Service Manual - Casablanca Fan Repair

- Oscillating Floor Model Fan
Service Manual
Section - VI.
Owner’s Manual
IX - 6.0
761 Corporate Center Dr. • Pomona, CA 91746 • (909) 689-1477 • (800) 498-8482
FILE NAME ( SM_ZEPHAIR FLOOR FAN ) RAS 4-13-04
O WNER ’ S
M ANUAL
- Oscillating Floor / TABLEModel Fan
IX - 6.1
761 Corporate Center Dr. • Pomona, CA 91746 • (909) 689-1477 • (800) 498-8482
FILE NAME ( SM_ZEPHAIR FLOOR FAN ) RAS 4-13-04
CAUTION: Read and follow all instructions before
operating the fan. Do not use the fan if any part is
damaged or missing.
WARNING: To reduce the risk of fire or electric shock,
do not use this fan with any solid state speed control
device.
READ & SAVE THESE INSTRUCTIONS
SAFETY FIRST
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
Never insert fingers or any other objects through the cage guard when the fan is in operation.
Close supervision is necessary when any appliance is used by or near children.
Disconnect the fan when moving from one location to another.
Disconnect the fan when removing grill guard for cleaning, servicing, maintenance, and before moving to another location.
Be sure the fan is on a stable, flat surface when in operation.
DO NOT use the table fan in windows. Rain and moisture may create an electrical hazard.
DO NOT operate fan in the presence of explosive and/or flammable fumes.
DO NOT place fan or any parts near an open flame, cooking or other heating appliances.
DO NOT operate any appliance with a damaged cord or plug, after the appliance malfunctions, or has been dropped or
damaged in any manner.
To disconnect, grip the plug and pull from wall outlet. Never pull on the cord.
To protect against electrical shock, do not immerse the fan, plug, or cord in water or spray with liquids.
DO NOT put fan in a damp place or where humidity is high, such as a bathroom.
DO NOT use near curtains, plants, window treatments, et cetera.
This appliance has a grounded three-prong plug and is suitable for grounded receptacle use only. An adaptor is available
from your local hardware store for connecting three-prong grounding-type plugs to two-slot receptacles. The adapter must be
properly grounded. DO NOT attempt to defeat the purpose of this safety feature.
Improper installation may result in a risk of fire, electrical shock, or personal injury.
ALWAYS use on a dry surface.
Use fan only for intended use.
This product is intended for household use only and not for commercial or industrial use.
ASSEMBLY INSTRUCTIONS
Table & Desk Fan: No assembly required. Please skip to the
Important Saftey Instructions below.
Floor Fan:
1. Make sure you are familiar with the 3 components: Motor
Cage Assembly, Pipe Assembly, and Base Assembly.
2. Lay the Motor Cage Assembly on a flat, protected surface,
face down.
3. Take the Pipe Assembly and make sure that the collars on
both ends are pulled in enough to expose the notch in the
pipe.
4. Take the cord from the Motor Cage Assembly and feed it
through the pipe (both ends are the same). Make sure the
plug clears the end of the pipe.
5. Align the pipe collar onto the neck post of the Motor Cage
Assembly, sliding the tab of the motor cage into the notch of
the pipe.
6. Thread the collar and turn the until it is snug.
7. Lay the base of the fan on it’s side close to the pipe. The
Step 5
TAB
NOTCH
Step 5
IX - 6.2
Assembly instructions.
761 Corporate Center Dr. • Pomona, CA 91746 • (909) 689-1477 • (800) 498-8482
FILE NAME ( SM_ZEPHAIR FLOOR FAN ) RAS 4-13-04
(Continued) -
Assembly instructions. (Continued)
-
male pin connector is on the neck of the base, note that one side has a locking tooth.
8. Assure that the latch and locking tooth are matched up and plug the wire from the pipe into the fan base.
Move the collar away from the end and slide the pipe onto the fan base, but do not tighten the collar yet.
9. With one hand hold the handle of the motor cage and with the other hold the neck of the base and tilt the fan
up to a standing position.
10. Align the tab from the base to the notch in the pipe. Thread and tighten the collar for the base of the fan,
tighten completely.
11. Set the floor fan up where the cord will not be in a traffic area or tripped on. Also make sure the oscillation
movement of the cage is not impeded in any way.
NOTCH
TAB
Step 9
Step 10
Step 8
OPERATING INSTRUCTIONS
1. Place the fan on a safe, flat surface where it cannot fall or be pulled
by the cord.
2. Plug the fan into a grounded outlet.
3. To set the horizontal direction of airflow, hold the fan housing neck
in one hand, make sure the oscillating knob is in the up position and
then turn the cage left or right.
4. To control the vertical direction of airflow, grip the handle on top of
the fan tightly and loosen the wing nut on the side of the fan housing
neck. Adjust to the desired angle and tighten the wing nut.
5. To make the fan oscillate, push down on the oscillating knob located
on the top of the fan housing, near the handle. To stop the fan from
oscillating, pull up on the oscillating knob.
IX - 6.3
Operationg Instructions. (Continued)
761 Corporate Center Dr. • Pomona, CA 91746 • (909) 689-1477 • (800) 498-8482
FILE NAME ( SM_ZEPHAIR FLOOR FAN ) RAS 4-13-04
-
Operationg Instructions. (Continued)
-
FOR TABLE & DESK
FAN:
FOR FLOOR FAN:
6a. To sleect a speed on the table model move
the switch lever located on the base of the
fan from OFF to the desired speed setting of
1 (low), 2 (medium) or 3 (high).
6b. To select a speed on the floor model, move
the switch knob located on the back of the
motor housing from OFF to the desired speed
setting of 1 (low), 2 (medium) or 3 (high).
SCREWS
Table & Floor Fan Only
7. OPTIONAL: To store the excess cord, unplug
the fan from the wall socket and gently lay
the fan on its side, making sure that the cage
and motor are properly supported. To remove
the base bottom unscrew all of the screws.
Remove the cord restraint screw. Gently pull
the cord through the bottom rubber bushing
(assuring it remains in place) and through the
cord restraint until you have the desired
length. If the rubber bushing in the base has
come loose, reinstall it into the base of the
fan. Re-align the cord restraint to the proper
position to reattach it to the base with the
screw. Feed the excess cord into the neck of
the base. For the table fan, keep it away from
the speed switch assembly. Replace the base
bottom, aligning the screw holes and reinstall
the screws, assuring that no wires or cord
are pinched.
RUBBER
BUSHING
SPEED
SWITCH
ASSEMBLY
CORD
RESTRAINT
CORD
RESTRAINT
SCREW
USER MAINTENANCE & CLEANING
This fan is permanently lubricated and will not require additional lubrication (oil) for the life of the fan. This appliance
requires little maintenance and contains no user serviceable parts. Do not try to fix it yourself. Call toll free 1-888-227-2178
and ask a technician for the closest Authorized Casablanca Service Center or visit our web site at
www.CasablancaFanCo.com, click on ‘Dealers’ then follow the directions (making sure to select ‘Service Center’ in
option 3).
TO CLEAN: Before cleaning, turn off the fan and unplug from electrical outlet. Wipe off excess dust with a lint-free
cloth. To ensure adequate air circulation to the motor, keep vents located at the rear of the motor housing free from
dust accumulation. A vacuum cleaner hose can be used to clear these vents. Do not immerse the fan in water or any
other liquid.
WARNING: DO NOT OPERATE
FAN WHILE CAGE IS REMOVED
FOR CLEANING!
IX - 6.4
User Maintenance & Cleaning. (Continued)
761 Corporate Center Dr. • Pomona, CA 91746 • (909) 689-1477 • (800) 498-8482
FILE NAME ( SM_ZEPHAIR FLOOR FAN ) RAS 4-13-04
-
User Maintenance & Cleaning. (Continued)
-
CLEANING GRILL AND BLADES: Turn the fan off and unplug from the wall socket. Carefully remove the 8 nuts
and washers from the back of the grille and set aside in a safe place. The cage and blades may be cleaned with mild
soap and water. Use a soft, slightly damp cloth to wipe the remaining fan parts. Do not allow water or any other liquid
to get into the motor housing or base. Reassemble the fan after the cage and blades have dried completely. To do
so, align the screws to the holes in the back (assuring the Casablanca logo is not rotated), then place washer over
screw and tighten nut as shown above. Do not plug fan into an electrical outlet until it has been fully reassembled.
PRODUCT SPECIFICATIONS
Overall Height
Overall Width
Overall Depth
Safety Cage Diameter
Blade Diameter
Weight
Motor RPM - Low:
Motor RPM - Medium:
Motor RPM - High:
Table Fan
21”
17”
11 5¦16”
15 3¦4”
14 1¦2”
24 lbs
600
800
1200
Floor Fan Desk Fan
54”
16.5”
18”
12.5”
5
11 ¦16”
8”
15 3¦4”
11 3¦4”
14 1¦2”
10.44”
50 lbs
20 lbs
600
710
800
1010
1200
1310
Table Fan
Floor Fan
Desk Fan
Oscillating Sweep Angle
90º
90º
55º
Horizontal Angle
20º
20º
20º
Electrical Cord
9’ 9” cloth-covered
grounded plug
9’ 9” cloth-covered
grounded plug
7’ cloth-covered
grounded plug
Warranty
Lifetime Motor
1 year parts & labor
Lifetime Motor
1 year parts & labor
Lifetime Motor
1 year parts & labor
WARRANTY
STAPLE PROOF OF PURCHASE TO THIS PAGE • KEEP FOR FUTURE REFERENCE
If purchased from our authorized dealer this portable fan is warranted to the original purchaser by
Casablanca Fan Company against defects in materials and workmanship for the following: Lifetime
motor warranty, 1 year Parts and Labor.
During the warranty period we repair, or at our option replace at no charge, a defective product.
HOW TO OBTAIN SERVICE:
CONTACT YOUR DEALER FOR THE NAME OF THE NEAREST SERVICE CENTER or CALL TOLL
FREE 1-888-227-2178.
Do not return this portable fan without approval from Casablanca Fan Company. Should it become
necessary to return your fan to an authorized Casablanca Service Center make sure it is properly packaged
to avoid in-transit damage, which is not covered by this warranty.
This warranty does not apply if the product has been damaged by improper installation, neglect, accident,
misuse, exposure to extremes of heat of humidity, or as a result of service or modification by other than an
authorized Casablanca service center. All costs of installing, removing and reinstalling the product are
the responsibility of the owner. Warranty motor repairs must come back to the factory for replacement.
Casablanca will not pay for shipping charges incurred in sending the defective product from the customer
to Casablanca Fan Co., but will pay for return UPS shipment. No other expressed warranty is given. The
repair or replacement of a product is your exclusive remedy. Any implied warranty of merchantability or
fitness is limited to the duration of this written warranty. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitations may not apply to you. In no event shall Casablanca be liable for
consequential or incidental damages. Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
IX - 6.5
761 Corporate Center Dr. • Pomona, CA 91746 • (909) 689-1477 • (800) 498-8482
FILE NAME ( SM_ZEPHAIR FLOOR FAN ) RAS 4-13-04
Download PDF

advertising