mph (25.4km/h) 16.4mph (26.7km/h) ~-

8ti~!lli'jI18
I;fHlli'JU8
ENGINE
Type""""""
"."""
""
"
"".."".".]ohn Deere PowerTech@6081H with altitude-compensating
turbocharger and aftercooler; meets North American EPA
and CARB non-road diesel engine emission regulations
effective january 1,1997; also is certifiable to proposed E.U.
(European Union) regulations, which are not yet effective
Rated power
Gear 1 """""""".".""""""."""."""".".,,180
SAEnet hp (134 kW), 212 SAEgross hp (158 kW) @
2,200 rpm
SAEnet hp (149 kW), 232 SAEgross hp (173 kW) @
2,200 rpm
Gears 2-4.""""""""""""""""""""""",,200
"
""
""...6
Cylinders
Displacement.."""""""""""".""""""""."".496
cu. in. (8.1 L)
Maximum net torque
Gear 1 (47% torque rise) "."""""""""",,734Ib.-ft.
(995 Nm) @ 1,300 rpm
Gears 2-4 (40% torque rise) """"""""",,745
Ib.-ft. (1010 Nm) @ 1,300 rpm
system
with
full-flow
spin-on
Lubrication """ " " " " """.". ,," " " "" " " "" " " " "pressure
Fuel consumption, typical """""""".""""".2.9
to 5.0 gal./hr. (10.9 to 18.8 Llh)
john Deere PowerTech. 6125A dual horsepower, turbocharged and aftercooled; meets North American EPA and
CARB non-road diesel engine regulations effective january 1,
1997; also is certifiable to proposed E.U. (European Union)
regulations, which are not yet effective
240 SAE net hp (179 kW), 263 SAE gross hp (196 kW) @
2,000 rpm
260 SAE net hp (194 kW), 283 SAE gross hp (221 kW) @
2,000 rpm
6
766 cu. in. (12.5 L)
980 Ib.-ft. (1330 Nm) @ 1,500 rpm
980 Ib.-ft. (1330 Nm) @ 1,500 rpm
filter
and
pressure system with full-flow spin-on
4.0 to 10.0 gal./hr. (15 to 38 Llh)
cooler
filter and cooler
Electrical system """"""""""""".""""""".,,24
Batteries (two 12 volt) ."".""""."""""""".".750
blower type
24 volt with 55-amp alternator
950 CCA; reserve capacity: 200 min.
Air cleaner ""."."""""".
dual safety element dry type; restriction indicator for service
Cooling
fan
"""
" " ""."
,,"" """
".".
" ""."
""."blower
type,
hydraulically
driven
volt with 55-amp alternator
CCA; reserve capacity: 150 min. - standard / 950 CCA;
reserve capacity: 200 min. - optional
"" " "" " " "" " " " ". "".dual safety element dry type; restriction indicator for service
TRANSMISSION
Type"""".
"""""""".
"" " " """
" " "" " " " ". "" "single
stage,
single
phase
torque
converter;
countershaft-
type power shift with computer control
shifts under any power condition provided by computer-controlled electronic shift with individual electronic
control over each clutch pack, one low-effort twist-grip
shift lever, quick-shift button on hydraulic lever, automatic
shift feature is selectable to shift between gears 1-4 or 2-4
Forward
Reverse
mph (7.9 km/h)
5.1 mph (8.3 km/h)
mph (13.6 km/h)
8.8 mph (14.2 km/h)
Controls""""""""""""""".""""."""".""""smooth
Travelspeeds*
Gear 1...""".""""""""""""""""""""",,4.9
Gear 2""""""""""""""".""""".""""",,8.4
mph (25.4km/h) 16.4mph (26.7km/h)
Gear 3"""".""""""""""""""""."""".".15.7
Gear 4 """""""""""".".""""""""""".".24.0
mph (39.0 km/h)
*644H MH equipped with 23.5-25 tires; 744H MH equipped with 26.5-25 tires.
single stage, dual phase torque converter; countershaft,
computer-controlled
power shift
smooth shifts under any power condition provided by computer-controlled electronic shift with individual electronic
control over each clutch pack, twist-grip shift lever, quickshift button on hydraulic lever, automatic shift feature is
selectable to shift between gears 1-4 or 2-4
Forward
Reverse
4.6 mph (7.4 km/h)
8.6 mph (13.9 kill/h)
13.1 mph (21.2 km/h)
24.5 mph (39.5 km/h)
4.6 mph (7.4 km/h)
8.6 mph (13.9 km/h)
19.3 mph (31.0 km/h)
AXLES/BRAKES
Final drives """
" " " """"
" " " """
" " " " " ""
" " "heavy-duty
planetary,
mounted
inboard
Differentials"""""""".""""""".""""""."""conventional
front and rear - standard; hydraulic locking
front, conventional rear - optional; dual locking front and
rear - optional; limited slip front and rear - optional
Rear axle oscillation, stop to stop ""."."""".26 degrees
Maximum rise and fall, single wheel..."""".19.2
in. (488 mm)
Brakes (conform to SAE]1473, IS03450)
Servicebrakes"""
" " " "". "" " "". "" " "". ".inboard-mounted
hydraulic
wet-disc,
bathed
in cooling
oil,
long life self-adjusting
Parking brake """"""""""""."""""""".automatically
spring applied, hydraulically released, wet
disc bathed in cooling oil
HYDRAULIC
SYSTEM/STEERING
Pump (loader and steering) """"""""."""""variable-displacement,
axial piston pump; closed-center,
pressure-compensating system
Maximum flow""""""""."."""".""""".74
gpm (280 Llmin.) @ 1,000 psi (6895 kpa) and 2,200 rpm
Pressure """""."""""""""""""."."""""Ioader
and steering relief 3,600 psi (24 850 kPa)
heavy-duty planetary, mounted inboard
conventional front and rear - standard; hydraulic locking
front - optional; dual locking front and rear - optional
26 degrees
19.5 in. (495 mm)
inboard-mounted hydraulic wet-disc, bathed in cooling oil,
long life self-adjusting
automatically spring applied, hydraulically released, wet
disc bathed in cooling oil
-
Loader
controls"
" " " " " """".
". " " "". " " """
".two-function
valve;
single
or dual
lever
controls;
control
lever lockout feature; optional third- and fourth-function
valve with auxiliary lever
Hydraulic cycle times
Raise".".".".."""."
Dump
""
"""."""""."
""
""
""
Lower"""""""."."""""""""""""""""".3.0
Total
""
"""
"""
"".6.0
see.
"".1.2
see.
see. (float down) / 3.5 see. (power down)
"".9.3 see.
Maximum lift capacity"""""""""""""""""with
Lift at ground
level...".
3.5 cu. yd. (2.7 m3) excavatingbucket
"" " " """ " " " ",," ,,33,930
lb. (15 391 kg)
Lift at maximum height.. " " "" " " " "". "".20,130 lb. (9132 kg)
Steering (conforms to SAE]1511)
,Type""
""""
"""
""
"power fully hydraulic
Pressure-relief valve setting."""""."""".3,600
psi (24 850 kPa)
Articulation angle """"""."""""".""".,,80-degree
arc (40 degrees each direction)
Turning radius (measured to centerline of outside tire) ""."""""."""".,,18
ft. 0 in. (5500 mm)
two variable-displacement, load-sensing piston pumps;
closed-center system
112 gpm (423 Llmin.) @ 1,000 psi (6900 kPa) and 2,250 rpm
loader and steering relief 3,200 psi (22 000 kPa)
two-function valve; single or dual lever controls; control
lever lockout feature; optional third-function valve with
auxiliary lever
6.1 see.
1.5 see.
2.8 see. (float down) / 2.8 see. (power down)
10.4 see.
with 5.25 cu. yd. (4.0 m3) stockpiling
33,410
lb. (15 150 kg)
23,495
lb. (10655
bucket
kg)
power, fully hydraulic
3,200 psi (22 000 kPa)
80-degree arc (40 degrees each direction)
20ft. 2 in. (6.14m)
TIRES
Choice of
~
ChangeIn
TreadWidth
WidthOverTires
VerticalHeight
20.5-25,12 PRL2"""""""""""""""".".85.4 in. (2170mm) 109.3in. (2777mm) -1.0 in. (- 25mm)
20.5-25, 12 PR1.3"""""""""""""""".".85.4 in. (2170mm) 109.3in. (2777mm) -1.0 in. (- 25mm)
.
Tread Width
Width OverTires
ChangeIn
Vertical Height
I
~-
0 N ~
1~!illll!ln.
TIRES(continued)
Choice of (continued)
81!!iUI\!m8
Tread Width
20.5-25, 16 PR L3 " ""...""
"" ".85.4 in. (2170
20.5-25, XTLA L2 Michelin Radial.. " ". ".85.4 in. (2170
20.5-25, XTLA L3 Michelin Radial.. " ". ".85.4 in. (2170
23.5-25, 12 PR L2 """""""".""""""".",,85.4
in. (2170
23.5-25,20 PR L3 """""""".""""""""".85.4
in. (2170
23.5-25, GP-2B L2 Goodyear Radial..."".85.4 in. (2170
23.5-25, XHAT L3 Michelin Radial... " " ,,85.4 in. (2170
26.5-25,
16
PR
26.5-25,
20
26.5-25,20
26.5-25,
L2
..."
PR
L3
.."
PR
L5*
GP-2B
L2
.""
Goodyear
"
"
"
"
"
""
"
""...""...""...""..."
Radial..
"
"
"
""
26.5-25,XHATL3Michelin Radial""".
"
"
mm)
mm)
mm)
mm)
mm)
mm)
mm)
"
""
Width OverTires
109.3 in. (2777 mm)
106.4 in. (2702 mm)
106.2 in. (2697 mm)
113.1 in. (2874 mm)
113.4 in. (2881 mm)
113.2 in. (2875 mm)
109.1 in. (2772 mm)
"
"
"
"
"
"
""
"
"
"
""
"
"
"
" " ""
" ""
" " ". " "".
" "".
" "".
" "".
" " ""
" ""
" ""
" ""
" " ""
" ""
" " ""
""
"
"
""
""
""
""
""
""
""
"
"
" " ". " " ""
" " ""
ChangeIn
VerticalHeight
-1.0 in. (- 25 mm)
- 2.7 in. (- 68 mm)
- 2.3 in. (- 59 mm)
0 in. (0 mm)
0.2 in. (5 mID)
0.5 in. (12 mm)
0.7 in. (18 mm)
" " ""
" " ""
"
"""
CAPACITIES
(U.S.)
Fuel tank (with ground level fueling) """"".90
Cooling system.""""""".""""".""""""".",,31
Engine lubrication, including full-flow
spin-on filter ""."""."""""""""."""."".26
Power shift transmission, including
vertical cartridge filter""."""""""""."".27
Differential (each axle)
Front and rear """".""".""".""".""""".29
Loader hydraulic reservoir and filters """"".31
Parking brake.""""""".""".""".""".""""",,20
.G
88.6 in. (2200 mm)
" " ". " " """
" " "".
113.2 in. (2875 mm)
""..88.6
in.
(2200
mm)
115.8 in. (2940 mm)
116.0 in. (2947 mm)
""..88.6
in.
(2200
mm)
115.8 in. (2940 mm)
in.
(2200
mm)
115.5 in. (2935 mID)
in.
(2200
mm)
115.6 in. (2937 mm)
116.2 in. (2952 mm)
"".88.6
" " " ". " " """."""".".88.6
26.5-25, X-MINE Michelin Radial* """.""".""".""""""."""."""."""."""""""."""""""".""""""""""",,88.6
*Requires :t 8-degree rear axle stops.
1
""
Width OverTires
Tread Width
" " " " ."".88.6
in.
(2200
mm)
in. (2200 mID)
gal. (341 L)
qt. (29 L)
45 qt. (43 L)
qt. (25 L)
40 qt. (38 L)
qt. (26 L)
30 qt. (28 L)
qt. (27 L)
gal. (117 L)
oz. (0.600 L)
49qt.(46L)
ChangeIn
VerticalHeight
-3.1 in. (- 78mm)
- 1.1 in. (- 28 mm)
0
+ 1.4 in. (+35 mm)
0
-0.6 in. (-15 mm)
+ 1.5in. (+ 39 mm)
114 gal. (432 L)
38 gal. (144 L)
0.53 qt. (0.5 L)
DIMENSIONS
WITH PIN.ONTYPEBUCKET
Height to top of cab and canopy.""""
G
11 ft. 2 in. (3412 mm)
10 ft. 2 in. (3100 mm)
Ground clearance"""""""".""""""""
18.3 in. (465 mm)
18.6 in. (473 mm)
C!)Length from centerline to front axle ".,,5 ft. 3 in. (1600 mm)
ft. 6 in. (3200 mm)
0 Wheelbase."""."""""""""".""".""",,10
0 Dump height.."""".""".""".""".""",,'"
(see page 14)
G Height to hinge pin, fully raised .""",,13 ft. 8 in. (4156 mm)
0 Dump reach """""""""""""""".""""
(see page 14)
8 Maximum digging depth""""""""".,,2.7 in. (69 mm)
.
0
0
e
.
11 ft. 7 in. (3520 mm)
Height to top of exhaust.. "". " " ". " "" " 11 ft. (3362 mm)
Overall length "".""""""".""".""""."
(see page 14)
5 ft. 7 in. (1700 mm)
11 ft. 2 in. (3400 mm)
... (see page 15)
14 ft. 10 in. (4510 mm)
(see page 15)
3.8 in. (93 mm)
(see page 15)
Maximum rollback at ground level ".,,40 degrees
45 degrees
Maximum rollback at full height """,,55 degrees
52 degrees
Dump angle at SAE-rated dump
height and reach """."""."""""""".".45
45 degrees*
degrees
Maximum dump angle at full height.. ".50 degrees
*40' maximum dump angle with 5.75-cu. yd. (4.4 m') bucket.
45 degrees*
uififfillfillU
I
644H MH PIN.ON TYPE BUCKET INFORMATION
Material
Handling
w/Bolt-on
BucketType/Size
Cutting Edge
Capacity, heaped SAE.............................4.5 cu. yd.
(3.4 m3)
Capacity, struck SAE...............................3.8 cu. yd.
(2.9m3)
Bucket width ...........................................119.7 in.
(3040 mm)
Breakout force, SAE]732C ......................34,340 lb.
(15576 kg)
Tipping load, straight..............................30,906Ib.
(14019 kg)
Tipping load, 40-degreefull turn, SAE.....25,999lb.
(11 793 kg)
Reach,45-degreedump, 7-ft. (2.13 m)
clearance ...........................................65.4 in.
(1661 mm)
Reach,45-degreedump, full height........41.5 in.
(1055 mm)
Dump clearance,45 degree,full height.....116.6 in.
(2962 mm)
Overall length, bucket on ground ..........26 ft. 8 in.
(7815 mm)
Stockpiling
and General
Stockpiling
and General
Handling
w/JagzTM
4.5 cu. yd.
(3.4m')
3.8 cu. yd.
(2.9m3)
119.7 in.
(3040 mm)
33,889 lb.
(15 372 kg)
30,745 lb.
(13 946 kg)
25,847 lb.
(11724 kg)
Purpose
w/Bolt-on
Cutting Edge
4.25 cu. yd.
(3.3 m')
3.7 cu. yd.
(2.8m')
114.2 in.
(2900 mm)
34,432 lb.
(15 618 kg)
31,096 lb.
(14105 kg)
26,182 lb.
(11 876 kg)
Purpose
w/Teeth
and Segments
4.25 cu. yd.
(3.3 m])
3.7 cu. yd.
(2.8m3)
114.2 in.
(2900 mm)
34,432 lb.
(15618 kg)
30,933 lb.
(14031 kg)
26,023 lb.
(11 804 kg)
65.9 in.
65.5 in.
67.4 in.
(1675 mm)
42.3 in.
(1663 mm)
45.5 in.
(1155 mm)
116.6 in.
(1713 mm)
45.6 in.
(1158 mm)
116.6 in.
(2962 mm)
(2961 mm)
26 ft. 10 in.
Material
Handling
w/Teeth
and Segments
4.5 cu. yd.
(3.4 m')
3.8 cu. yd.
(2.9m3)
119.7 in.
(3040 mm)
34,340 lb.
(15576 kg)
30,765 lb.
(13 955 kg)
25,860 lb.
(11730 kg)
67.4 in.
(1712 mm)
45.8 in.
(1163 mm)
112.2 in.
Material
(2851 mm)
(1076 mm)
116.4 in.
(2958 mm)
26 ft. 2 in.
(7967 mm)
26 ft. 8 in.
(7825 mm)
26 ft. 4 in.
(8036 mm)
Stockpiling
and General
Purpose
w/JagzTM
4.25 cu. yd.
(3.3 m3)
3.7 cu. yd.
(2.8 m3)
114.2 in.
(2900 mm)
33,985 lb.
(15416 kg)
31,039 lb.
(14079 kg)
26,118 lb.
(11 847 kg)
66.0 in.
(1676 mm)
42.1 in.
(1071 mm)
116.4 in.
(2958 mm)
26 ft. 5 in.
(8045 mm)
(8188 mm)
Loaderclearancecircle,bucketin
carryposition
42ft.8in.
43ft.
42ft.8in.
42ft. 3 in.
42ft.7in.
42ft. 3 in.
(13 001 mm)
(13 097 mm)
(13 007 mm)
(12874 mm)
(12970 mm)
(12879 mm)
Operating weight
38,927 lb.
39,035 lb.
39,028 lb.
38,728 lb.
38,856 lb.
38,823 lb.
(17657kg)
(17706kg)
(17703 kg)
(17567kg)
(17625 kg)
(17610kg)
Loaderoperating information is based on machine with all standard equipment; 23.5-25, 20 PRL3tires; standard counterweight; ROPS/FOPScab; 175-lb. (79 kg)
operator; and full fuel tank. This information
.;f:~':II'iI:.
is affected by tire size, ballast, and different attachments.
ADJUSTMENTS TO OPERATING WEIGHTS FOR PIN.ON BUCKETS
Adjustments
to operating
weights and tipping loads for 4.5 cu. yd. (3.4 m3) material-handling
Add (+) or deduct (-) lb. (kg) as indicated
OperatingWeight
Tipping Load, Straight
for loaders with
20.5-25,12 PRL2
1,693 lb. (- 768 kg)
-1,171 lb. (- 531 kg)
20.5-25, 16 PRL3
1,576 lb. (- 715 kg)
- 1,089 lb. (- 494 kg)
20.5-25,XTLAL2Michelin Radial
l,922Ib. (- 872 kg)
-1,329Ib. (- 603 kg)
l,605 lb. (- 728 kg)
-1,1O9Ib. (- 503 kg)
20.5-25, XHATL3Michelin Radial
23.5-25,12 PR L3
384 lb. (-174 kg)
- 265 lb. (-120 kg)
23.5-25,GP-2BL2GoodyearRadial
+ 141 lb. (+ 64 kg)
+ 97 lb. (+ 44 kg)
23.5-25,XHATL3Michelin Radial
+ 364 lb. (+ 165 kg)
+ 254 lb. (+ 115 kg)
CaCl,in 20.5-25rear tires
+ 2,396 lb. (+ 1087 kg)
+ 3,314 lb. (+ 1503 kg)
bucket with bolt-on cutting
Tipping Load,
40-DegreeFull Turn
-1,012Ib. (- 459 kg)
- 941 lb. (- 427 kg)
-1,149 lb. (- 521 kg)
- 963 lb. (- 437 kg)
- 236 lb. (-107 kg)
+ 84 lb. (+ 38 kg)
+ 218 lb. (+ 99 kg)
+ 2,864 lb. (+ 1299 kg)
edge
i
,I
~
I
,1
I
644H MH BUCKET SELECTION GUIDE"
MATERIAL
(Loose
weight)
6.5
(5.0)
6.0
(4.5)
5.5
(4.2)
5.0
(3.8)
4.5
(3.4)
4.0
(3.0)
3.5
(2.7)
Deere4.5 cu. yd. (3.8 m3)
Material-HandlingBucket
I
I
I
Deere4.25 cu. yd. (3.3 m3)
StockpilingBucket
Ib./cu.yd. kg/m3
Caliche
Cinders
Clayandgravel,dry
Clayandgravel,wet
Clay,dry
Clay,naturalbed
Clay,wet
Coal,anthracite,broken
Coal,bituminous,broken
Earth,dry,packed
Earth,loam
Earth,wet,excavated
Granite,brokenor largecrushed
Gravel,dry
Gravel,dry 1/2"to 2" (13to 50 mm)
Gravel,pit run (graveledsand)
Gravel,wet1/2"to 2" (13to 50 mm)
Gypsum,crushed
Limestone,brokenor crushed
Magnetite,ironare
Phosphaterock
Pyrite,ironare
Sandandgravel,dry
Sandandgravel,wet
Sand,dry
Sand,wet
Sandstone,broken
Shale
Slag,broken
Stone,crushed
Torsoil
2,100
1,000
2,400
2,600
2,500
2,800
2,800
1,850
1,400
2,550
2,100
2,700
2,800
2,550
2,850
3,250
3,400
2,700
2,600
4,700
2,160
4,350
2,900
3,400
2,400
3,100
2,550
2,100
2,950
2,700
1,600
1250
590
1420
1540
1480
1660
1660
1100
830
1510
1250
1600
1660
1510
1690
1930
2020
1600
1540
2790
1280
2580
1720
2020
1420
1840
1510
1250
1750
1600
950
i
i
~
1
~
'This guide, representing bucket sizes not necessarily manufactured by Deere,will help you in selecting proper bucket size for material density, loader configuration, and operating conditions. Optimum bucket size
is determined after adding or subtracting all tipping load changes due to optional equipment. The "conservative load" line on this guide is recommended when operating in conditions such as soft ground and unlevel
surfaces. The "maximum load" condition on this guide is sometimes utilized when operating on firm ground and level surfaces.
i
I
~
0
N ~
744H MH PIN.ONTYPEBUCKETINFORMATION
Material
Material
Handling
w/Bolt-on
CuttingEdge
Bucket Type/Size
Capacity, heaped SAE.............................5.75 cu. yd.
(4.4m')
Capacity, struck SAE...............................5.00 cu. yd.
(3.8m3)
Bucket width ...........................................128.9
in.
'I
Handling
w/Teeth
and Segments
5.75 cu. yd.
(4.4m3)
5.00 cu. yd.
(3.8 m3)
128.9 in.
Material
Stockpiling
and General
Stockpiling
and General
Purpose
wlBolt-on
CuttingEdge
5.25 cu. yd.
(4.0m3)
4.50 cu. yd.
(3.4 m3)
119.7 in.
(3040 mm)
40,300 lb.
(18 280 kg)
37,595 lb.
(17053 kg)
32,755 lb.
(14857 kg)
31,510 lb.
(14320 kg)
Purpose
w/Teeth
and Segments
5.25 cu. yd.
(4.0m3)
4.50 cu. yd.
(3.4 m3)
119.7 in.
(3040 mm)
40,300 lb.
(18 280 kg)
37,220 lb.
(16883 kg)
32,390 lb.
(14691 kg)
31,205 lb.
(14155 kg)
Stockpiling
and General
(3275 mm)
Breakout force, SAEJ732C ......................37,175 lb.
(16860 kg)
Tipping load, straight..............................36,310
lb.
(16470 kg)
Tipping load, 35-degree full turn, SAE.....31,580 lb.
(14325 kg)
Tipping load, 40-degree full turn, SAE.....30,420 lb.
(13 800 kg)
Reach, 45-degree dump, 7-ft. (2.13 m)
clearance ...........................................74.8
in.
(1900 mm)
...... Reach, 45-degreedump, full height........49.6 in.*
(1260 mm)
... Dump clearance, 45 degree, full height.....126.1 in.*
(3202 mm)
(3275 mm)
37,175 lb.
(16860 kg)
35,930 lb.
(16300 kg)
31,210 lb.
(14160 kg)
30,050 lb.
(13 630 kg)
Handling
w/JagzTM
5.75 cu. yd.
(4.4m3)
5.00 cu. yd.
(3.8m3)
128.9 in.
(3275 mm)
35,930 lb.
(16295 kg)
35,650 lb.
(16170 kg)
30,955 lb.
(14040 kg)
29,800 lb.
(13515kg)
78.4 in.
(1960 mm)
54.4 in.*
(1382 mm)
122.5 in.*
(3111 mm)
76.4 in.
80.2 in.
83.6 in.
80.8 in.
(1910 mm)
50.6 in.*
(1285 mm)
125.1 in.*
(3177 mm)
(2005 mm)
46.4 in.
(1178 mm)
128.7 in.
(2089 mm)
51.3 in.
(1302 mm)
125.2 in.
(2021 mm)
47.4 in.
(1204 mm)
127.8 in.
(3270 mm)
(3180 mm)
(3245 mm)
......... Overall length .........................................28ft. 11 in.
(8925 mm)
29 ft. 5 in.
(8970 mm)
29 ft. 1 in.
(8860 mm)
28 ft. 7 in.
(8719 mm)
29 ft. 1 in.
(8864 mm)
28 ft. 9 in.
(8757 mm)
Purpose
w/JagzTM
5.25 cu. yd.
(4.0m3)
4.50 cu. yd.
(3.4 m3)
119.7 in.
(3040 mm)
38,930 lb.
(17660 kg)
36,965 lb.
(16 767 kg)
32,150 lb.
(14584 kg)
30,975 lb.
(14050 kg)
Loader clearance circle, bucket in
carry position
45 ft. 4 in.
45 ft. 2 in.
45 ft. 10 in.
46 ft. 1 in.
45 ft. 10 in.
45 ft. 1 in.
(13 965 mm)
(14040 mm)
(13 980 mm)
(13 738 mm)
(13 824 mm)
(13 762 mm)
51,510 lb.
51,620 lb.
Operating weight
51,590 lb.
51,895 lb.
52,030 lb.
51,210 lb.
(23 365 kg)
(23415 kg)
(23 400 kg)
(23 540 kg)
(23 600 kg)
(23 230 kg)
'Dump clearance height and reach for the material-handling bucket are determined with a 40-degree bucket dump angle.
Loader operating information is based on machine with all standard equipment; 26.5-25, 20 PR L3 tires; ROPS/FOPS cab; 175-lb. (79 kg) operator; and full fuel tank.
This information is affected by tire size, ballast, and different attachments.
Ii
rl
II
'1
!I
II
'II
,I
II
II
jl
,11
:1
I
I
1
2
~
Ii
"'1I~HI\IIH. ADJUSTMENTS
TOOPERATING
WEIGHTSFORPIN.ONBUCKETS
Adjustments
to operating
weights and tipping loads for 5.75 cu. yd. (4.4 m3) material-handling
Add(+)or deduct(-) lb.(kg)asindicated
forloaderswith
OperatingWeight
23.5-25,XHATL3Michelin Radial
26.5-25,16PRL2
26.5-25,GP-2BL2 Goodyear Radial
26.5-25,XHATL3Michelin Radial
26.5-25,X-MINEMichelin Radial
CaCl,in rear tires
TippingLoad,Straight
- 375 lb. (-170 kg)
-258 lb. (-117 kg)
+ 273 lb. (+ 124 kg)
+ 273 lb. (+ 124 kg)
+ 1,956lb. (+ 887 kg)
+ 3,947 lb. (+ 1790 kg)
551 lb. (- 250 kg)
375Ib.(-170kg)
+ 397 lb. (+ 180 kg)
+ 397 lb. (+ 180 kg)
+ 2,875 lb. (+ 1300kg)
+ 2,875 lb. (+ 1300kg)
bucket with bolt-on cutting edge
TippingLoad,
TippingLoad,
35-Degree
Full Turn
40-Degree
Full Turn
- 342 lb. (-155 kg)
- 331 lb. (-150 kg)
-227 lb. (-103 kg)
-222 lb. (-101 kg)
+ 240 lb. (+ 109 kg)
+ 234 lb. (+ 106 kg)
+ 240 lb. (+ 109 kg)
+ 234 lb. (+ 106 kg)
+ 1,742 lb. (+ 790 kg)
+ 1,689lb. (+ 766 kg)
+ 3,506 lb. (+ 1590 kg)
+ 3,396lb. (+ 1540kg)
744H MH BUCKETSELECTION
GUIDE"
MATERIAL
(loose weight)
6.5
(5.0)
6.0
(4.5)
5.5
(4.2)
5.0
(3.8)
4.5
(3.4)
4.0
(3.0)
3.5
(2.7)
3.0
(2.3)
IIb./cu.yd.
kg/ro'
'Ib./cu. yd. kg/m3
2,100 1250
1,000
590
2,400 1420
2,600 1540
2,500 1480
2,800 1660
Clay,naturalbed
2,800 1660
Clay,wet
Coal,anthracite,broken
1,850 1100
Coal,bituminous,broken
1,400
830
2,550 1510
Earth,dry,packed
2,100
1250
Earth,loam
2,700 1600
Earth,wet,excavated
2,800 1660
Granite,brokenor largecrushed
2,550 1510
Gravel,dry
Gravel,dry 1/2"to 2"(13to 50 mm) 2,850 1690
3,250 1930
Gravel,pit run(graveledsand)
Gravel,wet 1/2"to2" (13t050 mm) 3,400 2020
2,700 1600
Gypsum,crushed
2,600 1540
Limestone,brokenor crushed
4,700 2790
Magnetite,ironare
2,160 1280
Phosphaterock
4,350 2580
Pyrite,ironare
2,900 1720
Sandandgravel,dry
3,400 2020
Sandandgravel,wet
2,400 1420
Sand,dry
Sand,wet
3,100 1840
2,550 1510
Sandstone,broken
Shale
2,100 1250
2,950 1750
5,500
Slag,broken
'" ~" Stone,crushed
2,700 1600
1,600
950
Torsoil
3301!!
Caliche
Cinders
Clayandgravel.
dry
Clayandgravel,
wet
Clay,
dry
2,000
,.
1200
2,500
,II",
1500
3,000
'ii,!I,
1800
3,500
"ii!,
2100
4,000
,.
2400
.
4,500
5,000
"'.,
2700
3000
'This guide, representing bucket sizes not necessarily manufactured by Deere,will heip you in selecting proper bucket size tor material density, loader configuration, and operating conditions, Optimum bucket size
is determined after adding or subtracting all tipping ioad changes due to optional equipment. The "conservative load" line on this guide is recommended when operating in conditions such as soft ground and unlevel
surfaces, The "maximum load" condition on this guide is sometimes utilized when operating on firm ground and level surfaces.
I