IMUX 2000s

SOLUTIONS FOR AN EVOLVING WORLD
IMUX 2000s
SONET/SDH
Description
The IMUX 2000s SONET/SDH Module is an innovative and cost-effective solution from RFL that leverages your
existing IMUX 2000 T1/E1 multiplexer and MDACS equipment to instantly expand your infrastructure for delivery of
Gigabit Ethernet services, while continuing to support existing traditional TDM services. The IMUX 200Os SONET/SDH module, designed to fit into existing IMUX 2000 family multiplexer, provides a straightforward and easy
migration from T1/E1 to an OC-12/STM-4 communications backbone without replacing the core IMUX 2000 multiplexing equipment.
Key Features & Benefits
Instant 400x Bandwidth Upgrade
The 2000s SONET/SDH module, designed to fit into an existing IMUX 2000 T1/E1 Multiplexer
and MDACS, allows for instant upgrade from T1/E1 to OC-12/STM-4, communications backbone,
to provide greater bandwidth capacity for video and other high-bandwidth applications.
Low-cost and easy migration path to SONET/SDH
With an easy and straightforward low-cost migration path to a SONET/SDH
communications infrastructure, the IMUX 2000s SONET/SDH module leverages
existing IMUX 2000 T1/E1 multiplexers and/or MDACS and provides cost savings
while eliminating costs and complexity of installing a SONET/SDH new system.
Gigabit Ethernet Services
The IMUX 2000s SONET/SDH module drives E-Line and E-LAN services to the
network edge, delivering resilient, managed IP-based services including Gigabit
Ethernet services using VCAT with dynamic LCAS up to 622Mbps speed.
IMUX 2000s SONET/SDH
1
April 2013
Key Features and Benefits (continued)
Ethernet over SONET (EoS)
The module offers Ethernet over SONET with layer 1 physical separation meeting NERC CIP requirements
Interfaces
The IMUX 2000s SONET/SDH module is equipped with the following interfaces:
SONET/SDH Trunk
TDM
Ethernet
Craft Ports
2x 622Mbps/155Mbps SFP receptacles
2x 155Mbps SFP receptacles
2x Gigabit Ethernet SFP receptacles
1x 10/100BaseT RJ-45 port for management
4x DS1/E1 RJ45 ports
2x USB Type B craft ports for command line interface
Network Topologies
The IMUX 2000s SONET/SDH module has four fiber optic SONET/SDH interfaces
which support a wide range of installation network topologies.
— Terminal Mux 1+1 OC-12/STM-4, OC-3/STM-1
— Linear 1+1 MSP/1+1 Line OC-3/STM-1
— Protected Rings SNCP OC-12/STM-4, OC-3/STM-1
— Ring Interconnects SNCP OC-12/STM-4 to
OC-3/STM-1, OC-3/STM-1 to OC-3/STM-1
— Ring Interconnects SNCP OC-12/STM-4 ring to 2 x OC-3/STM-1 tails
System Timing
The IMUX 2000s SONET/SDH module can be configured to generate an internal “master” network clock using its integrated
Stratum 3 (4.6 ppm) clock. It can also obtain clocking from external sources, such as Trunk Ports and E1/DS1 circuits
Element Management Software
The IMUX 2000s Element Management System (EMS) communicates with the IMUX 2000s SONET/SDH module
via the USB craft port, or via TCP/IP connection over 10/100/ Ethernet port. Remote IP-based management is
accomplished over DS1/E1 to the management channel, or PPP/IP connectivity over the DCC channel. In addition,
the integrated management router can extend the reach of the existing IP management network using SONET/SDH
DCCs. The IMUX 2000s EMS supports concurrent SNMP management with Syslog monitoring and reporting.
The IMUX 2000s EMS features a real time visual display of node status, and gathers performance and fault statistics
from all connected IMUX 2000s SONET/SDH Multiplexer. Cross connecting Ethernet and/or T1/E1 tributaries is
simple using the included DACS configuration tool where the switch fabric is full duplex and non-blocking.
The IMUX 2000s EMS is a powerful and intuitive tool that enables management of a network comprising local
and remote units. The IMUX 2000s EMS intuitive graphical user interface, empowers operators to realize
the full market potential of their services with the economy of remote management and diagnostics.
April 2013
2
IMUX 2000s SONET/SDH
Upgrade and Application Solution
Ethernet over SONET (EoS)
The module offers Ethernet over SONET with layer 1 physical separation meeting NERC CIP requirements
Interfaces
The IMUX 2000s SONET/SDH module is equipped with the following interfaces:
SONET/SDH Trunk
TDM
Ethernet
Craft Ports
2x 622Mbps/155Mbps SFP receptacles
2x 155Mbps SFP receptacles
2x Gigabit Ethernet SFP receptacles
1x 10/100BaseT RJ-45 port for management
4x DS1/E1 RJ45 ports
2x USB Type B craft ports for command line interface
Network Topologies
The IMUX 2000s SONET/SDH module has four fiber optic SONET/SDH interfaces
which support a wide range of installation network topologies.
— Terminal Mux 1+1 OC-12/STM-4, OC-3/STM-1
— Linear 1+1 MSP/1+1 Line OC-3/STM-1
IMUX 2000s SONET/SDH
3
April 2013
Technical Specifications
Temperature:
-20°C to 65°C
Humidity:
0% to 95%
non-condensing
Management:
IMUX 2000s
EMS:
front panel USB,
front panel Ethernet
or over the DCC
Routing:
RIP v1/2,
OSPF
Centralized
software update:
Yes
Centralized
Management:
Yes
SFP DDMI:
Multi Source
Agreement
for SFPs (SFF-8472)
SNMP:
Yes
Power consumption:
14 Watts maximum
Syslog:
Yes
Compliances
Environmental:
EMC:
RoHS
R-1089 CORE, FCC 68, AS 3548,
CISPR-22, EN 55022, AS-NZS 3548
Safety:
EN 60950, UL 60950, UL 1950, AS-NZS 60950:2000,
IEC60825-1 & 2 for Laser Safety, EB
Other Compliances:
Immunity:
ITU-T K.11
IEC1000-4-2 and IEC801-2 for electrostatic discharge
IEC1000-4-3 and IEC801-3 for EMC immunity
Compliance Marks:
IEC1000-4-4 and IEC801-4 forElectrical transients
CE, CB, FCC15a,
“A” Tick (incorporates “C” Tick)
IEC1000-4-5 and IEC801-5 for Mains Surge
IEC1000-4-11
IMUX 2000 T1/E1 Multiplexer with 2000s Sonet/SDH Module
RFL Electronics Inc.
353 Powerville Road
Boonton, NJ 07005, USA
IMUX 2000 T1/E1 MDACS Multiplexer with 2000s Sonet/SDH Module
April 2013
4
Tel: 973.334.3100
Fax:973.334.3863
www.rflelect.com
IMUX 2000s SONET/SDH
Download PDF