flexfit™ adjustable base assembly guide

flexfit™ adjustable base assembly guide
FLEXFIT ADJUSTABLE BASE
ASSEMBLY GUIDE
™
®
2
SLEEP NUMBER, SELECT COMFORT and the Double Arrow Design
are registered trademarks of Select Comfort Corporation.
You’re about to take your sleep experience to a whole new level.
Read, watch TV, surf the web and adjust your bed’s firmness for
ideal support — all with a single, intuitive remote. We know you’ll
fall in love with comfort you can adjust in every way.
FlexFit 1
4
FlexFit 2
6
FlexFit 3
8
FlexFit Adjustable Base: What's Included
10
FlexFit Control System
12
Installing Your Mattress
16
Preparing Your Remote(s)
18
Assembling Your Headboard Brackets
20
Replacing Snap Latches
23
™
™
™
™
™
Assembling Your Mattress
Congratulations
Warranty26
Safety Instructions
27
Advisory & Product Care
28
Frequently Asked Questions
30
Optional Accessories
32
3
FlexFit 1
™
Adjustability, comfortably priced
Head
•Raise the head of your bed to read, watch TV or sleep
in ideal comfort
•Adjust your bed’s firmness and elevation at the simple
touch of a button
FlexTop King Sleep Number c2
mattress shown with complete
upholstered bed (sold separately).
™
4
®
CAUTION: Please refer to pages 27-29 regarding Important
Safety Instructions, Advisories & Product Care.
MY SLEEP NUMBER SETTING BUTTON
Press to return to your Sleep Number setting
®
An intuitive remote allows you
to choose your ideal firmness — your SLEEP NUMBER setting — or adjust your FlexFit bed
position. Switch between
them by simply pressing the
Menu/Select button.
®
™
Assembling Your Mattress
Your Remote
at a Glance
SIDE BUTTON
Press to choose your side of the bed
MENU/SELECT BUTTON
Press the Menu/Select button to
bring up the menu. From here you
can change your Sleep Number
setting, adjust your FlexFit bed
position, rename your side of
the bed, find customer support
information and more
™
UP/DOWN ARROWS
Press to adjust your Sleep Number setting
or FlexFit bed position and scroll up or
down in any menu
™
5
FlexFit 2
™
Customize your comfort with countless adjustability
Head/Foot
Partner Snore
™
Timer
•Enjoy head-to-toe relaxation while reading, watching TV
or lounging
•Partner Snore technology* lets you gently raise your
partner’s head
™
•Let your body float into the weightlessness of zero gravity
•Adjust your bed’s firmness and elevation at the simple
touch of a button
FlexTop King Sleep Number c3
mattress shown with complete
upholstered bed (sold separately).
™
6
®
CAUTION: Please refer to pages 27-29 regarding
Important Safety Instructions, Advisories & Product Care.
*Available with Split King, Split California King
and FlexTop King beds.
™
MY SLEEP NUMBER SETTING BUTTON
Press to return to your Sleep Number setting
®
An intuitive remote allows you
to choose your ideal firmness — your SLEEP NUMBER setting — or adjust your FlexFit bed
position. Switch between
them by simply pressing
the Home button.
®
™
UP/DOWN ARROWS
Press to adjust your Sleep Number
setting or FlexFit bed position and
scroll up or down in any menu
Assembling Your Mattress
Your Remote
at a Glance
SIDE BUTTON
Press to choose your side of the bed
™
HEAD/FOOT BED POSITION
Press to select head or foot and
use the up/down arrows to adjust
FAVORITES
Press to choose popular bed
positions including Zero G,
Snore and Partner Snore *
HOME
Press to switch between your Sleep Number setting or
FlexFit bed position. You can also rename your side of
the bed, find customer support information and more
™
TIMER
Press to set a time to return your bed
to your favorite sleeping position
™
ENTER
Press to select a menu item
7
FlexFit 3
™
Endless adjustability for ultimate relaxation
Head/Foot
Partner Snore
™
Light Control
Massage
Wall-hugging
Timer
•Enjoy head-to-toe relaxation while reading, watching TV
or lounging
•Partner Snore technology* lets you gently raise your
partner’s head
™
•At the touch of a button, turn on a soft light under the bed
and control your night stand lamps
•Massage soothes tired muscles and leaves you feeling
rejuvenated
•Let your body float into the weightlessness of zero gravity
•Adjust your bed’s firmness and elevation at the simple
touch of a button
FlexTop King Sleep Number c4
mattress shown with complete
upholstered bed (sold separately).
™
8
®
CAUTION: Please refer to pages 27-29
regarding Important Safety Instructions,
Advisories & Product Care.
*Available with Split King, Split California
King and FlexTop King beds.
™
MY SLEEP NUMBER SETTING BUTTON
Press to return to your Sleep Number setting
®
An intuitive remote allows you
to choose your ideal firmness — your SLEEP NUMBER setting — or adjust your FlexFit bed
position. Switch between
them by simply pressing
the Home button.
®
™
UP/DOWN ARROWS
Press to adjust your Sleep Number
setting or FlexFit bed position and
scroll up or down in any menu
Assembling Your Mattress
Your Remote
at a Glance
SIDE BUTTON
Press to choose your side of the bed
™
HEAD/FOOT BED POSITION
Press to select head or foot and
use the up/down arrows to adjust
FAVORITES
Press to choose popular bed positions
including Read, Watch TV, Snore,
Partner Snore * and Zero G
HOME
Press to switch between your Sleep Number setting or
FlexFit bed position. You can also rename your side of
the bed, find customer support information and more
™
MASSAGE
Press to choose your type of massage
™
LIGHTS
Press to turn on or off nightlight as
well as lights that are plugged in to
your FlexFit control system
TIMER
Press to set timer(s) to return your bed to your favorite sleeping
position, turn off the lights and end your massage
™
ENTER
Press to select an option
9
Before You Begin
FlexFit Adjustable Base: What’s Included
™
Assembling Your
FlexFit Adjustable Base
Twin
ExtraLong
Full/
Queen
King
Split/
FlexTop
King
Remote
1
1
1
2
FlexFit Control System
1
1
1
1
Legs
4
4
8
8
4
4
8
8
0
0
1
1
1
1
1
1
1
2
2
2
™
Carefully check the contents of your boxes.
Make sure you have the correct number of components for the
size of bed you purchased. If you are missing any items listed to
the right, please call 1.800.472.7185 or email Customer Service at
[email protected]
™
Mattress Retainers
Bed Strap Kit
King bases only
Power Cord
Under-bed Lights
FlexFit 3 base only
™
10
™
™
™
FlexFit Adjustable Base: What's Included
FlexFit Adjustable Base Components
Remote
FlexFit
Control System
May vary by model
Mattress Retainers
Legs
™
May vary by model
Bed Strap Kit
King bases only
May vary by model
Power Cord
Under-bed Lights
FlexFit 3 base only
™
11
Your FlexFit Control System at a Glance
™
A
Power Cord Connection
B
Reset Button
B
C
D
Resets the FlexFit base control system.
™
C
Outlets (vary by model)
Constant power for your phone charger,
alarm clock, etc.
D
Left Night Stand (FlexFit 3 base only)
™
Controls left night stand lamp from remote.
E
FRONT
Right Night Stand (FlexFit 3 base only)
™
Controls right night stand lamp from remote.
F
Left FlexFit Base Connection
G
Right FlexFit Base Connection
H
Flat Base Button
™
™
F
H
G
Press to return base to flat position.
I
A
Nightlight (FlexFit 3 base only)
™
Connection for under-bed light(s).
BACK
May vary by model
12
I
E
FlexFit Control System
Connecting Your FlexFit Control System
™
J
Junction Cable(s)
K
Right FlexFit Adjustable Base
L
Left FlexFit Adjustable Base
K
™
™
M FlexFit™
N
™
L
Control System Front
M
FlexFit Control System Back
May vary by model
(King shown)
™
FRONT
N
K
J
Twin
N
May vary by model
(King shown)
N
BACK
J
L
Full/Queen
13
Preparing Your FlexFit Control System
™
1
FlexFit Control
System Placement
™
2
•Place the FlexFit control system on the floor under the
head of the bed.
™
•Plug the power cord into the FlexFit control system.
Do NOT connect to power at this time.
™
•FlexFit 3 base only: Plug night stand lamps (not included)
into corresponding Left Night Stand and Right Night Stand
outlets on the FlexFit control system. See illustration on
page 12 for outlet locations.
™
™
14
Connect Your
Adjustable Base(s)
•Plug the junction cable(s) under the adjustable base(s) into
the back of the FlexFit control system. See illustration on
page 12 for connection locations, labeled Sleep Number
Left and Sleep Number Right.
™
®
®
NOTE: King size beds have a left and right junction cable.
Extension Cable
™
•For Twin size beds, you will install one under-bed light;
for Full, Queen, and King size beds you’ll install two
under-bed lights. See the illustrations to the right for
under-bed light placement.
Light Location
•Plug the under-bed light connector(s) into the extension
cable(s) attached to the underside of the adjustable base.
Foot of bed
Full/Queen
•Peel the adhesive backing off one under-bed light and
install the light on the vertical surface inside the rail under
the adjustable base, facing toward the center of the bed
(see diagram for location). For Full, Queen and King beds,
install the second light with the light facing toward the
center of the bed (see illustrations for location).
NOTE: Ensure that each light faces toward the center of
the bed.
Extension Cable
Light Location
™
Connect Your Under-Bed Lighting
(FlexFit 3 base only)
FlexFit Control System
3
Extension Cable
Light Location
Foot of bed
Twin
King
Extension Cable
•Plug the extension cable connector(s) at the head of the
bed into the Nightlight connections on the back of the
FlexFit control system.
Extension Cable
™
NOTE: To create a glow when illuminated, lights should
face inward toward the center of the bed. Brightness can
be adjusted with the remote.
Light Location
FlexTop King
™
Light Location
Foot of bed
Bottom of base shown.
15
Installing Your Mattress
1
Prepare Your FlexFit
Adjustable Base
™
2
•Unzip the Sleep Number mattress cover and set cover top aside.
Tools required: utility knife, 7/16-inch socket and
ratchet or combination wrench.
WARNING: Exercise extreme caution when
using utility knife. The danger of serious
finger cuts is possible if utility knife is not
used correctly.
Align Mattress Cover
IMPORTANT: Wash hands before beginning
installation. Residue on hands will easily transfer to
cloth-covered bed components.
•Verify FlexFit Control System setup steps 1–3
are complete (see pages 14-15).
™
•Identify four locator pins on the top of the
FlexFit adjustable base.
•Position the bottom of the Sleep Number mattress cover on top of
the adjustable base ensuring the head of the mattress cover (side with
openings for air hoses) is matched with the head of the FlexFit adjustable
™
base. Make sure the air chambers and foam border walls are not
installed, leaving only the fabric mattress cover forming a box (diagram
A below).
•Pull the sides of the mattress cover down over the FlexFit adjustable base
(illustration B below).
™
•At each hex head bolt location, use the utility knife to make a small cut (no
larger than 1/4-inch long) through the mattress cover fabric (illustration C
below).
•Pull sides of mattress cover back up to their original position. Remove the
mattress cover.
™
NOTE: Locator pins mark the threaded
hole locations used for SLEEP NUMBER
mattress attachment.
B
®
•Remove all four locator pins and Install (4) hex
head bolts.
A
Inverted
mattress
Cut slits
C
16
Pull out each locator pin
from the threaded insert.
Invert sides
Installing Your Mattress
3
Install Mattress Retainer Kit
•Remove hex head bolts.
•Place the four bottom attachment pieces between the FlexFit
adjustable base and mattress cover bottom at each hex head
bolt location.
™
•Place the mattress cover bottom back on the base. Align the
mattress cover with the FlexFit adjustable base ensuring that the
™
Top Attachment Pieces
head of the mattress is matched with the head of the base.
•Place the four top attachment pieces over the four cuts and insert
hex head bolts.
Hex Head
Bolts
•Tighten the four hex head bolts until snug using a 7/16-inch socket.
NOTE: Do not overtighten.
•Complete mattress setup per the SLEEP NUMBER mattress
installation instructions.
®
Top Attachment Pieces
Air Hose Opening
Bottom Attachment Pieces
Head of Bed
17
Preparing Your Remote(s)
1
Setting Up Your Remote(s)
•Make sure that both the Firmness Control system and the
FlexFit control system are disconnected from power.
™
™
•Insert (2) AA batteries (included) into the remote and press
any button on the remote.
•A setup screen will appear on the remote. Follow the
on-screen instructions to complete setup.
®
™
™
•If your remote does not automatically go to the setup screen,
or
reset the remote by pressing the Home Button
Menu/Select button
, select System, select Settings,
select Reset Preferences, select Factory Reset and follow
the instructions on the remote.
•When you see a screen that asks, “Is this a replacement or
second remote?” select No.
•The next screen will tell you to unplug and re-plug your
Firmness Control system into a working outlet. Plug the
Firmness Control system into a surge protector connected
to a working grounded wall outlet.
™
™
NOTE: DO NOT plug the Firmness Control system into the
FlexFit 3 control system.
™
™
18
•Select Continue on the remote.
™
®
•The next screen will instruct you to unplug and re-plug your
FlexFit control system into a working outlet.
™
NOTE: The remote on-screen instructions will tell you
when to connect the Firmness Control system and FlexFit
control system to a working outlet. For beds without a
SLEEP NUMBER Firmness Control system, select Skip
on the setup screen.
™
•As the air chambers fill you will see a screen that says,
“DualAir technology engaging,” then, “This may take a few
minutes.” Once complete, continue with mattress assembly
as directed in the Sleep Number Bed Assembly Guide, then
select Continue on the remote.
NOTE: The FlexFit control system must be unplugged for at
least 20 seconds. This is required to allow it to fully
power down.
™
•Plug the FlexFit control system into a grounded outlet and
select Continue.
™
NOTE: The Reset button on the FlexFit control system will
light up when powered. If it does not light up, press the Reset
button and check power cord connections.
™
•You will see a screen on your remote that says, “Remote
attempting to sync to foundation,” and then, “Select your
type of foundation.” For all non-split beds (Twin, Full, Queen,
Eastern/California King) select Eastern/Cal King. Follow the
instructions on the screen as the adjustable base engages.
•For FlexFit 3 base ONLY, set initial nightlight (under-bed
lighting) brightness to Low.
™
•If you have not already entered your name into your remote,
do so at this time.
•Your remote setup is complete.
Adding Replacement Remotes
•Unplug the Firmness Control system and FlexFit control
system from the grounded outlet.
™
™
•Repeat step 1 with the new remote.
•When you see a screen that asks, "Is this a replacement or
second remote?" Select Yes.
Preparing Your Remote(s)
2
19
Assembling Your Headboard Brackets (optional)
1
Install Headboard Brackets
NOTE: Headboard brackets are only needed for
non-freestanding headboards.
•Use remote to raise the head section of the bed to
access the FlexFit adjustable base frame.
™
•Locate the headboard bracket assembly. On one side of
the FlexFit adjustable base frame, locate two holes for
channel headboard bracket mounting.
2
Position Channel Connector
•For Full size beds, use inner mounting holes. For Queen,
King or California King beds, use outer mounting holes.
•Position channel connector so the flat side is flush against
adjustable base frame. Attach channel connector to
adjustable base frame using two 1½-inch hex head bolts/nuts.
™
(2) 1½” Long
Hex Head Bolts
and Nuts
Full size bed mounting holes
Queen, King & Cal King bed mounting holes
(2) Headboard Bracket Assembly
mounting holes
Queen, King & Cal King bed
mounting holes
20
Full size bed
mounting holes
Attach Headboard
Bracket Channel
4
Attach Headboard
Bracket Flange
•Using two 3-inch carriage bolts/nuts, attach one headboard
bracket channel to the first channel connector.
•Attach one headboard bracket flange to one of the bracket
channels with two 1-inch hex head bolts/nuts.
•Hand-tighten bolts/nuts (loosely) to allow adjustment of the
headboard bracket channels.
•Repeat on the other side to attach the second headboard
bracket flange.
Bracket
Channel
•Slide headboard bracket assemblies (in or out) to achieve a
distance of 1½ inches to 2 inches between the edge
of the adjustable base and the headboard bracket
flange assemblies.
1.5” to 2”
Assembling Your Headboard Brackets
3
Headboard
Bracket Flange
(2) 1” Long
Hex Head Bolts
and Nuts
Channel
Connector
Full size bed
mounting holes
21
5
Adjust and Secure Brackets
•Firmly tighten the 3-inch carriage bolts on both
headboard bracket channels.
•Measure the distance (center-to-center) between the
mounting holes in the headboard.
•Measure the center-to-center distance between the
mounting slots of the headboard bracket flanges.
•If bracket flange adjustment is required to accept the
headboard, remove the 1-inch hex head bolts
and move flanges side-to-side to adjust. Reinstall bolts.
Firmly tighten all headboard mounting bolts.
6
Install Headboard
•Securely install your headboard.
IMPORTANT SAFETY NOTICE:
The bottom of the headboard cross member must be
positioned so that there are no more than 3 inches
between the headboard and the top of the mattress.
W
ARNING: Do not exceed 3 inches in order to avoid
a person or pet being caught in the space (referenced
below) while the bed is in motion. Failure to follow this
instruction could result in serious personal injury or death.
Measure flange slots center-to-center
to check headboard hole location
3”
Remove 1-inch hex head bolts and relocate flanges to achieve
center-to-center distance required for headboard mounting holes
22
MA
X.
Headboard cross member location must not exceed 3 inches from
the top of the mattress.
1
Raise Foot of the Bed
(FlexFit 2 & FlexFit 3 models only)
™
™
•Using your remote, fully raise the foot of your bed to allow
ample working space.
WARNING: Danger of entrapment. To prevent
2
Remove Silhouette Footboard
•Remove the Silhouette footboard by pulling out from the
top of the footboard down toward the floor.
•Completely detach the footboard from the sideboards.
Replacing Snap Latches
Replacing Snap Latches on Beds with Base Silhouette
serious or fatal injuries from entrapment, do not allow a
person (adult or child) or pet to play under the bed or base
or with any remote controls. Failure to follow this instruction
could result in serious personal injury or death.
23
3
Remove Snap Latch(es)
•Using a 7/16-inch wrench, remove the two bolts to
remove the snap latch on the sideboard of the Silhouette
and discard. Repeat for other side as needed.
4
King Bases Only
•After removing the snap latches from the sideboards,
remove the center snap latch, if necessary
Snap Latch Bolts
Snap Latch Bolts
Snap Latch
Snap Latch
24
Attach New Snap Latch(es)
6
•After removing the snap latch(es) from the sideboards,
place the new snap latch(es) in the same areas and loosely
replace the bolts, allowing movement for alignment.
Reconnect Footboard and
Align to Silhouette
•Reconnect the Silhouette footboard and align the
footboard to the Silhouette sideboards, to eliminate
any gaps.
•For King size beds, replace the center snap latch,
if necessary. Loosely replace the bolts, allowing
movement for alignment.
7
Replacing Snap Latches
5
Tighten Bolts
•Once aligned, with Silhouette footboard attached, use the
7/16-inch wrench to tighten all bolts on snap latches firmly.
Snap Latch
Snap Latch Bolts
25
FlexFit Warranty
™
2-5-25 Warranty
Additional Terms and Conditions
Leggett & Platt, Incorporated (“L&P”) warrants this adjustable base to the consumer
who is the original purchaser (the “purchaser”), subject to the terms and conditions set
forth herein. This warranty begins on the “warranty commencement date” which is the
date of purchase for new, unused bases and the date of manufacture for bases that have
been used as floor or display models. Thus, on a floor model base, the warranty is a
portion of the limited 25 year warranty.
This warranty does not apply (a) to any damage caused by the purchaser; (b) if there has been any
repair or replacement of adjustable base parts by an unauthorized person; (c) if the adjustable
base has been mishandled (whether in transit or by other means), subjected to physical or
electrical abuse or misuse, or otherwise operated in any manner inconsistent with the operation
and maintenance procedures outlined in this document and this warranty; (d) to damage to
mattresses, fabric, cables, electrical cords or items supplied by dealers. Contact the dealer for
warranty information on these items (e) if there has been any modification of the adjustable base
without prior written consent by L&P; (f) to costs for unnecessary service calls, including costs
for in-home service calls solely for the purpose of educating the consumer about the adjustable
base or finding an unsatisfactory power connection; (g) if the recommended weight restriction is
not followed (refer to Advisory section on page 28), the warranty will be void.
Full 2 Year Warranty
This adjustable base is warranted against defects in workmanship or materials for a
period of 2 years from the warranty commencement date. Upon notice during the first
2 years after the warranty commencement date, L&P will repair or replace (at no cost to
the purchaser) any defective adjustable base part, and L&P will pay all authorized labor
and shipping costs associated with the repair or replacement of any parts found to
be defective.
5 Year Limited Warranty
During the third through the fifth year from the warranty commencement date, upon
receipt of notice, L&P will replace any adjustable base part found to be defective. This
limited 5 year warranty shall not apply unless the defective part is returned to L&P within
10 days of purchaser’s receipt of the replacement part. Purchaser shall pay all service and
shipping costs related to the replacement of the defective part.
25 Year Limited Warranty
Upon notice during the sixth year through the twenty-fifth year from the warranty
commencement date, L&P will replace, upon terms and conditions set forth in this
paragraph, any mechanical base part found to be defective. Electronics, electrical
components, drive motors and massage motors are excluded. This limited 25 year
warranty shall not apply unless the defective part is returned to L&P within 10 days of
purchaser’s receipt of the replacement part. In years 6-25, purchaser shall pay all service
and shipping costs related to the replacement of the defective part.
Repairs to or replacement of an adjustable base or its components under the terms of this limited
warranty will apply to the original warranty period and will not serve to extend such period.
The decision to repair or to replace defective parts under this warranty shall be made, or cause to
be made, by L&P at its option and in its sole discretion.
Repair or replacement shall be the sole remedy of the purchaser. There shall be no liability on
the part of L&P for any special, indirect, incidental, or consequential damages or for any other
damage, claim or loss not expressly covered by the terms of this warranty.
This limited warranty does not include reimbursement for inconvenience, removal, installation,
setup time, loss of use, shipping or any other costs or expenses. Leggett & Platt or its service
technicians shall not be responsible for moving furniture or any other items not attached to the
adjustable base in order to perform service on the adjustable base.
It is the sole responsibility of the purchaser to provide adequate space and accessibility to
the adjustable base. In the event that the technician is unable to perform service due to lack
of accessibility, the service call will be billed to the purchaser and the service will have to
be rescheduled.
L&P makes no other warranty whatever, express or implied, and all implied warranties of
merchantability and fitness for a particular purpose are disclaimed by L&P and excluded from this
agreement. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to every purchaser.
This warranty gives the purchaser specific legal rights, and the purchaser may also have other
rights, which may vary from state to state. This warranty is valid in all 50 states, Puerto Rico, and
Canada. For warranty or other questions please contact Select Comfort Customer Service first.
CONTACT INFORMATION: Select Comfort, Customer Service Department, 9800 59th Ave N,
Minneapolis, MN 55442, 1-800-472-7185
26
GROUNDING INSTRUCTIONS
NOTE: SAVE THESE INSTRUCTIONS.
The FlexFit control system portion of FlexFit adjustable base is the only
Intertek ETL evaluated device described in this manual.
™
™
When using an electrical furnishing, basic precautions should always be followed. Read all
instructions before using this furnishing.
DANGER – To reduce the risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning.
WARNING: To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug from outlet before putting on or taking off parts.
2.Close supervision is necessary when this furnishing is used by or near children,
invalids or disabled persons.
3.Use this furnishing only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer.
4.Never operate this furnishing if it has a damaged cord or plug, if it is not working
properly, if it has been dropped, damaged or dropped into water. Return the furnishing
to a service center for examination and repair.
5. Keep the cord away from heated surfaces.
6.Never operate the furnishing with the air openings blocked. Keep the air openings
free of lint, hair and the like.
7. Never drop or insert any object into any opening.
WARNING: Electrical ground is required on this furnishing. Do not connect
to an ungrounded outlet. Do not use an extension cord or two prong adapter that
eliminates the connection to ground.
CAUTION
: This furnishing is designed for indoor use only. Install the power
strip away from heat-emitting appliances such as radiators or heat registers.
This product must be grounded. If it should malfunction or break down, grounding provides
a path of least resistance for electric current to reduce the risk of electric shock. This product
is equipped with a cord having an equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in
Warranty & Safety Instructions
Important Safety Instructions
a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product –
if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the
plug illustrated in Figure 1 below. Make sure that the product is connected to an outlet having
the same configuration as the plug. No adapter should be used with this product.
Figure 1
GROUNDED
OUTLET
8. Do not use outdoors.
9.Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
GROUNDED
OUTLET BOX
10.To disconnect, turn all controls to the off position, then remove plug from outlet.
11.This furnishing contains receptacles that are always powered on. To Reduce the Risk
of Electric Shock – Disconnect power strip from power source before servicing any
equipment connected to the power strip.
GROUNDING
PIN
12.This furnishing is intended for household use only.
WARNING: Risk of Electric Shock – Connect this furnishing to a properly
grounded outlet only. See the following GROUNDING INSTRUCTIONS.
27
Advisory
Important Information
Small Children/Pets Warning
Read the following information carefully before using this product. This adjustable base
has been quality-engineered with design features to optimize your comfort and safety
when operated properly.
: Immediately dispose of packaging material as it can suffocate
small children and pets. To avoid injury, children or pets should not be allowed to play
under or on the bed. Children should not operate this bed without adult supervision.
Keep bed in sight during operation to ensure safety and avoid injury.
Product Ratings
The bed lift motors are not designed for continuous use. Reliable operation and full
life expectancy will be realized as long as the lift motors do not operate any more than
2 minutes within a 20 minute period, or approximately 10% duty cycle. Note: Massage
equipped beds are not designed for continuous, extended massage operation.
Massage systems are rated for a maximum of 2 hours of use within any 6 hour period.
Any attempt to circumvent or exceed product ratings will shorten the life expectancy
of the product and may void the warranty. The recommended weight restrictions for
FlexFit adjustable bases are as follows: DC equipped - 600 lb all sizes. The bed will
structurally support the recommended weights distributed evenly across the head and
foot sections. This product is not designed to support or lift this amount in the head
or foot sections alone. Note: Exceeding the recommended weight restrictions could
damage the adjustable bed and void the warranty. For best performance, consumers
should enter and exit the adjustable bed with the base in the flat (horizontal) position.
™
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
Any attempt to make changes or modifications to the remote (e.g., an intentional
radiator) could void the user's authority to operate the remote according to FCC
certification (section 15.231).
Hospital Use Disclaimer
CAUTION
CAUTION: DO NOT SIT ON THE HEAD OR FOOT SECTIONS WHILE IN THE
: This base is designed for in-home use only. It is not approved for
hospital use and does not comply with hospital standards. Do not use this base with
tent-type oxygen therapy equipment or near explosive gases.
Operating Information
Pacemaker Warning
• After bed assembly is complete, operate remote to ensure proper bed functions.
: If the massage feature is in use, this product produces a vibrating
sensation. It is possible that individuals with heart assist pacemakers may experience a
sensation similar to exercise. Consult physician for complete information.
RAISED POSITION.
• Keep moving parts free of obstruction (including sheets, clothing, tubing, wiring
and products using electric power cords) during bed operation.
• Distribute body weight evenly over bed surface. Do not place entire weight on raised
head or foot sections of the bed, including during repositioning and entering or
exiting bed.
Location Environment
The level of sound experienced during FlexFit bed operation is directly related to the
location environment. For example, when a bed is located on a hardwood floor with
the massage feature in operation, a vibrating tone will be audible. To minimize this
resonance, place a piece of carpet—or optional rubber caster cups—under each leg or
caster. See the Optional Accessories section on page 32 of this manual for rubber caster
cup order information. It is possible to experience vibration or noise from the headboard
brackets, headboards or footboards if mounting bolts are not firmly tightened.
™
28
CAUTION
CAUTION
Service Requirements
NOTE: Service technicians are not responsible for moving furniture, removing
headboards and footboards or any items required to perform maintenance on the
adjustable bed. In the event the technician is unable to perform service due to lack of
accessibility, the service call will be billed to the purchaser and the service will have to
be rescheduled.
Massage Operation
The massage feature will emit a minimal tone during operation; this is normal. When the
massage level is increased, motor resonance will intensify accordingly.
Raising/Lowering Mechanisms
Cleaning Your Remote and FlexFit Control System
The raise/lower feature will emit a minimal humming sound during operation; this is
normal. During operation, the lift arm wheels make contact with the platform support
of the bed. This applies slight tension on the moving components and resonance is
reduced to a minimum level. If excessive noise or vibration is experienced, reverse the
movement action (up or down) of the base with the remote. This should realign the
base’s activating mechanisms to the proper operational position.
• Wipe the body with a clean cloth dampened with a mild
soap and water solution.
™
• For the remote, wipe the display screen with a clean, dry, lint-free cloth.
CAUTION: Do not immerse in water or place in dishwasher.
When Not in Use
Locking Caster Safety Feature
• Store remote, FlexFit control system and power cord in a controlled,
indoor environment.
™
This product can be equipped with locking casters. For best results, place rubber caster
cups under locking casters when the bed is located on smooth or hard surface flooring.
It is still possible for locking caster equipped beds to slide even when locked and even
with the use of rubber caster cups. To activate locking casters, push down on the
lock tab. To disengage the locking mechanism, push up on the lock tab (see
illustration below).
Advisory & Product Care
Product Care
Press to lock
Lubrication
This product is maintenance free. The lift motors are permanently
lubricated and sealed—no additional lubrication is required. Do not apply lubricant to
lift motor lead screws or any nylon nuts or the bed may inadvertently creep downward
from the elevated position.
Snore Button/Partner Snore Technology
™
CAUTION: The Snore and Partner Snore features are designed to
™
facilitate the temporary adjustment to the flow of air through the nose and mouth.
Ensure the comfort and safety of your sleeping partner prior to operating the Partner
Snore feature. Discontinue use of the Partner Snore feature if pain, discomfort or
unsafe condition results. Obstructed air flow is a common cause of mild snoring. While
snoring is common in adults, it can be an indication of a more serious health condition.
This is not a medical device or a substitute for medical advice, treatment or proper
monitoring of any symptom or condition. Please consult your health care provider.
™
™
29
FlexFit Remote FAQ’s
™
Q. How do I capitalize a letter in the middle of my name?
Q. How do I save my customized bed positions? (FlexFit 2
A. Select the letter and press the Up/Down buttons
simultaneously.
button
the Home button
Q. M
y remote says there’s an inflation/connectivity error. What should
, select System, select Settings, select Reset
Preferences, select Bed Positions and follow the instructions on
the remote.
I do?
A. An error message lets you know an issue has been detected,
along with prompts for how to fix it. If the error is still not resolved,
you will be instructed to visit sleepnumber.com/chat or to call us
at 1-800-511-0054.
Q. How do I reset my timer? (FlexFit 2 and 3 Bases Only)
™
A. P
ress the Timer button
and choose from the menu to adjust
the timers that are set. Scroll to select a new time option or
select Timer Off.
Q. How do I restore the remote’s original settings?
or Menu/Select button
, select System, select Settings,
select Reset Preferences, select Factory Reset and follow the
instructions on the remote.
A. P
ress the Home button
, then select System, select Settings,
select Reset Preferences, select Nightlight, then press the Up or
Down button
to adjust to your brightness preference.
Q. How do I turn my night stand lights on or off with the remote?
Q. Why won’t my remote turn on?
(FlexFit 3 Base Only)
™
A. You may need to replace or check the orientation of the batteries.
Your remote comes with two AA batteries that should last about
six months with normal use. If new batteries don’t resolve the issue,
please visit sleepnumber.com/chat or call us at 1-800-511-0054.
®
to choose your side of the bed. Press the
to choose your Sleep Number setting,
then press the My Sleep Number Setting button
®
A. Press the Lights button
off and press Enter
, then select the lights you want on or
. A light bulb icon will appear when the light
selected is on and will disappear when the light is turned off.
Q. How do I change the name on my remote?
Q. How do I save my Sleep Number setting?
remote for two seconds to save.
Q. How do I dim my under-bed nightlight? (FlexFit 3 Base Only)
™
A. To erase all stored information, press the Home button
30
for 2 seconds to save the bed position. If you wish to
reset the bed position back to the original position setting, press
A. Up to 11.
Up/Down buttons
and 3 Bases Only)
A. Adjust the bed position to your preference and hold the Favorites
Q. How many characters can I use for my name?
A. P
ress the Side button
™
on top of your
A. P
ress the Home button
or Menu/Select button
, then select
System, select Settings, select Reset Preferences, select Rename
Side and follow the directions on the remote to enter a new name.
Q. What if the head or foot section of my bed will lift, but will not
(FlexFit 2 and 3 Bases Only)
return to flat?
™
A. The Snore and Partner Snore features are designed to facilitate the
™
A. Check for obstructions (pillows, blankets, etc.) that prevent the deck
temporary adjustment to the flow of air through the nose and mouth.
from lowering. Also verify that the head of the bed is at least 2 inches
Obstructed air flow is a common cause of mild snoring. While snoring
away from the wall or headboard to provide the required clearance to
is common in adults, it can be an indication of a more serious health
raise the head. If the issue persists, visit sleepnumber.com/chat or call
condition. This is not a medical device or a substitute for medical
us at 1-800-511-0054.
advice, treatment or proper monitoring of any symptom or condition.
Please consult your health care provider.
Frequently Asked Questions
Q. What if using the Snore feature does not alleviate my snoring?
Q. What do I do if I press the button to turn on my night stand lamps,
but nothing happens? (FlexFit 3 Base Only)
™
A. M
any lamps also have an on/off switch. Ensure the lamp switch
is turned on. Ensure the lamp is connected to the FlexFit control
™
system. Also check to see if the light bulb needs to be replaced. If
the issue persists, visit sleepnumber.com/chat or call us at
1-800-511-0054.
Q. My remote says there’s a bed position connectivity error.
What should I do?
A. V
erify that the power cord is securely plugged into the FlexFit
™
control system and into a working outlet. Verify that the FlexFit
™
control system reset button is switched to Reset. If the error persists,
visit sleepnumber.com/chat or call us at 1-800-511-0054.
Q. I lost my remote. What should I do?
A. C
ontact Customer Service to purchase a replacement remote. You
can manually return your base to flat using the Flat Base button
located on the back of the FlexFit control system (see page 12).
™
31
The FlexFit series is designed to fit standard bedroom furniture.
If your furniture does not accommodate your FlexFit model please
contact Customer Service at 1-800-472-7185 for potential solutions.
Call 1-800-580-7216 for accessory pricing and to order the accessories listed.
™
Optional Accessories
™
4"
Caster Cups
Glides
(4)
Recommended for use of the
FlexFit series on hardwood floors
or other hard surfaces. Install under
caster wheels to prevent the bed
from moving. Four cups per set.
™
CODE 116449
Snap-in Casters
(4)
Our lowest bed-height option.
Thread directly into the FlexFit
base. Four glides per set. See
diagram on opposite page for
bed height dimensions. Note:
headboard brackets cannot be
used with glides. CODE 107397
™
Threaded Casters
(4)
Snap directly into 4", 6.5", 7"
and 9" legs for added height
and base mobility.
™
Swing Away Hinge Kit
(1)
For easy under-bed cleaning and bedmaking access. Split King beds easily split
apart with the swing away hinges that attach
between the headboard and each side of
the split king bed. Two hinges included.
CODE 107396
32
For use with non-SLEEP NUMBER beds.
Sleep Number beds use our patented
mattress-retaining kit to attach the mattress
to the adjustable base. The mattress retainer
bar is required when other mattresses are
used with the adjustable base to prevent the
mattress from sliding when raising the head
of the bed. CODE 117450
®
Headboard
Bracket Kit (1)
Attach an existing headboard
to your FlexFit base. Note:
headboard brackets cannot be
used with glides. Find your size
and code in the chart at right.
™
11"
(4)
For increased bed height and
under-bed storage. Select from four
leg height options. Four legs per
set. See diagram on opposite page
for bed height dimensions.
4" Legs
7" Legs
9" Legs
11" Legs
CODE 119560
Mattress Retainer
Bar Kit (1)
9"
Legs
(4)
Our second-lowest bed-height
option. Threaded casters thread
directly into the FlexFit base.
Four threaded casters per set.
See diagram on opposite page
for bed height dimensions. NOTE:
headboard brackets cannot be
used with threaded casters.
CODE 120743
7"
FLEXFIT MODEL
CODE 120744
CODE 107399
CODE 116447
CODE 116448
BED SIZE
™
CODE
FlexFit 1,
FlexFit 2 and FlexFit
3 FlexTop Headboard
Bracket Kit
Full
Queen
Twin/E. King
Cal. King
118102
118103
118101
118104
FlexFit 3
Headboard Bracket Kit
(Non-FlexTop )
Full
Queen
Twin/E. King
Cal. King
118106
118107
118105
118108
™
™
™
™
™
™
Bed Type
Frame Width
A
Twin Extra-Long
B
Base Width
28"
C
Base Length
FlexFit™ 1
Model Weight
FlexFit™ 2
Model Weight
FlexFit™ 3
Model Weight
79.5"
110 lbs.
116 lbs.
138 lbs.
37"
Full
38"
52.5"
73.5"
142 lbs.
147 lbs.
162 lbs.
Queen
38"
58.5"
79.5"
145 lbs.
150 lbs.
173 lbs.
Cal.King (per side)
28"
35.5"
83.5"
113 lbs.
118 lbs.
138 lbs.
E. King (per side)
28"
37"
79.5"
110 lbs.
116 lbs.
138 lbs.
40"
B
C
58°
Optional Accessories
Size Chart
2"
44°
22"
A
61"
Glide Only
56"
Threaded Caster Only
4" Leg
6.5" Leg
7" Leg
9" Leg
I
I
I
F
H
F
I
H
E
E
H
E
E
I
E
G
G
D
D
D
1.5 - 1.9
8.9 - 9.5
10.9 - 11.5
0
2.5
10.1
12.1
0.5
4.1
11.8
13.8
2.5
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
6.6
14.3
16.3
5
D
F
H
E
E
G
F
F
F
H
F
11" Leg
G
D
D
G
D
Leg Only
D Height to Frame
E Height to Base
F Height to Mattress
Under-Bed Clearance
6.6
14.3
16.3
5
7.1
14.8
16.8
6
9.1
16.8
18.8
8
11.1
18.8
20.8
10
9.6
17.3
19.3
8
11.6
19.3
21.3
10
N/A
N/A
N/A
N/A
Leg With Snap-in Caster
G Height to Frame
H Height to Base
I Height to Mattress
Under-Bed Clearance
9.1
16.8
18.8
8
33
Help is just a click or phone call away.
If you need help finding your ideal comfort, moving your bed or troubleshooting, please visit us at
sleepnumber.com/chat to chat with a live representative 7 a.m. – 11 p.m. (Central Standard Time)
daily or call 1.800.472.7185.
Representatives are available by phone
(Central Standard Time):
Monday-Friday 8 a.m. – 8 p.m.
Saturday
8:30 a.m. – 5 p.m.
SundayClosed
9800 59 Avenue North, Minneapolis, MN 55442
th
©2014 Select Comfort 6/14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement