Commercial Dishwashing & Kitchen Equipment
– SINCE 1880 –
2007
PRICE GUIDE
40A
Effective Date January 1, 2007
MAIN OFFICES AND FACTORY
1844 So. Laramie Ave.
Chicago, IL 60804
(708) 656-0660
FAX (708) 656-0017 & (708) 656-0199
e-mail: blakeslee@blakesleeinc. com
www.blakesleeinc.com
Better
by design . . . proudly made in U.S.A.!
There are approximately 350 Blakeslee Dishwasher models available, but only the basic models with
less than four tanks are shown. For larger dishwashers or for dishwashers with a variety of options, as
well as circular type dishwasher models, information will be supplied on request.
Dishwasher type designations:
“UC” - Undercounter dishwasher
“D” - Door type, stationary rack-type dishwasher
“R” - Rack conveyor-type, straight model
“RA” - Rack conveyor-type, circular model (Rack-A-Round)
“F” - Flight conveyor-type, straight model (Standard Width)
“FA” - Flight conveyor-type, circular model (Flight-A-Round)
“XF” - Flight conveyor-type, straight model (Extra Wide)
“LT” - Low temp - Chemical sanitizing
“LC” - Low water consumption (multi-tank Rack conveyor-type and Flight conveyor-type
Models are assembled in any combination by using one or more of five basic tanks-(Std. or Extra Wide).
P=24 in. long; C=32 in. long (for rack conveyor-type only); E=36 in. long; L=40 in. long; M=50 in. long.
Dishwashers may be selected with one of the following sanitizing systems:
Conventional sanitizing type, 180°F minimum final rinse temperature, standard size
booster heater required.
Medium temperature type, 150-160°F final rinse temperature, small booster and also
chlorine dispenser required.
Low temperature type, minimum 120°F final rinse temperature, chlorine dispenser
required. No booster required unless basic hot water supply temperature is under 120°F.
All heating systems are controlled with adjustable electric thermostat and protected with
automatic liquid level control system. Steam coils used for the tank heat are stainless steel.
IMPORTANT INFORMATION
When ordering, please give the following information:
DISHWASHERS
KITCHEN MACHINES
Model Number
Model Number
Type of tank heat
Voltage, cycle and phase
Voltage, cycle and phase
Optional equipment desired
Direction of operation
Optional equipment desired
• All prices are f.o.b. factory unless otherwise stated.
• Standard terms are net 30 days from date of invoice.
• All prices and specifications subject to change without notice.
• All orders are subject to approval and acceptance by the factory.
• Prices do not include federal, state, municipal or other taxes
• Return of merchandise must be authorized and will be subject to a restocking charge.
WARRANTY
Blakeslee standard warranty is one year from date of installation, not to exceed eighteen months
from shipment date. This includes labor and parts expenses. Full warranty on chemical dispensing
equipment is three months; additional nine months parts only.
2
UNDERCOUNTER DISHWASHER
Heat Sanitizing:
UC-21-A without Built-in Booster
with TOP and SIDE Panels .................. $4500.00
UC-21-B with Built-in Booster
with TOP and SIDE Panels .................. $4700.00
UC-21T-B 6” Taller than Std.
and with Built-in Booster
with TOP and SIDE Panels .................. $4950.00
UC-21XT-B 12” Taller than Std.
and with Built-in Booster
with TOP and SIDE Panels .................. $5250.00
Chemical Sanitizing:
UC-21-C with Chlorine Dispenser
and 1.5 k.w. Tank Heat
with TOP and SIDE Panels .................. $4650.00
If stainless steel back panel is
desired, please add ............. $250.00
If pumped drain is desired,
please add ........................... $250.00
If wiring for 3 Phase is desired,
please add ........................... $100.00
Any model without panels
............................................ deduct $100.00 (list)
GLASSWASHER
MODEL G-2000-F
3 K.W. electric heating element.
Non-abrasive conveyor.
Three separate pumps for detergent,
sanitizer, and rinse aid.
$6025.00
160 lbs.
220/60/1
3
RACK CONVEYOR-TYPE
DISHWASHERS
DOOR-TYPE
SINGLE TANK
SINGLE TANK
WITH PRE-WASH
Better . . .
By design
MODEL
SINGLE
D-8*
DOUBLE
D-8
SINGLE
D-9
R-L-40
R-M-50
R-PL-64
R-PM-74
BASE PRICE
$7,350
$11,450
$5,000
$11,900
$12,300
$16,700
$17,150
ELECTRIC HEAT
350
700
425
425
425
425
STEAM INJECTOR
275
550
445
445
445
445
STEAM COIL (S.S.)
800
1,600
975
975
975
975
GAS HEAT
500
1,000
700
700
700
700
700
850
900
900
900
900
STD
STD
STD
STD
300
300
250
250
300
300
400
400
400
400
75
75
OPTIONAL
CHEMICAL SANITIZER (LT)
AUTOMATIC FILL
N/C
N/C
AUTO LIQUID LEVEL CONTROL
N/C
N/C
COMMON DRAIN CONNECTION
STD
250
**COMMON ELECTRICAL (ELEC. HEAT)
COMMON STEAM CONNECTION
COMMON WATER CONNECTION
CORNER FILLER PANEL
260
260
ENERGY SAVING CONTROLS
EXTRA RACKS (EACH)
75
75
75
LOWER SPRAY ASSEMBLY (P-TANK)
75
75
200
200
PRESSURE GAUGE
160
160
160
160
160
160
160
STAINLESS STEEL FRAME
STD
STD
STD
STD
STD
STD
STD
STEAM PRESSURE REDUCING VALVE
550
550
550
550
550
550
550
200
200
200
200
500
500
500
500
TANK EXTENSION (2” OR 4”)
TWO-SECTION DOOR (PER TANK)
VENT HOODS (EACH)
WATER PRESSURE REDUCING VALVE
300
300
300
SIDE LOADER
UNLOADER
SHIPPING WEIGHT (APPROX. POUNDS)
550
1100
300
300
300
300
300
3,850
3,850
3,850
3,850
4,850
4,850
4,850
4,850
760
800
1050
1090
*Model D-8T 10” Taller than Standard - Base price ...... $8500.00
**Under 440V and without overload protection.
Single Tank operation switch on Double D-8 .................. $340.00
Optional final rinse boosters shown on page 8.
Basic price of D-8, D-8T, and Double D-8 includes stainless steel wash pump. These are the first and
only door type dishwashers in the industry with stainless steel pump.
NOTE:
Standard Features
DOOR TYPE
DISHWASHERS
4
All stainless steel pump (D-8, D-8T & Double D-8)
Door safety switch
Stainless steel frame
Stainless steel legs and feet
Stainless steel front panels
120-volt control circuit
Thermal overload protection for each motor
Racks (D-8, D-8T & Double D-8)
RACK CONVEYOR-TYPE
DISHWASHERS
TWO TANK
Better . . .
By design
MODEL
R-CC-64
R-EE-72
R-LE-76
R-LL-80
R-ML-90
R-MM-100
BASE PRICE
$20,450
$20,750
$20,900
$21,100
$21,650
$22,150
ELECTRIC HEAT
850
850
850
850
850
850
STEAM INJECTOR
890
890
890
890
890
890
STEAM COIL (S.S.)
1,950
1,950
1,950
1,950
1,950
1,950
GAS HEAT
1,400
1,400
1,400
1,400
1,400
1,400
CHEMICAL SANITIZER (LT)
900
900
900
900
900
900
COMMON DRAIN CONNECTION
300
300
300
300
300
300
**COMMON ELECTRICAL (ELEC. HEAT)
300
300
300
300
300
300
COMMON STEAM CONNECTION
200
200
200
200
200
200
COMMON WATER CONNECTION
300
300
300
300
300
300
ENERGY SAVING CONTROLS
400
400
400
400
400
400
EXTRA RACKS (EACH)
75
75
75
75
75
75
PRESSURE GAUGE
160
160
160
160
160
160
STEAM PRESSURE REDUCING VALVE
550
550
550
550
550
550
TANK EXTENSION (2” OR 4” )
200
200
200
200
200
200
VENT HOODS (EACH)
500
500
500
500
500
500
WATER PRESSURE REDUCING VALVE
300
300
300
300
300
300
SIDE LOADER
3,850
3,850
3,850
3,850
3,850
3,850
UNLOADER
4,850
4,850
4,850
4,850
4,850
4,850
SHIPPING WEIGHT (APPROX. POUNDS)
1050
1090
1370
1380
1420
1480
OPTIONAL
TWO-SECTION DOOR (PER TANK)
Standard Features
RACK CONVEYOR-TYPE
DISHWASHERS
Integrated Recirculating System Design
Automatic fill
Door safety switch
Stainless steel frame, legs and feet
Stainless steel front panels
Final rinse economizer
120-volt control circuit
Thermal overload protection for each motor
Common electric connection for gas and steam-heated models
Protective heat chamber
Racks
5
DISHWASHERS
THREE
TANK
TWO TANK WITH PRE-WASH
Better . . .
By design
MODEL
R-PCC-88
R-PEE-96
R-PLL-104
R-PMM-124
R-LLL-120
BASE PRICE
$25,000
$25,550
$25,750
$26,550
$29,600
ELECTRIC HEAT
850
850
850
850
850
STEAM INJECTOR
890
890
890
890
890
STEAM COIL (S.S.)
1,950
1,950
1,950
1,950
1,950
GAS HEAT
1,400
1,400
1,400
1,400
1,400
900
900
900
900
900
OPTIONAL
CHEMICAL SANITIZER (LT)
COMMON DRAIN CONNECTION
450
450
450
450
450
** COMMON ELECTRICAL (ELEC. HEAT)
450
450
450
450
450
COMMON STEAM CONNECTION
200
200
200
200
200
COMMON WATER CONNECTION
300
300
300
300
300
ENERGY SAVING CONTROLS
400
400
400
400
400
EXTRA RACKS (EACH)
75
75
75
75
75
LOWER SPRAY ASSEMBLY (P-TANK)
200
200
200
200
200
PRESSURE GAUGE
160
160
160
160
160
STEAM PRESSURE REDUCING VALVE
550
550
550
550
550
TANK EXTENSION (2” OR 4” )
200
200
200
200
200
500
500
500
500
500
TWO-SECTION DOOR (PER TANK)
VENT HOODS (EACH)
WATER PRESSURE REDUCING VALVE
300
300
300
300
300
SIDE LOADER
3,850
3,850
3,850
3,850
3,850
UNLOADER
4,850
4,850
4,850
4,850
4,850
SHIPPING WEIGHT (APPROX. POUNDS)
1380
1420
1660
2060
2140
*NOTE:
For information and pricing on “LC” - low water consumption Rack conveyor-type dishwashers, consult factory.
Standard Features
RACK CONVEYOR-TYPE
DISHWASHERS
6
Integrated Recirculating System Design
Automatic fill
Door safety switch
Stainless steel legs and feet
Stainless steel frame, front panels
Final rinse economizer
120-volt control circuit
Thermal overload protection for each motor
Common electric connection for gas and steam-heated models
Protective heat chamber
Racks
FLIGHT CONVEYOR-TYPE
SINGLE TANK
TWO TANK
SINGLE TANK WITH PRE-WASH
THREE TANK
TWO TANK WITH PRE-WASH
“F” FLIGHT - TYPE - STANDARD WIDTH (20” BELT) *
“XF” FLIGHT - TYPE - EXTRA WIDE (30” BELT) *
TANK HEAT: ELECTRIC, GAS, STEAM INJECTOR, OR STEAM COIL
STANDARD FEATURES:
INTREGRATED RECIRCULATING SYSTEM DESIGN
STAINLESS STEEL FRAME, LEGS, AND ADJUSTABLE FEET
STAINLESS STEEL FRONT AND END PANELS
FINAL RINSE ECONOMIZER
VENT HOODS FOR EXHAUSTING STEAM
DOOR SAFETY SWITCHES
AUTOMATIC TANK FILL
TOP MOUNTED STAINLESS STEEL CONTROL CABINET
115 VOLT CONTROL CIRCUIT
STAINLESS STEEL PUMP IMPELLER GUARDS
2’6” OR 4’ LOAD END - OPTIONAL LONGER LENGTH AVAILABLE
4’ OR 6’ UNLOAD END - OPTIONAL LONGER LENGTHS AVAILABLE
FLIGHT - TYPE DISHWASHERS AVAILABLE WITH VARIOUS SIZE TANKS IN ANY NUMBER
FROM SINGLE TANK ON UP.
“LC” - FLIGHT TYPE DISHWASHERS * Low water consumption
FOR LISTING OF NUMEROUS OPTIONS AND PRICING - CONTACT FACTORY OR LOCAL
SALES REPRESENTATIVE
AUTOMA
TIC TRA
Y UNLOADER*
AUTOMATIC
TRAY
Blakeslee flight type machines are available with mechanism which automatically
unloads trays and stacks them in self-leveling tray carts.
TRAY ACCUMULATOR*
Available up to 150 feet in length, variable number of carriers and other optional features
*NOTE:
Consult factory for information and pricing.
7
FLIGHT- A - ROUND/RACK-A-ROUND DISHWASHERS
Blakeslee “Flight-A-Round (“FA”)
Dishwasher is a deluxe circular
Flight-type Dishwasher. All of the
labor-saving and smooth operation
features that are built into Flight-type
dishwashers are also included in the
“Flight-A-Round” models.
SQUARE &
RECTANGLE
WASH
RINSE
BASIC OVAL
5’ - 8 3/4”
MINIMUM
WIDTH
PRE
WASH
ANY
WIDTH
FINAL RINSE
Less expensive Blakeslee “Rack-ARound (“RA”) Dishwasher dish
racks are automatically conveyed
around the soiled and clean dish
tables and through the dishwashing
machine. The dishwasher can be any
one of Blakeslee 1, 2 or 3 tank rack
conveyor models.
LENGTH
PER CHART
BELOW
CLEANOUTACCESSABILITY
ANY LENGTH
WALL
TRIANGLE
DOORS ON INSIDE
ANY LENGTH C
2’ MIN.
ANY
WIDTH
B
ANY
LEN
GTH
WALL
DOORS ON OUTSIDE
A
TYPICAL EXAMPLES
Blakeslee
Dishwasher
Model No.
Overall
Length of
Machine
Min.
Table
Width
Min. length
of Flight ARound System
3’ 4”
5’ 4”
6’ 2”
6’ 8”
8’ 0”
8’ 8”
10’ 0”
12’ 6”
5’ 8¾”
5’ 8¾”
5’ 8¾”
5’ 8¾”
5’ 8¾”
5’ 8¾”
5’ 8¾”
5’ 8¾”
9’ 0¾”
11’ 0¾”
11’ 8¾”
12’ 4¾”
13’ 8¾”
14’4¾”
15’ 8¾”
18’ 2¾”
FA-L or RA-L
FA-PL or RA-PL
FA-EE or RA-EE
FA-LL or RA-LL
FA-PEE or RA-PEE
FA-PLL or RA-PLL
FA-LLL or RA-LLL
FA-MMM or RA-MMM
*ELECTRIC BOOSTERS – CONVEYOR TYPE DISHWASHERS
D/W TYPE
40° Rise
70° Rise
Single Tank
36 k.w.
54 k.w.
Multi-Tank
30 k.w.
54 k.w.
XF-Multi-Tank
45 k.w.
2 x 30 k.w.
* For booster sizing and price on model “LC” dishwashers, contact factory.
Electric Boosters
Used with
Dishwasher Model
Booster
Interwired
Interplumbed
12 k.w., Machine mounted
D-8
$1600
15 k.w., Machine mounted
D-8
2000
15 k.w., Free standing
All models
24 or 30 k.w., Machine mounted
All models
24 or 30 k.w. Free standing
All models
36, 45 or 54 k.w., Machine mounted
All models
36, 45 or 54 k.w. Free standing
All models
$2000
2250
4000
2500
3700
4400
3100
4200
Steam Boosters
8
S2, Machine mounted
F, XF, FA, RA
S2, Free standing
All models
Double S2, Machine mounted
F, XF, FA, RA
Double S2, Free standing
All models
4100
3000
3850
6100
4400
5400
POT AND UTENSIL WASHERS
FL-121
PT-151
PT-301
Front Load
Single Rack
Pass Thru
Single Rack
Pass Thru
Double Rack
$15,000.00
$20,000.00
$30,500.00
Shpg. Wt. 900 Lbs.
7.5 H.P.
208/240-60-3
440/480-60-3
Shpg. Wt. 1150 Lbs.
7.5 H.P.
208/240-60-3
440/480-60-3
Shpg. Wt. 1650 Lbs.
10 H.P.
208/240-60-3
440/480-60-3
POT AND UTENSIL WASHER EQUIPMENT
FL-121
5 K.W. Tank Heater ........................................ $900.00
1/3 H.P. Vent Fan .......................................... $1200.00
Hold-Down Grid ............................................. $480.00
RACKS FOR FL-121, PT-151 AND PT-301
PT-151 AND PT-301
5 K.W.Tank Heater .......... (PT-151) ................ $900.00
9 K.W. Tank Heater ......... (PT-301) .............. $1180.00
Steam Injector Tank Heater ........................... $680.00
Steam Coil (Stainless Steel) ........................ $1370.00
3/4 H.P. Vent Fan .......................................... $1790.00
Hold-Down Grid .............. (PT-151) ................ $480.00
Hold-Down Grid .............. (PT-301) ................ $910.00
Bake Sheet Rack (holds ten) ......................... $380.00
General Utility Rack ....................................... $240.00
Basket (Utensil) Rack .................................... $400.00
Reversible Cake Pan Rack ............................ $250.00
Custom Racks ................................. Consult Factory
9
FOOD MIXING MACHINES
Mixers available in either
standard or deluxe finishes.
20 QT.
Stainless steel bowls and bowl guards are standard on all mixers.
30 QT.
40 QT.
60 QT.
80 qt.
FLOOR
FLOOR
BENCH
PORTABLE
FLOOR
FLOOR
FLOOR
B-20-CS
$4200.00
B-20-CA
$4400.00
U-20-CA
F-30-CS
$5675.00
F-30-CA
$5800.00
DD-40*
DD-60*
DD-60-PM*
DD-60XT-300*
DD-80*
DD-80-PM*
DD-80XT500*
$5400.00
F-20-CS
$4600.00
F-20-CA
$4750.00
$7825.00
$10,150.00
$9850.00
$10,600.00
$10,800.00
$10,600.00
$12,200.00
B-20-D
U-20-D
F-20-D
F-30-D
DD-40-D*
DD-60-D*
DD-80-D*
$5200.00
$6150.00
$5800.00
$8100.00
$9550.00
$12,400.00
DD-60XTD-300*
$12,700.00
$13,700.00
S/S BOWL
“B” BEATER
“W” WHIP
S/S BOWL
“B” BEATER
“W” WHIP
S/S BOWL
“B” BEATER
“W” WHIP
S/S BOWL
“B” BEATER
“W” WHIP
S/S BOWL
“B” BEATER
“W” WHIP
“H” HOOK
S/S BOWL
“B” BEATER
“W” WHIP
“SH” HOOK
S/S BOWL
“SH” HOOK
S/S BOWL
“B” BEATER
“W” WHIP
“SH” HOOK
S/S BOWL
“B” BEATER
“W” WHIP
“SH” HOOK
S/S BOWL
“SH” HOOK
S/S BOWL
“B” BEATER
“W” WHIP
“SH” HOOK
1/2 H.P.
110/120-60-1
208/240-60-1
208/240-60-3
1/2 H.P.
110/120-60-1
208/240-60-1
1/2 H.P.
110/120-60-1
208/240-60-1
208/240-60-3
3/4 H.P.
110/120-60-1
208/240-60-1
208-240-60-3
1-1/2 H.P.
2 H.P.
208/240-60-1 208/240-60-1
208/240-60-3 208-240-60-3
440/480-60-3 440/480-60-3
3 H.P.
208/240-60-3
440/480-60-3
3 H.P.
208/240-60-3
440/480-60-3
2 H.P.
208/240-60-1
208/240-60-3
440/480-60-3
3 H.P.
208/240-60-3
440/480-60-3
5 H.P.
208/240-60-3
440/480-60-3
185 LBS.
350 LBS.
210 LBS.
275 LBS.
1100 LBS.
1100 LBS.
1100 LBS.
1100 LBS.
1150 LBS.
1000 LBS.
1100 LBS.
NOTE: 6 foot cord and plug furnished as part of standard
equipment on 110-volt models. If a permanent connection is
preferred, a tapped outlet is furnished for 1/2” conduit.
Minimum wire size recommended........................No. 14 A. W. G.
*440/480-60-3 on 40, 60 and 80 qt. models $600.00 additional.
ATTACHMENTS (FOR MIXERS AND FOOD CUTTERS)
9” VEGETABLE SLICERS
9” Vegetable Slicer Complete with Adjustable Slicer
Plate and Hopper Front ...... Part No. 20581 ........ $775.00
Grater Plate ........................ Part No. 15071 .......... $80.00
Shredder Plates 3/32” ...... Part No. 15088 .......... $80.00
3/16” ...... Part No. 15021 .......... $80.00
5/16” ...... Part No. 15019 .......... $80.00
1/2” ........ Part No. 15072 .......... $80.00
Hub and Shaft Assembly (only one required for all sizes of
shredder and grater plates).
Part No. 20599 ........ $250.00
10
DD-80XTD-500*
$14,500.00
Options: DD-60 and DD-80
Power bowl lift ............................... $2200.00
Tall column 15-1/2”
higher than standard .................... $3100.00
(includes power bowl lift)
Mixing Light .................................... $550.00
9” CHEESE SHREDDER ATTACHMENT
9” Cheese Shredder Complete with Hub & Shaft,
5/16” Shredder Plate and Hopper Front.
Part No. 99731 ........ $700.00
FOOD & MEAT CHOPPER ATTACHMENT
Meat Chopper, Double Tinned,
with Knife & 1/8” Plate
Part No. 20447 ........ $475.00
Extra Knives for Meat Chopper
Part No. 1901 ............ $50.00
Extra Plates for Meat Chopper
1/8”
Part No. 1902 ............ $50.00
3/16”
Part No. 1903 ............ $50.00
1/4”
Part No. 1904 ............ $50.00
3/8”
Part No. 1905 ............ $50.00
1/2”`
Part No. 1906 ............ $50.00
BOWLS, BEATERS, WHIPS & ATTACHMENTS
IMPORTANT These prices apply for accessories ordered with new machines.
For existing machines contact parts distributor or factory.
Item
Bowl
Capacity
B-20,
12qt.
U-20,
F-20
20qt.
20 qt.
F-30
30qt.
20qt.
DD-40 30qt.
40qt.
30qt.
DD-60 40qt.
60qt.
30qt.
40qt.
DD-80
60qt.
80qt.
“W” Wire
“B”
Whip
Batter
Beater S.S. S.S. Wires
“H”
Dough
Hook
Bowl
Adapter
“B”
Batter
Beater
1377
3455
1517
$410.00
Not
$130.00
$225.00
$145.00
1717
required
Bowl
S.S.
1716
$390.00
3315
$430.00
Not
3310
required
$590.00
1367
72556
3456
1385
$130.00
$600.00
$225.00
$145.00
1378
72585
3458
1513
$130.00
$600.00
$250.00
$160.00
1973
72557
3459
1987
$150.00
$650.00
$260.00
$200.00
75873
75874
75875
75876
$470.00
$140.00
$265.00
$195.00
98513
98521
72558
98501
98517
$600.00
$150.00
$660.00
$270.00
$240.00
“SH” Sprial “SD” Sweet
Dough
Dough
Hook
Beater
N/A
N/A
“PK”
Pastry
Knife
“PK”
“M”4
Pastry
Wing
Knife S.S. Whip S.S.
1543
N/A
$185.00
N/A
N/A
N/A
N/A
N/A
Bowl
Truck
Painted
Bowl
Extension
Ring S.S.
Splash
Cover
S.S.
Bowl
1734
1737
Trucks
$245.00
$210.00
1394
1538
73396
1542
are not
1735
1738
$220.00
$185.00
$315.00
$275.00
inter-
$275.00
$210.00
1512
1544
1573
change-
1735
1738
$220.00
$235.00
$350.00
able
$275.00
$210.00
1979
1976
73844
1978
7125
1736
14618
$230.00
$260.00
$350.00
$340.00
$380.00
$300.00
$240.00
75877
75878
75859
75881
75882
$315.00
$325.00
$475.00
$285.00
$225.00
98520
99481
98500
77156
99493
99491
$325.00
$340.00
$550.00
$380.00
$300.00
$240.00
98508
98515
75880
98506
98522
98516
99479
98505
76729
99474
99477
$760.00
$160.00
$710.00
$365.00
$285.00
$335.00
$485.00
$550.00
$380.00
$300.00
$250.00
98513
99040
98521
72558
98501
98517
$600.00
$310.00
$150.00
$660.00
$270.00
$240.00
N/A
98520
99481
98500
7125
99493
99491
$325.00
$340.00
$550.00
$380.00
$300.00
$240.00
98508
99040
98515
75880
98506
98522
98516
99479
98505
7125
99474
99477
$760.00
$310.00
$160.00
$710.00
$365.00
$285.00
$335.00
$485.00
$550.00
$380.00
$300.00
$250.00
N/A
98108
98268
72299
98271
$890.00
$175.00
$750.00
$365.00
98513
99100
98521
72558
98501
98517
$600.00
$310.00
$150.00
$660.00
$270.00
$240.00
98269
98504
99472
98502
15094
96003
99119
$295.00
$400.00
$535.00
$550.00
$425.00
$310.00
$260.00
N/A
98520
99481
98500
7125
99493
99491
$325.00
$340.00
$550.00
$380.00
$300.00
$240.00
98508
99100
98515
75880
98506
98522
98516
99479
98505
7125
99474
99477
$760.00
$310.00
$160.00
$710.00
$365.00
$285.00
$335.00
$485.00
$550.00
$380.00
$300.00
$250.00
N/A
99059
98268
72299
98271
$890.00
$175.00
$750.00
$365.00
98023
98019
72290
98021
$1050.00
$190.00
$835.00
$395.00
N/A
SOUP STRAINER AND COLANDER with Puree Beater and
1 Sieve with 1/8” perforations. Drain into 20 or 30 qt. bowl.
20 Qt.
Part No. 1612
$450.00
30 Qt.
Part No. 3381
$600.00
Extra Sieves for Soup Strainer and Colander with 1/8” or
3/32” perforations.
20 Qt.
Part No. 3384-3/32”
Part No. 3387-1/8”
$180.00
BOWL RETAINER
20 Qt
Part No. 72403
$100.00
30 Qt.
Part No. 3385-3/32”
Part No. 3388-1/8”
$190.00
30 Qt.
Part No. 72400
$100.00
98269
98504
99472
98502
15094
96003
99119
$295.00
$400.00
$535.00
$550.00
$425.00
$310.00
$260.00
98020
97681
99470
97674
15094
3439
99120
$325.00
$420.00
$570.00
$570.00
$425.00
$320.00
$280.00
COMBINATION RECEIVING PAN BRACKET AND
OVERSHELF
20 and 30 Qt. models ................ Part No. 3322 ............ $400.00
60 and 80 Qt. models ................ Part No. 72314 .......... $450.00
BOWL GUARD - TYPE “B” - VERTICAL LIFT
20 and 30 Qt. models ................ Part No. 73830 .......... $100.00
60 and 80 Qt. models ................ Part No. 73835 .......... $100.00
BOWL SCRAPER
20 Qt. models ............................ Part No. 73757
30 Qt. models ............................ Part No. 73758
40 Qt. models ............................ Part No. 76840
60 Qt. models ............................ Part No. 73759
80 Qt. models ............................ Part No. 73760
.......... $410.00
.......... $480.00
.......... $560.00
.......... $620.00
.......... $700.00
11
POTATO / VEGETABLE PEELERS
S-15-T
Bench Type With Timer
15-20 lbs cap.
1/3 H.P.
Cord and plug
115/230-60-1
Shpg. Wt. 136 Lbs.
$2125.00
OPTIONAL
Portable Stand ...$350.00
Peel Trap Basket $100.00
XC-15-T
XC-30-T
Floor Type With Timer
15-20 lbs. cap
1/3 H.P.
115/230-60-1
Includes S.S. peel trap
Shpg. Wt. 168 Lbs.
Floor Type With Timer
30-33 lbs. cap.
3/4 H.P.
115/230-60-1
208/240-60-1
Include S.S. peel trap
Shpg. Wt. 186 Lbs
$3250.00
$4375.00
XC-60-T
Floor Type With Timer
50-60 lbs. cap.
1 H.P.
115/230-60-1
208/240-60-1
Include S.S. peel trap
Shpg. Wt. 194 Lbs.
$4950.00
All models available 3 phase without timer.
BURNISHERS
BB-914
SILVER BURNISHER PRICES
Prices include burnishing balls and approx. 1 month supply of compound
Model
Price
Shp’g Wt.
Motor Size
BB-914
$5350.00
185 lbs.
3/4 H.P.
BB-2016
$7900.00
460 lbs.
1 H.P.
BB-1224
$10,250.00
580 lbs.
1-1/2 H.P.
All burnishers furnished with 110 volt, 60 cycle, 1 phase motors.
12
Note: Burnishers - 220 volt, 50 or 60 cycle .......................................................... CONTACT FACTORY
Additional Burnishing Compound 1 case 4/1 gallon bottles ........ PART NO. 18020 ................. $200.00
BB-2016
BB-1224
A BLAKESLEE EXCLUSIVE
Special porcelain-ceramic burnishing balls (never rust) now
make it possible to restore luster and brightness to
stainless-steel flatware and hollow ware as well as silver.
Additional Burnishing Balls
Sold by carton only
8-5 # Boxes ...PART NO. 18021 ..... $750.00...40 lbs.
40# Bulk.........PART NO. 18026 ..... $725.00...40lbs.
FOOD SLICERS
GS-12L
GS-12
Polished Anodized
Aluminum & Stainless Steel
Polished Anodized
Aluminum & Stainless Steel
$2000.00
$2700.00
50 lbs.
1/3 h.p., 120-60-1
70 lbs.
1/2 h.p., 120-60-1
GS-12AA
Automatic
Polished Anodized
Aluminum & Stainless Steel
$6600.00
150 lbs.
1/3 h.p., 120-60-1
FOOD CUTTERS
WITH STAINLESS STEEL BOWL
FC-18
(Without attachment hub.)
$7000.00
130 lbs.
1 h.p., 115-60-1
FC-18-AH
(With attachment hub.)
$7650.00
160 lbs.
1 h.p., 115-60-1
Additional 4” legs (set of 4) std.
For all models-30” High Tubular Floor Stand with Casters ..... $650.00
13
PARTS & SERVICE
Blakeslee Authorized Parts & Service Distributors and Preferred Service Agents are the focal point for service and are responsible for all warranty/repair work and
for maintaining a complete stock of replacement parts.
They have factory-trained servicemen and are kept informed by the factory on the latest servicing procedures.
To receive service and/or parts, call the Blakeslee Distributor nearest you. If you happen to be in one of the few states not covered by a distributor, phone the nearest
Distributor of the Blakeslee Service Department in Chicago at 708/656-0660 for the name and location of one of over 300 strategically-located Blaskeslee Authorized
Service Agencies, that is nearest you.
ALABAMA
FLORIDA (Cont.)
LOUISIANA
NEW YORK
Jones McLeod Appliance Co.
1616 Seventh Ave., North
Birmingham, AL 35203
205/251-0159
Nass Service Co., Inc.
1108 S. Woods Ave.
Orlando, FL 32805
407/425-2681
Chandler’s Parts & Service, Inc.
11656 Darryl Drive
Baton Rouge, LA 70815
225/272-6620
Acme American Repairs Inc.
99 Scott Ave.
Brooklyn, NY 11237
718/456-6544
Duffy’s Rest. Equip. Servuce
3138 Oneida Street
Sauquoit (Utica), NY 13456
315/737-9401
ARIZONA
GEORGIA
MARYLAND
Byassee Equipment
1939 E. Washington
Phoenix, AZ 85034
602/252-0402
TWC
5080 Highlands Pkwy S. A150
Smyrna, GA 30082
770/438-9797
Electric Motor Repair Co.
9100 Yellow Brick Road, STE H
Rosedale, MD 21237
410/467-8080
ARKANSAS
HAWAII
MASSACHUSETTS
Bromley Parts & Service
806 Izard Street
Little Rock, AR 72202
501/374-0281
Commercial Appliance
Parts & Service Co.
1623 Democrat St.
Honolulu, HI 96819
808/841-4545
Ace Service Co., Inc.
95 Hampton Avenue
Needham (Boston), MA 02494-2628
781/449-4220
CALIFORNIA
MICHIGAN
IDAHO
Acme Pacific Repairs, Inc.
1347 Fulton Place
Fremont, CA 94539
510/252-2070
Barker’s Food Machinery Service
5367 Second Street
Irwindale, CA 91706
626/960-9390
Chapman Appliance Service
1784 San Diego Ave.
San Diego, CA 92126
619/298-7106
Sterling Service
644 W. Hawthorne Street
Glendale, CA 91204
818/243-1234
COLORADO
Metro Appliance Service
1640 S. Broadway
Denver, CO 80210
303/778-1126
CONNECTICUT
A-Tech Service, Inc.
468 Hayden Station Road
Windsor, CT 06095
860/649-6627
DISTRICT OF COLUMBIA
Electric Motor Repair
9100 Yellow Brick Road, STE H
Rosedale, MD 21237
410/467-8080
FLORIDA
Commercial Appliance Service Co.
8416 Laurel Fair Circle
Tampa, FL 33610
813/663-0313
Dade Restaurant Repair
14042 N.W. 82nd Avenue
Miami Lakes, FL 33016
305/887-0783
14
GCS
3373 Northwest 168th Street
Miami, FL 33056
305-623-7001
Boise Appliance
7539 W. Mossy Cup Street
Boise, ID 83709
208/343-0103
ILLINOIS
Eichenauer Food
Equipment Service
130 S. Oakland Ave.
Decatur, IL 62522
217/429-4229
General Parts Inc.
248 James Street
Bensenville, IL 60106
630/595-3300
E & G Appliance Service Co.
1435 Lawndale Ave.
Detroit, MI 48209
313/842-2252
Midwest Food
Equipment Service
3055 Dixie
Grandville, MI 49418
616/261-2000
MINNESOTA
GCS
5480 Nathan Lane #130
Minneapolis, MN 55442
763/546-4221
MISSISSIPPI
Rescor
5344 East Ave.
Countryside, IL 60525
708/352-3155
Camp Service & Parts Inc.
328 B Oakdale Street
Jackson, MS 39201
601/353-9700
INDIANA
MISSOURI
GCS
5310 East 25th Street
Indianapolis, IN 46218
317/545-9655
IOWA
Goodwin-Tucker Group
2900 Delaware Ave.
Des Moines, IA 50137
515/262-9308
KANSAS
General Parts, Inc.
1101 E. 13th Street
Kansas City, MO 64106
816/421-5400
KENTUCKY
GCS
4600 Shepherdsville Road
Louisville, KY 40218
502/367-1788
GCS
533 A Codell Drive
Lexington, KY 40509
859/269-7484
Kaemmerlen Parts &
Service, Inc.
1539 S Kings Highway
St. Louis, MO 63110
314/535-2222
NEBRASKA
Goodwin-Tucker Group
7535 D Street
Omaha, NE 68124
402/397-2880
NEVADA
Burney’s Commercial
Service Co., Inc.
4480 Aldebaran Ave.
Las Vegas, NV 89103
702/736-0006
NEW MEXICO
R & B Service
4412 Towner N.E.
Albuquerque, NM 87110
505/889-4090
NORTH CAROLINA
Authorized Appliance
Servicenter, Inc.
1020 Tuckaseegee Road
Charlotte, NC 28208
704/377-4501
OHIO
Akron Restaurant Repair
1169 W. Waterloo Road
Akron, OH 44314
330/753-6635
Commercial Parts & Service
6940 Plainfield Road
Cincinnati, OH 45236
513/984-1900
Electrical Appliance Repair
5805 Valley Belt Road
Cleveland, OH 44131
216/459-8700
OKLAHOMA
Krueger Electric Services, Inc.
100 N.E. 24th Street
Oklahoma City, OK 73105
405/528-8883
OREGON
Ron’s Service Inc.
16364 S.W. 72nd Ave.
Portland, OR 97224
503/624-0890
PENNSYLVANIA
American Kitchen Machine Corp.
204 Quarry Street
Philadelphia, PA 19106
215/627-7760
Authorized Factory Service, Inc.
940 First Ave.
Coraopolis(Pittsburgh), PA 15108
412/262-2330
K & D Parts & Service Co.
1833-41 N. Cameron St.
Harrisburg, PA 17103
717/236-9039
SOUTH CAROLINA
Whaley Electrical Service
137 Cedar Road
Lexington, SC 29073
803/996-9920
TENNESSEE
A-Tech
424 Sixth Avenue South
Nashville, TN 37203
615/255-2002
FESCO
1209 S. Watkins
Chattanooga, TN 37404
423/624-3381
GCS
3717 Cherry Road
Memphis, TN 38118
901/366-4587
TEXAS
Commercial Kitchen Repair
1377 N. Bravos
San Antonio, TX 78207
210/735-2811
Kenco Service
26 Lyerly - Suite 1
Houston, TX 77022
800/356-5189
Stove Parts Supply Co.
2120 Solana
Fort Worth, TX 76117
817/831-0381
UTAH
LaMonica’s Restaurant
Equp. Service
6211 S 380 West
Murray, UT 84107
801/263-3221
VERMONT
Authorized Appliance
74th River Street
Rutland, VT 05701
802/775-5588
VIRGINIA
Daubers Inc.
7645 Dynatech Court
Springfield, VA 22153
703/866-3600
WASHINGTON
Walsh Equipment Repair
1519 128th Place N E
Bellevue, WA 98005
425/462-1645
WEST VIRGINIA
Authorized Factory Service
Edens Fork Exit I 77
Charleston, WV 25312
304/344-8225
WISCONSIN
Genral Parts Inc.
W223 N. 735 Saratoga Dr.
Waukesha, WI 53186
262/650-6666
ASCI, Inc.
2439 Atwood Avenue
Madison, WI 53704
608/246-3160
SALES REPRESENTATIVES’ TERRITORIES
Alabama
Alaska
Arizona
Arkansas
California
Colorado
Columbus, District of
Connecticut
Territory
16
19
23
7
North 9
South 11
4
21
3 & 12
Delaware
Florida
Georgia
Hawaii
Idaho
Illinois
Indiana
Iowa
Kansas
Territory #1
Extreme Northeastern portion of Illinois
(east of Rte. 51 and north of Rte. 36,
including Springfield and Peoria)
Wisconsin (south of Rt. 33 and east of
Rt. 27) and Lake County, IN
Gent-Young & Associates
240 James St.
Bensenville, IL 60106
Tel.: 630/227-9900
Fax: 630/227-9904
Tom Young
Tom Hanna
Joe Tracz
Mike Curtis (Wisconsin)
Tel.: 414/426-1481
Fax: 262/513-9679
Territory #2
North and South Carolina
Mark A. Lee & Associates
8817 Cherry Blossom Lane
Cornelius, NC 28031
Tel.: 704/892-8344
Fax: 704/892-6250
Mark Lee
Territory #3
Connecticut (except Fairfield County),
Massachusetts, Maine, New Hampshire,
Rhode Island and Vermont
P.F.I.
Pardee, Freeman Inc.
221 Washington St.
Gloucester, MA 01930
Tel: 978/281-2700
Fax: 978/281-2987
Harry Pardee, Owen Freeman
Territory #4
Colorado, Montana, South Dakota
(west of Missouri River), Utah and Wyoming
Baltzer & Associates
8115 W. 48th Ave.
Wheatridge, CO 80033
Tel.: 303/480-0554
Fax: 303/480-1454
Terry Baltzer, Steve Vassau
Cleve Campbell (Utah)
Tel: 801/484-6841
Fax: 801/484-6842
Territory #5
Florida
Florida Agents
275 96th Ave. No.
Suite 2
St. Petersburg, FL 33702
Tel.: 727/572-5200
Fax: 727/576-7766
Territory #7
Arkansas, Louisiana, Mississippi and
Tennessee
Equipment Concepts, Inc.
3078 Boxdale Street
Memphis, TN 38118
Tel.: 901/363-7135
Fax: 901/794-5113
Mike Corlew
Bill Collier (Nashville)
Tel.: 615/876-0893
Fax: 615/876-7344
Bruce Cameron (Louisiana)
Tel.: 985/626-8662
Fax: 985/626-1932
Territory
17
5
16
24
19
1 & 18
1&8
18
18
Kentucky
Louisiana
Maine
Maryland
Massachusetts
Michigan
Minnesota
Mississippi
Missouri
Territory
14
7
3
21
3
10
15
7
18
Montana
Nebraska
Nevada
New Hampshire
New Jersey
New Mexico
New York
North Carolina
North Dakota
Territory #8
Indiana
Byrne & Associates Inc.
1083 Hicks Boulevard
Fairfield, OH 45014
Tel.: 513/829-9117
Fax: 513/829-1638
Dennis Byrne
Territory #9
California (north of southern boundaries
of Monterrey/Kings/Tulare and Inyo
counties); and Nevada (north of northern
boundaries of Esmeralda/Nye and
Lincoln counties)
Contact Factory 708/656-0660
Territory #10
Michigan
United Foodservice Solutions
325 S. Clinton Street
Grand Ledge, MI 48837
Tel: 517/627-8180
Fax: 517/627-8987
Leon (Link) Hubbard
Territory #11
California (south of southern boundaries of
Monterrey/Kings/Tulare and Inyo counties)
and Nevada (south of northern boundaries
of Esmeralda/Nye and Lincoln counties, and
also to include Clark County).
Contact Factory
708/656-0660
Territory #12
Fairfield County, Connecticut; New York
(south of and including Sullivan/ Ulster and
Dutchess counties); New Jersey (north of
and including Hunterdon/Sommerset/
Middlesex and Monmouth counties)
Dealers Choice
10 Ellsworth Road
Larchmont, NY 10538
Tel.: 914/833-2070
Fax: 914/833-2073
Joe Bruno
Territory #13
Texas (except El Paso) and Oklahoma
E-QWIP Marketing Group
P.O. Box 41582
Houston, TX 77241
Tel.: 713/466-7450
Fax: 713/466-1956
John Lindabury
Cliff Gaskill (Dallas)
Tel: 214/637-2040
Kevin Clifton (OK)
Tel: 405/350-9919
Territory
4
18
9 & 11
3
12 & 17
22
12 & 20
2
15
Ohio
Oklahoma
Oregon
Pennsylvania
Rhode Island
South Carolina
South Dakota
Tennessee
Texas
Territory
14
13
19
17 & 20
3
2
4 & 15
7
13 & 22
Territory #14
Kentucky, Ohio and West Virginia (except
Grant/Hardy/Mineral/Morgan/Berkeley/
Hampshire and Jefferson counties)
Byrne & Associates Inc.
1083 Hicks Boulevard
Fairfield, OH 45014
Tel.: 513/829-9117
Fax: 513/829-1638
Dennis Byrne
Eric M. Maynard
Tel: 440/371-3734
Jim Escola (Louisville)
Tel: 800/735-7928
Fax: 513/829-1638
Territory #15
Minnesota, North Dakota, South Dakota
(east of Missouri River) and Wisconsin
(north of Rt. 33 and west of Rt. 27)
Contact Factory - 708/656-0660
Territory #16
Alabama and Georgia
Food SVS Applications
6000 Live Oak Pkwy
STE 111-B
Norcross, GA 30093
Tel.: 678/990-4933
Fax: 678/990-4937
David Terrell
Tom John
Tel: 678/410-0831
Territory #17
Southern New Jersey (south of and
including Mercer/Burlington and
Ocean counties); Eastern Pennsylvania
(east of eastern boundaries of McKean/
Cameron/Clearfield/Centre/Huntingdon
and Fulton counties);
Delaware
The Buckingham Group
425 Otter Street
Bristol, PA 19007
Tel: 800/477-4379
Fax: 215/785-1340
Chuck Stabeno
Barrett Johnson
Chris Stummer
Territory #18
Kansas, Missouri, Iowa, Nebraska and
Illinois (west of Rte. 51 and south of
Rte.36, excluding Springfield and Peoria)
BSHL Group
726 Hanley Industrial Court
St. Louis, MO 63144
Tel.: 314/781-2225
Fax: 314/781-5874
Richard Spener, David Brinkley
Ralph Larkin, Greg Daniels (Kansas City)
Tel.: 913/888-2010
Fax: 913/888-4858
Utah
Vermont
Virginia
Washington
West Virginia
Wisconsin
Wyoming
Territory
4
3
21
19
14 & 21
1 & 15
4
Territory #19
Washington, Oregon, Idaho, and Alaska
Schulz Associates
711 Kirkland Avenue
Kirkland WA 98033
Tel: 425/828-4557
Fax: 425/828-6762
Jeffrey Schulz
Territory #20
New York (north and west of and
including Delaware/Greene/
Columbia counties);
Western Pennsylvania (west of eastern
boundaries of McKean/Cameron/
Clearfield/Centre/Huntingdon/
Fulton counties)
J. Wilson Marketing LTD.
34 Ray Road
Greenwich, NY 12834
Tel.: 518/692-8083
Fax: 518/692-8084
Joe Wilson
Rob Vickers (Buffalo)
Tel: 716/472-6317
Fax: 716/877-0172
Territory #21
District of Columbia, Maryland,
Virginia, West Virginia (counties of
Grant/Hardy/Mineral/Morgan/Berkeley/
Hampshire and Jefferson)
JMJ Associates
300 Bowline Road
Severna Park, MD 21146
Tel.: 410/544-5625
Fax: 410/544-1211
Jack McIlvaine
Territory #22
New Mexico and El Paso, Texas
MG Marketing Co.
6005 Azure Ave., NE
Albuquerque, NM 87109
Tel.: 505/881-1908
Fax: 505/883-7446
Lenny Steeves
Territory #23
Arizona
Keating Sales & Marketing
631 So. 83rd Way
Mesa, AZ 85208
Tel: 480/926-7849
Fax: 480/926-9158
Chuck Keating
Michael Moffet
Territory #24
Hawaii
Angell & Associates
364 Mamaki Street
Honolulu, HI 96821
Tel.: 808/373-1226
Fax: 808/377-5614
R. Bruce Angell
15