DDX6902S
DDX6702S
MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial
numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model DDX6902S/DDX6702S Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2015 JVC KENWOOD Corporation
DDX_6902S.indb 1
B5A-0987-00 (KN)
2015/07/24 14:07
CONTENTS
BEFORE USE............................................................ 2
How to reset your unit.................................................... 3
INITIAL SETTINGS .................................................. 4
BASICS .................................................................... 6
Component names and functions ............................. 6
Common operations ....................................................... 6
Common screen operations......................................... 7
Selecting the playback source..................................... 9
DISCS .................................................................... 10
USB........................................................................ 15
iPod/iPhone ......................................................... 17
APPS ..................................................................... 20
Pandora® .............................................................. 23
iHeartRADIO......................................................... 25
AUPEO! ................................................................. 27
HD Radio™ tuner .................................................. 29
SiriusXM® Satellite Radio .................................... 32
OTHER EXTERNAL COMPONENTS ...................... 39
Using external audio/video players—AV-IN ........39
Using a rear view camera ............................................39
Using an external component via ADS adapter—
OEM Features...................................................................41
BEFORE USE
BLUETOOTH ......................................................... 42
SETTINGS .............................................................. 50
Settings for using applications of iPod/iPhone/
Android ..............................................................................50
Sound adjustment .........................................................51
Adjustment for video playback.................................53
Changing the display design .....................................55
Customizing the <TOP MENU> screen .................56
Customizing the system settings .............................56
Setting menu items .......................................................58
CONNECTION/INSTALLATION ............................ 61
REFERENCES ......................................................... 67
Maintenance ....................................................................67
More information ...........................................................67
Error message list ...........................................................70
Troubleshooting .............................................................72
Specifications...................................................................73
How to read this manual:
• Illustrations of DDX6902S are mainly used for explanation. The displays and panels shown in this manual
are examples used to provide clear explanations of the operations. For this reason, they may be different
from the actual displays or panels.
• This manual mainly explains operations using the buttons on the monitor panel and touch panel. For
operations using the remote controller (KNA-RCDV331: optional accessory), see the instructions supplied
with the remote controller.
• < > indicates the various screens/menus/operations/settings that appear on the touch panel.
• [ ] indicates the buttons on the touch panel.
• Indication language: English indications are used for the purpose of explanation. You can select the
indication language from the <Setup> menu. (Page 60)
• Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available
from <http://www.kenwood.com/cs/ce/>.
IMPORTANT
To ensure proper use, please read through this
manual before using this product. It is especially
important that you read and observe WARNINGS
and CAUTIONS in this manual. Please keep the
manual in a safe and accessible place for future
reference.
V WARNINGS: (To prevent accidents and
damage)
• DO NOT install any unit or wire any cable in a
location where;
– it may obstruct the steering wheel and gearshift
lever operations.
– it may obstruct the operation of safety devices
such as air bags.
– it may obstruct visibility.
• DO NOT operate the unit while driving.
If you need to operate the unit while driving, be
sure to look around carefully.
• The driver must not watch the monitor while
driving.
V CAUTION
Use of controls or adjustments or performance
of procedures other than those specified herein
may result in hazardous radiation exposure. In
compliance with Federal Regulations, the following
are reproductions of labels on, or inside the product
relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO,
JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES
21CFR SUBCHAPTER J IN EFFECT AT DATE OF
MANUFACTURE.
Location : Top plate
2
DDX_6902S.indb 2
2015/07/24 14:07
BEFORE USE
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications are expressly approved in the
instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or
modification is made.
FCC NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment may cause harmful interference to
radio communications, if it is not installed and used
in accordance with the instructions. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
IC (Industry Canada) Notice
This device complies with Industry Canada licenseexempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of the
device.
The term “IC: ” before the certification/registration
number only signifies that the Industry Canada
technical specification were met.
CAUTION
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and
RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that
it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it
should be installed and operated keeping the radiator
at least 20 cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
• Contains Transmitter Module
FCC ID : YZP-RBFAC21XX
• Contains Transmitter Module
IC: 7414A-RBFAC21XX
V Cautions on the monitor:
• The monitor built into this unit has been
produced with high precision, but it may have
some ineffective dots. This is inevitable and is not
considered defective.
• Do not expose the monitor to direct sunlight.
• Do not operate the touch panel using a ball-point
pen or similar tool with a sharp tip.
Touch the buttons on the touch panel with your
finger directly (if you are wearing a glove, take it
off).
• When the temperature is very cold or very hot...
– Chemical changes occur inside, causing
malfunction.
– Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with
the sound or picture quality may decline in such
environments.
For safety...
• Do not raise the volume level too much, as this
will make driving dangerous by blocking outside
sounds, and may cause hearing loss.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
❏ How to reset your unit
If the unit fails to operate properly, press the reset
button.
ENGLISH
DDX_6902S.indb 3
3
2015/07/24 14:07
INITIAL SETTINGS
2 Finish the procedure.
Initial setup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the <Setup>
screen. (Page 58)
Activating the security function
You can activate the security function to protect
your receiver system against theft.
1 Display the <System> setting screen.
On the <TOP MENU> screen:
1
The <TOP MENU> screen is displayed.
<Demonstration>
(Page 59)
<Language>
(Page 60)
<R-CAM
Interrupt>
(Page 59)
<Panel Color>
(Page 55)
Activate or deactivate the
display demonstration.
Select the text language
used for on-screen
information.
• Set <GUI Language>
to display the operation
buttons and menu items
in the selected language
([Local]) or English
([English]).
Select [ON] when
connecting the rear view
camera.
Select the color of the
buttons on the monitor
panel.
• Press [K] repeatedly to change the page on
the <System> menu screen.
2
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.
4
DDX_6902S.indb 4
2015/07/24 14:07
INITIAL SETTINGS
Clock settings
1 Display the <TOP MENU> screen.
On the source control screen:
4 Set date (1), time (2), then confirm the
setting (3).
• Adjust the date/time by pressing [J]/[K].
2 Display the <Setup> screen.
5 Finish the procedure.
3 Display the <Clock> screen.
ENGLISH
DDX_6902S.indb 5
5
2015/07/24 14:07
BASICS
Component names and functions
V Caution on the volume setting:
Digital devices produce very little noise compared
with other sources. Lower the volume before
playing these digital sources to avoid damaging
the speakers by sudden increase of the output
level.
1 Reset button/Power indicator/Security indicator
• Resets the unit. (Page 3)
• Lights up while the unit is turned on.
• Flashes when the security function is activated.
(Page 4)
2 M (Eject) button
Ejects the disc.
3 Loading slot
4 B MENU button
• Displays the <TOP MENU> screen. (Press)
(Page 8)
• Turns on the power. (Press) (See the right
column.)
• Turns off the power. (Hold) (See the right
column.)
5 AV/AV OUT button
• Displays the current source screen. (Press)
• When displaying CarPlay/Apps screen: Displays
the picture adjustment menu. (Page 53)
(Press)
• The function of the button when held varies
depending on the <AV Key Long Press>
setting. (Page 60)
6 TEL/VOICE button
• Displays the phone control screen. (Press)
(Page 46)
• Activates voice dialing. (Hold) (Page 47)
7 Volume/ATT/AUDIO knob
• Attenuates the sound. (Press) (Page 7)
• Adjusts the audio volume. (Turn) (Page 7)
• The function of the button when held varies
depending on the <ATT Key Long Press>
setting. (Page 60)
8 Monitor panel*
9 Screen (touch panel)
Common operations
❏ Turning on the power
❏ Turning off the power
(Hold)
* You can change the color of the buttons on the monitor panel.
(Page 55)
6
DDX_6902S.indb 6
2015/07/24 14:07
BASICS
❏ Adjusting the volume
❏ Putting the unit in standby
To adjust the volume
You can adjust the volume for the following four
situations.
• While listening to a source (0 to 35)
• During a call (0 to 35)
• During voice guidance (0 to 35)
• While receiving Traffic Information (0 to 35)
1 Display all <TOP MENU> items.
On the <TOP MENU> screen:
2
Common screen operations
❏ Common screen descriptions
You can display other screens any time to change
the source, show the information, or change the
settings, etc.
Source control screen
Performs source playback operations.
• The operation buttons vary depending on the
selected source.
1
Turn to the right to increase, and turn to the left to
decrease.
To attenuate the sound
2
3
The ATT indicator lights up.
To cancel the attenuation: Press the same button
again.
❏ Turning off the screen
(Hold)
4
Common operation buttons:
1 Displays other operation buttons.
• Disabled when there are no other buttons.
2 Switches between the normal source control
screen and easy control screen. (Page 8)
3 Displays the <TOP MENU> screen. (Page 8)
• Pressing B MENU on the monitor panel also
displays the <TOP MENU> screen.
4 Displays/hides short-cut buttons. (Page 9)
• This operation works only when <ATT Key Long
Press> is set to [V-OFF]. (Page 60)
To turn on the screen: Press and hold the volume
knob on the monitor panel, or touch the display.
Continued on the next page...
ENGLISH
DDX_6902S.indb 7
7
2015/07/24 14:07
BASICS
Easy control screen
Pressing [ ] switches between the normal source
control screen and easy control screen.
The easy control screen allows you to control the
source easily with simple buttons.
• The displayed buttons vary depending on the
selected source.
<Setup> screen
Changes the detailed settings. (Page 58)
1
3
1
3
2
Common operating buttons:
1 Selects the menu category.
2 Displays the <TOP MENU> screen.
3 Changes the page.
4 Returns to the previous screen.
<TOP MENU> screen
Displays the source control screen and settings
screen.
• You can arrange the items to display on the <TOP
MENU> screen. (Page 56)
❏ Touch screen operations
4
4
2
1 Displays the video control menu while playing a
video.
2 Displays the source control screen while playing
a video.
1
2
3
Common operating buttons:
1 Changes the playback source. (Page 9)
2 Displays all playback sources and items.
(Page 9)
3 Displays the <Setup> screen. (See the right
column.)
• The operation buttons disappear when the
screen is touched or when no operation is
done for about 5 seconds.
3 Goes to the previous chapter/track.*
4 Goes to the next chapter/track.*
* Not available for video from an external component.
8
DDX_6902S.indb 8
2015/07/24 14:07
BASICS
Selecting the playback source
On the <TOP MENU> screen:
[PANDORA]
Switches to the Pandora broadcast.
(Page 23)
[iHeartRadio] Switches to the iHeartRADIO
broadcast. (Page 25)
[AUPEO!]
Switches to the AUPEO! application.
(Page 27)
[Bluetooth]
Plays a Bluetooth audio player.
(Page 48)
[TEL]
Displays the phone control screen.
(Page 46)
[OEM Features] Switches to the source connected
via ADS adapter. (Page 41)
[AV-IN1][AV-IN2]
Switches to an external component
connected to the AV-IN1 or iPod/
AV-IN2 input terminal. (Page 39)
* When iPhone compatible with CarPlay is connected and
<CarPlay Connection> is set to [ON] (Page 20),
[Apple CarPlay] is displayed.
• You can change the page to display more items by
pressing [J]/[K].
While displaying the source control screen or the
<Setup> screen, you can use the short-cut buttons
to go to the items on the <TOP MENU> screen
indicated below.
To display the short-cut buttons
On the source control screen:
❏ Selecting the playback source on the
<TOP MENU> screen
[DISC]
[HD Radio]
Plays a disc. (Page 10)
Switches to the HD Radio
broadcast. (Page 29)
[iPod]
Plays an iPod/iPhone. (Page 17)
[USB]
Plays files on a USB device.
(Page 15)
[SiriusXM]
Switches to the SiriusXM® radio
broadcast. (Page 32)
[APPs]/[Apple CarPlay]*
Switches to the App/Apple CarPlay
screen from the connected iPod
touch/iPhone/Android device.
(Page 20)
❏ Using short-cut buttons
On the <Setup> screen:
• You can change the items (other than [SETUP]) to
display on the <TOP MENU> screen. (Page 56)
To hide the short-cut buttons: Press [
].
ENGLISH
DDX_6902S.indb 9
9
2015/07/24 14:07
DISCS
Playing a disc
• If a disc does not have a disc menu, all tracks on
it will be played repeatedly until you change the
source or eject the disc.
• For playable disc types/file types, see page 68.
❏ Inserting a disc
Insert a disc with the label side facing up.
❏ Ejecting a disc
• When removing a disc, pull it horizontally.
• You can eject a disc when playing another AV
source.
• If the ejected disc is not removed within
60 seconds, the disc is automatically inserted
again into the loading slot to protect it from dust.
Playback operations
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 53.
❏ Indications and buttons on the source
control screen
For video playback
1
2
3
The source changes to “DISC” and playback starts.
• The IN indicator lights up while a disc is inserted.
• If “ ” appears on the screen, the unit cannot
accept the operation you have tried to do.
– In some cases, without showing “ ,”
operations will not be accepted.
• When playing back a multi-channel encoded
disc, the multi-channel signals are downmixed
to stereo.
4 5 6
Playback information
• The information displayed on the screen differs
depending on the type of disc/file being played
back.
1 Media type
2 Current playback item information (title no./
chapter no./folder no./file no./track no.)
3 Playing time
4 Playback mode (Page 13)
5 File type
6 IN indicator
10
DDX_6902S.indb 10
2015/07/24 14:07
DISCS
Operation buttons
• Available buttons on the screen and operations
differ depending on the type of disc/file being
played back.
Displays the folder/track list.
[ ]
(Page 12)
Reverse/forward search during
[O] [N]
playback.
• Selects a chapter/track. (Press)
[S] [T]
• Reverse/forward search. (Hold)
Starts/pauses playback.
[IW]
Stops playback.
[o]
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
[MODE]
Changes the settings for disc
playback on the <DISC Mode>
screen. (Page 14)
[
][
] Selects playback mode. (Page 13)
[Playlist]
Displays the Original Program/
Playlist screen.
Plays in frame-by-frame.
][
]
[
[ ][
[PBC]
]
[MENU]
Selects a folder.
Activates or deactivates the VCD PBC
(Playback Control) function.
Displays the <TOP MENU> screen.
For audio playback
1
2
3
4
5
6 7 8
Playback information
• The information displayed on the screen differs
depending on the type of disc/file being played
back.
1 Media type
2 Track/file information
• Pressing [<] scrolls the text if not all of the text
is shown.
3 Current playback item information (folder no./file
no./track no.)
4 Playback status
5 Playing time
6 Playback mode (Page 13)
7 File type
8 IN indicator
Operation buttons
• Available buttons on the screen and operations
differ depending on the type of disc/file being
played back.
Displays the easy control screen.
[
]
(Page 8)
Displays the folder/track list.
[ ]
(Page 12)
Selects a track.
[S] [T]
Reverse/forward search.
[O] [N]
Starts/pauses playback.
[IW]
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
[MODE]
Changes the settings for disc
playback on the <DISC Mode>
screen. (Page 14)
Selects a folder.
[ ][ ]
][
] Selects playback mode. (Page 13)
[
Stops playback.
[o]
[MENU]
Displays the <TOP MENU> screen.
ENGLISH
DDX_6902S.indb 11
11
2015/07/24 14:07
DISCS
❏ Selecting a folder/track on the list
❏ Video menu operations
1
You can display the video menu screen during video
playback.
• The operation buttons disappear when the screen
is touched or when no operation is done for about
5 seconds.
2 Select the folder (1), then the item in the
selected folder (2).
• Repeat the procedure until you select the
desired track.
For video playback except VCD
• You can change the page to display more
items by pressing [J]/[K].
• Press [ ] to open the folder containing the
current track.
• Press [
] to return to the root folder.
• Press [
] to return to the upper layer.
[ZOOM]
Displays the picture size selection
screen. (Page 54)
[Aspect]
Selects the aspect ratio.
(Page 54)
[PictureAdjust] Displays the picture adjustment
screen. (Page 53)
[Audio]
Selects the audio type (or channel
for DVD-VR).
[Subtitle]
Selects the subtitle type.
[Angle]
Selects the view angle.
Displays the disc menu.
[ MENU]
[T MENU]
Displays the disc menu (DVD).
[Highlight]
Switches to the direct disc menu
mode. Touch the target item to
select.
• To restore the screen, press AV
on the monitor panel.
[CUR]
Displays the menu/scene
selection screen.
• [J] [K] [H] [I]: Selects an item.
• [Enter]: Confirms the selection.
• [Return]: Returns to the
previous screen.
• Available buttons on the screen and operations
differ depending on the type of disc/file being
played back.
12
DDX_6902S.indb 12
2015/07/24 14:07
DISCS
For VCD
To select a track directly on a VCD
❏ Selecting playback mode
[
[
[ZOOM]
Displays the picture size selection
screen. (Page 54)
[Aspect]
Selects the aspect ratio.
(Page 54)
[PictureAdjust] Displays the picture adjustment
screen. (Page 53)
[Audio]
Selects the audio channel (ST:
stereo, LL: left, RR: right).
[Return]
Displays the previous screen or
menu.
[Direct]
Displays/hides the direct selection
buttons. (See the right column.)
• When you enter a wrong number, press [CLR] to
delete the last entry.
] Selects Repeat playback mode.
] Selects Random playback mode.
• Available playback modes differ depending on the
type of disc/file being played back.
• You cannot activate the repeat mode and the
random mode at the same time.
• Each time you press the button, the playback
mode changes. (The corresponding indicator
lights up.)
– Available items differ depending on the type of
disc/file being played back.
C-REP
Repeats current chapter.
T-REP
Repeats current title/program.
REP
Repeats current track.
FO-REP
Repeats all tracks of the
current folder.
FO-RDM
Randomly plays all tracks of
the current folder, then tracks
of the next folders.
RDM
Randomly plays all tracks.
To cancel Repeat/Random playback: Press the
button repeatedly until the indicator disappears.
ENGLISH
DDX_6902S.indb 13
13
2015/07/24 14:07
DISCS
Settings for disc playback
• Available items shown on the <DISC Mode>
screen differ depending on the type of disc/file
being played back.
<Angle
Mark>
<Screen
Ratio>*
❏ Setting items
<Menu
Select the initial disc menu language.
Language>* (Initial: English) (Page 70)
<Subtitle
Select the initial subtitle language
Language>* or turn subtitles off (Off). (Initial:
English) (Page 70)
<Audio
Select the initial audio language.
Language>* (Initial: Original) (Page 70)
<Dynamic
You can change the dynamic range
Range
while playing using Dolby Digital
Control>*
software.
• Wide: Select this to enjoy a
powerful sound at a low volume
level with its full dynamic range.
• Normal: Select this to reduce the
dynamic range a little.
• Dialog (Initial): Select this to
reproduce movie dialog more
clearly.
Select whether to display the angle
mark.
• ON (Initial): Select this to display
the angle mark.
• OFF: Select this to hide the angle
mark.
Select the monitor type to watch a
wide screen picture on the external
monitor.
16:9 (Initial) 4:3 LB
4:3 PS
Setting the parental lock
The parental lock cannot be set during DVD
playback.
1 Display the <Parental Pass> screen.
On the <DISC Mode> screen:
• Press [K] repeatedly to change the page on
the <DISC Mode> screen.
2 Enter the 4-digit parental pass code (1),
and press [Enter] (2).
<Parental
Level>*
<CD Read>
Set the parental level.
(See the right column.)
Select the files to play on a disc
containing music files. You cannot
change the setting when a disc is
inserted.
• 1 (Initial): Automatically
distinguishes between audio file
discs and music CDs.
• 2: Forces to play as a music CD. No
sound can be heard if an audio file
disc is played.
* You can change these settings only while playback is stopped.
• To clear the entry, press [Clear].
• To cancel setting the code, press [Cancel].
3 Adjust the parental level (<OFF>,
<Level 1> to <Level 8>).
To deactivate the parental lock: Select [OFF] for
<Parental Level>.
14
DDX_6902S.indb 14
2015/07/24 14:07
USB
Connecting a USB device
You can connect a USB mass storage class device
such as a USB memory, Digital Audio Player etc. to
the unit.
• For details about connecting USB devices, see
page 64.
• You cannot connect a computer or portable HDD
to the USB input terminal.
• For playable file types and notes on using USB
devices, see page 69.
When a USB device is connected...
The source changes to “USB” and playback starts.
• All tracks in the USB device will be played
repeatedly until you change the source.
To disconnect the USB device safely:
Press [M], then disconnect the USB device after “No
Device” appears.
Playback operations
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 53.
❏ Indications and buttons on the source
control screen
1
2
3
4
6 7
5
Playback information
• The information displayed on the screen differs
depending on the type of file being played back.
1 Track/file information
• Pressing [<] scrolls the text if not all of the text
is shown.
2 Current playback item information (folder no./file
no.)
3 Playback status
4 Playing time
5 Jacket picture (Shown while playing if the file has
tag data that includes the jacket picture)
6 Playback mode (See the right column.)
7 File type
Operation buttons
• Available buttons on the screen and operations
differ depending on the type of file being played
back.
Displays the easy control screen.
[
]
(Page 8)
Displays the list selection screen.
[ ]
(Page 16)
[S] [T] Selects a track.
[O] [N] Reverse/forward search.
Starts/pauses playback.
[IW]
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
[MODE]
Changes the picture display time
setting on the <USB Mode> screen.
(Page 16)
[ ] [ ] Selects a folder.
Selects repeat playback mode.*1 *2
]
[
• REP: Repeats the current track/file.
• FO-REP: Repeats all tracks/files
in the current folder or specified
category.
[
]
Activates random playback mode.*1 *2
• RDM:
– When selecting the track/file from
the folder, randomly plays all
tracks/files of the current folder,
then the tracks/files of the next
folder.
– When selecting the track/file from
the category, randomly plays
all tracks/files of the specified
category.
Disconnects the USB device safely.
[M]
[MENU]
Displays the <TOP MENU> screen.
*1 To cancel random or repeat mode, press the button repeatedly until
the indicator disappears.
*2 You cannot activate the repeat mode and the random mode at the
same time.
ENGLISH
DDX_6902S.indb 15
15
2015/07/24 14:07
USB
❏ Setting <Picture Display Time>
Set the interval between slides during slide-shows of
the picture files.
❏ Selecting a track in a list
1
2 Select the list.
3 Select the track.
• You can change the page to display more
items by pressing [J]/[K].
• Press [
] to return to the root folder.
• Press [
] to return to the upper layer.
• Press [ ] to open the folder containing the
current track.
• If you want to play all tracks in the folder,
press [I] on the right of the desired folder.
• On the <Category List>/<Folder List>: You
can switch the file type to list: Press [ ] to list
audio files, [
] to list video files, or [ ] to
list still picture files.
• On the <Category List>/<Link Search>: To
list the items in alphabetical order, press [A-Z],
then select the first character.
From <Link Search>:
Select the tag type (1) to display a list of
content that contains the same tag as the track/
file currently being played, then the item (2).
From <Folder List>:
Select the folder (1), then the item in the
selected folder (2).
From <Category List>:
Select the category (1), then the item in the
selected category (2).
16
DDX_6902S.indb 16
2015/07/24 14:07
iPod/iPhone
Preparation
❏ Connecting iPod/iPhone
• For details about connecting iPod/iPhone, see
page 64.
• For playable iPod/iPhone types, see page 69.
Connect your iPod/iPhone according to your
purpose or the type of iPod/iPhone.
❏ Selecting the iPod/iPhone device to
play and connection method
3 Select the connection method (1), then
press [Next] (2).
When connecting the iPod/iPhone device for
first time, the setup screen (for connection, etc.)
appears. Follow the procedure on the setup screen
to configure the settings.
1 Display the <iPod Settings> screen.
On the <TOP MENU> screen:
Wired connection
• To listen to music: Use USB Audio cable for iPod/
iPhone.
– For Lightning connector models: KCA-iP103
(optional accessory)
– For 30-pin connector models: KCA-iP102
(optional accessory)
• To watch video and listen to music (only for
30-pin connector models): Use USB Audio and
Video cable for iPod/iPhone—KCA-iP202 (optional
accessory).
– For Lightning connector models: You cannot
watch the video with KCA-iP202.
[USB + AV-IN] Select this when the iPod/
iPhone is connected using
KCA-iP202 (optional accessory).
[USB 1 Wire] Select this when the iPod/
iPhone is connected using
KCA-iP102 (optional accessory)
or KCA-iP103 (optional
accessory).
[Bluetooth]* Select this when the iPod/
iPhone is connected via
Bluetooth.
• When selecting [USB + AV-IN] or [USB 1
Wire], go to step 5.
Bluetooth connection
Pair the iPod/iPhone through Bluetooth. (Page 42)
• You cannot watch video with a Bluetooth
connection.
• If [Enter] for <iPod Setup> cannot be
selected, put the unit in standby. (Page 7)
* When <CarPlay Connection> is set to [ON] (Page 20),
these settings cannot be selected.
2
• If you do not need to change the settings,
press [OK] to exit from the setup screen.
Continued on the next page...
ENGLISH
DDX_6902S.indb 17
17
2015/07/24 14:07
iPod/iPhone
4 When selecting <Bluetooth> as the
connection method, the device selection
screen appears. Search for the available
iPod/iPhone devices (1), select the target
device from the list (2), then press [Next].
❏ Selecting preference settings for iPod/
iPhone playback
Playback operations
When the source is “iPod”...
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 53.
1
2
❏ Indications and buttons on the source
control screen
1 2
• You can change the page to display more
items by pressing [J]/[K].
• If the device is already listed, skip step 1.
• To stop searching, press [Cancel].
5 Confirm the settings.
3
4
5
<Audiobooks> Select the speed of audio
books.
<Wide
• [ON]: Select this to display
Screen>*
video compatible with
wide-screen display in widescreen.
• [OFF]: Select this to
deactivate.
* You cannot change the setting when iPod/iPhone is connected.
6
Playback information
1 Song/video information
• Pressing [<] scrolls the text if not all of the text
is shown.
2 Track no./Total track number
3 Playback status
4 Playing time
5 Artwork (Shown if the song contains artwork)
6 Playback mode (Page 19)
18
DDX_6902S.indb 18
2015/07/24 14:07
iPod/iPhone
Operation buttons
Displays the easy control screen.
[
]
(Page 8)
Displays the audio/video file list. (See
[ ]
the right column.)
Selects an audio/video file.
[S] [T]
Reverse/forward search.
[O] [N]
Starts/pauses playback.
[IW]
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
[MODE]
Changes the settings for iPod/iPhone
playback on the <iPod Mode>
screen. (Page 18)
Selects repeat playback mode.
[
]
1: Functions the same as
•
Repeat One.
•
All: Functions the same as
Repeat All.
•
: Cancels the repeat mode.
]
Selects random playback mode.*
[
•
: Functions the same as Shuffle
Songs.
•
Album: Functions the same as
Shuffle Albums.
[MENU]
Displays the <TOP MENU> screen.
❏ Selecting an audio/video file from the
menu
Video menu:
1
2 Select the menu ( : audio or
: video)
(1), a category (2), then a desired item
(3).
• Select an item in each layer until you reach
and select the desired file.
• You can change the page to display more
items by pressing [J]/[K].
• Press [All E] to play all songs/videos.
• Press [A-Z] to sort the list in alphabetical
order.
• Press [
] to return to the top layer.
• Press [
] to return to the upper layer.
• Available categories differ depending on the type
of your iPod/iPhone.
Audio menu:
* To cancel random mode, press the button repeatedly until the
indicator disappears.
ENGLISH
DDX_6902S.indb 19
19
2015/07/24 14:07
APPS
You can use an App of the connected iPod touch/
iPhone/Android on this unit.
• You can use an App on the following sources:
– When iPhone compatible with CarPlay is
connected: “Apple CarPlay” (see below) or
“APPs” (Page 21)
– When a device other than above is connected:
“APPs” (Page 21)
Using Apps of iPhone—Apple
CarPlay
❏ About CarPlay
CarPlay is a smarter, safer way to use your iPhone
in the car. CarPlay takes the things you want to do
with iPhone while driving and displays them on the
screen of the product. You can get directions, make
calls, send and receive messages, and listen to the
music from iPhone while driving. You can also use
Siri voice control to make it easier to operate iPhone.
• For details about CarPlay, visit <https://ssl.apple.
com/ios/carplay/>.
❏ Preparation
To use the navigation function of the maps App,
connect the GPS antenna. (Page 65)
1 Select the device to use and connection
method on the <APP Setup> screen.
(Page 50)
• Select [iPod/iPhone] as the device type.
• Select [USB 1 Wire] as the connection
method.
3 Connect iPhone via USB input terminal.
(Page 64)
• When iPhone compatible with CarPlay is
connected to the USB input terminal, the
Bluetooth mobile phone currently connected
is disconnected.
• Unlock your iPhone.
4 Select “Apple CarPlay” as the source.
• Press [K] to change the page on the <TOP
MENU> screen.
2 Select [ON] for <CarPlay Connection> on
the <System> menu screen.
• [Apple CarPlay] is displayed only when a
compatible iPhone is connected.
Compatible iPhone devices
You can use CarPlay with the following iPhone
models.
• iPhone 5
• iPhone 5C
• iPhone 5S
• iPhone 6
• iPhone 6 Plus
20
DDX_6902S.indb 20
2015/07/24 14:07
APPS
❏ Operation buttons and available Apps
on the home screen of CarPlay
You can use the Apps of the connected iPhone.
• The items displayed and the language used on the
screen differ among the connected devices.
❏ Using Siri
You can activate Siri while the CarPlay screen is
displayed.
On the home screen of CarPlay:
1 Touch and hold [
] to activate Siri.
Using an App—APPs
For Apps you can use on this unit, visit
<http://www.kenwood.com/cs/ce/>.
• “APPs” is not available for iPod touch/iPhone
Lightning connector models.
❏ Preparation
1
1 Connect the iPod touch/iPhone/Android.
• For Android: Connect the Android device via
Bluetooth. (Page 42)
• For iPod touch/iPhone: Connect iPod touch/
iPhone with KCA-iP202 (Page 64 ).
3
2
1 Application buttons
Starts the application.
2 [ ] button
• On the App screen: Displays the home screen
of CarPlay. (Press)
• On the home screen of CarPlay: Activates Siri.
(Hold) (See the right column.)
3 [Main Menu] button
Exits the CarPlay screen and displays the
<Home> screen.
To exit the CarPlay screen: Press B MENU on the
monitor panel.
(Hold)
2 Talk to Siri.
• You can also activate Siri by pressing and holding
TEL on the monitor panel.
– To deactivate, press TEL on the monitor panel.
2 Select the iPod touch/iPhone/Android
device to use and connection method on
the <APP Settings> screen. (Page 50)
• When connecting the device for the first time,
the setup screen (for connection, etc.) appears.
Follow the procedure on the setup screen to
configure the settings.
• When iPhone compatible with CarPlay is
connected (Page 20) to use “APPs”, set
<CarPlay Connection> to [OFF]. (Page 60)
ENGLISH
DDX_6902S.indb 21
21
2015/07/24 14:07
APPS
❏ Playback operations
When the operation buttons are not displayed on
the screen, touch the screen to show them.
• To change settings for video playback, see page
53.
❏ Operation buttons on the source
control screen
1 Start the App on your iPod/iPhone/
Android.
2 Select “APPs” as the source.
• Press [K] to change the page on the <TOP
MENU> screen.
[I]
[W]
[S] [T]
[O] [N]
[IW]
[MENU]
Starts playback.
Pauses playback.
Selects an audio/video file.
Reverse/forward search.
Starts/pauses playback.
Displays the <TOP MENU> screen.
• You can operate some functions of the App on the
touch panel.
• For some applications such as navigation
applications, the operation buttons and
information are not shown. You can perform the
operations on the touch panel, such as scrolling
the map.
– If “ ” appears on the screen, the unit cannot
accept the touch operation you have tried to do.
• You can also play back the audio/video using
iPod/iPhone/Android itself instead of the unit.
❏ Switching to the App screen while
listening to another source
(Hold)
• This operation works only when <AV Key Long
Press> is set to [APPs]. (Page 60)
To return to the source control screen: Press the
same button again.
22
DDX_6902S.indb 22
2015/07/24 14:07
Pandora®
You can stream Pandora from iPod touch/iPhone,
Android or BlackBerry devices.
• Install the latest version of the Pandora
application on your iPod touch/iPhone/Android/
BlackBerry.
Preparation
Connect the device, then start the Pandora
application.
Playback operations
You can operate Pandora using the remote
controller (optional accessory). Only playing,
pausing, and skipping are available.
❏ Indications and buttons on the source
control screen
1
2
3
4
1 Connect the device.
• For Android/BlackBerry: Pair the Android/
BlackBerry device through Bluetooth.
(Page 42)
• For iPod touch/iPhone: Connect iPod touch/
iPhone. (Page 17)
2 Select the device to use and connection
method on the <APP Settings> screen.
(Page 50)
3 Select “PANDORA” as the source.
On the <TOP MENU> screen:
Playback information
1 Picture data
2 Track information
• Pressing [<] scrolls the text if not all of the text
is shown.
3 Playback status
4 Playing time
Operation buttons
Displays the easy control screen.
[
]
(Page 8)
Displays the list selection screen.
[ ]
(Page 24)
Thumbs down to the current track
[ ]
and skips to the next track.
Registers the current track as a
[ ]
favorite.
Starts/pauses playback.
[IW]
Skips the current track.
[T]
• Not available when the Pandora
skip reaches its limit.
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
Bookmarks the artist.
]
[
Bookmarks the current track.
]
[
Adds the current artist to the Station
]
[
List.
Adds the current track to the Station
[
]
List.
[MENU]
Displays the <TOP MENU> screen.
The Pandora application is started.
ENGLISH
DDX_6902S.indb 23
23
2015/07/24 14:07
Pandora®
❏ Selecting a station from the list
1 Display the list selection screen.
2 Select the list type.
<Station List>
<Genre List>
3
Selects from the station
names (Station List).
Selects from the genre names
(Genre List).
Select a station from the list.
On the Station List
[Shuffle]
Plays all the songs in the registered
stations randomly.
[By Date] Sorts the list in reverse
chronological order.
[By Name] Sorts the list in alphabetical order.
• You can change the page to display more
items by pressing [J]/[K].
indicator appears on the left of the
• The
item when Shuffle is activated. (All songs on
the registered stations are played randomly.)
• The
indicator appears on the right of the
item when the station is shared.
On the Genre List
Select a genre (1), then a station (2).
• You can change the page to display more
items by pressing [J]/[K].
• The selected station is added to the Station
List.
Requirements for Pandora®
iPhone or iPod touch
• Install the latest version of the Pandora application
on your iPhone or iPod touch. (Search for
“Pandora” in the Apple iTunes App Store to find
and install the most recent version.)
• Connect iPod touch/iPhone to this unit with a
cable or via Bluetooth.
– When connecting with a cable: Use KCA-iP202,
KCA-iP102 or KCA-iP103 (optional accessory).
– When connecting via Bluetooth, the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
Android™
• Visit Google Play™ and search for “Pandora” to
install.
• Bluetooth must be built in and the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
BlackBerry®
• Visit www.pandora.com from the built in browser
to download the Pandora application.
• Bluetooth must be built in and the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
NOTE
• Ensure you are logged in to your smartphone
application. If you do not have a Pandora account,
you can create one for free from your smartphone
or at www.pandora.com.
• Pandora is only available in certain countries.
Please visit http://www.pandora.com/legal for
more information.
• Because Pandora is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of Pandora cannot be operated
from this unit.
• For issues using the application, contact Pandora
at pandora-support@pandora.com
• Establish an Internet connection using LTE, 3G,
EDGE, or WiFi.
24
DDX_6902S.indb 24
2015/07/24 14:07
iHeartRADIO
iHeartRADIO is a free, all-in-one digital radio service
that lets you listen to your favorite Live Stations or
create commercial-free, all-music Custom Stations
featuring songs from the artists you select and
similar music.
You can stream iHeartRADIO from iPod touch/
iPhone or Android devices.
• Install the latest version of the iHeartRADIO
application on your iPod touch/iPhone/Android.
Preparation
Connect the device, then start the iHeartRADIO
application.
Playback operations
You can operate iHeartRADIO using the remote
controller (optional accessory). Only playing,
pausing, and skipping are available.
❏ Indications and buttons on the source
control screen
Live station screen:
2
1
3
1 Connect the device.
• For Android: Pair the Android device through
Bluetooth. (Page 42)
• For iPod touch/iPhone: Connect iPod touch/
iPhone. (Page 17)
Custom station screen:
2 Select the device to use and connection
method on the <APP Settings> screen.
(Page 50)
3 Select “iHeartRADIO” as the source.
2
Operation buttons
Displays the easy control screen.
[
]
(Page 8)
Displays the <Station Search> screen or
[ ]
the station list. (Page 26)
Thumbs down to the current track and
[ ]
skips to the next track.
Registers the current track as a favorite.
[ ]
Adds the current track to the <My
[ ]
Stations> list.
Saves the current station to the <My
[ ]*1
Stations> list.
[SCAN]*1 Scans stations randomly.
Displays the variety level selection
[ ]*2
screen. (Page 26)
Skips the current track.
[T]*2
Starts/pauses playback.
[IW]
[MENU] Displays the <TOP MENU> screen.
*1 Appears only for the live station screen.
*2 Appears only for the custom station screen.
1
3
On the <TOP MENU> screen:
iHeartRADIO application is started.
Playback information
1 Picture data
2 Playback status
3 Track information
• Pressing [<] scrolls the text if not all of the text
is shown.
ENGLISH
DDX_6902S.indb 25
25
2015/07/24 14:07
iHeartRADIO
❏ Selecting the variety level for your
custom station
You can adjust the amount of lesser-known music
that gets pushed into your custom station.
1 Display the variety level selection screen.
On the custom station screen:
• Press [ ] to return to the top layer.
• Press [ ] to return to the upper layer.
Search> screen. (See the left column.)
2 Display the <Station Edit> screen.
• Connect iPod touch/iPhone to this unit with a
cable or via Bluetooth. When connecting with a
cable: Use KCA-iP202, KCA-iP102 or KCA-iP103
(optional accessory).
– When connecting via Bluetooth, the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
3 Select stations (1), then press [ ] to
Android™
• Visit Google Play™ and search for “iHeartRADIO for
Auto” to install.
• Bluetooth must be built in and the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
❏ Editing the <My Stations> list
1 Select <My Stations> on the <Station
2 Select the variety level.
delete the selected stations (2).
<Familiar>
Distributes well-known
tracks.
<Mixed>
Distributes a mix of the
artists and track names.
<Less Familiar> Distributes a wide variety
of tracks including lesserknown ones.
❏ Searching for a station
1 Display the <Station Search> screen.
2 Select a station.
• Press [ ] to return to the top layer.
• Press [ ] to return to the upper layer.
Requirements for iHeartRADIO
iPhone or iPod touch
• Install the latest version of the iHeartRADIO
application on your iPhone or iPod touch. (Search
for “iHeartRADIO for Auto” in the Apple iTunes
App Store to find and install the most recent
version.)
NOTE
• Ensure you are logged in to your smartphone
application. If you do not have an iHeartRADIO
account, you can create one for free from your
smartphone or at http://www.iheart.com/.
• Because iHeartRADIO is a third-party service,
the specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of iHeartRADIO cannot be
operated from this unit.
• For issues using the application, contact
iHeartRADIO at http://www.iheart.com/.
• Establish an Internet connection using LTE, 3G,
EDGE, or WiFi.
26
DDX_6902S.indb 26
2015/07/24 14:07
AUPEO!
AUPEO! Personal Radio plays free music you really
like. You can develop your own personalized
Internet radio by rating or skipping tracks.
You can stream AUPEO! from connected iPod
touch/iPhone or Android devices.
• Install the latest version of the AUPEO!
application on your iPod touch/iPhone/Android
and create an account.
Playback operations
You can operate AUPEO! using the remote
controller (optional accessory). Only playing,
pausing, and skipping are available.
❏ Indications and buttons on the source
control screen
1
2
3
Preparation
Connect the device, then start the AUPEO!
application.
Operation buttons
Displays the easy control screen.
[
]
(Page 8)
Displays the <Station Search>
[ ]
screen. (Page 28)
“Loves” and registers the current
[ ]
track as a favorite.
Starts/pauses playback.
[IW]
Skips the current track.
[T]
“Bans” the current track and skips to
[ ]
the next track.
[MENU]
Displays the <TOP MENU> screen.
1 Connect the device.
• For Android: Pair the Android device through
Bluetooth. (Page 42)
• For iPod touch/iPhone: Connect iPod touch/
iPhone. (Page 17)
2 Select the device to use and connection
method on the <APP Settings> screen.
(Page 50)
3 Select “AUPEO!” as the source.
On the <TOP MENU> screen:
Playback information
1 Picture data
2 Track information
• Pressing [<] scrolls the text if not all of the text
is shown.
3 Playback status
The AUPEO! application is started.
ENGLISH
DDX_6902S.indb 27
27
2015/07/24 14:07
AUPEO!
❏ Selecting a station
1 Display the <Station Search> screen.
2 Select the category, then the station.
• To return to the previous layer, press [ ] .
Requirements for AUPEO!
iPhone or iPod touch
• Install the latest version of the AUPEO! application
on your iPhone or iPod touch. (Search for
“AUPEO!” in the Apple iTunes App Store to find
and install the most recent version.)
• Connect iPod touch/iPhone to this unit with a
cable or via Bluetooth.
– When connecting with a cable: Use KCA-iP202,
KCA-iP102 or KCA-iP103 (optional accessory).
– When connecting via Bluetooth, the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
Android™
• Visit Google Play™ and search for “AUPEO!” to
install.
• Bluetooth must be built in and the following
profiles must be supported.
– SPP (Serial Port Profile)
– A2DP (Advanced Audio Distribution Profile)
NOTE
• Ensure you are logged in to your smartphone
application. If you do not have an AUPEO! account,
you can create one for free from your smartphone
or at www.aupeo.com.
• Because AUPEO! is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of AUPEO! cannot be operated
from this unit.
• For issues using the application, contact AUPEO! at
www.aupeo.com.
• Establish an Internet connection using LTE, 3G,
EDGE, or WiFi.
28
DDX_6902S.indb 28
2015/07/24 14:07
HD Radio™ tuner
About HD Radio™ Technology
Listening to the HD Radio™
broadcast
❏ Indications and buttons on the source
control screen
1
• Adjacent to traditional main stations are HD2/HD3
Channels, providing new original formats on the
FM dial
• HD Radio broadcasts deliver crystal clear, CD-like
digital audio quality to consumers
• Program Info provides song name, artist, station
ID, and other relevant data
2
3
8 Seek mode
9 TI indicator
p HD indicator: Lights up when receiving an HD
Radio broadcast.
q MC indicator: Lights up when receiving an HD
Radio multicast channel.
w HD Radio reception mode (Page 30)
• When digital signals are emitted, the DIGITAL
indicator lights up.
• When analog signals are emitted, the ANALOG
indicator lights up.
4 5 6 7 89p qw
HD Radio reception information
1 Band
2 Preset no.
3 Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
• Pressing [PTY] switches the information
between PTY cord, Radio Text, Message and
Station Name.
4 Channel no.
5 Picture or station logo if available
6 The station frequency currently tuned in
7 ST indicator: Lights up when receiving an FM
stereo broadcast with sufficient signal strength.
• Visual images, such as album art of over-the-air
broadcasts from HD Radio stations
Continued on the next page...
ENGLISH
DDX_6902S.indb 29
29
2015/07/24 14:07
HD Radio™ tuner
Operation buttons
Displays the easy control screen.
[
]
(Page 8)
[AM]
Selects the AM band.
[FM]
Selects the FM band.
❏ Changing the display information
2 Press [H] [I] to change the mode.
<Auto>
Searches for a station.
• The search method differs according to
the selected seek mode. (See below.)
[CHK] Selects a sub-channel when receiving an
[CHJ] HD Radio multicast channel.
Displays other operation buttons.
[ ]
• Disabled when there are no other
buttons.
[MODE] Changes the settings for HD Radio tuner
reception on the <Mode> screen. (See the
right column.)
[TI]*
Activates/deactivates TI standby reception
mode. (See the far right column.)
[AME ] Presets stations automatically. (Hold)
(Page 31)
[SEEK] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANU: Manual Search
[
]
Displays/hides the information of the
current station. (See the right column.)
[PTY]* Enters PTY search mode. (Page 31)
Displays the <Preset List> screen.
[ ]
(Page 31)
[MENU] Displays the <TOP MENU> screen.
Switch between digital and analog
audio automatically.
<Digital> Select this to tune to digital audio
only.
<Analog> Select this to tune to analog audio
only.
[S]
[T]
* Appears only when FM is selected as the source.
❏ Activating/deactivating TI Standby
Reception
The preset list containing the station names is
displayed.
• Press [
] again to display the text information
for the station currently being received.
❏ Changing the HD Radio reception mode
While receiving an HD Radio broadcast, the unit
tunes to digital or analog audio automatically
according to the receiving condition.
1
The unit is in standby to switch to Traffic Information
(TI) if available. (The TI indicator lights up in white.)
• If the TI indicator is lit in orange, tune into another
station.
To deactivate TI Standby Reception: Press [TI].
(The TI indicator turns off.)
• The volume adjustment for Traffic Information is
automatically memorized. The next time the unit
switches to Traffic Information, the volume is set
to the previous level.
30
DDX_6902S.indb 30
2015/07/24 14:07
HD Radio™ tuner
❏ Searching for FM HD Radio programs—
PTY Search
❏ Selecting a preset station from the list
Presetting stations
❏ Storing stations in the memory
You can search for your favorite programs being
broadcast by selecting the PTY code.
You can preset 6 stations for each band.
1
Automatic presetting—AME (Auto Memory)
1
(Hold)
Local stations with the strongest signals are found
and stored automatically.
2 Select a PTY code.
2 Select a station from the list.
Manual presetting
1 Tune in to a station you want to preset.
(Page 30)
2 Select a preset number.
(Hold)
• You can change the page to display more
items by pressing [J]/[K].
PTY Search starts.
If there is a station broadcasting a program of
the same PTY code as you have selected, that
station is tuned in.
(Hold)
The station selected in step 1 is stored.
ENGLISH
DDX_6902S.indb 31
31
2015/07/24 14:07
SiriusXM® Satellite Radio
Only SiriusXM® brings you more of what you love
to listen to, all in one place. Get over 140 channels,
including commercial-free music plus the best
sports, news, talk, comedy and entertainment.
Welcome to the world of satellite radio. A SiriusXM
Vehicle Tuner and Subscription are required. For
more information, visit www.siriusxm.com.
3 When the following screen appears, press
[Return].
Listening to the SiriusXM® Satellite
Radio
❏ Indications and buttons on the source
control screen
1
2
3
Activating your subscription
1 Check your Radio ID.
The SiriusXM Satellite Radio ID is required
for activation and can be found by tuning to
Channel 0 as well as on the label found on the
SiriusXM Connect tuner and its packaging.
• The Radio ID does not include the letters I, O,
S or F.
2 Activate the SiriusXM Connect Vehicle
Tuner using one of the two methods
below:
• For users in the U.S.A:
– Online:
Visit www.siriusxm.com/activatenow
– Phone: Call SiriusXM Listener Care at
1-866-635-2349
• For users in Canada:
– Online:
Visit www.siriusxm.ca/activatexm
– Phone: Call XM customer Care at
1-877-438-9677
4
5
6
7
8
SiriusXM® Satellite Radio reception information
1 Band
2 Preset number
3 Information for the recorded data and the replay
mode (Page 34)
4 Channel Logo/Album art
5 Channel number
6 Seek mode
7 Signal strength indicator
8 Text information
• Pressing [<] scrolls the text if not all of the text
is shown.
32
DDX_6902S.indb 32
2015/07/24 14:07
SiriusXM® Satellite Radio
Operation buttons
[Song Title]/ Changes the displayed information
[Info]/
each time this button is pressed.
[Category]/
[Channel
Description]
Displays the easy control screen.
[
]
(Page 8)
Obtain information on channels
[ ]
or select a category and then a
channel. (Page 34)
[SEEK]
Changes the seek mode.
• SEEK1: Skip to another available
channel.
• SEEK2: Skip to another preset
channel.
[CHK]/[CHJ] Selects the channel.
[BAND]
Selects the band.
[IW]
[
]
[MODE]
Registers the artist of the
current song as an alert content.
(Page 36)
Registers the current song as an
[
]
alert content. (Page 36)
Activates/deactivates the content
]
[
alert for traffic and weather
information. (Page 37)
[
]
Displays the preset list. (See below.)
Used while replaying content.
[S]/[T]/
[SCAN]/[Live] (Page 35)
[MENU]
Displays the <TOP MENU> screen.
[
]
❏ Storing channels in the memory
You can preset 6 channels for each band.
1 Tune in to a channel you want to preset.
(See the far left column.)
2 Display the preset list. (See the left
column.)
3 Select a preset number.
(Hold)
Presetting channels
❏ Displaying the preset list
The channel selected in step 1 is stored.
❏ Selecting a preset channel
Starts/pauses the content replay.
(Page 35)
Displays other operation buttons.
• Disabled when there are no other
buttons.
Changes the settings for SiriusXM
Satellite Radio reception on
the <SiriusXM Mode> screen.
(Pages 35–38)
1 Display the preset list. (See the left
column.)
2 Select the preset number for the channel
you want.
• Pressing [
] again displays the text information
for the channel currently being received.
ENGLISH
DDX_6902S.indb 33
33
2015/07/24 14:07
SiriusXM® Satellite Radio
Selecting a channel
❏ Selecting a channel on the list
You can obtain information on channels or select a
category and then a channel.
3 Select a channel.
On the <Preset List> screen
Select a band (1), and then select a preset
channel (2).
1 Display the <List Type Select> screen.
❏ Indications on the source control
screen
2 Select the list type.
On the <Channel List> screen
Select a category (1), and then select a channel
(2).
<Preset List>
Selects from the preset list.
• To preset the channels, see
page 33.
<Channel List> Selects from the channel
names.
Replay
You can pause, rewind and replay content from the
currently tuned channel.
• The SiriusXM Connect Vehicle Tuner continually
buffers up to 60 minutes of audio.
• If you change to another channel during playback,
the Replay buffer content will be lost.
• You can change the page to display more
items by pressing [J]/[K].
• To list all the channels, select [All Channels].
• Pressing the info change button above the list
displays information in the following order:
Channel Name, Artist Name, Song Title,
Content Info
1
2 3
1 Playback status
2 Progress bar
Shows the remaining capacity (gray) and the
amount of buffered content (blue). If the Replay
buffer is full, the entire bar becomes blue.
• Updated every second.
3 Time code
Shows you the point in the Replay buffer you are
listening to.
• Example: –5:00
– You are listening to audio that is 5 minutes
behind the current broadcast.
• Updated every second.
34
DDX_6902S.indb 34
2015/07/24 14:08
SiriusXM® Satellite Radio
❏ Replaying content
1 Display operations buttons for replay.
2
• To start/pause the playback, press [IW].
• To skip the current track segment, press [S]/
[T].
– Pressing [S] within 2 seconds of the
beginning of the current track/segment returns
to the previous track.
– Pressing [S] after 2 seconds or more of
the track has been replayed returns to the
beginning of the current track/segment.
• To rewind/fast forward, press and hold [S]/
[T].
• To return to the live position, press [Live].
SmartFavorites
User stored channels (P1 to P6) are recognized as
SmartFavorites channels. The SiriusXM Connect
Vehicle Tuner automatically buffers their broadcast
content in the background. When you select a
SmartFavorite channel, you can rewind and replay
up to 30 minutes of any of the missed news, talk,
sports or music content.
• SmartFavorites is available only when you connect
an SXV200 or later SiriusXM Connect Vehicle
Tuner.
• If you change to another band, the buffered
content is cleared and new channels in the current
band will start buffering.
TuneScan™
When you activate TuneScan™, you will hear 6
seconds of the songs, which have not been listened
to, from each of the music channel presets on the
current Band.
TuneStart™
When you select a preset channel, you can listen to
the current song from the beginning.
Activating TuneStart™
1
The unit starts scanning.
• To select the previous/next content, press [S]
or [T].
• To end scanning and continue listening to the
current song/content, press [SCAN].
• To exit scanning, press and hold [SCAN].
2
To deactivate TuneStart: Select [OFF] for
<TuneStart>.
ENGLISH
DDX_6902S.indb 35
35
2015/07/24 14:08
SiriusXM® Satellite Radio
Receiving alerts for desired content
— Content Alert
3 Select the league (1) and the team (2)
The checkmark appears besides the selected
item.
then register the content alert (3).
• To show the details of the item, press [<].
• To delete the registered items, press and hold
the item you want to delete (1). ([ ] and a
checkmark are shown beside the selected item.)
Then, press [ ] (2).
The unit informs you when receiving the content
you are interested in such as music, information
about a sports team or weather and traffic
information.
❏ Registering content alerts
For artists/songs
(Hold)
[
]
[
]
Registers the artist of the current
song.
Registers the current song.
❏ Selecting the content for the content
alert
(Hold)
For artists/songs/sports teams
1
• To delete all registered items, press and hold [All
Clear ] for <Content Alerts Contents Set>.
For sports teams
1
• Press [K] repeatedly to change the page on
the <SiriusXM Mode> screen.
For traffic and weather information
1
2
• Press [K] repeatedly to change the page on
the <SiriusXM Mode> screen.
• Press [K] repeatedly to change the page on
the <SiriusXM Mode> screen.
2
2 Select the city for which you want to
3 Select the category (1), then the item (2).
receive traffic and weather information.
36
DDX_6902S.indb 36
2015/07/24 14:08
SiriusXM® Satellite Radio
❏ Activating content alerts
Setting reception restrictions
For artists/songs/sports teams
3 Enter a new four-digit code (1), and then
confirm (2).
❏ Setting the parental control
1
You can limit access to SiriusXM channels, such as
those with mature content.
• Press [K] repeatedly to change the page on
the <SiriusXM Mode> screen.
2
Setting/Changing the parental code
• The initial setting is “0000.”
• Changing the code does not change the
<Parental Control>/<Parental Lock Channel
Selection> settings.
1 Display the <Parental Code Check>
• To deactivate content alerts: Select [OFF] for
<Content Alerts>.
• To clear the entry, press [Clear].
• To cancel setting the code, press [Cancel].
4 Enter the four-digit code and then press
[Enter] again to confirm the code.
screen.
Activating/Deactivating the parental control
You can set the parental control feature to lock
any SiriusXM channel(s) or automatically lock all
channels classified as “mature” by SiriusXM®.
For traffic and weather information
1
• To deactivate the content alert : press [
again.
]
❏ Switching registered content
When receiving the contents registered for content
alerts, an alert appears on the screen. Press [Jump],
then select the item to jump on the <Content
Alerts> screen.
• To show the details of the item, press [<].
2 Enter a four-digit code (1), and then
2
confirm (2).
[OFF]
• To clear the entry, press [Clear].
• To cancel setting the code, press [Cancel].
Deactivates the parental mature and
user lock.
[Mature] Locks channels classified as “mature”
only.
[User]
Locks only the selected channels.
3 Enter the parental code to confirm your
choice.
Continued on the next page...
ENGLISH
DDX_6902S.indb 37
37
2015/07/24 14:08
SiriusXM® Satellite Radio
Selecting the channels to lock—Parental Lock
Channel
This parental control option allows you to pick
the channels to be locked by the parental control
feature.
• When <Parental Control> is set to [Mature] or
[OFF], you cannot change the <Parental Lock
Channel Selection> setting.
1
Repeat this step if you want to set the lock on
multiple channels.
• You can change the page to display more
items by pressing [J]/[K].
• To list all the channels, select [All Channels].
• A check mark appears beside the selected
channel.
To deactivate the parental lock for all locked
channels: Select [All Clear] for <Parental Lock
Channel Selection> on the <SiriusXM Mode>
screen, then enter the parental code number.
❏ Skipping unwanted channels
If you do not want to receive some channels, you
can skip them.
Activating the channel skipping
1
Repeat this step if you want to skip multiple
channels.
To clear the channel skipping for all skipped
channels: Press and hold [All Clear] in <Skip
Channel Selection> on the <SiriusXM Mode>
screen.
❏ Resetting the SiriusXM Satellite Radio
settings
You can reset the SiriusXM Satellite Radio settings
you set up and restore the default settings.
1
2 Enter the parental code.
3 Select a category (1), and then a channel
• Press [K] repeatedly to change the page on
the <SiriusXM Mode> screen.
(2).
2
2 Select a category (1), and then select a
channel (2).
• You can change the page to display more
items by pressing [J]/[K].
• To list all the channels, select [All Channels].
• A check mark appears beside the selected
channel.
(Hold)
38
DDX_6902S.indb 38
2015/07/24 14:08
OTHER EXTERNAL COMPONENTS
Using external audio/video
players—AV-IN
When the operation buttons are
not displayed on the screen, touch
the area shown on the illustration.
• To change settings for video
playback, see page 53.
You can connect an external component to the
AV-IN1 and iPod/AV-IN2 input terminals. (Page 64)
❏ Starting playback
1 Connect an external component to the
AV-IN1 or iPod/AV-IN2 input terminal.
(Page 64)
2 Select “AV-IN1” or “AV-IN2” as the
source.
• Press [K] to change the page on the <TOP
MENU> screen.
Using a rear view camera
• To connect a rear view camera, see page 64.
• To use a rear view camera, a REVERSE lead
connection is required. (Pages 63)
❏ Activating the rear view camera
1 Display the <Input> setting screen.
On the <TOP MENU> screen:
❏ Indications and buttons on the source
control screen
AV-IN name
3 Turn on the connected component and
2
start playing the source.
Operation buttons
[MODE]
Changes the AV-IN name.
• Press [H] or [I] to select an AV-IN
name.
• This setting does not affect the
source name “AV-IN 1”/ “AV-IN 2”
displayed on the <TOP MENU>.
[MENU]
Displays the <TOP MENU> screen.
To deactivate: Select [OFF] for <R-CAM Interrupt>.
ENGLISH
DDX_6902S.indb 39
39
2015/07/24 14:08
OTHER EXTERNAL COMPONENTS
❏ Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
❏ Using the parking guidelines
2
You can display parking guidelines to enable easier
parking when you shift the gear to the reverse (R)
position.
Displaying the parking guidelines
1 Display the <Display> setting screen.
On the <TOP MENU> screen:
To deactivate: Select [OFF] for <Parking
Guidelines>.
• To erase the caution message, touch the screen.
To display the picture from the rear view camera
manually
(Hold)
• This operation works only when <ATT Key Long
Press> is set to [R-CAM]. (Page 60)
• You can change the picture settings using
[Aspect]/[PictureAdjust]. (Page 53)
• Press [K] repeatedly to change the page on
the <Display> menu screen.
To exit the rear view screen: Press and hold the
same button again.
40
DDX_6902S.indb 40
2015/07/24 14:08
OTHER EXTERNAL COMPONENTS
Adjusting the parking guidelines
Adjust the parking guidelines according to the size
of the car, parking space and so on.
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make sure
to use the parking brake to prevent the car from
moving.
3 Adjust the parking guidelines by selecting
the mark (1), then adjusting the
position of the selected mark (2).
Using an external component via
ADS adapter—OEM Features
You can control the sources from the component via
ADS adapter.
• Preparation: Configure the settings on the <OEM
Setup> screen beforehand. (Page 60)
1 Connect the ADS adapter to the iDatalink
input terminal. (Page 64)
1 Display the <Display> setting screen.
2 Select “OEM Features” as the source.
On the <TOP MENU> screen:
Make sure that A and B are horizontally
parallel, and that C and D are the same length.
• Press and hold [Initialize ] for 2 seconds
to set all the marks to the initial default
position.
(Page 9)
On the <TOP MENU> screen:
• Press [K] to change the page on the <TOP
MENU> screen.
• Press [K] repeatedly to change the page on
the <Display> menu screen.
2
3 Turn on the connected component and
start playing the source.
ENGLISH
DDX_6902S.indb 41
41
2015/07/24 14:08
BLUETOOTH
Information for using Bluetooth®
devices
Bluetooth is a short-range wireless radio
communication technology for mobile devices such
as mobile phones, portable PCs, and other devices.
Bluetooth devices can be connected without cables
and communicate with each other.
Notes
• While driving, do not perform complicated
operations such as dialing numbers, using the
phone book, etc. When you perform these
operations, stop your car in a safe place.
• Some Bluetooth devices may not connect to this
unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth
devices.
• Connecting conditions may vary depending on
your environment.
• For some Bluetooth devices, the device is
disconnected when the unit is turned off.
Connecting Bluetooth devices
❏ Registering a new Bluetooth device
When you connect a Bluetooth device to the unit for
the first time, pair the unit and the device. Pairing
allows Bluetooth devices to communicate with each
other.
• The pairing method differs depending on the
Bluetooth version of the device.
– For devices with Bluetooth 2.1: You can pair the
device and the unit using SSP (Secure Simple
Pairing) which only requires confirmation.
– For devices with Bluetooth 2.0: You need to
enter a PIN code both on the device and unit for
pairing.
• Once the connection is established, it is registered
in the unit even if you reset the unit. Up to 5
devices can be registered in total.
• Two devices for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
the Bluetooth function of the device.
• To use the registered device, you need to connect
the device to the unit. (Page 44)
Auto pairing
When <Auto Pairing> is set to [ON], iOS devices
(such as iPhone) are automatically paired when
connected via USB. (Page 49)
Pairing a Bluetooth device using SSP (for
Bluetooth 2.1)
When the Bluetooth device is compatible with
Bluetooth 2.1, a pairing request is sent from an
available device.
1 Search the unit (“DDX****”) from your
Bluetooth device.
2 Confirm the request both on the device
and the unit.
256950
OK
• Press [Cancel] to reject the request.
About mobile phones compatible with Phone
book Access Profile (PBAP)
If your mobile phone supports PBAP, you can
display the phone book and call lists on the
touch panel screen when the mobile phone is
connected.
• Phone book: up to 600 entries
• Dialed calls, received calls, and missed calls: up
to 10 entries each
42
DDX_6902S.indb 42
2015/07/24 14:08
BLUETOOTH
Pairing a Bluetooth device from the target device
using a PIN code (for Bluetooth 2.0)
1 Display the <Bluetooth Setup> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
2 Change the PIN code.
• If you wish to skip changing the PIN code, go
to step 3.
• The PIN code is initially set to “0000”.
• The maximum number of digits in the PIN
code is 15.
4 Select the unit (“DDX****”) on your
Bluetooth device.
• If a PIN code is required, enter “0000” (initial).
When pairing is complete, the device is listed on
the <Paired Device List>.
• To use the paired device, connect the device
on the <Paired Device List>. (Page 44)
• Press [Clear] to delete the last entry.
3 Search for the unit (“DDX****”) from your
Bluetooth device.
• You can also display the <Bluetooth Setup>
screen by pressing [
] on the phone control
screen. (Page 46)
Continued on the next page...
ENGLISH
DDX_6902S.indb 43
43
2015/07/24 14:08
BLUETOOTH
Pairing a Bluetooth device from this unit using a
PIN code (for Bluetooth 2.0)
1 Display the <Bluetooth Setup> screen.
3 Select the device you want to connect (1),
then press [Connection] (2).
1 Display the <Bluetooth Setup> screen.
(Page 43)
(Page 43)
2
2
3 Search for the available devices.
❏ Deleting a registered Bluetooth device
4 Select [ON] or [OFF] for the target.
3 Select a device to delete (1), then press
[Remove] (2).
• To cancel searching devices, press [Cancel].
4 Select the device you want to pair.
:
:
• If a PIN code is required, enter “0000” (initial).
❏ Connecting/disconnecting a registered
Bluetooth device
Two devices can be connected simultaneously.
1 Display the <Bluetooth Setup> screen.
(Page 43)
2
Mobile phone
Audio device
• The status is shown as follows:
– “Connected”: A connection has been
established.
– “Connect Ready”: A connection can be
established.
– “Disconnected”: No connection is
established.
• Press [Change] for <APP Setup> to display
the <APP Settings> screen to configure
settings for applications of iPod/iPhone/
Android. (Page 50)
A confirmation message appears. Press [Yes].
• When a Bluetooth mobile phone is connected,
the signal strength and battery level are displayed
when the information is acquired from the device.
44
DDX_6902S.indb 44
2015/07/24 14:08
BLUETOOTH
Using a Bluetooth mobile phone
❏ Receiving a call
When a call comes in...
• Call information is displayed if acquired.
• Phone operation is not available while the
picture from the rear view camera is displayed.
(Page 39)
To reject a call
❏ Adjusting the volume of calls/earpiece/
microphone
❏ Adjusting the echo cancel level/
reducing noise
While talking...
While talking...
• You can adjust the volume level between 0 to 15
(initial: 3).
• Turn the volume knob on the monitor panel to
adjust the call/earpiece volume. (Page 7)
• To adjust the echo volume (between −1 to +1,
initial: 0): Adjust <EC LEVEL>.
• To adjust the noise reduction volume (between
0 to −20, initial: −10) : Adjust <NR LEVEL>.
❏ Switching between handsfree mode
and phone mode
While talking...
When <Auto Response> is set to [ON] (Page 49)
The unit answers incoming calls automatically.
❏ Ending a call
While talking...
Each time you press the button, the talking
g method
is switched (
: handsfree mode /
:
phone mode).
ENGLISH
DDX_6902S.indb 45
45
2015/07/24 14:08
BLUETOOTH
❏ Sending text during a call
❏ Making a call
You can send text during a call using the DTMF (Dual
Tone Multi Frequency) function.
1 Display the phone control screen.
While talking...
• You can display the <Bluetooth Setup>
].
screen by pressing [
On the <TOP MENU> screen:
• Press [K] to change the page on the <TOP
MENU> screen.
* When the mobile phone is not compatible with Phone Book Access
Profile (PBAP), the phone book is not displayed.
From the preset list/phone book/call lists
1
• You can also display the phone control screen
by pressing TEL on the monitor panel.
2 Select a method to make a call.
1
2
3
[
From the preset list
]
]
[
From the phone book
[
]
From the missed call list
[
]
From the received call list
[
]
From the dialed call list
2 Select the target (1), then make a call (2).
❏ Switching between two connected
devices
When 2 devices are connected, you can change the
device to use.
On the phone control screen:
• The name of the active device appears. The
devices are switched each time the button is
pressed.
4
• You can show more items by pressing [J]/[K].
1 From the phone book*/call lists
2 Direct number entry
3 From the preset list
• To preset, see page 48.
4 Voice dialing
• You can change the page to display more
items by pressing [J]/[K].
46
DDX_6902S.indb 46
2015/07/24 14:08
BLUETOOTH
• To use the A to Z search in the phone book:
When the phone book list is displayed, you can
search by initial.
1
• To display other phone numbers:
When the phone book list is displayed, you can
switch between phone numbers if several phone
numbers are registered for the same person.
1 Switch the phone number.
2 Select the initial.
• If the initial character is a number, press
[1,2,3...] and then select the number.
• The phone number switches each time [>] is
pressed.
2 Select a phone number to call.
Voice dialing
• Available only when the connected mobile phone
has a voice recognition system.
1 Activate voice dialing.
On the phone control screen:
• Press [K] repeatedly to change the page on
the phone control screen.
• You can also activate voice dialing by holding
TEL on the monitor panel.
2 Say the name of the person you want to
call.
• If the unit cannot find the target, the following
screen appears. Press [Start], then say the
name again.
3 Select a phone number from the list.
Direct number entry
You can enter up to 31 numbers.
To cancel voice dialing: Press [Cancel].
• Press [
] to delete the last entry.
• Press and hold [0/+] to add “+” to the phone
number.
ENGLISH
DDX_6902S.indb 47
47
2015/07/24 14:08
BLUETOOTH
❏ Presetting phone numbers
You can preset up to 5 phone numbers.
1 Display the phone control screen.
(Page 46)
2 Enter the numbers on the direct number
entry screen, then display the preset list.
Using the Bluetooth audio player
• To register a new device, see page 42.
• To connect/disconnect a device, see page 44.
❏ Indications and buttons on the source
control screen
12
3
3 Select a preset number to store into.
4
• The operation buttons, indications and
information displayed on the screen differ
depending on the connected device.
(Hold)
• To display the preset list, press [
control screen.
Playback information
1 Playback status*
2 Playing time*
3 Tag data (current track title/artist name/album
title)*
• Pressing [<] scrolls the text if not all of the text
is shown.
4 The signal strength and battery level (only when
the information is acquired from the device)
Operation buttons
Displays the easy control screen.
[
]
(Page 8)
• Selects a track. (Press)
[S] [T]
• Reverse/forward search.* (Hold)
Starts playback.
[I]
Pauses playback.
[W]
[MENU]
Displays the <TOP MENU> screen.
* Available only for devices compatible with AVRCP 1.3.
] on the phone
48
DDX_6902S.indb 48
2015/07/24 14:08
BLUETOOTH
Settings for Bluetooth devices
You can change various settings for using Bluetooth
devices on the <Bluetooth Setup> screen.
1 Display the <Bluetooth Setup> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
• You can also display the <Bluetooth Setup>
screen by pressing [
] on the phone control
screen. (Page 46)
2 Configure the Bluetooth settings.
❏ Setting items
<Paired Device Press [Enter] to show the list
List>
of registered devices. You can
connect a device or delete
registered devices. (Page 44)
<PIN Code>
Changes the PIN code of the unit.
(Page 43)
<Device
Shows the device name to be
Name>
shown on the Bluetooth device —
DDX****.
<Device
Shows the device address of the
Address>
unit.
<Auto
• ON (Initial): A connection is
Connect>
automatically established with
the last connected Bluetooth
device when the unit is turned
on.
• OFF: Cancels.
<Bluetooth HF/ Select the speakers used for
Audio>
Bluetooth (both phone and audio
player).
• Front Only: Front speakers only.
• All (Initial): All speakers.
<Auto
• ON: The unit answers the
Response>
incoming calls automatically
after 5 seconds.
• OFF (Initial): The unit does not
answer the calls automatically.
Answer the calls manually.
<Auto Pairing> • ON (Initial): Establishes
pairing automatically with the
connected iOS device (such as
iPhone) even if the Bluetooth
function is deactivated on
the device. (Auto pairing may
not work for some devices
depending on the iOS version.)
• OFF: Cancels.
<Ring Mode>
• System (Initial): The ring tone
set on the unit is used.
• Phone: The ring tone set on
the mobile phone is used.
(This function may not work
depending on the mobile
phone.)
<Ring Tone
When <Ring Mode> is set to
Change>
<System>, select the ring tone
for received calls from [Tone1]
(Initial), [Tone2], [Tone3].
<Initialize>
Hold [Enter] to reset all settings
you have made for using
Bluetooth mobile phones and
Bluetooth audio players.
ENGLISH
DDX_6902S.indb 49
49
2015/07/24 14:08
SETTINGS
Settings for using applications of
iPod/iPhone/Android
Before using applications of iPod/iPhone/Android
such as Pandora, iHeartRADIO, or AUPEO! select
the device to use and connection method.
When connecting the device for first time, the
setup screen (for connection, etc.) appears. Follow
the procedure on the setup screen to configure
the settings.
<Bluetooth>* Select this when the iPod/
iPhone is connected via
Bluetooth.
4
t If you do not need to change the setting,
press [OK] to exit from the setup screen.
5 Select the device type (1), then press
[Next] (2).
1 Connect the device.
t For Android: Pair the Android device through
t For iPod touch/iPhone: Connect iPod touch/
2 Display the <APP Setup> screen.
On the <TOP MENU> screen:
t When selecting <USB + AV-IN> or <USB 1
Wire>, go to step 8.
7 When selecting [Android/Other] as the
device type in step 5 or <Bluetooth> as
the connection method of iPod/iPhone in
step 6, the device selection screen appears.
Search for the available iPod/iPhone/
Android devices (1), select the target
device from the list (2), then press [Next].
t When selecting [Android/Other], the
confirmation message is displayed. Press
[Next], then go to step 7.
6 When selecting [iPod/iPhone]: Select the
connection method (1), then press [Next]
(2).
t You can change the page to display more
items by pressing [J]/[K].
t If the device is already listed, skip step 1.
t To stop searching, press [Cancel].
8 Confirm the settings.
3 Display the <APP Settings> screen.
<USB +
AV-IN>
Select this when the iPod/
iPhone is connected using
KCA-iP202 (optional accessory).
<USB 1 Wire> Select this when the iPod/
iPhone is connected using KCAiP102 (optional accessory) or
KCA-iP103 (optional accessory).
* When <CarPlay Connection> is set to [ON]
these settings cannot be selected.
50
DDX_6902S.indb 50
2015/07/24 14:08
SETTINGS
Sound adjustment
❏ Using the sound equalization
• The adjustment is memorized for each source until
you adjust the sound again. If the source is a disc,
the adjustment is stored for each of the following
categories.
– DVD/DVD-VR/VCD
– CD
– MPEG1/MPEG2/MP3/WMA/AAC
• You cannot adjust the sound when the unit is in
standby.
Selecting a preset sound mode
1 Display the <Equalizer> screen.
On the <TOP MENU> screen:
• You can also display the <Equalizer> screen
by pressing and holding the volume knob
when <ATT Key Long Press> is set to [AUDIO]
(Page 60).
Storing your own adjustment—Adjusting the
sound precisely
❏ Setting the car type and speakers
1 Display the <Car Setting> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
1 Select a sound mode. (See the left column.)
2 Select a band and adjust the level of the
selected band.
• The number of bands depends on the model.
• You can adjust the level by dragging the slider
or using [J]/[K].
• Repeat this step to adjust the level of other
bands.
2 Select a car type (1), and then select the
location of the speakers (2).
The adjustments are stored and <User> is
activated.
3 Activate ([ON]) or deactivate ([OFF]) the
2 Select a sound mode.
bass (<Bass EXT>) (1), and then adjust
the subwoofer level (2).
• You can change the page to display more
items by pressing [J]/[K].
ENGLISH
DDX_6902S.indb 51
51
2015/07/24 14:08
SETTINGS
❏ Setting the speakers—speaker size and
crossover frequency
4 Adjust the crossover frequency of the
selected speaker.
1 Display the <Speaker Select> screen.
❏ Setting the listening position
You can adjust the sound effects according to your
listening position.
1 Display the <Position> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
<Gain>
2 Select the speaker type (front speakers,
rear speakers, or subwoofer).
3 Select the size of the selected speaker.
Adjusts the output volume of
the selected speaker.
<HPF FREQ> Adjusts the crossover frequency
for the front or rear speakers
(high pass filter).*1
<LPF FREQ> Adjusts the crossover for the
subwoofer (low pass filter).*2
<Slope>
Adjusts the crossover slope.
<Phase>
Selects the phase for the
subwoofer.*2
2 Select the listening position ([All],
[Front L], [Front R] or [Front All]).
*1 Appears only when the front or rear speakers are selected.
*2 Appears only when the subwoofer is selected.
52
DDX_6902S.indb 52
2015/07/24 14:08
SETTINGS
Adjusting the Digital Time Alignment (DTA)
Make fine adjustments to the delay time of
the speaker output to create a more suitable
environment for your vehicle.
1 Display the <Position> screen. (Page 52)
2 Display the <Position DTA> screen.
3 Select the speaker you want to adjust (1),
and then adjust each item (2).
Determining the value for <Position DTA>
adjustment
If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
1 Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the differences between the distance
of the furthest speaker and other speakers.
4 Set the DTA value calculated in step 3 for
individual speakers.
5 Adjust gain for individual speakers.
Adjustment for video playback
❏ Adjusting the picture
You can adjust the picture quality.
1 Display the adjustment menu.
Example: When [Front All] is selected as the
listening position
2 Select [DIM ON] (dimmer on) or [DIM OFF]
+3.5 ft
(dimmer off).
1.4 ft
2.45 ft
<Distance> Adjusts the Digital Time
Alignment (DTA) value.
<Gain>
Adjusts the output volume of
the selected speaker.
+2.45 ft
4.9 ft
+0 ft
• To determine the adjustment value, see the
right column.
• To initialize the setting value, press
[Initialize].
Continued on the next page...
ENGLISH
DDX_6902S.indb 53
53
2015/07/24 14:08
SETTINGS
3 Adjust the picture.
2 Select the aspect ratio.
❏ Zooming the picture
You can zoom the picture. Zooming is available only
when discs are played back.
1 Display the adjustment menu.
<Bright>
Adjusts the brightness. (−15
to +15)
<Contrast>
Adjusts the contrast. (−10 to
+10)
<Black>
Adjusts the blackness. (−10 to
+10)
<Color>
Adjusts the color. (−10 to +10)
<Tint>
Adjusts the tint. (−10 to +10)
<Sharpness> Adjusts the sharpness. (−2 to
+2)
❏ Changing the aspect ratio
You can change the aspect ratio for video playback.
<Full>
For 16:9 original pictures
4:3 signal
16:9 signal
<Normal>
For 4:3 original pictures
4:3 signal
16:9 signal
<Zoom>
Changes the magnification.
• The aspect ratio is
automatically selected to
match the video source.
2 Change the magnification (1), then move
the zooming frame (2).
1 Display the adjustment menu.
• The zoom function cannot be used for some video
sources.
54
DDX_6902S.indb 54
2015/07/24 14:08
SETTINGS
You can change the background and panel color.
• The number of preset backgrounds and the
designs available differ depending on the
model.
1 Display the <User Customize> screen.
To select a panel color
Changing the display design
On the <TOP MENU> screen:
*2
❏ Storing your favorite image for the
background
You can set your favorite image stored on the
connected USB device.
• Use a JPEG/PNG/BMP file with a resolution of 800
x 480 pixels.
• The color of the captured image may look
different from that of the actual scene.
1 Connect the USB device on which the
image is stored. (Page 64)
• Selecting [Scan] changes the illumination
color gradually.
*1 Store your own scene beforehand. (See the right column.)
*2 Store your own color adjustment beforehand. (See below.)
2 Display the <User Customize> screen.
(See the far left column.)
3 Display the file selection screen.
❏ Making your own color adjustment
2 Select an item to change (background
design: [Background]/panel color: [Panel
Color]).
1 Select [Panel Color] on the <User
Customize> screen. (See the left column.)
2
4 Select the folder (1), then the file for the
3 Select the dimmer setting for the color (1),
3 Select a background/panel color.
background image in the selected folder
(2).
then adjust the color (2).
To select a background
*1
• You can change the page to display more
items by pressing [J]/[K].
A confirmation message appears. Press [OK]
to store the new image. (The existing image is
replaced with the new one.)
ENGLISH
DDX_6902S.indb 55
55
2015/07/24 14:08
SETTINGS
Customizing the <TOP MENU>
screen
You can arrange the items to display on the <TOP
MENU> screen.
1 Display the <Menu Customize> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Display> menu screen.
Customizing the system settings
❏ Memorizing/recalling the settings
• You can memorize the settings changed in the
<Setup> menu and recall the memorized settings
any time.
• The memorized settings are kept even when the
unit is reset.
1 Display the <SETUP Memory> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
2 Select the position to place the icon (1),
then select the item you want to display in
the selected position (2).
2
• To cancel, press [No].
3 Select an operation.
[Recall]
Recalls the memorized settings.
[Memory] Memorizes the current settings.
[Clear]
Clears the currently memorized
settings.
• To cancel, press [Cancel].
A confirmation message appears. Press [Yes].
Repeat this step to place icons for other items.
56
DDX_6902S.indb 56
2015/07/24 14:08
SETTINGS
❏ Locking the settings
❏ Adjusting the touch position
You can lock the settings to prevent them from
being changed.
•
is shown beside the settings that can be
locked.
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1 Display the <Touch Panel Adjust> screen.
1 Display the <SETUP Memory> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
(Page 56)
2
3
To unlock the setting: Press [Unlock].
❏ Updating the system
You can update the system by connecting a USB
device containing an update file.
• To update the system, visit <http://www2.
jvckenwood.com/cs/ce/>.
1 Create an update file, copy it to a USB
device, and connect it to the unit.
• To connect a USB device, see page 64.
2 Display the <System Information>
screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
<Application
Version>
<System Version>
<Bluetooth
Version>
Updates the system
application.
Updates the system.
Updates the Bluetooth
application.
It may take a while.
If the update has been completed successfully,
“Update Completed” appears. Reset the unit.
• Do not disconnect the USB device while updating.
• If the update has failed, turn the power off and
then on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
2 Touch the center of the marks at the lower
left and at the upper right as instructed.
• To reset the touch position, press [Reset].
• To cancel the current operation, press
[Cancel].
ENGLISH
DDX_6902S.indb 57
57
2015/07/24 14:08
SETTINGS
Setting menu items
❏ Displaying the <Setup> menu screen
• You can change the page to display more items by
pressing [J]/[K].
• You cannot change the <Audio> menu items
when [STANDBY] is selected on the <TOP
MENU>. (Page 7)
❏ <Audio> setting screen
<Fader/Balance>
Fader: Adjust the front and rear speaker output
balance.
• F6 to R6 (Initial: 0)
– When using a two-speaker system, set the fader
to the center (0).
Balance: Adjust the left and right speaker output
balance.
• L6 to R6 (Initial: 0)
Press [J]/[K]/[H]/[I] or drag [ ] to adjust.
– To clear the adjustment, press [Center].
<Equalizer>
Change the sound mode or adjust and store the
equalization for each source. (Page 51)
• Natural (Initial)/Rock/Pops/Easy/Top40/Jazz/
Powerful/iPod*1/User
<Loudness>
You can activate/deactivate loudness.
• ON (Initial): Boost low and high frequencies to
produce a well-balanced sound at a low volume
level.
• OFF: Cancels.
<Volume Offset>
Adjust and store the auto-adjustment volume level
for each source. (For discs, the adjustment is stored
for each of the following categories: DVD/DVD-VR/
VCD, CD, and MPEG1/MPEG2/MP3/WMA/AAC.) The
volume level will automatically increase or decrease
when you change the source.
• –15 to +6 (Initial: 0)
<SW Level>
Adjust the subwoofer level.
• –50 to +10 (Initial: 0)
<Bass Boost>
Select your preferred bass boost level.
• OFF (Initial)/Level 1/Level 2/Level 3
<Car Setting>*2
Select a car type and speaker location. (Page 51)
• Car type: Off (Initial)/Compact/Full Size Car/
Wagon/Minivan/SUV/Minivan (Long)
• Speaker Location: Select the location of the
speakers in your car.
– Front: Door (Initial)/On Dash/Under Dash
– Rear*3: Door/ Rear Deck/2nd Row/3rd Row
<Speaker Select>*2
Select the speaker size and adjust the crossover
frequency. (Page 52)
<Position>
Adjust the sound effects according to your listening
position. (Page 52)
<DSP Select>
Select whether to use the Digital Signal Processor
(DSP) system.
• Bypass: Invalidates all the settings for the DSP.
• Through (Initial): Uses the DSP.
<Drive Equalizer>
You can reduce the driving noise by raising the
bandwidth.
• ON (Initial): Activates the Drive Equalizer.
• OFF: Cancels.
*1 Appears only when iPod is selected as the source.
*2 When an item is grayed out, you cannot change the setting. Select
[Unlock] on the <SETUP Memory> screen to change the
setting. (Page 57)
*3 The initial setting varies depending on the car type setting.
58
DDX_6902S.indb 58
2015/07/24 14:08
SETTINGS
❏ <Display> setting screen
<Dimmer>
• Auto (Initial): Dims the screen and button
illumination when you turn on the headlights.
– The ILLUMI lead connection is required.
(Page 63)
• ON: Activates dimmer.
• OFF: Cancels.
<User Customize>
Change the display design (background and panel
color). (Page 55)
<OSD Clock>
• ON: Displays the clock while a video source is
playing.
• OFF (Initial): Cancels.
<Demonstration>
• ON (Initial): Activates the demonstration on the
screen.
• OFF: Cancels.
<Scroll>
• ON (Initial): Scrolls the displayed information
repeatedly.
• Once: Scrolls the displayed information once.
• OFF: Cancels.
Pressing [<] scrolls the text regardless of this setting.
<Menu Customize>
Change the items to display on the <TOP MENU>
screen. (Page 56)
<Screen Adjustment>
Adjust the brightness and blackness of the screen.
Press [Enter] to display the setting screen, select
[DIM ON] (dimmer on)/[DIM OFF] (dimmer off),
then change the following settings:
• Bright: Adjusts brightness.
– –15 to +15 (Initial: 0 for dimmer on/+15 for
dimmer off)
• Black: Adjusts blackness.
– –10 to +10 (Initial: 0)
<Parking Guidelines>
• ON (Initial): Displays the parking guidelines.
(Page 40)
• OFF: Cancels.
<Guidelines Setup>
Adjusts the parking guidelines. (Page 41)
<Parking Assist Disp.>
When an ADS adapter is connected, you can display
information about obstacles around the car.
• ON: Always displays information.
• Dyn. (Initial): Displays information when the
sensor detects obstacles.
• OFF: Cancels.
<Parking Assist Pos.>
Select where information about obstacles is
displayed on the screen (left or right).
• Left/Right (Initial)
❏ <Input> setting screen
<R-CAM Interrupt>
• ON: Displays the picture from the rear view
camera when you shift the gear to the reverse (R)
position.
• OFF (Initial): Select this when no camera is
connected.
ENGLISH
DDX_6902S.indb 59
59
2015/07/24 14:08
SETTINGS
❏ <System> setting screen
<Language>
Select the text language used for on-screen
information.
• English (Initial)/Español/Français/Deutsch/
Italiano/Nederlands/Ελληνικά/Português/
Türkçe/Čeština/Polski/Magyar/Руccĸий/
/
/
/
/
/
/Bahasa
Indonesia/
• GUI Language: Select the language used for
displaying operation buttons and menu items.
– English (Initial)/Local (the language selected
above)
<Clock>
Adjust the clock time. (Page 5)
<iPod Setup>
Configure the settings of iPod. (Page 17)
<APP Setup>
• APP Connection Setup: Configure the Apps
settings. (Page 50)
• APP Interrupt Volume: Adjust the App volume.
– 0 to 35 (Initial: 17)
<CarPlay Connection>
Select the usage of the iPhone compatible with
CarPlay. (Page 20)
• ON (Initial): Allows “Apple CarPlay”* to be
selected on the <TOP MENU> screen.
• OFF: Allows “APPs” to be selected on the <TOP
MENU> screen.
<Bluetooth Setup>
Configure settings for using a Bluetooth device,
such as connection and other general operations.
(Page 49)
<Beep>
• ON (Initial): Activates the key-touch tone.
• OFF: Cancels.
<SETUP Memory>
You can memorize, recall, or clear the settings you
have made. (Page 56)
<OEM Setup>
Shows information about/changes the settings for
using the ADS adapter.
<ATT Key Long Press>
Assigns the function of the volume knob when held.
• AUDIO: Displays the <Equalizer> screen.
(Page 51)
• R-CAM: Displays the picture from the rear view
camera. (Page 40)
• V-OFF: Turns off the screen. (Page 7)
<AV-OUT>
You can determine the use of the external
component connected to the AV-OUT terminal.
• OFF (Initial)/AV-IN1/AV-IN2/DVD
<AV Key Long Press>
Assigns the function of the AV button when held.
• AV-OUT (Initial): Selects the AV source for extra
monitors or amplifiers.
• APPs: Displays the Apps screen. (Page 22)
<SI>
Activate or deactivate the security function.
(Page 4)
<Serial Number>
Displays the serial number.
<Touch Panel Adjust>
Adjust the touch position of the buttons on the
screen. (Page 57)
<System Information>
Displays the version information of the software.
You can update the software. (Page 57)
<Open Source Licenses>
Shows the Open Source Licenses.
* “Apple CarPlay” is displayed as the source on the <TOP
MENU> screen when iPhone compatible with CarPlay is
connected.
60
DDX_6902S.indb 60
2015/07/24 14:08
CONNECTION/INSTALLATION
Before installing the unit
V WARNING
• If you connect the ignition wire (red) and the
battery wire (yellow) to the car chassis (ground),
you may cause a short circuit, that in turn may
start a fire. Always connect those wires to the
power source running through the fuse box.
• Do not cut out the fuse from the ignition wire (red)
and the battery wire (yellow). The power supply
must be connected to the wires via the fuse.
V Precautions on installation and connection
• Mounting and wiring this product requires
skills and experience. For best safety, leave the
mounting and wiring work to professionals.
• Make sure to ground the unit to a negative 12 V
DC power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
• If the power is not turned on (“Miswiring DC Offset
Error”, “Warning DC Offset Error” is displayed),
the speaker wire may have a short circuit or
have touched the chassis of the vehicle and the
protection function may have been activated.
Therefore, the speaker wire should be checked.
• If your car’s ignition does not have an ACC
position, connect the ignition wires to a power
source that can be turned on and off with the
ignition key. If you connect the ignition wire to a
power source with a constant voltage supply, such
as with battery wires, the battery may be drained.
• If the fuse blows, first make sure the wires are not
touching to cause a short circuit, then replace the
old fuse with one with the same rating.
• Insulate unconnected wires with vinyl tape or
other similar material. To prevent a short circuit,
do not remove the caps on the ends of the
unconnected wires or the terminals.
• Connect the speaker wires correctly to the
terminals to which they correspond. The unit may
be damaged or fail to work if you share the [
wires or ground them to any metal part in the car.
• When only two speakers are being connected to
the system, connect both connectors either to
the front output terminals or to the rear output
terminals (do not mix front and rear). For example,
if you connect the ] connector of the left speaker
to a front output terminal, do not connect the [
connector to a rear output terminal.
• After the unit is installed, check whether the brake
lamps, blinkers, wipers, etc. on the car are working
properly.
• Mount the unit so that the mounting angle is 30°
or less.
• Do not press hard on the panel surface when
installing the unit in the vehicle. Otherwise
scratches, damage, or failure may result.
• This unit has a cooling fan to decrease the
internal temperature. Do not mount the unit
in a place where the cooling fan of the unit is
blocked. Blocking these openings will prevent the
cooling of the internal temperature and result in
malfunction.
Cooling fan
•
V CAUTION
Install this unit in the console of your vehicle.
Do not touch the metal part of this unit during and
shortly after the use of the unit. Metal parts such as
the heat sink and enclosure become hot.
❏ Supplied accessories for installation
1
2
3
4
5
6
7
8
9
Wiring harness × 1
Trim plate × 1
Extension wire (2 m) × 1
Extraction keys × 2
Flat head screws (M5 x 7 mm) × 6
Round head screws (M5 x 6 mm) × 6
Microphone (3 m) × 1
GPS antenna (3.5 m) × 1
Metal plate × 1
ENGLISH
DDX_6902S.indb 61
61
2015/07/24 14:08
CONNECTION/INSTALLATION
❏ Installation procedure
1 To prevent a short circuit, remove the key
2
3
4
5
6
from the ignition and disconnect the ·
battery.
Make the proper input and output wire
connections for each unit.
Connect the speaker wires of the wiring
harness.
Connect the wiring harness wires in the
following order: ground, battery, ignition.
Connect the wiring harness connector to
the unit.
Install the unit in your car.
• Make sure that the unit is installed securely
in place. If the unit is unstable, it may
malfunction (e.g., the sound may skip).
7 Reconnect the · battery.
8 Press the reset button.
9 Configure <Initial Setup>. (Page 4)
❏ Installing the trim plate
Installing the unit
1 Attach the trim plate (2).
❏ Installing the unit
2
• Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
❏ When installing the unit using the
mounting bracket removed from the
car
5 or 6
Car Bracket
5 or 6
• Select the appropriate type of screw for the
mounting bracket: flat head (5) or round head
(6).
62
DDX_6902S.indb 62
2015/07/24 14:08
CONNECTION/INSTALLATION
Connection
❏ Connecting wires to terminals
USB input terminal (1.0 m):
Page 64
Page 64
Page 65
Purple with white stripe
(Reverse sensor wire)
GPS antenna terminal:
Page 65
Connect the antenna
cord to the antenna
terminal.
1
10 A fuse
Connect to the vehicle’s reverse lamp harness when
using the optional rear view camera.
Light green (Parking
sensor wire)
3
Connect SiriusXM Connect Vehicle Tuner
(commercially available). See page 64.
White ª / White with black stripe · : To front speaker (left)
Connect to the vehicle’s parking
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
* If no connections are made, do not let the cable come out from the
tab.
Gray ª / Gray with black stripe · : To front speaker (right)
Green ª / Green with black stripe · : To rear speaker (left)
Purple ª / Purple with black stripe · : To rear speaker (right)
Blue (Antenna control wire)
Depending on what antenna you are using, connect either to the control
terminal of the motor antenna, or to the power terminal for the booster
amplifier of the film-type antenna. (Max. 300 mA, 12 V)
When using the optional power amplifier, connect to its power control terminal.
Blue with white stripe (Power control wire)
Not used.
Brown (Mute control wire)
To use the steering wheel remote control feature, an exclusive remote adapter
(not supplied) matching your car is required.
Light blue with yellow stripe (Steering remote control wire)
To car light control switch
Orange with white stripe (Dimmer control wire)
Red (Ignition wire)
*
Ignition key switch
(ACC)
Yellow (Battery wire)
(BATT)
Black (Ground wire)
(GND)
To car chassis
Fuse box
Battery
ENGLISH
DDX_6902S.indb 63
63
2015/07/24 14:08
CONNECTION/INSTALLATION
❏ Connecting an iPod/iPhone
iPod/iPhone (Lightning
connector models)
(commercially available)
❏ Connecting a USB device
iPod/iPhone (30-pin
connector models)
(commercially available)
USB device*
(commercially available)
1.0 m
1
2
3
4
5
6
7
KCA-iP103
(optional accessory)
8
0.8 m
9
KCA-iP102
(optional accessory)
p
0.8 m
1.0 m
1.8 m
KCA-iP202
(optional accessory)
* Use CA-U1EX to extend the cable if necessary. (Max 500 mA, 5V)
❏ Connecting external components
AV-OUT/Video output (Yellow)
Rear view camera input (Yellow)
Audio Video input (AV-IN1)*1
iPod/Audio Video input (iPod/AV-IN2)*1
iDatalink input for connecting ADS adapter
(commercially available)
Subwoofer preout (monaural output)*2
• Subwoofer left output (White)
• Subwoofer right output (Red)
Rear preout*2
• Audio left output (White)
• Audio right output (Red)
Front preout*2
• Audio left output (White)
• Audio right output (Red)
Audio output (ø3.5 mini jack)
Resistance-free stereo type mini plug
Expansion port for connecting SiriusXM Connect
Vehicle Tuner (commercially available)
*1 When connecting the component to play on “AV-IN1” or “AVIN2”, use the Audio and Video cable CA-C3AV (optional accessory).
*2 When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
64
DDX_6902S.indb 64
2015/07/24 14:08
CONNECTION/INSTALLATION
❏ Connecting microphone for Bluetooth
❏ Connecting the GPS antenna
Connect the microphone (7) to the MIC terminal.
• To install the microphone, peel off the adhesive
tape, fix it on the installation position, then adjust
the direction of the microphone to face the driver.
After installing, fix the microphone cable to the car
with clamps (commercially available).
Connect the GPS antenna (8) to the GPS terminal.
• To install the GPS antenna, fix the metal plate
(9) firmly on the dashboard, then place the GPS
antenna (8) on the metal plate (9).
– Clean the dashboard or other surface
beforehand.
– Install the GPS antenna (8) inside of the car, as
horizontally as possible to allow easy reception
of the GPS satellite signals.
– You can bend the metal plate (9) to conform to
a curved surface, if necessary.
• Depending on the type of car, reception of the
GPS satellite signals might not be possible with an
internal installation.
• Install this GPS antenna in an area away from any
antennas that are used with CB radios or satellite
televisions.
• The GPS antenna should be installed at a position
that at least 30 cm (12 inches) from mobile phone
or other transmitting antennas.
• The above types of communication may interfere
with signals from the GPS satellite.
• Painting the GPS antenna with (metallic) paint
may cause reduced performance.
8
9
7
8
ENGLISH
DDX_6902S.indb 65
65
2015/07/24 14:08
CONNECTION/INSTALLATION
Removing the unit
❏ Removing the trim plate
1 Engage the catch pins on the extraction
key (4) and remove the two locks on the
lower part. Lower the frame and pull it
forward.
❏ Removing the unit
1 Remove the trim plate. (See the left
column.)
2 Insert the two extraction keys (4), then
pull them as illustrated so that the unit can
be removed.
4
4
2 Remove from the upper two catches.
• Be careful to avoid injury from the catch pins on
the extraction key.
• The frame can be removed from the top side in
the same manner.
66
DDX_6902S.indb 66
2015/07/24 14:08
REFERENCES
Maintenance
❏ Caution on cleaning the unit
Do not use any solvent (for example, thinner,
benzine, etc.), detergent, or insecticide. This may
damage the monitor or the unit.
Recommended cleaning method:
Gently wipe the panel with a soft, dry cloth.
❏ Moisture condensation
Moisture may condense on the lens inside the unit in
the following cases:
• After starting the heater in the car.
• If it becomes very humid inside the car.
Should this occur, the unit may malfunction. In this
case, eject the disc and leave the unit turned on for a
few hours until the moisture evaporates.
❏ To keep discs clean
Dirty discs may not play correctly.
If a disc does become dirty, wipe it with a soft cloth
in a straight line from the center to the edge.
• Do not use any solvents (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.
❏ To play new discs
New discs may have some rough spots around the
inner and outer edges. If such a disc is used, this unit
may reject the disc.
• To remove these rough spots, rub the edges with
a pencil or ball-point pen, etc.
More information
– Always hold the disc by the edges. Do not touch
its recording surface.
• When storing a disc in its case, gently insert the
disc around the center holder (with the printed
surface facing up).
– Make sure to store discs in their cases after use.
•
•
•
❏ File playback
•
the extension code <.mpg> or <.mpeg>.
• The stream format should conform to MPEG
system/program stream.
• Audio streams should conform to MPEG1 Audio
Layer-2.
extension code <.jpg>, <.jpeg>, <.bmp> or
<.png>.
2 000 x 2 000 resolution.
its resolution.
be played.
USB: MP3/WMA/WAV/AAC/FLAC)
•
•
❏ How to handle discs
• When removing a disc from its case, press down
the center holder of the case and lift the disc out,
holding it by the edges.
•
(regardless of the letter case—upper/lower).
conditions below:
– Bit rate:
MP3: 8 kbps – 320 kbps
WMA: 48 kbps – 192 kbps
AAC: For discs: 16 kbps – 320 kbps
For USB: 32 kbps – 320 kbps
– Sampling frequency:
MP3: 8 kHz – 48 kHz
WMA: For discs: 32 kHz – 48 kHz
For USB: 8 kHz – 48 kHz
WAV: 8 kHz – 48 kHz
AAC: 16 kHz – 48 kHz
FLAC : 8 kHz – 48 kHz
• This unit can show ID3 Tag Version
1.0/1.1/2.2/2.3/2.4 (for MP3).
• This unit can also show WMA/AAC/FLAC Tag.
Continued on the next page...
ENGLISH
DDX_6902S.indb 67
67
2015/07/24 14:08
REFERENCES
• This unit can play back files recorded in VBR
(variable bit rate).
• Files recorded in VBR have a discrepancy in
elapsed time indication.
• This unit cannot play back the following files:
– MP3 files encoded with MP3i and MP3 PRO
format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless, professional,
and voice format.
– WMA files which are not based upon Windows
Media® Audio.
– WMA/AAC files copy-protected with DRM.
– AAC files encoded using any other application
than iTunes.
– AAC files copy-protected with FairPlay (except
those stored on an iPod).
– Files which have data such as AIFF, ATRAC3, etc.
• This unit can display jacket pictures that meet the
conditions below:
– Picture size: 32 x 32 to 1 232 x 672 (PNG: 800 x
480) resolution
– Data size: less than 650 KB.
– File type: JPEG/PNG/BMP
Playing H.264/WMV files (for USB only)
• This unit can play back files with the extension
code <.mp4>, <.flv>, <.avi>, <.mkv> or <.wmv>.
• This unit can only play back files that are 1 280 x
720 pixels@30 fps or less.
• The stream format should conform to MPEG
system/program stream.
• For some files, the picture is not fully displayed
(black bars appear on the top and bottom or right
and left sides depending on the horizontal to
vertical ratio).
❏ Disc playback
Playable disc types
Disc type
DVD
• DTS sound cannot be
reproduced or emitted from
this unit.
DVD Recordable/Rewritable
(DVD-R/-RW*2, +R/+RW*3)
• DVD Video: UDF bridge
• DVD-VR
• MPEG1/MPEG2/MP3/WMA/
AAC: ISO 9660 level 1,
level 2, Romeo, Joliet
Dual Disc
CD/VCD
CD Recordable/Rewritable
(CD-R/-RW)
• ISO 9660 level 1, level 2,
Romeo, Joliet
Recording format,
file type, etc.
DVD Video*1
•
•
•
•
DVD Video
DVD-VR*4
MPEG1/MPEG2
MP3/WMA/AAC
DVD side
• VCD (Video CD)
• Audio CD/
CD Text (CD-DA)
• VCD (Video CD)
• CD-DA
• MPEG1/MPEG2
• MP3/WMA/AAC
*1 DVD Region code: 1
If you insert a DVD Video disc of an incorrect Region Code, “Region
Code Error” appears on the screen.
*2 DVD-R recorded in multi-border format are also playable (except for
dual layer discs). DVD-RW dual layer discs are not playable.
*3 It is possible to play back finalized +R/+RW (Video format only)
discs. “DVD” is selected as the disc type when a +R/+RW disc is
loaded. +RW double layer discs are not playable.
*4 This unit cannot play back content protected with CPRM.
Unplayable discs
• Unplayable disc types and formats are as follows:
– DVD-Audio/DVD-ROM discs
– MPEG4/DivX/JPEG/FLAC/MKV/DVD+VR/DVDRAM recorded on DVD-R/RW or +R/+RW
– SVCD (Super Video CD), CD-ROM, CD-I (CD-I
Ready), DTS-CD
– MPEG4/JPEG/FLAC/MKV recorded on CD-R/RW
• Discs that are not round.
• Discs with coloring on the recording surface or
discs that are dirty.
• Recordable/Rewritable discs that have not been
finalized.
• 3 inch discs. Attempting to insert these discs using
an adapter may cause a malfunction.
DualDisc playback
The Non-DVD side of a “DualDisc” does not comply
with the “Compact Disc Digital Audio” standard.
Therefore, the use of the Non-DVD side of a DualDisc
on this product cannot be recommended.
Playing Recordable/Rewritable discs
• This unit can recognize a total of 64 770 files and
254 folders (a maximum of 255 files per folder).
• Use only “finalized” discs.
• This unit can play back multi-session discs;
however, unclosed sessions will be skipped while
playing.
• Some discs or files may not be played back due to
their characteristics or recording conditions.
68
DDX_6902S.indb 68
2015/07/24 14:08
REFERENCES
❏ About data stored in the connected
USB device/iPod/iPhone/Android
device
• We bear no responsibility for any loss of data in
iPod/iPhone, USB mass storage class devices, and
Android devices while using this unit.
❏ USB playback
Playable files on a USB device
• This unit can play the following types of files
stored in a USB mass storage class device.
– JPEG/BMP/PNG/MPEG1/MPEG2/MP3/WMA/
WAV/AAC/FLAC/H.264/WMV (VC-1)
• This unit can recognize a total of 5 000 files and
250 folders (a maximum of 999 files per folder).
• Make sure all important data has been backed up
to avoid losing the data.
Notes on using a USB device:
• This unit cannot play back files whose file name or
folder name contains “#” or “%”.
• This unit may not play back files in a USB device
properly when using a USB extension cable.
• USB devices equipped with special functions such
as data security functions cannot be used with the
unit.
• Do not use a USB device with 2 or more partitions.
• Depending on the shape of the USB devices and
connection ports, some USB devices may not be
attached properly or the connection might be
loose.
• This unit may not recognize a memory card
inserted into the USB card reader.
• When connecting with a USB cable, use the USB
2.0 cable.
• The maximum number of characters (when the
characters are 1 byte):
– Folder names: 128 characters
– File names: 128 characters
• Avoid using the USB device if it might affect
driving safety.
• Do not pull out and connect the USB device
repeatedly while “Reading” is shown on the
screen.
• Electrostatic shock at connecting a USB device
may cause abnormal playback of the device. In this
case, disconnect the USB device then reset this
unit and the USB device.
• Operation and power supply may not work as
intended for some USB devices.
• Do not leave a USB device in the car, or expose to
direct sunlight or high temperatures to prevent
deformation or damage to the device.
❏ Notes on playing iPod/iPhone
• iPod/iPhone that can be connected to this unit:
Made for
– iPod with video
– iPod classic
– iPod nano (7th Generation)
– iPod nano (6th Generation)
– iPod nano (5th Generation)
– iPod nano (4th Generation)
– iPod nano (3rd Generation)
– iPod touch (5th Generation)
– iPod touch (4th Generation)
– iPod touch (3rd Generation)
– iPod touch (2nd Generation)
– iPod touch (1st Generation)
•
•
•
•
– iPhone 6 Plus
– iPhone 6
– iPhone 5S
– iPhone 5C
– iPhone 5
– iPhone 4S
– iPhone 4
– iPhone 3GS
– iPhone 3G
– iPhone
When operating an iPod/iPhone, some operations
may not be performed correctly or as intended. In
this case, visit the following KENWOOD web site:
<www.kenwood.com/cs/ce/ipod>
For some iPod/iPhone models, the performance
may be abnormal or unstable during operation. In
this case, disconnect the iPod/iPhone device, then
check its condition.
If the performance is not improved or slow, reset
your iPod/iPhone.
When you turn on this unit, the iPod/iPhone is
charged through the unit.
The text information may not be displayed
correctly.
ENGLISH
DDX_6902S.indb 69
69
2015/07/24 14:08
REFERENCES
❏ Language codes (for DVD/DVD-VR language selection)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
Afar
Abkhazian
Afrikaans
Ameharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scots Gaelic
GL
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JA
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean (KOR)
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS
QU
RM
RN
RO
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay (MAY)
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
SO
SQ
SR
SS
ST
SU
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Zulu
Error message list
If an error occurs while using the unit, a message
appears. Take appropriate action according to the
following message/remedy/cause list.
“No Signal”:
• Start playback on the external component
connected to the AV-IN1 or iPod/AV-IN2 input
terminal.
• Check the cords and connections.
• Signal input is too weak.
“Miswiring DC Offset Error”/“Warning DC Offset
Error”:
• A speaker cord has shorted or it has come into
contact with the car chassis. Wire or insulate the
speaker cord as appropriate, then reset the unit.
(Pages 3 and 63)
“Parking off”:
• No playback picture is shown when the parking
brake is not engaged.
“Authorization Error”:
• Check whether the connected iPod/iPhone is
compatible with this unit. (Page 69)
70
DDX_6902S.indb 70
2015/07/24 14:08
REFERENCES
“USB Device Error”:
• The USB power voltage is abnormal.
• Turn off and turn on the unit.
• Connect another USB device.
“Please Wait...”:
• The unit is preparing to use the Bluetooth
function. If the message does not disappear, turn
off and turn on the unit, then connect the device
again (or reset the unit).
“Disconnected”:
• The device is not connected.
“Check device”:
• The application is not active.
“Check App”:
• A connection to the application cannot be
established.
“Please update Pandora App”:
• The Pandora application on your iPod touch/
iPhone/Android/BlackBerry is not the latest
version. Update the application.
“Please check device.”:
• The Pandora application on your iPod touch/
iPhone/Android/BlackBerry is not started up.
• The Pandora application is not installed in the
connected device.
• An error has occurred on the Pandora application.
“Login Error”:
• You have not been signed into Pandora.
“No skips remaining”:
• No more songs can be skipped.
“Failed to save your thumb rating”:
• Thumb-up/down is prohibited.
“No Station”:
• No station is available.
“No Active Station”:
• No station is being played.
“Station limit reached”:
• The Station List is full and no more stations can be
registered.
“Failed to save your bookmark”:
• The unit has failed to save a bookmark. Try the
operation again.
“Limited Connectivity”:
• The connection with the Pandora application
cannot be established.
“Pandora not available”:
• You cannot use the Pandora application from
the area where you are currently trying to access
Pandora.
“Try again later”:
• The Pandora server is under maintenance.
“Station does not exist”:
• The selected station has been deleted by another
device or has expired.
“Cannot create a Station”:
• You cannot create a station during the readonly mode or when network connection is not
established.
“SXM No Signal”:
• Make sure the SiriusXM Satellite Radio antenna is
mounted outside the vehicle. Move the vehicle to
an area with a clear view of the sky.
“SXM Check Antenna”:
• Check the SiriusXM Satellite Radio antenna
connection, and make sure the antenna is firmly
attached to the tuner.
• Check whether the SiriusXM Satellite Radio
antenna cable is bent or broken. If it is damaged,
replace the whole antenna unit.
“SXM Check Tuner”:
• Make sure the SiriusXM Connect Vehicle Tuner is
connected to the unit.
“SXM Chan Unavailable” (appears on the screen
for about 2 seconds, then returns to the previous
channel):
• The selected channel is no longer available. Select
another channel or continue listening to the
previous channel.
“SXM Ch Unsubscribed” (appears on the screen
for about 2 seconds, then returns to the previous
channel):
• The selected channel is not part of your current
subscription plan.
– In the U.S.A., visit www.siriusxm.com or call
1-866-635-2349 if you have questions about
your subscription package or would like to
subscribe to this channel.
– In Canada, visit www.siriusxm.ca or call 1-877438-9677.
Continued on the next page...
ENGLISH
DDX_6902S.indb 71
71
2015/07/24 14:08
REFERENCES
“SXM Subscription Updated – Press Enter to
Continue”:
• Your subscription has been updated. Press the
appropriate button to continue.
“SXM Channel Locked”
• The selected channel has been locked by the
parental controls. Enter the parental code when
you are asked. (Page 37)
“SXM Incorrect Lock Code”
• The selected channel is a mature or parental lock
channel, and locked by the parental code. Enter
the correct parental code to unlock it.
Troubleshooting
What appears to be trouble is not always serious.
Check the following points before calling a service
center.
• For operations with the external components,
refer also to the instructions supplied with the
adapters used for the connections (as well as
the instructions supplied with the external
components).
❏ General
No sound comes out of the speakers.
• Adjust the volume to the optimum level.
• Check the cords and connections.
No picture is displayed on the screen.
• Turn on the screen. (Page 7)
The unit does not work at all.
• Reset the unit. (Page 3)
❏ Discs
Recordable/Rewritable discs cannot be played
back.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
Playback does not start.
• The format of files is not supported by the unit.
No picture appears on the external monitor.
• Connect the video cord correctly.
• Select the correct input on the external monitor.
MPEG1/MPEG2/MP3/WMA/AAC discs cannot be
played back.
• Record the tracks using a compatible application
on the appropriate discs. (Page 68)
• Add appropriate extension codes to the file
names.
Tracks on the Recordable/Rewritable discs are
not played back as you have intended them to
play.
• Playback order may differ from the one played
back using other players.
❏ USB
“Reading” does not disappear from the screen.
• Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
• The tracks are not properly copied into the USB
device. Copy the tracks again, and try again.
Tracks are not played back as you have intended
them to play.
• Playback order may differ from the one played
back using other players.
❏ iPod/iPhone
No sound comes out of the speakers.
• Disconnect the iPod/iPhone, then connect it again.
• Select another source, then reselect “iPod”.
The iPod/iPhone does not turn on or does not
work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Reset the iPod/iPhone.
Sound is distorted.
• Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
• Turn off (uncheck) “VoiceOver” on the iPod/
iPhone. For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing artwork.
• Operate the unit after the artwork has loaded.
The iPod/iPhone not compatible with CarPlay
cannot be connected via Bluetooth.
• Select [ON] for <CarPlay Connection> on the
<System> menu screen. (Page 20)
72
DDX_6902S.indb 72
2015/07/24 14:08
REFERENCES
Videos cannot be played.
• Connect with USB Audio and Video cable
KCA-iP202 (optional accessory) to iPod/iPhone
30-pin connector model. Other cables cannot be
used.
No sound of videos comes out.
• Connect with USB Audio and Video cable
KCA-iP202 (optional accessory) to iPod/iPhone
30-pin connector model. Other cables cannot be
used.
❏ Apple CarPlay/APPs
Desired source (“Apple CarPlay”/“APPs”) is not
displayed on the <TOP MENU> screen.
• Check whether the connected device is
compatible with CarPlay.
• When iPhone compatible with CarPlay is
connected, check the <CarPlay Connection>
setting. (Page 60)
❏ AV-IN1/AV-IN2
No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.
❏ HD Radio reception
AME automatic presetting does not work.
• Store stations manually. (Page 31)
Static noise while listening to the radio.
• Connect the antenna firmly.
Sound quality changes when receiving HD Radio
stations.
• Fix the reception mode either to <Digital> or
<Analog>. (Page 30)
The Bluetooth device does not detect the unit.
• Search from the Bluetooth device again.
❏ iHeartRADIO/Pandora/AUPEO!
The unit does not pair with the Bluetooth device.
• For devices compatible with Bluetooth 2.1:
Register the device using a PIN code. (Page 43)
• For devices compatible with Bluetooth 2.0:
Enter the same PIN code for both the unit and
target device. If the PIN code of the device is not
indicated in its instructions, try “0000” or “1234.”
• Turn off, then turn on the Bluetooth device.
The application does not work.
• The application on your iPod touch/iPhone/
Android is not the latest version. Update the
application.
Echo or noise occurs.
• Adjust the microphone unit position.
• Adjust the echo volume or noise reduction
volume. (Page 45)
❏ Bluetooth
The unit does not respond when you try to copy
the phone book to the unit.
• You may have tried to copy the same entries (as
stored) to the unit.
No sound can be heard.
• The HD Radio reception mode is not appropriate.
Select the appropriate mode from <Digital>,
<Analog> or <Auto>.
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth
phone.
• Turn off, then turn on the unit.
(When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
• Check whether the connected audio player
supports AVRCP (Audio Video Remote Control
Profile).
Specifications
❏ Monitor section
Picture Size (W x H)
6.2 inches (diagonal) wide
137.5 mm × 77.2 mm (5-7/16" ×
3-1/16")
Display System
Transparent TN LCD panel
Drive System
TFT active matrix system
Number of Pixels 1 152 000 (800H × 480V × RGB)
Effective Pixels
99.99%
Pixel Arrangement
RGB striped arrangement
Back Lighting
LED
ENGLISH
DDX_6902S.indb 73
73
2015/07/24 14:08
REFERENCES
❏ DVD player section
❏ Bluetooth section
❏ DSP section
D/A Converter
Audio Decoder
Technology
Frequency
Output Power
Graphics equalizer
DDX6902S:
BAND
7 Band
Frequency (Hz) (BAND1-7)
62.5/160/400/1k/2.5k/6.3k/16k
Gain
–9/–8/–7/–6/–5/–4/–3/–2/
–1/0/1/2/3/4/5/6/7/8/9 dB
DDX6702S:
BAND
5 Band
Frequency (Hz) (BAND1-5)
62.5/250/1k/4k/16k
Gain
–9/–8/–7/–6/–5/–4/–3/–2/
–1/0/1/2/3/4/5/6/7/8/9 dB
24 bit
Linear PCM/Dolby Digital/MP3/
WMA/AAC
Video Decoder
MPEG1/MPEG2
Wow & Flutter
Below Measurable Limit
Frequency Response
96 kHz Sampling: 20 Hz to 20 000 Hz
48 kHz Sampling: 20 Hz to 20 000 Hz
44.1 kHz Sampling: 20 Hz to 20 000 Hz
Total Harmonic Distortion
0.010% (1 kHz)
Signal to Noise Ratio
94 dB (DVD-Video 96 kHz)
Dynamic Range
Disc Format
91 dB (DVD-Video 96 kHz)
DVD-Video/DVD-VR/VIDEO-CD/
CD-DA
Sampling Frequency
44.1 kHz/48 kHz/96 kHz
Quantifying Bit Number
16/20/24 bit
❏ USB interface section
USB Standard
USB 2.0 High Speed
File System
FAT 16/32
Maximum Power Supply Current
DC 5 V 1.5 A
D/A Converter
Audio Decoder
Video Decoder
Bluetooth Ver 3.0 + EDR
2.402 GHz to 2.480 GHz
+4 dBm (MAX), 0 dBm (AVE),
Power Class 2
Maximum Communication Range
Line of sight approx. 10 m
(32.8 ft)
Audio Codec
Profile
SBC/AAC/MP3
HFP (Hands Free Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
GAP (Generic Access Profile)
PBAP (Phonebook Access Profile)
SDP (Service Discovery Profile)
SPP (Serial Port Profile)
2 Way X'Over
HIGH PASS FILTER frequency
Through/50/60/80/100/120/150/
180/220
SLOPE
–6/–12/–18/–24 dB/Oct.
LOW PASS FILTER frequency
50/60/80/100/120/Through
SLOPE
–6/–12/–18/–24 dB/Oct.
Position
Front/Rear/Subwoofer Delay
0 ft to 20.0 ft (0.07 ft Step)
Gain
–8 dB to 0 dB
Subwoofer Level
–50 dB to +10 dB
24 bit
MP3/WMA/AAC/WAV/FLAC
MPEG1/MPEG2/H.264/WMV/
JPEG/BMP/PNG
74
DDX_6902S.indb 74
2015/07/24 14:08
REFERENCES
❏ FM tuner section
Frequency Range
87.9 MHz to 107.9 MHz (200 kHz)
Usable Sensitivity (S/N: 30 dB)
7.2 dBf (0.63 μV/75 Ω)
Quieting Sensitivity (S/N: 50 dB)
15.2 dBf (1.58 μV/75 Ω)
Frequency Response (±3.0 dB)
Digital:
20 Hz to 20 kHz
Analog:
30 Hz to 15 kHz
Signal to Noise Ratio
Digital:
75 dB (STEREO)
Analog:
68 dB (MONO)
Selectivity (±400 kHz)
≥ 80 dB
Stereo Separation 40 dB (1 kHz)
❏ AM tuner section
Frequency Range (10 kHz)
530 kHz to 1 700 kHz
Usable Sensitivity 29 dBμ
Frequency Response (±3.0 dB)
Digital:
40 Hz to 15 kHz
Signal to Noise Ratio
Digital:
75 dB (STEREO)
❏ Video section
Color System of External Video Input
NTSC/PAL
External Video Input Level (mini jack)
1 Vp-p/75 Ω
External Audio Max Input Level (mini jack)
2 V/25 kΩ
Design and specifications are subject to change
without notice.
Video Output Level (RCA jacks)
1 Vp-p/75 Ω
❏ Trademarks and licenses
Audio Output Level (mini jacks)
1.2 V/10 kΩ
❏ Audio section
Maximum Power
50 W × 4
Full Bandwidth Power
22 W × 4 (at less than 1%THD)
Preout Level
DDX6902S:
DDX6702S:
5 V/10 kΩ
4 V/10 kΩ
Preout Impedance
DDX6902S:
≤ 250 Ω
DDX6702S:
≤ 600 Ω
Speaker Impedance
4 Ω to 8 Ω
❏ General
Operating Voltage
14.4 V (10.5 V to 16 V allowable)
Maximum Current Consumption
10 A
Installation Dimensions (W × H × D)
182 mm × 112 mm × 157 mm
(7-3/16" × 4-7/16" × 6-3/16")
• Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
• “DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation registered in the US, Japan
and other countries.
• The “AAC” logo is a trademark of Dolby
Laboratories.
• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
• “Made for iPod,” and “Made for iPhone” mean
that an electronic accessory has been designed
to connect specifically to iPod, or iPhone,
respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards. Please note that the use
of this accessory with iPod, or iPhone may affect
wireless performance. iPhone, iPod, iPod classic,
iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other
countries.
• Lightning is a trademark of Apple Inc.
• Apple, Siri, Apple CarPlay and Apple CarPlay logo
are trademarks of Apple Inc., registered in the U.S.
and other countries.
• Android, Google Play and other marks are
trademarks of Google Inc.
Operational Temperature Range
–10°C to +60°C
Weight
2.0 kg (4.4 lbs)
ENGLISH
DDX_6902S.indb 75
75
2015/07/24 14:08
REFERENCES
• This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
• Font for this product is designed by Ricoh.
• THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON-COMMERCIAL USE
OF A CONSUMER FOR (i) ENCODING VIDEO
IN COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD (“MPEG-4 VIDEO”) AND/OR (ii)
DECODING MPEG-4 VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL
AND NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED
BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR
ANY OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO PROMOTIONAL,
INTERNAL AND COMMERCIAL USES AND
LICENSING MAY BE OBTAINED FROM MPEG LA,
LLC. SEE HTTP://WWW.MPEGLA.COM.
• THIS PRODUCT IS LICENSED UNDER THE AVC
PATENT PORTFOLIO LICENSE FOR THE PERSONAL
USE OF A CONSUMER OR OTHER USES IN WHICH
IT DOES NOT RECEIVE REMUNERATION TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC
STANDARD ("AVC VIDEO") AND/OR (ii) DECODE
AVC VIDEO THAT WAS ENCODED BY A CONSUMER
ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED
OR SHALL BE IMPLIED FOR ANY OTHER USE.
ADDITIONAL INFORMATION MAY BE OBTAINED
FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.
COM
• Pandora, the Pandora logo, and the Pandora trade
dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission.
• HD Radio Technology manufactured under license
from iBiquity Digital Corporation. U.S. and Foreign
Patents. HD Radio™ and the HD, HD Radio, and
“Arc” logos are proprietary trademarks of iBiquity
Digital Corp.
• Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights
reserved.
• BlackBerry®, RIM®, Research In Motion® and related
trademarks, names and logos are the property
of Research In Motion Limited and are registered
and/or used in the U.S. and countries around
the world. Used under license from Research In
Motion Limited.
• The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by JVC KENWOOD
Corporation is under license. Other trademarks
and trade names are those of their respective
owners.
• iHeartRadio® is a registered mark of Clear Channel
Broadcasting, Inc. in the United States and other
countries. Such marks are used under license.
• libFLAC
Copyright (C) 2000,2001,2002,2003,2004,2005,
2006,2007,2008,2009 Josh Coalson
Redistribution and use in source and binary forms,
with or without modification, are permitted
provided that the following conditions are met:
– Redistributions of source code must retain the
above copyright notice, this list of conditions
and the following disclaimer.
– Redistributions in binary form must reproduce
the above copyright notice, this list of
conditions and the following disclaimer in the
documentation and/or other materials provided
with the distribution.
– Neither the name of the Xiph.org Foundation
nor the names of its contributors may be used
to endorse or promote products derived from
this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
• “aupeo” is a trade mark of Aupeo Ltd.
76
DDX_6902S.indb 76
2015/07/24 14:08
Download PDF