superbay bi series - Hubbell Industrial

SUPERBAY
BI SERIES
Cat. #
Approvals
Job
Type
14” ALUMINUM
REFLECTOR
APPLICATIONS
• Narrow, medium and wide lighting distributions for applications flexibility.
SPECIFICATIONS
•Anodal® finished 14” diameter spun aluminum reflector.
• Field adjustable brackets provide narrow, medium and wide lighting distributions.
• Rugged, two-piece, die cast aluminum ballast housing with corrosionresistant Lektrocote® white finish.
• Unit Pack available, see table below (lamp included in Unit Pack).
LISTINGS
• Up to 55°C ambient, suitable for damp location, minimum 90°C supply conductors.
E
F
C
A
D
B
A
B C D EF
SLICK-ON®223/16”-247/16”141/4”91/2”97/16”91/2”2”
564-621 mm 362 mm 241 mm 240 mm 241 mm 51 mm
QUICK-ON®215/16”-239/16”141/4”85/8”97/16”97/16”11/8”
541-598 mm 362 mm 219 mm 240 mm 240 mm 29 mm
ORDERING INFORMATION
ORDERING EXAMPLE: BL-400P8-BI-WH
BL
-
Series
Wattage
Source
SERIES
BL Superbay Series
WATTAGE
175 175 watt Pulse Start MH only
250 250 watt MH, Pulse Start MH or HPS
320 320 watt Pulse Start MH only
400 400 watt Pulse Start MH or HPS
Voltage
BI
-
Optics
Color
SOURCE
S
High Pressure Sodium
P
Pulse Start Metal Halide
VOLTAGE
5480V
8Quad-Tap® - 120/208/240/277V
OPTICS
BI
14” Spun Aluminum Highbay Reflector with uplight
COLOR
WH White (standard)
GR Gray (optional)
NOTE: Energy Saving Linear Reactor Pulse Start ballast available, consult factory (277V only).
NOTE: Bottom enclosures are required unless lamps designated as “suitable for open use” are used.
NOTE: Options must be added as suffix to Catalog Number. Accessories must be ordered separately.
ACCESSORY
Order separately
BOTTOM ENCLOSURE
BL-LR-14 Bottom Enclosure
BI UNIT PACKS
MATERIAL
MATERIAL DESCRIPTION
WATTAGE
VOLTAGE
LAMP BASE
LAMP INCLUDED
BL-400P8-BC-WH-EX-UPL
BL-400P8-BC-WH-UPL
400
400
Quad-Tap
Quad-Tap
Exclusionary
Mogul
Lamp Included
Lamp Included
METAL HALIDE PULSE START
BL400P8BCEXUPL
BL400P8BCWHUPL
SHEET # BLBI-SPEC12/15
ORDERING INFORMATION
OPTIONS FOR SUPERBAY SERIES
Factory installed — order with fixture by adding suffix.
PLUGS ARE TWIST-LOCK® TYPE AS MANUFACTURED BY HUBBELL WIRING DEVICES.
Suffix
Description
-CFB
Charcoal filter breather
-C4HL
4’ Cord, Hook/Loop w/ Quick-On® Hanger - SO cord wired thru
hook
-C6HL
6’ Cord, Hook/Loop w/ Quick-On® Hanger - SO cord wired thru
hook
-C8HL
8’ Cord, Hook/Loop w/ Quick-On® Hanger - SO cord wired thru
hook
-C10HL
10’ Cord, Hook/Loop w/ Quick-On® Hanger - SO cord wired thru
hook
-C12HL
12’ Cord, Hook/Loop w/ Quick-On® Hanger - SO cord wired thru
hook
CORD, HOOK/LOOP & 20A PLUG W/ QUICK-ON® HANGER SO CORD W/ PLUG WIRED THRU HOOK
LENGTH X= 120V 208V 240V 277V 480V 347V
-C4HLP (X)4’ 1
2
3
4
5
C
-C6HLP (X)6’ 1
2
3
4
5
C
-C8HLP (X)8’
1
2
3
4
5
C
-C10HLP (X)10’ 1
2
3
4
5
C
-C12HLP (X)12’ 1
2
3
4
5
C
Suffix
Description
-C4HLPSO1-15A4’ Cord, Hook/Loop & 15A 120V Plug w/ Slick-On® Hanger - SO cord w/ plug wired thru hook
-C6HLPSO1-15A6’ Cord, Hook/Loop & 15A 120V Plug w/ Slick-On® Hanger - SO cord w/ plug wired thru hook
-C8HLPSO1-15A8’ Cord, Hook/Loop & 15A 120V Plug w/ Slick-On® Hanger - SO cord w/ plug wired thru hook
-C10HLPSO1-15A10’ Cord, Hook/Loop & 15A 120V Plug w/ Slick-On® Hanger - SO cord w/ plug wired thru hook
-C12HLPSO1-15A12’ Cord, Hook/Loop & 15A 120V Plug w/ Slick-On® Hanger - SO cord w/ plug wired thru hook
-C4HLPSO4-15A4’ Cord, Hook/Loop & 15A 277V Plug w/ Slick-On® Hanger - SO cord w/ plug wired thru hook
-C6HLPSO4-15A6’ Cord, Hook/Loop & 15A 277V Plug w/ Slick-On® Hanger - SO cord w/ plug wired thru hook
-C8HLPSO4-15A8’ Cord, Hook/Loop & 15A 277V Plug w/ Slick-On® Hanger - SO cord w/ plug wired thru hook
-C10HLPSO4-15A10’ Cord, Hook/Loop & 15A 277V Plug w/ Slick-On® Hanger - SO cord w/ plug wired thru hook
-C12HLPSO4-15A12’ Cord, Hook/Loop & 15A 277V Plug w/ Slick-On® Hanger - SO cord w/ plug wired thru hook
CORD, HOOK/LOOP & 15A PLUG W/ QUICK-ON® HANGER SO CORD W/ PLUG WIRED THRU HOOK
LENGTH X= 120V 208V 240V 277V 480V 347V
-C4HLPX-15A 4’ 1
2
3
4
5
C
-C6HLPX-15A 6’ 1
2
3
4
5
C
-C8HLPX-15A 8’ 1
2
3
4
5
C
-C10HLPX-15A 10’ 1
2
3
4
5
C
-C12HLPX-15A 12’ 1
2
3
4
5
C
CORD, HOOK/LOOP & 20A PLUG W/ SLICK-ON® HANGER SINGLE FUSE (incl.) SO CORD W/ PLUG WIRED THRU HOOK
LENGTH X3= 120V277V 347V
-C4HLPSOF (X3) 4’ 1
4
C
-C6HLPSOF (X3) 6’ 1
4
C
-C8HLPSOF (X3) 8’ 1
4
C
-C10HLPSOF (X3) 10’ 1
4
C
-C12HLPSOF (X3) 12’ 1
4
C
-C4HLP1-15A -C6HLP1-15A -C8HLP1-15A -C10HLP1-15A -C12HLP1-15A -C4HLP4-15A -C6HLP4-15A -C8HLP4-15A -C10HLP4-15A -C12HLP4-15A CORD, HOOK/LOOP & 20A PLUG W/ SLICK-ON® HANGER DOUBLE FUSE (incl.) SO CORD W/ PLUG WIRED THRU HOOK
LENGTH X4= 208V240V 480V
-C4HLPSOFF (X4) 4’ 2
3
5
-C6HLPSOFF (X4) 6’ 2
3
5
-C8HLPSOFF (X4) 8’ 2
3
5
-C10HLPSOFF (X4) 10’ 2
3
5
-C12HLPSOFF (X4) 12’ 2
3
5
4’ Cord, Hook/Loop & 15A 120V Plug w/ Quick-On® Hanger SO cord w/ plug wired thru hook
6’ Cord, Hook/Loop & 15A 120V Plug w/ Quick-On® Hanger SO cord w/ plug wired thru hook
8’ Cord, Hook/Loop & 15A 120V Plug w/ Quick-On® Hanger SO cord w/ plug wired thru hook
10’ Cord, Hook/Loop & 15A 120V Plug w/ Quick-On® Hanger SO cord w/ plug wired thru hook
12’ Cord, Hook/Loop & 15A 120V Plug w/ Quick-On® Hanger SO cord w/ plug wired thru hook
4’ Cord, Hook/Loop & 15A 277V Plug w/ Quick-On® Hanger SO cord w/ plug wired thru hook
6’ Cord, Hook/Loop & 15A 277V Plug w/ Quick-On® Hanger SO cord w/ plug wired thru hook
8’ Cord, Hook/Loop & 15A 277V Plug w/ Quick-On® Hanger SO cord w/ plug wired thru hook
10’ Cord, Hook/Loop & 15A 277V Plug w/ Quick-On® Hanger SO cord w/ plug wired thru hook
12’ Cord, Hook/Loop & 15A 277V Plug w/ Quick-On® Hanger SO cord w/ plug wired thru hook
-C4HLSO
4’ Cord & Hook/Loop w/ Slick-On® Hanger - SO cord wired thru hook
-C6HLSO
6’ Cord & Hook/Loop w/ Slick-On® Hanger - SO cord wired thru hook
-C8HLSO
8’ Cord & Hook/Loop w/ Slick-On® Hanger - SO cord wired thru hook
-C10HLSO
10’ Cord & Hook/Loop w/ Slick-On® Hanger - SO cord wired thru hook
-C12HLSO
12’ Cord & Hook/Loop w/ Slick-On® Hanger - SO cord wired thru hook
CORD, HOOK/LOOP & 20A PLUG W/ SLICK-ON® HANGER SO CORD W/ PLUG WIRED THRU HOOK
LENGTH X= 120V 208V 240V 277V 480V 347V
-C4HLPSO (X) 4’ 1
2
3
4
5
C
-C6HLPSO (X) 6’ 1
2
3
4
5
C
-C8HLPSO (X) 8’ 1
2
3
4
5
C
-C10HLPSO (X) 10’ 1
2
3
4
5
C
-C12HLPSO (X) 12’ 1
2
3
4
5
C
SHEET # BLBI-SPEC12/15
Suffix
Description
CORD, HOOK/LOOP W/ SLICK-ON® HANGER SINGLE FUSE (incl.) SO CORD W/ PLUG WIRED THRU HOOK
LENGTH X2= 120V277V 347V
-C4HLSOF (X2) 4’ 1
4
C
-C6HLSOF (X2) 6’ 1
4
C
-C8HLSOF (X2) 8’ 1
4
C
-C10HLSOF (X2) 10’ 1
4
C
-C12HLSOF (X2) 12’ 1
4
C
CORD, HOOK/LOOP W/ SLICK-ON® HANGER DOUBLE FUSE (incl.) SO CORD W/ PLUG WIRED THRU HOOK
LENGTH X3= 208V240V 480V
-C4HLSOFF (X3) 4’ 2
3
5
-C6HLSOFF (X3) 6’ 2
3
5
-C8HLSOFF (X3) 8’ 2
3
5
-C10HLSOFF (X3) 10’ 2
3
5
-C12HLSOFF (X3) 12’ 2
3
5
-GR
Gray Lektrocote® Finish on housing; replace -WH in catalog
number
-LRI 1
Lower Luminaire Retainer - a snap-in cable on housing secures reflector to ballast housing
-P
High Strength Polycarbonate Refractor
-QSS
Quartz Standby System - ON when power is restored, OFF
when HID lamp restrikes. Wattage of quartz lamp (included)
limited to 250w max for 750w and higher HID fixtures and 150w max for lower wattage HID fixtures.
Uses 120V DC bayonet base lamp. Factory wired.
-QST
Quartz Standby with Time Delay - ON when power is restored,
OFF when HID lamp restrikes and is warmed up. Wattage
not to exceed wattage of HID lamp (250W max. recommended).
Uses 120V DC bayonet base lamp. Factory wired.
-SOSlick-On® Thru Wire Outlet Box for 3/4” pendant or 1/2” or 3/4” side entry conduit
SLICK-ON® THRU WIRE OUTLET BOX, SINGLE FUSE (incl.)
SuffixDescription
for 3/4” pendant or side entry conduit
X3=120V 277V 347V
-SOF (X3) 1
4
F
SLICK-ON® THRU WIRE OUTLET BOX, DOUBLE FUSE (incl.)
for 3/4” pendant or side entry conduit (not for Canada)
X4=208V 240V 480V
-SOFF (X4) 2
3
5
-TRI(X)
Top Luminaire Retainer - chain secures ballast housing
to structure when additional safety precautions are required.
Shipped in housing carton. Specify length (X), recommended maximum slack is 3”
1 Luminaire retainers/safety cables reduce risk of equipment falling
NOTE: For specific applications, bottom enclosures may be required. For more information,
please see specific lamp manufacturers’ data and the NEMA white paper “Best Practices for
Metal Halide Lighting Systems” posted on the NEMA web site (www.nema.org).
WARNING: Improper selection, installation, operation, servicing, removal, and disposal of
lighting products may create serious hazardous including fires, explosions, shock, burns,
cuts, impaired vision, falling objects, and environmental contamination. Reduce risks by
using the guidance of licensed professionals throughout the product life cycle, and following
individual product, component, and accessory safety instructions and labels.
We offer this in the interest of safety for our customers, who may not be aware of the potentially high risk involved in the misuse of these products.
SHEET # BLBI-SPEC12/15
ORDERING INFORMATION
ACCESSORIES
MOUNTING ACCESSORIES
Catalog # Description
B-LLR 1
Lower Luminaire Retainer - 2’ cable secures reflector to ballast housing
B-TLR(6) 1
6’ Top Luminaire Retainer - chain secures ballast housing to structure when additional safety precautions are required
B-TLR(10) 1
10’ Top Luminaire Retainer - chain secures ballast housing to structure when additional safety precautions are required
B-TLR(12) 1
12’ Top Luminaire Retainer - chain secures ballast housing to structure when additional safety precautions are required
B-TLR(16) 1
16’ Top Luminaire Retainer - chain secures ballast housing to structure when additional safety precautions are required
BL-LR-142
Tempered Glass Lens - thermal shock & impact resistant; gasketed on corrosion-resistant steel lens ring (not dust tight) required for 175, 250, 320, 350 & 400 watt metal halide
luminaires; for BI and BC reflector only
BL-QOQuick-On 3/4” pendant mount
BL-SO
Slick-On Thru Wire Outlet Box for 3/4” pendant or 3/4, 1/2 side entry conduit
BL-SOF
Slick-On Single Fusing (fuse not incl.) thru wire outlet box for 3/4” pendant or 3/4, 1/2 side entry conduit mount with single fuse holder
BL-SOFF
Slick-On Double Fusing (fuses not incl.) thru wire outlet box for 3/4” pendant or 3/4, 1/2 side entry conduit mount with double fuse holder (not for Canada)
WG-14
14” Wireguard - corrosion resistant, welded steel w/ center lamp access
Catalog #
Description
BLA-C4HLP-1
4’ Cord, Hook/Loop and 120V 20A Twist-Lock® Plug
BLA-C4HLP-4
4’ Cord, Hook/Loop and 277V 20A Twist-Lock® Plug
BLA-C4HLP1-15A 4’ Cord, Hook/Loop and 120V 15A Twist-Lock® Plug
BLA-C4HLP4-15A 4’ Cord, Hook/Loop and 277V 15A Twist-Lock® Plug
HOOK/LOOP 1
Hook - cast aluminum 3/4” NPS male; includes safety screw;
converts to Loop with strap included
H3/4AL3/4 1
Swivel Aligner - complete with box for thru wiring; all hubs tapped for 3/4” conduit - 25° swivel
(order separately)
PLUGS ARE TWIST-LOCK® TYPE AS MANUFACTURED BY HUBBELL WIRING DEVICES.
(order separately)
1 CSA certified.
2 Cord, Hook/Loop and Plug must be added to fixture as option, example: -C2HLP4.
3 Cord, Hook/Loop and Dead Front Plug must be added to fixture as option, example:
-DFP4.
NOTE: Cord used with above accessories is 16/3 SOWA 105°C NEMA configurations.
1 Luminaire retainers/safety cables reduce risk of equipment falling.
2 Bottom enclosures are required unless lamps designated as “suitable for open use” are
used.
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
Hubbell Industrial Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • phone: 864-678-1000
For more information visit our web site: www.hubbell-ltg.com
Copyright © 2011 HUBBELL LIGHTING All Rights Reserved BLBI-SPEC12/15 Printed in USA
Download PDF
Similar pages