Technics-SA-GX303-Owners-Manual

Add to my manuals
52 Pages

advertisement

Technics-SA-GX303-Owners-Manual | Manualzz
Technics
AV CONTROL
STEREO RECEIVER
SA-GX303
Operating Instructions
Before connecting, operating or adjusting this product,
PC please read these instructions completely.
|P | PC|
Thank you for purchasing the AY CONTROL STEREO
RECEIVER SA-GX303.
For optimum performance and safety, please read
these instructions carefully.
Table of Contents
Precautions .................... aaa 3
Safety ei. aa a a a nee a aa aa ae 3
Installation ................ A AAA aa de 4
Environment .........101001 00000 LL La ea LL 4
Расетеётп? .......,........ 2..5 LL LL Le aa aan 4
Maintenance. LL, 4
Service LL... LL La ea A de aa ae aa aa a La aa ae 4
Preparations ............... a anse a ne 5
Supplied accessories ................ oo... 5
Rear panel terminals and functions. . .. .............. ... 6
Antenna connections ... ........ as 8
FM antenna connections ............ e... 000000000. 8
AM antenna connections . .............. ree. 9
Speaker connections... ...... LL... 10
Connection of speaker cCablesS. 10
Front Panel Controls and Functions............. 11
Amplifier SeCtiON. La 11
Tuner section aaa enero. 13
Display section ........................ lL. 14
Remote control section ................................ 16
Tuner controls. . 2... earecaecraro. 16
Cassette deck controls. 2... A 16
Function selector cCONtrolS iu... 16
Amplifier controls. o.oo A 17
Compact disc player controls... ......................... 17
TV controls .. eroodoaareneoo.. 18
Video controlsS. RR oro 18
Basic Operating Procedure........................ 19
To listen to a desired audio source while watching
video picture... .......... reecerrreracireerA, 20
When listening through headphones. ................... 20
After use . .... aaa 20
Listening to Radio Broadcasts ................... 21
Manual tuner operation ................................ 21
If noise is excessive inthe FM mode .................... 21
Memory presettings. ................ 0 22
Manual memory presetting ........... 22
Automatic memory presetting. 23
Back-up memory ... 0 eoanaa, o 23
Memory tuner operation... ................... 24
Channel selection using the memory scan button......... 24
If noise is excessive in the FM made .................... 24
Concerning the Parametric EQ System ......... 25
Tone control .............. eee. 25
Parametric EQ ................. iil 25
Using the Tone Control ............................ 26
Adjustment of tonecontrol................... 5..5... 26
Using the parametric EQ ........... ........... 27
Demonstration MOde.... 0.0... . ".... 27
Operation......._ e eéxeeenccrreerirarerreerer ear, 27
Adjustment of the parametric EQ....................... 28
Fine adjustment of the center frequency. ................ 29
Characteristics of center frequency ..................... 29
Storing a curve in memory .......................... 30
To recall a curve from memory ......................... 30
To recalli factory pre-programmed curves ............... 31
About the Dolby Surround System............... 32
Location of speaker systems... ....................... 32
Using Dolby surround ,........................ cia, 33
While listeningtomusic........................... 34
To emphasize low-frequency sound. .................... 34
To adjust the left/right sound balance .................. 34
Recording .....................000000000000 35
Таре гесог@ ea aa ea era 0 35
To listen to the sound being recorded to the tape deck.... 35
VCR(VCR1)recording ................................. 35
Edit-Recording...................... 36
Edit recording from VCR2toVCR1.................... 36
Concerning the Remote Control.................. 37
Battery installation... ................ ol 37
Use of batterieS. 2... reee. 37
Operation note$ ....c0000000 AD 37
Remote Control Operation (Audio) ............... 38
To switch each component's power ON/OFF............ 38
To attenuate the volume level .......................... 38
To adjust thevolume level ............................. 38
Listening to radio broadcasts ...................... .... 39
Listening to compact discs ............................ 40
Sequential play. ...... aa anne 40
To stop play temporarily. ............ 0202..." 40
TO Stop Play. ne en 40
Direct access play. .....0.0.0000000000000 RE 41
Program Play... ee ea 42
To clear the entire program ................ cia. 42
SKIP Play. «oe a 43
Listening to tapes ...................... iL 44
To search for the desired tune...............0... ese... 44
To fast-forward or rewind the tape ...................... 44
To stop playback temporarily ............... ........... 44
Tostop playback ........ co oi влылкев уве внннеоо 44
Recording on tape deck............. eee 45
To stop recording temporarily..................———.—.—.—.e.. 45
To stop recording. ............... oem. .errererererere.s 45
Remote Control Operation (Video) ............... 46
Watching TV broadcastS 00e 46
Watching videotapes . .................... HK 47
To stop playback temporarily .....0.00000000e aa es eee 47
Tostopplayback ........ a La ea ea ea ae ee 47
To fast-forward or rewind the video tape ..........….….….…. …. 48
To activate the Dolby surround effect.................. 48
To adjust the rear volume level ......................... 48
Recording of TV broadcasts... ......................... 49
To stop recording temporarily... ........................ 49
To Stop recording. . ov ovv ieee eee eee 49
Technical Specifications .......................... 50
Troubleshooting Guide............................. 50
Product Service 02000. ".".— 51
Product information ........ aaa a aarioa eee. 51
Index.............. erro. Back cover
The model number and serial number of this product can be
found on either the back or the bottom of the unit.
Please note them in the space provided below and retain them
for future reference.
MODEL NUMBER 000000 eee
SERIAL NUMBER
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Precautions
Before using this unit please read these operating instructions
carefuliy. Take special care to follow the warnings indicated on the
unit itself as well as the safety suggestions listed below.
Afterwards keep them handy for future reference.
CAUTION
RISK OF ELECTRIC SHOCK
00 NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE SCREWS.
NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the products
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangte is intended to alert the user to the
presence of important operating and main-
tenance (servicing) instructions in the literature,
accompanying the appliance.
Safety
1. Power Source -- The unit should be connected to power supply
only of the type described in the operating instructions or as
marked on the unit.
2. Polarization -- If the unit is equipped with a polarized AC power
plug (a plug having one blade wider than the other), that plug will
fit into the AC outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the satety purpose of
the polarized plug.
. Power Cord Protection -- AC power supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Never take hold of the plug or
cord if your hand is wet, and always grasp the plug body when
connecting or disconnecting it.
. Nonuse Periods -- When the unit is not used, turn the power off.
When left unused for a long period of time, the unit should be
unplugged from the household AC outlet.
Precautions mus
Installation
Environment
1. Outdoor Antenna Grounding -- If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built-up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70-1990, provides information
with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements for
the grounding electrode. See figure below.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
x GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC—NATIONAL ELECTRICAL CODE
2. Water and Moisture -- Do not use this unit near water—for
example, near a bathtub, washbowl, swimming pool, or the like.
Damp basements should also be avoided.
3. Heat -- The unit should be situated away from heat sources such
as radiators and the like.
It also should not be placed in temperatures less than 5°C (41°F)
or greater than 35°C (95°F).
Placement
1. Ventilation -- The unit should be situated so that its location or
position does not interfere with its proper ventilation. Allow 10 cm
(4") clearance from the rear of the unit.
2. Foreign Material -- Care should be taken so that objects do not
fall into and liquids are not spilled into the unit. Do not subject this
unit to excessive smoke, dust, mechanical vibration, or shock.
3. Magnetism -- The unit should be situated away from equipment
or devices that generate strong magnetism.
4. Stacking -- Do not place heavy objects, other than system
components, on top of the unit.
Maintenance
5. Surface -- Place the unit on a flat, level surface.
6. Carts and Stands -- The unit should be used only with a cart or
stand that is recommended by the manufacturer. The unit and
cart combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the unit and cart combi-
nation to overturn.
wilh
7. Wall or Ceiling Mounting -- The unit should not be mounted to a
wall or ceiling, unless specified in this operating instructions.
Clean the cabinet, panel and controls with a soft cloth lightly
moistened with mild detergent solution.
Do not use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.
Service
1. Damage Requiring Service -- The unit should be serviced by
qualified service personnel when:
(a) The AC power supply cord or the plug has been damaged, or
(b) Objects have fallen or liquid has been spilled into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not appear to operate normally or exhibits a
marked change in performance; or
(e) The unit has been dropped, or the enclosure damaged.
2. Servicing -- The user should not attempt to service the unit
beyond that described in the operating instructions. All other
servicing should be referred to qualified service personnel.
Preparations
Supplied accessories
AC power supply cord. .......... 1 pc. Remote-control transmitter
(RAK-SAS04P14)................. 1 pc.
AM loop antenna AM antenna holder ............. 1 pc.
(SPB1163T) .................... 1 pc.
FM indoor antenna
(SSA272M)..................... 1 pc.
О)
Batteries
(UM-4, "AAA" ROB). ........... D pes.
Serews ....... 2 pcs.
Preparations comme
Rear panel terminals and functions
OUT
GND С"
Tr ED
2| VOR 1
OJOJO
O1O10
VIDEO OUT
75
FM
ANT
300
Q
AM
ANT
O
o
O
O
O
O
AM
LOOP
(U Antenna connection terminals
See pages 8 —9 for detailed information.
@ “VIDEO OUT” terminal
Connect a video connection cable (not included) to the video
input terminal of TV or projection TV.
(3) Cooling fan
The cooling fan operates at high output power levels only.
(4) Outlets “SWITCHED”
Power to these outlets is controlled by the power switch of this
unit. Audio equipment rated up to 80 W (total for all outlets)
can be connected here. For proper remote-control operation,
connect the power cords of the tape deck and compact disc
player to these outlets as indicated below:
This unit | =
Compact disc d
player
(not included)
Cassette tape
deck |
(not inciuded) ES
(5) AC IN socket (AC IN)
Connect this socket to an AC outlet on the wall using the
power supply cord.
I | | с
E | | 773
AC OUTLETS AC IN~
U
O
O
® “GND” terminal
Connect the turntable’s ground wire to this terminal (if
applicable).
@ “PHONO” terminals
Connect a turntable only. Do not connect any other sound
source to these terminals.
“CD” terminals
Connect a stereo connection cable (not included) to the “LINE
OUT" terminal of the compact disc player.
(9) “TAPE/DAT” terminals
Connect a tape deck or a digital audio tape deck (DAT) by
using stereo connection cables (not included).
TAPE This unit
REC QUT PLAY BACK
o]
PP
“Om (R) (Y
RL UM)
Ч
| S—
Tape deck
(not Included)
“VCR 2” ten .iinals
Connect a second VCR or a video disc player by using stereo
connection cable (not included) and video connection cable
(not included).
VCR 2
IN
tam
T 1
(A (L) (VIDEO)
(R) (L) (VIDEO)
AUDIO OUT VIDEO OUT
LT
This unit
Video disc
player
(not included)
(D “VCR 1” terminals
Connect a VCR by using stereo connection cables (not includ-
ed) and video connection cables (not included).
sel |
(VIDEO) (VIDEO) (E L MU
za
| | (R) 7
La
| 5 e AU 1010
VCR
(not included)
LT
This unit
12 Remote-control OUT terminal
(REMOTE CONTROL OUT)
This terminal can be used only with Technics components
which have the appropriate remote-control terminal.
(Consult your dealer for details.)
Proper connection with remote-control connection cables
SJP2257T will allow control of some functions from this unit's
remote-control transmitter, (See pages 37 —45 for details.)
Connect to a tape deck and/or compact disc player as shown
below.
This unit REMOTE OU
CONTROL
— ——[
Connection cable
for remote-control
(included with tape
deck) WE |
(SJP2257T) REMOTE ®
CONTROL INPUT
“ or to the compact
disc player directly
Tape deck
(not included)
T
Connection cable —— ——— af }
for remote-control
(included with |
compact disc REMOTE b compact disc
layer player
(SJP2257T) = (not included)
(3 Speaker connection terminals
See page 10 for detailed information.
a:
Preparations cows
Antenna connections
FM antenna connections
E FM outdoor antenna (not included)
If the FM indoor antenna does not provide satisfactory reception,
an outdoor antenna should be used.
The outdoor antenna may be required in a mountainous region, or
if this unit is located inside a reinforced-concrete building, etc.
Connection wire from the antenna
— Two types of wire are most commonly used for connection from
the antenna. 300-ohms parallel feeder wire or 75-ohms coaxial
cable. For best resistance to external interference noise, the use
of 75-ohms coaxial cable is suggested.
—
FM indoor antenna
— How to connect a 75-ohms coaxial cable
fS-chms coaxial M Remove a piece of the outer
cable (not included) vinyl insulator ее
E |
Lid
20 mm (25/327)
Tack or tape
o > @ Twist the shield braid to expose
G =) the core wire. Shield braid
/ "UD
O 300-ohms feeder wire hr!
(not included) | 10 тт (3/8”) — Center
conductor
center conductor as shown at the
|
O
@ Connect the shield braid and the O
right. O
E FM indoor antenna (included)
Attach to a wall (using a tack or tape) facing in the direction of best
reception.
For best reception sound quality:
An FM outdoor antenna is recommended.
* The tack should not contact the internal antenna wire.
¢ Disconnect the antenna if an FM outdoor antenna is installed.
AM antenna connections
O
O
©
AM АКТ! О
AM ©
LOOP ANT
EJ
_ >
AM loop antenna
—
AM outdoor antenna
=>
Vinyl-covered wire
(not included)
19000)
E AM loop antenna (included)
Connect the AM loop antenna to the AM antenna terminals, and
mount it vertically to a column, rack.
Move the antenna toward the right or left to find the point of best
reception.
* |f this antenna is not properly installed, AM broadcasts will not be
received.
à Be sure to connect the AM loop antenna even when an outdoor
antenna is used.
Pay attention to the following points when mounting the
antenna.
* Do not mount it horizontally (Doing so will impair reception).
* Do not mount it close to power cords, speaker wires or metal
surfaces (Doing so will result in noise).
* Do not mount it close to a tape deck. When the tape deck is being
used, chirping ar beeping sounds may result.
When mounting the antenna to a column, a wall
or rack
Mount it vertically.
—
Screws (included)
AM antenna holder
(included)
When mounting the antenna to the unit
This type of installation may cause impaired reception or result in
signal noise. If possible, mount the antenna to a rack, a wall, or a
column,
Move the antenna toward the right or left to find the point of best
reception.
Screws (included)
|
|
AM antenna holder
(included)
Rear panel of >
this unit
a
E AM outdoor antenna (not included)
An outdoor antenna may be required in a mountainous region, or if
this unit is located inside a reinforced-concrete building, etc.
Use 5—12 m (16 —40 ft.) of vinyl-covered wire horizontally at the
window, or convenient location.
When the unit is not in use, disconnect the outdoor antenna to
prevent possible damage that may be caused by lightning. Never
use an outdoor antenna during an electrical storm.
Preparations comes
Speaker connections
See page 32 regarding the positioning of the speakers.
Right speaker Left speaker
system This unit system
(not included) REAR FRONT (not included)
B A
R LALRL
9 9 Setas 0 0
+ me (=) +)
Speaker connection cables (not included)
The load impedance of any speaker used with this unit must be “REAR” terminals
8 Q. For connection to rear speakers.
“B” terminals
For connection to a second pair of speakers.
Connection of speaker cables
M Twist the core of the speaker cables. | Notes:
To prevent damage to circuitry, never short-circuit positive (+)
= D — and negative (—) speaker wires.
15 mm Twist
(19/32)
(2) Open the lever, and insert the core until it can no longer be
seen.
$ Lever
Be sure to only connect positive (+) wires to positive (+) ter-
minals, and negative (—) wires to negative (—) terminals.
@ Close the lever, and pull the cable to assure a proper
connection.
Front Panel Controls and Functions
The functions indicated by the numbers with black background
(for example ®) can be activated from the main unit and the
remote control transmitter.
(See pages 16— 18.)
a AG E с, er
= tgs A A A
Ea
Mu
MARCIO PRESET TUNA
8
[DB MIELE PLO STS FE
PHONES. CENTER TAFE /DAT
MOHTOR
EEE 188875
Ea Wh
hep a
DE a
° DIGITAL nuarto sarao
Amplifier section
Speaker selectors (SPEAKERS)
These selectors are used to select the speaker system(s)
(A and/or B).
© Display mode select button
(DISPLAY MODE, -DEMO)
This button is used to select either the spectrum analysis level
(“Bar-type display” or “Dot display”) or equalization level
display.
If the button is pressed for 3 seconds or more, this unit will
start a demonstration mode for the parametric EQ system.
(Refer to page 27 for detailed information.)
Parametric EQ band select buttons
These buttons are used to select the band to be adjusted.
4? Equalization preset buttons
(MANUAL PRESET)
These buttons are used for storing or recalling the curves
made by the parametric EQ system.
Tape-monitor switch (TAPE/DAT MONITOR)
Press this button to listen to a tape or a digital audio tape con-
nected to the “TAPE/DAT” terminals.
To listen to some other source, press this button once again
(so that the indicator is switched OFF).
O Volume control (VOLUME)
0 Headphones jack (PHONES)
— 11 —
27 Parametric EQ system memory button
(MEMORY)
This button enables the curves to be stored in the parametric
EQ system memory.
(22 Fixed preset button (FIXED PRESET)
This button is used to recall a “fixed preset” curve from the
main unit's memory.
@3 Input selector buttons
These buttons are used to select the sound source to be
heard, such as a disc, radio broadcasts, etc. The selected
sound source is shown on the audio input selector/frequency
display.
The “PHONO” input selector has two functions: When press-
ed momentarily it selects “PHONO”. When pressed and held
for about 4 seconds, it de-activates the muting function.
Loudness switch (LOUDNESS)
Set to the “ON” position (the loudness indicator will il-
luminate); when listening to music at low volume. Auditory
perception of sound in the low frequency range falls off at low
volume, but when the switch is in this position, this deficiency
is compensated for, so that the full impact of the musical
performance can be enjoyed.
@5 Dolby surround input balance control
(SURROUND INPUT BALANCE)
This control is used to minimize dialogue leakage in the
surround channel thereby optimizing the Dolby surround
decoding operation.
@ Balance control (BALANCE)
Front Panel Controls and Functions
(continued)
@ @ 09 69
Tec] - AV CONTROL. STEREO RECEIVER SA-GX303
STANDEY
o
© ВТАНОНУ/ ОН rose
MON
д Fr E. CC
L ] | ] |
в Zo OS TL TR SET
[ ] | 1 | | | JJ
| 1 | 2
CO [pourr summouare ] "даже | rex | o PCs f=
PHONES CENTER FREQ/DASS — LEVEL/TAEDLE | ven
Am р! ifier section (continued)
@) Parametric EQ system ON/OFF button
(P. EQ SYS)
This bution is used to turn the parametric EQ system ON or
OFF.
Fine mode select button (FINE)
This button is used to fine-adjust the center frequency of the
parametric EQ.
29 Slope changeover button [SLOPE (Q)]
This button is used to increase or decrease the slope of the
parametric EQ curves.
@0 Parametric EQ/tone mode select button
(P.EQ/TONE)
This button is used to select parametric EQ mode or tone
mode.
@) Center frequency select/bass control
(CENTER FREQ/BASS)
This control is used to select the center frequency in the
parametric EQ mode or to adjust the low-frequency sounds in
the tone mode.
62 Frequency level/treble control
(LEVEL/TREBLE)
This contro! is used to adjust the frequency level in the
parametric EQ mode or the high-frequency sounds in the tone
mode.
6 Dolby surround ON/OFF button (SURROUND)
This button is used to activate the Dolby surround effect.
When this button is switched CFF, no sound will be heard from
the rear speaker systems.
O Rear speaker level adjustment buttons
(REAR LEVEL)
These buttons are used to adjust the volume level of the rear
speakers.
. AV CONTROL STEREO RECEIVEH SA-GX303
Technics
POWER
© БАН У ОН
SPEAKERS Sg woe TONE \
» = a го) co: cod
[ ] | I ] ] HF]
== Ce г. — MA, —
a AO vor MÉRITO X TT
DO IE IT] [roe | пы | aora | e |
CENTER FREQ/BASS LEVEL/TREBLE
о О О
L
1 |
41) 42 43 G4
Tuner section
@ Power “() STANDBY/ON” switch
(POWER, () STANDBY/ON)
This switch is used to turn the power to the main unit ON and
OFF.
Selecting “OFF” from the remote control transmitter actually
sets the main unit to the “STANDBY” mode.
Remote-control signal receptor
(REMOTE SENSOR)
Receives the signals from the remote-control.
@) “STANDBY” indicator (STANDBY)
This indicator illuminates when the “STANDBY mode is set
by the main unit or the remote control transmitter.
O Preset-tuning buttons (1-0)
(30 CHANNEL RANDOM PRESET TUNING)
These buttons are used to preset broadcast frequencies into
the memory of this unit and to recall the desired preset
stations. (Refer to pages 22, 24.)
Tuning control (TUNING)
This control is used to select an FM or AM broadcast.
When turning the control to the left, the frequency changes
downward. When turning the control to the right, the
frequency changes upward. :
Tuning-mode selector/indicator
(TUNING MODE)
Each time this selector is pressed, the selection changes, in
sequence, to “AUTO”, "MANUAL" and “LOCK”.
AUTO:
In this position, broadcast channels are automatically
selected when the tuning control is momentarily turned to the
left or right to start the frequency changing.
MANUAL: |
In this position, the tuning control can be used to locate the
desired channel manually.
The frequency changes only as the tuning control is turned to
the right to left.
LOCK:
In this position, the broadcast channel presently being heard is
locked in, and other broadcast stations cannot be tuned to,
even if the tuning control is turned.
Band selectors
FM: Press this button to listen to an FM broadcast.
AM: Press this button to listen to an AM broadcast.
@) FM mode selector (FM MODE)
This unit automatically switches to the stereo mode when an
FM stereo broadcast is received. This selector is used to
select the mode (stereo or monaural) of FM broadcast signals.
Memory scan button (MEMORY SCAN)
This button is used to locate a desired broadcast station: each
broadcast station is selected for about 3 seconds.
Memory button (MEMORY)
This button is used when presetting broadcast station
frequencies into memory. (Refer to pages 22— 23.)
=,
—
Front Panel Controls and Functions
(continued)
(Hz) 40
63 100 160 250 400 630 IK
16k 25k 4k 63k 10k 125k 16k
Jp, AN i
L—QUARTZ LOCK N
“1 rn FM STEREO
- M. SCAN
CH Lt LA MEMORY
I hd hl NU TP
P.EQ/TONE
[9192 * TONE MODE « PEQ MODE
*MANUAL
07 FINE PRESErM
PILLE LE KHz 123FLAT
[IC] | poe SURROUND
LJ
md
{
{
AY
ala,
,LOUDNESS
kHz MUTING
MHz
6 600 69
47
5 656
Display section
FM stereo indicator (STEREO)
This indicator automatically illuminates when an FM stereo
broadcast is being received.
It will not illuminate if the FM mode selector is set to the
monaural mode.
Spectrum analysis/parametric EQ level display
(SPECTRUM ANALYZER/PARAMETRIC EQ)
This display shows the spectrum analysis level (“Bar-type
display” or “Dot display”) or equalization level.
Quartz-lock indicator (QUARTZ LOCK)
This indicator illuminates when the unit is tuned precisely to a
broadcast station.
Channel display
This display shows the channel number selected by one of the
preset-tuning buttons. |
Also this display shows the channel number for about 3
seconds during memory scan operation.
Band indicators (AM, FM)
Indicates the selected band.
Memory indicator (MEMORY)
This indicator illuminates when the memory button is pressed.
6) Memory scan indicator (M. SCAN)
This indicator illuminates when the memory scan button is
pressed.
— 14 —
62 Audio input selector/frequency display
(INPUT SELECTOR/FREQUENCY)
Displays the selected source or broadcast frequency.
63 Tape indicator (TAPE)
This indicator will illuminate when the tape-monitor switch is
pressed.
VCR display (VCR)
Displays the selected VCR.
65 Loudness indicator (LOUDNESS)
This indicator will illuminate when the loudness switch is
pressed.
Muting indicator (MUTING)
This indicator will illuminate when the muting button (on the
remote-control transmitter) is pressed.
67 Rear level indicator
Displays the level adjusted by rear speaker level adjustment
button.
Dolby surround indicator
( LIC] [DoLBY SURROUND)
This indicator illuminates when the Dolby surround ON/OFF
button is set to ON.
QUARTZ LOCK AM
1 11 FM с
- M. SCAN
сн ДЕЛ MEMORY
69 606) 62 63 Y
+10 ss sis 40 PE Eee
= В se | = | [e ONEM P.EQ MODE
a ZY UE EI fine PRÉSENT
= В ses No ALLY LJ KHz 123 FLAT
—10 1: HENO O
[JC] [poLey surrouno |]
(Hz) 40 63 100 160 250 400 630 ‘ik 16k 25k 4k 63k 10k 125k 16k
STEREO IM ДИ ЛИ ЛИ Г LOUDNESS REAR
27 Ad, ie ТМ
kHz
MHz
MUTING НО НН DANE Ц
MIN ИЦ НО 1 ИИ МАХ
Fine mode indicator (FINE)
This indicator illuminates when the fine mode select button is
pressed in the parametric EQ mode.
Parametric EQ system center frequency
display
It displays the center frequency of the curves in the
parametric EQ mode arranged by the user with the parametric
EQ system or the curves pre-programmed in this unit's
memory.
Parametric EQ system off indicator (OFF)
This indicator illuminates when the parametric EQ system is
off.
62 Tone mode indicator (TONE MODE)
This indicator illuminates when the parametric EQ/tone mode
select button is set to the tone mode.
Parametric EQ mode indicator (P.EQ MODE)
This indicator illuminates when the parametric EQ/tone mode
select button is set to the parametric EQ mode.
Parametric EQ system operation select
indicators (MANUAL/FIXED)
One of these indicators will illuminate in accordance with the
fixed preset button or equalization preset buttons setting.
— 15 —
66
Manual/fixed preset indicators
(1 2 3 FLAT)
It displays the type of curve selected with the equalization
preset buttons or fixed preset button in the parametric EQ
mode.
Parametric EQ system memory indicator (M)
This indicator illuminates when the parametric EQ system
memory button is pressed in the parametric EQ mode.
Front Panel Controls and Functions
(continued)
Tuner controls
Fig. 1
EJ
el ODDO DS
ооо
— bode
——Cassette deck controls —
Fig. 2
DECK
«4 »» | PAUSE
Co
Hé ous
Remote control section
Tuner controls (во. +)
Power switch (POWER)
This power switch is used for controlling the power (ON/OFF) of
this system as well as any Panasonic remote controlled TV
and/or VCR.
When switching the power of each unit ON and OFF, be sure to
first press the appropriate function selector button on the
remote control transmitter.
Cassette deck controls ig. 2
Record button (@ REC)
Press this button to change to the recording stand-by mode.
Deck 1/Deck 2 selector (DECK 1/2)
[|
TUNER TV VCR CD
DO ©
OOOO
Function selector controls
Fig. 3
O {5
Y CH
A
CO OO wer
PLAY STOP IEPAUSE PROGRAM
OS
+10
SELECTOR
HE SKIP pel VCR1 VCR2
CD
SURROUND WREAR LEVELA — [e REC]
CIC О
e RE IE PAUSE
eck [J] ver
4 PLAY >> BESTOP » PLAY STOP
MUTING Y VOLUME A
JN Y
O Preset-tuning buttons (1— 0)
These buttons are used to tune to broadcast stations that have
been preset to the unit's memory.
When these buttons are used, be sure to first press the
control transmitter.
“TUNER” button of the function selector buttons on the remote
@ Playback buttons (< PLAY D)
To begin playback or recording, press one of these buttons cor-
responding to the side of the tape to be played (or recorded).
D>: For the “A”-side of the tape
«©: Рог the “B”-side of the tape
This button is used to select the deck to be operated by
remote control when a double cassett deck is connected with -
this unit.
7) Fast-forward/cue/rewind/review buttons
(<<, >>)
(3 Pause button (II PAUSE)
Press this button to advance or rewind the tape while the unit
is in the stop mode.
Press this button to cue or review the contents at high speed,
while the unit is in the play mode.
Function selector controls ris. 3)
(9 Function selector buttons
(TUNER, TV, VCR, CD)
Stop button (IN STOP)
To stop tape movement.
Press this button to temporarily stop playback or recording.
Press the playback button to resume the play or recording.
These buttons are used to change the functions of this remote
control.
— 16 —
Amplifier controls———
Fig. 4
SURROUN
P YREAR LEVELA
O EJ OO
©
MUTING
У
VOLUME
à
es
TUNER TV VCR со
OO O
ооо
~Compact disc player controls —
Fig. 5
6 7 8 9 0
OCC CC)
CO в TV/VCR
T
OOOO
PLAY MSTOP HIPAUSE CONTINUE
JOO O
|
HAASE
+10
с
—————
SELECTOR
4d SKIP bel УСВ 1 VCR2
со
SURROUND YREAR LEVELA
— [eREC!
J
Hq SKIP Pei
eS — CD
> PLAY [stor И РАЦЗЕ TRE,
KX
|
Ш
J)
UN PAUSE
J CJ
VCR
PAUSE | Ha REY FF
MSTOP| »PLAY BESTOP
DD OO
MUTING У VOLUME A
JL
JL
Amplifier controls (ео. 4)
@ Dolby surround ON/OFF button (SURROUND)
This button is used to activated the Dolby surround effect.
(77 Muting button (MUTING)
This button is used to temporarily attenuate (“mute”) the
volume level.
Compact disc player controls (is. 5)
® Rear speaker level adjustment buttons
(W REAR LEVEL A)
These buttons are used to adjust the volume level of the rear
speaker systems.
@ Volume contro! (Y VOLUME A)
These buttons are used to adjust the volume level.
VW: To reduce the volume level.
Á: To increase the volume level.
Numeric buttons (1-0, +10)
These buttons are used to select the track or the disc number
(only 1—5).
When these buttons are used, be sure to first press the “CD”
button of the function selector buttons of the remote control
transmitter.
Stop button (II STOP)
To stop compact disc play.
Play button (p> PLAY)
To start compact disc play.
Skip buttons (4d SKIP pp)
Press one of these buttons briefly to move the pickup
(backward or forward) to the beginning of a specific track.
Program/continue button
(PROGRAM/CONTINUE)
This button is used to select either the sequential play or pro-
gram play mode.
Disc button (DISC)
This button is used to select the disc when a muiti compact
disc player is connected with this unit.
69 Pause button (II PAUSE)
To temporarily stop compact disc play.
Front Panel Controls and Functions
(continued)
— IN controls —— ——
Fig. 6
mE
TUNER TV VCR CD
O
„ООО
ооо
OOOO
r———Video controls —— ——
Fig. 7
{ODDO S
8 7 8 9 0 6 7 8 9 0
OOOO OO ES men JE О © О © ©
Y CHA P PLAY MSTOP NPAUSE PROGRAM Y HA
CD (Ofer Г) [) Г) QO conte J TV/VCR
| O o
Ne J SELECTOR
Hed SKIP pei VCR 1 VCR2
cD
SURROUND YREAR LEVEL [ [eREC]
DECK
1/2 BI PAUSE BI PAUSE
() vec ver ([) von
44 b> ИН! РАЦЗЕ REW №» РЕ
«<< PLAY >
OI
> PLAY IESTOP
С)
JJ
CJC
MUTING
UME
A
JN
|
| ` 7
Remote control section cinq
TV controls (Fig 6)
When the buttons (67, €3) are used, be sure to first press the “TV”
button of the function selector buttons of the remote control
transmitter.
Preset channel buttons (1 — 0)
These buttons are used to select TV channels.
69 Channel up/down buttons (Y CH 4)
These buttons are used to select TV channels.
Video controls (ig. 7)
When the buttons (69, 69) are used, be sure to first press the “VCR”
button of the function selector buttons of the remote control
transmitter.
Preset channel buttons (1—0)
These buttons are used to select video channels.
69 Channel up/down buttons (Y CH 4)
These buttons are used to select video channels.
Selector buttons (SELECTOR)
VCR 1: Press this button to select the “VCR 1” input selector
position on the main unit.
VCR 2: Press this button to select the "VCR 2” input selector
position on the main unit.
02 Record buttons e REC)
These buttons are used to record.
Fast-forward/rewind buttons
(<Q REW, DD FF)
Press one of these buttons to advance or rewind the tape while
the unit is in the stop mode.
64 Playback button (> PLAY)
This button is used for video playback.
Pause button (11 PAUSE)
This button is used to pause during playback or video recording.
00 Stop button (IN STOP)
This button is used to stop playback or video recording.
Peso -perana Procedure
С SPEAKERS
VCR 1 VCR 2 MONITOR cD TUNER | PHONO |
== — 5
Tape indicator |
АУ AB A SA-GX303 Î
POWER rT
TE FEE CE Eesti
= wer | EEE EE EERE Ram
SMED те yl all sk DE
+ EZ ra | EJE Т Gi | | CI 28 19 TOO 2 ВВ К E м == Re mmm.
0 Rov | uno GRID ea Но —
| L | | | 1 |
l= {Tlf T 07-7
mmm [pe] = Tee] | ee TT |
| CENTER FREO/BASS LEVEL/TREBLE | VR 1 | "CA 2 | TAPE FDAT co | TUNER | PHONO |
MONITOR
——e © ©
4 VOLUME
Start the
Headphones (not included) sound > SS
source.
Plug type:
1/4 inch phone plug stereo type
1 Set the power switch to ON. 4 Start the audio or video source.
(Refer to the appropriate operating instructions for details).
2 Select the “A” and/or “B” speaker system(s) 5 Adjust the volume level.
to be used.
When only one speaker system is connected, no sound will be
heard if both speaker selectors are pressed.
3 Select the audio or video source.
VCR 1: Press this button to watch video tapes from the VCR
connected to the “VCR 1” terminals.
VCR 2: Press this button to watch video tapes from the VCR
or video discs from the video disc player connected
to the “VCR 2” terminals.
TAPE/DAT MONITOR: Press this button to listen to tape or
digital audio tape connected to the “TAPE/DAT" terminals.
No other sources selected by the input selector can be heard
while the tape indicator is illuminated. To listen to some other
source, press this button once again.
CD: Press this button to listen to compact discs.
TUNER: Press this button to listen to radio broadcasts.
PHONO: Press this button to listen 10 phono discs.
It is recommended that the power to the compact disc player
be switched OFF when it is not being used.
— 19 —
Basic Operating Procedure oie
To listen to a desired audio source while
watching video picture
Refer to page 19 and follow the procedure below.
| Follow steps 1~2 on page 19.
2 Select the desired video source and audio
source in step 3 on page 19.
Be sure to select the video source first.
3 Start the video and audio source.
When listening through headphones
Use the volume control to reduce the volume level, and connect
the headphones to the headphones jack.
If sound from the speakers is not wanted, set the speaker selectors
(“SPEAKERS”) to the “OFF” position.
Set the Dolby surround ON/OFF button to OFF when the rear
speakers are connected.
Avoid listening for prolonged periods of time to prevent hearing
damage.
After use
Be sure to reduce the volume level, and switch OFF the power
from the remote-control transmitter or by the power switch of this
unit.
Note: The input selection and the muting settings will be retained
(as they were at the time when the power was switched OFF) by
the memory back-up function.
Listening to Radio Broadcasts
NODE. 4 TUNING
e
$, O
NN
CO [au sumrcano | "ss | ron | sae | sx
L | |
FM MODE
AUTO/MON
M à n U al tu ner ope ration (to listen to broadcasts by using the tuning control)
Have you completed the steps (on page 19) of
“Basic Operating Procedure” ?
1 Press the “TUNER” button. 4 Turn the tuning control so as to tune to the
desired broadcast.
In “AUTO” mode, the next station, higher or lower in proad-
cast frequency, will be automatically tuned in.
2 Press the “FM” or “AM” button. In “MANUAL” mode, the frequency will change, using the
-.. smallest step available, only as the tuning control is being turn-
ed. This will allow you to tune in alt of the broadcast frequen-
cies available in that band.
3 Select the desired tuning mode, “AUTO” or If you want to lock the broadcast channel presently being heard,
“MANUAL”. press the tuning-mode selector to select the “LOCK” position.
If noise is excessive in the FM mode
Press the FM mode selector. FM MODE
UTO/MON
The sound will then be heard in monaurai and the FM stereo
indicator will not illuminate. If the broadcast signal is weak, or if
there is a large amount of interference, sounds can be heard more
clearly.
Listening to Radio Broadcasts ume
Ш
©
IRN
=
O
TUNING в
MODE
Д =
O
. Ay REO RECEIVER SA-GX303 NN.
h
POYWER — vena TR
ГЕ = : | % |
smc ENEE E E
В mE E I WS ES
& STANDBY 7 OM
_ |990 © 89 © 0 750 ко 60 1x 2 Oi AM Dx Um
SPEAKERS КОТОМ is
по T0 || ВОЕН ВЫ ти
ot
— Ca 3 ES A none
A ло rater Pelo 1 EE >
[ | L 1 I I | ]
я + 4 а 1
DO [carr susacuvo PAYS FUE sige po SRA
CENTER FREQ/@ LEVEL/TREBLE
PHONES ASS | VER 1 | уса? | TAPE/DAT | co [re
7
© (O) © _ DIGITAL coin somos
mot en” \ сни
L 1
Memory presettings
—
: |I2|237a]T8sTe]7]TJalsaTo
steps
2 through 6.
©
You can program 30 AM/FM radio broadcast stations into memory,
so that any desired station may be selected by simply touching one
or two buttons. (See pages 22~24.)
Manual memory presetting
If a new broadcast station is preset into a channel, the broadcast
station which was previously entered in that channel will be
automatically erased.
Have you completed the steps (on page 19) of
“Basic Operating Procedure” ?
1 Press the “TUNER” button.
2 Press the “FM” or “AM” button.
3 Select the desired tuning mode, “AUTO” or
“MANUAL”.
Turn the tuning control so as to tune to the
desired broadcast.
In “AUTO” mode, the next station, higher or lower in broad-
cast frequency, will be automatically tuned in.
In “MANUAL” mode, the frequency will change, using the
smallest step available, only as the tuning control is being turn-
ed. This will allow you to tune in alt of the broadcast frequen-
cies available in that band.
— 22 —
5 Press the memory button momentarily.
(The memory indicator will illuminate.)
If the memory button is pressed and held until the frequency
begins to change, the automatic memory presetting (See
page 23.) is activated. To stop the automatic memory preset-
ting, once again press the memory button. Then begin again
from step 4.
To cancel the memory function, press the memory button
again.
6 Select the desired “CHANNEL”.
To designate channels 1 — 9:
Press the appropriate (1 — 9) preset-tuning button.
To designate channels 10 —30:
(D Press the button for the most significant digit (1, 2 or 3).
(2) Press the button for the least significant digit (1 —0) within
2 seconds after pressing the first button.
If the interval between pressing the first button and pressing
the second button is more than about 2 seconds, the setting
may not be made correctly. If this happens, make the setting
once again (following step 5).
7 Repeat steps 2 through 6 to make additional
memory presettings; for later reference, note
the presettings in the station memory file on
page 24.
3
Y CONTROL STEREO RECEIVER SA-GX303 a. Ds
TUNING
O O
q
DX (eorav somaoiers] | ess | me | | |
CENTER FREQ/BASS — LEVEL/TREBLE
mirate
о ОО
DHGITAIL, otro someomo
o © ©
_ |
||
Automatic memory presetting
Have you completed the steps (on page 19) of
“Basic Operating Procedure” ?
When this method is used, the frequencies of the selected broad-
cast stations are automatically preset (in sequence from lower to
higher frequencies) into memory: “channels” 1 to 30 are available
for the presetting of FM stations, and “channels” 21 to 30 are
available for AM stations.
When a presetting is made to a channel that has already been
preset, the prior presetting will be erased, so if, for example, FM fre-
quencies are preset to channel 1 to 30 and then AM frequencies
are preset, the first AM frequency will be preset to channel 21 (thus
erasing the FM presetting to channel 21), the second AM frequen-
cy will be preset to 22 (erasing FM 22), and so on.
1 Press the “TUNER” button.
Press the “FM” or “AM” button.
Select the desired tuning mode, “AUTO” or
“MANUAL”.
4 Turn the tuning control so as to set to the
frequency from which you want to start
automatic memory presetting.
In “AUTO” mode, the next station, higher or lower in broad-
cast frequency, will be automatically tuned in.
In “MANUAL” mode, the frequency will change, using the
smaliest step available, only as the tuning control is being turn-
ed. This will allow you to tune in all of the broadcast frequen-
cies available in that band.
Press the memory button until the frequency
begins to change.
(Automatic memory presetting will start.)
For automatic pressetting in areas where there are fewer than 30
stations for FM broadcasts, the remaining channels will be left
unused. The unused channels can be filled by following steps 2
through 6 (on page 22.)
Back-up memory
The back-up function maintains the preset memory and the most-
recent memory (see below) when the power is switched OFF, in the
event of a power failure, or if the power cord is disconnected.
The memory will be maintained for as long as approximately one
month.
Most-recent memory
The most-recent memory system ‘remembers’ the broadcast sta-
tion last tuned to when the unit was switched OFF. That station will
be automatically tuned to when the power is switched ON.
— 23 —
If frequency presettings are accidentally erased
1. Switch ON the power switch for an hour or longer.
2. Repeat the frequency presettings procedure once again.
Listening to Radio Broadcasts connue
1
2
|1 [2 ] 3 ] 4 | 5 {в |7 [в] э То]
3
|
M = m O ry t u n = r O pe rat | O n (to listen to broadcast stations preset into memory)
Have you completed the steps on page 19 of
“Basic Operating Procedure” and on pages
22 - 23 of “Memory presettings” ?
1 Press the “TUNER” button.
. AY CONTROL STEREO RECEIER SA-GX303 |
Technics Г
POWER {
+2 1 BE E E a
т L = полны.
STANDRY i 3 2 om SR
a = | = " ® 5 мата Нат
# Вне E
© STAHOE / ON OTE MD «о E VO XO TO 400 80 во x IN dan EE YA UE OW [mr menses] |
SPEAKERS т a" r7 ва
= EEL || O DARA a fe й
1 I | | | | | I ] PRLUIT CHANNEL PT SOLCTORTA GAREY oro | f y
get won ARLES yA PRESET — LANDON POST TUNE —
Do |. Г. |}
— |
0er [| | og [| I
и 3 rose
PHONES CENTER FREC/BASS — LEVEL/TREBLE | von | vor? | TAPE/DAT | со | том | | ESA Eater Me
vd wo los
© - O {3 OMITA veto sumo.
ur” À price = À pont
|
| FM MODE
MEMORY
AUTO/MON
SCAN
О Select the desired “CHANNEL”.
To designate channels 1—9:
Press the appropriate (1—9) preset-tuning button.
To designate channels 10 — 30:
(1) Press the button for the most significant digit (1, 2 or 3).
(2) Press the button for the least significant digit (1—0) within
2 seconds after pressing the first button.
If the interval between pressing the first button and pressing
the second button is more than about 2 seconds, the setting
may not be made correctly. If this happens, make the setting
once again.
Station Memory File (Use this file to record your memory selections.)
ch. 1 ch. 2 ch. 3 ch. 4 ch. 5 ch. 6 ch. 7 ch. 8 ch. 9 | ch. 10 | ch. 14 | ch. 12 | ch. 13 | ch. 14 | ch. 15
ch. 16 | ch. 17 | ch. 18 | ch. 19 | ch. 20 | ch. 21 | ch. 22 | ch. 23 | ch. 24 | ch. 25 | ch. 26 | ch. 27 | ch. 28 | ch. 29 | ch. 30
Channel selection using the memory scan button
This feature is convenient for use when trying to locate a certain Preset channel number
broadcast, or to listen to each station briefly to hear what is being —
broadcast. utero LU LI O1 СН)
CH - M.SCA Li LJ. { MHz El
Press the memory scan button.
Each frequency will then be heard (in seguence)
for about 3 seconds.
MEMORY
SCAN
The preset channel number will be displayed in the channel
display.
If noise is excessive in the FM mode
Press the FM mode selector.
FM MODE
UTO/MON
EH When a broadcast you want to listen to is
found
Press the memory scan button
(The broadcast will continue, even after 3 seconds
have passed.)
MEMORY
SCAN
The sound will then be heard in monaural and the FM stereo
indicator will not illuminate. If the broadcast signal is weak, or if
there is a large amount of interference, sounds can be heard
more clearly.
Concerning the Parametric EQ
System
There are two methods for adjusting the frequency response of
this system: the tone control and the parametric EQ; Select
whichever method you prefer.
Tone control
After changing this unit to the tone mode, use the bass control or HQ ww ща e AO ВН
treble control to adjust the balance of high-frequency and low-
frequency sounds.
'
Blo
ol HIB NS
tHe) 40 63 100 150 250 400 630 1k 16k 25k 4k 63K 10k 125k WK
Example: In case the high-frequency range and the low-frequency
range are boosted.
Parametric EQ
Conventional Graphic Equalizer only allow you to adjust the level of Variable center frequencies
certain fixed frequency ‘‘bands’. Additionally, adjusting one fre- Y Y Y v
guency “band” may also affect the level of adjacent frequency *® 0 = =e 2 2
“bands”. gama TA UN ME Ts gg
The Parametric Equalizer, on the other hand, gives you four selec- _5 5
table frequency bands with a choice of 27 different frequencies (Hz) 40 63 100 160 250 £00 630 1 16% 25% ER EI 10k J25k 16%
from 40 Hz to 16 kHz. Also, the band width can be set “wide” or
“narrow” for each selected center frequency.
This will determine how adjacent frequencies are affected by level
adjustments in each band.
Example: Four bands of 10 dB boost
— 25 —
Using the Tone Control
2
P. EQ/
TONE
1 P. EQ SYS
OFF/ON
AV CONTROL STEREO RECENER sa-Gxaos_/ /
£
TH Rte sa
+4 1
Ï
= — "LT —
1 Enea
> ||]EDDADEOEREN DEE: :000=
mo e. A eee edi DE)
e es e e [© bed AR BE nn oo oot humans,
SAT CHAM a QU WO
ers JA ee
1
— 4 eel fe ff |
7
mms [R= Tw [2] || O— se [TS
PHONES CENTER FREQ/BASS
| | TAPESDAT
YCA Y | YCA 7 MOTOR | co | TUNER | PHONO |
o VO
LOUDWESS SURROUND BALANCE
OFF pom PIT BALANCE
` i LA ` I x
O (Y YX
> - > ~ DIGITAL. nciarro paseo
f ` f `
LET Ca LEST Coral
3 CENTER FREQ/ LEVELS
BASS TREBLE
Adjustment of tone control
1
Turn on the parametric EQ system.
(The parametric EQ system off indicator goes out.)
Parametric EQ system
off indicator
+
10
P.EO /TONE ——
+PEQ MODE
= MANUAL
"e
FELL
= =
= Hz
0
ЦМИ 9
Sl ito
HD 40 63 00 160 250 400 630 ww 16k 25k dk 863k 10k 125% 16k
Press the parametric EQ/tone mode select but-
ton to select the tone mode.
(The fone mode indicator will illuminate.)
Tone mode
indicator
+10 40 Р.ЕО ТОНЕ
= = «TONE MODE
0 ni RI waa aa area HHH mun mann HH пин пи НН пи Er mI 20
-5 5
Hz} 40 63 KO 169 250 400 630 1k 16k 25k 4k B3k 10k 126K 16k
LI
3 Adjust the tone balance.
Adjust the low-frequency sound to the desired
level.
CENTER FREQ/BASS
©
Adjust the high-frequency sound to the
desired level.
LEVEL/TREBLE
©
Note that these controls can be rotated beyond their positive
(+) or negative (—) extremes.
However, when either extreme is reached, the controls have
no effect.
Caution:
Extreme level adjustments in either frequency band may
cause damage to your receiver and/or speakers.
Using the Parametric EQ
1 2 -DISPLAY MODE 3 -DISPLAY MODE
Start the DEMO E
sound
source.
‘os AV CONTROL STEREO RECEIVER SA ara
TT E 11 en 0e ee ea a 0
Вне ай НН Ho og HLF,
Ror won JER A ESE — an
[ | с
ТТТ ТТТ ТТ: Г: ||
Dome | eggs | me | A | ne [Jee [7 |]
PHONES © © | vor | ver? | = | co | TUNER | FHONO |
L |
Demonstration mode
In order to make the parametric EQ system easy to use, this unit
comes with a factory programmed demonstration mode (adjust-
ment example).
Refer to the demonstration as you carry out the operations on the
following page, if necessary.
Operation
1 Start the sound source. 3 Press the display mode select button momen:
tarily.
2 Press and hold the display mode select but- The demonstration mode is cancelled and the display swit-
ches to the original display mode.
ton for 3 seconds or more. The preferred display mode can now be selected
The demonstration mode will start. pre pay
Sound will be changed according to the change of display.
The demonstration mode is automaticaily repeated.
— 27 —
Using the Parametric EQ continues
5 LEVEL/TREBLE
MO
VOLUME
EQ1 EQ2 EQ3 EQ4
т "TT — 3
Techni
1 Select the sound 2 REE
source and
ИГ
cs
start its playback.
SPEAKE 7 PEC
pr
] 1
©
в Lor ME ; / Ti PT
]
CI HTT 71 1
у
FINE pm —
AV CONTI
\
TAPE/DAT со TUNER MAE ae MANE
MONTOS PHONO 1, 1,
O OS O: DIGITAL veuves somme
FT est PAT
I
Repeat steps
4~8.
Adjustment of the parametric EQ
1 Select the sound source and start its 4 Select the band to be adjusted.
playback at a moderate volume level. (The center frequency level and band indication to be
adjusted will flash for about 5 seconds.)
EQ1: 40 Hz~ 400 Hz to be adjusted
+10 40 PEO MONET
=. Neo = “MANUAL
2 nun ann PAS SENO HENO RENO SENO RES NN OHNS RENO NANO SEI SENO CRES 2 nn A
. | буи °
Turn on the pa rametric EQ system (Hz) 40 63 0:00 169 250 400 630 IK 16k Z25k 4k 63k 10x 125k 16k
" ла л
(The parametric EQ system off indicator goes out.)
Parametric EQ system
off indicator EQ2: 160 Hz~1 kHz to be adjusted
+10 40 PR EO/TONE SE
P.EQ/TONE —— 5 MEE ann NICO NR ps kr RENO NEC IGNORADO HENO NETO ISO NATI 25 - MANDAL
= PEQ MODE = 7 - MA "
= Ea -0 5
= LEEN He Y 1 # à
© (Ho) 40 53 100 180 250 200 630 1k 16k 26k «к 63k 10k 125k 18k
HY 40 63 KO 160 250 400 630 IK 168k 25x de ВОК 10K 125k 16K ! ! \ \
EQ3: 630 Hz~6.3 kHz to be adjusted
*s “2 SEO MODE
Dan mer we mena mm un bg de a den = “MANUAL
2 GEN OHNE OHNE о нпио пин о ный mE ный man лу um que вип о опий ный © > с IY cu
3 Select the parametric EQ mode. 5 Na 5
‘ a a ‘ ‘ . (Hz) 63 109 160 250 400 699 IK 16k Z5k 4K 63k ‘Ok 125k 16K
(The parametric EQ mode indicator will illuminate.) we Ea
Parametric EQ
mode indicator
EQ4: 4 kHz~ 16 kHz to be adjusted
+6 ñ PO TE ES MODE
Se Le care ve ни а щи шо о \Vo+ os = “MANUAL
2 ZEN OHNE OEL ET EE EEE LA HEN TT RE EE AA 3 2 0 x
76 vod ©
\ t
(Hz) 40 63 КЮ 159 250 400 630 1K 18k 25% dk ВЗК Dk 125k WK (HD 40 63 0 150 250 400 630 IK 16K 25k 4k 83k (бк 125k so
/ Po \
5 Set the center frequency level (flashing bar) to
+10 dB.
The illustration shown below is an example for EQ1.
PEO TONE ————
"PEO MODE
* MANUAL
1
`
7
= пин
emi
{kiki Hz
HCl
>
ot Sd
ml
-10
Y 7
Hz) 40 63 100 WO 250 400 630 1k 16k 25x dk EIN 10K 125k 16k
1 | 4
6 Select the preferred slope, “narrow” or
“wide”
The curve slope selection changes from “narrow” to “wide”
each time this button is pressed.
The illustration shown below is an example for EQ1.
when “narrow” is selected:
“1,
+10 ини 40 P.EQ/TONE
- 71% - *PEQ MODE
= wo an = “MANUAL
0 ni Bun tee MIN HEIL GEN MEME EMI пни UE ammo am 20 a
= = ELF Hz
-© 0
NI dy
\
Hz} 40 63 100 10 250 400 830 ik 16k 285k 4k вок 10K 125k 16k
PoR | A
When “wide” is selected:
+19 arm! 40 P.EQ ONE —
- aun | LE = SPEC MODE
=F пит = * MANUAL
2 ; 2 (rr
= = гы Hz
, A 1 1 #
Hz} 40 63 102 160 250 400 630 1K 16k 25k dk GIK 10K 125k К
ил
Fine adjustment of the center frequency
©
In step 7 above, press the fine mode select button to select the
desired center frequency while watching the parametric EQ
system center frequency display.
(The fine mode indicator will illuminate and you will notice that the
frequency spectrum now has more resolution.)
7 While listening to the sound source, select
the desired center frequency.
See the “characteristics of center frequency” section below
to help you determine the desired center frequency.
To select the center frequency more precisely, see
“Fine adjustment of the center frequency” below.
8 while listening to the sound source, readjust
the level as required.
+10 IZ 40 PEO TONE ne
5 um mn / | Nm NEO NO NRO Ne e RAMO NEE À NETA
O REE GEO ENCENDER NERO ATEO IAN NACO NES 0 En
= = LEE HZ
_ 0
9 Repeat steps 4—8 to adjust the center fre-
quency in the remaining bands.
Caution:
Extreme level adjustments in any frequency band may cause
damage to your receiver and/or your speakers.
P. EQ fTONE —————
REQ MOCE
«MANUAL
1 m£E————Fine mode
indicator
Ok 125k Wk
Parametric EQ
system center
frequency display
Characteristics of center frequency
40 Hz~63 Hz
This is the deep bass sound range. When this level is increased,
the sound quality of a bass guitar, drums, etc. will be stabilized for
a full, rich sound.
100 Hz~160 Hz
This is the bass sound range. When this level is increased, the
sound will seem to have a greater fullness and depth. Indistinct
sounds can, moreover, be made distinct by lowering the level.
250 Hz~400 Hz
This range is the fundamental sound range. When this level is
increased, a forceful “punch” is added. This level adjustment is
also used to add additional richness to male vocal sounds.
630 Hz~1 kHz
This is the range in which most of the vocal range of the human
voice is included. By increasing the control setting, vocal reproduc-
tions become more full of life, and greater realism and ambience
can be added.
— 29 —
1.6 kHz~ 2.5 kHz
String instruments and wind instruments are in this range. When
this level is increased, their brilliance is emphasized for more
colorful sound.
4 kHz~6.3 kHz
This is the range for adjusting sound’s luster and brightness.
When this level is increased, an additional degree of brilliance and
color is added. For sounds which seem too metallic, on the other
hand, they can be softened by reducing the level.
10 kHz~16 kHz
This is the range in which finely subtie tones of radiance and splen-
dorous luminance can be added. By increasing the control setting,
an extra measure of glitter can be added, for example, to the
sounds of the cymbals, triangle, etc. This control can also be used,
by reducing its setting, to decrease annoying tape ‘hiss’ noises.
Using the Parametric EQ conne
1 Adjust the 2 МЕМ
parametric
EQ as
desired.
4
Repeat steps
1-3.
AV CONTROL STEREO RECEIVER A
zs
e MANUAL PRESET
1
ILL
и paf
=
ORY
Ро
REMOTE
=
vs [Fw] = [ow [ow | || C3
CENTER FREO/BASS LEVEL/TREBLE | | | |
© O) © - qe | mos | © | ha mee
||
Storing a curve in memory
Up to three curve presets can be stored in this unit's memory.
1 Adjust the parametric EQ as desired. 3 Select the channel of your choice.
(Refer to pages 28 —29.) (The selected channel illuminates.)
+
2 Press the parametric EQ system memory
button.
(The parametric EQ system memory indicator illuminates.)
Sitio
x
x
Parametric EQ system memory indicator
ВАННА mint mina INT
>
P.EQ TONE
+
10 o —
= - *PEQ MODE
= aim пи ции пин пни = * MANUAL
Q ERROR EEE une HEN 20 ‘ = 7 "E
= SHEL HL кн:
- 5
Hd 4 63 0) 1160 250 400 630 Jk 16k 25k 4k 63x ‘Ok 125k бк
4 Repeat steps 1—3.
40 53 KO ‘60 259 400 630 1k Bk 25k 4k 63k ‘Ok 125k 16k
Selected channel
To recall a curve from memory
Use the equalization preset button to select the MANUAL PRESET
channel of your choice. — _—
(The selected channel illuminates and the stored curve will be
displayed for about 2 seconds.) N
Selected channel
+10 men ими nur nus 40 PEC TONE ——
3 pus EE ma REN me a TN mar re un 2 y 4 ca
= = tL tL
-0 0
iz) 40 63 00 160 250 100 690 1k 16k 25k 4k БЗК 10k 128k 18k
— 30 —
FIXED
PRESET
AV CONTROL STEREO RECEIVER SA-GX303
-
Technics
POWER мило | ман LOCK
в a a
o — — "LONG eee
E * ET To aan HE нося, TUNING
STAND i 2 Fed els,
a = 858 м ET
a" be. BY wa CL I ae ee = 8
DSIANO ON [ocur mino]
’ PEMOTE > 0 de 00 MO 250 400 430 u A IS U A А dam E a == $,
SON
SPEAKERS CO Ea
STEREO CF
Srl BEE Hw ag osm
‘ wy BB Wc re rs — —
— == = == === |
= o — Maga WANDA PATSLT TUNING
E ac Mu Y ST ea T3
L ] L 1* | | 1 ]
[0 {бен залом Ka vos | sg A
[Jems e Pe ESE
sos
-
-
`
‘ E
T
TER F LEYEL/ TREBLE | LOUONESS SA BALANCE
PHONES CENTER FREQ/BASS | VCA 1 ven 2 | TAPE/OAT | co | TUNER | CFF Om veut BALANCE
` Æ
© © © O O: O DIGITAL. AUTO TAO
ur of Lo ar
| ||
To recall factory pre-programmed curves
Four factory pre-programmed curves are conveniently arranged in
this units memory. These are: PRESET 1 (heavy), PRESET 2
(vocal), PRESET 3 (soft) and FLAT.
Select the one of your choice.
Press the fixed preset button. FIXED
PRESET
Each time the button is pressed, the fixed preset indicators Led
illuminate and the display changes as shown below.
PRESET 1 (heavy) PRESET 2 (vocal)
This curve can be used to add “punch” to rock and other music. This curve can be used to clarify vocals.
Fixed preset indicator
+. 40 P.EQITONE ——— +10 NA 40 PEQ/TONE ———
E am = "REO MODE - un: ВЕ sme Ни = "РЕОМООЕ
9 ций HE am ви ош го = rn nn FIXED © ER nm ee mae овцы TUN a ний nus ann 29 - = AXED aaa
— = pap UU UU TUTTO TUTTO UT TT TT UT ai - fh и ин PRESET So mm в - a Li HL PRESET
-10 9 —10 о
Hz) 40 63 KI 150 259 400 630 1k 16k 25k dk 63k 10k 125% WK Hz) 40 63 100 160 250 400 630 IK Bk 25k de 63k 10k 125k 16k
FLAT PRESET 3 (soft)
This curve can be used to return to the initial state. This curve can be used to listen to background music, etc. at a
low volume level.
- - 2 ES TEO MCOE "2 Зин © f be MODE
bs EE EE EE A EE EM umt GER ONE RASO nnn o - ÉD === 0 пин ' ve мня BER mw 25 e FIXED р
= 2 A LE Li kHz PRESET T = vues HUE = { AI kHz PRESET
-0 9 —10 an СГ ©
Ho 40 63 100 160 250 400 630 IK 16k 25k 4k 63k 10k 125k 15% (Hz! 40 63 0 160 250 4CO 630 1K 16x 25k ak S3k 10k 125k 16k
About the Dolby Surround System
The Dolby surround system is a system that provides the concert
hall effect of refiected sound when playback of signals recorded by
the Dolby surround system.
To enjoy the Dolby surround system, be sure to connect the rear
speakers to the “REAR” speaker terminals on the rear panel.
Location of speaker systems
Front speaker (left) Front speaker (right)
—7 \_
— NN
Sz
Rear speaker (left) Rear speaker (right
The listening position at which the effect is the greatest is a posi-
tion slightly to the rear of a center position of four-speaker
systems. However the position should be adjusted to our personal
preference, because the effect varies to some degree depending
upon the type of music and the music source.
— 32 —
Ш Dolby surround
Manufactured under license from Dolby Laboratories Licensing
Corporation. Additionnally licenced under one or more of the
following patents: U.S. numbers 3,632,886, 3,746,792 and
3,959,590; Canadian numbers 1,004,603 and 1,037,877.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Start the desired
Dolby surround
recorded program
VOLUME
2
SURROUND
INPUT BALANCE
source.
Technics AV CONTROL STEREO RECEIVER SA-6X308
*®
TANCIA 3
-©
„ +9 A EDITA —— 1
= MED + ное Моско + FED LATE
“Ey
9
ETT
FAME Es #0 NOK ет ПВО бор 60 то бя БЫ an BE a ga Me DO (cour miami,
SENSOR
CUA AM
С PR fu STEMIO Г ra TE] maz
28 e ES ан нося
cb evo . we DE MN, == = MA
tral LT Сани AT CDC A am A 200
= EL AAA PAST Tora
| " | + | 3 | ` | 3 | + | 8 | | a |
[=== [| = / ==N
Le | || |
ee
BALANCE
1
PECAR LENTE
TUNER | PHONG N
A
3 | | surnouno
NS
4 SPEAKERS
5) =r
Using Dolby surround
-
Z—
~~
5 (6 -
ZN
A
ZN
7
VOLUME
O
Ne
LEEL[ Y | al]
©
Start the desired Dolby surround recorded pro-
gram source.
Set the volume to a comfortable level.
Press the Dolby surround ON/OFF button to
activate the Dolby surround effect.
(The Dolby surround indicator will illuminate.)
Dolby surround indicator
+10 40 Р.ЕО ТОМЕ
= pu OFF "FEO MODE
= = MANUAL
0 0 nn
= = HLULE Hz
-5 5
DO
{Hz} 40 63 400 180 250 400 630 1k 16k 26k 4k 63k Wk 125k 16k
Set the speaker selectors to “OFF”.
When monaural sound such as conversation,
etc. is heard from the rear speakers, adjust
with the Dolby surround input balance con-
trol so the conversation, etc. is not heard.
SURROUND
INPUT BALANCE
O
Set the speaker selectors to “ON”.
— 33 —
6 Adjust the volume level of the rear speakers
as desired.
(The volume level of the rear speakers will be displayed on the
rear level indicator.)
Adjust the volume level.
(The volume level of the front and rear speakers will be
adjusted simultaneously.)
Note: Sound may be heard from the rear speakers even if the rear
speakers volume level is set to the minimum.
While listening to music
LOUDNESS
OFF/ON
BALANCE
AV CONTROL STEREO RECEIVER SA-GX303
Technics
POWER
START
J E
E STAND / ON PEMOTE
SPEAKERS PEQ/TONE
, BOR nar wes ros CI
[ ] L 1 1 11 |
в Lo ha lh UAL FRERT —
CC 9 Li Li I ]
me [a] e]
CENTER FREO/BASS — LEVEL/TREBLE
о О ©
‘ `
GT LEFT ит
To emphasize low-frequency sound
Set the loudness switch to “ON” position.
The loudness indicator will illuminate.
This feature is especially useful when listening to music at low
volume levels, as it enhances the low frequency sounds that are
usually lost.
Ml
UN
FM STEREO =
MAI crea eras vano emma emana тете МАХ
QUARTZ LOCK
E
- id
| ma 0 ern
Ca
—
CH
Loudness indicator
||
LOUDNESS
OFF/ON
©
To adjust the left/right sound balance
Adjust the balance control.
The left/right volume balance of the rear speaker systems cannot
be adjusted.
BALANCE
Ó
— 34 —
Recording
Have you completed the steps (on page 19) of
“Basic Operating Procedure” ?
source to be
recorded.
recordin
1 | y al ov | 2 Begin 3 audioNideo
© >
Technics
POWER
= ps LE ap = в ЕО —O
[ + 1 | ТЕ ‘888 = 88 =
У ; 4 er UE il Rs rot À
= m= я ERE: 088% TRE и
se
E
ESE: 4
(0 (22-я кино
mo Um 2% LA 43 wm SE WR
LOCA
DNA OO me:
5 Жо ов TU мах
rate , wr VOED
Ct STANCEY OM
Le,
DOES) | gas] me | чех [ree |
CENTER FREQ/BASS LEVEL/TREBLE .
PHONES 1 ven TAPE/DAT | | | OF AN BALANCE
Von 2 | LICHETOR | co TUNER PHONG | vo 15
O ~ ” ~ -
© O: O: OIGITAL cauto seco
Mr DU
1 L — |
Tape recording
To record on the tape deck or digital audio tape deck (DAT) con-
nected to the “TAPE/DAT” terminals.
Before recording, prepare the tape deck or DAT for recording
(recording level adjustment, etc.).
1 Select the audio/video source for recording. 3 Begin the audio/video source to be recorded.
2 Begin recording.
Follow your tape deck's or DAT's operating instructions.
To listen to the sound being recorded to the tape deck
Press the tape-monitor switch TAPE/DAT Tape indicator
while recording.
(The tape indicator will illuminate.)
QUARTZ LOCK Г /
CH + Г _
|
{
{ MHz El
=
“mg,
Follow your tape deck's or DAT's operating instructions for
availability and operation of the tape monitor function.
VCR (VCR 1) recording
Before recording, prepare the VCR for recording (recording level
adjustment, etc.).
Be sure to set the input selector on the VCR to the external input
position.
1 Select the video source for recording. 3 Begin the audio/video source to be recorded.
Then, select the audio source if it is different from the video
source as in simulcast broadcasting.
2 Begin recording.
Follow your VCR's operating instructions.
— 35 —
Eqit-Recording
Have you completed the steps (on page 19) of
“Basic Operating Procedure” ?
1 | Von 2 2 Begin recording
NO and playback
the tape.
Technics AV CONTROL STEREO RECEIVER 5A-GX303 \ \ а ю ©
POWER \ аист ano oe
ÉSTARDOT/ ON REMOTE Mu © TO WO 250 460 £30 %& Lk Dla EEE & 4
TRE me ay me С 5
E = | | | | L J -
VO Loro AE LOT \\ FANDOM PET TUNG mm DD ngs
= с |. | ©
we [r= [wr [5] || CJ \ ZI || EI
os 00 LEE SS meme
te | ||
Е и
Edit recording from VCR 2 to VCR 1
Before recording, prepare the VCR for recording (recording level
adjustment, etc.).
1 Press the “VCR 2” button. | 2 Begin recording on the VCR 1 and playback
(The "[2}” will be displayed on the VCR display.) the tape on the playback VCR 2.
Follow your VCR's operating instructions.
Concerning the Remote Control
Battery installation
Open the
cover.
Insert the
batteries. cover.
Close the
1 Open the cover.
Press gently and move the cover in the direction of the arrow.
2 Insert the batteries.
Use two UM-4 “AAA”, IEC RO3 (1.5 VW or equivalent batteries.
Be sure that the batteries are inserted so that their positive
(+) and negative (—) poiarities match the polarities indicated
in the compartment. Batteries installed incorrectly may leak
and cause damage.
Refer to “Use of batteries” for additional information.
3 Close the cover.
Use of batteries
Do not mix old and new batteries, or batteries of different types
(carbon and alkaline, etc.).
Always remove old, weak or worn-out batteries promptiy and
dispose of them properly.
The battery life is about one year.
Although the battery life varies depending on how often the device
is used, the batteries should be replaced about once every year on
the average.
The batteries should be replaced if commands from the remote
control transmitter do not operate the unit even when transmitter is
held close to the front panel.
Never subject batteries to excessive heat or flame; do not attempt
to disassemble them; and be sure they are not short-circuited.
If the remote control is not to be used for a long period of time,
remove the batteries and store them in a cool, dark place.
If a battery leaks, remove all batteries and dispose of them proper-
ly. Thoroughly clean the battery compartment before inserting new
batteries.
If the electrolyte comes into contact with skin or clothes, flush with
water immediately.
Keep batteries out of reach of children.
Do not use rechargeable (nickel-cadmium) type batteries.
Do not attempt to recharge alkaline or carbon batteries.
Operation notes
Aim the remote-control's transmission window toward the unit's
sensor. Avoid any obstacles.
= оО
60° —
1 6 meters
(20 ft.)
Use the remote contro! within a 60 angle and within 6 meters (20
ft.) from the unit.
Avoid dust
Be sure the transmission window and the unit's sensor are free
from dust. Excessive dust might affect its performance.
The operation may not be correct if direct sunlight or other strong
light source strikes the receiving sensor of this unit. If there is a pro-
blem, place the unit away from the light source.
The control pane! of the remote control may be covered by a clear
plastic protective sheet. This sheet may be removed it desired.
Remote Control Operation (Audio
For detailed information concerning operation steps, etc., please see
the appropriate page of the operating instructions for each unit.
a |
1 Set the
power of
each
component 2
TUNER |
_ to N A I -
CD
Y CH À +10
O CO na O
Receiver em bPLAY BESTOP JIPAUSE во ЕОВААЫ
LO se
= | ` SELECTOR
== e 4 SKIP_ bp VCR1 VCR 2
cru = — ( ) ( ) GD
о] О © — LI оо о
DECK
H PAUSE
(not included) e[ SS СЭ ее 5) ven C3
- FE SURROUND YREAR LEVELA
Compact disc player [all” = CI St
RE. FR
Cassette tape deck Sl 00 о © & es
(not included) tee ee mai < pLAY » MSTOR| PLAY MStoP
ll DE СООО Y VOLUME 4
fo | pT I
[| =) J]
1 REMOTE CONTROL TRANSMITTER N
AUDIO
RAK-SASOIPI
A
М
To switch each component’s power ON/OFF
Have you connected the power cords as indicated
on page 6 ?
1 Set the power of each component to ON. 3 Press the power switch.
(The power of each component will be switched OFF.)
2 Press the “TUNER” button. The "STANDBY" indicator (“STANDBY”) on the receiver will
illuminate, and the indicators of all other components will
switch OFF.
To restore power to all components, follow step 3 again.
To attenuate the volume level
Press the muting button. MUTING To resume to the previous volume level from the main unit, press
and hold the “PHONO” input selector for about 4 seconds.
(The unit will switch to the phono mode.)
The volume level is attenuated by approx., 20 dB (1/10).
(The muting indicator on the receiver will illuminate.)
Press once again to resume to the previous volume level.
(The muting indicator on the receiver will turn OFF.)
To adjust the volume level
Use the volume control. Y VOLUME 4
a
©
— 38 —
С | | TUNER TV VCR E
v — |eeccsh
EI
С) С TVACA С
» PLAY IESTOP BMPAUSE (iso) PROGRAM
SELECTOR |
td SKIP Mi VCR1 VCR2
OD « C8)
SURROUND WREAR LEVELA 5
0 J
DECK
2 [s HEC) 11 PAUSE
{7 oeex [J] vea CD)
+ Pr HFPAUSE| HARE FF
UCI
4 PLAY » BHSTOP| PPLAY STOP
MUTING ¥ VOLUME À
LJ
REMOTE CONTROL TRANSMITTER
AUDIO
RAK-Sa501P1
N—
02 0-
O~ Ow
Oe Je
de >
Oo Qe
|
Listening to radio broadcasts
Have you completed the steps (on pages 22 — 23)
of “Memory presettings” ? |
1 Press the “TUNER” button.
2 Select the desired “channel”.
To designate channels 1—9:
Press the appropriate (1 — 9) preset-tuning button.
To designate channels 10 — 30:
(M Press the button for the most significant digit (1, 2 or 3).
@ Press the button for the least significant digit (1—0)
within 2 seconds after pressing the first button.
If the interval between pressing the first button and pressing
the second button is more than about 2 seconds, the setting
may not be made correctly. If this happens, make the setting
once again.
Remote Control Operation (Audio)
(continued)
PROGRAM/
CONTINUE
CS
ua
- PLAY »
39
EEN
172 [e REC)
3 » PLAY (7) vec (7
STOP) »PLAY HIST
ELECTOR
VCR 2
D
©
MUTING
v VOLUME A
——
Listening to compact discs
For a Technics compact disc player with the proper remote-control
terminal or a remote-control sensor only.
Consult your dealer for details.
REMOTE CONTROL TRANSMITTER
AUDIO
RAK-SASOIPI
—
|
о
+
O
0
Sequential play
Sequential play refers to play of the first track of the first disc to the
last track of the last disc.
1 Press the “CD” button.
2 Set the program/continue button to the con-
tinuous mode.
(The program indicator of the compact disc player should be
OFF)
To stop play temporarily
3
Press the play button.
(Play will start.)
Press the pause button.
Press the play button to resume play.
To stop play
Press the stop button.
— 40 —
TUN
OO
|
7
5 ?
PROGRAM/
CONTINUE
О -
CH À
O
a
Mt SKIP del
1 2 3 4 Le
HOODOO |
8 8 Q
+10
TV/VCR
E
o
CONTINUE
SELECTOR
VCR 1 VCR2
cD
DECK
ul 1/2
J
- >»
o
a PLAY >
DECK
3
7 A)
Te
SÉ
11 PAUSE
ven
DIPAUSE | 4dREW De FF
Jo
HSTOP| » PLAY STOP
MUTING
JT
I
=
7
¥ VOLUME A
OC JC
REMOTE CONTROL TRANSMITTER
AUDIO
RAX-SABMPY
On
Je
Os
Oo
h\Y
0,
0e 0-
О- О»
Oo Qe
0° 0»
03909 0
Direct access play
To start sequential play from a specific disc and track. Play will
progress to the last track of the last disc.
Steps 3 and 4 are only applicable to a Technics multi-compact
disc player.
1
2
Press the “CD” button.
Set the program/continue button to the con-
tinuous mode.
(The program indicator of the compact disc player should be
OFF.)
Press the disc button.
Select the desired disc number.
If only the disc is selected, play of all tracks on that disc
(beginning from its first track) will begin.
5
— 44 —
Select the desired track number.
(Play will start from the selected track.)
Tracks 1-9: Press the appropriate
ton + — $ directly.
To select a two-digit track number over 10:
Press the & button to select the “tens” digit, and then one
ofthe 5 - & buttons to select the “units” digit.
To select track number such as 30:
Press the £9 button three times and then
numeric but-
0
O -
Remote Control Operation (Audio)
(continued)
J OO |
pococoda
PROGRAM > | 200006) 1 2 8 4 5
2 CONTINUE von со. ~~ 5 OO oO
CD TYNCR 5 à 8 à 8
e CONTE a
O 8
res Nf vor VOR GR 2
RE г (#858)
OS
3æ LÉ SE 6
CC.) DO. Repeat the
4 PLAY + BSTOP| PLAY
N ССС steps 3-5.
MUTING Y VOLUME à
CJC]
Listening to compact discs (continued)
Program play
The desired tracks from a desired disc can be programmed to play
in any desired sequence.
Steps 3 and 4 are only applicable to a Technics multi-compact disc
player.
1 Press the “CD” button.
2 Set the program/continue button to the pro-
gram mode.
(The program indicator of the compact disc player will
illuminate.)
Press the disc button.
4 Select the desired disc number.
Repeat steps 3—4 instead of steps 5—6 if selecting the disc
only.
5
Select the desired track number.
Tracks 1-9: Press the appropriate numeric but-
ton & — & directly.
To select a two-digit track number over 10:
Press the #8 button to select the “tens” digit, and then one
of the & — & buttons to select the “units” digit.
To select track number such as 30:
Press the £9 button three times and then &
Repeat steps 3—5 until the desired program
is completed.
Press the play button to start play.
To program additional selections during play, repeat steps 3,
4 and 5.
To clear the entire program
Press the stop button one time while programm-
ing or two times while in the program play mode.
WSTOP
+
— 42 —
head SKIP е | 0065) 0°
DO SEE
SJ |]
[es
TUNER TV” VCR co
DES ©
ооо
SOLAS
OO) e
+19
DELAY MSTOP IIPAUSE (BMS) hoor
O
“SELECTOR
CD
DECK
1/2 11 PAUSE
[REC]
СЭ же С) (J)
>> IIPAUSE | IREW MF
OJOS
4 PLAY » ESTOP| PPLAY MSTOP
MUTING Y VOLUME À
REMOTE CONTROL THANSMITTER
AUDIO
RAK-SASOIP!
Skip play
Press one of the skip buttons during play.
Press the skip button momentarily until the
desired track has been located.
SKIP Dl
Pickup skips forward.
led SKIP
Pickup skips backward.
During program play, the pickup skips forward or backward within
the programmed tracks.
— 43 —
Remote Control Operation (Audio
(continued)
B=
DECK
CI
TUNER TV CR
O
co
O
OOO
a
D&
OO
+10
| SELECT
SURROUND WRACAR LEVELA
[POWER
5 OC
8 7 8 8 0
O Qe ÓN
PPLAY MSTOP HPAUSE a) /
CEE) Ga
SE o 37
~{e Reg)
11 PAUSE
VCR (9
“REY РР
Cd
PAUSE
‘ОЙ
> PLAY MSTOP
MUTING
Y VOLUME à "LL
REMOTE CONTROL TRANSMITTER
AUDIO
RAK-SASOIP1
STOP
~~
Listening to tapes
For Technics tape decks with the proper remote-control terminal
only. Consult your dealer for details.
1 Only when using a double cassette deck
Select tape deck (1 or 2).
The remote-control indicator of the cassette deck is
changed over each time the button is pressed.
2 Press the appropriate playback button.
D>: For the “A”-side of the tape (side facing outward)
«: For the “B”-side of the tape
To search for the desired tune
Press one of the fast-forward/cue,
rewind/review buttons during playback. СЭ
During playback of side “A” (forward) (>):
<<: Press to review.
pp: Press to cue.
>>
5
For Technics tape decks with the “music select” functions, these
buttons can be used to select the desired tune during playback.
During playback of side “B” (reverse) (4):
<<: Press to cue.
pp: Press to review.
To fast-forward or rewind the tape
Press one of the fast-forward/cue,
rewind/review buttons while in the stop mode.
If the side “A” (forward) indicator is illuminated: >>
4: Press to rewind.
pp: Press to fast-forward.
If the side “B” (reverse) indicator is illuminated:
44€. Press to fast-forward.
PP: Press to rewind.
To stop playback temporarily
UB PAUSE
Press the pause button. | ) To resume playback, press the playback button corresponding to
ND the side of the tape being played.
To stop playback
P P y STOP
Press the stop button.
+
1 Select the 7 \ 5 Begin the sound
sound source to [e source to be
be recorded. TC vm co recorded.
OOO O
OOO
6 7 8 3 0
LL.
{A
AL
DECK
17
2 DECK
Y CH a +10
Nu
PPLAY MSTOP JIPAUSE GSD Carme |
$ (ООО) © ©
pta SKIP bel TEL ECTON, |
PX OS SS
NO JOSE
2 HH PAUSE
1 Den к® BI PAUSE
me! Г)
A
a PLAY =] ESTOR| » PLAY BESTOP
MUTING Y VOLUME à mm N STOP
REMOTE CONTAQL TRANSMITTER
AUDIO О)
AAK-SASCIPI
A
0
>
=
v
7 ь
© en
Recording on tape deck
For Technics tape decks with the proper remote-control terminal on-
ly. Consult your dealer for details.
3 Press the record button.
(The tape deck will be in the recording stand-by mode.)
Before recording, prepare the tape deck for recording (recording
level adjustment, etc.)
1 Select the sound source to be recorded.
2 Only when using a double cassette deck
Select tape deck (1 or 2).
4 Press the appropriate playback button to
begin the recording.
Pp: For the “A”-side of the tape
«€: For the "B”-side of the tape
5 Begin the sound source to be recorded.
To stop recording temporarily
Press the pause button.
NI PAUSE
To resume recording, press the playback button corresponding to
the side of the tape being recorded upon.
To stop recording
Press the stop button.
MSTOP
— 45 —
Remote Control Operation (Video)
Have you connected the VCR and TV as indicated
on pages 6—7 ?
This remote-control transmitter can control any Panasonic televi-
sion or VCR which is equipped with remote-control functions that
have been introduced since 1984.
When operating the TV and VCR, face the remote-control transmit-
ter toward the remote-control signal receptor of each unit.
For detailed information concerning TV or VCR operation, please
read the operating instructions for each unit carefully.
Watching TV broadcasts
4 (om
= =
Set the
TV/VIDEO mode
on the TV to
“VIDEO”.
с сс
; =
ONO OTS
A OO W]e
J
“Ry OSEA
SON
I PAUSE
VCR1 VCR2
SS
MUTING v VOLUME
A
UE IC
RAK-SASOI1P1
Press the “TV” button.
Facing toward the TV:
Press the power button.
(Power for TV will be switched ON.)
3 Press the “VCR” button.
Facing toward the VCR:
Press the power button.
(Power for VCR will be switched ON.)
5 set the TV/VIDEO mode on the TV to “VIDEO”.
REMOTE CONTROL TRANSMITTER
AUDIO
7
1 2 3 4 5
O OOOO
6 7 8 9 0
oO ooo
YCHA
DO
6 Facing toward the receiver:
Press the “VCR 1” (or “VCR 2”) button.
7 Facing toward the VCR:
Select the desired channel.
À When using the preset channel buttons.
Press two keys consecutively to tune to the
desired TV broadcast directly.
D When using the channel up/down buttons.
Press “W CH” or “CH 4” to select the
desired channel.
POWER
HH SKIP Mi
СЭ С) с
fu STOP PAUSE ESO Cone
(Ce
CR 1 2
SUARCUND YREAR LEVEL à
DE [esa]
(3 vex (0)
+ pr PAUSE id
JO
4 PLAY №, MSTOP| »
REM CONTROL TRANSMITTER
AUDIO
AAK-SASOIPI
Watching video tapes
1 Press the “TV” button.
2 Facing toward the TV:
Press the power button.
(Power for TV will be switched ON.)
3 Press the “VCR” button.
4 Facing toward the VCR:
Press the power button.
(Power for VCR will be switched ON.)
7
X
Set the
TV/VIDEO mode
on the TV to
“VIDEO”.
— S
Set the TV/VIDEO mode on the TV to “VIDEO”.
Facing toward the receiver:
Press the “VCR 1” (or VCR 2) button.
Facing toward the VCR:
Press the playback button.
(Playback will begin.)
To stop playback temporarily
Facing toward the VCR: UN PAUSE
Press the pause button.
Press again to start the playback
To stop playback
Facing toward the VCR:
Press the stop button.
STOP
x
— 47 —
Remote Control Operation (Video)
(continued)
[ =
SURROUND SC S e,
CC) ооо
N SSA!
Sm E
PPLAY STO? JIPAUSE BED roan
Dx minimo
| pra ЭГ со VCAH1 УСА 2
HENS ES
VREAR LEVELA \ A ma (| vom m <4REW PP FF
HL) Се {J
ООО
JC]
—
Watching video tapes connues
To fast-forward or rewind the video tape
Facing toward the VCR: <aREW PP FF
Press one of the fast-forward/rewind buttons (—)
while in the stop mode. №
dd REW: Press to rewind.
FF D>D: Press to fast-forward.
To activate the Dolby surround effect
Press the Dolby surround ON/OFF button. SURROUND
(The Dolby surround indicator on the receiver will illuminate.) | |
©
To adjust the rear volume level
Adjust the volume level of the rear speakers as VREARLEVELA
desired.
The volume level of the rear speakers will be displayed on the rear NN
level indicator.
a
fe VER со
— Coe © 1 2 345
1 = == POS
OOOO & à & & &
YCHA
OO
© BAAS 1
»PLAY MSTO? UEPAUSE ESO co
SELECTOR
Hd SKIP bel VCR1 VCR 2
( } CD
SURROUND WREAR LEVELA —= RES]
OIC) OJ
DESK [e REC] H PAUSE
) (3 ex (| ver
+ > DIPAUSE| +CREYY De FF
OO CO
4 PLAY > MSTCS| PPLAY MSTCP
у
7
o
MUTING V VOLUME à N
REMOTE CONTROL TRANSMITTER
AUDIO
RAK-SASOIPI H PAUSE
STOP
Ра
и
``.
‘Recording of TV broadcasts
Before recording, prepare the VCR for recording.
(recording level adjustment, etc.).
Be sure to set the input selector on the VCR to the tuner position.
1 Press the “VCR” button. 3 Facing toward the VCR:
Select the desired channel.
2 Facing toward the VCR: 4 Facing toward the VCR:
Press the power button. Press the record buttons simultaneously.
(Recording will begin.)
To stop recording temporarily
Facing toward the VCR: UN PAUSE
Press the pause button. |
Press again to start the recording. №
To stop recording
Facing toward the VCR: STOP
Press the stop button. | |
©
Technical Specifications wer
ll AMPLIFIER SECTION
Rated minimum sine wave
RMS power output
20 Hz~20 kHz both channels driven
0.05% total harmonic distortion
85 W per channel (8 Q)
1 kHz continuous power output
both channels driven
0.05% total harmonic distortion
87 W per channel (8 Q)
Total harmonic distortion |
rated power at 20 Hz—20 kHz 0.05% (8 Q)
half power at 1 kHz 0.03% (8 ©)
Dynamic headroom 1.2 dB (8 Q)
SMPTE intermodulation distortion 0.3% (8 Q)
Frequency response
PHONO RIAA standard curve +0.8 dB
CD, VCR 1, VCR 2, TAPE 7 Hz—70 kHz, £3 dB
Input sensitivity
PHONO 0.4 mV (3 mV, IHF '66)
CD, VCR 1, VCR 2, TAPE 27 mV (200 mV, IHF 766)
SIN (IHF, A)
PHONO 70 dB (80 dB, IHF ’66)
CD, VCR 1, VCR 2, TAPE 70 dB (90 dB, IHF '66)
Phono maximum input voltage 160 mV (IHF '66)
Input impedance
PHONO 47 КО
CD, VCR 1, VCR 2, TAPE 22 kQ
Tone controls :
BASS 50 Hz, +10~-10 dB
TREBLE 20 kHz, +10--10 dB
4 band parametric equalizer +10——10 dB
Loudness control (volume at — 30 dB) 50 Hz, +9 dB
Low frequency damping factor 20 (8 ©)
Load impedance
AorB 8 Q
A and B 80
E SURROUND AMPLIFIER SECTION
Power output (Rear) 1 kHz, 10 W (8 9)
(T.H.D. 0.8 %)
El FM TUNER SECTION
Frequency range 87.9~107.9 MHz
Sensitivity 11.2 dBf (2 pV, IHF '58)
50 dB quieting sensitivity
MONO 20.2 dBf (5.6 uV, IHF '58)
STEREO 40.2 dBf (56 pV, IHF ’58)
Total harmonic distortion
MONO 0.2%
STEREO 0.3%
S/N
MONO 75 dB
STEREO 70 dB
Freguency response 20 Hz~15 kHz, +1 dB, —2 dB
Alternate channel selectivity 65 dB
Capture ratio 1.0dB
Image rejection at 98 MHz 45 dB
IF rejection at 98 MHz 80 dB
Spurious response rejection at 98 MHz 75 dB
AM suppression 50 dB
Stereo separation
1 kHz 40 dB
10 kHz 30 dB
Carrier leak
19 kHz — 35 dB
38 kHz | — 50 dB
Antenna terminals 300 (balanced)
75 Q (unbalanced)
Ш AM TUNER SECTION
Frequency range 530~1720 kHz
Sensitivity 20 MY, 330 HY/M
Selectivity 55 dB
image rejection at 1000 kHz 40 dB
IF rejection at 1000 kHz 60 dB
NM VIDEO SECTION
Output voltage at 1 V input (unbalanced) 1+0.1 Vp-p
Maximum input voltage 1.6 Vp-p
Input/output impedance 75 © (unbalanced)
Ш GENERAL
Power consumption
Power supply
Dimensions (W x H x D)
275 W, 370 VA
AC 120V, 60Hz
430 x 134 x 305 mm
(16-15/16" x 5-9/32" x 12")
Weight 8.5 kg (18.7 Ib.)
Notes:
1. Specifications are subject to change without notice. Weight
and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Troubleshooting Guide
Before requesting service for this unit, check the chart below
for a possible cause of the problem you are experiencing. Some
simple checks or a minor adjustment on your part may eliminate.
the problem and restore proper operation.
— 50 —
If you are in doubt about some of the check points, or if the
remedies indicated in the chart do not solve the problem, refer to
the directory of authorized service centers (enclosed with this unit)
to locate a convenient service center, or consult your Technics
dealer for instructions.
(in U.S.A. consult MSC Authorized Servicenters for detailed
instructions.)
| Problem
Probable cause(s)
_
Suggested remedy
While listening to FM broadcasts
An unusual hissing noise is
heard when listening to the
broadcast in stereo, but not
heard when listening
monaurally.
A slight noise may be heard because the method
used for modulation of FM stereo broadcasts is
different than that used for monaural broadcasts.
Noise is excessive in both
stereo and monaural
broadcasts.
Poor location and/or direction of the antenna.
® Try reducing the treble sound by using the frequency
level/treble control.
e Set the FM mode selector to the monaural position.
(Note that the broadcast will then be heard as
monaural sound.)
| e Try changing the location, height and/or direction of
the antenna.
Transmitting station is too far away.
e |f an indoor antenna is being used, change to an
outdoor antenna.
e Try using an antenna with more elements.
The FM stereo indicator or
the quartz lock indicator
flickers, without completely
illuminating.
Poor location and/or direction of the antenna.
Transmitting station is too far away.
Excessive distortion in the
sound of stereo broadcasts:
Nearby building or mountain.
[Multipath distortion is being caused by the mutual
interference of broadcast signals received directly
from the transmitting station (direct waves) and
signals being reflected from nearby buildings or
mountains (reflected waves).]
* Try changing the location, height and/or direction of
the antenna.
e |f an indoor antenna is being used, change to an
outdoor antenna.
e Try using an antenna with “re « larnents.
While listening to AM broadcasts
An unusual “beat” sound is
heard.
Unit is being used at the same time as the
television set.
e Turn off the television set. or use this unit farther
away from it.
Interference from adjacent broadcast signal.
A low-pitched “hum” sound
is heard when the
broadcast is tuned.
The AM loop antenna connection wires are too
| close to the power cord.
e Try reducing the treble sound by using the frequency
levei/trebie control. |
e Place the antenna connection wires and the power
cord farther apart.
The power supply frequency from the power cord
is modulated and heard from the speakers.
A strange hissing noise is
produced continuously or
intermittently.
o Install a special outdoor antenna.
Caused by the “discharge phenomenon” and the
“oscillation phenomenon’ of electric appliances
(such as fluorescent lights, TV, small series-type
motors, rectification equipment, etc.).
» Try placing this unit farther away from such
equipment.
¢ Install noise-prevention equipment on this unit or on
the electric appliance.
Problems noted at all times
No sound is heard when the
power is switched ON.
The power cord plug is not completely inserted.
Connections are incomplete or incorrect to the
speaker systems, etc.
The incorrect input selector has been pressed.
e Confirm that the power cord plug is connected
completely.
| *e Check to be sure that all connection wires are
| correctly connected.
1 —
e Check to be sure that the correct selector is
pressed.
The speaker selectors are incorrectly set to the
“OFF” position.
Sound stops during a
performance, or no sound
is heard when the power is
switched ON,
| Remote-control transmitter
does not function.
e Set to the “ON” position.
The protection circuitry has functioned because
the positive and negative speaker connection
wires are “shorted” or speaker systems with an
impedance less than the indicated rated
| impedance of this unit are used.
e Switch off the power, and, after determining and
correcting the cause, switch on the power once
again.
* Use a speaker system of the proper impedance
rating.
Batteries are incorrectly installed.
e Insert the batteries so that the positive (+) and
negative (—) polarities are correct.
Product service
Do not attempt to remove the cover(s) or repair the unit yourself.
Refer servicing to qualified personnel only.
Product information
For product service, product information or assistance with pro-
duct operation, refer to the servicenter directory.
AL Comm bat Ae А? CA AR] ~
Index
Audio input selector/frequency display
(INPUT SELECTOR/FREQUENCY)...................... 14
Balance control (BALANCE) 0000000 11, 34
Band indicators (AM, FM)... . 1120, 14
Band selectors ........... As 13, 21
Center frequency select/bass control
(CENTER FREQ/BASS) ......................... 12, 26, 28
Channel display ea 14
- Channel up/down buttons (W CH A) ................ 18, 46, 49
Deck 1/Deck 2 stector (DECK 4/2). ................. 16, 44, 45
Disc button (DISC) A a a La 17, 41, 42
Display mode select button
(-DISPLAY MODE, -DEMO)......................... 11,27
Dolby surround. ....... aaa 32
Dolby surround indicator. .............................. 14, 33
Dolby surround input balance control
(SURROUND INPUT BALANCE) .................... 11, 33
Dolby surround ON/OFF button (SURROUND) .... 12, 17, 33, 48
Equalization preset buttons (MANUAL PRESET) ......... 11, 30
Fast-forward/cue/rewind/review buttons (<<, PD) ...... 16, 44
Fast-forward/rewind buttons (dd REW, DD» FF) ........ 18, 48
Fine mode indicator (FINE). .......... aa 15, 29
Fine mode select button (FINE). ........................ 12, 29
Fixed preset button (FIXED PRESET) ................... 11, 31
FM mode selector (FM MODE). ..................... 13, 21, 24
FM stereo indicator (STEREO)... .......................... 14
Frequency level/treble control (LEVEL/TREBLE)...... 12, 26, 28
Function selector buttons
(TUNER, TV, VCR, CD) ............... 16, 38—42, 46, 47, 49
Headphones jack (PHONES) .......................... 11, 20
Input selector buttons ............ 2.2. 11,19
Loudness indicator (LOUDNESS)....................... 14, 34
Loudness switch (LOUDNESS) ......................... 11, 34
Manual/fixed preset indicators (1 23 FLAT) ............. 15, 31
Memory button (MEMORY) ......................... 13, 22, 23
Memory indicator (MEMORY). ............. oot. 14
Memory scan button (MEMORY SCAN) . ................ 13, 24
Memory scan indicator (M. SCAN) ............ 14
Muting button (MUTING)................. PE 17, 38
Muting indicator (MUTING) ................................ 14
Numeric buttons (1-0, +10)... ................... 17, 41, 42
Parametric EQ band select buttons ..................... 11, 28
Parametric EQ mode indicator (P. EQ MODE). ........... 15, 28
Parametric EQ system .... ea 25
Parametric EQ system center frequency display .......... 15, 29
Parametric EQ system memory button (MEMORY)... ..... 11, 30
Parametric EQ system memory indicator (M)............. 15, 30
Parametric EQ system off indicator (OFF) ............... 15, 28
Parametric EQ system ON/OFF button (P. EQ SYS)....... 12, 28
Parametric EQ system operation select indicators
(MANUALIFIXED)........... i, 15
Parametric EQ/tone mode select button
(P. EQITONE)............ ie, 12, 26, 28
Pause button (EN PAUSE) (for cassette deck) ......... 16, 44, 45
Pause button (HE PAUSE) (for compact disc player). ...... 17, 40
Pause button (IB PAUSE) (for VCR) ..................... 18, 47
Playback button (» PLAY) ........... ccc. 18, 47
Playback buttons (« PLAY) ........ ................ 16, 44
Play button (» PLAY)... ........................... 17, 40, 42
Power ‘“& STANDBY/ON” switch
(POWER, d STANDBYI/ON)........... 2.2... 13, 19
Power switch (POWER). ............... .. .............. 16, 38
Preset channel buttons (1-0) ....................... 18, 46, 49
Preset-tuning buttons (1—0) (30 CHANNEL
RANDOM PRESET TUNING).............. 13, 16, 22, 24, 39
Program/continue button (PROGRAM/CONTINUE) ... 17, 40—42
Quartz-lock indicator (QUARTZ LOCK) ..................... 14
Rear level indicator. ................ ea 14
Rear speaker level adjustment buttons
(REAR LEVEL) .............. iin... 12, 17, 33, 48
Record button (6 REC). .................... .......... 16, 45
Record buttons (@ REC)... ......... ................... 18, 49
Remote-control signal receptor (REMOTE SENSOR)... . .. 13, 37
Selector buttons (SELECTOR) ...................... 18, 46, 47
Skip buttons (td SKIP I). 17,43
Slope changeover button [SLOPE(Q)}................... 12, 29
Speaker selectors (SPEAKERS) ........................ 11, 19
Spectrum analysis/parametric EQ level display
(SPECTRUM ANALYZER/PARAMETRIC EQ). ............ 14
“STANDBY” indicator (STANDBY) ............. ............ 13
Stop button (IN STOP) (for cassette deck) ............ 16, 44, 45
Stop button (IN STOP) (for compact disc player). ......... 17,40
Stop button (ll STOP) (for VCR) ........................ 18, 47
Tape indicator (TAPE) ............... iii. 14
Tape-monitor switch (TAPE MONITOR) ................. 11, 19
Tone mode indicator (TONEMODE) .................... 15, 26
Tuning control (TUNING) .......................... 13, 21—23
Tuning-mode selector/indicator (TUNING MODE). . . .. 13, 21—23
VCR display (VCR) .....................2200m00 000. 14, 36
Volume control (VOLUME) ...................... 11, 17, 19, 38
Panasonic Company, Division of
Matsushita Electric Corporation of America
One Panasonic Way
Secaucus, New Jersey 07094
Printed in Japan
Panasonic Sales Company, Division of
Matsushita Electric of Puerto Rico, Inc.
San Gabriel Industrial Park
65TH Infantry Ave. KM. 9.5
Carolina, P.R. 00630
Matsushita Electric of Canada Limited
5770 Ambler Drive, Mississauga,
Ontario L4W 2T3
RQT1149-P
H0491A0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement