Washer extractors High Spin washer extractors TP HIGH SPIN WASHER EXTRACTOR, LA-14 TP E Article DIMENSIONS Packed Length mm 788,00 830,00 Depth mm 870,00 1.010,00 Height mm 1.301,00 1.560,00 Weigth Kg 250,00 283,00 Volumen m3 1,31 ELECTRICITY Electric power 9,50 KW OPC2x16+T-63A 230V -1+N 3x6+T -40 A 230V - III 4x2,5+T - 25 A 400V - III+N WATER 168,00 Water consumption (lit/h) 2-4 Pressure (Kg/cm2) GAS Not used STEAM Not used AIR Not used LEVEL SOUND (dB) HIGH SPIN WASHER EXTRACTOR, LA-14 TP E Made of stainless steel. Capacity: 14 kg (1:9) or 13 kg (1:10). Microprocessor “Touch Plus Control” with display . 26 pre-set programs (4 economic programs). Possibility of programming, export and import programs through USB memory, without limite. “WASH CONTROL” management software included. Digital sequence display. 8 signals for automatic liquid dosing, programmable in time and delay. Possibility to install an automatic detergent doser on the rear of the machine. Detergent dispenser with 4 compartments (pre-wash, wash, bleachers and softeners). Water levels completely modifiable. 3 water inlets (Hot water, Cold water, Soft water). WET CLEANING SYSTEM: -Water levels completely modifiable. -Possible manual dosing for evey 8 signals during the cycle. -Minimum washing speed: 15 r.p.m. -Minimum thythm ON-OF: 1 second. Safety switch for door opening. Wash and spin speeds are configurable . These machines have electronic control of imbalance with frequency variator, that detects the load uncentered before spinning. No need to be fixed to the floor. Drum diameter: 620 mm. Deepth drum: 430 mm. Door diameter: 373 mm. Spin speed: 1.150 r.p.m. G Factor: 450. Easy to attach automatic dosser dispenser at rear of machine. Water consumption in program nº 2 60º: 168 litres. Heating system: Electric. Elements heating power: 9 kW. Total power: 9,50 kW. Dimensions: 788 x 869 x 1.301 mm 60,00 Connections points X ELECTRICITY 108 Y 0 1.022 Z Diameter SOFT COLD WATER 494 0 1.202 DRAIN 252 0 130 COLD WATER 714 0 1.222 3/4" HOT WATER 554 0 1.202 3/4" Information 0 3/4" 3"