Product Catalog - Franklin Electric Australia

General Purpose
Product Catalog
• Industrial Pumps • Sump, Effluent, and Sewage Pumps
• HVACR Pumps • Magnetic Drive Pumps
Hard-Working Pumps for Commercial,
Industrial and Home Applications
Water Displays • Fountains • Air Conditioners
Machine Tool Cooling • More!
Small Submersible Pump
1 Series
• Epoxy-coated cast aluminum
housing
• Oil-filled motor
• Pumps 776 litres per hour (LPH)
• Screened inlet; 2.25 m maximum
lift; thermal overload protection
on most
See page 3 for more information.
Small Submersible Nylon Pump
•
•
•
•
Corrosion-resistant nylon housing
Oil-filled motor
909 litres per hour (LPH) capacity
Screened inlet; 2.29 m maximum
lift; thermal overload protection
NK-1 Series
See page 5 for more information.
Portable Utility Pump
5 Series
• Our most versatile pump
• Oil-filled motor; epoxy-coated
cast aluminum housing
• Screened inlet; 5.64 m maximum
lift; pumps down to 3.175 mm
• For submersible use only
See page 7 for more information.
Condensate Removal Pump
•
•
•
•
Shallow tank
1/150 HP oil-filled motor
776 litres per hour (LPH)
Advanced mechanical switch
1-ABS Series
See page 18 for more information.
See your distributor for more information, or email
Franklin Electric at export@LittleGiantPump.com.
General Purpose Product Catalog
• Industrial Pumps • Sump, Effluent, and Sewage Pumps
• HVACR Pumps • Magnetic Drive Pumps
Table of Contents
Industrial Pumps
Wastewater Pumps continued
Oil-filled Pumps
1 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P-AAA Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NK Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cast Iron Effluent Pumps
6E Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8E Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10E Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16EH Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
3
4
4
5
5
Epoxy Encapsulated Pumps
PE Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
WGP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Parts Washer Pumps
1-YS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PE Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Utility Pumps
365 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
BPLA Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Wastewater Pumps
Cast Iron Sump Pumps
5.5 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
WRS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cast Iron Sewage Pumps
10S Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
10SH Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
16S Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
High Pressure Pumps
35-OM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Pool Cover Pumps
APCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Pump Accessories
RS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
HW Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
HVACR Pumps
Condensate Removal Pumps . . . . . . . . . . . . . . . . . . 18-19
Magnetic Drive Pumps
Chemical Transfer Pumps . . . . . . . . . . . . . . . . . . . . . 20-21
Viton® is a registered trademark of Dupont Performance Elastomers.
©2010 Franklin Electric Co., Inc.
Little Giant® is a registered trademark of Franklin Electric Co., Inc.
12
13
13
14
2
Industrial Pumps
1 SERIES
2 SERIES
Oil-filled, Direct Drive
Oil-filled, Direct Drive
Applications
Applications
• Water transfer or recirculation, and water displays
• Submersible, water transfer or recirculation, water displays and air
conditioning
Features
Features
• Polyethylene screen
• IP 68
• 1/150 HP oil-filled, direct drive
motor
• Designed for continuous duty,
submersible use only
• Epoxy-coated cast aluminum
housing and cover
• Polypropylene volute and elbow
• Nitrile shaft seal
• 1/40 HP oil-filled motor
• Epoxy-coated cast aluminum
housing and cover
• Nylon volute
• Nitrile shaft seal
• Polypropylene screen
• IP 68
Series Specifications
Series Specifications
Intake: Smooth
Electrical: 230V, 50Hz, 0.5A, 52W
(501038);
230V, 50/60Hz, 0.6A,
70W (501016)
Capacity: 13 LPM @ .31 m
(501038);
13 LPM @ .31 m
(501016)
Shut Off: 1.89 m
(501038);
2.26 m (501016)
Discharge: 1/4" MNPT (6 mm)
Electrical: 230V, 50Hz, 0.6A, 71W
(502038);
230V, 50/60Hz, 0.9A,
100W (502216)
Capacity: 19 LPM @ .31 m
(502116, 502216);
18 LPM @ .31 m
(502038)
Shut Off: 3.6 m (502216);
2.77 m (502038)
Discharge: 1/4" MNPT (6 mm)
Intake: 3/8" FNPT (10 mm)
Model Characteristics
Model Characteristics
Item #
Model
Volts
Cord
Weight
(Kg.)
Bar
List/Cert.
Item #
Model
Volts
Cord
Weight
(Kg.)
Bar
List/Cert.
501038
1
230
3m
1.81
0.19
CE
502038
2E-38N
230
3m
2.26
0.28
CE
501016
1-Y
1.73
0.23
UR
502216
2E-38NY
230 3.66 m
2.34
0.36
UR/C-CSA
230 3.66 m
Performance Curves
Performance Curves 2E-38N
3.0
Total Head in Meters
Total Head in Meters
2.0
1.6
1.2
0.8
0.4
0.0
2.5
2.0
1.5
1.0
0.5
0.0
0
3
6
9
12
0
15
5
10
15
20
Capacity - Litres per Minute
Capacity - Litres per Minute
230 volt, 50Hz
230 volt, 50Hz
3
25
Industrial Pumps
3 SERIES
4 SERIES
Oil-filled, Direct Drive
Oil-filled, Direct Drive
Applications
Applications
• Submersed or in-line use, water transfer or recirculation, water displays,
air conditioning and machine tool coolants
• Submersible only, water transfer or recirculation, water displays,
air conditioning and machine tool coolants
Features
Features
• 1/15 HP oil-filled, heavy-duty
motor
• Epoxy-coated cast aluminum
housing and cover
• Nylon volute
• Aluminum backplate
• Viton® shaft seal
• Polypropylene screen
• IP 68
• 1/12 HP oil-filled motor
• Epoxy-coated cast aluminum
housing and cover
• Nylon volute
• Aluminum backplate
• Viton® shaft seal
• IP 68
Series Specifications
Series Specifications
Intake: 1/2" FNPT (13 mm)
Electrical: 230V, 50Hz, 1.3A, 166W
(503038);
230V, 50/60Hz, 1.7A,
200W (503216)
Capacity: 32 LPM @ .31 m
(503038);
38 LPM @ .31 m
(503216)
Shut Off: 5.27 m (503038);
6.4 m (503216)
Discharge: 1/2" MNPT (13 mm)
Capacity: 41 LPM @ .31 m
Shut Off: 5.6 m
Discharge: 1/2" MNPT (13 mm)
Intake: 3/4" FNPT (19 mm)
Model Characteristics
Model Characteristics
Item #
Model
Volts
Cord
Weight
(Kg.)
Bar
List/Cert.
Item #
Model
503038
3E-12N
230
3m
4
0.53
CE
504216
4E-34NRY
503216
3E-12NRY
230
3.66 m
3.85
0.64
UR
Performance Curves 3E-12N
Volts
Cord
230 3.66 m
Weight
(Kg.)
Bar
List/Cert.
3.85
0.75
UR
Performance Curves
6.0
6.0
5.0
5.0
Total Head in Meters
Total Head in Meters
Electrical: 230V, 50/60Hz, 1.8A,
210W
4.0
3.0
2.0
4.0
3.0
2.0
1.0
1.0
0.0
0.0
0
10
20
30
40
0
10
20
30
40
Capacity - Litres per Minute
Capacity - Litres per Minute
230 volt, 50Hz
230 volt, 50Hz
4
50
60
Industrial Pumps
P-AAA SERIES
NK SERIES
Oil-filled, Direct Drive
Oil-filled, Direct Drive
Applications
Applications
• Water transfer or recirculation, and water displays
• Submersible, water transfer or recirculation, water displays, air
conditioning and machine tool coolants, and mild acids
Features
Features
• 1/160 HP oil-filled, direct drive
motor
• Designed for continuous duty,
submersible use only
• Glass-filled nylon housing, cover,
and impeller
• Nitrile shaft seal
• IP 68
• 1/150 HP oil-filled motor
(526076)
• 1/40 HP oil-filled motor
(527016, 527076, 527180)
• Nylon housing, cover, and volute
• Viton® shaft seal
• Polyethylene screen
• IP 68
Series Specifications
Series Specifications
Capacity: 11 LPM @ .31 m
Shut Off: 1.40 m
Discharge: 1/4" MNPT (6 mm)
Intake: Smooth
Intake: Smooth
Capacity: 22 LPM @ .31 m
(526076);
Electrical: 230V, 50Hz, 0.7A, 70W
19 LPM @ .31 m
(526076);
(527016, 527180);
230V, 50Hz, 0.9A, 100W
19 LPM @ .31 m (527076)
(527016);
230V, 50Hz, 0.9A, 100W
Shut Off: 2.29 m (526076);
(527076);
3.75 m (527016, 527180);
100V, 50/60Hz, 2.1A,
2.90 m (527076)
87W (527180)
Discharge: 1/4" MNPT (6 mm)
Electrical: 230V, 50/60Hz, 0.4A,
30W
Model Characteristics
Model Characteristics
Item #
Model
Volts
Cord
523112
P-AAA
230 3.66 m
Weight
(Kg.)
Bar
List/Cert.
Item #
Model
Volts
Cord
Weight
(Kg.)
Bar
List/Cert.
1.43
0.5
–
526076
NK-1
230
3.66 m
1.89
0.23
–
527016
NK-2
230
3.66 m
2.19
0.37
–
527076
NK-2
230
3.66 m
2.19
0.29
–
527180
NK-2
Japan
100
1.83 m
1.96
0.37
–
Performance Curves
Performance Curves NK-1
3.0
Total Head in Meters
Total Head in Meters
1.6
1.2
0.8
0.4
0.0
2.5
2.0
1.5
1.0
0.5
0.0
0
3
6
9
12
0.0
5.0
10.0
15.0
Capacity - Litres per Minute
Capacity - Litres per Minute
230 volt, 50Hz
230 volt, 50Hz
5
20.0
Industrial Pumps
PE SERIES
Epoxy Encapsulated, Direct Drive
PE-1
Applications
Performance Curves
1.5
Features
1.3
Total Head in Meters
• Submersible, water transfer or recirculation, water displays, air
conditioning and machine tool coolants
• 1/200 HP epoxy-encapsulated
motor (518039)
• 1/40 HP epoxy-encapsulated
motor (518477, 518438)
• 1/35 HP epoxy-encapsulated
motor (518638, 518678,
589237)
• Glass-filled polyester housing
and cover
• Polypropylene volute and screen
• Nitrile shaft seal
• Submersible use only
• IP 68
PE-1F
1.0
0.8
0.5
0.3
0.0
Series Specifications
Intake: Screened (518039, 518438,
518638, 518678);
3/4" FNPT (19 mm) with
Screen (518477);
1/2" FNPT (13 mm)
(589237)
Electrical: 230V, 50Hz, 0.3A, 40W
(518039);
230V, 50Hz, 0.4A, 45W
(518477, 518438);
230V, 50Hz, 0.5A, 50W
(518638);
230V, 50Hz, 0.5A, 65W
(518678);
230V, 50Hz, 0.5A, 58W
(589237)
0
2
4
6
8
10
12
Capacity - Litres per Minute
230 volt, 50Hz
Performance Curves
PE-2F
3.0
Total Head in Meters
Capacity: 11 LPM @ .31 m
(518039);
18 LPM @ .31 m
(518477, 518438);
27 LPM @ .31 m
(518638, 518678);
19 LPM @ .31 m
(589237)
Shut Off: 1.37 m (518039,
589237);
2.53 m (518477,
518438);
2.75 m (518638, 518678)
Discharge: 1/4" MNPT (6 mm);
3/8" MNPT (10 mm)
(518438, 518638,
518678)
PE-2.5F
PE-2H
2.5
2.0
1.5
1.0
0.5
0.0
0
4
8
12
16
20
Capacity - Litres per Minute
230 volt, 50Hz
Model Characteristics
Performance Curves
Model
Volts
Cord
Weight
(Kg.)
Bar
List/Cert.
518039
PE-1F-IF
230
3m
1.43
0.14
CE
518477
PE-2F
230
2.45 m
1.96
0.26
–
518438
PE-2.5F-IF
230
3m
2.04
0.26
CE
518638
PE-2.5F-IF
230
3m
2.19
0.28
CE
518678
PE-2.5F-WG
230
4.57 m
2.26
0.28
–
589237
PE-1.5-MDI-SC
230
3m
2.27
0.29
CE
3.0
Total Head in Meters
Item #
PE-2.5F
2.5
2.0
1.5
1.0
0.5
0.0
0
5
10
15
20
Capacity - Litres per Minute
230 volt, 50Hz
6
25
30
Industrial Pumps
WGP SERIES
Epoxy Encapsulated, Direct Drive
Performance Curves WGP-65
Applications
• Ideal for pond filtration and water effects (i.e. waterfall and stream
applications found in water gardens)
7
Total Head in Meters
Features
• Nitrile shaft seal
• Includes 1-1/4" BSPP x 1" barb
elbow (25.4 mm) for 1" I.D.
(25.4 mm) tubing
• IP 68
• Two-year warranty
• 1/8 HP PSC motor (507256,
507265, 507276)
• 5/8 HP PSC motor (507295)
• Unique dual discharge
• Motor sealed in stainless steel
housing enclosed in Polypro
housing
• Designed for continuous duty
• Polypro housing, cover and volute
6
5
4
3
2
1
0
Series Specifications
Model Characteristics
Item #
Model
Volts
Cord
Weight
(Kg.)
Bar
List/Cert.
507256
WGP-55
230
10 m
6.57
0.60
CE
507265
WGP-65
230
10 m
4.76
0.61
CE
507276
WGP-75
230
10 m
5.21
0.79
CE
507295
WGP-95
230
10 m
7.03
0.81
CE
2000
4000
6000
8000
Capacity - Litres per Hour
230 volt, 50Hz
Performance Curves
WGP-75
8
Total Head in Meters
Shut Off: 5.5 m (507256);
6.1 m (507265);
7.6 m (507276);
8.1 m (507295)
Discharge: 1-1/4" FNPT (32 mm)
Electrical: 230V, 50Hz, 1.2A, 270W
(507256, 507265);
230V, 50Hz, 3.3A, 700W
(507276, 507295)
Capacity: 3420 LPH @ 1 m
(507256);
7200 LPH @ 1 m
(507265);
9400 LPH @ 1 m
(507276);
13630 LPH @ 1 m
(507295)
0
7
6
5
4
3
2
1
0
0
2000
4000
6000
8000
10000
12000
15000
Capacity - Litres per Hour
230 volt, 50Hz
Performance Curves WGP-55
Performance Curves WGP-95
10
6
Total Head in Meters
Total Head in Meters
7
5
4
3
2
1
0
0
1000
2000
3000
8
6
4
2
0
4000
Capacity - Litres per Hour
0
3000
6000
9000
Capacity - Litres per Hour
230 volt, 50Hz
230 volt, 50Hz
7
Industrial Pumps
5 SERIES
1-YS SERIES
Epoxy Encapsulated, Direct Drive
Parts Washer Pumps
Applications
Applications
• Submersible, water transfer or recirculation, water displays, air
conditioning and machine tool coolants
• Submersible for pumping unheated metal parts cleaning solvent which is
UL classified as PJQU
Features
Features
• 1/6 HP shaded pole motor
• Garden hose adapter and
removable inlet screen
• Epoxy-coated cast aluminum
housing
• Nylon volute
• Viton® shaft seal
• Stainless steel shaft
• IP 68
• 1/150 HP oil-filled motor
• Cast aluminum housing
• Nylon volute
• Viton® shaft seal
• Polyethylene screen
• 1" conduit fitting (25.4 mm)
• IP 68
Series Specifications
Series Specifications
Capacity: 4070 LPH @ .31 m
Shut Off: 5.64 m
Discharge: 1" BSPT
Intake: Screened
Electrical: 230V, 50Hz, 3.0A, 250W
Capacity: 776 LPH @ .31 m
(501036);
719 LPH @ .31 m
(501027)
Shut Off: 2.25 m
(501036);
1.89 m (501027)
Discharge: 1/4" MNPT (6 mm)
Model Characteristics
Model Characteristics
Weight
(Kg.)
Bar
List/Cert.
Item #
Model
Volts
230 3.66 m
4.19
0.56
–
501027
1-YS
5-MSPR
230
3m
4.19
0.56
CE
501036
1-YS
5-MSPR
230
10 m
5.1
0.56
CE
Item #
Model
505376
5-MSPR
505378
505379
Volts
Cord
Performance
Performance Curves
Curves
Bar
List/Cert.
230 1.83 m
1.58
2.7
CE
230 1.83 m
1.58
0.23
–
2.5
Total Head in Meters
Total Head in Meters
Weight
(Kg.)
Cord
Performance Curves
6.0
4.0
2.0
0.0
Intake: Smooth
Electrical: 230V, 50Hz, 0.6A, 70W
2.0
1.5
1.0
0.5
0.0
0
1000
2000
3000
4000
0
5000
200
400
600
Capacity - Litres per Hour
Capacity - Litres per Hour
230 volt, 50Hz
230 volt, 50Hz
8
800
Industrial Pumps
PE SERIES
365 SERIES
Parts Washer Pumps
Utility Pumps
Pony Pump
Applications
Applications
• For submerged use in parts washers using aqueous solutions or UL
listed solvents
• Commercial, industrial and home uses where liquid must be transferred
Features
Features
• 1/40 HP epoxy-encapsulated
motor
• Polyester housing
• 1/2" MNPT Master Builders
conduit fitting
• Rated for continuous duty
• IP 68
• 1/10 HP non-submersible
stainless steel pump body
• 12 VDC motor
• 2.1 m with clips cord
• Self priming for instant delivery or
de-watering up to 1.8 m
• Rugged metallic handle for easy
portability
Series Specifications
Series Specifications
Capacity: 1098 LPH @ .31 m
Shut Off: 2.53 m
Discharge: 1/4" MNPT (6 mm)
Electrical: 230V, 50Hz, 0.4A, 45W
Capacity: 1136 LPH @ .31 m
Shut Off: 14.02 m
Electrical: 12 VDC, 7.0A, 165W
Model Characteristics
Model Characteristics
Item #
Model
14940101
PE-2YSA
Volts
Cord
230 1.83 m
Weight
(Kg.)
Bar
List/Cert.
Item #
Model
2.04
0.26
CE
555203
365S
Volts
Cord
12 VDC .31 m
• Dual threaded intake and
discharge with both 3/4" (19
mm) male garden hose thread
and 3/4" FNPT (10 mm)
• IP 53
Weight
(Kg.)
Bar
List/Cert.
1.81
1.4
–
Pony Pump® Replacement Impeller & Brush Kits
Performance Curves
Item #
Model
Includes
555706
IRK-360
(2) Each – Nitrile Impeller with SST Insert, Nitrile Cover Gaskets
555713
IRK-360S (2) Each – Nitrile Impeller with SST Insert, Nitrile Cover Gaskets
Performance Curves
15.0
2.5
Total Head in Meters
Total Head in Meters
3.0
2.0
1.5
1.0
0.5
0.0
0
200
400
600
800
1000
12.0
9.0
6.0
3.0
0.0
1200
Capacity - Litres per Hour
0
300
600
900
Capacity - Litres per Hour
230 volt, 50Hz
230 volt, 50Hz
9
1200
Industrial Pumps
BPLA SERIES
Utility Pumps
Applications
• Water removal from compact spaces such boat bilges, recreational
vehicles, or bait tanks
Features
• 12.7 mm inlet plate accessory
included
• Accepts 5/8" ID (16 mm) hose
• IP 68
• 12 VDC motor
• Submersible or in-line use
• Designed for intermittent use only
• Plastic and stainless steel
construction
• Compact, light weight, operates
in any position
• Port connections equipped with
bilge inlet plate with strainer
Series Specifications
Capacity: 1330 LPH @ .31 m
Shut Off: 3.35 m
Electrical: 12 VDC, 20A
Model Characteristics
Item #
Model
556001
BPLA
Volts
Cord
12 VDC 1.42 m
Weight
(Kg.)
Bar
List/Cert.
0.45
0.33
–
900
1200
Performance Curves
Total Head in Meters
5.0
4.0
3.0
2.0
1.0
0.0
0
300
600
1500
Capacity - Litres per Hour
230 volt, 50Hz
10
Wastewater Pumps
5.5 SERIES
6 SERIES
Cast Iron
Sump Pumps
Cast Iron
Sump Pumps
Applications
Applications
• Submersible, water transfer or recirculation, water displays, air
conditioning and machine tool coolants
• Basement sumps, dewatering, water transfer
Features
Features
• 1/4 HP shaded pole motor
• Zinc housing, polypropylene
volute
• 3/4" (19 mm) garden hose
adapter included
• Integral snap action float switch
• IP 68
• 1/3 HP shaded pole motor
• Designed for continuous duty
• Epoxy-coated cast iron housing
• 1-1/4" (32 mm) garden hose
adapter available
• Carbon/ceramic shaft seal
• Upper and lower sintered sleeve
bearings
Series Specifications
Series Specifications
Capacity: 123 LPM @. 31 m
Shut Off: 5.21 m
Discharge: 1" FNPT (25 mm)
Electrical: 230V, 50Hz, 2.8A, 445W
Capacity: 156 LPM @ 1.53 m
Shut Off: 4.1 m
Discharge: 1-1/2" FNPT (38 mm)
Electrical: 230V, 50/60Hz, 4.5A,
720W
Model Characteristics
Model Characteristics
Switch Type On Level Off Level Weight
(Kg.)
Integral 178 mm - 51 mm - 4.64
505720 5.5-ASP 230 3.66 m Snap
Action 254 mm 127 mm
Item #
Model Volts
Cord
Bar
Item #
0.52
Switch On Level Off Level Weight
Type
(Kg.)
Integral 178 mm - 25.4 mm - 8.39
230 2.45 m Diaphragm
254 mm 101 mm
Model Volts Cord
506166 6-CIA
506266 6-CIM 230 3.66 m
Performance Curves
–
–
–
8.5
Bar
0.55
0.55
Performance Curves
6.0
5.0
5.0
Total Head in Meters
Total Head in Meters
• Available in automatic or manual
operation
• IP 68
4.0
3.0
2.0
1.0
0.0
4.0
3.0
2.0
1.0
0.0
0
25
50
75
100
125
Capacity - Litres per Minute
0
40
80
120
Capacity - Litres per Minute
230 volt, 50Hz
230 volt, 50Hz
11
160
Wastewater Pumps
WRS SERIES
6E SERIES
Cast Iron
Sump Pumps
Cast Iron
Effluent Pumps
Drainosaur®
WRS-6
Applications
Applications
• Impractical gravity drainage areas, under sinks, laundry trays
• Basement sumps, dewatering, water transfer, light effluent
Features
Features
• Pre-assembled for easy
installation
• Two tank size options
• Cylindrical polypropylene tank
• Easy-to-remove filter trap
• IP 68
• 1/3 HP shaded pole motor
• Designed for continuous duty
• Epoxy-coated cast iron housing
• Carbon/ceramic shaft seal
• Upper and lower sintered sleeve
bearings
• Available in automatic or manual
operation
• IP 68
WRSC-6
Series Specifications
Series Specifications
Capacity: 156 LPM @ 1.53 m
Electrical: 230V, 50/60Hz, 4.5A,
720W (506056);
Shut Off: 4.1 m
230V, 50/60Hz, 5.0A,
Tank Capacity: 18.9 litres (506056);
720W (506066)
13.3 litres (506066)
Capacity: 159 LPM @ 1.5 m
Shut Off: 4.6 m
Discharge: 1-1/2" FNPT (38 mm)
Electrical: 230V, 50/60Hz, 6.0A,
890W
Model Characteristics
Model Characteristics
Lid Side Lid Top
Lid Top
Intake Discharge Vent
Port
Port
Port
1-1/2"
1-1/2"
2"
506056 WRS-6 230 2.45 m (38 mm) (38 mm) (51 mm)
1-1/2"
1-1/2"
2"
506066 WRSC-6 230 2.45 m (38
mm) (38 mm) (51 mm)
Item #
Model
Volts
Cord
Weight
(Kg.)
Bar
12.24
0.55
11.33
0.55
Switch On Level Off Level Weight Bar List/
Type
(Kg.)
Cert.
Integral 178 mm - 51 mm 506745 6E-CIA-SFS 230 4.57 m Snap 254 mm 127 mm 12.7 0.46
–
Action
Item #
Performance Curves
6.0
4.0
Total Head in Meters
Total Head in Meters
Volts Cord
Performance Curves
5.0
3.0
2.0
1.0
0.0
Model
0
40
80
120
4.5
3.0
1.5
0.0
160
0
40
80
120
Capacity - Litres per Minute
Capacity - Litres per Minute
230 volt, 50Hz
230 volt, 50Hz
12
160
Wastewater Pumps
8E SERIES
10E SERIES
Cast Iron
Effluent Pumps
Cast Iron
Effluent Pumps
Applications
Applications
• Dewatering, water transfer, effluent and wastewater removal
• Dewatering, water transfer, effluent and wastewater removal
Features
Features
• 1/3 HP shaded pole motor
• Designed for continuous duty
• Epoxy-coated cast iron housing
• Carbon/ceramic shaft seal
• Upper and lower sintered sleeve
bearings
• IP 68
• 1/2 HP split phase motor
• Designed for continuous duty
• Epoxy-coated cast iron housing
• High impact thermoplastic base
• Carbon/ceramic shaft seal
• Upper and lower ball bearings
• IP 68
Series Specifications
Series Specifications
Capacity: 208 LPM @ 1.53 m
Shut Off: 5.18 m
Discharge: 1-1/2" FNPT (38 mm)
Electrical: 230V, 50Hz, 4.4A, 630W
Model Characteristics
Capacity: 303 LPM @ 1.53 m
Shut Off: 5.3 m
Discharge: 1-1/2" FNPT (38 mm)
Electrical: 208-230V, 50/60Hz,
6.5A, 900W
Model Characteristics
Item #
Model
Volts
Cord
Weight
(Kg.)
Bar
List/Cert.
509060
8E-CIM
230
4.57 m
11.33
0.52
–
Weight
(Kg.)
Bar
List/Cert.
511275 10E-CIM 208-230 4.57 m 15.87
0.79
UL/CSA
Item #
Performance Curves
Cord
6.0
Total Head in Meters
Total Head in Meters
Volts
Performance Curves
6.0
4.0
2.0
0.0
Model
0
50
100
150
200
250
Capacity - Litres per Minute
4.5
3.0
1.5
0.0
0
100
200
300
Capacity - Litres per Minute
230 volt, 50Hz
230 volt, 50Hz
13
400
Wastewater Pumps
16EH SERIES
10S SERIES
Cast Iron
Effluent Pumps
Cast Iron
Sewage Pumps
Applications
Applications
• Dewatering, water transfer, effluent and wastewater removal
• Effluent and sewage waste transfer
Features
Features
• Upper and lower ball bearings
• IP 68
• 1 HP PSC motor, 3-phase
• Completely submersible,
designed for continuous duty
• High head model
• Epoxy-coated cast iron housing,
cover, volute, and non-clog
impeller
• Carbon/ceramic shaft seal
Series Specifications
Series Specifications
Capacity: 189 LPM @ 9.15 m
Shut Off: 16.8 m
Discharge: 2" FNPT (51 mm)
Electrical: 460-380V, 60/50Hz,
3.2A, 955W
Capacity: 416 LPM @ 1.53 m
Shut Off: 4.1 m
Discharge: 2" FNPT (51 mm)
Electrical: 208-230V, 50/60Hz,
5.8/6.6A, 1100W
(511475);
208-230V, 50/60Hz,
4.1/4.6A, 1086W
(511565)
Model Characteristics
Model Characteristics
Item #
Model
514540
16EH-CIM
3 Phase
Volts
Cord
460-380 6.10 m
Weight
(Kg.)
Bar
List/Cert.
37.2
2.47
UL/CSA
• Vortex glass filled nylon impeller
• Available in automatic and
manual operation
• IP 68
• 1/2 HP split phase motor
• 1/2 HP permanent split capacitor
motor on 10S-CIA-SFS
• Designed for continuous duty
• Epoxy-coated cast iron housing
and volute
• 2" FNPT (51 mm) discharge
• Carbon/ceramic shaft seal
• Upper and lower ball bearings
Item #
Model
511475 10S-CIM
Volts
Cord
208- 4.57 m
230
Switch On Level Off Level Weight
(Kg.) Bar List/Cert.
–
–
–
19.5 0.61 UL/CSA
Integral 178 mm - 51 mm 511565 10S-CIA-SFS 208Snap 254 mm 127 mm 21.31 0.62 UL/CSA
230 7.62 m Action
Performance Curves
Performance Curves
5.0
15
Total Head in Meters
Total Head in Meters
18
12
9
6
3
0
0
50
100
150
4.0
3.0
2.0
1.0
0.0
200
Capacity - Litres per Minute
0
100
200
300
400
Capacity - Litres per Minute
230 volt, 50Hz
230 volt, 50Hz
14
500
Wastewater Pumps
10SH SERIES
16S SERIES
Cast Iron
Sewage Pumps
Cast Iron
Sewage Pumps
Applications
Applications
• Effluent and sewage waste transfer
• Effluent and sewage waste transfer
Features
Features
• 1/2 HP split phase, relay start
motor
• Designed for continuous duty
• High head model
• Epoxy-coated cast iron housing
and volute
• 2" FNPT (51 mm) discharge
• Carbon/ceramic shaft seal
• Upper and lower ball bearings
• IP 68
Series Specifications
Series Specifications
Capacity: 360 LPM @ 1.53 m
Shut Off: 6.1 m
Discharge: 2" FNPT (51 mm)
Electrical: 208-230V, 50/60Hz,
6.7/5.5A, 900W
Capacity: 492 LPM @ 3.05 m
Shut Off: 7.3 m
Discharge: 3" FNPT (76 mm)
Electrical: 460-380V, 60/50Hz,
3.0A, 885W
Model Characteristics
Model Characteristics
Item #
Model
511480 10SH-CIM
Volts
Cord
Weight
(Kg.)
208-230 4.57 m 18.82
Bar
List/Cert.
0.85
UL/CSA
Performance Curves
Item #
Model
514730
16S-CIM
3 Phase
Bar
List/Cert.
460-380 6.10 m 40.82
1.06
UL/CSA
9.0
Total Head in Meters
Total Head in Meters
Cord Weight
(Kg.)
Volts
Performance Curves
9.0
6.0
3.0
0.0
• Two-vanes non-clog epoxycoated cast iron impeller
• IP 68
• 1 HP permanent split phase
capacitor motor
• 3 phase
• Designed for continuous duty
• Epoxy-coated cast iron housing
and volute
• 3" FNPT (76 mm) discharge
• Carbon/ceramic shaft seal
• Upper and lower ball bearings
0
100
200
300
6.0
3.0
0.0
400
0
100
200
300
400
Capacity - Litres per Minute
Capacity - Litres per Minute
230 volt, 50Hz
230 volt, 50Hz
15
500
Wastewater Pumps
35-OM
APCP
High Pressure Pumps
Pool Cover Pumps
Applications
Applications
• Non-submersible, high pressure, carpet cleaning, dispenser display, and
pressure washers
• Ideal for removing water from all types of pool covers
Features
Features
• 2.46 Bar
• IP 22
• 1/11 HP fan cooled motor
• Thermoplastic housing
• Nylon volute
• Carbon/ceramic shaft seal
• Double-insulated motor
(non-replaceable brushes
last 500-1000 hours)
• Includes bypass adapter
• 1/3 HP automatic pump with
efficient PSC-type motor
• Mechanical float for dependability
• On level 51 mm, Off level
38 mm
• Unique large base design for
stability
• Convenient integrated handle for
portability
Series Specifications
Series Specifications
Capacity: 625 LPH @ 3 m
Shut Off: 21.9 m
Discharge: 3/8" Barbed (9.5 mm)
Electrical: 230V, 50/60Hz, 0.6A,
132W
Capacity: 6435 LPH @ .31 m
Shut Off: 6.55 m
Discharge: 1" FNPT (25.4 mm)
Electrical: 230V, 50Hz, 1.2A, 270W
Model Characteristics
Model Characteristics
Item #
Model
Volts
Watts
Cord
532012
35-OM
230
132
.61 m
Weight List/Cert.
(Kg.)
1.21
Item #
–
Model
577303 APCP-1700
• 1" FNPT (25 mm) discharge with
garden hose adapter
• 10 m power cord
• Three-year warranty
• 0.3 Bar
• IP 68
Volts
Watts
Cord Weight
(Kg.) List/Cert.
230
270
10 m
6.23
CE
Replacement Seal Kit
Item #
Model
599106
35-OM-SK
Weight
(Kg.)
Housing, carbon seal, impeller with
ceramic seal and O-ring
0.08
Performance Curves
Performance Curves
8.0
Total Head in Meters
Total Head in Meters
25.0
20.0
15.0
10.0
5.0
0.0
6.0
4.0
2.0
0.0
0
200
400
600
800
0
2000
4000
6000
Capacity - Litres per Hour
Capacity - Litres per Hour
230 volt, 50Hz
230 volt, 50Hz
16
8000
Wastewater Pumps
Pump Accessories
RS SERIES
Piggyback Diaphragm Switch
Applications
• Converts manual pumps to automatic operation
Features
• For use with 230V pumps up to
1/2 HP rated at 10 amps or less
• “On” 15.3 cm – 22.9 cm, “off”
2.6 cm – 10.2 cm
• Unit comes with 2.45 m stripped
wire cord end
Model Characteristics
Weight List/Cert.
(Kg.)
Item #
Model
Volts
Amps
Cord
599010
RS-5
230
10.0 2.45 m
0.68
–
HW SERIES
Low Voltage Water Alarm
Applications
• Remote water sensor and alarm
Features
• Remote sensor detects water and
sounds alarm
• Sensor and alarm connected by
1.83 m of wire
• Adaptable with additional wire
(not included) for locating up to
15.2 m apart
• Solid state electronics powered by
9V battery (not included)
• 5-decibel alarm sounds for 3 days
• Low battery warning
• Test bar for system check
Model Characteristics
Item #
Model
513350
HW-9
Volts
Cord
9V DC Battery 1.83 m
Weight
(Kg.)
0.13
17
HVACR Pumps
Condensate Removal Pumps
ABS Series: In Pan Shallow Tank
Item #
Model
Volts
Hz
HP
IP
Cord
Listing
550531
1-ABS
230
50
1/150
68
3m
CE
551030
2-ABS
230
50/60
1/40
68
3.35 m
–
551031
2-ABS
230
50
1/40
68
3.35 m
CE
551330
3-ABS
230
50/60
1/12
68
3.35 m
–
551370
3-ABS
230
50
1/12
68
3.35 m
CE
VCL Series: Super High Capacity Large Tank – 4 Litre Capacity
Item #
Model
Volts
Hz
HP
IP
Cord
Listing
553137
VCL-24S
230
50
1/15
20
1.83 m
CE
553138
VCL-45S
230
50
1/4
20
1.83 m
CE
553211
VCL-24ULS
230
50/60
1/18
22
1.83 m
UL/CSA
553245
VCL-45ULS
230
50/60
1/5
20
1.83 m
UL/CSA
EC Series: Mini-Split, Split and Wall or Ceiling Mount Split System
Item #
Model
Volts
Hz
Listing
553450
EC-400
230
50/60
CE
PCS Series: Peristaltic - For Single/Multi Wall Units, Fan Coils,
Cassettes, Ceiling Mounted or Wall Console Units
Item #
Model
Volts
Hz
IP
Cord
Listing
553670
PCS-10
230
50/60
52
1.98 m
CE
553671
PCT-10
230
50/60
52
1.98 m
CE
553672
PCR-10
230
50/60
52
1.98 m
CE
553673
PCR-10S
230
50/60
52
1.98 m
CE
18
HVACR Pumps
Condensate Removal Pumps
continued
EC-OP Series: Mini-split for Wall Mounted Units
Item #
Model
Volts
Hz
IP
Listing
553701
EC-OP
230
50/60
54
CE
553711
EC-OP-K
230
50
54
CE
VCC Series: Low Profile Compact Tank – 1 Litre Capacity
Item #
Model
Volts
Hz
HP
IP
Cord
Listing
554138
VCC-20S
230
50
1/30
20
1.8 m
CE
554210
VCC-20ULS
230
50/60
1/30
20
1.8 m
UL
VCMA Series: High Capacity Tank – 2 Litre Capacity
Item #
Model
Volts
Hz
HP
IP
Cord
Listing
554451
VCMA-20UL
230
50/60
1/30
20
1.8 m
UL/CSA
554455
VCMA-20ULS
230
50/60
1/30
22
1.8 m
UL/CSA
554461
VCMA-20ULST
230
50/60
1/30
20
1.8 m
UL
554471
VCMA-20S
230
50
1/30
20
1.8 m
CE
554472
VCMA-20ST
230
50
1/30
20
1.8 m
CE
554473
VCMA-20S
230
50
1/30
20
3m
CE
554481
VCMA-10
230
50
1/30
20
3m
CE
VCMX Series: High Capacity Tank – 1.25 Litre Capacity
Item #
Model
Volts
Hz
HP
IP
Cord
Listing
554500
VCMX-20S
230
50
1/30
24
3m
CE
554510
VCMX-20ST
230
50
1/30
24
3m
CE
554511
VCMX-20ST
230
50
1/30
24
1.8 m
CE
554532
VCMX-20S
230
50
1/30
24
1.8 m
CE
554541
VCMX-20S-C
230
50
1/30
24
1.8 m
CE
For additional information on Condensate pumps refer to our Heating,
Air Conditioning and Refrigeration Catalog, form number 996836.
19
Magnetic
HVACR
Specification
Pumps
DriveCharts
Pumps
Chemical Transfer Pumps
MD Series – For mildly corrosive chemicals and solutions
1-AA-MD Series
Item #
588002
Model
1-AA-MD
Volts
230
Hz
50/60
HP
1/200
Cord
.9 m
Listing
UR
Model
1-MD
Volts
230
Hz
50/60
HP
1/70
Cord
1.8 m
Listing
–
Model
2-MD
2-MD
Volts
230
230
Hz
50/60
50/60
HP
1/30
1/30
Cord
1.8 m
None
Listing
UR/CSA
CE
Model
TE-3-MD
Volts
230
Hz
50/60
HP
1/20
Cord
1.8 m
Listing
UR/CSA
Model
5-MD
Volts
230
Hz
50/60
HP
1/8
Cord
1.8 m
Listing
UR/CSA
1-MD Series
Item #
589012
2-MD Series
Item #
580012
580038
TE-3-MD Series
Item #
581012
5-MD Series
Item #
583012
SC Series – For semi corrosive chemicals and solutions
1.5-MDI-SC Series
Item #
589211
Model
1.5-MDI-SC
Volts
230
Hz
50/60
HP
1/35
Cord
1.8 m
Listing
UR/CSA
Volts
230
Hz
50
HP
1/35
Cord
3m
Listing
CE
Model
2-MD-SC
2-MD-SC
Volts
230
230
Hz
50/60
50/60
HP
1/30
1/30
Cord
1.8 m
None
Listing
UR/CSA
CE
Model
3-MD-SC
Volts
230
Hz
50
HP
1/12
Cord
1.8 m
Listing
UR
Volts
230
Hz
50
HP
1/15
Cord
1.8 m
Listing
–
Volts
230
Hz
50/60
HP
1/8
Cord
1.8 m
Listing
UR/CSA
Volts
230
Hz
50/60
HP
1/20
Cord
None
Listing
CE
Volts
230
230
Hz
50/60
50/60
HP
1/10
1/10
Cord
1.8 m
None
Listing
UR/CSA
CE
Volts
230
Hz
50/60
HP
1/10
Cord
1.8 m
Listing
UR/CSA
Volts
230
Hz
50/60
HP
1/8
Cord
None
Listing
CE
Volts
115-230
Hz
50/60
HP
1/3
Cord
None
Listing
UR/CSA
PE-1.5-MDI-SC Series
Item #
589237
Model
PE-1.5-MDI-SC
2-MD-SC Series
Item #
580513
580514
3-MD-SC Series
Item #
581576
3-MDQX-SC Series
Item #
581517
Model
3-MDQX-SC
5-MD-SC Series
Item #
583513
Model
5-MD-SC
TE-3-MD-SC Series
Item #
581538
Model
TE-3-MD-SC
TE-4-MD-SC Series
Item #
582514
582538
Model
TE-4-MD-SC
TE-4-MD-SC
TE-4MDX-SC Series
Item #
582515
Model
TE-4MDX-SC
TE-5-MD-SC Series
Item #
584538
Model
TE-5-MD-SC
TE-5.5-MD-SC Series
Item #
585504
Model
TE-5.5-MD-SC
20
Magnetic
HVACR
Specification
Pumps
DriveCharts
Pumps
Chemical Transfer Pumps
continued
SC Series continued
TE-5.5-MDQ-SC Series
Item #
Model
Volts
Hz
HP
Cord
Listing
585514
TE-5.5-MDQ-SC
115-230
50/60
1/2
None
UR/CSA
Volts
115-230
230
Hz
50/60
50/60
HP
1/2
1/2
Cord
None
None
Listing
UR/CSA
CE
TE-6-MD-SC Series
Item #
586504
586538
Model
TE-6-MD-SC
TE-6-MD-SC
HC and CK Series – For highly corrosive chemicals and solutions
2-MD-HC Series
Item #
580613
580614
Model
2-MD-HC
2-MD-HC
Volts
230
230
Hz
50/60
50/60
HP
1/30
1/30
Cord
1.8 m
None
Listing
UR/CSA
CE
Model
5-MD-HC
Volts
230
Hz
50/60
HP
1/8
Cord
1.8 m
Listing
UR/CSA
Volts
230
230
Hz
50/60
50/60
HP
1/20
1/20
Cord
1.8 m
None
Listing
UR/CSA
CE
Volts
230
230
Hz
50/60
50/60
HP
1/10
1/10
Cord
1.8 m
None
Listing
UR/CSA
CE
Volts
115-230
230
Hz
50/60
50/60
HP
1/8
1/8
Cord
1.8 m
None
Listing
UR/CSA
CE
Volts
115-230
Hz
50/60
HP
1/3
Cord
None
Listing
UR/CSA
Volts
115-230
Hz
50/60
HP
1/3
Cord
None
Listing
UR/CSA
Volts
115-230
115-230
Hz
50/60
50/60
HP
1/2
1/2
Cord
None
None
Listing
UR/CSA
UR/CSA
Volts
115-230
230
Hz
50/60
50/60
HP
1/2
1/2
Cord
None
None
Listing
UR/CSA
CE
Volts
115-230
230
230-460
Hz
50/60
50
50/60
HP
3/4
3/4
3/4
Cord
None
None
None
Listing
UR/CSA
CE
UR
Volts
115-230
230-460
Hz
50/60
50/60
HP
3/4
3/4
Cord
None
None
Listing
UR/CSA
UR
5-MD-HC Series
Item #
583613
TE-3-MD-HC Series
Item #
581614
581638
Model
TE-3-MD-HC
TE-3-MD-HC
TE-4-MD-HC Series
Item #
582614
582638
Model
TE-4-MD-HC
TE-4-MD-HC
TE-5-MD-HC Series
Item #
584604
584638
Model
TE-5-MD-HC
TE-5-MD-HC
TE-5.5-MD-CK Series
Item #
585600
Model
TE-5.5-MD-CK
TE-5.5-MD-HC Series
Item #
585604
Model
TE-5.5-MD-HC
TE-6-MD-CK Series
Item #
586600
586610
Model
TE-6-MD-CK
TE-6-MD-CK
TE-6-MD-HC Series
Item #
586604
586638
Model
TE-6-MD-HC
TE-6-MD-HC
TE-7-MD-HC Series
Item #
587010
587039
587040
Model
TE-7-MD-HC
TE-7-MD-HC
TE-7-MD-HC
TE-7-MD-CK Series
Item #
587600
587603
Model
TE-7-MD-CK
TE-7-MD-CK
For additional information on Magnetic Drive Pumps refer to our Magnetic Drive
Catalog, form number 996869.
21
NOTES:
22
About Our Company.
In 2006, Franklin Electric Company
acquired Little Giant Pump Company to
solidify our position as a leading global
supplier of water pumping systems for
residential and commercial markets.
Little Giant® products – sump, sewage,
effluent, utility, condensate removal, and
submersible industrial pumps – complement
and broaden Franklin Electric’s overall
water systems offering.
Little Giant Pump Company, now Franklin
Electric – offers the industry a wellrespected brand of products – Little Giant.
Founded on quality, availability, service,
innovation and value, Franklin Electric
continues to bring the Little Giant brand
name advantage through Pumps. People.
Partnerships.
Franklin Electric is a global leader in the
production and marketing of systems and
components for the movement of water
and automotive fuels. Recognized as a
technical leader in its specialties, Franklin
serves customers around the world in
residential, commercial, agricultural,
industrial, municipal, and fueling
applications.
Long recognized as the world’s largest
manufacturer of submersible electric
motors, Franklin Electric has been able to
leverage its expertise in motor applications
to grow and serve several different
markets. The principal application for
Franklin products is water well pumping
systems, where the company offers pumps,
motors, drives, and controls. In addition,
Franklin Electric produces a vast array of
products for fueling systems and the water
transfer market.
With 3,500 employees worldwide, Franklin
Electric is a global manufacturer with over
25 manufacturing and distribution facilities
located in the United States, Germany,
Czech Republic, Italy, Mexico, Canada,
Australia, Brazil, South Africa, China, and
Japan.
Little Giant products are produced to the
following ISO standards:
Quality – 9001:2000
Environmental – 14001:2004
Franklin Electric
3810 North Tulsa
Oklahoma City, OK 73112
Tel: +1 405-947-2511
Fax: +1 405-942-2431
Email: export@LittleGiantPump.com
www.LittleGiantPump.com
©2010 Franklin Electric Co., Inc.
Little Giant® is a registered trademark of Franklin Electric Co., Inc.
Form 995620 4/10
Download PDF