tinsley 3 in 1 upholstered crib br1414b2

DOREL ASIA
Model No:
BR1414B2
TINSLEY 3 IN 1
UPHOLSTERED CRIB
UPC CODE:
0-65857-16909-6
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
(TAKEN FROM CARTON)
_______________________________
Date of purchase:
______ / ______ / ______
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
NEED
HELP!
Tel #:
1-800-295-1980
CALL US FOR ASSISTAN
E-Mail: das@dorel.com
1-800-295-1980
Fax #:RETURN
514-353-7819
DO NOT
PRODU
E-MAIL:DAS@DOREL.CO
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number, color and a
detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada, H1G 3L1
E-MAIL: das@dorel.com
WARNING
*
*
Failure to follow these warnings and assembly instructions could result in serious injury or death.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
*
Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts or sharp
edges before assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT
use crib if any parts are missing, damaged or broken. Contact a customer service representative at 1-800-2951980 for replacement parts and instructional literature if needed. DO NOT substitute parts.
*
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding
under an infant.
*
*
Stop using the crib when child begins to climb out or reaches the height of 35 inches (89 cm).
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep,
unless otherwise advised by your physician.
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
Strings can cause strangulation! DO NOT place items with a string around a child's neck, such as hood
strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.
*
*
*
*
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose
fasteners.
If refinishing, use a non-toxic finish specified for children's products.
When child is able to pull to standing position, set mattress to lowest position and remove bumper pads,
large toys and other objects that could serve as steps for climbing out.
Never use plastic shipping bags or other plastic film as mattress covers because they can cause
suffocation.
Replace teething rail if damaged or loose (if teething rail is provided for this model).
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8
INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).
Infants can suffocate in gaps between crib sides and a mattress that is too small.
*
Follow warnings on all products in a crib.
*
*
*
*
*
* INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and between bed parts
*
*
*
*
*
*
can entrap head and neck of a small child.
NEVER use bed with children under 15 months or over 50 lbs.
ALWAYS follow assembly instructions.
STRANGULATION HAZARD. NEVER place bed near windows where cords from blinds or drapes may
strangle a child.
NEVER suspend strings over a bed.
NEVER place items with a string, cord, or ribbon around a child's neck, such as hood strings or pacifier
cords. These items can catch on bed parts.
CAUTION
ENTRAPMENT HAZARD. To avoid dangerous gaps, any mattress used on this bed shall be a full-size
crib mattress at least 51-5/8 inches (1310 mm) in length, 27-1/4 inches (690 mm) in width, and a max
thickness of 6 inches (150 mm).
NOTES
* Ensure all parts and components are present before beginning assembly.
* Assemble on a soft, smooth surface to prevent damage to product finish.
* Phillips head screw driver is not included.
* DO NOT use power tools.
* CAUTIONS: Adult assembly required.
* Assembly will require two people.
* Estimated assembly time: 30 minutes.
CARE AND CLEANING
Wood: Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood
furniture.
Fabric: Dust regularly with a soft, dry cloth to prevent soil build-up. Keep away from heat to avoid
glazing, melting or scorching. Use a professional cleaning service to clean the fabric.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This warranty does
not apply to any product which has been improperly assembled, subjected to misuse or abuse or
which has been altered or repaired in any way. This warranty gives you specific legal rights and you
may also have other rights which vary from State to State. Any wearing, tearing or fading of the fabrics
is not covered under the warranty.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
TINSLEY 3 IN 1 UPHOLSTERED CRIB
BR1414B2
HARDWARE LIST
1
2
Ø10 X 40mm
WOOD DOWEL
10 PCS
3
ALLEN KEY
1 PC
4
Ø1/4" X 15mm X 51mm
Ø5/16" X 13 X 1.5mmT
BOLT
14 PCS
SPRING WASHER
14 PCS
5
6
30 X 15mm X 7.5mm
Ø1/4" X 15mm X 19mm
CURVED NUT
2 PCS
MATTRESS SUPPORT BOLT
16 PCS
7
Ø1/4" X 11 X 1.2mmT
SPRING WASHER
16 PCS
TINSLEY 3 IN 1 UPHOLSTERED CRIB
BR1414B2
PARTS LIST
A
B
SIDE PANEL
2 PCS
E
MATTRESS SUPPORT
1 PC
C
FRONT/BACK PANEL
2 PCS
BOTTOM RAIL
1 PC
TINSLEY 3 IN 1 UPHOLSTERED CRIB
BR1414B2
CRIB ASSEMBLY INSTRUCTION
NOTE: When inserting bolts, turn clockwise until tight. Then loosen 1/2 - 3/4
of a turn. After crib is completely assembled, return to each bolt and tighten.
Use wax or soap on all bolts to facilitate assembly.
TINSLEY 3 IN 1 UPHOLSTERED CRIB
BR1414B2
STEP 1
Insert wood dowels (1) into side panels (A).
Attach front/back panel (B) to side panels (A) with bolts (3), spring washers (4) and Allen
key (2) as shown. Do not fully tighten the bolts.
A
B
A
1
3
4
TINSLEY 3 IN 1 UPHOLSTERED CRIB
BR1414B2
STEP 2
Attach the mattress support (E) to side panels (A) with mattress support bolts (6), spring
washers (7) and Allen key (2). Do not fully tighten the bolts.
B
A
A
E
6
7
INCORRECTRaised edge
should face down
-this photo shows
mattress support
is upside down.
INCORRECTTabs on corners
of mattress
support should
point up.

CORRECT
*Tabs to point UP.
* Flat surface of mattress
support to face up mattress must sit on flat
surface.
NOTE: The above photos and drawings showing how to properly attach the
mattress support are for reference only. Crib styles and colors will vary.
TINSLEY 3 IN 1 UPHOLSTERED CRIB
BR1414B2
STEP 3
Repeat STEP 1 to attach the other front/back panel (B) to the side panels (A).
Tighten all bolts from STEP 1 to STEP 3 with Allen Key (2).
You've finished assembling your crib.
B
A
A
B
1
3
4
TINSLEY 3 IN 1 UPHOLSTERED CRIB
BR1414B2
B
3
A
A
C
4
5
1
WARNINGS:
* ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8
INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).
* The toddler bed or day bed is not intended for children under 15 months of age or
over 50 lbs (22.7 kgs).
DAY BED ASSEMBLY: STARTING FROM CRIB
STEP 1: Detach one front/back panel (B) with Allen Key (2).
STEP 2: If the mattress support (E) is not in the lowest position, unscrew bolts (6) from
the side panels (A) and move mattress support (E) to the lowest position.
STEP 3: Attach bottom rail (C) to side panels (A) with wood dowels (1), bolts (3), spring
washers (4) and curved nuts (5). Use Allen key (2) to tighten the bolts.
STEP 4: Ensure all bolts are tightly secured.
DAY BED ASSEMBLY: STARTING FROM SCRATCH
STEP 1: Follow steps 1 to 2 of the crib assembly instructions.
STEP 2: Attach bottom rail (C) to side panels (A) with wood dowels (1), bolts (3), spring
washers (4) and curved nuts (5). Use Allen key (2) to tighten the bolts.
TINSLEY 3 IN 1 UPHOLSTERED CRIB
BR1414B2
Convert your crib into a toddler bed with the Bertini Tinsley
Uphosltered Crib Toddler Bed Conversion kit (model number
BR1414-5 / item number 480826) sold separately on
www.toyrus.com.
TINSLEY 3 IN 1 UPHOLSTERED CRIB
BR1414B2
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27-1/4 INCHES
BY 51-5/8 INCHES (69CM BY 131CM)
WITH A THICKNESS NOT EXCEEDING
6 INCHES (15CM).
Stop using crib when child begins to
climb out or reaches the height of 35
inches (89 cm).
Maximum weight not to exceed 50
pounds when used as a crib.
The TODDLER BED or DAY BED
is not intended for children under
15 months of age or over 50
pounds (22.7 kgs).
That's it ! You've finished assembling your 3 in 1 convertible crib!
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
NEED
Tel HELP!
#: 1-800-295-1980
CALL
US
FOR ASSISTANC
E-Mail: das@dorel.com
1-800-295-1980
Fax #:RETURN
514-353-7819
DO NOT
PRODUC
E-MAIL:DAS@DOREL.COM
MODEL #: BR1414B2
Customer Service
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
Email: das@dorel.com
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Download PDF