INTENSIFIER 3 SERIES CAMERA
TECHNICAL SPECIFICATIONS
SECURITY SYSTEM DIVISION
LEVEL 1___ 28 00 00 ELECTRONIC SAFETY AND SECURITY
LEVEL 2___28 20 00 ELECTRONIC SURVEILLANCE
LEVEL 3___28 23 00 VIDEO SURVEILLANCE
PART 2 – PRODUCTS
2.01 GENERAL
A. All equipment and materials used shall be standard components that are regularly manufactured and
used in the manufacturer’s system.
B. All systems and components shall have been thoroughly tested and proven in actual use.
C. All systems and components shall be provided with the availability of a toll-free technical support
phone number from the manufacturer. The phone number shall allow for technical assistance for either
the dealer/installer or the end user at no charge.
D. All systems and components shall be provided with an explicit manufacturer warranty.
2.02 GENERAL SPECIFICATIONS
Speco Technologies INTENSIFIER 3 SERIES CAMERA or approved equal.
The DSP Color CCTV camera shall consist of a 1/3-inch format Sony Super-HAD II CCD imaging chip
650TV lines.
The DSP Color CCTV camera shall meet or exceed the following design and performance specifications:
2.03 CAMERA SPECIFICATIONS
Image Sensor
Full Resolution
Min. Illumination (50IRE)
S/N Ratio
White Balance
Lens
Day & Night
1/3-inch Sony Super-HAD II CCD
768 x 494 pixels (UXGA)
0.15 Lux (CDS On – 0.00002 Lux)
52db
AWB(=1700°K~11,000°K)
2.6-12mm DC auto iris varifocal lens
9-22 mm DC auto iris varifocal lens
5-50mm DC auto iris varifocal lens
Supported (Color / BW / Auto)
2.04 VIDEO SPECIFICATIONS
Resolution
Digital Zoom
Motion Detection
Intensifier 3
650TV lines
x1 - x16
8 zones
x2 - x512
2.05 EXTERNAL TERMINAL SPECIFICATIONS
Analog Output
1 channel 650TV Lines
2.06 SYSTEM INTEGRATION SPECIFICATIONS
A. Standard PoE(IEEE802.3af) Supported
B. Intelligent Video
Motion Detection
C. Fan/Heater
Fan/Heater interface with embedded control algorithm using a
thermometer for outdoor vandal products.
(HTINTB8, HTINTB9, HTINTB10, HTINTD8, HTINTD9, HTINTD10)
2.07 OPERATING ENVIRONMENT
A.
B.
C.
D.
Operating Temperature
Operating Humidity
Power
Dimensions(W x H)
E.
F.
G.
H.
Weight
Housing
Approvals
Package information
-4°F - 140°F
8 - 95% RH
12VDC, 400mA / 24VAC 170mA
5.1” W x 3.64” H (HT7246IHR, HT7247IHR, HT7250IHR)
3.6” W x 4.01” H (HTINTB8, HTINTB9, HTINTB10)
5.47” W x 4.36” H (HTINTD8, HTINTD9, HTINTD10)
3 lbs.
AL
FCC, CE, MIC, RoHS
Camera, Manual, L wrench, Screws, Video Test Connector,
Power jack.
2.08 WARRANTY
5 Years, Parts and Labor
2.09 SPECO TECHNOLOGIES PART NUMBER
A. HT7246IHR, HT7247IHR, HT7250IHR
B. HTINTB8, HTINTB9, HTINTB10
C. HTINTD8, HTINTD9, HTINTD10
Speco Technologies is constantly developing product improvements. We reserve the right to modify
product design and specifications without notice and without incurring any obligation. Rev. 03/13/13
Download PDF