Audi Navigation System plus (RNS

Dear Audi Driver,
Overview of system
This quick reference guide can be used to easily find
information about operating the Navigation System and
the integrated multi-media functions. An example for
operating each of the functions is included. The menu
structure shows which options are available for each of
the functions.
The system enables you to quickly and easily operate the
electronic features of your vehicle from a central control
console. The following functions can be operated on
correspondingly equipped vehicles:
However, this quick reference guide is not meant to
replace the Operating Instructions, since there you can
find more detailed information and notes about operating
the system.
AUDI AG
p
RADIO
p
CD/TV (CD, MP3 and TV)
p
NAME (Directory)
p
TEL (Telephone)
p
NAV (Navigation)
p
INFO (Traffic information)
p
CAR (Hardware and software version information)
p
SETUP (System settings)
Audi
Navigation System
plus (RNS-E)
Quick reference guide
Switching system on and off
Switching on and off automatically
Function selector buttons
Selecting the
main functions
The system switches on automatically when the ignition is
switched on. The system also switches off automatically
when the ignition key is removed.
Control buttons
Switching on and off manually
If required, you can switch the system on manually by
briefly pressing the rotary pushbutton. To switch the
system off manually press and hold the rotary pushbutton. If the system has been switched off manually,
it will not switch on again automatically when the
ignition is switched on.
Volume adjustment
Activating the submenus
in the corners of the
display
Rotary pushbutton
Turn to select an option/
push to confirm
Turn the button
to adjust the
volume as desired.
RETURN button
Go back one level
Page 1
1 Switching system on and off · Overview of system · Operating the system
Operating the system
RADIO
RADIO
Example: How to store a new station.
menu structure
FW
MW
LM
1. Press the RADIO
Radio FM
Memory
Frequency
GALAXY
Information
D-RADIO
BAYERN 1
BAYERN 2
Culture
BAYERN 3
Pop
p
button.
Memory list
Memory
Classical
BAYERN 4
Tuning
function selector
Sound
TP TMC
p
p
p
Frequency
Radio FM
Memory
Frequency
Balance
Fader
Treble
Bass
DSP
Volume settings
Tuning
TP TMC
Sound
2. Turn the rotary pushRadio FM
Memory
Frequency
GALAXY
Information
D-RADIO
BAYERN 1
BAYERN 2
Culture
BAYERN 3
Pop
BAYERN 4
Classical
Tuning
button to mark the
p
p
p
p
p
p
desired station. Press
the pushbutton to
Sound
TP TMC
Tuning
confirm the selection.
Manual up
Manual down
Seek up
Seek down
Store station
Scan
3. Press the control
Radio FM
Memory
Frequency
button for ”Memory”.
Store station BAYERN 2
01: Bayern 1
02: 711 kHz
FM
MW
03: Bayern 3
FM
04: 207 kHz
LW
05: ---
Tuning
Sound
Balance
Fader
Treble
Bass
DSP
Volume settings
for other functions
(navigation information,
traffic announcements
and speech dialogue
system)
Sound
TP TMC
SETUP Radio - main menu
Press the SETUP button while in the RADIO function.
The following options are available:
4. Press the rotary pushRadio FM
Memory
01: Bayern 1
02: 711 kHz
Frequency
FM
button.
MW
03: Store BAYERN 2 here
04: 207 kHz
LW
05: Bayern 3
FM
06: ---
Tuning
Sound
TP TMC
p
p
p
p
p
p
p
p
Traffic programme
Regional stations
Station reception
Station display
Alternative frequency
PTY filter
Delete last stations
Delete stored stations
5. Turn the rotary push01: Bayern 1
02: 711 kHz
Frequency
FM
MW
04: 207 kHz
LW
05: Bayern 3
FM
TP TMC
Tip:
Press the pushbutton
06: ---
Tuning
button to select a
position for storing.
03: Store BAYERN 2 here
Sound
to confirm the position.
Press the arrow buttons
to switch to the
previous/next station.
1 RADIO
Radio FM
Memory
Page 2
CD/TV
CD/MP3/TV
Example: How to select an MP3 track.
menu structure
1. Press the CD/TV function
CD 1
Changer
Source
Track 01
selector button.
p
Teletext page selection
Teletext (TV)
Track 02
Track 03
00:08
p
p
p
p
p
p
p
Track 04
Track 05
Track 06
CD control
Sound
TP TMC
2. Press the control button for
MP3 Card1
Drive
Source
CD
”Source”.
TV
MP3 ctrl
Sound
TP TMC
Drive (MP3)
p
p
p
p
MP3
CD Navigation DVD
CD Audio
Memory card 1
Memory card 2
CD-ROM
Unreadable
Empty
Audio-CD
CD-ROM
Unreadable
Empty
CD
MP3
TV
Changer (CD)
Source (CD/MP3/TV)
MP3 Card1
Drive
Source
CD
MP3
TV
3. Turn the rotary pushbutton
MP3 Card1
Source
to mark MP3. Press the
selection.
MP3 ctrl
Sound
TP TMC
4. If applicable, press control
button ”Drive” to select
Card 1 or Card 2.
5. Turn the rotary pushbutton
Drive
MP3 Card1
Source
a night at the roxb
ABBA - Dancing ...
ABBA - Super Tro...
Abba Teens - Dancin
Abba Teens - Ma...
TP TMC
Sound
p
p
p
p
p
p
p
Forward
Rewind
Next
Previous
Shuffle
Scan
Name (Details) 1)
TV control
Press the pushbutton to
p
p
p
p
confirm the selection.
00:08
Sound
TP TMC
Sound (CD/MP3/TV)
CD/MP3 control
to mark the desired track.
ABBA - Waterloo....
MP3 ctrl
MP3 ctrl
pushbutton to confirm the
TV
Manual up
Manual down
Search up
Search down
Balance
Fader
Treble
Bass
DSP
Volume settings
for other functions
(navigation information,
traffic announcements
and speech dialogue
system)
p
p
p
p
p
p
SETUP CD/MP3/TV - main menu
Press the SETUP button while in the CD/MP3/TV function.
The following options are available:
CD system
p
Repeat CD
MP3 function
Tip:
Press the arrow buttons to
select the previous/next track
(CD/MP3 mode) or the previous/
next channel (TV mode).
p
p
p
p
1)
Page 3
Repeat
With subdirectories
Track display
Genre display
MP3 function.
TV
p
p
p
p
p
p
Screen
Videosource
TV Norm
AV Norm
Teletext settings
Default settings
5 NAME · TEL · Speech control system1
CD
MP3
1 CD/MP3/TV
Drive
NAME (Directory)
TEL (Telephone)
Example: How to add a new entry to the directory.
1. Press the NAME function selector
Directory
Find entry
Which telephone functions are
available depends on the equipment
installed in your vehicle. A corresponding message will appear in the
display when you press the TEL
function selector button.
button.
View list
New entry
Delete directory
TP TMC
2. Turn the rotary pushbutton to
Directory
Find entry
View list
mark the option ”New entry”.
Press the pushbutton to confirm
New entry
Speech control system
Delete directory
the selection.
The speech control function makes it easier to use the telephone while you
are driving.
TP TMC
- Press the talk button
e.
- After the beep, give e.g. one of the
commands listed in the table below.
Please refer to your Owner's Manual for
a complete list of possible commands.
3. Press the rotary pushbutton.
Directory
New entry
Salutation
2
1
First name
Middle name
Surname
Multi-function steering wheel
Title
TP TMC
1 CD/MP3/TV
5 NAME · TEL · Speech control system1
Volume adjustment
You can adjust the telephone volume by turning the thumbwheel
multi-function steering wheel.
4. Turn and press the rotary pushDirectory
Surname
AUD
r on the
button to select and confirm the
Commands
characters.
<Help>
Function
System announces and displays the commands which are
currently available.
TP TMC
<Enter PIN>
You can enter the PIN code for the SIM card.
<Dial number>
Specify the number you want to dial in a clear voice.
<Select name>
The number for an entry stored in the phone book will be
dialled.
<Redial>
The last telephone number will be dialled again.
<Store name>
Specify a name and telephone number for a new entry.
<Delete name>
You can delete an entry from the speech control phone
book.
<Play phone
book>
All entries stored in the speech control phone book will
be read out.
<Delete phone
book>
You can delete the entire speech control phone book.
5. Turn the pushbutton to OK and
Directory
Surname
press to confirm the entry.
AUDI SERVICE
6. All other fields can be filled out as
described.
TP TMC
Note: You must first enter a surname for the new entry in the directory. The
entries are stored automatically. If an entry in the directory is stored with an
address, you can load the address into the navigation by following the path
NavigationRMemoryRLoad from directory.
Page 4
Note: If your vehicle is equipped with the speech dialogue system please
refer to the Operating Instructions for further information.
Multi-function steering wheel
Loading media
The multi-function steering wheel enables fast and simple
control of selected functions of the system.
There is a DVD drive and two MP3 media slots located behind the display.
Press button e to open and close the display.
2
1
2
3
4
4
3
Button/
Operation
Thumbwheel
Function
Press thumbwheel once/
twice
To start/stop station search,
forwards
Press thumbwheel
To make, answer or end a call
Press and hold
thumbwheel
Fast forward (CD or MP3); to
reject an incoming call
1
Loading the navigation DVD
To select next station/track of
Scroll down with
current audio/video source;
thumbwheel
to scroll down in the phone book
To select previous station/track
of current audio/video source;
to scroll up in the phone book
Press button
To switch from audio/video mode
to telephone mode
Press button
Activating and deactivating the
speech control system/speech
dialogue system
Scroll up with
thumbwheel
To increase volume
Scroll down with
To reduce volume
thumbwheel
To repeat last voice guidance cue
5 Multi-function steering wheel
Press thumbwheel
Audi Navigationssystem plus (RNS-E) englisch 5.07
Ejecting the navigation DVD
5 Loading media · Map display · NAV · INFO · SETUP · System reset
Scroll up with
thumbwheel
Insert the navigation DVD into the slot r as
illustrated with the lettering facing upwards.
It will be drawn into the slot automatically.
You can also play audio CDs and MP3 CDs
using the DVD drive.
281.562.730.20
Page 5
Press button
u with the display opened.
Inserting an MP3 memory card
Insert the memory card into one of the slots t until it
engages. The side with the lettering must face upwards
and the missing corner must be at the front.
Removing an MP3 memory card
To release the memory card, briefly press the
card and then remove it from the slot.
© 2007 AUDI AG
AUDI AG reserves the right to alter any part of the vehicle, its equipment and technical specifications. No legal commitment can be implied by the information, illustrations or descriptions in
this publication. No part of this publication may be reprinted, reproduced or translated without
the written permission of AUDI AG. All rights under the laws of copyright are expressly reserved
by AUDI AG. Subject to alteration and amendment. Printed in Germany. Concept and layout:
Pfriemer GmbH.
Map display
NAV (Navigation)
Up to three alternative routes will be offered when you are using the route
without stopover mode.
Example: How to enter a destination and start the route guidance.
1. Press the NAV function
Turn the rotary pushbutton to mark
Navigation
Memory
the desired route. Press the push-
Country
Route
Germany
selector button.
Town/Zip
button to confirm the selection.
2. Turn the rotary pushbutton to
Street
Special destination
mark the option ”Town/ZIP”.
Start route guidance
Nav-Info
Map
TP TMC
Press the pushbutton to
confirm the selection.
When using the route with stopover mode the system will display an overview of the route showing the destination and up to 3 stopovers.
3. Turn and press the rotary
Navigation
Memory
K
Press the rotary pushbutton to
confirm the route suggestion.
L
J
I
H
G
F
E
D
C
B
MN
OP QR
S
U
V
W
X
Y
Z
Ä
Ö
Ü
S
A
DEL
Route
Town/Zip
INGOL
confirm the characters.
INGOLDINGEN
INGOLSTADT
4. When OK appears in the dis-
0..9
4
LIST
Nav-Info
pushbutton to select and
T
Map
TP TMC
play, press the rotary pushbutton to confirm the entry.
5. You can turn/press the rotary
pushbutton to select and
confirm a town displayed in
the list.
Symbol Information
Start position
6. Turn the rotary pushbutton to
Navigation
Memory
Destination and stopover location
Route
Town: INGOLSTADT
Centre (end entry)
Route with motorway section (incl. distance)
mark the option ”Street”.
Press the pushbutton to
Street
POI in town
confirm the selection. Repeat
Enter destination on map
Route with toll road (incl. distance)
Nav-Info
Map
TP TMC
Route with ferry connection
the procedure as described
above.
Route with car train
Season-restricted road section
Time-restricted road section
7. Turn the rotary pushbutton
Navigation
Memory
Distance to destination and estimated arrival time
(updated continually)
Route
Street: SCHLÜTERSTRASSE
End entry
to mark the option ”Centre
(end entry)”. Press the
Intersection
House number
pushbutton to confirm the
Enter destination on map
Map orientation
Nav-Info
Map
TP TMC
Map scale
You can select and activate/deactivate various settings for the map depiction.
Changing the map depiction:
Press the SETUP button. Turn the
8. Turn the rotary pushbutton
Navigation
Memory
Country
Germany
Town/Zip
INGOLSTADT
Street
SCHLÜTERSTRASSE
Special
rotary pushbutton and mark the
desired option. Press the pushbutton to confirm the selection.
Page 6
selection.
Route
route guidance”. Press the
AUDI ZENTRUM IN...
pushbutton to confirm the
destination
Start route guidance
Nav-Info
to mark the option ”Start
TP TMC
Map
selection.
NAV (Navigation)
INFO (Traffic information)
INFO (Traffic information)
menu structure
Example: How to call up TMC traffic reports.
menu structure
p
p
p
p
p
p
p
1. Press the INFO function
Last destinations
Top categories
Load from directory
Store in directory
Load route
Store route
Delete route
Info
TP memo
A7
Ulm
A9
München
A9
München
Source
Würzburg
p
selector button.
List of recorded
traffic reports
Preferred TMC station
Traffic jam, end of queue...
Route with/without
stopover
Route list
Route criteria
Avoid route from here
TP memo
Nürnberg
Traffic jam
Source
Nürnberg
Info
TP memo
Road works, traffic jam
TP TMC
A7
Ulm
A9
München
Source
Würzburg
Traffic jam, end of queue...
Nürnberg
Traffic jam
A9
München
Nürnberg
Road works, traffic jam
Memory
Route
Navigation
Memory
TP TMC
Route
2. Displaying detailed
Route with stopover
Info
TP memo
Route list
Route criteria
A7
Ulm
A9
München
Source
Würzburg
Traffic jam, end of queue...
Avoid route from here
Nürnberg
information for traffic
report: Turn the rotary
SETUP Info - main menu
pushbutton to mark
Press the SETUP button while in the INFO function.
The following options are
available:
Traffic jam
A9
Nav-Info
TP TMC
Nav-Info
p
p
p
p
p
p
Position data (incl.
street and/or town)
Longitude/latitude
coordinates of current
position
Satellites received
Destination and
stopover data
Estimated time of
arrival
Distance
München
Map
Road works, traffic jam
Zoom
Map legend menu
report. Press the pushp
p
button to confirm the
selection.
3. Displaying additional
Info
TP memo
1/14
Press the SETUP button while in the navigation function.
The following options are available:
p
p
p
p
p
p
p
p
p
p
Source
Bayern 3 15:49
a blind spot.
traffic reports: Turn the
rotary pushbutton to
Accident, left lane is
blocked.
mark the option ”Show
Show next TMC message
Show on map
next TMC message”.
TP TMC
Press the pushbutton
to confirm the selection.
4. Displaying on map:
Info
TP memo
1/14
Map colours (day/night)
Orientation
Map type
Voice guidance
(navigation directions)
Map contents
Delete last destinations
Turn list
Motorway info
Intersection map
Automatic intersection zoom
Compass
Version information
Demo mode
Set position/direction
the desired traffic
TP TMC
Map
SETUP Navigation - main menu
p
p
p
p
Nürnberg
Source
Bayern 3 15:49
a blind spot.
Turn the rotary
pushbutton to mark
Accident, left lane is
blocked.
the option ”Show on
Show next TMC message
Show on map
map”. Press the
TP TMC
pushbutton to confirm
the selection.
Page 7
p
p
TP memo timer
TMC announcement
SETUP (System settings)
SETUP (System settings)
Example: How to set a different menu language.
menu structure
You can only change this setting when the vehicle is stationary.
Menu language
Distance unit (can be
selected when language
is set to English)
Time setting
Default settings
Speech dialogue system
Delete user data
1. Press the SETUP
Setup Radio
Traffic programme
Settings
off
Regional stations
on
Sensitivity
local
Station display
variable
Alt. frequency
on
button while in
any of the main
PTY filter
Display
function selector
TP TMC
Sound
Setup
Settings
functions.
Settings
2. Press the
Menu language
Distance unit
km
Setup
control button
Menu language
Distance unit
for ”Settings”.
Time setting
Default settings
Delete user data
Delete user data
Sound
TP TMC
Display
Display
p
p
Switch off display
Brightness
3. Press the rotary
Setup
Settings
Menu language
Distance unit
pushbutton.
km
Time setting
Default settings
Delete user data
Display
km
Time setting
Default settings
Display
Settings
TP TMC
Sound
Setup
Settings
4. Turn the rotary
Language
Deutsch
TP TMC
Sound
Sound
Balance
Fader
Treble
Bass
DSP
Volume settings
for other functions
(navigation information,
traffic announcements
and speech dialogue
system)
pushbutton to
mark the desired
English
Français
language. Press
Italiano
Espanol
Display
TP TMC
Sound
the pushbutton
to confirm the
selection.
System reset
Should the navigation system no longer respond to the
controls, you must carry out a system reset (reboot).
Switch off the navigation system using the ON/OFF
button. Then press and hold the ON/OFF button until
the start screen disappears again in the display.
After a few seconds the system will reboot itself.
Once this process is completed
the navigation system
will be ready for
use again.
Page 8
p
p
p
p
p
p
Download PDF