professional 6-in-1 grooming kit

PROFESSIONAL 6-IN-1
GROOMING KIT
Model 7057U
PROFESSIONAL 6-IN-1 GROOMING KIT
The BaByliss For Men Professional 6-in-1 Grooming Kit is a
mains or cordless trimmer with 2 interchangeable cutting heads with
titanium blade technology for all over trimming and grooming of facial,
hygienic and body hair. A 6-position comb guide offers a variety of
shorter lengths with an additional 3 longer length grooming combs.
The storage stand holds the trimmer for easy charging along with the
4 attachment combs.
FEATURES:
• Mains or cordless operational trimmer, with 2 interchangeable
heads, can be used corded for continuous power whilst plugged into
the mains or cordless for total flexibility and control during use.
• Precision Trimmer with titanium blade technology for extreme
precision and sharpness, with 6-position comb guide (1.5-4mm) and
3 grooming comb guides (6, 9, 12mm).
• Nose & Ear Trimmer for the safe and easy removal of unwanted hair.
• Charging and storage stand.
• Cleaning brush.
• Lubricating oil.
• 3 Year guarantee.
INSTRUCTIONS FOR USE:
IMPORTANT! Only use the adaptor and attachments supplied with
this appliance.
Inserting the Adaptor Cord into the Stand
• Remove the trimmer and accessories from the stand.
• Insert the adaptor plug into the hole on the base of the stand and
route the cord through and push firmly into place.
• Should you wish to charge the trimmer without using the charging
stand, simply place the adaptor plug directly into the trimmer unit.
Charging the Appliance
•B
efore using for the first time, the appliance should be fully charged
continuously for 16 hours. This initial super-charge ensures
optimum power performance to ensure smooth fast trimming every
time.
• Ensure the appliance is switched off.
• Insert the appliance into the charging and storage stand.
• Plug the charging unit into a suitable mains socket.
•T
he charging indicator light will illuminate when the appliance is
correctly inserted into the charging stand and connected to the
mains.
• A full charge will supply enough power for 30 minutes of use.
Preserving the Batteries
In order to maintain the optimum capacity of the rechargeable batteries,
the trimmer should be fully discharged and then recharged for 16 hours
every 3 months.
Preparation for Use
•A
lways inspect the appliance before use for noticeable signs of
damage. Do not use if damaged.
•E
nsure the heads are free from hair etc (refer to Cleaning &
Maintenance section for further information).
•E
nsure the appliance is sufficiently charged.
•U
se on clean, dry hair that has been combed until tangle-free.
Changing the Heads
•E
nsure the appliance is switched off.
•T
o remove a head, hold the handle of the appliance with one hand,
hold the head with the other hand and pull the head back and away
from the handle.
•T
o attach a head, ensure the base of the head is seated in the handle
and click into position.
COMB GUIDES
6-Position Comb for Precision Trimmer
• Ensure the trimmer is switched off.
• Attach the Precision Trimmer head.
• Slide the comb guide onto the front of the
trimmer head until the guide can be pushed
no further.
• The comb guide will be set to the shortest of
the six cutting lengths (1.5mm).
• To adjust the cutting length, slide the switch on the back of the comb
guide to the required position. The comb guide has six lengths,
1.5mm, 2mm, 2.5mm, 3mm, 3.5mm and 4mm.
• To remove the comb guide, lift the tab on the back of the comb and
slide upwards off the Precision Trimmer.
Grooming Comb Guides for Precision Trimmer
• Ensure the trimmer is switched off.
• Attach the Precision Trimmer head.
• Slide the desired comb over the trimmer head, pull down over the base of the head and click into
position.
• The comb guides come in 3 different lengths,
6mm, 9mm, and 12mm. The length is determined by the cutting
length visible on the stand above each comb guide.
• To remove the comb, lift the tab on the back of the comb and slide
upwards off the Precision Trimmer.
PRECISION TRIMMER
Using the Precision Trimmer with
6-Position Comb
• Attach the comb guide and select the required
length (1.5-4mm).
• If using more than one cutting length, start with
the longest length first.
• Switch the trimmer on.
• Hold the trimmer with the teeth of the trimmer
pointing upwards, yet flat against the skin.
• Move the trimmer upward and outward through the hair, against the
direction of hair growth.
• To blend-in a shorter length use a smaller comb and use in the same
way as above.
• The trimmer will work most efficiently when cutting through hair at its
own speed.
• Never switch the appliance off whilst in the hair.
• Note: The Precision Trimmer can also be used without a comb guide
and will cut to it’s shortest length of 0.5mm.
Using the Precision Trimmer with Grooming Comb Guide.
• Attach one of the three grooming combs (6mm, 9mm and 12mm).
•If you require more than one cutting length, start with the longest
length first (12mm).
• Switch the trimmer on.
• Hold the trimmer with the teeth of the trimmer pointing upwards, yet
flat against the skin.
• Move the trimmer upwards and outward through the hair you wish
to blend.
• To blend-in a shorter length use a smaller comb and use in the same
way as above.
• The trimmer will work most efficiently when cutting through hair at its
own speed.
• Never switch the appliance off whilst in the hair.
• Note:The Precision Trimmer can also be used without a comb guide
and will cut to it’s shortest length of 0.5mm
To outline using the Precision Trimmer
• Do not attach a comb guide.
• Hold the trimmer upside down with the blade facing downwards, yet
flat against the skin.
• Move the trimmer gently downwards in small strokes around the
edge of the area you wish to outline.
• Having defined the outline, hold the trimmer with the blades pointing
upwards, yet flat against the skin and move the trimmer upwards
against the direction of hair growth. This will trim the unwanted hair
adjacent to the outline.
• Note: The Precision Trimmer can also be used without a comb guide
and will cut to it’s shortest length of 0.5mm.
Nose & Ear TRIMMER
Using the Nose & Ear Trimmer
• For the safe and easy removal of unwanted nose
and ear hair use the rotary trimmer head.
• Switch the trimmer on.
• Insert the trimmer into the nose or ear and gently
move the trimmer in a circular motion.
• Only use the trimmer at the entrance to the ear or
nose. Do not use any deeper, as this could cause
injury.
• Never switch the trimmer off whilst in the nose and ear hair.
CLEANING AND MAINTENANCE
To maintain optimum performance, the appliance should be cleaned
after each use:
• Remove the comb guide after use. Rinse comb guide under running
water and dry thoroughly before storage or use.
• Remove the trimmer head after use. The heads are washable for
easy cleaning.
• Remove from trimmer unit and rinse under running water and dry
thoroughly before storage or use.
• Do not disassemble the blades.
• Periodically, it may be necessary to oil the blades. After cleaning,
attach a trimmer head, switch on and oil the blades using a few drops
of the lubricating oil supplied. Only use the lubricating oil supplied with
the appliance as this is specifically formulated for high speed trimmers
and does not evaporate or slow the blades.
• For instructions on how to re-attach the heads please refer to ‘Changing
the Heads’ section.
SAFE DISPOSAL
To minimise hazards to health and the environment at the end of
this product’s life, laws dealing with Waste Electrical and Electronic
Equipment (WEEE) and The Waste Battery Directive require you to
dispose of this product at a suitable collection facility where it
will be sent for appropriate recycling.
Please contact your local authorities for more details on recycling and
safe disposal of these in your area.
SAFETY CAUTIONS
WARNING! Polythene bags over the product or packaging may be
dangerous. To avoid danger of suffocation, keep away from babies
and children. These bags are not toys.
• Do not use or leave the appliance where it can become wet or where there
is a danger of it falling into basins or other vessels containing water.
• This appliance should only be used as described within this instruction
book. Please retain for reference.
• Do not immerse the appliance in water or other liquids.
• Do not connect the appliance to the mains with wet hands.
• Always inspect the appliance before use for noticeable signs of damage.
Do not use if damaged, or if the appliance has been dropped. In the event
of damage, contact the Conair Customer Care Line (refer to UK After
Sales Service section for further information).
• Do not use the appliance if the lead is damaged. In the event of damage,
discontinue use immediately and contact the Conair Customer Care Line
(refer to UK After Sales Service section for further information).
• Only use the adaptor and attachments supplied with this appliance.
• Always unplug the appliance when fully charged.
• Do not leave the appliance unattended when switched on.
• Do not place the appliance on any surface whilst in operation.
• This appliance should not be used by adults or children whose lack of
experience, product knowledge or disability might cause a hazard, unless
they have been correctly instructed and are adequately supervised.
• Children should always be supervised to ensure that they do not play with
this product.
• Special care is required when using the appliance close to the ears, eyes
and face.
• Always switch off and unplug the appliance when cleaning or when not
in use.
• Allow the appliance to cool before storing away.
• After use, do not coil the cord around the appliance as this may cause
damage to the cord. Instead, coil the cord loosely by the side of the
appliance.
• This appliance complies with the requirements of Directives 2004/108/
EC (Electromagnetic Compatibility) and 2006/95/EC (Electrical Safety of
Domestic Appliances).
UK GUARANTEE
This BaByliss for Men appliance is guaranteed for consumer use for 3
years.
This guarantee covers defects under normal use from date of purchase
and ceases to be valid in the event of alteration or repair by unauthorised
persons. If the appliance does not perform satisfactorily due to
defects in materials or manufacture, it will be repaired or replaced
through Conair UK After Sales Service. The Conair Group Ltd reserves
the right to amend terms and specifications without prior notice.
This guarantee in no way affects your statutory rights.
UK AFTER SALES SERVICE
For further advice on using the appliance, contact the Conair
Customer Care Line on 0870 5 133191 (09:00 to 17:00 Monday to
Friday) or email your enquiry to ukinfo@conair.com.
In Guarantee
Return the product to the Conair Service Centre at the following address:
Conair Service Centre
PO Box 506
Wigan
WN1 9AA
Enclose your name and address, together with proof of purchase and details
of the fault. Conair will either repair or replace the product as appropriate.
Out of Guarantee
Contact the Conair Customer Care Line on 0870 5 133191 (09:00 to
17:00 Monday to Friday) or email your enquiry to ukinfo@conair.com
for details of the standard repair or replacement charge. If you wish
to proceed with the repair or replacement, return the product to the
Conair Service Centre at the following address:
Conair Service Centre
PO Box 506
Wigan
WN1 9AA
Enclose your name and address, together with details of the fault and
a cheque made payable to The Conair Group Ltd.