Sony Remote RMT-V501e

Add to my manuals
1 Pages

advertisement

Sony Remote RMT-V501e | Manualzz

Sony Remote RMT-V501e

Follow these steps to program the remote control to operate a television.

1. Turn on the television to be programmed.

2. On the remote control, move the TV/DVD VIDEO switch to TV.

3. Press and hold the I/O button.

4. While holding the I/O button, enter the television manufacturer code number using the number pad.

NOTE: If more than one code number is listed for the manufacturer, enter one code at a time until you find one that works.

5. Release the I/O button.

6. Point the remote control at the television.

7. Press the POWER button to verify operation.

NOTES:

If a new code number is entered, the code number previously entered will be erased.

When the batteries are replaced, the programmed codes may be erased. It may be necessary to reprogram the remote after replacing the batteries.

Some product functions may not be able to be controlled by the remote control. Use the remote control provided with the component.

In some rare cases, you may not be able to operate your non-Sony equipment with the supplied remote control. This is because your equipment may use a code that is not provided with this remote control. In this case, please use the equipment's

own remote control.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement