2.4 GHz Digital High-Fidelity Wireless System - Audio

System Configurations
System Components
ATW-1301 Body-pack System
ATW-1311/L Dual Lavalier System
includes:
ATW-RC13, ATW-RU13, ATW-T1001
includes:
ATW-RC13, ATW-RU13 x2, ATW-T1001 x2,
MT830cW x2
ATW-1301/L Lavalier System
ATW-1312 Body-pack / Handheld System
includes:
ATW-RC13, ATW-RU13, ATW-T1001,
MT830cW
includes:
ATW-RC13, ATW-RU13 x2, ATW-T1001,
ATW-T1002
ATW-1302 Handheld System
ATW-1312 /L Lavalier / Handheld System
includes:
ATW-RC13, ATW-RU13, ATW-T1002
includes:
ATW-RC13, ATW-RU13 x2,
ATW-T1001, ATW-T1002, MT830cW
ATW-1311 Dual Body-pack System
ATW-1322 Dual Handheld System
includes:
ATW-RC13, ATW-RU13 x2,
ATW-T1001 x2
includes:
ATW-RC13, ATW-RU13 x2,
ATW-T1002 x2
Receiver
Transmitters
ATW-RC13
Receiver Chassis
(Front View)
ATW-RC13
Receiver Chassis
(Back View)
system
ATW-T1006
Boundary Microphone
Transmitter
ATW-T1007
Microphone Desk
Stand Transmitter
ATW-RU13
Receiver Unit
ATW-T1002
Unidirectional Dynamic Transmitter
AT8690
RU13 Holder
AT8456a
Quiet-Flex® Stand Clamp
ATW-T1001
UniPak® Body-pack
Transmitter
Rack-mount Adapters
Joining Plate
RJ12 Link Cable
Audio-Technica U.S., Inc. 1221 Commerce Drive, Stow, Ohio 44224 (330) 686-2600
audio-technica.com Form No. 0476- 2203- 01 ©2016 Audio-Technica U.S., Inc.
*
Specifications are subject to change without notice.
Fax: (330) 686-0719
E-mail: pro@atus.com
PRO
2.4 GHz Digital High-Fidelity Wireless System
WHY system
system
PRO
2.4 GHz Digital High-Fidelity
Wireless System
PRO ?
Operating Outside TV Bands
Easy To Use
Are you aware that the FCC is scheduled to hold an incentive
Although the System 10 PRO is a powerful, professional wireless
System 10 PRO lets you fit up to four channels in a single (19") rack
auction, expected to start in early 2016, to reclaim additional TV-band
system, the user doesn’t need any kind of technical training to
space. Each System 10 PRO dual-channel chassis takes up half a
linking, this is not recommended. Linking creates a much more
spectrum from current license holders? The FCC will then “repack”
operate it. It is ready to go right out of the box. Adding transmitters
rack space and can be mounted alone using the included mounting
stable environment in which receiver units work together, with all
channels to free contiguous space (a process that may force some
or receiver units to the system is also very simple and is covered
brackets and screws. But two chassis can also be fastened together
receiving, transmitting and frequency allocation coordinated to prevent
broadcasters to move to different channels or go off the air) and
by easy-to-follow instructions in the user manual. System 10 PRO
with the joining plate that comes with each system and mounted
audio dropouts and enable simultaneous use of up to 10 channels.
finally auction off the freed space to the highest bidder. This process
automatically assigns and changes frequencies, so the user doesn’t
together into a single rack space, providing very efficient
will likely lead to even greater congestion in a spectrum that is
need to know anything about available frequencies or how to set
multichannel installation.
already very crowded. One of the reasons we designed System 10
them. This is also beneficial for someone intending to travel with
Latency
their system, since they won’t need to worry about where in the
All digital wireless systems have some latency – it’s unavoidable.
regulatory uncertainty associated with the TV bands. Still, this is
U.S. the system will be used – it will work perfectly fine anywhere.
hardly a sudden pivot for us. Our innovative SpectraPulse ultra
wideband digital wireless system, for example, released in 2007,
System 10 PRO offers full-bandwidth, high-fidelity audio. There is no
chassis, and so on. (The IN connector of the first chassis and the
accepted standards.
analog companding during transmission and reception. System 10
OUT connector of the last chassis in the chain will remain unused.)
on these solutions for a while.
PRO is capable of full-frequency response (20 Hz to 20 kHz),
and better-than-CD audio quality of 24-bit/48 kHz.
units and transmitters in System 10 are actually transceivers that are
constantly communicating with one another. These transceivers allow
System 10 to remain always aware of other 2.4 GHz usage in a given
area, automatically changing frequencies to avoid interference.
dependable, and so automatic, you never have to think about it. Set it up anywhere, turn it on and it’s good to go.
Pairing Multiple Transmitters
to One Receiver Unit
System 10 PRO allows users to pair each receiver unit with multiple
transmitters (up to 10). This can be useful for guitarists and other
musicians who play multiple instruments – they can affix a paired
body-pack transmitter to each instrument, then simply turn the
transmitters off and on to switch instruments. This feature might also
be beneficial for venues, such as houses of worship, where multiple
microphones are used in different locations and/or for different
3 Levels of Diversity Assurance
Like all System 10 products, System 10 PRO provides three levels
applications: even with one receiver unit the user can employ multiple
mics simply by turning one paired mic off and turning another one on.
of diversity assurance: frequency, time, and space. Frequency
Diversity sends the signal on two dynamically allocated frequencies
for interference-free communication. The system is continuously
monitoring the spectrum and can change one or both of the
Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a
frequencies on the fly if interference is encountered. Time Diversity
stable, multichannel system with the simultaneous use of up to 10 channels.
sends the signal in two time slots to maximize immunity to
multipath interference. Space Diversity uses two antennas on each
transmitter and receiver unit to compensate for the inherently
easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time and space.
presentation (e.g., voice or instrument) and the reception and
broadcast of that audio be so slight as to be imperceptible.
both operate in the VHF traveling bands. So we’ve been focusing
its frequency to operate without interference. Both the receiver
Like all the products in the System 10 wireless family, the System 10 PRO rack-mount features 24-bit/48 kHz operation,
Up to five chassis (10 receiver units) can be linked using the RJ12
With 3.8 ms of latency, System 10 PRO performs far better than
System 10’s immediate predecessors, System 8 and System 9,
frequency-agile system capable of continually detecting and adjusting
operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable.
The important thing is that the gap between the original audio
connector of the first chassis to the IN connector of the second
No Analog Audio Compander
While it is certainly true that there’s a lot of activity within the
innovative features for ultimate versatility. The durable half-rack chassis houses two receiver units that can be
Link Function
cable included with each system. The RJ12 cable runs from the OUT
operates well outside the TV bands in the 6-10 GHz range. And
2.4 GHz range – WiFi, microwave ovens, etc. – System 10 is a
System 10 PRO delivers interference-free operation in the 2.4 GHz range (i.e., outside TV bands) with many
While multiple System 10 PRO chassis will work together without
to operate within the 2.4 GHz range was to avoid the congestion and
Why is 2.4 GHz WiFi Band OK?
Audio-Technica’s System 10 PRO rack-mount digital wireless system provides wireless that’s so simple to use, so
Rack Space Efficiency
shorter wavelengths of a 2.4 GHz system, thereby maximizing
signal integrity.
Plays Well With Existing Systems
As previously mentioned, the System 10 PRO continually monitors
activity in the 2.4 GHz range and automatically adjusts its own
frequencies to avoid interference. Thus it works perfectly well,
straight from the box, in environments with a WiFi network. It is also
ideal for adding additional channels on top of an existing TV-band
wireless setup, since System 10 will not cause any intermod or
interference issues when used in tandem with TV-band systems.
Nor will the existing setup need to be reconfigured, as would be the
case if adding additional TV-band wireless.
ANYWHERE WIRELESS
Live Sound (Fixed Installation)
House of Worship
System 10 PRO offers high-fidelity digital audio from a rock-solid
System 10 PRO is easy to install and use. And since each of its
system that’s incredibly easy to set up and operate. This makes it an
receiver units can pair with multiple transmitters, one system will
ideal fit for fixed-installation wireless applications, such as for praise
give a church plenty of flexibility. A pastor can use a body-pack
bands and choirs in houses of worship. No special tech knowledge is
transmitter with a lav mic for most of the service, then switch that
required to install or use the system.
off and turn on a handheld transmitter when interacting with others,
Live Sound (Touring)
Since the System 10 PRO works anywhere in the U.S., automat-
say for taking wedding or baptismal vows. Affordability also makes
the System 10 PRO a wise investment for houses of worship.
ically selecting the best frequencies wherever you take it, it’s a
Boardroom
great choice for touring live-sound applications. Set it up at the new
System 10 PRO’s remote-mounting feature makes it an ideal choice
location, turn it on, and you have dependable, high-fidelity digital
for boardrooms and other meeting spaces. The chassis can be
wireless. Plus, it’s a lightweight system, making it easy to pack up
rack-mounted out of the way in a tech closet with a receiver unit
and transport to your next location.
remote-mounted in the boardroom. Additionally, the system’s
Rental
Because of its versatility, ease of operation and ability to work
capacity for operating without interference in WiFi zones makes
it a dependable choice for any business environment.
automatically anywhere in the U.S., the System 10 PRO is the
Presenter
perfect unit to stock for rentals. It can be rented with confidence
Presenters who travel from place to place want a wireless system
to anyone, anywhere for any wireless application, with no need to
that’s easy to transport, easy to set up and use (without any training
rely on an RF specialist.
or special tech knowledge), is affordable, and provides dependable,
high-fidelity audio. The System 10 PRO satisfies on all accounts.
Transceivers
Education Facility
All of the System 10 PRO receiver units and transmitters are actually
Since System 10 PRO has a low cost per channel, installing multiple
to place, and can be turned on anywhere in the U.S. and provide
transceivers – each sends and receives signals – that stay in
systems is not cost prohibitive. Additionally, System 10 PRO is easy
interference-free digital wireless. It also provides the option for
constant communication with one another. This allows the system
for everyone to use, so educators won’t need to be trained on the
multiple transmitters, so presenters can easily make use of a
to change frequencies whenever needed.
system, but can start using it right away.
separate handheld mic, if desired.
It’s priced to fit the budget of individuals, travels easily from place
WHY system
system
PRO
2.4 GHz Digital High-Fidelity
Wireless System
PRO ?
Operating Outside TV Bands
Easy To Use
Are you aware that the FCC is scheduled to hold an incentive
Although the System 10 PRO is a powerful, professional wireless
System 10 PRO lets you fit up to four channels in a single (19") rack
auction, expected to start in early 2016, to reclaim additional TV-band
system, the user doesn’t need any kind of technical training to
space. Each System 10 PRO dual-channel chassis takes up half a
linking, this is not recommended. Linking creates a much more
spectrum from current license holders? The FCC will then “repack”
operate it. It is ready to go right out of the box. Adding transmitters
rack space and can be mounted alone using the included mounting
stable environment in which receiver units work together, with all
channels to free contiguous space (a process that may force some
or receiver units to the system is also very simple and is covered
brackets and screws. But two chassis can also be fastened together
receiving, transmitting and frequency allocation coordinated to prevent
broadcasters to move to different channels or go off the air) and
by easy-to-follow instructions in the user manual. System 10 PRO
with the joining plate that comes with each system and mounted
audio dropouts and enable simultaneous use of up to 10 channels.
finally auction off the freed space to the highest bidder. This process
automatically assigns and changes frequencies, so the user doesn’t
together into a single rack space, providing very efficient
will likely lead to even greater congestion in a spectrum that is
need to know anything about available frequencies or how to set
multichannel installation.
already very crowded. One of the reasons we designed System 10
them. This is also beneficial for someone intending to travel with
Latency
their system, since they won’t need to worry about where in the
All digital wireless systems have some latency – it’s unavoidable.
regulatory uncertainty associated with the TV bands. Still, this is
U.S. the system will be used – it will work perfectly fine anywhere.
hardly a sudden pivot for us. Our innovative SpectraPulse ultra
wideband digital wireless system, for example, released in 2007,
System 10 PRO offers full-bandwidth, high-fidelity audio. There is no
chassis, and so on. (The IN connector of the first chassis and the
accepted standards.
analog companding during transmission and reception. System 10
OUT connector of the last chassis in the chain will remain unused.)
on these solutions for a while.
PRO is capable of full-frequency response (20 Hz to 20 kHz),
and better-than-CD audio quality of 24-bit/48 kHz.
units and transmitters in System 10 are actually transceivers that are
constantly communicating with one another. These transceivers allow
System 10 to remain always aware of other 2.4 GHz usage in a given
area, automatically changing frequencies to avoid interference.
dependable, and so automatic, you never have to think about it. Set it up anywhere, turn it on and it’s good to go.
Pairing Multiple Transmitters
to One Receiver Unit
System 10 PRO allows users to pair each receiver unit with multiple
transmitters (up to 10). This can be useful for guitarists and other
musicians who play multiple instruments – they can affix a paired
body-pack transmitter to each instrument, then simply turn the
transmitters off and on to switch instruments. This feature might also
be beneficial for venues, such as houses of worship, where multiple
microphones are used in different locations and/or for different
3 Levels of Diversity Assurance
Like all System 10 products, System 10 PRO provides three levels
applications: even with one receiver unit the user can employ multiple
mics simply by turning one paired mic off and turning another one on.
of diversity assurance: frequency, time, and space. Frequency
Diversity sends the signal on two dynamically allocated frequencies
for interference-free communication. The system is continuously
monitoring the spectrum and can change one or both of the
Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a
frequencies on the fly if interference is encountered. Time Diversity
stable, multichannel system with the simultaneous use of up to 10 channels.
sends the signal in two time slots to maximize immunity to
multipath interference. Space Diversity uses two antennas on each
transmitter and receiver unit to compensate for the inherently
easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time and space.
presentation (e.g., voice or instrument) and the reception and
broadcast of that audio be so slight as to be imperceptible.
both operate in the VHF traveling bands. So we’ve been focusing
its frequency to operate without interference. Both the receiver
Like all the products in the System 10 wireless family, the System 10 PRO rack-mount features 24-bit/48 kHz operation,
Up to five chassis (10 receiver units) can be linked using the RJ12
With 3.8 ms of latency, System 10 PRO performs far better than
System 10’s immediate predecessors, System 8 and System 9,
frequency-agile system capable of continually detecting and adjusting
operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable.
The important thing is that the gap between the original audio
connector of the first chassis to the IN connector of the second
No Analog Audio Compander
While it is certainly true that there’s a lot of activity within the
innovative features for ultimate versatility. The durable half-rack chassis houses two receiver units that can be
Link Function
cable included with each system. The RJ12 cable runs from the OUT
operates well outside the TV bands in the 6-10 GHz range. And
2.4 GHz range – WiFi, microwave ovens, etc. – System 10 is a
System 10 PRO delivers interference-free operation in the 2.4 GHz range (i.e., outside TV bands) with many
While multiple System 10 PRO chassis will work together without
to operate within the 2.4 GHz range was to avoid the congestion and
Why is 2.4 GHz WiFi Band OK?
Audio-Technica’s System 10 PRO rack-mount digital wireless system provides wireless that’s so simple to use, so
Rack Space Efficiency
shorter wavelengths of a 2.4 GHz system, thereby maximizing
signal integrity.
Plays Well With Existing Systems
As previously mentioned, the System 10 PRO continually monitors
activity in the 2.4 GHz range and automatically adjusts its own
frequencies to avoid interference. Thus it works perfectly well,
straight from the box, in environments with a WiFi network. It is also
ideal for adding additional channels on top of an existing TV-band
wireless setup, since System 10 will not cause any intermod or
interference issues when used in tandem with TV-band systems.
Nor will the existing setup need to be reconfigured, as would be the
case if adding additional TV-band wireless.
ANYWHERE WIRELESS
Live Sound (Fixed Installation)
House of Worship
System 10 PRO offers high-fidelity digital audio from a rock-solid
System 10 PRO is easy to install and use. And since each of its
system that’s incredibly easy to set up and operate. This makes it an
receiver units can pair with multiple transmitters, one system will
ideal fit for fixed-installation wireless applications, such as for praise
give a church plenty of flexibility. A pastor can use a body-pack
bands and choirs in houses of worship. No special tech knowledge is
transmitter with a lav mic for most of the service, then switch that
required to install or use the system.
off and turn on a handheld transmitter when interacting with others,
Live Sound (Touring)
Since the System 10 PRO works anywhere in the U.S., automat-
say for taking wedding or baptismal vows. Affordability also makes
the System 10 PRO a wise investment for houses of worship.
ically selecting the best frequencies wherever you take it, it’s a
Boardroom
great choice for touring live-sound applications. Set it up at the new
System 10 PRO’s remote-mounting feature makes it an ideal choice
location, turn it on, and you have dependable, high-fidelity digital
for boardrooms and other meeting spaces. The chassis can be
wireless. Plus, it’s a lightweight system, making it easy to pack up
rack-mounted out of the way in a tech closet with a receiver unit
and transport to your next location.
remote-mounted in the boardroom. Additionally, the system’s
Rental
Because of its versatility, ease of operation and ability to work
capacity for operating without interference in WiFi zones makes
it a dependable choice for any business environment.
automatically anywhere in the U.S., the System 10 PRO is the
Presenter
perfect unit to stock for rentals. It can be rented with confidence
Presenters who travel from place to place want a wireless system
to anyone, anywhere for any wireless application, with no need to
that’s easy to transport, easy to set up and use (without any training
rely on an RF specialist.
or special tech knowledge), is affordable, and provides dependable,
high-fidelity audio. The System 10 PRO satisfies on all accounts.
Transceivers
Education Facility
All of the System 10 PRO receiver units and transmitters are actually
Since System 10 PRO has a low cost per channel, installing multiple
to place, and can be turned on anywhere in the U.S. and provide
transceivers – each sends and receives signals – that stay in
systems is not cost prohibitive. Additionally, System 10 PRO is easy
interference-free digital wireless. It also provides the option for
constant communication with one another. This allows the system
for everyone to use, so educators won’t need to be trained on the
multiple transmitters, so presenters can easily make use of a
to change frequencies whenever needed.
system, but can start using it right away.
separate handheld mic, if desired.
It’s priced to fit the budget of individuals, travels easily from place
WHY system
system
PRO
2.4 GHz Digital High-Fidelity
Wireless System
PRO ?
Operating Outside TV Bands
Easy To Use
Are you aware that the FCC is scheduled to hold an incentive
Although the System 10 PRO is a powerful, professional wireless
System 10 PRO lets you fit up to four channels in a single (19") rack
auction, expected to start in early 2016, to reclaim additional TV-band
system, the user doesn’t need any kind of technical training to
space. Each System 10 PRO dual-channel chassis takes up half a
linking, this is not recommended. Linking creates a much more
spectrum from current license holders? The FCC will then “repack”
operate it. It is ready to go right out of the box. Adding transmitters
rack space and can be mounted alone using the included mounting
stable environment in which receiver units work together, with all
channels to free contiguous space (a process that may force some
or receiver units to the system is also very simple and is covered
brackets and screws. But two chassis can also be fastened together
receiving, transmitting and frequency allocation coordinated to prevent
broadcasters to move to different channels or go off the air) and
by easy-to-follow instructions in the user manual. System 10 PRO
with the joining plate that comes with each system and mounted
audio dropouts and enable simultaneous use of up to 10 channels.
finally auction off the freed space to the highest bidder. This process
automatically assigns and changes frequencies, so the user doesn’t
together into a single rack space, providing very efficient
will likely lead to even greater congestion in a spectrum that is
need to know anything about available frequencies or how to set
multichannel installation.
already very crowded. One of the reasons we designed System 10
them. This is also beneficial for someone intending to travel with
Latency
their system, since they won’t need to worry about where in the
All digital wireless systems have some latency – it’s unavoidable.
regulatory uncertainty associated with the TV bands. Still, this is
U.S. the system will be used – it will work perfectly fine anywhere.
hardly a sudden pivot for us. Our innovative SpectraPulse ultra
wideband digital wireless system, for example, released in 2007,
System 10 PRO offers full-bandwidth, high-fidelity audio. There is no
chassis, and so on. (The IN connector of the first chassis and the
accepted standards.
analog companding during transmission and reception. System 10
OUT connector of the last chassis in the chain will remain unused.)
on these solutions for a while.
PRO is capable of full-frequency response (20 Hz to 20 kHz),
and better-than-CD audio quality of 24-bit/48 kHz.
units and transmitters in System 10 are actually transceivers that are
constantly communicating with one another. These transceivers allow
System 10 to remain always aware of other 2.4 GHz usage in a given
area, automatically changing frequencies to avoid interference.
dependable, and so automatic, you never have to think about it. Set it up anywhere, turn it on and it’s good to go.
Pairing Multiple Transmitters
to One Receiver Unit
System 10 PRO allows users to pair each receiver unit with multiple
transmitters (up to 10). This can be useful for guitarists and other
musicians who play multiple instruments – they can affix a paired
body-pack transmitter to each instrument, then simply turn the
transmitters off and on to switch instruments. This feature might also
be beneficial for venues, such as houses of worship, where multiple
microphones are used in different locations and/or for different
3 Levels of Diversity Assurance
Like all System 10 products, System 10 PRO provides three levels
applications: even with one receiver unit the user can employ multiple
mics simply by turning one paired mic off and turning another one on.
of diversity assurance: frequency, time, and space. Frequency
Diversity sends the signal on two dynamically allocated frequencies
for interference-free communication. The system is continuously
monitoring the spectrum and can change one or both of the
Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a
frequencies on the fly if interference is encountered. Time Diversity
stable, multichannel system with the simultaneous use of up to 10 channels.
sends the signal in two time slots to maximize immunity to
multipath interference. Space Diversity uses two antennas on each
transmitter and receiver unit to compensate for the inherently
easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time and space.
presentation (e.g., voice or instrument) and the reception and
broadcast of that audio be so slight as to be imperceptible.
both operate in the VHF traveling bands. So we’ve been focusing
its frequency to operate without interference. Both the receiver
Like all the products in the System 10 wireless family, the System 10 PRO rack-mount features 24-bit/48 kHz operation,
Up to five chassis (10 receiver units) can be linked using the RJ12
With 3.8 ms of latency, System 10 PRO performs far better than
System 10’s immediate predecessors, System 8 and System 9,
frequency-agile system capable of continually detecting and adjusting
operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable.
The important thing is that the gap between the original audio
connector of the first chassis to the IN connector of the second
No Analog Audio Compander
While it is certainly true that there’s a lot of activity within the
innovative features for ultimate versatility. The durable half-rack chassis houses two receiver units that can be
Link Function
cable included with each system. The RJ12 cable runs from the OUT
operates well outside the TV bands in the 6-10 GHz range. And
2.4 GHz range – WiFi, microwave ovens, etc. – System 10 is a
System 10 PRO delivers interference-free operation in the 2.4 GHz range (i.e., outside TV bands) with many
While multiple System 10 PRO chassis will work together without
to operate within the 2.4 GHz range was to avoid the congestion and
Why is 2.4 GHz WiFi Band OK?
Audio-Technica’s System 10 PRO rack-mount digital wireless system provides wireless that’s so simple to use, so
Rack Space Efficiency
shorter wavelengths of a 2.4 GHz system, thereby maximizing
signal integrity.
Plays Well With Existing Systems
As previously mentioned, the System 10 PRO continually monitors
activity in the 2.4 GHz range and automatically adjusts its own
frequencies to avoid interference. Thus it works perfectly well,
straight from the box, in environments with a WiFi network. It is also
ideal for adding additional channels on top of an existing TV-band
wireless setup, since System 10 will not cause any intermod or
interference issues when used in tandem with TV-band systems.
Nor will the existing setup need to be reconfigured, as would be the
case if adding additional TV-band wireless.
ANYWHERE WIRELESS
Live Sound (Fixed Installation)
House of Worship
System 10 PRO offers high-fidelity digital audio from a rock-solid
System 10 PRO is easy to install and use. And since each of its
system that’s incredibly easy to set up and operate. This makes it an
receiver units can pair with multiple transmitters, one system will
ideal fit for fixed-installation wireless applications, such as for praise
give a church plenty of flexibility. A pastor can use a body-pack
bands and choirs in houses of worship. No special tech knowledge is
transmitter with a lav mic for most of the service, then switch that
required to install or use the system.
off and turn on a handheld transmitter when interacting with others,
Live Sound (Touring)
Since the System 10 PRO works anywhere in the U.S., automat-
say for taking wedding or baptismal vows. Affordability also makes
the System 10 PRO a wise investment for houses of worship.
ically selecting the best frequencies wherever you take it, it’s a
Boardroom
great choice for touring live-sound applications. Set it up at the new
System 10 PRO’s remote-mounting feature makes it an ideal choice
location, turn it on, and you have dependable, high-fidelity digital
for boardrooms and other meeting spaces. The chassis can be
wireless. Plus, it’s a lightweight system, making it easy to pack up
rack-mounted out of the way in a tech closet with a receiver unit
and transport to your next location.
remote-mounted in the boardroom. Additionally, the system’s
Rental
Because of its versatility, ease of operation and ability to work
capacity for operating without interference in WiFi zones makes
it a dependable choice for any business environment.
automatically anywhere in the U.S., the System 10 PRO is the
Presenter
perfect unit to stock for rentals. It can be rented with confidence
Presenters who travel from place to place want a wireless system
to anyone, anywhere for any wireless application, with no need to
that’s easy to transport, easy to set up and use (without any training
rely on an RF specialist.
or special tech knowledge), is affordable, and provides dependable,
high-fidelity audio. The System 10 PRO satisfies on all accounts.
Transceivers
Education Facility
All of the System 10 PRO receiver units and transmitters are actually
Since System 10 PRO has a low cost per channel, installing multiple
to place, and can be turned on anywhere in the U.S. and provide
transceivers – each sends and receives signals – that stay in
systems is not cost prohibitive. Additionally, System 10 PRO is easy
interference-free digital wireless. It also provides the option for
constant communication with one another. This allows the system
for everyone to use, so educators won’t need to be trained on the
multiple transmitters, so presenters can easily make use of a
to change frequencies whenever needed.
system, but can start using it right away.
separate handheld mic, if desired.
It’s priced to fit the budget of individuals, travels easily from place
System Configurations
System Components
ATW-1301 Body-pack System
ATW-1311/L Dual Lavalier System
includes:
ATW-RC13, ATW-RU13, ATW-T1001
includes:
ATW-RC13, ATW-RU13 x2, ATW-T1001 x2,
MT830cW x2
ATW-1301/L Lavalier System
ATW-1312 Body-pack / Handheld System
includes:
ATW-RC13, ATW-RU13, ATW-T1001,
MT830cW
includes:
ATW-RC13, ATW-RU13 x2, ATW-T1001,
ATW-T1002
ATW-1302 Handheld System
ATW-1312 /L Lavalier / Handheld System
includes:
ATW-RC13, ATW-RU13, ATW-T1002
includes:
ATW-RC13, ATW-RU13 x2,
ATW-T1001, ATW-T1002, MT830cW
ATW-1311 Dual Body-pack System
ATW-1322 Dual Handheld System
includes:
ATW-RC13, ATW-RU13 x2,
ATW-T1001 x2
includes:
ATW-RC13, ATW-RU13 x2,
ATW-T1002 x2
Receiver
Transmitters
ATW-RC13
Receiver Chassis
(Front View)
ATW-RC13
Receiver Chassis
(Back View)
system
ATW-T1006
Boundary Microphone
Transmitter
ATW-T1007
Microphone Desk
Stand Transmitter
ATW-RU13
Receiver Unit
ATW-T1002
Unidirectional Dynamic Transmitter
AT8690
RU13 Holder
AT8456a
Quiet-Flex® Stand Clamp
ATW-T1001
UniPak® Body-pack
Transmitter
Rack-mount Adapters
Joining Plate
RJ12 Link Cable
Audio-Technica U.S., Inc. 1221 Commerce Drive, Stow, Ohio 44224 (330) 686-2600
audio-technica.com Form No. 0476- 2203- 01 ©2016 Audio-Technica U.S., Inc.
*
Specifications are subject to change without notice.
Fax: (330) 686-0719
E-mail: pro@atus.com
PRO
2.4 GHz Digital High-Fidelity Wireless System
System Configurations
System Components
ATW-1301 Body-pack System
ATW-1311/L Dual Lavalier System
includes:
ATW-RC13, ATW-RU13, ATW-T1001
includes:
ATW-RC13, ATW-RU13 x2, ATW-T1001 x2,
MT830cW x2
ATW-1301/L Lavalier System
ATW-1312 Body-pack / Handheld System
includes:
ATW-RC13, ATW-RU13, ATW-T1001,
MT830cW
includes:
ATW-RC13, ATW-RU13 x2, ATW-T1001,
ATW-T1002
ATW-1302 Handheld System
ATW-1312 /L Lavalier / Handheld System
includes:
ATW-RC13, ATW-RU13, ATW-T1002
includes:
ATW-RC13, ATW-RU13 x2,
ATW-T1001, ATW-T1002, MT830cW
ATW-1311 Dual Body-pack System
ATW-1322 Dual Handheld System
includes:
ATW-RC13, ATW-RU13 x2,
ATW-T1001 x2
includes:
ATW-RC13, ATW-RU13 x2,
ATW-T1002 x2
Receiver
Transmitters
ATW-RC13
Receiver Chassis
(Front View)
ATW-RC13
Receiver Chassis
(Back View)
system
ATW-T1006
Boundary Microphone
Transmitter
ATW-T1007
Microphone Desk
Stand Transmitter
ATW-RU13
Receiver Unit
ATW-T1002
Unidirectional Dynamic Transmitter
AT8690
RU13 Holder
AT8456a
Quiet-Flex® Stand Clamp
ATW-T1001
UniPak® Body-pack
Transmitter
Rack-mount Adapters
Joining Plate
RJ12 Link Cable
Audio-Technica U.S., Inc. 1221 Commerce Drive, Stow, Ohio 44224 (330) 686-2600
audio-technica.com Form No. 0476- 2203- 01 ©2016 Audio-Technica U.S., Inc.
*
Specifications are subject to change without notice.
Fax: (330) 686-0719
E-mail: pro@atus.com
PRO
2.4 GHz Digital High-Fidelity Wireless System