advertisement
▼
Scroll to page 2
DVDR3355 QUICK START GUIDE 1 what’s in the box A Main Unit 12nc: 3139 246 16441 3 Start initial setup Control B Remote includes 2x AA batteries 3a Press STANDBY-ON 2 on the DVD recorder to turn it on. Note: For successful installation, your cable/satellite box must be turned on. C RF coaxial D Scart cable cable EDIT AUDIO 3b ANGLE TV/DVD Turn on the TV to the correct programme channel for the input socket (‘EXT’, ‘0’, ‘AV’). ➜ The blue PHILIPS DVD background screen will appear on the TV. 3c 2 connect DVD recorder System Menu - General On Screen Saver Country 2a 3d Germany Video Output Format PAL Restore Factory Settingd Select { Country } and press OK on the remote control. 3e System Menu - Channel Setup Channel Search Search Modify Channel Information Edit 2a DVD recorder back panel 2b 2c 2d Connect existing antenna cable/satellite signal (or from the Cable/Satellite Box [RF OUT or TO TV]) to the ANTENNA input socket at the back of the DVD recorder. 3f System Menu - Language On Screen Display Language English Default Disc Menu LanguageEnglish Default Subtitle Language English Default Audio Language English 3g System Menu - Clock Date (dd/mm/yy) 31/01/05 Time (hh:mm:ss} 10 : 33 : 57 Show DivX® Registration Code Highlight and press 2. Set the Date and Time. Use the numeric keypad 0-9 to input the date/time, then press OK to confirm. OK Connect the power cable from the DVD recorder’s ~ MAINS to the AC power outlet. Helpful Hint: For additional connection diagrams, see User Manual pages 12~19. Highlight and press 2. Select the language. – select TV On-Screen Display language. – select default Disc Menu language. – select default subtitle language. – select default audio language. Use the supplied RF coaxial cable to connect the DVD recorder’s TV output socket to your TV’s antenna input socket. Use the supplied Scart cable to connect the DVD recorder’s EXT 1 TO TV-I/O socket to the matching SCART input socket at the back of your TV. Highlight and press 2. Setup and install TV channels. Select { Channel Search } and press OK on the remote control to start automatic TV channel search. Sort Sort Channel 2d Highlight and press 2. Select the country of your residence. OK 2c 2b Press SYSTEM MENU on the remote control. ➜ Use 3 4 keys to go through the menu. Select an item by pressing 2, and confirm a setting by pressing OK. 3h Press SYSTEM MENU to exit. The DVD recorder is ready for use! See next page for basic recording and playback. 1_dvdr3355_12_qug_eng_16441 1 05/05/2005, 02:43 PM 4 start manual recording 4a 4b 5 start playback To playback a disc Insert a recordable DVD+R/+RWwith the label facing up. 5a SUPER VIDEO To record TV programme, press REC SOURCE to select { Tuner }. 5b Record Mode High quality DVD quality-Standard Play VHS quality-Extended Play VHS quality-Super Long Play 1 Hour Mode 2 Hour Mode 4 Hour Mode 6 Hour Mode 4d 5c Press REC MODE to select a desired recording mode. It defines the picture quality and the maximum recording time for a disc. Picture Quality Playback may start automatically. If not, press PLAY 2. ➜ If a disc menu appears, use 1 2 3 4 keys to navigate within the menu, highlight a title and press OK to start playback. To record from an external device connected to this DVD Recorder, press REC SOURCE repeatedly to select the corresponding external input channel : { Front CVBS } { Front S-Video }, { DV }, { EXT 2 }. 4c Insert a disc with the label side facing up. To stop playback, press STOP 9. To watch the TV programmes 5d Maximum Recording Time per Disc 1 hour 2 hours 4 hours 6 hours Press REC SOURCE to select { Tuner }, then use 3 4 keys to select the programme number. Press REC 0 to start recording. GET PICTURE • 4e • To pause the recording, press ;. To resume recording, press REC 0. To stop the recording, press STOP 9. ➜ Wait until the message disappears from the display panel before you remove the disc. • Check the AV mode on TV. It may be called FRONT, A/V IN, or VIDEO. Choose the different modes using TV remote control. Or, use the TV remote control to select Channel 1 on TV, then press Channel down button until you get the picture. See your TV manual for more details. GET SOUND • • Use the supplied scart cable to connect the DVD recorder to your TV, the picture and sound will output through the TV. Or, connect the AUDIO L/R (red/white) sockets at the back of the DVD recorder to the corresponding AUDIO input sockets on a TV, stereo system or receiver. Turn on the connected system and select the appropriate channel. NEED HELP? Read the accompanying User Manual or visit our website www.philips.com/support 1_dvdr3355_12_qug_eng_16441 2 05/05/2005, 02:43 PM
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project