120V Pro line product brochure
Start with Power
advanced power
management solutions
for audio, video, and
broadcast proffessionals
120V PRO LINE PRODUCT CATALOG
Index
Series Multi-Stage Protection (SMP). . . 4
Merit X Series Products. . . . . . . . 12
Power Distribution . . . . . . . . . . . 22
Extreme Voltage Shutdown (EVS). . . . . 5
Power Station Power Conditioners. . . 13
Power Relays. . . . . . . . . . . . . 22
Linear Filtering Technology (LiFT). . . . 6
Contractor Series -Power Sequencers. . 14
True RMS Voltage Regulation . . . . . . 7
Power Relay Control Panels . . . . . . 22
Power Factor Power Conditioners. . . . 17
Battery Backup (UPS) . . . . . . . . . 23
Power Factor Technology. . . . . . . . 8
Advanced Voltage Regulators /
Power Conditioners . . . . . . . . . . 18
Battery Backup (Extras) . . . . . . . . 24
Clear Tone Technology . . . . . . . . . 8
Power Sequencing . . . . . . . . . . . 8
BlueBOLT System Management. . . . . 25
Symmetrically Balanced Power . . . . . 9
World Tour Voltage Regulator /
Power Conditioner . . . . . . . . . . . 19
Battery Backup . . . . . . . . . . . . . 9
Balanced Power Conditioner. . . . . . 20
Power Accessories . . . . . . . . . . . 30
BlueBOLT™ . . . . . . . . . . . . . . . 9
Compact Power Conditioners . . . . . . 21
Rack Lights and Gooseneck Lamps. . . 30
Classic Series Power Conditioners. . . 10
In-Wall Solutions. . . . . . . . . . . . 21
Icon Glossary. . . . . . . . . . . . . 31
Panamax Pro. . . . . . . . . . . . . . 27
Hear what our Customers Are Saying:
“I recently purchased a Furman P-2400 IT
for my recording studio with the primary
goal of lowering the noise floor. What I got
in addition to this 3-RU, heavy duty (nearly
100lb) box was a measure of sonic fidelity I
had no idea my gear could achieve…
I can hear more depth, transients have
more punch, there’s a crispness in the
upper frequencies and a tightness in the
low mids…the biggest thing I was struck
by was how much of a blatant improvement it was…The Furman P-2400 IT has
taken my potential to a whole new level
because I can simply hear things more
accurately. Grimy power no longer creeps
into the chain and fogs the information
I’m hearing…I have no doubts that the
2
Furman P-2400 IT is the most important
piece of gear that I own.”
– Lucas Jones
Electrical protection and filtering are
very important to me…I want the gear
I invested in to sound its absolute best.
Furman is the brand that I completely
trust for protection and filtering! – Jeff Hansen
Furman goes to my short list of 5 star
companies that: 1) make quality products;
and 2) have quality service.
– Al Johnson
I wanted to let you know that a PL-8C
saved my equipment this weekend. I truly
believe had I not had your equipment
protecting my equipment that I would
probably be replacing my DSP and
2 amps.
Thank you Furman!
– Richard Covington
I’ve been skeptical in the past about
the benefits of power conditioning
and filtering equipment, but no more.
You can bet I’ll be back for more Furman
power conditioning equipment.
– Eric Wadley
The PF-Pro R is awesome.
My amp never sounded this good.
– Bob Boisselle
FurmanPower.com - more TESTIMONIALS
About furman
Founded in 1974, F urman is
Awards:
the leading provider of power management solutions
for audio, video and broadcast professionals.
From pioneering the concept of power conditioning
in 1983 to introducing advanced technologies
such as Series Multi-Stage Protection and Linear
Filtering Technology, Furman is committed to
providing the highest level of performance
and protection to equipment used in missioncritical applications around the world.
WHAT ARE YOU PLUGGING INTO?
Plug Into What The Pros Use! Furman is the go-to name in AC power
management for professional musicians, sound engineers,
broadcasters, and systems integrators around the world.
www.furmansound.com
3
THE FURMAN DIFFERENCE
For over 40 years, Furman has been the industry’s most trusted name in AC
conditioning, regulation, balanced isolation transformers, sequencing and distribution
for audio, video, and broadcast professionals. Our clients include respected
professional musicians, renowned recording studios, commercial contractors, and
touring groups that handle major concert tours across North America and across the
world. They choose Furman because of our reputation for reliability, our engineering
expertise, and our years of experience focusing on the specific needs of industry
professionals who cannot afford equipment failure or downtime.
Furman has earned its reputation of trust around the world as a result of the
billions of dollars worth of equipment saved from power problems, and because of
its innovative technologies which maximize an A/V system’s performance. For our
clients, operating a system without the safe, clean power delivered by a Furman unit
is simply out of the question.
FURMAN FEATURES AND TECHNOLOGIES
Series Multi-Stage Protection (SMP)
Audio/video professionals can never accept down time, corrupted data, or unreliability.
It is for this reason that a robust, professional level transient voltage surge suppression
system, such as SMP, is the best choice for critical applications.
With SMP, there is virtually no downtime. In fact, the circuit is tested to handle multiple
6000 volt or 3000 amp pulses without sustaining any damage. This is far beyond the
demands placed on typical surge suppressors. But because of the extreme conditions and
critical applications faced by Furman’s clients, the SMP circuit has been designed to pass
this severe test and ensure that equipment damage or maintenance is extremely unlikely.
Furman’s SMP relies on a network of components to slow down the impact of a potentially catastrophic surge by capturing it, dissipating it in the form of heat, and absorbing
the remaining excess energy. When tested with multiple 6,000V/3,000A surges, the SMP
circuit’s maximum let-through voltage is 188V Pk (133V RMS - only 11% higher than a
nominal 120V line). Due to the design of the circuit, it will not degrade over time (unlike
most standard surge suppressors) and will show minimal increase in line impedance
(unlike many advanced surge suppressors).
Furman’s SMP Circuit:
188V Pk measured let-through voltage
4
Typical non-sacrificial circuit:
461V Pk measured let-through voltage
The SMP circuit is not simply designed to
protect from a catastrophic surge, such
as a lightning strike - it is engineered to
provide maximum life to connected equipment. This means it not only protects
from devastating spikes and surges, but
also offers protection from the dozens to
hundreds of small spikes and surges your
equipment is exposed to on a daily basis.
Engineered to provide maximum life to
connected equipment.
These common voltage surges, although
small, can have a serious adverse effect
over the long-term. Even when protected
by a standard surge protector, digital
circuits can see long-term damage due to
exposure to voltage on the ground line,
causing intermittent behavior, equipment
lock-ups, and data loss. By absorbing
these everyday surges without deterioration of the circuit or contamination of the
ground line, Furman’s SMP maximizes
the longevity of connected equipment and
minimizes the risk of downtime or failure in
mission-critical applications.
HEAR WHAT THE PROS ARE SAYING:
With the Furman P-1800 PF R I Know
I’ll get the tone I expect at every show.
I wouldn’t peform without my Furman. - John 5
All of your equipment is only as good as
the electricity you’re using. With Furman I
know what I’m getting!
- Mick Thomson, Slipknot
Fuman eliminates noise and interference
I was getting before, and my tone is
consistent now… Plus it gives me peace
of mind knowing that my gear is fully
protected. I will never be caught without
a Furman again. - Jason Hook, 5 Finger Death Punch
Surge protection and power conditioning
seem like very small parts of a complex
system like a stadium’s slow-motion video,
but if there comes a time when you really
need it, it’s suddenly the most important.
- Mark Sackett, Project Manager &
Systems Engineer for Diversified Systems
The last thing you want to worry about
during a show is power. Protect yourself
with a Furman.
- Bradley Johnson, live sound engineer
The CN Series is the one element of the
system that makes sure all the rest of
them are safe.
- Seung Yoon (DMC-E), System Engineer,
Audio Visual Associates
Whether I’m on stage with Shinedown or in
the studio, Furman powers my world.
- Eric Bass, Shinedown
With Furman in my rack, I can concentrate
on playing – and not worry about my rig!
- Jerry Horton, Papa Roach
About furman
For the last 10 years I’ve gotten
paid to do what I do for over a dozen
platinum selling artists. My artists trust
me… and I trust Furman!!!
- Hoogie, guitar and bass tech
The CN-2400S is reliable, simple
to install, intuitive to program and
easy to for end users to operate.
It’s become out first choice for
power protection.
- Nathan Miller, Owner,
Commercial Sound And Video
FurmanPower.com
more TESTIMONIALS
Extreme Voltage Shutdown (EVS)
Transient spikes and ground contamination
are not the only problems faced by
today’s sensitive electronics. There are
also sustained over-voltage conditions,
sometimes called extreme voltages. Many
surge suppression devices will not be
able to protect equipment from sustained
over-voltages. These conditions can occur
for multiple reasons: a power pole may
be damaged during a storm or accident;
or, in many countries, such as USA and
Canada, lost or intermittent neutral wiring
of a multiple-zone system can result in
a sudden connection well in excess of
Furman’s EVS constantly monitors incoming voltage, and once any over-voltage condition
over 137 volts AC is detected, a relay opens which immediately shuts down the unit and all
connected equipment. An indicator light informs the user there is a problem, and once the
condition has been corrected, the unit may be reset or auto-reset (depending on model)
and will operate normally.
Without proper protection, the
end result is destroyed equipment,
or at best, a destroyed surge
suppression system.
208 volts AC. Many surge suppression
devices are not equipped to handle these
kinds of conditions. Without proper
protection, the end result is destroyed
equipment, or at best, a destroyed surge
suppression system.
Standard power strips are not equipped to handle sustained over-voltage conditions.
www.furmanpower.com
5
120V PRO LINE PRODUCT CATALOG
Linear Filtering Technology (LiFT)
While delivering your power, your AC
tap also delivers a significant amount of
line noise. This is due to many reasons:
the widening popularity of switching
power supplies and the harmonics they
backfeed into our AC power mains, the
deterioration of our power grid from
age and use, and the noise pollution
generated from the massive amounts
of electronic devices on our grid at any
given time, among others. When this
AC noise couples into critical circuits,
it will distort and mask low-level signal
information. This information is vital to
today’s high-performance, high-definition video and audio.
Furman’s LiFT employs a finely tuned
low-pass filter to reduce the differential
AC noise coming through your line. What
is significant about Furman’s filtering is
that it reduces the AC noise in a linear
fashion across a very wide bandwidth.
6
Prior filtering schemes (such as those
found in most AC conditioners and in
Furman’s own conditioners prior to
developing LiFT) reduce noise unevenly,
creating a noise attenuation curve that
resembles a roller coaster. This is akin
to a poor job of equalizing a recording.
Output of real-time noise analysis software, showing
the noise attenuation curve of a standard AC noise
filter. Note the uneven shape of the output curve (the
green line).
With Furman’s LiFT, differential AC noise
is reduced linearly, across a very wide
bandwidth, even extending into the video
frequencies. This results in a lower noise
floor for your audio system, improved
picture on your video display, and
protection from possible data corruption
and losses caused by low-level differential AC noise fed into digital systems.
Output of the same analysis using Furman’s Linear
Filtering Technology. As you can see, the output noise
attenuation curve is smooth and linear, without the
resonant peaking seen in the standard filter.
About furman
True RMS
Voltage Regulation
Another power quality issue facing today’s
electronics is irregular voltage. While we
may expect a constant 120V to be supplied
by our power utility, such an expectation is
not realistic.
The only national standard regarding
voltage is known as ANSI C84.1. It establishes recommended voltage ranges as
114V to 126V as the service voltage, (typically the connection point between utility
and customer) and 104V to 127V as the
utilization voltage, (typically the termination point to the equipment). While these
standards were well within the operating
parameters of most equipment in use when
the standard was written in 1954, today’s
sensitive equipment is much more susceptible to such large irregularities in the
incoming voltage.
Today’s power supplies are designed to
operate at the optimum 120V input. When
the voltage is higher than 120V, your equipment is subject to extra electricity that can
overheat or damage your equipment. When
the voltage is lower than 120V, your equipment’s power supply must work harder to
create more electrical current in order to
make up for the difference, creating a “tugof-war” in your power supply. This can
cause your equipment to malfunction or
sustain permanent damage.
Furman’s True RMS Voltage Regulation
is designed around an ultra-low noise
toroidal autoformer.
A microprocessor within the regulator monitors the
incoming RMS voltage with each cycle,
measuring the phase angle in time with
the advancing cycle. Most commercial
voltage regulators using multiple-tapped
transformers switch taps at uncontrolled
times. This creates voltage spikes and
clicks that can leak into audio. When a
voltage fluctuation requires correction,
Furman’s True RMS Voltage Regulation
advances a new tap with less stress
than other technologies and, in turn,
avoids distortion to the AC waveform.
Hysteresis in the circuitry avoids the
True RMS Voltage
Regulation is achieved
through the use of an
ultra-quiet, microprocessor controlled
autoformer with solidstate switching.
unnecessary switching back and forth
between the adjacent taps (or “chatter”)
found in many commercial voltage regulators. If necessary, Furman’s True RMS
Voltage Regulation technology can
switch taps as often as once each cycle
and do so with a shorter recovery time
than a commercial voltage regulator. In
addition, and unlike voltage regulators
that employ ferroresonant transformers,
Furman regulators are not sensitive to
small errors in line frequency, making
them ideal for use with generators. The
autoformer’s toroidal design assures
minimal leakage of stray magnetic fields.
www.furmanpower.com
7
120V PRO LINE PRODUCT CATALOG
Power Factor Technology
Furman’s Power Factor Technology was
designed to address problems with instrument amplifiers in various locations. A
common complaint of musicians is that
their equipment will sound great at one
club or venue, yet sound squashed and
lack definition at other locations. This lack
of consistency is typically due to resistance in the AC line.
Power Factor Technology provides
current-on-demand for instrument
amplifiers for consistent
equipment performance regardless
of local power quality
For example, at the location where the
amplifier rig sounded good, the amp was
connected to only 35 feet of AC line from
the power panel, causing a low resistance. At the locations where the amp
sounded squashed and lacked definition,
the AC outlets were 300 feet from the
power panel, resulting in a higher resistance, not supplying the amplifier with
the current it needed to reproduce the
signals accurately.
Furman’s Power Factor Technology has
a current reserve of 45 amps peak, so
when the power company cannot deliver
the current needed or if your AC line has a
high resistance, your amplifier will be able
to tap the current in the Power Factor’s
reserve. This means your amplifier will
always get the current needed to reproduce signals accurately and consistently,
no matter what venue or club or how close
or far away from the power panel your
amplifier is. In simple terms, Furman’s
Power Factor Technology keeps your
instrument amplifier’s tone consistent and
sounding its best at all times.
Jason Hook, Five Finger Death Punch
clear tone Technology
Available in Furman’s Power Factor models,
Clear Tone Technology works in unison
with Power Factor Technology and Linear
Filtering Technology to add an additional
layer of AC noise filtration specifically
engineered for instrument amplifiers. Clear
Tone Technology provides tuned filtering
circuits that unveil instrument tone,
harmonics, and clarity, resulting in a fuller
sound and improved dynamic response.
Power Sequencing
Power Sequencing is useful whenever
various kinds of equipment must be powered
up or down in groups, rather than all simultaneously. In audio systems, sequenced
powering is often necessary to allow
turn-on transients from low level amplifiers and processors to settle down before
8
any power amps are turned on, because
simultaneous powering would result in a
loud, annoying, and potentially destructive
“pop” reaching the speakers. And in any
large system whose components present
an inductive load to the AC line (including
electric motors, power supplies, and power
amplifiers of all kinds), sequenced powering
can avoid excessive inrush currents that can
cause circuit breakers to trip even though
the steady-state currents are not excessive.
Power sequencing is particularly suited to
applications where large installations must
be switched by inexperienced personnel.
About furman
Symmetrically Balanced Power
To understand the incredible need for clean,
noise-free AC power, it’s important to note
that today’s sophisticated studio equipment features tremendous dynamic range.
Most of the signal content that defines high
resolution such as harmonics, instrument
timbre, high frequency extension, spatial
cues, and fast transient attacks in audio
are inherently low in signal level. When AC
noise is induced into recording and reproduction equipment, these all-important
low level signals are distorted or masked.
Once signals are masked there is no way to
retrieve the lost content.
For the most critical, low-noise applications, Furman’s Symmetrically Balanced
Power provides an invisible noise floor,
while completely breaking ground loops
without dismantling equipment or rewiring.
True symmetrically balanced power is
achieved by running the incoming AC line
into a one-to-one ratio isolation transformer with a precisely placed center tap
on the transformer’s output. The incoming
voltage (120V on the line terminal, 0V on
the neutral and ground) are split in perfect
halves on the secondary of the transformer.
The output line terminal now has 60V and
the neutral terminal has 60V when referenced to its new center tap ground (which
remains at 0V). What’s significant about
this is that the two 60V AC terminals are now
in opposite polarity, so the symmetrical AC
noise, or common mode fields, cancel. This
noise reduction is extraordinarily efficient
and linear across a huge frequency range.
The transformer has completely re-worked
your incoming AC and the result is perfectly
clean power devoid of the masking effects
of AC noise.
Furman’s Symmetrically Balanced
Power utilizes a 1:1 transformer
for noise-free output and
100% isolation from ground
Battery Backup
Battery Backup provides temporary power
when power is interrupted, allowing the
opportunity to save any data and shut down
equipment properly. Good candidates for
such battery backup in Pro A/V applications
are computers and external hard drives
in studios, DLP projectors, digital video
recorders, and digital mixing consoles.
Essentially, any component that holds critical data, has volatile memory, or needs
to run a shutdown procedure to power off
safely will benefit from battery backup.
© Pavel Losevsky - Fotolia.com
Compatible
BlueBolt™
Provides remote access to reboot components,
power equipment on or off, and monitor power
quality over the Internet from anywhere in the world.
www.furmanpower.com
9
120V PRO LINE PRODUCT CATALOG
CLASSIC SERIES POWER CONDITIONERS
An update to Furman’s popular Series II line, all Classic Series models provide advanced features such as SMP Surge Protection,
EVS Protection, Linear Filtering Technology, pull-out LED lights, and isolated rear panel outlet banks.
PL-8C 15A Advanced Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
9 Outlets
15A Rating
Diagnostic Lights
Wall Wart
Spacing
Isolated Outlet
Banks
Front Panel
Retractable
Lights
Rear Panel BNC
Connector for
Gooseneck Lamp
Front Panel
Retractable
Lights
Rear Panel BNC
Connector for
Gooseneck Lamp
LED Voltmeter
Front Panel
Retractable
Lights
Rear Panel BNC
Connector for
Gooseneck Lamp
Dual Voltage/
Current Meter
PL-PLUS C 15A Advanced Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
9 Outlets
15A Rating
Diagnostic Lights
Wall Wart
Spacing
Isolated Outlet
Banks
PL-PLUS DMC 15A Advanced Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
9 Outlets
15A Rating
Diagnostic Lights
Wall Wart
Spacing
Isolated Outlet
Banks
Rear Panel (All Models)
Classic Series (15A) Specifications: Maximum Output Current:15 Amps. Line Cord: 10 ft. captive, 14 AWG, with NEMA 15 plug. Lamps: Two multi-LED dimmable lamps.
Over Voltage Shutdown: 140 VAC typically. Spike Protection Mode: SMP, Line to neutral, zero ground leakage. Maximum Operating Voltage: 139V RMS. Let Through Voltage: 188Vpk (133V RMS).
Noise Attenuation (Transverse Mode):10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz. BNC Connector: 12VAC 500MA max (lamp not included). Dimensions: 1.75” H x 19” W x 7.5” D. Weight: 12 lbs.
Safety Agency: cTUVus. Warranty: Five Year.
10
CLASSIC SERIES POWER CONDITIONERS
CLASSIC SERIES POWER CONDITIONERS (pro models)
Furman’s Classic Series Pro Models provide additional features such as a higher current capacity (20A), USB front panel
chargers, and Secure Straps to lock large AC transformers (“wall warts”) in place.
PL-PRO C 20A Advanced Power Conditioner
SMP Advanced Linear Filtering
Surge Protection Technology
EVS Voltage
Protection
9 Outlets
20A Rating
Diagnostic Lights
USB Charger
Wall Wart
Spacing with
Secure Straps
Isolated Outlet
Banks
Front Panel
Retractable
Lights
Rear Panel BNC
Connector for
Gooseneck Lamp
LED Voltmeter
PL-PRO DMC 20A Advanced Power Conditioner
SMP Advanced Linear Filtering
Surge Protection Technology
EVS Voltage
Protection
9 Outlets
20A Rating
Diagnostic Lights
USB Charger
Wall Wart
Spacing with
Secure Straps
Isolated Outlet
Banks
Front Panel
Retractable
Lights
Rear Panel BNC
Connector for
Gooseneck Lamp
Dual Voltage/
Current Meter
Rear Panel (Both Models)
Classic Series (20A) Specifications: Maximum Output Current: 20 Amps. Line Cord: 10 ft. captive, 12 AWG, with 3-conductor Edison plug. USB Circuit: 500 mA@5VDC, USB-A Connector.
Lamps: Two multi-LED dimmable lamps. Over Voltage Shutdown: 140 VAC typically. Spike Protection Mode: SMP, Line to neutral, zero ground leakage. Maximum Operating Voltage: 139V RMS.
Let Through Voltage: 188Vpk (133V RMS). Noise Attenuation (Transverse Mode):10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz. BNC Connector: 12VAC 500MA max (lamp not included).
Dimensions: 1.75” H x 19” W x 7.5” D. Weight: 12 lbs. Safety Agency: cTUVus. Warranty: Five Year.
P-8 PRO C 20A Classic Series Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
9 Outlets
20A Rating
Diagnostic Lights
Wall Wart Spacing
with Secure Straps
Isolated Outlet
Banks
Rear Panel BNC Connector
for Gooseneck Lamp
P-8 PRO C Specifications: Current rating: 20 Amps. Operating Voltage: 90 to 140 VAC. Frequency: 50/60Hz. Over Voltage Shutdown: 140 VAC typically. Spike Protection Modes: Line to neutral, zero
ground leakage. Spike Clamping Voltage: 188 Vpk @ 3,000 Amps, (133 VAC RMS). Maximum Surge Current: 6,500 Amps. Noise Attenuation (transverse mode): 10 dB @ 10 kHz, 40 dB @ 100 kHz,
100 dB @ 10 MHz. Dimensions: ” D x 1.75” H, Weight: 11 lbs (5 kg). Power Consumption: 12 watts. Safety Agency Listings: CSA UL1449. Warranty: Five Year.
www.furmanpower.com
11
Merit Series Power Sequencer & Regulator / power conditioner
MERIT SERIES POWER CONDITIONER
Furman’s most affordable rackmount power conditioners provide nine total outlets, standard level surge suppression, standard
level EMI/RFI filtration, and a robust steel chassis.
M-8x² 15A Power Conditioner
Standard Level
Surge Protection
Standard Level
RFI/EMI Filtration
9 Outlets
15A Rating
Protection OK
Indicator
Wall Wart
Spacing
Protection OK
Indicator
Wall Wart
Spacing
Front Panel
Retractable Lights
Protection OK
Indicator
Wall Wart
Spacing
Front Panel
Retractable Lights
M-8Lx 15A Power Conditioner
Standard Level
Surge Protection
Standard Level
RFI/EMI Filtration
9 Outlets
15A Rating
M-8Dx 15A Power Conditioner
Standard Level
Surge Protection
Standard Level
RFI/EMI Filtration
9 Outlets
15A Rating
Digital
Voltmeter
Rear Panel (All Models)
Merit X Series Specifications: Maximum Output Current:15 Amps. Line Cord: 6 ft. captive, 14 AWG, with NEMA 15 plug. Lamps (M-8Lx/M-8Dx): Two 120V incandescent bulbs, 4 watts each.
Spike Protection Mode: Fused MOV, Line to neutral. Maximum Operating Voltage: 130V RMS. Noise Attenuation (Transverse Mode): 23dB (M-8x²) / 26 dB (M-8Lx/M-8Dx), 200Khz to 10 Mhz.
Dimensions: 1.75” H x 19” W x 3.75” D (M-8x2) / 1.75” H x 19” W x 7.5” D (M-8Lx/M-8Dx). Weight: 4 lbs (M-8x2) / 6 lbs (M-8Lx/M-8Dx). Safety Agency: cTUVus. Warranty: Three Year.
12
POWER STATIONS POWER CONDITIONERS
POWER STATION POWER CONDITIONERS
Furman’s Power Stations provide advanced protection and filtration in a convenient “surge strip” form factor, ideal for floor
mounting or attaching to the side of an equipment rack. Coax and telco connections provide signal and data line protection.
PST-2+6 15A Plastic Chassis Power Conditioning Strip
Standard Level Standard Level
Surge Protection RFI/EMI Filtration
8 Outlets
15A Rating
Diagnostic Lights
Wall Wart
Spacing
Broadband Data/
Signal Line
Protection
PST 2+6 Specifications: Maximum Output Current:15 Amps. Line Cord: 6 ft. captive, 14 AWG, with NEMA 15 plug.
Spike Protection Mode: Fused MOV, Line to neutral. Noise Attenuation (Transverse Mode): >40 dB, 150kHz-100 MHz.
TVSS Modules: 1 pair. Coax TVSS Modules: 1 pair (bidirectional, less than .1dB insertion loss).
Dimensions: 1.7” H x 11.75” W x 5” D Weight: 3 lbs. Safety Agency: C-UL. Warranty: One Year.
PST-6 15A Aluminum Chassis Power Conditioning Strip
Standard Level Standard Level
Surge Protection RFI/EMI Filtration
6 Outlets
15A Rating
Diagnostic Lights
Wall Wart
Spacing
Broadband Data/
Signal Line
Protection
PST 6 Specifications: Maximum Output Current:15 Amps. Line Cord: 6 ft. captive, 14 AWG, with NEMA 15 plug. Spike Protection Mode: Fused MOV, Line to neutral. Noise Attenuation (Transverse
Mode): >40 dB, 150kHz-100 MHz TVSS Modules: 1 pair. Coax TVSS Modules: 1 pair (bidirectional, less than .1dB insertion loss). Dimensions: 2.75” H x 3.75” W x 13.5” D. Weight: 3 lbs.
Safety Agency: C-UL. Warranty: One Year.
PST-8 15A Aluminum Chassis Advanced Power Conditioning Strip
SMP Advanced
Surge Protection
Linear Filtering
Technology
PST 8 Specifications: Maximum Output Current:15 Amps. Line Cord: 6 ft. captive, 14 AWG, with NEMA 15 plug. Spike Protection Mode: SMP, Line
to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 139V RMS. Let Through Voltage (@ 125 Amps, 8/20uS waveform):
188Vpk (133V RMS). Noise Attenuation (Transverse Mode): 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz. Telco TVSS Modules: 1 pair.
Coax TVSS Modules: 1 pair (bidirectional, less than .1dB insertion loss). Dimensions: 2.75” H x 3.75” W x 17.75” D. Weight: 3 lbs.
Safety Agency: C-UL. Warranty: Three Year.
EVS Voltage
Protection
Diagnostic Lights
8 Outlets
15A Rating
Wall Wart
Spacing
Broadband Data/
Signal Line
Protection
PST-8D 15A Aluminum Chassis Advanced Power Conditioning Strip
With Isolated Outlet Banks
SMP Advanced
Surge Protection
PST 8D Specifications: Maximum Output Current:15 Amps. Line Cord: 6 ft. captive, 14 AWG, with NEMA 15 plug.
Spike Protection Mode: SMP, Line to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 139V RMS.
Let Through Voltage (@ 125 Amps, 8/20uS waveform): 188Vpk (133V RMS). Noise Attenuation (Transverse Mode): 10 dB @
10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz. Telco TVSS Modules: 1 pair. Coax TVSS Modules: 2 pairs (bidirectional, less than .1dB
insertion loss). Dimensions: 2.75” H x 3.75” W x 18.5” D. Weight: 5 lbs. Safety Agency: C-UL. Warranty: Three Year.
Linear Filtering
Technology
Diagnostic Lights
EVS Voltage
Protection
8 Outlets
15A Rating
Wall Wart
Spacing
Isolated Outlet
Banks
Broadband Data/
Signal Line
Protection
www.furmanpower.com
13
120V PRO LINE PRODUCT CATALOG
Contractor Series – Power Sequencers
WHY CHOOSE POWER SEQUENCING?
Many pro audio/video installations need audio power amplifiers to
activate last. Our solution is the AC power sequencer. The power
sequencer provides AC power to outlet groups one at a time, thus
allowing equipment to be powered up and down in an orderly
fashion by first providing power to signal processing equipment
and then providing power to the amplifiers. When shutting down
the A/V system, a sequencer will turn off the system in the reverse
order, hence the amps will be turned off first, and then the signal
processing equipment will be turned off last.
This is necessary because, as most sound reinforcement professionals know, the majority of equipment damage occurs when
devices are either powered up or powered down. Power
sequencing allows equipment to power up in sequence and prevent
the dreaded “pop”. The “pop” is a speaker pop associated with
on off switching of signal processing equipment while the audio
power amplifiers are energized. If the signal processing “pop” is
amplified sufficiently, the result can damage speaker components.
Because it prevents this unwanted, and often costly, circumstance,
AC power sequencing is extremely valuable.
Furman Contractor Series equipment also allow sound reinforcement equipment to be remotely powered up or powered down over
a large distance, not just in the immediate vicinity of the operator.
Additionally, Maintained or Momentary mode contact switching
allows the user great flexibility when controlling the unit from a
remote location. A remotely mounted switch or control pad can
be used to sequence equipment on or off. In addition, Furman
Contractor Series remote functions can be initiated across a
room, on-site, or off-site with RS-232 protocol or our cloud-based
BlueBOLT technology.
CN-1800s Contractor Series Smart Sequencer
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
9 Outlets
20A Rating
Diagnostic Lights
Compatible
Isolated Outlet
Banks
Power
Sequencing
Furman’s SmartSequencers combines AC power distribution, protection, filtration, and sequential system power on/off in a 1RU,
120VAC, rack-mount unit.
CN-1800S Specifications: AC Voltage Input Range: 90-139VAC, 50/60Hz. Maximum AC Current Rating: CN-1800S: 15 amps (Thermal breaker). AC Cord: 3/14AWG, 10 feet, black, fixed, NEMA 5-15P plug.
AC Receptacles: Convenience Outlet (Front Panel) 1 Unswitched NEMA 5-15R. Rear Panel Outlets: 2 Unswitched NEMA 5 15R’s (1 duplex), 6 Sequenced NEMA 5-15R’s (3 duplexes each controlled by separate
relay). AC Surge Protection: SMP. Spike Protection Mode: Line to neutral, zero ground leakage. Spike Clamping Voltage: 188VAC peak @ 6,000 volts/3,000 amps. Response Time: 1 nanosecond.
Maximum Surge Current: 6,500 Amps. AC Undervoltage Protection: EVS, 77VAC+/-3VAC. AC Overvoltage Protection: EVS, 145VAC+/-5VAC. Manual and Auto-reset (configurable).
AC Filtering: LiFT. Noise Attenuation: Linear, 10dB @10KHz, 40dB@100KHz, 50dB@500KHz. Operating Temperature Range: 5C (40F) to 40C (105F) degrees. Humidity Range: <90% rH (Relative
Humidity). Power Consumption (No Load): 10 Watts. Safety Agency: NRTL-C. RoHS Compliant: Yes. Warranty: 15 Years.
14
contractor series - power sequencers
Contractor Series – Power Sequencers
CN-2400s Contractor Series SmartSequencer
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
9 Outlets
20A Rating
Diagnostic Lights
Isolated Outlet
Banks
Compatible
Power
Sequencing
CN-2400S Specifications: AC Voltage Input Range: 90-139VAC, 50/60Hz. Maximum AC Current Rating: 20 amps (Thermal breaker). AC Cord: 3/12 AWG, 10 feet, black, fixed, NEMA 5-20P plug.
AC Receptacles: Convenience Outlet (Front Panel) 1 Unswitched NEMA 5-15R. Rear Panel Outlets: 2 Unswitched NEMA 5 20R’s (1 duplex), 6 Sequenced NEMA 5-20R’s (3 duplexes each controlled by separate
relay). AC Surge Protection: SMP. Spike Protection Mode: Line to neutral, zero ground leakage. Spike Clamping Voltage: 188VAC peak @ 6,000 volts/3,000 amps. Response Time: 1 nanosecond.
Maximum Surge Current: 6,500 Amps. AC Undervoltage Protection: EVS, 77VAC+/-3VAC. AC Overvoltage Protection: EVS, 145VAC+/-5VAC. Manual and Auto-reset (configurable).
AC Filtering: LiFT. Noise Attenuation: Linear, 10dB @10KHz, 40dB@100KHz, 50dB@500KHz. Operating Temperature Range: 5C (40F) to 40C (105F) degrees. Humidity Range: <90% rH (Relative
Humidity). Power Consumption (No Load): 10 Watts. Safety Agency: NRTL-C. RoHS Compliant: Yes. Warranty: 15 Years.
CN-15mp
Contractor Series MiniPort
CN-20mp
Contractor Series MiniPort
(shown without Phoenix-type
connectors and security cover)
(shown with Phoenix-type
connectors and security cover)
CN-15MP Specifications: AC Voltage Input Range: 90-139VAC, 50/60Hz. Maximum AC Current Rating: CN-15MP: 15 Amps (Thermal breaker). CN-20MP: 20 Amps. AC Cord: CN-15MP: 3/14AWG, 10 feet,
black, fixed, NEMA 5-15P plug. CN-20MP: 3/12 AWG, 10 feet, black, fixed, NEMA 5-20P plug. AC Receptacles: CN-15MP: 2 NEMA 5-15R’s (1 duplex). CN-20MP: 2 NEMA 5-20R’s (1 duplex). AC Undervoltage
Protection: EVS, 77VAC+/-3VAC. AC Overvoltage Protection: EVS, 140VAC+/-5VAC. EVS Enable/Disable (configurable). Operating Temperature Range: 5C (40F) to 40C (105F) degrees.
Humidity Range: <90% rH (Relative Humidity). Power Consumption (No Load): 10 Watts. Safety Agency: CSA. RoHS Compliant: Yes.
BB-RS232
Contractor Series BlueBOLT Adapter
The BB-RS232 Adaptor provides Ethernet connectivity to BlueBOLTsupported products that are otherwise only capable of RS-232
communication. Once the Adaptor is connected between the BlueBOLT
supported product (via RS-232) and the site’s Local Area Network (via
Ethernet), the product can communicate with our BlueBOLT servers or
a local control system.
RS-232 (DTE pinout, DE-9)
MAC Address and Challenge
Key Numbers (Labels on back
of BB-RS232) and in box.
www.furmanpower.com
15
120V PRO LINE PRODUCT CATALOG
MERIT SERIES POWER SEQUENCER & REGULATOR
The Merit M-8s Power Sequencer is the perfect low-cost AC power solution for any rack mount system. Install an M-8s in to the
top slot of your rack, and the six delayed outlets in the rear panel will power up sequentially and protect all your equipment up to
a 15-amp load.
M-8S 15A Power Sequencer
Back Panel Delayed 1, 2 and 3 Outlet Banks
Indicator Lights
Unswitched Outlets
10 ft. Captive Power Cord with
NEMA 5-15 Plug
Power Sequencing
Standard Level
Surge Protection
Front Panel
Convenience Outlet
Power
Indicator
Sequence ON/OFF
Switch
15A Circuit Breaker
3 Delayed Outlet Banks
Unswitched Outlets Power
Indicator LED
Standard Level
RFI/EMI Filtration
Protection OK
Indicator
Delay Adjustment
All Outlets Filtered and Protected
9 Outlets
15A Rating
Protection OK
Indicator
Remote Interface
Wall Wart
Spacing
M-8S Specifications: Maximum Output Current:15 Amps. Line Cord: 10 ft. captive, 14 AWG, with NEMA 5-15 plug. Spike Protection Mode: Fused MOV, Line to neutral.
Maximum Operating Voltage: 130V RMS. Noise Attenuation: >23dB, 100Khz to 1 Mhz. Outlet banks (2 outlets each): 1 unswitched (always on), 3 delay banks with adjustable delay.
Dimensions: 1.75” H x 19” W x 6.5” D. Weight: 5.3 lbs Safety Agency: cCSAus. Warranty: Three Year.
M-8x AR 15A Merit Series Voltage Regulator
The Merit M-8x AR voltage regulator ensures a stable 120V ( 5V) from any voltage input between 97V and 141V
True RMS
Voltage Regulation
Standard Level
Surge Protection
Standard Level
RFI/EMI Filtration
9 Outlets
15A Rating
Protection OK
Indicator
Wall Wart
Spacing
LED Voltmeter
M-8X AR Specifications: Maximum Output Current:15 Amps. Line Cord: 10 ft. captive, 14 AWG, with NEMA 5-15 plug. Spike Protection Mode: Fused MOV, Line to neutral. Maximum Operating
Voltage: 130V RMS. Regulation Capture Range: 97VAC to 141VAC Output Voltage: 120VAC 5V Noise Attenuation: -16dB @ 10KHz, -33dB @ 100 kHz, -48dB @ 400KHz.
Dimensions: 1.75” H x 19” W x 11” D. Weight: 5.75 lbs Safety Agency: cCSAus. Warranty: Three Year.
16
MERIT SERIES POWER SEQUENCER & REGULATOR / POWER CONDITIONER
POWER FACTOR POWER CONDITIONERS
Furman’s Power Factor Power Conditioners are the only power management solutions specifically engineered to extract
optimal performance from instrument amplifiers. Furman’s unique Power Factor Technology gives amps the current they
need when they need it.
P-1800 PF R 15A Advanced Power Conditioner with Power Factor Technology
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
Power Factor
Technology
Clear Tone
Technology
9 Outlets
15A Rating
P-1800 PF R Specifications: Maximum Output Current: 15 Amps. Line Cord: 10 ft. captive, 14 AWG, with 3-conductor Edison plug.
USB Circuit: 500 mA@5VDC, USB-A Connector. Spike Protection Mode: SMP, Line to neutral, zero ground leakage. Maximum Operating
Voltage: 139V RMS. Let Through Voltage: 188Vpk (133V RMS). Noise Attenuation (Transverse Mode): 30 dB @ 2 kHz, 40 dB @ 10 kHz,
50 dB @ 20 kHz, 70 dB @ 100 kHz. Reactive Power: 460 VA. BNC Connector: 12VAC 500MA max (lamp not included).
Dimensions: 1.75” H x 19” W x 10.5” D. Weight: 13 lbs. Safety Agency: cETLus. Warranty: Five Year.
Diagnostic
Lights
USB Charger
Wall Wart Spacing
with Secure Straps
Isolated Outlet
Banks
Digital
Voltmeter
Rear Panel BNC
Connector for
Gooseneck Lamp
The Furman P-1800 PF R gives my gear
the juice it needs to sound its best.
With Furman, I know I’m protected
from power problems and I can get
the tone I expect at every show.
– Steve Vai
www.furmanpower.com
17
120V PRO LINE PRODUCT CATALOG
ADVANCED VOLTAGE REGULATORS / POWER CONDITIONERS
Furman’s Advanced Voltage Regulators/Power Conditioners provide consistent 120V (±5V) output to correct unstable voltage while also
offering all of the advanced protection and noise filtering benefits of Furman’s power conditioning technologies.
P-1800 AR 15A Advanced Voltage Regulator/Power Conditioner
SMP Advanced Linear Filtering
Surge Protection Technology
EVS Voltage
Protection
True RMS Voltage
Regulation
9 Outlets
15A Rating
Diagnostic Lights
USB Charger
Wall Wart Spacing Isolated Outlet
with Secure Straps
Banks
Dual Voltage/
Current Meter
Rear Panel BNC
Connector for
Gooseneck Lamp
P-1800 AR Specifications: Maximum Output Current: 15 Amps. In Regulation Range: 97 to 137 VAC. Output Voltage: 120V 5V Line Cord: 10 ft. captive, 12 AWG, with 3-conductor Edison plug.
USB Circuit: 500 mA@5VDC, USB-A Connector. Spike Protection Mode: SMP, Line to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 139V RMS. Let Through Voltage
(@ 125 Amps, 8/20uS waveform): 188Vpk (133V RMS). Noise Attenuation (Transverse Mode):10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz. BNC Connector: 12VAC 500MA max (lamp not
included). Dimensions: 19” W x 12.0” D x 1.745” H. Weight: 15 lbs. Safety Agency: cETLus. Warranty: Five Year.
P-2400 AR 20A Advanced Voltage Regulator/Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
True RMS Voltage
Regulation
14 Outlets
20A Rating
Diagnostic Lights
USB Charger
Isolated Outlet
Banks
Dual Voltage/
Current Meter
P-2400 AR Specifications: Maximum Output Current: 20 Amps. In Regulation Range: 97 to 137 VAC. Output Voltage: 120V 5V Line Cord: 10 ft. captive, 12 AWG, with NEMA 20 plug.
Spike Protection Mode: SMP, Line to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 139V RMS. Let Through Voltage (@ 125 Amps, 8/20uS waveform): 188Vpk (133V RMS).
Noise Attenuation (Transverse Mode): 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz. Dimensions: 3.50” H x 19” W x 12” D. Weight: 39 lbs. Safety Agency: cETLus Warranty: Five Year.
18
ADVANCED VOLTAGE REGULATORS / POWER CONDITIONERS
WORLD TOUR VOLTAGE REGULATOR / POWER CONDITIONER
Ideal for installation in equipment racks that travel to different regions around the globe, the one-of-a-kind Furman P-3600 AR G
provides stable 120V ( 5%) output from any voltage source between 88V-134V and 170V-265V.
P-3600 AR G 30A Global Voltage Regulator
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
Global Voltage
Regulation
11 Outlets
30A Rating
Diagnostic Lights
Digital Voltmeter
Digital Ammeter
P-3600 AR G Specifications: Maximum Output Current: 30A. In Regulation Range (Low): 88-134 VAC @50/60Hz. In Regulation
Range (High): 170-265 VAC @ 50/60Hz. Output Voltage: 120V 5V Line Cord: L-14 Male Twistlock. Spike Protection Mode: SMP,
Line to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 145 V Nominal (120V Input), 275 VAC Nominal
(240V Input). Let Through Voltage (@ 125 Amps, 8/20uS waveform): 188Vpk (133V RMS). Noise Attenuation: 10 dB @ 10kHz,
40 dB @ 100 kHz, 50 dB @ 500kHz. Dimensions: 19” W x 12” D x 5.25” H. Weight: 50 lbs. Safety Agency: cTUVus. Warranty: Five Year.
The Furman P-3600 AR G is a valuable and essential asset
in my touring rig. Built like a tank it keeps the voltage supply
to my rig stable and consistent.
– Edward Van Halen
www.furmanpower.com
19
VOLTAGE REGULATORS / BALANCED POWER CONDITIONERS
BALANCED POWER CONDITIONER
Designed for the most critical low-noise applications, Furman’s flagship P-2400 IT provides pristine balanced power to
connected equipment with 100% isolation from the power grid.
P-2400 IT 20A Balanced Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
Symmetrically
Balanced Power
14 Outlets
20A Rating
Diagnostic Lights
USB Charger
Isolated Outlet
Banks
Dual Voltage/
Current Meter
P-2400 IT Specifications: Maximum Output Current: 20 Amps. Line Cord: 10 ft. captive, 12 AWG, withNEMA 5-20 plug.
Spike Protection Mode: SMP, Line to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 139V RMS.
Let Through Voltage (@ 125 Amps, 8/20uS waveform): 188Vpk (133V RMS). Noise Attenuation (Transverse Mode):10
dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz. Noise Attenuation (Common Mode): >80 dB @ 20 kHz, >40 dB @ 20 kHz-1
MHz. Dimensions: 5.25” H x 19” W x 14” D. Weight: 90 lbs. Safety Agency: cETLus Warranty: Five Year.
Furman’s 90 lb. isolation transformer works much like balanced audio... at a higher voltage. The incoming
AC is split from 120V on the line to 60V on the line and neutral when referenced to the new 0V ground.
Since these voltage paths are in opposite polarity, all noise on the incoming AC line is cancelled, resulting
in a substantially lower noise floor and allowing harmonics and overtones in audio content to shine
through without the masking effects of AC noise. Further, Furman’s P-2400 IT is the only balanced power
conditioner that provides 100% isolation from line, neutral and ground, providing your equipment with
total isolation from the power grid.
20
COMPACT POWER CONDITIONER / IN-WALL
About
SOLUTIONS
furman
COMPACT POWER CONDITIONER
Ideal for flat panel televisions, video projectors, or anywhere advanced power conditioning is needed for components away from
the main equipment rack, the AC-215A provides advanced protection and filtration in a compact, 1.75” H x 5”W x 8.5”D chassis.
AC-215A 10A Compact Advanced Power Conditioner
SMP Advanced
Surge Protection
Linear Filtering
Technology
Auto-Reset EVS
Voltage Protection
2 Outlets
10A Rating
Diagnostic Lights
AC-215A Specifications: Maximum Output Current:10 Amps. Line Cord: 6 ft. removable, 14 AWG, with NEMA 15 plug.
Spike Protection Mode: SMP, line to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 139V RMS.
Let Through Voltage (@ 125 Amps, 8/20uS waveform): 188Vpk (133V RMS). Noise Attenuation (Transverse Mode):
10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz. Dimensions: 1.75” H x 5” W x 8.5” D. Weight: 3 lbs.
Safety Agency: cCSAus. Warranty: Three Year.
IN-WALL SOLUTIONS
The AC-215A’s
compact size
makes it ideal
for mounting
to the back of
flat-panel displays.
Innovative in-wall solutions provide discreet, in-wall surge protection and signal line management in a standard 2-gang form
factor – ideal for flat panel screens and projectors.
By Panamax~Furman
MIW-POWER-PRO-PFP In-Wall Surge/Over-Voltage Protection System
MIW-POWER-PRO-PFP delivers surge and voltage protected AC power to flat panel displays, ceiling mounted
video projectors and powered sub-woofers. Discreetly hides behind electronic equipment for a neat, clean, code
compliant and professional installation.
• Provides surge protection and Extreme Voltage Shutdown • Ultra-thin profile can allow equipment to hang less
than one inch from the wall • Standard Level EMI/RFI noise filtration • CSA Certified for code compliant installations
• 3 Year Product Warranty
MIW-POWER-PRO-PFP Specifications: AC Outlets, Total: 2. Line Voltage: 120V, 50/60Hz. Total Current Capacity: 15A. UL 1449 2nd Ed. Suppressed Voltage (@500A): 330V. Protection Modes: L-N,
L-G, N-G. Energy Dissipation: 546 Joules. Peak Impulse Current: 32,500 Amps. Maximum Continuous Operating Voltage: 133V RMS. Catastrophic Surge Circuit: Yes. Thermal Fusing: Yes.
Dimensions (Installed): 4.75” H x 4.75” W x 25” D. Weight: 2 lbs. Safety Agency: cCSAus. Warranty: Three Year.
By Panamax~Furman
MIW-SURGE-1G In-Wall Surge Protection System
Two AC receptacles provide surge protection. Fits most standard single gang plastic or metal boxes.
• DECORA® Faceplate Interface. This piece surrounds the receptacles and fits within a standard cover plates
DECORA cutout. • Uses standard wiring device screw-hole. • Both outlets with Protect or DisconnectTM Circuitry.
• Bi-color Indicator LED. Green = Power On Red = Line Fault • 3 Year Product Warranty
MIW-SURGE-1G Specifications: AC Outlets, Total: 2. Line Voltage: 120V, 50/60Hz. Total Current Capacity: 15A. UL 1449 2nd Ed. Suppressed
Voltage (@500A): 330V. UL 1449 3rd Ed. Voltage Protection: (@3000A): 400V. Protection Modes: L-N, L-G, N-G. Energy Dissipation: 1350 Joules.
Dimensions : 4.25” H x 1.375” W x 2.25” D. Weight: 2 lbs. Safety Agency: cCSAus. Warranty: Three Year.
DECORA is a registered trademark of Leviton Manufacturing Company
www.furmanpower.com
21
POWER DISTRIBUTION / CONTROLLERS / POWER RELAYS
POWER DISTRIBUTION
Furman’s Power Distribution models provide convenient rackmount solutions for delivering AC power to multiple circuits
when a hard-wired, built-in system is not available.
ASD-120 2.0 120 Amp Sequenced Power Distro
New Version!
Optimized for easier
installation and operation
ASD-120 2.0 Specifications: Input Current: 120 amps maximum. Input Voltage: Selectable between 120V single phase/240V single phase/208V 3-phase. Output: Six identical 20 amp, 120V circuits.
Delay Interval: 0.5 seconds to 7 minutes per step, adjustable with front panel DIP switches and potentiometer. Dimensions: 3.5” H x 19” W x 10” D. Weight: 16 lbs. Safety Agency: cETLus
Warranty: Three year.
POWER relay
Furman’s PS-REL works in tandem with Furman’s Power Sequencers,
Controllers and Distros to provide modular solutions for any power
sequencing scenario.
PS-REL
Power Relay Accessory
The PS-REL AC Relay provides an alternate
way of closing switch contacts. It is a relay
that detects the presence of AC power and,
in response, closes relay contacts that are
wired to a terminal strip. A PS-REL is useful
in determining when a certain outlet has come
on after a sequenced delay, and to extend that
outlet’s capacity.
POWER relay control panels
Furman’s Power Relay Control Panels allow remote operation
of Furman’s Power Sequencers, Controllers, Distros and Relays.
RS-2 Remote System Control Panel
The RS-2 Remote System Control Panel provides
a simple way to control AC equipment from
one or more locations, using only inexpensive
low-voltage wiring. The RS-2 can be operated via
a maintained contact ”Start ON/OFF Sequence”
keyswitch or a momentary push button. The rear
of the panel has a circuit board with a full size
barrier strip for field wiring connections.
22
BALANCED POWER / BATTERY BACKUP
BATTERY BACKUP (UPS)
Furman’s UPS solutions provide power backup in the event of a blackout and a full feature set designed
specifically for A/V professionals.
F-1000 UPS 1000VA Simulated Sine Wave Battery Backup
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
Battery Backup
(Simulated Sine Wave)
Standard Voltage
Regulation
8 Outlets
12A Rating
Diagnostic Lights
IR Blaster
Open Source
Programmability
Critical Load
Outlet Bank
Power Control
Software
F1000-UPS Specifications: Maximum Output Current: 12 Amps. Battery Output: 120V ±5V, Simulated Sine Wave. Battery Capacity: 1000VA, 600W @ 0.6pf. In Regulation Range: 85 to 137 VAC.
Line Cord: 10 ft. captive, 14 AWG, with 3-conductor Edison plug. Spike Protection Mode: SMP, Line to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 139V RMS.
Let Through Voltage (@ 125 Amps, 8/20uS waveform): 188Vpk (133V RMS). Noise Attenuation (Transverse Mode):10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz.
Dimensions (with rack ears): 3.5” H x 19” W x 13” D. Weight: 36 lbs. Safety Agency: cULus. Warranty: Three Year (product), Two Year (Battery).
F1500-UPS 1500VA True Sine Wave Battery Backup
SMP Advanced
Surge Protection
Linear Filtering
Technology
EVS Voltage
Protection
Battery Backup
(True Sine Wave)
Standard Voltage
Regulation
8 Outlets
15A Rating
Compatible
Diagnostic Lights
IR Blaster
Open Source
Programmability
Critical Load
Outlet Bank
Power Control
Software
BlueBOLTTM
Compatible
* with addition of BlueBOLT-CV1 card
(sold separately)
F1500-UPS Specifications: Maximum Output Current: 12 Amps. Battery Output: 120V ±5%, True Sine Wave. Battery Capacity: 1500VA, 900W @ 0.6pf. In Regulation Range: 85 to 137 VAC.
Line Cord: 10 ft. captive, 14 AWG, with 3-conductor Edison plug. Spike Protection Mode: SMP, Line to neutral, zero ground leakage. Maximum Continuous Operating Voltage: 139V RMS.
Let Through Voltage (@ 125 Amps, 8/20uS waveform): 188Vpk (133V RMS). Noise Attenuation (Transverse Mode): 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz.
Dimensions (with rack ears): 3.5” H x 17” W x 19.2” D. Weight: 72 lbs. Safety Agency: cULus. Warranty: Three Year (product), Two Year (Battery).
www.furmanpower.com
23
BATTERY BACKUP (EXTRAS)
Case Study:
F1500-UPS
O.co Coliseum
AV systems designer and integrator
Diversified Systems installed a
new Grass Valley slow-mo video playback system, consisting of a Grass
Valley ® Dyno slow-motion controller
and Summit video server, replacing
an older Grass Valley Profile slowmotion system at the MLB’s Oakland
Athletics’ 35,000-plus-seat O.co
Coliseum, which it shares with the
NFL’s Oakland Raiders. As part of this
system upgrade, a Furman F1500-UPS
uninterruptible power supply and
battery backup/power conditioner
was included, to protect the rack
containing the Summit server.
One day in mid July, a power surge due
to an electrical storm hit the control
room racks overnight, taking several
of them offline – except for the
rack holding the Summit slow-motion
server, which never even blinked
during the power surge.
“The (video) switcher and the router
were knocked off line briefly, but the
Furman F1500-UPS protected the
server, exactly as it was designed and
intended to do,” says Mark Sackett,
project manager and system engineer.
“Surge protection and power conditioning seem like very small parts of a
complex system like a stadium’s slowmotion video, but if there comes a time
when you really need it, it’s suddenly
the most important component in the
rack. We were very happy we had a
Furman unit in there.
It really made the difference.”
24
BlueBOLT-CV1 Online Remote Power Management
(For use with F1500-UPS)
Provides secure, hosted IP system control and monitoring for the MB1500
as well as additional BlueBOLT® compatible products from Furman/Panamax
Features: • Control for individual outlet banks featuring power, trigger and delay settings • Auto rebooting for connected network devices
• Remote diagnostics: check unit status and incoming line voltages • Easy, plug-in installation
• Email alerts for over and under-voltages help you anticipate or prevent service calls
BATT1500-EXT (For use with F1500-UPS)
Extend Runtime with External Battery Pack Component for F1500-UPS
up to 100 minutes when used in combination with F1500-UPS.
One BATT1500-EXT may be used at a time.
Run Times
Extended Run Time with F1500*
Half Load...........................................100 Min.
Full Load .............................................45 Min.
BlueBOLT Network Management
BlueBOLT™ Remote Power Management
Commercial Integration Application Guide
What Is BlueBOLT?
BlueBOLT is a free, cloud-based platform
for control and monitoring of Panamax
and Furman power management products. BlueBOLT can be used in integrated
electronics systems to drastically reduce
service calls by remotely rebooting problem
components, send alerts regarding onsite
system issues, manage energy use, monitor
network connectivity, and much more.
Applications:
Retail
Restaurants/Bars
House of Worship
Medical Offices
Fitness Centers
Education
Dance Clubs
Property Management
Research/Labs
Corporate Meeting Rooms
Auditoriums
Hotels/Hospitality
www.furmanpower.com
25
120V PRO LINE PRODUCT CATALOG
What can you do
with BlueBOLT?
Power-cycle A/V equipment remotely
A valuable technology for System
Support Providers, reducing onsite
service calls by as much as 80%.
Automatic alerts instantly warn you
of power issues, like power outages
Know the moment it happens so
you can act.
Scheduled power conservation
Power off unused equipment
when not needed to save money
and equipment lifespan.
Verify network connections
Ping networked devices and
build in corrective actions to
restore networks.
BlueBOLT will allow you to control
power to your equipment
from your computer, tablet
or smartphone.
26
It’s as easy as:
1. Choose from the variety of
BlueBOLT enabled hardware
devices (page 24-28).
2. Create your free BlueBOLT
account at www.mybluebolt.com.
3. Connect hardware to the internet.
4. Add hardware to a location you
create for the system you want to
monitor and control.
5. Plug in your equipment and you’re
good to go!
BlueBOLT Cloud
Control GUI
BlueBOLT’s cloud-based communications
provides an incredibly easy setup procedure - simply plug your BlueBOLT-enabled
power management component into the
wall, connect it to a standard Ethernet cable
with an active Internet connection, and plug
in your electronic components. BlueBOLT
will automatically detect your device as
active and you can immediately register it
and begin monitoring and control from your
computer, tablet or smartphone: no static
IP addresses or port forwarding needed.
BlueBOLT Network Management / Panamax Pro
Panamax Pro
Designed for the needs of professionally installed integrated electronic systems,
Panamax Pro products from Furmans sister company, Panamax, deliver power
protection and filtering along with BlueBOLT cloud-based systems management
for remote power, energy, and network monitoring and control.
Enabled
M4000-Pro 15 Amp BlueBOLT Enabled
Linear Filtering
Technology
Automatic Voltage
Monitoring
8 Outlets
15A Rating
15A Rating
Diagnostic Lights
USB Charger
M4000-PRO Specifications: Maximum Output Current: 15 Amps. Line Cord: 8 ft. removable, 14 AWG, with 3-conductor Edison plug. Spike Protection Mode: Protect-Or-Disconnect.
Maximum Operating Voltage: 134V RMS. Let Through Voltage: 200Vpk. Noise Attenuation (Transverse Mode): 18.7 dB @ 10 kHz, 50.5 dB @ 100 kHz, 43.9 dB @ 1 MHz.
Dimensions: 1.75” H x 17” W (19” W w/ rack ears, included) x 13” D. Weight: 10.6 lbs. Safety Agency: cETLus. Warranty: Three Year.
power conditioner
M4315-Pro 15 Amp BlueBOLT Enabled
also available:
Enabled
M4320-PRO 20 Amp BlueBOLT Enabled
Linear Filtering
Technology
Automatic Voltage
Monitoring
9 Outlets
15A Rating
Diagnostic Lights
Isolated Outlet
Banks
Dual Voltage/
Current Meter
M4315-PRO Specifications: Maximum Output Current: 15 Amps. Line Cord: 10 ft. removable, 14 AWG, with 3-conductor Edison plug. Spike Protection Mode: Protect-Or-Disconnect.
Maximum Operating Voltage: 134V RMS. Let Through Voltage: 200Vpk. Noise Attenuation (Transverse Mode): Banks 1,2,3: 76dB 5kHz-250kHz, Bank 4 (High Current Outlets): 46dB, 250khZ-1Mhz.
Dimensions: 1.75” H x 17” W (19” W w/ rack ears, included) x 12.25” D. Weight: 12 lbs. Safety Agency: cETLus. Warranty: Three Year.
www.furmanpower.com
27
BlueBOLT Network Management / Panamax Pro
Panamax Pro
VT4315-PRO BlueBOLT Enabled Vertical Rack
Power Conditioner with 12 AC Outlets
•
•
•
•
•
•
•
BlueBOLT® enabled for remote control and monitoring
12 protected and filtered outlets in 8 controllable outlet banks
Outlets widely spaced to accommodate bulky “wall warts”
4K ready, high-bandwidth coaxial protection
Gigabit (10/100/1000) Ethernet protection
12V trigger
Indicator lights for Voltage, Power,
Enabled
Protection OK, and BlueBOLT Connectivity
• Mounting brackets (included) provide flexible mounting options
SM3-Pro
15 Amp BlueBOLT
Enabled Compact
Power Conditioner
Enabled
Linear Filtering
Technology
EVS Voltage
Protection
Automatic Voltage
Monitoring
Linear Filtering
Technology
Automatic Voltage
Monitoring
3 Outlets
15A Rating
Diagnostic Lights
Isolated Outlet
Banks
12 Outlets
15A Rating
Diagnostic Lights
Isolated Outlet
Banks
SM3-PRO Specifications: Maximum Output Current: 15 Amps.
Line Cord: 3 ft. removable, 14 AWG, with 3-conductor Edison plug.
Spike Protection Mode: Protect-Or-Disconnect. Maximum
Operating Voltage: 134V RMS. Let Through Voltage: 200Vpk.
Noise Attenuation (Transverse Mode): Banks 1,2,3: 15.9 dB @
10 kHz, 43.5 dB @ 100 kHz, 49.3 dB @ 1 MHz hz. Dimensions: 7 in.
W X 10 in. D X 1.6 in. H. Weight: 4.8 lbs. Safety Agency: cETLus.
Warranty: Three Year.
VT4315-PRO Specifications: Maximum Output Current: 15 Amps. Line Cord: 8 ft. captive, 14 AWG,
with 3-conductor Edison plug. Spike Protection Modes: Protect-Or-Disconnect. Maximum Operating
Voltage: 134V RMS. Let Through Voltage: Let-Through Voltage: 200Vpk. Noise Attenuation
(Tranverse Mode): -13.8dB @ 10kHz, -41.0dB @ 100kHz, -43.9dB @ 1MHz Dimensions: 37”H x 2.6”W x 2.5”D
Weight: 9 lbs. Safety Agency: cULus Warranty: Three Year
28
BlueBOLT Network Management
BlueBOLT smartPLUGS
Bring BlueBOLT Power and Energy Management to any standard 120V Outlet
MD2-ZB
2 Surge Protected AC Outlets, individually monitored & controllable Outlet Status,
Wiring, Network Status Indicators
Left
Right
Join Network Pushbuttons
Requires BB-ZB1 Sold Separately, See Below
MD2-ZB Specifications: AC POWER. Protect or Disconnect™ Circuitry: Yes. Line Voltage: 120VAC, 50/60Hz. Initial Clamping Level: 200V.
Voltage Protection Rating: (UL1449 3rd Edition, 3,000A) L-N 400V, L-G 500V, N-G 400V. Nominal Discharge Current: 3,000A.
Protection Modes: L-N, L-G, N-G. Maximum Current Rating: 15A (1800W). EMI/RFI Noise Filtration: 50dB (100kHz – 1 MHz).
Response Time: < 1 nanosecond. Single Pulse Energy Dissipation: 1350 Joules. Peak Impulse Current: 60,000 A.
Catastrophic Surge Circuit: Yes. Thermal Fusing: Yes. Electrical Ratings. Line Voltage: 120 Vac, 60Hz. Current Rating: 12 A.
RF / ZigBee. ZigBee/802.15.4 Radio. 2.405-2.475 GHz, unlicensed ISM band.
SP-1000
2 AC Outlets, one bank of monitoring & control
Power and Network Status Indicators
Front
Power/Join Network Pushbutton
Requires BB-ZB1 Sold Separately, See Below
Bottom
SP-1000 Specifications: Electrical Ratings. Line Voltage: 120 Vac, 60Hz. Current Rating: 12 A.
RF / ZigBee. ZigBee/802.15.4 Radio. 2.405-2.475 GHz, unlicensed ISM band.
BB-ZB1Gateway
Allows easy access to multiple MD2-ZB &
SP-1000 via a standard BlueBOLT account
from any web enabled device.
Supports up to 15 Smartplugs
• System Reset Button
• Power Connector
• Network Connector
Indicator Lights
• Zigbee Connection
• Network Status
• Removable stand
BB-ZB1 Specifications: WIRELESS MESH NETWORK TECHNOLOGY. Management: BlueBOLT cloud access, HTTP web interface. Indicators: BlueBOLT access status, ZigBee network status,
Ethernet network link/activity. Dimensions: 5.3 in. x 4.0 in. x 1.3 in. ZigBee. Antenna: Internal. RF: ZigBee, 802.15.4. Ports: 1 RJ-45 port. Physical Layer: 10/100Base-T (auto sensing).
Power Input: 5VDC (power supply provided). Power Consumption: 1W
www.furmanpower.com
29
120V PRO LINE PRODUCT CATALOG
power accessories
D10-PFP Rackmount Power Distributor
The PF Power D10-PFP provides 10 circuit-breaker protected outlets in a compact, 1RU steel chassis. Safety Agency: cULus
VT-EXT Equipment Rack Power Distribution with Ground Isolation
8 outlet power strip designed specifically to be mounted to the
vertical leg section of an equipment rack. The perfect way to extend
the protection and filtration from an existing Panamax or Furman
power conditiner. 10 ft. power cord. Safety Agency: cULus
VERTEX
plugLock Locking Outlet Strip
The PF Power PlugLock provides 5 circuit-breaker protected
outlets with innovative locking mechanisms to secure wall warts
and plugs in place. The PlugLock can be installed to a rack with
attached mounting holes. Safety Agency: cTUVus
ss-6b Steel Power Strip
The SS-6B is a 6-outlet steel power block with standard level surge
protection, EMI/RFI filtration, heavy duty steel construction, and
15 ft. power cord. Safety Agency: cULus
adp-1520b Adaptor Cord
The ADP-1520B is an adapter cord for connection of a 20 amp
device to a 15 amp power source. NEMA-20R Female receptacle to
NEMA-15P Male plug. 12 AWG. Safety Agency: cULus.
rack lights and gooseneck lamps
RL-LED Rack Lights
Furman’s Rack Lights provide incandescent (RL-I) and LED
(RL-LED) illumination on a 1RU, 19” rackmountable plate.
GN-I / GN - LED Gooseneck Lamps
Furman’s 12” gooseneck lamps provide incandescent (GN-I) and
LED (GN-LED) illumination with a locking BNC connector, ideal for
use with many Furman products that provide a rear BNC connector
for discreet illumination at the back of an equipment rack.
30
DESCRIPTIONS / furman technology
icon glossary
For advanced technology descriptions, see page 4 - 9
Isolated Outlet Banks
DIGITAL VOLTMETER
Isolation of rear panel outlet banks provides further noise reduction at the point of use by eliminating electrical crosstalk, which
can be particularly troublesome when analog and digital equipment is plugged into the same circuit.
Laboratory-precision Digital Voltmeter displays incoming voltage
±1.5V.
DIGITAL VOLTMETER/AMMETER
“WALL WART” SPACING
Many Furman products feature spaced outlets on the rear panel
to accommodate bulky “wall wart” transformer plugs. 20A Classic
Series and Prestige models also include “Secure Straps” to hold
wall warts in place.
Switchable, dimmable digital meter displays incoming voltage
±1.5V, switchable to output current in amps. Display also features
Protection OK, Extreme Voltage, and color-coded Voltage Range
indicators for comprehensive power monitoring.
USB CHARGER
Front Panel Retractable Lights
Furman’s signature front panel retractable lights provide convenient, discreet illumination to a rack full of equipment. Standard
models include incandescent lights. Advanced models feature
long-lasting, cool running LED lights.
Front-panel USB charger provides convenient charging outlet for
most personal media devices and cell phones.
REAR PANEL BNC CONNECTOR
Rear-panel BNC Connector allows connection of BNC gooseneck
lamp for rear rack illumination.
DIAGNOSTIC LIGHTS
Diagnostic lights provide information regarding power quality and
operational status of the Furman unit, including Protection OK indicator, Extreme Voltage indicator, and color-coded Voltage Range
indicator (on select models).
STANDARD LEVEL SURGE PROTECTION
Standard level, MOV-based sacrificial surge protection.
LED VOLTMETER
Segmented LED Voltage Meter. Indicates incoming voltage in
2V steps ranging from 90V to 128V. The LED’s are color coded
(Red=Stop, Yellow=Caution, Green=Go) to inform users at a glance
if voltage is within a nominal range.
STANDARD LEVEL EMI/RFI FILTRATION
Standard level non-linear AC noise filtration.
www.furmanpower.com
31
©2017 Core Brands, LLC. All rights reserved.
Furman® is a registered trademark of Core Brands, LLC.
2017 Edition: Part# 10012260 – Rev A, 01/2017
1800 South McDowell Blvd, Petaluma, CA 94954, USA
To find your local Furman Dealer or Regional Sales Representative, please visit:
www.FurmanPower.com