HP ProLiant DL580 Generation 7 (G7)

QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Overview
Front View:
1.
Quick Removal Access Panel
2.
4 Hot Plug Redundant Fans Standard on all models
3.
HP Slim SATA DVD RW Optical Drive standard
4.
Front Panel LED Display and Power Button
5.
Slide-out Systems Insight Display
6.
Two front accessible USB 2.0 ports
7.
One front video port
8.
Quick release levers for fast server access
9.
Front accessible Processor and memory drawer
10. Support for up to four 8-Core Intel® Xeon® Processors
11. Support for up to 8 Small Form-Factor (SFF) SAS, Serial
ATA (SATA) or SSD drives
12. Universal Tool-less "Snap In" Sliding Rail Solution
13. Server Lifting Handles
14. 4U (7" Height) Rack Form Factor
15. Up to 11 slots supported; all full-length/full-height
16. Hot Plug Redundant Power Supplies (2 or 4 depending on
the model)
Rear View:
1.
Power supplies (2 or 4 ship depending on the model)
2.
Integrated Lights-Out 3 port
3.
Mouse port
4.
Serial Port
5.
Gigabit NIC Ports
6.
Gigabit NIC Ports
7.
Gigabit NIC Ports
8.
Gigabit NIC Ports
9.
Video Port
10. Keyboard port
11. PCI-Express or PCI-X option (slots 1-6)
12.
13.
14.
PCI-Express slots (slots 7-11)
Two USB ports
Service tool
At A Glance
The all-new HP ProLiant DL580 G7 combines best-in-class HP performance, manageability, and reliability features with the latest
Intel processor technology and is an ideal choice for mission-critical data center deployments and virtualization environments. DDR3 memory expandable to 1 TB, advanced I/O slot configuration and Intel Xeon 7500 series processors drive performance and
scalability to new levels. The DL580 G7 packs in brand new reliability and availability features like flash-backed write cache,
redundant power supplies and fans and Intel MCA recovery. HP Insight Control along with iLO3 and common slot power supply
simplify and optimize management tasks for greater levels of efficiency and higher TCOs to make sure you get the best return on
your server investment.
Processors:
Processors
Up to Eight-Core Intel® Xeon® 7500 series processors
DA - 13669
North America — Version 1 — June 21, 2010
Page 1
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Overview
Supports up to four Intel® Xeon® 7500 Xeon® processors
New Intel Microarchitecture with Intel Virtualization Technology FlexMigration
Industry Standard Intel® 7500 Chipset with four high-speed interconnects up to 6.4GT/s
Memory:
Memory
PC3-10600R DIMMs (DDR3)
Can be configured in Mirrored, Online Spare, or Advanced ECC modes
Storage Controller:
Controller
High Performance Models: HP Smart Array P410i/1G FBWC controller
Base Models: HP Smart Array P410i/512MB FBWC controller
Internal Drive Support:
Support
Support for up to 8 hot plug SFF SAS/SATA/SSD drives
HP Slim SATA DVD RW Optical Drive standard
Network Controller:
Controller
HP NC375i Quad Port Multifunction Gigabit Server Adapter
Expansion Slots:
Slots
Up to 11 slots supported; all full-length/full-height
Standard: 2 PCI-E 2.0 x8, 3 PCI-E 2.0 x4
USB 2.0 Ports:
Ports
Front: USB (2), video
Rear: USB (2), Video, NIC
Internal: USB (2), SD slot (1)
Redundancy:
Redundancy
Fans: Four Hot Plug redundant fans standard ( 3+1)
Power Supplies: 2 or 4 depending on the model
Infrastructure Management:
Management
Convenient slide-out Systems Insight Display for quick and easy front view server diagnostics, along with status LEDs,
Automatic Server Recovery (ASR), ROM Based Setup Utility (RBSU)
HP Integrated Lights-Out 3 (iLO 3) management processor simplifies server setup, health monitoring and recovery,
power and thermal control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money
by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple
management console. Insight Control supports both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to
continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data
center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's
changing business requirements.
Form Factor:
Factor
Dense form factor - 4U rack models
Operating Systems:
Systems
Supports Windows, RHEL, SLES, OEL, VMware, and Citrix XenServer
Deployment/Serviceability:
Deployment/Serviceability
Front and rear video ports
Front accessible Processor and Memory allow server to stay safely secured in the rack during servicing
Quick Deploy Rail System includes sliding universal rails, an ambidextrous cable management arm and quick release
levers for fast and easy serviceability and in-rack tool-less access to major components
Tool-less access to all system components for easy in rack serviceability
Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for
greater flexibility in performing defective parts replacement
Warranty:
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
DA - 13669
North America — Version 1 — June 21, 2010
Page 2
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Overview
warranty services are available through HP Care Pack services or customized service agreements. Hard drives have
either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response.
Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two
categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but
may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13669
North America — Version 1 — June 21, 2010
Page 3
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processor
Eight-Core Processors
One or more of the
Intel® Xeon® X7560 Processor (2.27GHz, 24MB cache, 130W)
following depending on
Intel® Xeon® X7550 Processor (2.00GHz, 18MB cache, 130W)
model
Intel® Xeon® L7555 Processor (1.86GHz, 24MB cache, 95W)
Six-Core Processors
Intel® Xeon® E7540 Processor (2.00GHz, 18MB cache, 105W)
Intel® Xeon® E7530 Processor (1.86GHz, 12MB cache, 105W)
Intel® Xeon® X7542 Processor (2.67GHz, 12MB cache, 130W)
Quad-Core Processors
Intel® Xeon® E7520 Processor (1.86GHz, 18MB cache, 95W)
Chipset
Industry Standard Intel® 7500 Chipset
NOTE: For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
Memory Protection
Advanced ECC
Mirrored Memory
Online Spare Memory
Memory
One of the following
depending on Model
Type
Standard
(2P Models)
Standard
(4P Model - E7540)
Standard
(4P Models - X7560,
X7550)
Maximum
Network Controller
PC3-10600R DIMMs (DDR3)
16GB (4 x 4GB)
32GB (8 x 4GB)
64GB (16 x 4GB)
1TB (64 x 16GB)
HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
NOTE: Optional Dual Port 10GbE upgrade (replaces two 1G ports)
Expansion Slots
Expansion
Slots (Main IO Expansion Slot
Board
#
standard)
1
2
Technology
Width
Connector
Width*
Width
Bus / Dev
Number**
Number
Form Factor
Notes
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
DA - 13669
North America — Version 1 — June 21, 2010
Page 4
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Standard Features
3
4
5
6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
PCI Express
7
x4
x8
0/0A
FH/FL
Gen2
PCI Express
8
x4
x8
0/09
FH/FL
Gen2
PCI Express
9
x8
x16
0/07
FH/FL
Gen2
PCI Express
10
x4
x8
0/01
FH/FL
Gen2
PCI Express
11
x8
x16
0/05
FH/FL
Gen2
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the
lowest bus).
FL= Full length; FH = Full height; LP = low-profile.
Expansion Slots
Expansion
Slots with
IO Expander
Expansion Slot
(combination
#
PCI-X, PCI-e
and 300W
GPU
1
2
3
4
5
6
7
8
9
10
11
Technology
Width
Connector
Width*
Width
Bus / Dev
Number**
Number
Form Factor
Notes
PCI-X
PCI-X
PCI Express
Gen2
PCI Express
Gen2
N/A
PCI Express
Gen2
PCI Express
Gen2
PCI Express
Gen2
PCI Express
Gen2
PCI Express
Gen2
PCI Express
Gen2
64-bit
64-bit
N/A
N/A
82/01
82/02
FH/FL
FH/FL
100MHz
100MHz
x16
x16
80/07
FH/FL
x4
x8
80/01
FH/FL
N/A
N/A
N/A
N/A
x16
x16
80/03
FH/FL
x4
x8
0/0A
FH/FL
x4
x8
0/09
FH/FL
x8
x16
0/07
FH/FL
x4
x8
0/01
FH/FL
x8
x16
0/05
FH/FL
DA - 13669
North America — Version 1 — June 21, 2010
N/A
Page 5
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Standard Features
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the
lowest bus).
FL= Full length; FH = Full height; LP = low-profile.
Expansion Slots
Expansion
Slots with
Expansion Slot
I/O Expander
#
(standard PCIe option)
Technology
Width
Connector
Width*
Width
Bus / Dev
Number**
Number
Form Factor
Notes
PCI Express
x4
x8
80/00
FH/FL
Gen1
PCI Express
2
x8
x16
80/09
FH/FL
Gen2
PCI Express
3
x8
x16
80/07
FH/FL
Gen2
PCI Express
4
x4
x8
80/01
FH/FL
Gen2
PCI Express
5
x8
x16
80/05
FH/FL
Gen2
PCI Express
6
x8
x16
80/03
FH/FL
Gen2
PCI Express
7
x4
x8
0/0A
FH/FL
Gen2
PCI Express
8
x4
x8
0/09
FH/FL
Gen2
PCI Express
9
x8
x16
0/07
FH/FL
Gen2
PCI Express
10
x4
x8
0/01
FH/FL
Gen2
PCI Express
11
x8
x16
0/05
FH/FL
Gen2
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the
lowest bus).
FL= Full length; FH = Full height; LP = low-profile.
1
Storage Controller
One of the following
depending on Model
Base Models
HP Smart Array P410i/512 MB FBWC Controller
High Performance Models HP Smart Array P410i/1G FBWC Controller
DA - 13669
North America — Version 1 — June 21, 2010
Page 6
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Standard Features
Storage Data Protection
The Flash Backed Write Cache (FBWC) increases cache data retention capabilities from two days of
existing battery backed write cache (BBWC) to infinite.
Standard on all Models
Transportable data protection
Increases overall controller performance
Storage
Optical Drive
Hard Drives
Hard Disk Drive
Backplane
HP Slim SATA DVD RW Optical Drive standard
None ship standard
Internal SAS backplane supports up to eight SFF hard disk drives.
Maximum Internal
Storage Type
Hot Plug SFF SAS
Hot Plug SFF SATA
4.0TB
4.0TB
Interfaces
Serial
Pointing Device (Mouse)
Video
Keyboard
USB 2.0 Ports
1
1
1 front; 1 rear
1
6 total: 2 front; 2 rear; 2 internal
NOTE: Please see the following URL for additional information regarding
USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html
1
iLO 3 Remote
Management
Network RJ-45
8 x 500GB
8 x 500GB
2
Graphics
Integrated ATI ES1000 with 64MB embedded video SDRAM
Max Resolution 1280 x 1024 x 16M color
Form Factor
Rack (4U = 7 inches), ships with Quick Deploy Sliding Rail System, an ambidextrous cable management
arm and quick release levers for fast and easy serviceability and in-rack tool-less access to major
components.
Space saving form factor (4U) provides space efficiencies while providing maximum deployment
flexibility.
HP Insight management
software
HP Insight Foundation
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex
Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
DA - 13669
North America — Version 1 — June 21, 2010
Page 7
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Standard Features
efficiency and highly reliable systems: www.hp.com/go/foundation.
The foundation pack includes:
HP SmartStart
HP Management
HP ProLiant Firmware Maintenance
HP Integrated Lights-Out
(iLO)
HP Insight Control
SmartStart version supported (minimum): SmartStart 8.50
http://www.hp.com/servers/smartstart
HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring,
power and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP iLO functions without additional software and
can be accessed from any location via a web browser. HP iLO works handin-hand with HP Systems Insight Manager, Insight Control and Insight
Dynamics for ProLiant, helping customers unleash the value of the ProLiant
platform and deliver the highest possible quality of IT service. For more
information, visit: www.hp.com/go/iLO
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console.
Two versions of Insight Control are available, to serve environments requiring
either a Linux-based or a Windows-based central management server: HP
Insight Control for Linux, and HP Insight Control. See
www.hp.com/go/insightcontrol
HP Insight Dynamics for
ProLiant
DA - 13669
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff and
proactive delivery of software updates. For more information about this
service, please visit: http://www.hp.com/services/insight.
HP Insight Dynamics for ProLiant, a product option, is advanced
infrastructure management software that enables IT staff to instantly adjust
their environments to meet dynamic business demands by provisioning,
optimizing and protecting complex infrastructure in minutes. It's a powerful
toolkit, integrated-by-design, that accelerates complex technology projects
and simplifies daily operations, transforming data center economics. With
Insight Dynamics IT professionals can plan capacity and power continuously,
balance workloads across physical and virtual resources, and ensure costeffective high availability. It also enables IT organizations to provision
infrastructure consistently and automatically from pools of shared resources
using a self-service portal. Resources provisioned can range from a single
virtual machine to complex multi-tier environments and their associated
physical and virtual resource requirements. In addition to the previous
functional benefits, it also provides a cost-effective disaster recovery for
physical and virtual environments that works with HP StorageWorks
Continuous Access software for both the Enterprise Virtual Array and the XP
storage array allowing application environments to be reactivated in minutes
with the touch of a button to a remote location.
North America — Version 1 — June 21, 2010
Page 8
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Standard Features
NOTE: For more information, visit:
http://www.hp.com/go/insightdynamics
Industry Standard
Compliance
ACPI 2.0. Compliant
PCIE 1.0a Compliant
PXE Support
WOL Support
Physical Address Extension (PAE) Support
Microsoft® Logo certifications
USB 2.0 Support
Intelligent Manageability HP Systems Insight Manager
SmartStart
Redundant ROM
Remote Flash ROM
Management Agents
Integrated Management Log (IML)
Automatic Server Recovery-2 (ASR-2)
ROM-Based Setup Utility (RBSU)
Dynamic Sector Repairing (with Smart Array Controllers)
Drive Parameter Tracking (with Smart Array Controllers)
Pre-Failure Warranty (covers processors, SAS hard drives and memory)
Redundant/adaptive load balancing NIC Support
Hot Spare Boot
NOTE: Upon the event of a failed processor in a multi-processing environment, the system will
automatically reboot and use the remaining good processor(s).
Availability
HP Advanced Memory Protection Technology - delivers unsurpassed memory protection and server
availability with the following supported modes of operation:
Advanced ECC
Advanced ECC Memory is the default memory protection mode for the HP ProLiant DL580 G7. In
Advanced ECC, the server is protected against correctable memory errors. The server will provide
notification if the level of correctable errors exceeds a predefined threshold rate. The server does
not fail because of correctable memory errors.
Advanced ECC provides additional protection over Standard ECC in that it is possible to correct
certain memory errors that would otherwise be uncorrectable and result in server failure. Whereas
Standard ECC can correct single-bit memory errors, Advanced ECC can correct single-bit and
some multi-bit memory errors.
Online Spare Memory
Offers a higher level of memory protection than Advanced ECC alone. If the number of single-bit
correctable errors on a rank exceeds the pre-defined error threshold, that rank will fail over to the
online spare rank without intervention or server interruption. The failed memory can then be
replaced at the user's convenience during a scheduled maintenance window.
Online Spare Memory is achieved by protecting active memory with online spare memory on the
same memory board. No operating system support is required.
DA - 13669
North America — Version 1 — June 21, 2010
Page 9
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Standard Features
Mirrored Memory
Mirrored Memory provides a higher level of availability than Advanced ECC and Online Spare
Memory. With Mirrored Memory, the server is protected against uncorrectable memory errors that
would otherwise result in server failure. Mirrored Memory allows the server to keep two copies of
all memory data. If an uncorrectable error is encountered, the proper data is retrieved from the
copy of memory that did not fail.
Smart Array P410i Controller with optional Flash Backed Write Cache (FBWC) Enabler provides
transportable data protection and increases overall controller performance. Up to 1G Flash
Backed Write Cache protection optional on HP ProLiant DL580 G7 (1G FBWC ships standard
with 4P Models).
Hot Plug Redundant Fans - Four Hot Plug Redundant Fans ship standard with all models.
Front Accessible Chassis - Redesigned chassis allows access to memory, processors and hard
drives from the front of the server while it remains safely engaged in the rack. This provides easier
serviceability and lowers the chance of interfering with neighboring servers' cables and
components.
Hot Plug Universal Drives - Up to 8 Hot Plug Universal SFF SAS drives are supported.
Hot Plug Redundant Power Supplies - Four Hot Plug Redundant Power Supplies ship standard with
all 4P Models (Hot Plug Redundant Power Supplies are optional with 2P models).
Serviceability
Security
Front and Rear accessibility provides unsurpassed serviceability by allowing the server to remain
safely secured in the rack while maintaining Hot Plug Universal Hard Drives, Hot Plug Redundant
Power Supplies, Memory, as well as Processors.
Innovative Diagnostic Lighting
Systems Insight Display - precisely depicts all major subsystems of the server (Processors, Memory,
CPU, Fans, circuit board Interlock, over-temperature status) and gives instant visual indication of
fault status.
Tool-less interior design
Tool-less access to interior of server
Rear Access to Hot Plug Redundant Power Supplies
PCI Card Guides locks full length PCI cards in place
Four individually removable fans connect without cables to the system board
Processor Retention Cage securely locks Processors into their sockets
Tool-less removal of system board
Quick Deploy Rails
Tool-less design "snap in" rail and ambidextrous cable management arm
Power-on password
Keyboard password
External USB port enable/disable
Network Server Mode
Serial interface control
Administrator's password
Removable CD-ROM or DVD drive
DA - 13669
North America — Version 1 — June 21, 2010
Page 10
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Standard Features
Security Trusted Platform The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to
Module
authenticate the server platform. These artifacts can include passwords, certificates and encryption keys.
Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module
(TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server
running Windows Server 2008 has not been tampered with while the system was offline. For more
information about TPM, including a white paper, go to: www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing
the key could result in data loss.
Server Power Cords
NOTE: If customers require a local power cord, they can check the power cord matrix for the
appropriate sku. Please see the following power cord matrix for details:
http://www.hp.com/go/powercordmatrix
Power Supply
1200W AC Power Supply
NOTE: Two Hot Plug Power Supplies ships standard with 2P Models. Four Hot Plug Power Supplies ship
standard with 4P Models.
Power Supply Requirement Override
NOTE: The HP ProLiant DL580 G7 does an inventory of the system configuration to determine what
level of redundancy the power supply configuration supports based on some configuration assumptions.
The level of redundancy will be reported during the system power on. For planning purposes you can use
the Power Advisor (www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor) which
is more accurate to determine the power requirements. Also, there is an RBSU override switch capability
that allows the user to override the base setting if the Power Advisor indicates redundancy with their
configuration.
UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under
Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements,
and specifications for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
System Fans
Four Hot Plug redundant fans standard (3+1)
Required Cabling
For required cabling information, refer to the HP Web site at: www.hp.com/servers/dl580.
DA - 13669
North America — Version 1 — June 21, 2010
Page 11
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Standard Features
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Enterprise Linux (OEL)
VMware
Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page www.hp.com/support/DL580G7
Rack Airflow
Requirements
Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
allow 830 square inches (5,350 sq cm) of holes evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be
a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD
provided with the server, or to the server documentation located in the Support section at the following
URL: http://www.hp.com/servers/dl580.
Rack Kit
Quick deploy rail system provides tool-free support for racks with square or round mounting holes
(including Compaq/HP 7000, 9000, 10000 G2 and HP series), with an adjustment range of 24" - 36".
The ambidextrous cable management arm can be mounted on either the left or right side for improved
cable management.
NOTE: Cable management arm must be removed to access Hot Plug Power Supplies when the cable
management arm is mounted on the right.
Telco Rack Support
Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit
from Rack Solutions at: http://www.hp.com/go/rackandpower.
DA - 13669
North America — Version 1 — June 21, 2010
Page 12
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Standard Features
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
valued customers. If you require "custom" rack configuration, please contact HP's Customer Business
Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator.
Solutions
The ProLiant DL580 G7 server is an enterprise class, 4 socket server designed for maximum scalability
and high availability. Its innovative chassis offers unsurpassed flexibility and serviceability in a versatile
form factor. Based upon the latest industry standard processing, memory, I/O and networking
technologies, the ProLiant DL580 G7 provides the highest levels of performance demanded by today's
compute intensive applications. Unparalleled high availability features, including hot-plug and
redundant components, guarantee maximum uptime. HP Integrated Lights-Out 3 (iLO3) technology
allows remote administration from a standard web browser without ever having to visit the server. Within
the 4U dense form factor, it's highly expandable architecture provides maximum application deployment
flexibility with the ability to add PCI-Express, PCI-X, 2 - 10GB NICs and battery-backed write cache
options. Innovative features, such as the ability to access processors, memory, hard drives, and power
supplies while the unit remains secured in the rack, enable rapid response to service events, radically
decreasing overall IT costs and server downtime.
Typical Usage:
Usage
Space-constrained corporate data centers and service providers
Network and I/O expandability, inbuilt availability and reliability features, advanced power management
capabilities and large internal storage make DL580 G7 ideal for corporate datacenters.
Database, Messaging and Business Applications
Large internal storage, refined I/O slots options, high network bandwidth, new DDR3 expandable
memory combined with latest Intel 8-core expandable processors in DL580 G7 provide everything
necessary for today's database, messaging and business applications.
Virtualization and Consolidation
HP's 4S architecture, inbuilt advanced reliability and scalability features make DL580 G7 a perfect
platform for virtualization and consolidation solutions. HP's Insight control offerings make it easy to
manage, deploy and migrate virtualized servers with VMware or Microsoft® Virtual Server. For more
solutions visit: http://www.hp.com/solutions/proliantdl580.
DA - 13669
North America — Version 1 — June 21, 2010
Page 13
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Service and Support
Service and Support
For increased uptime, productivity and ROI - HP Care Pack packaged services for Servers
These days, you need to get the most out of your server investment - you can't afford not to. When you
buy HP server products and solutions, it's also a good time to think about what levels of service and
support you may need. To help take the worry out of deploying, designing, maintaining, and managing
your environment, we've designed a portfolio of service options that are as: flexible, reliable and scalable
as your server. Unlike server-only vendors, we take a holistic approach to your entire environment,
bridging storage, servers, blades, software and network infrastructures with our HP Care Pack packaged
services for Servers.
Protect your business beyond the warranty
When it comes to robustness and reliability, standard warranties on today's computing equipment have
matured just as the technologies have matured. Good news on some fronts - but also a source of
potential problems and subsequent consequences that come from depending on standard warranties
alone. Standard warranty protects against product defects and some causes of downtime - but not the
business. By using a standard approach to warranty uplifts, such as HP Care Pack Services, you can
reduce downtime risks and be more certain of operational consistency for both mission-critical and
standard business computing. Simply put, HP Care Pack Services normalize the warranty of combined
products - helping you proactively guard against unplanned downtime.
Extending warranties with HP Care Pack Services
For cost-effective upgrading or extending your standard warranty, HP Care Pack Services offer a suite of
standard reactive hardware and software support services that are sold separately, or combined as with
our Support Plus and Support Plus 24 services. The portfolio also provides a combination of proactive
and reactive services, such as Proactive 24 Service and Critical Service. In addition, with HP Proactive
Select we offer an innovative approach to service delivery that gives you the flexibility to acquire the
specific proactive services you need today, then add services as your needs evolve. HP Proactive Select
offers a broad set of technical or per-event type service options - including server, storage, and network,
SAN device, and software, environment, installation and education services. Services that you can mix
and match depending on your specific requirements, from preliminary planning and equipment delivery
to installation, configuration, integration, and testing, through every level of ongoing support. Our HP
Care Pack packaged services for Servers assures help when you need it most. And for many products,
post-warranty HP Care Pack Services are available when your original warranty has expired.
HP Server Services: Offering reliability, flexibility and value - just like your storage
HP Server Services offers a full spectrum of customer care, from technology support to complex
migrations to complete completely managed services. HP Factory Express provides customization,
integration and deployment services for turnkey solutions. HP Education offers flexible, comprehensive
training on server networking and server software to help your IT staff get the most out of your
investments. And HP Financial solutions extend innovative financing and asset management programs to
cost-effective buy, manage and eventually retire your older equipment.
HP Server Services, the trusted business technology experts who manage your technology in action,
because when technology works, business works. http://www.hp.com/services/servers,
http://www.hp.com/services/storage
NOTE: Care Pack Services availability may vary by product and country.
DA - 13669
North America — Version 1 — June 21, 2010
Page 14
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Service and Support
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using HP order
configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at:
http://www.hp.com/go/lookuptool
Recommended HP Care Pack Services for optimal satisfaction with your HP product.
Recommended Services
Hardware Support - 3-Year HP 24x7 6-hour call to repair Care Pack
3-Year HP 24x7 6-hour call to repair Care Pack - This cost-effective service helps you minimize system
downtime due to hardware failure. It features a commitment to resolve hardware problems within 6
hours from the time your service call is received. (Please note repair-time restrictions below.)
When you experience system problems, your call is immediately connected to an HP-certified resolution
engineer for troubleshooting. If your problem cannot be resolved remotely, an experienced support
professional is dispatched to your site to begin hardware repair activities.
Service feature highlights
Remote monitoring and problem diagnosis and support
Onsite hardware support
6-hour call-to-repair time commitment
Materials included
Enhanced parts inventory management
24x7 coverage window
Work to completion
Escalation management
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
Hardware Support - 3 - Years 24x7 24 hour Call-to-Repair
3-Year HP 24x7 24-hour call to repair Care Pack - This cost-effective service helps you minimize system
downtime due to hardware failure. It features a commitment to resolve hardware problems within 6
hours from the time your service call is received. (Please note repair-time restrictions below.)
When you experience system problems, your call is immediately connected to an HP-certified resolution
engineer for troubleshooting. If your problem cannot be resolved remotely, an experienced support
professional is dispatched to your site to begin hardware repair activities.
ProLiant Servers Installation and Startup Service
HP Installation and Startup of HP ProLiant Servers provides for the installation of your new HP ProLiant
server and operating system. This will assist you in bringing your new HP ProLiant server and operating
system into operation in a timely and professional manner.
Service benefits
This service provides a trained HP service specialist to perform an installation that meets HP quality
standards, for:
DA - 13669
North America — Version 1 — June 21, 2010
Page 15
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Service and Support
Delivery of the service at a mutually scheduled time convenient to your organization
Availability of an HP service specialist to answer basic questions during the onsite delivery of this
service
Custom installation as detailed in "Delivery specifications" or in a Statement of Work (SOW)
Verification prior to installation that all service prerequisites are met
Service benefits
This service provides a trained HP service specialist to perform an installation that meets HP quality
standards, for:
Delivery of the service at a mutually scheduled time convenient to your organization
Availability of an HP service specialist to answer basic questions during the onsite delivery of this
service
Custom installation as detailed in "Delivery specifications" or in a Statement of Work (SOW)
Verification prior to installation that all service prerequisites are met
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982?7572ENN
Optional HP Care Pack Services that will enhance your HP product experience.
Optional Services
3-Year HP Support Plus 24 Service Care Pack
As an alternative to our recommended support level, for customers who need access to responsive 24x7
hardware and software support plus software updates on HP and selected third party products:
HP Support Plus 24 helps you increase performance and availability with comprehensive, consistent
hardware and software services. Working with your IT team, HP Services engineers deliver onsite
hardware support and over-the-phone software support around-the-clock 365 days per year. Service
coverage encompasses HP products and selected multi-vendor hardware and software.
In addition, this convenient HP Care Pack packaged service makes software updates available to you at
substantial savings.
Choose Support Plus 24 when you need to:
Improve uptime with responsive hardware and software services available anytime
Cost-effectively obtain expert 24x7 multi-vendor hardware and software support
Enjoy consistent service coverage across geographically dispersed sites
Update HP and selected third-party software at a predictable cost
Take advantage of subscription savings on software updates
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6638EEE
3 Year HP Proactive 24
As an alternative to our recommended support level, for customers who want enhanced operational
effectiveness and proactive problem identification:
HP Proactive 24 Service (P24) integrates hardware and software support to help you improve the stability
and operational effectiveness of your IT environment. An HP Account Manager acts as your primary
point of contact to ensure that HP meets your support needs effectively.
DA - 13669
North America — Version 1 — June 21, 2010
Page 16
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Service and Support
P24 provides the maximum value when multiple technologies in the environment (e.g. servers, storage,
SAN and the network), are all covered. It provides an environment-wide view and consistent support of
all of these components which affect stability of your key applications.
Choose P24 when you want to:
enhance operational effectiveness with proactive problem identification and recommendations
from HP
partner with technical experts who help coordinate support, provide hands-on assistance, and
share knowledge with your staff
rapidly access support and expertise spanning your environment
obtain personalized services tailored to your business environment and critical success factors
anticipate necessary change - and execute it correctly the first time
efficiently manage infrastructure resources to meet your performance objectives
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-1614ENUC
Hardware Support - 3-Year, 24x7 Same-Business-Day, On-site. 4-Hour response coverage
As an alternative to our recommended support level, for customers who need same day response service
level 24x7.
3-Year, 24x7 Same-Business-Day, On-site. 4-Hour response coverage provides high-quality remote
assistance and onsite support for
your covered hardware, helping you to improve product uptime. You have the flexibility to choose
between different service-level options featuring different response times and coverage windows, as well
as between several coverage periods to address your specific service needs.
Service benefits
Help improve or maintain system uptime
Convenient onsite support
Reliable response times
Service feature highlights
Remote problem diagnosis and support
Onsite hardware support
Materials included
Service-level options with different coverage windows and response times
Work to completion
Escalation management
Access to electronic support information and services
HP electronic remote monitoring and support solution (for eligible products only)
Optional Defective Media Retention Service
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
DA - 13669
North America — Version 1 — June 21, 2010
Page 17
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Service and Support
eSupport
HP eSupport is a portfolio of technology-based services that assist you with managing your business
environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you need to
manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access the support
portal, visit: http://www.hp.com/support
HP Insight Remote Support software delivers secure remote support for your HP Servers and Storage, 24
X 7, so you can spend less time solving problems and more time focused on your business. You can
have your systems remotely monitored for hardware failure using secure technology that's been proven at
thousands of companies around the world. In many cases, you can avoid problems before they occur.
DA - 13669
North America — Version 1 — June 21, 2010
Page 18
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Models
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
(4) Intel® Xeon® X7560 Processor (2.27GHz, 24MB cache, 130W)
HP DL580 G7 High
Processor(s)
Performance Models
Four of the following
(4) Intel® Xeon® X7550 Processor (2.00GHz, 18MB cache, 130W)
depending on model
(4) Intel® Xeon® E7540 Processor (2.00GHz, 18MB cache, 105W)
HP ProLiant DL580 G7
64GB PC3-10600R DIMMs (DDR3) (X7560, X7550 Models)
Memory
X7560 Server
One of the following
32GB PC3-10600R DIMMs (DDR3) (E7540 Models)
584084-001
depending on model
HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
Network Controller
HP ProLiant DL580 G7
HP Smart Array P410i/1G FBWC Controller
Storage Controller
X7550 Server
584085-001
HP Integrated Lights-Out 3 (iLO 3) management processor: Integrated on
Manageability
system board
HP ProLiant DL580 G7
None ship standard
Hard Drives
E7540 Server
4TB max
Internal Storage
584086-001
Four 1200W Power Supplies standard
Power Supplies
HP Slim SATA DVD RW Optical Drive
Optical Drive
Rack 4U
Form Factor
HP DL580 G7 Base
Models
HP ProLiant DL580 G7
E7530 Server
584087-001
HP ProLiant DL580 G7
E7520 Server
595241-001
Processor(s)
Two of the following
depending on model
Up to 4 supported
Memory
Network Controller
Storage Controller
Manageability
Hard Drives
Internal Storage
Power Supplies
Optical Drive
Form Factor
DA - 13669
(2) Intel® Xeon® E7530 Processor (1.86GHz, 12MB cache, 105W)
(2) Intel® Xeon® E7520 Processor (1.86GHz, 18MB cache, 95W)
16GB PC3-10600R DIMMs (DDR3)
HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
HP Smart Array P410i/512 MB FBWC Controller
HP Integrated Lights-Out 3 (iLO 3)management processor: Integrated on
system board
None ship standard
4TB max
Two 1200W power supplies standard
HP Slim SATA DVD RW Optical Drive
Rack 4U
North America — Version 1 — June 21, 2010
Page 19
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start
with a CTO Chassis.
NOTE: FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Configuration
HP Models
HP DL580R07 CTO Chassis
Factory Integrated Model ships with:
HP NC375i Integrated Quad Port Multifunction Gigabit Server Adapter
Two HP DL580G7 Memory Boards
Five standard PCI-express slots
HP Smart Array P410i Controller
Four redundant hot-plug fans
SFF SAS/SATA/SSD drive cage
HP Integrated Lights-Out 3 (iLO 3) management processor: integrated on system
board
Rack (4U), 7-inch
588857-B21
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HP Processors
HP Memory
NOTE: If more than two processors are desired, select one xxxxxx-L21 and additional
processors would be xxxxxx-B21. Up to four processors supported.
NOTE: For each additional processor selected, one memory board (P/N: 588141B21) must be selected.
Eight-Core Processors
Intel Xeon Processor Model X7560 (2.27GHz, 24MB cache, 130W), 2P FIO Kit
Intel Xeon Processor Model X7550 (2.00GHz, 18MB cache, 130W), 2P FIO Kit
Intel Xeon Processor Model L7555 (1.86GHz, 24MB cache, 95W), 2P FIO Kit
Six-Core Processors
Intel Xeon Processor Model E7540 (2.00GHz, 18MB cache, 105W), 2P FIO Kit
Intel Xeon Processor Model E7530 (1.86GHz, 12MB cache, 105W), 2P FIO Kit
Intel Xeon Processor Model X7542 (2.67GHz, 12MB cache, 130W), 2P FIO Kit
Quad-Core Processors
Intel Xeon Processor Model E7520 (1.86GHz, 18MB cache, 95W), 2P FIO Kit
Registered DIMMs (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
DA - 13669
North America — Version 1 — June 21, 2010
588143-L21
588145-L21
588154-L21
588150-L21
588152-L21
588156-L21
595245-L21
500656-B21
500658-B21
500662-B21
Page 20
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Configuration Information - Factory Integrated Models
HP Power Supplies
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
NOTE: A minimum of four memory kits must be selected on 2P models.
HP 1200W CS HE Power Supply Kit
NOTE: Option Kit contains optional power supply, an IEC power cable and PDU IEC
cables. Must be ordered in pairs.
NOTE: The HP ProLiant DL580 G7 does an inventory of the system configuration to
determine what level of redundancy the power supply configuration supports based on
some configuration assumptions. The level of redundancy will be reported during the
system power on. For planning purposes you can use the Power Advisor
(www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor) which
is more accurate to determine the power requirements. Also, there is an RBSU
override switch capability that allows the user to override the base setting if the Power
Advisor indicates redundancy with their configuration.
500666-B21
500172-B21
Step 3: Choose Additional Factory Integratable Options
HP Insight Software
HP Insight Control, No Media 1-Server License Factory-Integratable Option (FIO)
including 1 year of 24x7 Technical Support and Updates
HP Insight Control for Linux, No Media 1-Server License Factory-Integratable Option
(FIO) including 1 year of 24x7 Technical Support and Updates
582765-B21
TC203A
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below.
DA - 13669
North America — Version 1 — June 21, 2010
Page 21
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Core Options
NOTE: Some options may not be integrated at the factory. Contact your local sales representative for additional information.
DL580G7 PCI Express I/O Exp. Kit
588137-B21
HP Unique Options
NOTE: Adds four PCI-E 2.0 x8, one PCI-E 2.0 x4 and one PCI-E 1.1 x4.
DL580G7 PCI-X / PCI Express I/O Exp. Kit
588139-B21
NOTE: Adds two PCI-E 2.0 x16, one PCI-E 2.0 x4 and two PCI-X.
HP DL580G7 Memory Board
588141-B21
HP Processors
Eight-Core Processors
Intel Xeon Processor Model X7560 (2.27GHz, 24MB cache, 130W)
Intel Xeon Processor Model X7550 (2.00GHz, 18MB cache, 130W)
Intel Xeon Processor Model L7555 (1.86GHz, 24MB cache, 95W)
Six-Core Processors
Intel Xeon Processor Model E7540 (2.00GHz, 18MB cache, 105W)
Intel Xeon Processor Model E7530 (1.86GHz, 12MB cache, 105W)
Intel Xeon Processor Model X7542 (2.67GHz, 12MB cache, 130W)
Quad-Core Processors
Intel Xeon Processor Model E7520 (1.86GHz, 18MB cache, 95W)
NOTE: Above processor kits contain one processor each.
HP Memory
HP Optical Drives
Registered DIMMs (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Memory Board Upgrade Option
HP DL580G7 Memory Board
NOTE: a maximum of 8 memory boards are supported in the server.
HP Slim SATA DVD-ROM Optical Drive
HP Slim SATA DVD RW Optical Drive
DA - 13669
North America — Version 1 — June 21, 2010
588143-B21
588145-B21
588154-B21
588150-B21
588152-B21
588156-B21
595245-B21
500656-B21
500658-B21
500662-B21
500666-B21
588141-B21
481041-B21
481043-B21
Page 22
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Core Options
HP Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 146GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 72GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 72GB 3G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard
Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/12244_na/12244_na.html
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
HP 160GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13121_na/13121_na.html
SATA Hot Plug Midline (MDL) Solid State Drives
HP 60GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive
HP 120GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html
DA - 13669
North America — Version 1 — June 21, 2010
507127-B21
512547-B21
507125-B21
512545-B21
418371-B21
507610-B21
507750-B21
530888-B21
572071-B21
572073-B21
Page 23
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Core Options
HP Networking
HP I/O Expansion
Options
HP Power Supplies
Gigabit Ethernet Adapters
HP NC112T PCIe Gigabit Server Adapter
HP NC360T PCI Express Dual Port Gigabit Server Adapter
HP NC365T 4-port Ethernet Server Adapter
HP NC373F PCI Express Multifunction Gigabit Server Adapter
HP NC373T PCI Express Multifunction Gigabit Server Adapter
HP NC375T PCI Express Quad Port Gigabit Server Adapter
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
10 Gigabit Ethernet Adapters
NOTE: No more than two 10GbE I/O devices are supported in a single ProLiant
server.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and
cables for fiber-optic environments must be purchased separately.
HP NC522SFP Dual Port 10GbE Server Adapter
HP NC524SFP Dual Port 10GbE Server Adapter
HP NC550SFP Dual Port 10GbE Server Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs
503746-B21
412648-B21
593722-B21
394793-B21
394791-B21
538696-B21
458492-B21
468332-B21
489892-B21
581201-B21
DL580G7 PCI Express I/O Exp. Kit
NOTE: Adds four PCI-E 2.0 x8, one PCI-E 2.0 x4 and one PCI-E 1.1 x4.
DL580G7 PCI-X / PCI Express I/O Exp. Kit
NOTE: Adds two PCI-E 2.0 x16, one PCI-E 2.0 x4 and two PCI-X.
588137-B21
HP 1200W CS HE Power Supply Kit
NOTE: Option Kit contains optional power supply, an IEC power cable and PDU IEC
cables.
NOTE: The HP ProLiant DL580 G7 does an inventory of the system configuration to
determine what level of redundancy the power supply configuration supports based on
some configuration assumptions. The level of redundancy will be reported during the
system power on. For planning purposes you can use the Power Advisor
(www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor) which
is more accurate to determine the power requirements. Also, there is an RBSU
override switch capability that allows the user to override the base setting if the Power
Advisor indicates redundancy with their configuration.
500172-B21
DA - 13669
North America — Version 1 — June 21, 2010
588139-B21
Page 24
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Additional Options
HP Insight Software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server
License
HP Insight Control suite, No Media, Electronic License including 1 year of 24x7
Technical Support and Updates
HP Insight Control, Electronic License for bundling with ProLiant ML/DL server,
including 1 year of 24x7 Technical Support and Updates
HP Insight Control, Tracking License for bundling with ProLiant ML/DL server,
including 1 year of 24x7 Technical Support and Updates
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate. The license entitlement
certificate must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support and Update
Service.
NOTE: Licenses ship without media. The HP Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the Insight Control QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Insight Control for Linux
HP Insight Control for Linux, No Media, 1-server license for bundling with Tower,
Rack, and Scalable servers, including one year of 24x7 Technical Support and
Updates, Electronic
HP Insight Control for Linux, 1-server license, including one year of 24x7 Technical
Support and Updates, Electronic
HP Insight Control for Linux, No Media, 1-Server license, including one year of 24x7
Technical Support and Updates
HP Insight Control for Linux, Media pack (DVD) - No licenses included
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be
ordered separately, or can be downloaded at: http://www.hp.com/go/ic-linux (click
on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing options, please see
the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Integrated Lights-Out Advanced
HP Integrated Lights-Out Advanced, No Media, 1-Server License, including 1 year of
24x7 Technical Support and Updates
HP ProLiant Essentials Integrated Lights-Out Advanced Pack, Electronic, including 1
year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via HP iLO
Advanced. Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax in
DA - 13669
North America — Version 1 — June 21, 2010
452148-B22
T9074BAE
TC278AAE
TC275A
TC203AAE
TC213AAE
TC209A
TC208A
512485-B21
TA850AAE
Page 25
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Additional Options
order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support Service
NOTE: For additional license kits, including electronic delivery options, please see the
QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12362_na/12362_na.html
HP Insight Control server deployment
HP Insight Control server deployment Electronic License including 1 year 24x7
Technical Support and Updates
HP Insight Control server deployment, Single-Server License including 1 year of 24x7
Technical Support and Updates
NOTE: Licenses ship without media. The Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Security - TPM
HP Trusted Platform Module Option Kit
HP Storage Controllers
SAS Controllers
Smart Array P212 Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
Smart Array P411 Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB with BBWC Controller
HP Smart Array P411/1G Flash Backed Write Cache
HP Smart Array P411/512MB Flash Backed Write Cache
Smart Array P812 Controller
HP Smart Array P812/1G Flash Backed Cache Controller
Optional Upgrades
512MB BBWC
NOTE: Supported on HP Smart Array P411 Controller only.
1G Flash Backed Write Cache
512MB Flash Backed Write Cache
HP Smart Array Advanced Pack No Media 1-Server license including 1yr 24x7
Technical Support
NOTE: This part number can be used to purchase a single license or to order multiple
licenses with a single activation key. Customers will receive a license entitlement
certificate via e-mail. The license entitlement certificate must be redeemed online or
via fax in order to obtain the license activation key(s). Include one year of 24x7 HP
Software Technical Support Services.
DA - 13669
North America — Version 1 — June 21, 2010
T9082AAE
452151-B21
488069-B21
462828-B21
462834-B21
462830-B21
462832-B21
572531-B21
578229-B21
487204-B21
462967-B21
534562-B21
534916-B21
516471-B21
Page 26
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Additional Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13202_na/13202_na.html
(Smart Array P411 Controller)
http://h18000.www1.hp.com/products/quickspecs/13558_na/13558_na.html
(Smart Array P812 Controller)
http://h18000.www1.hp.com/products/quickspecs/13200_na/13200_na.html
(Smart Array Advanced Pack)
SAS HBA
HP SC08e 6Gb 2-ports Ext PCIe SAS HBA
NOTE: This is a 2 x4 External Port HBA
NOTE: This is only approved for the HP StorageWorks P2000 G3 SAS Modular Smart
Array.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/13651_na/13651_na.html
(SC08e 6Gb HBA)
SCSI HBA
HP SC11Xe Host Bus Adapter
NOTE: Recommended HBA for SCSI tape drive connect.
NOTE: Please see the following QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12566_na/12566_na.html
(SC11Xe HBA)
HP Power Cords
HP PWR CRD 1.83m 10A C13-UL DOM
HP RDNT 2m,10A, C13-C14 JMPR CORD
HP Tape Backup
NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries
and media see: http://www.hp.com/go/tape. For hardware and software compatibility
of HP StorageWorks tape backup products see: http://www.hp.com/go/connect.
HP StorageWorks DAT 320 USB Tape Drive in 1U USB Rack Kit
HP StorageWorks DAT 320 SAS Internal Tape Drive
NOTE: For installation into 1U SAS rack kit (AE459B) or 3U SAS rack kit (AG576B).
No peripheral bay available for installation into the server. Connection using HP P212
Smart Array Controller SAS (462828-B21) recommended.
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive
NOTE: For installation into 1U SAS rack kit (AE459B) or 3U SAS rack kit (AG576B).
No peripheral bay available for installation into the server. Connection using HP P212
Smart Array Controller SAS (462828-B21) recommended.
HP StorageWorks LTO-4 Ultrium 1760 Internal Tape Drive
NOTE: For installation into 1U SAS rack kit (AE459B) or 3U SAS rack kit (AG576B).
No peripheral bay available for installation into the server. Connection using HP P212
Smart Array Controller SAS (462828-B21) recommended.
HP StorageWorks LTO-4 Ultrium 1840 Internal Tape Drive
NOTE: For installation into 3U SAS rack kit (AG576B). No peripheral bay available
for installation into the server. Connection using HP P212 Smart Array Controller SAS
(462828-B21) recommended.
DA - 13669
North America — Version 1 — June 21, 2010
614988-B21
412911-B21
AF556A
AF573A
AP835A
AJ830A
EH847A
EH919A
EH860A
Page 27
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Additional Options
HP StorageWorks LTO-5 Ultrium 3280 Internal Tape Drive
NOTE: For installation into 3U SAS rack kit (AG576B). No peripheral bay available
for installation into the server. Connection using HP P212 Smart Array Controller SAS
(462828-B21) recommended.
HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader
NOTE: Requires HP 1U Tape Autoloader Rack Kit (AH166A) for rack installation.
Connection using HP P212 Smart Array Controller SAS (462828-B21) recommended.
HP StorageWorks MSL2024 Tape Library with one LTO-4 Ultrium 1760 SAS Drive
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21)
recommended.
HP StorageWorks MSL4048 Tape Library with two LTO-4 Ultrium 1760 SAS Drives
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21)
AK382A recommended.
HP StorageWorks MSL8096 Tape Library with two LTO-4 Ultrium 1760 SAS Drives
NOTE: Connection using HP P212 Smart Array Controller SAS (462828-B21)
recommended.
HP Disk Backup
NOTE: For the complete range of StorageWorks D2D Backup Systems see:
http://www.hp.com/go/d2d. For the complete range of StorageWorks RDX drives and
media see: http://www.hp.com/go/rdx. For hardware and software compatibility of
HP StorageWorks disk backup products see: http://www.hp.com/go/connect.
HP StorageWorks D2D Backup Systems with Backup Data Deduplication
HP StorageWorks D2D4009i Backup System
NOTE: 7.5TB of useable network disk backup capacity. Network connected appliance
with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI
initiator, the QLogic QLA4050 Host Bus Adapter is recommended.
HP StorageWorks D2D4112fc Backup System
NOTE: 9.0TB (expandable to 18.0TB) of useable network disk backup capacity. Fibre
Channel SAN connected appliance. Direct server attach is not supported, requires
connection via SAN fabric.
DA - 13669
North America — Version 1 — June 21, 2010
EH899A
AK377A
AK378A
AK380A
AK382A
EH939A
EH993A
Page 28
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Additional Options
HP StorageWorks
Options
StorageWorks Fibre Channel HBA
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and
Linux. For detailed compatibility information please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
Brocade Fibre Channel HBAs
HP StorageWorks 81B PCI-e FC HBA Single Port
HP StorageWorks 82B PCI-e FC HBA Dual Port
HP StorageWorks 41B 4Gb PCI-e FC HBA
HP StorageWorks 42B 4Gb Dual-Port PCI-e FC HBA
Emulex Fibre Channel HBAs
HP StorageWorks 81E PCI-e FC HBA Single Port
HP StorageWorks 82E PCI-e FC HBA Dual Port
HP StorageWorks FC2142 4Gb PCI-e HBA
HP StorageWorks FC2242 Dual Channel 4Gb PCI-e HBA
QLogic Fibre Channel HBAs
HP StorageWorks 81Q PCI-e FC HBA Single Port
HP StorageWorks 82Q PCI-e FC HBA Dual Port
HP StorageWorks FC1142 4Gb PCI-e HBA
HP StorageWorks FC1242 Dual Channel 4Gb PCI-e HBA
StorageWorks Converged Network Adapter
HP CN1000E 2P Converged Network Adapter
HP Disk Storage Systems MSA SAN Storage Arrays
HP StorageWorks 60 Modular Smart Array
NOTE: Supports 12 SFF drives, and SAS 3 Gb/s and SATA 1.5 Gb/s.
NOTE: Please see the QuickSpecs for additional options and configuration
information at:
http://h18000.www1.hp.com/products/quickspecs/12627_na/12627_na.html
HP StorageWorks 70 Modular Smart Array
NOTE: Supports 25 SFF drives, and SAS 3 Gb/s and SATA 1.5 Gb/s.
NOTE: Please see the QuickSpecs for additional options and configuration
information at:
http://h18000.www1.hp.com/products/quickspecs/12652_na/12652_na.html
Disk Enclosures
HP StorageWorks D2600 Disk Enclosure
HP StorageWorks D2700 Disk Enclosure
NOTE: Please see the QuickSpecs for additional options and configuration
information at:
http://h18000.www1.hp.com/products/quickspecs/13404_na/13404_na.html
DA - 13669
North America — Version 1 — June 21, 2010
AP769A
AP770A
AP767A
AP768A
AJ762A
AJ763A
A8002A
A8003A
AK344A
AJ764A
AE311A
AE312A
AW520A
418408-B21
418800-B21
AJ940A
AJ941A
Page 29
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Additional Options
HP Uninterruptible Power HP Rack-mountable UPS
Systems
HP Rack-Mountable R5500 UPS
HP R5500 VA UPS
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/11871_na/11871_na.html
HP R/T3000 Uninterruptible Power System (UPS)
HP R/T3000 UPS, High voltage
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13417_na/13417_na.html
NOTE: For additional information on HP Uninterruptible Power Systems please go to:
www.hp.com/servers/rackups.
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com.
HP Power Distribution
Units
HP Monitored Power Distribution Unit: Half Rack Version
HP 4.9 kVA S124 Monitored PDU- single input, 1Ø, 24A
HP Monitored Power Distribution Unit: Full Rack Version
HP 8.6 kVA S1324 Monitored PDU- single input, 3Ø, 24A
HP 8.3 S1140 Monitored PDU- single input, 1Ø, 40A
NOTE: Please see the following QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/12118_na/12118_na.html
Modular Power Distribution Units 1U/0U (Up to 32 outlets)
NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 and
9000 series racks).
HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC)
8.3kVA Model - mPDU, 40A, High (power cord attached)
HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC)
NOTE: This PDU has a detachable input power cord and allows for adaptability to
power requirements.
NOTE: Please see the following QuickSpecs for additional options including shorter
jumper cables and power cords:
http://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.html
NOTE: For additional information on HP Power Distribution Units including
accessories please go to: www.hp.com/go/pdu.
DA - 13669
North America — Version 1 — June 21, 2010
AF426A
AF453A
AF914A
AF504A
AF506A
252663-D72
252663-D73
252663-B24
Page 30
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Additional Options
HP Rack Series
HP Rack Options
HP Rack 10000 G2 Series (Carbon/Graphite Metallic)
10642 G2 (42U) Rack Cabinet - Pallet
10642 G2 (42U) Rack Cabinet - Shock Pallet
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.html
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
HP Server Console Switches
HP Server console switch 0x2x8
HP Server console switch 0x2x16
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11834_na/11834_na.html
HP Server Console Switch G2 with Virtual Media & CAC
0x2x16 KVM Server Console G2 Switch with Virtual Media and CAC
0x2x32 KVM Server Console G2 Switch with Virtual Media and CAC
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13475_na/13475_na.html
HP IP Console Switch G2 with Virtual Media & CAC
1x1Ex8 KVM IP Console Switch G2 with Virtual Media and CAC
2x1Ex16 KVM IP Console Switch G2 with Virtual Media and CAC
4x1Ex32 KVM IP Console Switch G2 with Virtual Media and CAC
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_na/13474_na.html
HP USB and SD Options HP USB 04 Standard Keyboard
HP 4GB SD Flash Media Kit
NOTE: Blank SD media device is supported for use with VMware and Citrix. SD
media must be installed in the internal slot of the ProLiant server. Learn more at:
http://www.hp.com/go/proliantvirtualization.
HP 2GB USB Flash Media Drive Key
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the
VMware virtualization environment and other HP value-add software like SmartStart.
HP recommends this industry standard USB flash device for use with VMware ESXi.
USB device must be installed in the internal slot of the ProLiant server for use with
VMware ESXi. Refer to HP VMware Getting Started Guide for installation instructions.
DA - 13669
North America — Version 1 — June 21, 2010
AF001A
AF002A
AF616A
AF617A
AF618A
AF619A
AF620A
AF621A
AF622A
DT528A#ABA
580387-B21
608447-B21
Page 31
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Additional Options
HP Care Pack Services
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service 7-Day x 24-Hour Coverage, 3 Years
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Installation & Start-up Services
Hardware Installation, Electronic
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the
Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am5pm, M-F, excl. HP holidays, Electronic
Installation and Startup for Essentials Rapid Deployment Pack, Electronic
Support Plus
Onsite HW support, 8am-9pm, M-F, 4hr response and Microsoft O/S SW Tech
support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP
holidays, Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite,
onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
Onsite HW support 24x7, 4hr response and SuSE O/S SW Tech support offsite, onsite
at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack
DA - 13669
North America — Version 1 — June 21, 2010
U4607E
U4608E
U4609E
U4617E
U4618E
U5683E
U4619E
U4620E
U6316E
Page 32
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
HP ProLiant DL580 G7
Memory Subsystem Architecture
Xeon EX memory architecture is designed to take advantage of multiple stages of memory interleaving to reduce latency and increase
bandwidth.
Each Xeon EX processor contains two Memory Controllers as shown in the Processor/Memory interconnect figure below. Each
Memory controller has two Scalable Memory Interface (SMI) buses operating in lockstep where each SMI bus connects to a memory
buffer. The purpose of the buffer is to convert SMI to DDR3. Each buffer has two DDR3 channels and can support up to four DIMMs
for a total of eight DIMMs per cartridge.
Memory speed is not affected by number of DIMMs or ranks. All DIMMs will run at the highest possible speed for a given
processor.
DDR3 memory speed is a function of the processors QPI bus speed such that
Processors with a QPI speed of 6.4GT will run memory at 1066MHz
Processors with a QPI speed of 5.6GT will run memory at 978MHz
Processors with a QPI speed of 4.8GT will run memory at 800 MHz
DIMM Installation guidelines
Each memory cartridge can support up to 8 DIMMs, for a system total of 64 DIMMs. When installing DIMM modules in the Memory
Cartridge observe the following minimum guidelines:
UDIMMs are not supported
Minimum allowable configuration is two DIMMs per cartridge.
DIMMs must be installed in pairs with identical characteristics. For configuration simplicity HP recommends using identical
part numbered DIMMs throughout when possible.
DIMM pairs MUST be populated in sequence by letter designation. Install DIMM pair 1A, 8A first followed by DIMM pair 3B,
6B then DIMM pair 2C, 7C and DIMM pair 4D, 5D last.
Maximum performance is achieved by balancing DIMM pairs by letter groupings across all memory cartridges. Such that the
1A, 8A pair is install in all memory cartridges first (see diagram below) followed by the B pair, C pair and D pair.
AMP modes Online Sparing and Memory Mirroring have further requirements beyond these listed here. Please refer to the
user guide for additional memory configuration requirements.
Figure 1 Processor/Memory interconnect
Illustration of how the processor, cartridges and DIMMs are electrically connected.
DA - 13669
North America — Version 1 — June 21, 2010
Page 33
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Memory
Memory Cartridge population guidelines
This server contains 8 memory cartridge slots in the processor memory drawer. Observe the following guidelines:
Populate memory cartridge slots for a processor only if the processor is installed where:
Processor 1 connects to cartridge slots 1 and 2.
Processor 2 connects to cartridge slots 3 and 4.
Processor 3 connects to cartridge slots 5 and 6.
Processor 4 connects to cartridge slots 7 and 8.
Minimum recommended cartridge population is one cartridge per processor. For best performance two cartridges per
processor are recommended.
Processors installed without corresponding memory cartridges will incur high memory access latencies and is not
recommended.
To maximize performance in multi-processor configurations distribute the total memory capacity evenly between all
processors.
Hemisphere mode
The Xeon EX architecture incorporates hemisphere mode, a high performance interleaving technology. Hemisphere mode allows
interleaving between the two processor memory controllers internal to each processor.
Hemisphere mode is enabled when all processors in a system have the memory behind both memory controllers populated
identically.
To enable each processor to enter hemisphere mode it must have both cartridges installed, populated with equal memory
capacities and follow the DIMM installation guidelines.
Figure 2 Hemisphere Population Diagram
Examples of Hemisphere vs Non-Hemisphere populations.
Memory Performance Optimization
DA - 13669
North America — Version 1 — June 21, 2010
Page 34
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Memory
The DL580 G7 supports 64 DIMMs across four multi-core processors. While there are many DIMM population configurations that
can support any desired total memory size, optimal performance can only be achieved when DIMMs are populated to take
advantage of the Xeon EX architecture. Reference the Figure: Hemisphere Population Diagram to achieve the best performance for a
given memory/processor configuration.
The largest contributor to maximum memory bandwidth performance is to utilize both memory controllers inside the processor.
This is achieved by populating both memory cartridges for each installed processor.
The second largest contributor to performance is to populate each DDR3 channel in each memory cartridge. To achieve this,
the minimum DIMM count per cartridge is four. Maximum bandwidth is reached by fully populating all memory cartridges with
the maximum number of eight DIMMs per cartridge.
Best performance is obtained when all installed processors are enabled for Hemisphere mode.
Hemisphere mode is optimum when four or eight DIMMs are installed per cartridge. Hemisphere mode can be reached with
two or six DIMMs per cartridge (2 cartridges per processor) but it is not optimal configuration for Hemisphere mode.
Plan your memory configurations using Identical DIMMs to reach your memory size target taking into account that 32 and 64
DIMM count configurations result in the highest performance. For a 4 processor example:
If initial memory target is 64GB then populate a 4 processor system with eight cartridges of 4 - 2GB DIMMs each for a
total of 32 DIMMs. Your maximum expansion target is 128GB with 64 2GB DIMMs.
For 4GB DIMMs your initial memory target is 128GB using 32 DIMMs. Your maximum expansion target is 256GB with
64 DIMMs.
For 8GB DIMMs your initial memory target is 256GB using 32 DIMMs. Your maximum expansion target is 512GB with
64 DIMMs.
Maximum system memory capability is reached with an initial memory target of 512GB with 32 - 16GBDIMMs and 1TB
with 64 16GB DIMMs.
The more ranks per DIMM the higher the performance such that Quad rank DIMMs perform better than dual rank DIMMs.
NOTE: Memory configurations listed do not apply to "Factory Integrated Models". Only registered (RDIMM) speeds of 1066 or 1333
running at 1066 are supported and must be installed in pairs. UDIMMs are not supported.
HP Memory
Registered DIMMs (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Memory Board Upgrade Option
HP DL580G7 Memory Board
DA - 13669
North America — Version 1 — June 21, 2010
500656-B21
500658-B21
500662-B21
500666-B21
588141-B21
Page 35
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Storage
1-8
SFF SAS Internal Drive cage
Drive Support
Optical Drives
Slimline DVD-ROM drive
HP Slim SATA DVD RW
Optical Drive
Quantity
Supported
Position
Supported
Up to 1
Up to 1
1
1
Controller
Integrated SATA
Integrated SATA
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should
operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Quantity
Position
Supported
Supported
Controller
300GB 6G SAS 10K DP
Up to 8
1-8
HP Smart Array P212/Zero Memory Controller
146GB 6G SAS 15K DP
HP Smart Array P212/256 MB Controller
146GB 6G SAS 10K DP
HP Smart Array P411/256MB Controller
72GB 6G SAS 15K DP
HP Smart Array P411/512MB with BBWC Controller
HP Smart Array P411/512MB Flash Backed Write Cache
HP Smart Array P411/1G Flash Backed Write Cache
HP Smart Array P812/1G Flash Backed Cache Controller
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
500GB 6G SAS 7.2K DP
Up to 8
1-8
DA - 13669
Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P411/256MB Controller
HP Smart Array P411/512MB with BBWC Controller
HP Smart Array P411/512MB Flash Backed Write Cache
HP Smart Array P411/1G Flash Backed Write Cache
HP Smart Array P812/1G Flash Backed Cache Controller
North America — Version 1 — June 21, 2010
Page 36
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Storage
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
500GB 3G SATA 7.2K
Up to 16
3,4
160GB 3G SATA 7.2K
SATA Hot Plug SFF (2.5-inch) Entry (ETY) Drives
Quantity
Position
Supported
Supported
250GB 3G SATA 5.4K
Up to 8
1-8
120GB 1.5G SATA 5.4K
SATA Hot Plug Midline (MDL) Solid State Drives
Quantity
Position
Supported
Supported
60GB 3.0G SATA SSD
Up to 8
1-8
120GB 3.0G SATA SSD
DA - 13669
Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P411/256MB Controller
HP Smart Array P411/512MB with BBWC Controller
HP Smart Array P411/512MB Flash Backed Write Cache
HP Smart Array P411/1G Flash Backed Write Cache
HP Smart Array P812/1G Flash Backed Cache Controller
Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P411/256MB Controller
HP Smart Array P411/512MB with BBWC Controller
HP Smart Array P411/512MB Flash Backed Write Cache
HP Smart Array P411/1G Flash Backed Write Cache
HP Smart Array P812/1G Flash Backed Cache Controller
Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P411/256MB Controller
HP Smart Array P411/512MB with BBWC Controller
HP Smart Array P411/512MB Flash Backed Write Cache
HP Smart Array P411/1G Flash Backed Write Cache
HP Smart Array P812/1G Flash Backed Cache Controller
North America — Version 1 — June 21, 2010
Page 37
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Storage
External Storage
60 Modular Smart Array
Quantity
Supported
Up to 8
Position
Supported
External
70 Modular Smart Array
Up to 4
External
D2600 Disk Enclosure
Up to 8
External
D2700 Disk Enclosure
Up to 4
External
Host Controller or Adapter
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
HP Smart Array P411/256MB BBWC Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
HP Smart Array P812/1G Flash Backed Cache Controller
Maximum Storage Capacity - (External SAS Enclosure Attached)
Internal
4.TB (8 x 500GB SFF SAS/SATA Drives)
External
960TB (80 MSA60 enclosures x 12 drive bays each x 1TB SATA Drives)
Tape and Disk-Based Backup
NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media, including the internal fitting models,
see: http://www.hp.com/go/tape. For the complete range of StorageWorks D2D Backup Systems see: http://www.hp.com/go/d2d.
For the complete range of StorageWorks RDX drives and media see: http://www.hp.com/go/rdx. For hardware and software
compatibility of HP StorageWorks disk and tape backup products see: http://www.hp.com/go/connect.
Position
Recommended Controller
HP StorageWorks SCSI
Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit
External
HP SC11Xe Host Bus Adapter
HP StorageWorks USB
Tape Drives
DAT 40
DAT 72
DAT 160
External
Controller Part
Number
412911-B21
Please check the full compatibility information at:
http://www.hp.com/go/connect
USB 2.0 Port
DA - 13669
North America — Version 1 — June 21, 2010
N/A
Page 38
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Storage
DAT 320
1U USB Rack-Mount Kit
HP StorageWorks SAS
Tape Drives
DAT 160
DAT 320
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-4 Ultrium 1760
LTO-4 Ultrium 1840
LTO-5 Ultrium 3000
LTO-5 Ultrium 3280
1U Rack-Mount Kit
3U Rack-Mount Kit
External
HP Smart Array P212/Zero Memory Controller
Please check the full compatibility information at:
http://www.hp.com/go/connect
462828-B21
HP StorageWorks SCSI
Tape Autoloaders
DAT 72x10 Autoloader
1/8 G2 Autoloader
External
HP SC11Xe Host Bus Adapter
412911-B21
HP StorageWorks SCSI
Tape Libraries, External
MSL2024
MSL4048
MSL8096
MSL6000
External
HP StorageWorks SAS
Tape Autoloaders and
Libraries
1/8 G2 Autoloader
MSL2024
MSL4048
MSL8096
External
HP Smart Array P212/Zero Memory Controller
Please check the full compatibility information at:
http://www.hp.com/go/connect
HP StorageWorks Fibre
Channel Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000
External
Please consult the EBS connectivity matrix at:
http://www.hp.com/go/ebs for connectivity information and the
supported Fibre Channel HBAs shown in this QuickSpec.
HP StorageWorks USB
RDX Removable Disk
Backup System
RDX160
RDX320
RDX500
External
USB 2.0 port
Please check the full compatibility information at:
http://www.hp.com/go/connect
HP U320e SCSI Dual Channel Controller
AH627A
Please check the full compatibility information at:
http://www.hp.com/go/connect
DA - 13669
North America — Version 1 — June 21, 2010
462828-B21
N/A
Page 39
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Storage
RDX750
HP StorageWorks D2D
Backup Systems, iSCSI
D2D2500i
D2D4000i
External
Embedded Network Controller. If the server requires a hardware
iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is
recommended.
HP StorageWorks D2D
Backup Systems, Fibre
Channel
D2D4000fc
External
Direct server attach is not supported, requires connection via SAN
fabric. See: http://www.hp.com/go/connect
DA - 13669
North America — Version 1 — June 21, 2010
Page 40
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Power Specifications
HP 1200W Power Supply
Part Number - AC
500172-B21
Operational Input Voltage Range 100 to 240
(Vrms)
Frequency Range (Nominal) (Hz) 50/60
100
Nominal Input Voltage (Vrms)
Maximum Rated Output Wattage
800
Nominal Input Current (A rms)
9.7
Max Rated Input Wattage Rating
930
(Watts)
Max. Rated VA (Volt-Amp)
970
Efficiency (%) at Max. Rated
86
Output Wattage
Power Factor
0.97
Leakage Current (mA)
0.42
Max. Inrush Current (A peak)
30
Max. Inrush Current duration (mS)
20
Maximum British Thermal Unit
3174
Rating (BTU-Hr)
120
900
9.0
1034
200
1200
7.0
1348
208
1200
6.8
1348
220
1200
6.4
1348
230
1200
9.1
1348
240
1200
5.9
1348
1079
87
1406
89
1406
89
1406
89
1406
89
1406
89
0.97
0.50
30
20
3530
0.97
0.83
30
20
4600
0.97
0.87
30
20
4600
0.97
0.92
30
20
4600
0.97
0.96
30
20
4600
0.97
1.00
30
20
4600
NOTE: To review typical system power ratings use the HP Power Advisor which is available online located at url:
www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor
DA - 13669
North America — Version 1 — June 21, 2010
Page 41
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Technical Specifications
System Unit
Dimensions (H x W x D)
(with bezel)
Weight
(approximate)
Input Requirements
(per power supply)
BTU Rating
Power Specifications
6.94" x 19.0" x 27.55" (17.6cm x 48.3cm x 70.0cm)
Maximum
100.0 lb (45.4 kg)
(all hard drives, power
supplies, DIMMs and
processors installed)
Minimum
66.0 lb (30.0 kg)
(one hard drive, two power
supplies, four DIMMs, and
two processors installed)
Rated Line Voltage
100 - 127 VAC,
200 - 240 VAC
Rated Input Current
12 A (at 100 VAC),
8 A (at 200 VAC)
Rated Input Frequency
50 to 60 Hz
Rated Input Power
1161 W (at 100 VAC),
1598 W (at 240 VAC)
Maximum
3960 BTU/hr (at 100 VAC),
5450 BTU/hr (at 200 VAC)
NOTE: To review typical system power ratings use the HP Power Advisor
which is available online located at url: www.hp.com/go/proliant-energyefficient or www.hp.com/go/hppoweradvisor
- Click on the system of interest. Example: DL580 G7
- Follow the instructions of the next screens.
Power Supply Output (per Rated Steady-State Power 910 W (low line),
power supply)
1300 W (high line)
Maximum Peak Power
910 W (low line),
1300 W (high line)
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Relative Humidity
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
(non-condensing)
maximum wet bulb temperature, noncondensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, noncondensing.
DA - 13669
North America — Version 1 — June 21, 2010
Page 42
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Technical Specifications
Altitude
Operating
Acoustic Noise
Emissions Classification
(EMC)
HP Slim SATA DVD RW
Optical Drive
Shipping Dimensions
Drive Dimensions
(HxWxD, maximum)
Disk
DA - 13669
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
6.4 B (with PCI-E)
L WAd
NA dBA
L pAm
Operating
6.8 B (with PCI-E)
L WAd
NA dBA
L pAm
Class A
FCC Rating
CISPR 22; EN55022; EN55024; FCC CFR 47,
Normative Standards
Pt 15; ICES-003; CNS13438; GB9254;
K22;K24; EN 61000-3-2; EN 61000-3-3; EN
60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and
statements.
3.97 x 7.81 x 10.75 in (10.08 x 19.84 x 27.31 cm)
0.5 x 5.2 x 5.45 in (12.7 x 132 x 138 mm)
Applicable Disk
DVD-ROM
DVD-R
DVD-R DL
DVD-RW
DVD+R
DVD+R DL
DVD+RW
CD-Extra
DVD RAM
CD-ROM XA
CD-ROM Mode-1 data disc
CD-ROM Mode-2 data disc
CD Audio disc
CD-Extra
North America — Version 1 — June 21, 2010
Page 43
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Technical Specifications
Capacity
CD-RW
CD-R
Photo CD
CD-I
CD-DA
DVD-ROM
DVD-SL
DVD-DL
Double
Sided
DVD+/-R
DVD +/-RW
4.7 GB/side
8.5 GB/side
9.40 GB
4.7 GB/side
4.7 GB/side
DVD RAM
CD-ROM
Block Size
Diameter
Loading Mechanism
Interface
Access Times (typical)
Audio Output Level
(typical)
Data Transfer Rate
(sustained)
Cache Buffer
Spin-up Time (typical)
MTBF
Ambient
Temperature
DA - 13669
Tray type
SATA 1.5
Random
Full-Stroke
Line-out
DVD-ROM Single Layer
CD-ROM
2 MB
less than 15 seconds
60,000 Power On Hours
(POH)
Operating
Storage/Transportation
5.2 GB/side
Mode-1 650 (700 MB)
Mode-2 742 MB (640 MB)
DVD
2,048 bytes
CD
2,352 (Mode-0)
2352, 2340,
2336, 2048 bytes
(Mode-1)
2352, 2340,
2336, 2048 bytes
(Mode-2)
120 mm, 80 mm (with adapter at vertical
mounting mode)
Auto Loading
DVD-ROM < 120 ms, CD-ROM < 110 ms
DVD-ROM < 250 ms, CD-ROM < 210 ms
CD 0.7 Vrms at 47 Kohms Load
10.8 MB/sec Max.
3.6 MB/sec Max.
41° to 122° F (5° to 50° C)
-40° to 120° F (-30° to 60° C)
North America — Version 1 — June 21, 2010
Page 44
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Technical Specifications
Integrated Lights-Out 3
(iLO 3)
integrated on system
board
Architecture
Processor
Upgradeability
Interfaces
Memory
Operating System
Support
PCI Express based health and remote management ASIC
PCI Express RISC processor core running at 250MHz
Option firmware upgradeable via Flash ROM.
One Ethernet Sideband connection (10/100/1000 Mb/s)
One Ethernet network connection (10/100Mb/s)
128-MB RAM with ECC
Microsoft Windows 2008 R2
Microsoft Windows 2008 (32 bit and 64 bit)
Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)
Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)
Microsoft Windows Server 2003 and Windows Server 2003 R2, and
Windows Server 2003 for Extended Systems Standard Edition, Enterprise
Edition
Red Hat Enterprise Linux 5.4 (32 bit and 64 bit)
SUSE LINUX Enterprise Server 11 (32bit and 64bit)
SUSE LINUX Enterprise Server 10 (32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Client System Support
Microsoft Windows 7
Microsoft Windows XP Professional Edition
Microsoft Windows Vista Business and Ultimate Editions
Red Hat Enterprise Desktop 5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
Client Browser Support
Microsoft Internet Explorer 8
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows and Linux systems)
Firefox 3.0 (on supported Windows and Linux systems)
Command Line Support Secure Shell and serial port access
Secure Socket Layer
Secure Shell version 2
Security
Advanced Encryption Standard (AES) and Triple Data Encryption Standard
(3DES) on browser, CLP and XML scripting interface
AES encryption of video
RC4 encryption of video
Directory Support Services Active Directory v1.0 (Windows 2003)
Driver Support
HP ProLiant iLO3 Management Controller Driver Package
SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems Management
Management protocols
supported
Architecture for Server Hardware Command Line Protocol (SMASH CLP), HP
RIBCL XML
DA - 13669
North America — Version 1 — June 21, 2010
Page 45
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Technical Specifications
Smart Array P410i
Controller
Disk Drive and Enclosure 6Gb/s SAS (Serial Attached SCSI)
Interface
2 internal (Mini-SAS) x8 wide port connectors
SAS Connectors
DDR2-800MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
Cache Memory Speed
maximum bandwidth
x8 5G PCIe 2.0 provides 4GB/s maximum bandwidth
Server Interface
x8 6Gb/s SAS provides 4.8GB/s maximum bandwidth
SAS Speed
40-bit 256MB ECC protected cache (72-bit 512MB BBWC or 72-bit 512MB
Cache Memory
and 1G FBWC module upgrades available); transportable with batterybacked or flash upgrade
Logical Drives Supported Up to 64 logical drives
Maximum Logical Drive Greater than 2TB
Capacity
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
RAID 6, 6+0 (Advanced Data Guarding)
RAID Support
NOTE: RAID 6, 6+0 can be enabled with either
Minimum of 256 MB cache, Battery kit and Smart Array Advanced Pack
License key option upgrades
Minimum of 512 MB BBWC/FBWC and Smart Array Advanced Pack License
key option upgrades
RAID 5, 5+0 (Distributed Data Guarding)
NOTE: The 256 MB cache is required to enable RAID 5, 5+0 support of the
Smart Array P410i
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping
HP NC375i Integrated
Quad Port Multifunction
Gigabit Server Adapter
Network Interface
Compatibility
Data Transfer Method
Controller
Network Transfer Rate
Connector
DA - 13669
10Base-T/100Base-TX/1000Base-TX
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ad 1000Base-TX
IEEE 802.1p 100Base-TX
IEEE 802.1q 100Base-TX
PCI-Express x4
Qlogic/NetXen NX3031
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Half and
2000 Mb/s
Full-Duplex)
RJ-45
North America — Version 1 — June 21, 2010
Page 46
QuickSpecs
HP ProLiant DL580 Generation 7 (G7)
Technical Specifications
Environment-friendly
Products and Approach
Cable Support
10Base-T
100Base-TX
1000Base-TX
Categories 3, 4, or 5 UTP; up to 328 ft (100 m)
Category 5 or higher UTP; up to 328 ft (100 m)
Category 5 or higher UTP; up to 328 ft (100 m)
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Unix is a registered trademark of The Open
Group.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13669
North America — Version 1 — June 21, 2010
Page 47