Operating instructions SAMSUNG LE32R73BD

You can read the recommendations in the user guide, the technical guide or the installation guide for SAMSUNG LE32R73BD.
You'll find the answers to all your questions on the SAMSUNG LE32R73BD in the user manual (information, specifications, safety
advice, size, accessories, etc.). Detailed instructions for use are in the User's Guide.
User manual SAMSUNG LE32R73BD
User guide SAMSUNG LE32R73BD
Operating instructions SAMSUNG LE32R73BD
Instructions for use SAMSUNG LE32R73BD
Instruction manual SAMSUNG LE32R73BD
You're reading an excerpt. Click here to read official SAMSUNG
LE32R73BD user guide
http://yourpdfguides.com/dref/469629
Manual abstract:
To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the intensity of the picture.
Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may cause image retention. Always endeavour to
avoid black borders top or bottom by using the zoom function. This will help eliminate the black borders and fit the picture to the entire area of the screen.
Using a video game console may cause image retention and is not recommended. When using a PC input, avoid displaying still images for long durations and
reduce the brightness or contrast settings to decrease the intensity of the picture. IMPORTANT: Image retention issues are not covered by your Samsung®
warranty. · Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as
"screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
· Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the
difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are
not covered by the Warranty. · Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the `brightness' and `contrast' when displaying still images.
English Contents ConneCting and PreParing Your tV ListofParts.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
. . InstallingtheStand........
.....
.....
..........
..........
.....
.....
..........
....... InstallingtheWallMountKit ...
.....
.....
..........
..........
.....
.....
.. . ViewingtheControlPanel.......
..........
.....
.....
..........
..........
.....
.. ViewingtheConnectionPanel...
..........
..........
.....
.....
..........
.... . ViewingtheRemoteControl .....
.....
.....
..........
..........
.....
.....
..... . InstallingBatteriesintheRemoteControl....
..........
.....
.....
...... SwitchingOnandOff....
..........
.....
.....
..........
..........
.....
.....
....... . PlacingYourTelevisioninStandbyMode..
..........
.....
.....
......... Plug&Play.
..........
.....
.....
..........
..........
.....
.....
..........
..........
.....
. 2 2 2 3 4 6 6 7 7 7 uSing the dtV Feature PreviewingtheDTVMenuSystem....
..........
..........
.....
.....
......9 . UpdatingtheChannelListAutomatically ...
..........
.....
.....
........9 . UpdatingtheChannelListManually.
..........
.....
.....
..........
.. 0 2 EditingYourFavouriteChannels........
.....
.....
..........
..........
.....
.20 SelectingChannelManager....
..........
..........
.....
.....
..........
.......2 DisplayingProgrammeInformation...
.....
.....
..........
..........
.....
..22 ViewingtheEPG(ElectronicProgrammeGuide) Information...
..........
..........
.....
.....
..........
..........
.....
.....
..........
.....22 UsingtheScheduledList .....
.....
.....
..........
..........
.....
.....
..........
23 . SettingtheDefaultGuide.........
.....
.....
..........
..........
.....
.....
......23 ViewingAllChannelsandFavouriteChannels....
..........
.....
....24 SettingthePreferredLanguages.
..........
..........
.....
.....
..........
..24 ChoosingYourLanguage........
.....
.....
..........
..........
.....
.....
.......25 AdjustingtheTranslucencyLevel...
..........
.....
.....
..........
.... 5 2 SettinguptheParentalLock......
.....
.....
..........
..........
.....
.....
....25 SettingtheSubtitle......
..........
.....
.....
..........
..........
.....
.....
.........26 SelectingthePreferredLanguage (SubtitleorAudio).
..........
.....
.....
..........
..........
.....
.....
..........
......26 SettingtheDigitalText ....
.....
.....
..........
..........
.....
.....
..........
.....26 . ViewingProductInformation....
.....
.....
..........
..........
.....
.....
......26 . CheckingtheSignalInformation...
..........
.....
.....
..........
..........
.27 UpgradingtheSoftware(Option) ....
.....
..........
..........
.....
.....
....27 . ViewingCommonInterface.....
..........
.....
.....
..........
..........
.....
..27 SelectingtheCI(CommonInterface)Menu...
..........
..........
....28 Resetting.
.....
..........
..........
.....
.....
..........
..........
.....
.....
..........
....28 . Setting the ChannelS StoringChannelsAutomatically .....
.....
.....
..........
..........
.....
.....
8 . StoringChannelsManually.........
..........
.....
.....
..........
..........
... 8 . SettingtheChannelManager .
.....
..........
..........
.....
.....
..........
.. 9 . ActivatingtheChildLock.......
.....
.....
..........
..........
.....
.....
... 9 . SortingtheStoredChannels......
..........
.....
.....
..........
..........
....0 AssigningChannelsNames.
.....
..........
..........
.....
.....
..........
.....0 FineTuningChannelReception.....
.....
.....
..........
..........
.....
.....
0 LNA(LowNoiseAmplifier) ..........
..........
.....
.....
..........
..........
... . Setting the PiCture ChangingthePictureStandard.
.....
..........
..........
.....
.....
..........
AdjustingtheCustomPicture..........
.....
.....
..........
..........
.....
.... ChangingtheColourTone .
..........
..........
.....
.....
..........
..........
.. . ResettingthePictureSettingstothe FactoryDefaults..
.....
..........
..........
.....
.....
..........
..........
.....
.....
...2 ChangingthePictureSize.......
..........
.....
.....
..........
..........
.....
..2 FreezingtheCurrentPicture...
..........
..........
.....
.....
..........
.......2 DigitalNoiseReduction...
.....
.....
..........
..........
.....
.....
..........
.....2 DNIeDemo(DigitalNaturalImageengine) .....
.....
.....
..........
..3 . ViewingthePictureInPicture(PIP).......
.....
.....
..........
..........
..3 PIPSettings...
.....
..........
..........
.....
.....
..........
..........
.....
.....
........4 uSing the teletext Feature TeletextDecoder..
..........
.....
.....
..........
..........
.....
.....
..........
. 8 2 DisplayingtheTeletextInformation.........
.....
.....
..........
...... 9 2 SelectingaSpecificTeletextPage ....
.....
.....
..........
..........
. 9 . 2 UsingFastexttoSelectaTeletextPage...
.....
..........
......... 0 3 Setting the PC SettingupYourPCSoftware (BasedonWindowsXP).
.....
.....
..........
..........
.....
.....
..........
0 3 DisplayModes..........
.....
.....
..........
..........
.....
.....
..........
...... 0 . 3 SettingthePC...
.....
.....
..........
..........
.....
.....
..........
..........
.... 3 Setting the Sound ChangingtheSoundStandard.
.....
..........
..........
.....
.....
..... 4 . AdjustingtheSoundSettings ....
..........
.....
.....
..........
......... 4 .
ConnectingHheadphones.....
.....
..........
..........
.....
.....
........ 4 . SettingtheTruSurroundXT(SRSTSXT).
..........
.....
.....
.... 5 AdjustingtheVolumeAutomatically......
..........
.....
.....
........ 5 SelectingtheInternalMute..
..........
.....
.....
..........
..........
.....
5 ListeningtotheSoundoftheSubPicture.....
..........
......... 5 ResettingtheSoundSettingstotheFactoryDefaults .
.... 6 .
reCommendationS For uSe UsingtheAnti-TheftKensingtonLock .....
..........
..........
.....
2 . 3 Troubleshooting: BeforeContactingServicePersonnel....
..........
..........
.....
.. 2 3 TechnicalandEnvironmentalSpecifications ...
..........
...... 3 . 3 Warning!ImportantSafetyInstructions WiringtheMainsPowerSupplyPlug(UKOnly) WarrantyCard Setting the time
SettingandDisplayingtheCurrentTime...
.....
.....
..........
... 6 SettingtheSleepTimer.......
.....
.....
..........
..........
.....
.....
..... 6 . SwitchingtheTelevision OnandOffAutomatically....
..........
.....
.....
..........
..........
.....
. 6 Setting the otherS ChoosingYourLanguage ....
..........
..........
.....
.....
..........
..... 7 . UsingGameMode....
.....
.....
..........
..........
.....
.....
..........
...... 7 SettingtheBlueScreenMode/ SelectingtheMelody....
.....
.....
..........
..........
.....
.....
..........
. 7 . UsingtheEnergySavingFeature........
.....
.....
..........
......... 8 SelectingtheSource.
.....
.....
..........
..........
.....
.....
..........
...... 8 EditingtheInputSourceNames....
.....
.....
..........
..........
.....
8 English- Symbol Press Important Note One-Touch Button list of Parts PleasemakesurethefollowingitemsareincludedwithyourLCDTV.
Ifanyitemsaremissing,contactyourdealer. M4XL6 RemoteControl& Batteries(AAAx2) Owner'sInstructions PowerCord Warrantycard Cover-Bottom
StandScrewX4 Stand CleaningCloth RegistrationCards ServiceNetworkCard SafetyGuide
Warrantycard/ServiceNetworkCard/SafetyGuide/RegistrationCards(Notavailableinalllocations)
Thestandandstandscrewmaynotbeincludeddependingonthemodel. installing the Stand <2> <3> 1.PlacetheTVfaceddownonasoftclothorcushiononatable.
2.PutthestandintotheholeatthebottomoftheTV. 3.Insertscrewintotheholeindicatedandtighten. Thestandisinstalledformodelswiththescreensizeof40inchandabove.
installing the Wall mount Kit Wallmountitems(soldseparately)allowyoutomounttheTV onthewall. Fordetailedinformationoninstallingthewallmount,seethe
instructionsprovidedwiththeWallMountitems.Contacta technicianforassistancewheninstallingthewallmounted bracket.
SamsungElectronicsisnotresponsibleforanydamagetothe productorinjurytoyourselforothers ifyouelecttoinstalltheTVonyourown. R
emovethestandandcoverthebottomholewithacap andfastenwithtwoscrews.
English-2 Viewing the Control Panel Theproductcolourandshapemayvarydependingonthemodel. SourCe ogglesbetweenalltheavailableinputsources T
(TV,Ext.,Ext.2,AV,S-Video,Component,PC,HDMI, DTV).Intheon-screenmenu,usethisbuttonasyouuse theenter buttonontheremotecontrol. menu resstoseeanonscreenmenuofyourTV'sfeatures. P IncaseofDTVmode,theDTVmenuappears. Presstodecreaseorincreasethevolume. Intheon-screenmenu,usethe buttonsasyou
usetheand buttonsontheremotecontrol. Presstochangechannels.
Intheon-screenmenu,usethe buttonsasyou usetheand buttonsontheremotecontrol. (WithouttheRemoteControl,youcanturnontheTVby usingtheChannelbuttons.)
Speakers P ower indicator Blinksandturnsoffwhenthepowerisonandlightsupin stand-bymode. (Power) PresstoturntheTVonandoff. r emote Control Sensor
AimtheremotecontroltowardsthisspotontheTV.
English-3 Viewing the Connection Panel [RearPanelJacks] (32inch,37inch,40inch) [SidePanelJacks] (26inchmodeldoesnot havethesidepaneljacks.)
PowerInput [RearPanelJacks] (26inch) WheneveryouconnectanexternaldevicetoyourTV,makesurethatpowerontheunitisturnedoff.
Whenconnectinganexternaldevice,matchthecolouroftheconnectionterminaltothecable.
You're reading an excerpt. Click here to read official SAMSUNG
LE32R73BD user guide
http://yourpdfguides.com/dref/469629
Connecting an Aerial or Cable Television Network Toviewtelevisionchannelscorrectly,asignalmustbereceivedbythesetfromoneofthefollowingsources:
-Anoutdooraerial/Acabletelevisionnetwork/Asatellitenetwork English-4 Connecting HDMI/DVI -SupportsconnectionsbetweenHDMI-connectionenabledAVdevices(Set-TopBoxes,DVDplayers,AVreceiversanddigitalTVs). pingtheCICARDmaycausedamagetoit.
-Serviceconnectionforqualifiedserviceengineer. English-5 Service Port Viewing the remote Control S electsatargetdevicetobe
controlledbytheSamsungremotecontrol (TV,DVD,STB,CABLE,VCR) T elevisionStandbybutton N umberbuttonsfordirect channelaccess O ne/Twodigitchannelselection I tdisplay"ChannelManager" onthescreen. SelectstheTVandDTVmodedirectly V CR/DVDFunctions Rewind,Stop,Play/Pause,
Fast/Forward Volumeincrease Volumedecrease T emporarysoundswitch-off enudisplayand M changeconfirmation E lectronicProgramGuide(EPG)display
Picture-In-PictureOn/Off Picturefreeze Pictureeffectselection S oundeffectselection Adjusts5separatedevices-TV,DVD, STB,CABLE,orVCR. A
vailablesourceselection P reviouschannel D TVmenudisplay T heperformanceoftheremotecontrolmaybeaffectedbybrightlight. T
hisisaspecialremotecontrolforthevisuallyimpaired,andhasBraillepointsonthe Power,ChannelandVolumebuttons. AutomaticPower-off P :Nextchannel P
:Previouschannel ExittheOSD C ontrolthecursorinthemenu Usetoseeinformationonthe currentbroadcast P icturesizeselection D igitalsubtitledisplay S
oundmodeselection SRSTSXTselection teletext Functions E xitfromtheteletextdisplay Teletextindex T eletexthold Teletextsizeselection T
eletextmodeselection(LIST/FLOF) eletextsubpage T P :Teletextnextpage P :Teletextpreviouspage Teletextcancel Teletextreveal
AlternatelyselectTeletext,Double,orMix. Fastexttopicselection Teletextstore installing Batteries in the remote Control 1.
Liftthecoveratthebackoftheremotecontrolupwardasshowninthefigure. 2. InstalltwoAAAsizebatteries.
Makesuretomatchthe"+"and""endsofthebatterieswiththediagraminsidethecompartment. 3. Replacethecover. R
emovethebatteriesandstoretheminacool,dryplaceifyouwon'tbeusingtheremotecontrolforalongtime. Theremotecontrolcanbeuseduptoabout23feetfromtheTV.
(AssumingtypicalTVusage,thebatterieslastforaboutoneyear.) if the remote control doesn't work, check the following: .IstheTVpoweron?
2.Aretheplusandminusendsofthebatteriesreversed? 3.Arethebatteriesdrained? 4.
Isthereapoweroutage,oristhepowercordunplugged? 5.Isthereaspecialfluorescentlightorneonsignnearby? English-6 Switching on and off The mains lead is
attached to the rear of your set. 1. Plugthemainsleadintoanappropriatesocket. T hestandbyindicatorlightsuponthefrontoftheset.
2. Pressthe buttononthefrontoftheset. Youalsocanpressthe PoWer buttonorthetV/dtV buttonontheremotecontroltoturntheTVon. 3.
Pressthenumericbutton(0~9)orchannelup/down( / )buttonontheremotecontrolor Theprogrammethatyouwerewatchinglastisreselectedautomatically.
buttonontherightsideoftheset. W henyouswitchthesetonfortheveryfirsttime,youwillbeaskedtochooselanguageinwhichthemenusaretobedisplayed. 4.
Toswitchyoursetoff,pressthePoWer buttonagain. Placing Your television in Standby mode Your set can be placed in standby mode in order to reduce the
power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1. PressthePoWer
buttonontheremotecontrol. ,numericbuttons (0~9), tV/dtV buttonorchannelup/down( / )buttonagain.
Thescreenisturnedoffandaredstandbyindicatorappearsonthefrontofyourset.
D onotleaveyoursetinstandbymodeforlongperiodsoftime(whenyouareawayonholiday,forexample). Itisbesttounplugthesetfromthemainsandaerial. 2.
oswitchyoursetbackon,simplypressthePoWer T Plug & Play When the TV is initially powered on, several basic settings proceed automatically and
subsequently. The following settings are available. 1. PressthePoWer buttonontheremotecontrol. Themessage"StartPlug&Play"isdisplayedwith"OK"selected.
2. Selecttheappropriatelanguagebypressingtheorbutton.
Presstheenter buttontoconfirmyourchoice. 3. Themessage"Checkantennainput."isdisplayedwith"OK"selected. Presstheenter button.
P leasecheckthattheantennacableisconnectedcorrectly. 4. Selecttheappropriatecountrybypressingtheorbutton. Presstheenter buttontoconfirmyourchoice. 5.
The"AutoStore"menuisdisplayedwiththe"Start"selected.Presstheenter Thechannelsearchwillstartandendautomatically.
Afteralltheavailablechannelsarestored,the"ClockSet"menuappears. Presstheenter buttonatanytimetointerruptthememorizationprocess. button. 6. Presstheenter
button. Selectthe"Hour"or"Minute"bypressingtheorbutton. Setthe"Hour"or"Minute"bypressingtheorbutton. Y
oucanalsosetthehourandminutebypressingthenumberbuttonsontheremotecontrol.
7. Presstheenter buttontoconfirmyoursetting. TheDTVchannelscanmenuappearsandtheDTVchannelisautomaticallyupdated.
IftheDTVchannelisupdated,theSourceinthesourcelistoftheInputmenuis automaticallychangedtoDTV.
FordetaileddescriptionsaboutDTVchannelupdate,refertopage27ofthismanual. language: Selectyourlanguage. Country: Selectyourcountry. auto Store:
Automaticallyscansforandstoreschannelsavailableinthelocalarea. Clock Set: SetsthecurrenttimefortheTVclock. If you want to reset this feature.
.. 1. Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Setup",thenpresstheenter 2.
Presstheenter buttonagain,toselect"Plug&Play". 3. Themessageto"StartPlug&Play"isdisplayed. button. English-7 - Storing Channels automatically - Storing
Channels manually Storing Channels automatically You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and
clear any channels you do not wish to watch. 1. Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Channel",thenpresstheenter 2. Presstheenter
buttontoselect"Country". buttontoconfirmyourchoice. button. button. 3.
Selecttheappropriatecountrybypressingtheorbutton.Presstheenter 4. Presstheorbuttontoselect"AutoStore",thenpresstheenter 5. Presstheenter button.
TheTVwillbeginmemorizingalloftheavailablechannels. Presstheenter buttonatanytimetointerruptthememorizationprocessandreturntothe"Channel"menu. 6.
Afteralltheavailablechannelsarestored,the"Sort"menuappears. Storing Channels manually You can store up to 100 channels, including those received via
cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify. 1. Pressthemenu buttontodisplaythemenu.
Presstheorbuttontoselect"Channel",thenpresstheenter 3.
You're reading an excerpt. Click here to read official SAMSUNG
LE32R73BD user guide
http://yourpdfguides.com/dref/469629
Presstheenter buttontoselect"Programme".
button. button. 2. Presstheorbuttontoselect"ManualStore",thenpresstheenter 4.
Toassignaprogrammenumbertoachannel,findthecorrectnumberbypressingtheorbutton andthenpresstheenter button.
Youcanalsosetaprogrammenumberbypressingnumberbuttonsontheremotecontrol. 5. Presstheorbuttontoselect"ColourSystem",thenpresstheenter 7.
Presstheorbuttontoselect"SoundSystem",thenpresstheenter Ifthereisanabnormalsoundornosound,re-selectthesoundsystemrequired. button. button. button.
button. button. 6.
Selectthecolourstandardrequiredbypressingtheorbuttonthen,presstheenter 8. Selectthesoundstandardrequiredbypressingtheorbutton,thenpresstheenter 9.
Ifyouknowthenumberofthechanneltobestored,presstheorbuttontoselect"Channel".Presstheenter
SelectC(Airchannel)orS(Cablechannel)bypressingtheorbutton.Pressthe buttontoselectchannel.
Selecttherequirednumberbypressingtheorbuttonandthenpresstheenter button. Channelmode:P(Programmemode),C(Airchannelmode),S(Cablechannelmode)
Youcanalsosetachannelnumberbypressingnumberbuttonsontheremotecontrol. 10.Ifyoudonotknowthechannelnumbers,presstheorbuttontoselect"Search".
Presstheenter button.
Searchbypressingtheorbuttonandthenpresstheenter 11.Presstheorbuttontoselect"Store".Presstheenter 12.Repeatsteps3to11foreachchanneltobestored.
Programme: Selectsaprogramnumberforthechannel.
Colour System: Setsthecoloursupportingsystem. Sound System: Setsthesoundsupportingsystem. button. buttontoselect"OK". Channel:Selectsachannel.
Search: Scansforthefrequencyvalueforthechannel. Store: Savesyoursettings. English-8 Setting the Channel manager Set the channels according to your
preference. You can easily delete, add, or lock the channel you want. 1. 2. 3. 4. 5. 6.
7. Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Channel",thenpresstheenter Presstheorbuttontoselect"ChannelManager",
thenpresstheenter button. Presstheenter buttonagain,toselect"ChannelManager". ". Pressthebuttontoselect" button.
Presstheorbuttontoselecttheundesiredchannel, thenpresstheenter buttontocancel. Repeatsteps5foreachchanneltobeselectedorcanceled Presstheexit
buttontoexit. " "isactivewhen"ChildLock"isselectedto"On". Y oucanselecttheseoptionsbysimply pressingtheCh mgr buttononthe remotecontrol.
activating the Child lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video
and audio. Child Lock cannot be released using the buttons on the side. Only the remote control can release the Child Lock setting, so keep the remote control
away from children. 1. Pressthemenu buttontodisplaythemenu.
Presstheorbutton toselect"Channel",thenpresstheenter button. 2. Presstheorbuttontoselect"ChannelManager", thenpresstheenter button. 3.
Presstheorbuttontoselect"ChildLock",thenpresstheenter 4.
Presstheorbuttontoselect"On"or"Off".Presstheenter 5. Presstheorbuttontoselect"ChannelManager", thenpresstheenter button. 6. Pressthebuttontoselect"
"line. 7. Presstheorbuttontoselectthechannelsyouwanttolock, thenpresstheenter button. 8. Repeatsteps7foreachchanneltobelockedorunlocked. 9.
Presstheexit buttontoexit. Select"On"or"Off"in"ChildLock"toeasilyturnthechannelswhich selectedon" "tobeactiveorinactive. button. button. English-9 Sorting
the Stored Channels You can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically
stored. Give easily remembered numbers to the channels that you watch most often. 1. Pressthemenu buttontodisplaythemenu.Presstheorbutton
toselect"Channel",thenpresstheenter button. 2.
Presstheorbuttontoselect"Sort",thenpresstheenter button. 3. Selectthechannelnumberthatyouwishtochangebypressingthe orbuttonrepeatedly.Presstheenter
button. Theselectedchannelnumberandnamearemovedtorightside.
4. Presstheorbuttontomovetothepositioninwhichyouwouldliketochangeand thenpresstheenter button. T
heselectedchannelisexchangedwiththeonepreviouslystoredtothechosennumber. 5. Repeatsteps3to4foranotherchanneltobesorted.
6. Presstheexit buttontoexit. assigning Channels names Channel names will be assigned automatically when channel information is broadcast. These names
can be changed, allowing you to assign new names. 1. Pressthemenu buttontodisplaythemenu.Presstheorbutton toselect"Channel",thenpresstheenter button. 2.
Presstheorbuttontoselect"Name",thenpresstheenter 3. Ifnecessary,selectthechanneltobeassignedtoanewnameby pressingtheorbutton.
Presstheenter button. Theselectionbarisdisplayedaroundthenamebox. to... Selectaletter,numberorsymbol Moveonthenextletter Movebackthepreviousletter
Confirmthename then... Presstheorbutton Pressthebutton Pressthebutton Presstheenter button button. 4.
T hecharactersavailableare: Lettersofthealphabet(A~Z)/Numbers(0~9)/Specialcharacters(-,space) 5.
Repeatsteps3to4foreachchanneltobeassignedtoanewname. 6. Presstheexit buttontoexit. Fine tuning Channel reception Use fine tuning to manually adjust a
particular channel for optimal reception.
1. Usethenumberbuttonstodirectlyselectthechannelthatyouwanttofinetune. 2. Pressthemenu buttontodisplaythemenu.
Presstheorbuttontoselect"Channel",thenpresstheenter 3.
Presstheorbuttontoselect"FineTune",thenpresstheenter 4. Presstheorbuttontoadjustthefinetuning. Presstheenter button. 5. Pressthe exit buttontoexit. F
inetunedchannelsthathavebeensavedaremarkedwithanasterisk"*"onthe righthandsideofthechannelnumberinthechannelbanner.Andthechannelnumberturnsred. T oresetthefine-tuning,select"Reset"bypressingtheorbuttonandthenpressthe
enter button. button. button.
button. English-0 lna (low noise amplifier) If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier
boosts the incoming signal). 1. Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Channel",thenpresstheenter 2.
Presstheorbuttontoselect"LNA",thenpresstheenter 3. Presstheorbuttontoselect"On"or"Off".Presstheenter 4. Presstheexit buttontoexit. button.
button. button. Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. 1. Pressthemenu
buttontodisplaythemenu.
Presstheorbuttontoselect"Picture",thenpresstheenter 2. Presstheenter 3. Presstheenter buttonagain,toselect"Mode". buttonagain,toselect"Mode". button.
button. 4. Presstheor buttontoselectthedesiredpictureeffect.Presstheenter 5. Presstheexit buttontoexit. Y oucanalsopresstheP.mode buttonontheremotecontrolto
selectoneofthepicturesettings. dynamic: Selectsthepictureforhigh-definitioninabrightroom. Standard:
Selectsthepictureforoptimumdisplayinanormalenvironment.
You're reading an excerpt. Click here to read official SAMSUNG
LE32R73BD user guide
http://yourpdfguides.com/dref/469629
movie: Selectsthepictureforcomfortabledisplayinadarkroom.
ustom: Selecttoviewyourfavoritedisplaysettings.(Referto"AdjustingtheCustomPicture") C ThePicturemodemustbeadjustedseparatelyforeachinputsource.
Youcanreturntothefactorydefaultspicturesettingsbyselectingthe"Reset". (Referto"ResettingthePictureSettingstotheFactoryDefaults"onpage2) adjusting the
Custom Picture Your set has several settings which allow you to control picture quality. 1. Toselectthedesiredpictureeffect,followthe
"ChangingthePictureStandard"instructionsnumberto4. 2. resstheorbuttontoselectaparticularitem.Presstheenter P button. 3.
Presstheorbuttontodecreaseorincreasethevalueofaparticularitem. Presstheenter button. 4. Presstheexit buttontoexit. Contrast:
Adjuststhelightnessanddarknessbetweenobjectsandthebackground.
Brightness:Adjuststhebrightnessofthewholescreen. Sharpness: Adjuststheoutlineofobjectstoeithersharpenthemormakethemmoredull. Colour:
Adjuststhecolours,makingthemlighterordarker. tint (ntSC only): Adjuststhecolourofobjects,makingthemmoreredorgreenforamorenaturallook.
TheadjustedvaluesarestoredaccordingtotheselectedPicturemode.
InPCMode,Only"Contrast","Brightness"and"Colour"canbeadjusted. Changing the Colour tone You can select the most comfortable colour tone to your eyes.
1. Toselectthedesiredpictureeffect,followthe "ChangingthePictureStandard"instructionsnumberto4. 2.
Presstheorbuttontoselect"ColourTone",thenpresstheenter 3. resstheorbuttontoselectthedesiredcolourtonesetting. P Presstheenter button. 4. Presstheexit
buttontoexit.
Cool2: Makesthecolourtemperaturebluerthan"Cool"menu. Warm1: Makeswhitesreddish. Cool1: Makeswhitesbluish. Warm2:
Makesthecolourtemperatureredderthan normal:Keepswhiteswhite. "Warm"menu. TheadjustedvaluesarestoredaccordingtotheselectedPicturemode. Englishbutton. resetting the Picture Settings to the Factory defaults You can return to the factory defaults picture settings. 1. Toselectthedesiredpictureeffect,followthe
"ChangingthePictureStandard"instructionsnumberto4onpage.
2. Presstheorbuttontoselect"Reset",thenpresstheenter 3. Presstheexit buttontoexit. The"Reset"willbesetforeachpicturemode. button.
Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. 1. 2. 3. 4.
Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Picture",thenpresstheenter Presstheorbuttontoselect"Size",thenpresstheenter
electtherequiredoptionbypressingtheorbutton. S Presstheenter button. Presstheexit buttontoexit. button. button. Y oucanselecttheseoptionsby
simplypressingtheP.SiZe button ontheremotecontrol. auto Wide:Automaticallyadjuststhepicturesizetothe"6:9"aspectratio.
16:9:Adjuststhepicturesizeto6:9appropriateforDVDsorwidebroadcasting.
Zoom: agnifiesthe6:9widepicture(intheverticaldirection)tofitthescreensize. M 4:3:Thisisthedefaultsettingforavideomovieornormalbroadcasting.
"AutoWide"functionisavailableonlyin"TV","Ext","Ext2","AV",and"S-Video"mode. InPCMode,only"6:9"and"4:3"modecanbeadjusted. S
electbypressingtheorbuttons.Usetheorbuttontomovethepictureup anddown.Afterselecting,usetheorbuttontomagnifyorreducethepicturesize
intheverticaldirection. Freezing the Current Picture Press the STILL button to freeze a moving picture into a still one. Press again to cancel. digital noise
reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that
may appear on the screen.
1. Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Picture",thenpresstheenter 3. @@ resstheexit buttontoexit. P button.
button. button. 2. Presstheorbuttontoselect"DigitalNR",thenpresstheenter English-2 dnie demo (digital natural image engine) Samsung's new technology
brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images.
DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On. 1. Pressthemenu
buttontodisplaythemenu. Presstheorbuttontoselect"Picture",thenpresstheenter 3. @@ resstheexit buttontoexit. P Thesefunctionsdon'tworkinPCmode.
TheDNleDemoisdesignedtoshowthedifferencebetweentheregularandDNIepictures. Bydefault,theproductdisplaysthepicturewithDNleapplied. button.
button. button. 2. Presstheorbuttontoselect"DNIeDemo",thenpresstheenter Viewing the Picture in Picture (PiP) You can display a sub picture within the main
picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while
watching the main picture. 1. 2. 3. 4. P ressthePiPbuttonontheremote controlrepeatedlytoactivateor deactivatethe"PIP".
Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Picture",thenpresstheenter Presstheorbuttontoselect"PIP",thenpresstheenter Presstheenter
buttonagain. Presstheorbuttontoselect"On",thenpressenter I fthePIPisactivated,thesizeofthemainpictureturnsto"6:9". button. button.
button. resstheorbuttontoselect"Source",thenpressenter button. P Selectasourceofthesubpicturebypressingtheorbutton andpresstheenter button. T
hesubpicturecanservedifferentsourceselectionsbasedonwhatthemain pictureissetto. 5.
resstheorbuttontoselect"Swap". P Tointerchangethemainpictureandthesubpicture,select"Swap"option andpresstheenter button.
Themainpictureandthesubpictureareinterchanged. Ifmainpictureisin"PC"mode,"Swap"isnotavailable. 6.
Presstheorbuttontoselect"Size"ofthesubpictureandthenpressthe enter button.Selectasizeofthesubpicturebypressingtheorbutton andthenpresstheenter button.
Ifmainpictureisin"PC"mode,"Size"isnotavailable. 7. Presstheorbuttontoselect"Position",thenpresstheenter button.
Selectthepositionofthesubpicturebypressingtheorbuttonand thenpresstheenter button. 8. Presstheorbuttontoselect"Programme"andthenpresstheenter button.
Youcanselectthechannelthatyouwanttoviewthroughsubpicturebypressing theorbutton.Presstheenter button.
The"Programme"canbeactivewhenthesubpictureissettoTV. 9. resstheexit buttontoexit. P
YoumaynoticethatthepictureinthePIPwindowbecomesslightlyunnaturalwhenyouusethemain screentoviewagameorkaraoke.
Source:Usedtoselectasourceofthesubpicture.
Swap:Usedtointerchangethemainpictureandthesubpicture. Size:Usedtoselectasizeofthesubpicture. Position:Usedtomovethesubpicture.
Programme:UsedtoChangethesubpicture. English-3 PiP Settings o:PIPoperates,x:PIPdoesn'toperate Main Sub TV Ext.
Ext.2 AV S-Video Component PC HDMI DTV TV X X X X X X O O X Ext.
You're reading an excerpt. Click here to read official SAMSUNG
LE32R73BD user guide
http://yourpdfguides.com/dref/469629
X X X X X X O O X Ext.2 X X X X X X O O X AV X X X X X X O O X S-Video X X X X X X X O X Component X X X X X X X O X PC X X X X X X X X X
HDMI O O O O O O X X X DTV X X X X X X X X X Changing the Sound Standard You can select the type of the special sound effect to be used when
watching a given broadcast. 1.
2. 3. 4. Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Sound",thenpresstheenter Presstheenter buttonagain,toselect"Mode". button.
electtherequiredsoundeffectbypressingtheorbuttonrepeatedlyandthen S presstheenter button. Presstheexit buttontoexit. Youcanalsoselecttheseoptions
bysimplypressingtheS.mode buttonontheremotecontrol.
Standard: Selectsthenormalsoundmode. music: Emphasizesmusicovervoices. movie: Providesliveandfullsoundformovies. Speech:
Emphasizesvoicesoverothersounds. ustom: Selectsyourcustomsoundsettings. C (Referto"AdjustingtheSoundSettings") adjusting the Sound Settings The sound
settings can be adjusted to suit your personal preferences. 1. Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Sound",thenpresstheenter 3.
Presstheorbuttontoselectaparticularitem.
Presstheenter button. 4. Presstheor buttontoreachtherequiredsetting. Presstheenter button. 5.
Presstheexit buttontoexit. fyoumakeanychangestothesesettings,theSoundModeisautomaticallyswitchedto"Custom". I button. button. 2.
Presstheorbuttontoselect"Equalizer",thenpresstheenter Connecting hheadphones You can connect a set of headphones to your set if you wish to watch a TV
programme without disturbing the other people in the room. Whenyouinserttheheadsetjackintothecorrespondingport,youcanoperateonly
"InternalMute"and"SoundSelect"(inPIPmode)inSoundmenu. Prolongeduseofheadphonesatahighvolumemaydamageyourhearing.
Youwillnotreceivesoundfromthespeakerswhenyouconnectheadphonestothesystem. English-4 Setting the truSurround xt (SrS tSxt) TruSurround XT is a
patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround
sound experience through any twospeaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1.
Pressthemenu buttontodisplaythemenu.
Presstheorbuttonto select"Sound",thenpresstheenter button. 2. Presstheorbuttontoselect"SRSTSXT",thenpressthe enter button. 3.
Presstheorbuttontoselect"On"or"Off".Presstheenter 4. Presstheexit buttontoexit. button. Y oucanalsosettheseoptions simplybypressingtheSrS button
onremotecontrol. symbolaretrademarksof TruSurroundXT,SRSand SRSLabs,Inc.
TruSurroundXTtechnologyisincorporatedunder licensefromSRSLabs,Inc. adjusting the Volume automatically Each broadcasting station has its own signal
conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature allows you to automatically adjust the volume of
the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. 1.
Pressthemenu buttontodisplaythemenu.
Presstheorbuttontoselect"Sound",thenpresstheenter 3. Presstheorbuttontoselect"On"or"Off".Presstheenter 4. Presstheexit buttontoexit. button.
button. button. 2. Presstheorbuttontoselect"AutoVolume",thenpresstheenter Selecting the internal mute If you want to hear the sound through separate
speakers, cancel the internal amplifier. 1. Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Sound",thenpresstheenter 3.
Presstheorbuttontoselect"On"or"Off".Presstheenter 4. Presstheexit buttontoexit.
hen"InternalMute"issetto"On',theSoundmenusexceptfor"SoundSelect" W (inPIPmode)cannotbeadjusted. button. button. button. 2.
Presstheorbuttontoselect"InternalMute",thenpresstheenter listening to the Sound of the Sub Picture During the PIP features activation, you can listen to the
sound of the sub picture. 1. Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Sound",thenpresstheenter 3. Presstheorbuttontoselect"Sub".
Presstheenter 4. Presstheexit buttontoexit. main: sedtolistentothesoundofthemainpicture. U Sub: sedtolistentothesoundofthesubpicture. U
Youcanselectthisoptionwhenthe"PIP"issetto"On".
(refertopage3) English-5 button. button. 2. Presstheorbuttontoselect"SoundSelect",thenpresstheenter button. resetting the Sound Settings to the Factory
defaults If Game Mode is On, the Reset Sound function is activated.
Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults. 1. Pressthemenu buttontodisplaythemenu.
Presstheorbuttontoselect"Sound",thenpresstheenter 2. Presstheorbuttontoselect"Reset",thenpresstheenter 3. Presstheexit buttontoexit.
Youcanselectthisoptionwhenthe"GameMode"issetto"On". button. button. Setting and displaying the Current time You can set the TV's clock so that the current
time is displayed when you press the INFO button.
@@1. 2. 3. 4. 5. Pressthemenu buttontodisplaythemenu. @@@@button. buttontoselect"ClockSet". Press the..
. orbutton. @@@@@@1. 2. 3.
4. @@@@@@button. @@Switch off automatically at the time you select. The first step is to set the television's clock. 1.
Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Setup",thenpresstheenter button. 2. Presstheorbuttontoselect"Time",thenpresstheenter
button. button. 3. @@@@ Whenfinished,presstheenter buttontoreturn. 5. @@6. @@ Whenfinished,presstheenter buttontoreturn.
7. Presstheexit buttontoexit. @@@@1. 2. 3. Pressthemenu buttontodisplaytheon-screenmenu. Presstheorbuttontoselect"Setup",thenpresstheenter button.
@@@@1. Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Setup",thenpresstheenter 3.
@@ resstheexit buttontoexit. @@ IfyoudisplaytheTVmenuinGamemode,thescreenshakesslightly. GameModeisnotavailableinTVmode. @@@@·
heResetSoundfunctionisactivated.SelectingtheResetfunctionaftersettingtheequalizer T resetstheequalizersettingtothefactorydefaults.
button. button. button. 2. Presstheorbuttontoselect"GameMode",thenpresstheenter Setting the Blue Screen mode / Selecting the melody Blue Screen: If no
signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off". Melody: You can hear melody sound when the television is
powered on or off. 1. Pressthemenu buttontodisplaythemenu. Presstheorbuttontoselect"Setup",thenpresstheenter 2.
Presstheorbuttontoselect"BlueScreen"or"Melody". Presstheenter button. 3. resstheorbuttontoselect"On"or"Off".
You're reading an excerpt. Click here to read official SAMSUNG
LE32R73BD user guide
http://yourpdfguides.com/dref/469629
P Presstheenter button.
4. resstheexit buttontoexit. P English-7 button. using the energy Saving Feature This function adjusts the brightness of the TV so as to reduce power
consumption. When you watching TV at night, set the "Energy Saving " mode option to "High" so as to reduce the dazzling of your eyes as well as the power
consumption. 1. Pressthemenu buttontodisplaytheon-screenmenu. Presstheorbuttontoselect"Setup",thenpresstheenter button. button. 2.
Presstheorbuttontoselect"EnergySaving",thenpresstheenter 3. electtherequiredoption(Off,Low,Medium,High)bypressingtheorbutton. S Presstheenter button. 4.
Presstheexitbuttontoexit.
Selecting the Source You can select among external sources connected to your TV's input jacks. 1. 2. Pressthemenu buttontodisplaythemenu. Presstheenter
button,toselect"Input".
Presstheenter buttonagain,toselect"SourceList". W hennoexternaldeviceisconnectedtoyourset,only"TV","Ext.","Ext.2"are activatedinthe"SourceList"."AV","SVideo","Component","PC","HDMI","DTV"are activatedonlywhentheyareconnectedtoyourset. 3. Selecttherequireddevicebypressingtheorbutton. Presstheenter
button. P resstheSourCebuttonontheremotecontroltotoggelbetweenalltheavailablesource.
TVmodecanbeselectedbypressingthetV/dtVbutton,numberbuttons(0~9),andthe P / buttonontheremotecontrol.
ButitcannotbeselectedusingtheSourCebutton. editing the input Source names Name the device connected to the input jacks to make your input source selection
easier. 1. Pressthemenu buttontodisplaythemenu. Presstheenter button,toselect"Input". 2. Presstheorbuttontoselect"EditName",thenpresstheenter 3.
Presstheorbuttontoselectthedevicethatyouwishtoedit. Presstheenter button. 4.
Presstheorbuttontoselecttherequireddevice. Presstheenter button. 5. Presstheexit buttontoexit. button.
English-8 Previewing the dtV menu System To help you navigate around the on-screen menu system and adjust the various settings available, refer to the
following illustration. A vailableintheDigitalTVmode. Pressthed.menubutton. Guide Now&NextGuide FullGuide ScheduledList DefaultGuide Preference
PreferredSubtitleLanguage PreferredAudioLanguage OSDLanguage TranslucencyLevel ParentalLock Feature Subtitle SubtitleLanguage AudioLanguage
DigitalText Channel AutoStore ManualStore EditFavouriteChannels ChannelManager System ProductInformation SignalInformation SoftwareUpgrade
CommonInterface Reset ModuleInformation Smartcardinformation Language SoftwareDownload On,Off English,Welsh,Gaelic,Irish
English,Welsh,Gaelic,Irish English,Deutsch,Italiano,Français,Svenska High,Medium,Low,Opaque ParentalRating ChangePIN Now/Next,FullGuide
Disable,Enable ApplicationInfo CIMenu T hesub-itemsoftheCIMenumayvarydependingontheCAMmodel.
Y oucanselecttheseoptionsbysimply pressingthed.menubuttononthe remotecontrol. updating the Channel list automatically You can update the channel list
when the broadcaster adds new Services or if you move the TV to a new location. 1. 2. 3. 4. Pressthed.menu buttontodisplaytheDTVmenu.
Presstheorbuttontoselect"Channel",thenpresstheenter Presstheenter buttonagain,toselect"AutoStore".
button. Whenithasfinished,thenumberofscannedserviceswillbedisplayed. Theexistingfavouritechannellistwillnotbedeletedwhenthechannellistisupdated.
buttonwith"STOP"selected. Tostopthescanbeforeithasfinished,presstheenter 5. Presstheexitbuttontoexit.
Ifthesignalstatusispoor,the"NoServicefound!Checktheaerialconnection"messageisdisplayed. English-9 updating the Channel list manually You can specify the
channel or frequency for a fast channel search. 1. 2.
3. 4. Pressthed.menu buttontodisplaytheDTVmenu. Presstheorbuttontoselect"Channel",thenpresstheenter to.
.. Moveto"Channel","Frequency",or"Bandwidth" Setthe"Channel",or"Bandwidth" Setthe"Frequency" button. button.
Presstheorbuttontoselect"ManualStore",thenpresstheenter then.
.. orbutton orbutton Numericbutton(0~9) ·Channel:Channel"2"to"68"insequencearedisplayedinUK.
·Frequency:ThefrequencyavailableintheChannelgroupisdisplayed. ·Bandwidth:Theavailablebandwidthsare7and8MHz. 5. 6.
Presstheredbuttontostartthescanfordigitalservices. Whenithasfinished,channelsareupdatedinthechannellist. Presstheexitbuttontoexit.
Youcaninputbypressingthebuttonontheremotecontrol. YoucannotchangeonlyFrequencyandwhenchangingachannel,theFrequencywillbe automaticallychanged.
editing Your Favourite Channels You can edit your favourite channels using the four colour buttons. 1. 2. 3. 4. 5. Pressthed.menu
buttontodisplaytheDTVmenu.
Presstheorbuttontoselect"Channel",thenpresstheenter Presstheorbuttontoselect"EditFavouriteChannels", thenpresstheenter button.
Presstheredbuttontodisplayallcurrentlystoredchannels. Presstheorbuttontoselectachannelyouwant.Presstheenter button. button.
A""iconisshownnexttotheselectedchannelandthechannelwillbeaddedtothe favouritechannellist. ·Toundo,presstheenter buttonagain. ·Select
all:Selectallchannelscurrentlydisplayed. ·Select none:Deselectallselectedchannels. ·Preview: Displays(a)currentlyselectedchannel(s).
TheFavoriteChannelssettingshavebeencompleted. 6. Presstheexitbuttontoexit. Add You can use this function when one or more favourite channels have been
selected. 1. 2. 3. 4. 5. Pressthed.
menu buttontodisplaytheDTVmenu. Presstheorbuttontoselect"Channel",thenpresstheenter Presstheorbuttontoselect"EditFavouriteChannels",
thenpresstheenter button. Presstheredbuttoninthe"EditFavouriteChannels"menu. Toaddmorechannels,refertothestep5onthepreviousdescription.
Ifyouwanttocheckthechanneltobestored,pressd.menubutton. button. Presstheexitbuttontoexit. ·To add all channels to the favourite channel list, press the red
button. · Toaddallchannelstothefavouritechannellist,presstheredbutton.
To · Toremoveallchannels,pressthegreenbutton. ·To remove all channels, press the green button. To ·Preview:Displays(a)currentlyselectedchannel(s). ·
PresstheCh mgrbuttontodisplaythefavouritechannelmanager. ·Press the Press English-20 Move 1.
2. 3. 4. 5. Pressthed.
menu buttontodisplaytheDTVmenu. Presstheorbuttontoselect"Channel",thenpresstheenter Presstheorbuttontoselect"EditFavouriteChannels",
thenpresstheenter button. Selecttherequiredchannelusingtheorbutton. Pressthegreenbutton. A" "iconisdisplayedontheleftsideofthechannelname. button. 6. 7.
Presstheorbuttontoselectthechannelthatyouwanttomove, andpressthegreenorenter button. Presstheexitbuttontoexit.
Preview 1. 2. Inthe"EditFavouriteChannels"menu, selectthechanneltobepreviewedbypressingtheorbutton.
You're reading an excerpt. Click here to read official SAMSUNG
LE32R73BD user guide
http://yourpdfguides.com/dref/469629
Presstheyellowbutton. Theselectedchannelisdisplayedonthescreen. Delete 1. 2. Inthe"EditFavouriteChannels"menu,selectthechanneltobedeleted
fromthefavouritechannelslistbypressingtheorbutton. Pressthebluebutton. Theselectedchannelandnumberwillbedeleted.
Toaddadeletedchannelbackintothefavouritechannellist,see"Add"onpage20. Selecting Channel manager You can exclude the channels you have chosen from
the channels you have scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not
specifically choose to skip are displayed during scanning. 1.
2. 3. 4. oucanselecttheseoptionsby Y Pressthed.menu buttontodisplaytheDTVmenu.
Presstheorbuttontoselect"Channel",thenpresstheenter button. button. Presstheorbuttontoselect"ChannelManager".Presstheenter
Yourfavouritechannelsareonlydisplayediftheywerepreviouslysetinthe "EditingYourFavouriteChannels"menu(refertopage20~2).
Presstheyellowbuttontotogglebetweenyourfavouritechannelsandallchannels. 5. 6. Presstheredorgreenbuttontodisplaythepreviousornextchannelmanagerpage.
Presstheorbuttontoselectachanneltobetuned. Presstheenter button.
hechannelnumber,nameandaniconaredisplayedinthetopleftcornerwhilechanging T
thechannel.Thechannelnumberandnamearedisplayedifthechannelisoneoftheall channels,andaiconifthechannelisoneofthefavouritechannels.
simplypressingtheCh mgr button ontheremotecontrol. 7. PresstheblueorCh mgrbuttontoexitfromthechannelmanager. English-2 displaying Programme
information While viewing a channel, additional information about the current programme may be displayed. 1. Whileviewingaprogramme,presstheinFo (
Theprogrammeinformationisdisplayed. )button. )button.
2. Toexitfrombannerinformation,presstheinFo ( Viewing the ePg (electronic Programme guide) information The EPG (Electronic Programme Guide)
information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel.
The display will dynamically update as soon as new information becomes available. Now & Next Guide For the six channels indicated in the left-hand
column, displays the Current programme and the Next programme information.
Full Guide Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be
scrolled forwards or backwards in time. 1. 2. 3.
4. Pressthed.menu buttontodisplaytheDTVmenu. Presstheenter button,toselect"Guide". Presstheorbuttontoselect"Now&NextGuide"or"FullGuide".
Presstheenter button. Youcanalsodisplaytheguidemenusimplybypressingtheguidebutton. to...
WatchaprogrammeintheEPGlist then... · electaprogrammebypressing S the,,,button. ·Presstheenter button.
Ifthenextprogramisselected,itisscheduledwiththeclockicondisplayed. Iftheenter buttonispressedagain,theschedulingiscanceledwiththeclock
icongone.Fordetailsaboutschedulingprogrammes,refertothenextpage. Viewprogrammeinformation · electaprogrammeofyourchoicebypressing S the,,,button. ·
resstheinFo ( P )buttonwhentheprogramme ofyourchoiceishighlighted.
Togglebetweenthe "Now&NextGuide"or"FullGuide" · resstheredbuttonrepeatedly. P Displaythe"Favourites"andthe"All · ressthegreenbuttonrepeatedly. P
Channels"list Scrollsbackwardsquickly(2hours). Scrollsforwardquickly(2hours). Exittheguide · resstheyellowbuttonrepeatedly.
P · ressthebluebuttonrepeatedly. P · resstheexitbutton. P Theprogrammetitleisontheupperpartofthescreencenter. PleaseclickoninFo (
)buttonforthedetailedinformation.ChannelNumber, RunningTime,StatusBar,ParentalLevel,VideoQualityInformation(HD/SD),
SoundModes,SubtitleorTeletext,LanguagesofSubtitleorTeletext,andbrief summaryofthehighlightedprogrammeareincludedonthedetailed information.
"..."willbeappearedifthesummaryislong. Sixchannelsaredisplayed. Toscrollbetweenchannels,movetoachannelusingtheorbutton. Todisplaypagebypage,usetheP
or button. English-22 using the Scheduled list If you make a scheduled viewing list of programs you may like to see, the channel will be automatically
switched to the scheduled program at the scheduled time even if you are watching another program. 1. 2.
3. 4. 5. Pressthed.menu buttontodisplaytheDTVmenu. Presstheenter button,toselect"Guide". button.
Presstheorbuttontoselect"ScheduledList",thenpresstheenter Presstheredbutton. Thechannelwillbeswitchedtothescheduledprogram. Presstheenter
buttontoselectanitemandadjustwiththeorbutton.
@@·Channel: Setthechannel. ·time: Setthetime. ·date: SetYear,MonthandDay. ·Frequency: Setthefrequency.("Once","Daily",or"Weekly") 6.
7. Aftersettingtheschedule,Presstheredbutton. Presstheexitbuttontoexit. TheScheduledlistmaybedisplayedintheEPGmenu. · Save:Savetheadjustedschedule.
·Cancle:Canceltheadjustedschedule. ·add Programme:Addanewschedule. ·edit:Re-adjusttheselectedschedule. ·delete:Deletetheselectedschedule. Setting the
default guide You can preset the default guide style. 1. 2. 3. 4. 5.
Pressthed.menu buttontodisplaytheDTVmenu. Presstheenter button,toselect"Guide". button. Presstheorbuttontoselect"DefaultGuide",thenpresstheenter
Select"Now/Next"or"FullGuide"usingtheorbutton, andpresstheenter button. Presstheexitbuttontoexit. Y oucanselecttheseoptions bysimplypressingtheguide
buttonontheremotecontrol. English-23 Viewing all Channels and Favourite Channels In the EPG menu, you can display all channels or favourite channels. 1.
2.
3. 4. 5. 6. 7.
8. Pressthed.menu buttontodisplaytheDTVmenu. Presstheenter buttonagain,toselect"Guide". Selecttheyourrequiredguide("Now&NextGuide"or"FullGuide")
bypressingtheorbutton.
Presstheenter button. Pressthegreenbutton. Allthechannellistsandthefavoritechannellistswillbetoggled.
Selectaprogrammeofyourchoicebypressingthe,,,orbutton. PresstheinFo ( )buttontodisplayinformationaboutthehighlightedprogramme.
WhentheEditFavouriteChannelslisthasnotbeensetup: · "Thefavouriteslistisempty. Wouldyouliketochooseyourfavouritesnow?"messageisdisplayed. ·
Select"Yes". The"EditFavouriteChannels"menuisdisplayed. Ifyouselect"No",allchannelswillremainunchanged.
· To edit the favourite channels, refer to page 20 for more details. Toeditthefavouritechannels,refertopage20formoredetails.
"AllChannels"isthelistofchannelsthathavebeenscannedbythechannellistupdate. Allchannelsaredisplayedintheallchannelmode.
"Favourites"(favouritechannels)isthelistofchannelsthathasbeensetinthe "EditFavouriteChannels"menu(refertopage20). 9. Presstheexitbuttontoexit. Setting the
Preferred languages Using this feature, users can select one of the four languages (English, Welsh, Gaelic, Irish).
You're reading an excerpt. Click here to read official SAMSUNG
LE32R73BD user guide
http://yourpdfguides.com/dref/469629
The language selected here is the default when the user selects a channel. 1.
2. 3. 4. Pressthed.menu buttontodisplaytheDTVmenu.
Presstheorbuttontoselect"Preference",thenpresstheenter Presstheorbuttontoselect"PreferredSubtitleLanguage"or "PreferredAudioLanguage".Presstheenter
button. Selecttherequiredoptionbypressingtheorbutton,andpress theenter buttontochangethesetting. · Preferred Subtitle language:English,Welsh,Gaelic,Irish ·
Preferred audio language:English,Welsh,Gaelic,Irish button. Ifyouchangethelanguagesetting,the"SubtitleLanguage"andthe"AudioLanguage"of
thefeaturesmenu(refertopage26)areautomaticallychangedtotheselectedlanguage.
he"SubtitleLanguage"andthe"AudioLanguage"ofthefeaturesmenushowalistof T languagessupportedbythecurrentchannelandtheselectionishighlighted.
Ifyouchangethislanguagesetting,thenewselectionisonlyvalidforthecurrentchannel.
Thechangedsettingdoesnotchangethesettingofthe"PreferredSubtitleLanguage" orthe"PreferredAudioLanguage"ofthepreferencemenu. 5.
Presstheexitbuttontoexit. English-24 Choosing Your language When you start using your set for the first time, you must select the language which will be used
for displaying menus and indications. 1. 2. 3. 4.
5. Pressthed.menu buttontodisplaytheDTVmenu. Presstheorbuttontoselect"Preference",thenpresstheenter
Presstheorbuttontoselect"OSDLanguage",thenpresstheenter Selectaparticularlanguagebypressingtheorbuttonrepeatedly. Presstheenter button.
Youcanchooseoneoffivelanguages. button. button. Presstheexitbuttontoexit. adjusting the translucency level You can set the translucency of the menu.
1. 2. 3. 4. 5.
Pressthed.menu buttontodisplaytheDTVmenu. Presstheorbuttontoselect"Preference",thenpresstheenter Presstheorbuttontoselect"TranslucencyLevel",
thenpresstheenter button. Selecttherequiredoption("High","Medium","Low",or"Opaque")bypressing theorbutton,andpresstheenter buttontochangethesetting.
Presstheexitbuttontoexit.
button. Setting up the Parental lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a
4-digit PIN (Personal Identification Number) code that is defined by the user. The on-screen menu will instruct you to assign a PIN code (you can change it
later, if necessary). 1. 2. 3. 4. 5. Pressthed.menu buttontodisplaytheDTVmenu.
Presstheorbuttontoselect"Preference",thenpresstheenter Presstheorbuttontoselect"ParentalLock.",thenpresstheenter The"EnterPIN"isdisplayed.
Enteryourcurrent4-digitPINcodebyusingthenumericbuttons(0~9). Theoptionsavailableinthe"ParentalLock"grouparedisplayedwiththe
"ParentalRating"selected. ThedefaultPINcodeforanewTVsetis0000. IfyouenteraninvalidPINcode,the"InvalidPINcode.Pleasetryagain." messageisdisplayed.
button. button.
6. 7. 8. Presstheenter button. Presstheorbuttontoselecttheageratingyouwanttolockout.
Presstheenter button. IfyouwanttochangethePINcode,select"ChangePIN"bypressing theorbutton.Presstheenter button. The"EnterNewPIN"isdisplayed. 9.
EnteryournewPINcodebyusingthenumericbuttons(0~9). The"ConfirmNewPIN"isdisplayed. TheYourPINcodehasbeenchangedsuccessfullymessageisdisplayed.
10. Re-enteryournewPINcodetoconfirmbyusingthenumericbuttons(0~9). 11. Presstheenter button. 12. Presstheexitbuttontoexit.
IfyouforgetthePINcode,presstheremotecontrolbuttonsinthefollowingsequence,which resetsthePINto0-0-0-0: PoWer (off), mute, 8, 2, 4, PoWer (on).
English-25 Setting the Subtitle You can activate and deactivate the subtitles. 1. 2. 3. 4. 5. Pressthed.menu buttontodisplaytheDTVmenu.
Presstheorbuttontoselect"Feature",thenpresstheenter Presstheenter buttonagain,toselect"Subtitle". button.
Select"On"bypressingtheorbutton.Presstheenter Presstheexitbuttontoexit. button. Selecting the Preferred language (Subtitle or audio) You can change the
default value for subtitle and audio languages. Displays the language information for the incoming stream.
1. 2. 3. 4. 5.
Pressthed.menu buttontodisplaytheDTVmenu. Presstheorbuttontoselect"Feature",thenpresstheenter Presstheorbuttontoselect"SubtitleLanguage"or
"AudioLanguage".Presstheenter button. Selecttherequiredoptionbypressingtheorbutton,andpressthe enter buttontochangethesetting. Presstheexitbuttontoexit.
Whileviewingaprogramme,thesubtitlecanbeselected. Whileviewingaprogramme,audiolanguagescanbeselected. button.
Englishisthedefaultincaseswheretheselectedlanguageisunavailableinthebroadcast.
Setting the digital text If the programme is broadcast with digital text, this feature is enabled. 1. 2. 3. 4. 5. Pressthed.menu buttontodisplaytheDTVmenu.
Presstheorbuttontoselect"Feature",thenpresstheenter Presstheorbuttontoselect"DigitalText",thenpresstheenter
Select"Disable"or"Enable"bypressingtheorbutton. Presstheexitbuttontoexit.
M HEG(MultimediaandHypermediaInformationCodingExpertsGroup)AnInternational
standardfordataencodingsystemsusedinmultimediaandhypermedia.Thisisatahigherlevel thantheMPEGsystemwhichincludesdatalinkinghypermediasuchasstillimages,character service,animation,graphicandvideofilesaswellasmultimediadata.MHEGisuserruntime
interactiontechnologyandisbeingappliedtovariousfieldsincludingVOD(Video-On-Demand), ITV(InteractiveTV),EC(ElectronicCommerce),tele-education,teleconferencing,digital librariesandnetworkgames. button. button.
Viewing Product information You can view your product information. For service or repair, please contact a Samsung approved dealer. 1. 2. 3.
Pressthed.menu buttontodisplaytheDTVmenu. Presstheorbuttontoselect"System",thenpresstheenter Presstheenter buttonagain,toselect"ProductInformation". T
heProductInformationmenuisselected. -SoftwareVersion,FirmwareVersion button. 4. Presstheexitbuttontoexit. English-26 Checking the Signal information
You can get information about the signal status. 1. 2.
3. 4. Pressthed.menu buttontodisplaytheDTVmenu. Presstheorbuttontoselect"System",thenpresstheenter Presstheorbuttontoselect"SignalInformation",
thenpresstheenter button. Presstheexitbuttontoexit. I fthesignalstatusispoor,the"Nosignal."messageisdisplayed. button. upgrading the Software (option) To
keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as part of the normal Television signal.
It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade. Upgrade Now If you select
"Upgrade Now", the "iDTV" immediately installs the new upgrade and then restarts. Upgrade Later If you select "Upgrade Later", the upgrade is postponed
until the next restart or channel change some 90 minutes later, when the upgrade dialog appears again.
You're reading an excerpt. Click here to read official SAMSUNG
LE32R73BD user guide
http://yourpdfguides.com/dref/469629
Don't Upgrade If you select "Don't Upgrade", the "iDTV" does not perform the upgrade and the software upgrade banner is not displayed again.
The upgrade is still stored internally, to subsequently upgrade to the new version then the following sequence of steps are performed. 1. 2. 3. 4.
5. Pressthed.menu buttontodisplaytheDTVmenu. Presstheorbuttontoselect"System",thenpresstheenter Presstheorbuttontoselect"SoftwareUpgrade",
thenpresstheenter button. Toswitchtoanalternativeversion,presstheredbutton. Pressthebluebuttontoreset,activatetheupgradeandrestart.
Presstheexitbuttontoexit. button. Viewing Common interface This contains information on CAM inserted in the CI slot and displays it. 1.
2. 3. 4. 5. Pressthed.menu buttontodisplaytheDTVmenu. Presstheorbuttontoselect"System",thenpresstheenter Presstheorbuttontoselect"CommonInterface",
thenpresstheenter button. Presstheenter buttontodisplaytheinformationforyourapplication. Presstheexitbuttontoexit.
TheApplicationInfoinsertingisabouttheCICARD.
YoucaninstalltheCAManytimewhethertheTVisONorOFF. 1. PurchasetheCICAMmodulebyvisitingyournearestdealerorbyphone. 2.
InserttheCICARDintotheCAMinthedirectionofthearrowuntilitfits.
3. InserttheCAMwiththeCICARDinstalledintothecommoninterfaceslot. (InserttheCAMinthedirectionofthearrow,rightuptotheendsothatitisparallelwiththeslot.)
4.Checkifyoucanseeapictureonascrambledsignalchannel.
button. English-27 Selecting the Ci (Common interface) menu This enables the user to select from the CAM-provided menu. 1. 2. 3. 4. 5. 6. Pressthed.menu
buttontodisplaytheDTVmenu.
Presstheorbuttontoselect"System",thenpresstheenter Presstheorbuttontoselect"CommonInterface", thenpresstheenter button.
Selectto"CIMenu"bypressingtheorbutton,andpresstheenter Selecttherequiredoptionbypressingtheorbutton, andpresstheenter button. Presstheexitbuttontoexit.
SelecttheCIMenubasedonthemenuPCCard. button. button. resetting You can reset the values stored to the factory default values.
TheResetoperationdeletesallchannelinformationanduserpreferencesreturning allvaluestotheirdefaultfactorystate. 1. 2.
3. 4. 5. Pressthed.menu buttontodisplaytheDTVmenu.
Presstheorbuttontoselect"System",thenpresstheenter Presstheorbuttontoselect"Reset",thenpresstheenter The"EnterPIN"screenwillappear.
Enteryourcurrent4-digitPINcodebyusingthenumericbuttons(0~9). Thewarningmessageisdisplayed.Allvalueswillberesetbypressingthe
colouredbuttons(red,green,yellow,andblue)inturn. button.
button. 6. Presstheexitbuttontoexit. teletext decoder Most set channels carry " teletext ", pages of written information that provide information such as: T
elevision programme times. N ews bulletins and Weather forecasts. S ports results. Subtitles for the hard of hearing. The teletext pages are organized
according to six categories: Part a B C d e F Contents Selectedpagenumber. Broadcastingstationidentity. Currentpagenumberorsearchstatus.
Dateandtime. Text. Statusinformation. English-28 displaying the teletext information You can display teletext information at any time, but signal reception
must be good. Otherwise: Information may be missing. S ome pages may not be displayed. To activate the teletext mode and display the contents page: 1. 2.
singtheP ( U teletextservice. )orP ( )button,selectthechannelprovidingthe ressthettx/mix( P )buttontoactivatetheteletextmode.
T hecontentspageisdisplayed.Itcanberedisplayedatanytimebypressingthe menu( )button. 3. ressthettx/mix( P )buttonagain. T
heactualbroadcastwillbedisplayedwith"Teletext","Double",and"Mix"inorder onthescreen.
4. ressthetV/dtVbuttontoexitfromtheTextdisplay. P I fanybrokencharacterappearswhileTextisbeingviewed,makesurethattheTextlanguageis
identicalwiththelanguageinthe"Setup"menumode.Ifbothlanguagesaredifferent,selectthe samelanguagewiththeTextlanguageonthe"Setup"menu. Selecting a
Specific teletext Page Press the number buttons on the remote control to enter the page number directly: 1.
nterthethree-digitpagenumberlistedinthecontentsbypressingthe E correspondingnumericbuttons. 2.
ftheselectedpageislinkedwithseveralsecondarypages,thesecondarypages I aredisplayedinsequence.Tofreezethedisplayonagivenpage, pressthePiP (
).PressthePiP ( )buttonagaintoresume. 3. Usingthevariousdisplayoptions: to display... Bothteletextinformationandthenormalbroadcast
Hiddentext(answerstoquizgames,forexample) Thenormalscreen Asecondarypage,byenteringits4-digitnumber Thenextpage Thepreviouspage Doublesizelettersinthe: Upperhalfofthescreen Lowerhalfofthescreen Normalscreen Press the.
.. ttx/mix ( inFo ( inFo ( ) ) ) ) Pre-Ch ( P P ( ( ) ) P.mode ( Once Twice ) Threetimes English-29 using Fastext to Select a teletext Page The various topics
included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control. 1. 2. 3. 4.
isplaytheteletextcontentspagebypressingthettx/mix( D )button. ressthecolouredbuttoncorrespondingtothetopicthatyouwishtoselect(The P
availabletopicsarelistedonthestatusinformationline).
PresstheRedbuttontodisplaythepreviouspage. PresstheGreenbuttontodisplaythenextpage. ressthetV/dtVbuttontoexitfromtheTextdisplay. P Setting up Your PC
Software (Based on Windows xP) The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different
depending upon your particular version of Windows and your particular video card.
Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or
Samsung Dealer.) 1. First,clickon"ControlPanel"ontheWindowsstartmenu. 2.
Whenthecontrolpanelwindowappears,clickon"AppearanceandThemes"andadisplay dialog-boxwillappear. 3.
Whenthecontrolpanelwindowappears,clickon"Display"andadisplaydialog-boxwillappear. 4. Navigatetothe"Settings"tabonthedisplaydialog-box.
Thecorrectsizesetting(resolution):Optimum-360X768 I favertical-frequencyoptionexistsonyourdisplaysettingsdialogbox,thecorrectvalueis
"60"or"60Hz".Otherwise,justclick"OK"andexitthedialogbox. display modes Both screen position and size will vary depending on the type of PC monitor and
its resolution. The resolutions in the table are recommended. (All resolutions between the supported limits are supported) mode iBm VeSa resolution 640x480
720x400 640x480 640x480 800x600 800x600 800x600 024x768 024x768 024x768 360x768 horizontal Frequency (khz) 3.
469 3.469 37.86 37.500 37.879 48.077 46.875 48.364 56.476 60.023 47.
72 Vertical Frequency (hz) 59.940 70.087 72.809 75.000 60.
37 72.88 75.000 60.000 70.069 75.
029 60.05 Pixel Clock Frequency (mhz) 25.75 28.322 3.500 3.500 40.000 50.000 49.500 65.000 75.
000 78.750 85.800 Sync Polarity (h/V) -/- -/+ -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+ Theinterfacemodeisnotsupported. Thesetmightoperateabnormallyifanonstandardvideoformatisselected.
You're reading an excerpt. Click here to read official SAMSUNG
LE32R73BD user guide
http://yourpdfguides.com/dref/469629
Powered by TCPDF (www.tcpdf.org)
Download PDF