QuickSpecs
HP Integrity BL860c Server Blade
Overview
1. Three Mezzanine slots
2. Up to two Intel Itanium™ 2 9000 series processors
3. Local I/O connector
4. Two small form factor (SFF) hot-plug drive bays
5. Up to 48 GB PC2-4200, DDR2 memory (12 DIMMs)
At A Glance
This document covers the HP Integrity BL860c server blade only. For more information on HP BladeSystem c-Class
Infrastructure and HP BladeSystem c-Class Interconnects, please see the following QuickSpecs:
HP BladeSystem c-Class Infrastructure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12517_na/12517_na.HTML
HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_na/12524_na.HTML
The HP Integrity BL860c delivers the performance, reliability, and availability on 64-bit operating systems for the ultimate in
scalability. HP-UX, Integrity Virtual Machines,64-bit versions of Red Hat and SUSE Linux Windows Server 2003 (available in
mid 2007), and OpenVMS (available in 2007). provide flexibility in deployment.
HP Integrity BL860c server blade includes:
Processor:
Up to two Intel Itanium™ 2 9000 Series processors
Memory:
Up to 48 GB of memory. Supporting (12) DDR2-533 ECC memory DIMMS
Storage Controller:
Embedded LSI 1068 SAS RAID Controller integrated on system board
Standard RAID 1 controller
Internal Drive Support:
DA - 12671 North America — Version 6 — May 25, 2007
Page 1
QuickSpecs
HP Integrity BL860c Server Blade
Overview
Supports up to (2) two small form factor (SFF) SAS hot plug hard drives
Network Controller:
Four (4) Embedded Standard Gigabit NICs
Plus one (1) additional 10/100 NIC dedicated to Integrity iLO 2 Management
Mezzanine Support:
Three (3) additional I/O expansion slots via mezzanine cards.
Supports up to (3) mezzanine cards
Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (QLogic).
4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity
NOTE: For Linux support See the HPC Cluster Platform 6000 at:
http://www.hp.com/go/hptc
HP PCIe Pass Thru for support of BLc SB40c Storage Blade
NOTE: For SB40c information see:
http://h18004.www1.hp.com/products/servers/storageworks/c-class/sb40c/index.html
Internal USB Support:
No internal USB port on the BL860c
Management:
Integrity Integrated Lights Out 2 (iLO 2) management processor
HP Integrity Integrated Light Out 2 (iLO 2) with Advanced Pack (shipped standard)
Ignite-UX for HP-UX
HP System Insight Manager
HP System Management Homepage
Form Factor:
HP Integrity BL860c server blade is a full-height, BladeSystem c-Class form factor. The BL860c server blade
plugs vertically into the BladeSystem c7000 enclosure, 8 server blades are supported per 10U enclosure. 4
enclosures can be configured to a standard 42U rack; 32 BL860c server blades can be configured in a fully
populated rack.
Warranty:
Protected by HP Services and a worldwide network of resellers and service providers. Three-year parts, 3 Year
Labor and 3 Year on-site limited global warranty. Certain restrictions and exclusions apply. Pre-Failure
Notification on processors, memory, and SAS hard drives
DA - 12671 North America — Version 6 — May 25, 2007
Page 2
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features (Server Blade)
Processor
Intel Itanium™ 2 Dual-Core Processor Model 9040 (1.6 GHz, 18MB L3 cache, FSB533)
Intel Itanium™ 2 Dual-Core Processor Model 9015 (1.4 GHz, 12MB L3 cache, FSB400)
Intel Itanium™ 2 Single-Core Processor Model 9010 (1.6 GHz, 6MB L3 cache, FSB533)
Upgradeability
Upgradeable to two (2) processors
NOTE: The HP Integrity BL860c only supports 1 or 2 processor configurations. Processors must
be identical
Cache Memory
1.2MB per Core Level 2 cache memory
Chipset
Integrated ATI RN-50 1280 x 1024 x 16M color (32 MB DDR memory)
Memory
Type
PC2-4200 DDR2 DIMMs (DDR2-533)
Maximum
1 GB (2 x 512 MB)
Maximum
48 GB (12 x 4 GB)
NOTE: Memory modules are DIMM pairs.
NOTE: Double Chip Spare is enabled in a single memory module. Double Chip Spare requires
identical DIMM types and capacities
Network Adapter
Four (4) embedded NIC ports, plus one (1) additional management NIC port:
Four (4) NIC ports via (2) Broadcom 5704 Dual Port Gigabit NIC
One (1) additional 10/100 NIC dedicated to Integrity iLO 2 Management
Expansion Slots
Three Mezzanine slots (two (2) Type II PCIe, one (1) Type I PCIe x4)
Integrated
Manageability
Integrity Integrated Lights-Out 2 (iLO 2) Advanced Pack (shipped standard)
Storage Controller
LSI 1068 SAS Controller 2 SAS Channels (one to each HDD)
Supports RAID 1
Maximum Internal
Storage
Hot Plug Serial Attach
SCSI (SAS)
292GB SAS
2 x 146GB Serial Attached SCSI
DA - 12671 North America — Version 6 — May 25, 2007
Page 3
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features (Server Blade)
Graphics
Integrated ATI RN-50 1280 x 1024 x 16M color (32 MB DDR memory)
Graphics Resolution
Supported
Resolution Color Depths Depths 1280 x 1024, 16.7M , 64k, 256,16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
Fiber Channel on the
HP Integrity BL860c
server blade
Optional Fibre Channel HBAs are supported by the HP Integrity BL860c. The mezzanine circuit
board connects directly to the server blade system board.
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem (403619-B21)
Uses common drivers which means that customers can standardize on one QLogic driver
whether they are using the QMH2462 or other 4Gb and 2Gb HBAs powered by QLogic
QLogic Fibre Channel HBAs feature
Optimal performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds
Dual-ports for redundant path connections
Up to two FC HBAs per server blade providing redundant FC HBA support
Optimized for HP StorageWorks and supported by third party SAN vendors
Support for HP-UX, Microsoft® Windows® (available mid 2007)and Linux operating systems
environments
Compatible SAN
HP Integrity BL860c server blades are optimized for HP StorageWorks MSA, EVA, and XP
HP Integrity BL860c server blades are compatible with select third party SANs (please see blade
storage page for more details: http://h18000.www1.hp.com/products/servers/proliant-bl/cClass/storage.html)
DA - 12671 North America — Version 6 — May 25, 2007
Page 4
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
Insight Control Data
Center Edition
Insight Control Data Center Edition delivers foundation management for HP BladeSystem
lifecycles, including hardware resource deployment, health monitoring, software version control,
performance monitoring, vulnerability scanning and patch management.
Installs the following components by default using the wizard-based integrated installer:
HP Systems Insight Manager
Rapid Deployment Pack (not supported on HP-UX)
Performance Management Pack (not supported on HP-UX nor Linux on Integrity)
Vulnerability and Patch Management Pack (not supported on Integrity)
Additional Integrity Essentials software and management tools included on the Insight Control
Data Center Edition DVD can be installed manually.
Virtualization Management Suite
Workload Management Pack
HP Open Service Event Manager
HP Instant Support Enterprise Edition
NOTE: For Licensing and Packaging Options please see the options section of this QuickSpecs.
NOTE: Insight Control Data Center Edition is delivered with HP BladeSystem c-Class enclosures
with either 16-server licenses or 8-server evaluation licenses (30-days). For additional information
on HP BladeSystem c-Class Infrastructure please visit: HP BladeSystem c-Class Infrastructure
QuickSpecs at http://h18000.www1.hp.com/products/quickspecs/12517_na/12517_na.HTML
NOTE: For additional product and licensing information about Insight Control Data Center Edition,
HP Systems Insight Manager and Essentials software refer to
http://www.hp.com/servers/proliantessentials.
Foundation
Management and
Essentials Software
Plug-ins
HP Systems Insight
Manger
IgniteUX for HP-UX
Deployments
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible environment to centrally manage servers, storage and other
infrastructure devices across multiple operating system platforms.
The Ignite-UX product is a free toolset that enables a network install of
HP-UX onto multiple PA-RISC and/or Integrity servers on a network. It
can also be used to create custom install configurations, or golden
images, recover systems remotely, create custom recovery media
including tape, CD and DVD, and manage and monitor multiple client
installation sessions
DA - 12671 North America — Version 6 — May 25, 2007
Page 5
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
Integrity Essentials for
HP-UX
The HP Integrity Essentials for HP-UX is essential software for Software
Deployment, Configuration Management, and Workload Management.
Software Deployment:
Ignite-UX
Software Distributor-UX
Software Package Builder
Security Patch Check
Patch Assessment tool
Configuration Management:
Systems Management Homepage
HP-UX Bastille
Serviceguard Manager
Distributed System Administrative Utilities
HP-UX webmin-based Admin
Integrated Lights-Out & Management Processor
Workload Management:
Virtualization Manager*
Capacity Advisor*
OpenView GlancePlus*
OpenView Performance Agent
Process Resource Manager
Global Workload Manager*
*NOTE: Fee based software products which aren't bundled with the HPUX Foundation OE. GlancePlus and the Performance Agent are
bundled with the HP-UX Enterprise OE.
ProLiant Essentials
Rapid Deployment Pack (RDP) extends HP Systems Insight Manager
Rapid Deployment Pack with a complete deployment solution for HP Integrity server blades
(not supported for HPrunning Linux or Windows (available mid 2007). RDP provides a central
UX)
location to configure server hardware, deploy the Windows, Linux
operating environments and install HP Integrity Support Pack drivers
using images and scripted profiles.
DA - 12671 North America — Version 6 — May 25, 2007
Page 6
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
HP Integrity Essentials
Foundation Pack for
Linux
The HP Integrity Essentials Foundation Pack for Linux contains
software designed to simplify the installation, configuration, and
management of Linux on HP Integrity Servers with Linux in a Data
Center. HPIEFPL simplifies tasks including system and disk partitioning
as well as prepares your system for installing either the RHEL or SLES
distribution.
The Smart Setup application is a bootable media that HP recommends
to be used prior to installing the operating system distribution. This
application media contains the latest documentation, firmware, and
tools to help configure and optimize your system. Smart Setup provides
the following: a system hardware inventory tool, tools to help configure
system internal storage arrays and adapters, installation of the
hardware diagnostics tools, and tools to launch the appropriate Red Hat
or Novell distribution installer.
.
The Support Pack component of HPIEFPL includes HP value added
software that can be used to either integrate with existing system
management solutions or directly manage an HP Integrity server.
Following the installation of the Linux distribution of choice, use the
Management media to install additional tools, HP Insight Management
Agents, HP WBEM providers, and System Management Homepage
(SMH).
GlancePlus
ProLiant Essentials
Performance
Management Pack
(Windows on Integrity
Only; Windows support
available mid 2007)
HP System Insight Manager
HP Insight Manager Agents
HP System Management Homepage
Web-based Enterprise Management (WBEM) Solutions
HP Management Base for Integrity Servers
OpenPegasus
HP Array Configuration Utility
GlancePlus provides performance information about your system. It lets
you easily examine system activities, identify and resolve performance
bottlenecks, and tune your system for more efficient operation.
Performance Management Pack detects, analyzes, and explains
hardware bottlenecks on HP Integrity servers running Windows.
DA - 12671 North America — Version 6 — May 25, 2007
Page 7
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
Insight Management
Agents
The Insight Management Agents should be installed on all HP servers
to present system instrumentation, health and configuration information
into HP Systems Insight Manager and the HP System Management
Homepage. The HP System Management Homepage aggregates
systems data from Insight Management Agents and other HP
management tools, providing a consolidated browser-based interface
for managing individual servers.
The HP System Management Homepage (SMH) and OS
instrumentation (WBEM providers) to support management tools such
as SMH and HP SIM are included in the HP-UX Operating
Environments
Insight Management Agents and The HP System Management
Homepage are included on ProLiant Support Packs, and can also be
installed using the server profiles provided with the ProLiant Essentials
Rapid Deployment Pack
Blades Visualization
Optional ProLiant
Essentials Value
Packs
For additional information about the Management Agents and the HP
System Management Homepage please visit the management Web site
at http://www.hp.com/servers/manage.
Used by System Administrators to identify, associate and group blades
into collections, using tables, trees, and picture views, and it can also
be used to monitor performance and launch Integrity Essentials.
NOTE: For more information about Manageability solutions for Integrity
Servers go to http://www.hp.com/go/integrityessentials
Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to
address specific business problems and needs:
Intelligent Networking Pack - detects and analyzes network bottlenecks or broken network
linkages and steers traffic to the optimum route based on network conditions, plus it
provides an extra layer of protection. The virus throttle feature of the solution slows the
propagation of fast spreading virus.
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value
Packs. Refer to http://www.hp.com/servers/proliantessentials or the various Essentials Value Pack
product QuickSpecs for more information.
DA - 12671 North America — Version 6 — May 25, 2007
Page 8
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
OS Support
HP-UX 11i v2 Mission Critical Operating Environment
HP-UX 11i v2 Enterprise Operating Environment
HP-UX 11i v2 Foundation Operating Environment
HP-UX 11i v2 Technical Computing Operating Environment
Red Hat Enterprise Linux AS & ES v4
Novell SUSE Enterprise Linux v10
Windows Server 2003, Enterprise and Datacenter (64-bit)
OpenVMS I64 Foundation Operating Environment for Itanium Servers
OpenVMS I64 Enterprise Operating Environment for Itanium Servers
OpenVMS I64 Mission Critical Operating Environment for Itanium Servers
NOTE: For a more complete and up to date information on HP-UX 11i support, please visit the
HP-UX11i website at http://www.hp.com/go/hpux11i
NOTE: For a more complete and up to date information on OpenVMS support, please visit the
HP-OpenVMS website at http://www.hp.com/go/openvms
NOTE: For a more complete and up to date information on Integrity Windows support, please visit
the HP Integrity Windows website at
http://h18004.www1.hp.com/products/servers/software/microsoft/Integrity-index.html
NOTE: For a more complete and up to date information on Linux Operating Systems on Integrity
or BladeSystem platforms, please visit the Integrity and BladeSystem Linux matrix website:
http://www.hp.com/go/lxintegritycert
Supported Software
Options
HP Integrity Virtual Machines (with HP-UX guest OS's and Windows Guest OS's)
HP Virtualization Manager
HP Capacity Advisor
HP Process Resource Manager
HP Global Workload Manager
Intelligent
Manageability
HP Integrity Integrated Lights-Out 2 (iLO 2) Advanced Pack (shipped standard with the HP
Integrity BL860c)
Virtual serial console (Multiple, mirrored sessions, with previous context and console log buffer)
Virtual Media (CD, DVD, and ISO file image)
Virtual Power Button Control
Embedded system health and Integrity fault management Diagnostics and troubleshooting:
virtual front panel
log access to Integrity SEL
FPL Blade power consumption reading
Dedicated LAN Connectivity
Automatic IP Configuration via DHCP/DNS/WINS browser
Command Line and scripted access Industry Standard RC4, 128-bit Secure Sockets Layer (SSL)
and Secure Shell (SSH) Security
Directory Services Integration (LDAP)
Support for 19 user accounts with customizable access privileges
NOTE: Advanced features such as Directory Services Integration (LDAP), vKVM for Windows
(available mid 2007) and browser accessible Virtual Media are included with the HP Integrity
BL860c server blade.
DA - 12671 North America — Version 6 — May 25, 2007
Page 9
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
Availability
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
Two hot-plug SAS hard drive bays and integrated RAID (LSI 1068) controller on every server
blade
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load
balancing)
On line memory page deallocation
ECC protected DDR2 memory
Memory double chip spare to overcome two DRAM chip failures
Dynamic Processor resilience and deallocation with HP-UX
Journal file system with HP UX*
Auto reboot
HP Serviceguard for HP UX*
HP Serviceguard Extension for RAC for HP UX*
HP Serviceguard Extension for SAP for HP UX*
Serviceguard Manager for HP UX and Linux Clusters*
HP Event Monitoring Service
HA Monitors for HP UX
HA Toolkits for HP UX and Linux
HP Mirrordisk/UX*
Extended Campus Cluster*, HP Metrocluster*, and HP Continentalclusters* for HP UX
HP System Insight Manager (SIM) for proactive fault management
HP StorageWorks Cluster Extension XP for Linux
HP Serviceguard Storage Management Suites for HP-UX*
*NOTE: Fee based software products
Security
Hardware Security
Power-on password
Administrator's password
Integrity Integrated Lights Out 2 has 19 customizable user accounts and SSL encryption
Integrity Integrated Lights Out 2 can be disabled via a Global Setting
SSL encryption on web console
Platform security fundamentals
The most basic goal of operating system security is to preserve the integrity of the system in the
face of attack. The HP-UX 11i operating system includes a number of features that assist the
administrator in locking down the platform:
HP-UX Bastille provides a graphical interface that guides an administrator in tasks to
harden the system against attack, including locking down system ports, files, and other
components.
Host IDS uses kernel-level system audit information to continuously monitor many systems
for attacks, generating alerts and, as an option, also responding in real time.
IPFilter provides system firewall capabilities, including stateful connection filtering to limit
the "attack surface" of the platform, and connection throttling to limit the effectiveness of
denial-of-service attacks.
Install-Time Security eases default lockdowns by offering a menu of security profiles that
may be applied as part of the operating-system installation process.
Security Patch Check helps ensure security patch currency by periodically connecting to
DA - 12671 North America — Version 6 — May 25, 2007
Page 10
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
HP and recommending the latest security-relevant patches.
Execute-Protected Stack prevents common types of buffer overflow attacks, which are a
leading contributor to platform compromise.
Security containment
HP Security Containment for HP-UX 11i is a suite of security technologies designed to
dramatically reduce the likelihood of system compromise. HP incorporates these enhanced
security features into the mainstream HP-UX 11i operating environment to help businesses
combat increasingly complex threats. Without requiring modification to applications, HP Security
Containment isolates compromised applications, which are denied unauthorized access to other
applications or files on the system.
HP-UX 11i Security Containment comprises three core technologies that together provide a highly
secure operating environment:
Compartments provide isolation and restrict access to application and system resources
outside of the compartment to prevent catastrophic damage should a compartment be
penetrated. HP-UX Security Containment accomplishes this by controlling the flow of
information between processes in different compartments. For example, outside
compartments can accept and process customer-facing data and then transfer it securely,
by rule, to inside compartments for non-public access and processing.
Fine-Grained Privileges grant only the privileges needed for a task and, optionally, only for
the time needed to perform the task. Applications that are "privilege-aware" are able to
elevate their privilege level during the operation and lower it after completion of the
operation.
Role-Based Access Control provides a mechanism to allow non-root users to perform
administrative tasks, effectively splitting the power of root into a manageable set of roles. An
out-of-the-box configuration supports many common HP-UX 11i commands and, when
combined with HP OpenView Select Access, also supports multi-system access
management.
Identity management and accountability
Standard Mode Security Enhancements offer granular account and password policies on
a system-wide or per-user basis, including the ability to generate detailed system audits for
user accountability.
HP-UX LDAP-UX client services simplify identity management by allowing system
authentication and naming services to leverage a new or existing LDAP directory.
Kerberos server and clients offer enterprise-class Single-Sign-On (SSO) services as well
as enhanced interoperability with Windows® ADS.
HP-UX AAA server (RADIUS) authenticates network devices and controls access.
Red Hat Directory Server for HP-UX provides an industry-standard, centralized directory
service to store digital identity information.
Common Criteria certification
The HP-UX 11i v2 operating system running on HP 9000 or HP Integrity platforms has been
successfully evaluated against the requirements for the EAL4 Common Criteria (ISO 15408)
Assurance Level, augmented by ALC_FLR.3 (flaw remediation), using the Controlled Access
(CAPP) and Role-Based Access Control (RBAC) Protection Profiles. EAL4+ is sometimes used as
the abbreviated form for additional assurances. Details of the evaluation and evaluated
configuration are available at
http://www.commoncriteriaportal.org/public/files/epfiles/CRP225.pdf and
http://www.commoncriteriaportal.org/public/files/epfiles/hp-ux11iv2.pdf.
DA - 12671 North America — Version 6 — May 25, 2007
Page 11
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
New Security Features:
HP-UX Identity Management Integration for Select Access, an HP OpenView Select tool
included at no charge with the HP-UX operating system, simplifies user management with
improved provisioning and manageability. Instead of accessing each machine individually to
update security polices, it is now possible to manage HP-UX 11i servers on a one-to-many
basis; and add policies and rules that define user privileges and manage access rights. With
this tool, it takes just a single click to define and apply high-level security policies that
accompany a specific role within an organization. For example, the tool automatically
assigns system backup and restore rights when an employee joins the operations team, and
withdraws these privileges when the employee leaves the team.
Encrypted Volume and File System transparently protects "data-at-rest" against
unauthorized disclosure if the data is lost or stolen, and may also provide "safe harbor,"
avoiding the need for breach disclosure required by some state laws.
Trusted Computing Services provides software support for embedded security hardware
that is available on selected HP Integrity servers for enhanced key protection and EVFS
auto-boot support.
HP Protected Systems offers an automated mechanism to configure and deploy more
secure systems by leveraging the built-in protection of HP-UX 11i servers, reducing the time
and level of security knowledge required by IT personnel when configuring such
mechanisms as Security Containment, which isolates processes and resources.
HP-UX Bastille with drift reporting checks the consistency of a system's hardening
configuration with previously applied hardening policy to avoid risk of system changes. This
data reduces system exposure to malware, simplifies compliance maintenance, and
provides visibility into undone hardening to allow planned response without risk of
unexpected system breakage.
HP-UX AAA Server offers more flexible integration with enterprise databases in combination with
centralized, RADIUS-based user authentication and network access logging to simplify auditing
and compliance.
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP Integrity Server Blades, HP
ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx,
EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact
your sales representative or go to http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations
of our valued customers. If you require "custom" rack configuration, please contact HP's Customer
Business Center or an Authorized Partner for assistance. For additional information please visit:
http://h30099.www3.hp.com/configurator/
Service and Support
HP Premium Services are available for the HP Integrity BL860c server blade. These services offer
DA - 12671 North America — Version 6 — May 25, 2007
Page 12
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
integrated hardware and software support to help customers maintain a robust, stable, flexible IT
environment that enhances their business agility. They encompass today's most popular products,
including UNIX, Windows (available mid 2007), and Linux servers, as well as mobile technology,
network devices, desktops, printers, storage solutions, management software and more.
All of these Premium offerings let customers leverage HP Services multi-vendor, multi-technology
experience and expertise; global reach with delivery capabilities from 600 offices in 160 countries;
single-point-of-contact problem diagnosis and resolution; advanced remote monitoring and
performance enhancement technologies; and proven support management processes based on
IT best practices.
HP Services professionals can help customers identify the Premium support offering that fits their
business and technology goals. HP Premium Hardware and Software Services include:
Mission Critical Partnership - custom services to help you achieve your strategic business
goals and fulfill your most demanding service-level commitments through continual servicequality improvements
HP Critical Service - comprehensive preventive services and super-responsive support to
maximize availability and minimize downtime risk exposure in mission-critical environments
HP Proactive 24 Service - collaborate with HP Services professionals to improve operational
effectiveness, performance, and stability through joint services planning and 24x7
hardware/Software Support
Support Plus 24 - 24x7x365 onsite hardware and over-the-phone Software Support for HP
and selected multi vendor products, plus software updates at substantial subscription
savings
Support Plus - the economical choice for single-source hardware/Software Support
delivered during extended business hours, as well as cost-saving software updates
This product is covered by a global limited warranty and supported by HP Services.
NOTE: Server Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
NOTE: Server Blade Enclosure Limited Warranty includes 3 year Parts, 3 year Labor, 3-year onsite support.
Care Pack services provide a range of life cycle support options that let you choose the service
levels that meet your business requirements, from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24
hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support.
System Management, Performance Services and Mission Critical Support Solution
NOTE: For more information regarding the Blade service portfolio visit our worldwide web site on
the internet at: http://h20219.www2.hp.com/services/cache/81725-0-0-225-121.html
HP Care Pack services for the c7000 Enclosure cover the enclosure, power supplies and fans. HP
qualified rack options are covered by these services when installed within the same rack. HP
Supported Ethernet devices covered include the Ethernet Pass-Through Module, Fibre Channel
Pass-Through Module and GbE2c Ethernet Blade Switch and Cisco Catalyst 3020 Blade Switch.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices
DA - 12671 North America — Version 6 — May 25, 2007
Page 13
QuickSpecs
HP Integrity BL860c Server Blade
Standard Features
http://www.hp.com/go/proliant/carepack
DA - 12671 North America — Version 6 — May 25, 2007
Page 14
QuickSpecs
HP Integrity BL860c Server Blade
Models
Two (2) Processors Base Models
HP Integrity BL860c
9010 SC (2P)
AD323A Opt #001
HP Integrity BL860c
9015 (2P)
AD323A Opt #002
HP Integrity BL860c
9040 DC (2P)
AD323A Opt #003
Processor(s)
One of the following
depending on model
Cache Memory
Memory
Network Adapter
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
Two (2) Intel Itanium™ 2 Single-Core Processors Model 9010 (1.6 GHz,
6MB L3 cache)
Two (2) Intel Itanium 2 Dual-Core Processors Model 9015 (1.4 GHz,
12MB L3 cache)
Two (2) Intel Itanium 2 Dual-Core Processors Model 9040 (1.6 GHz,
18MB L3 cache)
1.2MB per Core Level 2 cache memory
No memory included (PC2-4200, DDR2-533)
4 Embedded NICs: Dual Broadcom 5704 Gigabit NICs plus (1)
additional 10/100 NIC dedicated to Integrity iLO 2 Management
LSI 1068 SAS Controller
No drives included; (2) SFF SAS drive bays
292GB SAS
None
Up to 8 supported in HP BladeSystem c7000 Enclosure
One (1) Processor Base Models
HP Integrity BL860c
9010 SC (1P)
AD217A Opt #001
HP Integrity BL860c
9015 (1P)
AD217A Opt #002
HP Integrity BL860c
9040 DC (1P)
AD217A Opt #003
Processor(s)
One of the following
depending on model
Cache Memory
Memory
Network Adapter
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
One (1) Intel Itanium™ 2 Single-Core Processors Model 9010 (1.6 GHz,
6MB L3 cache)
One (1) Intel Itanium 2 Dual-Core Processors Model 9015 (1.4 GHz,
12MB L3 cache)
One (1) Intel Itanium 2 Dual-Core Processors Model 9040 (1.6 GHz,
18MB L3 cache)
1.2MB per Core Level 2 cache memory
No memory included (PC2-4200, DDR2-533)
4 Embedded NICs: Dual Broadcom 5704 Gigabit NICs plus (1)
additional 10/100 NIC dedicated to Integrity iLO 2 Management
LSI 1068 SAS Controller
No drives included; (2) SFF SAS drive bays
292GB SAS
None
Up to 8 supported in HP BladeSystem c7000 Enclosure
DA - 12671 North America — Version 6 — May 25, 2007
Page 15
QuickSpecs
HP Integrity BL860c Server Blade
Configuration Information - Factory Integrated Models
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration
Models
HP Integrity BL860c Server Blade
NOTE: Choose from base models above.
NOTE: Adding Option code "#0D1" to the Server Blade PN will integrate the
configured blade into the enclosure (which must be on the same order)
Configurable Model ships with:
Four embedded Gigabit Ethernet NIC ports plus (1) additional 10/100 NIC
dedicated to Integrity iLO 2 Management
Integrated LSI 1068 hardware RAID controller
Two small form factor (SFF) SAS hot plug hard drive bays
HP Integrity Integrated Lights-Out 2 Advanced Pack
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted):
Processors
Memory
RAID 1 Configuration
Upgrade Option
Select a base model (either 2P or 1P models) which has the desired CPU
offering.
HP 1GB REG PC2-4200 2x512MB 1RANK Kit
HP 2GB REG PC2-4200 2x1GB 1RANK Kit
HP 4GB REG PC2-4200 2x2GB 2RANK Kit
HP 8GB REG PC2-4200 2x4GB 2RANK Kit
NOTE: Memory Modules consist of pairs of DIMMs
NOTE: DIMMs must be installed in pairs
Factory configured hardware RAID 1
NOTE: Requires two (2) SAS Hard Drives identical in speed and capacity
NOTE: Ordering AD242A#106 provides factory configuration of the embedded
LSI 1068 SAS controller to RAID1.
DA - 12671 North America — Version 6 — May 25, 2007
AD342A
AD343A
AD344A
AD345A
AD248A #106
Page 16
QuickSpecs
HP Integrity BL860c Server Blade
Configuration Information - Factory Integrated Models
Step 3: Choose Additional Options for Factory Integration
Fibre Channel
Mezzanine Options
Hard Drives
Fibre Channel
Mezzanine Options
c-Class Mezzanines
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem
403619-B21
Serial Attached SCSI (SAS) SFF Hot Plug
HP 72GB 3G SAS 15K SFF SP HDD
HP 36GB 3G SAS 15K SFF SP HDD
HP 146GB 3G SAS 10K SFF HDD
HP 72GB 3G SAS 10K SFF SP HDD
HP 36GB 3G SAS 10K SFF SP HDD
HP Dual Port 4Gbps QLogic FC HBA (Type I Mezz)
431935-B21
431933-B21
431958-B21
375861-B21
375859-B21
403619-B21
HP BLc SB40c PCIe Mezzanine Pass Tru Option Kit
NOTE: Needed to support the SB40c storage blade with HP c-Class
BladeSystem full-height server blades.
NOTE: Adding option "0D1" to these options indicates factory integration of that
product.
431643-B21
Step 4: Choose Additional Options for Field Upgrades
NOTE: For additional options, including server blade enclosure with enhanced backplanes, interconnect options and power
subsystem options; please refer to the "Options" section below.
DA - 12671 North America — Version 6 — May 25, 2007
Page 17
QuickSpecs
HP Integrity BL860c Server Blade
Options
Processors (field
upgrade only)
Intel Itanium™ 2 Dual-Core Model 9040 (1.6 GHz, 18MB L3 cache, FSB533)
Intel Itanium 2 Dual-Core Model 9015 (1.4 GHz, 12MB L3 cache, FSB400)
Intel Itanium 2 Single-Core Model 9010 (1.6 GHz, 6MB L3 cache, FSB533)
NOTE: HP Integrity BL860c processor upgrade kits contain one processor.
Processors must be identical. No mixing of processor models is allowed.
NOTE: The Integrity BL860c only supports 1 or 2 processor configurations.
AD270A
AD271A
AD272A
Memory
HP 1GB REG PC2-4200 2x512MB 1RANK Kit
HP 2GB REG PC2-4200 2x1GB 1RANK Kit
HP 4GB REG PC2-4200 2x2GB 2RANK Kit
HP 8GB REG PC2-4200 2x4GB 2RANK Kit
NOTE: Memory Modules consist of pairs of DIMMs
DIMMS must be installed in pairs
NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs
installed in the lowest numbered slots.
AD342A
AD343A
AD344A
AD345A
Hard Drives
Serial Attached SCSI (SAS) SFF Hot Plug
HP 72GB 3G SAS 15K SFF SP HDD
HP 36GB 3G SAS 15K SFF SP HDD
HP 146GB 3G SAS 10K SFF HDD
HP 72GB 3G SAS 10K SFF SP HDD
HP 36GB 3G SAS 10K SFF SP HDD
NOTE: SAS drives have a 3 year warranty.
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications
such as capacity, height, width, interface, transfer rate, seek time, physical
configuration, and operating temperature:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.HTML
431935-B21
431933-B21
431958-B21
375861-B21
375859-B21
c-Class Mezzanines
HP BLc SB40c PCIe Mezzanine Pass Tru Option Kit
NOTE: Required to support the SB40c storage blade (P/N 411243-B21) with HP
c-Class BladeSystem full-height server blades.
431643-B21
Fibre Channel
Mezzanine Options
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem
NOTE: Supports HP c-Class BladeSystem server blades
403619-B21
InfiniBand Mezzanine
Options
HP 4X DDR IB Mezzanine HCA (no Software)
HP 4X DDR IB Mezzanine HCA (with Voltaire Software
HP 4X DDR IB Mezzanine HCA (with Cisco Software
NOTE: For Linux support See the HPC Cluster Platform 6000 at
http://www.hp.com/go/hptc
410533-B21
409377-B21
438670-B21
DA - 12671 North America — Version 6 — May 25, 2007
Page 18
QuickSpecs
HP Integrity BL860c Server Blade
Options
HP StorageWorks
SB40c Storage Blade
HP StorageWorks SB40c Storage Blade
NOTE: Please see the SB40c Storage Blade QuickSpecs for additional options
and configuration information at
http://h18000.www1.hp.com/products/quickspecs/12587_na/12587_na.HTML
411243-B21
HP StorageWorks
Modular Smart Array
1000
HP StorageWorks Modular Smart Array 1000
NOTE: Please see the Modular Smart Array 1000 QuickSpecs for additional
options and configuration information at
http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.HTML
201723-B22
USB Options
HP Multi Bay II cradle (to hold DVD Drives below)
HP Multi Bay II DVD+/-RW Drive
NOTE: HP-UX does not support writing to a DVD drive.
MultiBay cradle/drive is cabled to c-Class enclosure via local I/O cable (shipped
with c-Class enclosure).
NOTE: PC or Notebook computer is NOT required.
Service and Support
Offerings (HP Care
Pack Services)
NOTE: The HP Care Pack service part numbers below for the Integrity BL860 cClass server blades, cover the server blade and all HP branded hardware
options qualified for the server, purchased at the same time or afterwards,
internal to the server.
NOTE: HP Care Pack services for the c7000 Enclosure cover the enclosure,
power supplies and fans. HP qualified rack options are covered by these
services when installed within the same rack. HP Supported Ethernet devices
covered include the Ethernet Pass-Through Module, Fibre Channel PassThrough Module, Cisco Catalyst 3020 Blade Switch and GbE2c Ethernet Blade
Switch.
NOTE: The services listed below are available for both Integrity and ProLiant
blades, as well as the c7000 enclosure, when ordering flexible services
Support Plus
Support Plus, 1 Year
Support Plus, 3 Years
Support Plus 24, 1 Year
Support Plus 24, 3 Years
HP Proactive Service
HP Proactive Service, 24 Hour, 1 Year
HP Proactive Service, 24 Hour, 3 Year
HP Critical Service
Hardware Only, Critical Service, 7-Day x 24 Hour, 1 Year
Hardware Only, Critical Service, 7-Day x 24 Hour, 3 Years
Installation Services
Integrity BL860c Server Blade Hardware Installation
ProLiant BL c-Class Enclosure and Server Blade Hardware Installation
Installation & Start-up Services
DA - 12671 North America — Version 6 — May 25, 2007
PA509A
PA851A
HA109A1
HA109A3
HA110A1
HA110A3
HA111A1
HA111A3
HA112A1
HA112A3
HA113A1
HA113A1
Page 19
QuickSpecs
HP Integrity BL860c Server Blade
Options
Provides for the Installation and Start-up of ProLiant Essentials Rapid
Deployment Pack
NOTE: Provides installation on a Customer supplied server designated as a
Deployment Server. Includes the deployment of a single server. This new server
will be deployed using either one of the pre-configured scripts or an image. In
addition, the service will provide for the capture and storage of the configuration
of the newly deployed server and orientation on product usage. To be delivered
during standard office ours, standard office days.
Provides for the Installation and Start-up of Rapid Deployment Pack
Implementation of Rapid Deployment Pack (Basic) (Electronic)
Provides for the Installation and Start-up of System Insight Manager (Electronic)
HP Installation & Startup Service for HP BladeSystem Infrastructure
Provides for an integrated hardware and software implementation that includes
remote service planning, onsite deployment of hardware and software,
installation verification testing and customer orientation. Hardware deployment
covers the installation of a single BladeSystem enclosure that includes server
blades (up to 16), Ethernet network interconnect, and power options. Software
deployment covers the installation and configuration, where required of HP
BladeSystem Essential Insight Control Datacenter Edition which includes
Systems Insight Manager (SIM), HP Rapid Deployment Pack (RDP) and
Performance Management Pack (PMP), HP-UX ignite server or HP-UX manual
load, and deploy up to two editions of either Windows or Linux, using scripted
operating system installation software.
HA114A1
HA114A1
HA124A1
HA114A1
For more information http://www.hp.com/services/bladesystemservices
DA - 12671 North America — Version 6 — May 25, 2007
Page 20
QuickSpecs
HP Integrity BL860c Server Blade
Memory
DIMM installation guidelines:
1.
2.
3.
4.
5.
All DIMMs must be PC2-4200 DIMMs (DDR2 533MHz)
Both DIMM slots in a memory bank must be populated.
Banks must be populated in sequential numeric order, starting with bank 0.
Both DIMMs in a memory bank must be identical. Install identical DIMMs in pairs, starting with DIMM socket A, bank 0.
DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the smallest numbered DIMM slot.
HP Integrity BL860c Server Blade
Standard Memory
4GB Registered PC2-4200, DDR2 533MHz ECC DIMMs (4 x 1 GB)
Memory Bus Bandwidth:12.8 GB/s
Standard Memory Plus Optional Memory
Up to 48GB of PC2-4200, DDR2-533 DIMMs memory is available.
Memory
Standard
4GB
Maximum
48GB
Slot
0A
1GB
1A
1GB
0B
1GB
1B
1GB
2A
Empty
3A
Empty
2B
Empty
3B
Empty
4A
Empty
5A
Empty
4B
Empty
5B
Empty
0A
4GB
1A
4GB
0B
4GB
1B
4GB
2A
4GB
3A
4GB
2B
4GB
3B
4GB
4A
4GB
5A
4GB
4B
4GB
5B
4GB
Following are memory options available from HP:
HP 1GB REG PC2-4200 2x512MB 1RANK Kit
HP 2GB REG PC2-4200 2x1GB 1RANK Kit
HP 4GB REG PC2-4200 2x2GB 2RANK Kit
HP 8GB REG PC2-4200 2x4GB 2RANK Kit
NOTE: Must be installed in pairs.
NOTE: DIMMs must be installed in decreasing capacity with the largest DIMMs smallest numbered slot.
DA - 12671 North America — Version 6 — May 25, 2007
AD342A
AD343A
AD344A
AD345A
Page 21
QuickSpecs
HP Integrity BL860c Server Blade
Storage
1-2
2 x SFF SAS Hot Plug Hard Drives
Hard Drives
SAS Hard Drive
72GB 15,000 rpm SAS
SFF, SP
36GB 15,000 rpm SAS
SFF, SP
146GB 10,000 rpm SAS
SFF SP
72GB 10,000 rpm SAS
SFF, SP
36GB 10,000 rpm SAS
SFF, SP
Quantity
Supported
2
Position
Supported
1-2
Controller
LSI 1068
External Storage
Quantity
Position
Supported
Supported
Host Controller or Adapter
Modular Smart Array
Please see the External
Please see the Modular Smart Array 1000 QuickSpecs (URL
1000
Modular Smart
below) for the latest list of supported HBAs
Array 1000
QuickSpecs
below to
determine
configuration
requirements
Modular Smart Array 1000:
http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.HTML
DA - 12671 North America — Version 6 — May 25, 2007
Page 22
QuickSpecs
HP Integrity BL860c Server Blade
Power Specifications
NOTE: To review maximum system power ratings for facilities planning purposes use the Active Answers Blade Power Sizer
which is available via the online tool located at URL: http://h71019.www7.hp.com/ActiveAnswers/cache/347628-0-0-0121.html
DA - 12671 North America — Version 6 — May 25, 2007
Page 23
QuickSpecs
HP Integrity BL860c Server Blade
Technical Specifications
System Unit
Dimensions
Height
14.42 in (36.63 cm)
Depth
20.02 in (50.85 cm)
Width
2.03 in (5.16 cm)
Shipping Dimensions Height
21.50 in (54.61 cm)
Depth
23.13 in (58.75 cm)
Width
9.94 in (25.25 cm)
Weight
Maximum
22.8 lbs (10.3 kg)
Temperature Range*
Operating
10° to 35° C (50° to 95° F)
Non-Operating
-40° to 60° C (-40° to 140° F)
Storage
-20° to 60° C (-4° to 140° F)
Maximum Wet Bulb
30° C (86° F)
Temperature
Relative Humidity**
Operating
10% to 90%
Shipping
10% to 90%
Storage
10% to 95%
*NOTE: All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m
(1.8°F per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating
limit is 3,048m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or
30.3 KPa/4.4 psia.
**NOTE: Storage maximum humidity of 95% is based on a maximum temperature of 45°C
(113°F). Altitude maximum for storage corresponds to a pressure minimum of 70 KPa.
SAS RAID LSI 1068
Controller
Disk Drive and
Enclosure Interface
SAS Connectors
Cache Memory Speed
Server Interface
SAS Speed
Cache Memory
3G SAS (Serial Attached SCSI)
2 internal (SFF8484) x4 wide port connectors
DDR-1/266 MHz provides up to 4.2 GB/s maximum bandwidth.
x8 2.5G PCIe provides 2GB/s maximum bandwidth.
x8 3G SAS provides 2.4GB/s maximum bandwidth.
40-bit 64MB or 128MB cache: ECC protection, battery-backed, and
transportable
Up to 32 logical volumes
Logical Drives
Supported
Maximum Logical Drive 292GB (2 x 146GB)
Capacity
Host Memory
64-bit, supporting greater than 4GB server memory space
Addressing
RAID Support
RAID 1 (Mirroring)
Upgradeable Firmware Upgradeable Firmware
DA - 12671 North America — Version 6 — May 25, 2007
Page 24
QuickSpecs
HP Integrity BL860c Server Blade
Technical Specifications
Embedded Dual
Network Interface
Broadcom 5704 Gigabit Compatibility
NICs
1000Base-Sx
IEEE 802.3ab
1000Base-Sx
Data Transfer Method PCI Express, four lanes (x4)
Network Transfer Rate 1000Base-SX
2000 Mb/s
(Theoretical Maximum
Values)
Connector
RJ-45 (at SWM of
enclosure)
Cable Support
1000 Base-TX
Cable Support 1000 Base-TX Category 5 UTP
up to 328 ft (100 m)
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. AMD is a US registered trademark of
AMD Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12671 North America — Version 6 — May 25, 2007
Page 25
Download PDF