PanasoniC
Operating Instructions
Blu-ray Disc Player
Model
No.DMP-BD65
DMP-BD655
DMP-BD45
The illustration shows the image of DMP-BD65.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions
reference.
!
H_TrR|
r_
birlk
TM
completely. Please keep this manual for future
AVC !---I
_
If you have any questions contact
Panasonic has determined that
As
ENERGY
this an
product
meetsSTAR®Partnerl
the ENERGY _ STAR ®
guidelines
for energy efficiency.
÷ For Canada only: The word "Participant"
"Partner".
is used in place of the word
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
U.S.A. and Puerto Rico : The warranty can be found on
page 39.
Canada :The warranty can be found
B
_
on page 40.
iiii!
VQT2H86
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit and the applicable safety
instructions listed below. Keep these operating instructions handy for
future reference.
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with dry cloth.
7
Do not block any ventilation openings. Install in accordance with
the manufacturer's instructions.
8
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a
third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories
specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
"WARNING:
"_
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE,
eDO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
eUSE ONLY THE RECOMMENDED
ACCESSORIES.
eDO NOT REMOVE THE COVER (OR BACK);
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
_,, SERVICE PERSONNEL.
CAUTION
CAUTION:
_k
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
exclamation
_The
rTHE
FCC
2
VQT2H86
PERSONNEL.
is
FOLLOWING
APPLIES
ONLY
IN THE
U.S.A.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Responsible Party:
Panasonic Corporation
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer
elephone
ii UTO1
TO QUALIFIED
within
intended to alert the user to the presence of important
operating and maintenance
point
(servicing)
an equilateral
instructions
triangle in
the literature accompanying the appliance.
FCC Caution: To assure continued compliance, follow the attached
installation instructions and use only shielded interface cables when
connecting to peripheral devices.
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
|
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
|
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK|
F ELECTRIC SHOCK OR FIRE HAZARD DUE TO
|
VERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
|
ATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. )
EFER SERVICING
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
,j
IS PRODUCT UTILIZES A LASER.
SE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE
F PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
AY RESULT IN HAZARDOUS RADIATION EXPOSURE.
O NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
*
of North America
Electronics
No.: 1-800-211-PANA
Company
(7262)
Table of contents
Getting started
IMPORTANT
Settings
SAFETY
INSTRUCTIONS
Playback
................
2
Accessory .....................
Unit and media care .............
4
4
Control reference guide ..........
Playable discs/Cards/
USB devices ...................
5
Connections
6
& Settings
STEP1
Connecting
to a TV ......
STEP2
Connecting
to
an amplifier/receiver
STEP3
Connecting
Connecting
[BD655_
......
Setup menu
23
..................
25
Reference
Troubleshooting
guide
..........
29
Messages ....................
Audio Information ..............
31
32
About MP31JPEGIAVCHDI
MPEG2 files ..................
34
Specifications
.................
36
Supplemental
information
Glossary
........
.....................
37
38
Limited Warranty
10
to
an AC power
STEP5
STEP6
9
to a broadband
network _
STEP4
.....
8
menu ................
(ONLYFORU.S.A.AND PUERTORIC0) . . . 39
Limited Warranty
..........
11
(Only for CANADA) .............
Setting ...............
12
Referencia
Reprogramming
the remote control ......
14
40
r&pida en espaSol
(Spanish Quick Reference)
Index ..................
41
Back cover
..........
Playback
Inserting or removing a media
FUNCTIONS menu .............
Playing video contents
Playing still pictures
..........
............
Playing music .................
Linked operations
....
15
15
16
19
20
with the TV
(VIERA Link TM "HDAVI Control TM'') ..........
21
Enjoying VIERA CAST TM
[BD6_;;
.....................
22
3
VQT2H86
Unit and media care
Accessory
Check the supplied accessories
1
before using this unit.
Remote control
_
(N2QAKB000076)
(N2QAKB000078)
1
Audio/Video
cable
•
Clean this unit with a soft, dry cloth
• Never use alcohol, paint thinner or benzine to clean this
unit.
• Before using chemically treated cloth, carefully read the
instructions that came with the cloth.
(K2KA6BA00004)
2
Batteries
1
AC power supply
for remote
control
•
cord
disc
(K2CB2CB00022)
1
_HDMI
Clean the lens with the lens cleaner
cable
Lens cleaner disc: RP-CL720PP (not included)
• This lens cleaner is sold as specific for DIGA, but can be
used on this unit as well.
(K1 HA19DA0005)
The enclosed Canadian French label sheet corresponds to I
(ONLY FOR CANADA)
_
the English display on the front and back side of the unit. ,,)
•
Clean discs
DO
• Productnumberscorrectasof December2009.Thesemay be subjectto
change.
• Do not use AC powersupply cordwithother equipment.
• Onlyfor U.S.A.andPuertoRico:Toorderaccessories,referto "Accessory
Purchases(UnitedStatesandPuerto Rico)"on page39.
Forother areas:Toorderaccessories,callthe dealerfrom whomyou
have madeyourpurchase.
DO NOT
Wipe with a damp cloth and then wipe dry.
•
Disc and card handling
precautions
• Handle discs by the edges to avoid inadvertent
fingerprints on the disc.
• Do not attach labels or stickers to discs.
|
Insert so the poles (+ and
control.
) match those in the remote
scratches or
• Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
• Clean any dust, water, or foreign matter from the terminals
on the rear side of the card.
• Do not use the following discs:
- Discs with exposed adhesive from removed stickers or
labels (rented discs etc).
- Discs that are badly warped or cracked.
- Irregularly shaped discs, such as heart shapes.
R6/LR6, AA
(Alkaline or manganese
batteries)
Point it at remote control signal sensor on this unit. (_ 5)
Mishandlingof batteriescan causeelectrolyteteakagewhich can damage
itemsthe fluid contactsand may causea fire.
• Do not mixotd and newbatteriesor different typesat the sametime.
• Do not heator exposeto flame.
• Do not leavethe battery(ies)in an automobileexposedto direct sunlight
for a long periodof time with doorsand windowsclosed.
• Do not take apartor shortcircuit.
• Do not attemptto rechargeatkalineor manganesebatteries.
• Do not use batteriesif thecoveringhas beenpeetedoff.
Removebatteriesif the remotecontrolis not goingto be usedfor a tong
periodof time. Storeina coot,dark place
Danger of explosion if battery is incorrectly replaced. Reptace only with
the same or equivalent type recommended by the manufacturer.
ICAUTION
1
Dispose of used batteries according to the manufacturer's instructions.
4
VQT2H86
•
To dispose
or transfer
this unit
The unit may keep the user settings information in the unit. If
you discard this unit either by disposal or transfer, then follow
the procedure to return all the settings to the factory presets to
delete the user settings. (o29, "To return all settings to the
factory preset.")
• The operation history may be recorded in the memory of
this unit.
Control reference guide
1
2
12
Turn the unit on and off (=> 12)
TV operation buttons (_ 14)
You can operate the TV through the unit's remote control.
[(b TV POWER] : Turn the television on and off
[INPUT] : Input select
BD45
3
[÷
VOL] : Adjust the volume
[A v CH] : Channel select
Select title numbers, etc./Enter numbers or characters
_
(_ 22)
[CANCEL] : Cancel
4
Show playback menu (_ 23)
5 Switch on/off Secondary Video (Picture-in-picture)
6
Basic playback control buttons (_ 16)
7 Show status messages (_ 16)
8 Show Pop-up menu (_ 16)
9
Show Top menu/Direct Navigator (_ 16)
10 Showsub menu (_ 17)
11 These buttons are used when;
7
8
• Operating a BD-Video disc that includes Java TM
applications (BD-J).
• Displaying "Title View" and "Album View" screens.
(_ 19)
• Operating contents of VlERA CAST. (_ 22)
12 Transmit the remote control signal
13 Open or close the disc tray (_ 15)
CAUTION
-18
-19
9
-20
17
18
Do not place objects in front of the unit. The disc tray may
collide with objects when it is opened, and this may cause
injury.
Adjust the volume of an amplifier/receiver.
Select audio (_ 17)
Select drive (BD/DVD/CD, SD card or USB device [BD65;;
_)
(_ 15)
Displays the Home screen of the VIERA CAST (_ 22)
Exitthe menu screen
19
20
21
22
23
Show FUNCTIONS menu (_ 15)
Selection!OK, Frame-by-frame (_ 16)
Return to previous screen
Reproduce more natural audio (_ 17)
Switch on!off Secondary Audio (_ 18)
-21
10
11
14
15
16
3
I
6
1
POWER button
2
3
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Disc tray(_
15)
Display
Disc indicator
(POWER
(b/I) (_ 12)
SD card indicator
(_ 18)
USB device indicator
4
5
6
7
8
9
45
8 9
Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20 ° up and down, 30 o left and right
Open or close the disc tray (_ 15)
SD card slot (=> 15)
_
IBD655
USB port (_ 15)
Stop(_
16)
Start play(_
16)
Rear panel terminals (_ 8-11)
The indicator blinks when reading data from a disc, a card
or a USB device, or writing data to a card.
5
VQT2H86
Playable discs/Cards/USB
....
_
devices
BD-Video
Video
BD-RE
Video
JPEG
BD-R
Video
DVD-Video
Video
VHDIEO
Video
RAM
DVD-RAM
AVCHD
JPEG
......
DVD-R
iii!i ii
Video
AVCHD
MP3
JPEG
DVD-R DL
_iii!_ii _i
R DL
DVD
Q
DVD-RW
Video
AVCHD
RW
+R/+RW/+R DL
Music CD
Music [CD-DA]
CD-R
CD-RW
Music [CD-DA]
MP3
JPEG
SD Memory Card (8 MB to 2 GB)
(Includes miniSD Card and microSD Card)
SDHC Memory Card (4 GB to 32 GB)
(Includes microSDHC
Card)
SDXC Memory Card (48 GB, 64 GB)
(Includes microSDXC
Card)
USB devices
(up to 128 GB)
6
VQT2H86
MPEG2
AVCHD
JPEG
MP3
JPEG
•
Discs that cannot be played in this unit
Any other disc that is not specifically
previously described.
• 2.6 GB and 5.2 GB DVD-RAM
supported
•
•
•
•
DVD-RAM that cannot be removed from cartridge
Super Audio CD
Photo CD
DVD-Audio
•
•
•
•
•
•
Video CD and Super Video CD
WMA discs
DivX discs
PAL discs
HD DVD
BD-Video discs recorded at a rate of 50 fields/sec
or
•
• MiniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used, but
•
•
•
•
•
Region management
information
•
BD-Video
This unit plays BD-Video marked with labels containing
region code A.
Example:
SD card
the
must be used with an adaptor card. These are
usually supplied with such cards, or otherwise
customer provided.
Keep the Memory Card out of reach of children
to prevent swallowing.
To protect the card's contents, move the record prevention
tab (on the SD card) to "LOCK".
This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format (Does not support
long file name.) and SDXC Memory Cards in exFAT.
If the SD card is used with incompatible computers or
devices, recorded contents may be erased due to the card
being formatted etc.
Useable memory may be slightly less than the card
capacity.
• _
_
USB device
• This unit supports connecting a USB memory, digital
camera and video camera produced by Panasonic, etc. It is
not warranted that all USB devices will work with this unit.
• This unit does not support USB device charging.
• FAT12, FAT16 and FAT32 file systems are supported.
• This unit supports USB 2.0 High Speed.
DVD-Video
This unit plays DVD-Video marked with labels containing
region number "1" or "ALL".
Example:
the
•
It may not be possible to play the above media in some cases due to the
type of media, the condition of the recording,
the recording
method and
how the files were created.
• The producersof the disccan controlhowdiscs are played,soyou may
not always be able to controlplay as describedinthese operating
instructions.Readthe disc's instructionscarefully.
•
Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by
a recorder, etc. needs to be finalized by the recorder to play
on this unit. Please refer to the recorder's instructions.
•
BD-Video
This unit supports high bit rate audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD
Master Audio) adopted in BD-Video. In order to enjoy these
audio formats, refer to page 32.
•
Music CD
• Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
• The digital audio content side of a DualDisc does not meet
the technical specifications of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.
7
VQT2H86
STEP 1 • Connecting to a TV
• _
[BD45 : Please use High Speed HDMI Cables that
have the HDMI logo (as shown on the cover). It is
• Do not place the unit on amplifiers/receivers
or equipment
that may become hot. The heat can damage the unit.
• Before making any connections we suggest you temporarily
disconnect all the units from AC power.
• Do not connect video signals through a video recorder. Due
recommended that you use Panasonic's HDMI cable. When
outputting 1080p signal, please use HDMI cables 5.0
meters (16.4 ft) or less.
to copy guard protection the picture may not be displayed
properly.
• Refer to page 33, about recommended settings for each
Recommended part number:
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
IBD655 : Do not use any other HDMI cables except the
piece of connected equipment.
•
supplied one.
Highest Quality
(VIDEO)
•
Standard
(VIDEO)
Via an HDMI AV OUT terminal
•
_
_Via
COMPONENT
terminal
Compone_
HDMI cable
included
Video cable
a
VIDEO OUT
[BD655
and "HDMI Audio
Output" to "On" (_ 27).
8
VQT2H86
Via a VIDEO OUT terminal
Audio/Vide
_
cable
__ca
ii
in DMP-BD655)
• The HDMI connection supports
VIERA Link "HDAVI Control" (_ 21 )
when used with a compatible
Panasonic TV.
• Set "HDMI Video Mode"
•
• Connect terminals of the same color.
• Set "Component Video Resolution" to
"480p", "720p" or "1080i" (_ 27).
• Set "HDMI Video Mode" to "Off"
(_ 27).
Quality
Audi°/vide°
ble (included)
• Connect terminals of the same color.
STEP 2 " Connecting to an amplifier/receiver
|
•
Via an HDMI AV OUT terminal
Via an OPTICAL
terminal
Amplifier/receiver
L
__-_
speakers
Multi channel
2J
HDMI cable
_
Optical cable
Amplifier/receiver
_
• The HDMI connection
HDMI cable
"[_"
(Only included
_--
in DMP::D655)
supports VIERA Link "HDAVI
Control" (_ 21) when used with a compatible
TV.
• Set "HDMI Video Mode" _
_
Panasonic
and "HDMI Audio
• When connecting
a TV (_ 8) with HDMI AV OUT terminal,
set "HDMI Audio Output" to "Off" (_ 27).
• Set "Digital Audio Output" depending on the connected
amplifier/receiver (_ 26).
Output" to "On" (_ 27).
• Set "Digital Audio Output" depending on the used terminal
and connected amplifier/receiver (_ 26).
9
VQT2H86
STEP 3 • Connecting to a broadband network
The following services can be used when this unit is
connected to broadband•
• Firmware can be updated (_ 14)
• You can enjoy BD-Live (_ 18)
• You can enjoy VIERA CAST (_ 22)
•
Using LAN (ethernet)
cable
For details about connection
oo0,,
method, refer to the instructions
supplied with the connected equipment.
• It may not work properly depending on the equipment
environment used.
•
or
Using Wireless LAN Adaptor DY-WL10
(optional)
Front of the unit
Pull to flip down
the front panel.
Wireless LAN Adaptor
|
•
Wireless
router
(Access point), etc.
WAN
WAN
_-
[
(Broadband)
*Provided by ISP
1
...................
__
Modem
LAN
3
2
4
I
1
LAN Cable
Modem
(Broadband)
*Provided by ISP
• Use shielded LAN cables when connecting to peripheral
devices.
• Only the Wireless LAN Adaptor DY-WL10 (optional) can be
used.
• Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
• When connection conditions are poor, use the USB
extension cable included with the Wireless LAN Adaptor
DY-WL10 (optional).
• Read the operating instructions for the Wireless LAN
Adaptor DY-WL10 (optional) thoroughly when using it.
• For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.co.jp/pavc/global/cs
For additional information about this unit refer to
http://www.panasonic.com/consu
10
VQT2H86
mer/su pport
STEP 4 • Connecting
an AC power
to
AC IN"-"
AC power supply
cord
(included)
To a hous_lseeholdAC outlet
• This unit consumes a small amount of AC power ("Quick
Start": "Off", less than 0.1 W) even when turned off. In the
interest of power conservation, if you will not be using this
unit for an extended period of time, it can be disconnected.
The socket outlet shatt be installed near the equipment and easily
accessible. The mains ptug of the power supply cord shatt remain
readily operable.
To completely disconnect this apparatus from the AC Mains, disconnect
the power suppty cord ptug from AC receptacle.
11
VQT2H86
STEP 5 " Setting
|
After connecting your new player for the 1st time and pressing
the power button, a screen for the basic settings will appear.
1 Select
Preparation
Turn on the television and select the appropriate
input on the television.
1
After completing "Easy Setting", you can continuously perform
"Network Easy Setting".
• Before you perform the wireless network settings on this
unit, confirm the set up of your Wireless router (Access
point) is done correctly on your PC.
video
or "Wireless"
and press
[OK].
Press [_ POWER].
A settings
(
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
check
for home
network
and
!ntern_t
connections
is now being conducted.
i
LAN cable connection:
Connect a LAN cable to the unit and select '!Wired.!'
Wireless
LAN connection:
insert a compatible
Wireless
LAN Adaptor to USB port
and select "Wireless.
_
then the setting information on the TV is acquired by this
TV.
2
"Wired"
Wired
Follow the on-screen instructions
and
make the settings with [A, V] and press
[OK].
_
2
• After completing
"Easy Setting", you can
perform "Network Easy Setting".
Follow the on-screen instructions
make the settings with [A, V, _1, I_] and
press [OK].
For wireless
• Youcan performthis setup anytimeby selecting"EasySetting" inthe
Setup menu.(=> 28)
and
LAN connection:
If you are using a Wireless router (Access point) that supports
WPS, you can easily perform the settings by selecting "WPS
(PUSH button method)".
Otherwise, perform the settings by selecting "Search for
access point" or "Manual setting" in "Other methods".
• WPS (Wi-Fi Protected Setup) is a function that facilitates
settings relating to the connection and security of wireless
LAN devices. To see whether your Wireless router (Access
point) supports WPS, check the Wireless router operating
instructions.
12
VQT2H86
1. LAN cable connection
When you experience
problems with settings
Connection
Setting
: Fail
to gateway
1. LAN cable connection
Connection
: Fail
or
: Pass
to access point
2. IP address setting
: Pass
3. Connection
: Fail
Network
Yes
: Pass
2. IP address setting
3. Connection
Access Point Connection
or
to access point
to gateway
Easy Setting
(Internet
Connection
• Connection
and settings
of the hub
and router
• Settings of
"IP Address/
DNS
Settings"
(_ 28)
Check)
No
- Connection
Failed
Cannot
A conflict with another
• Please wait a few moments,
device occurred,
and then try again.
A time out error occurred.
Setting of the Wireless
router (Access point) for
MAC Address etc.
to the Interest
the connection
:
Fail(Error
code:
B0! 9)
test.
find th e server,(Error
Please refer to the operating
of the error and the solution
Press [OK].
code:
B019)
instruct!ons
for it.
for the cause
• The signal may be weak.
Using the USB extension
cable included with the
An authentication error or a
time out error occurred.
Wireless LAN Adaptor,
adjust the position of the
Wireless LAN Adaptor.
• The SSID and the
encryption key of the
Wireless router (Access
point).
• Please wait a few moments,
Cannot find the server.
(Error code: B019)
Failed to connect to
the server.
(Error code: B020)
• Settings of "IP Address/DNS
Settings" (_ 28)
• The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
• Settings of "Proxy Server
Settings" (_ 28) and the router
and then try again.
• Connection of Wireless LAN
Adaptor
If there is no improvement in
symptom, contact our
Customer Service Center.
A device error occurred.
Network
Easy Setting
I. LAN cable
2. IP address
3. Connection
connection
setting
to gateway
Please check
the connection.
(Connection
Check
: Fail
; Fail
: Fail
• Refer to the operatinginstructionsof thehub or router,
• Youcan performthis setup anytimebyselecting"NetworkEasySetting"in
the Setup menu.(_:>28)
• Youcan redo these settingsindividuallyusing "NetworkSettings",(_:>28)
• If you experience
problems
after selecting
"Wireless",
you should
first confirm the setting of your Wireless router (Access point)
connected to your home network using your PC.
• After performingnetworksettingson this unit, the settings(encryption
level,etc.) of theWirelessrouter (Accesspoint)might change.When you
have troublegettingonlineon your PC,performthe networksettingson
your PC inaccordancewith the settingsof Wirelessrouter (Accesspoint).
Select "Yes" an d press OK] to check network
connection again. Select"No"
and press [OK]
to finish Network Easy SeIting,
Yes
No
1. LAN cable connection
Connection
or
to access point
2. IP address setting
Fail
the LAN
cables (_ 10)
Fail
•
3. Connection
to gateway
onnection of
Fail
13
VQT2H86
STEP 6
|
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature operates.
These updates are available free of charge.
Reprogramming
remote control
IBD655 : This unit is capable of checking the firmware
For other Panasonic
automatically when a connected to the Internet via a
broadband connection.
When new firmware
is displayed.
version is available, the following screen
the
products
Change "Remote Control Code" (_ 28) on the main unit and
the remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
You can operate the TV or amplifier/receiver
remote control.
1
using the unit's
For televisions
Input the code (_ 37) with the numbered
buttons while pressing [_ TV POWER],
If you use _
or you use _
and 1BD655
but
downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from
the following website and burn it to a CD-R to update the
firmware.
http://panasonic.co.jp/pavc/global/cs
(This site is in English only.)
To show the firmware version on this unit. (o28,
Information")
"System
• _
_
: Youcan perform updateanytimebyselecting
"FirmwareUpdate"inthe Setup menu.(_ 28)
• Downloadingwill requireseveralminutes.It may take tongeror the
Internetmaynotbeconnecteddepending
on theconnection
environment.
• _
_
: If you do notwant to checkfor the latestfirmware
version,set "AutomaticUpdateCheck"to "Off".(_ 28)
14
Input the code (_ 37) with the numbered
buttons while pressing
[RECEIVER - VOL].
e.g., 0001: [0] =:>[0] =:>[0] =:>[1]
DO NOT DISCONNECT the unit from the AC power or
perform any operation while the update takes place.
After the firmware is installed, "FINISH" will be displayed on
the unit's display. Unit will restart and the following screen will
be displayed.
VQT2H86
For amplifiers/receivers
2
Test by turning
adjusting
receiver,
on the television
the volume
or
of the amplifier/
• If yourtelevisionor amplifier/receiverbrand has morethan onecode
tisted,select the onethat allowscorrectoperation.
Inserting or removing a
media
FUNCTIONS menu
Major functions of this unit can be operated from the
FUNCTIONS menu.
Press [A
V] to select the item and press [OK],
=°_'°'-=_°=
'!°°7__!_'_'_
Biu-ray Disc Player
FUNCTIONS
8D-Video
Playback
• When inserting a media, ensure that it is facing the right
way up.
• When indicator on this unit's display blinks, do not turn off
the unit or remove the media. Such action may result in loss
of the media's contents.
J
Playback
Play back the contents.
Top Menu
(_ 16)
Menu
(_ 16)
• When removing the SD card, press on the center of the card
and pull it straight out.
• _
_
: If you connect a Panasonic product with a
USB connection cable, setup screen may be displayed on
connected equipment. For details, refer to the instructions
for the connected equipment.
Viewing
• To switch drives
SD Card
Picture
(_ 19)
Viewing Video
(_ 16)
Listening
(_ 20)
Network
Music
_
_
Displays the Home screen of
the VIERA CAST (_ 22)
BD/DVD/CD
Switches to each drive.
USB device _
Press [DRIVE SELECT] to select "BDIDVDICD",
"SD card"
or "USB device" _
_,
• If a media is inserted while the unit is stopped, the drive
switches automatically depending on the inserted media.
You can play playlists created
on DVD-VR.
Playlists
Other
Functions
Setup
(_ 25)
Card
Management
(_ 18)
To exit the screen
Press [FUNCTION
MENU].
•
may vary with
Items to be displayed
the media.
• If FUNCTIONSscreen is not displayed,press [FUNCTIONMENU].
15
VQT2H86
Playing video contents
Othe r o pe ratio ns du ri ngplay
These functions may not work depending
contents.
on the media and
....................................
stop
.............................
Preparation
Turn on the television and select the appropriate
on the television.
video input
Press [111.
The stopped position is memorized.
Resume play function
Press [1_] (PLAY) to restart from this position.
• The position is cleared if the tray is opened or you press [11]
several times to display "STOP" on unit's display.
• On BD-Video discs including BD-J (_ 38), the resume
play function does not work.
.......................................
Pause ............................................................
1
Press [(_ POWER] to turn on the unit.
2
Insert the media.
Play starts.
• If the menu is displayed, press [A, T, <, I_] to select
the item and press [OK].
• If play does not start, press [1_] (PLAY).
•
You can show Top Menu, Direct Navigator or Pop-up Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP
MENU].
• Press [A, T, <, I_] to select the item and press [OK].
• Pop-up menu also appears by pressing [SUB MENU] and
selecting "Pop-up Menu".
To show the status messages
While playing, press [STATUS].
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
information displayed will change.
T: Title, C: Chapter, PL: Playlist
Current position
CONTINUE
16
• Press [1_] (PLAY) to revert to normal playback speed.
Skip
While playing or paused, press [I_ ] or [I_ ].
Skip to the title, chapter or track you want to play.
• Each press increases the number of skips.
Frame-by-frame
TO ROTATE
Total time
WHILE
MENUS
ARE
(411) or [1_] (I I1_).
forward or
• Press [1_] (PLAY) to revert to normal playback speed.
• BD-Video and AVCHD: Forward direction [1_] (! 11_) only.
DISPLAYED.
Press[11]whenyou finishto preservethe unit's motorand yourtelevision
screen.
• Dependingon mediaand contents,the display may changeor may not
appear.
• It is not possible to playback AVCHDand MPEG2videowhich have
been dragged
and dropped,
copied and pasted to the media.
VQT2H86
The speed increases up to 5 steps.
• Press and hold to change in succession
backward.
time in the title
DISCS
or [IH_].
While paused, press [44] or [1_1_].
• BD-Video and AVCHD: Forward direction [IH_] only.
While paused, press [4]
e.g.BD-Video
•
Search
While playing, press [44]
• Music and MP3: The speed is fixed to a single step.
Slow-motion
To show menus
•
Press [I I],
• Press [! 1] again or [1_] (PLAY) to restart play.
i....................................
Changing dud! o.............................................................................................................................
Press [AUDIO].
You can change the audio channel number or soundtrack
language (_ 23), etc.
Enhancing the brilliance of
audio playback
(Discs recorded at 48 kHz or less)
I
BD45 : Press [RE-MASTER]
to select an item.
This feature gives you brighter sound by increasing the high
frequency portion of the audio.
Recommended
setting
Re-master
1
Pop and rock
Re.master
2
Jazz
Re-master 3
Classical
• This functionis effectivefor audio fromthe HDMIterminalor theOPTICAL
terminal only when "Digital Audio Output" is setto "PCM" (_=_ 26).
(However,in this case,audio is outputas 2ch from the OPTICAL
terminal.)
Press [SUB MENU].
2
Select an item, then press [OK].
While Direct Navigator screen is displayed
Pr0Pe_ies
To display the titles properties (recording
date, etc.)
View
Chapters
To select the chapter
To p cture
Playing still pictures (<_ 19)
While playing
Screen
AsPect
When black bars are shown at the top,
bottom, left, and right sides of the screen, you
can enlarge the image to fill the screen.
Top Menu
To display Top Menu.
Pop-up
Menu
To display Pop-up Menu.
Menu
To display Menu.
• Depending on the played contents if you perform "Screen
Aspect", there may be not effect.
• When "TV Aspect" (_ 27) is set to "4:3 Pan & Scan" or "4:3
Letterbox", the "Zoom" effect in "Screen Aspect" is disabled.
• Dependingon the media andcontents,displayeditemsare different.
17
VQT2H86
BONUSVIEW
Enjoying
Internet BD-Live discs with
in BD'Video
What is BONUSVIEW?
Some BD-Live content available on the Blu-ray discs may
require an Internet account to be created in order to access
the BD-Live content. Follow the screen display or instruction
manual of the disc for information on acquiring an account.
BONUSVIEW allows you to enjoy functions such as
picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you
to enjoy more functions such as subtitles, exclusive images
1
Connect
to the
network.
(_
10)
Fire
and online games by connecting this unit to the Internet.
Insert an SD card
• The usable functions and the operating method may vary
SD card is used as the local storage (_ 38).
with each disc, please refer to the instructions
and/or visit their website.
::......................................
Playingpicture-in-picture
To turn on/off secondary
on the disc
3
(with 1 GB or more free space).
Insert the disc.
........................................................................................................
•
Deleting
(_)
@
_)
@
Insert
Press
Press
Press
data/Formatting
SD cards
video
Press [PIP].
Secondary
video
an SD card.
[FUNCTION MENU].
[A, T] to select "Other Functions" and press [OK].
[A, T] to select "Card Management" and press
[OK].
(_) Press [A, T] to select "BD-Video Data Erase" or "Format
SD Card" and press [OK].
D sD card
.........................................................
Frg_s_._c_
300 Me
I
Primary video
To turn on/off secondary
audio
[DISPLAY] :_ select "Disc"
"Signal
Type"
"Secondary
OR
:_ [OK]
Video"
:_ [1_] :_ select
:_ set "Soundtrack"
to "On"
_-
in
or "Off"
_)
O
Press [<,
Press [<,
OK
Format this SD Card
I_] to select "Yes" and press [OK].
I_] to select "Start" and press [OK].
: Press [SECONDARY AUDIO],
•
To use the above
functions,
it is recommended
this unit. If the SD card you use is formatted,
• Duringsearch/slow-motionor frame-by-frame,onlythe primaryvideois
displayed.
• When"BD-VideoSecondary Audio"in "Digital
secondaryaudio will not be played(=>26).
18
VQT2H86
Audio
Output"
is setto "Off',
that you format
all data
the card on
on the card wilt be
erased.It cannotbe recovered.
• "BD-LiveInternetAccess" mayneedto be changed for certaindiscs
(_
25).
• Whendiscs supporting BD-Liveare played back, the player or disc IDs
may be sent to the contentprovidervia the Intemet.
Playing still pictures
(BD-RE, DVD-RAM/-R/-R
USB device)
1 Insert
DL, CD-R/RW, SD Card,
Useful functions
1
Press [SUB MENU].
2
Select an item, then press [OK].
While "Album View" or "Picture View" screen is displayed
a disc, SD card or USB device.
Start
Slideshow
If the menu is displayed, press [A, T] to select the item
and press [OK].
2
Display Interval
Change the display interval.
Transition Effect
BD-RE, DVD-RAM
Press [A, V, <, I_] to select the album
and press [OK].
Slideshow
Settings
2006
9
You can display still pictures one by one at a
constant interval.
12
Set display method.
Repeat Play
Repeat slideshow.
Soundtrack
The MP3 that is recorded on the USB device
or the music CD can be played back as
Background
Soundtrack
Music during the slideshow.
Folder
A folder to playback can be selected when a
USB device with MP3 recorded is connected
to this unit
Total 13
Press [A, Y, 41, I_] to select "Set"
and
press [OK].
3
Press [A, V, <, I_] to select the still
picture and press [OK].
Select Root
folder
To switch to another higher folder
• Only if there is a multiple number of higher
folders recognizable
Select
Folder
To select the still pictures in another folder
To Video
Playing video contents _q_ 16)
To album
view
To display album view.
While playing (except for slideshow)
Rotate Right
Rotate Left
Press [<,
I_] to display the previous or next still picture.
To exit the screen
Press [TOP MENU/DIRECT
NAVIGATOR].
• To show the picture properties
While playing,
press [STATUS] twice.
e.g. JPEG on DVD-RAM
Shooting date
Rotate the still picture.
Zoom out
Reduce the still picture
• This function is only available for
small-sized still pictures.
Zoom in
Cancel "Zoom out"
• Dependingon the media andcontents,displayeditemsare different.
• When a still picture with large numberof pixets is played, the display
intervalmay becomelonger. Evenif the setting is changed, the display
intervalmay not becomeshorter.
• When boththe music CD and the USBdevicewith MP3recordedis
insertedto this unit, the music CD has a priority to be played back as
BackgroundMusic.
To exit the screen
Press [STATUS].
19
VQT2H86
Playing music
(DVD-R/-R
DL, music CD, CD-R/RW, USB device)
1 Insert a disc or USB device.
If the menu is displayed, press [A,
and press [OK].
2
T] to select the item
Press [&, 5'] to select the track and press
[OK].
4 30
" ,_
•
" indicates the track currently playing.
Playing
a track in another folder
While the "Music list" is displayed
Press [SUB MENU].
2
Press [&, 5'] to select "Select Folder" and
press [OK].
• Youcannotselectfolders thatcontainno compatibletracks.
20
VQT2H86
Linked operations with
the TV
(VlERALinkTM"HDAVlControl
VIERA Link TM is a new name for EZ Sync TM.
VIERA Link "HDAVI Control" is a convenient
remote control
TM')
Only TV supports "HDAVl Control 2" or later
By using the TV remote control, you can play discs using the
"Control Panel" and display the Top Menu or Pop-up Menu,
etc.
function
that offers linked operations of this unit, and a
Panasonic TV (VlERA) or amplifier/receiver
under
"HDAVl Control".
You can use this function by connecting the
equipment with an HDMI cable. See the operating
instructions
for connected equipment for operational
details.
1
Press [SUB MENU].
2
Select an item, then
I Control Panel
I
press [OK].
J
Preparation
_)
Set "VIERA Link" to "On" (_ 27). (The default setting is
"On".)
@ Set the "HDAVI Control" operations on the connected
equipment (e.g., TV).
_) Turn on all "HDAVI Control" compatible equipment and
select this unit's input channel on the connected TV so
that the "HDAVI Control" function works properly.
Also when the connection
or settings are changed,
repeat this procedure.
Automatic
input switching
Power on link
When the following operations are performed, the television
will automatically switch the input channel and display the
corresponding action. When the television is off the television
will automatically turn on.
- When play starts on the unit
- When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
• You cannot use the sub menu
while the Top Menu for BD-Video or DVD-Video is
displayed.
• The buttonsthat you can use for this unit vary dependingon the TV. For
details, referto the operatinginstructionsof the TV.
• The operation ofthis unit may be interrupted whenyou press incompatible
buttonson the TV remotecontrol.
• This unit supports"HDAVIControl5" function.
"HDAVIControl5" is the neweststandard(currentas of December,2009)
for Panasonic'sHDAVlControlcompatibleequipment.This standardis
compatible
with Panasonic'sconventionalHDAVIequipment.
• VIERA Link"HDAVlControl",based on the controlfunctions providedby
HDMIwhich is an industrystandardknown asHDMI CEC(Consumer
ElectronicsControl),is a uniquefunctionthat we havedevelopedand
added.As such, its operationwith othermanufacturers'equipmentthat
supports
HDMICEC cannotbe guaranteed.
• Pleasereferto individualmanualsfor other manufacturers'equipment
supporting
VlERA Linkfunction.
Power off link
All connected equipment compatible with "HDAVI Control",
including this unit, automatically turns offwhen you switch the
television off.
Playing music continuously
to the television
even after turning
off power
When the unit is connected to a Panasonic TV (VIERA) that
supports HDAVI Control 2 or later and an amplifier/receiver
supports VIERA Link.
While playing music
Press [SUB MENU].
@ Press [A, T] to select "TV Power" and press [OK].
21
VQT2H86
Enjoying VIERA CAST TM
IBD655i
You can access a selection of Internet services from the
Home screen with VIERA CAST, for example YouTube,
Picasa Web Albums. (Current as of December 2009)
Preparation
• Network
connection
• Network
setting
1
12)
Press [VIERA CAST].
Message
carefully
2
(_
(=> 10)
is displayed.
Please
and then press
read these
instructions
[OK].
Press [A, V, <, I_] to select the item and
press [OK].
Operable
buttons:
[A, T, <, I_], [OK],
numbered
buttons
[RETURN],
colored
buttons,
VIERA CAST Home screen;
Images are for illustration purposes, contents may
change without notice.
To return to VIERA CAST Home screen
Press [VIERA CAST].
To exit from VlERA CAST
Press [EXIT], [FUNCTION
NAVIGATOR].
22
VQT2H86
MENU] or [TOP MENU/DIRECT
• In the following cases, settings are possibIe using "lnternet Content
Settings" (_=_28)
- When restricting the use of VIERA CAST.
- When the audio is distorted.
- When wrong time is displayed
• If using slow Internet connection, the video may not be displayed
correctly. A high-speed Internet service with a speed of at least 6 Mbps is
recommended.
• Be sure to update the firmware when a firmware update notice is
displayed on the screen. If the firmware is not updated, you will not be
able to use the VlERA CAST TM function. (_ 14)
• VIERA CAST TM home screen is subject to change without notice.
• The services through VlERA CAST TM are operated by their respective
service providers, and service may be discontinued either temporarily or
permanently without notice. Therefore, Panasonic wilt make no warranty
for the content or the continuity of the services.
• Att features of websites or content of the service may not be available.
• Some content may be inappropriate for some viewers.
• Some content may only be available for specific countries and may be
presented in specific languages.
Playback menu
1 Press [DISPLAY].
Signal Type
Primary Video
e.g., BD-Video
Video
The recording method of original video
appears.
Soundtrack
_1
I
Menus
2
items
!
]
Settings
Press [&, 5'] to select the menu and press
Secondary
Video
4
Video
Select on/off of images. The recording
method of original video appears.
Soundtrack
3
Select the type of audio or language.
Select on/off of audio and the language.
Press [A, V, _1, I_] to select the item and
Video
press [1_].
The recording method of original video appears.
Press
[A, V] to select
the setting.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Depending on the condition of the unit (playing, stopped,
etc.) and media contents, there may be some items that
you cannot select or change.
Regarding Language, Audio attribute and video attribute :
(_ 37)
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending
on the media.
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
(_ 17, "Changing audio")
Angle
Select the number of the angle.
Some items may be changed only on the disc specific menu.
(_ 16)
23
VQT2H86
|
Repeat Play
Sound Effects .1
(Only when the elapsed time is being displayed on the unit's
display.)
Select the sound effect.
Select the item which you want to repeat. The items displayed
differ depending on the type of media.
• Night Surround :
Enjoy a movie with powerful sound even when the volume is
kept low at night. The audio is set in such a way that it can
be heard easily.
Select "Off" to cancel.
Random
Select whether or not to play random.
• Re-master .2 : (_ 17)
Dialog Enhancer .2
The volume of the center channel is raised to make dialog
easier to hear.
*_ Not every function can be set individually.
.2 This function is effective for audio from the HDMI terminal or the OPTICAL
Picture
Select the picture quality mode during play.
• If you select "User", you can make further adjustments.
Press [1_] to select "Picture Adjustment" and press [OK].
•
3D NR:
Reducesthe roughnoise inthe backgroundto give a greaterfeeling of
depth.
When "24pOutput"is setto "On",this functionmay not operate.(_ 27)
• IntegratedNR:
Smoothesblocknoiseand reducesthe smudgingthat appearsaround
contrasting
sectionsof the picture.
Detail Clarity
The picture is sharp and detailed.
Progressive
Select the method of conversion for progressive output to suit
the type of material being played.
• When the content is distorted change the settings from
"Auto" to "Video".
24p
Movies and other material recorded on DVD-Video at 24p are
output at 24p.
• Only when you have selected "On" in "24p Output" (_ 27)
24
VQT2H86
terminal only when "Digital Audio Output" is set to "PCM" (_=_26).
(However, in this case, audio is output as 2ch from the OPTICAL
terminal.)
Setup menu
Change the unit's settings if necessary. The settings remain
intact even if you switch the unit to standby.
1
Set a ratings level to limit DVD-Video play.
• Follow the on-screen instructions. Enter a 4-digit password
Press [FUNCTION MENU] and press
[&, V] to select "Other Functions" and
press [OK].
2
DVD-Video Ratings
Press [&, V] to select "Setup"
and press
[OK].
with the numbered buttons when the password screen is
shown.
BD-Video Ratings
Set an age limit of BD-Video play.
• Follow the on-screen instructions. Enter a 4-digit password
with the numbered buttons when the password screen is
shown.
Disc
Audio Language
Video
Choose the language for audio.
Audio
• If "Original" is selected, the original language of each disc
will be selected.
Disptay
TV / Device Connection
• Enter a code (_ 37) with the numbered buttons when you
select "Other
".
Network
Others
Subtitle Language
Choose the language for subtitle.
3
Press [&, V] to select the menu and press
[OK].
4
Press [&, V] to select the item and press
[OK].
If there are any other items, repeat these steps.
5
Press
and
[A,
press
V,
_1, I_] to select
the
option
[OK],
• If "Automatic" is selected and the language selected for
"Audio Language" is not available, subtitles of that language
will automatically appear if available on that disc.
• Enter a code (_ 37) with the numbered buttons when you
select "Other
".
Menu Language
Choose the language for disc menus.
• Enter a code (_ 37) with the numbered buttons when you
select "Other
".
BD-Live Internet Access _
• There may be differences in operation methods. If this happens, follow the
on-screen instructions for the operation.
About the password
The password of the following items are common.
Don't forget your password.
• "DVD-Video Ratings"
• "BD-Video Ratings"
• "Lock" (_ 28)
_
(_ 18)
You can restrict Internet access when BD-Live functions are
used.
• If "Allow (Limited)" is selected, Internet access is permitted
only for BD-Live contents which have content owner
certificates.
25
VQT2H86
Downmix
I
Video
Select the downmix system of multi-channel
sound.
Still Mode (paused video)
Select the type of picture shown when you pause playback.
Auto
Automatically
Field
Select if jittering occurs when "Auto" is selected.
Frame
selects the type of picture shown.
Select if small text or fine patterns cannot be seen
clearly when "Auto" is selected.
to 2 channel
• Select "Surround encoded", when the connected equipment
supports the virtual surround function.
• There is no effect on "Bitstream" via HDMI AV OUT and
DIGITAL AUDIO OUT.
• The audio will be output in "Stereo" in the following cases.
- AVCHD playback
- Playback of secondary audio (including the button click
sound).
Seamless Play
The chapters segment in playlists are played seamlessly.
• Select "On", when the picture freezes for a moment at the
chapters segment in playlists.
Black Level Control
Select lighter or darker for adjusting the black level control to
the desired setting for picture enhancement.
7.1ch Audio Reformatting _
[BD655;;
Surround sound with 6.1ch or less is automatically
and played back at 7.1ch.
expanded
• If "Off" is selected, sound is played over the original number
of channels. (Note that in the case of 6. lch audio, playback
will be at 5.1ch.)
Audio reformatting is enabled in the following cases:
• When you have selected "PCM" in "Digital Audio Output".
• When the audio is Dolby Digital, Dolby Digital Plus, Dolby
TrueHD or LPCM.
!Audio¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸/¸¸¸¸¸¸¸
!
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
• "Auto" is effective only when playing Dolby TrueHD.
Digital Audio Output (_ 32)
Press [OK] to show the following settings.
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.
• Select "PCM", when the connected equipment cannot
decode the respective audio format,
• Not making the proper settings may result in noise.
BD-Video Secondary
Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (_ 18)
• If "Off" is selected, the unit outputs the primary audio only.
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz for the PCM output from the DIGITAL AUDIO OUT.
• If "On" is selected, the signals that are converted to 48 kHz
are output.
• If "Off" is selected, and the connected equipment does not
support 96 kHz, the sound will not be output normally.
• Signals are converted to 48 kHz despite the settings across
in the following cases:
- when the signals have a sampling frequency of 192 kHz
- when the disc has copy protection
- when "BD-Video Secondary Audio" is set to "On"
26
VQT2H86
Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for these menus and on-screen
messages.
Screen Saver Function
This is to prevent burn-in on the screen.
• When this is set to "On":
If there is no operation for 10 minutes or more, Direct
Navigator screen switches to FUNCTIONS screen
automatically.
• While playing and pausing, etc., this function is not
available.
• As for Music [CD-DA] or MP3, regardless of the setting, if
there is no operation for a while, Direct Navigator screen
switches to the other states automatically.
FL Display
Changes the brightness of the unit's display.
• If "Auto" is selected the display is dimmed during playback
and bright except during playback.
License
Information about the software used by this unit is displayed.
I
HDMI Audio
Output
This setting selects whether or not to output audio from
HDMI.
• Select "Off" when the TV is connected to this unit via an
TV As pect
Set to match the type of television connected.
When connected
ratio image:
HDMI terminal, and this unit is also connected to other
devices, such as an amplifier/receiver
terminal.
to a 4:3 aspect television and playing 16:9
The sides are cut off so
4i3 Pan&
Scan
VIERA Link
the picture fills the screen.
When
playing BD-Video,
video is output as "4:3
Letterbox".
4:3 Letterbox
Black bands appear at the
top and bottom of the
Set to use "HDAVI Control" function when connected with
an HDMI cable to a device that supports "HDAVl Control".
• Select "Off" when you do not want to use "HDAVl Control".
Deep Color Output
_=======m_
'_
This setting is for selecting whether to use Deep Color
output when a television that supports Deep Color is
connected.
picture.
When connected to a 16:9 widescreen
television and
Contents Type Flag
playing 4:3 ratio image:
Depending on the playback content, the TV will output
adjusting to the optimal method when a TV that supports
this function is connected.
Video is displayed as a 4:3 ratio image in the
center of the screen.
16:9
16:9 Full
via an OPTICAL
Video is displayed as a horizontally
stretched
Component
16:9 image.
HDMI Connection
Resolution
_
IBD655;;
• Even if you select "720p" or "1080i", the video output
resolution is restricted to "4SOp" when images of DVD-Video
discs are output from the COMPONENT VIDEO OUT
terminals.
Press [OK] to show the following settings.
HDMI Video Mode _
Video
This sets the video output resolution when connected via the
COMPONENT VIDEO OUT terminal.
1BD655;;
Select "On" when video is output from HDMI AV OUT
terminal.
On
Images are output from the HDMI terminal in the
resolution set in "HDMI Resolution".
Off
Images are output in the resolution set in
"Component Video Resolution".
HDMI Resolution
The items supported by the connected devices are
indicated on the screen as" ". When any item without"
is selected, the images may be distorted.
• If "Auto" is selected, automatically selects the output
resolution best suited to the connected television.
"
• To enjoy high definition video up-converted to 1080p, you
need to connect the unit directly to 1080p compatible
HDTV (High Definition Television). If this unit is connected
to an HDTV through other equipment, it must also be
1080p compatible.
24p Output
When this unit is connected to a TV supporting
1080/24p
output using an HDMI cable, movies and other material
recorded at 24p are output at 24p.
• When playing DVD-Video, set to "On" and then also set
"24p" in "Video" (_ 24) to "On".
• When BD-Video images other than 24p are played,
images are output at 60p.
HDMI RGB Output Range
The signal is enhanced to reproduce clear video, when
connected to a device that only supports RGB output.
27
VQT2H86
|
Others
Off Timer
Network Easy Setting (_ 12)
Select how long the unit remains on when it is not being used.
Network Settings
Perform network-related
Remote Control Code
settings individually.
Change the remote control code, when other Panasonic
products react to this remote control.
Press [OK] to show the following settings.
LAN Connection Mode
Select connection
Quick Start
method.
Access Point Connection Setting
This allows the Wireless router (Access point) and
connection settings to be set and the current connection
settings and connection state to be checked when a
wireless connection is used.
Connection
Setting
The Wireless router (Access point) connection wizard will
be displayed.
IP Address/DNS
Settings
This is for checking the state of the network connection and
setting the IP address and DNS-related.
Press [OK] to show the respective setting.
• "Connection Speed Setting" is enabled only when "Auto
Detect Connection Speed" is turned "Off".
Proxy Server Settings
This is for checking the state of connection
server and performing settings.
Press [OK] to show the respective setting.
with the Proxy
Internet Content Settings (_ 22) (VIERACAST)
Press [OK] to show the following settings.
Speed of startup from power off is increased.
• Internal control unit will be powered when it is set to "On", so
contents of the following will be different from the time it is
set to "Off".
- Idle power consumption
consumption _ 36)
will increase. (about the power
Easy Setting
You can execute basic settings COn-screen
Aspect", "Quick Start")
Language", "TV
Restore Default Settings
This returns all values in the Setup menu and the playback
menu, except for "Remote Control Code", "On-screen
Language", "IP Address/DNS Settings", "Proxy Server
Settings", "Lock" _
_,
"DVD-Video Ratings" and
"BD-Video Ratings" to the default settings.
System Information
Display firmware version of this unit, wireless LAN module of
your Wireless LAN Adaptor _
_.
Firmware Update _
_
(_ 14)
Press [OK] to show the following settings.
Lock
Automatic Update Check
You can restrict the usage of VIERA CAST.
• Follow the on-screen instructions. Enter a 4-digit
password with the numbered buttons when the
password screen is shown.
Audio Auto Gain Control
When this equipment remains connected to the Internet, it
will check for the latest firmware version when it is turned on
Volume that is different depending on the contents is
adjusted automatically to the standard volume while using
the VlERA CAST.
You can update the firmware
• Depending
work.
on contents, this function effect will not
• Select "Off" when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit's
time to match your location.
• Some VlERA CAST contents require the time zone to
be set. Set the time zone if necessary.
DST
Select "On" when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
28
VQT2H86
and you can update it if necessary.
Update Now
manually.
Troubleshooting
guide
Before requesting service, please perform the
following steps.
Do you have the latest firmware installed?
Firmware updates may be released to correct operating
irregularities that are discovered with certain movies.
(_ 14)
To return to the factory preset.
Select "Yes" in "Restore Default Settings" in the Setup
menu. (_ 28)
To return all settings to the factory preset.
Reset the unit as follows:
(_
Make the following checks and visit our
website for more information.
For USA :
@
http://www2.panasonic.com/consumer-electronics/support/
Enter the mode number
For Canada :
While the unit is off, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
- "00 RET" is displayed on the unit's display.
Repeatedly press [1_] (right) on the remote control or
[POWER (b/I] on the unit until "08 FIN" is displayed on the
unit's display.
Press and hold [OK] on the remote control or [__ OPEN/
httD:flwww.panasonic.ca
CLOSE] on the unit for at least 3 seconds.
Even so, you still have trouble.
Power of this unit is turned off when the input
for the TV is switched.
Visit our website to find a service center.
You can find a service center near you easily on our
website.
This is a normal phenomenon
Other support information:
"Customer Services Directory (United States and Puerto
Rico)" (_ 39) or "Limited Warranty (Only for
CANADA)" (_ 40).
The remote control doesn't work properly.
The remote control and main unit are using different
codes. Change the code on the remote control. (_ 28)
It may be necessary to set the manufacturer code or the
remote control code again after changing the batteries for
remote control. (_ 14)
The following do not indicate a problem with this unit:
• Regular disc rotating sounds.
• Image disturbance during search.
•
Unit doesn't
respond to remote control
or front panel buttons.
Press and hold [POWER (b/I] on the main unit for 3 seconds.
- If still unable to power the unit off, disconnect the power
cord, wait 1 minute, then reconnect the power cord.
•
- "00 RET" is displayed on the unit's display.
Repeatedly press [1_] (right) on the remote control or
[POWER (b/I] on the unit until "06 FTO" is displayed on
the unit's display.
Press [OK] on the remote control or [__ OPEN/CLOSE]
the unit.
The TV tuner mode is not displayed when the
TV is switched on.
This phenomenon may occur, depending on the TV
setting, when "Quick Start" is set to "On".
- Depending on the TV, this phenomenon may be prevented
by reconnecting the HDMI cable to a different HDMI input
terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
Cannot eject disc.
The unit may have a problem.
(_ While the unit is off, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
@
when using VlERA Link
(HDAVI Control 4 or later). For details please read the
operating instructions for the TV.
on
(_
@
The ratings level returns to the factory preset.
While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
- "00 RET" is displayed on the unit's display.
Repeatedly press [1_] (right) on the remote control or
[POWER (b/I] on the unit until "03 VL" is displayed on the
unit's display.
Press [OK] on the remote control or [__ OPEN/CLOSE] on
the unit.
29
VQT2H86
Audio
The images from this unit do not appear on
the television.
Picture is distorted.
An incorrect resolution is selected in "Component Video
Resolution" _
_
or "HDMI Resolution". Reset
the setting as follows:
While the unit is on, press and hold [OK], [B] and [Y] on
the remote control at the same time for more than
5 seconds.
- "00 RET" is displayed on the unit's display.
@ Repeatedly press [1_] (right) on the remote control or
[POWER (b/I] on the unit until "04 PRG" is displayed on
the unit's display.
Press and hold [OK] on the remote control or [_ OPEN/
CLOSE] on the unit for at least 3 seconds.
Set the item again. (_ 27)
- When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio
are not output in bitstream, select "Yes" in "Restore Default
Settings" and make proper settings. (_ 28)
Video is not output in high definition.
Confirm that the "HDMI Video Mode" _
_,
"HDMI Resolution", and "Component Video Resolution"
_
in the Setup menu are set properly. (_ 27)
No subtitles.
When progressive output is on, closed captions cannot be
displayed.
The subtitles overlap closed captions
recorded on discs.
Turn off the subtitles or turn off the closed caption setting
on the TV. (_ 23)
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
Confirm the "TV Aspect" is set properly. (_ 27)
Adjust the aspect setting on the television.
(Adjustment using "Screen Aspect" (_ 17) on the unit is
also possible)
Cannot switch audio.
When connecting an amplifier/receiver using an OPTICAL
terminal or an HDMI terminal, you cannot switch the audio
if "Digital Audio Output" is set to "Bitstream". Set "Digital
Audio Output" to "PCM" or connect using AUDIO OUT
terminal. (_ 9, 26)
Cannot hear the desired audio type.
Check the connections
settings. (_ 26)
and the "Digital Audio Output"
To output audio from a device connected with an HDMI
cable, set "HDMI Audio Output" to "On" in the Setup
menu. (_ 27)
Playback
Disc cannot be played.
The disc is dirty. (_ 4)
The contents of the USB device cannot be
read. _
USB devices connected using USB extestion cable other
than the included with the Wireless LAN Adaptor
DY-WL10 (optional) or a USB hub may not be recognized
by this unit.
If inserted during playback the USB device may not be
recognized by this unit.
Still pictures (JPEG) do not play back
normally.
The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
I can't play back BD-Live. _
IBD655;;
The SD card is write-protected. (_ 7)
Confirm that this unit is connected to the broadband
Internet. (_ 10)
Confirm the "BD-Live Internet Access" settings. (_ 25)
Confirm an SD Card is inserted into the SD Card slot.
(_ 15)
I can't connect to the network.
Confirm the network connection and settings. (_ 10, 28)
Check the operating instructions for each device and
connect accordingly.
30
VQT2H86
Messages
PLEASE WAIT
>
The following messages or service numbers appear on the
television or unit's display when something unusual is
The unit is carrying out an internal process. This is not a
malfunction. You cannot operate the unit while "PLEASE
WAIT" is displayed.
detected during startup and use.
REMOVE _
>
I
On the television
Cannot play.
>
You inserted an incompatible
video, etc.).
SET []
disc (Discs recorded in PAL
(" [] " stands for a number.)
> The remote control and main unit are using different
codes. Change the code on the remote control.
Cannot display on this unit.
>
>
Press and hold [OK] and the
indicated number button at the
same time for more than 5
seconds.
You tried to play a non-compatible image.
Confirm "SD" on the unit's display is not blinking and
re-insert the card.
No disc is inserted.
>
U59
> The unit is hot.
The disc may be upside down.
The unit switches to standby for safety reasons. Wait for
about 30 minutes until the message disappears.
Select a position with good ventilation when installing the
unit. Do not block the ventilation hole on the rear and side
of the unit.
® This operation is not available.
>
Some operations are unsupported by the unit. For
example;
- BD-Video: During playback, reverse slow-motion or reverse
frame-by-frame is not possible.
IP address is not set. _
>
IBD655;;
The "IP Address" in "IP Address/DNS Settings" is "- .....
". Set the "IP Address", "Subnet Mask", and "Default
Gateway". (Select the automatic address acquisition if
necessary.)
F99
The unit fails to operate properly. Press [POWER (b/I] on
the main unit to switch the unit to standby for 3 seconds.
Now press [POWER (b/I] on the main unit again to turn
the unit on.
HDMI ONLY
>
Some BD-Video discs can only be output with HDMI.
NET _
>
There is a viewing restriction on a BD-Video or
DVD-Video. (_ 25)
No READ
>
>
The HDMI connection acts unusually.
- Turn the unit and TV off.
- Disconnect the HDMI cable between the player and the
TV.
The media is dirty or badly scratched.
play.
(" [] " stands for a number.)
> There is something unusual.
> Check the unit using the troubleshooting guide. If the
service number does not disappear, do the following.
(_ Disconnect the plug from the AC outlet, wait a few
seconds, then reconnect it.
@ Press [POWER (b!l] to turn the power on.
If the service number does not disappear despite doing the
above, request service from the dealer. Inform the dealer of
the service number when requesting service.
START _
[BD655_
Displays while VIERA CAST is starting up.
No PLAY
>
U72
U73
HD• or FD•
|
>
The USB device is drawing too much power. Remove the
USB device.
The unit cannot
>
[BD655_
The system is being restarted during the firmware update.
Please do not turn off power.
UPD•/•
(" [] " stands for a number.)
> The firmware is being updated.
Please do not turn off power.
FINISH
>
The firmware update is complete.
31
VQT2H86
Audio Information
I
The audio output differs depending on which terminals are connected to the amplifier/receiver,
Digital Audio Output)
• The number of channels listed is the maximum possible number of output channels.
HDMI AV OUT/DIGITAL
and the settings on the unit. (_ 26,
AUDIO OUT
DVD-Video : 5.1ch PCM
Dolby Digital/
Dolby Digital
EX.7
BD-Video : 7.1ch PCM _8
Dolby Digital
Outputs using
original audio
7.1ch PCM
Dolby Digital
DVD-Video : 5.1ch PCM
DTS Digital
Surround/
DTS_ES.7
BD-Video : 7.1ch PCM .9
DTS Digital
Surround
DTS Digital
Surround
7.1ch PCM .9
7.1ch PCM
*_ When
is not supported
with
these
down-mixed
2ch PCM (e.g., TV).
.2 When the connected
equipment
is not supported
the connected
with
multi channel
_3 _
: Regardless
.4 When
"Off'.
*_ When
.6 With
playing
*B _
32
the maximum
BD-Video
without
playing
BD-Video
with secondary
Surround,
"BD-Video
BD-Video
_
.9 The audio
VQT2H86
of a condition,
playing
PCM output,
Digital
.7 When
equipment
Dotby
audio or button
audio or button
EX becomes
surround,
number
is 5.1ch
click sound,
click sound,
PCM audio decoded
the audio
is output
the audio
as Dolby
is output
Digital
as down-mixed
without
secondary
BD-Video
is amplified
from
audio
is played
or button
click
and '7.1ch
5.1ch or 6.1ch
sound,
the audio
is output
is output
Digital,
Audio
the audio is output
Reformatting"
to 7.1ch depending
on the
bitstream,
DTS
Digital
2ch PCM
Surround
bitstream
or
2ch PCM.
PCM
the audio
as Dolby
Down-mixed
as the same format
as if "BD-Video
Secondary
Audio"
PCM audio
decoded
was
set to
as 5.1ch.
DTS-ES
recorded
to DVD-Video
and DTS-ES
recorded to BD-Video
becomes
PCM audio decoded
as DTS-ES.
Secondary
Audio" is set to 'On", Dolby Digital EX is output as Dolby Digital and DTS-ES
: When
output
Digital
secondary
possible
audio formats,
Down-mixed
2ch PCM
as the original
is set to 'Off",
is output
as DTS Digital
format.
the audio is output
DTS, Inc. specifications.
becomes
as 5.1ch.
Surround,
as DTS
however
if
The settings of the audio output vary depending on the connected equipment.
Press [FUNCTION MENU] _ select "Other
"Audio" _>Set each item
Refer to the table below and set each of items.
Functions" _ "[OK]"_
select "Setup"
_ "[OK]"_
For details of the each item, refer to page 26.
IBe
• Because underlined
"PCM"
"Bitstream"
"PCM"
"PCM"
"PCM"
"Bitstream"
"PCM"
"PCM"
"Off"
"Off"
"Off"
"Off"
No effect
No effect
No effect
,,Off,,*3
"Stereo"
No effect
No effect
,,Stereo,,*4
items are the factory presets, it is not necessary to change these settings.
"_If connectedto TV via exceptHDMI,these settingshave no effect.
,2 HD audio: Dolby Digitat Plus, Dolby TrueHD, DTS-HD High ResolutionAudio andDTS-HDMasterAudio
,3 If the connectedequipmentthatdoes not support96 kHz,set to 'On".
,4 If the connectedequipmentthatsupportsthe virtuatsurroundfunction,setto "Surroundencoded".
33
VQT2H86
About MP3/JPEG/
AVCHD/MPEG2 files
|
File format
MP3
Extension
Files must have the extension ".mp3" or
".MP3".
Compression
rate
32 kbps to 320 kbps
Sampling
44.1 kHz/48 kHz
rate
ID3 tags: version 1, 2.2, 2.3, 2.4
(Only titles and the names of artists)
Reference
JPEG
......................................................
File format
JPEG
Extension
Files must have the extension ".jpg" or
".JPG'.
Picture
resolution
between 34× 34 and 8192× 8192 pixels
(sub sampling is 4:2:2 or 4:2:0)
Reference
JPEG conforming DCF* is supported.
• MOTION JPEG and Progressive JPEG is
not supported
* Design rule for Camera File system: unified standard
established by Japan Electronics and Information
Technology Industries Association (JEITA).
• DVD-RAM must conform to UDF 2.0.
• BD-RE must conform to UDF 2.5.
AVC H D
File format
AVCHD format (Vl,0) used on High
Definition Video Camera
(Panasonic and some other's)
Codec
MPEG-4 AVC/H.264
• Discs must conform to UDF 2.5.
!
File format
SD-Video format* used on Standard
Definition Video Camera
(Panasonic and some other's)
Codec
* SD-Video
MPEG2
Entertainment
Video Profile
•
With certain recording
states and folder
differ or playback may not be possible.
•
CD-R, CD-RW : ISO9660 level 1 or 2 (except
This unit is compatible
with multi-session.
•
structures,
for extended
This unit is not compatible
with packet writing.
DVD-R, DVD-R DL (except for AVCHD)
: ISO9660
extended formats), Joliet,
This unit is not compatible
This unit is not compatible
34
VQT2H86
UDF bridge (UDF
with multi-session.
with
packet
writing.
the play order
level
1.02/ISO9660)
may
formats),
1 or 2 (except
Joliet
for
Structure
of folders that can be
You can play files on this unit by structure
of folders
shown below. However depending on the method of
writing data (writing software), play may not be in the
order you numbered the folders.
as
in DVD-R/DVD-R
Prefix the file names with 3-digit numbers in the order you
want to play them.
Root
e.g.,
--001
XXXX.mp3
--002XXXX
mp3
i_Folder
Folder which can be displayed with this unit
from
A
}--- 003XXXX,mp3
F-004XXXX,mp3
: Numbers
XXX: Letters
'_ #x#:
b
005_XXXX
rnp 3
Folder B
001 to 999
F._ 006XXXX
,2 #_#:from 100to 999
XXXXX: 5 figures
,s ####: from 0001to 9999
_i007XXXX.mp3
_-- 008XXXX
L-009XXXX
--7
[..-.]rz_-4_i_n
in DVD-R*4/DVD-R
ii _
[O,Id_-'[_]
ira_P.'.r_
DL*4/CD-R*5/CD-RW *S
Files inside a folder are displayed in the order they were
updated or taken.
Root
e.g.,
mp3
mp3
mp3
O11XXXX.mp3
012XXXX
rnp3
'_ The total combined
maximum
number of recognizable
and folders: 3000 picture contents
and 300 folders.
picture
contents
,5 The total combined
maximum
number of recognizable
and folders: 999 picture contents and 99 folders.
picture
contents
'_ The total combined
picture
contents
and folders:
--P0000001
.]pg
i
P0000002.jpg
rnp3
Folder C
_--010XXXX
Folder
DLICD-RICD-RWl
USB device _
maximum
9999 picture
number
contents
of recognizable
and 300 folders.
A
--
P0000003,jpg
--
P0000004.jpg
--
P0000005
jpg
older B
P0000006.jpg
P0000007.jpg
POOOOOO8.jpg
PO000009 pg
Fo der C
iPOOOOOlOjpg
i
i
P0000011 ]pg
P0000012jpg
in BD-RE*6/DVD-RAM
.4
• Folder structure is not displayed.
Root
e.g.,
--P0000001
--P0000002
.]pg
jpg
JPEG
¢ 4 _ XXXXX *2
XXXX_
--_
_ _ _ .JPG *3
DClM
$ _ _ XXXXX
,
_.i XXXX_
*2
_ _ _.JPG
*3
*4
in SD card /USB device _
_,4
Displays JPEG files in all folders.
• Folder structure is not displayed.
Root
e.g.,
--
P0000001
jpg
--
P0000002
jpg
_ _ XXXXX*2
XXXXg
--_
_ii
g g g.JPG .3
Folder A
P0000003,jpg
P0000004,jpg
35
VQT2H86
Specifications
Signal system:
Operating temperature
NTSC
range:
+5°C to +35 °C (+41 °F to +95 °F)
Operating humidity range:
10 % to 80 % RH (no condensation)
Video output:
1.0 Vp-p (75 D)/Pin jack: 1 system
_:
Componentvideo output (Y:green, Ps:blue,PR:red):
Y:1.0 Vp-p (75 _)/PB, PR:0.7Vp-p (75 _)/Pin jack:l system
Audio output:
2 Vrms (1 kHz, 0 dB)/Pin jack
Number of connectors :
2 channel: 1 system
Digital audio output:
Optical digital output (Optical terminal)
HDMI AV output:
Type A (19 pin)
HDMI (Deep Color, x.v.Color TM, High Bit rate Audio)
This unit supports "HDAVI Control 5" function.
SD card slot:
Connector : 1 system
_IBD655
:USB slot:
USB2.0:I
system
IBD655 : Ethernet: 10BASE-T/100BASE-TX
: 1 system
LASER Specification
Class ][ LASER Product:
Wave length:790 nm (CDs)/655 nm (DVDs)/405 nm (BDs)
Laser power:
No hazardous radiation is emitted with the
safety protection
Power supply:
AC 120 V, 60 Hz
Power consumption:
_
_:Approx.
19 W
_:Approx.
14 W
Power consumption
in standby mode:
Approx. 0.1 W
Power consumption in quick start standby mode:
ADDrox. 7 W
Dimensions (W×D×H)
Including the projecting parts:
430 mmx207 mmx49 mm
(Approx. 16 15!16"x8 5!32"xl
15!16")
Mass (Weight):
Approx. 1.9 kg (4.2 Ibs)
Specifications
36
VQT2H86
are subject to change without notice.
Supplemental information
• TV/Amplifier/Receiver
code list
Panasonic
FUNAI
0051/0055/0250/0650
0180/0171/0179
INSIGNIA
JVC
1564/0171/1204/1326/1517/1660/2002/2003/2004
003610053100691016010169101821073171253
LG
0019/ 0030 / 0032/ 0106 / 0178 / 0317/ 0409 / 0442/ 0457/ 0700/ 0856/ 1178/ 1265
MtTSUBISHt
PHILIPS
PIONEER
001410019100931009810150101551017810331/0358/0836/0868/1250
00_/0690/11_/1454
0038/ 0166/ 0172/ 0679 / 0866
POLAROID
0765/0865/1262/1276/1314/1316/1326/1327/1328/1341/1498/1523/2002
M
SA SUNG
SANYO
0019/0030/0032/0056/0060/0178/0329
0408/0427/058710702/0766/0812
0814/1060
00881010710146101_1015910232104841079910893
SHARP
SONY
0039/0093/0153/0157/0165/0220/0281/0386/0398/0491/0688/0818/0851
0000/0011/0080/0111/0273/0353/0810/0834/0867/1100
T,-._,HiBA
0036/0060/014910154/0!56/0650/0832/0845/!!56/!t64/!256/!265/1356t
us
1656/1704
VIZl0
1758/ 08_ / 0885/ 1756
WESTINGHOUSE
0885 / 0889/ 0890/ 1282/ 1577
•
Display languages
ENG
FRA
Eng sh
French
DEU
German
ITA
ESP
Italian
Spanish
NLD
SVE
DutclSwedish
NOR
DAN
POR
RUS
•
JPN
CH
list
Japanese
Chinese
ARA
HIN
Arabic
HinGI
KOR
Korean
PER
Persian
MAL
VIE
Malay
Vietnamese
IND
MRI
Indonesian
Maod
THA
PQL
Ths
Polish
BUL
RUM
Bulgarian
Romanian
Norwegian
Danish
CES
SLK
Czech
SIovak
GRE
TUR
Greek
Turkisi-
Portuguese
Russian
HUN
FIN
Hungarian
Finnish
Language
•
Others
code list
Abkhazian
Afar:
Afrikaans:
6566
6565
6570
Gujarati:
Hausa:
Hebrew:
7185
7265
7387
Rhaeto-Romance:
Romanian:
8277
8279
Albanian:
8381
Hindi:
7273
Russian:
8285
Amharic:
Arabic:
Armenian:
6577
6582
7289
Hungarian:
Icelandic:
ndonesian:
7285
7383
7378
Samoan
Sanskrit:
Scots Gaelic:
8377
8365
7168
Assamese:
Aymara:
6583
6589
nterlingua:
fish:
7365
71 55
Serbian:
Serbo-Croatian:
8382
8372
Azerbs jam
Bashkir:
6590
6665
Italian:
Japanese:
7384
7465
Shona:
Sindhi:
8378
8368
Basaue:
6985
Javanese:
7487
Singhalese:
8373
6678
Kannada:
Kasnmm:
7578
7583
Slovak:
SIovenian:
8375
8376
Bhutani:
6890
Kazakh:
7575
Somali:
8379
Bihad:
Breton:
6672
6682
Kirgntz:
Korean:
7589
7579
Spanish:
Sundanese:
6983
8385
Bulgarian:
Burmese:
6671
7789
Kurdish:
Laotian:
7585
7679
Swahili:
Swedish:
8387
8386
Byelorussian:
6669
Latin:
7665
Tagalog
8476
Cambodian:
Catalan:
Chinese:
7577
6765
9072
Latvian
Lettish:
Lingata:
Lithuanian:
7686
7678
7684
Taj K:
Tamil:
Tatar:
8471
8465
8484
Corsican:
6779
Macedonian:
7775
Telugu:
8469
Croatian:
Czech:
7282
6783
Malagasy:
Malay.
7771
7783
Thai:
Tibetan:
8472
6679
Danish:
6865
Malayalam:
7776
1- grmya:
8473
Dutch:
Engusn:
Esperan[o:
Estonian:
7876
6978
6979
6984
Maltese:
Maori:
Marathi:
Moldavian:
7784
7773
7782
7779
Tonga:
Turkish
Turkmen:
Twi:
8479
8482
8475
8487
Faroese:
7079
Mongouan:
7778
Ukrainian:
8575
F ]1:
Finnish:
7074
7073
Nauru:
Nepali
7865
7869
Urdu:
Uzbek:
8582
8590
French:
7062
Norwegian:
7679
Vietnamese:
8673
Frisian:
Galician:
7689
7176
Oriya:
Pashto.
7982
6663
VolapLik:
Welsh:
8679
6789
type
[_TrueHDiDTStDTS
96tDTS_HD HI RESI Signal
i
DTS-HD MSTR/MPEG
Georgian:
German:
7565
6869
Persian
Polish:
7065
8076
Wolof:
Xhosa:
8779
6672
Greek:
6976
Portuguese:
6084
Yiddish:
7473
ch (channel)
k (kHz)
Number of channels
Sampling frequency
Greenlandic:
Guarani:
7576
7176
Punjabi:
Quecnua
8065
6165
Yoruba:
Zulu:
6979
9085
b (bit)
Number of bits
Panasonic
COBY
0308
t308 / 0039 / 0367 / 1641/200t/2002
1513 / 2003
DENON
EMERSON
HAP_MAN/KARDON
t360/0004/0273/1t42/13tl
1340/2005
0t10/0189/1306
INSIGNIA
JVC
1030/1077 / 1751/2004
0074 / 1374 / t495 / 1855 / !87t
LG
MARANTZ
1293/2006
1189/t269/0039/0189/1289
ONKYO
PHILIP.<;
Bengali;
0135 / 0380 / 1298 / 1320
tt89/1269/0189/039t/1t20/1266/1368
PIONEER
RCA
SAMSUNG
0823
0823
1023/0150/0244/0531/0630/1343/1384
1023 / 1609 / 1254 / 0054 / 0530 / 053I / 1074 / 1390 / 15tt
1295
SONY
YAMAHA
0815/1126
0354
I622/0t58/0168/0474/1367/1529/1658/1758
0176/0186/1331
• Video attribute
MPEG-2/MPEG-4
AVC/VC-1
Video
recording
method
• Audio attribute
LPC MI[_
Digita!i [_] Digitai+i
Bangia:
Pushto:
37
VQT2H86
Glossary
Local storage _
This storage area is used as a destination for sub contents for
playing BD-Live on BD-Video.
AVCHD
AVCHD is a new format (standard) for high definition video
cameras that can be used to record and play high-resolution
HD images.
LPCM (Linear PCM)
These are a kind of PCM format.
BD-J
These are uncompressed
found on CDs.
Some BD-Video discs contain Java applications, and these
applications are called BD-J. You can enjoy various
interactive features in addition to playing normal video.
Deep Color
Deep Color is a name for device that can reproduce greater
color gradation (4096 steps) when connected to a TV that
supports the Deep Color with HDMI cable. You can enjoy
exceptionally rich, natural-looking colors, with smooth,
detailed gradation and minimal color banding. [A lower color
gradation (256 steps), without Deep Color, will be reproduced
digital signals, similar to those
P4HD (Pixel Precision Progressive Processing for HD)
This is a processor which makes use of an exclusive
Panasonic algorithm. Various processing is supported,
including a high-level conversion of the TV scanning format
from interlace to progressive and a high-level conversion of
standard resolution (480i or 576i) video signal to a 1080 High
Definition video signal.
Consequently, this unit is able to provide video of optimal
resolution to the connected TV.
if connected to a TV which does not support Deep Color. The
unit will automatically set appropriate output to suit the
connected TV.]
PCM (Pulse Code Modulation)
This is one format for converting analog audio into digital
audio, enabling you to enjoy digital audio with no hassle.
Dolby Digital
This is a method of coding digital signals developed
x.v,
by Dolby
Color
TM
Laboratories. Apart from stereo (2-channel) audio, these
signals can also be multi-channel audio.
x.v.Color TM is a name for devices that are compatible with the
xvYCC format, an international standard for expanded color in
motion pictures, and that follow the rules for signal
transmission.
Dolby Digital Plus
Multi-channel audio and higher audio quality is made possible
using Dolby Digital Plus. BD-Video supports up to 7.1 channel
"Youcan enjoy vivid colors of wider color ranges for a more
realistic picture when connected to a TV that supports the
x.v.Color TM with HDMI cable.
output.
Dolby TrueHD
Dolby TrueHD is a very high quality audio format that
reproduces the studio master audio. BD-Video supports up to
7.1 channel output.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters. There
is good separation between the channels, so realistic sound
effects are possible.
DTS-HD
DTS-HD is a high-quality, sophisticated audio format used in
movie theaters. Previous DTS Digital Surround-compatible
equipment can play DTS-HD as DTS Digital Surround audio.
BD-Video supports up to 7.1 channel output.
DTS-HD High Resolution Audio
This is a signal format achieved by improving the previous
DTS, DTS-ES and DTS96/24 formats. It is compatible with
sampling frequency 96 kHz/48 kHz. BD-Video supports up to
7.1 channel output.
DTS-HD Master Audio
This is a Iossless audio format and compatible with 96 kHz/
7.1 ch or less. In addition, faithful reproduction of the master
audio is enabled using Iossless audio encoding technology.
BD-Video supports up to 7.1 channel output.
HDMI
HDMI
Unlike
digital
38
VQT2H86
(High-Definition
Multimedia Interface)
is a digital interface for consumer electronic products.
conventional connections, it transmits uncompressed
video and audio signals on a single cable.
24p
This is a progressive image recorded at a rate of 24 frames
per second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
LimitedWarranty(ONLY FOR U.S.A.AND PUERTORICO)
Panasonic Consumer
Electronics
Company,
Division of Panasonic Corporation
of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic
Blu-ray and DVD Products
Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials
or workmanship, Panasonic Consumer Electronics Company (referred
to as "the warrantor") will, for the length of the period indicated on the
chart below, which starts with the date of original purchase ("warranty
period"), at its option either (a) repair your product with new or
refurbished parts, (b) replace it with a new or a refurbished equivalent
value product, or (c) refund your purchase price. The decision to repair,
replace or refund will be made by the warrantor.
Product
or Part Name
Parts
Labor
Blu-ray Disc Player, Portable Blu-ray
Disc Player
1 year
Blu-ray Home Theater System
1 year
1 year
DVD Player, Portable DVD Player
1 year
90 days
DVD Recorder
1 year
90 days
Rechargeable Batteries (pack),
DVD-RAM Disc (defective exchange)
10 days
Not
Applicable
90 days
During the "Labor" warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts.
This Limited Warranty excludes both parts and labor for
non-rechargeable
batteries, antennas, and cosmetic parts (cabinet).
This warranty only applies to products purchased and serviced in the
United States or Puerto Rico. This warranty is extended only to the
original purchaser of a new product which was not sold "as is".
Mail-tn Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs,
please ship the product prepaid to:
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAIlen, TX 78503
Danacare_us.Danasonic.com
When shipping the unit, carefully pack, include all accessories, and
send it prepaid, adequately insured and preferably in the original
carton. If Lithium Ion batteries are shipped by air the package must be
labeled "Contains Lithium Ion Battery (No lithium metal)". Damaged
batteries are prohibited from shipment by US Mail. Batteries must be
securely packed in a manner to prevent short-circuiting and a package
cannot contain more than 3 Lithium Ion batteries. Include a letter
detailing the complaint, a return address and provide a daytime phone
number where you can be reached. A valid registered receipt is
required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
PURCHASE AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warrantv Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or
cosmetic damage. The warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls,
improper maintenance, power line surge, lightning damage,
modification, introduction of sand, humidity or liquids, commercial use
such as hotel, office, restaurant, or other business or rental use of the
product, or service by anyone other than a Factory Service Center or
other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED
UNDER "LIMITED WARRANTY COVERAGE".
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY.
(As examples, this excludes damages for lost time, travel to and from
the servicer, loss of or damage to media or images, data or other
memory or recorded content. The items listed are not exclusive, but for
illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE
WARRANTY OF MERCHANTABILITY,
ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty
lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have
other rights which vary from state to state. If a problem with this product
develops during or after the warranty period, you may contact your
dealer or Service Center. If the problem is not handled to your
satisfaction, then write to the warrantor's Consumer Affairs Department
at the addresses listed for the warrantor.
PARTS AND SERVICE,
WHICH ARE NOT COVERED
BY
THIS
LIMITED
WARRANTY,
ARE YOUR
RESPONSIBILITY.
Obtain Product Information and Operating Assistance;
locate
your nearest Dealer or Service Center; purchase Parts and
Accessories;
or make Customer Service and Literature requests
by visiting our Web Site at:
htto://www.oanasonic.com/helo
or, contact us via the web at:
htto://www.oanasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, Saturday-Sunday
10am-7pm EST
I For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
Or, send your request by E-mail to:
npcparts_,us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express,
and Personal Checks)
I For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of November
2009
User memo:
The model number and serial number of this product can be found
on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
DATE OF PURCHASE
DEALER NAME __
future reference.
DEALER
MODEL NUMBER
_R
ADDRESS
_
SER AL NUMBER
39
VQT2H86
Limited Warranty (Only for CANADA)
Panasoni¢
PANASONIC
Canada
Inc.
PRODUCTmLIMITED
WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period
as stated below from the date of original purchase.
Technics Audio Product
Panasonic Portable/Clock
Radio (without Tape, CD, MD)
Panasonic Audio/SD Audio Product
Panasonic BD/DVD Product
Panasonic Combination
DVD Player/VCR
Panasonic Combination
DVD Recorder/VCR
Accessories
including
rechargeable
batteries
LIMITATIONS
One (1) year, parts
One (1) year, parts
One (1) year, parts
One (1) year, parts
One (1) year, parts
One (1) year, parts
Ninety (90) days
and
and
and
and
and
and
labour
labour
labour
labour
labour
labour
AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed,
subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or which has been
altered or repaired in any way that affects the reliability or detracts from the performance, nor does it cover any product which is
used commercially. Dry cell batteries are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is
required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC
DAMAGES.
CANADA INC. BE LIABLE
FOR ANY SPECIAL,
INDIRECT OR CONSEQUENTIAL
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential
exclusion of implied warranties, so the above limitations and exclusions may not be applicable.
WARRANTY
SERVICE
FOR PRODUCT
OPERATION
Our Customer Care Centre:
FOR PRODUCT
ASSISTANCE,
please contact:
Telephone #:
1-800 #:
Fax #:
Email link:
(905) 624-5505
1-800-561-5505
(905) 238-2360
"Customer support" on www.Danasonic.ca
REPAIRS, please locate your nearest Authorized Servicentre
Link : "Servicentres
TM
Iocator" under "Customer
at www.panasonic.ca
:
support"
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
4O
VQT2H86
damages,
or the
Referencia rapida en
espaSol (Spanish Quick Reference)
I
Conexiones
basicas
Conexion
a un televisor
compatible
Preparacion
Encienda el televisor y seleccione
adecuada en el televisor.
0
la entrada de video
Pulse [(_ POWER] para encender la
unidad.
Despues de conectar su nuevo reprodutor y pulsar el
bot6n de encendido, aparecera la pantalla de la
configuraci6n basica.
con HDMI
_) Inserte el medio.
Inicia la reproduccion
Pulse [1_] (PLAY).
Conexion
a un televisor
con un
Parada
Pulse [11].
La posici6n de detenci6n se memoriza,
cable para audio/video
Cable de audio/
video (incluido)
Conexion a un televisor compatible
con HDMI y a un amplificador/
receptor compatible con HDMI
Funci6n de reanudaci6n de la reproducci6n
Pulse[1_] (PLAY) para reinJcJarla reproduccJ6n desde esta
posici6n.
• La posici6n se borra si se abre la bandeja o se pulsa [I] varias
veces para visualizar "STOP" en el visor de la unidad.
• En los discos BD-Video incluidos
los BD-J, la funci6n
de reanudaci6n
de la reproducci6n
no funciona.
........Pausa ................................................................
Pulse [I I].
• Pulse [I I] otra vez o [1_] (PLAY) para reiniciar la reproducci6n.
BQsqueda/Camara
lenta
Bt_squeda
Durante la reproducci6n,
pulse [<<]
o [IH_].
• MQsica y MP3: La velocidad esta fija en un paso.
C&mara lenta
Altavoces
multJcanal
Durante la pausa, pulse [<_] o [l_ll_ ].
• BD-Video y AVCHD: $61o direcci6n en avance [IH_].
La velocidad aumenta hasta 5 pasos.
• Pulse [1_] (PLAY) para recuperar la velocidad de
reproducci6n normal.
::.........................................
Salt0
Conecte
el cable
de por Oltimo
alimentacion
de CA
Auna toma de corriente domestica
Durante la reproducci6n
o la pausa, pulse [I<< ] o [_
Salta hasta el titulo, capitulo o pista que desee reproducir.
•Cada pulsaci6n aumenta el nQmero de saltos.
].
Cable de alimentacion de CA (incluido)
• Conectelo cuando haya realizado el resto de conexiones.
Ahorro
de energia
Esta unidad consume una pequefia cantidad de energia
aunque este ajustada en el modo de espera (Accionamiento
rapido : Desactivado, aprox. 0,1 W). Para ahorrar energia
cuando no vaya a utilizar la unidad durante mucho tiempo,
desenchQfela de la toma de corriente.
41
VQT2H86
Java and all Java-based trademarks and Iogos are
trademarks or registered trademarks of Sun Microsystems,
Inc. in the United States and other countries.
This product incorporates the following software:
(1) the software developed independently by or for
Panasonic Corporation,
Manufactured
(2) the software owned by third party and licensed to
Panasonic Corporation,
(3) the software licensed under the GNU General Public
under license from Dolby Laboratories.
and the double-D symbol are trademarks
Laboratories.
Manufactured
Dolby
of Dolby
under license under U.S. Patent #'s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 &
other U.S. and worldwide patents issued & pending.
DTS and the Symbol are registered trademarks, & DTS-HD,
DTS-HD Master Audio I Essential and the DTS Iogos are
trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
Manufactured
under license under U.S. Patent #'s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &
other U.S. and worldwide patents issued & pending. DTS
and the Symbol are registered trademarks, & DTS-HD,
DTS-HD Advanced Digital Out and the DTS Iogos are
trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology
must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
This product is licensed under the AVC patent portfolio
license and VC-1 patent portfolio license for the personal
and non-commercial use of a consumer to (i) encode video
in compliance with the AVC Standard and VC-1 Standard
CAVC/VC-1 Video") and/or (ii) decode AVC/VC-1 Video that
was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video
3rovider licensed to provide AVC/VC-1 Video. No license is
granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC. See
httD://www.mDeala.com.
HDAVI Control
x.v.Color
TM
TM
is a
is a trademark of Panasonic Corporation.
trademark.
VIERA Link TM is a trademark of Panasonic Corporation.
VIERA CAST
EZ
Sync
TM
TM
is a trademark of Panasonic Corporation.
is a trademark
of Panasonic
Corporation.
"AVCHD" and the "AVCHD" logo are trademarks of
Panasonic Corporation and Sony Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
"Blu-ray Disc" is trademark.
"BD-LIVE" logo is trademark of Blu-ray Disc Association.
"BONUSVIEW"
is trademark of Blu-ray Disc Association.
YouTube and Picasa are trademarks of Google,lnc.
42
VQT2H86
License, Version 2 (GPL v2),
(4) the software licensed under the GNU LESSER General
Public License, Version 2.1 (LGPL v2.1 ) and/or,
(5) open sourced software other than the software licensed
under the GPL v2 and/or LGPL v2.1
For the software categorized as (3) and (4), please refer to
the terms and conditions of GPL v2 and LGPL v2.1, as the
case may be at
http://www.g nu.org/licenses/old-licenses/gpl-2.0.html
and
http://www.g nu.org/licenses/old-licenses/Igpl-2.1
.html.
In addition, the software categorized as (3) and (4) are
copyrighted by several individuals. Please refer to the
copyright notice of those individuals at
http://www.am-lin ux.jp/dl/JP RCBW98
The GPL/LGPL software is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY, without even
the implied warranty of MERCHANTABILITY
FOR A PARTICULAR PURPOSE.
or FITNESS
At least three (3) years from delivery of products, Panasonic
will give to any third parry who contact us at the contact
information provided below, for a charge no more than our
cost of physically performing source code distribution, a
complete machine-readable copy of the corresponding
source code covered under GPL v2/LGPL v2.1.
Contact Information
cdrequest@am-linux.jp
Source code is also freely available to you and any other
member of the public via our website below.
http://www.a m-lin ux.jp/dl/JP RCBW98
43
VQT2H86
Index
O AC Power Connection
........
11
Angle ......................
23
Audio
Changing audio ............
17
Channel ..................
23
Language ..............
23, 25
AVCHD .....................
34
O BD-Live
•
....................
_) LAN .......................
25
18
Chapter
17
....................
Cleaning ....................
Connection
..........
(D Deep Color .................
4
8, 9, 10, 11
38
Direct Navigator .............
DNS Server .................
16
28
Dolby Digital .............
Dolby Digital Plus .........
26, 32
26, 32
Dolby TrueHD ............
DTS ....................
26, 32
26, 32
DTS-H D .................
DVD-Video Ratings ...........
26, 32
25
.....................
10
i_) Quick Start .................
• Random play ...............
Re-master ..................
Remote control
28
24
17
.........
4, 5, 14
23, 25
25
26
23
23, 25
Local storage ...............
I_) MPEG2 ....................
MP3 ....................
38
34
20, 34
Setup menu ................
Slideshow ..................
25
19
O Network
Connection ................
Setting ................
• Off Timer ...................
On-screen Language .........
• Picture-in-picture ............
Slow-motion
................
Soundtrack .................
16
23
10
12, 28
28
26
18
Status Message .............
Still picture .................
Subtitle ....................
16
19
23
7
Firmware update .............
Frame-by-frame
.............
t_) HDMI .....................
28
19, 34
Language
Audio .................
Menu ....................
On-screen ................
Soundtrack ................
Subtitle ................
18
BD-Video Ratings ............
BONUSVIEW ................
_) Finalize
O IP address ..................
JPEG ...................
14
16
8, 9
Playback
AVCHD ..................
JPEG ....................
MPEG2 ..................
MP3 .....................
16
19
16
20
Playlists ...................
Pop-up menu ...............
Proxy Server ................
P4HD ......................
15
16
28
38
Repeat play ................
Restore Default Settings ......
Resume play function
O SD card ..................
•
........
USB device ..................
7
Wireless
x,v,Color
TM
10
38
.................
24,27
_AHTInN
-
_AUT ON
CLASS1MVISIBLEAND INVISIBLE
LASERRADIATION
WHENOPEN.
-- DONOTVEWglRECTLYWITHOPIOA
INSTRUMENTS,
IEC8082511A2'CLASSIM
_
VISIBLE
O0
NOT
NE
-ORSIGTIGk]AR
0
eARNING
If you wish to discard this product, please
This
symbol
onlyauthorities
valid in theor European
contact
your is
local
dealer andUnion.
ask
for the correct method of disposal.
21
24p ....................
-
the
22
LAN ...............
AND
iNVISIBLE
S;TkRE
IN]
0
LASER
I3EAM,
RADIATION
FDA
RAYONNEMENT LASER VISIBL£ ET INVI3BLE
&TTENTION E.cAs
_'OUV_RTUa_.
outside
16
7, 18
O VlERA CAST TM ..............
VlERA Link TM
"HDAVl Control TM'' . .........
_
Information on Disposal in other Countries
European Union
24
28
PAS
REGARD_R
DIREOTEMENT
A LIAIDE
WHEN
OPEN.
21CFR/Class
II Ola )
OLASSE 1M,
D'INSTRUMENTS
D'OPTIQU
E,
SYN] IG OG USYNI IG _ASERSTRALING KLASSE 1M, NAR AGET FR
ASEN% UNDGA AT SE LIGE PA MED OPTISKE INSTRUMENTER,
AVA_rAESSA OLET ALTrlINA LUOKAN 1M NAKyMAA JA NAKYMATONTA
LASERSA EILYA,
ALA KATSO OPTISEUA LAITrEELLA SUORAAN SATE£SEEN.
KLASS
1MSYNLIG
OCH
OSYNLIG
LASERST£ALNI
GNA_
DENNA
DEL
AR
-- CIPPNAD.BETRAK'A EJ STRALEN DIREKT GENOM OPTISKT I STRUMEN%
_/C_RRIr,
HT_
....
SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG
KLASSE lt_
WENN ABDECKUNG GEOFFNE%
NICHT DIFIE KT MIT OPTISCHEN INSTRUM NTEN Bt'TRACHTEN.
(Inside of product)
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation
of North America
5770 Ambler Drive
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
www.panasonic.ca
@ Panasonic Corporation
Printed in China
Panasonic Canada Inc.
Mississauga,
L4W 2T3
Ontario
2009
VQT2H86
F1209SK0