CMS801 sub - ON OFF Service Srl

CMS801 sub
Product Description
The Tannoy CMS801 subwoofer is a compact unit is specifically designed to complement
the full range CMS ceiling monitor systems; delivering low frequency extension into
applications that require a combination of premium sonic quality and output level for music
and speech reinforcement.
The 200mm (8.00") driver, with long throw multi fibre paper pulp cone, and a 2nd order
160Hz passive crossover are mounted in a vented, injection moulded, paintable front baffle
manufactured from UV/weather resistant UL94V-0 ABS material.
Two CMS801 subwoofer model versions and a separate back can are available to satisfy
the vast majority of installation application requirements:
CMS801 sub BM (Blind Mount) - supplied with an integral back can.
CMS801 sub PI (Pre-Install) - supplied without a back can.
CMS801 PI Back Can (Pre-Install back can) - use with the CMS801 sub PI.
The CMS801 sub BM model is equipped with a low insertion loss 60W line transformer
mounted within the back can. This is easily configurable to the following settings via front
baffle mounted rotary tapping switch:
70V systems: 60W / 30W / 15W / 7.5W / OFF & low Impedance operation
100V systems: 60W / 30W / 15W / OFF & low Impedance operation
The CMS801 sub PI is supplied without a transformer. If the product is to be used without a
back can a 60W line transformer (7600 1658) is available as an optional accessory for easy
connection to the baffle mounted control switch circuit. Installing the transformer in this
manner (flying) requires installation in accordance with local building regulations.
NOTE: For optimum performance and full compliance with safety ratings Tannoy
recommends using the CMS801 PI back can (8001 4570) accessory option in which the
transformer is pre-fitted.
•
•
•
•
•
•
Features
High Power & high sensitivity with low distortion
UV/weather resistant UL94V-0 ABS front baffle
Blind Mount & Pre Install options
Easily accessible tapping switch on front baffle
Low insertion loss 60W line transformer
Packaged with tile rails and C-ring for quick &
easy installation and simple stocking logistics
• Five year warranty
•
•
•
•
•
•
•
•
•
•
Applications
Multizone foreground music and paging systems
Boardrooms and offices
Business music systems
Airports, convention centres, hotels
Reception and waiting rooms
Houses of worship
Retail outlets and shopping malls
Lounges and bars
Cruise ships
Courtrooms
The zinc plated steel back cans have an integrated, recessed termination box. The
removable locking connector has screw terminals for secure wire termination and "loop
through" facility. Strain relief is provided by a clamping mechanism for use with plenum
rated cable or conduit.
Spring loaded self-aligning clamps make for quick and easy installation, while all models
are also supplied with two tile support rails and one C-ring included in the package.
A plaster (mud) ring is available as an optional accessory.
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: info@tannoy.com
E: ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
CMS801 BM / PI sub data file // issue 1.06 // 14.01.08
CMS801 sub
TECHNICAL SPECIFICATIONS
System
Frequency response (-3dB)
(1)
Frequency range (-10dB) (1)
CMS801 sub
Transducer
58Hz - 160Hz
42Hz - 300Hz
System sensitivity (1W @1m) (2) 92dB (1W = 2.45V for 8 Ohms)
Crossover
Integral 2nd order passive,
160 Hz
Rated maximum SPL (2)
Average
Peak
Average with THP60
Power handling (3)
Average
Programme
Peak
112dB
118dB
110dB
Distortion
10% Full Power (7.75V)
70Hz
100Hz
1% Full Power (2.45V)
70Hz
100Hz
Security toggle clamp
Complete with fixed back can
Separate back can for Pre Installation
Cable clamp & squeeze connector for
conduit up to 22mm
3 Sets of horizontal positions
19 / 22 / 28mm (0.75 / 0.87 / 1.1")
Connectors
Safety agency ratings (pending)
2nd Harmonic
1.22%
0.38%
Dimensions
Bezel diameter
2nd Harmonic
0.91%
0.04%
3rd Harmonic
1.90%
0.49%
3rd Harmonic
1.28%
0.44%
Ordering information
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Safety ring located at rear of enclosure
for load bearing safety bond
60W / 30W / 15W / 7.5W / OFF
& Low Impedance operation
60W / 30W / 15W / OFF
& Low Impedance operation
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
8001 4730
8001 4740
8001 4650
8001 4570
7600 1658
Safety features
Conduit knockouts
Notes
(1)
Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber
(2)
Unweighted pink noise input, measured in an IEC baffle in an Anechoic Chamber.
If the loudspeaker is placed in the ceiling near a corner ( /2) an increase of 6dB
in sensitivity and maximum SPL can be realised.
(3)
Long term power handling capacity as defined in EIA - 426B test
A full range of measurements, performance data, and Ease™ Data can be
downloaded from www.tannoy.com
Part number
Zinc plated steel
Reflex loaded UL 94V-0 rated ABS
Steel, with weather resistant coating
Cable entry options
8 Ohms
100V
Enclosure
Back can
Baffle
Grille
Back can options
Blind Mount (BM)
Pre Install (PI)
Recommended amplifier power 200W @ 8 Ohms
Transformer taps
(via front rotary switch)
70V
Physical
Clamping design
100W
200W
400W
Nominal Impedance
1x 200mm (8.00") long throw woofer with
multi fibre paper pulp cone
Model name
CMS801 sub BM
CMS801 sub PI
Plaster Ring - CMS801
Back can CMS801 PI 8 Ohm
CMS 60 Watt XFMR/Lead Dual 8 Ohm
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
BM Hole cutout diameter
PI Hole cutout diameter
Optional accessories
Baffle / Grille
Colour
White
White
N/A
N/A
N/A
295mm (11.61")
327.8mm (12.90")
Front of accessory back can
bezel to top of safety loop (PI)
Included accessories
295mm (11.61")
310.5mm (12.22")
Front of ceiling to
top of safety loop (BM)
Net weight (ea)
CMS801 sub BM
CMS801 sub PI
PI Back can
UL-1480, UL-2043, CE
325mm (12.80")
Front of ceiling to
rear of back can (BM)
Front of ceiling to rear
of speaker unit (PI)
Removable locking connector with screw
terminals with "loop through" facility
117.50mm (4.63")
168.5mm (6.63")
6.3kg (13.89lbs)
3.2kg (7.05lbs)
4kg (8.81lbs)
C Ring, tile bridge, paint mask,
cutout template, grille
Plaster (Mud) Ring
Packed Quantity
2
2
10
1
10
Packed Weight
kg (lbs)
19.0 (41.89)
11.5 (25.35)
8.0 (17.64)
4.5 (9.92)
12.0 (26.46)
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: info@tannoy.com
E: ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
CMS801 BM / PI sub data file // issue 1.06 // 14.01.08
CMS801 sub
PERFORMANCE MEASUREMENTS
1m on-axis frequency response
100
SPL, 1W/1m (dB)
90
80
70
60
ANECHOIC
FREQUENCY
RESPONSE
50
100
10
frequency (Hz)
1000
10000
1m on-axis frequency response
50
p
Impedance (ohms)
40
30
20
10
0
1
10
IMPEDANCE
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
frequency (Hz)
100
1000
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: info@tannoy.com
E: ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
CMS801 BM / PI sub data file // issue 1.06 // 14.01.08
CMS801 sub
The PI back can ac
accepts di
direct
connect
nnectiion to inst
instaalled conduit in two
queeze co
connector
nnectorss:
wa
wayys u
ussing squeeze
1 22m
22mm
m (0.
0.8
87” ) via
ia the cla
lam
mp lo
loccati
atio
on at
the rear after fi
firrst rre
emovin
ving
g cable cla
clam
mp
2 Any of the three knock-ou
he
ock-outt p
po
oin
intts at the
side 19
19m
mm / 22mm / 28mm
(0.75” / 0.87” / 1.10”)
CMS801 PI BAC
BACK CAN
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
TEMPLA
TEMPL
ATE
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: info@tannoy.com
E: ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
CMS801 BM / PI sub data file // issue 1.06 // 14.01.08
s v
CMS801 sub
DIMENSIONAL SKETCHES
CMS801 BM sub
327.8mm
3 27.
[12.9
(12.90”)
310.5
310.5mm
[12.22"]
(12.22”)
18.5
18.5mm
[0.73"]
(0.73”)
325.0mm
325.0
[12.80"]
(12.80”)
286.4
286.4mm
[11.27"]
(11.27”)
TEMPLATE HOLE
CUTOUT SIZE
295MM (11.61”)
CMS801 PI sub
117.5mm
117.5
[4.63"]
(4.63”)
18.5
18.5mm
[0.73"]
(0.73”)
325.0
325.0mm
[12.80"]
(12.80”)
286.4
286.4mm
[11.27"]
(11.27”)
C
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: info@tannoy.com
E: ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
TEMPLATE HOLE
CUTOUT SIZE
295MM (11.61”)
CMS801 sub
Architectural specifications
The Ceiling Subwoofer System shall consist of a 200mm (8.00") transducer, with long throw multi fibre paper pulp cone, and a 2nd order 160Hz passive
crossover mounted in a vented, injection moulded, paintable front baffle in UL94V-0 ABS material.
The back can in both PI (pre-install) & BM (Blind-mount) variants shall be constructed of zinc plated steel. A recessed termination box shall be integrated with
the back can, a removable locking connector with screw terminals for secure wire termination with "loop through" facility shall be provided. Strain relief will be
provided by a clamping mechanism for use with plenum rated cable or conduit.
For pre-wiring the PI (pre-install) back can is provided with conduit knockouts (19mm/22mm/28mm, 0.75"/0.87"/1.14"). A safety ring is located on the rear of
the back can for a load bearing safety bond.
Performance of the Ceiling Subwoofer System shall meet or exceed the following criteria: Frequency range measured on axis shall be 42Hz - 300Hz (-10dB
from rated sensitivity, measured in an IEC baffle in an anechoic chamber with no equalization). Sensitivity shall be 92dB (1W @ 1m where 1W = 2.45V for 6
Ohms). Long term power handling capacity as defined in EIA-426B test shall be 100W, recommended amplifier power 200W. The nominal system
impedance shall be 6 Ohms (in low impedance setting).
The Ceiling Subwoofer System shall be equipped with a 60W high performance line transformer for use in 70.7 or 100 Volt distributed audio systems with 60,
30, 15, 7.5* Watt taps available. An easily accessible rotary switch located on the front baffle shall be available for selecting transformer and low impedance
settings. A weather resistant perforated steel grille covers the transducer and switch.
Two support rails and one C-Ring shall be included with the ceiling monitor system.
Bezel diameter 325mm (12.80")
Front of ceiling to rear of back can 310.5mm (12.22"), Front of ceiling to top of safety loop 327.8mm (12.90")
Front of ceiling to rear of speaker unit 117.50mm (4.63"), Front of accessory back can bezel to top of safety loop 168.5mm (6.63")
The Ceiling Subwoofer System shall be the.....CMS801 sub.
*70 Volt only
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: info@tannoy.com
E: ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
CMS801 BM / PI sub data file // issue 1.06 // 14.01.08
CMS801 sub
NOTES
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: info@tannoy.com
E: ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
CMS801 BM / PI sub data file // issue 1.06 // 14.01.08
CMS801 sub
NOTES
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: info@tannoy.com
E: ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
CMS801 BM / PI sub data file // issue 1.06 // 14.01.08