Finishing Mowers - Walco\Douglas

Finishing Mowers
SECTION
- Walco\Douglas
M
TONDEUSE DE FINITION ROTATIVE
Rear Discharge Models
 Avoid throwing dangerous debris to side areas
 Close trimming edge on both sides of mower
 Good overlap on blades
 Powder coat paint  Peinture à base de poudre statique

90” Extra Wheels

MODEL
CUTTING WIDTH
OVERALL WIDTH
ACRES/HR. @ 5mph
HP REQUIRED
3 POINT FIXING
RPM AT PTO SHAFT
NUMBER OF BLADES
BLADE TIP SPEED AT 540 RPM
WHEELS
CUTTING HEIGHT ADJUSTABLE
DECK CONSTRUCTION
SHIPPING WEIGHT
60-RD
58”
63”
3.03 acres /hr.
14 /22
Cat. I
Floating Linkage
540
3
17,900 ft/min.
4.10 /3.50-4
4 Pneumatic
2” - 5”
8 Gauge Steel
473 lbs.
72-RD
69”
76”
3.63 acres /hr.
18 /25
Cat. I
Floating Linkage
540
3
16,775 ft/min.
4.10 /3.50-4
4 Pneumatic
2” - 5”
8 Gauge Steel
500 lbs.
60” to 72”
90-RD
87”
94”
4.57 acres /hr.
20 /25
Cat. I
Floating Linkage
540
3
17,340 ft/min.
4.10 /3.50-4
5 Pneumatic
2” - 5”
8 Gauge Steel
650 lbs.
 Easy wheel adjustment for cutting height
 Adjustable belt tension
 Four pneumatic tires with tubes and a free floating hitch on all
three points, allowing mower to follow the contour of your lawn
 Easy lubrication access
 48SD is a side discharge mower
 Position of shrouding creates excellent lift for grass, and
an even discharge
HEAD OFFICE
www.walcoequipment.com
20 ARTHUR STREET NORTH, ELMIRA, ONTARIO N3B 1Z9
ORDER DESK
TEL: (519) 669-4025
FAX: (519) 669-1436
e-mail: orders@walcoequipment.com
TEL: (519) 669-1401
FAX (519) 669-3499
QUEBEC OFFICE
364 RTE.122 ST.GERMAIN DE GRANTHAM, QUÉBEC J0C
WALCO USA
4469 292nd St. E. Box 57 Randolph MN 55065
TEL: (819) 395-5115
Fax (819) 395-2624
e-mail: walcoqc@walcoequipment.com
Tel: (507) 663-9090 Fax (507) 663-0999