How to Use the PMS Port Test

How to Use the PMS Port Test
How to Use the PMS Port Test
Function:
The “PMS Port Test Mode” setting on the PMS configuration page provides a quick way to
verify that the PMS serial interface is working. This can eliminate questions about hardware
problems when troubleshooting PMS configurations.
Preparation:
Verify the terminal program is working properly by connecting the console cable to the
Nomadix console port and your laptop’s serial port. Launch the terminal program and
confirm you can login to the management interface.
Connect the DB9 to Ethernet adapter supplied with the Nomadix Access Gateway to the PMS
Port. Disconnect the cable from the console port and connect to the DB9 to Ethernet adapter
supplied with the gateway.
Configuration:
Navigate to Configuration -> PMS and select PMS Port Test Mode then click the Submit
button.
Test:
Type any character, readout of the result tests both receive and transmit.
Keys typed will be displayed
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising