MODELS
MODEL
// E3D320VX
// E3D420VX
// E3D470VX
VBR140
USER
GUIDE
INSTALLING the Blu-ray player
CONTROLS & CONNECTIONS
basic operation
adjusting the player’s settings
TROUBLESHOOTING & SUPPORT
Help, SPECs, warranty & LEGAL
This product qualifies for ENERGY STAR in the “factory
default” setting and this is the setting in which power
savings will be achieved. Changing the factory default
picture settings or enabling other features will increase
power consumption that could exceed the limits
necessary to qualify for ENERGY STAR rating.

Table of Contents
Installing the Blu-ray Player............................... 3
Adjusting the Deep Color Setting..................................... 18
Inspecting the Package Contents...................................... 3
Adjusting the Audio Settings............................................... 19
Connecting the Player to an Electrical Outlet.................... 3
Changing the PCM Downsampling Rate......................... 19
Connecting the Player to your TV........................................ 3
Adjusting the Digital Audio Output.................................. 20
Connecting the Player to your Home Audio System........... 4
Activating or Deactivating Dynamic Range
Control (DRC)................................................................... 20
Connecting the Player to your TV and Home Audio
System with HDMI ............................................................... 5
Changing Language Settings............................................. 21
Setting Up your Network Connection.................................. 6
Changing the On-Screen Menu Language..................... 21
Connecting to a Wireless Network................................... 7
Changing the Disc’s Menu Language............................. 21
Connecting to a Wireless Network with WiFi Protected
Setup (WPS)...................................................................... 7
Changing the Audio Language....................................... 22
Controls & Connections.................................... 8
BD-Live Storage.................................................................... 22
Changing the Subtitle Language.................................... 22
Using Disc Playback Memory.............................................. 22
Front Panel........................................................................... 8
Setting the Parental Controls............................................... 23
Rear Panel........................................................................... 9
Setting the Parental Country............................................ 23
Remote Control................................................................... 10
Activating or Deactivating the Parental Controls............ 24
Replacing the Batteries.................................................... 11
Changing the Parental Code........................................... 24
Basic Operation................................................ 12
Changing the System Settings............................................ 25
Navigating the On-Screen Menu........................................ 12
Activating or Deactivating the Screen Saver................... 25
Playing a Disc...................................................................... 12
Activating or Deactivating Disc Autoplay........................ 26
Basic Playback Functions................................................. 13
Enabling or Disabling CEC Support................................. 26
Advanced Playback Functions........................................ 14
Setting Power Down Mode............................................... 26
Viewing USB Media - Audio and Images............................ 14
Updating the Player’s Firmware........................................ 27
USB Media Playback Controls.......................................... 15
Restoring the Player’s Factory Default Settings................. 27
Playing USB Photos and Audio.......................................... 15
Adjusting the Network Settings........................................... 28
Adjusting the Wired Settings............................................. 28
Adjusting the Player’s Settings.......................... 17
Setting Up a Wireless Connection Manually.................... 29
Adjusting the Display Settings............................................. 17
Setting Up a Wireless Connection Using WPS................... 29
Adjusting the Aspect Ratio............................................... 18
Viewing the Info Screen...................................................... 30
Activating Film Mode........................................................ 18
1

Table of Contents
Using Internet Apps....................................................... 31
Using the Netflix App........................................................... 31
Opening a Netflix Account............................................... 31
Using the VUDU App............................................................ 31
Opening a VUDU Account................................................ 31
Using the Pandora App....................................................... 32
Opening a Pandora Account........................................... 32
Using the HULU Plus App...................................................... 32
Opening a HULU Plus Account......................................... 32
Troubleshooting & Technical Support............... 33
Specifications.................................................... 35
Limited Warranty................................................ 36
Legal & Compliance......................................... 37
2
1
Installing the Blu-ray Player
Inspecting the Package Contents
connecting the player to your tv
Before installing your new Blu-Ray Player, take a moment to
inspect the package contents. Use the images below to ensure
nothing is missing or damaged.
Your Blu-ray player will easily connect to your TV. Before you
begin the installation, ensure your TV has an available HDMI port.
VIZIO Blu-Ray Player
HDMI
Quick Start Guide
HDMI
Remote Control with Batteries
Connecting the Blu-ray
Package Contents
To connect the player to the TV:
connecting the player to an electrical outlet
1. Ensure both the TV and the player are off.
Your player must be connected to a power source in order to
work. Connect the power cord to an electrical outlet as shown
below:
2. Connect the player and the TV using an HDMI cable. Ensure
each end of the cable is securely connected.
3. Turn the TV on.
4. Turn the player on by pressing the Power button on the
remote, or by touching the Power control on the front of the
player.
5. When you are ready to use the player, set the TV’s input to
the proper HDMI input. (Devices differ; see your TV’s user
manual for details on how to change the input source)
Connecting Power Cord
3
1
Connecting the player to your home audio
system
5. When you are ready to use the player, set your home audio
system’s input to optical. (Devices differ; see your audio
system’s user manual for details on how to change the
input)
Your player has a digital optical audio port. If your home audio
system is equipped with this port, you can connect it to your
player so you can enjoy theater-style surround sound.
Remember: You still need to connect the player to
your television to view video. See Connecting the
Player to Your TV on page 5.
If the player is correctly connected, you will hear audio from your
home audio system speakers when a disc is played.
For best quality sound, connect your player to your
home audio system using an HDMI cable. See the
next page for instructions.
To connect the player to your home audio system:
1. Ensure both your home audio system and the player are off.
2. Connect the player to the home audio system using an
optical cable. See the Home Audio Connection Chart below.
3. Turn the player on by pressing the Power button on the
remote, or by pressing the Power button on the front of the
player.
4. Turn your home audio system on.
VIZIO Blu-ray Player
Home Audio Receiver
Best Sound
Up to
5.1 Channels
OPTICAL
Optical (SPDIF) Cable
OPTICAL
Home Audio Connection Chart
4
1
connecting the player to your tv and home
audio system with hdmi
Your player can output high-definition digital audio via the HDMI
port, enabling you to enjoy up of 7.1 channels of surround sound
using your home audio system.
To connect the player to your home audio system with HDMI:
Your TV
1. Ensure both your home audio system and the player are off.
2. Connect the player to the home audio system and TV as
shown in the HDMI Connection Chart below.
3. Turn the power on by pressing the Power button on the
remote, or Power button on the front of the player.
HDMI
4. Turn your TV and home audio system on.
5. When you are ready to use the player, set your home audio
system’s input to the player’s connection. Set your TV’s input
to the proper HDMI connection.
HDMI
OUT
VIZIO Blu-ray Player
Home Audio Receiver
HDMI
HDMI Cable
HDMI
Best Sound
and Video
Up to
7.1 Channels
HDMI Connection Chart
5
1
Setting up your network connection
To connect to a wired network:
1. Ensure you have:
Your player is network-ready, and can be connected to your
home network using the RJ45 (ethernet) connector on the back
panel.
• An ethernet cable long enough to connect the player to
your router or modem
• A router or modem with an available ethernet port
Once you have connected to your home network and the
Internet, you can use Internet Apps to deliver popular online
content to your player.
• A high-speed Internet connection
2. Connect your ethernet cable to the router and to the
ethernet port on the back of the TV.
For the most reliable network performance, a wired
connection is recommended.
3. Turn on the player and your TV. Use the Left/Right Arrow
buttons to highlight Settings and press OK. Then highlight
Network and press OK. Then highlight Connection Type,
press OK and select Ethernet.
Ethernet cables are available from many retailers in
lengths of up to 50 feet.
Router / Modem
VIZIO Blu-ray Player
Ethernet Cable
Setting Up Your Network Connection
6
1
Connecting to a Wireless Network with WiFi Protected Setup
(WPS)
Connecting to a Wireless Network
For the most reliable network performance, a wired
connection is recommended.
Ethernet cables are available from many retailers in
lengths of up to 50 feet.
To connect to a wireless network:
Wi-Fi Protected Setup is an easy way to connect the Player to your
home wireless network.
1. Ensure you have:
• A router broadcasting a high-speed wireless signal
(802.11n recommended)
To connect using WPS:
1. Ensure you have:
• A high-speed Internet connection
• A router with a WPS button, broadcasting a high-speed
wireless signal (802.11n recommended)
2. Press the Power button on the remote to turn the player on.
Turn your TV on and select the input to which the Blu-ray
player is connected.
• A high-speed Internet connection
2. Press the Power button on the remote to turn the player on.
Turn the TV on and and select the input to which the Blu-ray
player is connected.
3. Use the Left/Right Arrow buttons on the remote to highlight
Settings, then press OK.
4. Use the Up/Down Arrow buttons on the remote to highlight
Network, then press OK.
3. Use the Left/Right Arrow buttons on the remote to highlight
Settings, then press OK.
5. Use the Up/Down Arrow buttons on the remote to highlight
Connection Type, then press OK.
4. Use the Up/Down Arrow buttons on the remote to highlight
Network, then press OK.
6. Use the Up/Down Arrow buttons on the remote to highlight
Wireless, then press OK. A confirmation window is displayed,
highlight Yes to continue.
5. Use the Up/Down Arrow buttons on the remote to highlight
Connection Type, then press OK.
6. Use the Up/Down Arrow buttons on the remote to highlight
Wireless, then press OK. A confirmation window is displayed,
highlight Yes to continue.
7. Use the Up/Down Arrow buttons to select Scan to have your
player search for available wireless networks.
8. If your network is password-protected, enter your password
using the buttons on the remote. When you are finished
select Enter, and then Next to continue.
7. Use the Up/Down Arrow buttons to select Auto WPS.
8. Follow the on screen instructions to complete the WiFi
Protected Setup.
9. When your player has connected, a success message is
displayed. Select OK to complete the wireless setup.
7
2
Controls and Connections
front Panel
Disc Tray
To insert a disc, press the Eject Button first then
place a disc onto the tray.
USB Port
Insert USB thumb drive to play photos and music.
Supported files include .jpg and .mp3.
Eject Button
Press to eject the disc tray.
Power Button
Press to turn Player on or off.
Front Panel
8
2
Rear Panel
Digital Optical Audio Out
Power Cord
Connect an optical cable* to an external audio device.
Ethernet
Connect an Ethernet cable* to your router or modem.
HDMI Out
Connect an HDMI cable* to your TV.
RCA Stereo Audio Out
Connect an RCA cable* to an external audio device.
Rear Panel
9
2
Remote Control
eject
Eject the disc.
Power
Turn Player on or off.
app LAUNCHER
Quickly launch app on button.
Play/Pause
Press to play or pause disc.
rewind/FAST FORWARD
Press repeatedly to increase speed.
previous/Next
Go to the next track or chapter on
disc.
stop
Halt playback.
disc menu
Open the disc menu.
setup
Open the Setup menu.
ok
Select the highlighted menu
option.
ARROW
Navigate on-screen menus.
title menu
Open disc title menu.
return
Go to the previous menu screen.
app shortcuts
Control Internet Apps and other
disc functions. Press Red to exit
apps.
v button
Open the Player main menu.
vizio tv Volume
Adjust volume or mute a VIZIO TV.
PIP
Enable picture-in-picture.*
subtitle
Change disc subtitle track.*
Info
Open disc info window.
AUDIO
Change disc audio track.*
TV res
Change output resolution of the
Player.
repeat
Continuously play selected track*
Angle
Select viewing angle.*
A-B
Create a playback loop.*
cancel
Clear entered numbers/letters.
search
Find specific title, chapter, or time.*
Number pad
Manually enter a channel.
Remote Control
*Supported discs only.
10
2
Replacing the Batteries
Replacing Batteries
1. Remove the battery cover.
2. Insert two batteries into the remote control. Make sure that
the (+) and (-) symbols on the batteries match the (+) and
(-) symbols inside the battery compartment.
3. Replace the battery cover.
• Use only good quality batteries.
• Inserting the batteries incorrectly may result in
cracking or leakage that may cause a fire or
result in injury.
• Dispose of old or dead batteries in accordance
with local hazardous waste regulations.
• Keep batteries away from children and pets.
11
3
Basic Operation
In this chapter, you will learn how to:
Playing a Disc
• Navigate the On-Screen Menu
Your player can play several kinds of discs. Use this table to ensure
your disc is compatible with the player:
• Play a Disc
• View USB Media
Navigating the On-Screen Menu
Type of Disc
Blu-ray
DVD Video
Audio CD
On-Screen Menu
To highlight an icon or menu setting, press the Arrow buttons on
the remote. The highlighted icon or menu setting will glow light
blue.
To select an icon or menu setting, highlight the icon or menu
setting and press OK button on the remote.
To go back to a previous screen, press the RETURN
button.
12
DVD-R
DVD+R
DVD-RW
DVD+RW
Logo
3
To play a disc:
Basic Playback Functions
When playing a disc, you can use buttons on the remote to
manipulate the playback in several ways:
1. Press the Eject button on the
remote or touch the Eject
control on the front of the
player.
Play/Pause
The disc tray opens.
Rewind
Previous
2. Insert your disc. Place the disc,
label side up, into the disc tray.
Fast Forward
Next
Stop
Basic Playback Buttons
Previous: Skip to last chapter or track.
Next: Skip to next chapter or track.
Rewind: Reverse playback. Press repeatedly to increase
the speed. Speeds are x2, x4, x8, x16, x32,
and x64. Press Play/Pause to resume normal
playback.
Play/Pause: Pause playback. Press again to resume normal
playback.
Fast For- Increase speed of playback. Press repeatedly to
ward: increase the speed. Speeds are x2, x4, x8, x16,
x32, and x64. Press Play/Pause to resume normal
playback.
Stop: Halt playback.
3. Press the Eject button on the
remote or touch the Eject
control on the front of the
player.
The disc tray closes.
4. Using the Arrow buttons on the remote, highlight Play Disc
and press SELECT. The disc plays.
If Disc Auto Playback is turned ON then the movie will
load automatically.
13
3
Advanced playback functions
Viewing USB Media - Audio and Images
Your player also features advanced playback functions.
Your player features a USB port where you can connect and
share a USB thumb drive containing your photos and music.
The player supports the following file types:
Subtitle
PIP
Info
Media Type
File Types
Audio
.mp3
.aac
Audio
TV Res
Repeat
Angle
A-B
Images
Advanced Playback
PIP: Enable picture-in-picture (Supported discs only.)
Info: Display the Info Bar. Press again to close the Info Bar.
TV Res: Change the output resolution. Press repeatedly to cycle
through available resolutions.
Angle: Some video discs are recorded using multiple camera
angles. Press to change viewing angle. (Supported discs
only.)
Subtitle: Open subtitle menu. Press again to close. See Changing
the Subtitle Language on page 22. (Supported discs only.)
Audio: Open audio menu. Press again to close. See Adjusting the
Audio Settings on page 19. (Supported discs only.)
A-B: Loop a segment of audio or video. Press at the beginning
of the desired segment, and again at the end. Segment will
loop until the REPEAT button is pressed. (Supported discs
only.)
Repeat: Change repeat mode (Supported discs only):
• All - Repeat all tracks in order.
• Random - Repeat all tracks randomly.
• Track - Repeat the currently playing track.
• Off - Resume normal playback.
14
.jpg
.jpeg
.png
3
USB Media Playback Controls
Playing USB Photos and Audio
When listening to USB audio, you can control the playback using
buttons on the remote.
To play USB media, you must first save your music or images onto
a USB thumb drive.
Remember:
• The USB thumb drive must be formatted as FAT32.
• Files on the USB thumb drive must end in a supported file
extension (.mp3, .jpg, etc).
Play/Pause
Rewind
Previous
Fast Forward
Next
• The player will not play media from external hard drives
or mp3 players.
To play your USB media:
1. Turn the player off. Connect
your USB thumb drive to the
USB port on the front of the
player.
Stop
USB Playback Buttons
Previous: Play the file listed before the currently-playing file.
(Audio only.)
Next: Play the file listed after the currently-playing file.
(Audio only.)
Rewind: Reverse playback. Press repeatedly to increase
the speed. Speeds are x2, x4, x8, x16, x32,
and x64. Press Play/Pause to resume normal
playback.
Play/Pause: Pause playback. Press again to resume normal
playback.
Fast For- Increase speed of playback. Press repeatedly to
ward: increase the speed. Speeds are x2, x4, x8, x16,
x32, and x64. Press Play/Pause to resume normal
playback.
Stop: Halt playback.
2. Press the Power button on the
remote or press the Power
button on the front of the
player to turn it on.
Power
Power
The REPEAT button can be used with USB audio files as it is with
disc media.
15
3
3. Use the Arrow buttons on the
remote to highlight My Media,
then press OK.
4. Use the Up/Down Arrow
buttons to highlight the media
type you want to play, then
press OK.
5. Use the Arrow and OK buttons
on the remote to locate your
media file in the file browser.
Highlight the file and press OK.
The media file will begin to
play.
The photo slide show will begin playing automatically beginning
with the photo you have chosen.
Do not remove the USB thumb drive while the player is on. Doing
so may damage the drive.
16
4
Adjusting the Player’s Settings
Your player is preset to work with most setups out of the box, but if
you would like to adjust any of the player’s settings, you can use
the on-screen menu to do so. The Settings menu is divided into
these parts:
1. From the Display menu, use the
Up/Down Arrow buttons on the
remote to highlight Output to
TV and press OK. Then highlight
Resolution and press OK.
• General Setting
• Display Setting
• Audio Setting
• System Information
2. Using the Arrow buttons, highlight the highest resolution your
TV can display, then press OK.
Adjusting the Display Settings
If your TV is connected to the player using HDMI, select
HDMI Auto. The player will detect the best display resolution
automatically.
From the Display menu, you can adjust the way the player
displays your video.
To access the Display menu:
If you choose a resolution unsupported by your TV, you will see
an error message.The resolution will revert to its previous setting.
1. Turn on the player and your TV.
Use the Arrow buttons on the
remote to highlight Settings
and press OK.
Only HDMI connections can display 1080p video.
2. Use the Arrow buttons on the
remote to highlight Display
Setting and press OK.
Your current settings are
displayed to the right of each
menu option.
Changing the Display Resolution
For the best viewing experience, you should adjust the player’s
settings so that it outputs video in a resolution supported by your
TV.
To change the display resolution:
17
4
Adjusting the Aspect Ratio
Activating Film Mode
If video displayed from the player appears distorted or otherwise
incorrect, you may need to adjust the aspect ratio of the player
to match that of your TV. (Devices differ; see your TV’s user manual
to determine its aspect ratio.)
Movies are recorded on film at a rate of 24 pictures, or frames, per
second. Many of the movies on Blu-ray discs are formatted at this
frame rate (24 frames/second). However, not all TVs can display
this format.
To adjust the aspect ratio:
If the player is connected to your TV via HDMI and is capable of
displaying 24 frames/second, you can activate Film Mode for a
better viewing experience.
1. From the Display menu, use the
Up/Down Arrow buttons on the
remote to highlight Output to
TV and press OK. Then highlight
TV Screen and press OK.
To activate/deactivate Film Mode:
1. From the Display menu, use the
Up/Down Arrow buttons on the
remote to highlight Output to
TV and press OK. Then highlight
HDMI 1080p 24Hz then press
OK.
2. Highlight the aspect ratio that most closely matches that of
your TV and press OK:
2. Highlight On or Off and press OK.
• 16:9 Full - Use this setting if you have a “widescreen”
television. When using this setting, video formatted in 4:3
will be stretched horizontally to fit the screen.
Adjusting the Deep Color Setting
The player is capable of outputting 36-bit color over HDMI. For
the best viewing experience, the deep color setting should be
adjusted to match your TVs display capabilities.
• 16:9 Normal - Use this setting if you have a “widescreen”
television. When using this setting, video formatted in
4:3 will be displayed in the center of the screen. Vertical
bars will be displayed on the left and right edges of the
picture.
To adjust the Deep Color setting:
1. From the Display menu, use the
Up/Down Arrow buttons on the
remote to highlight Resolution
and press OK.
• 4:3 Pan&Scan - Use this setting if you have a “traditional”
screen (nearly square). When using this setting, movies in
widescreen format will be centered and the left and right
edges of the picture may be cut off.
• 4:3 Letterbox - Use this setting if you have a “traditional”
screen (nearly square). When using this setting, movies in
widescreen format will be fully displayed, with black bars
on the top and bottom of the picture.
2. Highlight the highest color setting that your TV can display.
(Devices differ; see your TV’s user manual for details.)
18
4
Adjusting the Audio Settings
Changing the PCM Downsampling Rate
This setting should be adjusted if your home audio receiver can
process high-bitrate PCM signals over the Optical/SPDIF port.
The settings in the Audio Menu configure the player’s digital
audio outputs (HDMI or Optical/SPDIF).
To access the Audio Menu:
If you are unsure about how to adjust this setting, leave the
PCM Downsampling rate at 48 kHz.
1. Turn on the player and your TV.
Use the Arrow buttons on the
remote to highlight Settings
and press OK.
Changing this setting has no effect if your audio is connected
via HDMI cable.
If you have the player connected to a home audio receiver
and your receiver can process high-bitrate PCM signals:
1. From the Audio menu, use
the Up/Down Arrow buttons
on the remote to highlight
PCM Down Sample and
press OK.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK.
The Audio drop-down menu is
displayed. Your current settings
are displayed to the right of
each menu option.
2. Highlight the highest
downsampling rate your
reciever can process and
press OK. (Devices differ; see
your receiver’s user manual
for details.)
19
4
Adjusting the Digital Audio Output
Activating or Deactivating Dynamic Range Control (DRC)
This setting changes the type of digital audio data the player
outputs over HDMI and Optical/SPDIF. Depending on your setup,
you may need to try several settings.
When activated, this setting normalizes the volume of a disc’s
audio track. The loudest parts of the soundtrack will be quieter,
and the quietest parts will be louder. This effect can be useful
when viewing movies late at night, when others might be sleeping.
1. From the Audio menu, use the
Up/Down Arrow buttons on
the remote to highlight Digital
Audio Output and press OK.
To use this setting, your player’s audio must be connected
with HDMI or Optical/SPDIF, and digital output must be set to
Bitstream Mixed or PCM.
To activate or deactivate Dynamic Range Control:
1. From the Audio menu, use the
Up/Down Arrow buttons on the
remote to highlight DRC and
press OK.
2. Highlight the digital audio format best suited to your home
audio receiver (Bitstream, PCM, or Reencode) and press OK.
2. Use the Arrow buttons on the remote to highlight On, Off, or
Auto and press OK.
Selecting Auto for this setting turns on Dynamic Range Control
for all Blu-ray soundtracks except Dolby TruHD.
20
4
Changing Language settings
Changing the Disc’s Menu Language
Changing the On-Screen Menu Language
Using this setting, you can change the language that is displayed
when a disc’s main menu is displayed.
To access the Language menu:
Not all languages are available on all discs. Most discs have
only one menu language available.
1. Turn on the player and your TV.
Use the Arrow buttons on the
remote to highlight Settings
and press OK.
To change the disc’s menu language:
1. From the Language menu, use
the Up/Down Arrow buttons
on the remote to highlight Disc
Menu and press OK.
The Settings menu is displayed.
2. Use the Arrow buttons on the
remote to highlight Language
and press OK.
Your current settings are
displayed to the right of each
menu option.
2. Use the Arrow buttons on the remote to highlight a
language of your choice and press OK.
The player currently only offers English for the On-Screen
menus. Additional languages may become available with
future updates.
21
4
Changing the Audio Language
bd-live storage
This setting changes the spoken language on a played disc.
When a USB storage device is connected to the USB port, the
player can use its memory for BD-Live storage.
Not all languages are available on all discs. Most discs have
only one or two audio languages available.
To view the available BD-Live storage:
1. From the System menu, use the
Up/Down Arrow buttons on
the remote to highlight BD-Live
Memory and press OK.
To change the disc’s audio language:
1. From the Language menu, use
the Up/Down Arrow buttons
on the remote to highlight Disc
Audio and press OK.
Selecting Format will clear all BD-Live content stored on the USB
storage device.
2. Use the Arrow buttons on the remote to highlight a
language of your choice and press OK.
using disc playback memory
Changing the Subtitle Language
Disc bookmarks are used by the player to resume playback at
the point the disc was halted.
This setting changes the default subtitle language when playing
a disc.
To enable or disable Disc Playback memory:
1. From the Playback menu, use
the Up/Down Arrow buttons
on the remote to highlight Last
Memory and press OK.
To change the subtitle language:
1. From the Language menu, use
the Up/Down Arrow buttons
on the remote to highlight Disc
Subtitle and press OK.
Then highlight On or Off to
enable/disable Disc Playback
Memory.
2. Use the Arrow buttons on the remote to highlight a
language of your choice and press OK.
You cannot “undo” a memory erase, but it will not damage the
player in any way.
22
4
Setting the Parental Controls
Setting the Parental Country
The player’s parental controls allow you to prevent the player
from displaying certain rated content without a password.
Because countries have their own rating systems, if you are going
to use the Parental Controls, you should set the parental country
to match the country in which you live.
To access the Parental Controls menu:
Some discs do not support multiple country-based rating
systems.
1. Turn on the player and your TV.
Use the Arrow buttons on the
remote to highlight Settings
and press OK. Then highlight
Security and press OK.
You may be prompted to enter your Parental Code. If you have
not yet set the code, enter 0000.
To set the parental country:
1. From the Security menu, use
the Up/Down Arrow buttons on
the remote to highlight Country
Code and press OK.
2. Use the Arrow buttons on the
remote to highlight Parental
Control and press OK.
You may be prompted to enter your Parental Code. If you have
not yet set the code, enter 0000.
You may be prompted to enter your Parental Code. If you have
not yet set the code, enter 0000.
2. Use the Up/Down Arrow and OK buttons to highlight the
country in which you live.
23
4
Activating or Deactivating the Parental Controls
Changing the Parental Code
Use this setting to turn the parental controls on or off and restrict
playback of discs encoded with a rating level equal to or higher
than the level you choose.
If you use the parental controls, you should change the passcode
from the default to prevent children from accessing inappropriate
material.
You may be prompted to enter your Parental Code. If you have
not yet set the code, enter 0000.
You may be prompted to enter your Parental Code. If you have
not yet set the code, enter 0000.
To activate/deactivate the parental controls:
To change the parental code:
1. From the Security menu, use
the Up/Down Arrow buttons
on the remote to highlight
Parental Control and press OK.
1. From the Security menu, use
the Up/Down Arrow buttons
on the remote to highlight
Change Password and press
OK.
2. Using the Arrow buttons on the remote, highlight the highest
rating level you wish to allow, then press OK.
2. Using the Keypad on the remote, enter a new 4-digit
parental passcode. Then re-enter the code to confirm it.
For example, if you only want the player to display content
rated PG or below, select PG.
3. Write down your passcode and store it in a secure location.
Content ratings will vary according to your country.
Not all discs have parental controls enabled.
24
4
Changing the System Settings
Activating or Deactivating the Screen Saver
The screen saver features a floating Vizio logo that will appear
after a period of inactivity. This can prevent image “burn in” on
your TV.
The System menu allows you to customize autoplay function,
power options, and the screen saver. From this menu, you can
also reset the player to its factory defaults.
To set the screen saver:
To access the System menu:
3. From the System menu, use the
Up/Down Arrow buttons on
the remote to highlight Screen
Saver and press OK.
1. Turn on the player and your TV.
Use the Arrow buttons on the
remote to highlight Settings
and press OK.
The Settings menu is displayed.
4. Use the Arrow buttons to highlight On or Off then press OK.
2. Use the Arrow buttons on the
remote to highlight System and
press OK.
Your current settings are
displayed to the right of each
menu option.
25
4
Activating or Deactivating Disc Autoplay
Setting Power Down Mode
When this option is activated, the player will automatically play
an inserted disc.
The player has two Power Down Modes for you two choose from.
To select the different Power Down Modes:
When this option is deactivated, you will need to select Play Disc
to play a disc.
1. From the System menu, use the
Up/Down Arrow buttons on
the remote to highlight Power
Down Mode and press OK.
Autoplay does not mean that the player will start a movie.
The disc will load and usually the disc’s main menu will be
displayed.
To Activate/Deactivate Disc Autoplay:
1. From the System menu, use the
Up/Down Arrow buttons on the
remote to highlight Disc Auto
Playback and press OK.
2. Use the Arrow buttons to highlight Energy Saving or Quick
Start.
• Energy Saving: Powers the player down to a full standby.
• Quick Start: Keeps the player suspended for a quick
power on.
2. Using the Up/Down Arrow buttons on the remote, highlight
On or Off, then press OK.
Enabling or Disabling CEC Support
When enabled, CEC (Consumer Electronic Control), allows you
to control your Blu-ray player using your TV remote. For CEC to
work, your player must be connected to your TV with an HDMI
cable, and your TV must support CEC. (Not all manufacturers
enable CEC for all products.)
To enable or disable CEC support:
1. From the System menu, use the Up/Down Arrow buttons on
the remote to highlight CEC and press OK.
2. Use the Arrow buttons to highlight On or Off, then press OK.
26
4
Updating the Player’s Firmware
Restoring the Player’s Factory Default Settings
To ensure your player has the most current firmware, you should
occasionally update via Disc, USB Storage device, or Network.
This setting allows you to restore menu and Internet App options
to their factory defaults.
To restore a setting to the factory default:
Network update requires Internet connection. USB and Disc will
update from a USB storage device or CD/DVD.
1. From the System menu, use the
Up/Down Arrow buttons on
the remote to highlight Factory
Reset and press OK.
To update your player’s firmware:
1. From the System menu, use the Up/Down Arrow buttons on
the remote to highlight Upgrade and press OK. Then select
either Disc, USB Storage, or Network.
2. Confirm that you want to update the player. Highlight OK
and press OK.
2. Use the Arrow and OK buttons to highlight and press OK.
You must have the proper firmware file on your CD/DVD or USB
storage device before upgrading your player’s firmware.
27
4
Adjusting the Network Settings
Adjusting the Wired Settings
In order to access BD-Live or Internet Apps, your player must be
connected to your home network and to the internet.
If your player is connected to your home network with an ethernet
cable, the player will automatically detect the connection. You
can manually adjust the settings, but VIZIO recommends this for
advanced users only.
To access the Network menu:
To adjust the wired settings:
1. Turn on the player and your TV.
Use the Arrow buttons on the
remote to highlight Settings
and press OK.
1. From the Network Menu, use
the Arrow buttons on the
remote to highlight IP Setting
and press OK.
The Settings menu is displayed.
2. Use the Arrow buttons on the remote to highlight Manual
and press OK.
2. Use the Arrow buttons on the
remote to highlight Network
and press OK.
To change the individual IP settings, IP Mode must be set to
Manual.
3. Use the Arrow and OK buttons
on the remote to change each
of the IP Mode settings:
• IP Address
• Subnet Mask
• Default Gateway
• DNS1
• DNS2
If you are unsure what values to enter, contact your Internet
Service Provider (ISP) for assistance.
4. When you are finished, highlight Apply and press OK.
28
4
Setting Up a Wireless Connection Manually
Setting Up a Wireless Connection Using WPS
If you have a wireless home network, including a wireless router
or modem and an internet connection, you can set up the player
to connect wirelessly.
Many newer routers feature WiFi Protected Setup, which allows
you to setup a wireless network without manually entering
connection information. Follow the instructions in this section if
your WPS-enabled router has a WPS button.
To set up a wireless connection manually:
To set up a wireless connection using a WPS button:
1. From the Network Menu, use
the Arrow buttons on the
remote to highlight Wireless
Setting and press OK.
1. From the Network Menu, use
the Arrow buttons on the
remote to highlight Wireless
Setting and press SELECT.
2. Use the Arrow buttons on the
remote to highlight Scan and
press OK.
2. Use the Arrow buttons on the
remote to highlight Auto WPS
and press OK.
A list of available wireless
networks is displayed.
3. Use the Arrow buttons on the
remote to highlight the name
of your home wireless network,
then press OK.
3. When prompted by the player,
press the WPS button on your
router.
When the router and player
have established a connection,
the WPS screen will display
Success.
If your network is passwordprotected, you are prompted
to enter a password. Enter your
password using the remote.
When finished, highlight Next
and press OK.
29
4
Viewing the Info Screen
The info screen displays the following information:
• Software Version
• Interface
• MAC Address
• IP Address
To access the info screen:
1. Turn on the player and your TV.
Use the Arrow buttons on the
remote to highlight Settings
and press OK.
The Settings menu is displayed.
2. Use the Arrow buttons on the
remote to highlight System
Information and press OK.
The info screen is displayed.
30
5
Using Internet Apps
buttons on the remote to highlight No and press OK on the
remote. Then highlight Start your FREE trial and press OK on
the remote. Follow the on screen instructions to begin your
free trial.
For Netflix support, go to
www.netflix.com/help or call
1-866-579-7113.
Using the VUDU App
Your player has the VUDU App built-in. With it, you can stream
high-definition movies and TV programs from the internet to your
TV. VUDU also features popular applications like Facebook and
Twitter.
Apps cannot be added manually. Additional apps may
become available with future device updates.
Using the Netflix App
To use VUDU, you must first:
Your player has the Netflix App built-in. With it, you can stream
movies, television shows, and other content from the internet to
your TV.
• Have a high-speed internet connection and a home
computer.
To use Netflix, you must first:
• Have a valid VUDU account.
• Connect your player to your home network. See page 28.
• Have a high-speed internet connection and a home
computer.
Opening a VUDU Account
To use VUDU, you must first open an account. This can be
completed using the on-screen menu and your home computer.
• Connect your player to your home network. See page 28.
• Have a valid Netflix account.
1. Turn on your player and the TV.
Opening a Netflix Account
Using the Arrow buttons on the remote, highlight VUDU and
press the OK button on the remote. The VUDU Apps screen is
displayed.
To use Netflix, you must first open an account. This can be
completed using the on-screen menu and your home computer.
To open a Netflix account:
2. Using the Arrow buttons on the remote, highlight VUDU
Movies and press OK. The VUDU home screen is displayed.
1. Turn on your player and the TV.
3. Highlight Start Free Trial and press OK.
Using the Arrow buttons on the remote, highlight Netflix and
press the OK button on the remote.
4. Using the Arrow and OK buttons, select New User.
2. Netflix will ask you if you are a member. Use the Arrow
5. Use the onscreen keyboard to enter your e-mail address and
31
5
press Done. You will now receive an e-mail from VUDU.
For Pandora support, go to www.pandora.com/support
6. Use your home computer to read the VUDU e-mail. Click the
Complete Account Setup button in the body of the e-mail.
Complete the account setup by following the instructions on
the VUDU website.
For VUDU support, go to
www.VUDU.com/support or call 1-888-554-8838.
Using the HULU Plus App
Hulu Plus is an online video service that offers a selection of hit
shows, clips, movies and more.
To use HULU Plus, you must first:
• Have a high-speed internet connection and a home
computer.
Using the Pandora App
• Connect your player to your home network. See page 28.
Pandora is a personalized internet-based radio service that is
designed to help you discover new music while you listen to
music you already know and enjoy.
• Have a valid Hulu Plus account.
Opening a HULU Plus Account
To use Pandora, you must first:
To open a HULU Plus account:
• Have a high-speed internet connection and a home
computer.
1. Turn on your player and the TV.
• Connect your player to your home network. See page 28.
Use the Arrow buttons on the remote to highlight HULU Plus.
Press the OK button.
• Have a valid Pandora account.
Opening a Pandora Account
When asked if you are already a HULU Plus subscriber,
highlight No and press OK.
To use Pandora, you must first open an account. This can be
completed using the on-screen menu and your home computer.
2. A welcome screen is displayed. Write down the Referral
Code.
To open a Pandora account:
7. Turn on your player and the TV.
3. On your home computer, go to www.HULU.com/plus/vizio
and follow the account setup instructions.
Using the Arrow buttons on the remote, highlight Pandora
and press the OK button on the remote.
Enter the Referral Code when prompted.
The Pandora App Welcome screen is displayed.
8. When asked if you already have a Pandora account,
highlight No and press OK.
Follow the on-screen instructions. You will need to go to the
Pandora web site using your home computer.
32
Troubleshooting & Technical Support
A
do you have questions?
LET US HELP!
YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT
The VIZIO support team is highly trained
and is based in the United States.
We can help with:
• New Product Setup
• Connecting Your Devices
• Technical Problems
• And More
Phone: (877) 878-4946 (TOLL-FREE)
Email: techsupport@VIZIO.com
Web: www.VIZIO.com/support
Hours of operation: Monday - Friday: 5 am to 8 pm (PST)
Saturday - Sunday: 8 am to 4 pm (PST)
We speak English • Se habla Español • Nous parlons Français
33
A
I cannot connect the Player to my network.
There is no power.
•
Ensure the power cord is securely connected to a working
electrical outlet.
•
Unplug the modem/router and the Player. Wait 10 seconds, then
turn them back on.
•
Press the Power/Standby button on the remote or touch the
Power/Standby control on the player.
•
Ensure the ethernet cable is securely connected to both the
Player and your modem/router.
•
Try plugging the power cord into a different electrical outlet.
•
Refer to your modem/router user guide.
The picture quality seems low.
Nothing happens when I press buttons on the remote.
•
Place new batteries in the remote. Ensure the batteries are
inserted correctly.
•
Connect the Player to your TV using an HDMI cable for the best
picture quality.
•
Ensure no objects are blocking the front of the Blu-ray Player
•
•
When using the remote, point it directly at the Blu-ray Player.
Connect the Player to an HDTV capable of displaying 720p or
1080p for the best picture quality.
•
If you see , the action you are trying to perform is not allowed
by the Player or disc.
•
Ensure the cables connecting the Player to your TV are securely
connected.
•
Watch Blu-ray discs for the best picture quality. DVD discs are
limited to 480p resolution.
•
To view streaming video (Netflix, VUDU, Amazon, HULU), a
high-speed wired/wireless Internet connection is required.
My Blu-Ray or DVD disc does not play.
•
Ensure the disc is clean and free of scratches.
•
If you are using parental controls, the disc may not play.
I am having trouble with Internet Apps.
•
If you experience issues with Apps, please contact:
Netflix:
Pandora:
VUDU:
Amazon:
www.netflix.com/help or 1-866-579-7113
www.pandora.com/support
www.VUDU.com/support or 1-888-554-8838
Select the Contact Us button in the right-hand column
of the Help page in the App.
HULU Plus: www.hulu.com/help
34
B
Specifications
Dimensions:
Weight:
12.6 x 1.4 x 8.2 inches
320 x 36 x 209 mm
2.7 lbs
1.2 kg
Blu-ray Disc Resolutions of 1080p (HDMI
Out) 1080i / 720p / 480i / 480p (HDMI)
Resolutions
DVD, DVD-R, DVD-RW Selectable Resolutions
Supported: of 1080p (HDMI) 1080i / 720p / 480i / 480p
(HDMI)
Audio:
CD, CD-R, CD-RW, MP3, WMA Support
5.1, 7.1 PCM Digital Audio via HDMI
24-bit / 192KHz Audio DAC
Dolby:
Dolby Digital / Dolby Digital Plus /
Dolby Digital TrueHD
DTS:
Ethernet Ports:
WiFi:
DTS Digital Surround /
DTS HD Advanced Digital Out
1
802.11n
USB 2.0 Inputs:
1
HDMI Ports:
1
Digital Audio Ports:
OSD Languages:
Energy Star Qualified:
Warranty:
1 (Optical/SPDIF)
English
Yes
1 year
35
C
Limited Warranty
ON PARTS AND LABOR
VIZIO authorized service center. Products with unreadable or removed
serial numbers, or requiring routine maintenance are not covered. This
one year limited warranty does not cover Products sold “AS IS”, “FACTORY
RECERTIFIED”, or by a non-authorized reseller.
Covers units purchased as new in United States and Puerto Rico Only.
VIZIO provides a warranty to the original purchaser of a new Product
against defects in materials and workmanship for a period of one (1) year
of non-commercial usage and ninety (90) days of commercial use. If a
Product covered by this warranty is determined to be defective within the
warranty period, VIZIO will either repair or replace the Product at its sole
option and discretion.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED
ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE
LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL
LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY
CAUSE WHATSOEVER INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE,
OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR
LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION
OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER
INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS
OR EXCLUSIONS MAY NOT APPLY TO YOU.THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT NOTICE.
To obtain warranty service, contact VIZIO Technical Support via e-mail:
TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877.698.4946) from
6:00AM to 9:00PM Monday through Friday and 8:00AM to 4:00PM Saturday
and Sunday, Pacific Time, or visit www.VIZIO.com. PRE-AUTHORIZATION MUST
BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER.
Proof of purchase in the form of a purchase receipt or copy thereof is
required to show that a Product is within the warranty period.
Parts and Labor
There will be no charge for parts or labor during the warranty period.
Replacement parts and Products may be new or recertified at VIZIO’s
option and sole discretion. Replacement parts and Products are warranted
for the remaining portion of the original warranty or for ninety (90) days
from warranty service or replacement, whichever is greater.
CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.
Personal Data
If your VIZIO product is capable of storing personal data and other
information, ALL CONTENTS AND INFORMATION WILL BE DELETED IN THE
COURSE OF SOME IN-HOME AND ALL SHIP-IN WARANTY SERVICE. If this occurs,
your product will be restored to you configured as originally purchased.
You will be responsible for restoring all applicable data and passwords.
Recovery and reinstallation of user data is not covered under this Limited
Warranty. In order to protect your personal information, VIZIO recommends
that you always clear all personal information from the unit before it is
serviced, regardless of the servicer.
Type of Service
Defective Products must be sent to a VIZIO service center to obtain warranty
service.VIZIO is not responsible for transportation costs to the service center,
but VIZIO will cover return shipping to the customer. PRE-AUTHORIZATION IS
REQUIRED BEFORE SENDING ANY PRODUCT TO A VIZIO SERVICE CENTER FOR
WARRANTY SERVICE.
Product returns to VIZIO’s service centers must utilize either the original
carton box and shipping material or packaging that affords an equal
degree of protection. VIZIO Technical Support will provide instructions for
packing and shipping the covered Product to the VIZIO service center.
Limitations and Exclusions
VIZIO’s one-year limited warranty only covers defects in materials and
workmanship.This warranty does not cover, for example: cosmetic damage,
normal wear and tear, improper operation, improper voltage supply or
power surges, signal issues, damages from shipping, acts of God, any type
of customer misuse, modifications or adjustments, as well as installation
and set-up issues or any repairs attempted by anyone other than by a
36
D
Legal & Compliance
FCC Class B Radio Interference Statement
DHHS and FDA safety certification
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
This product is made and tested to meet safety standards of the FCC,
requirements and compliance with safety performance of the U.S.
Department of Health and Human Services, and also with FDA Radiation
Performance Standards 21 CFR Subchapter J.
IC Statement
Operation is subject to the following two conditions:
This device may not cause interference, and
This device must accept any interference, including interference that may
cause undesired operation of the device.
1. Reorient or relocate the receiving antenna.
This Class B digital apparatus complies with Canadian ICES-003.
2. Increase the separation between the equipment and receiver.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
3. Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
IC Radiation Exposure Statement
4. Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
Notice:
5. The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Copyrights
Because AACS (Advanced Access Content System) is approved as content
protection system for BD format, similar to use of CSS (Content Scramble
System) for DVD format, certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected contents. The operation of
this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be adopted and/or changed
by AACS after the production of this product. Furthermore, BD-ROM Mark
and BD+ are additionally used as content protection systems for BD
format, which imposes certain restrictions including playback restrictions
for BD-ROM Mark and/or BD+ protected contents. To obtain additional
information on AACS, BD-ROM Mark, BD+, or this product, please contact
an authorized Customer Service Center.
6. Shielded interface cables and AC power cord, if any, must be used in
order to comply with the emission limits.
7. The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.
RF Exposure Information
This device meets the government’s requirements for exposure to radio
waves. This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the
Federal Communications Commission of the U.S. Government. This device
complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
Many BD-ROM/DVD discs are encoded with copy protection. Because of
this, you should only connect your player directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture from copy-protected
discs.
37
D
Open Source Software Notice
This product incorporates copyright protection technology that is protected
by U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is prohibited.
Your VIA device may contain GPL executables and LGPL libraries that are
subject to the PL2.0/LGPL2.1 License Agreements. VIZIO offers to provide
source code to you on CD-ROM for a processing fee covering the cost
of performing such distribution, such as the cost of media, shipping and
handling upon request made to VIZIO at www.vizio.com.
Under the U.S. Copyright laws and Copyright laws of other countries,
unauthorized recording, use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may
subject you to civil and/or criminal liability.
This offer is valid for a period of three (3) years from the date of the distribution
of this VIA device by VIZIO. You can obtain a copy of the GPL, LGPL licenses
from http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and http://
www.gnu.org/licenses/oldlicenses/lgpl-2.1.html. You can also obtain a
copy of gSOAP public license from http://www.cs.fsu.edu/~engelen/
license.html. Please visit www.vizio.com for attribution of copyrights to any
open source software on your VIZIO VIA device. Permission is hereby granted,
free of charge, to any person obtaining a copy of any such software and
associated documentation files (the “Open Source Software”), to deal in
the Open Source Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense, and/
or sell copies of the Open Source Software, and to permit persons to whom
the Open Source Software is furnished to do so, subject to the following
conditions:
Licenses
• Java and all Java-based trademarks and logos are trademarks
or registered trademarks of Sun Microsystems, Inc. in the United
States and other countries.
•
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
•
Manufactured under license under U.S. Patent #’s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872;
7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide
patents issued & pending.
•
DTS is a registered trademark and the DTS logos, Symbol, DTS-HD
and DTS-HD Master Audio are trademarks of DTS, Inc. © 1996-2008
DTS, Inc. All Rights Reserved.
•
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI licensing LLC.
•
“DVD Logo” is a trademark of DVD Format/Logo Licensing
Corporation.
•
This product is licensed under the AVC patent portfolio
license and VC-1 patent portfolio license for the personal
and non-commercial use of a consumer to (i) encode video
in compliance with the AVC Standard and VC-1 Standard
(“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that
was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video
provider licensed to provide AVC/VC-1 Video. No license
is granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, LLC. See http://www.
mpegla.com.
•
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
ERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE
FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
CONTRACT,TORT OR OTHERWISE,ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OROTHER DEALINGS IN THE SOFTWARE.
VIZIO Internet Applications (VIA) Policy
VIZIO Internet Applications (“VIA”) affords the opportunity to access third
party Internet product offerings or services (“VIA Services”) on certain VIZIO
devices incorporating the VIA functionality. The VIA Services accessible
herein are provided as per our agreement with these third parties. These
agreements are subject to change, interruption, suspension (including
termination) at any time and for various reasons.VIZIO makes no warranties
or representations that any particular VIA Service will be accessible,
available, function in any particular manner or function at all.
Blu-ray Disc™, Blu-ray™, BD-Live™, BONUSVIEW™, and the logos
are trademarks of the Blu-ray Disc Association.
38
D
Internet Access Required for VIA Services and Updates
SOLE RISK. THIS MEANS, FOR EXAMPLE, THAT VIZIO DOES NOT GUARANTEE
THAT THE VIA SERVICES WILL ALWAYS WORK PROPERLY OR WORK AT ALL. THIS
ALSO MEANS WE DO NOT GUARANTEE THAT THE VIA SERVICES, CONTENT
OR PRODUCTS WILL BE FREE FROM VIRUSES, HACKS, OR OTHER POTENTIALLY
HARMFUL INTRUSIONS. PLEASE NOTE THAT SOME STATES DO NOT ALLOW SUCH
WARRANTY LIMITATIONS, SO THESE LIMITATIONS MAY NOT APPLY TO YOU.
To use these VIA Services, you must obtain high-speed/broadband access
to the Internet (such as DSL, cable or T1 lines), either directly or through
devices that access the Internet and pay any service fees associated
with such access. In addition, you must provide all equipment necessary
to make such connection to the Internet including a modem or other
Internet access device. Each individual third party Internet product may
require a different minimum Internet connection speed. The usability and
availably of a functional VIA device and its Internet connected feature
may highly be dependent and varied based on high-speed/broadband
Internet access, connection speed, bandwidth, other equipment(s), third
party applications, firmware updates and other factors outside of VIZIO’s
control and/or responsibility which may also be independent of the actual
operation of the device. It is further understood that VIA enabled devices
are integrated with sophisticated technologies (software and hardware)
which may exhibit delayed boot-up/shutdown time and/or interrupted
services. You further understand that the VIA Services specifications and
functionality are constantly evolving and that we may directly, or indirectly
via third parties, update or change the VIA Services, in whole or in part, at
any time and without notice to you. Such updates may be required for you
to use certain aspects of the VIA services or to continue to connect to the
VIA Services.
VIA Services Content Disclaimer
Certain VIA Services may include materials from third parties or links to
certain third party data servers. You acknowledge and agree that VIZIO is
not responsible for examining or evaluating the content or accuracy of any
VIA Services, their data servers or related third-party materials. VIZIO does
not warrant or endorse and does not assume and will not have any liability
or responsibility for any third-party materials or web sites, or for any other
materials, products, or services of third parties. Links to VIA Services and any
associated links to other data servers are provided solely as a convenience
to you. To the extent provided, content types or descriptions of VIA Services
are provided for convenience, and you acknowledge and agree that VIZIO
does not guarantee their accuracy.You understand that by using any of the
VIA Services, you may encounter content that may be deemed offensive,
indecent, or objectionable, which content may or may not be identified as
having explicit language. Nevertheless, you agree to use the VIA Services
at your sole risk and that VIZIO shall have no liability to you for content that
may be found to be offensive, indecent, or objectionable.
Availability of Content on VIA Services
VIZIO or said third parties providing VIA Services reserve the right to delete
data from their servers, or prevent access to their servers or to change
data categories, product offerings or service levels for any reason that
VIZIO or said third parties deem sufficient in their sole discretion at any
time, without notice. VIZIO may also impose additional or different limits
on the use of or access to certain VIA Services, in any case and without
notice or liability. Some or all of the data or functionality of VIA Services
may require additional payment and/or subscription by you. However, in
no event will you be charged for any VIA Services unless those charges are
made known to you in advance. VIZIO makes no warranties or representations of any kind as to the accuracy, currency, or completeness of any
information contained on the data servers of such third party providers of
any VIA Services. Furthermore, we do not review, control, or endorse the
content, products or services of VIA Services or their data servers.
You agree that you will not use any third-party materials in a manner that
would infringe or violate the rights of any other party, and that VIZIO is not
in any way responsible for any such use by you.
VIZIO Privacy Policy and VIA Software License Agreement
Your right to use the widget links to access VIA Services is also governed by
VIZIO’s Privacy Policy and the VIZIO Internet Applications Software License
Agreement (“VIA Software License Agreement”), the terms of which are
incorporated herein by this reference. The terms of both the Privacy Policy
and VIA Software License Agreement may be found in your Product Guide
and on VIZIO’s website. In the event of a conflict between the VIZIO Internet
Applications (VIA) Policy and the VIA Software License Agreement, the
VIA Software License Agreement shall control. BY YOUR USE OF THE VIA
SERVICES, YOU EXPRESSLY AGREE TO ALL THE TERMS AND CONDITIONS OF THE
FOREGOING POLICIES AND AGREEMENT.
VIA SERVICES ARE PROVIDED “AS IS” AND “AS AVAILABLE,” WITHOUT WARRANTY
OF ANY KIND (INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE), TO THE
MAXIMUM EXTENT PERMITTED BY LAW. USE OF THE VIA SERVICES IS AT YOUR
VIZIO may change the terms and conditions of this VIA Policy, the VIZIO
Privacy Policy and/or the VIA Software License Agreement, at any time
39
D
and without prior notice. The most up to date versions are available on the
Internet at: www.vizio.com. If you do not have Internet access, you should
periodically contact our customer service department and we will mail you
a current version, free of charge. IF YOU DO NOT AGREE TO ALL OF THE TERMS
AND CONDITIONS OF THE VIA POLICY, THE VIZIO PRIVACY POLICY AND/OR
THE VIA SOFTWARE LICENSE AGREEMENT OR ANY CHANGES THERETO, YOU
MUST IMMEDIATELY CEASE USE OF THE VIA SERVICES.
40
MODELS
// E3D320VX
// E3D420VX
// E3D470VX
© 2012 VIZIO INC. All rights reserved.
120406OC-NC
Download PDF