INSTRUCTION MANUAL STEAM IRON

INSTRUCTION MANUAL
STEAM IRON
LI2788CS
Please read these instructions manual carefully before using the appliance
Dear Customer
Congratulations on being the proud owner of Lloyd Steam
Iron. Your Steam Iron comes with a Lloyd Guarantee of
Quality.
Lloyd takes great pride in providing its customers with perfect
products that adheres to international quality standards.
Lloyd is committed to provide the ultimate customer
satisfaction as nothing brings us greater joy than having
satisfied customers of Lloyd.
At Lloyd, feedback and suggestions based on your product
usage experience are greatly appreciated.
Please feel free to contact us at perfectservice@lloydmail.com
NIPUN SINGHAL
DIRECTOR
Attention:
* Please read the owner’s manual before using the product.
* Before using, please check the voltage of the product if it is the same
with the one in your home.
* When using steam ironing and self cleaning function, you are
recommended to use distilled water.
* The water will leak from the soleplate if using ironing with steam but
temperature below level * * . Please note, its a normal
phenomenon.
* During the iron is electrified, operator must not leave, and let
children not touch the iron.
*
* After using, turn the steam knob to “
”, turn the temperature
regulating knob to “0”, pull out the plug, put the iron on the smooth
and stable place vertically.
* If the supply cord is damaged, it must be replaced by the
service personnel in order to avoid a hazard.
* The iron is not to be used if it has been dropped, if there are visible
signs of damage or if it is leaking.
* The iron must be used and placed on a stable surface.
* When placing the iron on its stand, ensure that the surface on which
the stand is placed is stable.
* Children should be supervised to ensure that they do not play with
the appliance.
Main features:
The product has many functions such as Temperature Regulation, Water
Spray, Dry Ironing, Steam Function, Burst of Steam Function etc. and has
an aesthetic shape and appeal.
D
B
E
C
A
J
F
I
G
K
H
A: Steam Regulation Knob
G: Water tank
B: Steam Burst Button
H: Non-stuick Soleplate
C: Spraying button
I: Spray Nozzle
D: Indicator bulb
J: Cover
E: Cable Retracting Button
K: Self-clean
F: Temperature Regulation knob
How to dry ironing:
1. Turn the temperature regulation knob to “0” position, turn the steam
knob to “0” position, put the plug into the socket.
2. Turn the temperature regulation knob to the temperature scale which
the ironed clothes required, the indicator will light on, then put the
iron on the smooth and stable place vertically.
3. After the indicator turn off, you can begin to iron.
How to spray:
Press the Spray Button repeatedly, water will spray out from the spraying
mouth, at the time, you should keep enough water in the water tank.
How to iron with steam:
1. Fill water in the water tank.
2. Use steam ironing, turn the steam knob to the “1, 2, 3” position, the
method for regulating the temperature is the same with dry ironing.
3. After indicator turn off, turn the steam knob to the “1, 2, 3” position,
steam will spray, you can start to iron.
4. After ironing complete, turn the temperature regulation knob to the “0”
position, pull out the plug, take off the water tank, pour out the
remaining water, turn the steam knob to the “0” position
How to use Burst of Steam:
Press down the Steam Burst Button, the base plate will spray out a strong
burst steam. Attention: Strong steam must be used in steam ironing. (The
temperature regulation knob must be turned to the steam section).
Correct fabric ironing
Attention:
1. Heat sensitive clothes ironing, please cover a piece of cloth on the
, otherwise the clothes will be burnt.
2. Different material ironing, please adjust temperature according to the
heat resistant of the material.
Cloth
Temperature Marks in Preferable ironing method
material
setting
Nylon
*
clothes
Ironing
the
back
of
clothes
without any water or cover a
piece of cloth on the goods you
want to iron
Synthetic
*
clothes
fabric or Silk
Wool
Dry ironing the back of the
**
According to the thickness and
Cotton
***
gauffer to iron with steam. For
some
Linen
MAX
fuscous clothes, we
would better adopt to back
ironing.
Troubleshooting
Inspection Water tank
part
Temperature
adjusting knob
Steam bore
power
supply
Heating body
power
Failure
No steam
*
Little steam
Can not heat up
*
Cloth
burnt and
shrink
Water drop from the
steam bore
*
*
*
*
*
*
*
*
*
water tank Temperature
Clean
out
without
adjusting knob dirts
from
water
in the correct steam bore
position or not,
choose a right
temperature,
check the
Check if the
indicator light indicator light is
is working or on
not, and
power supply
correctly