4050 Series LCD Touch Screen Monitor
Large Format Interactive LCD
Display Werks Part #4050-TU-400FP2-2S, Based on the Samsung 400FP-2 and
Display Werks Part #4050-TU-400FPN2-2S, Based on the Samsung 400FPn-2
40” LCD Touch Screen.
 Professionally Integrated SAW (Surface Acoustic Wave)
Touch Screen.
 Built In Speakers.
 Built in fans for extended run times.
 1920 x 1080 High Resolution.
 Low Power Consumption.
 USA Service and Technical Support.
 Touch Screen Integrated within Factory Enclosure.
 3 Year Warranty (Monitor).
 3 Year Warranty (Touch Screen and Controller).

Also Available in the following Samsung Monitors:
Additional Models Coming Soon
LCD Monitor Model: Samsung 400FP-2, 400FPn-2
For additional “N” Version information please see Samsung Specifications
LCD Element: 40” LCD
Max. Resolution: (pixels) 1920 x 1080
Pixel pitch: 0.461mm (H) x 0.461 (V)
Color Space: 72%
Display Response Time: 8 ms
Viewing Angle: 178° right/left/up/down
Contrast Ratio: 4000:1 (40,000:1 DC)
Display Werks is a Samsung authorized integrator.
Brightness: 450 cd/m²
Power Requirements: AC 100-240V (+/-10%) 50/60 Hz
Power Consumption: 220W / Standby 1W
Operating Temperature: 10°C to 40°C
Operating Humidity: 10% to 80% (no condensation)
Built in Fan: Yes
Dimensions: inch (mm) Approx. 38.2 x 22.9 x 4.95 (970.3 x 581.6 x 125.7) with
Touch Screen integrated.
Weight lbs.: (kg) Approx. 56.5 lbs (25.6) with integrated Touch Screen installed.
Speakers: Built in standard (10 W x 2)
Input Terminals
Output Terminals
DVI
24 pin
RS232C
Mini D-sub 15 pin
RGB
Mini D Sub 15Pin x 1
Audio
Audio line out (RCA L/R)
CVBS
1/8” Jack
DC out
5V / 1.5 Amp
HDMI
HDMI connector
Serial RS232C
Mini D Sub 15Pin x 1
Audio AV
Line In for AV (RCA L/R)
Audio PC
Line In for PC (3.5 mm mini Jack)
Quality and Innovation
in LCD Integration.
TM
Sam 4050 FP-2 Rev 0 SAW
4050 Series LCD Touch Screen Monitor
Large Format Interactive LCD
Display Werks Part #4050-TU-400FP2-2S, Based on the Samsung 400FP-2 and
Display Werks Part #4050-TU-400FPN2-2S, Based on the Samsung 400FPn-2
400FP-2, 400FPn-2 Samsung Dimensional Drawing
Surface Acoustic Touch Screen Specifications:

Total additional weight to monitor: 14.5 lbs.

Construction: Glass panel with transducers attached to the front surface of the glass substrate.

Positional Accuracy: Standard deviation of error is less that 0.080 in (2.03 mm) Equates to less than 1% error on most displays.

Light Transmission: Up to 92%.

Operating Temperature: -20°C to 50°C

Touch Active Force: Less then 3 ounces

Operational Altitude: 10,000 ft Above Sea Level

Expected Life Performance: No known wear-out mechanism, as there are no layers, coating, or moving parts. This SAW technology
has been operationally tested to more than 50 million touches in one location without failure, using a stylus similar to a finger.

Total Additional Depth to Samsung 400FP-2, 400FPn-2: 1/4”
Touch screen Connector Specifications:

USB 2.0

Maximum Single Cable Length: 5m (16.4 ft)
Note: Distances over 5M can be achieved by using a USB extension system.
Note: Power for the LCD monitor itself requires a connection to a 110 VAC receptacle. In addition the 3250, 4050 and 4650 series
SAW touch screen monitors require an external power supply to drive the integrated touch screen controller. This small form factor 110
VAC to dc power supply is included with every 3250, 4050 and 4650 series SAW touch screen monitor.
Sam 4050 FP-2 Rev 0 SAW
Download PDF