Integrated High Definition LED TV/DVD Combination

Integrated High Definition
LED TV/DVD Combination
User’s Guide:
24V4210U
If you need assistance:
Toshiba's Support Web site support.toshiba.com
Call Toshiba Customer Support Center:
Within the United States at (800) 631-3811
Outside the United States at (949) 583-3050
For more information, see “Troubleshooting” on page 147 in this guide.
Owner's Record
The model number and serial number are on the back and side of your TV.
Record these numbers in the spaces below. Refer to these numbers whenever you
communicate with your Toshiba dealer about this LED TV/DVD combination.
Model number: ______________________________________________
Serial number: _______________________________________________
Note: To display a High Definition
picture, the TV must be receiving a
High Definition signal (such as an overthe-air High Definition TV broadcast, a
High Definition digital cable program, or
a High Definition digital satellite
program). For details, contact your TV
antenna installer, cable provider, or
GMA300010012
2/12
2
Dear Customer,
Thank you for purchasing this Toshiba LED TV. This
manual will help you use the many exciting features of
your new LED TV/DVD combination. Before operating
your LED TV/DVD combination, carefully read this
manual completely.
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat
Panel Display
Congratulations on your purchase! As you enjoy your
new product, please keep these safety tips in mind:
The Issue
• The home theater entertainment experience is a growing trend
and larger flat panel displays are popular purchases. However,
flat panel displays are not always supported on the proper stands
or installed according to the manufacturer’s recommendations.
• Flat panel displays that are
inappropriately situated on dressers,
bookcases, shelves, desks,
speakers, chests or carts may fall
over and cause injury.
TOSHIBA Cares!
• The consumer electronics industry
is committed to making home
entertainment enjoyable and safe.
Tune Into Safety
WARNING
To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions. See item 26) on page 4.
WARNING: If you decide to wall mount this
television, always use a mounting bracket that has
been Listed by an independent laboratory (such as
UL, CSA, ETL) and is appropriate for the size and
weight of this television. The use of inappropriate or
non-Listed mounting brackets could result in serious
bodily injury and/or property damage. See “To
Display your LED TV/DVD combination using a Wall
Bracket:” on page 5.
NOTE TO CATV INSTALLERS
This is a reminder to call the CATV system installer’s
attention to Article 820-40 of the U.S. NEC, which
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical. For
additional antenna grounding information, see 33) and
34) on page 4.
• One size does NOT fit all. Follow the manufacturer’s recommendations
for the safe installation and use of your flat panel display.
• Carefully read and understand all enclosed instructions for
proper use of this product.
• Don’t allow children to climb on or play with furniture and
television sets.
• Don’t place flat panel displays on furniture
that can easily be used as steps, such
as a chest of drawers.
• Remember that children can
become excited while watching a
program, especially on a “larger
than life” flat panel display. Care
should be taken to place or install
the display where it cannot be
pushed, pulled over, or knocked down.
• Care should be taken to route all cords and
cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
Wall Mounting: If you decide to wall mount your
flat panel display, always:
• Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory (such
as UL, CSA, ETL).
• Follow all instructions supplied by the display and wall mount
manufacturers.
• If you have any doubts about your ability to safely install your
flat panel display, contact your retailer about professional
installation.
• Make sure that the wall where you are mounting the display is
appropriate. Some wall mounts are not designed to be mounted
to walls with steel studs or old cinder block construction. If you
are unsure, contact a professional installer.
• A minimum of two people are
required for installation. Flat panel
displays can be heavy.
3
Important Safety Instructions
1)
2)
3)
4)
glass and a toxic liquid. If the liquid comes in
contact with your mouth or eyes, or your skin is
cut by broken glass, rinse the affected area
thoroughly with water and contact your doctor
immediately.
• ALWAYS contact a service technician to inspect
the TV any time it has been damaged or
dropped.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of
the polarized or grounding type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by
the manufacturer.
12) Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from
tip-over.
13) Unplug this apparatus during lightning storms
or when unused for long periods of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.
Additional Safety Precautions
14a) CAUTION: If the TV is dropped and the cabinet or
enclosure surface has been damaged or the TV
does not operate normally, take the following
precautions:
• ALWAYS turn off the TV and unplug the power
cord to avoid possible electric shock or fire.
• NEVER allow your body to come in contact with
any broken glass or liquid from the damaged
television. The LCD panel inside the TV contains
15) CAUTION:
• To reduce the risk of electric shock, do not use
the polarized plug with an extension cord,
receptacle, or other outlet unless the blades can
be inserted completely to prevent blade
exposure.
• To prevent electric shock, match wide blade of
plug to wide slot; fully insert.
16) CAUTION:
Do not let children swallow any small parts
included on or with the product or play with the
plastic bag. Keep the small parts and the plastic
bag out of the reach of children.
17) CAUTION:
Do not let water or other liquids come into contact
with the product, as it may result in damage.
18) WARNING:
• To prevent the spread of fire, keep candles or
other open flames away from this product at all
times.
• Keep the product away from direct sunlight, fire
or a heat source such as a heater. This may
reduce the product lifetime or result in fire.
• The mains plug is used as the disconnect
device, and therefore install the LED TV/DVD
combination near the wall outlet so that the
mains plug can be accessed easily at all times.
Installation, Care, and Service
Installation
Follow these recommendations and precautions and
heed all warnings when installing your TV:
19)
WARNING: NEVER expose the
batteries to excessive heat such
as sunshine, fire, or the like.
20) ALWAYS plug the product into an outlet that is
located in such a manner that it can be easily
unplugged in case the product requires service.
21) NEVER route the product’s power cord inside a
wall or similar enclosed area.
22) Never modify this equipment. Changes or
modifications may void: a) the warranty, and b) the
user’s authority to operate this equipment under
the rules of the Federal Communications
Commission.
4
23)
DANGER: RISK OF
SERIOUS PERSONAL
INJURY, DEATH, OR
EQUIPMENT DAMAGE!
Never place the TV on an unstable
cart, stand, or table. The TV may
fall, causing serious personal injury,
death, or serious damage to the TV.
24) When selecting a location for the TV,
• NEVER allow any part of the TV to hang over
the edge of the supporting furniture,
• NEVER place the TV on tall furniture (for
example, entertainment centers or bookcases)
without anchoring both the furniture and the TV
to a suitable support,
• Never place cloth or other material between the
TV and the supporting furniture,
• NEVER allow children to climb on the TV.
34)
DANGER: RISK OF SERIOUS
PERSONAL INJURY OR DEATH!
• Use extreme care to make sure you are never in
a position where your body (or any item you are
in contact with, such as a ladder or screwdriver)
can accidentally touch overhead power lines.
Never locate the antenna near overhead power
lines or other electrical circuits.
• Never attempt to install any of the following
during lightning activity: a) an antenna system;
or b) cables, wires, or any home theater
component connected to an antenna or phone
system.
25) To avoid damage to this product, never place or
store the TV in direct sunlight; hot, humid areas; or
areas subject to excessive dust or vibration.
26) Always place the TV on the floor or a sturdy, level,
stable surface that can support the weight of the
unit.
27) The product shall not be exposed to dripping or
splashing, and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
28) Never block or cover the slots or openings in the
TV cabinet back, bottom, and sides. Never place
the TV:
• on a bed, sofa, rug, or similar surface;
• too close to drapes, curtains, or walls; or
• in a confined space such as a bookcase, built-in
cabinet, or any other place with poor ventilation.
The slots and openings are provided to protect the
TV from overheating and to help maintain reliable
operation of the TV. Leave a space of at least 4
(four) inches around the TV.
29) Always leave a space of at least 4 (four) inches
around the TV. The slots and openings are
provided to protect the TV from overheating and to
help maintain reliable operation of the TV.
30) Never allow anything to rest on or roll over the
power cord, and never place the TV where the
power cord is subject to wear or abuse.
31) Never overload wall outlets and extension cords.
32) Always operate this equipment from a 120V AC,
60Hz power source.
33) Always make sure the antenna system is properly
grounded to provide adequate protection against
voltage surges and built-up static charges (see
Section 810 of the National Electric Code).
Care
For better performance and safer operation of your
TOSHIBA TV, follow these recommendations and
precautions:
35) If you use the TV in a room whose temperature is
32° F (0° C) or below, the picture brightness may
vary until the LCD warms up. This is not a sign of
malfunction.
36)
WARNING: RISK OF SERIOUS
PERSONAL INJURY, DEATH, OR
EQUIPMENT DAMAGE!
• Never use chemicals (such as air fresheners,
cleaning agents, etc.) on or near the TV
pedestal. Studies indicate that plastics may
weaken and crack over time from the combined
effects of chemical agents and mechanical
stress (such as the weight of the TV). Failure to
follow these instructions could result in serious
injury and/or permanent damage to TV and TV
pedestal.
• Always unplug the TV before cleaning. Gently
wipe the display panel surface (the TV screen)
using a dry, soft cloth (cotton, flannel, etc.). A
hard cloth may damage the surface of the panel.
Avoid contact with alcohol, thinner, benzene,
acidic or alkaline solvent cleaners, abrasive
cleaners, or chemical cloths, which may damage
the surface. Never spray volatile compounds
such as insecticide on the cabinet. Such
products may damage or discolor the cabinet.
5
37) Never hit, press, or place anything on the back
cover. These actions will damage internal parts.
• Upon completion of service, ask the service
technician to perform routine safety checks to
determine that the TV is in safe operating
condition.
38)
WARNING:
RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind into
the TV cabinet slots.
39) During a lightning storm, do not touch the
connecting cables or product.
40) For added protection of your TV from lightning and
power surges, always unplug the power cord and
disconnect the antenna from the TV if you leave
the TV unattended or unused for long periods of
time.
41) Always unplug the TV to completely disconnect
from mains power. When the TV is turned off using
the on/off switch, it is not completely disconnected
from power and a minute amount of current is still
consumed.
42) During normal use, the TV may make occasional
snapping or popping sounds. This is normal,
especially when the unit is being turned on or off. If
these sounds become frequent or continuous,
unplug the power cord and contact a Toshiba
Authorized Service Provider.
43)
WARNING: RISK OF SERIOUS
PERSONAL INJURY OR
EQUIPMENT DAMAGE!
Never strike the screen with a sharp or heavy
object.
44) • The LCD screen of this product can be damaged
by ultraviolet radiation from the sun. When
selecting a location for the television, avoid
locations where the screen may be exposed to
direct sunlight, such as in front of a window.
• Never touch, press, or place anything on the
LCD screen. These actions will damage the LCD
screen. If you need to clean the LCD screen,
follow the instructions in item 36), on page 4.
Service
45)
WARNING:
RISK OF ELECTRIC SHOCK!
Never attempt to service the TV yourself. Opening
and removing the covers may expose you to
dangerous voltage or other hazards. Failure to
follow this WARNING may result in death or
serious injury. Refer all servicing not specified in
this manual to a Toshiba Authorized Service
Provider.
46) If you have the TV serviced:
• Ask the service technician to use only
replacement parts specified by the
manufacturer.
Choosing a location for your LED TV/DVD
combination
To Display your LED TV/DVD combination on the
included Pedestal Stand:
Observe the following safety precautions:
1) Read and follow the pedestal assembly
instructions included with the pedestal.
CAUTION: Before beginning pedestal assembly,
carefully lay the front of the LCD Panel face down
on a flat, cushioned surface such as a quilt or
blanket. Leave the bottom of the unit protruding
over the edge of the surface and assemble the
pedestal as indicated below.
Note: Extreme care should always be used when
attaching the pedestal stand to avoid damage to
the LCD panel.
2) Place the TV on a sturdy, level surface that can
support the weight of the TV.
3) Be sure to secure the TV to a wall stud, pillar,
surface, or other immovable structure. See item
26) page 4.
To Display your LED TV/DVD combination using a
Wall Bracket:
If you decide to wall mount your LED TV/DVD
combination, always use a wall bracket Listed by an
independent laboratory (such as UL, CSA, ETL) that is
appropriate for the size and weight of the TV/DVD
combination:
1) CAUTION: Two people are required for
installation.
2) Unplug and remove any cables and/or other
component connectors from the rear of the TV.
3) Follow the instructions provided with your wall
bracket. Before proceeding, make sure the
appropriate bracket(s) are attached to the wall and
the back of the TV as described in the instructions
provided with the wall bracket.
4) IMPORTANT: Always use the screws supplied or
recommended by the wall mount manufacturer.
5) After attaching the appropriate bracket(s) to the
wall and the back of the TV, remove the pedestal
stand from the TV, as described on page 6.
6) VESA Mounting Pattern
TV Size
Hole Pattern (HxV)
24V4210U
100x100 mm
Screw Size
M4
(unit in mm)
6
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leave the stand protruding over the edge of the
surface.
Note: Extreme care should always be used when
removing the pedestal stand to avoid damage to
the LCD panel.
2) Remove the screws shown in the below diagram.
This will allow removal of the pedestal stand.
3) Once you have removed all of the screws holding
the pedestal stand in place, remove the pedestal
stand from the TV.
CAUTION: Always place the TV on the floor or a
sturdy, level, stable surface that can support the
weight of the unit.
Notes on moisture condensation
Moisture condensation damages the unit. Please
read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day and
drops of water form on the outside of the glass. In the
same way, moisture may condense on this unit’s
internal optical pick-up lens, one of the most crucial
internal parts of the unit.
Moisture condensation may occur in the following
situations:
• When you move the unit from a cold area to a warm
area.
• When you use the unit in a room in which the heat
was just turned on.
• When you use the unit in an area where cold air
from an air conditioner directly hits the unit.
• When you use the unit in a humid area.
Never use the unit when moisture condensation
may occur.
Using the unit when moisture condensation exists may
damage discs and internal parts. Connect the power
cord of the unit to the wall outlet, turn on the unit,
remove the disc, and leave it for two or three hours.
After two or three hours, the unit will have warmed up
and evaporated any moisture. Leaving the TV
connected to the wall outlet will help prevent moisture
condensation in the unit.
Notes on discs
On handling discs
• Do not touch the playback side of the disc.
• Do not attach paper or tape to discs.
On cleaning discs
• Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.
• Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or
antistatic spray for vinyl LPs. It may damage the
disc.
Structure of disc contents
Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. Video CDs and
Audio CDs are divided into tracks.
7
Notes on region numbers
DVD
DVD
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 1 Chapter 2Chapter 3
Video CD/Audio CD
On Video CDs
Video CD/Audio CD
Track 1
Track 2
Track 3
Track 4
The region number of this LED TV/DVD combination
is 1. If region numbers, which stand for their playable
area, are printed on your DVD and you do not find
(
) or (
), disc playback will not be allowed by the
player. (In this case, the LED TV/DVD combination will
display a message on-screen.). Some DVDs that have
no region code label may still be subject to area
restrictions and therefore not playable.
Track 5
Each title, chapter or track is assigned a number,
which is called “title number”, “chapter number” or
“track number” respectively. There may be discs that
do not have these numbers
Notes on copyright
The unauthorized recording, use, distribution, or
revision of copyrighted materials including, without
limitation, television programs, videotapes, and DVDs,
is prohibited under the Copyright Laws of the United
States and other countries, and may subject you to
civil and criminal liability.
About this User’s Guide
This User’s Guide explains the basic instructions of
this LED TV/DVD combination. Some DVD video
discs are produced in a manner that allows specific or
limited operation during playback. As such, the LED
TV/DVD combination may not respond to all operating
command. This is not a defect of the LED TV/DVD
combination. Refer to the instruction notes of discs.
The following symbol may appear on the TV screen
during operation.
It means that the operation is not permitted by the
LED TV/DVD combination or the disc. For example,
sometimes it is unable to stop the playback of
copyright message of the disc when the Stop button is
pressed. Alternatively, this symbol may also indicate
that the feature is not available for the disc.
This LED TV/DVD combination supports Video CDs
equipped with the Playback Control (PBC) function,
version 2.0. You can enjoy two playback variations
depending on types of discs.
• Video CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this LED TV/
DVD combination in the same way as a DVD.
• Video CD equipped with PBC function (Version
2.0)
In addition to operation of a Video CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
on-screen playback menu. Some of the functions
described in this User’s Guide may not work with
some discs.
Playable discs
This LED TV/DVD combination can play the following
discs.
8
• You cannot play discs other than those listed above.
• You cannot play discs of DVD-RAM, DVD-ROM,
CD-ROM, Photo CD, etc., or non-standardized discs
even if they may be labeled as above.
• Some DVD-R/RWs and CD-R/RWs cannot be
played back depending on the recording conditions.
• This LED TV/DVD combination uses the NTSC color
system, and cannot play DVD video discs recorded
in any other color system (PAL, SECAM, etc.).
• This DVD Module does not support 8cm Disc.
• Please do not insert any disc of an irregular shape
into the LED TV/DVD combination, as it may
interfere with the function of the LED TV/DVD
combination. You may not be able to remove it.
• Please do not use after market accessories, such as
a ring protector, as this may cause trouble with the
operation of the LED TV/DVD combination.
Because of problems and errors that can occur during
the creation of DVD and CD software and/or the
manufacture of DVD and CD discs, Toshiba cannot
assure that this LED TV/DVD combination will
successfully play every disc bearing the DVD and CD
logos. If you happen to experience any difficulty
playing a DVD or CD on this LED TV/DVD
combination, please contact Toshiba Customer
Service.
is a trademark of DVD Format/Logo Licensing
Corporation.
FCC Declaration of Conformity
Compliance Statement (Part 15):
The Toshiba 24V4210U LED TV/DVD combinations
comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
The party responsible for compliance to these rules is:
Toshiba America Information Systems, Inc.
9740 Irvine Blvd., Irvine, CA 92618.
Ph: 800-631-3811
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by removing and applying
power to the equipment, the user is encouraged to try
to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Caution: Changes or modifications to this equipment
not expressly approved by Toshiba could void the
user's authority to operate this equipment.
ENERGY STAR® User Information
ENERGY STAR User Information Statement: the factory
default settings of this television meet ENERGY STAR®
requirements. Changing Picture Settings may increase
energy consumption, possibly beyond the limits required
for ENERGY STAR qualification.
To ensure your television is operating at optimal energy
efficiency, select [Home] mode during initial activation. To
return to [Home] mode settings, select [Standard] picture
mode. [Standard] mode is recommended for normal home
use.
ENERGY STAR® qualified TV. Products
that earn the ENERGY STAR prevent
green house gas emissions by meeting
strict guidelines set by the U.S.
Environmental Protection Agency.
ENERGY STAR and the ENERGY STAR
mark are registered U.S. marks.
9
Important notes about your TV/DVD
combination
The following symptoms are technical limitations of
LCD Display technology and are not an indication of
malfunction; therefore, Toshiba is not responsible for
perceived issues resulting from these symptoms.
1) An afterimage (ghost) may appear on the screen if
a fixed, non-moving image appears for a long
period of time. The afterimage is not permanent
and will disappear in a short period of time.
2) The LCD panel contained in this TV is
manufactured using an extremely high level of
precision technology; however, there may be an
occasional pixel (dot of light) that does not operate
properly (does not light, remains constantly lit,
etc.). This is a structural property of LCD
technology, is not a sign of malfunction, and is not
covered under your warranty. Such pixels are not
visible when the picture is viewed from a normal
viewing distance.
Note: Interactive video games that involve shooting a
“gun” type of joystick at an on-screen target may not
work with this TV.
Trademark Information
• CableClear, ColorStream, DynaLight, GameTimer,
SurfLock are trademarks or registered trademarks of
Toshiba America Information Systems, Inc. and/or
Toshiba Corporation.
•Audyssey EQ® provides clear, accurate,
and natural sound right out of the box.
This technology ensures you enjoy your
audio experience as much as your video.
•Audyssey ABX™ technology uses
sophisticated driver analysis and low
frequency monitoring to extend the range and bass
of small speakers. This enables the system to
produce lower frequencies than would be possible
with a traditional system of the same size.
•Audyssey Dynamic Volume® automatically
adjusts volume to provide a consistent
sound level between television programs,
commercials, and between the loud and soft passages
of movies.
•Manufactured under license from
Audyssey Laboratories, Inc. U.S. and
foreign patents pending. Audyssey EQ®,
Audyssey ABX™, Audyssey Premium Television™, and
Audyssey Dynamic Volume® are registered and
licensed trademarks of Audyssey Laboratories, Inc.
•Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
• HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United
States and other countries.
• MPEG Layer-3 audio coding technology licensed
from Fraunhofer IIS and Thomson.
• This production contains Bitstream Vera Sans fonts
under the following copyright: Copyright © 2003 by
Bitstream, Inc. All Rights Reserved. Bitstream Vera is a
trademark of Bitstream, Inc.
Copyright
This guide is copyrighted by Toshiba America Information
Systems, Inc. with all rights reserved. Under the copyright
laws, this guide cannot be reproduced in any form without
the prior written permission of Toshiba. No patent liability
is assumed, however, with respect to the use of the
information contained herein.
©2012 by Toshiba America Information Systems, Inc. All
rights reserved.
10
Notice
The information contained in this manual, including but not
limited to any product specifications, is subject to change
without notice.
TOSHIBA CORPORATION AND TOSHIBA
AMERICA INFORMATION SYSTEMS, INC.
(TOSHIBA) PROVIDES NO WARRANTY WITH
REGARD TO THIS MANUAL OR ANY OTHER
INFORMATION CONTAINED HEREIN AND
HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE WITH
REGARD TO ANY OF THE FOREGOING. TOSHIBA
ASSUMES NO LIABILITY FOR ANY DAMAGES
INCURRED DIRECTLY OR INDIRECTLY FROM
ANY TECHNICAL OR TYPOGRAPHICAL ERRORS
OR OMISSIONS CONTAINED HEREIN OR FOR
DISCREPANCIES BETWEEN THE PRODUCT AND
THE MANUAL. IN NO EVENT SHALL TOSHIBA BE
LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL, OR EXEMPLARY
DAMAGES, WHETHER BASED ON TORT,
CONTRACT OR OTHERWISE, ARISING OUT OF
OR IN CONNECTION WITH THIS MANUAL OR
ANY OTHER INFORMATION CONTAINED
HEREIN OR THE USE THEREOF.
Contents
Chapter 1: Introduction.............................................................. 18
Features ..................................................................18
Overview of installation, setup, and use..................19
TV front, top, and side panel controls and
connections ......................................................20
Adjusting the screen angle......................................22
TV back panel connections .....................................22
Chapter 2: Connecting Your TV................................................ 24
Overview of cable types ..........................................24
Coaxial cable (F-type) .......................................24
Standard A/V cables (red/white/yellow) ............25
Component video cables (red/green/blue) ........25
HDMI® cable .....................................................25
Optical audio cable............................................26
Analog RGB (15-pin) computer cable ...............26
3.5mm Stereo to RCA Y-cable ..........................26
About the connection illustrations ....................26
Connecting a VCR, antenna, or cable TV.................27
Connecting a camcorder .........................................28
11
12
Contents
Connecting a DVD player with ColorStream®
(component video)............................................29
Connecting a satellite receiver.................................30
Connecting an HDMI® or DVI device to the HDMI®
input .................................................................31
HDMI®-CEC connection .........................................34
Connecting a digital audio system ..........................35
Connecting a computer...........................................37
Connecting a computer to the TV’s PC IN
terminal.......................................................37
Connection to the TV’s HDMI® terminal...........39
Chapter 3: Using the Remote Control...................................... 40
Using the remote control ........................................40
Installing batteries ..................................................40
Learning about the remote control..........................42
Chapter 4: Menu Layout and Navigation................................. 46
Main menu layout ...................................................46
Menu setup/installation/layout ................................47
Navigating the menu system...................................48
Chapter 5: Setting up your TV................................................... 50
Initial Setup.............................................................50
Storing channels in memory (optional)...................52
Auto Tuning ......................................................52
Setting channel skip................................................54
Setting the HDMI® audio mode..............................55
Viewing the Digital Signal Meter .............................57
Setting the time zone ..............................................57
Viewing the system status ......................................58
Reset Factory Defaults ......................................58
Chapter 6: Using the TV’s features........................................... 59
Selecting the video input source .............................59
Labeling the video input sources ............................61
Tuning channels using the Channel Browser ..........63
Contents
13
Favorites browser .............................................64
Elements of the Channel Browser .....................65
Adding and clearing channels and inputs in the
History List .................................................67
Tuning channels......................................................67
Tuning to a specific channel (programmed or
unprogrammed)..........................................67
Tuning to the next programmed channel ..........68
Switching between two channels using Channel
Return.........................................................68
Switching between two channels using
SurfLock™ ..................................................68
Selecting the picture size ........................................69
Full ....................................................................70
TheaterWide 1...................................................71
TheaterWide 2...................................................71
TheaterWide 3...................................................71
Native................................................................72
4:3 ....................................................................72
Normal ..............................................................73
Dot by Dot.........................................................73
Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)...............................73
Using the Auto Aspect feature.................................74
Selecting the cinema mode .....................................75
Using the FREEZE feature .......................................75
Adjusting the picture...............................................76
Selecting the picture mode ...............................76
Adjusting the picture quality .............................77
Using closed captions.............................................78
Digital CC settings.............................................80
CC Selector .......................................................80
Adjusting the audio .................................................81
Muting the sound..............................................81
Using the digital audio selector.........................82
Selecting stereo/SAP broadcasts ......................82
14
Contents
Adjusting the audio quality................................83
Audyssey Premium Television™ ......................84
Audyssey ABX™ ...............................................84
Using Audyssey Dynamic Volume® .................85
Selecting the optical audio output format .........85
Using the Dolby® Digital Dynamic Range Control
feature.........................................................85
Using the Locks menu ............................................86
Entering the PIN code .......................................86
Forgotten PIN code ...........................................87
Changing your PIN code ...................................87
Using parental controls (for USA region)................88
Blocking TV programs and movies by rating (VChip) ...........................................................88
Downloading an additional rating system .........89
Displaying ratings .............................................92
Blocking TV programs by Canada rating ...........92
Unlocking programs temporarily ......................93
Using the input lock feature ....................................94
Locking channels ....................................................94
Using the GameTimer® .....................................95
Using the panel lock feature..............................96
Using the PC settings feature..................................97
Setting the PC Audio .........................................98
Using the Media Player ...........................................99
Auto Start function..........................................100
To open the Media Player ...............................100
Viewing photo files .........................................101
Single view......................................................102
Slide show ......................................................103
Playing music files ..........................................103
Viewing photo files and playing music files at the
same time .................................................104
Setting the sleep timer ..........................................106
Automatic Power Down ........................................107
No Signal Power Down .........................................108
Contents
15
Using HDMI®-CEC ...............................................108
Displaying TV status information ..........................112
Understanding the auto power off feature.............113
Understanding the last mode memory feature ......113
Chapter 7: Using the TV’s Advanced Features ......................114
Using the advanced picture settings .....................114
Dynamic Contrast ...........................................114
Static Gamma .................................................115
Color temperature ...........................................115
CableClear® digital Noise Reduction ..............116
MPEG Noise Reduction...................................117
Using the Game Mode feature.........................117
Chapter 8: Basic Disc Playback..............................................119
Disc playback........................................................119
Basic playback (DVD/VCD/CD)........................119
Removing a disc .............................................121
Disc playback reminders.................................121
Playback navigation ..............................................122
Playing in fast reverse or fast forward direction
(DVD/VCD/CD) ..........................................122
Playing frame by frame (DVD/VCD) ................123
Playing in slow motion (DVD/VCD).................123
Locating a chapter or track (DVD/VCD/CD).....123
Chapter 9: Advanced Disc Playback.......................................124
Zoom function/Scene navigation...........................124
Using Zoom (DVD/VCD) .................................124
Locating a specific scene ................................125
Scene bookmark ...................................................126
Bookmarking a scene (DVD/VCD) ...................127
Viewing a scene bookmark (DVD/VCD)...........128
Repeat playback/A-B repeat ............................128
Enabling repeat playback (DVD/VCD)..............128
Enabling A-B repeat mode (DVD/VCD/CD) ......129
Scene angle/Title selection/DVD menu..................130
16
Contents
Changing the scene angle (DVD) ....................130
Selecting a DVD title (DVD).............................130
DVD menu (DVD)............................................130
Sound track language/Audio channel/Subtitle.......131
Selecting a sound track language (DVD).........131
Selecting the audio channel (VCD)..................131
Viewing subtitles (DVD) ..................................131
Playback information/VCD playback control .........132
Viewing the playback info (DVD/VCD).............132
Enabling the Playback Control (PBC) function
(VCD) ........................................................132
MP3, WMA, JPEG, and Audio CD operation..........133
MP3/WMA/JPEG/Audio CD information..........133
About the file browser.....................................135
Playing an audio file........................................136
Viewing a JPEG file .........................................137
Viewing a slide show ......................................138
MP3, WMA, JPEG, and Audio CD playback modes .....
139
Enabling repeat playback ................................139
Programming the playback sequence .............140
Customizing disc playback....................................141
Configuring the disc playback settings
(DVD/VCD/CD) ..........................................141
Disc playback setup ........................................143
Chapter 10: Troubleshooting...................................................147
General troubleshooting........................................147
Picture problems ..................................................148
Sound problems ...................................................149
Remote control problems .....................................150
Channel tuning problems ......................................150
Closed caption problems ......................................151
Rating blocking (V-Chip) problems.......................151
No HDMI®-CEC operation ....................................151
HDMI® problems .................................................152
Contents
17
Media Player problems .........................................152
Disc playback problems ........................................152
light indicator .......................................................153
Power indicator...............................................153
If the problem persists after trying the solutions ..153
Appendix A: Specifications...................................................... 154
Television system .................................................154
Channel coverage..................................................154
Power source........................................................155
Power maximum current ................................155
Power consumption........................................155
Audio power....................................................155
Speaker type .........................................................155
Video/audio terminals ...........................................155
Video/audio input............................................155
ColorStream® (component video) HD input...155
HDMI® input ..................................................156
Digital audio output.........................................156
PC input ..........................................................156
DVD/CD player ................................................156
Dimensions...........................................................156
Mass (weight) .................................................156
Operating conditions.......................................156
Supplied accessories ............................................157
Acceptable signal formats for PC IN, HDMI® ......157
PC IN signal formats .......................................157
HDMI® signal formats....................................157
Appendix B: License Agreement............................................ 159
Index.......................................................................................... 163
Chapter 1
Introduction
Features
The following are just a few of the many exciting features of your
new Toshiba wide screen, integrated HD, LED TV/DVD
combination:
18
❖
Integrated Digital Tuning (8VSB ATSC and QAM)—
Eliminates the need for a separate digital converter set-top box
(in most cases).
❖
1920 x 1080 output resolution.
❖
Two HDMI®—Digital, High-Definition Multimedia Interfaces
with 1080p input support, see “Connecting an HDMI® or DVI
device to the HDMI® input” on page 31.
❖
ColorStream® HD—High-resolution component video input,
see “Connecting a DVD player with ColorStream® (component
video)” on page 29.
❖
Digital Audio Out—Optical audio connection with Dolby®
Digital optical output form, see “Connecting a digital audio
system” on page 35.
❖
CableClear®—Digital picture Noise Reduction, see
“CableClear® digital Noise Reduction” on page 116.
❖
PC IN (Analog RGB)—Computer terminal, see “Connecting
a computer to the TV’s PC IN terminal” on page 37.
Introduction
Overview of installation, setup, and use
19
❖
HDMI®-CEC—Allows control of external devices from the
TV remote via HDMI® connection, see “Using HDMI®-CEC”
on page 108.
❖
Media Player—Allows you to view photo files and play
music, see “Using the Media Player” on page 99.
❖
ENERGY STAR® qualified.
Overview of installation, setup, and use
Follow these steps to configure your TV and begin using its many
exciting features.
Carefully read the important safety, installation, care, and service
information. Keep this manual for future reference.
1
To choose a location for the TV:
❖
Read “Important notes about your TV/DVD combination”
on page 9.
❖
Place the TV on the floor or a sturdy, level, stable surface
that can support the weight of the unit. Secure the TV to a
wall, pillar, or other immovable structure, see “To avoid
damage to this product, never place or store the TV in
direct sunlight; hot, humid areas; or areas subject to
excessive dust or vibration.” on page 4.
❖
Place the TV in a location where light does not reflect on
the screen.
❖
Place the TV far enough from walls and other objects to
allow proper ventilation. Inadequate ventilation may cause
overheating, which will damage the TV. THIS TYPE OF
DAMAGE IS NOT COVERED UNDER THE TOSHIBA
WARRANTY.
2
Do not plug in any power cords until after you have connected
all cables and devices to your TV.
3
Before connecting cables or devices to the TV, learn the
functions of the TV’s connections and controls, see “Overview
of cable types” on page 24.
4
Connect your other electronic device(s) to the TV, see
“Connecting an HDMI® or DVI device to the HDMI® input”
on page 31.
5
Install the batteries in the remote control, see “Installing
batteries” on page 40.
20
Introduction
TV front, top, and side panel controls and connections
6
See “Learning about the remote control” on page 42 for an
overview of the buttons on the remote control.
7
After connecting all cables and devices, plug in the power
cords for your TV and other devices. Then press the Power
button on the TV control panel or remote control to turn on the
TV. If the TV stops responding to the controls on the remote
control or TV control panel and you cannot turn the TV off or
on, unplug the power cords for a few seconds and then plug
them in and try again.
8
See “Navigating the menu system” on page 48 for a quick
overview of navigating the TV’s menu system.
9
Program channels into the TV’s channel memory “Auto
Tuning” on page 52.
10 For details on using the TV’s features, see chapters 8 and 9.
11 For details on disc playback, see chapters 8 and 9.
12 For help, refer to “Troubleshooting” on page 147.
13 For technical specifications and warranty information, see
“Specifications” on page 154.
14 For the End User License Agreement, see “License
Agreement” on page 159.
TV front, top, and side panel controls and connections
4
5
3
6
7
8
9
10
2
1
(Sample Illustration) Front and side panel controls and connections
1
Power On/Standby LED—Power indicator light, (glows
green when the TV power is On.
Introduction
TV front, top, and side panel controls and connections
21
2
Remote sensor (embedded)—Point the remote control toward
this remote sensor.
3
Disc slot—Load the disc, with label facing forward, into the
disc slot to view or listen.
4
EJECT button—Press to eject the disc.
5
VOLUME (+ -) buttons—Adjusts the volume level. When an
on-screen menu appears, these buttons function as ( / )
menu navigation buttons.
6
Play ( )/Channel ( ) arrow) buttons—Plays the disc in
DVD mode; changes the channel when in TV mode.
( ) arrow button—When an on-screen menu appears, the
button functions as an up menu navigation button.
7
Stop ( )/Channel ( arrow) buttons—Stops the disc
playback in DVD mode; changes the channel when in TV
mode.
( arrow) button—When an on-screen menu appears, the
button functions as an up menu navigation button.
8
MENU/OK—Accesses the menu. When an on-screen menu
appears, the MENU button on the TV’s control panel functions
as the OK button.
9
INPUT/EXIT—Changes the source you are viewing. When an
on-screen menu appears, the INPUT button on the TV’s
control panel functions as the EXIT button.
10 POWER—Turns the TV On and Off. If the TV stops
responding to the controls on the remote control or TV control
panel and you cannot turn off the TV, press and hold the
POWER button on the TV control panel for few seconds to
reset the TV.
22
Introduction
Adjusting the screen angle
Adjusting the screen angle
You can adjust the angle of the TV screen 3° forward or 15°
backward from a vertical angle. Hold the base of the TV while
adjusting the screen. (This feature is available on select models.)
(Sample Illustration) Adjusting the screen angle
TV back panel connections
For explanations of cable types and connections, see “Overview of
cable types” on page 24.
1
7
8
2
Power cord
3
4
5
6
(Sample Illustration) Back panel connections
1
NOTE
ColorStream® HD—High-resolution component video input
and shared composite video input, see “Connecting a DVD
player with ColorStream® (component video)” on page 29.
Component/Standard (composite) video cables carry only video
information; separate audio cables are required for a complete
connection.
Introduction
TV back panel connections
2
3
4
5
6
7
8
23
ANALOG AUDIO OUT—Analog audio outputs for
connecting an audio amplifier.
PC/HDMI 1 (Audio) IN—PC audio input terminal is shared
with an HDMI 1 analog audio input terminal, and its use can be
configured in the Audio Setup menu, see “Setting the PC
Audio” on page 98.
PC IN—Connects a personal computer.
DIGITAL AUDIO OUT—Optical audio output in Dolby®
Digital or PCM (pulse-code modulation) format for connecting
an external Dolby Digital decoder, amplifier, or home theater
system with optical audio input.
ANT/CABLE—Antenna input that supports analog (NTSC)
and digital (ATSC) off-air antenna signals and analog and
digital Cable TV (QAM) signals.
HDMI IN—High-Definition Multimedia Interface input
receives digital audio and uncompressed digital video from an
HDMI® device or uncompressed digital video from a DVI
device. HDMI® connection is necessary to receive 1080p
signals.
USB port—Used to access JPEG or MP3 files, or to update the
TV’s firmware.
Chapter 2
Connecting Your TV
Overview of cable types
Before purchasing cables, know the connector types your devices
require. You can purchase cables from most stores that sell
audio/video devices.
Coaxial cable (F-type)
(Sample Illustration) Coaxial cable
Coaxial (F-type) cable connects your antenna, cable TV service,
and/or cable converter box to the ANT/CABLE input on your TV.
24
Connecting Your TV
Overview of cable types
25
Standard A/V cables (red/white/yellow)
(Sample Illustration) Standard AV cables
Standard A/V cables (composite video) usually come in sets of
three, and connects with video devices with analog audio and
composite video output. These cables (and the related inputs on
your TV) are typically color-coded according to use: yellow for
video, red for stereo right audio, and white for stereo left (or mono)
audio.
Component video cables (red/green/blue)
(Sample Illustration) Component video cables
Component video cables come in sets of three and connects video
devices with component video output. (ColorStream® is Toshiba’s
brand of component video.) These cables are typically color-coded
red, green, and blue. Separate audio cables are required for a
complete connection.
NOTE
Component video cables provide better picture quality than
composite video cables.
HDMI® cable
(Sample Illustration) HDMI® cable
Use an HDMI® (High-Definition Multimedia Interface) cable with
devices that have HDMI® output. An HDMI® cable delivers digital
audio and video in its native format. Separate audio cables are not
required, see “Connecting an HDMI® or DVI device to the
HDMI® input” on page 31.
NOTE
HDMI® cables provide the best audio and picture quality.
26
Connecting Your TV
Overview of cable types
Optical audio cable
(Sample Illustration) Optical audio cable
Optical audio cable connects receivers with Dolby® Digital or PCM
(pulse-code modulation) optical audio input to the TV’s Digital
Audio Out terminal, see “Connecting a digital audio system” on
page 35.
Analog RGB (15-pin) computer cable
(Sample Illustration) Analog RGB (15-pin) computer cable
Analog RGB (15-pin) computer cable connects a computer to the
TV’s PC IN terminal, see “Connecting a computer” on page 37.
NOTE
Separate audio cables are required.
3.5mm Stereo to RCA Y-cable
(Sample Illustration) 3.5mm Stereo to RCA Y-cable
3.5mm Stereo to RCA Y-cable connects an audio signal from DVI
device to TV.
About the connection illustrations
You can connect different types and brands of devices to your TV in
several different configurations. The connection illustrations in this
manual are representative of typical device connections only. The
input/output terminals on your devices may differ from those
illustrated herein. For details on connecting and using your specific
devices, refer to each device’s User’s Guide.
Connecting Your TV
Connecting a VCR, antenna, or cable TV
27
Connecting a VCR, antenna, or cable TV
White
Red
Ye l l o w
Ye l l o w
Red
White
(Sample Illustration) Connecting to a VCR, antenna, or Cable TV
Items needed:
❖
Coaxial cables
❖
Standard AV cables
NOTE
When you use a Cable box, you may not be able to use the remote
control to program or access certain features on the TV.
To view the antenna or cable signal:
Select ANT/CABLE video input source on the TV.*
To view basic and premium cable channels:
Turn OFF the VCR. Select the ANT/CABLE video input source on
the TV.* Tune the TV to channel 3 or 4 (whichever channel the
Cable box output is set to). Use the Cable box controls to change
channels.
To view the VCR or camcorder video:
Turn ON the VCR or camcorder video. Select VIDEO input source
on the TV.*
*To select the video input source, press the INPUT button on the
remote control, see “Selecting the video input source” on page 59.
To program the TV remote control to operate other devices, see
“Learning about the remote control” on page 42.
28
Connecting Your TV
Connecting a camcorder
Connecting a camcorder
Ye l l o w
Red
White
Ye l l o w
Red
White
(Sample Illustration) Connecting a camcorder
You will need standard A/V cables.
To view the camcorder video, select the VIDEO input source on the
TV.*
*To select the video input source, press the INPUT button on the
remote control, see “Selecting the video input source” on page 59.
NOTE
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal liability.
Connecting Your TV
Connecting a DVD player with ColorStream® (component
29
Connecting a DVD player with ColorStream®
(component video)
Red
Blue
Green
White
Red
Green
Red
Blue
Red
White
(Sample Illustration) Connecting a DVD player with ColorStream®
Items needed:
❖
Standard audio cables
❖
Component video cables
❖
You can connect the component video cables (plus audio
cables) from the DVD player to the COLOR STREAM
HD terminal in the TV. The COLOR STREAM HD
terminal can be used to display Progressive (480p, 720p)
and Interlaced (480i, 1080i). Please note that 1080p is not
supported. Check the User’s Guide of the DVD player in
order to determine the best output signal available.
❖
If your DVD player does not have component video,
connect a standard A/V cable to the AUDIO/VIDEO
terminal. If your DVD player has HDMI® video, see
“Overview of installation, setup, and use” on page 19.
To view the DVD player:
Turn ON the DVD player. Select the ColorStream® HD video
input source on the TV.*
*To select the video input source, press the INPUT button on the
remote control, see “Selecting the video input source” on page 59.
30
Connecting Your TV
Connecting a satellite receiver
Connecting a satellite receiver
Green
Blue
Red
White
Red
Green
Red
Blue
Red
White
(Sample Illustration) Connecting a satellite receiver
Items needed:
❖
Standard audio cables
❖
Component video cables
❖
You can connect the component video cables (plus audio
cables) from the DVD player to the COLOR STREAM
HD terminal in the TV. The COLOR STREAM HD
terminal can be used to display Progressive (480p, 720p)
and Interlaced (480i, 1080i). Please note that 1080p is not
supported. Check the User’s Guide of the DVD player in
order to determine the best output signal available.
❖
If your satellite receiver does not have component video,
connect a standard A/V cable to the AUDIO/VIDEO
terminal.
To view satellite programs using the component video
connections:
Turn ON the satellite receiver. Select the ColorStream® HD video
input source on the TV.*
*To select the video input source, press the INPUT button on the
remote control, see “Selecting the video input source” on page 59.
Connecting Your TV
Connecting an HDMI® or DVI device to the HDMI® input
NOTE
31
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal liability.
Connecting an HDMI® or DVI device to the HDMI® input
The HDMI® input on your TV receives digital audio and
uncompressed digital video from an HDMI® source device, or
uncompressed digital video from a DVI (Digital Visual Interface)
source device.
This input is designed to accept HDCP (High- Bandwidth
Digital-Content Protection) program material in digital form from
EIA/CEA-861-D– compliant consumer electronic devices (such as
a set-top box or DVD player with HDMI® or DVI output).
The HDMI® input can accept and display VGA, SVGA, XGA,
WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i
(60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal
specifications, see “HDMI® signal formats” on page 157.
Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48
kHz.
NOTE
To connect a computer to the HDMI® input, see “Connection to the
TV’s HDMI® terminal” on page 39.
To connect an HDMI® device, you will need one HDMI® cable
(type A connector) per HDMI® device.
❖
For proper operation, it is recommended that you use an
HDMI® cable with the HDMI® Logo (
).
❖
To display an 1080i/60Hz signal format, you will need a High
Speed HDMI® cable. A conventional HDMI®/DVI cable may
not work properly.
32
Connecting Your TV
Connecting an HDMI® or DVI device to the HDMI® input
❖
HDMI® cables transfer both video and audio. Separate analog
audio cables are not required (see illustration).
(Sample Illustration) Connecting an HDMI® device
To view the HDMI® device video:
Select HDMI 1 or HDMI 2 video input source on the TV.*
*To select the video input source, press the INPUT button on the
remote control, see “Selecting the video input source” on page 59.
To connect a DVI device, you will need:
❖
HDMI® to DVI adapter cable
For proper operation, the length of an HDMI® to DVI adapter
cable should not exceed 9.8 ft (3m). The recommended length
is 6.6 ft (2m).
Connecting Your TV
Connecting an HDMI® or DVI device to the HDMI® input
❖
33
3.5mm Stereo to RCA Y-Cable
An HDMI® to DVI adapter cable transfers video only. Separate
analog audio cables are required (see illustration).
(Sample Illustration) DVI Device connections
NOTE
To ensure that the HDMI® or DVI device is reset properly:
❖ When turning on your electronic components, turn on the TV
first, and then the HDMI® or DVI device.
❖ When turning off your electronic components, turn off the
HDMI® or DVI device first, and then the TV.
NOTE
EIA/CEA-861-D compliance covers the transmission of
uncompressed digital video with high-bandwidth digital
content protection, which is being standardized for reception of
high-definition video signals. Because this is an evolving
technology, it is possible that some devices may not operate properly
with the TV.
34
Connecting Your TV
HDMI®-CEC connection
HDMI®-CEC connection
You can control the basic functions of connected audio/video
devices using the TV’s remote control if you connect a
HDMI®-CEC compatible audio receiver or playback device. For an
explanation of setup and operations, see “HDMI®-CEC playback
device (DVD player, etc.) control” on page 108. To connect an
HDMI® device, you will need one HDMI® cable (type A connector)
per HDMI® device.
(Sample Illustration) HDMI®-CEC connections
To connect an Audio Receiver and Playback Devices, you will need
HDMI® cables.
NOTE
❖ If several devices are connected, HDMI®-CEC feature may not
operate properly.
❖ For proper operation, it is recommended that you use an HDMI®
cable with the HDMI® Logo (
).
Before controlling the device(s):
❖
After completing the above connections, configure the
HDMI®-CEC Setup menu with the desired settings, see
“HDMI®-CEC input source selection” on page 110.
❖
The connected devices must also be set. For details, see the
operation manual for each device.
❖
The HDMI®-CEC feature uses the CEC technology as
regulated by the HDMI® standard.
Connecting Your TV
Connecting a digital audio system
35
❖
This feature is limited to models incorporating Toshiba’s
HDMI®-CEC. However, Toshiba is not liable for those
operations. For compatibility information, refer to the
individual instruction manuals for your other devices that have
CEC technology.
NOTE
This feature may not work properly depending on the devices that are
connected.
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby®
Digital* or 2-channel down-mixed PCM (pulse-code modulation)
signal for use with an external Dolby Digital decoder or other
external audio system with optical audio input.
You will need an Optical audio cable (Use an optical audio cable
that has the larger “TosLink” connector and not the smaller
“mini-optical” connector.)
®
(Sample Illustration) Connecting a digital audio system
To control the audio:
1
Turn on the TV and the digital audio device.
2
Press the MENU button on the remote control and open the
Sound menu.
36
Connecting Your TV
Connecting a digital audio system
3
Press the ( / arrow) buttons to select Audio Setup, and then
press the INPUT button.
(Sample Image) Audio Setup screen
4
Press the ( /
Format.
arrow) buttons to select Digital Output
5
Press the ( / arrow) buttons to select either Dolby Digital
or PCM, depending on your device.
(Sample Image) Audio Setup screen - Done
6
NOTE
To save the new settings, highlight Done, and then press the
OK button.
To revert to the factory defaults, highlight Reset, and then
press the OK button.
❖ Some audio systems may not be compatible with Dolby Digital
bitstream signals. Older audio systems that are not compatible
with standard optical out signals may not work properly, creating
a high noise level that may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY.
❖ The DIGITAL AUDIO OUT terminal may not output some digital
audio sources because of copy restrictions.
Connecting Your TV
Connecting a computer
37
Connecting a computer
With either the PC IN or HDMI® connection, you can view your
computer’s display on the TV and hear the sound from the TV’s
speakers.
Connecting a computer to the TV’s PC IN terminal
When connecting a computer to the PC IN terminal on the TV, use
an analog RGB (15-pin) computer cable and a PC audio cable. For
more information, see “Overview of cable types” on page 24.
(Sample Illustration) Computer connections
To use a computer, set the monitor output resolution on the
computer before connecting it to the TV. The supported signal
formats are VGA, SVGA, XGA, WXGA and SXGA. For detailed
signal specifications, see “Acceptable signal formats for PC IN,
HDMI®” on page 157.
38
Connecting Your TV
Connecting a computer
Other formats or non-standard signals will not be displayed
correctly.
To display the optimum picture, use the computer setting feature,
see “Using the PC settings feature” on page 97.
NOTE
❖ The PC audio input terminals on the TV are shared with the
HDMI 1 analog audio input terminals. For configuration
information, see “Setting the PC Audio” on page 98.
❖ Some computer models cannot be connected to this TV.
❖ If the computer has a compatible mini D-sub15-pin terminal, an
adapter is not required.
❖ Depending on the content’s title and the computer’s
specifications, some scenes may be skipped or you may not be
able to pause during multi-angle scenes.
Signal names for mini D-sub 15-pin connector:
Pin No.: Signal Name:
Pin No.: Signal Name:
Pin No.: Signal Name:
1
R
6
Ground
11
Reserved
2
G
7
Ground
12
SDA
3
B
8
Ground
13
H-sync
4
Reserved
9
5V
14
V-sync
5
Ground
10
Ground
15
SCL
Connecting Your TV
Connecting a computer
39
Connection to the TV’s HDMI® terminal
When connecting a computer with a HDMI® terminal on the TV,
use an adapter cable and analog audio cables.
When connecting a computer with an HDMI® port, use an HDMI®
cable (type A connector). Separate analog audio cables may not be
necessary, depending on computer hardware and setup.
TV back panel
PC audio cable
Computer
PC audio output
HDMI to DVI adapter cable
(Sample Illustration) Connections to HDMI® terminal
The supported signal formats are VGA, SVGA, XGA, WXGA,
SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and
1080p (24Hz/60Hz). For signal specifications, see “Acceptable
signal formats for PC IN, HDMI®” on page 157.
NOTE
❖ The edges of the picture may be hidden.
❖ If receiving a 480i (HDMI®), 480p (HDMI®), 720p, 1080i, or
1080p signal program, Native mode scales the video to display
the entire picture within the borders of the screen (i.e. no
overscanning).
Chapter 3
Using the Remote Control
Using the remote control
The remote control can operate your LED TV/DVD combination
and control the basic functions of connected audio/video devices if
you connect a HDMI®-CEC compatible audio receiver or playback
device, see “HDMI®-CEC playback device (DVD player, etc.)
control” on page 108.
Installing batteries
To install batteries:
1
Open the battery lid at the bottom of remote control.
Push and slide down
(Sample Illustration) Removing the battery cover
40
Using the Remote Control
Installing batteries
2
41
Insert the batteries, corresponding to the (+) and (–) markings
on the battery compartment.
(Sample Illustration) Installing the batteries
3
Replace the battery cover.
Do not expose batteries to excessive heat such as sunshine, fire, etc.
NOTE
❖ Be sure to use AAA size batteries.
❖ Dispose of batteries in a designated disposal area.
❖ Always consider the environment when disposing of batteries.
Always follow applicable laws and regulations.
❖ If the remote does not operate correctly, or if the operating range
is reduced, replace the batteries.
❖ Always replace both batteries with new ones. Never mix battery
types or use new and used batteries together.
❖ Always remove batteries from the remote if they are dead or if the
remote control is not to be used for an extended period of time.
This prevents battery acid from leaking into the battery
compartment
42
Using the Remote Control
Learning about the remote control
Learning about the remote control
The buttons used for operating the LED TV/DVD combination are
described here. For the HDMI®-CEC remote control functions, see
“HDMI®-CEC playback device (DVD player, etc.) control” on
page 108.
2
1
5
3
4
6
8
11
12
7
9
10
13
15
14
19
20
16
17
18
23
21
22
25
28
30
32
34
36
38
40
24
26
27
29
31
33
35
37
39
(Sample Illustration) Remote control overview
Using the Remote Control
Learning about the remote control
NOTE
43
The error message “NOT AVAILABLE” may appear if you press a key
for a function that is not available.
1
The POWER button turns the TV On and Off. When the TV is
on, the power LED indicator on the TV front glows green.
2
The EJECT button ejects the disc from the disc slot.
3
The TV/DVD button switches between TV and DVD mode.
4
The FREEZE button freezes the picture. Press again to restore
the video, see “Using the FREEZE feature” on page 75.
5
The INPUT button selects the video input source, see
“Selecting the video input source” on page 59.
6
The Channel Number buttons directly tune channels.
7
The FAV button accesses the Favorites List in the Channel
Browser, see “Favorites browser” on page 64.
8
The Dash/100 button allows you to enter two part channel
numbers, see “Tuning to a specific channel (programmed or
unprogrammed)” on page 67 or to edit the Favorites List, see
“Favorites browser” on page 64.
9
The PIC MODE button selects the picture mode, see
“Selecting the picture mode” on page 76.
10 The PIC SIZE button cycles through the picture sizes
“Selecting the picture size” on page 69.
11 The MUTE button reduces or turns off the sound, see “Muting
the sound” on page 81.
12 The SLEEP button accesses the sleep timer, see “Setting the
sleep timer” on page 106.
13 The DISPLAY/INFO button displays TV status information as
well as program details, when available, see “Displaying TV
status information” on page 112.
14 The CH ( / arrow) buttons cycle through programmed
channels (when no on-screen menu is displayed), see .
15 The VOL (+ –) buttons adjust the volume level.
16 The DVD MENU button accesses the DVD menu, see “DVD
menu (DVD)” on page 130.
44
Using the Remote Control
Learning about the remote control
17 The CH RTN button returns to the last viewed channel or
source, see “Switching between two channels using Channel
Return” on page 68; Also, the CH RTN button returns to the
previous directory from a Media Player sub-folder or
sub-menu, see “Viewing photo files” on page 101.
18 The AUDIO/MTS button selects the audio mode in
ANT/CABLE source, see “Using the MTS button” on page 83;
selects the DVD sound track language or VCD audio channel
in DVD mode, see “Sound track language/Audio
channel/Subtitle” on page 131.
19 The SETUP/MENU button accesses the main TV menu
system, see “Navigating the menu system” on page 48;
configures the disc playback settings in DVD mode, see
“Advanced Disc Playback” on page 124.
20 The SUBTITLE/CC button selects the subtitle language or
switches subtitle off in DVD mode, see “Viewing subtitles
(DVD)” on page 131. CC: opens the closed caption selector in
ANT/CABLE source.
21 The OK button activates highlighted items in the main menu
system.
22 The ( / arrow) buttons open the Channel Browser and tune
to the previous/next channel in the channel history while
watching TV, see “Tuning channels using the Channel
Browser” on page 63.
23 The Arrow buttons (
) select or adjust programming
menus when a menu is on-screen.
24 The CANCEL/EXIT button closes on-screen menus, or
returns you to the previously view menu.
25 The TOP MENU button accesses the top menu of DVDs that
contain two or more titles, see “Disc playback” on page 119.
26 The PLAY button begins playback of the loaded disc, see
“Playing an audio file” on page 136.
27 The FF button fast-forwards playback of the disc, see “Playing
an audio file” on page 136.
28 The REV button fast-reverses playback of the disc, see
“Playing an audio file” on page 136.
29 The PAUSE button suspends disc playback temporarily or
plays back disc frame by frame, see “Playing an audio file” on
page 136.
Using the Remote Control
Learning about the remote control
45
30 The STOP button stops playback of the loaded disc, see
“Playing an audio file” on page 136.
31 The SKIP forward button skips forward to locate later DVD
chapters, see “Playing an audio file” on page 136.
32 The SKIP reverse button skips back to locate the beginning of
current DVD chapter or locate a previous chapter, see “Playing
an audio file” on page 136.
33 The MARKER button bookmarks specific points in the
playback range for later access, see “Bookmarking a scene
(DVD/VCD)” on page 127.
34 The PLAY MODE button sets the disc playback repeat mode,
see “Disc playback” on page 119.
35 The SLOW button slow-forwards playback of the disc, see
“Disc playback” on page 119.
36 The ZOOM button zooms into the center of the image during
disc playback, see “Zoom function/Scene navigation” on
page 124.
37 The JUMP button selects or locates a specific point within the
disc playback, see “Locating a specific scene” on page 125.
38 The ANGLE button changes the scene angle when playing
back a DVD recorded with multi-angle scenes, see “Changing
the scene angle (DVD)” on page 130.
39 The REPEAT A-B button repeats playback of a specific
section between two set points, see “Enabling A-B repeat
mode (DVD/VCD/CD)” on page 129.
40 The RETURN button returns to the root directory in audio CD
playback, see “Playing an audio file” on page 136.
Chapter 4
Menu Layout and Navigation
Main menu layout
The Installation menu contains the Terrestrial and System Status
menus.
To open the Installation menu, press the MENU button on the
remote control or MENU on the TV control panel, open the Setup
menu, select Installation, and then press the OK button.
Icon
Picture
Sound
46
Item
Mode
Picture Settings
Noise Reduction
Game Mode
Theater Settings
Digital Audio Selector
Audio Settings
Audio Setup
Option
Dynamic/Standard/Movie/PC/Preference
Opens the Picture Settings menu
Opens the Noise Reduction menu
Off/On
Opens the Theater Settings menu
Launches the temporary Audio Selector
Opens the Audio Settings menu
Opens the Audio Setup menu
Menu Layout and Navigation
Menu setup/installation/layout
Icon
Preferences
Locks
Setup
Item
CC Selector
Base CC Mode
Digital CC Settings
Input Labeling
AV Input
Menu Language
Channel Browser Setup
HDMI®-CEC Player
Control
Energy Saving Settings
Enable Rating Blocking
Edit Rating Limits
Input Lock
Panel Lock
GameTimer®
New PIN Code
Installation
HDMI®-CEC Setup
Sleep Timer
PC Settings
Media Player
47
Option
Launches the temporary CC Selector
Off/CC1/CC2/CC3/CC4/T1/T2/T3/T4
Opens the Digital CC Settings menu
Opens the Input Labeling menu
Selects ColorStream® HD/Video input
English/Français/Español
Opens the Channel Browser Setup menu
Opens the HDMI®-CEC Player Control
menu
Opens the Energy Saving Settings menu
Off/On
Opens the Edit Rating Limits menu
Off/Video/Video+
Off/On
Off/30 min/60 min/90 min/120 min
Opens the New PIN Code entry screen
Opens the Installation menu
Opens the HDMI®-CEC Setup menu
10-minute increments, from 0 min to a
maximum of
12 hours
Opens the PC Settings menu
Opens the Media Player menu
Menu setup/installation/layout
The Installation menu contains the Terrestrial and System Status
menus.
To open the Installation menu, press the MENU button on the
remote control or MENU on the TV control panel, open the Setup
menu, select Installation, and then press the OK button.
48
Menu Layout and Navigation
Navigating the menu system
Icon
Terrestrial
Item
Input Configuration
Channel Program
Channel Options
Time Zone
System Status
Signal Meter
System Information
Option
Opens the Input Configuration menu
Start Scan > Scans for new channels on
ANT/CABLE
Opens the Skip/Lock Channel menu
Eastern/Newfoundland/Atlantic/Hawaii/
Alaska/Pacific/Mountain/Central
Opens the Signal Meter menu
Opens the System Information screen
Navigating the menu system
You can use the buttons on the remote control or TV control panel
to access and navigate your TV’s on-screen menu system.
1
Press the MENU button to open the menu system.
(Sample Image) Navigating the menu system
2
When a menu is open, use the ( / / / arrow) buttons on
the remote control or the ( / / / + - arrow) buttons on the
TV control panel to move in the corresponding direction in the
menu.
3
Press the OK button to save your menu settings or select a
highlighted item.
A highlighted menu item appears in a different color in the
menu.
Menu Layout and Navigation
Navigating the menu system
49
4
All menus close automatically if you do not make a selection
within a few seconds, except the signal meter menu, which
closes automatically after a few minutes.
5
To close a menu instantly, press the EXIT button.
NOTE
The menu background may sometimes appear black, depending on
the signal the TV is receiving. This is not a sign of malfunction.
Chapter 5
Setting up your TV
Initial Setup
When you first turn on or reset the TV, the Initial Setup window
will appear.
1
In the Menu Language field, press the ( /
arrow) buttons.
2
Press the ( / arrow) buttons to select Time Zone Setup and
set your desired time zone, using the ( / arrow) buttons, and
then press the OK button.
The Location settings window appears.
3
For normal home use, press the ( / arrow) buttons to select
Home, and then press the OK button.
The ANT/CABLE In setup window appears.
4
Press the ( / arrow) buttons to select the input source
(Cable or Antenna), then press the OK button.
5
Press the OK button to select Start Scan and continue with the
Auto Tuning.
You can stop the Initial Setup by pressing the EXIT button.
However if you do not finish the entire Initial Setup process and
press the POWER button before starting the auto tuning steps, the
Initial Setup window will appear every time you turn on the TV.
50
Setting up your TV
Initial Setup
51
Menu language
You can choose from three different menu language settings
(English, Français, and Español). Your selection is the language all
menus are displayed in.
To select the menu language:
1
Press the MENU button to open the Preferences menu, and
highlight Menu Language.
2
Select Settings, SETUP, and then Menu Language.
3
Press the ( /
language.
arrow) buttons to select your preferred
(Sample Image) Selecting the menu language
4
Press the EXIT button to close the Preferences menu.
ANT/CABLE IN
This setting configures the antenna input source for the
ANT/CABLE terminal.
1
Press the MENU button to open the Setup menu.
2
Highlight Installation, and then press the OK button.
A new set of Installation menus appear.
3
Open the Terrestrial menu, highlight Input Configuration,
and then press the OK button.
(Sample Image) Selecting the ANT/CABLE input source
52
Setting up your TV
Storing channels in memory (optional)
4
Highlight ANT/CABLE In and press the ( / arrow) buttons
to select the input source (Cable or Antenna).
(Sample Image) Selecting the ANT/CABLE input source
5
To save your new settings, highlight Done, and then press the
OK button. To revert to your original settings, highlight
Cancel, and then press the OK button.
Storing channels in memory (optional)
To make sure your TV stops only on the channels you want when
you press the CH Up/Down arrow buttons on the remote control or
the control panel, store those channels in the TV’s memory.
Auto Tuning
You can configure the TV to detect all active channels in your area
and store them in its memory. Then you can manually store or skip
individual channels from memory.
NOTE
❖ You must configure the antenna/cable input source first.
❖ The automatic channel programming process will erase
channels that were previously programmed into the TV’s
memory.
❖ To tune the TV to a channel not programmed in the channel
memory, you must use the Channel Number buttons on the
remote control.
❖ Programming channels when the ANT/CABLE input is
configured for Cable will take substantially longer than when the
antenna input is configured for Antenna. This is normal;
however, once channel programming is finished, you should not
have to repeat the programming process again unless your
Cable TV service lineup changes significantly.
To program channels automatically:
1
Configure the antenna input source, if you have not already
done, see “ANT/CABLE IN” on page 51.
2
Press the MENU button to open the Setup menu.
Setting up your TV
Storing channels in memory (optional)
3
53
Highlight Installation, and then press the OK button.
(Sample Image) Auto tuning program channels
A new set of Installation menus appear.
4
Open the Terrestrial menu, highlight Channel Program to
open the Start Scan window, and then press the OK button to
begin channel programming.
(Sample Image) Auto tuning program channels
The TV will automatically cycle through all the antenna channels,
and store all active channels in the channel memory. While the TV
is cycling through the channels, the message “Scanning channels,
please wait” appears.
5
To cancel channel programming, press the EXIT button on the
remote control or highlight Cancel in the on-screen display,
and then press the OK button.
When channel programming is complete, press the CH
Up/Down arrow buttons to view the programmed channels.
54
Setting up your TV
Setting channel skip
Setting channel skip
To prevent a channel from being viewed, you can set it to be
skipped.
1
From the Setup menu, highlight Installation, and then press the
OK button.
2
Press the ( / arrow) buttons to select Channel Options, and
then press the OK button.
The list of channels appears.
(Sample Illustration) List of channels
3
Press the ( / arrow) buttons to select a channel position to
be skipped, and then press the OK button.
To remove the check, press the OK button again.
To add a channel to the channel memory:
Highlight the checked box next to the channel number you wish to
add, and then press the OK button to remove the check.
To block channels in the channel memory:
NOTE
1
You will not be able to tune blocked channels unless you unlock
them.
From the Channel Options menu, press the (
move to the channel lock list.
(Sample Illustration) Channel lock list
arrow) button to
Setting up your TV
Setting the HDMI® audio mode
2
55
Press the ( / arrow) buttons to select a channel position to
be locked, and then press the OK button. Enter your four-digit
PIN code.
A check appears in the box. To remove the check, press the OK
button again.
NOTE
3
If the PIN code has not been set yet, a warning message appears.
To save the setting, press the EXIT button.
To manually add digital sub-channels on a physical channel:
Use the Channel Numbers and the Dash/100 button on the remote
control to enter the channel number (for example, 56–1). If the
channel is found, the number will be added to the list and the box
will be unchecked.
If the channel is not found, a message appears.
NOTE
Skipped channels cannot be selected with the CH Up/Down arrow)
buttons; however, they can be accessed using the number keys on
the remote control.
To remove encrypted channels from the channel memory:
If an encrypted channel is accidentally added to the channel list
while programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel surfing.
When you tune to an encrypted channel, the following message
appears.
(Sample Illustration) Removing an encrypted channel
Press the 1 button while the message is displayed to remove the
unnecessary channel from the channel list.
Setting the HDMI® audio mode
To set the HDMI® audio mode:
1
Press the MENU button to open the Sound menu.
2
Highlight Audio Setup, and then press the OK button.
56
Setting up your TV
Setting the HDMI® audio mode
3
Press the ( / arrow) buttons to select HDMI 1 Audio, and
then press the ( / arrow) buttons to select the HDMI 1 audio
mode (Auto, Digital, or Analog). (Auto is the recommended
mode.) See “Connecting an HDMI® or DVI device to the
HDMI® input” on page 31.
(Sample Image) HDMI® Audio mode screen
Mode:
Description:
Auto
When viewing the HDMI 1 input, if digital audio from the HDMI®
input is available, it will be output. If not, the TV will automatically
detect and output analog audio from the PC Audio input.
Digital
When viewing the HDMI 1 input, digital audio from the HDMI®
input will be output.
Analog
When viewing the HDMI 1 input, analog audio from the PC Audio
input will be output.
4
NOTE
To save the setting, highlight Done, and then press the OK
button.
Because the PC and HDMI 1 inputs share the same set of analog
audio inputs, the PC Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to “No” the HDMI 1 Audio
setting changes to “Auto.” If PC Audio is set to “Yes” the HDMI 1
Audio setting is set to “Digital” and is grayed out in the menu. See
“Setting the PC Audio” on page 98.
Setting up your TV
Viewing the Digital Signal Meter
57
Viewing the Digital Signal Meter
You can view the digital signal meter in the ANT/ CABLE digital
TV input source only.
To view the digital signal meter:
1
Press the MENU button to open the Setup menu.
2
Highlight Installation, and then press the OK button.
A new set of Installation menu icons appear.
3
Open the Terrestrial menu, highlight Signal Meter, and then
press the OK button.
4
Press the ( / / / arrow) buttons to select the antenna input
and digital channel signal you wish to check.
5
If you want detailed information of the presentation channel,
Highlight Advanced, and then press the OK button.
NOTE
❖ The physical digital channel number listed in the Signal Meter
screen may not correspond to a virtual TV channel number.
Contact your local broadcasters to obtain the RF channel
numbers for your local digital stations.
❖ The signal strength does not change between virtual channels on
the same physical channel.
To close the screen and return to the Installation menu:
Highlight Done, and then press the OK button.
To return to normal viewing, press the CANCEL button.
Setting the time zone
The Time Zone setup allows you to specify the correct time zone
for your region. This feature allows the TV status information to
display the correct time zone information for your viewing area.
1
In the Setup menu, highlight Installation, and then press the
OK button.
2
Highlight Time Zone, and then press the OK button.
3
Press the ( / arrow) buttons to select the region, highlight
Done, and then press the OK button.
After the time zone has been set, you will be asked to set the current
Daylight Saving Time status.
58
Setting up your TV
Viewing the system status
To set the Daylight Saving Time status, press the ( / arrow)
buttons to select Yes or No, highlight Done, and then press the OK
button.
Viewing the system status
1
Press the MENU button to open the Setup menu.
2
Highlight Installation, and then press the OK button.
A new set of Installation menu icons appear.
3
Open the System Status menu, highlight System
Information, and then press the OK button.
4
Press the ( / arrow) buttons to scroll through the menu bar
to select Factory Defaults or Support Information.
The related information appears.
To close the screen and return to the Installation menu highlight
Done in the Support Information screen or highlight No in the
Factory Defaults screen, and then press the OK button.
To return to normal viewing, press the CANCEL button.
Reset Factory Defaults
1
Press the MENU button to open the Setup menu.
2
Highlight Installation, and then press the OK button.
A new set of Installation menu icons appear.
3
Open the System Status menu, highlight System
Information, and then press the OK button.
4
Press the ( / arrow) buttons to scroll through the menu bar
to select Factory Defaults.
5
Highlight Yes, and then press the OK button.
6
If a PIN code have been set, enter your PIN code.
7
Press the ( / arrow) buttons to select Done, and then press
the OK button.
A warning message appears.
8
Select Yes, and then press the OK button.
the TV turns off automatically after a few seconds. After the
TV turns off, unplug the TV power cord and then plug it in
again to complete the reset process.
9
To cancel the reset process, select No, and press the OK
button.
Chapter 6
Using the TV’s features
Selecting the video input source
To select the video input source to view:
59
1
Press the INPUT button on the remote control or TV control
panel.
2
Choose from the following options:
❖
Press 0-5.
❖
Repeatedly press the ( / arrow) buttons on the remote
control, and then press the OK button to change the input
setting.
❖
Repeatedly press the INPUT button on the remote control
or TV control panel to change the input setting.
60
Using the TV’s features
Selecting the video input source
❖
The current signal source displays in the top right corner
of the Input Selection screen.
Input Selection
0
1
2
3
4
5
ANT/CABLE
ANT/CABLE
Video/ColorStream HD
HDMI 1
HDMI 2
PC
DVD
0 - 5 / INPUT to Select
Navigate
(Sample Image) Input Selection screen
NOTE
❖ You can label the video input sources according to the specific
devices you have connected to the TV, see “Labeling the video
input sources” on page 61.
❖ Sources can be “hidden,” see “Labeling the video input sources”
on page 61.
❖ “No video signal” will appear randomly on the screen if no
signal is received in video input mode.
❖ If CEC device is connected to an HDMI® input, the
HDMI®-CEC icon appears.
If a HDMI®-CEC device with HDMI® switching capability
(e.g. Audio Receiver) is connected to the HDMI® input, press the
INPUT button on the remote control or TV control panel
repeatedly to highlight HDMI 1 or HDMI 2.
If the connected CEC device has any connected devices, a separate
device selection pop-up window appears:
(Sample Illustration) HDMI® setting pop-up window
Using the TV’s features
Labeling the video input sources
61
Press the INPUT button repeatedly to highlight the desired input
source, and then press the EXIT button.
NOTE
❖ When selecting HDMI®-CEC input sources from the pop-up
window using the INPUT button, some HDMI®-CEC devices
may automatically turn on.
❖ When selecting input sources using the ( / arrow) buttons,
you will need to press the OK button to actually select a
particular device from the pop-up window.
Labeling the video input sources
You can label each video input source according to the type of
device you have connected to each source. Choose from the
following preset list of labels:
❖
– – (default label)
❖
Audio Receiver
❖
Cable
❖
Compact Disc
❖
DTV
❖
DVD
❖
Game Console
❖
HDMI® Switch (HDMI® inputs only)
❖
Laser Disc
❖
Satellite/DSS
❖
VCR
❖
Video Recorder
❖
Hide (to hide an unused input in the Input Selection screen and
in the Channel Browser Inputs list)
NOTE
If you select PC in the Input Selection screen, you can choose only
“– –”, “Game Console”, or “Hide” as the label.
62
Using the TV’s features
Labeling the video input sources
To label the video input sources:
1
Press the MENU button to open the Preferences menu.
2
Highlight Input Labeling, and then press the OK button.
(Sample Image) Input Labeling screen
3
Press the ( / arrow) buttons to highlight the video source
you wish to label.
4
Press the ( / arrow) buttons to select the desired label for
that input source. If a particular input is not used, Hide can be
selected as the label. This will cause that input to be “grayed
out” in the Input Selection screen and skipped over when you
press the INPUT button on the remote control.
(Sample Image) Input Labeling screen - Done
5
To save the new input labels, highlight Done, and then press
the OK button.
Using the TV’s features
Tuning channels using the Channel Browser
63
Input labeling example:
The screen below left shows the default Input Selection screen
(with none of the inputs labeled as a specific device). The screen
below (right) is an example of how you can label the inputs if you
connected a VCR to ColorStream® HD, a video recorder to
HDMI 1, and a DVD player to HDMI 2.
No inputs labeled
All inputs labeled
(Sample Image) Input selection screens
To clear the input labels:
1
Press the MENU button to open the Preferences menu.
2
Highlight Input Labeling, and then press the OK button.
3
Highlight Reset, and then press the OK button.
Tuning channels using the Channel Browser
The Channel Browser provides an easy navigation interface for all
your channels and inputs. This feature allows you to:
❖
Navigate the contents of all of your inputs.
❖
Keep a list of your favorite channels, see “Favorites browser”
on page 64.
❖
Quickly surf and tune your recently viewed channels/inputs
from the Channel Browser History List.
❖
Surf via Browse mode (to immediately tune channels as you
highlight them in the Channel Browser) or Select mode (to surf
over channels in the Channel Browser before you select one to
tune).
❖
Quickly change inputs from the Inputs List.
❖
Quickly select HDMI®-CEC devices from the
HDMI®-CEC List.
64
Using the TV’s features
Tuning channels using the Channel Browser
Favorites browser
The Favorites Browser allows you to quickly configure a favorite
channels/inputs list that is integrated into the Channel Browser.
To add a favorite channel/input:
1
Tune to the channel or input.
2
Press and hold the FAV button for a few seconds.
NOTE
The channel or input is added to the beginning of the Favorites list
on the left side of the Channel Browser.
To delete a favorite channel/input:
1
Press the FAV button to open the Favorites browser list.
2
Highlight the channel or input to delete by pressing the BACK
CB/NEXT CB buttons.
3
Press and hold the Dash/100 button for a few seconds. The
channel/input will be removed from the Favorites list.
To configure the Channel Browser:
1
In the Preferences menu, highlight Channel Browser Setup,
and then press the OK button.
2
Press the ( arrow) button to highlight Navigation, and then
press the ( / arrow) buttons to select either Browse Mode
or Select Mode.
HDMI-CEC List
(Sample Image) Browser mode screen
3
NOTE
4
Press the ( arrow) button to highlight History List, and then
press the ( / arrow) buttons to select On/Off.
The History List will be cleared every time the TV is powered off.
Press the ( arrow) button to highlight ANT/CABLE List,
and then press the ( / arrow) buttons to select On/Off.
Using the TV’s features
Tuning channels using the Channel Browser
65
5
Press the ( arrow) button to highlight Inputs List, and then
press the ( / arrow) buttons to select On/Off.
6
Press the ( arrow) button to highlight Favorites List, and
then press the ( / arrow) buttons to select On/Off.
7
Press the ( arrow) button to highlight HDMI®-CEC List,
and then press the ( / arrow) buttons to select On/Off.
NOTE
8
HDMI®-CEC List is automatically grayed out and set to Off when
Enable HDMI®-CEC is switched to Off. See “Using HDMI®-CEC” on
page 108.
To save the new entries, highlight Done, and then press the
OK button. To return to factory defaults, highlight Reset, and
then press the OK button.
To open the Channel Browser:
❖
Press the BACK CB/NEXT CB buttons on the remote control.
❖
Press the ( arrow) button to surf backward through the
previously tuned channels in the History list, the channels in
the ANT/ CABLE channel list, the inputs in the Inputs list, the
favorite channels/inputs in the Favorites list, or the
HDMI®-CEC devices in the HDMI®-CEC List.
❖
Press the ( arrow) button to surf forward through the channel
History, the ANT/CABLE channel list, the Inputs list, the
favorite channels/inputs in the Favorites list, or the
HDMI®-CEC List.
Elements of the Channel Browser
(Sample Illustration) Channel Browser elements
1
Current list (History, ANT/CABLE, Inputs, Favorites, or
HDMI®-CEC)
2
Input type
3
Channel or input currently being viewed
66
Using the TV’s features
Tuning channels using the Channel Browser
4
Channel or input that is currently highlighted in the browser
5
Channels stored in the History List
To toggle among the available lists:
After opening the Channel Browser, press the ( / arrow) buttons
to toggle through the History, ANT/CABLE, Inputs, Favorites,
or HDMI®-CEC options.
NOTE
❖ The Channel Browser opens in History List by default. Once
another list has been selected, the Channel Browser will open in
the last selected list.
❖ If all lists are turned off, pressing the BACK CB/NEXT CB
buttons or the FAV button will not display the Channel Browser.
If Favorites List is turned off, the FAV button will have no effect.
❖ Pressing the FAV button will display the Channel Browser
Favorites list regardless of the last selected list in the Channel
Browser.
To tune to a channel or input in Browse mode:
1
While watching TV, press the BACK CB/NEXT CB buttons
to display the Channel Browser and surf back to a previous
item or surf forward to the next item in the list. In Browse
mode, when you stop on an item in the Channel Browser, it is
highlighted and the TV automatically tunes to the channel or
input.
2
Press the EXIT button to close the Channel Browser.
To tune to a channel or input in Select mode:
1
While watching TV, press the BACK CB/NEXT CB buttons
to display the Channel Browser and surf back to a previous
item or surf forward to the next item in the list. In Select mode,
when you stop on an item in the Channel Browser, it is
highlighted, but you must press the OK button to tune the TV
to the highlighted item.
2
Press the OK button to tune the TV to the highlighted item.
3
Press the EXIT button to close the Channel Browser.
Using the TV’s features
Tuning channels
67
Adding and clearing channels and inputs in the History List
Adding channels and inputs to the History List:
As a channel or input is tuned, the Channel Browser adds it to the
History List and displays it on the right side of the Channel
Browser. Previously tuned channels/inputs are shifted to the left,
eventually moving off the left side. Press the BACK CB button to
surf backward through the previously tuned channels/inputs. Any
channel or input that is tuned repeatedly will not be repeated in the
History List, but instead is moved to the end of the list on the right
side of the Channel Browser.
The Channel Browser will store the following channels:
❖
All channels that are tuned using the numeric buttons on the
remote control.
❖
All channels that are tuned using the CH Up/Down buttons on
the remote control.
NOTE
Whenever an item is selected that cannot be tuned (for various
reasons), the TV will automatically tune to the previously viewed
channel or input.
Clearing channels from the History List:
❖
Reconfiguring the ANT/CABLE input will clear the History
List.
❖
Turning off the TV will clear the History List.
Tuning channels
To tune to the next programmed channel, use the CH Up/Down
buttons on the remote control or TV control panel.
Tuning to a specific channel (programmed or unprogrammed)
Tuning analog channels:
Press the Channel Number (0–9) buttons on the remote control. For
example, to select channel 125, press 1, 2, 5, and then press the OK
button.
Tuning digital channels:
Press the Channel Number (0–9) buttons on the remote control,
followed by the Dash/100 button, and then the sub-channel
number. For example, to select digital channel 125-1,
press 1, 2, 5, –, 1, and then press the OK button.
68
Using the TV’s features
Tuning channels
Tuning to the next programmed channel
Tuning analog channels:
Press the Channel Number (0–9) buttons on the remote control. For
example, to select channel 125, press 1, 2, 5, and then press the OK
button.
Tuning digital channels:
Press the Channel Number (0–9) buttons on the remote control,
followed by the Dash/100 button, and then the sub-channel
number. For example, to select digital channel 125-1,
press 1, 2, 5, –, 1, and then press the OK button.
NOTE
If a digital channel is not programmed, either through the automatic
channel scan or the Channel add function, see “Auto Tuning” on
page 52, you will have to tune the RF channel using the Channel
Numbers and the Dash/100 button on the remote control.
Switching between two channels using Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number buttons
(and the Dash/100 button if selecting a digital channel).
3
Press the CH RTN button on the remote control. The previous
channel will display. Each time you press the CH RTN button,
the TV will switch back and forth between the last two
channels that were tuned.
NOTE
If you press the CH RTN button from a non-antenna input, the TV will
return to the last-viewed input.
Switching between two channels using SurfLock™
The SurfLock™ feature temporarily “memorizes” one channel to
the CH RTN button, so you can return to that channel quickly from
any other channel by pressing the CH RTN button.
To memorize a channel to the CH RTN button:
1
Tune the TV to the channel you wish to program into the
CH RTN button.
Using the TV’s features
Selecting the picture size
69
2
Press and hold the CH RTN button for a few seconds until the
message “Memorized” appears on the screen. The channel has
been programmed to the CH RTN button.
3
You can then change channels repeatedly, and when you press
the CH RTN button, the memorized channel will be tuned.
The TV will return to the memorized channel one time only. Once
you press the CH RTN button and then change channels again, the
CH RTN memory will be cleared and the button will function as
Channel Return, by switching back and forth between the last two
channels that are tuned.This feature also works for external inputs.
Selecting the picture size
You can view many program formats in several picture sizes—
Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3,
Normal, and Dot by Dot.
NOTE
The picture size illustrations are examples only. The format of the
image (in any of the picture sizes) depends on the format of the
signal you are currently watching. Select the picture size that
displays the current program in the way that looks best to you.
You can save separate picture size preferences for each input on
your TV.
To select the picture size:
1
Press the MENU button on the remote.
2
With the Picture Size menu is displayed, do one of the
following:
NOTE
❖
Repeatedly press the PIC SIZE button.
❖
Press the corresponding number button (0-5) while the
Picture Size menu is displayed.
❖
Press the ( / arrow) buttons while the Picture Size
menu is displayed.
Using these functions to change the picture size (i.e., changing the
height/width ratio) for any purpose other than your private viewing
may be prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal liability.
70
Using the TV’s features
Selecting the picture size
To select the picture size using the menus:
1
Select Picture Size in the Theater Settings menu.
2
Press the ( /
setting.
3
Highlight Done, and then press the OK button.
arrow) buttons to select the desired picture size
NOTE
Some of the picture sizes may not be available depending on the
receiving signal format (those will be “grayed out” in the Picture Size
screen).
NOTE
If you select a TheaterWide® picture size, the top and bottom edges
of the picture (including subtitles or captions) may be hidden. To
view these edges, adjust the Picture Position or try viewing the
program in 4:3 or Full, see “Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)” on page 73.
Full
This setting is for viewing in the 16:9 (480i, 480p) source programs
only.
(Sample Illustration) Picture size - Full 16:9
If receiving a squeezed 4:3 format program, the picture is stretched
horizontally to fill the width of the screen but not stretched
vertically.
This setting is for viewing in the 1080i, 1080p, and 720p program
source.
(Sample Illustration) Picture size - Full
The edges of the picture may be hidden.
Using the TV’s features
Selecting the picture size
71
TheaterWide 1
This setting is for viewing in 4:3 format programs.
(Sample Illustration) Picture size - TheaterWide 1
The center of the picture remains close to its original proportion,
but the left and right edges are stretched horizontally to fill the
screen.
TheaterWide 2
This setting is for viewing letter box programs.
(Sample Illustration) Picture size - TheaterWide 2, letter box
The picture’s top and bottom edges may be hidden*.
TheaterWide 3
This setting is for viewing letter box programs with subtitles.
(Sample Illustration) Picture size - TheaterWide 3, letter box with
subtitles
The picture’s top and bottom edges are hidden*.
72
Using the TV’s features
Selecting the picture size
Native
These settings are for viewing in 480i (HDMI®), 480p (HDMI®),
720p, 1080i, and 1080p signal programs).
(Sample Illustration) Picture size - Native
❖
If receiving a 1080i, 1080p, 720p, 480i (HDMI®), or 480p
(HDMI®) signal program, the video is scaled to display the
entire picture within the borders of the screen (i.e. no
over-scanning).
❖
This is especially useful for external HD sources such as
DVHS movies, Video Games, or computer graphics.
❖
None of the picture is hidden.
NOTE
❖ This mode is supported only for HDMI® (1080i, 1080p, 720p,
480i, and 480p), ColorStream® (1080i and 720p), and
ANT/CABLE (digital) inputs (1080i, 1080p, and 720p).
❖ Depending on the input signal, the picture’s border may be
hidden, displayed in black, or noisy.
4:3
(Sample Illustration) Picture size - 4:3
Some program formats will display with sidebars and/or bars at the
top and bottom.
Using the TV’s features
Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)
73
Normal
This setting is for viewing VGA, SVGA, XGA, WXGA, and
SXGA sources.
(Sample Illustration) Picture size - Normal
This size is a non-stretched display. Some input signal formats will
display with sidebars and/or bars at the top and bottom.
Dot by Dot
This setting is for viewing VGA, SVGA, XGA, WXGA, and
SXGA sources.
(Sample Illustration) Picture size - Dot by Dot
“Dot by Dot” is a non-scaling display. Depending on the input
signal format, the picture appears with sidebars and/or bars at the
top and bottom, for example, VGA input source).
* To view the hidden areas (such as subtitles or captions), see
“Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)”
on page 73.
Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
1
Press the MENU button and open the Picture menu.
74
Using the TV’s features
Using the Auto Aspect feature
2
Highlight Theater Settings, and then press the OK button.
(Sample Image) Theater settings screen
3
In the Picture Size field, select either TheaterWide 2 or
TheaterWide 3
NOTE
You cannot scroll in any other mode.
4
Press the (
arrow) button to select the Picture Scroll field.
5
Press the ( / arrow) buttons to scroll the picture up and
down as needed.
6
To save the new settings, highlight Done, and then press the
OK button. To revert to the factory defaults, highlight Reset
and then press the OK button.
The adjustment range is from –5 to +10.
Using the Auto Aspect feature
When this feature is set to On, the TV will automatically select the
picture size when one of the following input sources is received:
❖
A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE input
❖
A 480i signal from the ColorStream® HD or Video input
❖
480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from
the HDMI® 1/2 input
Aspect Ratio of
Signal Source
Automatic Aspect Size (automatically selected when Auto
Aspect is On)
4:3 Normal
4:3
4:3 Letter Box
TheaterWide 2
16:9 Full
Full
Using the TV’s features
Selecting the cinema mode
Aspect Ratio of
Signal Source
75
Automatic Aspect Size (automatically selected when Auto
Aspect is On)
Not defined (no ID-1
The current picture size you set under, see “Selecting the
data or HDMI® aspect
picture size” on page 69.
data)
NOTE
The auto aspect ratio feature is not applicable to the PC input.
To turn on the auto aspect ratio feature:
1
Press the MENU button and open the Picture menu.
2
Highlight Theater Settings, and then press the OK button.
3
To save the new settings, highlight Done, and then press the
OK button. To revert to the factory defaults, highlight Reset
and then press the OK button.
To turn off the Auto Aspect ratio feature, Select Off in step 3
above.
Selecting the cinema mode
When you view a DVD (3:2 pulldown processed) from a DVD
player connected to the VIDEO, ColorStream® HD (component
video), or HDMI® inputs on the TV, smoother motion can be
obtained by setting the Cinema Mode to Film.
To set the Cinema Mode to Film:
(available for 480i and 1080i signals)
1
Press the MENU button and open the Picture menu.
2
Highlight Picture Settings, and then press the OK button.
3
Highlight Advanced Picture Settings, and then press the OK
button.
4
In the Cinema Mode field, select Film.
5
To set Cinema Mode to Video, Select Video in Step 4 above.
Using the FREEZE feature
To use the FREEZE feature:
1
When watching the TV, press the FREEZE button to freeze
the picture.
2
To unfreeze the picture, press the FREEZE button again
(or any other button).
76
Using the TV’s features
Adjusting the picture
NOTE
Using the FREEZE function for any purpose other than your private
viewing may be prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil and criminal
liability.
NOTE
If the TV is left in FREEZE mode for more than 15 minutes, the
FREEZE mode will automatically release and the TV returns to normal
video.
Adjusting the picture
Selecting the picture mode
You can select your desired picture settings from the modes
described below.
Mode:
Description:
Dynamic
Bright and dynamic picture (factory setting)
Standard
Standard picture settings (factory setting)
Movie
Lower contrast for darkened room (factory setting)
PC
Designed for viewing of PC tables and documents
Preference
Your personal preferences
NOTE
PC mode is available for HDMI® and PC inputs only (other input
sources are grayed out).
To select the picture mode using the menu system:
1
Press the MENU button and open the Picture menu.
Using the TV’s features
Adjusting the picture
2
77
Highlight Mode, and then press the OK button.
(Sample Image) Mode screen
3
Press the ( /
arrow) buttons, and then press the OK button.
(Sample Image) Mode selections screen
Adjusting the picture quality
You can adjust the picture quality (Contrast, Backlight,
DynaLight™, Brightness, Color, Tint, and Sharpness.) to your
personal preferences.
Selection
Pressing ( )
Pressing ( )
Contrast
lower
higher
darker
lighter
DynaLight **
On/Off
On/Off
Brightness
darker
lighter
Color
paler
deeper
Tint
reddish
greenish
Sharpness
softer
sharper
Backlight*
®
* Backlight: Adjusts the brightness of the entire screen. When in video mode
and no signal is input, this selection is automatically set to 0. (Settings are
stored in memory.)
78
Using the TV’s features
Using closed captions
**DynaLight®: This function automatically strengthens the black coloring of
dark areas in the video according to the level of darkness.
To adjust the picture quality:
1
Press the MENU button and open the Picture menu.
2
Highlight Picture Settings, and then press the OK button.
3
Press the ( / arrow) buttons to select the picture quality you
wish to adjust (Contrast, Backlight, DynaLight, Brightness,
Color, Tint, or Sharpness), and then press the ( / arrow)
buttons to adjust the setting.
4
To save the new settings, highlight Done, and then press the
OK button. You can use any of the picture modes, see
“Selecting the picture mode” on page 76, as a starting point for
adjusting the picture settings. To revert back to the base mode
that you began adjusting the picture settings from, highlight
Reset, and then press the OK button.
The picture qualities you adjusted are automatically saved in the
Preference mode, see “Selecting the picture mode” on page 76 until
Reset is selected.
Using closed captions
Closed caption mode has two options:
❖
Captions—An on-screen display of the dialogue, narration and
sound effects of TV programs and videos that are closed
captioned (usually marked “CC” in program guides).
❖
Text—An on-screen display of information not related to the
current program, such as weather or stock data (when provided
by individual stations).
To view captions or text:
1
Press the MENU button to open the Preferences menu, and
then highlight Base CC Mode.
2
Press the ( / arrow) buttons to select the desired closed
caption mode, and then press the OK button.
Using the TV’s features
Using closed captions
79
To view captions, highlight CC1, CC2, CC3, or CC4.
(CC1 displays translation of the primary language in your area.)
(Sample Illustration) Viewing captions
NOTE
If the program or video you selected is not closed captioned, no
captions will display on-screen.
To view text, highlight T1, T2, T3, or T4.
(Sample Illustration) Captions - text
NOTE
If text is not available in your area, a black rectangle may appear on
screen. If this happens, set the Base CC Mode to Off.
To turn off closed caption mode, select Off in step 2 above.
NOTE
A closed caption signal may not display in the following situations:
❖ When a recording has been dubbed
❖ When the signal reception is weak
❖ When the signal reception is non-standard
80
Using the TV’s features
Using closed captions
Digital CC settings
You can customize the closed caption display characteristics by
changing the background color, opacity, text size, type, edge, and
color.
NOTE
❖ These settings are available for digital channels only.
❖ You cannot set Caption Text and Background as the same color.
To customize closed captions:
1
Press the MENU button to open the Preferences menu.
2
Highlight Digital CC Settings, and then press the OK button.
3
Press the ( / arrow) buttons to highlight the characteristic
you wish to change, and then press the ( / arrow) buttons to
select the format for that characteristic.
4
To save the new settings, highlight Done, and then press the
OK button.
5
To revert to the factory defaults, highlight Reset, and then
press the OK button.
Mode:
Description
Caption size
Auto, Small, Standard, Large
Caption text type
Auto, Default, Mono (with Serif), Prop. (with Serif), Mono
(without Serif), Prop. (without Serif), Casual, Cursive, Small
Capitals
Caption text edge
Auto, None, Raised, Depressed, Uniform, Left Drop Shadow,
Right Drop shadow
Caption text color
Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan
Text foreground opacity
Auto, Transparent, Translucent, Flashing, Solid
Background color
Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan
Text background opacity
Auto, Transparent, Translucent, Flashing, Solid
Caption text edge color
Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan
CC Selector
You can use the CC Selector to temporarily override the default
analog caption mode (set in Base CC Mode) for a particular
channel. However, once you change to another channel, the closed
Using the TV’s features
Adjusting the audio
81
caption setting will automatically change back to the current Base
CC Mode setting.
You can also use the CC Selector to select digital closed caption
services, if available. When such services are not available, the CC
Selector presents a default list of services. If the selected service is
not available, the next best service will be used.
To select closed captions:
1
Press the MENU button to open the Preferences menu.
2
Highlight CC Selector, and then press the OK button.
3
Press the ( / arrow) buttons to select the Closed Caption,
and then press the ( / arrow) buttons to select the desired
service.
4
To save the new settings, highlight Done, and then press the
OK button.
5
Press the EXIT button.
NOTE
You can also press the SUBTITLE button to open CC Selector and
follow the instructions.
Adjusting the audio
Muting the sound
Press the MUTE button to partially reduce (1/2 Mute) or turn off
(Mute) the sound. Each time you press the MUTE button, the mute
mode changes in the following order: 1/2 Mute, Mute, Volume, 1/2
Mute, etc.
(Sample Image) Levels of mute
If closed caption mode is set to Off when selecting MUTE mode,
the closed caption feature becomes active if the TV program is
closed captioned. To mute the audio without activating the closed
captioning, press the VOL (–) button to set the volume to 0.
For more information, see “Using closed captions” on page 78.
NOTE
If you modify items in the SOUND menu while Mute is active, Mute
is cancelled.
82
Using the TV’s features
Adjusting the audio
Using the digital audio selector
You can use the Digital Audio Selector to conveniently switch
between audio tracks on a digital channel (for those channels that
have multiple audio tracks). This temporarily overrides the audio
track chosen by the language option under Audio Setup, see
“Selecting stereo/SAP broadcasts” on page 82.
1
Press the MENU button to open the Sound menu.
2
Highlight Digital Audio Selector, and then press the OK
button.
(Sample Image) Digital Audio Selector screen
3
Press the ( /
arrow) buttons to select the desired service.
4
Press the EXIT button.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to output
high-fidelity stereo sound. MTS also can transmit a second audio
program (SAP) containing a second language, music or other audio
information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the stereo mark or
word “SAP” appears when the DISPLAY button is pressed. The
MTS feature is only available for analog signals on the
ANT/CABLE input.
To listen in stereo sound:
1
Press the MENU button to open the Sound menu.
2
Highlight Audio Setup, and then press the OK button.
3
In the MTS field, select Stereo.
4
To save the new settings, highlight Done, and then press the
OK button.
5
To reset the settings to the factory defaults, highlight Reset,
and then press the OK button.
Using the TV’s features
Adjusting the audio
NOTE
83
❖ You can typically leave the TV in Stereo mode because it outputs
the type of sound being broadcast (stereo or monaural).
❖ If the sound is noisy, select Mono to reduce the noise.
To listen to an alternate language on an ATSC digital station (if
available), highlight the Language field in step 3 above, and then
press the ( / arrow) buttons to select the language you prefer.
To listen to a second audio program on an analog station, if
available, select SAP in step 3 above.
1
Press the MENU button. Select Settings, SOUND, MTS.
2
Press the ( /
button.
NOTE
arrow) buttons to select SAP. Press the EXIT
❖ A second audio program (SAP) can be heard only on those TV
stations that offer it. For example, a station might broadcast
another language as a second audio program. If you have SAP
on, you will see the current program on the screen but hear the
other language instead of the program’s normal audio.
❖ If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station’s normal
audio will be output. However, occasionally there is no sound at
all in SAP mode. If this happens, set the MTS feature to Stereo
mode.
Using the MTS button
If you press the AUDIO button when an analog channel is tuned,
the Analog Audio bar appears and displays Stereo, SAP, Mono as
the options.
If you press the AUDIO button when a digital channel is tuned, the
Digital Audio bar will appear and offer different audio choices for
the digital channel.
If you press the AUDIO button when an external input is selected,
no Audio bar appears.
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble and
balance.
84
Using the TV’s features
Adjusting the audio
To adjust the audio quality:
1
Press the MENU button to open the Sound menu.
2
Highlight Audio Setup, and then press the OK button.
3
Press the ( / arrow) buttons to highlight the item you wish
to adjust (Bass, Treble, or Balance).
4
Press the ( /
arrow) buttons to adjust the level.
❖
makes the bass or treble weaker or increases the balance
in the left channel (depending on the item selected).
❖
makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
5
To save the new settings, highlight Done, and then press the
OK button.
6
To reset the settings to the factory defaults, highlight Reset,
and then press the OK button.
Audyssey Premium Television™
These televisions use a suite of technologies for better sound
including:
❖
Audyssey EQ®- provides clear, accurate and natural sound
right out of the box. This technology ensures you enjoy your
audio experience as much as your video.
❖
Audyssey ABX™- technology uses sophisticated driver
analysis and low frequency monitoring to extend the range and
bass of small speakers. This enables the system to produce
lower frequencies than would be possible with a traditional
system of the same size.
❖
Audyssey® Dynamic Volume- automatically adjusts volume to
provide a consistent sound level between television programs,
commercials, and between the loud and soft passages of
movies.
Audyssey ABX™
Audyssey ABX™ technology uses sophisticated driver analysis
and low frequency monitoring to extend the range and bass of small
speakers.
To turn on Audyssey ABX™:
1
Press the MENU button and open the Sound menu.
Using the TV’s features
Adjusting the audio
2
Highlight Audio Settings, and the press the OK button.
3
Press the ( / arrow) buttons to highlight the Audyssey
ABX™ field.
4
Press the ( /
85
arrow) buttons to select On.
Using Audyssey Dynamic Volume®
This feature provides a consistent sound volume between television
programs, commercials, and between the loud and soft passages of
movies.
1
Press the MENU button. Select Settings, SOUND, Audyssey
Premium Television, Dynamic Volume.
2
Press the ( /
NOTE
arrow) buttons to select ON or Off.
❖ If Dynamic Range Control is set to On, this feature is
automatically set to Off.
❖ This feature does not affect the audio signal output from the
DIGITAL AUDIO OUT terminal.
Selecting the optical audio output format
You can select the optical audio output format when you connect a
Dolby® Digital decoder or other digital audio systems to the TV’s
Digital Audio Out terminal.
To select the optical audio output format:
1
Press the MENU button to open the Sound menu.
2
Highlight Audio Setup, and then press the OK button.
3
In the Optical Output Format field, select either Dolby
Digital or PCM, depending on your device.
4
To save the new settings, highlight Done, and then press the
OK button.
5
To reset the settings to the factory defaults, highlight Reset,
and then press the OK button.
Using the Dolby® Digital Dynamic Range Control feature
You can further compress Dolby® Digital dynamic range, allowing
you to switch from digital to analog broadcasts at the same dynamic
range.
86
Using the TV’s features
Using the Locks menu
To use the Dolby® Digital Dynamic Range Control:
1
Press the MENU button to open the Sound menu.
2
Highlight Audio Setup, and then press the OK button.
3
In the Dolby® Digital Dynamic Range Control field, select
either Compressed. When Standard is selected, the audio
outputs with minimal compression.
4
To save the new settings, highlight Done, and then press the
OK button.
5
To reset the settings to the factory defaults, highlight Reset,
and then press the OK button.
NOTE
❖ This feature is available when tuned to a digital RF channel with
the Dolby® Digital signal.
❖ The Dolby® Digital Dynamic Range Control will function in
relation to Digital Output Format (PCM mode).
Using the Locks menu
The Locks menu includes the Enable Rating Blocking, Edit Rating
Limits, Input Lock, Panel Lock, GameTimer and New PIN Code
features. You can use these features after entering the correct PIN
code.
Entering the PIN code
1
Press the MENU button to open the Locks menu.
(Sample Image) Lock menu screen (for USA region)
Using the TV’s features
Using the Locks menu
2
Press the (
screen.
87
arrow) button to display the PIN code entry
The Lock System screen appears if a PIN code has not been
stored.
(Sample Image) Lock menu - store PIN screen
3
4
NOTE
Press the Channel Number buttons to enter a new four-digit
code, enter the code a second time to confirm, and then press
the OK button.
The Locks/Active screen appears if the PIN code is already
stored.
Use the Number buttons to enter your four-digit code, and then
press the OK button.
If the wrong PIN code is entered, the message “Incorrect PIN code,
please try again!” appears.
5
Highlight Retry, and then press the OK button.
6
Enter the code again, and then press the OK button.
When the correct PIN code is entered, the Locks menu opens.
Forgotten PIN code
While the PIN code entering screen is displayed, press the INFO
button four times within five seconds. The PIN code will be cleared
and you can enter a new PIN code.
Changing your PIN code
1
Press the MENU button to open the Locks menu.
2
Press the (
screen.
3
Enter your four-digit PIN code, and then press the OK button.
arrow) button to display the PIN code entering
88
Using the TV’s features
Using parental controls (for USA region)
4
Press the ( arrow) button to highlight New PIN Code, and
then press the OK button.
5
Press the Number buttons to enter a new four-digit code.
Reenter the PIN code to confirm it.
6
Press the OK button.
The new PIN code is now active.
NOTE
The PIN code cannot be set to “0000.”
Using parental controls (for USA region)
Blocking TV programs and movies by rating (V-Chip)
Some TV programs and movies include signals that classify the
content of the program (as unsuitable for younger viewers). The
V-Chip feature in this TV detects the signals and blocks the
programs according to the ratings you select.
1
Press the MENU button to open the Locks menu.
2
Press the (
screen.
3
Enter your four-digit PIN code, and then press the OK button.
4
Press the ( arrow) button to highlight Enable Rating
Blocking, and then press the OK button.
5
Press the (
arrow) button to display the PIN code entering
arrow) button to select On.
(Sample Image) Locks menu - Enable Rating Blocking selection
(for USA region)
Using the TV’s features
Using parental controls (for USA region)
89
(Sample Image) Locks menu screen for other regions
6
Press the ( arrow) button to highlight Edit Rating Limits,
and then press the OK button.
7
Press the ( / / /
button.
arrow) buttons, and then press the OK
A box with an “X” is a rating that will be blocked. As you
highlight a rating, a definition for the rating appears at the
bottom of the screen.
8
NOTE
To save the new settings, highlight Done, and then press the
OK button.
Above selection of blocking level is for U.S V-Chip system. For
Canada rating, you can highlight “Canada RS,” and then press the
OK button. Another “Canadian Rating Menu” screen appears.
Downloading an additional rating system
In the future, an additional rating system may become available for
use in selectively blocking TV programs and movies.
NOTE
The currently tuned station must be receiving a digital signal before
an additional rating system can be downloaded.
To download the additional rating system, if available:
1
Press the MENU button to open the Locks menu.
2
Press the (
screen.
3
Enter your four-digit PIN code, and then press the OK button.
4
Press the ( arrow) button to highlight Enable Rating
Blocking, and then press the OK button.
arrow) button to display the PIN code entering
90
Using the TV’s features
Using parental controls (for USA region)
5
Press the (
arrow) button to select On.
6
Press the ( arrow) button to highlight Edit Rating Limits,
and then press the OK button.
The Edit Rating Limits screen appears.
7
Highlight Alt RS, and then press the OK button.
The Edit Alternate Ratings screen appears.
NOTE
❖ The Alt RS button will only be available if an additional rating
system is currently available.
❖ It may take several minutes for the TV to download the additional
rating system.
❖ The information displayed in the Alternate Ratings screen will
depend on the configuration of the additional rating system
available at the time of download.
8
Press the ( / / /
button.
arrow) buttons, and then press the OK
A box with an “X” is a rating that will be blocked.
9
To save the new settings, highlight Done, and then press the
OK button.
10 In the Edit Rating Limits screen, highlight Done, and then
press the OK button.
NOTE
❖ The additional rating system can only be downloaded one time.
You will not be able to download any updates to the rating
system should such updates become available.
❖ The additional rating system is not designed, transmitted or
controlled by the TV or Toshiba, nor is the availability of an
additional rating system determined or controlled by Toshiba.
Similarly, the rating of programs in an additional rating system is
not determined, transmitted or controlled by the TV or Toshiba.
❖ The additional rating system is an evolving technology;
therefore, availability, content and format may vary.
Using the TV’s features
Using parental controls (for USA region)
91
Rating system
Independent rating system for broadcasters:
Ratings:
TV-MA
TV-14
TV-PG
TV-G
TV-Y7,
TV-Y7FV
Description and Content themes:
Mature Audience Only (This program is specifically designed to be viewed
by adults and therefore may be unsuitable for children under 17.
L) Crude or indecent language
S) Explicit sexual activity
V) Graphic violence
Parents Strongly Cautioned (This program contains some material that
many parents would find unsuitable for children under 14 years of age.)
D) Intensely suggestive dialogue
L) Strong, coarse language
S) Intense sexual situations
V) Intense violence
Parental Guidance Suggested (This program contains material parents may
find unsuitable for younger children.)
D) Some suggestive dialogue
L) Infrequent coarse language
S) Some sexual situations
V) Moderate violence
General Audience (Most parents would find this program suitable for all
ages)
Directed to Older Children (This program is designed for children age 7 and
above.
NOTE: Programs in which fantasy violence may be more intense or more
combative than other programs in this category are designated TV-Y7FV.)
TV-Y
All Children (This program is designed to be appropriate for all children)
Independent rating system for movies:
Ratings:
X
NC-17
R
PG-13
PG
G
Description and Content themes:
X-rated (For adults only)
Not intended for anyone 17 and under
Restricted (Under 17 requires accompanying parent or adult)
Parents Strongly Cautioned (Some material may be inappropriate for
children under 13)
Parents Strongly Cautioned (Some material may be inappropriate for
children under 13)
General Audience (Appropriate for all ages)
92
Using the TV’s features
Using parental controls (for USA region)
Indication other than rating system:
Display:
Description:
NONE
The program is rated None.
(No rating appears) No rating information is provided.
NOTE
If you place an “X” in the box next to “None” Rated, programs rated
“None” or “Not Rated” will be blocked; Programs that do not provide
any rating information will not be blocked.
Displaying ratings
To display the rating of the program you are watching, press the
INFO button on the remote control. If it is rated “None” the word
“NONE” appears in the INFO screen. If rating information is not
provided, no rating will appear in the INFO screen.
(Sample Image) Enable Rating Blocking screen
Blocking TV programs by Canada rating
1
Press the MENU button to open the Locks menu.
2
Press the (
screen.
3
Enter your four-digit PIN code, and then press the OK button.
4
Press the (
Blocking.
arrow) button to highlight Enable Rating
5
Press the (
arrow) button to select On.
6
Press the ( arrow) button to highlight Edit Rating Limits,
and then press the OK button.
arrow) button to display the PIN code entering
The Edit Rating Limits screen appears.
7
Highlight Canada RS, and then press the OK button.
The Canadian Rating Menu screen appears.
Using the TV’s features
Using parental controls (for USA region)
8
93
Press the ( / / / arrow) buttons, and then press the OK
button to select the level of blocking you prefer.
A box with an “X” is a rating that will be blocked.
9
To save the new settings, highlight Done, and then press the
OK button.
10 In the Edit Rating Limits screen, highlight Done, and then
press the OK button.
Rating system for programs in English:
Ratings:
E
C
C8+
G
PG
14+
18+
Description and Content themes:
Exempt shows
Children ages of 2 to 7 years
Children ages of 8 years and older
General programming
Parental Guidance
Viewers 14 and older
Adult programming
Rating system for programs in French:
Ratings:
E
G
8 ans+
13 ans+
16 ans+
18 ans+
Description and Content themes:
Exempt shows
General programming
Not recommended for ages under 8
Not recommended for ages under 13
Not recommended for ages under 16
Programming restricted to adults
Unlocking programs temporarily
If you try to tune to a program that exceeds the rating limits you
have set, the TV will enter program lock mode and a warning
message appears on the screen. Follow the instructions to
temporarily unlock the program.
(Sample Illustration) Warning - exceeded rating limit
You can either temporarily unlock the program or select an
unlocked program to watch.
94
Using the TV’s features
Using the input lock feature
To temporarily unlock the program:
1
Press the MUTE button.
2
Enter your four-digit PIN code, and then press the OK button.
If the correct code is entered, the program lock mode is
released and the normal picture appears. All locking will be
enabled again when you change the channel.
Using the input lock feature
You can use the Input Lock feature to lock the video inputs (Video,
ColorStream® HD, HDMI 1, HDMI 2, and PC) and channels 3 and
4. You will not be able to view the input sources or channels until
you unlock the inputs.
To lock/unlock the video inputs:
1
From the Locks menu, press the (
the PIN code entering screen.
2
Enter your four-digit PIN code, and then press the OK button.
3
Press the ( arrow) button to highlight Input Lock, and then
press the ( arrow) button to select the level of video input
locking you prefer.
Mode:
Video
Video+
arrow) button to display
Description:
Locks Video, ColorStream® HD, HDMI 1, HDMI 2 and PC.
Locks Video, ColorStream® HD, HDMI 1, HDMI 2, PC and channels 3 and
4. Select Video+ if you play video tapes via an ANT/CABLE input.
Unlocks all video inputs and channels 3 and 4.
Off
4
Press the EXIT button.
Locking channels
With the Lock feature, you can lock specific channels. Locked
channels can only be accessed by entering the PIN code, see
“Entering the PIN code” on page 86.
To lock channels:
1
From the Setup menu, highlight Installation, and then press
the OK button.
2
Press the OK button to select Terrestrial.
95
Using the TV’s features
Locking channels
3
Press the ( / arrow) buttons to select Channel Options, and
then press the OK button.
The list of channels appear.
(Sample Illustration) Channel options
4
Press the ( arrow) button, and then press the ( /
buttons to select a channel in the lock column.
5
Press the OK button.
arrow)
PIN code entry will be required to set a locked channel.
NOTE
If the PIN code has not yet been set, a warning message appears.
6
A check appears in the box.
7
To remove the check, press the OK button.
8
Press the EXIT button.
Using the GameTimer®
You can use the GameTimer® to set a time limit for playing a video
game (30–120 minutes). When the GameTimer® expires, the TV
enters Input Lock mode and locks out the input source for the video
game device.
To set the GameTimer®:
1
From the Locks menu, press the (
the PIN code entering screen.
arrow) button to display
2
Enter your Four-digit PIN code, and then press the OK button.
3
Press the ( arrow) button to highlight GameTimer, and press
the ( arrow) button to select the length of time until the Input
Lock is activated (30, 60, 90 or 120 minutes).
4
Press the ( /
minutes.
arrow) buttons to select 30, 60, 90, or 120
96
Using the TV’s features
Locking channels
To cancel the GameTimer®, select Off in step 3 above.
To deactivate the Input Lock once the GameTimer® has activated it:
❖
NOTE
Set the Input Lock to Off, see “Using the GameTimer®” on
page 95.
❖ A message appears when 10 minutes, 3 minutes, and 1 minute
are remaining.
❖ If the TV loses power with time remaining, the TV will enter Input
Lock mode when power is restored (as if the GameTimer had
been activated). You must deactivate the Input Lock, see “Using
the GameTimer®” on page 95.
Using the panel lock feature
You can lock the control panel to prevent your settings from being
changed accidentally (by children, for example). When Panel Lock
is set to On, none of the controls on the control panel operate
except POWER.
To lock the control panel:
1
Press the MENU button to highlight the Locks menu.
2
Press the (
3
Enter your four-digit PIN code, and then press the OK button.
4
Press the (
arrow) button to highlight Panel Lock.
5
Press the (
arrow) button to select On.
arrow) button to display the
When the control panel is locked and any button on the control
panel (except POWER) is pressed, the message “NOT
AVAILABLE” appears.
(Sample Illustration) Panel Lock screen
Using the TV’s features
Using the PC settings feature
97
To unlock the control panel, select Off in Step 5 above or press and
hold the VOLUME (–) button on the TV control panel for a few
seconds until the volume icon appears.
Using the PC settings feature
You can view an image from a PC on the TV screen. When a PC is
connected to the TV's PC IN terminal, you can use the PC Settings
feature to make adjustments to the image. If the edges of the picture
are cut off, readjust the Horizontal Position and Vertical Position. If
the picture is affected by interference, readjust the Clock Phase and
Sampling Clock.
To adjust the PC settings:
1
Repeatedly press the INPUT button to select PC Input mode,
see “Adjusting the picture” on page 76.
2
Press the MENU button to open the Setup menu.
3
Press the ( / arrow) buttons to select PC Settings, and then
press the OK button.
HDMI-CEC Setup
(Sample Image) PC Settings screen
NOTE
If a computer is not connected or there is no PC input signal, this
feature will be grayed out in the Setup menu.
4
Press the ( /
arrow) buttons to select an item.
5
Press the ( /
adjustments.
arrow) buttons to make the appropriate
(Sample Image) PC Settings - adjustments screen
98
Using the TV’s features
Using the PC settings feature
NOTE
The screen is disrupted momentarily while adjusting the PC settings.
This is not a sign of malfunction.
Mode:
Description:
Horizontal Position Moves the picture left/right. The adjustment range is within ±10 from
center.*
Vertical Position
Moves the picture up/down. The adjustment range is within ±10 from
center.*
Clock Phase
Helps to reduce noise and sharpen the picture. The adjustment range is
within ±16 from center.*
Sampling Clocks
Helps to reduce noise and minimize periodic vertical stripes on the
screen. The adjustment range is within ±10 from center.*
Reset
Highlight this item, and then press the OK button to get an optimum
adjustment automatically.
* The default settings and/or adjustment ranges may vary depending on the
input signal format.
Setting the PC Audio
You can output or mute sound from your computer when
connecting it to your TV, using the AUDIO IN terminal and PC
audio cable.
To set the PC Audio:
1
Press the MENU button to open the Sound menu.
2
Highlight Audio Setup, and then press the OK button.
3
Press the ( /
press the ( /
NOTE
arrow) buttons to select PC Audio, and then
arrow) buttons to select No or Yes.
❖
Yes: When viewing the PC input, the audio from the PC
Audio input can be heard.
❖
No: When viewing the PC input, there will be no audio.
Because the PC and HDMI 1 inputs share the same set of analog
audio inputs, the PC Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to “No” the HDMI 1 Audio
setting changes to “Auto” If PC Audio is set to “Yes” the HDMI 1
Audio setting is set to “Digital” and is grayed out in the menu.
Using the TV’s features
Using the Media Player
99
Using the Media Player
Using Media Player with a USB device
You can enjoy photos or music contents stored on a USB storage
device.
Photo Viewer specifications:
❖
Data type: JPEG EXIF ver 2.1
❖
File format: JPEG
❖
Maximum photo size: 6 MB
❖
Maximum number of files: 500/folder
❖
Maximum photo resolution: 4096 x 4096 pixels
❖
Best photo resolution:
1920 x 1080 pixels
Music Player specifications:
❖
File format: MP3
❖
Sampling frequency: 16 kHz, 22.05 kHz, 24 kHz,
❖
32 kHz, 44.1 kHz, 48 kHz
❖
Bit rate: from 8 to 320 kbps
❖
Maximum number of files: 500/folder
Supported file system: FAT16 and FAT32
100
Using the TV’s features
Using the Media Player
NOTE
❖ Gently insert the USB device into the port and do not remove
while viewing Media Player.
❖ USB device: USB Mass Storage Class device (MSC)
❖ Connectivity is not guaranteed for all devices.
❖ Connect the USB device to the TV directly.
❖ Do not use a USB Hub.
❖ You must obtain any required permission from copyright owners
to use copyright content. Toshiba cannot and does not grant
such permission.
❖ Depending on the file size and amount in your USB storage
device, it may take some time for loading to view. A message will
display on-screen when loading files from the USB storage
device.
❖ Only limited types of U3 USB device are supported. Therefore, it
is suggested not to use U3 USB for playing Media Player.
❖ Non-supported characters will be replaced with a square.
Auto Start function
When Auto Start is enabled, you will be asked if you want to start
the Media Player when a USB device is inserted. If Auto Start is
disabled, you must manually start the Media Player from the menu.
To change the Auto Start setting:
1
Press the MENU button to open the Setup menu.
2
Press the (
3
Press the ( /
arrow) buttons to highlight Auto Start.
4
Press the ( /
arrow) buttons to select On/Off.
arrow) button, and then press the OK button.
To open the Media Player
Auto Start:
1
NOTE
Gently insert a supported USB storage device to the USB port
on the rear side of the TV. A prompt will appear.
If you repeatedly insert and remove the USB connector, the prompt
may not appear.
Using the TV’s features
Using the Media Player
2
Press the ( /
OK button.
101
arrow) buttons to select Yes, and then press the
The Media Player menu will appear. When you select No,
nothing happens.
(Sample Image) Media Player - open screen
NOTE
❖ The prompt will disappear after about 10 sec.
❖ If Auto Start is set to off, you can start the Media Player
manually.
Manual Start:
1
Press the MENU button to open the Setup menu.
2
Press the ( arrow) button to select Media Player, and then
press the OK button.
3
Press the ( / arrow) buttons to highlight Photo or Music,
and then press the OK button.
(Sample Image) Media Play screen
NOTE
❖ The viewer will also open even if there are no photo or music
files.
❖ While the Media Player is active, the main menus cannot be
displayed.
Viewing photo files
There are three types of view modes.
Multi View:
102
Using the TV’s features
Using the Media Player
This view allows you to search for photos in a grid format. These
pictures are displayed using thumbnail data in each image file.
(Sample Image) Media Play - photos screen
1
Press the ( / / / arrow) buttons to move the highlight in
one window. If all of the photos will not fit in one screen, when
pressing the ( arrow) button at the top left thumbnail, the
screen will move to the previous page. Conversely, when
pressing the ( arrow) button at the bottom right thumbnail,
the screen will move to the next page. CH Up/Ch down
buttons can be used to page up/down the photo list when there
are more photos than will fit onto one screen.
2
When you select a folder, press the OK button to move to the
next layer, or press the RETURN button to return to the
previous layer.
3
Press the OK button to view the selected photo in Single View
mode.
Single view
In this view mode, only files located in the selected directory shall
be displayed. This view allows you to change the photo content
manually. When moving from Multi View to the Single View, the
currently selected photo shall be displayed.
1
Press the ( arrow) button to view the next photo. Press the
( arrow) button to view the previous photo.
2
Press the ( arrow) button to rotate the image 90°
counterclockwise. Press the ( arrow) button to rotate the
image 90° clockwise.
Using the TV’s features
Using the Media Player
103
Slide show
This view allows you to watch a slide show of the photos. In this
mode, only files located in the selected directory will be played.
1
To start slide show, press the OK button to select Single View
mode.
2
Press the ( /
photo.
arrow) buttons to view the previous or next
To set Interval Time and Repeat settings:
1
Press the MENU button to open the Quick Menu.
2
Press the ( /
or Repeat.
3
Press the ( / arrow) buttons to adjust the setting, and then
press the RETURN button.
NOTE
arrow) buttons to select either Interval Time
Zoom and Picture size functions are disable.
To close the Photo Viewer, press the EXIT button. The television
will return to the last viewed channel or external input.
Playing music files
You can listen to music from a list of available files.
1
Press the MENU button to open the Setup menu.
2
Highlight Media Player, and then press the OK button.
3
Press the (
4
Press the ( / arrow) buttons to select a file or folder. The
CH Up/CH Down buttons can be used to page up/down the
music list when there are more files than will fit onto one
screen.
5
When you select a folder, press the OK button to move to the
next layer. Press the RETURN button to move back to the
previous layer.
6
With the desired file selected, press the OK or PLAY button to
begin playback.
7
Press the STOP button to stop playback
arrow) button to select Music.
104
Using the TV’s features
Using the Media Player
NOTE
❖ If playback finishes before the STOP button is pressed, the next
file automatically starts to play from the beginning.
❖ Depending on the file size, it may take some time for playback to
begin.
To pause playback:
❖
Press the PAUSE button to pause playback.
❖
To resume normal playback, press the PLAY or PAUSE
button.
❖
To locate a specific file, press the SKIP Reverse or SKIP
Forward button repeatedly.
❖
To adjust volume, press VOLUME (+ –) buttons.
NOTE
During playback, you can adjust the SOUND menu functions from
the Quick Menu.
To set the repeat mode:
1
Press the MENU button to open the Quick Menu.
2
Highlight Repeat, and press the ( /
Off, All or 1.
3
Press the CH RTN button to close the Music Player, and then
press the EXIT button.
arrow) buttons to select
Viewing photo files and playing music files at the same time
While viewing photo files, this allows you to listen to music from a
list of available files.
1
While viewing photos in Single View or Slide Show mode,
press the MENU button to open the Quick Menu.
2
Highlight Background Music, and then press the OK button.
The music list appears.
3
Select a music file and press the OK button to start playback.
4
Press the RETURN button twice to return to photo view mode.
The music is now playing in the background.
Using the TV’s features
Using the Media Player
105
Contents
Description
Description
Photo
Photo list (Multi View)
See page 137
Sorting
To sort the folders and files:
1 Press the MENU button to open the Quick Menu
from Multi View mode.
2 Press the ( /
arrow) buttons to select Sort.
3 Press the ( / arrow) buttons to select Title,
New, or Old to set the sorting rule.
Title-File sorting rules:
1 Unicode priority
2 (0, 1-9), capital alphabet
(A, B-Z), small alphabet
(a, b-z), Chinese
3 Increasing order
New-From new to old (according to the date and
time the picture was taken).
Old-From old to new (according to the date and time
the picture was taken).
Single View mode
Slide Show mode
Skip to previous/next photo
Slide Show Repeat play
Slide Show Interval Time selection
106
Using the TV’s features
Setting the sleep timer
Contents
Description
Description
Music
Music list (Multi View)
See page 136
Sorting
To sort the folders and files:
1 Press the MENU button to open the Quick Menu.
2 Press the ( /
arrow) buttons to select Sort.
3 Press the ( / arrow) buttons to select Title,
New, or Old to set the sorting rule.
Playback
Pause
Stop
Skip
Repeat play
Sound Settings
(Adjusting the audio quality)
NOTE
During playback, you can adjust the SOUND menu functions from
the Quick Menu.
Setting the sleep timer
You can set the sleep timer to turn off the TV after a set length of
time (maximum of 12 hours).
To set the sleep timer using the remote control:
1
Press the SLEEP button on the remote control to set the length
of time until the TV turns off.
2
Repeatedly press the SLEEP button to increase the time in
10-minute increments, or press the ( / arrow) buttons to
increase or decrease the time in 10-minute increments,
(maximum of 12 hours).
To set the sleep timer using the on-screen menus:
1
Press the MENU button to open the Setup menu.
2
Highlight Sleep Timer.
Using the TV’s features
Automatic Power Down
3
NOTE
107
Press the Number buttons to enter the length of time
(maximum of 12 hours) and then press the OK button.
Or press the ( / arrow) buttons to increase or decrease in
10-minute increments, (maximum of 12 hours).
If a power failure occurs, the sleep timer setting may be cleared.
To display the time remaining until the TV turns off, press the
SLEEP button.
NOTE
A message displays on-screen when one minute is remaining on the
sleep timer.
To cancel the sleep timer, Repeatedly press the SLEEP button until
it is set to 0 minutes.
Automatic Power Down
The TV can be configured to automatically turn itself off after 4
hours if you do not operate the TV either from the remote control or
the TV control panel.
1
From the Preferences menu, highlight Energy Saving
Settings, and then press the OK button.
2
Press the ( /
Down.
3
Press the ( / arrow) buttons to select On/Off, and then press
the EXIT button.
NOTE
arrow) buttons to select Automatic Power
When the following features are set, the feature that is set for the
nearest time will function.
❖ Automatic Power Down
❖ Sleep Timer
❖ Wallpaper/Auto Power Off
❖ Auto shutdown after 1 hour of inactivity (after powering on by On
Timer)
❖ No signal auto power off (after 14 minutes of no signal)
108
Using the TV’s features
No Signal Power Down
No Signal Power Down
The TV will automatically turn itself off after 15 minutes when no
signal is detected.
❖
You can change the setting to Off for the following functions:
❖
Low signal strength of an analog channel (no signal detection)
❖
Only Audio L/R is connected to external input to listen to
music through the TV speakers.
1
From the Preferences menu, highlight Energy Saving
Settings, and then press the OK button.
2
Press the ( / arrow) buttons to select No Signal Power
Down, and then press the OK button.
3
Press the ( / arrow) buttons to highlight the item you wish
to change, and then press the ( / arrow) buttons to select
On/Off.
NOTE
❖ Default setting for each input is On.
❖ A warning message appears approximately 1 minute before the
TV turns Off.
Using HDMI®-CEC
This is a new feature that uses CEC technology and allows you to
control Toshiba HDMI®-CEC compatible devices from the TV
remote control via an HDMI® connection.
When the Enable HDMI®-CEC in the HDMI®-CEC Setup menu is
set to On, the following HDMI®-CEC functions are enabled.
HDMI®-CEC playback device (DVD player, etc.) control
With your TV’s remote control, or using the HDMI®-CEC Player
Control menu, you can control the connected HDMI®-CEC
playback device you are watching.
Available remote control key functions:
Button:
PLAY
STOP
PAUSE
SKIP Forward
Description:
Begin playback
Stop playback
Pause the picture during play or record mode
Skip Forward
Using the TV’s features
Using HDMI®-CEC
Button:
SKIP Reverse
FF
REV
/ / /
OK
CANCEL
NOTE
109
Description:
Skip backward
Fast forward
Rewind/reverse
Navigates menu options
Enters menu options
Return to the previous menu
These functions depend on the devices connected.
HDMI®-CEC Player Control menu functions:
1
Press the MENU button, and then open the Preferences menu.
2
Highlight HDMI-CEC Player Control, and then press the
OK button.
(Sample Image) HDMI®-CEC Player Control screen
3
Item:
Power
Root Menu
Contents Menu
Setup Menu
Top Menu
Menu
Press the ( / arrow) buttons to select the item you wish to
control, and then press the OK button.
Description:
Turns the selected device On/Off
Accesses the top menu of the selected device
Accesses the contents list when you press the OK button. At this time,
the HDMI®-CEC Player Control menu disappears.
Accesses the Setup menu of a DVD player
Accesses the top menu of a DVD
Accesses the menu of a DVD
110
Using the TV’s features
Using HDMI®-CEC
NOTE
These functions depend on the devices that are connected.
The HDMI®-CEC Player Control item will be grayed out in the
following conditions:
❖ A non-HDMI® input is currently selected.
❖ The Enable HDMI®-CEC item is set to Off.
❖ The connected CEC device is not a playback or recording device.
HDMI®-CEC input source selection
If a HDMI®-CEC device with HDMI® switching capability
(e.g. Audio Receiver) is connected to the HDMI® input, you can
select another HDMI®-CEC device that is connected to the master
HDMI® device using the TV’s INPUT button, see “Selecting the
video input source” on page 59.
VOLUME and MUTE controls of Audio Receiver
With your TV’s remote control, you can adjust or mute the sound
volume of the Audio Receiver.
❖
VOL (+ –) buttons adjust the volume level.
❖
MUTE button turns off the sound.
To use this function:
❖
Set Speaker Preference to Audio Receiver in the
HDMI-CEC Setup menu.
❖
Confirm that a connected HDMI®-CEC device (such as DVD
player, etc.) is selected for the Audio Receiver input source.
NOTE
These functions depend on the device connected.
Using the TV’s features
Using HDMI®-CEC
111
Other HDMI®-CEC functions
When the Enable HDMI-CEC and each item in the
HDMI-CEC Setup menu are set to On, the following functions
will be enabled.
Item:
TV Auto Input
Switch
TV Auto Power
Device Auto
Standby
Speaker
Preference
Description:
If a connected HDMI® device starts playing video or audio, the TV will
automatically switch to the appropriate HDMI® input.
If a HDMI®-CEC device is turned on, the TV turns on automatically.
If the TV is turned off the TV will send a message to turn off all of the
HDMI®-CEC devices connected to the TV.
From this item, you can set your audio output preference to the TV speakers
or the audio receiver speakers. When this item is set to Audio Receiver, the
TV remote can be used to adjust or mute the volume of the audio. This item
will be grayed out unless a HDMI®-CEC compatible audio receiver is
connected.
NOTE
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver’s speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
To set the HDMI®-CEC Setup:
1
From the Setup menu, highlight HDMI-CEC Setup and press
the OK button.
2
Press the ( / arrow) buttons to highlight Enable
HDMI-CEC.
3
Press the ( /
NOTE
4
arrow) buttons to select On.
If you select Enable HDMI®-CEC Off, the other items will be grayed
out.
Press the ( / arrow) buttons to highlight the HDMI-CEC
Setup item you wish to use, and press then press the ( /
arrow) buttons to select On or the desired mode.
❖
TV Auto Input Switch: On/Off
❖
TV Auto Power: On/Off
❖
Device Auto Standby: On/Off
❖
Speaker Preference: TV Speakers/Audio Receiver
112
Using the TV’s features
Displaying TV status information
5
To save the new settings, highlight Done and press the OK
button. To revert to the factory defaults, highlight Reset and
press the OK button.
Displaying TV status information
To display TV status information:
❖
Press the INFO button on the remote control.
The following information will be displayed (if applicable):
❖
Current input (ANT/CABLE, Video, etc.)
❖
If ANT/CABLE is the current input, either “CABLE” (for
cable TV) or “ANT” (for over-the-air broadcasts).
❖
Channel number (if in ANT/CABLE mode)
❖
Channel label, if applicable
❖
Digital signal strength indicator (bar graph in lower right
corner of box; for ATSC signals only)
❖
Stereo, Mono, or SAP audio status (when in HDMI® input
mode, PCM)
❖
Video resolution
❖
Aspect ratio of incoming video signal (4:3 or 16:9)
❖
V-Chip rating status
❖
GameTimer (if set)
To close the screen (except ANT/CABLE input), press the INFO
button again.
The following additional information will display for ANT/CABLE
input, if applicable:
❖
Title
❖
Duration
❖
Detailed description
To display the next program’s information for digital channels,
press the INFO button again. Pressing the INFO button a third time
will remove the entire banner.
(Sample Illustration) Banner
Using the TV’s features
Understanding the auto power off feature
NOTE
113
The location of the banner can be moved to the top or bottom of the
screen by pressing or while the INFO display is on-screen.
Understanding the auto power off feature
The TV will automatically turn itself off after approximately 15
minutes if it is tuned to a vacant channel or a station that completes
its broadcast for the day.
NOTE
❖ If you want to set this feature to Off, see “No Signal Power Down”
on page 108.
❖ If it is possible that you will be away from the TV for an extended
period of time, you should unplug the power cord.
Understanding the last mode memory feature
If the power is cut off while you are viewing the TV, the Last Mode
Memory feature automatically turns on the TV when the power is
resupplied.
NOTE
If it’s possible, and you will be away from the TV for an extended
period of time you should unplug the power cord.
Chapter 7
Using the TV’s Advanced
Features
Using the advanced picture settings
Dynamic Contrast
Dynamic Contrast detects changes in picture quality that affect the
appearance of your contrast settings and then automatically adjusts
the video.
To select Dynamic Contrast preference:
1
From the Picture menu, highlight Picture Settings and press
the OK button.
(Sample Image) Dynamic Contrast screen
114
2
Highlight Advanced Picture Settings, and then press the OK
button.
3
Press the ( /
arrow) buttons to select Dynamic Contrast.
Using the TV’s Advanced Features
Using the advanced picture settings
4
Press the ( /
Off.
115
arrow) buttons to select High, Middle, Low or
Static Gamma
The static gamma feature lets you adjust the levels of black in the
picture.
To adjust the static gamma settings:
1
Press the MENU button to open the Picture menu.
2
Highlight Picture Settings, and then press the OK button.
3
Highlight Advanced Picture Settings, and then press the OK
button.
❖
In the Static Gamma field, press the ( / arrow) buttons
to adjust the Static Gamma.)The adjustment range is
within ±5 from center).
❖
If the setting is decreased, the detail of black colors is
decreased.
❖
If the setting is increased, the detail of black colors is
increased.
4
To save the new settings, highlight Done, and then press the
OK button.
5
To revert the factory defaults, highlight Reset, and then press
the OK button.
NOTE
Note: If you select one of the factory-set picture modes (Dynamic,
Standard, Movie or PC) and then change the Static Gamma setting,
the picture mode automatically changes to Preference.
Color temperature
You can change the quality of the picture by selecting from three
preset Color Temperatures (Cool, Medium, and Warm), as
described below.
Mode:
Cool
Medium
Warm
Picture Quality:
blueish
neutral
reddish
1
Press the MENU button to open the Picture menu.
116
Using the TV’s Advanced Features
Using the advanced picture settings
2
Highlight Picture Settings, and then press the OK button.
3
Highlight Advanced Picture Settings, and then press the OK
button.
4
Highlight Color Temperature, and then press the OK button.
5
In the Color Temperature field, press the ( / arrow)
buttons to select the mode you prefer (Cool, Medium, or
Warm).
6
Press the ( / arrow) buttons to select either B Drive or G
Drive, and then press the ( / arrow) buttons to adjust the
settings:
NOTE
❖
B Drive: press the (
blueish.
arrow) button to make the picture
❖
G Drive: press the (
greenish.
arrow) button to make the picture
The B Drive and G Drive settings are connected to the Color
Temperature settings and will change based on which setting is
selected in step 5 above.
7
To save your new settings, highlight Done, and then press the
OK button.
8
To revert to your original settings, highlight Reset, and then
press the OK button.
NOTE
If you select one of the factory set picture modes (Dynamic,
Standard, Movie, or PC) and then change the Color Temperature
mode, the picture mode automatically changes to Preference.
CableClear® digital Noise Reduction
The CableClear® digital Noise Reduction feature allows you to
reduce visible interference in your TV picture. This may be useful
when receiving a broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1
Press the MENU button to open the Picture menu.
2
Highlight Noise Reduction, and then press the OK button.
3
In the CableClear field, select your desired setting.
Using the TV’s Advanced Features
Using the advanced picture settings
NOTE
117
❖ If the current input is ANT/CABLE or VIDEO, the menu will
display the text “CableClear”. The available selections are Off,
Low, Middle, and High.
❖ If the current input is ColorStream® HD, HDMI 1 or HDMI 2, the
menu will display the text “DNR”. The available selections are
Off, Low, Middle, and High. Low, Middle, and High will reduce
the noise in varying degrees, from lowest to highest,
respectively.
4
To save your new settings, highlight Done, and then press the
OK button.
5
To revert to your original settings, highlight Reset, and then
press the OK button.
MPEG Noise Reduction
The MPEG Noise Reduction feature allows you to reduce visible
interference caused by MPEG compression. Choices for MPEG
Noise Reduction are Off, Low, Middle, and High. Off is
automatically selected when this feature is disabled (“grayed out”).
To select the MPEG Noise Reduction level:
1
Press the MENU button to open the Picture menu.
2
Highlight Noise Reduction, and then press the OK button.
3
Press the ( / arrow) buttons to highlight the MPEG Noise
Reduction field G Drive, and then press the ( / arrow)
buttons to select either Off, Low, Middle, or High.
4
To save your new settings, highlight Done, and then press the
OK button.
5
To revert to your original settings, highlight Reset, and then
press the OK button.
Using the Game Mode feature
You can use the Game Mode feature for shorter frame delays when
playing a video game requiring split-second timing between the
on-screen display and input from the controller (such as music
creation and high-action games).
This feature is more effective for 480i and 1080i input signals.
118
Using the TV’s Advanced Features
Using the advanced picture settings
NOTE
To use the Game Mode feature, the current video input must be
Video, ColorStream® HD, HDMI 1 or HDMI 2. The Game Mode
cannot be turned on when any other video input, other than the
above mentioned is selected.
To turn on Game Mode:
1
Press the MENU button to open the Picture menu.
2
Press the ( /
3
Press the OK button to toggle Game Mode On/Off.
arrow) buttons to select Game Mode.
To turn off Game Mode, toggle to Off in step 3 above, change the
video input, or turn the TV off and then on again.
NOTE
You can change the video input by pressing INPUT on the remote
control.
Chapter 8
Basic Disc Playback
Disc playback
This section shows you the basics on how to play a disc.
Basic playback (DVD/VCD/CD)
1
Press the POWER button on the TV control panel or on the
remote control.
The Power LED on the front of the LED TV/DVD combination
changes to green. It may take approximately 10 seconds for a
picture to appear on-screen. When using an amplifier, switch
on the amplifier.
119
120
Basic Disc Playback
Disc playback
2
Press the TV/DVD button on the remote control to switch to
DVD mode.
The DVD start-up screen appears.
(Sample Image) DVD start-up screen
3
NOTE
Hold the disc by its edges and load it in the disc slot with the
label side facing forward. The prompt “Close” changes to
“Loading” and then playback begins.
DO NOT touch the surface of the disc. This may leave a smudge that
can cause playback errors.
If the disc has its own menu, it will be displayed on-screen.
Press the ( / / / arrow) buttons on the remote control to
navigate the disc menu, then press the OK button to implement
the selected menu option.
To adjust playback volume, press the VOL (+ –) buttons.
To temporarily suspend disc playback (still mode), press the
PAUSE button.
To continue playback from still mode, press the PLAY button.
To stop playback, press the STOP button.
Playback resume function:
Your LED TV/DVD combination supports playback resume
function.
If you stopped the disc playback before it is completed, the LED
TV/DVD combination records the stop point.
Press the PLAY button to resume playback on the stop point. If you
press the STOP button twice in quick succession or unload the disc,
the LED TV/DVD combination will clear the stop point.
Basic Disc Playback
Disc playback
121
Higher quality picture:
High resolution pictures on some discs may occasionally cause
noise on the picture display. If this is the case, reduce the
Sharpness setting under the Picture Settings menu.
NOTE
❖ Keep your fingers well clear of the disc slot when a disc is
loading or unloading. Failure to do so may cause serious
personal injury.
❖ Do not move the TV during playback. Doing so may damage the
disc.
❖ When a disc is inserted when the TV is not in DVD mode, the TV
will automatically switch to DVD mode.
This indicates the kind of disc that can employ the function
described under that heading.
❖
DVD: You can use this function with DVDs.
❖
VCD: You can use this function with Video CDs.
❖
CD: You can use this function with Audio CDs and CD-R/RW
discs.
Removing a disc
1
Press the EJECT button on the TV control panel or on the
remote control.
2
Wait for the disc to be ejected and then remove the disc from
the slot.
Disc playback reminders
❖
If the LED TV/DVD combination does not operate properly,
static electricity build-up may be the cause. Turn off the LED
TV/DVD combination, then disconnect the power cord from
the AC outlet. Reconnect the power cord, then press the
POWER button to turn on the LED TV/DVD combination
again.
❖
If an incompatible disc is loaded, one of the following error
messages appears on-screen: “Incorrect Disc,” “Wrong
Region,” or “Please Enter Pws.” If this is the case, check your
disc again.
❖
In some instances the LED TV/DVD combination may take a
few minutes to start disc playback.
122
Basic Disc Playback
Playback navigation
❖
When you load a disc with the playback side facing backward,
the message, “Loading” appears on the screen. It will be
replaced by the message, “Incorrect Disc.” Eject the disc and
load it again making sure the playback side is now facing
forward.
❖
The playback resume function may not work on some discs.
❖
Some DVDs may have fixed playback operations designed by
the DVD manufacturer. Your LED TV/DVD combination
follows this fixed playback design. In such cases, some
playback features may not be available. You may refer to the
instructions accompanying the DVD.
❖
Do not put any objects other than compatible discs in the disc
slot. Doing so may cause damage to the LED TV/DVD
combination.
❖
There may be a few seconds between the action of pressing a
button and the function it activates.
❖
Do not use 8cm DVD or CD Discs. These formats are not
supported.
Playback navigation
Playing in fast reverse or fast forward direction (DVD/VCD/CD)
Press the REV button or the FF button during playback.
❖
REV: Fast reverse playback
❖
FF: Fast forward playback
Each time you press the REV button or the FF button, the playback
speed changes.
To resume normal playback, press the PLAY button.
NOTE
❖ The sound is muted during reverse and forward scan.
❖ The playback speed may differ depending on the disc.
❖ You can use fast reverse/fast forward playback for MP3 and
WMA discs.
Basic Disc Playback
Playback navigation
123
Playing frame by frame (DVD/VCD)
Press the PAUSE button during playback. Each time you press the
PAUSE button, the picture advances one frame.
To resume normal playback, press the PLAY button.
NOTE
The sound is muted during frame by frame playback.
Playing in slow motion (DVD/VCD)
Press the SLOW button during playback. Each time you press the
SLOW button, the slow motion speed changes.
To resume normal playback, press the PLAY button.
NOTE
The sound is muted during slow motion playback.
Locating a chapter or track (DVD/VCD/CD)
Press the SKIP Forward button or the SKIP Reverse button
repeatedly to locate the next or previous chapter or track you want
to play.
❖
SKIP Forward: To locate succeeding chapters or tracks.
Playback starts from the beginning of the selected chapter or
track.
❖
SKIP Reverse: Playback starts from the beginning of the
current chapter or track.
When you press the SKIP Reverse button twice in quick
succession, or one time within 3 seconds from the beginning of the
current chapter or track, playback starts from the beginning of the
preceding chapter or track.
Chapter 9
Advanced Disc Playback
Zoom function/Scene navigation
You can change the viewing scale of a picture by using the Zoom
function. Once the image has been rescaled, use the ( / / /
arrow) buttons to pan the image.
Scene navigation options differ depending on the kind of disc.
DVDs use the title, chapter or record time to locate the start point
for playback. Audio CDs and Video CDs use the record time or
track number.
Using Zoom (DVD/VCD)
1
Press the ZOOM button during playback. The view will zoom
into the center of the image. Each time you press the ZOOM
button, the scale increases by the following values: x2, x3, x4.
(Sample Image) Disc zoom
124
2
Press the ( / / / arrow) buttons to pan the scene and view
different sections of the picture.
3
To return to normal view, in Zoom mode, press the ZOOM
button repeatedly until picture size returns to normal viewing.
Advanced Disc Playback
Zoom function/Scene navigation
NOTE
125
❖ You can use the Pause, Slow and Search playback functions in
Zoom mode.
❖ Zoom function may not apply to some discs.
Locating a specific scene
1
Press the JUMP button during playback, still or stop mode.
(Sample Image) Disc Jump - Title
2
Press the ( /
arrow) buttons to select a navigation option.
(Sample Image) Disc Jump - Chapter
3
Use the Channel Number buttons (0-9) to enter a value for the
chapter number of the DVD option you selected.
Number entries must be entered in a two digit format, such as
08 or 09 instead of 8 or 9, while using this feature.
(Sample Image) Disc Jump - Chapter 12
If you input a wrong number, wait approximately 8 seconds for the
screen to disappear and then press the JUMP button again. Refer to
the disc package to check the correct number.
4
The DVD will change to the selected chapter after the chapter
numbers are entered. For VCD, you must press the PLAY
button or the OK button to start playback.
For Audio CDs and Video CDs, you can locate a scene by track
number or record time.
126
Advanced Disc Playback
Scene bookmark
VCD mode:
(Sample Image) Disc Jump - VCD mode
CD mode:
(Sample Image) Disc Jump - CD mode
NOTE
❖ When you use title navigation, playback starts from the first
chapter of the selected title.
❖ For PBC-enabled VCDs, turn off the PBC function first before
using the Jump function.
❖ Scene navigation may not apply to some discs.
Scene bookmark
Scene bookmarks refer to specific points in the playback range that
have been marked for later access. You can create up to twelve
markers per disc.
NOTE
The saved scene bookmarks are only accessible during the current
session. Once you eject the disc or turn off the LED TV/DVD
combination, all bookmarks will be cleared.
Advanced Disc Playback
Scene bookmark
127
Bookmarking a scene (DVD/VCD)
1
During playback, press the MARKER button at the scene you
would like to place the bookmark.
(Sample Image) Disc scene bookmarking
2
Press the ( / arrow) buttons to select a blank marker, and
then press the PLAY button. Repeat these steps to save twelve
more bookmarks.
(Sample Image) Disc scene bookmarking
3
NOTE
Press the MARKER button to exit and close the bookmark
window. Select Cancel to cancel the bookmark and exit the
screen.
❖ In some cases, subtitles for the marked scene may not display.
❖ Bookmarking a scene may not apply to some discs.
128
Advanced Disc Playback
Scene bookmark
Viewing a scene bookmark (DVD/VCD)
1
Press the MARKER button to open the bookmark window.
2
Press the ( /
arrow) buttons to select the saved marker.
(Sample Image) Disc scene bookmarking
3
Press the PLAY button to start playback on the scene saved in
the selected bookmark.
To delete a scene bookmark, perform steps 1 and 2 above, and then
press the EXIT button.
Repeat playback/A-B repeat
You can choose to repeat DVD playback by title or chapter. For
Audio CDs and Video CDs, you can repeat a single track or the
entire disc.
The A-B repeat function lets you repeat a specific section between
two set points. This section will be played repeatedly until you turn
off the A-B repeat mode.
The repeat playback mode is not applicable to PBC-enabled Video
CDs.
Enabling repeat playback (DVD/VCD)
❖
DVD:
❖
Press the PLAY MODE button repeatedly to select a
repeat mode. It can either be by Chapter, Title, or All.
Advanced Disc Playback
Scene bookmark
129
The LED TV/DVD combination automatically starts
repeat playback after finishing the current title or chapter.
(Sample Image) Disc enabling repeat playback
VCD:
❖
Press the PLAY MODE button repeatedly to select a
repeat mode. The modes are listed by Track, All, or Off.
(Sample Image) Disc enabling repeat playback
NOTE
If you set the repeat mode during stop mode, press the PLAY button
to start Repeat playback.
To resume normal playback, select Off in the step above.
NOTE
The Repeat playback function may not apply to some discs.
Enabling A-B repeat mode (DVD/VCD/CD)
1
During playback, press the REPEAT A-B button at the point
where you would like the playback loop to begin. This sets
your “A” point.
(Sample Image) Disc A-B repeat mode
2
When the playback reaches the point where you would like the
playback loop to stop, press the REPEAT A-B button again.
This sets your “B” point.
(Sample Image) Disc A-B repeat mode
The section between points A and B will be played repeatedly in a
loop until you turn off the Repeat A-B mode.
130
Advanced Disc Playback
Scene angle/Title selection/DVD menu
To resume normal playback, press the REPEAT A-B button until
"A-B repeat" disappears on the screen.
NOTE
❖ In some cases, subtitles for the repeated scene may not display.
❖ The A-B repeat mode may not apply to some DVD scenes.
❖ The A-B repeat mode is not applicable to interactive DVDs and
JPEG CDs.
Scene angle/Title selection/DVD menu
Changing the scene angle (DVD)
1
Press the ANGLE button during playback.
2
Press the ANGLE button repeatedly until the preferred scene
angle is displayed.
NOTE
Depending on the DVD, you may not be able to change the scene
angle even if multi-angle data are recorded on the disc.
Selecting a DVD title (DVD)
Some DVDs contain two or more titles. If this is the case, you can
select a particular title for playback.
1
Press the TOPMENU button during playback to display the
title menu.
2
Press the ( / / /
title.
3
Press the PLAY button or the OK button to start playback.
NOTE
arrow) buttons to select the preferred
❖ Title selection may not apply to some DVDs.
❖ The title menu may simply be referred to a “menu” or “title” in
the instructions supplied with the DVD.
DVD menu (DVD)
Some DVDs have an encoded menu that allows users to select a
specific disc content, enable a particular DVD feature (e.g. subtitle
or sound track language), or choose a particular title (for multi-title
DVDs).
1
Press the DVD MENU button during playback.
Advanced Disc Playback
Sound track language/Audio channel/Subtitle
131
2
Press the ( / / / arrow) buttons to select a DVD menu
item, and then press the OK or PLAY button to access it. Use
the same buttons to enable an option for the selected item.
Repeat this step to configure other menu options.
3
Press the DVD MENU button again to resume playback on the
scene that was playing when you pressed the DVD MENU
button.
NOTE
Depending on the DVD, you may not be able to resume playback
from the same scene that was playing when you pressed the DVD
MENU button.
Sound track language/Audio channel/Subtitle
Selecting a sound track language (DVD)
You can select the sound track language when you play a
multilingual DVD.
During playback, press the AUDIO button repeatedly until the
preferred language track is selected.
Selecting the audio channel (VCD)
During playback, press the AUDIO button repeatedly until the
preferred audio channel is heard. The available options are Stereo,
Left, Right, and Mix.
NOTE
❖ If the preferred language option is not heard after selecting it for
several times, that language is not recorded on the disc.
❖ The sound track language selected is only applicable for the
current session. When you stop playback and try to play the disc
again, the default language track will be used.
Viewing subtitles (DVD)
When playing back a disc recorded with subtitles, you can select
the subtitle language or turn the subtitle off.
To view subtitles:
Press the SUBTITLE button repeatedly during playback until the
preferred language is selected.
The Subtitle prompt disappears after a few seconds.
132
Advanced Disc Playback
Playback information/VCD playback control
To disable subtitles:
Press the SUBTITLE button until Off appears.
NOTE
❖ Not all DVDs have encoded subtitles.
❖ The subtitle selection may revert to the default language when
you stop playback and try to play the DVD again.
❖ In some cases, the selected subtitle may not display
immediately.
Playback information/VCD playback control
Viewing the playback info (DVD/VCD)
Press the DISPLAY button during playback.
DVD mode:
(Sample Image) Viewing the playback info - DVD mode
(Sample Image) Viewing the playback info - DVD mode
VCD mode:
(Sample Image) Viewing the playback info - VCD mode
To close the information display, press the DISPLAY button until
"Display Off" appears.
NOTE
Depending on the disc, this operation may not be available.
Enabling the Playback Control (PBC) function (VCD)
1
In the stop mode, press the DVD MENU button to select the
PBC ON/OFF.
Advanced Disc Playback
MP3, WMA, JPEG, and Audio CD operation
133
(Sample Image) Enabling the PBC function
When enabled, PBC allows interactive Video CD playback using
the remote control.
MP3, WMA, JPEG, and Audio CD operation
This LED TV/DVD combination can play MP3, WMA, and JPEG
files recorded on a DVD/CD-R or DVD/CD-RW disc. To create the
MP3/WMA/JPEG disc, you need a Windows PC with a
DVD/CD-RW drive and file encoding software. You must use a
Windows® computer to create the MP3/WMA/JPEG disc.
This LED TV/DVD combination requires discs/recordings that
meet certain technical standards in order to achieve optimal
playback quality. There are many different types of recordable disc
formats (including CD-R discs containing MP3 or WMA files). Not
all recordable discs will produce optimal playback quality. The
technical criteria set forth in this User’s Guide are meant only as a
guide. Use of DVD/CD-RW discs for recording MP3 files is not
recommended.
You must obtain any required permission from copyright owners to
download or use copyrighted content. Toshiba can not and does not
grant such permission.
MP3/WMA/JPEG/Audio CD information
MP3/WMA/JPEG CD playback reminders
❖
Make sure the file name of the MP3, WMA, and JPEG files in
the CD includes the 3-character file extension (“mp3”, “wma”,
“jpg”) to make it compliant with the ISO 9660 standard.
❖
This LED TV/DVD combination can read 2000 files per disc.
If a disc has more than 2000 files, it reads the first 2000 files,
while the remaining files will be omitted.
❖
To play the files in sequence based on the recorded order:
❖
Use an encoding software that records data alphabetically
or numerically.
❖
Include a two- or three-digit number prefix on the file
name (ex. “01” “02” or “001” “002”).
134
Advanced Disc Playback
MP3, WMA, JPEG, and Audio CD operation
❖
Refrain from making too many sub-folders.
❖
It may take more than one minute for this LED TV/DVD
combination to read MP3, WMA, and JPEG files depending on
the disc structure.
❖
Audio files recorded using the Joliet Recording Specification
can be played back in this LED TV/DVD combination. The file
name is displayed (up to 20 characters). Longer file names will
be condensed.
❖
Music recorded based on the Joliet Recording Specification
can be played back, the file name is displayed (within 20
letters) on the screen. Long file names will be condensed.
❖
This LED TV/DVD combination does not support data disc
burned using the Apple Mac OS (Hierarchical File System,
HFS format).
❖
MP3/WMA/JPEG CDs cannot be used for recording purpose.
File name display reminders
❖
The maximum number of characters for file name display is
20.
❖
Only the following characters will be displayed: A through Z
(both upper and lower case), 0 through 9, and the underscore
symbol (_).
❖
Non-supported characters will be replaced with a hyphen.
MP3/WMA/JPEG CD limitations
❖
Depending on the recording conditions, some
MP3/WMA/JPEG CDs cannot be played back in your LED
TV/DVD combination.
❖
Only MP3, WMA, and JPEG files recorded in the CD-R/RW
disc will be played. Other files will not be read nor displayed.
MP3/WMA file encoding information
❖
MP3:
❖
File format: MPEG-1 Audio
❖
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
❖
Bit rate: 32 to 320 kbps (constant bit rate or variable bit
rate)
The recommended recording setting for high-quality sound is
44.1 kHz sampling frequency and 128 kbps constant bit rate.
Advanced Disc Playback
MP3, WMA, JPEG, and Audio CD operation
❖
135
WMA:
❖
File format: WMA version 7 or 8
❖
Sampling frequency: 32 kHz/48 kbps, 44.1 kHz/48 to 92
kbps, 48 kHz/128 to 192 kbps A file recorded in mono
(48 kHz/48 kbps) is not supported by this LED TV/DVD
combination.
About the file browser
(Sample Image) File browser (CD)
File icons:
(Sample Image) File browser (CD)
If a CD contains a mixture of MP3, WMA and JPEG files, and the
PLAY button is pressed without selecting a file, playback
automatically begins starting from the first file in the list.
Setting the file type listing:
You can choose the type of files listed in the file browser.
1
Press the (
arrow) button to highlight to the Option panel.
2
Press the ( / arrow) buttons to highlight Select files, and
then press the OK button.
3
Press the ( / arrow) buttons to select a file type from the list
Audio or Photo.
4
Press the OK button to add or remove the check mark next to
each file type. The checked file type is displayed in the file
browser.
5
Press the ( arrow) button twice to move the selection
highlight back to the file list.
136
Advanced Disc Playback
MP3, WMA, JPEG, and Audio CD operation
Viewing image files in thumbnail mode:
You can change the browsers view mode from list mode to
thumbnail mode. This is convenient when browsing for JPEG files.
1
Press the DVD MENU button during JPEG playback.
2
Press the ( / / /
3
Press the OK button to play the image file.
arrow) buttons to select an image file.
To return the browser to list mode, press the STOP button.
To view the previous or next thumbnail page, press SKIP
REVERSE or SKIP BACKWARD.
Playing an audio file
1
Load an MP3/WMA/Audio CD in the disc slot. The file
browser appears on-screen. Press the ( / arrow) buttons to
select the audio file you wish to play. Press the PLAY button or
the OK button to start playback.
(Sample Image) Playing an audio file
2
Press the ( /
playback.
arrow) buttons to select another audio file for
(Sample Image) Playing an audio file
Advanced Disc Playback
MP3, WMA, JPEG, and Audio CD operation
3
137
Press the PLAY button or the OK button to start playback.
To stop playback, press the STOP button.
NOTE
❖ If the current directory has more than eight files, press the
( / arrow) buttons to scroll the file list.
❖ To see folder contents, select a folder and then press the OK
button.
❖ To return to the root directory, press the RETURN button or
select “Go Up” icon and then press the OK button.
❖ In thumbnail mode, press the PIC SIZE button repeatedly to
change the thumbnail size.
❖ The Repeat/Programmed playback modes can be enabled during
Audio CD, MP3, or WMA playback.
Viewing a JPEG file
1
Load a disc containing JPEG files in the disc slot. The file
browser appears on the screen.
2
Press the ( / arrow) buttons to select an image file to view.
A preview of the selected file is displayed in the Preview panel.
3
Press the OK button or the PLAY button.
The selected image is displayed in full-screen mode. The Slide
Show mode is enabled automatically. If you wish stop the Slide
Show mode, press the PAUSE button.
4
Press the SKIP Reverse or SKIP Forward button to view the
previous or next image file in the current directory.
To rotate an image:
Press the ANGLE button repeatedly until the preferred angle is
obtained. The image angle is adjusted in 90° increments.
The current angle setting is shown on the screen: 90°, 180°, 270° or
No rotation.
To magnify an image, press the ZOOM button repeatedly until the
image is displayed in the preferred scale.
The current zoom setting is indicated by the following: 100%,
125%, 150%, 200%, 50%, 75%.
To return to normal view, press the ZOOM button repeatedly until
ZOOM disappears.
138
Advanced Disc Playback
MP3, WMA, JPEG, and Audio CD operation
Viewing a slide show
If there are multiple JPEG files in the selected directory, you can
view them in a slide show. The instructions on how to enable the
slide show feature and set the interval period between pictures are
listed below.
1
Open the file folder containing the JPEG files you want to
include in the slide show.
2
Press the ( / arrow) buttons to select the file you want to be
the starting image for the slide show.
A preview of the selected file is displayed in the Preview panel.
(Sample Image) Viewing a slide show
3
Press the OK button or the PLAY button.
The selected image is displayed in full-screen mode.
When the slide show is completed, the file browser appears.
To view the previous or next image in the slide show, press the
SKIP Reverse or SKIP Forward button.
To temporarily stop the slide show, press the SKIP Reverse or
SKIP Forward button.
To stop the slide show, press the STOP button. The file browser
appears.
Advanced Disc Playback
MP3, WMA, JPEG, and Audio CD playback modes
NOTE
139
❖ The Rotate mode is available in regular JPEG viewing and slide
show modes.
❖ The A-B repeat mode is not available when viewing JPEG
images.
❖ During a slide show, the interval time between images may
increase if the file size is too big.
❖ When an image exceeds 5760 x 3840 pixels, the image display
can appear cropped. This applies when viewing the image in the
Preview panel of the file browser; or when in the thumbnail,
full-screen or slide show modes.
MP3, WMA, JPEG, and Audio CD playback modes
You can choose to repeat CD playback by track or the entire disc.
NOTE
These playback modes are only applicable during the current
session. Once you eject the disc or turn off the LED TV/DVD
combination, these modes will be disabled.
Enabling repeat playback
1
During stop mode, press the PLAY MODE button repeatedly
to select a repeat mode. The modes are Single, Repeat One,
Repeat Folder, Folder.
(Sample Image) Enabling repeat playback
2
Press the PLAY button.
The LED TV/DVD combination automatically starts repeat
playback from the current track.
To resume normal playback, select Folder in step 1 above.
140
Advanced Disc Playback
MP3, WMA, JPEG, and Audio CD playback modes
Programming the playback sequence
1
In the file browser, press the MARKER button to open the file
list
(Sample Image) Programming the playback sequence
NOTE
2
You can not select the same file twice or more. A JPEG file cannot be
added to a playlist.
Press the ( / arrow) buttons to select a file, and then press
the OK button to add it for inclusion in the programmed
playlist.
Repeat step 1 to remove any other files you wish to add in the
programmed playlist.
(Sample Image) Programming the playback sequence
Advanced Disc Playback
Customizing disc playback
3
141
Press the MARKER button,
The programmed files appear in the Playlist.
(Sample Image) Programming the playback sequence
4
In the programmed file list, press the ( / arrow) buttons to
select a file, and then press the PLAY button to start playback.
To remove a file from the programmed list:
1
In the Playlist, press the ( / arrow) buttons to select the file
you wish to remove, and then press the CANCEL button.
2
Repeat step 4 to mark any other files you wish to remove from
the list.
Customizing disc playback
You can customize the disc playback settings to suit your
preferences.
Configuring the disc playback settings (DVD/VCD/CD)
1
In DVD mode, press the SETUP button during stop mode.
(Sample Image) Configuring disc playback settings
142
Advanced Disc Playback
Customizing disc playback
2
Press the ( / arrow) buttons to select a setup tab, and then
press the ( arrow) button.
The first setup option is highlight.
(Sample Image) Configuring disc playback settings
3
Press the ( / arrow) buttons to select the setup option you
wish to customize.
4
Press the ( arrow) or the OK button to display a list of
available option settings.
5
Press the ( / arrow) buttons to select an option setting, and
then press the OK button to apply and save the setting.
6
To configure another option on the same setup tab, repeat steps
3–5.
7
To configure an option on another tab, press the ( arrow)
button, and then use the ( / arrow) buttons to select a setup
tab.
8
Repeat steps 3-5 to configure the preferred option.
9
To close the Setup screen, press the SETUP button.
Advanced Disc Playback
Customizing disc playback
143
Disc playback setup
Option
OSD Language
Audio
Disc Menu
Subtitle
Default
Downmix
Parental
Language
Preference
Password
Spdif Output
NOTE
Description
Selects the language for the setup screen display.
Selects the audio language for disc playback.
Selects the language for the DVD menu display.
Selects the subtitle language.
Resets to default.
Selects the downmix to options like Stereo.
Sets the restriction level for allowable disk
content.
Changes the access password for the parental
control setting.
Sets the sound format of the digital output.
Page
145
145
145
145
144
144
146
147
147
These setup settings are retained in the LED TV/DVD combination’s
memory. It remains active even if the power is turned off.
(Sample Image) Playback settings
OSD Language
Select the language for the DVD and Setup menu display. The
available options are English, French, or Spanish.
Subtitle/Audio
Select the language you wish to display the Audio, Disc Menu, and
Subtitle settings in during disc playback. The available options are
English, French, Spanish, Italian or German.
144
Advanced Disc Playback
Customizing disc playback
The selected language will be heard or seen.
(Sample Image) Playback settings
(Sample Image) Playback settings
Parental
A DVD is usually encoded with a rating level to indicate the
recommended audience age. You have the option to select the
content rating level allowed for playback in your LED TV/DVD
combination.
Press the ( / arrow) buttons to select the allowable rating level,
and then press the OK button. You will then need to type in the
system password to save the setting.
❖
Level 1–5: Discs of varied non-adult ratings will be played
back. The higher the number, the more severe the content is.
❖
Level 6–8: Discs of varied adult only ratings can be played
back.
Advanced Disc Playback
Customizing disc playback
NOTE
145
❖ The Parental rating levels correspond to the US movie ratings.
Level 1 – Kids Safe
Level 2 – G
Level 3 – PG
Level 4 – PG–13
Level 5 – PG–R
Level 6 – R
Level 7 – NC–17
Level 8 – Adult
❖ Some discs may not have their rating level encoded on the disc
though it’s indicated on the disc jacket. Playback restriction will
not apply to these discs so make sure to restrict access to it
manually.
To temporarily cancel the parental restriction:
1
Load the restricted content DVD that you want to play.
2
Use the Channel Number buttons (0–9) to input the system
password after the “Enter Password” message, and then press
the OK button.
This suspension of the parental restriction setting applies until
the disc is ejected.
(Sample Image) Playback settings
Password
Select this option to change the access password for the parental
control setting.
1
Press the ( / arrow) buttons to select Password, and then
press the OK button.
2
Highlight Change, and then press the OK button.
146
Advanced Disc Playback
Customizing disc playback
3
Use the Channel Number buttons (0–9) to input the current
password.
If the password has not been set yet, key in “0000.” This is the
factory default password.
4
Use the Channel Number buttons (0–9) to input the new
password.
You will be prompted to confirm the new password.
5
Use the Channel Number buttons (0–9) to input the new
password again.
6
Note this new password for future reference.
If you forget the system password:
1
Make sure there is no disc in the disc slot.
2
Press and hold down the VOLUME (–) button on the TV
control panel, and then press the number 4 button on the
remote control for a few seconds.
The “Initializing” message appears on-screen to indicate that
the password has been reset to its default factory setting
“0000.” All DVD Setup related settings will also be reset to
their default factory values.
Spdif Output (Digital Out)
Select the sound format of the digital output depending on the
enabled signal connection.
❖
Spdif/Raw: Select this option to output the signal in its native
format.
❖
Spdif/Pcm: Changes Dolby® Digital output to PCM. Select
this option when using a two-channel digital stereo amplifier.
NOTE
MPEG audio will always be in PCM format regardless of the Digital
Output setting.
Chapter 10
Troubleshooting
General troubleshooting
Before calling a service technician, review this chapter or visit the Toshiba
technical support Web site at support.toshiba.com for possible
causes/solutions for the problem you are experiencing.
Before you begin to troubleshoot any problem, first unplug the TV
from the AC wall outlet, wait approximately one minute, and then
plug the TV back into the AC wall outlet. If the problem still exists
attempt to troubleshoot the problem.
Black box on-screen.
The closed caption feature is set to one of the Text modes (T1, T2,
T3, or T4). Set the closed caption feature to Off, see “Using closed
captions” on page 78.
TV stops responding to controls.
If the TV stops responding to the buttons on the remote control or
TV control panel and you cannot turn off the TV, press and hold the
POWER button on the TV control panel for several seconds to
reset the TV. If the TV does not power off using this method,
unplug the TV from the AC wall outlet and plug it back in.
If you cause a static discharge when touching the TV and the TV
fails to function, simply unplug the TV from the AC outlet and plug
it back in. The TV should return to normal operation.
147
148
Troubleshooting
Picture problems
Other problems.
If your TV’s problem is not addressed in this Troubleshooting
chapter or the recommended solution has not worked, use the Reset
Factory Defaults procedure, see “Reset Factory Defaults” on
page 58.
TV will not turn on.
Ensure the power cord is plugged in properly, and then press the
POWER button.
Replace the batteries in the remote control, see “Installing
batteries” on page 40.
Try the control panel buttons on the TV.
Picture problems
General picture problems.
Check the antenna/cable connections, see “Connecting Your TV”
on page 24.
Press the INPUT button on the remote control or on the TV and
select a valid video input source, see “Selecting the video input
source” on page 59. If no device is connected to an input on the TV,
no picture appears when you select that particular input source. For
device connection details, see “Connecting Your TV” on page 24.
Antenna reception may be poor. Use a highly directional outdoor
antenna (if applicable).
The station may be having broadcast difficulties. Try another
channel.
Adjust the picture quality, see “Using the advanced picture
settings” on page 114.
Cannot view external signals or channel 3 or 4.
If you cannot view signals from external devices connected to
VIDEO, ColorStream® HD1, ColorStream® HD, HDMI 1, HDMI 2,
PC, or from channel 3 or 4, ensure that the Input Lock is set to Off,
see “Using the Locks menu” on page 86.
Noisy picture.
If you are watching an analog channel (off-air broadcast or cable
TV), you can set the CableClear® feature to reduce visible
interference in the TV picture, see “CableClear® digital Noise
Reduction” on page 116.
Troubleshooting
Sound problems
149
Video Input Selection problems.
If the Input Selection window does not appear when you press
INPUT on the remote control or TV, press INPUT a second time.
This will cause a change to the next video input source and display
the Input Selection window.
Poor display color or no color.
The station may be having broadcast difficulties. Try another
channel.
Adjust the Tint and/or Color, see “Color temperature” on page 115.
Poor composite picture.
If the TV is connected to an external A/V device (e.g. DVD player,
video game system, set-top box, etc.) try using a ColorStream® or
HDMI® video connection instead.
Picture and sound are out of sync.
As with all products that contain a digital display, this may occur in
rare instances, when viewing certain content (e.g. television
broadcasts, video games, DVDs). The cause may include, without
limitation, video processing within the TV, video processing in an
attached gaming system, and video processing or different
compression rates used by broadcasters in their programming.
Try the following:
❖
If the TV is connected to an A/V receiver that has a
programmable audio delay feature, use this feature to help
synchronize the sound to the picture.
❖
If the problem occurs only on certain TV channels, inform
your local broadcast, cable, or satellite provider.
❖
Digital audio settings may not be correct. Check the
connections, see “Connecting a digital audio system” on
page 35.
❖
Turn off and unplug the TV from the AC wall outlet for a few
seconds and plug it back in.
Sound problems
Check the antenna/cable connections, see “Connecting a VCR,
antenna, or cable TV” on page 27.
The station may be having broadcast difficulties. Try another
channel.
The sound may be muted. Press the VOL (+) button.
150
Troubleshooting
Remote control problems
If you hear no sound, try setting the MTS feature to Stereo mode,
see “Using the MTS button” on page 83.
If you are not receiving a second audio program from a known SAP
source, make sure the MTS feature is set to SAP mode, see
“Selecting stereo/SAP broadcasts” on page 82.
If you hear audio that seems incorrect for the program you are
watching (such as music or a foreign language), the SAP mode may
be on. Set the MTS feature to Stereo mode, see “Selecting
stereo/SAP broadcasts” on page 82.
If you connect a computer using either the PC IN terminal or an
HDMI® terminal, make sure that the audio setting is properly set,
see “Connecting a digital audio system” on page 35.
Remote control problems
Remove all obstructions between the remote control and the TV.
Replace the remote control’s batteries, see “Installing batteries” on
page 40.
Your TV’s remote control may not operate certain features on your
external device. Refer to the User’s Guide for your other device to
determine its available features. If your TV remote control does not
operate a specific feature on another device, use the remote control
that came with the device, see “Learning about the remote control”
on page 42.
If the TV still does not act as expected, perform the Reset Factory
Defaults procedure, see “Reset Factory Defaults” on page 58.
Channel tuning problems
Ensure that the remote control is set to the correct device mode, see
“Learning about the remote control” on page 42.
The Auto Tuning feature may have erased the channel from
memory. Add the channel to the channel memory, see “Storing
channels in memory (optional)” on page 52.
The Lock feature may have blocked the channel. Unblock the
channel, see “Locking channels” on page 94.
If you cannot tune digital channels, check the antenna
configuration. If the problem persists, clear all channels from the
channel list and reprogram channels into the memory, see “Storing
channels in memory (optional)” on page 52. For additional
information, see “TV stops responding to controls.” on page 147. If
the problem persists, use the Reset Factory Defaults procedure, see
“Reset Factory Defaults” on page 58.
Troubleshooting
Closed caption problems
151
Closed caption problems
If the program or video you have selected is not closed captioned,
no captions appear on the screen.
If text is not available, a black rectangle may appear. If this
happens, turn off the closed caption feature, see “Using closed
captions” on page 78.
A closed caption signal may not display correctly under the
following circumstances:
❖
The recording is dubbed
❖
The signal reception is weak
❖
The signal reception is non-standard
For additional information, see “Using closed captions” on page 78.
Rating blocking (V-Chip) problems
Forgotten PIN code.
When the PIN code screen appears, press the INFO button 4 times
within approximately 5 seconds. The old PIN code is cleared, see
“Forgotten PIN code” on page 87.
The V-Chip feature is available for U.S. V-Chip systems only, see
“Using parental controls (for USA region)” on page 88.
No HDMI®-CEC operation
The HDMI®-CEC feature is available for Toshiba
HDMI®-CEC compatible devices.
Ensure that HDMI® cables with the (
) Logo are used.
®
When the connected HDMI -CEC device does not work correctly
after you have changed device’s settings, turn off your TV and
unplug the power cord, then plug it in and turn on again.
If several devices are connected, the HDMI®-CEC feature may not
operate properly.
Read the instruction manual provided with the connected
HDMI®-CEC device.
152
Troubleshooting
HDMI® problems
HDMI® problems
HDMI® cables.
Ensure that HDMI® cables with the (
) Logo are used, see
“Connecting an HDMI® or DVI device to the HDMI® input” on
page 31.
Legacy HDMI® sources.
Some legacy HDMI® sources may not work properly with the latest
HDMI® TV products, due to new standard adoption.
Media Player problems
Incorrect functionality may occur when using a USB HUB
connection.
Photo files that were processed and edited using the computer’s
application software may not be viewable.
The TV may select one format automatically and play it when
contents that support two or more formats are played.
Confirm that the contents of the USB storage device are in formats
that are supported by this TV, see “Using the Media Player” on
page 99.
Disc playback problems
Playback does not start.
No disc is loaded.
The disc may be dirty. Clean the disc.
The disc format is not supported, see “Disc playback” on page 119.
No picture.
The TV is not in DVD mode.
No sound.
The TV is in the special playback mode, see “Disc playback” on
page 119.
If an external speaker is connected, check its volume control.
Picture distortion during fast reverse/forward playback.
The picture will be distorted occasionally. This is normal.
Troubleshooting
light indicator
153
Playback features failure.
The playback features such as stopping, searching, slow motion
play, repeat play or programmed play, etc. are not applicable to all
discs.
Playback does not start when the title is selected.
The disc may not be compliant with the “Parental” setting, see
“Customizing disc playback” on page 141.
The audio sound track and/or subtitle language cannot be
changed.
The disc has no multi-language option encoded on it, see “Sound
track language/Audio channel/Subtitle” on page 131.
No subtitle.
The disc has no subtitle encoded on it.
Subtitles are disabled. Press the SUB TITLE button, see “Viewing
subtitles (DVD)” on page 131.
Scene angle cannot be changed.
The disc has no multi-angle scenes, see “Sound track
language/Audio channel/Subtitle” on page 131. An “X” appears on
the screen.
The function is not applicable to the disc or to the current mode.
light indicator
The Power light on the front of the TV indicates the TV’s status, as
described below.
Power indicator
The Power indicator glows green when the TV power is On.
If the problem persists after trying the solutions
Contact Toshiba at:
Toshiba’s Support Web site: support.toshiba.com.
For technical support, call the Toshiba Customer Support Center:
Within the United States, at 800-631-3811
Outside the United States, at 949-583-3050
Appendix A
Specifications
NOTE
❖ These models comply with the specifications listed below.
❖ Designs and specifications are subject to change without notice.
❖ These models may not be compatible with features and/or
specifications that may be added in the future.
Television system
NTSC standard
ATSC standard
Digital Cable
8VSB
64 QAM, 256 QAM; in-the-clear, unencrypted
Channel coverage
VHF
UHF
Cable TV
154
2 through 13
14 through 69
Mid band (A-8 through A-1, A through I)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 135)
Specifications
Power source
Power source
120 V AC, 60 Hz
Power maximum current
24V4210U
0.65 A
Power consumption
24V4210U
0.65 A (maximum current)
0.12W (Standby mode)
Audio power
24V4210U
5W + 5W
Speaker type
24V4210U
Two 3-5/8 x 1 x 7/8 inches
(91 x 25 x 23mm)
Video/audio terminals
Video/audio input
Video
Audio
1 V (p-p), 75 ohm, negative sync.
200 mV(rms) (-20dBFS, 47K ohm or greater)
ColorStream® (component video) HD input
Video
Audio
Y: 1V(p-p), 75 ohm, negative sync.
Y: 1V(p-p), 75 ohm, negative sync.
PB: 0.7 V(p-p), 75 ohm
Suggested formats: 1080i, 720p, 480p, 480i
200 mV(rms) (-20dBFS, 47K ohm or greater)
155
156
Specifications
Dimensions
HDMI® input
HDMI® compliant
HDCP compliant
HDMI® Audio
2-channel Linear-PCM; 32/44.1/48 kHz sampling
frequency; 16/ 20/24 bits per sample
Digital audio output
Optical type
PC input
15-Pin D-sub Analog RGB
DVD/CD player
Signal system
NTSC
Supported disc size 12 cm
Pickup mechanism 1-lens, 2-beams
Dimensions
24V4210U
Width
Height
Depth
22.94” (583.1mm)
16.17” (410.9mm)
9.18” (233.2mm)
Mass (weight)
24V4210U
13.2 lbs (6.0 kg)
Operating conditions
Temperature
Humidity
32 - 95º F (0 - 35º C)
20 - 80% (no moisture condensation)
Specifications
Supplied accessories
157
Supplied accessories
❖
Remote control with two size “AAA” batteries
❖
Resource Guide
❖
Quick Start Guide
❖
Pedestal stand
Acceptable signal formats for PC IN, HDMI®
PC IN signal formats
NOTE
Depending on the connected PC, the following status may occur;
incorrect display, false format detection, picture position failure, blur,
or judder. But this is not a malfunction of your TV.
Format Resolution
V. Frequency
H. Frequency
Pixel Clock
Frequency
VGA
640 x 480
59.940/60 Hz
31.469 kHz
25.175 MHz
SVGA
800 x 600
60.317 Hz
37.879 kHz
40.000 MHz
XGA
1024 x 768
60.004 Hz
48.363 kHz
65.000 MHz
WXGA
1280 x 768
59.870 Hz
47.776 kHz
79.500 MHz
1360 x 768
60.015 Hz
47.712 kHz
85.500 MHz
1280 x 1024
60.020 Hz
63.981 kHz
108.000 MHz
SXGA
HDMI® signal formats
Format Resolution
V. Frequency
H. Frequency
Pixel Clock
Frequency
VGA
640 x 480
59.940 Hz
31.469 kHz
25.175 MHz
SVGA
800 x 600
60.317 Hz
37.879 kHz
40.000 MHz
XGA
1024 x 768
60.004 Hz
48.363 kHz
65.000 MHz
1280 x 768
59.870 Hz
47.776 kHz
79.500 MHz
1360 x 768
60.015 Hz
47.712 kHz
85.500 MHz
SXGA
1280 x 1024
60.020 Hz
63.981 kHz
108.000 MHz
480i
720 x 480i
59.940 Hz
15.734 kHz
27.000 MHz
WXGA
158
Specifications
Acceptable signal formats for PC IN, HDMI®
Format Resolution
V. Frequency
H. Frequency
Pixel Clock
Frequency
480p
720 x 480p
59.940 Hz
31.469 kHz
27.000 MHz
720p
1280 x 720p
60.000 Hz
45.000 kHz
74.250 MHz
1080i
1920 x 1080i
60.000 Hz
33.750 kHz
74.250 MHz
1080p
1920 x 1080p
24.000 Hz
27.000 kHz
74.250 MHz
60.000 Hz
67.500 kHz
148.500 MHz
NOTE
❖ Some illustrations in this User’s Guide are for explanation
purposes and may differ from the actual unit.
❖ Designs and specifications are subject to change without notice.
❖ These models may not be compatible with features and/or
specifications that may be added in the future.
Appendix B
License Agreement
License Information on the software used in the
TOSHIBA Digital TV
The software pre-installed in the TOSHIBA Digital Televisions consists of multiple,
independent software components. Each software component is copyrighted by TOSHIBA
or a third party.
The TOSHIBA Digital Televisions uses software components that are distributed as
freeware under a third-party end-user license agreement or copyright notice (hereinafter
referred to as a "EULA"). Some EULAs require that the source code of the applicable
component be disclosed as the condition for distributing the software component in
executable format.
In addition, some of the software components which are used in Toshiba Digital Televisions
include the software that are made or developed originally by TOSHIBA. These software
and accompanied documents are copyrighted by TOSHIBA, and protected by Copyright
Act, an international treaty's articles and other governing laws. The software components
which are made or developed originally by TOSHIBA and not subject to EULAs are not a
target of source code offering.
The Toshiba warranty provided in respect of the Digital TV is the only warranty provided
and no additional warranties are provided in respect of the software components subject to
EULAs.
Some of the software components distributed under EULAs are made available for use by
the user on the premise that they are not copyrighted or warranted by TOSHIBA or any third
party. These software components are licensed to the user free of charge and therefore not
covered by any warranty within the scope of the applicable laws. These software
components are provided in "as is" condition without any warranty, whether express or
implied. "Warranty" here includes, but not limited to, an implied warranty for marketability
159
160
License Agreement
or fitness for specific uses. All risks associated with the quality or performance of these
software components are assumed by the user. TOSHIBA shall not be liable whatsoever for
any cost of repair or correction or other incidental expense incurred in connection with a
defect found in any of these software components. Unless specified under the applicable
laws or in a written agreement, a party who changes or redistributes the software with
consent from the copyright holders or based on the aforementioned licenses shall not be held
liable whatsoever for any loss arising from the use of or inability to use such software
components. The same applies even when the copyright holders or relevant third parties
have been informed of the possibility of such loss. "Loss" here includes normal, special,
incidental and indirect loss (including, but not limited to, the loss of data or its accuracy; loss
incurred by the user or any third party; and interface incompatibility with other software).
Please read each EULA for details on the use conditions and items that must be observed
regarding these software components.
The table below lists the software components pre-installed in the TOSHIBA Digital
Televisions, which are subject to EULAs. The user should read the applicable EULAs
carefully before using these software components. The EULAs are exhibited in their
original text (English) as exactly written by the respective parties other than TOSHIBA.
For at least three (3) years from the date of distribution of the this product, Toshiba will give
to anyone who contacts Toshiba Consumer Solutions at (800) 631-3811, for a charge of no
more than our cost of physically performing source code distribution, a complete machinereadable copy of the complete corresponding GPL and LGPL source code for the version of
the GPL and LGPL code that we distributed to you in this product.
Pre-Installed Software - EULA
jpeglib.h - Exhibit A
FreeType 2.2.0 - Exhibit B
scalfact.c - Exhibit C
Exhibit A
The authors make NO WARRANTY or representation, either express or implied, with
respect to this software, its quality, accuracy, merchantability, or fitness for a particular
purpose. This software is provided "AS IS", and you, its user, assume the entire risk as to its
quality and accuracy.
This software is copyright (C) 1991-2011, Thomas G. Lane, Guido Vollbeding.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or portions
thereof) for any purpose, without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README file
must be included, with this copyright and no-warranty notice unaltered; and any additions,
deletions, or changes to the original files must be clearly indicated in accompanying
documentation.
(2) If only executable code is distributed, then the accompanying documentation must state
that "this software is based in part on the work of the Independent JPEG Group".
License Agreement
161
(3) Permission for use of this software is granted only if the user accepts full responsibility
for any undesirable consequences; the authors accept NO LIABILITY for damages of any
kind.
These conditions apply to any software derived from or based on the IJG code, not just to
the unmodified library. If you use our work, you ought to acknowledge us.
Permission is NOT granted for the use of any IJG author's name or company name in
advertising or publicity relating to this software or products derived from it. This software
may be referred to only as "the Independent JPEG Group's software".
We specifically permit and encourage the use of this software as the basis of commercial
products, provided that all warranty or liability claims are assumed by the product vendor.
ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole proprietor
of its copyright holder, Aladdin Enterprises of Menlo Park, CA. ansi2knr.c is NOT covered
by the above copyright and conditions, but instead by the usual distribution terms of the Free
Software Foundation; principally, that you must include source code if you redistribute it.
(See the file ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part of
any program generated from the IJG code, this does not limit you more than the foregoing
paragraphs do.
The Unix configuration script “configure” was produced with GNU Autoconf. It is
copyright by the Free Software Foundation but is freely distributable. The same holds for its
supporting scripts (config.guess, config.sub, ltmain.sh). Another support script, install-sh, is
copyright by X Consortium but is also freely distributable.
The IJG distribution formerly included code to read and write GIF files. To avoid
entanglement with the Unisys LZW patent, GIF reading support has been removed
altogether, and the GIF writer has been simplified to produce “uncompressed GIFs.” This
technique does not use the LZW algorithm; the resulting GIF files are larger than usual, but
are readable by all standard GIF decoders.
We are required to state that
“The Graphics Interchange Format(c) is the Copyright property of CompuServe
Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated.”
Exhibit B
The FreeType Project LICENSE
2002-Apr-11
Copyright 1996-2002 by
David Turner, Robert Wilhelm, and Werner Lemberg
Introduction
The FreeType Project is distributed in several archive packages; some of them may contain,
in addition to the FreeType font engine, various tools and contributions which rely on, or
relate to, the FreeType Project.
This license applies to all files found in such packages, and which do not fall under their
own explicit license. The license affects thus the FreeType font engine, the test programs,
documentation and makefiles, at the very least.
162
License Agreement
This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses,
which all encourage inclusion and use of free software in commercial and freeware products
alike. As a consequence, its main points are that:
❖ We don't promise that this software works. However, we will be interested in any kind
of bug reports. (`as is' distribution)
❖ You can use this software for whatever you want, in parts or full form, without having
to pay us. (`royalty-free' usage)
❖ You may not pretend that you wrote this software. If you use it, or only parts of it, in a
program, you must acknowledge somewhere in your documentation that you have
used the FreeType code. (`credits')
We specifically permit and encourage the inclusion of this software, with or without
modifications, in commercial products. We disclaim all warranties covering The FreeType
Project and assume no liability related to The FreeType Project.
Finally, many people asked us for a preferred form for a credit/disclaimer to use in
compliance with this license. We thus encourage you to use the following text:
Portions of this software are copyright © 1996-2002 The FreeType
Project (www.freetype.org). All rights reserved.
Exhibit C
scalfact.c Scalefactors for layer I and II This program is free software; you can redistribute it
and/or modify it under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your option) any later
version. This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this
program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge,
MA 02139, USA.
Index
A
advanced picture settings
CableClear® digital Noise
Reduction 116
Color temperature 115
Dynamic Contrast 114
Game Mode feature 117
MPEG Noise Reduction 117
Static Gamma 115
using 114
audio
adjusting quality 83
Audyssey ABX™ 84
Dolby® Digital Dynamic Range
Control 85
MTS button 83
muting sound 81
optical audio output format 85
stereo/SAP broadcasts 82
Auto Aspect
using 74
auto power down
set 107
auto power off feature 113
Auto Start function
Media Player 100
B
blocking programs
Canada rating 92
C
cables
3.5mm to RCA Y-cable 26
analog RGB (15-pin) 26
coaxial (F-type) 24
component video (red/white/
yellow) 25
HDMI® 25
optical audio 26
overview of cables 24
standard A/V (red/white/yellow)
25
channel
switching between two channels
68
tuning channels 67
tuning to a specific channel 68
Channel Browser
elements 65
163
164
Index
tuning channels 63
Channel Return
switching between two channels
68
channels
auto tuning 52
locking channels 94
skipping 54
specific channel 67
storing in memory 52
cinema mode
selecting 75
closed captions
CC selector 80
Digital CC settings 80
using 78
computer
setting the audio 98
using with the TV 97
connecting
a computer 37
audio system 35
cable TV 27
camcorder 28
computer to TV’s PC IN 37
DVD player with ColorStream®
29
DVI device to HDMI® input 31
HDMI® device to HDMI® input
31
HDMI®-CEC 34
satellite receiver 30
TV’s HDMI® 39
VCR and antenna 27
D
digital audio selector
using 82
Digital Signal Meter
viewing 57
Disc
audio channel 131
DVD menu 130
playback information 132
scene angle 130
scene bookmark 126
sound track language 131
subtitle 131
title selection 130
VCD playback control 132
disc
/A-B repeat mode (DVD/VCD/
CD) 129
audio channel (VCD) 131
DVD menu 130
DVD title 130
enable repeat playback 128
enabling PBC function 132
enabling repeat playback 139
file browser 135
locating a scene 125
playback info (DVD/VCD) 132
playback options 143
playback sequence 140
playback setting 141
playback/A-B repeat 128
playing audio file 136
scene 124
scene angle DVD 130
scene bookmark (DVD/VCD)
127
sound track language (DVD) 131
viewing JPEG file 137
viewing scene bookmark 128
viewing slide show 138
viewing subtitles (DVD) 131
zoom 124
zoom DVD/VCD 124
disc playback 119
customizing 141
DVD/VCD/CD 119
playback reminders 121
removing a disc 121
disc playback navigation 122
Index
chapter or track 123
fast reverse, fast forward 122
frame by frame 123
slow motion 123
E
Elements 65
F
factory defaults
reset 58
favorites browser 64
features 18
Freeze
feature 75
G
GameTimer®
using 95
H
HDMI® audio mode
setting 55
HDMI®-CEC
additional functions 111
using 108
volume/mute controls 110
History List
adding/clearing channels 67
adding/clearing inputs 67
I
information
MP3/WMA/JPEG/Audio 133
Initial setup 50
initial setup
main menu layout 46
input lock feature
using 94
L
last mode memory feature 113
Locks menu
setting pin code 86
165
M
Media Player
open 100
photo files 101
playing music files 103
using 99
menu
layout 47
navigation 48
setup 47
N
no signal power down
set 108
O
operation
MP3/WMA/JPEG/Audio CD
133
overview
installation 19
setup 19
use 19
P
panel lock feature
using 96
parental controls
blocking programs/movies by
rating (V-Chip) 88
using 88
PC Audio
setting 98
PC settings feature
using 97
picture
adjusting 76
adjusting quality 77
picture mode
selecting 76
picture size
4
3 72
166
Index
Dot by Dot 73
Full 70
Native 72
Normal 73
selecting 69
TheaterWide 1 71
TheaterWide 2 71
TheaterWide 3 71
pin code
changing 87
entering PIN code 86
forgotten 87
playback modes
MP3/WMA/JPEG/Audio CD
139
program ratings
displaying 92
unlocking programs 93
Q
quick setup
ANT/CABLE IN 51
menu language 51
R
rating system 91
downloading additional 89
S
screen angle
adjusting 22
scrolling
TheaterWide® picture 73
specifications
acceptable signal formats 157
audio power 155
channel coverage 154
ColorStream® HD input 155
Digital audio output 156
dimensions 156
DVD/CD player 156
HDMI® input 156
HDMI® signal formats 157
mass (weight) 156
operating conditions 156
PC IN signal formats 157
PC input 156
power consumption 155
power maximum current 155
power source 155
speaker type 155
supplied accessories 157
TV system 154
video/audio terminals 155
SurfLock™
switching between two channels
68
system status
viewing 58
T
time zone
setting 57
timer
sleep timer 106
troubleshooting 147
channel tuning problems 150
closed caption problems 151
contact Toshiba 153
disc playback problems 152
HDMI® 152
light indicator 153
media player problems 152
No HDMI®-CEC operation 151
picture problems 148
power indicator functions 153
Rating blocking problems 151
remote control problems 150
sound problems 149
Tuning 63
TV connections
front 20
side 20
TV panel connections
back 22
Index
TV panel controls
front 20
left side 20
side 20
TV remote
functionality 42
install batteries 40
TV remote control
using 40
TV status information
show 112
V
video input source
selecting 59
video input sources
labeling 61
167
Download PDF