
2
60W
120W
Rack
Ears
Yes
240W
A-912MK2
MOH
25V
A-706
Module
Preamp
70V
A-2240
A-906MK2
Outputs
Record /
Bridge /
Line
Yes
Yes
Yes
Yes
Yes
2
Yes
DA-500F-HL
4
Yes
DA-550F
4
Yes
Yes
Yes
Yes
Yes
DA Amplifier Power Output Chart
Model
Power Output
2x 250W (4 ohms)
Intercom
Stay up-to-date with our latest
product information by
visiting our website at
www.toaelectronics.com!
DA-250D
2x 170W (8 ohms)
1x 500W bridged (8 ohms)
DA-250DH
2x 250W (70V)
1x 500W bridged (140V)
4x 250W (4 ohms)
DA-250F
4x 170W (8 ohms)
Security
& Safety
2x 500W bridged (8 ohms)
DA-250FH
4x 250W (70V)
2x 500W bridged (140V)
4x 500W (70V)
2x 1000W bridged (140V)
Reference
DA-500F-HL
4x 550W (8 ohm)
4x 100W (4 ohms)
2x 1100W (16 ohms)
4x 550W (4 ohms)
DA-550F
91
TOA Electronics, Inc.
No
Yes
2
*Transformer-Isolation for Telephone Paging Applications (Input #1); ** Selectable
Yes
4x 350W (8 ohms)
2x 1100W bridged (8 ohms)
Microphones
ML-11T
Standard with high/low cut filters, Phantom
M-01S T
Mute-Receive with high/low cut filters, Phantom
M-11S T
Mute-Send with high/low cut filters, Phantom
1/4”
Phone
Jack
M-01F
M-01M
M-01P
RCA Jack
Dual RCA
Jacks
M-51S T
M-51F
Compressor with high/low cut filters, Phantom
M-61S T
M-61F
Remote Volume Control with high/low filters, Phantom
M-21S
For high-Z mic. only with high/low cut filters
M-03P
ML-11T
Standard with high/low cut filters
B-01F
L-01S T
L-01F
U-01S T
U-01F
U-01P
Mixers
B-01S T
Standard, no special feaures or adjustments
U-01R
U-03S T
U-03R
B-11S T
L-11S T
U-11S T/R with Gain
Mute-Receive with high/low cut filters, Gain
U-11S T
U-13S
Mute Receive with variable mute depth, Gain
Amplifiers
Standard with Mute-Receive
U-11R
U-13R
U-12S T
B-41S
Mute-Send
Mute-Send with high/low cut filters
U-43S
U-43R
B-21S
U-21S
Compressor with Gain
Speakers
L-41S T
Remote Volume Control with Gain
U-61S T
T-01S T
Line input with Gain, MOH output with Gain
T-02S
Line input w/Gain & Mute-Receive, MOH output w/ Gain
T-12S
1 kHz Sine Wave test tone with Gain
S-01S T
Buzzer/Yelp signal tone with Gain
S-02S T
Switch-selectable tones (4) with Gain
S-04S T
Noise Masking Module
NM-01 AM
VoIP Phone Paging SIP supported
(power supply A-1215P required)
SP-11N AM
Equalizer for F-122C/CU2 Speakers
E-03R
Equalizer for H-1 EX Speakers
E-04R
Equalizer for H-2/H-2WP EX Speakers
E-05R
Equalizer for H-3/H-3WP EX Speakers
E-06R
Low Pass Filter for FB-120/HB-1 Subwoofers
E-07S
Remote master volume control (VCA)
V-01S
Conference
Systesm
U-14R
Line output with Gain
Megaphones
Dual input priority with AGC and Gain
Special Function Modules
5 Screw
Terminals
M-41S
Voice Gate with low cut filter, Phantom
Mic/Line Input w/Mute Send/Receive H/L Filters
Line Input Modules*
Male XLR
Wireless
Systems
Mic/Line Input w/Mute Send/Receive H/L Filters, Phantom
Female
XLR
Intercom
Microphone Input
Modules
Removable
Terminal
Block
Rack Mount Equipment,
Network Audio and Others
Module Selection Chart
*For Line Input Modules:
Use “L” modules only for 600 ohm balanced/unbalanced impedance matching. “L” modules are transformer decoupled.
Use “U” for unbalanced sources with short cables (≤ 15 feet).
Note: All “S” type modules with 3-screw terminal connectors transitioned to Removable Terminal Block (Phoenix-type) in 2004. Models include: B-01S T, B-11S T, L-01S T, L-11S T, L-41S T,
M-01S T, M-11S T, M-51S T, M-61S T, S-01S T, S-02S T, S-04S T, T-01S T, U-01S T, U-03S T, U-11S T, U-12S T, and U-61S T. Modules B-41S, M-41S, T-02S, T-12S, U-13S, and U-43S use Removable Terminal Block (Phoenix-type) connectors but are not marked with a “T”. New Removable Terminal Block (Phoenix-type) connectors, part number 1233619290, have the following
pin-out: H:Hot, C:Common, E:Earth equivalent to 3,2,1 respectively.
TOA Electronics, Inc. 92
Reference
Security
& Safety
Use “B” modules or ML-11T for balanced/unbalanced sources. “B” modules are transformer decoupled.
Distributed by
TOA Corporation
Specifications are subject to change without notice.
833-61-071-30
TOA Electronics, Inc.
1350 Bayshore Highway, Suite 270
Burlingme, CA 94010
800-733-4750
www.toaelectronics.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement