Owner’s Manual
Manual del Propietario
Manuel du Propriétaire
32MD304V
Necesita ayuda
inmediata?
www.magnavox.com/support
www.magnavox.com/support
www.magnavox.com/support
1 866 341 3738
1 866 341 3738
1 866 341 3738
2 .English
Contents
1 Notice ......................................................................................................................... 5
2 Important ................................................................................................................ 7
Positioning the TV
Dew Condensation Warning
Regulatory Notices
Environmental Care
Preparing to Move / Ship the Unit
7
7
7
7
7
3 Getting Started ............................................................................................... 8
Features
Supplied Accessories
Symbols used in this Owner’s Manual
Attaching the Base
Mounting the Unit on your furniture
Installing the Remote Control Batteries
Remote Control
Control Panel
Terminals
Connecting the Antenna, Cable or Satellite
Connecting a Set-top Box, Blu-ray Disc / DVD Recorder
via Composite Connectors and Analog Audio
Plugging in the AC Power Cord
Selecting your Connection quality
HDMI - Highest quality
Composite - Basic quality
Connecting your Devices
HDMI Digital Connection
HDMI-DVI Connection
Composite Analog Video Connection
Digital Audio Output Connection
PC Connection
Initial Setup
8
9
9
9
10
10
11
12
12
13
13
13
14
14
14
14
14
14
15
15
15
16
4 Use your TV .................................................................................................... 17
Switching on your TV and putting it in Standby mode
Adjusting Volume
Switching Channels
Watching Channels from an External Device
Changing Picture and Sound Settings
Sleep Timer
Switching Audio Mode
Changing Picture Format
TV Screen information
17
17
17
18
18
18
18
19
19
5 Making more use with your TV ............................................ 20
Displaying the Main Menu
Picture
Sound
Setup
Autoprogram
Channel list
Add channels
20
21
22
23
23
23
24
Antenna Confirmation
Features
Caption settings
Child and Ratings Lock
PC settings
fun-Link (HDMI CEC)
Setting your Location to Home
E-sticker
Language
24
24
24
26
28
29
29
29
30
6 Upgrade your TV Software ......................................................... 31
Checking your Current Software version
Upgrading the Software
31
31
7 DVD ............................................................................................................................ 32
DVD SETTING
DVD Language Setting
DVD Audio Setting
Parental Setting
Others
Reset to the Default Setting
Language Code List
32
32
32
33
33
33
34
8 OPERATING DVD ................................................................................ 35
Playable Media
Unplayable Media
Playback
Disc Menu
Resume Playback
Paused and Step-by-Step Playback
Fast Forward / Fast Reverse
Slow Forward / Slow Reverse
Zoom
Search Functions
Repeat Playback
Repeat A-B Playback
Random Playback
Programmed Playback
On-screen Display
Special Settings
9 Useful tips ...........................................................................................................
FAQ
Troubleshooting
35
35
36
36
36
36
36
36
37
37
37
38
38
38
39
39
41
41
42
10 Information ........................................................................................................ 44
Glossary
Maintenance
44
44
11 Specifications ..................................................................................................
45
12 Warranty .............................................................................................................
46
3 .English
Register Online at www.magnavox.com/support today
to get the very most from your purchase.
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out.
Register Online at www.magnavox.com/support to ensure:
*Product Safety Notification
By Registering your Product, you'll receive notification directly from the manufacturer - in the rare case of a
Product Recall or Safety Defect.
Know these
*Additional Benefits
safety symbols
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear or bottom of the cabinet.
Registering your Product guarantees that you'll receive
all of the Privileges to which you're Entitled, including
special money-saving offers.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the apparatus’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the apparatus.
WARNING:
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall
not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the
apparatus.
CAUTION:
ATTENTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.
Visit our World Wide Web Site at www.magnavox.com/support
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY
CARES
• Manufacturers, retailers and the rest of the consumer
electronics industry are committed to making home
entertainment safe and enjoyable.
• As you enjoy your television, please note that all
televisions – new and old- must be supported on proper
stands or installed according to the manufacturer’s
recommendations. Televisions that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers,
chests, carts, etc., may fall over, resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations
for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use
of your television.
• NEVER allow children to climb on or play on the
television or the furniture on which the television is
placed.
• NEVER place the television on furniture that can easily
be used as steps, such as a chest of drawers.
• ALWAYS install the television where it cannot be
pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the
television so that they cannot be tripped over, pulled or
grabbed.
CE.org/safety
WALL OR CEILING MOUNT YOUR
TELEVISION
• ALWAYS contact your retailer about professional
installation if you have any doubts about your ability to
safely mount your television.
• ALWAYS use a mount that has been recommended by
the television manufacturer and has a safety certification
by an independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the
television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you
are mounting the television is appropriate. Some mounts
are not designed to be mounted to walls and ceilings
with steel studs or cinder block construction. If you are
unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is
required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW
PLACE IN YOUR HOME
• Many new television buyers move their older CRT
televisions into a secondary room after the purchase of a
flat-panel television. Special care should be made in the
placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture
that is sturdy and appropriate for its size and weight.
• NEVER place your older CRT television on a dresser
where children may be tempted to use the drawers to
climb.
• ALWAYS make sure your older CRT television does
not hang over the edge of your furniture.
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11.Only use attachments / accessories specified by the
manufacturer.
12.Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or
sold with the apparatus. When a cart
is used, use caution when moving the
cart / apparatus combination to avoid
injury from tip-over.
Wall Mount Bracket Kit
Brand
32MD304V
•
•
•
•
SANUS
Model #
SAN18B
Screw dimension
M4 x 0.472” (12mm)
The recommended Wall Mount Bracket Kit (sold
separately) allows the mounting of the TV on the wall.
For detailed information on installing the wall mount,
refer to the Wall Mount Instruction Book.
Funai is not responsible for any damage to the product
or injury to yourself or others if you elect to install the
TV Wall Mount Bracket or mount the TV onto the
Bracket on your own.
The Wall Mount Bracket must be installed by experts.
Funai is not liable for these types of accidents or injury
noted below.
4 .English
13.Unplug this apparatus during lightning storms or when
unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Note to the CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
Example of Antenna Grounding as per NEC - National
Electric Code
GROUND CLAMP
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE
SYSTEM (NEC ART 250, PART H)
• Install the Wall Mount Bracket on a sturdy vertical wall.
• If installed onto a ceiling or slanted wall, the TV and Wall
Mount Bracket may fall which could result in a severe injury.
• Do not use screws that are longer or shorter than their
specified length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.
• Do not fasten the screws by excessive force. This may
damage the product or cause the product to fall, leading to
an injury.
• For safety reasons use 2 people to mount the TV onto a
Wall Mounting Bracket.
• Do not mount the TV onto the Wall Mounting Bracket
while your TV is plugged in or Turned On. It may result in an
electrical shock injury.
When installing the unit on the wall, allow this much space.
Top:
11.8 inches (30cm)
Left and right side:
5.9 inches (15cm)
Bottom:
3.9 inches (10cm)
1 Notice
MAGNAVOX is a registered trademark of Philips North America
Corporation and is used by Funai Electric Co., Ltd. and Funai
Corporation, Inc. under license from Philips North America.
Funai reserves the right to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this Owner’s Manual is believed adequate for the
intended use of the system. If the product or its individual modules or
procedures are used for purposes other than those specified herein,
confirmation of their validity and suitability must be obtained. Funai
warrants that the material itself does not infringe any United States
patents. No further warranty is expressed or implied.
Funai cannot be held responsible neither for any errors in the content
of this document nor for any problems as a result of the content in
this document. Errors reported to Funai will be adapted and published
on the Funai support website as soon as possible.
5 .English
Declaration of Conformity
Trade Name
Responsible Party
Model
Address
Telephone Number
:
:
:
:
MAGNAVOX
FUNAI CORPORATION, Inc.
32MD304V
19900 Van Ness Avenue, Torrance, CA
90501 U.S.A.
: 1 866 341 3738
Modifications
This apparatus may generate or use radio frequency energy. Changes or
modifications to this apparatus may cause harmful interference unless
the modifications are expressly approved in the Owner’s Manual.
The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
Cables
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and Regulations.
Pixel characteristics
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural property of the display (within common industry standards)
and is not a malfunction.
Canadian notice
CAN ICES-3 (B)/NMB-3 (B)
Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.
LASER SAFETY
Warranty
No components are user serviceable. Do not open or remove covers
to the inside of the product. Repairs may only be done by Service
Centers and official repair shops. Failure to do so shall void any
warranty, stated or implied.
Any operation expressly prohibited in this Owner’s Manual, any
adjustments or assembly procedures not recommended or authorized
in this Owner’s Manual shall void the warranty.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits
for a Class B Digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television
technician for help.
This apparatus is classified as a CLASS 1 LASER
PRODUCT. This apparatus employs a laser.
Only a qualified service person should remove
the cover or attempt to service this apparatus,
due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending
of discs are prohibited. This item incorporates copy protection
technology that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Copyright
All other registered and unregistered trademarks are the property of
their respective owners.
6 .English
The terms HDMI and HDMI
High-Definition Multimedia Interface,
and the HDMI Logo are trademarks
or registered trademarks of HDMI
Licensing LLC in the United States
and other countries.
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
For DTS patents, see
http://patents.dts.com.
Manufactured under license from DTS
Licensing Limited. DTS, the Symbol, &
DTS and the Symbol together are
registered trademarks, and DTS
TruSurround is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
is a trademark of DVD Format / Logo Licensing Corporation.
ENERGY STAR® is a joint program of
the U.S. Environmental Protection
Agency and the U.S. Department of
Energy helping us all save money and
protect the environment through
energy efficient products and practices.
Consumer Notice:
This TV has been set to maximize energy efficiency while delivering
the best possible picture using the factory installed home mode
settings.
Changing or enabling other features in this TV (e.g. brightened
backlighting) will possibly increase energy consumption beyond the
original ENERGY STAR® qualified limits.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television viewing
for children younger than two years of age.
© 2014 Funai Electric Co., Ltd. All rights reserved.
No part of this Owner’s Manual may be reproduced, transmitted,
disseminated or transcribed, in any form or for any purpose without
the express prior written consent of Funai. Furthermore, any
unauthorized commercial distribution of this Owner’s Manual or any
revision hereto is strictly prohibited.
2 Important
Positioning the TV
•
Large screen TVs are heavy. 2 people are required to carry and
handle a large screen TV.
Make sure to hold the upper and bottom
frames of the Unit firmly as illustrated.
Install the Unit in a horizontal and stable
position.
Do not install the Unit in direct sunlight
or in a place subject to dust or strong
vibration.
Depending on the environment, the
temperature of this Unit may increase slightly. This is not a
malfunction.
Avoid a place with drastic temperature changes.
Do not place anything directly on top or bottom of the Unit.
Depending on your external devices, noise or disturbance of
the picture and / or sound may be generated if the Unit is
placed too close to them. In this case, please ensure enough
space between the external devices and the Unit.
Do not insert the AC power cord into the power socket outlet
before all the connections are made.
Ensure that you always have easy access to the AC power cord
or plug to disconnect the TV from the power.
Before you move the TV, disconnect attached cables to prevent
damage to connectors.
Be sure to unplug the AC power cord from the AC outlet
before moving or carrying the Unit.
•
•
•
•
•
•
•
•
•
•
•
Dew Condensation Warning
●
Dew condensation may form inside the unit in the following conditions.
If so, do not use this unit at least for a few hours until its inside gets dry.
–
The unit is moved from a cold place to a warm place.
–
Under conditions of high humidity.
–
After heating a cold room.
Regulatory Notices
Do not place the Unit on the furniture that is capable of being tilted by
a child and an adult leaning, pulling, standing or climbing on it. A falling
Unit can cause serious injury or even death.
This apparatus should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 4 inches (10cm) or more around this
apparatus.
Press to turn the Unit on and go into standby mode.
To completely turn off the Unit, you must unplug the AC power cord.
Disconnect the AC plug to shut the Unit off when trouble is found or
not in use. The AC plug shall remain readily available.
AC plug
Never use a gas duster on this TV.
The gas trapped inside of this Unit may cause ignition and explosion.
7 .English
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING: Batteries (battery pack or battery installed) shall
not be exposed to excessive heat such as sunshine,
fire or the like.
WARNING: To prevent injury, this apparatus must be securely
attached to the furniture / wall in accordance with
the instructions. Tipping, shaking or rocking the
unit may cause injury / death.
Environmental Care
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle
the packaging.
For product recycling information, please visit - www.magnavox.com
Click on
End of Life Directives
Magnavox pays a lot of attention to produce environmental-friendly
products in green focal areas. Your new TV contains materials which
can be recycled and reused. At the end of its life, specialized
companies can dismantle the discarded TV to concentrate the
reusable materials and to minimize the amount of materials to be
disposed of. Please ensure you dispose of your old TV according to
local regulations.
Disposal of Used Batteries
The Batteries supplied do not contain the heavy metals mercury
and cadmium. Nevertheless, in many areas Batteries may not be
disposed of with your household waste. Please ensure you dispose
of Batteries according to local Regulations.
Preparing to Move/Ship the Unit
Please pack the Unit properly by following the Diagram on the
Carton.
1
2
3
4
To avoid damage to the Screen, do not pack the stand on the
same side as the TV screen.
8 .English
3 Getting Started
Features
TV
●
DTV / Analog TV / CATV
You can use your Remote Control to select channels which are Broadcast in Digital format
and conventional Analog format. Also, Cable and Satellite subscribers can access their TV
channels.
●
Information display
You can display on the TV screen the Title, contents (DTV only) and other information on
the current Program.
●
Autoprogram
This Unit Automatically scans and memorizes channels available in your area, Eliminating
difficult Setup procedures.
●
Child lock
This feature allows you to Block children’s access to inappropriate Programs.
●
Closed Caption decoder
Built-in Closed Caption decoder displays text for Closed Caption supported Programs.
●
MTS / SAP tuner
Audio can be selected from the Remote Control.
●
Auto Standby
If there is no Input Signal and no operation for 15 minutes, the Unit will go into Standby
mode Automatically.
●
Sleep Timer
You can set the Unit to go into Standby mode after a specific amount of time.
●
Choices for On-screen language
Select your On-screen language: English, Spanish or French.
●
Stereo sound function
●
PLL frequency synthesized tuning
Provides free and easy channel selection and lets you tune directly to any channel using the
number and decimal point “•” keys on the Remote Control.
●
Various adjustments for Picture and Sound
DVD
●
Dolby Digital Sound
Enjoy Dolby Digital multi-channel surround sound when you connect the Unit to your Dolby
Digital decoder.
●
Still / Fast / Slow / Step Playback
Various Playback modes are available including Still Pictures, Fast Forward / Reverse, Slow
Motion and Step Playback Frames.
●
DVD Menus in a Desired Language
You can display DVD Menus in a Desired Language, if available on a DVD-video.
●
Auto Standby
●
Parental Lock
●
Resume Playback
●
Bit Rate Indication
●
DRC (dynamic range control)
If there is no operation for 15 minutes, the Unit will go into Standby mode automatically.
Block the viewing of a DVD-video unsuitable for children.
Lets you Resume Playback from the point at which Playback was stopped.
The levels of Audio and Video Data currently being read.
You can control the range of sound volume.
Accessing from MODE key
During Playback
●
Subtitles in a Desired Language
You can select a Desired Language for displaying Subtitle, if that Language is available on a
DVD-video.
●
Selecting a Camera Angle
You can select the desired Camera Angle, if a DVD contains sequences recorded from
different Angles.
●
Zoom
fun-Link allows your other HDMI link Devices to be controlled by the HDMI cable connected
to your TV.
●
Black Level Adjustment
●
HDMI Input
●
Virtual Surround
●
HDMI-DVI Input
If your Video Device has a DVI Output jack, use an HDMI-DVI Conversion Cable to connect
the Unit.
●
Search
AV Input
●
Marker
Digital Audio Output
●
Repeat
Customizes picture quality suitable for your room and sets your sound preference.
●
●
fun-Link via HDMI link
Allows you to enlarge the size of picture image.
Brighten the Dark areas of the TV picture.
Enjoy Virtual Surround on a 2 channel Stereo System.
Chapter Search / Title Search / Track Search / Time Search
The part on the Disc designated by user can be called back.
Audio and Video Input from an External Device.
●
Digital Audio (Supporting Dolby Digital) sent to Home Theaters and other Digital Audio
systems.
●
Headphone Audio Output
Headphone 3.5mm Stereo jack for personal listening.
Chapter / Title / Track / All / A-B
Accessing from MODE key
In stop mode
●
Program Playback for Audio CD
●
Random Playback for Audio CD
You can program the order of Tracks to play them back in a designated order.
This Unit can Shuffle the order of Tracks to play them back randomly.
Accessing from SAP / AUDIO key
During Playback
●
Choices for Audio Language and Stereo Sound Function
Select your desired Languages or Stereo Sound Function when different options are available
on your Disc.
Continued on next page.
9 .English
Attaching the Base
Supplied Accessories
Owner’s Manual
You must attach the base to the Unit to have it as a table top Unit.
Be sure the front and rear of the base match the proper direction. For
large screen TVs, at least 2 people are required for these steps.
Quick Start guide
1
TV base and Screws
Remote Control
and Batteries
(AAA, 1.5V x 2)
2
Screws packed with this Unit.
1
Model
Quantity
Size
32MD304V
3
M4 x 0.551”(14mm)
AAA
AAA
2
Note(s)
●
If you lose the Screws, please purchase the above-mentioned Phillips head Screws at your
local store.
If you need to replace these accessories, please refer to the Part Name with the illustrations
and call our toll free customer support line found on the cover of this Owner’s Manual.
When using a Universal Remote Control to operate this Unit.
●
●
Make sure the component code on your Universal Remote Control is set to our brand.
Refer to the instruction book accompanying your Remote Control for more details.
●
We Do Not guarantee 100% interoperability with All Universal Remote Controls.
×
Symbols used in this Owner’s Manual
3
M4 x 0.551” (14mm)
The following is the description for the symbols used in this Owner’s
Manual. Description refers to:
Note(s)
TV FUNCTIONS
●
Digital TV Operation
Cable / NTSC (Analog) TV Operation
●
If neither symbol appears, the operation is applicable to both.
DVD FUNCTIONS
●
DVD
: Playback of DVD-video
CD
: Playback of Audio CD
Make sure to use a table which can support the weight of this Unit and is larger than this
Unit.
●
Make sure the table is in a stable location.
●
When attaching the base, ensure that “FRONT” with “arrow” written on the bottom of
the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.
●
When attaching the base, ensure that All Screws are tightly fastened. If the base is not
properly attached, it could cause the Unit to fall, resulting in injuries as well as damage to
the Unit.
●
To remove the base from this Unit, unscrew the Phillips head screws in step 2. Be careful
not to drop the base when you remove it.
If neither symbol appears under the function heading, operation is
applicable to both.
Continued on next page.
10 .English
Mounting the Unit on your furniture
Screw this Unit on your furniture tightly using a wood screw (Not
Supplied) in the hole at the back of the base as shown.
Recommended screw dimension : 3/16 x 3/4 inches (5.1 x 20 mm)
●
Rear of this Unit
Screw Hole
Note(s)
●
When you remove this Unit make sure to unscrew the wood screw from your Wood
Stand, Furniture and other wood item.
Installing the Remote Control Batteries
1
2
Slide the battery cover off the back of the Remote Control.
3
Slide the cover back into position.
Insert 2 Supplied Batteries (AAA, 1.5V). Be sure the + and – ends
of the Batteries line up with the markings inside the case.
Note(s)
●
Remove the Batteries if not using the Remote Control for an extended period of time.
Continued on next page.
11 .English
Remote Control
a
m
b
c
n
o
d
p
e
a B (POWER)
Turns the TV On from Standby or Off to Standby.
b TITLE
Opens the Title Menu.
c DISC MENU
Opens the Disc Menu.
d MODE
Sets various items during DVD / CD Playback.
e 0 - 9 (NUMBER keys)
Used to enter a Channel / Program / Chapter / Title / Track number.
+10
: Used to enter 10 or higher number of Chapters.
• (DOT)
: Use with 0-9 to select Digital channels. For example,
to enter 2.1, press
CH + / –
f
g
h
i
j
q
r
s
t
k
l
u
: Selects a Channel in the Memorized Channel Ring
(Low to High or High to Low).
f D (MUTE)
Turns the Sound On and Off.
g VOL + / –
Adjusts the Volume.
h PIC/SOUND MODE
Optimizes Picture and Sound quality.
i SLEEP
Sets Sleep Timer.
j BACK
Returns to the previous Menu operation.
k H I J K (NAVIGATION keys) / OK
Moves the cursor, Selects the On-screen Menu items.
l TV MENU
Opens the Main On-screen Menu.
m A (EJECT)
Ejects a Disc from the Disc Slot.
n SAP / AUDIO
Selects Audio mode (MONO / STEREO / SAP) / Audio language.
o CLEAR
Clears the numbers entered incorrectly.
Cancels the point A for A-B repeat.
Removes a Track number in the CD Program input.
p
H / G : Skips Backward or Forward Chapters, Titles or Tracks
on a Disc.
E/D
: Searches Backward or Forward through the Disc.
Begins Slow Forward or Slow Reverse Playback
during the Pause mode (DVD).
C
: Stops the Disc Playback.
F
: Pauses the Disc Playback.
: Begins or Restarts the Disc Playback.
K
q INFO
Displays Information about the current program or Disc.
r PREV.CH
Returns to the previously viewed Channel.
s PICTURE SIZE A
Adjusts the Picture size on the TV screen.
t SOURCE
Selects Connected Devices.
u DVD SETUP
Opens the DVD Setup Menu.
Continued on next page.
12 .English
Control Panel
a
b
c
d
e
f
g
h
i
j k l
a Disc loading slot
b B (POWER)
Turns the TV On from Standby or Off to Standby.
c SOURCE
Selects Connected Devices.
d MENU
Opens the Main On-screen Menu.
e CH H (+) / I(-)
Selects a Channel.
In the Menu screen, moves the Cursor Up H (+) / Down I (-).
f VOL J (-) / K(+)
Adjusts the Volume.
In the Menu screen, moves the Cursor Left J (-) / Right K (+).
VOL J(-) : Volume Down
VOL K(+) : Volume Up
g C (STOP)
Stops Disc Playback.
h K (PLAY)
Starts Disc Playback
i A (EJECT)
Ejects a Disc from the Disc Slot
j Disc-In Indicator
Lights up orange when the Disc is inserted.
k Remote Control Sensor
Receives IR Signal from Remote control.
l Power On / Standby Indicator
(On : no light, Standby : red light)
m Composite Video (VIDEO) Input jack for VIDEO
n Analog Audio (L/R) Input jacks
Connect Analog Audio Signals from;
– HDMI-DVI / Analog Audio (L/R) jacks Signal
Terminals
–
–
*
m
n
r s
o
p
Composite Video / Analog Audio (L/R) jacks Signal
PC Connection / Analog Audio (L/R) jacks Signal with Stereo Mini
3.5mm Plug Audio Cable on PC
o HDMI Input jack(s)
Digital Audio and Video Input from High Definition Digital Devices
such as DVD / Blu-ray Disc players, Cable / Satellite Set-top Boxes
and PC’s.
p 75 ohm Cable / Antenna / Satellite connection
Signal Input from an Antenna or Cable / Satellite Set-top Boxes.
q Headphone Audio Output jack
Headphone 3.5mm Stereo jack for personal listening.
r Digital Audio Output jack
Digital Audio (S/PDIF) Output to Home Theaters and other Digital
Audio systems.
s PC Input jack
VGA cable Connection for PC.
* USB Service Port (service use only)
Use this port only when a software upgrade is necessary. User should not
connect any devices to the service port such as digital camera, keyboard,
mouse, etc. (because these will not work). The software upgrade is, in
most cases, handled by an authorized service person or in some
circumstances the user may be asked to do the software upgrade
themselves.
q
Continued on next page.
13 .English
Connecting the Antenna, Cable or Satellite
Be sure your Antenna or another Device is connected properly before
plugging in the AC Power Cord.
If connecting to an Antenna through an RF cable
Connecting a Set-top Box, Blu-ray Disc / DVD Recorder
via Composite Connectors and Analog Audio
Do Not place your Recorder too close to the Screen because some
Recorders can be susceptible to Signals from the TV.
Any DTV Programs that are Broadcast in your area can be received for
free through an Antenna Connection.
OUT
Cable
RF cable
Set-top Box
IN
Cable
IN
IN
antenna
OUT
OUT
RF cable
OUT
IN
IN
OUT
RF cable
Video cable +
Audio (L/R) cables
If you connect a Set-top Box through an RF cable
If the TV is connected to a Cable / Satellite Set-top Box via a Coaxial
Connection, set the TV to channel 3/4 or the channel specified by the
service provider.
RF cable
antenna
Note(s)
●
If you have any question about the DTV’s Antenna, visit www.antennaweb.org for further
information.
●
Depending on your Antenna system, you may need different types of combiners (mixers)
or separators (splitters) for HDTV Signal. The minimum RF bandpass on these Devices is
2,000MHz or 2GHz.
●
For your safety and to avoid damage to this Unit, please unplug the RF Coaxial Cable from
the Antenna Input jack before moving the Unit.
●
If you did use an Antenna to receive Analog TV, it should also work for DTV reception.
Outdoor or attic Antennas will be more effective than a Set-top Box or inside Antenna.
●
To Turn On your reception source easily between Antenna and Cable, Install an Antenna
selector.
●
If you are not receiving a Signal from your Cable service, contact the Cable provider.
IN
IN
OUT
RF cable
Set-top Box
Blu-ray Disc /
DVD Recorder
If connecting a Set-top Box through an HDMI cable
Plugging in the AC Power Cord
If the TV is connected to a Cable / Satellite Set-top Box via an HDMI
cable, make sure you select the correct Source by using SOURCE key on
TV or Remote Control.
Make sure All the Necessary Connections are made before the AC Power
Cord is plugged into an AC outlet.
Caution(s)
●
Do Not connect the AC Power Cord to an AC Power Supply outside the indicated voltage
of this Unit (120V AC).
●
Connecting the AC Power Cord to a Power Supply outside of this range may result in
Unit failure, degradation or electrical shock.
RF cable
IN
IN
OUT
HDMI cable
Note(s)
Set-top Box
●
Each time you plug in the AC Power Cord, no operations will be performed for several
seconds. This is not a malfunction.
Continued on next page.
14 .English
No supplied cables are used with these connections:
●
Connecting your Devices
Please purchase the Necessary Cables at your local store.
Before you connect the AC Power Cord:
Be sure other Devices are connected properly before plugging in the AC
Power Cord.
Selecting your Connection quality
HDMI Digital Connection
HDMI Connection offers the Highest Picture quality.
HDMI (High-Definition Multimedia Interface) transports high definition
Digital Video and multi-channel Digital Audio through a single cable.
Set-top Box
or
HDMI - Highest quality
OUT
IN
HDMI cable
HD game console
Supports high-definition Digital signals and gives highest picture and sound
quality. Video and Audio signals are combined in one cable. You must use
HDMI for full high-definition Video and to enable fun-Link (HDMI CEC).
Note(s)
●
MAGNAVOX HDMI supports HDCP (High-bandwidth Digital Contents Protection).
HDCP is a form of Digital Rights Management that protects high definition content in Blu-ray
Discs or DVDs.
Blu-ray Disc /
DVD Player
or
HDMI-DVI Connection
This Unit can be connected to your Device that has a DVI Terminal.
Use an HDMI-DVI Conversion Cable for this Connection and it requires
Audio Cable for Analog Audio signal as well.
Composite - Basic quality
For Analog Connections. Composite Video / Audio Analog cable usually
combine a yellow Video Cable with red / white Audio (L/R) Cables.
IN
Audio (L/R) cables
OUT
IN
HDMI-DVI
conversion cable
OUT
Cable Receiver
or
Satellite Set-top Box
with the DVI Output jack
Note(s)
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable
is recommended for the Better compatibility.
For HDMI Connection
●
●
The Unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of Video signals, 32kHz /
44.1kHz and 48kHz of Audio signals.
●
This Unit accepts 5.1 channel Audio signal (Dolby Digital) and 2 channel Audio signal
(LPCM).
●
The Unit does not play 7.1 ch Audio signals. With the connection via an HDMI cable, 7.1
ch Audio will be output as 5.1ch Audio signal.
● This Unit accepts only signals in compliance with EIA861.
For HDMI-DVI Connection
●
The Unit accepts 480i, 480p, 720p, 1080i and 1080p Video signals.
●
HDMI-DVI Connection requires separate Audio Connections as well and the Audio signals
are Output as Analog (L/R) Audio.
●
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
Continued on next page.
15 .English
Composite Analog Video Connection
PC Connection
Composite Analog Video Connection offers Standard Picture quality for
Video Devices connected to the Unit.
HDMI Connection
If you connect to the Unit’s Composite Video (VIDEO) Input jack, connect
Audio Cables to the Audio (L/R) Input jacks. When the Audio is monaural,
then only connect to the Audio L Input jack.
IN
This Unit can be connected to your PC that has an HDMI terminal.
Use an HDMI cable for this Digital Connection.
Video cable +
Audio (L/R) cables
OUT
IN
HDMI cable
OUT
PC
DVD Player
HDMI-DVI Connection
This Unit can be connected to your PC that has a DVI Terminal.
Use an HDMI-DVI Conversion Cable for this Video Digital Connection
and it requires Stereo mini 3.5mm Plug Audio Cable for Analog Audio
signal as well.
Digital Audio Output Connection
Stereo Mini 3.5 mm Plug
Audio cable
OUT
IN
If you connect this Unit to an External Digital Audio Device, you can enjoy
multi-channel Audio like 5.1ch Digital Broadcasting sound.
Use a Digital Audio Coaxial Cable to connect the Unit to External Digital
Audio Devices.
HDMI-DVI
OUT
conversion cable
IN
PC
VGA Connection
OUT
IN
Digital Audio
Coaxial cable
Digital Home Theater
Amplifier
This unit is equipped with a PC Input jack. If you connect this Unit to your
PC, you can use this Unit as a PC monitor.
Use a VGA cable for this Video Connection and it requires a Stereo mini
3.5mm Plug Audio Cable for Analog Audio signal as well.
IN
IN
Stereo Mini 3.5 mm Plug
OUT
Audio cable
VGA cable
PC
OUT
The following Video signals can be displayed:
Format
Resolution
Refresh rate
VGA
SVGA
XGA
640 x 480
800 x 600
1,024 x 768
1,280 x 768
1,360 x 768
60Hz
WXGA
Other formats or non-standard signals will not be displayed correctly.
Note(s)
●
Please purchase the HDMI-DVI Conversion Cable that has a ferrite core.
●
The following operations may reduce noise.
–
Attach a ferrite core to the AC Power Cord of your PC.
–
Unplug the AC Power Cord and use the built-in battery of your Portable / Laptop PC.
●
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable
is recommended for the Better compatibility.
●
The Unit accepts 480i, 480p, 720p, 1080i and 1080p Video signals.
●
HDMI-DVI Connection requires separate Audio Connections as well and the Audio signals
are Output as Analog (L/R) Audio.
●
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
Continued on next page.
16 .English
These Operations are accessible by Remote Control.
Some may also be accessible by the Main Unit's Control Panel.
4
Initial Setup
Use H I to select the desired Location setting, then press OK.
Home is the ENERGY STARN qualified setting.
Initial setup
Retail
This section will guide you through the Unit’s Initial setting which includes
selecting a Language for your On-screen Menu and Autoprogram, which
Automatically scans and memorizes viewable channels.
Before you begin:
Location Home is recommended for normal home use
and is ENERGY STAR qualified.
In the Retail store mode, all settings are fixed.
Home
Make sure the Unit is connected to an Antenna or Cable.
1
After making All the Necessary Connections, press B to Turn On
the Unit.
●
It may take a few moments to Turn On the Unit for the first time.
Select
Initial setup menu appears Automatically after the Unit is Turned
On.
Use H I to select the On-screen language from the choices
(English / Español / Français) on the right side of the TV screen, then
press OK.
OK
●
2
3
●
Use H I to select Antenna for TV channels or Cable for CATV
channels, then press OK.
●
Initial setup
●
Make sure the antenna is connected to "ANTENNA IN"
jack.
Select your signal source.
Antenna
Cable
Antenna
Cable
Skip
●
Or
–
–
●
OK
Back
Skip
When Antenna is selected, the TV detects Antenna signals. It
searches for DTV and Analog TV channels available in your area.
When Cable is selected, the TV detects signals supplied by
Cable. It searches for DTV, Analog TV and Cable channels
available in your area.
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
0%
Analog channels
0 ch
Skip
Select Retail, the Unit will be set up with predefined settings for
retail displays. In this setting, the Power Consumption may possibly
exceed the limited requirement limit of the ENERGY STARN
qualification.
●
If you are not receiving a signal from your Cable service, contact the Cable provider.
●
If you press B or MENU during Autoprogram, this Setup of TV channels will be Cancelled.
●
The Initial Autoprogram function can be executed for either Antenna or Cable only Once.
When you change the Connection (Antenna / Cable), select Autoprogram again.
L p. 23
●
If there is no signal Input from the Antenna terminal and no operation for several seconds
after you Turn On the Unit, Helpful hints appears. Follow the instructions listed on the
TV screen.
No channel is registered.
Try Autoprogram again?
Verify that you have a cable connected to the
ANTENNA IN jack on the back of the TV, the channel
installation process searches this connection.
If you are using a cable or satellite box, please confirm
the input which you have connected to the box and
press "SOURCE" key on the remote control to select
the appropriate source input.
Initial setup
0 ch
When the Initial setup is completed, the Lowest Memorized
Channel with the confirmation message of the Location setting will
be displayed on the TV screen.
Initial setup
Autoprogram will begin.
Digital channels
You must set Home in step 4. Otherwise, Picture and Sound
settings you adjusted will not be memorized after the Unit goes
into Standby mode.
Note(s)
ANTENNA IN
Select
Select Home, the Unit is set to maximize the energy efficiency for
home setting and it can be adjusted through a choice of Picture
and Sound quality according to your preference. Use this setting
to remove the E-sticker, if visible on the display. L p. 29
Select
OK
Retry
Later
Skip
After an Initial Setup is completed...
●
●
●
●
If you want to scan the channels Automatically again.
Autoprogram L p. 23
You can add the desired Cable and Analog channels not memorized by
Autoprogram.
Add channels L p. 24
If you want to change to another Language.
Language L p. 30
If you want to change the Location setting.
Location L p. 29
17 .English
4 Use your TV
Switching Channels
Switching on your TV and putting it in Standby
mode
* Control Keys are on the Side of the Unit
* Control Keys are on the Side of
the Unit
TV
Remote Control
To Turn the TV On from Standby or Off to Standby
Press B on the Side of the Unit or the Remote Control.
●
Note(s)
●
Energy Consumption contributes to air and water pollution. When the AC Power Cord
is plugged in, your TV consumes energy with a very low standby Power Consumption.
Adjusting Volume
TV
To select Channels by using CHI (+) / H(-) or CH + / –
Press CH I(-) (Down) / H(+) (Up) on the Side of the Unit or press
CH + / – on the Remote Control.
●
To select Channels by using the NUMBER keys
* Control Keys are on the Side of the Unit
Digital TV Operation
For Digital channels, press a number followed by a dot “•” and the
corresponding sub channel number.
●
–
TV
Remote Control
When selecting Digital channel 11.1
Be sure to press • before entering the subchannel number.
Remote Control
To decrease or increase Volume
●
Press VOL J (-) / K(+) on the Side of the Unit or press VOL + / – on
the Remote Control.
VOL J(-) : Volume Down
VOL K(+) : Volume Up
Cable / NTSC (Analog) TV Operation
–
When selecting Cable or Analog channel 11
To mute or unmute sound
●
Press D on the Remote Control to Mute the sound.
●
Press D again on the Remote Control or VOL + / – to recover the
original sound.
Press PREV.CH to return to the previously viewed channel.
Note(s)
●
To select the non-memorized Channel list channels, use the NUMBER keys.
●
No signal will appear on the TV screen after the subchannel broadcast is over.
●
Audio only program message will appear on the TV screen, when you receive only a
sound signal.
18 .English
Watching Channels from an External Device
Switching Each Input Mode can easily switch with the Remote Control
between TV (DTV or Analog TV) and External Devices when they are
connected to the Unit.
1
Turn On the Set-top Box or the Connected Device.
The picture from the Set-top Box or the Connected Device might
appear Automatically on the TV screen.
If the picture does not appear
Sleep Timer
Sleep Timer can set the Unit to go into Standby mode after an incremental
period of time.
●
Press SLEEP Repeatedly to change the amount of time
(increments the time by 30 minutes up to 120 minutes).
Sleep timer 120 min.
Press SLEEP Once to call up the display for checking the remaining time.
To cancel Sleep Timer, press SLEEP Repeatedly until Off is displayed.
●
① Press SOURCE Repeatedly to select the Set-top Box or the
Connected Device and wait a few seconds between each selection
until the Picture appears.
●
Pressing H reverses the direction of the Input modes.
Switching Audio Mode
e.g.)
11.1
Source
TV
HDMI1
HDMI2
Video
PC
HDMI1
HDMI2
DTV / Analog TV
channel
PC
Digital TV Operation
Video
or
Component
1
2
② Use the Remote Control for the Set-top Box or the Connected
Device to select Channels to view.
and Sound setting.
2
11.1
English 1/3
Note(s)
●
Changing Picture and Sound Settings
1 Press PIC/SOUND MODE to set your TV to a predefined Picture
Press SAP / AUDIO to display the currently selected
Language and the number of available Languages.
Press SAP / AUDIO Repeatedly to cycle through
the available Audio Languages.
●
Available Languages differ depending on the Broadcast.
Other is displayed when the Audio Language cannot be found or available Languages are
other than English, French or Spanish.
Cable / NTSC (Analog) TV Operation
1
2
Press SAP / AUDIO to display the currently selected Audio mode.
While receiving an MTS broadcast, press SAP Repeatedly
to cycle through the available Audio Channels.
11
SAP / STEREO
e.g.) When All Audio Modes are available
Use H I to select one of the following settings :
Auto
picture
Auto sound
Description
Personal
The Customized Settings you defined
using the Picture and Sound menu
Standard
For normal TV viewing
Vivid
Enhanced picture contrast, sharpness and
sound for viewing in a well-lit room
Sports
Brilliant picture settings and clear sound
for high action
Movie
Deep picture and powerful sound settings
for a cinematic experience
Game
–
Optimized for PCs and game consoles
Eco
–
Eco TV settings for low Power
Consumption
–
Music
Optimized for Music Playback
–
News
Controls Picture Tone and Sets the
Anchor's Voice at a comfortable volume
level
SAP / STEREO
Stereo
SAP
Mono
SAP / MONO
SAP / STEREO
: Outputs Stereo Audio
: Outputs a Second Audio Program
: Outputs Mono Audio
Continued on next page.
19 .English
Changing Picture Format
Refer to 16:9 Video Signal on this page if the PC has an HDMI Output.
●
Normal
Display Modes can be Selected when your TV receives a 16:9 or 4:3 Video
Signal.
Three types of Display Modes can be Selected for a PC Input Signal.
Press PICTURE SIZE A Repeatedly to Switch the TV Aspect Ratio.
Full
Unscaled
Proportionately stretched picture.
Sidebars appear on both edges of the screen.
Stretched out of proportion to fill the screen.
Original size.
TV Screen information
You can display the currently selected channel or other information such
as the aspect ratio on the TV screen.
In the Digital mode, the detailed broadcasting information for the current
off the air channel, such as Program title, are displayed.
For 16:9 Video signal
1
Press INFO.
Digital TV Operation
Normal
4:3
Movie expand
a
Full can also be selected
after Wide if an HDMI
Device is selected. This
picture format similarly
displays like Normal.
Full
(HDMI Device only)
Normal
4:3
Movie expand
Zoom
Wide
b
A Day of Memories
Wide
Rating information:
US TV : TV-MA
US TV : TV-14
US TV : TV-PC
US TV : TV-G
Zoom
Original size.
Shortened horizontally.
Sidebars appear on both edges of the screen.
Vertically stretched to fill the screen.
This only crops out the top of the picture.
Maximum size without changing its horizontal and
vertical ratio.
Horizontally stretched picture.
This crops out the left and right sides of the picture.
c
KABC
US movie : X
US movie : NC-17
US movie : R
US movie : PG-13
11.1
English 1/2
1080i
HD
Cable / NTSC (Analog) TV Operation
c
11
SAP / STEREO
480i
16:9
Movie expand
Full can also be selected
after Wide if an HDMI
Device is selected. This
picture format similarly
displays like 16:9.
Normal
16:9
Movie expand
Zoom
Wide
Wide
Zoom
Original size.
Sidebars appear on both edges of the screen.
Stretched horizontally to fill the screen.
Stretched more vertically at the top of the screen.
This crops out the top of the picture.
Maximum size that is more vertically stretched to fill the
screen.
This crops out the top and bottom of the picture.
Original size and the edges stretched horizontally to fill
the screen.
SD
●
4:3
CC
d
e
f
g
c Channel Number
Switching channels L p. 17
d Audio Language (DTV) / Audio mode (Analog TV)
Switching Audio Mode L p. 18
e Program’s image Aspect Ratio
Changing Picture Format L p. 19
f CC (Not available if Closed Caption is set to Off)
Caption settings L p. 24
g Child Lock rating
Child and Ratings Lock L p. 26
2
Press INFO to hide the information.
Note(s)
●
●
While the TV screen information is displayed, the Closed Caption function is interrupted.
In External Input mode, the following screen is displayed;
Video
e.g.) When an External Device is connected to Video Input jack.
480i
SD
TV-PG DLSV
For PC Input signal
Normal
e
f
a Program title
b Broadcast station
TV-PG DLSV
Full
(HDMI Device only)
CC
g
For 4:3 Video signal
Normal
16:9
Rating
d
●
Full
Unscaled
This Unit can also be connected to your PC that has a DVI Terminal.
Use an HDMI-DVI Conversion Cable for this Video Connection and it
requires a Stereo Mini 3.5mm Plug Audio Cable for Analog Audio signal
as well.
The information display will Automatically disappear in 5 seconds.
4:3
CC
5 Making more use with your TV
20 .English
2
This section describes the overview of the Main Menu displayed when
you press TV MENU.
The Main Menu consists of the function setting items below.
Use H I to select the desired Menu and an item, then press OK or
use H I J K to determine the setting.
Picture
L p. 21
Adjusting the Picture Mode or customize the Picture quality as
your preference.
Displaying the Main Menu
1 Press TV MENU to display the Main Menu.
Sound
L p. 22
Adjusting the Sound Mode, Equalizer and some other Sound
functions.
Setup
Picture
Sound
Setup
Features
Language
USB
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
L p. 23
Scanning the Channels available in your area and see what the
Antenna Signal levels are.
Personal
18
50
30
30
0
2
Features
L p. 24
Adjusting the Closed Caption, Parental Guide and some other
useful functions.
Language
L p. 30
You can choose English, Spanish or French as your On-screen
Language.
3
When the Setting is completed, press TV MENU or BACK to Exit.
Continued on next page.
21 .English
Picture
●
Before you begin:
You must set Location to Home. L p. 29
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press TV MENU and use H I to select Picture, then press OK.
Picture
Sound
Setup
Features
Language
USB
2
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
Personal
You can set a Particular Picture Quality using Advanced
settings.
Picture
Sound
Setup
Features
Language
USB
18
50
30
30
0
2
Auto picture
J Cursor
Backlight
to Increase Power
Consumption and
Brightness
Contrast
to Decrease Contrast
to Increase Contrast
Brightness
to Decrease Brightness to Increase Brightness
Color
Tint
Sharpness
Advanced settings
to Decrease Color
Intensity
to Increase Color
Intensity
to Add Red
to Add Green
to Soften
to Sharpen
to Select the desired Setting, then press OK.
(Color alignment, Noise reduction, Black
stretch, Dynamic contrast and Gamma)
On
Gamma2
J Cursor
Color
alignment
Cursor K
to Reduce Power
Consumption and
Reduce Backlight
Brightness
Noise reduction
Black stretch
Dynamic contrast
Gamma
to set the picture color temperature to
Personal (Cool, Normal or Warm)
Color
When you adjust the following
temperature
settings, Personal picture will be set
mode
Automatically when Location is set to
Home.
Use H I J K to select the item you want to adjust, then press
OK.
to select the desired setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Game
and Eco)
When you adjust the following settings, Personal
picture will be set Automatically when Location
is set to Home.
Normal
On
On
Color alignment
Noise
reduction
Black stretch
Dynamic
contrast
Red gain
to Increase Red
Contrast
Green gain
to Decrease
Green Contrast
to Increase Green
Contrast
Blue gain
to Decrease Blue
Contrast
to Increase Blue
Contrast
Red offset
to Decrease Red
Brightness
to Increase Red
Brightness
Green
offset
to Decrease
Green Brightness
to Increase Green
Brightness
Blue offset
to Decrease Blue
Brightness
to Increase Blue
Brightness
Off
to Set Noise reduction to Off
On
to Reduce Noise in an Image
Off
to Set Black stretch to Off
On
to Enhance Black Color
Off
to Set Dynamic contrast to Off
On
to Enhance Contrast in an Image
Automatically
Gamma1
Gamma
Cursor K
to Decrease Red
Contrast
Gamma2
Gamma3
to Change the Gamma setting
(changes the Brightness and Contrast
in the picture)
Continued on next page.
22 .English
Sound
Before you begin:
You must set Location to Home. L p. 29
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press TV MENU and use H I to select Sound, then press OK.
Picture
Sound
Setup
Features
Language
USB
2
Auto sound
Equalizer
DTS TruSurround
Auto volume leveling
TV speakers
Digital output format
Primary MTS
Standard
On
Off
On
Multichannel
Stereo
You can select Audio Output through a Digital Audio Output connector.
to Output Multichannel Signals
Multichannel (When the Audio of the Content
Digital output
is PCM, it will be Output in PCM
format
even if Multichannel is selected.)
PCM
to Output PCM format.
You can set the Output mode as a default for the Sound mode (Analog
TV only).
This setting is not interlocked when you change the Output mode by
pressing SAP / AUDIO. Refer to Switching Audio Mode. L p. 18
Stereo
to Output Stereo Audio
Mono
Primary MTS
to Output Mono Audio
SAP
to Output Second Audio Program
Use H I J K to select the item you want to adjust, then press
OK.
Auto sound
to select the desired setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie, Music
and News)
When you adjust the following settings
(Equalizer, DTS TruSurround and Auto volume
leveling), Personal sound will be set
Automatically when Location is set to Home.
Adjust the tonal quality for each frequency.
Cursor I
Equalizer
Cursor H
to adjust each level of tonal quality.
Press BACK to go back to the previous menu.
This selects Sound Modes for more spatial or Surround Sound
reproduction.
Off
to set DTS TruSurround™ to Off
DTS TruSurround
On
to set DTS TruSurround™ to On
This function keeps a constant loudness level between the TV
commercials and the Programs.
to Remove the Auto volume
Off
leveling
Auto volume
to Reduce Volume Differences
leveling
On
between the TV Commercials and
the Programs
You can select the Audio Output from the Unit’s speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this Unit, some sound operations such as volume up can be
changed by using this Unit’s Remote Control.
to Output Sound from the Unit’s
On
Speakers
No Output Sound from the Unit’s
Off
Speakers
TV speakers
to Control Audio Output from
your connected fun-Link (HDMI
CEC Link CEC) Compliant Devices with
VOL + / – by using this Unit's
Remote Control.
Continued on next page.
23 .English
Setup
Autoprogram
Before you begin:
Please wait while the system is scanning for
channels.
Auto programming may take more than 20 minutes
to complete.
75%
Make sure the Unit is connected to Antenna or Cable.
1
Press TV MENU and use H I to select Setup, then press OK.
Picture
Sound
Setup
Features
Language
USB
Autoprogram
Channel list
Add channels
Antenna
Digital channels
10 ch
Analog channels
6 ch
Exit
When the Scanning and Memorizing of Available Channels is
Completed, the Lowest Memorized Channel will be Displayed.
●
Note(s)
2
Adjust the following items.
Autoprogram
Be sure the RF cable is correctly connected to this Unit and you are
registered with your Cable TV provider when you Install Cable channels.
1
Use H I to Select Autoprogram, then press OK.
2
If you run Autoprogram when you have Locked Channels, a
Message appears asking to enter your PIN. Enter your Child Lock
PIN in order to Complete the Installation. (Default PIN code is 0,
0, 0, 0.) You need to reset or set the Channel Lock again after the
Installation.
Use H I to Select an appropriate Option, then press OK.
●
–
–
When Antenna is selected, the TV Detects Any Off-the-Air
Antenna Signals. It searches for ATSC (Digital) and NTSC
(Analog) Channels available in your Area.
●
After setting Autoprogram, using CH + / – skips unavailable channels Automatically.
●
If you are not receiving a signal from your Cable service, contact the Cable provider.
●
If you press B or TV MENU during Autoprogram, the Setup of TV channels will be
Cancelled.
●
Even if Autoprogram is completed, the channel setting will be lost if the AC Power Cord
is unplugged before the Unit goes into Standby mode by pressing B.
●
The PIN Code will be required Once you set a PIN code in the Child and Ratings Lock.
L p. 26
●
If you want to change your PIN code, follow the instruction for Change PIN. L
p. 28
Channel list
The channels selected here can be skipped when selecting the channels
using CH + / –.
Those channels can still be selected with the NUMBER keys.
1
2
When Cable is selected, the TV detects signals supplied by
Cable. It searches for DTV, Analog TV and Cable channels
available in your area.
Picture
Sound
Setup
Features
Language
USB
Auto program will rescan all channels.
Auto programming may take more than 20
minutes to complete.
Use H I to select Channel list, then press OK.
Use H I to select the channel you want to remove, then press
OK.
Picture
Sound
Setup
Features
Language
Back
Antenna
Cable
Highlight channels for Ch Up/Down
key selection.
DTV
DTV
DTV
11.1
11.2
11.3
USB
Select your signal source.
Antenna
Ch Select
Cable
Or
●
ANTENNA IN
●
●
Watch / Skip
Back
The channel display for the removed channel darkens. You will not
be able to select the channel again using CH + / –.
To reactivate a removed channel, use H I and press OK. The
registered channels are highlighted.
When you remove a main channel, its subchannels are removed
as well.
Note(s)
●
The channel with DTV indicated on the display is ATSC. Otherwise the channel is Analog
TV (NTSC).
Continued on next page.
24 .English
Add channels
Features
This function lets you add the off the air Analog TV or Analog Cable
channels that were not added by the Autoprogram due to reception
conditions during the Initial Setting.
1
1
2
Picture
Sound
Setup
Features
Language
USB
Use H I to select Add channels, then press OK.
Use the NUMBER keys to enter the number of the channel you
want to add, then press OK.
Picture
Sound
Setup
Features
Language
USB
Add channels
For analog channels, select a channel
to be added using number keys.
For digital channels, Autoprogram
function is required.
####
####
2
Back
Ch Change
Press TV MENU and use H I to select Features, then press OK.
Caption settings
Child lock
PC settings
fun-Link (HDMI CEC)
Location
E-sticker
Software upgrade
Home
--
Adjust the following items.
Caption settings
Closed Captions displays the Audio portion of the Program as
Superimposed Text over the Video.
Note(s)
●
If Setup completes successfully, Added to the channel list. is displayed.
●
If External Input is used, it is not possible to register the channel and Unavailable will be
displayed on the TV screen.
●
Some channels cannot be selected by CH + / –. Use the NUMBER keys to select the
non-memorized Channel list channels.
Antenna Confirmation
1
Use H I to Select Caption settings, then press OK.
Picture
Sound
Setup
Features
Language
Closed captions
Caption service
Digital caption service
Caption style
Off
CC-1
CS-1
USB
Digital TV Operation
This function lets you check the Digital signal strength of each channel.
1
2
Use H I to select Antenna, then press OK.
Use the NUMBER keys or CH + / – to select the channel for which
you want to check the Digital signal strength.
Picture
Sound
Setup
Features
Language
USB
Back
Use H I J K to select the Feature you want to use, then press
OK.
You can choose the Closed Caption display.
Off
Closed Caption is not displayed.
Closed captions
Current
On
CC w/
mute
Max
Closed Caption is always
displayed.
Closed Caption is displayed when
the Sound is Off.
Digital TV Operation
Ch Change
Note(s)
●
2
If the channel is set to an Analog channel or External Input, you cannot confirm the Antenna
condition.
In addition to the basic Closed Caption, DTV has its own Closed Caption
called Digital caption service. Use this menu to change the settings for
Digital caption service.
Digital caption
service
CS-1 to
CS-6
Select one of these before
changing any other item in
Caption settings menu. Choose
CS-1 under normal conditions.
Continued on next page.
25 .English
Note(s)
Cable / NTSC (Analog) TV Operation
CC-1 and
T-1
Caption service
CC-3 and
T-3
CC-2,
CC-4, T-2
and T-4
●
The primary Closed Captions and
Text Services. The Closed
Captions or Text is Displayed in
the same Language as the
Program’s Dialog (up to 4 lines of
script on the TV Screen).
Serve as the preferred Data
Channels. The Closed Captions or
Text is often a Secondary
Language.
Rarely available and Broadcasters
use them only in Special
conditions, such as when CC-1
and CC-3 or T-1 and T-3 are Not
available.
●
Closed Caption will NOT be displayed when you are using an HDMI Connection.
●
Digital caption service that you can switch differs depending on the broadcast description.
●
Caption style will not have any effect if the User setting is set to Off.
●
Closed Captions Service may not be controlled by this Unit’s Menu options if you are watching
television through an External Cable or Satellite Set-top Box. In which case you will need to
use the Menu options on the External Set-top Box to control Closed Captions.
●
The Captions do not always use correct Spelling and Grammar.
Not all TV Programs and product Commercials include Closed Captions information.
Refer to your area TV Program Listings for the TV Channels and times of Closed Captions
shows. The Closed Captions Programs are usually noted in the TV Listings with a Service
Mark such as CC.
●
Not all Closed Captions Services are used by a TV Broadcaster during the Transmission
of a Closed Caption Program.
●
To show the Closed Caption on your TV screen, Broadcast signal must contain the Closed
Caption data.
●
Captions and texts may not exactly match the TV voice.
●
Changing channels may delay the Closed Caption for a few seconds.
●
Adjusting or muting the volume may delay the Closed Caption for a few seconds.
●
Abbreviations, symbols and other grammatical shortcuts may be used in order to keep
pace with the on-screen action. This is not a malfunction.
●
The caption or text characters will not be displayed while the main menu or functions
display is shown.
●
If a black box appears on the TV screen, this means that the Closed Caption is set to the
text mode. To clear the box, select CC-1, CC-2, CC-3, or CC-4.
Refer to Caption Settings: L p. 24
●
If the Unit receives poor quality television signals (mainly when the Analog (NTSC) is
received), the captions may contain Errors or there might be no captions at all. Some
possible causes of poor quality signals are:
There are 3 Display modes according to Programs:
Paint-on
Displays Characters on the TV screen
immediately.
Pop-on
Once Characters are Stored in Memory, they are
Displayed All at Once.
Roll-up
Displays the Characters Continuously by
Scrolling (max. 4 lines).
You can choose the Font (Size, Color, etc), Background and other
Characteristics of the Closed Captions Text.
User
setting
Off
Caption style will
not have any effect.
On
Caption style can
be changed.
Font style
Closed Captioning
font style, size,
color and
transparency
(opacity) can be
changed.
Font size
Font
Font color
Font
opacity
Caption style
–
Automobile ignition noise
–
Electric motor noise
–
Weak signal reception
–
Multiplex signal reception (ghosts or screen flutter)
–
Data dropout and Pixelation (for DTV only)
●
The Unit retains the Closed Caption setting if the Power fails.
●
When the Unit receives special effects Playback signal (e.g. Search, Slow and Still) from a
VCR’s Video Output channel (ch3 or ch4), the Unit may not display the correct caption
or text.
●
The EUT setting that satisfies § 79.102 (e) is as follows:
–
Font: Mono-font
–
Character Size: Large
Background Background color
color
and transparency
Background
(opacity) of the
Background
displayed caption
opacity
can be switched.
Edge color Edge color and
type of the
Edge
Edge type displayed caption
can be switched.
Picture display
S o, you
yo u m u st
st be P
Ph
h il
i l ip.
i p. H ii!!
I ’m pl
e a se d to m eet
p l ea
e et you.
yo u.
Font
(Font style, Font size, Font color and Font opacity)
Edge
(Edge color and Edge type)
Background
(Background color and Background opacity)
●
Review your setting choice made above by looking in the upper right
corner of the displayed setting box (not All selections show the
differences selected).
Continued on next page.
26 .English
Channel lock
Child and Ratings Lock
You can prevent your children from watching certain Programs or certain
Channels by locking the TV Controls and by using Ratings.
1
Use H I to select Child lock, then press OK.
Picture
Sound
Setup
Features
Language
USB
2
Caption settings
Child lock
PC settings
fun-Link (HDMI CEC)
Location
E-sticker
Software upgrade
Home
--
Use the NUMBER keys to enter the 4-digit numbers for your PIN
code.
●
When you have not set up your PIN code, enter 0, 0, 0, 0.
●
When the PIN code is correct, Child lock menu is displayed.
Particular Channels or External Input modes can be invisible in this
function.
3
4
Use H I to Select Channel lock, then press OK.
Use H I to Select the Particular Channels or External Input, then
press OK Repeatedly to Switch between Block and View.
●
G indicates that the Channel or Input Source is Locked (Block).
●
E indicates that the Channel or Input Source is Not Locked
(View).
Picture
Sound
Setup
Features
Language
HDMI1
HDMI2
Video
PC
40.1
DTV
40.2
DTV
See the following description for setting each item.
Picture
Sound
Setup
Features
Language
USB
Channel lock
US movie ratings lock
US TV ratings lock
Canadian English rating
Canadian French rating
Region ratings lock
Clear region ratings lock
Change PIN
Note(s)
●
When you select a rating and set it to G or E, the higher ratings will be Blocked
Automatically. The lower ratings will be available for viewing.
●
When you set the highest rating to E, All ratings turn to E Automatically.
●
To Block any inappropriate programs, set your limits in US movie ratings lock, US TV
ratings lock and Region ratings lock.
●
The Child Lock setting will be retained after a Power failure or after the Power is removed
for longer than 10 seconds (except the PIN code reverts to 0000).
Child and Ratings Lock L p. 26
●
Region ratings lock and Clear region ratings lock will be available when the Unit receives
a Digital broadcast using the New rating system.
●
For the United States, the Unit may download the Region Ratings Lock Table, if required.
●
The Canadian rating systems on this Unit are based on CEA-766-A and CRTC policy.
Continued on next page.
27 .English
To set the Sub ratings
Setting US Movie and TV Ratings
US Movie Ratings Lock is the Rating System created by MPAA.
US TV Ratings Lock has Controlled Access to Individual Programs based
on their Age and Content rating.
3
Use H I to Select US movie ratings lock or US TV ratings lock,
then press OK.
4
Use H I to Select the Desired Rating, then press OK Repeatedly
to Switch between Block and View.
●
●
●
As for TV-Y7, TV-PG, TV-14 or TV-MA, you can further set the Sub
ratings to Block Specific Elements within programs. To set the Sub ratings,
follow the step below.
Use H I J K to select the desired rating, then press OK Repeatedly to
switch between G and E.
Picture
Sound
Setup
Features
Language
USB
For US TV Ratings, you can further set the Sub Ratings to Block
Specific Elements within Programs.
G or F indicates that the Rating is Locked.
E indicates that the Rating is Not Locked (View).
US movie ratings lock
All
(FV)Fantasy Violence
None
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Picture
Sound
Setup
Features
Language
USB
All
NR
G
US TV ratings
Sub rating
PG
TV-Y7
(FV)Fantasy Violence
PG-13
TV-PG
(D)Dialog
(L)Language
(S)Sex
(V)Violence
R
TV-14
NC-17
X
TV-MA
US TV ratings lock
(L)Language
(S)Sex
(V)Violence
Note(s)
Picture
Sound
Setup
Features
Language
USB
●
Blocked Sub Rating will appear beside the Main Rating category in US TV ratings lock
Menu.
None
●
You cannot Block a Sub Rating if the Main Rating is set to E.
TV-Y
●
Changing the Category to G or E automatically changes All its Sub Ratings to the same
(G or E).
All
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
US Movie
ratings
US TV
ratings
All
Description
All Ratings Locked including No Rating
NR
None
No Rating
–
TV-Y
Appropriate for All Children
–
G
TV-Y7
Appropriate for All Children 7 and Older
TV-G
General Audience
PG
TV-PG
Parental Guidance Suggested
PG-13
Unsuitable for children under 13
–
–
TV-14
R
–
NC-17
–
TV-MA
X
Unsuitable for children under 14
Restricted under 17 Requires
Accompanying Parent or Adult Guardian
No One under 17 Admitted
Mature Audience Only
Continued on next page.
28 .English
Canadian English or Canadian French Ratings
You can select the Rating for Canadian English or Canadian French
broadcasting.
3
Use H I to Select Canadian English rating or Canadian French
rating, then press OK.
4
Use H I to Select the Desired Rating, then press OK Repeatedly
to Switch between Block and View.
●
PC settings
This function lets you adjust the PC screen position, clock and phase
during PC Input.
Use J K to adjust Clock setting to stabilize the PC screen and Phase
setting to improve the clarity of the PC screen.
1
Use H I to select PC settings, then press OK.
G indicates that the Rating is Locked (Block).
E indicates that the Rating is Not Locked (View).
Canadian
Canadian
Description
English rating French rating
All
Locked All Ratings
E
Exempt Program
C
–
For All Children
C8+
–
For All Children 8 and Older
G
General Audience
8ans+
–
Unsuitable for Ages under 8
PG
–
Parental Guidance Suggested
13ans+
–
Unsuitable for Ages under 13
14+
–
Unsuitable for Ages under 14
16ans+
–
Unsuitable for Ages under 16
18+
18ans+
Adult Audience Only
Picture
Sound
Setup
Features
Language
●
2
0
0
0
0
The horizontal/vertical position, clock and phase of the PC screen
are Automatically adjusted.
Auto adjustment Select if you want to adjust Automatically.
●
J Cursor
Horizontal
position
The V-Chip can Block Non Rated Programs as per “CEA-608-E sec. L.3”. If the Option to
Block NR, None or E Programs are used in US movie ratings lock, US TV ratings lock,
Canadian English rating or Canadian French rating accordingly “unusual results may occur
and the Unit may not Receive Emergency Bulletins or other Types of Programming”: /
Emergency Bulletins (Such as EAS messages, Weather Warnings and Others) / Locally
originated Programming / News / Political / Public Service Announcements / Religious /
Sports / Weather.
Change PIN
Cursor K
to move PC screen left
to move PC screen
right
Vertical position
to move PC screen
down
to move PC screen up
Clock
to decrease setting
value
to increase setting
value
Phase
Note(s)
Although the default PIN code (0000) is supplied with the Unit, you can
set your own PIN code.
3
4
Horizontal position
Vertical position
Clock
Phase
Use H I to select the item you want to adjust, then press OK.
Note(s)
●
Auto adjustment
Use H I to select Change PIN, then press OK.
●
You may not obtain an appropriate screen with Auto adjustment for some signals. In this
case, please adjust the settings manually.
●
Properly adjust the Clock setting and then adjust the Phase setting.
Press the NUMBER keys to enter the New 4-digit PIN code.
●
Enter PIN code again in Confirm PIN. entry field.
Picture
Sound
Setup
Features
Language
USB
Enter PIN.
Confirm PIN.
PIN Code
Back
Note(s)
●
Make sure to enter a PIN code and the confirm PIN code must be exactly the same.
If they are different, the space is cleared to reenter the New PIN code.
●
When a Power failure occurs the PIN code will be erased and Unit returns to the default
PIN code (0000).
●
If you forget the PIN code, unplug the AC Power Cord then wait for 10 seconds to plug
the AC Power Cord in again.
The Unit will restore the PIN code to 0000 (factory default). Then repeat the Change PIN
procedure to Setup a New PIN code.
Continued on next page.
29 .English
fun-Link (HDMI CEC)
Setting your Location to Home
This function allows you to operate the linked functions between our
brand Devices with a fun-Link feature and this Unit connecting through
an HDMI cable. You must connect this Unit to our brand fun-Link devices
and be sure it's fun-Link (HDMI CEC) setting is also set to On.
You can set the Location of your TV to Home or Retail. Choosing Home
gives you full flexibility to change predefined settings for Picture and
Sound.
1
1
Use H I to select fun-Link (HDMI CEC), then press OK.
Picture
Sound
Setup
Features
Language
USB
On
On
On
fun-Link control
Auto device off
Auto TV on
Picture
Sound
Setup
Features
Language
USB
Device list
2
Use H I J K to select the item you want to adjust, then press
OK.
Set the fun-Link control On or Off. The following additional settings will
be grayed out when you set them to Off.
Off
Disables All fun-Link.
Selects if you have connected an
fun-Link control
On
External Device that is compatible
with the fun-Link function.
You can set your connected fun-Link device to Turn Off by interlocking
from this Unit’s Power.
Your connected fun-Link device
Off
stays On even if the Unit goes into
Standby mode.
Auto device off
Your connected fun-Link device
On
Turns Off Automatically when the
Unit goes into Standby mode.
This Unit will Turn On when the Power On Signal is sent from your
connected fun-Link device.
This Unit stays in Standby mode
Off
even if you Turn On your
connected fun-Link device.
Auto TV on
This Unit Turns On Automatically
On
when you Turn On your
connected fun-Link device.
Device list
This function lets you see the product model number or name of
Connected Devices.
Picture
Sound
Setup
Features
Language
Use H I to Select Location, then press OK.
2
DVD recorder
HDMI2
Blu-ray disc player
Input Change
Refresh
Home
--
Use H I to select Home or Retail, then press OK.
Retail
The Unit will be set up with predefined settings
for retail displays. In this setting, the Power
Consumption may possibly exceed the limit
requirement of the ENERGY STARN
qualification.
Home
This setting is ENERGY STARN qualified.
The Unit is set to maximize the energy efficiency
for Home setting and it can be adjusted through
a choice of Picture and Sound quality selections
according to your preference.
Note(s)
●
You must set Home in the Menu. Otherwise, personalized Picture and Sound Settings will
Not Be Memorized after the Unit goes into Standby Mode.
E-sticker
When you set Location to Retail store, E-sticker (Electronic Sticker) is
displayed. E-sticker can be Turned Off using procedure below.
1
2
Use H I to select E-sticker, then press OK.
Use H I to select Off, then press OK.
Off
You can Turn Off E-sticker.
Top
E-sticker is displayed on top of the TV screen.
Bottom
HDMI1
Caption settings
Child lock
PC settings
fun-Link (HDMI CEC)
Location
E-sticker
Software upgrade
E-sticker is displayed on bottom of the TV screen.
Note(s)
●
If you set Location to Home, E-sticker will not be displayed.
Back
Continued on next page.
30 .English
Language
1
Press TV MENU and use H I to select Language, then press OK.
Picture
Sound
Setup
Features
Language
USB
2
Select your menu language.
English
Seleccione el idioma para el menú.
Español
Sélectionnez la langue du menu.
Français
Use H I to select English, Español or Français, then press OK.
Note(s)
●
If you need the English menu instead of the Spanish or French menu’s, press TV MENU.
Use H I to select Idioma or Langue, then press OK.
Use H I to select English then press OK.
Press TV MENU to Exit the Main menu.
6 Upgrade your TV Software
31 .English
Downloading the Software
Find information and Software related to your TV and Download the
Latest Software Upgrade file to your PC.
MAGNAVOX continuously tries to improve its products and we strongly
recommend that you Upgrade the TV Software when Upgrades are
available.
New Software can be Downloaded from our website at
www.magnavox.com/support/download
using the model number of your TV to find information.
Checking your Current Software version
1 Press TV MENU and use H I to select Features, then press OK.
2 Use H I to select Software upgrade, then press OK.
1
2
3
4
On your PC, open a web browser and go to
www.magnavox.com/support/download
Enter the model number in the “Type the Model Number...” field.
Click the desired Software to be Downloaded.
● Decompress the ZIP-file.
Copy the Upgrade file to the Empty root directory on the clean
formatted USB Memory Stick.
Starting the Software Upgrade
Warning
Picture
Sound
Setup
Features
Language
USB
3
Current software info
Upgrade
●
When the Software Upgrade is running, don’t press any keys.
●
Do Not remove the USB Memory Stick during the Software Upgrade.
●
If an Error occurs during the Upgrade, retry the procedure or for further assistance, please
contact the Call Center.
1
Connect your USB Memory Stick with the upgrade file to the USB
Service Port on the side of your TV.
Use H I to select Current software info, then press OK.
●
The version and a description of the Current Software is displayed.
Picture
Sound
Setup
Features
Language
USB
Back
Release Version:
XXXXXXX_XX_XX_XXXX_XX
Upgrading the Software
You can Upgrade the Software by using a USB Memory Stick.
Preparing for the Software Upgrade
You require the following equipment :
2
3
4
5
Press TV MENU and use H I to select Features, then press OK.
Use H I to select Software upgrade, then press OK.
Use H I to select Upgrade, then press OK.
Read the On-screen instructions and confirm that you want to
continue with the Installation.
Picture
Sound
Setup
Features
Language
USB
Start now
Would you like to upgrade the
software?
A PC with web browsing capability.
●
An archive utility that supports the ZIP-format (e.g. WinZip for
Windows or Stuffit for Mac OS).
●
A Blank empty clean formatted USB Memory Stick.
●
Note(s)
●
Only FAT / DOS-formatted portable memory is supported.
●
Use only Software Upgrades that can be found on the MAGNAVOX website.
6
When the Software Upgrade is completed, press B to set the Unit
into Standby mode, then remove the USB Memory Stick and then
press B again to Turn the Unit back On.
●
The TV starts up with the New Software.
For further assistance, please contact the Call Center.
32 .English
7 DVD
DVD Audio Setting
Choose the appropriate Audio Settings for your equipment. It only affects
the Audio during the Playback on a DVD.
DVD SETTING
1
Settings are only Effective when the Unit is in DVD mode and any Discs
should not be Playing back.
1
2
In STOP mode, press DVD SETUP and use J K to select
SOUND.
Use H I to select the desired item, then press OK.
In STOP mode, press DVD SETUP and use J K to select a desired
setting and an item, then press OK to determine the setting.
SOUND
DRC
DOWN SAMPLING
DOLBY DIGITAL
LANGUAGE
OK
SETUP MENU
AUDIO
SUBTITLE
DISC MENU
ENGLISH
ORIGINAL
OFF
ENGLISH
OK
3
2
When the setting is completed, press DVD SETUP to EXIT.
ON
ON
MULTICHANNEL
Adjust the following items.
DRC (dynamic range control)
This function is available only on the Discs which are recorded in the
Dolby Digital format.
DVD Language Setting
ON
You can change the desired Language when Playing back the Disc.
Compress the range between soft and loud
sounds.
OFF
No effects (original sound).
1
2
3
In STOP mode, press DVD SETUP and use J K to select
LANGUAGE.
Use H I to select the item you want to adjust, then press OK.
Adjust the following items.
SETUP MENU
DOWN SAMPLING
This function is available only on digital outputting of a Disc recorded in
96 kHz.
ON
When outputting in 48 kHz.
OFF
When outputting the original 96 kHz sound.
Select the desired On-screen Language.
DOLBY DIGITAL
AUDIO *1, *2
Set to MULTICHANNEL when this Unit is connected to a Dolby Digital
decoder.
MULTICHANNEL Outputs Dolby Digital signals.
Select the desired Audio Language.
SUBTITLE *1, *2
PCM
Converts the Dolby Digital into PCM. (2 channel)
Select the desired Subtitle Language.
DISC MENU *1
Select the desired Language in DVD Menu.
*1
Language options are Not available with some Discs.
If OTHER is selected in the AUDIO, SUBTITLE or DISC MENU
menu, input a 4-digit number to enter the Code for the desired
language.
Language Code List: L p. 34
Only the Languages supported by the Disc can be selected.
*2
Language setting for Audio and Subtitle are Not available with some
Discs.
- Use MODE to select Subtitles available on the DVD.
- Use SAP / AUDIO to select Audio available on the DVD.
If the DVD’s default settings for Audio and Subtitle are the same
Language, the Subtitles may not show unless you turn them On.
Continued on next page.
33 .English
Parental Setting
Others
Parental setting prevents your children from viewing inappropriate
material. (password protected.) Playback will stop if the ratings exceed
the levels you set.
You can change the Others functions.
1
2
In STOP mode, press DVD SETUP and use J K to select
PARENTAL.
1
2
In STOP mode, press DVD SETUP and use J K to select
OTHERS.
Use H I to select the desired item, then press OK.
Use the NUMBER keys to enter your personal 4-digit password,
then press OK.
OTHERS
ANGLE ICON
STILL MODE
AUTO POWER OFF
PARENTAL
PASSWORD
Please enter a 4-digit password.
ON
AUTO
ON
OK
OK
3
Adjust the following items.
ANGLE ICON
●
3
4
If you have set the password already, use the NUMBER keys to
enter the current 4-digit password.
● You cannot use the default password (4737) to Play back a DVD.
Use H I to select the PARENTAL LEVEL, then press OK.
STILL MODE
Use H I to select the desired item, then press OK.
If you select AUTO, it automatically selects the Best Resolution setting
(FIELD or FRAME) based on the Data Characteristics in the Pictures.
PARENTAL LEVEL
ALL
8 [ADULT]
1 [KID SAFE]
All Ratings (Adult / General / Children) can be
Played back.
Only DVD intended for children can be Played
back.
To change the password
6
Set the Picture quality in the Still mode.
All Parental Locks are cancelled.
7 [NC-17] to 2 [G] Only DVD intended for general use and children
can be Played back.
5
Set to ON to show the Angle Icon when Multiple Camera Angles are
available during DVD Playback.
At step 3, use H I to select PASSWORD CHANGE then press
OK.
Use the NUMBER keys to enter the new 4-digit password.
Note(s)
●
DVD-video may not respond to Parental Lock settings. Make sure this function works with
your DVD-video.
●
Record the Password in case you forget it.
●
If you forget the Password, press 4, 7, 3, 7, then enter your New Password. Password will
be cleared and Parental Levels will be set to ALL. Go to step 3 to reset PARENTAL
LEVEL.
●
A Power failure will Not Erase your Password.
FIELD
The picture in the Still mode will be stabilized.
FRAME
The picture in the Still mode will be highly
defined.
AUTO POWER OFF
Set to ON. If there is no operation for 15 minutes, the Unit goes into
Standby Mode.
Reset to the Default Setting
You can Reset All the Settings except for the Parental Setting and Onscreen Menu Language.
1
2
In STOP mode, press DVD SETUP and use J K to select
INITIALIZE.
Use H I to select YES, then press OK.
INITIALIZE
Initialize?
NO
YES
OK
Note(s)
●
When you want to Cancel the Initialization, select NO, then press OK.
Continued on next page.
34 .English
Language Code List
Language
Code
A-B
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
F-H
Faroese
Fiji
Finnish [FIN]
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
L-N
Laothian
Latin
Latvian;Lettish
Lingala
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
Language
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian [NOR]
O-R
Occitan
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Note(s)
●
If you choose a language that has a 3-letter abbreviation, the code will be displayed every
time you change the Audio or Subtitle Language setting above. If you choose any other
language, [---] will be displayed instead. (3-letter abbreviation is written in bracket.)
35 .English
8 OPERATING DVD
Unplayable Media
NEVER play back the following Discs. Otherwise, a malfunction
may result!
Playable Media
Media Type
Logo
Recorded Signal
Media Size
DVD-VIDEO
DVD-RW
digital video
(MPEG2)
DVD-R
5 inches (12 cm)
●
3 inch (8 cm) disc
●
DVD-RAM
●
DVD-audio
●
CD-i
●
Photo CD
●
Video CD
●
DVD with Region Codes other than 1 or ALL
●
DTS-CD
●
DVD-ROM for personal computers
●
CD-ROM for personal computers
●
The Discs with labels, scratches, stains, blemishes, etc.
●
HD DVD
●
Blu-ray Disc
●
DVD or CD contains MP3 / JPEG files
●
KODAK Picture CD
On the following Disc, the sound recorded on the disc's high
density layer WILL NOT be played back and displays a message.
CD-DA
Super Audio CD
●
Any other Discs without compatibility indications
CD-RW
digital audio
CD-R
Region Codes
This Unit has been designed to Play back DVD’s with Region 1.
DVD’s must be labeled for ALL Regions or for Region 1 in order
to Play back in this Unit. You cannot Play back DVD’s that are
labeled for other regions. Look for the symbols on your DVD. If
these region symbols are not on your DVD, you cannot Play back
the DVD in this Unit. The number inside the globe refers to
region of the world. A DVD labeled for a specific Region can only be
Played back on the Unit with the same Region Code.
Note(s)
●
Unfinalized Discs cannot be Played back.
●
For DVD-RW/-R, Discs recorded in the VR (Video Recording) format cannot be Played
back. Only finalized Video format Disc's can be Played back.
●
Some Discs cannot be Played back because of incompatible recording conditions,
characteristics of the recorder or special properties of Discs.
●
Only the Sound recorded on the normal CD disc's layer can be played back. The Sound
recorded on the Super Audio CD disc's high density layer cannot be played back and
displays a message.
●
Do Not use a single CD adaptor which makes 3 inch (8 cm) to 5 inch (12 cm) Disc.
●
You can Play back Discs with the marks listed in Playable Media. If you use nonstandardized Discs, this Unit may not play them back or the Sound and Video quality will
be compromised.
●
If the recorded portion of the Disc is too small (less than 2.17 inches (55 mm) across), it
may not Play back properly.
Color Systems
DVD is recorded for different color systems throughout the World. The
most common color system is NTSC (which is used primarily in the
United States and Canada).
This Unit uses NTSC, so a DVD you Play back must be recorded in the
NTSC system. You cannot Play back a DVD recorded in PAL color
systems.
Continued on next page.
36 .English
These Operations are accessible by Remote Control.
Some may also be accessible by the Main Unit's Control Panel.
Resume Playback
Press C during Playback. Resume Message will appear on the TV screen.
Press K (PLAY). Playback will resume from the Point at which Playback
was Stopped.
Playback
Before you begin:
Note(s)
Turn On the amplifier and any other equipment which is connected to
this Unit. Make sure the external audio receiver (not included) are set to
the correct channel.
1
2
●
To Cancel Resume, press C one more time in the Stop mode. On some Discs, C will not
work while the Resume Message appears. Please wait until the Message disappears.
●
The Resume information will be kept even when the Unit goes into Standby Mode.
However, Ejecting the Disc will Cancel the Resume feature. Playback will then start at the
beginning the next time you insert the Disc.
Press B to turn On the Unit.
Insert a Disc with label facing toward the TV screen.
Paused and Step-by-Step Playback
Label (toward the TV screen)
CAUTION
• Do not put coins or
foreign objects into the
disc loading slot.
In case the DVD was recorded on both sides, make sure the Label
side you want to play back is facing toward the TV screen.
The Unit switches to the DVD mode when the Unit was in TV mode
and detects the type of Disc.
●
3
Press K (PLAY) if the Unit does not go to the DVD mode.
The Unit starts Playback.
●
4
5
If Playback does not start automatically, press K (PLAY) again.
Press C to Stop Playback temporarily.
6
If Playback remains stopped for 15 minutes, the Unit will go into
Standby mode automatically when AUTO POWER OFF feature
is set to ON.
Press A to eject the Disc.
Press F during Playback.
Playback will be Paused and Sound will be Muted.
●
DVD
Each time you press F in the Pause mode, the Disc goes Forward one
frame at a time.
To continue Playback, press K (PLAY).
Note(s)
●
Set STILL MODE to FIELD in the OTHERS menu if pictures in the Pause mode are
blurred. L p. 33
●
●
Fast Forward / Fast Reverse
Press D or E repeatedly during Playback to select the desired Forward
or Reverse speed.
To continue Playback, press K (PLAY).
Note(s)
Note(s)
●
W may appear at the top-right on the TV screen when the operation is prohibited by the
Disc or this Unit.
●
Some DVD may start Playback from Title 2 or 3 due to specific programs.
●
During the Playback of a 2-layered Disc, pictures may stop for a moment. This happens
while the 1st layer is being switched to the 2nd layer. This is not a malfunction.
●
When you cannot remove the Disc, you may try either of the following operations.
–
Press and Hold A key on the Unit for more than 5 seconds.
–
Unplug the AC power cord for 10 seconds and plug it in again, then press A key on
the Unit.
●
Set STILL MODE to FIELD in the OTHERS menu if pictures in the Fast Playback mode
are blurred. L p. 33
●
Fast Forward / Fast Reverse speed varies with Disc. Approximate speed is 1(2x), 2(8x),
3(20x), 4(50x) and 5(100x) on DVD and 1(2x), 2(8x) and 3(30x) on Audio CD.
●
For DVD, sound will be Muted during this function.
●
For Audio CD, Sound will be intermittent during the search.
Slow Forward / Slow Reverse
It will take about 10 seconds to Eject the Disc while the Unit may not respond to any key
commands.
Disc Menu
DVD
Press D or E repeatedly during the Pause mode to select the desired
Forward or Reverse speed.
To continue Playback, press K (PLAY).
DVD
Some Discs contain Disc Menus which describe the contents of the Disc
or allow you to customize Disc Playback or Title Menu which lists the
Titles available on the DVD.
To display the DVD Menu, press DISC MENU and use H I J K to
select an item, then press OK (or K (PLAY)).
Note(s)
●
Set STILL MODE to FIELD in the OTHERS menu if pictures in the Slow Playback mode
are blurred. L p. 33
●
Slow Forward / Slow Reverse speed varies with Disc. Approximate speed is 1(1/16x),
2(1/8x) and 3(1/2x).
●
The Sound will be Muted during this function.
To display the Top Menu, press TITLE and use H I J K to select an
item, then press OK (or K (PLAY)).
Note(s)
●
Menu operations may vary depending on the Disc. Refer to the manual accompanying the
Disc for more details.
Continued on next page.
37 .English
Time Search
Zoom
You can select the desired time where the Disc is Played back from.
DVD
The Zoom function allows you to enlarge the Video image and to Pan
through the Enlarged image.
1
2
3
4
During Playback, press MODE repeatedly until
appears.
Press OK repeatedly to change the Zoom factor, 2x or 4x.
Once a desired Zoom factor is set, use H I J K to slide the
Zoomed Picture across the TV screen.
To EXIT Zoom, repeat steps 1 and 2 above and press OK repeatedly
until OFF appears (2x L 4x L OFF).
Note(s)
●
The Black box with an inner Gray box that is displayed during Zoomed Playback, is a
Position Guide which indicates the position of the Zoomed Image within the overall Picture
image.
The Position Guide stays on the TV Screen until you press OK.
Press OK one more time to recall the Position Guide after it disappeared.
●
Zoom function does not work while the Disc Menu is displayed.
●
4x Zoom is not available on some Discs.
●
Zoom function is also available during Pause mode.
1
2
3
3
●
●
Playback will start automatically from the Time you selected.
When there is no need to enter a number, 0 appears automatically. For example, 0: 0_:
_ _ appears in the Time Search Menu if the total time of the Title or Track is less than 10
minutes.
●
Press CLEAR to Erase the incorrect input at step 3.
●
Time Search can only be performed during Playback or when the Unit has kept the Resume
information. It cannot be performed in the Stop mode.
Direct Search
Press the NUMBER key(s) to select your desired Chapter, Title or Track.
●
To select a Single-digit Chapter, Title or Track number, press the number directly.
●
To select Double-digit Chapter, Title or Track number:
/
appears.
If you want to perform the Title Search, use H I repeatedly until
appears.
Press the NUMBER key(s) to select your desired Chapter, Title or
Track within 60 seconds.
If the Disc contains more than 9 and less than 100 Chapters, Titles or Tracks, press +10
first, then enter the Double-digit Chapter, Title or Track number. (e.g., for Track 26,
press +10, 2 and 6)
Repeat Playback
Repeat function is available only during Playback.
1
2
During Playback, press MODE repeatedly until
Press H I to change the Repeat mode.
OFF
CHAPTER
TITLE
Repeat Off
Current Chapter Repeat
Current Title Repeat
CD
OFF
TRACK
Chapter, Title or Track Search can only be performed during Playback or when the Unit
has kept the Resume information. It cannot be performed in the Stop mode.
The total number of Chapters / Titles / Tracks in your Disc; with less than 10 (Single digit)
Chapters / Titles / Tracks, press the Chapter / Title / Track number directly. To play a
Double-digit Chapter / Title / Track, press the Chapter / Title / Track numbers. For Doubledigit numbers, you need to input both digits.
appears.
DVD
To Play back a Single-digit Chapter, Title or Track press a single key
and when there are more than 10 Chapters, Titles or Tracks press
two keys, press OK after entering the Chapter, Title or Track
number(s).
Playback will start automatically from the Chapter, Title or Track you
selected.
Note(s)
●
appears.
Note(s)
You can select Chapters, Titles or Tracks on the Disc.
2
appears.
Press the NUMBER key(s) within 60 seconds to select your desired
search time.
–
During Playback, press MODE repeatedly until
/
Note(s)
●
Chapter / Title / Track Search
●
Use H I repeatedly until
4
Search Functions
1
During Playback, press MODE repeatedly until
ALL
3
Repeat Off
Current Track Repeat
Entire Title Repeat
Press BACK to EXIT.
Track search is Not available for Programmed or Random Playback.
Using H / G
1
During Playback, press H / G repeatedly until a desired Chapter,
Title or Track will be selected.
Current Chapter / Track
(CH) (TR)
CH/TR 1 CH/TR 2 CH/TR 3 CH/TR 4
H
2
G
Current Title
(TT)
or
TT 1 TT 2 TT 3 TT 4
H
G
Playback will start automatically from the Chapter, Title or Track you
selected.
Note(s)
●
H / G are Not available when Playback is Stopped.
Continued on next page.
38 .English
Programmed Playback
Repeat A-B Playback
You can Repeat Playback between A and B on a Disc.
1
2
3
During Playback, press MODE repeatedly until
A B
CD
appears.
Press OK at your desired Starting point (A).
Press OK at your desired Ending point (B).
Point B should be in the same Title or Track as point A.
●
You may determine the Order in which Tracks will play back.
1
In STOP mode, press MODE repeatedly until the PROGRAM Menu
appears.
2
Use H I to Select a desired Track, then press OK to Store it.
●
Within a few seconds, the selection A-B will begin to Play back
repeatedly.
To Cancel Repeat A-B Playback, press MODE repeatedly until A B
●
4
●
appears.
Press OK so OFF appears.
●
Additional Tracks may be on other screens. Use H I to go on to
the Next / Previous pages.
Repeat this Step until you have selected all the Tracks you wish to
play back in the program.
Up to 99 Tracks can be ordered.
If 8 or more Tracks were in a Program, use H / G to see All
the Tracks.
Press K (PLAY) to start Programmed Playback.
●
Note(s)
●
Repeat setting (except ALL) will be cleared when moving to another Title or Chapter,
Track.
●
During Programmed Playback, Repeat setting will be effective for the Tracks in the
program.
●
Repeat Playback or Repeat A-B Playback may Not be available with some Discs.
3
Note(s)
●
Press CLEAR to Erase the last Track in the program if you make an error.
To Erase all Programmed Tracks at once, select ALL CLEAR and press OK at step 2.
While a Program is being Played back, C works as follows:
Repeat A-B Playback does not function during another Repeat mode.
●
●
To Cancel Point A, press CLEAR at step 2 in Repeat A-B Playback.
●
●
Stopping Playback will Cancel Repeat A-B Playback.
●
Random Playback
–
Pressing C once: The Track will be in the Resume Standby mode. Next time you press
K (PLAY), the Playback will Resume from the Point where it is Stopped in the
Programmed Playback.
–
Pressing C twice: Resume mode will be Cancelled. Next time you press K (PLAY),
Playback will Restart from the First Track in the Original order. However, your
Programmed Playback can be Restarted when you follow the above steps. (Your
Programs are still Stored until either the Disc is Ejected or the Unit goes into Standby
mode.)
–
On some Discs, C will not work while the Resume message appears. Please wait until
the Message disappears.
CD
This function Shuffles the Playing order of Tracks instead of sequential
Playback.
1
2
In STOP mode, press MODE repeatedly until the RANDOM Menu
appears.
●
To Repeat the current track in the program, follow the steps 1 and 2 in Repeat
Playback and select TRACK. L p. 37
●
To Repeat the Entire Program, follow the steps 1 and 2 in Repeat Playback and select
ALL. L p. 37
Press K (PLAY) to start Random Playback.
Note(s)
●
●
To Repeat the current Track in the Random mode, follow the steps 1 and 2 in Repeat
Playback and select
TRACK. L p. 37
To Repeat the entire random selections, follow the steps 1 and 2 in Repeat Playback and
select
ALL. L p. 37
●
Ejecting the Disc or the Unit goes into Standby mode will Erase the program.
●
You cannot use the Number keys to select another Track during Programmed Playback.
Use H / G to select other Tracks in the program.
●
You cannot combine Random Playback with Programmed Playback.
●
You cannot alter a programmed order during Playback.
●
You can start Programmed Playback only while in PROGRAM menu.
Continued on next page.
39 .English
On-screen Display
Special Settings
You can check the information about the current Disc by pressing INFO
on the Remote Control.
Subtitle Language
Remaining Time of the Current Chapter
DVD
appears only when multi-angle is
available on the DVD
Current Playback Status
DVD
This Unit allows you to select a Subtitle Language (if available) during DVD
Playback.
1
2
During Playback, press MODE repeatedly until
appears.
Use H I repeatedly until your desired Language appears.
11/16 0:00:00 - 0:03:30
1.ENG / 6 (SUBTITLE)
1/3
Elapsed Time of the Current Chapter
Subtitles can be varied by the
displayed number
CH (Chapter):
Current Chapter Number / Total
Chapters
Current Subtitles Language
3
0:00:00 - 1:23:45
Each time you press H I, the Subtitle Language changes as follows.
Remaining Time of the Current Title
Elapsed Time of the Current Title
TT (Title):
Current Title Number / Total Titles
T
Layer Number, appears only when
playing a 2-layered disc
L0: Layer 0 is playing
L1: Layer 1 is playing
L1
Current Repeat Setting appears only
when the Repeat Setting is active
C: Chapter Repeat
T: Title Repeat
A B: A-B Repeat
4
No Subtitles
ENG
English Audio
SPA
Spanish Audio
FRE
French Audio
Press BACK to EXIT.
Note(s)
●
To Cancel the Subtitle, select OFF at step 2.
●
If your Language is not shown after pressing H I several times, the Disc may not have
that Language. However, some Discs allow you to change Subtitle Languages setting in
the Disc Menu. (Operation varies depending on the Disc, so refer to the manual
accompanying the Disc.)
When NOT AVAILABLE appears on the TV screen, it means No Subtitle is recorded on
the scene.
If you choose a language that has 3-letter-language code, the code will be displayed every
time you change the Subtitle Language setting. If you choose any other languages, --- will
be displayed instead. L p. 34
Ejecting the Disc will Cancel your Subtitle setting.
●
Bit Rate Indication for the amount of
Audio and Video data currently being
read
OFF
●
●
Audio Language
CD
Elapsed Time of the Current Track
Remaining Time of the Current Track
Current Playback Status
4/12 0:03:21 - 0:02:15
DVD
This Unit allows you to select an Audio Language (if multiple Languages
are available) during DVD Playback.
1
T
TR (Track):
Current Track Number / Total
4/12 0:13:45 - 0:45:40
T
During Playback, press SAP / AUDIO repeatedly until the desired
Language appears.
1.ENG Dolby D 3/2.1ch 48k/3
ALL:
Current Track Number / Total
Audio can be varied by the
displayed number
Current Repeat Setting appears only
when the Repeat Setting is active
T: Track Repeat
A: All Tracks Repeat
A B: A-B Repeat
Current Audio Language
2
Each time you press SAP / AUDIO, the Audio Language changes as
follows.
ENG
English Audio
Remaining Time of the entire disc
SPA
Spanish Audio
Elapsed Time of the entire disc
FRE
French Audio
Note(s)
●
●
Note(s)
●
When you are Playing back an Audio CD in Program or Random Mode,
(or
RANDOM) will be displayed instead of 2 .
PROGRAM
●
Some Discs will only allow you to change the Audio setting from the Disc Menu. Refer to
the manual accompanying the Discs for details.
If your Language is not shown after pressing SAP / AUDIO several times, the Disc may
not have that Language. However, some Discs allow you to change multiple Audio
Languages setting in the Disc Menu. (Operation varies depending on the Disc, so refer to
the manual accompanying the Disc.)
When NOT AVAILABLE appears on the TV screen, it means Audio Language is Not
available.
Continued on next page.
40 .English
Marker Setup
Camera Angles
DVD
Some DVD may contain scenes which have been shot simultaneously
from various Angles. You can change the Camera Angle if X appears on
the screen. If ANGLE ICON is set to OFF in OTHERS menu, X will not
appear. L p. 33
1
2
During Playback, press MODE repeatedly until
appears.
Use H I repeatedly until your desired Camera Angle appears.
1 / 8 (ANGLE)
Angles can be varied on
the displayed number
3
This feature allows you to assign a specific point on a Disc to be called
back later.
To set a Marker
1
2
3
4
2
Black Level Setting
DVD
Adjust the Black Level to make the dark areas of the TV picture brighter.
1
2
3
During Playback, press MODE repeatedly until
appears.
●
ON
Makes the Dark Areas brighter.
OFF
Shows the Original Picture as recorded.
●
Press BACK to EXIT.
Note(s)
●
The setting will be kept even if the Unit goes into Standby Mode.
Stereo Sound Mode
CD
This Unit allows you to select a Sound Mode during CD Playback.
1
2
During Playback, press SAP / AUDIO repeatedly until the desired
Sound Mode appears.
Each time you press SAP / AUDIO, the Sound Mode changes as
follows.
STEREO
Stereo Sound with Left and Right Channels.
L-ch
Left Channel Sound Only.
R-ch
Right Channel Sound Only.
Note(s)
●
Virtual Surround cannot be changed when the Sound Mode is set to either L-ch or Rch.
Virtual Surround
You can enjoy Virtual Surround on your 2 channel Stereo System.
1
2
During Playback, press MODE repeatedly until
Press H I to select the Sound Level.
1
Natural Effect.
2
Emphasized Effect.
OFF
3
appears.
No Effects (original sound).
Press BACK to EXIT.
Note(s)
●
●
●
The Setting will be kept even if the Unit is Turned Off.
For Audio CD, Virtual Surround will not be effective if the Sound Mode is set to something
other than STEREO. Stereo Sound Mode.
Stereo Sound Mode L p. 40
Turn down the level or select OFF if the Sound is distorted.
appears.
Use H I repeatedly until Marker Search Menu appears.
Repeat steps 1-2 in To set a Marker. Use J K to select the desired
Marker.
Press OK at the desired Marker to Restart Playback from the specific
point which you set.
Note(s)
●
●
Press H I to adjust the Black Level.
/
Use J K to select an available Marker within 60 seconds.
When the Playback reaches the point at which you want to set a
Marker, press OK.
● Marker is now set.
5 Press BACK to EXIT.
To return to the Marker later
1
Press BACK to EXIT.
During Playback, press MODE repeatedly until
●
Marker Search Menu will disappear in about 60 seconds when there is no Input.
You can Mark up to 10 points.
To Clear a Marker, select the Marker to be Cleared, and then press CLEAR.
Ejecting the Disc or turning off the Power will Erase all Markers.
Selecting
at step 3 in the section (To set a Marker) will also Erase all Markers.
41 .English
9 Useful tips
FAQ
Question
My Remote Control does
not work.
What should I do?
Answer
●
Check the Antenna or Cable Connection to the Main Unit.
●
Check the Batteries on the Remote Control.
●
Re-insert the Batteries with their Polarities (+/–) as indicated.
●
Check if there is an obstacle between the infrared sensor window and the Remote Control.
●
●
Aim the Remote Control directly at the infrared sensor window on the front of the Unit.
●
Reduce the distance to the Unit.
●
How come the Initial Setup
appears every time I Turn
On this Unit?
Connect the RF Coaxial Cable directly to this Unit and run the Initial Setup.
●
Make sure to complete the Initial Setup before the Unit goes into Standby mode.
Make sure Autoprogram has been completed. L p. 23
●
The selected channel may not be broadcasting.
●
●
When I enter a channel
number, why does it change
Automatically?
Why are captions not
displayed Entirely?
Or why are captions
delayed behind the dialog?
How can I set the clock?
My PIN code no longer
works, how can I change the
Child Lock setting?
My Disc cannot be played
back. Is there any way I can
play my Disc?
Autoprogram must be completed when you Set Up the Unit for the First time or Move it to a location where previously
unavailable channels are broadcast.
●
●
How come there is no
image from the Connected
External Devices?
When there is an infrared-equipped device such as PC near this Unit, it may interrupt the Remote Control signal on this
Unit. Move the infrared-equipped device away from this Unit, change the angle of the Device's infrared sensor or Turn
Off the infrared communication function.
●
●
Why can I not watch some
RF signal TV Programs?
Test the IR Signal Output use IR Signal Check. L p. 44
If okay, then possible Infrared Sensor trouble.
●
●
●
●
●
●
When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete the
Autoprogram. L p. 23
The selected channel cannot be viewed by the Child and Ratings Lock setting. L p. 26
The Unit requires some kind of Antenna Input. An indoor Antenna (Digital or VHF / UHF), an External Antenna (Digital
or VHF / UHF) or an RF Coaxial Cable from your wall Cable / Satellite Set-top Box needs to be plugged into the Unit.
Check if the correct Input mode is selected by pressing SOURCE or using CH + / –. Refer to Watching Channels from
an External Device. L p. 18
Check the Antenna, Cable or other Input Connection to the Unit.
Many Digital channels have alternate channel numbers. The Unit changes the numbers Automatically to the ones signifying
the Broadcasting Station's channel number. These basic numbers used for the previous Analog Broadcasts. (e.g., Input
Digital ch# 30 Automatically changes to Digital ch# 8.1)
Closed Captions that are delayed a few seconds behind the actual dialog are common for Live broadcasts. Most captioning
production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective
editing is used to insure that the Closed Captions remain up-to date with the current TV screen dialog.
There is No clock function on this Unit.
If a Power failure occurs for longer than 10 seconds the child lock setting is retained, but the PIN code is reset to the
default code 0000. Refer to Child and Ratings Lock. L p. 26
●
Clean the Disc.
●
Ensure the Disc is correctly inserted. Refer to Playback L p. 36.
●
Check if the Disc is defective by trying another Disc.
●
Cancel the Parental lock or change the control level.
●
Insert a correct Disc that plays back on this Unit.
●
Handle a Disc with special care so that it does not have fingerprints, scratches or dusts on its surface.
Continued on next page.
42 .English
Troubleshooting
If the Unit does not perform properly when operated as instructed in this Owner’s Manual,
check the following Troubleshooting Tips and All Connections Once before calling for Service.
Power
No Power
● Make sure the AC Power Cord is plugged in.
● Make sure that the AC outlet supplies the proper voltage, plug another
electrical appliance into the AC outlet to ensure that the AC outlet operates
normally.
● If a Power Failure occurs, Unplug the AC Power Cord for 1 minute to allow
the Unit to Reset Itself.
Remote
Control keys do not work.
● Do NOT press more than one key at the same time.
● Ensure that no keys on the Remote Control are depressed and move freely.
Universal Remote Control does not work properly.
● Refer to the user manual of the Universal Remote Control for the
MAGNAVOX code.
Picture
Power is On but No Screen Image.
● Check whether the Connection for the Antenna, Cable or Satellite Set-top
Box is Connected Correctly.
● Check whether All the Cables to the Unit are connected to the correct Output
Jack on your separate Device like Blu-ray Disc / DVD Recorder.
● Make sure that the selected Input mode is connected to the working Input
jack.
● Check if your computer is NOT in Sleep Mode when the Input Mode on this
Unit is in PC mode. Tap any Key on the Computer Keyboard to Wake it up.
No Color
● View other TV channels. The problem might be limited to the broadcasting
station.
●
Adjust Color in Picture settings. L p. 21
Picture Poor
●
Adjust Contrast and Brightness in Picture settings. L p. 21
● For the Best Picture Quality, watch “High Definition” wide screen Programs.
If the HD content is Not available, watch “Standard Definition” Programs
instead.
You see Pixelation on the Screen.
● When the capabilities of the Unit exceed the capabilities of the Digital
Broadcasting, the signal will be increased to match the capabilities of the
Display on the Unit. This may cause Pixelation, Noise or Trash.
Unusual picture appears and the TV does Not Operate.
● Press the power key.
Sound
No Sound or Distorted Audio Sound is heard when using the HDMI-DVI
connections.
● If the HDMI Cable is plugged into an HDMI-DVI adaptor Cable connect the
Adaptor Analog Audio L/R jacks into the Audio L/R IN jacks.
Refer to For PC Input signal L p. 19
Incorrect Audio Sound is heard when using the HDMI-DVI connections.
● Make sure that the Analog Audio signals from the HDMI-DVI Device are
connected to the Analog Audio (L/R) Input jacks.
Refer to For PC Input signal L p. 19
● When using Composite Analog Video, make sure that the Analog Audio
(L/R) connectors are mounted into the Audio (L/R) Input jacks.
Sound Intermittent or No Sound.
● Check if the Audio Cable is connected into the Unit correctly.
You Switch to a Different Input and the Volume Changes.
● This Unit will Memorize the Volume Level from the last time you adjusted it.
● If the Volume of the Sound from another Device is Higher or Lower, then the
Loudness will Change.
●
Make sure Auto volume leveling is set to On. L p. 22
Picture & Sound
No Picture or Sound
● Check if the Power is On.
● Check whether All the cables to the Unit are connected to the correct Output
jack of your device like Blu-ray / DVD Recorder.
● View other TV channels. The problem might be limited to the Broadcasting
Station or Weak Signal Strength, if DTV channel check signal strength.
Refer to Antenna confirmation L p. 24.
● Unplug the AC Power Cord and wait for about 1 minute, then Plug the AC
Power Cord and turn On the Unit again.
● Check whether the Connection of the Antenna or Cable / Satellite Set-top
Box is connected correctly.
● Make sure that the selected Input mode is connected to the working Input
jack.
● Check if your computer is NOT in sleep mode when the Input mode of this
Unit is in PC mode. Tap any key on the keyboard to wake up your computer.
●
Make sure that the sound is not muted. Press D so that the volume bar and
current volume level will appear on the TV screen.
●
Make sure that the volume is NOT set to 0 or C. If so, use VOL + / – to
adjust to the desired volume.
Adjusted Picture or Sound settings are not the same (memorized) every time
the Unit is turned On.
●
You must set Home in Location. L p. 29 (Otherwise, the settings you
adjusted will not be memorized after the Unit goes into Standby Mode.)
You see a Distorted Picture or Hear an Unusual Sound. (Analog TV NTSC signal)
● You may be getting interference from electrical appliances, automobiles,
motorcycles or fluorescent lights.
● Try moving the Unit to another Location to see if this is the Cause of the
Problem.
Ghosts, lines or streaks in picture. (Analog TV- NTSC signal)
● Electrical interference from nearby appliances may affect picture quality.
● View other TV channels. The problem might be limited to the Broadcasting
Station or Weak Signal Strength, if DTV channel check signal strength.
Refer to Antenna confirmation L p. 24.
Picture Poor, Sound Intermittent or No Sound
● View other TV channels. The problem might be limited to the Broadcasting
Station or Weak Signal Strength, if DTV channel check signal strength.
Refer to Antenna confirmation L p. 24.
Screen
You Switch to a different Input and the Screen Size changes.
● This Unit will Memorize the Viewing Mode from the last time you used those
Particular Input Modes.
The Display image does not cover the Entire Screen.
● If you are using the Unit as a PC Monitor, make sure that Horizontal
position and Vertical position in PC settings are set correctly.
● If you are watching TV or using the Composite Video or HDMI with 480i Input,
press PICTURE SIZE A Repeatedly to Switch to various Screen Modes.
Different color marks on the TV screen
● View other TV channels. The problem might be limited to the broadcasting
station, missing data or pixelation due to weak signal strength.
Closed Captions
Closed Captions are displayed as a white box. No Closed Captions are
displayed in the Closed Captions-Supported Program.
● Interference from buildings or weather conditions may cause captioning to be
incomplete if watching Analog TV signals.
● Broadcasting Station may shorten the program to insert advertisements.
● The Closed Captions Decoder cannot read the information of a shortened
program.
Black Box is displayed on the TV Screen.
● The Text mode is selected. For Closed Captions, select CC-1, CC-2, CC-3
or CC-4.
Continued on next page.
43 .English
DVD
Completely distorted picture or black/white picture with DVD.
● Make sure the Disc is compatible with the Unit.
Picture freezes momentarily during Playback.
● Check the Disc for fingerprints / scratches and clean with a soft cloth wiping
from center to edge.
Disc cannot be played.
● Clean the Disc.
● Ensure the Disc is correctly inserted with Printed side toward the TV screen.
● Check if the Disc is defective by trying another Disc.
● Cancel the Parental lock or change the control level.
Refer to Parental Setting L p. 33
● Insert a correct Disc that plays on this Unit.
● Handle a Disc with special care so that it does not have fingerprints, scratches
or dust on its surface.
Keys Do Not work or the Unit stops responding.
● To completely reset the Unit, unplug the AC power cord from the power
outlet for 1 minute.
The Unit does not respond to some operating commands during Playback.
● Operations may not be permitted by the Disc. Refer to the instructions for
the Disc.
Angle does not switch.
● The Angle cannot be switched for DVD’s which do not contain Multiple
Angles. In some cases Multiple Angles are only recorded for specific scenes.
Playback does not start when the Title is selected.
●
Check the PARENTAL setting. Refer to L p. 33
The password for rating level has been forgotten.
● Enter the default code “4737”, then your forgotten password will be cleared.
Refer to Parental Setting L p. 33
Note(s)
●
●
●
The LCD screen is manufactured to provide many years of useful life.
Occasionally a few non active pixels may appear as a fixed point of blue, green
or red.
This is Not to be considered a Defect in the LCD screen.
Some Functions are Not available in Specific Modes, but this is Not a
Malfunction. Read the Description in this Owner’s Manual for more Details
on Correct Operations of this Unit.
Some functions are prohibited on some Discs.
Continued on next page.
44 .English
10 Information
Glossary
Analog TV (NTSC)
Acronym that stands for National Television Systems Committee and the
name of Analog broadcasting standards.
Off the air Analog TV signals are no longer being sent by major
broadcasting stations in the USA.
Maintenance
Cabinet Cleaning
●
●
Aspect ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3
(in other words, the TV screen is almost square); widescreen models are
16:9 (the TV screen is almost twice as wide as its height).
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand
devices with CEC feature and this Unit. We Do Not guarantee 100%
interoperability with other brands of CEC compliant devices.
Wipe the front panel and other exterior surfaces of the Unit with a soft
cloth.
Never use a solvent or alcohol. Do Not spray insecticide liquid near the
Unit. Such chemicals may cause damage and discoloration to the
exposed surfaces.
Panel Cleaning
Wipe the panel of the Unit with a soft cloth. Before cleaning the panel,
disconnect the AC Power Cord.
Disc Handling
Handle the Discs so that fingerprints and dust do not adhere to the
surfaces of the Discs.
Dolby Digital
The system developed by Dolby Laboratories to compress Digital sound.
It offers Stereo Sound (2ch) or multi-channel Audio.
DTV (ATSC)
Abbreviation that stands for Advanced Television Systems Committee
and the name of the Digital broadcasting standards.
E-sticker
E-sticker is showing set features, technical information, etc on this TV set
that is displayed on the TV screen mainly used by TV retailers. Previously
the information was on a printed sticker that was put on the display.
●
Always store the Disc in its protective case when it is not used.
●
To clean-off, use a soft cloth.
●
Do not use a hard cloth since this will mar the Disc.
●
Wipe the Disc in a straight line form center to edge.
●
Never wipe with a circular motion.
●
Do not use detergent or abrasive cleaning agents.
HDMI (High-Definition Multimedia Interface)
Servicing
Interface that supports All uncompressed, Digital Audio / Video formats
including Set-top Box, Blu-ray / DVD Recorder or Digital television, over
a single cable.
Should your Unit become inoperative, Do Not try to correct the problem
yourself. There are no user serviceable parts inside. Call our toll free
customer support line found on the cover of this Owner’s Manual to
locate an Authorized Service Center.
HDTV (High Definition TV)
Ultimate Digital format that produces high resolution and high picture
quality.
PIN code
A stored 4-digit number that allows access to Parental control features.
Region Code
Regions associate Discs and players with particular areas of the World.
This Unit will only play back Discs that have compatible Region Codes.
You can find the Region Code of your Unit by looking on the rear panel.
Some Discs are compatible with more than one Region (or All Regions).
SAP (Secondary Audio Program)
Second-Audio channel delivered separately from the Main-Audio channel.
This Audio channel is used as an alternate in bilingual broadcasting.
SDTV (Standard Definition TV)
Standard Digital format that is similar to the Analog TV picture quality.
If the Laser Optical Pickup Unit is Dirty
If the Unit still does not perform properly when it is operated, please refer
to the relevant sections and to Troubleshooting in this Owner’s Manual.
The laser optical pickup unit lens may be dirty. Consult your dealer or an
Authorized Service Center for inspection and cleaning of the laser optical
pickup unit lens.
IR Signal Check
If the Remote Control is not working properly, you can use a Digital or
Cell Phone Camera to see if it is sending out an infrared signal.
e.g.) With a Digital Camera:
Point the Digital Camera towards the
Remote Control infrared diode at the front
of the Remote Control. Press any key on the
Remote Control and look at the Camera
Display. If an infrared pulsating light appears
on the Display, the Remote Control is
sending out an IR signal.
Note: Some Cameras have an IR Filter and will not Display the IR signal.
45 .English
11 Specifications
Model #
32MD304V
Picture
Type
WXGA
(1366 x 768 pixels 60Hz)
Aspect Ratio
16:9
Viewing Angles
178° (V) by 178° (H)
Built-in Digital / Analog Tuner
Sound
ATSC (Digital) / NTSC (Analog)
Mono / Stereo
Mono, Stereo, DTS TruSurround™
Power Output (RMS watts)
8Wx2
Equalizer
Ease of Use
5 Band
Picture Format
SD (4:3 Source)
: Normal / 16:9 / Movie expand / Zoom / Wide
HD (16:9 Source)
: Normal / 4:3 / Movie expand / Zoom / Wide
HDMI AV (4:3 Source)
: Normal / 16:9 / Movie expand / Zoom / Wide / Full
HDMI AV (16:9 Source)
: Normal / 4:3 / Movie expand / Zoom / Wide / Full
PC Source
: Normal / Full / Unscaled
(Refer to HDMI AV (16:9 Source) above if PC has HDMI Output.)
Terrestrial DTV (ATSC)
: VHF: 2~13
UHF: 14~69 (Each Channel has e.g. 2.1~2.9, 3.1~3.9, etc)
Terrestrial Analog (NTSC)
: VHF: 2~13
UHF: 14~69
Channel
Channel Coverage
CATV (Analog NTSC)
2~13, A~W
W+1~W+94 (Analog W+1~W+84), A-5~A-1, 5A
Tuning System
Channel Frequency Synthesized Tuning System
Channel Access
Direct Access Number Keyboard,
Programmable Scan, Channel +(up) / −(down) and PREV. CH (Previous Channel)
Disc
Playback compatibility
DVD-Video, DVD-RW/-R, Audio CD, CD-RW/-R
DVD (linear sound)
: 20 Hz to 20 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
CD
: 20 Hz to 20 kHz
Frequency response
Signal-to-noise ratio (S/N ratio)
Total distortion factor
CD
: 90 dB (JEITA)
DVD
: 1 KHz 0.007% (JEITA)
CD
: 1 KHz 0.007% (JEITA)
Connectivity
Composite Video Input
1
HDMI Input
2
Supporting video signals : 480i/p, 720p, 1080i @60Hz, 1080p @24/30/60Hz
PC-Input signal up to WXGA (1360 x 768)
Analog Audio L/R Input
1
PC Input
via VGA, HDMI and HDMI-DVI + Analog Audio L/R
Digital Audio Output
1
Supporting Dolby Digital
Headphone Output
1
1/8 inch (3.5mm)
Power
●
Power Requirements
Temperature
120V~ +/− 10%, 60Hz +/− 0.5%
Operating Temperature
41 °F (5 °C) to 104 °F (40 °C)
Specifications are Subject to Change without Prior Notice.
46 .English
12 Warranty
LIMITED WARRANTY
ONE (1) YEAR PARTS AND LABOR
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or the
person receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1) repair
the product at no charge, using new or refurbished replacement
parts, or (2) exchange the product with a new or refurbished
product at company’s option.
Replacement products or parts provided under this warranty are
covered against defects in materials and workmanship from the
date of the replacement or repair for ninety (90) days or for the
remaining portion of the original product’s warranty, whichever
provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the
replaced item becomes company property. When a refund is
given, your product becomes company property.
Note: Any product sold and identified as refurbished or renewed
carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements can
result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND
LIMITATIONS:
This Limited Warranty applies only to new company
manufactured products that can be identified by the trademark,
trade name, or logo affixed to it. This Limited Warranty does not
apply to any hardware product or any software, even if packaged
or sold with the product, as manufacturers, suppliers, or
publishers may provide a separate warranty for their own
products packaged with the bundled product.
The company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or other additional product or part
not covered by this warranty. Recovery or reinstallation of
programs, data or other information is not covered under this
Limited Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-supplied product,
(b) to damage caused by service performed by anyone other than
company approved Authorized Service Location, (c) to a product
or a part that has been modified without written company
permission, or (d) if any serial number has been removed or
defaced, or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished product
sold “AS IS” by some retailers.
This Limited Warranty does not cover:
• Shipping costs for returning defective product.
• Labor charges for installation or setup of the product, adjustment
of customer controls on the product, and installation or repair of
antenna/signal source systems outside of the product.
• Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary
content for extended periods, product cosmetic appearance
items due to normal wear and tear, unauthorized repair or
other cause not within the control of the company.
• Damage or claims for products not being available for use, or
for lost data or lost software.
• Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable it
to operate in any country other than the country for which it
was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verification receipt
can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1 866 341 3738
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE
CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED
BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO
THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of incidental
or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501
FUNAI CORPORATION, Inc.
19900 Van Ness Avenue, Torrance, CA 90501
A44F1UT
★★★★★
Download PDF