LX SERIES DISHMACHINE LX SERIES DISHMACHINE

Item # ________________________________
Quantity _______________________________
C.S.I. Section 11400
LX SERIES
DISHMACHINE
FOOD EQUIPMENT
STANDARD FEATURES
❑ LX18
❑ LX30
❑ LX18C
❑ LX30C
❑ LX40C
❑ LX18H
❑ LX30H
❑ LX40H
VOLTAGE
❑ 120/60/1
❑ 208/60/1
❑ 240/60/1
❑ 120/208 (3W)/60/1
❑ 120/240 (3W)/60/1
OPTIONS AT EXTRA COST
❑
❑
❑
❑
❑
❑
❑
❑
❑
208 (2W)/60/1
❑ 240/60/3
240 (2W)/60/1
❑ 480/60/3
208/60/3
❑ 380-400/60/3
Detergent pump – LX18 and LX30 series
Detergent and rinse aid pumps – LX18 and
LX30 series
40°F rise booster heater, 3 wire electric only
(LX30C)
70°F rise booster heater (LX30H only)
50 Hz (contact local Hobart representative for
available voltages)
Rinse aid pump (LX40 series)
ACCESSORIES
❑
❑
❑
❑
❑
❑
❑
Power cord kit (LX18H, LX30H, LX40H only)
Stainless steel base with 6" legs
17" stainless steel stand
Pressure regulator valve
24" x 1⁄2" top trim strip
Rolled edge top, freestanding units only
Drain water tempering kit
Specifications, Details and Dimensions on Inside and Back.
R
701 S Ridge Avenue, Troy, OH 45374 • 937-332-3000 • 1-800-333-7447
LX SERIES DISHMACHINE
❑ LX18 SERIES:
■ Fresh water rinse
■ Fill and dump machine (LX18, LX18C)
■ Modified fill and dump machine (LX18H)
❑ LX30 SERIES:
■ Fresh water rinse
■ Chemical connection capability
❑ LX40 SERIES:
■ Fresh water rinse
■ Three cycle-time selections
■ Manager programming
■ Standard detergent pump
■ 70°F rise booster heater standard on
heavy cycle setting
■ Standard auto chemical pump prime
■ Standard service diagnostics
■ Standard auto delime notification
and cycle
■ Auto low chemical alert
❑ ALL SERIES:
■ Stainless steel construction for industrial
strength and durability
■ Solid state controls
■ Automatic pumped drain
■ 17" chamber height accepts 16" x 18"
trays
■ Debossed non-clogging wash arms with
clean-out plugs
■ Heavy-duty door, hinges and tank
■ Door gaskets not required
■ Top-mounted, slide-out controls
■ Large, removable stainless steel scrap
screen
■ Trim panels not required
■ Heavy-duty 3⁄4 H.P. motor
■ Door interlock switch
■ Corrosion-proof pump
■ Automatic fill
■ Two dishracks – one peg and one combination rack
■ Available in hot water or chemical sanitizing models
MODELS
LX SERIES
DISHMACHINE
WARNING:
REQUIRED FLOWING WATER PRESSURE
TO THE DISHMACHINE IS 20 ± 5 PSIG. IF
PRESSURES HIGHER THAN 25 PSIG ARE
PRESENT, A PRESSURE REGULATING VALVE
MUST BE INSTALLED IN THE WATER LINE TO
THE DISHMACHINE (BY OTHERS).
IMPORTANT: THE SODIUM HYPOCHLORITE
(LIQUID BLEACH) CONTAINER SHOULD BE
PLACED NO HIGHER THAN 10" ABOVE FLOOR.
IF BLEACH CONTAINER IS TO BE PLACED IN
CABINET ADJACENT TO MACHINE, A 1⁄2" DIA.
HOLE IS REQUIRED IN THE CABINET TO RUN
BLEACH SUPPLY LINE.
USE ONLY 5.2% OR 8.4% SODIUM HYPOCHLORITE (LIQUID BLEACH) AS SANITIZING
CHEMICAL TO INSURE PROPER OPERATION
OF DISHMACHINE.
DO NOT PRE-MIX WETTING AGENT AND
SODIUM HYPOCHLORITE (LIQUID BLEACH).
CERTAIN MATERIALS INCLUDING SILVER
PLATE, ALUMINUM AND PEWTER ARE
ATTACKED BY SODIUM HYPOCHLORITE (LIQUID
BLEACH). SEE INSTRUCTION MANUAL.
NOTES:
1. ALL VERTICAL MACHINE DIMENSIONS
TAKEN FROM FLOOR MAY BE INCREASED
BY 1".
2. MOIST AIR ESCAPES FROM THE DOOR. USE
ONLY MOISTURE RESISTANT MATERIALS
ADJACENT TO LX SIDES AND TOP.
PLUMBING NOTES:
1. WATER HAMMER ARRESTOR (MEETING
ASSE-1010 STANDARD OR EQUIVALENT)
TO BE SUPPLIED (BY OTHERS) IN COMMON WATER SUPPLY LINE AT SERVICE
CONNECTION.
2. RECOMMENDED WATER HARDNESS TO
BE 4-6 GRAINS FOR BEST RESULTS.
3. MINIMUM WATER CONDUCTIVITY REQUIRED
- 30 MICRO-MHOS/CM.
4. IF DRAIN HOSE IS LOOPED ABOVE A SINK,
THE LOOP MUST NOT EXCEED 38" AFF.
FOOD EQUIPMENT
LX SERIES
DISHMACHINE
FOOD EQUIPMENT
WARNING
ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY
WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL
CODE AND/OR OTHER LOCAL ELECTRICAL CODES.
CONNECTION INFORMATION
(*AFF - ABOVE FINISHED FLOOR)
PLUMBING CONNECTIONS MUST COMPLY WITH APPLICABLE
SANITARY, SAFETY AND PLUMBING CODES. DRAIN AND FILL LINE
CONFIGURATIONS VARY, SOME METHODS ARE SHOWN ON THIS
DRAWING.
LEGEND
E1
ELECTRICAL CONNECTION: 13⁄8" DIA. HOLE FOR 1" TRADE SIZE
CONDUIT; 313⁄4" AFF.
P1
SINGLE FILL AND RINSE CONNECTION: 3⁄4" FEMALE GARDEN
HOSE FITTING ON 6' LONG HOSE SUPPLIED WITH MACHINE;
140°F WATER MIN.; 180°F WATER MIN. FOR LX18/LX30;
11⁄2" AFF.
SHIPPING WEIGHTS (LBS)
DRAIN CONNECTION: 3⁄4" MPT FITTING WITH 6' LONG HOSE
SUPPLIED WITH MACHINE; 39⁄16" AFF.
NET WEIGHT OF MACHINE
DOMESTIC SHIPPING WEIGHT
P2
LX18/LX18C
LX30/LX30C
LX40C
190
235
LX18H
LX30H
LX40H
210
255
MIN•
AWG
WIRE
RATED
AMPS
MIN SUPPLY
CKT CONDUCT
AMPACITY
MAX
PROTECTIVE
DEVICE
120/60/1
120/60/1
120/60/1
12
12
12
13.3
14.4
15.3
20
20
20
20
20
20
LX18, LX18C
208/60/1, 240/60/1
14
7.6
15
15
LX18H
LX30, LX30C, LX40C
LX30H, LX40H
208/60/1, 120/208 (3W)/60/1 ••
208/60/1, 120/208 (3W)/60/1 ••
208/60/1, 120/208 (3W)/60/1 ••
8
12
8
41.3
14.8
43.6
50
20
50
50
20
50
LX18H
LX30H, LX40H
LX30, LX30C, LX40C
240/60/1, 120/240 (3W)/60/1 ••
240/60/1, 120/240 (3W)/60/1 ••
240/60/1, 120/240 (3W)/60/1 ••
8
8
12
36.8
38.9
13.9
50
50
20
50
50
20
LX30H
208/60/3
240/60/3
480/60/3
380-400/60/3
8
8
12
12
31.2
27.6
13.8
15.4-16.0
40
35
20
20
40
35
20
20
•• THE (3W) SYSTEMS REQUIRE
THREE POWER WIRES WHICH
INCLUDE A CURRENT
CARRYING NEUTRAL. AN
ADDITIONAL FOURTH WIRE
MUST BE PROVIDED FOR
MACHINE GROUND.
LX30C W/BOOSTER
120/208(3W)/60/1
120/240(3W/60/1
8
8
43.6
38.9
50
50
50
50
OPTIONAL CORD KIT AVAILABLE
FROM HOBART ON LX18H, LX30H
AND LX40H MODELS
MACHINE
TYPE
LX18, LX18C
LX30
LX30C, LX40C
ELECTRICAL
SPECIFICATION
• USE 90° C STRANDED COPPER
WIRE ONLY. USE MIN AWG PER
ABOVE CHART.
LX SERIES
DISHMACHINE
FOOD EQUIPMENT
SPECIFICATIONS
DESIGN: Front opening, equipped for installation of both
freestanding and undercounter-type operations.
RINSE AND SANITATION:
• LX18H, LX30H, LX40H: Sanitation is accomplished by
means of a built-in booster heater designed to raise
temperature of water to a minimum of 180°F from an
incoming water temperature of 140°F (110°F for LX30H
and LX40H on heavy cycle setting with 70°F rise
booster heater ratings).
CONSTRUCTION: 304 series stainless steel tank, door
and top panel.
PUMP: Centrifugal-type, integral with motor, horizontally
mounted. Pump capacity 54 gpm.
MOTOR: 3⁄4" H.P., single phase, split-phase type, furnished for 120/60/1 or 208 or 240/60/1 electrical specification. Factory sealed lubrication. Inherent overload protection with auto reset. 3-phase and 50 Hz available. Contact
your local Hobart Representative.
WASH AND RINSE CYCLE: Complete automatic type,
controlled by solid-state electronics. Cycle may be
interrupted any time by opening door. Cycle continues
when door is closed.
PUMPED DRAIN: Machine automatically drains water
through a built-in pump. Maximum 17" drain height
permitted.
• LX18 and LX18C: Fill and dump model.
• LX18H: Modified fill and dump model. Wash water is
drained after every wash cycle. Fresh water rinse water
is retained for use in the next wash cycle.
• LX30 and LX40: Initial cycle fills wash tank, to be
recirculated each wash cycle. Some wash water is
drained off before rinse cycle. Rinse cycle refreshes
wash water and tank heat.
MACHINE RATINGS
LX18
LX18C
• LX18C, LX30C, and LX40C: Sanitation is accomplished by injection of proper amount of sodium
hypochlorite solution (liquid bleach) into final rinse
water to achieve a minimum of 50PPM sanitizing
solution. Injection of sodium hypochlorite is accomplished by a built-in sanitizing chemical pump.
RACKING: Machines accommodate racks from 10" x 20"
to 20" x 20". Also accepts 16" x 18" cafeteria trays.
CAUTION: Certain materials, including silver, aluminum
and pewter are attacked by Sodium Hypochlorite solution
in the chemical sanitizing mode of operation.
SPECIFICATIONS: Listed by Underwriters Laboratories
Inc. and NSF International.
As continued product improvement is a policy of Hobart Corporation,
specifications are subject to change without notice.
LX18H
LX30
NORMAL CYCLE -
LX30C
LX30H
LX40C
LX40H
EXTENDED CYCLE
Racks per Hour Rate
18
18 - 12
30
20 - 30 - 40
Dishes per Hour (25 per Rack Avg.)
450
450 - 300
750
1000 MAX
Glasses per Hour (36 per Rack Avg.)
648
648 - 432
1080
1440 MAX
Wash Motor - H.P.
➤
Controls
Tank Capacity - Gallons
Overall Dimensions - H x W x D
⁄4
➤
➤
Solid State
➤
➤
3
➤
➤
333⁄4" x 2315⁄16" x 263⁄4"
3
➤
N/A
Electric Booster Heater
N/A
7 KW
N/A
Water Usage Per Rack - Gallons
5.2
2.6 - 5.2
➤
➤
1.5 KW
2
Optional
➤
➤
Tank Heat
3.3 - 5
➤
3.3
➤
Cycle Time - Minutes
1.5 - 2 - 3
➤
6 KW
N/A
6 KW
➤
1.2
➤
Pumped
➤
➤
17"
➤
➤
Standard
Drain Design
Chamber Height
Chemical Connection Capability
Detergent Pump
➤
Rinse-Aid Pump
➤
Sanitizer Pump
➤
Peak Drain Flow - GPM
Service Diagnostics
➤
➤
70° Rise Booster
Standard
N/A
N/A
Standard
➤
Optional (W Det Pump)
N/A
Chemical Prime
➤
➤
Optional
Standard
N/A
N/A
Optional
Standard
N/A
➤
Standard
➤
Standard
➤
10
N/A
N/A
➤
Optional
N/A
➤
701 S Ridge Avenue, Troy, OH 45374 • 937-332-3000 • 1-800-333-7447
F-8193 (4/00)
LITHO IN U.S.A. (H-01)
Printed On Recycled Paper
Download PDF