INTERNATIONAL
Low Profile Portion Control Grinder
with 1 Hopper
Item#
Project
Date
Features
Portion Control Grinder
• Just 8.64” (21.95 cm) wide and a low profile height of 15.1” (38.4 cm).
• Professional grind provided by large 3.19” (8.1 cm) diameter burrs.
• Powered by high torque motor.
• Large, clear bean hopper merchandises 6 lbs. (2.72 kg) of fresh coffee beans.
• Easy access on back for grind weight adjustment.
• Four-year warranty on grinding burrs.
• Tested to CE Standards.
LPG
(funnel sold separately)
Dimensions: 15.1” H x 8.64” W x 10” D
(38.4cm H x 21.95cm W x 25.4cm D)
For current specification sheets and other information, go to www.bunn.com.
International models may vary in appearance.
Related Products
Precision Burrs
All BUNN grinders use precision burrs to
cut (not crush) the coffee beans and deliver
consistent grind distribution. BUNN burrs
are rated at a Rockwell hardness of 66C,
resulting in an exceptionally long burr life. Short French Press Funnel
Product Number: 38124.0000
Kit, Fine Grind
Product Number: 43724.0000
2/13
C1.4
Dimensions & Specifications
Model
Product #
Volts
Amps
Capacity
2.72 kg
Shipping
Weight
10.5 kg
Plug
Attached
A
LPGA (50 Hz)
20580.0132
230
1.5
LPGA (50Hz)
20580.0137
230
1.5
2.72 kg
10.5 kg
B
LPGA (50 Hz)
20580.0121
230
1.5
2.72 kg
(6 lbs.)
10.5 kg
(23 lbs.)
C
Agency
Electrical: 220-240 volt models require 2-wires plus ground service rated 220-240V, single phase, 50/60 Hz., 3⁄4 HP motor.
Plug Type
(A)
EURO CE
(B)
UK CE
(C)
IRAM
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • USA • +1-217-529-6601 • Fax +1-217-529-2827 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in centimeters.
2/13 © Bunn-O-Matic Corporation