47A21 SERIES
™
USER GUIDE
PROHEAT PremieR 2X
Important Safety Instructions
Read all instructions before using your DEEP CLEANER.
When using an electrical appliance, basic precautions should be observed, including the following:
WARNING
To reduce the risk of fire,
electric shock, or injury:
»Connect to a properly grounded
outlet only. See grounding
instructions. Do not modify the
3-prong grounded plug.
»Do not leave appliance when it is
plugged in. Unplug from outlet when
not in use and before servicing.
»Use indoors only.
»Do not allow to be used as a toy.
Close attention is necessary when
used by or near children.
»Do not use for any purpose other
than described in this User’s
Guide. Use only manufacturer’s
recommended attachments.
»Do not use with damaged cord
or plug. If appliance is not
working as it should, or has been
dropped, damaged, left outdoors,
or dropped into water, have it
repaired at an authorized
service center.
»Always install float before any wet
pick-up operation.
»Do not pull or carry by cord, use
cord as a handle, close a door on
cord, or pull cord around sharp
edges or corners. Do not run
appliance over cord. Keep cord
away from heated surfaces.
»Do not unplug by pulling on
cord. To unplug, grasp the plug,
not the cord.
»Do not handle plug or appliance
with wet hands.
»Do not put any object into openings. Do not use with any opening
blocked; keep openings free of
dust, lint, hair, and anything that
may reduce air flow.
»Keep hair, loose clothing, fingers,
and all parts of body away from
openings and moving parts.
»Turn off all controls before plugging or unplugging appliance.
»Use extra care when cleaning
on stairs.
»Do not use to pick up flammable
or combustible materials (lighter
fluid, gasoline, kerosene, etc.)
or use in areas where they may
be present.
»Do not use appliance in an
enclosed space filled with vapors
given off by oil base paint, paint
thinner, some moth proofing
substances, flammable dust,
or other explosive or toxic vapors.
»Do not use to pick up toxic
material (chlorine bleach,
ammonia, drain cleaner, etc.).
»Do not pick up anything that
is burning or smoking, such as
cigarettes, matches, or hot ashes.
»Use only BISSELL cleaning
products intended for use
with this appliance to prevent
internal component damage.
See the Cleaning Fluid section
of this guide.
»Unplug before connecting
TurboBrush Tool.
»Do not immerse. Use only on
surfaces moistened by the
cleaning process.
»Keep appliance on a level surface.
»Do not carry the appliance while
in use.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.
WARNING
Improper connection of the equipment-grounding conductor can
result in a risk of electrical shock. Check with a qualified electrician
or service person if you aren’t sure if the outlet is properly grounded.
DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper
outlet installed by a qualified electrician. This appliance is designed
for use on a nominal 120-volt circuit, and has a grounding attachment
plug that looks like the plug in the illustration. Make certain that the
appliance is connected to an outlet having the same configuration as
the plug. No plug adapter should be used with this appliance.
2
www.bissell.com
800.237.7691
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded wiring system. If it
should malfunction or break down, grounding provides a safe path
of least resistance for electrical current, reducing the risk of electrical
shock. The cord for this
Grounded
appliance has an equipment-grounding
Outlets
conductor and a grounding plug. It must
only be plugged into an outlet that is
properly installed and grounded in
accordance with all local codes and ordinances.
Grounding Pin
Quick Start Guide
Assembly
1. Slide upper handle onto machine base
2. Screw 2 screws into the marked holes
3. Place upper hose rack onto back of
upper handle, and secure with screw
4. Wrap power cord to the left and flex hose
to the right of the upper hose rack
5. Attach tool to hose grip
Before you begin cleaning
1. Move furniture to another area if cleaning an
entire room
2. Remove large dirt and debris from carpet
3. Pre-treat spots & stains and heavy traffic
areas (optional)
4. Fill the clean water tank
4a. Unlatch the top by lifting up on the latches
on each side of the tank
4b. Remove the top
4c. Pour 5 ounces of formula into the heavy
duty bladder (fill the included measuring cup
twice). Fill the rest of the way with hot tap
water. Do not boil or microwave water.
4d. Re-attach top by lining up and securing the
latches on the sides of the tank
5. Plug into outlet, and turn the power switch on
NOTE: Heatwave Technology™ helps keep hot
water hot while the machine is in use. Simply
turn the machine on to activate Heatwave.
Cleaning with attachments
1. Make sure handle of machine is locked in
upright position
2. Attach the cleaning tool to the end of the hose
3. Clean by pressing the trigger to spray solution
onto the area to be cleaned
4. Slowly scrub the tool back and forth over
the soiled surface
5. Tilt the tool forward and release spray trigger
to suction liquid
www.bissell.com
800.237.7691
3
Thanks for buying a BISSELL deep cleaner
We’re glad you purchased a BISSELL
deep cleaner. Everything we know
about floor care went into the design
and construction of this complete,
high-tech home cleaning system.
Your BISSELL deep cleaner is well
made, and we back it with a limited
three-year warranty. We also stand
behind it with a knowledgeable,
dedicated Consumer Care
department, so, should you ever
have a problem, you’ll receive fast,
considerate assistance.
My great-grandfather invented
the floor sweeper in 1876. Today,
BISSELL is a global leader in the
design, manufacture, and service
of high quality homecare products
like your BISSELL deep cleaner.
Safety Instructions . . . . . . . . . . 2
Quick Start Guide . . . . . . . . . . . 3
Product View . . . . . . . . . . . . . . . 5
Assembly . . . . . . . . . . . . . . . . . . . 6
Operations . . . . . . . . . . . . . . . . 6-12
Maintenance & Care . . . . . . 13-15
Troubleshooting . . . . . . . . . . . . 16
Replacement Parts . . . . . . . . . . 17
Accessories . . . . . . . . . . . . . . . . . 18
Warranty . . . . . . . . . . . . . . . . . . . 19
Consumer Care . . . . . . . . . . . . . 19
Product Registration . . . . . . . 20
Thanks again, from all of us
at BISSELL.
Mark J. Bissell
Chairman & CEO
Tips
4
» Deep cleaning stairs and high-traffic areas on a regular » B efore turning off the machine, suction up clean
basis helps prolong carpet life.
water to thoroughly rinse out the interior of the flex
» Check upholstery stuffing before cleaning. Colored
hose. Then, lift the cleaning tool and point it upwards
stuffing may bleed through the fabric when it
to drain any remaining water into the dirty water/
becomes wet.
collection tank.
www.bissell.com
800.237.7691
Product View
1
13
2
4
3
5
6
14
7
15
8
12
9
10
11
1
2
3
4
5
6
7
8
Spray Trigger
Power Cord
Upper Handle
Flex Hose
Power Switch
Easy Carry Handle
Tank Carry Handle
Large Capacity 2-in-1 Water Tank
9
10
11
12
13
14
15
Surround Suction®
Easy To Remove Nozzle
EdgeSweep® Brushes
Lower Base
Upper Hose Rack/Cord Wrap
Lower Hose Rack/Cord Wrap
Handle Recline Pedal
www.bissell.com
800.237.7691
5
Assembly
WARNING
Do not plug in your deep cleaner until
you are familiar with all instructions and
operating procedures.
Your deep cleaner comes in three (four on select
models) easy-to-assemble components:
Upper Handle with Screws
Lower Base
Upper Hose Rack
Upper Tool Holder (select models)
1.
2.
3a.
3b.
The only thing you will need to assemble
your cleaner is a Phillips head screwdriver.
1. Slide upper handle onto lower handle.
2. Screw 2 screws into the marked holes
(screws will be taped to handle).
3. Place upper hose rack onto back of
upper handle, and secure with screw.
4. Wrap power cord and flex hose. Snap hose
wand into hose clip on upper hose wrap.
NOTE: Take care to wrap the hose in the
right direction in order to make use of the
hose clip. Make sure the hose is wrapped
beginning from the back of the machine
and wrapping toward the front.
4.
Deep cleaner assembly is now complete.
Operations
WARNING
Cleaning fluid
To reduce the risk of fire and electric shock
due to internal component damage, use
only BISSELL cleaning fluids intended for use
with the deep cleaner.
Keep plenty of genuine BISSELL 2X formula on
hand so you can clean and protect whenever it
fits your schedule. Always use genuine BISSELL
deep cleaning formulas. Non-BISSELL
cleaning solutions may harm the machine and
will void the warranty.
Professional
Deep Cleaning
Pet Stain & Odor
Deep Clean
& Protect
Allergen Cleansing
Spring Breeze
Hard Floor Solutions
Tough Stain Pretreat
Best for
Out Cleans
all other
formulas
Removes tough pet
stains and contains
patented odor
removal technology
Deep cleans carpets
and protects from
future stains with
Scotchgard™ Protector
Helps remove pet &
pollen allergens
Powerful
cleaning with a
refreshing scent
For use with
the Bare
Floor Tool
(select models)
Pretreat to
penetrate
and loosen
tough stains
2X Concentrated
Scotchgard™ Protection®
X
X
X
X
X
X
X
X
X
*ONLY BISSELL Protects from future stains with Scotchgard™ Protector
6
www.bissell.com
800.237.7691
Operations
Before you clean
1. Move furniture to another area if cleaning
an entire room (optional).
2. Pick up all loose dirt, debris, and pet hair
before deep cleaning. It is recommended that
you vacuum the area prior to deep cleaning.
3. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the corner
farthest from your exit.
7
8
9
6
5
4
1
2
3
4. Pretreating (optional) is recommended to
improve cleaning effectiveness for heavily soiled
carpet in high traffic areas such as entryways
and hallways.
Attention
Some Berber carpets have a tendency to fuzz
BISSELL Tough Stain Pretreat
a. Spray the BISSELL Tough Stain Pretreat
formula onto heavy traffic areas, soiled areas,
or stains.
with wear. Repeated strokes in the same area
with an ordinary vacuum or deep cleaner
may aggravate this condition. Please see Stain
Removal instructions on page 11.
b. Allow to penetrate for at least 3 minutes.
c. Clean as normal following the instructions
on the next page.
Machine Prep
1. Fill the 2-in-1 Water Tank. Remove the tank
from the base of the machine by lifting up the
tank carry handle. Carry like a bucket to the sink.
1.
2.
3.
4.
2. Unlatch the top of the tank from the bottom
by lifting up on the tank latches on either
side of the tank.
3. Using the measuring cup provided, pour
5 oz of BISSELL 2X formula into the heavy
duty bladder. Fill the rest of the heavy duty
bladder with hot tap water. DO NOT BOIL
OR MICROWAVE WATER.
NOTE: Always use genuine BISSELL 2X
formulas to maximize cleaning and for the
safety of your machine.
4. Place the top of the tank back on the
bottom and secure the latches on both sides.
Note: Remember to secure the tank latches
on either side of the tank and test to make sure
they are secure before picking up the tank.
WARNING
To reduce the risk of fire and electric shock
due to internal component damage, use
only BISSELL cleaning fluids intended for use
with the deep cleaner.
www.bissell.com
800.237.7691
7
Operations
Carpet cleaning
1. Plug into a proper outlet and push the on/off
button located on the front of
the handle.
2. Recline the handle by pressing on the lever
at the back of the machine behind the 2-in-1
water tank.
3. Cleaning Strokes. While pressing the trigger,
make one slow forward wet pass and another
one back. Caution: Do not overwet. Take care
not to run over loose objects or edges of area
rugs. Stalling brush may result in premature
belt failure.
Note: Your machine is equipped with a circuit
breaker that will automatically shut off the
brush if a large or loose object is caught in the
brush roll. If that happens, be sure to unplug
your machine, remove the foreign object, and
then plug the machine back in to reset the
circuit breaker.
4. Release the trigger and make one slow
forward and backward pass over the same area
to remove any residual dirty water and aid in
drying. Repeat cleaning passes until solution
being pulled up appears clean. Continue
passes without pressing the trigger until you
can’t see any more water being pulled up.
8
www.bissell.com
800.237.7691
1.
2.
Operations
WARNING
Cleaning with attachments
To reduce the risk of injury, be extra careful when cleaning
stairs. Make sure machine is secure and level.
Your deep cleaner comes equipped with
a hose and at least one attachment for
cleaning stairs, upholstery, and more.
1. Important! If using to clean upholstery,
check upholstery tags.
bvh
g kvh
gh j j h
d b lg
fd hn l kl
sd jkn f h
Ad bj jh
b j
cv hh
gcg
1. Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can use your
deep cleaner. If the tag is coded with an “X” or
an “S” (with a diagonal stripe through it), or says
“Dry Clean Only”, do not proceed with any deep
cleaning machine. Do not use on velvet or silk.
If manufacturer’s tag is missing or not coded,
check with your furniture dealer.
a. Check for colorfastness in an
inconspicuous place.
Manufacturer’s tag
b. If possible, check upholstery stuffing.
Colored stuffing may bleed through
fabric when wet.
c. Plan activities to allow upholstery
time to dry.
d. Pick up any loose dirt, debris and
pet hair before deep cleaning.
2. Follow the instructions on page 7 for
filling the 2-in-1 water tank.
3. The carpet deep cleaner is designed with
an automatic diverter. Simply lock the unit
upright in order to clean with the hose.
4. Attach the cleaning tool to the end of the hose.
4.
5. Plug in and turn on the power switch.
6. Clean by pressing the trigger to spray
solution onto the area to be cleaned. Slowly
move the tool back and forth
over the soiled surface. Release the
trigger to suction soiled water. Continue to clean
in the area, working in small sections, until no
more dirt can be removed. Rinse (optional) and
suction as needed. Caution: Do not overwet.
7. Remove and rinse tools in clean, running
water. Dry and replace on the end of the hose.
8. It is recommended that you suction clean
water from a bowl to rinse out the hose.
9. Before replacing lift end of hose and stretch
out to ensure all water is cleared from hose.
9.
10. Wrap flex hose around the hose rack.
11. Empty 2-in-1 water tank and rinse out,
following the instructions on page 10.
www.bissell.com
800.237.7691
9
Operations
Clean-up
1. Turn machine off. Remove the tank from the
base of the machine by lifting up on the tank
carry handle. Carry like a bucket to a utility sink or
outside where you will dispose of the dirty water.
1.
2.
3.
4.
2. Unlatch the top of the tank from the bottom
by lifting up on the tank latches on either side
of the tank.
3. Remove the top of the tank by lifting up on
the handle.
4. Lift the bottom portion of the tank; pour out
dirty water in the sink through the rectangular
shaped opening in the corner of the tank.
Note: You may notice hair & debris deposits
on the carpet or in the tank that were loosened
by the cleaning action. This debris should be
picked up and thrown away. Check the red lint
filter near the duct on the back of the machine
base for debris and remove before continuing.
5. Fill the heavy duty bladder with clean hot
tap water, following instructions on page 7.
Note: Remember to secure the tank latches
and test to make sure it is secure before
picking up the tank.
6. Water rinse (recommended). Rinsing
is an optional step that can be done during the
cleaning process or after the carpeted area has
been completed. Empty the heavy-duty bladder
if necessary, and refill with hot tap water only.
Replace the tank on the machine. Take care to
do a forward (wet) stroke by depressing the
trigger, and a backward (wet) stroke, followed by
a forward and backward (dry) stroke, releasing
the trigger. Continue this until the water you see
coming up the nozzle is clear. (See page 13 for
more machine care tips.)
10
www.bissell.com
800.237.7691
Filter
Operations
Stain removal
Do Not Delay! Attending to an accident soon
after it occurs ensures the most optimal clean.
Leaving it for an extended period of time may
cause it to set and become permanent.
1. Blot up liquids with an absorbent cloth or
paper towels. White materials are recommended
because certain dyes may bleed and make the
stain worse.
2. Gently scrape up any semi-solids with a spoon
or spatula. Do not use a knife or other utensil
with sharp edges because it could damage the
carpet or upholstery.
3. If the area has already dried, separate and
remove from the carpet whatever semi-solids
and residue that can be accessed before deep
cleaning.
4. Be sure to test any spot removal formulas in
an inconspicuous area first. This is important as
some dyes and materials could be damaged or
discolored by cleaning solvents. If such a change
should occur, try a different solution or call a
professional.
5. If cleaning on Berber carpeting, gently run
your machine over a hidden area. If no fuzzing
occurs, continue cleaning in soiled area.
6. Using the BISSELL Tough Stain Pretreat, spray
evenly over soiled area. Do not overwet. Wait
3-5 minutes. Gently work the solution by blotting
area with a clean, damp, color safe cloth.
7. Clean large areas with the deep cleaning
machine or use the hose to clean spots, stains
and hard-to-reach areas.
www.bissell.com
800.237.7691
11
Operations
Hard floor cleaning (select models only)
Your deep cleaner may have come with a hard
floor attachment and 2X Hard Floor Solutions
Formula. If not, these products are available for
purchase by contacting the BISSELL Consumer
Care department by phone or at
the website. The hard floor tool provides
effective cleaning for linoleum, vinyl, and
tile floors. Caution: Do not use on unsealed
hardwood floors.
WARNING
To reduce the risk of fire and electric shock- when
cleaning a hard floor, the BISSELL bare floor tool
160-0208 must be used and it must only be used with
BISSELL 2X Hard Floor Solutions cleaning fluid intended
for use with this appliance.
1. Vacuum or sweep thoroughly to pick up any
loose debris and pet hair.
2. Move any furniture, if needed.
3. Attach the hard floor tool onto the bottom
of the machine by hooking it into the nozzle
and swinging it down until it clicks into place.
4. Follow instructions on page 7 to fill the
2-in-1 water tank.
5. Plug into an outlet and turn the power
switch ON.
6. Slowly move the machine forward and
back over hard floor surface one time while
depressing trigger. Caution: Do not overwet.
7. Repeat the motion without pressing
the trigger using the hard floor tool
to squeegee and suction up the
dirty water.
8. Allow adequate time for floors to dry.
9. Remove hard floor tool, rinse and dry
before storing.
Machine storage
Once your cleaning is complete, make sure the
2-in-1 water tank is emptied, rinsed out, and
dried before the next use.
Note: Store cleaner in a protected, dry area.
Since this product uses water, it must not be
stored where there is a danger of freezing.
Freezing will damage internal components
and void the warranty.
12
www.bissell.com
800.237.7691
3.
Maintenance & Care
Tip
Machine care
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
» Let all parts
dry completely
before storing
1. Flush your machine of any remaining
residual solution.
WARNING
a. Fill the 2-in-1 water tank with clean hot
tap water.
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
b. Recline the handle and press the spray
trigger for 15 seconds while making forward
and backward passes on carpet. Release the
trigger to suction. Repeat for another 15 seconds. Continue without pressing the trigger
until there is no more water being suctioned.
2. Push the power button to turn the machine
off. Unplug the machine and wrap the power
cord. Empty the 2-in-1 water tank.
4.
3. Rinse out 2-in-1 water tank with hot tap water,
taking care to clean underneath the heavy duty
bladder and all around it.
Filter
4. The top half of the tank can be rinsed clean
through the nozzle area. Clear the red filter of
any debris that may have accumulated.
5. Keeping the 2-in-1 water tank off the base of
the machine, simply remove the floor nozzle by
turning the locking keys (see image for location)
to the “unlock” position and lift up. Rinse the
floor nozzle at the faucet.
6. Any loose hair or debris can be pulled from
the brush rolls and thrown away. For the most
thorough clean before storage, follow directions
on the following pages for removal and
replacement of the brush rolls and belts.
5.
6.
7. Replace nozzle by lining up the locking keys
with their slots and placing the nozzle and end
caps back onto the foot of the machine. Secure
into place by turning the locking keys to the
“lock” position.
8. To clean attachments that may have been
used, remove from hose and rinse under clean,
running water. Dry and replace attachment in the
hose rack. Clean the hose by suctioning clean
water from the tap. Before replacing, lift end
of hose and stretch out to ensure all water is
cleared from hose. Refer to page 9.
9.
Diverter
9. To clean the suction diverter, remove the two
screws on the back of the diverter housing. Take
the diverter housing to a sink and rinse it with
water. Take care to remove any debris that may
build up and cause a clog. Replace the diverter
housing and the two screws.
10. After carpet is dry, vacuum again to remove
hair and fuzz.
www.bissell.com
800.237.7691
13
Maintenance & Care
Drive belt removal & replacement
Occasional replacement of one or both belts
may become necessary. If that is needed, please
follow the instructions below.
4.
3.
1. Turn off the machine, and unplug it from
the outlet.
2. Remove the 2-in-1 water tank. Set aside.
3. Remove the nozzle and end caps by
following the instructions in Step 5 on
page 13.
5.
4. Turn the machine on its side.
IMPORTANT: cord side up.
7.
5. Remove 1 silver screw from the pivot arm.
6. Remove pivot arm by gently lifting up.
7. Remove the drive belt and replace it by
first attaching it to the small drive wheel, then
attach it to the end of the inside brush.
Fluid Connection Point Filter Maintenance
Periodic cleaning of the fluid connection
point in the spray nozzle may be required.
1.
1. To clean the fluid connection point,
remove the nozzle and turn it over.
2. Clean the filter on the end of the fluid
connection point with a small paperclip
and re-attach the nozzle to the machine.
14
www.bissell.com
800.237.7691
2.
Maintenance & Care
Brush removal and brush belt replacement
Brushes can be removed for cleaning or
replacement as needed.
1. Follow drive belt removal Instructions on
page 14.
2. Remove brush rolls by pulling them off of
the metal rods. Be careful not to lose the small
washer at each end of the brush rolls.
2.
5.
3. Replace the brush belt if necessary.
4. Place cleaned or new brush rolls back onto
the rods. Make sure one washer is on each end
of the rollers prior to sliding onto the rod. Be
sure to let the rod slide through the bushing to
insure proper fit.
5. Re-attach the brush belt on the bottom
to the cogs of the small roller brushes.
6. Replace the drive belt by following step 7
on page 14.
7. Place pivot arm in place and screw in place
using the silver screw.
7.
8. Replace nozzle by lining up the locking keys
with their slots and placing the nozzle back onto
the foot of the machine. Secure into place by
turning the locking keys to the “lock” position.
If you have any questions or are having trouble
installing or replacing your belt(s) or brushes,
please contact BISSELL Consumer Care.
www.bissell.com
800.237.7691
15
Troubleshooting
Problem
Reduced
spray or
no spray
DirtLifter®
PowerBrush
does not turn
Cleaner
not picking
up solution
Possible causes
Remedies
Water tank may be empty
Turn power off. Fill heavy duty
bladder with hot tap water. Do
not boil or microwave water.
Tank may not be seated
completely
Turn power OFF. Remove and
reseat tank
Pump may have lost prime.
Turn power OFF and then back ON.
Wait one minute, then depress trigger
The belt is off or broken
Turn power OFF and unplug unit
from outlet. Follow instructions on
page 14
Circuit breaker on machine may
have tripped
Turn the machine OFF and unplug
from outlet. Check to see if foreign
object is caught in brush roll.
Remove object. Plug machine in to
reset circuit breaker
Tank may not be seated properly
Turn machine off. Pick up the 2-in-1
water tank and re-seat it so it sits
snugly on the unit.
Tank may not be assembled
properly
Turn machine off. Make sure the tank
latches on both sides of the tank are
latched properly. To make sure they
are both latched properly, pick the tank
up by its handle.
2-in-1 water tank is empty
Turn machine off. Check fluid levels in
heavy-duty bladder.
2-in-1 water tank has picked up
maximum dirty water and red
float door has closed.
Turn machine off. Empty 2-in-1 water
tank. Refill heavy duty bladder with
clean hot tap water and replace.
Red float "door" in the tank may
have closed as a result of bumping
object or moving machine back
and forth too quickly
Turn the machine OFF , allowing red
float door to release into the open
position. Turn unit back ON to
continue cleaning. Be sure your
forward and backward strokes are
done at a slower pace.
Red lint screen near air duct
is dirty
Turn machine off. Follow cleaning
instructions in Step 4 on Page 13.
Please do
not return
this product
to the store.
16
WARNING
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
For any questions or concerns, BISSELL is happy to
be of service. Contact us directly at 1-800-237-7691.
www.bissell.com
800.237.7691
Replacement Parts
These items are available for your BISSELL DeepClean Premier deep cleaner.
Call 1-800-237-7691 or visit www.BISSELL.com
Part #
Part Name
Part #
Part Name
160-0087
Tank Lid (Blackberry Purple)
160-0092
Tank Bottom
160-0097
Tank Cap & Insert Assembly
160-0098
Floor Nozzle with End Cap
Assembly
160-2670
Float Door
160-0209
Measuring Cup
160-0104
Brush Roll – 6 row (includes 1
Brush, Axle, 2 Swivel Arms)
160-2669
Small Brush Belt (right side)
203-6804
Large Brush Belt (left side)
160-0079
Upper Hose & Cord Wrap
*Not all parts are included with every model.
www.bissell.com
800.237.7691
17
Accessories
These items are available for your BISSELL DeepClean Premier deep cleaner.
Call 1-800-237-7691 or visit www.BISSELL.com
Part #
Part Name
Part #
Part Name
203-6651
3” Tough Stain Tool
203-6652
Powered TurboBrush®
Hand Tool
203-6653
4” Upholstery Tool
203-6654
6” Stair Tool
203-6655
Spraying Crevice Tool
160-0208
Bare Floor Tool
203-7412
Deep Reach Pet Tool
160-0057
Stain Trapper Tool
62E5-2
2X Deep Clean and Protect
Formula with Scotchgard™
Protection 60 oz.
99K5-2
2X Pet Stain and Odor
Formula with Scotchgard™
Protection 60 oz.
89Q5-2
2X Allergen Cleansing
Formula 60 oz.
26V2
2X SpringBreeze
Formula 60 oz.
78H6-3
2X Professional Deep Cleaning
Formula with Scotchgard™
Protection 48 oz.
56L9
2X Hard Floor Solutions
Formula 16 oz.
4001
Tough Stain PreTreat 22 oz.
*Not all parts are included with every model.
18
www.bissell.com
800.237.7691
Warranty
Service
Limited Three-Year Warranty
Contact BISSELL Consumer Care to locate a BISSELL Authorized Service
Center in your area.
If you need information about repairs or replacement parts, or if you
have questions about your warranty, contact BISSELL Consumer Care.
This warranty gives you specific legal rights, and you may also
have other rights which may vary from state to state. If you need
additional instruction regarding this warranty or have questions
regarding what it may cover, please contact BISSELL Consumer
Care by E-mail, telephone, or regular mail as described below.
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon
receipt of the product BISSELL will repair or replace (with new or
remanufactured components or products), at BISSELL’s option, free
of charge from the date of purchase by the original purchaser, for
three years any defective or malfunctioning part.
See information below on "If your BISSELL product should
require service".
This warranty applies to product used for personal, and not commercial
or rental service. This warranty does not apply to fans or routine
maintenance components such as filters, belts, or brushes. Damage or
malfunction caused by negligence, abuse, neglect, unauthorized repair,
or any other use not in accordance with the User's Guide is not covered.
BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S
LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
If your BISSELL product should
require service:
Website or E-mail:
www.BISSELL.com
Or Call:
BISSELL Consumer Care
1-800-237-7691
Monday – Friday 8am - 10pm ET
Saturday 9am - 8pm ET
Sunday 10am - 7pm ET
Or Write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids, MI 49501
ATTN: Consumer Care
Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM
THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER
WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES
WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE THREE YEAR DURATION FROM THE
DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied
warranty last so the above limitation may not apply to you.
NOTE: Please keep your original sales
receipt. It provides proof of date of purchase
in the event of a warranty claim.
www.bissell.com
800.237.7691
19
Register your product today!
Registering is quick, easy and offers you benefits over the lifetime of your product.
You’ll receive:
BISSELL Rewards Points
Automatically earn points for
discounts and free shipping on
future purchases.
Faster Service
Supplying your information now
saves you time should you need to
contact us with questions regarding
your product.
Product Support Reminders
and Alerts
We’ll contact you with any
important product maintenance
reminders and alerts.
Special Promotions
Optional: Register your email
to receive notice of offers,
contests, cleaning tips and more!
Visit www.BISSELL.com/registration now!
BISSELL Consumer Care
For information about repairs or replacement parts, or questions about your warranty:
Call:
Write:
BISSELL Consumer Care
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Care
1-800-237-7691
Monday - Friday
Saturday
Sunday
8 am - 10 pm ET
9 am - 8 pm ET
10am - 7pm ET
Visit the BISSELL website: www.BISSELL.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of purchase
date in the event of a warranty claim. See Warranty on page 19 for details.
We can’t wait to hear from you!
Rate this product and let us (and millions
of your closest friends) know what you think!
www.BISSELL.com
20
©2013 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 160-2816 Rev 07/13
Visit our website at: www.BISSELL.com
Scotchgard is a trademark of 3M
Download PDF