PERSONAL COOLING SYSTEM 2.0 SI488/SI528 INSTRUCTIONS

PERSONAL COOLING SYSTE M 2.0
SI488/SI528 INSTRUCTIONS
DESCRIPTION AND BATTERY INSTALLATION
Keep your head and body cool by cooling
your neck. If you’ve ever felt the relief of
draping a cold towel across your neck or
forehead on a hot summer day, then you’ve
experienced the concept behind this
Personal Cooling System. Anyone too
active to stay away from the heat will enjoy
the comfort of the Personal Cooling System
from Sharper Image Design .
COOLING PLATES
TM
COOLING PORTS
Access the battery compartment by pressing
the release tab on the underside of the motor
housing.
HI
LO
OFF
Install a single AA alkaline battery as shown by
the diagram inside the battery compartment.
OPERATION
WATER CHAMBER
PADDED NECK
CUSHIONS
Use distilled
water for
best results.
Pull back the padded neck cushions to expose
the water chambers on both sides.
Slowly pour a small amount of water into
both water chambers.
Fill until sponges inside the chambers will
not hold any more water and the surplus
water flows out of the air inlets.
WATER CHAMBER
For first use and occasionally thereafter,
add a drop of liquid soap or detergent to
the water chamber to enhance operation.
MOTOR HOUSING
Shake off excess water and replace the neck
cushions.
Slide the power switch to the HI position. If
the unit becomes too cold for comfortable
use, switch to the LO position.
Place the Personal Cooling System around
your neck.The motor housing should be at
the back of the neck.
DO NOT USE if this unit is too tight or
restricts movement when worn.
Refill the water chamber after 2-4 hours of
use or as needed.
NECK REST
POWER SWITCH
PRECAUTIONS AND CARE
. This unit will overflow with water while it is being filled. Hold
the unit over a water-safe area when filling.
. Use caution when wearing any device that may interfere with
your ability to drive or operate machinery safely.
. Discontinue use if a skin rash or irritation develops from wearing
this product.
. When engaged in activities which may cause the unit to fall or
dislodge, or around appliances or machinery, the user may wish to
remove the unit.
. Do not use this product in any activity that may cause personal
injury from impact or accident.
. Do not use harsh solvents on any part of this product. Clean only
with water and a mild detergent or liquid soap.
. Do not fill the unit with any liquid other than clean water
(distilled water is recommended).
WARRANTY
What Is Covered
This warranty covers any defects in materials or workmanship, with the exceptions stated below.
How Long Coverage Lasts
This warranty runs for 90 days from the date of original purchase.
What Is Not Covered
This warranty does not cover damage caused by misuse or use other than as intended and described in the product instruction
manual, or loss or damage to batteries or removable parts.
What The Sharper Image Will Do
The Sharper Image will repair any defects in materials or workmanship. In the event repair is not possible, The Sharper Image
will either replace this product with one of similar features and price, or refund the full purchase price of the product, whichever
you prefer.
How to Obtain Service
Return the product and receipt, along with a brief explanation of the problem, to:
T.S.I. - Returns Department
2901-A West 60th Street
Little Rock, AR 72209
If you have questions please feel free to contact our customer service representatives at 1-800-344-5555 or by email at
care@sharperimage.com.
This warranty gives you specific legal rights, and you may have other legal rights that vary from state to state.
Sharper Image Corporation
650 Davis St., San Francisco, CA 94111
(415) 445-6000
Shop online: www.sharperimage.com
V1 0402